ExaltComProducts
Exalt CommunicationsExalt devices
snmptranslate -m ExaltComProducts -Tpsnmpwalk -v2c -c <community> -m ExaltComProducts <host> 1.3.6.1.4.1.25651.1Imports
| ExaltComm | AcmModulationT, AlarmLevelT, AuxNmsMode, EnableStatusT, EthAuxStatusT, EthMainStatusT, EthPortMode, ExaltEnableT, FileTransferStartT, FileTransferTypeT, Led4ColorT, NtpClientEnableT, Te1LboT, Te1LineCodeT, Te1LoopBackModeT, Te1StatusT, TimeZoneT, VlanGroupT, VlanStatusT, exaltcommunications |
|---|---|
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | Bits, Gauge32, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso |
| SNMPv2-TC | DisplayString, PhysAddress, TEXTUAL-CONVENTION |
OID tree
| Name | OID | Type | Access | Status |
|---|---|---|---|---|
| IproductsMIB | 1.3.6.1.4.1.25651.1 | |||
identity Exalt devices | ||||
| NproductsMIBNotifications | 1.3.6.1.4.1.25651.1.1 | |||
| NproductsMIBObjects | 1.3.6.1.4.1.25651.1.2 | |||
| NradioInfo | 1.3.6.1.4.1.25651.1.2.1 | |||
node · current Common Radio Information to all Exalt devices. | ||||
| SmodelName | 1.3.6.1.4.1.25651.1.2.1.1 | DisplayString (SIZE (0..20)) | RO | |
scalar · DisplayString (SIZE (0..20)) · read-only · current A descriptive name for the Radio. See Web, Radio Information, Model Name. | ||||
| SpartNumber | 1.3.6.1.4.1.25651.1.2.1.2 | DisplayString (SIZE (0..20)) | RO | |
scalar · DisplayString (SIZE (0..20)) · read-only · current The Part Number of the Radio. See Web, Radio Information, Part Number. | ||||
| SserialNumber | 1.3.6.1.4.1.25651.1.2.1.3 | DisplayString (SIZE (0..20)) | RO | |
scalar · DisplayString (SIZE (0..20)) · read-only · current The Radio Serial Number. See Web, Radio Inforamtion, Serial Number. | ||||
| SinterfaceType | 1.3.6.1.4.1.25651.1.2.1.4 | DisplayString (SIZE (0..30)) | RO | |
scalar · DisplayString (SIZE (0..30)) · read-only · current The Interfaces available on this radio. Ethernet, T1/E1, etc. See Web, Radio Information, Interface Type. | ||||
| SfirmwareVersion | 1.3.6.1.4.1.25651.1.2.1.5 | DisplayString (SIZE (0..32)) | RO | |
scalar · DisplayString (SIZE (0..32)) · read-only · current The Radio Firmware Version. See Web, Radio Information, Firmware Version. | ||||
| SbootVersion | 1.3.6.1.4.1.25651.1.2.1.6 | DisplayString (SIZE (0..32)) | RO | |
scalar · DisplayString (SIZE (0..32)) · read-only · current The Radio Boot Code Version. See Web, Radio Information, Boot Version. | ||||
| SrdkDbVer | 1.3.6.1.4.1.25651.1.2.1.11 | DisplayString (SIZE (0..32)) | RO | |
scalar · DisplayString (SIZE (0..32)) · read-only · current The Device RDK Database Version. See Web, Radio Information, RDK Database Version. | ||||
| StxFreqRange | 1.3.6.1.4.1.25651.1.2.1.12 | DisplayString (SIZE (0..32)) | RO | |
scalar · DisplayString (SIZE (0..32)) · read-only · current The Radio Tx Frequency Range. FDD radios have a Tx and Rx frequency range. See Web, Radio Information, RF Transmit range. TDD radios have one frequency range. See Web, Radio Information, RF Frequency Band. | ||||
| SrxFreqRange | 1.3.6.1.4.1.25651.1.2.1.13 | DisplayString (SIZE (0..32)) | RO | |
scalar · DisplayString (SIZE (0..32)) · read-only · current The Radio Rx Frequency Range. FDD radios have a Tx and Rx frequency range. See Web, Radio Information, RF Receive range. TDD radios have one frequency range. See Web, Radio Information, RF Frequency Band. | ||||
| SrfFreqBand | 1.3.6.1.4.1.25651.1.2.1.14 | DisplayString (SIZE (0..32)) | RO | |
scalar · DisplayString (SIZE (0..32)) · read-only · current The Device Frequency Band (Range). TDD radios have N/A value in this field. FDD radios have TX High or TX Low depending on used diplexer and Transmit frequency. See Web, Radio Information, Tx Band. | ||||
| ShwId | 1.3.6.1.4.1.25651.1.2.1.15 | DisplayString (SIZE (0..32)) | RO | |
scalar · DisplayString (SIZE (0..32)) · read-only · current The Device Hardware ID number. See Web, Radio Information, Hardware ID number | ||||
| SmodelNumber | 1.3.6.1.4.1.25651.1.2.1.16 | DisplayString (SIZE (0..32)) | RO | |
scalar · DisplayString (SIZE (0..32)) · read-only · current The Model Number of the Radio. See Web, Radio Information, Model Number | ||||
| SlicenseFeatures | 1.3.6.1.4.1.25651.1.2.1.17 | DisplayString (SIZE (0..128)) | RO | |
scalar · DisplayString (SIZE (0..128)) · read-only · current The list of the features enabled by License Key | ||||
| NradioAdmin | 1.3.6.1.4.1.25651.1.2.2 | |||
node · current Radio Administration parameters. | ||||
| SsysDate | 1.3.6.1.4.1.25651.1.2.2.1 | DisplayString (SIZE (10)) | RW | |
scalar · DisplayString (SIZE (10)) · read-write · current The Radio System Date, MM/DD/YYYY. See Web, Administration, Settings, Date. To make permanent, write save to commitAdminSettings after change. After commit, SNMP restarts and will be down for 30 seconds.
| ||||
| SsysTime | 1.3.6.1.4.1.25651.1.2.2.2 | DisplayString (SIZE (8)) | RW | |
scalar · DisplayString (SIZE (8)) · read-write · current The Radio System Time, HH:MM:SS, as 24 hours. See Web, Administration, Settings, Time. To make permanent, write save to commitAdminSettings after change. After commit, SNMP restarts and will be down for 30 seconds. | ||||
| NradioName | 1.3.6.1.4.1.25651.1.2.2.3 | |||
| SrnLocal | 1.3.6.1.4.1.25651.1.2.2.3.1 | DisplayString (SIZE (1..32)) | RW | |
scalar · DisplayString (SIZE (1..32)) · read-write · current The user specifiable Radio Name for this radio. See Web, Administration, Settings, Radio Name. To make permanent, write save to commitAdminSettings after change. | ||||
| SrnRemote | 1.3.6.1.4.1.25651.1.2.2.3.2 | DisplayString (SIZE (0..32)) | RO | |
scalar · DisplayString (SIZE (0..32)) · read-only · current The Radio Name of the Radio at the far end of this RF Link. Can only be set at that radio. See Web, Administration, Settings, Radio Name. | ||||
| SlinkName | 1.3.6.1.4.1.25651.1.2.2.4 | DisplayString (SIZE (0..32)) | RW | |
scalar · DisplayString (SIZE (0..32)) · read-write · current The user specifiable Link Name for this radio. See Web, Administration, Settings, Link Name. To make permanent, write save to commitAdminSettings after change. | ||||
| SlinkSecKey | 1.3.6.1.4.1.25651.1.2.2.5 | DisplayString (SIZE (12)) | RW | |
scalar · DisplayString (SIZE (12)) · read-write · current The Link Security Key must match on both ends of an RF Link for traffic to pass. See Web, Administration, Settings, Link Security Key. To make permanent, write save to commitAdminSettings after change. | ||||
| SadminPassword | 1.3.6.1.4.1.25651.1.2.2.6 | DisplayString (SIZE (1..16)) | RW | |
scalar · DisplayString (SIZE (1..16)) · read-write · current The password for admin login to Web/CLI. See Web, Administration, Settings, Admin Password. To make permanent, write save to commitAdminSettings after change. | ||||
| SuserPassword | 1.3.6.1.4.1.25651.1.2.2.7 | DisplayString (SIZE (1..16)) | RW | |
scalar · DisplayString (SIZE (1..16)) · read-write · current The password for user login to Web/CLI. See Web, Administration, Settings, User Password. To make permanent, write save to commitAdminSettings after change. | ||||
| NipAddress | 1.3.6.1.4.1.25651.1.2.2.8 | |||
| SipLocal | 1.3.6.1.4.1.25651.1.2.2.8.1 | IpAddress | RW | |
scalar · IpAddress · read-write · current The IP address of local radio. This IP address is used to manage radio. See Web, Administration, Settings, IP Address. To make permanent, write save to commitAdminSettings after change. | ||||
| SipRemote | 1.3.6.1.4.1.25651.1.2.2.8.2 | IpAddress | RO | |
scalar · IpAddress · read-only · current The IP address of the remote Radio. This IP address is used to manage Remote radio. Can only be set at that radio. See Web, Administration, Settings, IP Address. | ||||
| SsubnetMask | 1.3.6.1.4.1.25651.1.2.2.9 | IpAddress | RW | |
scalar · IpAddress · read-write · current The Subnet Mask for IP address of local radio. See Web, Administration, Settings, IP Mask. To make permanent, write save to commitAdminSettings after change. | ||||
| SipAddressNetmask | 1.3.6.1.4.1.25651.1.2.2.10 | DisplayString (SIZE (9..18)) | RW | |
scalar · DisplayString (SIZE (9..18)) · read-write · current The IP address and Subnet Mask of local radio. ie 10.0.0.1/24. To make permanent, write save to commitAdminSettings after change.
| ||||
| SdefaultGateway | 1.3.6.1.4.1.25651.1.2.2.11 | IpAddress | RW | |
scalar · IpAddress · read-write · current The Default Gateway for local radio port. See Web, Administration, Settings, Default Gateway. To make permanent, write save to commitAdminSettings after change. | ||||
| SaesEnable | 1.3.6.1.4.1.25651.1.2.2.12 | INTEGER | RW | |
scalar · INTEGER · read-write · current The AES enable(0)/disable(1). AES (Advance Encryption Standard) can be implemented to provide additional data security for the wireless link. This function requires an upgrade license key (purchased separately). See Web, Administration, Settings, AES Settings, Enable AES. To make permanent, write save to commitAdminSettings after change.
| ||||
| SaesKey | 1.3.6.1.4.1.25651.1.2.2.13 | DisplayString (SIZE (1..64)) | RW | |
scalar · DisplayString (SIZE (1..64)) · read-write · current The symmetric AES key for encrypt/decrypt payload data. Different bitlength encryption license keys (for example, 128-bit and 256-bit) are available, depending on model type and license type. AES Key should match both on local radio and far end radio. See Web, Administration, Settings, AES Settings, AES Key. To make permanent, write save to commitAdminSettings after change. | ||||
| SlicKey | 1.3.6.1.4.1.25651.1.2.2.14 | DisplayString (SIZE (1..32)) | RW | |
scalar · DisplayString (SIZE (1..32)) · read-write · current The license key which defines radio features and capabilities. See Web, Administration, Settings, License Key. To make permanent, write save to commitAdminSettings after change. | ||||
| NsnmpConfig | 1.3.6.1.4.1.25651.1.2.2.17 | |||
| StrapIpaddr1 | 1.3.6.1.4.1.25651.1.2.2.17.1 | IpAddress | RW | |
scalar · IpAddress · read-write · current The IP address to which the SNMP traps are directed. See Web, Administration, SNMP, Traps, Trap Destination IP Address. | ||||
| StrapIpaddrEnable1 | 1.3.6.1.4.1.25651.1.2.2.17.2 | EnableStatusT | RO | |
scalar · EnableStatusT · read-only · current Enable/Disable trap ip address. | ||||
| StrapIpaddr2 | 1.3.6.1.4.1.25651.1.2.2.17.3 | IpAddress | RW | |
scalar · IpAddress · read-write · current The IP address to which the SNMP traps are directed. See Web, Administration, SNMP, Traps, Trap Destination IP Address. | ||||
| StrapIpaddrEnable2 | 1.3.6.1.4.1.25651.1.2.2.17.4 | EnableStatusT | RW | |
scalar · EnableStatusT · read-write · current Enable/Disable trap ip address. | ||||
| StrapIpaddr3 | 1.3.6.1.4.1.25651.1.2.2.17.5 | IpAddress | RW | |
scalar · IpAddress · read-write · current The IP address to which the SNMP traps are directed. See Web, Administration, SNMP, Traps, Trap Destination IP Address. | ||||
| StrapIpaddrEnable3 | 1.3.6.1.4.1.25651.1.2.2.17.6 | EnableStatusT | RW | |
scalar · EnableStatusT · read-write · current Enable/Disable trap ip address. | ||||
| StrapIpaddr4 | 1.3.6.1.4.1.25651.1.2.2.17.7 | IpAddress | RW | |
scalar · IpAddress · read-write · current The IP address to which the SNMP traps are directed. See Web, Administration, SNMP, Traps, Trap Destination IP Address. | ||||
| StrapIpaddrEnable4 | 1.3.6.1.4.1.25651.1.2.2.17.8 | EnableStatusT | RW | |
scalar · EnableStatusT · read-write · current Enable/Disable trap ip address. | ||||
| StrapAuth | 1.3.6.1.4.1.25651.1.2.2.17.9 | EnableStatusT | RW | |
scalar · EnableStatusT · read-write · current Authentication trap enable(1)/disable(0). This is an SNMP standard trap when password information for SNMP is incorrect. See Web, Administration, SNMP, Traps, Authentication Trap. | ||||
| StrapReboot | 1.3.6.1.4.1.25651.1.2.2.17.10 | EnableStatusT | RW | |
scalar · EnableStatusT · read-write · current Reboot trap enable(0)/disable(1). This trap is sent after any radio reboot to inform the manager of the reboot status. See Web, Administration, SNMP, Traps, Radio Reboot Trap. | ||||
| StrapLocLinkStat | 1.3.6.1.4.1.25651.1.2.2.17.11 | EnableStatusT | RW | |
scalar · EnableStatusT · read-write · current Local Link Status trap enable(0)/disable(1). This trap is sent when Link is in errored state (equivalent to the Link LED). See Web, Administration, SNMP, Traps, Local Link Status Trap. | ||||
| StrapLocAlarmStat | 1.3.6.1.4.1.25651.1.2.2.17.12 | EnableStatusT | RW | |
scalar · EnableStatusT · read-write · current Local Alarm Status trap enable(0)/disable(1). This trap is sent when local radio Status is in errored state (equivalent to the Status LED). See Web, Administration, SNMP, Traps, Local Radio Status Trap. | ||||
| StrapRemAlarmStat | 1.3.6.1.4.1.25651.1.2.2.17.13 | EnableStatusT | RW | |
scalar · EnableStatusT · read-write · current Remote Alarm Status trap enable(0)/disable(1). This trap is sent when remote radio Status is in errored state (equivalent to the Status LED). See Web, Administration, SNMP, Traps, Remote Radio Status Trap. | ||||
| StrapLocTempStat | 1.3.6.1.4.1.25651.1.2.2.17.14 | EnableStatusT | RW | |
scalar · EnableStatusT · read-write · current Local Temperature Status trap enable(0)/disable(1). This trap is sent when the internal temperature reaches the warning point. See Web, Administration, SNMP, Traps, Temperature Status Trap. | ||||
| Strapv1Enable | 1.3.6.1.4.1.25651.1.2.2.17.15 | EnableStatusT | RW | |
scalar · EnableStatusT · read-write · current SNMPv1 Traps enable(0)/disable(1). Enables traps for SNMP protocol version 1. See Web, Administration, SNMP, Traps, Enable SNMPv1 Traps. | ||||
| Strapv2cEnable | 1.3.6.1.4.1.25651.1.2.2.17.16 | EnableStatusT | RW | |
scalar · EnableStatusT · read-write · current SNMPv2c Traps enable(0)/disable(1). Enables traps for SNMP protocol version 2c. See Web, Administration, SNMP, Traps, Enable SNMPv2c Traps. | ||||
| Strapv3Enable | 1.3.6.1.4.1.25651.1.2.2.17.17 | EnableStatusT | RW | |
scalar · EnableStatusT · read-write · current SNMPv3 Traps enable(0)/disable(1). Enables traps for SNMP protocol version 3. See Web, Administration, SNMP, Traps, Enable SNMPv3 Traps. | ||||
| StrapLocRslStat | 1.3.6.1.4.1.25651.1.2.2.17.18 | EnableStatusT | RW | |
scalar · EnableStatusT · read-write · current Local RSL Status trap enable(0)/disable(1). This trap is sent when the local RSL drops below the value set in the RSL Threshold Value (dBm) field. See Web, Administration, SNMP, Traps, Local RSL Status Trap. | ||||
| StrapLocRslThreshold | 1.3.6.1.4.1.25651.1.2.2.17.19 | INTEGER | RW | |
scalar · INTEGER · read-write · current Local RSL Threshold. Exalt recommends that this trap be set to a value 5dBm or 10dBm above the threshold as a warning that the system has faded and may be approaching an outage. See Web, Administration, SNMP, Traps, Threshold Value. | ||||
| ScommitSnmpSettings | 1.3.6.1.4.1.25651.1.2.2.17.1000 | DisplayString (SIZE (4..200)) | RW | |
scalar · DisplayString (SIZE (4..200)) · read-write · current Option strings to be written are: save, clear, correspondingly saving changes to configuration to the persistent storage or clearing unsaved changes. | ||||
| Nntp | 1.3.6.1.4.1.25651.1.2.2.18 | |||
node · current NTP and Time zone configuration. | ||||
| SntpClientEnable | 1.3.6.1.4.1.25651.1.2.2.18.1 | NtpClientEnableT | RW | |
scalar · NtpClientEnableT · read-write · current this mib to enable/disable the NTP client in the radio. 0 - disable NTP client. 1 - enable with 1 NTP server. 2 - enable with 2 NTP servers. 3 - enable with 3 NTP servers. 4 - enable with 4 NTP servers. | ||||
| SntpServer1IpAddr | 1.3.6.1.4.1.25651.1.2.2.18.2 | DisplayString (SIZE (7..15)) | RW | |
scalar · DisplayString (SIZE (7..15)) · read-write · current IP address for the first NTP server in xxx.xxx.xxx.xxx format | ||||
| SntpServer2IpAddr | 1.3.6.1.4.1.25651.1.2.2.18.3 | DisplayString (SIZE (7..15)) | RW | |
scalar · DisplayString (SIZE (7..15)) · read-write · current IP address for the second NTP server in xxx.xxx.xxx.xxx format | ||||
| SntpServer3IpAddr | 1.3.6.1.4.1.25651.1.2.2.18.4 | DisplayString (SIZE (7..15)) | RW | |
scalar · DisplayString (SIZE (7..15)) · read-write · current IP address for the third NTP server in xxx.xxx.xxx.xxx format | ||||
| SntpServer4IpAddr | 1.3.6.1.4.1.25651.1.2.2.18.5 | DisplayString (SIZE (7..15)) | RW | |
scalar · DisplayString (SIZE (7..15)) · read-write · current IP address for the forth NTP server in xxx.xxx.xxx.xxx format | ||||
| SntpTimeZoneSelect | 1.3.6.1.4.1.25651.1.2.2.18.6 | TimeZoneT | RW | |
scalar · TimeZoneT · read-write · current Time Zone selection. 0 - (GMT-11:00) Samoa 1 - (GMT-10.00) Hawaii 2 - (GMT-09:00) Alaska 3 - (GMT-08:00) Pacific Time 4 - (GMT-07:00) Arizona 5 - (GMT-07:00) Montain Time 6 - (GMT-06:00) Central Time 7 - (GMT-05:00) Eastern Time 8 - (GMT-05:00) Indiana (East) 9 - (GMT-04:00) Atlantic Time (Canada) 10- (GMT) Coordinated Universal Time 11- (GMT) London 12- (GMT+01:00) Berlin 13- (GMT+01:00) Belgrade 14- (GMT+01:00) Paris 15- (GMT+02:00) Cairo 16- (GMT+02:00) Helsinki 17- (GMT+03:00) Baghdad 18- (GMT+03:00) Moscow 19- (GMT+03:30) Tehran 20- (GMT+04:30) Kabul 21- (GMT+05:00) Karachi 22- (GMT+07:00) Bangkok 23- (GMT+08:00) Shanghai 24- (GMT+08:00) Taipei 25- (GMT+09:00) Tokyo 26- (GMT+09:00) Seoul 27- (GMT+10:00) Sydney 28- (GMT+10:00) Vladivostok | ||||
| ScommitNtpSettings | 1.3.6.1.4.1.25651.1.2.2.18.1000 | DisplayString (SIZE (4..200)) | RW | |
scalar · DisplayString (SIZE (4..200)) · read-write · current This command allows saving or clear the NTP and Tome Zone configuration. If the save includes the change of time zone, the radio will automatically reboot to take effect the newly selected time zone. Option strings to be written are: save, clear, correspondingly saving changes to configuration to the persistent storage or clearing unsaved changes. | ||||
| ScommitAdminSettings | 1.3.6.1.4.1.25651.1.2.2.1000 | DisplayString (SIZE (4..200)) | RW | |
scalar · DisplayString (SIZE (4..200)) · read-write · current The Commit Administration settings command. Valid values: 'save', 'clear'. Configuration changes via SNMP do not take effect until 'save' (Commit) command is sent to this parameter. 'clear' (Cancel) command is used to cancel configuration changes before commit operation. In case of invalid configuration this parameter contains text description of the problem. | ||||
| NradioConfig | 1.3.6.1.4.1.25651.1.2.3 | |||
node · current The Radio Configuration Section. | ||||
| NsystemConfig | 1.3.6.1.4.1.25651.1.2.3.1 | |||
node · current This is the device specific configuration section. | ||||
| ScommitSystemSettings | 1.3.6.1.4.1.25651.1.2.3.1.1000 | DisplayString | RW | |
scalar · DisplayString · read-write · current The Commit System Configuration settings command. Valid values: 'save', 'clear'. Configuration changes via SNMP do not take effect until 'save' (Commit) command is sent to this parameter. 'clear' (Cancel) command is used to cancel configuration changes before commit operation. In case of invalid configuration this parameter contains text description of the problem. | ||||
| Ninterface | 1.3.6.1.4.1.25651.1.2.3.2 | |||
node · current Radio Interfaces Configuration section. | ||||
| Nte1 | 1.3.6.1.4.1.25651.1.2.3.2.2 | |||
node · current T1,E1 interfaces Configuration section. Section allows to configure T1/E1 ports on the radio if any. | ||||
| Ste1NumChannels | 1.3.6.1.4.1.25651.1.2.3.2.2.1 | Gauge32 | RO | |
scalar · Gauge32 · read-only · current The Number of T1 or E1 channels supported by the Radio.
| ||||
| Ste1NumActiveChannels | 1.3.6.1.4.1.25651.1.2.3.2.2.2 | Gauge32 | RO | |
scalar · Gauge32 · read-only · current The Current number of channels available, based on bandwitdh of the RF link and the license key.
| ||||
| SselectT1orE1 | 1.3.6.1.4.1.25651.1.2.3.2.2.3 | INTEGER | RW | |
scalar · INTEGER · read-write · current Select operation mode of T1/E1 interfaces. Either T1(0) or E1(1). See Web, Configuration, Interface, T1/E1, Set To E1/T1 Mode button.
| ||||
| Tte1Interfaces | 1.3.6.1.4.1.25651.1.2.3.2.2.4 | NA | ||
table · not-accessible · current Attributes for T1 or E1 ports. | ||||
| Rte1Interface | 1.3.6.1.4.1.25651.1.2.3.2.2.4.1 | NA | ||
row · not-accessible · current An entry in the T1/E1 Attribute table.
| ||||
| Cte1Status | 1.3.6.1.4.1.25651.1.2.3.2.2.4.1.1 | Te1StatusT | RW | |
column · Te1StatusT · read-write · current The T1/E1 status: enable(1)/disable(0). Parameter allows to enable/disable each individual T1 channel. See Web, Configuration, Interface, T1/E1, Status. To make permanent, write save to commitTe1Settings after change. | ||||
| Ct1LBO | 1.3.6.1.4.1.25651.1.2.3.2.2.4.1.2 | Te1LboT | RW | |
column · Te1LboT · read-write · current The Line Build Out length range. Valid values (ft): lbo0to133(0), lbo133to266(1), lbo266to399(2), lbo399to533(3), lbo533to655(4). See Web, Configuration, Interface, T1/E1, LBO. To make permanent, write save to commitTe1Settings after change.
| ||||
| Cte1AIS | 1.3.6.1.4.1.25651.1.2.3.2.2.4.1.3 | Te1StatusT | RW | |
column · Te1StatusT · read-write · current The T1/E1 AIS enabled flag: enable(1)/disable(0). If enabled, the radio places an AIS code on the output of the associated interface if and when the link fails or when there is no E1 signal available from the far end to provide the user at the local end. See Web, Configuration, Interface, T1/E1, AIS. To make permanent, write save to commitTe1Settings after change. | ||||
| Ct1LineCode | 1.3.6.1.4.1.25651.1.2.3.2.2.4.1.4 | Te1LineCodeT | RW | |
column · Te1LineCodeT · read-write · current The T1/E1 Line Code type: b8zs(0), ami(1). See Web, Configuration, Interface, T1/E1, AIS, Line Code. To make permanent, write save to commitTe1Settings after change. | ||||
| Cte1LoopBackMode | 1.3.6.1.4.1.25651.1.2.3.2.2.4.1.5 | Te1LoopBackModeT | RW | |
column · Te1LoopBackModeT · read-write · current The Loop Back Mode for a T1/E1 interface. Valid values: disabled(0), ExternalLocal(1), ExternalRemote(2), Internal(3). All loopback configurations control the loop at the Line Interface integrated circuit, which is the device wired directly to the front panel ports. See Web, Configuration, Interface, T1/E1, AIS, Loopback. To make permanent, write save to commitTe1Settings after change. | ||||
| ScommitTe1Settings | 1.3.6.1.4.1.25651.1.2.3.2.2.1000 | DisplayString (SIZE (4..200)) | RW | |
scalar · DisplayString (SIZE (4..200)) · read-write · current The Commit TE1 Configuration settings command. Valid values: 'save', 'clear'. Configuration changes to TE1 ports via SNMP do not take effect until 'save' (Commit) command is sent to this parameter. 'clear' (Cancel) command is used to cancel configuration changes before commit operation. In case of invalid configuration this parameter contains text description of the problem. | ||||
| NfileManagement | 1.3.6.1.4.1.25651.1.2.3.3 | |||
node · current The File Management Section. This section allows to initiate Upload/Download firmware/configuration/logs, perform Firmware activation procedure. | ||||
| ScurrentFwFilename | 1.3.6.1.4.1.25651.1.2.3.3.1 | DisplayString (SIZE (0..100)) | RO | |
scalar · DisplayString (SIZE (0..100)) · read-only · current The file name of the currently running firmware. See Web, Administration, File Management, File Activation, Current File. | ||||
| SalternateFwFilename | 1.3.6.1.4.1.25651.1.2.3.3.2 | DisplayString (SIZE (0..100)) | RO | |
scalar · DisplayString (SIZE (0..100)) · read-only · current The file name of the alternate firmware image. See Web, Administration, File Management, File Activation, Alternative File. | ||||
| SswapFWimage | 1.3.6.1.4.1.25651.1.2.3.3.3 | DisplayString (SIZE (0..200)) | RW | |
scalar · DisplayString (SIZE (0..200)) · read-write · current Swap the firmware images and restart radio. To perform swap operation 'swap' command needs to be sent to this parameter. For ExtendAirG2 to perform revert to factory operation 'factory' command needs to be sent. Radio will become unavailable for several minutes. | ||||
| NfileTransfer | 1.3.6.1.4.1.25651.1.2.3.3.4 | |||
node · current The File Transfer Section. This section allows to initiate Upload/Download firmware/configuration/logs over TFTP protocol. | ||||
| StftpServerIp | 1.3.6.1.4.1.25651.1.2.3.3.4.1 | DisplayString (SIZE (7..15)) | RW | |
scalar · DisplayString (SIZE (7..15)) · read-write · current The TFTP Server IP address. | ||||
| SuploadFilename | 1.3.6.1.4.1.25651.1.2.3.3.4.2 | DisplayString (SIZE (0..127)) | RW | |
scalar · DisplayString (SIZE (0..127)) · read-write · current The name of the file for upload operation. For configuration file uploadFilename should be always 'config.xml'. uploadFilename value should match the file name in TFTP server folder. | ||||
| StransferType | 1.3.6.1.4.1.25651.1.2.3.3.4.3 | FileTransferTypeT | RW | |
scalar · FileTransferTypeT · read-write · current The file transfer type. Valid values: - uploadFirmware(0) - uploadConfig(1) - uploadRDD(2) (Valid only for TDD radios) - downloadFirmware(3) - downloadConfig(4) - downloadMIBs(5) - downloadEventLogs(6). The actual operation starts via updating transferStart parameter value. | ||||
| StransferStart | 1.3.6.1.4.1.25651.1.2.3.3.4.4 | FileTransferStartT | RW | |
scalar · FileTransferStartT · read-write · current TransferStart parameter is used to initiate file transfer operation. Send startTransfer(1) to this parameter. | ||||
| StransferStatus | 1.3.6.1.4.1.25651.1.2.3.3.4.5 | DisplayString (SIZE (0..127)) | RO | |
scalar · DisplayString (SIZE (0..127)) · read-only · current The current file transfer status. | ||||
| SfactoryFwFilename | 1.3.6.1.4.1.25651.1.2.3.3.5 | DisplayString (SIZE (0..100)) | RO | |
scalar · DisplayString (SIZE (0..100)) · read-only · current The file name of the factory firmware image. See Web, Administration, File Management, File Activation, Factory File. | ||||
| NradioMonitor | 1.3.6.1.4.1.25651.1.2.4 | |||
node · current Monitor Various components. | ||||
| Nalarms | 1.3.6.1.4.1.25651.1.2.4.2 | |||
| NalmLocal | 1.3.6.1.4.1.25651.1.2.4.2.3 | |||
| NlocSysAlarms | 1.3.6.1.4.1.25651.1.2.4.2.3.1 | |||
| SlocLinkState | 1.3.6.1.4.1.25651.1.2.4.2.3.1.1 | AlarmLevelT | RO | |
scalar · AlarmLevelT · read-only · current The Link Status Alarm. Possible values: - almNORMAL(0) - Error-free connection (BER<10e-6) - almMINOR(1) - Errorred connection (BER<10e-3) - almMAJOR(2) - No link (BER>10e-3) See Web, Monitor, Alarms, Link | ||||
| SlocTempAlarm | 1.3.6.1.4.1.25651.1.2.4.2.3.1.2 | AlarmLevelT | RO | |
scalar · AlarmLevelT · read-only · current The Temperature Alarm state. Possible values: - almNORMAL(0) - Normal temprature range - almMINOR(1) - Exceeding normal temprature range See Web, Monitor, Alarms, Temperature | ||||
| SlocCurrentTemp | 1.3.6.1.4.1.25651.1.2.4.2.3.1.3 | Integer32 | RO | |
scalar · Integer32 · read-only · current The Internal Temperature in Celsius.
| ||||
| SlocCurrentTempS | 1.3.6.1.4.1.25651.1.2.4.2.3.1.4 | DisplayString | RO | |
scalar · DisplayString · read-only · current The Internal Temperature as a string. | ||||
| SlocLinkSecMismatch | 1.3.6.1.4.1.25651.1.2.4.2.3.1.9 | AlarmLevelT | RO | |
scalar · AlarmLevelT · read-only · current This is link security mismatch alarm. This alarm tells if the Link Security Key is matching or not. Possible values: - almNORMAL(0) - Link Secutiry keys match - almMAJOR(2) - Link Secutiry keys do not match | ||||
| SlocLinkStateV | 1.3.6.1.4.1.25651.1.2.4.2.3.1.15 | AlarmLevelT | RO | |
scalar · AlarmLevelT · read-only · current Vertical Link Status Alarm. -<g89><> | ||||
| SlocLinkStateH | 1.3.6.1.4.1.25651.1.2.4.2.3.1.16 | AlarmLevelT | RO | |
scalar · AlarmLevelT · read-only · current Horizontal Link Status Alarm. -<g89><> | ||||
| NlocEthAlarms | 1.3.6.1.4.1.25651.1.2.4.2.3.2 | |||
| NlocTe1Alarms | 1.3.6.1.4.1.25651.1.2.4.2.3.3 | |||
| SlocTe1LinkSummary | 1.3.6.1.4.1.25651.1.2.4.2.3.3.1 | Led4ColorT | RO | |
scalar · Led4ColorT · read-only · current The T1/E1 Link Summary LED color. | ||||
| TlocTE1Alarms | 1.3.6.1.4.1.25651.1.2.4.2.3.3.2 | NA | ||
table · not-accessible · current The Local T1/E1 Interface Alarms. | ||||
| RlocTe1AlarmsEntry | 1.3.6.1.4.1.25651.1.2.4.2.3.3.2.1 | NA | ||
| ClocTe1Alarm | 1.3.6.1.4.1.25651.1.2.4.2.3.3.2.1.1 | AlarmLevelT | RO | |
column · AlarmLevelT · read-only · current The Alarms state for the Local T1/E1 Channel. Possible values: - almNORMAL(0) - Enabled and connection present - almMAJOR(2) - Enabled and no connection present - almDisable(3) - Disabled and no connection present - almNotAvailable(4) - T1/E1 channel is not available See Web, Monitor, Alarms, T1/E1 Input | ||||
| NalmRemote | 1.3.6.1.4.1.25651.1.2.4.2.4 | |||
| NremSysAlarms | 1.3.6.1.4.1.25651.1.2.4.2.4.1 | |||
| SremLinkState | 1.3.6.1.4.1.25651.1.2.4.2.4.1.1 | AlarmLevelT | RO | |
scalar · AlarmLevelT · read-only · current The Link Status Alarm for far end radio. Possible values: - almNORMAL(0) - Error-free connection (BER<10e-6) - almMINOR(1) - Errorred connection (BER<10e-3) - almMAJOR(2) - No link (BER>10e-3) - almNotAvailable(4) - Telemetry is down See Web, Monitor, Alarms, Link | ||||
| SremTempAlarm | 1.3.6.1.4.1.25651.1.2.4.2.4.1.2 | AlarmLevelT | RO | |
scalar · AlarmLevelT · read-only · current The Temperature Alarm state for far end radio. Possible values: - almNORMAL(0) - Normal temprature range - almMINOR(1) - Exceeding normal temprature range - almNotAvailable(4) - Telemetry is down See Web, Monitor, Alarms, Temperature | ||||
| SremCurrentTemp | 1.3.6.1.4.1.25651.1.2.4.2.4.1.3 | Integer32 | RO | |
scalar · Integer32 · read-only · current The Internal Temperature in Celsius for far end radio.
| ||||
| SremCurrentTempS | 1.3.6.1.4.1.25651.1.2.4.2.4.1.4 | DisplayString | RO | |
scalar · DisplayString · read-only · current The internal Temperature as a string for far end radio. | ||||
| SremLinkSecMismatch | 1.3.6.1.4.1.25651.1.2.4.2.4.1.9 | AlarmLevelT | RO | |
scalar · AlarmLevelT · read-only · current This is link security mismatch alarm. This alarm tells if the Link Security Key is matching or not. Possible values: - almNORMAL(0) - Link Secutiry keys match - almMAJOR(2) - Link Secutiry keys do not match - almNotAvailable(4) - Telemetry is down | ||||
| SremLinkStateV | 1.3.6.1.4.1.25651.1.2.4.2.4.1.15 | AlarmLevelT | RO | |
scalar · AlarmLevelT · read-only · current Vertical Link Status Alarm. -<g89><> | ||||
| SremLinkStateH | 1.3.6.1.4.1.25651.1.2.4.2.4.1.16 | AlarmLevelT | RO | |
scalar · AlarmLevelT · read-only · current Horizontal Link Status Alarm. -<g89><> | ||||
| NremEthAlarms | 1.3.6.1.4.1.25651.1.2.4.2.4.2 | |||
| NremTe1Alarms | 1.3.6.1.4.1.25651.1.2.4.2.4.3 | |||
| SremTe1LinkSummary | 1.3.6.1.4.1.25651.1.2.4.2.4.3.1 | Led4ColorT | RO | |
scalar · Led4ColorT · read-only · current The T1/E1 Link Summary LED color. | ||||
| TremTE1Alarms | 1.3.6.1.4.1.25651.1.2.4.2.4.3.2 | NA | ||
table · not-accessible · current The Remotel T1/E1 Interface Alarms. | ||||
| RremTe1AlarmsEntry | 1.3.6.1.4.1.25651.1.2.4.2.4.3.2.1 | NA | ||
| CremTe1Alarm | 1.3.6.1.4.1.25651.1.2.4.2.4.3.2.1.1 | AlarmLevelT | RO | |
column · AlarmLevelT · read-only · current The Alarms state for the Local T1/E1 Channel of far end radio. Possible values: - almNORMAL(0) - Enabled and connection present - almMAJOR(2) - Enabled and no connection present - almDisable(3) - Disabled and no connection present - almNotAvailable(4) - Telemetry is down or T1/E1 channel is not available See Web, Monitor, Alarms, T1/E1 Input | ||||
| Nperformance | 1.3.6.1.4.1.25651.1.2.4.3 | |||
| NperfLocal | 1.3.6.1.4.1.25651.1.2.4.3.1 | |||
| SlocCurrentBER | 1.3.6.1.4.1.25651.1.2.4.3.1.1 | Integer32 | RO | |
scalar · Integer32 · read-only · current The Curent Bit-Error Rate as scaled integer for local radio. The BER multiplied by 1,000,000. If the link is operating perfectly, this should indicate zero. See Web, Monitor, Performance, Current BER
| ||||
| SlocCurrentBERstr | 1.3.6.1.4.1.25651.1.2.4.3.1.2 | DisplayString | RO | |
scalar · DisplayString · read-only · current The Current Bit-Error Rate as a string. | ||||
| SlocCurrentRSL | 1.3.6.1.4.1.25651.1.2.4.3.1.3 | Integer32 | RO | |
scalar · Integer32 · read-only · current Current RSL is the measurement of the received signal level. When the RSL falls below the threshold specification, the link disconnects and will not reconnect until the RSL is above the threshold specification. See Web, Monitor, Performance, Current RSL
| ||||
| SlocCurrentRSLstr | 1.3.6.1.4.1.25651.1.2.4.3.1.4 | DisplayString | RO | |
scalar · DisplayString · read-only · current The Current RSL as a string. | ||||
| SlocErrorDuration | 1.3.6.1.4.1.25651.1.2.4.3.1.5 | Integer32 | RO | |
scalar · Integer32 · read-only · current The Error Duration indicates the total number of seconds that occurred where there was at least one bit error since the last time that the radio statistics counter was reset. See Web, Monitor, Performance, Errored Seconds
| ||||
| SlocErrorDurationStr | 1.3.6.1.4.1.25651.1.2.4.3.1.6 | DisplayString | RO | |
scalar · DisplayString · read-only · current The Error Duration as a formatted string. | ||||
| SlocUnavailDuration | 1.3.6.1.4.1.25651.1.2.4.3.1.7 | Integer32 | RO | |
scalar · Integer32 · read-only · current Unavailable Duration keeps track of every second where the BER equals or exceeds 1x10-3, as well as any seconds where there is a complete loss of radio communication. See Web, Monitor, Performance, Unavailable Seconds
| ||||
| SlocUnavailDurationStr | 1.3.6.1.4.1.25651.1.2.4.3.1.8 | DisplayString | RO | |
scalar · DisplayString · read-only · current The Unavailable Duration as a formatted string. | ||||
| SlocMinRSL | 1.3.6.1.4.1.25651.1.2.4.3.1.9 | Integer32 | RO | |
scalar · Integer32 · read-only · current The Minimum RSL indicates the worst (lowest) received signal level that occurred since the last counter reset. See Web, Monitor, Performance, Minimum RSL
| ||||
| SlocMinRSLstr | 1.3.6.1.4.1.25651.1.2.4.3.1.10 | DisplayString | RO | |
scalar · DisplayString · read-only · current The Minimum RSL value as a string. | ||||
| SlocMinRSLtimestamp | 1.3.6.1.4.1.25651.1.2.4.3.1.11 | DisplayString | RO | |
scalar · DisplayString · read-only · current The Minimum RSL Timestamp indicates the date and time when the Minimum RSL occurred. See Web, Monitor, Performance, Minimum RSL Timestamp | ||||
| SlocMaxRSL | 1.3.6.1.4.1.25651.1.2.4.3.1.12 | Integer32 | RO | |
scalar · Integer32 · read-only · current The Maximum RSL indicates the best (highest) RSL that occurred since the last counter reset. See Web, Monitor, Performance, Maximum RSL
| ||||
| SlocMaxRSLstr | 1.3.6.1.4.1.25651.1.2.4.3.1.13 | DisplayString | RO | |
scalar · DisplayString · read-only · current The Maximum RSL level As string.
| ||||
| SlocSampleDuration | 1.3.6.1.4.1.25651.1.2.4.3.1.14 | Integer32 | RO | |
scalar · Integer32 · read-only · current The Sample Duration indicates the amount of time passed since the last counter reset. See Web, Monitor, Performance, Time Since Reset
| ||||
| SlocSampleDurationStr | 1.3.6.1.4.1.25651.1.2.4.3.1.15 | DisplayString | RO | |
scalar · DisplayString · read-only · current The Sample Duration value as a formatted string. | ||||
| TlocEthPerfInterfaces | 1.3.6.1.4.1.25651.1.2.4.3.1.16 | NA | ||
table · not-accessible · current Performance characteristics of local Ethernet interfaces | ||||
| RlocEthPerfInterfacesEntry | 1.3.6.1.4.1.25651.1.2.4.3.1.16.1 | NA | ||
row · not-accessible · current An entry in the Performance characteristics of local Ethernet interfaces table | ||||
| ClocEthUtilizationIn | 1.3.6.1.4.1.25651.1.2.4.3.1.16.1.1 | Integer32 (0..100) | RO | |
column · Integer32 (0..100) · read-only · current Inbound ethernet utilization (%). See Web, Analysis, Ethernet Utilization. | ||||
| ClocEthUtilizationOut | 1.3.6.1.4.1.25651.1.2.4.3.1.16.1.2 | Integer32 (0..100) | RO | |
column · Integer32 (0..100) · read-only · current Outbound ethernet utilization (%). See Web, Analysis, Ethernet Utilization. | ||||
| ClocEthSpeed | 1.3.6.1.4.1.25651.1.2.4.3.1.16.1.3 | DisplayString | RO | |
column · DisplayString · read-only · current Current Ethernet Speed. See Web, Monitor, Ethernet Performance. | ||||
| SlocEthUtilizationWatermarkEnabled | 1.3.6.1.4.1.25651.1.2.4.3.1.17 | ExaltEnableT | RW | |
scalar · ExaltEnableT · read-write · current Ethernet utilization watermark enable(1)/disable(0). See Web, Analysis, Ethernet Utilization, Ethernet Utilization Watermark. | ||||
| SlocEthUtilizationWatermark | 1.3.6.1.4.1.25651.1.2.4.3.1.18 | Integer32 (0..100) | RW | |
scalar · Integer32 (0..100) · read-write · current Ethernet utilization watermark level (%). See Web, Analysis, Ethernet Utilization, Watermark level. | ||||
| SlocEthUtilizationWatermarkTrapEnabled | 1.3.6.1.4.1.25651.1.2.4.3.1.19 | ExaltEnableT | RW | |
scalar · ExaltEnableT · read-write · current Ethernet utilization watermark trap enable(1)/disable(0). The watermark trap function allows administrators to receive an SNMP trap when watermark conditions are exceeded. See Web, Analysis, Ethernet Utilization, Enable Ethernet Utilization Trap. | ||||
| SlocEthUtilizationWatermarkTrapDuration | 1.3.6.1.4.1.25651.1.2.4.3.1.20 | Integer32 (0..1440) | RW | |
scalar · Integer32 (0..1440) · read-write · current Ethernet utilization trap limit in minutes/day (0-1440 minutes). See Web, Analysis, Ethernet Utilization, Send trap if watermark hit duration exceeds. | ||||
| SlocMaximumTxModulation | 1.3.6.1.4.1.25651.1.2.4.3.1.100 | AcmModulationT | RO | |
scalar · AcmModulationT · read-only · current The highest/maximum Tx modulation when ACM is enabled since the last counter reset. See Web, Monitor, Performance, Tx modulation. | ||||
| SlocActiveTxModulation | 1.3.6.1.4.1.25651.1.2.4.3.1.101 | AcmModulationT | RO | |
scalar · AcmModulationT · read-only · current The active Tx modulation when ACM is enabled. See Web, Monitor, Performance, Tx modulation. | ||||
| SlocMinimumTxModulation | 1.3.6.1.4.1.25651.1.2.4.3.1.102 | AcmModulationT | RO | |
scalar · AcmModulationT · read-only · current The lowest/minimum Tx modulation when ACM is enabled since the last counter reset. See Web, Monitor, Performance, Tx modulation. | ||||
| SlocMaximumRxModulation | 1.3.6.1.4.1.25651.1.2.4.3.1.103 | AcmModulationT | RO | |
scalar · AcmModulationT · read-only · current The highest/maximum Rx modulation when ACM is enabled since the last counter reset. See Web, Monitor, Performance, Rx modulation. | ||||
| SlocActiveRxModulation | 1.3.6.1.4.1.25651.1.2.4.3.1.104 | AcmModulationT | RO | |
scalar · AcmModulationT · read-only · current The active Rx modulation when ACM is enabled. See Web, Monitor, Performance, Rx modulation. | ||||
| SlocMinimumRxModulation | 1.3.6.1.4.1.25651.1.2.4.3.1.105 | AcmModulationT | RO | |
scalar · AcmModulationT · read-only · current The lowest/minimum Rx modulation when ACM is enabled since the last counter reset. See Web, Monitor, Performance, Rx modulation. | ||||
| SlocMaximumTxEthernetThroughput | 1.3.6.1.4.1.25651.1.2.4.3.1.106 | INTEGER | RO | |
scalar · INTEGER · read-only · current The highest/maximum Tx Ethernet throughput in Mbps when ACM is enabled since the last counter reset. See Web, Monitor, Performance, Tx Ethernet Throughput. | ||||
| SlocActiveTxEthernetThroughput | 1.3.6.1.4.1.25651.1.2.4.3.1.107 | INTEGER | RO | |
scalar · INTEGER · read-only · current The active Tx Ethernet throughput in Mbps when ACM is enabled. See Web, Monitor, Performance, Tx Ethernet Throughput. | ||||
| SlocMinimumTxEthernetThroughput | 1.3.6.1.4.1.25651.1.2.4.3.1.108 | INTEGER | RO | |
scalar · INTEGER · read-only · current The lowest/minimum Tx Ethernet throughput in Mbps when ACM is enabled since the last counter reset. See Web, Monitor, Performance, Tx Ethernet Throughput. | ||||
| SlocMaximumRxEthernetThroughput | 1.3.6.1.4.1.25651.1.2.4.3.1.109 | INTEGER | RO | |
scalar · INTEGER · read-only · current The highest/maximum Rx Ethernet throughput in Mbps when ACM is enabled since the last counter reset. See Web, Monitor, Performance, Rx Ethernet Throughput. | ||||
| SlocActiveRxEthernetThroughput | 1.3.6.1.4.1.25651.1.2.4.3.1.110 | INTEGER | RO | |
scalar · INTEGER · read-only · current The active Rx Ethernet throughput in Mbps when ACM is enabled. See Web, Monitor, Performance, Rx Ethernet Throughput. | ||||
| SlocMinimumRxEthernetThroughput | 1.3.6.1.4.1.25651.1.2.4.3.1.111 | INTEGER | RO | |
scalar · INTEGER · read-only · current The lowest/minimum Rx Ethernet throughput in Mbps when ACM is enabled since the last counter reset. See Web, Monitor, Performance, Rx Ethernet Throughput. | ||||
| SlocResetStats | 1.3.6.1.4.1.25651.1.2.4.3.1.1000 | DisplayString | RW | |
scalar · DisplayString · read-write · current Write 'reset' to locResetStats to clear the Performance statistics. | ||||
| NperfRemote | 1.3.6.1.4.1.25651.1.2.4.3.2 | |||
| SremCurrentBER | 1.3.6.1.4.1.25651.1.2.4.3.2.1 | Integer32 | RO | |
scalar · Integer32 · read-only · current The Curent Bit-Error Rate as scaled integer for far end radio. The BER multiplied by 1,000,000. If the link is operating perfectly, this should indicate zero. See Web, Monitor, Performance, Current BER
| ||||
| SremCurrentBERstr | 1.3.6.1.4.1.25651.1.2.4.3.2.2 | DisplayString | RO | |
scalar · DisplayString · read-only · current The Current Bit-Error Rate as a string. Far end radio | ||||
| SremCurrentRSL | 1.3.6.1.4.1.25651.1.2.4.3.2.3 | Integer32 | RO | |
scalar · Integer32 · read-only · current Current RSL is the measurement of the received signal level. When the RSL falls below the threshold specification, the link disconnects and will not reconnect until the RSL is above the threshold specification. See Web, Monitor, Performance, Current RSL
| ||||
| SremCurrentRSLstr | 1.3.6.1.4.1.25651.1.2.4.3.2.4 | DisplayString | RO | |
scalar · DisplayString · read-only · current The Current RSL as a string. | ||||
| SremErrorDuration | 1.3.6.1.4.1.25651.1.2.4.3.2.5 | Integer32 | RO | |
scalar · Integer32 · read-only · current The Error Duration indicates the total number of seconds that occurred where there was at least one bit error since the last time that the radio statistics counter was reset. See Web, Monitor, Performance, Errored Seconds, Remote column.
| ||||
| SremErrorDurationStr | 1.3.6.1.4.1.25651.1.2.4.3.2.6 | DisplayString | RO | |
scalar · DisplayString · read-only · current The Error Duration as a formatted string. Far end radio. | ||||
| SremUnavailDuration | 1.3.6.1.4.1.25651.1.2.4.3.2.7 | Integer32 | RO | |
scalar · Integer32 · read-only · current Unavailable Duration keeps track of every second where the BER equals or exceeds 1x10-3, as well as any seconds where there is a complete loss of radio communication. See Web, Monitor, Performance, Unavailable Seconds
| ||||
| SremUnavailDurationStr | 1.3.6.1.4.1.25651.1.2.4.3.2.8 | DisplayString | RO | |
scalar · DisplayString · read-only · current The Unavailable Duration as a formatted string. Far end radio. | ||||
| SremMinRSL | 1.3.6.1.4.1.25651.1.2.4.3.2.9 | Integer32 | RO | |
scalar · Integer32 · read-only · current The Minimum RSL indicates the worst (lowest) received signal level that occurred since the last counter reset. See Web, Monitor, Performance, Minimum RSL, Remote column.
| ||||
| SremMinRSLstr | 1.3.6.1.4.1.25651.1.2.4.3.2.10 | DisplayString | RO | |
scalar · DisplayString · read-only · current The Minimum RSL value as a string. Far end radio. | ||||
| SremMinRSLtimestamp | 1.3.6.1.4.1.25651.1.2.4.3.2.11 | DisplayString | RO | |
scalar · DisplayString · read-only · current The Minimum RSL Timestamp indicates the date and time when the Minimum RSL occurred. See Web, Monitor, Performance, Minimum RSL Timestamp, Remote column. | ||||
| SremMaxRSL | 1.3.6.1.4.1.25651.1.2.4.3.2.12 | Integer32 | RO | |
scalar · Integer32 · read-only · current The Maximum RSL indicates the best (highest) RSL that occurred since the last counter reset. See Web, Monitor, Performance, Maximum RSL, Remote column.
| ||||
| SremMaxRSLstr | 1.3.6.1.4.1.25651.1.2.4.3.2.13 | DisplayString | RO | |
scalar · DisplayString · read-only · current The Maximum RSL level As string. Far end radio.
| ||||
| SremSampleDuration | 1.3.6.1.4.1.25651.1.2.4.3.2.14 | Integer32 | RO | |
scalar · Integer32 · read-only · current The Sample Duration indicates the amount of time passed since the last counter reset. See Web, Monitor, Performance, Time Since Reset, Remote column.
| ||||
| SremSampleDurationStr | 1.3.6.1.4.1.25651.1.2.4.3.2.15 | DisplayString | RO | |
scalar · DisplayString · read-only · current The Sample Duration value as a formatted string. Far end radio. | ||||
| SremResetStats | 1.3.6.1.4.1.25651.1.2.4.3.2.1000 | DisplayString | RW | |
scalar · DisplayString · read-write · current Write 'reset' to remResetStats to clear the Performance statistics. | ||||
| NuserThroughput | 1.3.6.1.4.1.25651.1.2.4.5 | |||
| SaggregateUserThroughput | 1.3.6.1.4.1.25651.1.2.4.5.1 | DisplayString | RO | |
scalar · DisplayString · read-only · current Aggregated User Throughput. For FDD radios this parameter is always equal to fullDuplexEthernetThroughput.
| ||||
| SinboundEthernetThroughput | 1.3.6.1.4.1.25651.1.2.4.5.2 | DisplayString | RO | |
scalar · DisplayString · read-only · current Inbound Ethernet Throughput. For FDD radios this parameter is always N/A.
| ||||
| SoutboundEthernetThroughput | 1.3.6.1.4.1.25651.1.2.4.5.3 | DisplayString | RO | |
scalar · DisplayString · read-only · current Outbound Ethernet Throughput. For FDD radios this parameter is always N/A.
| ||||
| SfullDuplexEthernetThroughput | 1.3.6.1.4.1.25651.1.2.4.5.4 | DisplayString | RO | |
scalar · DisplayString · read-only · current The Full Duplex Ethernet Throughput is determined by the combination of settings for Mode and Bandwidth. See Web, Monitor, User Throughput, Full Duplex Ethernet Throughput.
| ||||
| SradioReboot | 1.3.6.1.4.1.25651.1.2.1000 | DisplayString (SIZE (0..100)) | RW | |
scalar · DisplayString (SIZE (0..100)) · read-write · current Reboot the radio device. Send 'reboot' to radioReboot parameter to reboot the radio device. | ||||
| NproductsMIBConformance | 1.3.6.1.4.1.25651.1.3 | |||
| NproductsMIBCompliances | 1.3.6.1.4.1.25651.1.3.1 | |||
| NproductsMIBGroups | 1.3.6.1.4.1.25651.1.3.2 | |||
| GproductsAllObjects | 1.3.6.1.4.1.25651.1.3.2.1 | |||
group · current This automatically created object group contains all those objects that do not belong to any other OBJECT-GROUP
| ||||
Textual conventions
PwTypeOCTET STRING (SIZE (8..16))Display hint:
255aThis is a PW field.