ETHERNET-MIB
Exalt Communicationssnmptranslate -m ETHERNET-MIB -Tpsnmpwalk -v2c -c <community> -m ETHERNET-MIB <host> 1.3.6.1.4.1.25651.1.2.3.2.1Imports
| ExaltComProducts | interface, locEthAlarms, remEthAlarms |
|---|---|
| ExaltComm | AlarmLevelT, EnableStatusT, EthernetMgmtTypeT |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | Bits, Gauge32, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso |
| SNMPv2-TC | DisplayString, PhysAddress, TEXTUAL-CONVENTION |
OID tree
| Name | OID | Type | Access | Status |
|---|---|---|---|---|
| Nethernet | 1.3.6.1.4.1.25651.1.2.3.2.1 | |||
node · current Ethernet interfaces. | ||||
| SethernetNumChannels | 1.3.6.1.4.1.25651.1.2.3.2.1.3 | Gauge32 | RO | |
scalar · Gauge32 · read-only · current The maximum number of available ethernet channels.
| ||||
| TethernetInterfaces | 1.3.6.1.4.1.25651.1.2.3.2.1.4 | NA | ||
table · not-accessible · current Attributes for ethernet ports. | ||||
| RethernetInterface | 1.3.6.1.4.1.25651.1.2.3.2.1.4.1 | NA | ||
| Cfunction | 1.3.6.1.4.1.25651.1.2.3.2.1.4.1.1 | EthernetFunctionT | RW | |
column · EthernetFunctionT · read-write · current Ethernet port function. | ||||
| Cmode | 1.3.6.1.4.1.25651.1.2.3.2.1.4.1.2 | EthernetModeT | RW | |
column · EthernetModeT · read-write · current Ethernet mode . | ||||
| Calarm | 1.3.6.1.4.1.25651.1.2.3.2.1.4.1.3 | EnableStatusT | RW | |
column · EnableStatusT · read-write · current Ethernet port alarm. | ||||
| Cmute | 1.3.6.1.4.1.25651.1.2.3.2.1.4.1.4 | EnableStatusT | RW | |
column · EnableStatusT · read-write · current Ethernet can be muted, when there is a system/ethernet alarm. When MHS is enabled, the ethernet mute is termed as 'Auto', setting a value as 2, when MHS disabled, the value is restored | ||||
| CrateConfig | 1.3.6.1.4.1.25651.1.2.3.2.1.4.1.5 | EnableStatusT | RW | |
column · EnableStatusT · read-write · current Ethernet rate limit status, default is disabled | ||||
| CrateType | 1.3.6.1.4.1.25651.1.2.3.2.1.4.1.6 | EthRateLimitTypeT | RW | |
column · EthRateLimitTypeT · read-write · current Ethernet rate limit type, default is KBPS | ||||
| CrateLimit | 1.3.6.1.4.1.25651.1.2.3.2.1.4.1.7 | EthRateLimitValueT | RW | |
column · EthRateLimitValueT · read-write · current Ethernet rate limit type default is 64KBPS | ||||
| Cdhcp | 1.3.6.1.4.1.25651.1.2.3.2.1.4.1.8 | EnableStatusT | RW | |
column · EnableStatusT · read-write · current DHCP (Enable/Disable) on port. | ||||
| SethernetLearning | 1.3.6.1.4.1.25651.1.2.3.2.1.5 | EnableStatusT | RW | |
scalar · EnableStatusT · read-write · current Etherner Learning (Enable/Disable) on the switch | ||||
| SethernetMgmt | 1.3.6.1.4.1.25651.1.2.3.2.1.6 | EthernetMgmtTypeT | RW | |
scalar · EthernetMgmtTypeT · read-write · current Etherner Management Type (Inband/Out-of-Band/Port-to-Port/Legacy) for the switch | ||||
| SethernetFlowControl | 1.3.6.1.4.1.25651.1.2.3.2.1.7 | EnableStatusT | RW | |
scalar · EnableStatusT · read-write · current Etherner Flow Control (Disable/Enable) on the switch | ||||
| ScommitEthernetSettings | 1.3.6.1.4.1.25651.1.2.3.2.1.1000 | DisplayString (SIZE (4..200)) | RW | |
scalar · DisplayString (SIZE (4..200)) · read-write · current The Commit ethernet command. | ||||
| TlocETHAlarms | 1.3.6.1.4.1.25651.1.2.4.2.3.2.1 | NA | ||
table · not-accessible · current The Local Ethernet Interface Alarms. | ||||
| RlocEthAlarmsEntry | 1.3.6.1.4.1.25651.1.2.4.2.3.2.1.1 | NA | ||
| ClocEthAlarm | 1.3.6.1.4.1.25651.1.2.4.2.3.2.1.1.1 | AlarmLevelT | RO | |
column · AlarmLevelT · read-only · current The Alarms state for the Local Ethernet Channel. | ||||
| TremETHAlarms | 1.3.6.1.4.1.25651.1.2.4.2.4.2.1 | NA | ||
table · not-accessible · current The Local Ethernet Interface Alarms. | ||||
| RremEthAlarmsEntry | 1.3.6.1.4.1.25651.1.2.4.2.4.2.1.1 | NA | ||
| CremEthAlarm | 1.3.6.1.4.1.25651.1.2.4.2.4.2.1.1.1 | AlarmLevelT | RO | |
column · AlarmLevelT · read-only · current The Alarms state for the Remote Ethernet Channel. | ||||
Textual conventions
EthRateLimitTypeTINTEGERkbps(0)mbps(1)The ethernet rate limit type in KBPS (or) MBPS.
EthRateLimitValueTInteger32The ethernet rate limit, if the rate limit is enabled, the value is applied on to the port. eg., rate in KBPS (64..1792, stepsize 64) rate in MBPS (2..100, stepsize 1) and (104..1000, stepsize 8)EthernetFunctionTINTEGERmgmt(1)traffic(0)trafficmgmt(2)The ethernet port function status
EthernetModeTINTEGERauto(6)full10(4)full100(2)full1000(0)half10(5)half100(3)half1000(1)The Ethernet port operation modes