HIPATH-WIRELESS-HWC-MIB
Siemens AGThe access controller MIB
snmptranslate -m HIPATH-WIRELESS-HWC-MIB -Tpsnmpwalk -v2c -c <community> -m HIPATH-WIRELESS-HWC-MIB <host> 1.3.6.1.4.1.4329.15.5.2Imports
| HIPATH-WIRELESS-SMI | hiPathWirelessMgmt, hiPathWirelessModules |
|---|---|
| IEEE802dot11-MIB | WEPKeytype |
| IF-MIB | InterfaceIndex, ifIndex |
| IPV6-TC | Ipv6Address |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | Bits, Counter32, Counter64, Gauge32, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso |
| SNMPv2-TC | DisplayString, MacAddress, PhysAddress, RowStatus, TEXTUAL-CONVENTION, TruthValue |
OID tree
| Name | OID | Type | Access | Status | Example | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| NhiPathWirelessController | 1.3.6.1.4.1.4329.15.3.2 | ||||||||||||
| NsystemObjects | 1.3.6.1.4.1.4329.15.3.2.1 | ||||||||||||
| SsysSoftwareVersion | 1.3.6.1.4.1.4329.15.3.2.1.1 | DisplayString | RO | ||||||||||
scalar · DisplayString · read-only · current System software version. | |||||||||||||
| SsysLogLevel | 1.3.6.1.4.1.4329.15.3.2.1.2 | LogEventSeverity | RW | ||||||||||
scalar · LogEventSeverity · read-write · current Sets the level of events which are written to the system log. | |||||||||||||
| SsysSerialNo | 1.3.6.1.4.1.4329.15.3.2.1.3 | OCTET STRING (SIZE (0..64)) | RO | ||||||||||
scalar · OCTET STRING (SIZE (0..64)) · read-only · current System serial number. | |||||||||||||
| NsysLogSupport | 1.3.6.1.4.1.4329.15.3.2.1.4 | ||||||||||||
| ShiPathWirelessAppLogFacility | 1.3.6.1.4.1.4329.15.3.2.1.4.1 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current The application log facility level for syslog.
| |||||||||||||
| SserviceLogFacility | 1.3.6.1.4.1.4329.15.3.2.1.4.2 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current The service log facility level for syslog.
| |||||||||||||
| SincludeAllServiceMessages | 1.3.6.1.4.1.4329.15.3.2.1.4.3 | TruthValue | RW | ||||||||||
scalar · TruthValue · read-write · current Indicates if DHCP messages should also be forwarded to syslog. | |||||||||||||
| TsysLogServersTable | 1.3.6.1.4.1.4329.15.3.2.1.4.4 | NA | |||||||||||
table · not-accessible · current Table of syslog servers to forward logging messages. | |||||||||||||
| RsysLogServersEntry | 1.3.6.1.4.1.4329.15.3.2.1.4.4.1 | NA | |||||||||||
row · not-accessible · current Configuration information for an external syslog server.
| |||||||||||||
| CsysLogServerIndex | 1.3.6.1.4.1.4329.15.3.2.1.4.4.1.1 | Integer32 (1..2147483647) | RW | ||||||||||
column · Integer32 (1..2147483647) · read-write · current Table index for the syslog server. | |||||||||||||
| CsysLogServerEnabled | 1.3.6.1.4.1.4329.15.3.2.1.4.4.1.2 | TruthValue | RW | ||||||||||
column · TruthValue · read-write · current Indicates if messages are to be sent to the syslog server. | |||||||||||||
| CsysLogServerIP | 1.3.6.1.4.1.4329.15.3.2.1.4.4.1.3 | IpAddress | RW | ||||||||||
column · IpAddress · read-write · current syslog server IP address. | |||||||||||||
| CsysLogServerPort | 1.3.6.1.4.1.4329.15.3.2.1.4.4.1.4 | Integer32 | RW | ||||||||||
column · Integer32 · read-write · current syslog server port number. | |||||||||||||
| CsysLogServerRowStatus | 1.3.6.1.4.1.4329.15.3.2.1.4.4.1.5 | RowStatus | RW | ||||||||||
column · RowStatus · read-write · current RowStatus for operating on syslogServersTable. | |||||||||||||
| SsysCPUType | 1.3.6.1.4.1.4329.15.3.2.1.5 | DisplayString | RO | ||||||||||
scalar · DisplayString · read-only · current Wireless controller's CPU type | |||||||||||||
| NapLogManagement | 1.3.6.1.4.1.4329.15.3.2.1.6 | ||||||||||||
| SapLogCollectionEnable | 1.3.6.1.4.1.4329.15.3.2.1.6.1 | TruthValue | RW | ||||||||||
scalar · TruthValue · read-write · current If this field is set to true, then the AP log collection feature is enabled. | |||||||||||||
| SapLogFrequency | 1.3.6.1.4.1.4329.15.3.2.1.6.2 | Integer32 | RW | ||||||||||
scalar · Integer32 · read-write · current Number of log collections performed daily. The number must be one of the following 1, 2, 4, 6. | |||||||||||||
| SapLogDestination | 1.3.6.1.4.1.4329.15.3.2.1.6.3 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Destination where the log file will be stored. If the local flash is not mounted, then you can not select 1. 0 : local memory. 1 : flash. 2 : remote location.
| |||||||||||||
| SapLogFTProtocol | 1.3.6.1.4.1.4329.15.3.2.1.6.4 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current File transfer protocol. This field has meaning only when apLogDestination is set to remote(2). 0 : ftp. 1 : scp.
| |||||||||||||
| SapLogServerIP | 1.3.6.1.4.1.4329.15.3.2.1.6.5 | IpAddress | RW | ||||||||||
scalar · IpAddress · read-write · current The IP address of the remote server. This field has meaning only when apLogDestination is set to remote(2). | |||||||||||||
| SapLogUserId | 1.3.6.1.4.1.4329.15.3.2.1.6.6 | DisplayString | RW | ||||||||||
scalar · DisplayString · read-write · current The user ID that is used for access to the remote server. This field has meaning only when apLogDestination is set to remote(2). | |||||||||||||
| SapLogPassword | 1.3.6.1.4.1.4329.15.3.2.1.6.7 | DisplayString | RW | ||||||||||
scalar · DisplayString · read-write · current The user password that is used for access to the remote server. This field has meaning only when apLogDestination is set to remote(2). This field can only be viewed in SNMPv3 mode with privacy. | |||||||||||||
| SapLogDirectory | 1.3.6.1.4.1.4329.15.3.2.1.6.8 | DisplayString | RW | ||||||||||
scalar · DisplayString · read-write · current The directory of the remote server. This field has meaning only when apLogDestination is set to remote(2). | |||||||||||||
| TapLogSelectedAPsTable | 1.3.6.1.4.1.4329.15.3.2.1.6.9 | NA | |||||||||||
table · not-accessible · current Table containing a list of APs for which log collection is supported. | |||||||||||||
| RapLogSelectedAPsEntry | 1.3.6.1.4.1.4329.15.3.2.1.6.9.1 | NA | |||||||||||
row · not-accessible · current Configuration information of an AP which supports the AP log feature.
| |||||||||||||
| CapSerialNo | 1.3.6.1.4.1.4329.15.3.2.1.6.9.1.1 | OCTET STRING (SIZE (16)) | NA | ||||||||||
column · OCTET STRING (SIZE (16)) · not-accessible · current Table index for the apLogSelectedAPs. The AP's serial number serves as the index. | |||||||||||||
| Cselect | 1.3.6.1.4.1.4329.15.3.2.1.6.9.1.2 | TruthValue | RW | ||||||||||
column · TruthValue · read-write · current Indicates whether logs are collected from the AP. | |||||||||||||
| SapLogQuickSelectedOption | 1.3.6.1.4.1.4329.15.3.2.1.6.10 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current This is a quick select option for the user to perform the AP's bulk selection. This field is write-only and read access returns unknown(0) value. 0 : unknown. 1 : add all APs. 2 : add all local APs. 3 : add all foreign APs. 4 : remove all APs. 5 : remove all local APs. 6 : remove all foreign APs.
| |||||||||||||
| NapLogFileUtility | 1.3.6.1.4.1.4329.15.3.2.1.7 | ||||||||||||
| SapLogFileUtilityLimit | 1.3.6.1.4.1.4329.15.3.2.1.7.1 | Unsigned32 (0..4294967295) | RO | ||||||||||
scalar · Unsigned32 (0..4294967295) · read-only · current The maximum number of AP log file copy requests that can be held in the apLogFileCopyTable. A value of 0 indicates no configured limit. | |||||||||||||
| SapLogFileUtilityCurrent | 1.3.6.1.4.1.4329.15.3.2.1.7.2 | Gauge32 | RO | ||||||||||
scalar · Gauge32 · read-only · current The number of AP log file copy requests currently in the apLogFileCopyTable. | |||||||||||||
| TapLogFileCopyTable | 1.3.6.1.4.1.4329.15.3.2.1.7.5 | NA | |||||||||||
table · not-accessible · current List of AP log file copy requests. | |||||||||||||
| RapLogFileCopyEntry | 1.3.6.1.4.1.4329.15.3.2.1.7.5.1 | NA | |||||||||||
row · not-accessible · current An entry describing the AP log file copy request.
| |||||||||||||
| CapLogFileCopyIndex | 1.3.6.1.4.1.4329.15.3.2.1.7.5.1.1 | Unsigned32 (1..4294967295) | NA | ||||||||||
column · Unsigned32 (1..4294967295) · not-accessible · current The index for this AP log file copy request. | |||||||||||||
| CapLogFileCopyDestination | 1.3.6.1.4.1.4329.15.3.2.1.7.5.1.2 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Destination where the log file will be copied. If the local flash is not mounted, then you can not select 1. 1 : copy the local AP log file to flash. 2 : copy the local AP log file to remote server.
| |||||||||||||
| CapLogFileCopyProtocol | 1.3.6.1.4.1.4329.15.3.2.1.7.5.1.3 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current File transfer protocol to be used to copy the log file. 0 : ftp. 1 : scp.
| |||||||||||||
| CapLogFileCopyServerIP | 1.3.6.1.4.1.4329.15.3.2.1.7.5.1.4 | IpAddress | RW | ||||||||||
column · IpAddress · read-write · current The IP address of the remote server. | |||||||||||||
| CapLogFileCopyUserID | 1.3.6.1.4.1.4329.15.3.2.1.7.5.1.5 | DisplayString | RW | ||||||||||
column · DisplayString · read-write · current The user ID that is used for access to the remote server. | |||||||||||||
| CapLogFileCopyPassword | 1.3.6.1.4.1.4329.15.3.2.1.7.5.1.6 | DisplayString | RW | ||||||||||
column · DisplayString · read-write · current The user password that is used for access to the remote server. This field can only be viewed in SNMPv3 mode with privacy. | |||||||||||||
| CapLogFileCopyServerDirectory | 1.3.6.1.4.1.4329.15.3.2.1.7.5.1.7 | DisplayString | RW | ||||||||||
column · DisplayString · read-write · current The directory on the remote server. | |||||||||||||
| CapLogFileCopyOperation | 1.3.6.1.4.1.4329.15.3.2.1.7.5.1.8 | INTEGER | RC | ||||||||||
column · INTEGER · read-create · current If this field is set to 1, then the controller will start to perform the copy action.
| |||||||||||||
| CapLogFileCopyOperationStatus | 1.3.6.1.4.1.4329.15.3.2.1.7.5.1.9 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current The operational state of the AP log file copy request. inactive - Indicates that the RowStatus of this conceptual row is not in the `active` state. pending - Indicates that the AP log file copy described by this row is ready to run and waiting in a queue. running - Indicates that the AP log file copy described by this row is running. success - Indicates that the AP log file copy described by this row has successfully run to completion. failure - Indicates that the AP log file copy described by this row has failed to run to completion.
| |||||||||||||
| CapLogFileCopyRowStatus | 1.3.6.1.4.1.4329.15.3.2.1.7.5.1.10 | RowStatus | RC | ||||||||||
column · RowStatus · read-create · current Row status variable for row operations on the apLogFileCopyTable. | |||||||||||||
| NdnsObjects | 1.3.6.1.4.1.4329.15.3.2.2 | ||||||||||||
| SprimaryDNS | 1.3.6.1.4.1.4329.15.3.2.2.1 | IpAddress | RW | ||||||||||
scalar · IpAddress · read-write · current Primary DNS address configured in the Controller. | |||||||||||||
| SsecondaryDNS | 1.3.6.1.4.1.4329.15.3.2.2.2 | IpAddress | RW | ||||||||||
scalar · IpAddress · read-write · current Secondary DNS address configured in the Controller. | |||||||||||||
| StertiaryDNS | 1.3.6.1.4.1.4329.15.3.2.2.3 | IpAddress | RW | ||||||||||
scalar · IpAddress · read-write · current Third DNS address configured in the Controller. | |||||||||||||
| NmgmtPortObjects | 1.3.6.1.4.1.4329.15.3.2.3 | ||||||||||||
| SmgmtPortIfIndex | 1.3.6.1.4.1.4329.15.3.2.3.1 | Integer32 | RO | ||||||||||
scalar · Integer32 · read-only · current ifIndex of the management port. | |||||||||||||
| SmgmtPortHostname | 1.3.6.1.4.1.4329.15.3.2.3.2 | DisplayString | RW | ||||||||||
scalar · DisplayString · read-write · current Hostname of the management port. | |||||||||||||
| SmgmtPortDomain | 1.3.6.1.4.1.4329.15.3.2.3.5 | DisplayString | RW | ||||||||||
scalar · DisplayString · read-write · current Domain of the management port. | |||||||||||||
| NphysicalPortObjects | 1.3.6.1.4.1.4329.15.3.2.4 | ||||||||||||
| SphysicalPortCount | 1.3.6.1.4.1.4329.15.3.2.4.1 | Integer32 | RO | ||||||||||
scalar · Integer32 · read-only · current Number of rows in routerPortsTable. | |||||||||||||
| TphysicalPortsTable | 1.3.6.1.4.1.4329.15.3.2.4.2 | NA | deprecated | ||||||||||
table · not-accessible · deprecated Table of router ports on the controller. | |||||||||||||
| RphysicalPortsEntry | 1.3.6.1.4.1.4329.15.3.2.4.2.1 | NA | deprecated | ||||||||||
| CportMgmtTrafficEnable | 1.3.6.1.4.1.4329.15.3.2.4.2.1.1 | TruthValue | RW | deprecated | |||||||||
column · TruthValue · read-write · deprecated Determines whether controller management network traffic is allowed over this interface. | |||||||||||||
| CportDuplexMode | 1.3.6.1.4.1.4329.15.3.2.4.2.1.2 | INTEGER | RW | deprecated | |||||||||
column · INTEGER · read-write · deprecated Duplex mode for the esa ports.
| |||||||||||||
| CportFunction | 1.3.6.1.4.1.4329.15.3.2.4.2.1.3 | INTEGER | RW | deprecated | |||||||||
column · INTEGER · read-write · deprecated Specifies the behavior of the EWC physical ports.
| |||||||||||||
| CportEnabled | 1.3.6.1.4.1.4329.15.3.2.4.2.1.4 | INTEGER | RW | deprecated | |||||||||
column · INTEGER · read-write · deprecated If enabled, the interface administratively is enabled.
| |||||||||||||
| CportName | 1.3.6.1.4.1.4329.15.3.2.4.2.1.5 | OCTET STRING | RO | deprecated | |||||||||
column · OCTET STRING · read-only · deprecated A textual string containing information about the port. | |||||||||||||
| CportIpAddress | 1.3.6.1.4.1.4329.15.3.2.4.2.1.6 | IpAddress | RW | deprecated | |||||||||
column · IpAddress · read-write · deprecated The IP address of this port. | |||||||||||||
| CportMask | 1.3.6.1.4.1.4329.15.3.2.4.2.1.7 | IpAddress | RW | deprecated | |||||||||
column · IpAddress · read-write · deprecated The subnet mask associated with the IP address of this port. | |||||||||||||
| CportMacAddress | 1.3.6.1.4.1.4329.15.3.2.4.2.1.8 | MacAddress | RO | deprecated | |||||||||
column · MacAddress · read-only · deprecated Port's MAC address. | |||||||||||||
| CportVlanID | 1.3.6.1.4.1.4329.15.3.2.4.2.1.9 | Integer32 (-1..4094) | RW | deprecated | |||||||||
column · Integer32 (-1..4094) · read-write · deprecated External VLAN tag for the physical port for trasmitted and received packets. Value ranges: (-1) it is not tagged, zero(0) means reserved, 1-4094 tag value. | |||||||||||||
| CportDHCPEnable | 1.3.6.1.4.1.4329.15.3.2.4.2.1.10 | TruthValue | RW | deprecated | |||||||||
column · TruthValue · read-write · deprecated If enabled, the controller is configured as default DHCP server for AP. | |||||||||||||
| CportDHCPGateway | 1.3.6.1.4.1.4329.15.3.2.4.2.1.11 | DisplayString | RW | deprecated | |||||||||
column · DisplayString · read-write · deprecated Gateway address to be supplied to the wireless clients if controller is configured as default DHCP server for AP. | |||||||||||||
| CportDHCPDomain | 1.3.6.1.4.1.4329.15.3.2.4.2.1.12 | DisplayString | RW | deprecated | |||||||||
column · DisplayString · read-write · deprecated Domain name to be supplied to the wireless clients if controller is configured as default DHCP server for AP. | |||||||||||||
| CportDHCPDefaultLease | 1.3.6.1.4.1.4329.15.3.2.4.2.1.13 | Integer32 | RW | deprecated | |||||||||
column · Integer32 · read-write · deprecated Default DHCP lease time in seconds to be supplied to the wireless clients if controller is configured as default DHCP server for AP. | |||||||||||||
| CportDHCPMaxLease | 1.3.6.1.4.1.4329.15.3.2.4.2.1.14 | Integer32 | RW | deprecated | |||||||||
column · Integer32 · read-write · deprecated Maximum DHCP lease time in seconds to be supplied to the wireless clients if controller is configured as default DHCP server for AP. | |||||||||||||
| CportDHCPDnsServers | 1.3.6.1.4.1.4329.15.3.2.4.2.1.15 | DisplayString | RW | deprecated | |||||||||
column · DisplayString · read-write · deprecated List of DNSs to be supplied to the wireless clients if controller is configured as default DHCP server for AP. | |||||||||||||
| CportDHCPWins | 1.3.6.1.4.1.4329.15.3.2.4.2.1.16 | DisplayString | RW | deprecated | |||||||||
column · DisplayString · read-write · deprecated List of WINSs to be supplied to the wireless clients if controller is configured as default DHCP server for AP. | |||||||||||||
| SphysicalPortsInternalVlanID | 1.3.6.1.4.1.4329.15.3.2.4.3 | Integer32 (-1..4094) | RW | ||||||||||
scalar · Integer32 (-1..4094) · read-write · current Internal VLAN tag to be used for physical ports for which the exernal VLAN tag have not been configured. Value ranges: (-1) it is not tagged, zero(0) means reserved, 1-4094 tag value. | |||||||||||||
| SphysicalFlash | 1.3.6.1.4.1.4329.15.3.2.4.4 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Flash drive status.
| |||||||||||||
| TphyDHCPRangeTable | 1.3.6.1.4.1.4329.15.3.2.4.5 | NA | deprecated | ||||||||||
table · not-accessible · deprecated phyDHCPRangeTable contains the IP address ranges that DHCP will serve to clients associated with physical ports. | |||||||||||||
| RphyDHCPRangeEntry | 1.3.6.1.4.1.4329.15.3.2.4.5.1 | NA | deprecated | ||||||||||
row · not-accessible · deprecated Configuration information for a DHCP range.
| |||||||||||||
| CphyDHCPRangeIndex | 1.3.6.1.4.1.4329.15.3.2.4.5.1.1 | Integer32 (1..2147483647) | RW | deprecated | |||||||||
column · Integer32 (1..2147483647) · read-write · deprecated Index for the DHCP row element. | |||||||||||||
| CphyDHCPRangeStart | 1.3.6.1.4.1.4329.15.3.2.4.5.1.2 | IpAddress | RW | deprecated | |||||||||
column · IpAddress · read-write · deprecated First IP address in the range. | |||||||||||||
| CphyDHCPRangeEnd | 1.3.6.1.4.1.4329.15.3.2.4.5.1.3 | IpAddress | RW | deprecated | |||||||||
column · IpAddress · read-write · deprecated Last IP address in the range. | |||||||||||||
| CphyDHCPRangeType | 1.3.6.1.4.1.4329.15.3.2.4.5.1.4 | INTEGER | RW | deprecated | |||||||||
column · INTEGER · read-write · deprecated Determines whether addresses in the specified range will be included, or excluded by the DHCP server.
| |||||||||||||
| CphyDHCPRangeStatus | 1.3.6.1.4.1.4329.15.3.2.4.5.1.5 | RowStatus | RW | deprecated | |||||||||
column · RowStatus · read-write · deprecated Row status variable for row operations on the phyDHCPRangeTable | |||||||||||||
| TlayerTwoPortTable | 1.3.6.1.4.1.4329.15.3.2.4.6 | NA | |||||||||||
table · not-accessible · current This table contains all layer two ports. | |||||||||||||
| RlayerTwoPortEntry | 1.3.6.1.4.1.4329.15.3.2.4.6.1 | NA | |||||||||||
| ClayerTwoPortName | 1.3.6.1.4.1.4329.15.3.2.4.6.1.1 | DisplayString (SIZE (1..32)) | RO | ||||||||||
column · DisplayString (SIZE (1..32)) · read-only · current Text string identifying the port within the controller. | |||||||||||||
| ClayerTwoPortMgmtState | 1.3.6.1.4.1.4329.15.3.2.4.6.1.2 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current This value indicates administrator state of the port.
| |||||||||||||
| ClayerTwoPortMacAddress | 1.3.6.1.4.1.4329.15.3.2.4.6.1.3 | MacAddress | RO | ||||||||||
column · MacAddress · read-only · current Port's MAC address. | |||||||||||||
| SjumboFrames | 1.3.6.1.4.1.4329.15.3.2.4.7 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Enables support for frames up to 1800 bytes long. jumboFrames support only applies to the controller and compatible APs.
| |||||||||||||
| NvnManagerObjects | 1.3.6.1.4.1.4329.15.3.2.5 | ||||||||||||
| SvnRole | 1.3.6.1.4.1.4329.15.3.2.5.1 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Specifies the role of this EWC in inter-EWC mobility. None indicates that mobile units cannot roam to or from this EWC. In any EWC cluster, only one EWC should be specified as vnMgr, all others should be have vnRole = vnAgent.
| |||||||||||||
| SvnIfIndex | 1.3.6.1.4.1.4329.15.3.2.5.2 | Integer32 | RW | ||||||||||
scalar · Integer32 · read-write · current ifIndex of the physical port where inter-EWC tunnels terminate. This field has meaning if vnRole is not none(1) | |||||||||||||
| SvnHeartbeatInterval | 1.3.6.1.4.1.4329.15.3.2.5.3 | Integer32 | RW | ||||||||||
scalar · Integer32 · read-write · current The time interval between inter-EWC polling messages. This field has meaning if vnRole is not none(1) | |||||||||||||
| SvnLocalClients | 1.3.6.1.4.1.4329.15.3.2.5.4 | Counter32 | RO | ||||||||||
scalar · Counter32 · read-only · current Number of locally associated clients to this controller that is considered to be their home controller in the mobility zone, which this controller is part of. | |||||||||||||
| SvnForeignClients | 1.3.6.1.4.1.4329.15.3.2.5.5 | Counter32 | RO | ||||||||||
scalar · Counter32 · read-only · current Number of clients that have registered with another controller in the mobility zone, which this controller is part of, and currently have roamed to this controller. | |||||||||||||
| SvnTotalClients | 1.3.6.1.4.1.4329.15.3.2.5.6 | Counter32 | RO | ||||||||||
scalar · Counter32 · read-only · current Number of local and foreign clients on this controller in the Mobility zone. | |||||||||||||
| NntpObjects | 1.3.6.1.4.1.4329.15.3.2.6 | ||||||||||||
| SntpEnabled | 1.3.6.1.4.1.4329.15.3.2.6.1 | TruthValue | RW | ||||||||||
scalar · TruthValue · read-write · current Enable or disables support for the Network Time Protocol (NTP). | |||||||||||||
| SntpTimezone | 1.3.6.1.4.1.4329.15.3.2.6.2 | DisplayString | RW | ||||||||||
scalar · DisplayString · read-write · current Specifies the time zone where this EWC resides. | |||||||||||||
| SntpTimeServer1 | 1.3.6.1.4.1.4329.15.3.2.6.3 | DisplayString | RW | ||||||||||
scalar · DisplayString · read-write · current Primary NTP server. | |||||||||||||
| SntpTimeServer2 | 1.3.6.1.4.1.4329.15.3.2.6.4 | DisplayString | RW | ||||||||||
scalar · DisplayString · read-write · current Secondary NTP server. | |||||||||||||
| SntpTimeServer3 | 1.3.6.1.4.1.4329.15.3.2.6.5 | DisplayString | RW | ||||||||||
scalar · DisplayString · read-write · current Tertiary NTP server. | |||||||||||||
| SntpServerEnabled | 1.3.6.1.4.1.4329.15.3.2.6.6 | TruthValue | RW | ||||||||||
scalar · TruthValue · read-write · current Enable or disables support for controller as NTP server. | |||||||||||||
| NcontrollerStats | 1.3.6.1.4.1.4329.15.3.2.7 | ||||||||||||
| StunnelsTxRxBytes | 1.3.6.1.4.1.4329.15.3.2.7.1 | Counter64 | RO | ||||||||||
scalar · Counter64 · read-only · current Sum of transmitted and received bytes over all existing tunnels. | |||||||||||||
| StunnelCount | 1.3.6.1.4.1.4329.15.3.2.7.6 | Integer32 | RO | ||||||||||
scalar · Integer32 · read-only · current Number of connections to other WirelessController controllers. | |||||||||||||
| TtunnelStatsTable | 1.3.6.1.4.1.4329.15.3.2.7.7 | NA | |||||||||||
table · not-accessible · current tunnelStatsTable contains a list of the IP tunnels connected to this EWC for use in inter-EWC mobility. | |||||||||||||
| RtunnelStatsEntry | 1.3.6.1.4.1.4329.15.3.2.7.7.1 | NA | |||||||||||
| CtunnelStartIP | 1.3.6.1.4.1.4329.15.3.2.7.7.1.1 | IpAddress | RW | ||||||||||
column · IpAddress · read-write · current IP address for the start of the tunnel. | |||||||||||||
| CtunnelStartHWC | 1.3.6.1.4.1.4329.15.3.2.7.7.1.2 | OCTET STRING | RW | ||||||||||
column · OCTET STRING · read-write · current Name of the access controller for the start of the tunnel. | |||||||||||||
| CtunnelEndIP | 1.3.6.1.4.1.4329.15.3.2.7.7.1.3 | IpAddress | RW | ||||||||||
column · IpAddress · read-write · current IP address for the end of the tunnel. | |||||||||||||
| CtunnelEndHWC | 1.3.6.1.4.1.4329.15.3.2.7.7.1.4 | OCTET STRING | RW | ||||||||||
column · OCTET STRING · read-write · current Name of the access controller for the end of the tunnel. | |||||||||||||
| CtunnelStatus | 1.3.6.1.4.1.4329.15.3.2.7.7.1.5 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Indicates if the mobility tunnel is up or down.
| |||||||||||||
| CtunnelStatsTxBytes | 1.3.6.1.4.1.4329.15.3.2.7.7.1.6 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current Number of bytes have been transmitted from the controller at the start of the tunnel to the controller on the other end of the tunnel. | |||||||||||||
| CtunnelStatsRxBytes | 1.3.6.1.4.1.4329.15.3.2.7.7.1.7 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current Number of bytes have been received by the controller at the end of the tunnel from the controller at the start of the tunnel. | |||||||||||||
| CtunnelStatsTxRxBytes | 1.3.6.1.4.1.4329.15.3.2.7.7.1.8 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current Sum of transmitted and received bytes over this tunnel. | |||||||||||||
| SclearAccessRejectMsg | 1.3.6.1.4.1.4329.15.3.2.7.8 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Set this OID to one to erase the contents of the accessRejectMessage table. The OID always returns 0 when read.
| |||||||||||||
| TaccessRejectMsgTable | 1.3.6.1.4.1.4329.15.3.2.7.9 | NA | |||||||||||
table · not-accessible · current This table lists each of the reply messages returned in RADIUS Access-Reject messages and for each reply message, a count of the number of times it has been received. | |||||||||||||
| RaccessRejectMsgEntry | 1.3.6.1.4.1.4329.15.3.2.7.9.1 | NA | |||||||||||
row · not-accessible · current One entry consisting of a unique Access-Reject Reply-Message (accessRejectReplyMessage) and count of this message.
| |||||||||||||
| CarmIndex | 1.3.6.1.4.1.4329.15.3.2.7.9.1.1 | Integer32 (1..100) | NA | ||||||||||
column · Integer32 (1..100) · not-accessible · current A number uniquely identifying each conceptual row in the accessRejectMsgTable. | |||||||||||||
| CarmCount | 1.3.6.1.4.1.4329.15.3.2.7.9.1.2 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current Count of the number of times the controller has received an Access-Reject response from a RADIUS server that contained the associated armReplyMessage. | |||||||||||||
| CarmReplyMessage | 1.3.6.1.4.1.4329.15.3.2.7.9.1.3 | DisplayString | RO | ||||||||||
column · DisplayString · read-only · current A reply message attribute received by the controller from a RADIUS server in an Access-Reject message. | |||||||||||||
| Navailability | 1.3.6.1.4.1.4329.15.3.2.8 | ||||||||||||
| SavailabilityStatus | 1.3.6.1.4.1.4329.15.3.2.8.1 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current This field can be used to enable or disable availability. If it is set to paired(1), then availability is enabled on this controller, otherwise it is considered that the controller operates in stand-alone mode. All other availability fields have no meaning if this field is set to standalone(0).
| |||||||||||||
| SpairIPAddress | 1.3.6.1.4.1.4329.15.3.2.8.2 | IpAddress | RW | ||||||||||
scalar · IpAddress · read-write · current IP address of paired controller in availability pairing mode. | |||||||||||||
| ShwcAvailabilityRank | 1.3.6.1.4.1.4329.15.3.2.8.3 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Rank of controller in Availability pairing mode. This is legacy field and applies to releases before 5.x and in current releases it is used for reporting only.
| |||||||||||||
| SfastFailover | 1.3.6.1.4.1.4329.15.3.2.8.4 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Enables or disables fast failover when controller operates in Availability pairing mode.
| |||||||||||||
| SdetectLinkFailure | 1.3.6.1.4.1.4329.15.3.2.8.5 | Unsigned32 (2..30) | RW | ||||||||||
scalar · Unsigned32 (2..30) · read-write · current Time to detect link failure between two controllers in availability pairing. The value can be set to values between 2-30 seconds
| |||||||||||||
| SsynchronizeSystemConfig | 1.3.6.1.4.1.4329.15.3.2.8.6 | TruthValue | RW | ||||||||||
scalar · TruthValue · read-write · current If this flag is set to enabled then system configuration is synchronized between paired controllers operating in Availabilty pairing mode. | |||||||||||||
| SsynchronizeGuestPort | 1.3.6.1.4.1.4329.15.3.2.8.7 | TruthValue | RW | ||||||||||
scalar · TruthValue · read-write · current If this flag is set to enabled then Guest Portal user accounts are synchronized between paired controllers operating in Availabilty pairing mode. | |||||||||||||
| NsecureConnection | 1.3.6.1.4.1.4329.15.3.2.9 | ||||||||||||
| SweakCipherEnable | 1.3.6.1.4.1.4329.15.3.2.9.1 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current By default usage of weak cipher is enabled on EWC. Weak cipher can be disabled using this field.
| |||||||||||||
| Ndashboard | 1.3.6.1.4.1.4329.15.3.2.10 | ||||||||||||
| NlicensingInformation | 1.3.6.1.4.1.4329.15.3.2.10.1 | ||||||||||||
| SlicenseRegulatoryDomain | 1.3.6.1.4.1.4329.15.3.2.10.1.1 | DisplayString | RO | ||||||||||
scalar · DisplayString · read-only · current Regulatory domain that this wireless controller system has been licensed for to operate. | |||||||||||||
| SlicenseType | 1.3.6.1.4.1.4329.15.3.2.10.1.2 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Type of license for the controller. Temporary lincese allows controller to operate within defined number of days after which a permanent license is required for the operation of the controller system.
| |||||||||||||
| SlicenseDaysRemaining | 1.3.6.1.4.1.4329.15.3.2.10.1.3 | Unsigned32 | RO | ||||||||||
scalar · Unsigned32 · read-only · current Number of days is left for the temporary license to expire. This value has meaning if the license type is temporary(1). | |||||||||||||
| SlicenseAvailableAP | 1.3.6.1.4.1.4329.15.3.2.10.1.4 | Unsigned32 | RO | ||||||||||
scalar · Unsigned32 · read-only · current If licenseMode is standAlone, this is the maximum number of APs that can be active on the controller without violating the licensing agreement. If licenseMode is availabilityPaired, this is the maximum number of APs that can be active on both members of the availability pair without violating the licensing agreement. | |||||||||||||
| SlicenseInServiceRadarAP | 1.3.6.1.4.1.4329.15.3.2.10.1.5 | Unsigned32 | RO | ||||||||||
scalar · Unsigned32 · read-only · current If licenseMode is standalone this is the maximum number of APs that can be active on this controller and can operate as Guardians or in-service Radar APs without violating the licensing agreement. If licenseMode is availabilityPaired, this is the maximum number of APs that can be active on both members of the availability pair and can operate as Guardians or in-service Radar APs without violating the licensing agreement. | |||||||||||||
| SlicenseMode | 1.3.6.1.4.1.4329.15.3.2.10.1.6 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current License mode determines how to interpret the license capacity OIDs. licenseMode is standalone if the controller is not part of an availability pair. licenseMode is availabilityPaired if the controller is part of an availability pair.
| |||||||||||||
| SlicenseLocalAP | 1.3.6.1.4.1.4329.15.3.2.10.1.7 | Unsigned32 | RO | 168 | |||||||||
scalar · Unsigned32 · read-only · current The total number of AP capacity licenses installed on this controller. Example values from LibreNMS test devices
| |||||||||||||
| SlicenseForeignAP | 1.3.6.1.4.1.4329.15.3.2.10.1.8 | Unsigned32 | RO | 24 | |||||||||
scalar · Unsigned32 · read-only · current The total number of AP capacity licenses installed on this controller's availability partner. Example values from LibreNMS test devices
| |||||||||||||
| SlicenseLocalRadarAP | 1.3.6.1.4.1.4329.15.3.2.10.1.9 | Unsigned32 | RO | ||||||||||
scalar · Unsigned32 · read-only · current The total number of AP Radar capacity licenses installed on this controller. | |||||||||||||
| SlicenseForeignRadarAP | 1.3.6.1.4.1.4329.15.3.2.10.1.10 | Unsigned32 | RO | ||||||||||
scalar · Unsigned32 · read-only · current The total number of AP Radar capacity licenses installed on this controller's availability partner. | |||||||||||||
| NstationsByProtocol | 1.3.6.1.4.1.4329.15.3.2.10.2 | ||||||||||||
| SstationsByProtocolA | 1.3.6.1.4.1.4329.15.3.2.10.2.1 | Unsigned32 | RO | ||||||||||
scalar · Unsigned32 · read-only · current Number of stations using 802.11a mode to access the network. | |||||||||||||
| SstationsByProtocolB | 1.3.6.1.4.1.4329.15.3.2.10.2.2 | Unsigned32 | RO | ||||||||||
scalar · Unsigned32 · read-only · current Number of stations using 802.11b mode to access the network. | |||||||||||||
| SstationsByProtocolG | 1.3.6.1.4.1.4329.15.3.2.10.2.3 | Unsigned32 | RO | ||||||||||
scalar · Unsigned32 · read-only · current Number of stations using 802.11b mode to access the network. | |||||||||||||
| SstationsByProtocolN24 | 1.3.6.1.4.1.4329.15.3.2.10.2.4 | Unsigned32 | RO | ||||||||||
scalar · Unsigned32 · read-only · current Number of stations using 802.11n mode with frequency of 2.4Gig to access the network. | |||||||||||||
| SstationsByProtocolN5 | 1.3.6.1.4.1.4329.15.3.2.10.2.5 | Unsigned32 | RO | ||||||||||
scalar · Unsigned32 · read-only · current Number of stations using 802.11n mode with frequency of 5Gig to access the network. | |||||||||||||
| SstationsByProtocolUnavailable | 1.3.6.1.4.1.4329.15.3.2.10.2.6 | Unsigned32 | RO | ||||||||||
scalar · Unsigned32 · read-only · current The total number of stations with sessions on this controller for which the 802.11 protocol type (a, b, g, n, ac) for which the protocol could not be determined. | |||||||||||||
| SstationsByProtocolError | 1.3.6.1.4.1.4329.15.3.2.10.2.7 | Unsigned32 | RO | ||||||||||
scalar · Unsigned32 · read-only · current The total number of stations with sessions on this controller for which an AP reported an invalid (out of range) value as the station's 802.11 protocol type. | |||||||||||||
| SstationsByProtocolAC | 1.3.6.1.4.1.4329.15.3.2.10.2.8 | Unsigned32 | RO | ||||||||||
scalar · Unsigned32 · read-only · current Number of stations using 802.11ac mode to access the network. | |||||||||||||
| TapByChannelTable | 1.3.6.1.4.1.4329.15.3.2.10.3 | NA | |||||||||||
table · not-accessible · current List of aggregated access points that are operating on a specific wireless channels. | |||||||||||||
| RapByChannelEntry | 1.3.6.1.4.1.4329.15.3.2.10.3.1 | NA | |||||||||||
row · not-accessible · current An entry in this table for one wireless channel and aggregated access point on that channel.
| |||||||||||||
| CapByChannelNumber | 1.3.6.1.4.1.4329.15.3.2.10.3.1.1 | Unsigned32 | NA | ||||||||||
column · Unsigned32 · not-accessible · current The channel on which a set of access points are presently operating. If this number is 0, this means the AP is in Guardian mode or the AP's radios are turned off. | |||||||||||||
| CapByChannelAPs | 1.3.6.1.4.1.4329.15.3.2.10.3.1.2 | Unsigned32 | RO | ||||||||||
column · Unsigned32 · read-only · current Total number of the access point on the channel that this row is indexed on. | |||||||||||||
| NvirtualNetworks | 1.3.6.1.4.1.4329.15.3.3 | ||||||||||||
| NvnsConfigObjects | 1.3.6.1.4.1.4329.15.3.3.1 | ||||||||||||
| SvnsCount | 1.3.6.1.4.1.4329.15.3.3.1.1 | Integer32 | RO | ||||||||||
scalar · Integer32 · read-only · current Number of VNSes defined in vnsConfigTable. | |||||||||||||
| TvnsConfigTable | 1.3.6.1.4.1.4329.15.3.3.1.2 | NA | |||||||||||
table · not-accessible · current Contains definitions of the Virtual Network Segments defined on this WirelessController. | |||||||||||||
| RvnsConfigEntry | 1.3.6.1.4.1.4329.15.3.3.1.2.1 | NA | |||||||||||
row · not-accessible · current Configuration elements for a specific Virtual Network Segment.
| |||||||||||||
| CvnsDescription | 1.3.6.1.4.1.4329.15.3.3.1.2.1.1 | DisplayString | RW | ||||||||||
column · DisplayString · read-write · current Textual description of the VNS. | |||||||||||||
| CvnsAssignmentMode | 1.3.6.1.4.1.4329.15.3.3.1.2.1.2 | INTEGER | RW | obsolete | |||||||||
column · INTEGER · read-write · obsolete Determines the method by which mobile units are assigned an address within this VNS. If vnsAssignmentMode = ssid, any client with an SSID matching the VNS will be assigned an address from this VNS. If vnsAssignmentMode == aaa, then address assignment is not completed until after the user is authenticated.
| |||||||||||||
| CvnsMUSessionTimeout | 1.3.6.1.4.1.4329.15.3.3.1.2.1.3 | Integer32 | RW | ||||||||||
column · Integer32 · read-write · current Client session idle time out, in seconds. | |||||||||||||
| CvnsAllowMulticast | 1.3.6.1.4.1.4329.15.3.3.1.2.1.4 | TruthValue | RW | ||||||||||
column · TruthValue · read-write · current When true, allows IP multicast packets to be broadcast to the clients on this VNS. | |||||||||||||
| CvnsSSID | 1.3.6.1.4.1.4329.15.3.3.1.2.1.5 | DisplayString | RW | ||||||||||
column · DisplayString · read-write · current Service Set Identifier (i.e. Network Name) that will be configured on the AccessPoints associated with this VNS. | |||||||||||||
| CvnsDomain | 1.3.6.1.4.1.4329.15.3.3.1.2.1.6 | DisplayString | RW | ||||||||||
column · DisplayString · read-write · current Domain name to be supplied to the wireless clients if internal DHCP address assignment. | |||||||||||||
| CvnsDNSServers | 1.3.6.1.4.1.4329.15.3.3.1.2.1.7 | DisplayString | RW | ||||||||||
column · DisplayString · read-write · current List of DNSs to be supplied to the wireless clients if internal DHCP address assignment. | |||||||||||||
| CvnsWINSServers | 1.3.6.1.4.1.4329.15.3.3.1.2.1.8 | DisplayString | RW | ||||||||||
column · DisplayString · read-write · current List of WINSs to be supplied to the wireless clients if internal DHCP address assignment. | |||||||||||||
| CvnsAuthModel | 1.3.6.1.4.1.4329.15.3.3.1.2.1.9 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current vnsAuthModel specifies the authentication method used for clients in the VNS. None indicates that the VNS is open, and no authentication is required. vnsAuthModel=captivePortal may only be specified for a VNS with vnsAssignmentMode=ssid. Likewise, vnsAuthModel=dot1X may only be specified for a VNS with vnsAssignmentMode=aaa.
| |||||||||||||
| CvnsParentIfIndex | 1.3.6.1.4.1.4329.15.3.3.1.2.1.10 | Integer32 | RW | obsolete | |||||||||
column · Integer32 · read-write · obsolete Specifies the ifIndex of the parent VNS, if this VNS is a child. If this is a top level VNS, vnsParentIfIndex will return null or 0. | |||||||||||||
| CvnsMgmtTrafficEnable | 1.3.6.1.4.1.4329.15.3.3.1.2.1.11 | TruthValue | RW | ||||||||||
column · TruthValue · read-write · current Specifies whether clients in the VNS have access to EWC management elements. | |||||||||||||
| CvnsUseDHCPRelay | 1.3.6.1.4.1.4329.15.3.3.1.2.1.12 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current This variable indicates what type of DHCP is used for the VNS. none(0): No DHCP server on the VNS. dhcpRelay(1): Uses DHCP relay to reach the DHCP server. localDhcp(2): Uses local DHCP server on the controler.
| |||||||||||||
| Cvns3rdPartyAP | 1.3.6.1.4.1.4329.15.3.3.1.2.1.13 | TruthValue | RW | ||||||||||
column · TruthValue · read-write · current When true, specifies that the VNS contains 3rd party access points. Only one such VNS may be defined for a WirelessController. | |||||||||||||
| CvnsStatus | 1.3.6.1.4.1.4329.15.3.3.1.2.1.14 | RowStatus | RW | ||||||||||
column · RowStatus · read-write · current RowStatus variable for performing row operations on vnsConfigTable. | |||||||||||||
| CvnsMode | 1.3.6.1.4.1.4329.15.3.3.1.2.1.15 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Type of traffic for this VNS. routed(1): The traffic is routed at the controller. bridgeAtController(2): Traffic is bridged at controller. bridgeAtAP(3): Traffic is bridged at Access Points. wds(4): Wireless Distributed System (WDS) type of VNS. If VNS is type of wds(4), then only vnsSupressSSID, vnsDescription and vnsSSID has meaning.
| |||||||||||||
| CvnsVlanID | 1.3.6.1.4.1.4329.15.3.3.1.2.1.16 | Integer32 (-1..4094) | RW | ||||||||||
column · Integer32 (-1..4094) · read-write · current VLAN tag for the packets trasmitted to/from of the VNS. This value has meaning if vnsMode is bridgeAtController(2) or bridgeAtAP(3). If vnsMode = bridgeAtController(2), tagging is done at controller. If vnsMode = bridgeAtAP(3), tagging is done at Access Point. Value ranges: (-1) it is not tagged, zero(0) means reserved, 1-4094 tag value. | |||||||||||||
| CvnsInterfaceName | 1.3.6.1.4.1.4329.15.3.3.1.2.1.17 | OCTET STRING | RW | ||||||||||
column · OCTET STRING · read-write · current Physical interface to be used in the controller for trasmitting/receiving packets for the VNS. This value has meaning if vnsMode is bridgeAtController(2). | |||||||||||||
| CvnsMgmIpAddress | 1.3.6.1.4.1.4329.15.3.3.1.2.1.18 | IpAddress | RW | ||||||||||
column · IpAddress · read-write · current IP address of the management port associated to this VNS. This value has meaning if vnsMode is bridgeAtController(2). | |||||||||||||
| CvnsSuppressSSID | 1.3.6.1.4.1.4329.15.3.3.1.2.1.19 | TruthValue | RW | ||||||||||
column · TruthValue · read-write · current If set to true, this prevents this SSID from appearing in the beacon message. | |||||||||||||
| CvnsEnable11hSupport | 1.3.6.1.4.1.4329.15.3.3.1.2.1.20 | TruthValue | RW | ||||||||||
column · TruthValue · read-write · current If true, enables 802.11h support. | |||||||||||||
| CvnsApplyPowerBackOff | 1.3.6.1.4.1.4329.15.3.3.1.2.1.21 | TruthValue | RW | ||||||||||
column · TruthValue · read-write · current Indicates whether the AP will direct 802.11h-enabled clients to apply the same power back-off setting that the AP is using | |||||||||||||
| CvnsProcessClientIEReq | 1.3.6.1.4.1.4329.15.3.3.1.2.1.22 | TruthValue | RW | ||||||||||
column · TruthValue · read-write · current If true, enables support for 802.11d client information request. | |||||||||||||
| CvnsDLSSupportEnable | 1.3.6.1.4.1.4329.15.3.3.1.2.1.23 | TruthValue | RW | ||||||||||
column · TruthValue · read-write · current If true, enables support for DLS Support. This value has meaning only if vnsUseDHCPRelay is selected as localDhcp(2) and vnsMode is select as either routed(1) or bridgeAtController(2). | |||||||||||||
| CvnsDLSAddress | 1.3.6.1.4.1.4329.15.3.3.1.2.1.24 | DisplayString | RW | ||||||||||
column · DisplayString · read-write · current DNS IP Address for DLS associated to this VNS. It could be IP address or Name | |||||||||||||
| CvnsDLSPort | 1.3.6.1.4.1.4329.15.3.3.1.2.1.25 | Integer32 | RW | ||||||||||
column · Integer32 · read-write · current DNS Port for DLS associated to this VNS. | |||||||||||||
| CvnsRateControlProfile | 1.3.6.1.4.1.4329.15.3.3.1.2.1.26 | DisplayString | RW | ||||||||||
column · DisplayString · read-write · current The Rate Control Profile that is referenced by this VNS. | |||||||||||||
| CvnsSessionAvailabilityEnable | 1.3.6.1.4.1.4329.15.3.3.1.2.1.27 | TruthValue | RW | ||||||||||
column · TruthValue · read-write · current To indicate if Session Availability feature is enabled. | |||||||||||||
| CvnsEnabled | 1.3.6.1.4.1.4329.15.3.3.1.2.1.28 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current VNS status of being enabled or disabled.
| |||||||||||||
| CvnsStrictSubnetAdherence | 1.3.6.1.4.1.4329.15.3.3.1.2.1.29 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Subnet adherence verification status for the VNS. Controller only learns devices whose address is within range of VNS segment definition. Disabling this field causes to not enforce validation. Doing so, may expose the controller to in-advertent Learning DoS attacks.
| |||||||||||||
| CvnsSLPEnabled | 1.3.6.1.4.1.4329.15.3.3.1.2.1.30 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Status of SLP flag on Bridge at Controller type VNS. This field does not have any meaning for other types of VNS.
| |||||||||||||
| CvnsConfigWLANID | 1.3.6.1.4.1.4329.15.3.3.1.2.1.31 | Unsigned32 | RW | ||||||||||
column · Unsigned32 · read-write · current Creation of VNS requires existing of a free WLAN. One WLAN can only be used in one VNS only. This ID identifies the WLAN that is used for creation of VNS that is identified by this row. | |||||||||||||
| TvnsDHCPRangeTable | 1.3.6.1.4.1.4329.15.3.3.1.3 | NA | |||||||||||
table · not-accessible · current vnsDHCPRangeTable contains the IP address ranges that DHCP will serve to clients associated with this VNS. | |||||||||||||
| RvnsDHCPRangeEntry | 1.3.6.1.4.1.4329.15.3.3.1.3.1 | NA | |||||||||||
row · not-accessible · current Configuration information for a DHCP range.
| |||||||||||||
| CvnsDHCPRangeIndex | 1.3.6.1.4.1.4329.15.3.3.1.3.1.1 | Integer32 (1..2147483647) | RW | ||||||||||
column · Integer32 (1..2147483647) · read-write · current Index for the DHCP row element. | |||||||||||||
| CvnsDHCPRangeStart | 1.3.6.1.4.1.4329.15.3.3.1.3.1.2 | IpAddress | RW | ||||||||||
column · IpAddress · read-write · current First IP address in the range. | |||||||||||||
| CvnsDHCPRangeEnd | 1.3.6.1.4.1.4329.15.3.3.1.3.1.3 | IpAddress | RW | ||||||||||
column · IpAddress · read-write · current Last IP address in the range. | |||||||||||||
| CvnsDHCPRangeType | 1.3.6.1.4.1.4329.15.3.3.1.3.1.4 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Determines whether addresses in the specified range will be included, or excluded by the DHCP server.
| |||||||||||||
| CvnsDHCPRangeStatus | 1.3.6.1.4.1.4329.15.3.3.1.3.1.5 | RowStatus | RW | ||||||||||
column · RowStatus · read-write · current Row status variable for row operations on the vnsDHCPRangeTable | |||||||||||||
| TvnsCaptivePortalTable | 1.3.6.1.4.1.4329.15.3.3.1.4 | NA | |||||||||||
table · not-accessible · current Details of the Captive Portal login page for VNSes that have vnsAssignment=ssid and vnsAuthModel=captivePortal. | |||||||||||||
| RvnsCaptivePortalEntry | 1.3.6.1.4.1.4329.15.3.3.1.4.1 | NA | |||||||||||
| CcpURL | 1.3.6.1.4.1.4329.15.3.3.1.4.1.1 | DisplayString | RW | ||||||||||
column · DisplayString · read-write · current Redirect URL of the Captive Portal login page. | |||||||||||||
| CcpLoginLabel | 1.3.6.1.4.1.4329.15.3.3.1.4.1.2 | DisplayString | RW | deprecated | |||||||||
column · DisplayString · read-write · deprecated Label that appears in front of the login field on the Captive Portal login page. | |||||||||||||
| CcpPasswordLabel | 1.3.6.1.4.1.4329.15.3.3.1.4.1.3 | DisplayString | RW | deprecated | |||||||||
column · DisplayString · read-write · deprecated Label that appears in front of the password field on the Captive Portal login page. | |||||||||||||
| CcpHeaderURL | 1.3.6.1.4.1.4329.15.3.3.1.4.1.4 | DisplayString | RW | deprecated | |||||||||
column · DisplayString · read-write · deprecated URL of the Captive Portal header. | |||||||||||||
| CcpFooterURL | 1.3.6.1.4.1.4329.15.3.3.1.4.1.5 | DisplayString | RW | deprecated | |||||||||
column · DisplayString · read-write · deprecated URL of the Captive Portal footer. | |||||||||||||
| CcpMessage | 1.3.6.1.4.1.4329.15.3.3.1.4.1.6 | DisplayString | RW | deprecated | |||||||||
column · DisplayString · read-write · deprecated A welcome message, or set of instructions that is to appear on the Captive Portal login page. | |||||||||||||
| CcpReplaceGatewayWithFQDN | 1.3.6.1.4.1.4329.15.3.3.1.4.1.7 | DisplayString | RW | ||||||||||
column · DisplayString · read-write · current Fully Qualified Domain Name (FQDN) to be used as the gateway IP address. | |||||||||||||
| CcpDefaultRedirectionURL | 1.3.6.1.4.1.4329.15.3.3.1.4.1.8 | DisplayString | RW | ||||||||||
column · DisplayString · read-write · current Default Redirect URL of the Captive Portal login page. | |||||||||||||
| CcpConnectionIP | 1.3.6.1.4.1.4329.15.3.3.1.4.1.9 | IpAddress | RW | ||||||||||
column · IpAddress · read-write · current IP address of the Controller interface for Captive Portal. | |||||||||||||
| CcpConnectionPort | 1.3.6.1.4.1.4329.15.3.3.1.4.1.10 | Integer32 | RW | ||||||||||
column · Integer32 · read-write · current Port number on the cpConnectionIP interface. | |||||||||||||
| CcpSharedSecret | 1.3.6.1.4.1.4329.15.3.3.1.4.1.11 | OCTET STRING | RW | ||||||||||
column · OCTET STRING · read-write · current Secret Key to be used to encrypt the information passed between the Controller and the external web server. It is the password common to both Controller and the external web server. | |||||||||||||
| CcpLogOff | 1.3.6.1.4.1.4329.15.3.3.1.4.1.12 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Toggles the display of logoff popup screen, allowing users to control their logoff.
| |||||||||||||
| CcpStatusCheck | 1.3.6.1.4.1.4329.15.3.3.1.4.1.13 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Toggles the display of popup window with session statistics for users to monitor their usage and time left in session.
| |||||||||||||
| CcpType | 1.3.6.1.4.1.4329.15.3.3.1.4.1.14 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Type of captive portal is enabled for the selected VNS. none(1) = no captive portal configured or type is unknown. internal(2) = internal captive portal. external(4) = external captive portal. guestPortal (5) = open host captive portal.
| |||||||||||||
| TvnsRadiusServerTable | 1.3.6.1.4.1.4329.15.3.3.1.5 | NA | |||||||||||
table · not-accessible · current List of RADIUS servers to be utilized for authentication in the VNS. | |||||||||||||
| RvnsRadiusServerEntry | 1.3.6.1.4.1.4329.15.3.3.1.5.1 | NA | |||||||||||
row · not-accessible · current Configuration information for a RADIUS server.
| |||||||||||||
| CvnsRadiusServerName | 1.3.6.1.4.1.4329.15.3.3.1.5.1.1 | DisplayString (SIZE (0..64)) | RW | ||||||||||
column · DisplayString (SIZE (0..64)) · read-write · current Name of the RADIUS server. | |||||||||||||
| CvnsRadiusServerPort | 1.3.6.1.4.1.4329.15.3.3.1.5.1.2 | Integer32 | RW | ||||||||||
column · Integer32 · read-write · current Port number for the RADIUS server. | |||||||||||||
| CvnsRadiusServerRetries | 1.3.6.1.4.1.4329.15.3.3.1.5.1.3 | Integer32 | RW | ||||||||||
column · Integer32 · read-write · current Number of retries for a RADIUS authentication request. | |||||||||||||
| CvnsRadiusServerTimeout | 1.3.6.1.4.1.4329.15.3.3.1.5.1.4 | Integer32 | RW | ||||||||||
column · Integer32 · read-write · current Delay between requests. | |||||||||||||
| CvnsRadiusServerSharedSecret | 1.3.6.1.4.1.4329.15.3.3.1.5.1.5 | DisplayString | RW | ||||||||||
column · DisplayString · read-write · current Shared secret to be used between the NAS and RADIUS server. | |||||||||||||
| CvnsRadiusServerNASIdentifier | 1.3.6.1.4.1.4329.15.3.3.1.5.1.6 | DisplayString | RW | ||||||||||
column · DisplayString · read-write · current NAS identifier to be included in RADIUS request. | |||||||||||||
| CvnsRadiusServerAuthType | 1.3.6.1.4.1.4329.15.3.3.1.5.1.7 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Challenge mechanism for the request.
| |||||||||||||
| CvnsRadiusServerRowStatus | 1.3.6.1.4.1.4329.15.3.3.1.5.1.8 | RowStatus | RW | ||||||||||
column · RowStatus · read-write · current RowStatus value for manipulating vnsRADIUSServerTable. | |||||||||||||
| CvnsRadiusServerNasAddress | 1.3.6.1.4.1.4329.15.3.3.1.5.1.9 | IpAddress | RW | ||||||||||
column · IpAddress · read-write · current NAS address to be included in RADIUS request. | |||||||||||||
| TvnsFilterIDTable | 1.3.6.1.4.1.4329.15.3.3.1.6 | NA | |||||||||||
table · not-accessible · current Table of names filters for a VNS. | |||||||||||||
| RvnsFilterIDEntry | 1.3.6.1.4.1.4329.15.3.3.1.6.1 | NA | |||||||||||
| CvnsFilterID | 1.3.6.1.4.1.4329.15.3.3.1.6.1.1 | DisplayString | RW | ||||||||||
column · DisplayString · read-write · current Filter names. | |||||||||||||
| CvnsFilterIDStatus | 1.3.6.1.4.1.4329.15.3.3.1.6.1.2 | RowStatus | RW | ||||||||||
column · RowStatus · read-write · current RowStatus for operating on vnsFilterIDTable. | |||||||||||||
| TvnsFilterRuleTable | 1.3.6.1.4.1.4329.15.3.3.1.7 | NA | |||||||||||
table · not-accessible · current Table containing specific filters for a named filter. | |||||||||||||
| RvnsFilterRuleEntry | 1.3.6.1.4.1.4329.15.3.3.1.7.1 | NA | |||||||||||
row · not-accessible · current Filter elements for an individual VNS filter.
| |||||||||||||
| CvnsFilterRuleOrder | 1.3.6.1.4.1.4329.15.3.3.1.7.1.1 | Integer32 (1..65532) | RW | ||||||||||
column · Integer32 (1..65532) · read-write · current Position of the filter in the filter list. | |||||||||||||
| CvnsFilterRuleDirection | 1.3.6.1.4.1.4329.15.3.3.1.7.1.2 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Traffic direction defined by the rule.
| |||||||||||||
| CvnsFilterRuleAction | 1.3.6.1.4.1.4329.15.3.3.1.7.1.3 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Allow or deny traffic for the filter.
| |||||||||||||
| CvnsFilterRuleIPAddress | 1.3.6.1.4.1.4329.15.3.3.1.7.1.4 | IpAddress | RW | ||||||||||
column · IpAddress · read-write · current IP address to apply the filter. | |||||||||||||
| CvnsFilterRulePortLow | 1.3.6.1.4.1.4329.15.3.3.1.7.1.5 | Integer32 | RW | ||||||||||
column · Integer32 · read-write · current Low port number for the filter. | |||||||||||||
| CvnsFilterRulePortHigh | 1.3.6.1.4.1.4329.15.3.3.1.7.1.6 | Integer32 | RW | ||||||||||
column · Integer32 · read-write · current High port number for the filter. | |||||||||||||
| CvnsFilterRuleProtocol | 1.3.6.1.4.1.4329.15.3.3.1.7.1.7 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Specific protocol to filter.
| |||||||||||||
| CvnsFilterRuleEtherType | 1.3.6.1.4.1.4329.15.3.3.1.7.1.8 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Specific ethertype to filter.
| |||||||||||||
| CvnsFilterRuleStatus | 1.3.6.1.4.1.4329.15.3.3.1.7.1.9 | RowStatus | RW | ||||||||||
column · RowStatus · read-write · current RowStatus value for the vnsFilterRuleTable. | |||||||||||||
| TvnsPrivacyTable | 1.3.6.1.4.1.4329.15.3.3.1.8 | NA | |||||||||||
table · not-accessible · current Table of privacy settings for the VNS. | |||||||||||||
| RvnsPrivacyEntry | 1.3.6.1.4.1.4329.15.3.3.1.8.1 | NA | |||||||||||
| CvnsPrivWEPKeyType | 1.3.6.1.4.1.4329.15.3.3.1.8.1.1 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Type of key in use. none(1) = not cofigured, wepstatic(2) = static WEP, wpapsk(3) = WPA Pre-Shared Key, dynamic(4) = dynamically assigned, wpa(5) = WPA.
| |||||||||||||
| CvnsPrivDynamicRekeyFrequency | 1.3.6.1.4.1.4329.15.3.3.1.8.1.2 | Integer32 | RW | ||||||||||
column · Integer32 · read-write · current Dynamic WEP re-keying frequency, in seconds. Setting this value to 0 disables rekeying. This value is only meaningful if vnsPrivWEPKeyType = wpapsk(3). For any other values of vnsPrivWEPKeyType, reading or setting this value will return an unsuccessful status and will return a value of null or zero. | |||||||||||||
| CvnsPrivWEPKeyLength | 1.3.6.1.4.1.4329.15.3.3.1.8.1.3 | Integer32 | RW | ||||||||||
column · Integer32 · read-write · current WEP key length, 64, 128, or 152 bits. If vnsPrivWEPKeyType is none, reading or setting this value will return an unsuccessful status and will return a value of null or zero. | |||||||||||||
| CvnsPrivWPA1Enabled | 1.3.6.1.4.1.4329.15.3.3.1.8.1.4 | TruthValue | RW | ||||||||||
column · TruthValue · read-write · current Enables WPA.1 (Wi-Fi Protected Access). | |||||||||||||
| CvnsPrivUseSharedKey | 1.3.6.1.4.1.4329.15.3.3.1.8.1.5 | TruthValue | RW | ||||||||||
column · TruthValue · read-write · current Enables the use of WPA shared key for this VNS. | |||||||||||||
| CvnsPrivWPASharedKey | 1.3.6.1.4.1.4329.15.3.3.1.8.1.6 | DisplayString | RW | ||||||||||
column · DisplayString · read-write · current The value of the WPA shared key for this VNS. This value is logically WRITE ONLY. Attempts to read this value shall return unsuccessful status and values of null or zero. | |||||||||||||
| CvnsPrivWPA2Enabled | 1.3.6.1.4.1.4329.15.3.3.1.8.1.7 | TruthValue | RW | ||||||||||
column · TruthValue · read-write · current When true, WPA v.2 support is enabled. | |||||||||||||
| TvnsWEPKeyTable | 1.3.6.1.4.1.4329.15.3.3.1.9 | NA | |||||||||||
table · not-accessible · current Table of WEP key entries for a static WEP definition. | |||||||||||||
| RvnsWEPKeyEntry | 1.3.6.1.4.1.4329.15.3.3.1.9.1 | NA | |||||||||||
| CvnsWEPKeyIndex | 1.3.6.1.4.1.4329.15.3.3.1.9.1.1 | Integer32 (1..4) | RW | ||||||||||
column · Integer32 (1..4) · read-write · current Table index for the WEP key. | |||||||||||||
| CvnsWEPKeyValue | 1.3.6.1.4.1.4329.15.3.3.1.9.1.2 | WEPKeytype | RW | ||||||||||
column · WEPKeytype · read-write · current Value of a WEP key for this VNS. This value is logically WRITE ONLY. Attempts to read this value shall return unsuccessful status and values of null or zero. | |||||||||||||
| Tvns3rdPartyAPTable | 1.3.6.1.4.1.4329.15.3.3.1.10 | NA | |||||||||||
table · not-accessible · current Contains a list of 3rd Party access points for the EWC. | |||||||||||||
| Rvns3rdPartyAPEntry | 1.3.6.1.4.1.4329.15.3.3.1.10.1 | NA | |||||||||||
row · not-accessible · current Configuration information for a 3rd party access point.
| |||||||||||||
| CapMacAddress | 1.3.6.1.4.1.4329.15.3.3.1.10.1.1 | MacAddress | RW | ||||||||||
column · MacAddress · read-write · current Ethernet MAC address of the 3rd party access point. | |||||||||||||
| CapIpAddress | 1.3.6.1.4.1.4329.15.3.3.1.10.1.2 | IpAddress | RW | ||||||||||
column · IpAddress · read-write · current IP address of the 3rd party access point. | |||||||||||||
| TvnsQoSTable | 1.3.6.1.4.1.4329.15.3.3.1.11 | NA | |||||||||||
table · not-accessible · current This table contains list of per-VNS QoS related configuration. | |||||||||||||
| RvnsQoSEntry | 1.3.6.1.4.1.4329.15.3.3.1.11.1 | NA | |||||||||||
row · not-accessible · current An entry related to QoS configuration for the VNS indexed by vnsIfIndex.
| |||||||||||||
| CvnsQoSWirelessLegacyFlag | 1.3.6.1.4.1.4329.15.3.3.1.11.1.1 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current This variable is used to enable/disable legacy QoS feature.
| |||||||||||||
| CvnsQoSWirelessWMMFlag | 1.3.6.1.4.1.4329.15.3.3.1.11.1.2 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current This variable is used to enable/disable WMM feature.
| |||||||||||||
| CvnsQoSWireless80211eFlag | 1.3.6.1.4.1.4329.15.3.3.1.11.1.3 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current This variable is used to enable/disable 802.11e feature.
| |||||||||||||
| CvnsQoSWirelessTurboVoiceFlag | 1.3.6.1.4.1.4329.15.3.3.1.11.1.4 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current This variable is used to enable/disable turbo feature.
| |||||||||||||
| CvnsQoSPriorityOverrideFlag | 1.3.6.1.4.1.4329.15.3.3.1.11.1.5 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Enable/disable the use of DSCP to override Servic Class (SC) value.
| |||||||||||||
| CvnsQoSPriorityOverrideSC | 1.3.6.1.4.1.4329.15.3.3.1.11.1.6 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Service class (SC) of the override value. This field has a meaning if vnsQoSPriorityOverrideFlag is enabled.
| |||||||||||||
| CvnsQoSPriorityOverrideDSCP | 1.3.6.1.4.1.4329.15.3.3.1.11.1.7 | Integer32 (0..63) | RW | ||||||||||
column · Integer32 (0..63) · read-write · current DSCP override value to be used for the service class. This field has a meaning if vnsQoSPriorityOverrideFlag is enabled. | |||||||||||||
| CvnsQoSClassificationServiceClass | 1.3.6.1.4.1.4329.15.3.3.1.11.1.8 | OCTET STRING (SIZE (0..64)) | RW | ||||||||||
column · OCTET STRING (SIZE (0..64)) · read-write · current Service Class value for the DSCP code. This field is 64-bytes long. Each byte represents mapping between DSCP and Service Class. Position of each byte in the array represents DSCP code and the content of each byte represents the service class value for that DSCP code. For example, second byte represents DSCP code 1 and its value represents SC value. Value for each byte is equivalent to either of: background = 0, bestEffort = 1, bronze = 2, silver = 3, gold = 4, platinum = 5, premiumVoice = 6, networkControl = 7 | |||||||||||||
| CvnsQoSWirelessEnableUAPSD | 1.3.6.1.4.1.4329.15.3.3.1.11.1.9 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current This variable is used to enable/disable U-APSD feature.
| |||||||||||||
| CvnsQoSWirelessUseAdmControlVoice | 1.3.6.1.4.1.4329.15.3.3.1.11.1.10 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current If enabled, admission control for voice traffic is used.
| |||||||||||||
| CvnsQoSWirelessUseAdmControlVideo | 1.3.6.1.4.1.4329.15.3.3.1.11.1.11 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current If enabled, admission control for vedio traffic is used. This field has a meaning if vnsQoSUseGlobalAdmVoice is enabled.
| |||||||||||||
| CvnsQoSWirelessULPolicerAction | 1.3.6.1.4.1.4329.15.3.3.1.11.1.12 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current If doNothing is selected, no action is taken. This is default value. If sendDELTStoClient is selected, AP will send DELTS if a client is abusing in uplink. This field has a meaning only if admission control is enabled for VO or VI.
| |||||||||||||
| CvnsQoSWirelessDLPolicerAction | 1.3.6.1.4.1.4329.15.3.3.1.11.1.13 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current If doNothing is selected, no action is taken. This is default value.
If downgrade is selected, AP will downgrade all traffic to the
highest AC that does not require CAC in downlink.
If drop is selected, AP will drop client if it observes a client
that is illegally using an AC that has CAC mandatory in downlink.
This field has a meaning only if admission control is enabled for
VO or VI.
| |||||||||||||
| CvnsQoSWirelessUseAdmControlBestEffort | 1.3.6.1.4.1.4329.15.3.3.1.11.1.14 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current If enabled, admission control for video traffic is set to Best Effort. This field has a meaning if vnsQoSUseGlobalAdmVoice is enabled.
| |||||||||||||
| CvnsQoSWirelessUseAdmControlBackground | 1.3.6.1.4.1.4329.15.3.3.1.11.1.15 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current If enabled, admission control for video traffic is set to Background. This field has a meaning if vnsQoSUseGlobalAdmVoice is enabled.
| |||||||||||||
| TvnsWDSRFTable | 1.3.6.1.4.1.4329.15.3.3.1.12 | NA | obsolete | ||||||||||
table · not-accessible · obsolete ontains definitions of the Wireless Distirbution System (WDS) VNS defined on this Controller. | |||||||||||||
| RvnsWDSRFEntry | 1.3.6.1.4.1.4329.15.3.3.1.12.1 | NA | obsolete | ||||||||||
row · not-accessible · obsolete Configuration elements for a specific WDS VNS.
| |||||||||||||
| CvnsWDSRFAPName | 1.3.6.1.4.1.4329.15.3.3.1.12.1.1 | DisplayString | RW | obsolete | |||||||||
column · DisplayString · read-write · obsolete AP name. | |||||||||||||
| CvnsWDSRFbgService | 1.3.6.1.4.1.4329.15.3.3.1.12.1.2 | INTEGER | RW | obsolete | |||||||||
column · INTEGER · read-write · obsolete Type of service offered by this radio.
| |||||||||||||
| CvnsWDSRFaService | 1.3.6.1.4.1.4329.15.3.3.1.12.1.3 | INTEGER | RW | obsolete | |||||||||
column · INTEGER · read-write · obsolete Type of service offered by this radio.
| |||||||||||||
| CvnsWDSRFPreferredParent | 1.3.6.1.4.1.4329.15.3.3.1.12.1.4 | DisplayString | RW | obsolete | |||||||||
column · DisplayString · read-write · obsolete Desired preferred parent. | |||||||||||||
| CvnsWDSRFBackupParent | 1.3.6.1.4.1.4329.15.3.3.1.12.1.5 | DisplayString | RW | obsolete | |||||||||
column · DisplayString · read-write · obsolete Desired backup parent. | |||||||||||||
| CvnsWDSRFBridge | 1.3.6.1.4.1.4329.15.3.3.1.12.1.6 | INTEGER | RW | obsolete | |||||||||
column · INTEGER · read-write · obsolete WDS bridge status.
| |||||||||||||
| TvnsRateControlProfTable | 1.3.6.1.4.1.4329.15.3.3.1.13 | NA | obsolete | ||||||||||
table · not-accessible · obsolete Table of Rate Control Profiles. | |||||||||||||
| RvnsRateControlProfEntry | 1.3.6.1.4.1.4329.15.3.3.1.13.1 | NA | obsolete | ||||||||||
| CvnsRateControlProfInd | 1.3.6.1.4.1.4329.15.3.3.1.13.1.1 | Unsigned32 | RW | obsolete | |||||||||
column · Unsigned32 · read-write · obsolete A monotonically increasing integer which acts as index of entries within the named Rate Control Profiles. | |||||||||||||
| CvnsRateControlProfName | 1.3.6.1.4.1.4329.15.3.3.1.13.1.2 | DisplayString | RW | obsolete | |||||||||
column · DisplayString · read-write · obsolete Rate Control Profile Name. | |||||||||||||
| CvnsRateControlCIR | 1.3.6.1.4.1.4329.15.3.3.1.13.1.3 | Unsigned32 | RW | obsolete | |||||||||
column · Unsigned32 · read-write · obsolete Rate Control Average Rate (CIR) in kbps. | |||||||||||||
| CvnsRateControlCBS | 1.3.6.1.4.1.4329.15.3.3.1.13.1.4 | Unsigned32 | RW | obsolete | |||||||||
column · Unsigned32 · read-write · obsolete Rate Control Burst Size (CBS) in bytes. | |||||||||||||
| TvnsAPFilterTable | 1.3.6.1.4.1.4329.15.3.3.1.14 | NA | |||||||||||
table · not-accessible · current Filters applied to Access Points via VNS settings and assignments. | |||||||||||||
| RvnsAPFilterEntry | 1.3.6.1.4.1.4329.15.3.3.1.14.1 | NA | |||||||||||
row · not-accessible · current An entry containing filters definition for Access Points assigned to VNS that is identified by VNS index. | |||||||||||||
| CvnsAPFilterRuleOrder | 1.3.6.1.4.1.4329.15.3.3.1.14.1.1 | Integer32 (1..65535) | RC | ||||||||||
column · Integer32 (1..65535) · read-create · current Position of the filter in the filter list. | |||||||||||||
| CvnsAPFilterRuleDirection | 1.3.6.1.4.1.4329.15.3.3.1.14.1.2 | INTEGER | RC | ||||||||||
column · INTEGER · read-create · current Traffic direction related to the filter rule.
| |||||||||||||
| CvnsAPFilterAction | 1.3.6.1.4.1.4329.15.3.3.1.14.1.3 | Integer32 | RC | ||||||||||
column · Integer32 · read-create · current Allow or deny traffic for the filter. | |||||||||||||
| CvnsAPFilterIPAddress | 1.3.6.1.4.1.4329.15.3.3.1.14.1.4 | IpAddress | RC | ||||||||||
column · IpAddress · read-create · current IP address applied to the filter. | |||||||||||||
| CvnsAPFilterMask | 1.3.6.1.4.1.4329.15.3.3.1.14.1.5 | IpAddress | RC | ||||||||||
column · IpAddress · read-create · current The mask, number of bits set to one in the mask, applied to filter IP address. | |||||||||||||
| CvnsAPFilterPortLow | 1.3.6.1.4.1.4329.15.3.3.1.14.1.6 | Integer32 | RC | ||||||||||
column · Integer32 · read-create · current Low port number for the filter. | |||||||||||||
| CvnsAPFilterPortHigh | 1.3.6.1.4.1.4329.15.3.3.1.14.1.7 | Integer32 | RC | ||||||||||
column · Integer32 · read-create · current High port number for the filter. | |||||||||||||
| CvnsAPFilterProtocol | 1.3.6.1.4.1.4329.15.3.3.1.14.1.8 | Integer32 | RC | ||||||||||
column · Integer32 · read-create · current Specific protocol for the filter. | |||||||||||||
| CvnsAPFilterEtherType | 1.3.6.1.4.1.4329.15.3.3.1.14.1.9 | INTEGER | RC | ||||||||||
column · INTEGER · read-create · current Specific ethertype to the filter.
| |||||||||||||
| CvnsAPFilterRowStatus | 1.3.6.1.4.1.4329.15.3.3.1.14.1.10 | Integer32 | RC | ||||||||||
column · Integer32 · read-create · current RowStatus value for this table entry. | |||||||||||||
| NvnsStatsObjects | 1.3.6.1.4.1.4329.15.3.3.2 | ||||||||||||
| SactiveVNSSessionCount | 1.3.6.1.4.1.4329.15.3.3.2.1 | Integer32 | RW | ||||||||||
scalar · Integer32 · read-write · current Number of active VNSs. | |||||||||||||
| TvnsStatTable | 1.3.6.1.4.1.4329.15.3.3.2.2 | NA | obsolete | ||||||||||
table · not-accessible · obsolete Description. | |||||||||||||
| RvnsStatEntry | 1.3.6.1.4.1.4329.15.3.3.2.2.1 | NA | obsolete | ||||||||||
| CvnsStatName | 1.3.6.1.4.1.4329.15.3.3.2.2.1.1 | OCTET STRING | RW | obsolete | |||||||||
column · OCTET STRING · read-write · obsolete Name of the VNS. | |||||||||||||
| CvnsStatTxPkts | 1.3.6.1.4.1.4329.15.3.3.2.2.1.2 | Counter64 | RO | obsolete | |||||||||
column · Counter64 · read-only · obsolete Trasmitted packets. | |||||||||||||
| CvnsStatRxPkts | 1.3.6.1.4.1.4329.15.3.3.2.2.1.3 | Counter64 | RO | obsolete | |||||||||
column · Counter64 · read-only · obsolete Received packtes. | |||||||||||||
| CvnsStatTxOctects | 1.3.6.1.4.1.4329.15.3.3.2.2.1.4 | Counter64 | RO | obsolete | |||||||||
column · Counter64 · read-only · obsolete Trasmitted octects. | |||||||||||||
| CvnsStatRxOctects | 1.3.6.1.4.1.4329.15.3.3.2.2.1.5 | Counter64 | RO | obsolete | |||||||||
column · Counter64 · read-only · obsolete Received octets. | |||||||||||||
| CvnsStatMulticastTxPkts | 1.3.6.1.4.1.4329.15.3.3.2.2.1.6 | Counter64 | RO | obsolete | |||||||||
column · Counter64 · read-only · obsolete Multicast trasmitted packets. | |||||||||||||
| CvnsStatMulticastRxPkts | 1.3.6.1.4.1.4329.15.3.3.2.2.1.7 | Counter64 | RO | obsolete | |||||||||
column · Counter64 · read-only · obsolete Multicast received packets. | |||||||||||||
| CvnsStatBroadcastTxPkts | 1.3.6.1.4.1.4329.15.3.3.2.2.1.8 | Counter64 | RO | obsolete | |||||||||
column · Counter64 · read-only · obsolete Broadcast trasmitted packets. | |||||||||||||
| CvnsStatBroadcastRxPkts | 1.3.6.1.4.1.4329.15.3.3.2.2.1.9 | Counter64 | RO | obsolete | |||||||||
column · Counter64 · read-only · obsolete Broadcast received packets. | |||||||||||||
| CvnsStatRadiusTotRequests | 1.3.6.1.4.1.4329.15.3.3.2.2.1.10 | Counter64 | RO | obsolete | |||||||||
column · Counter64 · read-only · obsolete Total requests sent to radius server. | |||||||||||||
| CvnsStatRadiusReqFailed | 1.3.6.1.4.1.4329.15.3.3.2.2.1.11 | Counter64 | RO | obsolete | |||||||||
column · Counter64 · read-only · obsolete Requests that failed to be processed by radius server. | |||||||||||||
| CvnsStatRadiusReqRejected | 1.3.6.1.4.1.4329.15.3.3.2.2.1.12 | Counter64 | RO | obsolete | |||||||||
column · Counter64 · read-only · obsolete Requests that have been rejected by radius server. | |||||||||||||
| TvnsExceptionStatTable | 1.3.6.1.4.1.4329.15.3.3.2.3 | NA | obsolete | ||||||||||
table · not-accessible · obsolete Description. | |||||||||||||
| RvnsExceptionStatEntry | 1.3.6.1.4.1.4329.15.3.3.2.3.1 | NA | obsolete | ||||||||||
| CvnsExceptionFiterName | 1.3.6.1.4.1.4329.15.3.3.2.3.1.1 | OCTET STRING (SIZE (1..64)) | RW | obsolete | |||||||||
column · OCTET STRING (SIZE (1..64)) · read-write · obsolete Filter name. | |||||||||||||
| CvnsExceptionStatPktsDenied | 1.3.6.1.4.1.4329.15.3.3.2.3.1.2 | Counter64 | RO | obsolete | |||||||||
column · Counter64 · read-only · obsolete Total packets that are denied by defined filters. | |||||||||||||
| CvnsExceptionStatPktsAllowed | 1.3.6.1.4.1.4329.15.3.3.2.3.1.3 | Counter64 | RO | obsolete | |||||||||
column · Counter64 · read-only · obsolete Total packets that are allowed by defined filters. | |||||||||||||
| TvnsWDSStatTable | 1.3.6.1.4.1.4329.15.3.3.2.4 | NA | obsolete | ||||||||||
table · not-accessible · obsolete Description. | |||||||||||||
| RvnsWDSStatEntry | 1.3.6.1.4.1.4329.15.3.3.2.4.1 | NA | obsolete | ||||||||||
| CvnsWDSStatAPName | 1.3.6.1.4.1.4329.15.3.3.2.4.1.1 | DisplayString | RW | obsolete | |||||||||
column · DisplayString · read-write · obsolete AP name serving WDS VNS. | |||||||||||||
| CvnsWDSStatAPRole | 1.3.6.1.4.1.4329.15.3.3.2.4.1.2 | INTEGER | RW | obsolete | |||||||||
column · INTEGER · read-write · obsolete Role of the AP in WDS tree. All the statistics and configuration information in this table has no meaning if the role is unknown(-1).
| |||||||||||||
| CvnsWDSStatAPRadio | 1.3.6.1.4.1.4329.15.3.3.2.4.1.3 | DisplayString (SIZE (0..15)) | RW | obsolete | |||||||||
column · DisplayString (SIZE (0..15)) · read-write · obsolete Radio and freq on which uplink WDS is established, N/A if connected over etherent (value are 'a:<freq>', 'b/g:<freq>', or 'N/A') | |||||||||||||
| CvnsWDSStatAPParent | 1.3.6.1.4.1.4329.15.3.3.2.4.1.4 | DisplayString | RW | obsolete | |||||||||
column · DisplayString · read-write · obsolete AP Name of the parent AP. | |||||||||||||
| CvnsWDSStatSSID | 1.3.6.1.4.1.4329.15.3.3.2.4.1.5 | DisplayString (SIZE (0..32)) | RW | obsolete | |||||||||
column · DisplayString (SIZE (0..32)) · read-write · obsolete SSID of the WDS VNS where parent WDS link is established. | |||||||||||||
| CvnsWDSStatRxFrame | 1.3.6.1.4.1.4329.15.3.3.2.4.1.6 | Counter64 | RW | obsolete | |||||||||
column · Counter64 · read-write · obsolete Received frames from the parent AP. | |||||||||||||
| CvnsWDSStatTxFrame | 1.3.6.1.4.1.4329.15.3.3.2.4.1.7 | Counter64 | RW | obsolete | |||||||||
column · Counter64 · read-write · obsolete Transmitted frames to the parent AP. | |||||||||||||
| CvnsWDSStatRxError | 1.3.6.1.4.1.4329.15.3.3.2.4.1.8 | Counter64 | RW | obsolete | |||||||||
column · Counter64 · read-write · obsolete Received frames in error from the parent AP. | |||||||||||||
| CvnsWDSStatTxError | 1.3.6.1.4.1.4329.15.3.3.2.4.1.9 | Counter64 | RW | obsolete | |||||||||
column · Counter64 · read-write · obsolete Transmitted frames in error to the parent AP. | |||||||||||||
| CvnsWDSStatRxRSSI | 1.3.6.1.4.1.4329.15.3.3.2.4.1.10 | Integer32 (0..64) | RW | obsolete | |||||||||
column · Integer32 (0..64) · read-write · obsolete Average Received Signal Strength Indicator (RSSI). | |||||||||||||
| CvnsWDSStatRxRate | 1.3.6.1.4.1.4329.15.3.3.2.4.1.11 | Counter64 | RW | obsolete | |||||||||
column · Counter64 · read-write · obsolete Average receive rate. | |||||||||||||
| CvnsWDSStatTxRate | 1.3.6.1.4.1.4329.15.3.3.2.4.1.12 | Counter64 | RW | obsolete | |||||||||
column · Counter64 · read-write · obsolete Average transmission rate. | |||||||||||||
| NvnsGlobalSetting | 1.3.6.1.4.1.4329.15.3.3.3 | ||||||||||||
| NwirelessQoS | 1.3.6.1.4.1.4329.15.3.3.3.1 | ||||||||||||
| SmaxVoiceBWforReassociation | 1.3.6.1.4.1.4329.15.3.3.3.1.1 | Integer32 (0..100) | RW | ||||||||||
scalar · Integer32 (0..100) · read-write · current Maximum voice bandwidth to be used for re-association. | |||||||||||||
| SmaxVoiceBWforAssociation | 1.3.6.1.4.1.4329.15.3.3.3.1.2 | Integer32 (0..100) | RW | ||||||||||
scalar · Integer32 (0..100) · read-write · current Maximum voice bandwidth to be used for association. | |||||||||||||
| SmaxVideoBWforReassociation | 1.3.6.1.4.1.4329.15.3.3.3.1.3 | Integer32 (0..100) | RW | ||||||||||
scalar · Integer32 (0..100) · read-write · current Maximum video bandwidth to be used for re-association. | |||||||||||||
| SmaxVideoBWforAssociation | 1.3.6.1.4.1.4329.15.3.3.3.1.4 | Integer32 (0..100) | RW | ||||||||||
scalar · Integer32 (0..100) · read-write · current Maximum video bandwidth to be used for association. | |||||||||||||
| SmaxBestEffortBWforReassociation | 1.3.6.1.4.1.4329.15.3.3.3.1.5 | Integer32 (0..100) | RW | ||||||||||
scalar · Integer32 (0..100) · read-write · current Maximum best effort bandwidth to be used for reassociation. | |||||||||||||
| SmaxBestEffortBWforAssociation | 1.3.6.1.4.1.4329.15.3.3.3.1.6 | Integer32 (0..100) | RW | ||||||||||
scalar · Integer32 (0..100) · read-write · current Maximum best effort bandwidth to be used for association. | |||||||||||||
| SmaxBackgroundBWforReassociation | 1.3.6.1.4.1.4329.15.3.3.3.1.7 | Integer32 (0..100) | RW | ||||||||||
scalar · Integer32 (0..100) · read-write · current Maximum background bandwidth to be used for reassociation. | |||||||||||||
| SmaxBackgroundBWforAssociation | 1.3.6.1.4.1.4329.15.3.3.3.1.8 | Integer32 (0..100) | RW | ||||||||||
scalar · Integer32 (0..100) · read-write · current Maximum background bandwidth to be used for association. | |||||||||||||
| NradiusInfo | 1.3.6.1.4.1.4329.15.3.3.3.2 | ||||||||||||
| TexternalRadiusServerTable | 1.3.6.1.4.1.4329.15.3.3.3.2.2 | NA | obsolete | ||||||||||
table · not-accessible · obsolete Table of external RADIUS servers available for authentication services. | |||||||||||||
| RexternalRadiusServerEntry | 1.3.6.1.4.1.4329.15.3.3.3.2.2.1 | NA | obsolete | ||||||||||
row · not-accessible · obsolete Configuration information about the RADIUS server entry. | |||||||||||||
| CexternalRadiusServerName | 1.3.6.1.4.1.4329.15.3.3.3.2.2.1.1 | DisplayString | RW | obsolete | |||||||||
column · DisplayString · read-write · obsolete RADIUS server name. | |||||||||||||
| CexternalRadiusServerAddress | 1.3.6.1.4.1.4329.15.3.3.3.2.2.1.2 | DisplayString | RW | obsolete | |||||||||
column · DisplayString · read-write · obsolete RADIUS server address, it can be either string or IP address. | |||||||||||||
| CexternalRadiusServerSharedSecret | 1.3.6.1.4.1.4329.15.3.3.3.2.2.1.3 | OCTET STRING (SIZE (0..64)) | RW | obsolete | |||||||||
column · OCTET STRING (SIZE (0..64)) · read-write · obsolete Shared secret between Radius and the client. | |||||||||||||
| CexternalRadiusServerRowStatus | 1.3.6.1.4.1.4329.15.3.3.3.2.2.1.4 | RowStatus | RW | obsolete | |||||||||
column · RowStatus · read-write · obsolete Row Status for the entry. | |||||||||||||
| NdasInfo | 1.3.6.1.4.1.4329.15.3.3.3.3 | ||||||||||||
| SdasPort | 1.3.6.1.4.1.4329.15.3.3.3.3.1 | Integer32 (1024..65535) | RW | ||||||||||
scalar · Integer32 (1024..65535) · read-write · current Dynamic Authorization Server (DAS) port. | |||||||||||||
| SdasReplayInterval | 1.3.6.1.4.1.4329.15.3.3.3.3.2 | Integer32 (0..1000) | RW | ||||||||||
scalar · Integer32 (0..1000) · read-write · current The time window for message timeliness and replay protection for DAS packets. Packets should be dropped that their time generation is outside of this specified interval. Value zero indicates that the timeliness checking will be performed.
| |||||||||||||
| SadvancedFilteringMode | 1.3.6.1.4.1.4329.15.3.3.3.4 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Value of 'enabled(1)' means EWC is operating in advanced filtering configuration mode. Value of 'disabled(0)' means EWC is operating in mode that is compatible with releases prior to 7.41. This field can only be set to 'enabled(1)' and after setting it to that value, the only way to undo that is by resetting the database.
| |||||||||||||
| SradiusStrictMode | 1.3.6.1.4.1.4329.15.3.3.3.5 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current If this variable set to true, then assignment of RADIUS server(s) to WLAN are automatic during WLAN creation, otherwise, assignment of RADIUS server(s) to WLAN must be done manually.
| |||||||||||||
| NradiusFastFailoverEvents | 1.3.6.1.4.1.4329.15.3.3.3.6 | ||||||||||||
| TradiusFastFailoverEventsTable | 1.3.6.1.4.1.4329.15.3.3.3.6.1 | NA | |||||||||||
table · not-accessible · current Table in which to configure which RADIUS servers will be sent interim accounting reports for stations when a fast failover incident occurs | |||||||||||||
| RradiusFastFailoverEventsEntry | 1.3.6.1.4.1.4329.15.3.3.3.6.1.1 | NA | |||||||||||
| CradiusFFOEid | 1.3.6.1.4.1.4329.15.3.3.3.6.1.1.1 | DisplayString (SIZE (1..64)) | NA | ||||||||||
column · DisplayString (SIZE (1..64)) · not-accessible · current The IP address or hostname of configured radius server. If the hostname is created from GUI/CLI and the size is bigger than 64 characters, snmp will display the first 64 characters only. | |||||||||||||
| CfastFailoverEvents | 1.3.6.1.4.1.4329.15.3.3.3.6.1.1.2 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current If true, send an interim accounting record to the RADIUS server for each affected station when a fast failover event occurs. This field can be modified when controller is operated in availablity paired mode and fast failover is enabled
| |||||||||||||
| NdhcpRelayListeners | 1.3.6.1.4.1.4329.15.3.3.3.7 | ||||||||||||
| SdhcpRelayListenersMaxEntries | 1.3.6.1.4.1.4329.15.3.3.3.7.1 | Unsigned32 | RO | ||||||||||
scalar · Unsigned32 · read-only · current Maximum number of servers to which DHCP messages are relayed . | |||||||||||||
| SdhcpRelayListenersNumEntries | 1.3.6.1.4.1.4329.15.3.3.3.7.2 | Unsigned32 | RO | ||||||||||
scalar · Unsigned32 · read-only · current The current number of entries in the dhcpRelayListenersTable. | |||||||||||||
| SdhcpRelayListenersNextIndex | 1.3.6.1.4.1.4329.15.3.3.3.7.3 | Integer32 | RO | ||||||||||
scalar · Integer32 · read-only · current This object indicates numerically lowest available index within this entity, which may be used for the value of index in the creation of new entry in dhcpRelayListenersTable. An index is considered available if the index falls within the range of 1 to dhcpRelayListenersMaxEntries and it is not being used to index an existing entry in the dhcpRelayListenersTable contained this entity. This value should only be used as guideline for the management application and there is no requirement on the management application to create entries based upon this index value. Value of zero indicates there is no more room for new dhcpRelayListenersTable creation. | |||||||||||||
| TdhcpRelayListenersTable | 1.3.6.1.4.1.4329.15.3.3.3.7.4 | NA | |||||||||||
table · not-accessible · current A list of servers to which DHCP messages are relayed but from which no responses are expected. | |||||||||||||
| RdhcpRelayListenersEntry | 1.3.6.1.4.1.4329.15.3.3.3.7.4.1 | NA | |||||||||||
| CdhcpRelayListenersID | 1.3.6.1.4.1.4329.15.3.3.3.7.4.1.1 | Unsigned32 | NA | ||||||||||
column · Unsigned32 · not-accessible · current The id corresponds to the 'server number' in the controller GUI and CLI. | |||||||||||||
| CdhcpRelayListenersRowStatus | 1.3.6.1.4.1.4329.15.3.3.3.7.4.1.2 | RowStatus | RC | ||||||||||
column · RowStatus · read-create · current This object allows dynamic creation and deletion of entries within dhcpRelayListenersTable as well as activation and deactivation of these entries. For row creation, EWC only supports creatAndWait. | |||||||||||||
| CdestinationName | 1.3.6.1.4.1.4329.15.3.3.3.7.4.1.3 | DisplayString | RW | ||||||||||
column · DisplayString · read-write · current Text string uniquely identifying NAC Server Name. Allowable characters for this field are from the set of A-Z, a-z, -_!#$, 0-9, and space. max len is 63 chars Howerver, it is recommended to avoid leading and trailing spaces. | |||||||||||||
| CdestinationIP | 1.3.6.1.4.1.4329.15.3.3.3.7.4.1.4 | IpAddress | RW | ||||||||||
column · IpAddress · read-write · current IPv4 address to which DHCP messages are relayed. | |||||||||||||
| SclientAutologinOption | 1.3.6.1.4.1.4329.15.3.3.3.8 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Many devices such as those made by Apple(R) implement an autologin feature that prompts the user
to login as soon as the device detects the presence of a Captive Portal. This feature sometimes
causes problems for users who actually interact with the captive portal.
hide(0) - Hide the captive portal from Autologin detector.
redirect(1) - Redirect detection messages to the Captive Portal. This option is to allow client autologin
to detect the captive portal & prompt the user to login. This may cause post-authentication
redirection to fail.
drop(2) - Drop detection messages.
| |||||||||||||
| NauthenticationAdvanced | 1.3.6.1.4.1.4329.15.3.3.3.9 | ||||||||||||
| SincludeServiceType | 1.3.6.1.4.1.4329.15.3.3.3.9.1 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Include the Service-Type attribute in client access request messages when this field is set to enable(1).
| |||||||||||||
| SclientMessageDelayTime | 1.3.6.1.4.1.4329.15.3.3.3.9.2 | Integer32 | RW | ||||||||||
scalar · Integer32 · read-write · current This field specifies how long, in seconds, the notice Web page is displayed to the client when the topology changes as a result of a role change. The notice Web page indicates that authentication was successful and that the user must close all browser windows and then restart the browser for access to the network. Currently this is supported for Internal Captive Portal, Guest Portal, and Guest Splash. | |||||||||||||
| SradiusAccounting | 1.3.6.1.4.1.4329.15.3.3.3.9.3 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current This field enables or disables RADIUS accounting. Disabling RADIUS accounting overrides the RADIUS accounting settings of individual WLAN Services. Enabling RADIUS accounting activates RADIUS accounting only in WLAN Services specifically configured to perform it.
| |||||||||||||
| SserverUsageModel | 1.3.6.1.4.1.4329.15.3.3.3.9.4 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current This field specifies RADIUS server failover behavior when the primary server goes down. When the primary server is down the controller moves on to the secondary or tertiary configured RADIUS Servers. If this field is set to primaryBackup(1), then the controller starts polling the primary RADIUS server to see if it is up. When the primary RADIUS server comes back, the controller automatically starts sending new access requests to the primary RADIUS server but pending requests continue with backup RADIUS server. The administrator can select between the two strategies, i.e. the existing roundRobin(0) or new primaryBackup(1). This only applies to Authentication, not to Accounting.
| |||||||||||||
| SradacctStartOnIPAddr | 1.3.6.1.4.1.4329.15.3.3.3.9.5 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current When this OID is set to disabled (0) the controller sends a RADIUS accounting start message as soon as it receives an Access-Accept for the user from a RADIUS server. When this OID is set to enabled(1) the controller defers sending the RADIUS accounting start message until an Access-Accept for the client is received and the client's IP address is known.
| |||||||||||||
| SclientServiceTypeLogin | 1.3.6.1.4.1.4329.15.3.3.3.9.6 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current When this OID is set to enabled(1) the controller sets the Service-Type attribute of a station's Access-Request to 'Login'. When this OID is set to disabled(0) the controller sets the Service-Type attribute of a station's Access-Request to 'Framed'. By default this OID is set to 'disabled'. You cannot use RADIUS servers to authenticate administrators for local server access when this OID is set to 'enabled'.
| |||||||||||||
| SapplyMacAddressFormat | 1.3.6.1.4.1.4329.15.3.3.3.9.7 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current When this OID is set to enabled(1), the controller uses MAC-Based Authentication MAC address format (refer to radiusMacAddressFormatOption) for user authentication and accounting via RADIUS.
| |||||||||||||
| NradiusExtnsSetting | 1.3.6.1.4.1.4329.15.3.3.3.10 | ||||||||||||
| TradiusExtnsSettingTable | 1.3.6.1.4.1.4329.15.3.3.3.10.1 | NA | |||||||||||
table · not-accessible · current List of RADIUS servers that will be used. | |||||||||||||
| RradiusExtnsSettingEntry | 1.3.6.1.4.1.4329.15.3.3.3.10.1.1 | NA | |||||||||||
| CradiusExtnsIndex | 1.3.6.1.4.1.4329.15.3.3.3.10.1.1.1 | Integer32 (1..2147483647) | NA | ||||||||||
column · Integer32 (1..2147483647) · not-accessible · current A number uniquely identifying each conceptual row in the radiusExtnsSettingTable. This value also equivalent to etsysRadiusAuthServerIndex of enterasys-radius-auth-client-mib.txt file. | |||||||||||||
| CpollingMechanism | 1.3.6.1.4.1.4329.15.3.3.3.10.1.1.2 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current This field specifies the method to determine the health of the RADIUS server. If set to useRFC5997StatusServerRequest(1), RFC 5997 Status-Server packets will be sent to the primary server to determine it's health. If set to authorizeAsActualUser(0), access-request messages for a specified user account will be sent to the primary server to determine it's health.
| |||||||||||||
| CserverPollingInterval | 1.3.6.1.4.1.4329.15.3.3.3.10.1.1.3 | Integer32 | RW | ||||||||||
column · Integer32 · read-write · current Interval in seconds for the controller to poll the primary server. | |||||||||||||
| NnetflowAndMirrorN | 1.3.6.1.4.1.4329.15.3.3.3.11 | ||||||||||||
| SnetflowDestinationIP | 1.3.6.1.4.1.4329.15.3.3.3.11.1 | IpAddress | RW | ||||||||||
scalar · IpAddress · read-write · current The IP address for the Purview engine that will receive netflow records. | |||||||||||||
| SnetflowInterval | 1.3.6.1.4.1.4329.15.3.3.3.11.2 | Integer32 (30..360) | RW | ||||||||||
scalar · Integer32 (30..360) · read-write · current The netflow record sending interval. | |||||||||||||
| SmirrorFirstN | 1.3.6.1.4.1.4329.15.3.3.3.11.3 | Integer32 | RW | ||||||||||
scalar · Integer32 · read-write · current If non-zero, the first N packets of a particular flow will be mirrored. If 0, all packets will be mirrored. | |||||||||||||
| SmirrorL2Ports | 1.3.6.1.4.1.4329.15.3.3.3.11.4 | OCTET STRING | RW | ||||||||||
scalar · OCTET STRING · read-write · current Configure the mirror port(s) on the controller. The default value is None. Only l2ports will be allowed to be selected and only when not referred to elsewhere (lag, topologies). The most significant bit of the most significant octet represents the first esa port (esa0). The second most significant bit of the most significant octet represents the second esa port (esa1) and so on. | |||||||||||||
| SradiusMacAddressFormatOption | 1.3.6.1.4.1.4329.15.3.3.3.12 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current The controller allows configuring different kinds of Mac address format in RADIUS messages. option1: mac address format as XXXXXXXXXXXX option2: mac address format as XX:XX:XX:XX:XX:XX option3: mac address format as XX-XX-XX-XX-XX-XX option4: mac address format as XXXX.XXXX.XXXX option5: mac address format as XXXXXX-XXXXXX option6: mac address format as XX XX XX XX XX XX option7: mac address format as xxxxxxxxxxxx option8: mac address format as xx:xx:xx:xx:xx:xx option9: mac address format as xx-xx-xx-xx-xx-xx option10: mac address format as xxxx.xxxx.xxxx option11: mac address format as xxxxxx-xxxxxx option12: mac address format as xx xx xx xx xx xx
| |||||||||||||
| Nwlan | 1.3.6.1.4.1.4329.15.3.3.4 | ||||||||||||
| SwlanMaxEntries | 1.3.6.1.4.1.4329.15.3.3.4.1 | Unsigned32 | RO | ||||||||||
scalar · Unsigned32 · read-only · current Maximum number of WLAN supported by the device. | |||||||||||||
| SwlanNumEntries | 1.3.6.1.4.1.4329.15.3.3.4.2 | Unsigned32 | RO | ||||||||||
scalar · Unsigned32 · read-only · current The current number of entries in the wlanTable. | |||||||||||||
| SwlanTableNextAvailableIndex | 1.3.6.1.4.1.4329.15.3.3.4.3 | Integer32 | RO | ||||||||||
scalar · Integer32 · read-only · current This object indicates numerically lowest available index within this entity, which may be used for the value of index in the creation of new entry in wlanTable. An index is considered available if the index falls within the range of 1 to wlanMaxEntries and it is not being used to index an existing entry in the wlanTable contained this entity. This value should only be used as guideline for the management application and there is no requirement on the management application to create entries based upon this index value. Value of zero indicates there is no more room for new wlanTable creation. | |||||||||||||
| TwlanTable | 1.3.6.1.4.1.4329.15.3.3.4.4 | NA | |||||||||||
table · not-accessible · current Table of configured WLAN. | |||||||||||||
| RwlanEntry | 1.3.6.1.4.1.4329.15.3.3.4.4.1 | NA | |||||||||||
| CwlanID | 1.3.6.1.4.1.4329.15.3.3.4.4.1.1 | Unsigned32 | RO | ||||||||||
column · Unsigned32 · read-only · current Unique internal ID associated with WLAN. | |||||||||||||
| CwlanRowStatus | 1.3.6.1.4.1.4329.15.3.3.4.4.1.2 | RowStatus | RW | ||||||||||
column · RowStatus · read-write · current This object allows dynamic creation and deletion of entries within wlanTable as well as activation and deactivation of these entries. For row creation, EWC only supports creatAndWait. WLAN name must be set before making the row active and persistent. Any WLAN that is associated to a VNS cannot be deleted unless it is first disassociated from VNS before being deleted. Any inactive entry will not be persistent and it will be lost during controller's restart. | |||||||||||||
| CwlanServiceType | 1.3.6.1.4.1.4329.15.3.3.4.4.1.3 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Service type of WLAN.
| |||||||||||||
| CwlanName | 1.3.6.1.4.1.4329.15.3.3.4.4.1.4 | DisplayString | RW | Test VNS | |||||||||
column · DisplayString · read-write · current Text string uniquely identifying WLAN within EWC. Allowable characters for this field are from the set of A-Z, a-z, -!#$:, 0-9, and space. Howerver, it is recommended to avoid leading and trailing spaces. Example values from LibreNMS test devices
| |||||||||||||
| CwlanSSID | 1.3.6.1.4.1.4329.15.3.3.4.4.1.5 | DisplayString (SIZE (1..32)) | RW | ||||||||||
column · DisplayString (SIZE (1..32)) · read-write · current SSID (broadcast string) associated with WLAN. Allowable characters for this field are from the set of A-Z, a-z, _-.@, 0-9, and space. Howerver, it is recommendedto avoid leading and trailing spaces. | |||||||||||||
| CwlanSynchronize | 1.3.6.1.4.1.4329.15.3.3.4.4.1.6 | TruthValue | RW | ||||||||||
column · TruthValue · read-write · current If it is set to true, then WLAN will be replicated to peer controller if availability is configured and enabled. | |||||||||||||
| CwlanEnabled | 1.3.6.1.4.1.4329.15.3.3.4.4.1.7 | TruthValue | RW | ||||||||||
column · TruthValue · read-write · current This field is used to enable or disable this WLAN. If WLAN is disabled, then no traffic will be passed on behalf of this WLAN. | |||||||||||||
| CwlanDefaultTopologyID | 1.3.6.1.4.1.4329.15.3.3.4.4.1.8 | INTEGER (-1 | 0..65535) | RW | ||||||||||
column · INTEGER (-1 | 0..65535) · read-write · current The ID of topology from topologyTable associated to this WLAN. Topology ID of -1 means no default topology is associated to this WLAN. Physical topologies cannot be assigned to WLAN. The default topology indicates which topology to use for this WLAN if there is no topology associated with VNS via policy assignment. | |||||||||||||
| CwlanSessionTimeout | 1.3.6.1.4.1.4329.15.3.3.4.4.1.9 | Unsigned32 | RW | ||||||||||
column · Unsigned32 · read-write · current MU session that is associated to this WLAN will be terminated after elapse of this number of minutes from the start of its current session.
| |||||||||||||
| CwlanIdleTimeoutPreAuth | 1.3.6.1.4.1.4329.15.3.3.4.4.1.10 | Unsigned32 | RW | ||||||||||
column · Unsigned32 · read-write · current Elapse time between association and authentication after which MU session will be terminated if the user is idle this amount of time without being authenticated.
| |||||||||||||
| CwlanIdleSessionPostAuth | 1.3.6.1.4.1.4329.15.3.3.4.4.1.11 | Unsigned32 | RW | ||||||||||
column · Unsigned32 · read-write · current MU session that is associated to this WLAN will be terminated if the user is idle this amount of time after being authenticated.
| |||||||||||||
| CwlanSupressSSID | 1.3.6.1.4.1.4329.15.3.3.4.4.1.12 | TruthValue | RW | ||||||||||
column · TruthValue · read-write · current If it is set to true then broadcast string (SSID) for this WLAN will not be broadcasted over the air. | |||||||||||||
| CwlanDot11hSupport | 1.3.6.1.4.1.4329.15.3.3.4.4.1.13 | TruthValue | RW | ||||||||||
column · TruthValue · read-write · current If it is set to true then dot11h support is enabled for clients associated to this WLAN. | |||||||||||||
| CwlanDot11hClientPowerReduction | 1.3.6.1.4.1.4329.15.3.3.4.4.1.14 | TruthValue | RW | ||||||||||
column · TruthValue · read-write · current If it is set to true then apply power reduction to dot11h clients associated to this WLAN. This field has meaning if wlanDot11hSupport is enabled (set to true). | |||||||||||||
| CwlanProcessClientIE | 1.3.6.1.4.1.4329.15.3.3.4.4.1.15 | TruthValue | RW | ||||||||||
column · TruthValue · read-write · current If it is set to true then clients that are associated to this WLAN their IE requests will be processed. | |||||||||||||
| CwlanEngerySaveMode | 1.3.6.1.4.1.4329.15.3.3.4.4.1.16 | TruthValue | RW | ||||||||||
column · TruthValue · read-write · current If it is set to true then engergy saving mode is enabled. | |||||||||||||
| CwlanBlockMuToMuTraffic | 1.3.6.1.4.1.4329.15.3.3.4.4.1.17 | TruthValue | RW | ||||||||||
column · TruthValue · read-write · current If it is set to true then two MU associated to this WLAN cannot communicate with each other. | |||||||||||||
| CwlanRemoteable | 1.3.6.1.4.1.4329.15.3.3.4.4.1.18 | TruthValue | RW | ||||||||||
column · TruthValue · read-write · current If it is set to true then this WLAN can be used as remote WLAN within mobility zone that this controller is partaking. | |||||||||||||
| CwlanVNSID | 1.3.6.1.4.1.4329.15.3.3.4.4.1.19 | Unsigned32 | RO | ||||||||||
column · Unsigned32 · read-only · current The ID of the VNS that uses this WLAN. WLAN can be created but not used in any VNS, in that case alue of zero indicates WLAN has not been used in any VNS. The value of this field set during VNS creation no during the WLAN creation. | |||||||||||||
| CwlanRadioManagement11k | 1.3.6.1.4.1.4329.15.3.3.4.4.1.20 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current When this bit is set to enable, the Radio Management (802.11k) feature is enabled on those APs who have this wlan configuration and 802.11k capability.
| |||||||||||||
| CwlanBeaconReport | 1.3.6.1.4.1.4329.15.3.3.4.4.1.21 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Enable/disable AP to send out beacon report. This field is configurable only if wlanRadioManagement11k is set to enable(1).
| |||||||||||||
| CwlanQuietIE | 1.3.6.1.4.1.4329.15.3.3.4.4.1.22 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Enable/disable AP to advertise a Quiet Element. This field is configurable only if wlanRadioManagement11k is set to enable(1).
| |||||||||||||
| CwlanMirrorN | 1.3.6.1.4.1.4329.15.3.3.4.4.1.23 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current prohibited(0): Mirroring is prohibited. bothDirection(1) : Both direction packets will be mirrored. rxDirectionOnly(2): Only receive direction packets will be mirrored. Note: This will only take effect when the user's runtime current Roles's MirrorN action is None.
| |||||||||||||
| CwlanNetFlow | 1.3.6.1.4.1.4329.15.3.3.4.4.1.24 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Enable/disable netflow on this WLAN service.
| |||||||||||||
| CwlanAppVisibility | 1.3.6.1.4.1.4329.15.3.3.4.4.1.25 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Enable/disable both application visibility and control for this WLAN service.
| |||||||||||||
| TwlanStatsTable | 1.3.6.1.4.1.4329.15.3.3.4.5 | NA | |||||||||||
table · not-accessible · current Stats related to WLAN (RFS) created on EWC. | |||||||||||||
| RwlanStatsEntry | 1.3.6.1.4.1.4329.15.3.3.4.5.1 | NA | |||||||||||
| CwlanStatsID | 1.3.6.1.4.1.4329.15.3.3.4.5.1.1 | Unsigned32 | RO | ||||||||||
column · Unsigned32 · read-only · current Unique internal ID associated with WLAN. | |||||||||||||
| CwlanStatsAssociatedClients | 1.3.6.1.4.1.4329.15.3.3.4.5.1.2 | Counter32 | RO | 10 | |||||||||
column · Counter32 · read-only · current Number of clients that are currently associated to this WLAN. Example values from LibreNMS test devices
| |||||||||||||
| CwlanStatsRadiusTotRequests | 1.3.6.1.4.1.4329.15.3.3.4.5.1.3 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current Number of requests that were sent to RADIUS servers associated to this WLAN on behalf of MUs' requests using SSID associated to the WLAN for association, authentication or authorization to this WLAN. | |||||||||||||
| CwlanStatsRadiusReqFailed | 1.3.6.1.4.1.4329.15.3.3.4.5.1.4 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current Number of requests that were sent to RADIUS servers associated to this WLAN on behalf of MUs' requests for association, authentication or authorization to this WLAN but failed to be processed by RADIUS servers. | |||||||||||||
| CwlanStatsRadiusReqRejected | 1.3.6.1.4.1.4329.15.3.3.4.5.1.5 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current Number of requests that were sent to RADIUS servers associated to this WLAN on behalf of MUs' requests for association, authentication or authorization to this WLAN but rejected to be processed by RADIUS servers. | |||||||||||||
| TwlanPrivTable | 1.3.6.1.4.1.4329.15.3.3.4.6 | NA | |||||||||||
table · not-accessible · current This table contains configuration of privacy settings for all configured WLAN on EWC. For each of the configured WLAN on the controller one entry is added to this table. Addition/deletion of entries in this table are automatic depending on the addition or deletion of entries in wlanTable table. | |||||||||||||
| RwlanPrivEntry | 1.3.6.1.4.1.4329.15.3.3.4.6.1 | NA | |||||||||||
row · not-accessible · current An entry in wlanPrivTable for each configured WLAN on EWC. Each entry is indexed with corresponding wlan ID of wlanTable. The writable fields in this table can be modified depending on the corresponding wlanTable.
| |||||||||||||
| CwlanPrivPrivacyType | 1.3.6.1.4.1.4329.15.3.3.4.6.1.1 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Type of privacy applied to the corresponding configured WLAN. Configuration of the other fields in this table depends on the value of this field, e.g. if this field is set to none(0), then no other field in this table are settable.
| |||||||||||||
| CwlanPrivWEPKeyIndex | 1.3.6.1.4.1.4329.15.3.3.4.6.1.2 | INTEGER (1..4) | RW | ||||||||||
column · INTEGER (1..4) · read-write · current Index of configured WEP. This field is required if and only if privacy type is staticWEP(1). | |||||||||||||
| CwlanPrivWEPKeyLength | 1.3.6.1.4.1.4329.15.3.3.4.6.1.3 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Key legnth for the configured WEP key. This field is required if and only if privacy type is staticWEP(1).
| |||||||||||||
| CwlanPrivWEPKey | 1.3.6.1.4.1.4329.15.3.3.4.6.1.4 | DisplayString (SIZE (8..19)) | RW | ||||||||||
column · DisplayString (SIZE (8..19)) · read-write · current The configured WEP key length must match the wlanPrivWEPKeyLength field. Any key with length longer or shorter than that length will be rejected. This field is required if and only if privacy type is staticWEP(1). This key can only be viewed in SNMPv3 mode with privacy. | |||||||||||||
| CwlanPrivWPAv1EncryptionType | 1.3.6.1.4.1.4329.15.3.3.4.6.1.5 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current The type of encryption used for WPA version 1 associations. This OID is undefined unless wlanPrivPrivacyType is wpa (3) or wpaPSK (4) and wlanPrivWPAversion is set to wpaV1 (1) or wpaV1andV2 (3).
| |||||||||||||
| CwlanPrivWPAv2EncryptionType | 1.3.6.1.4.1.4329.15.3.3.4.6.1.6 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current The type of encryption used for WPA version 2 associations. This OID is undefined unless wlanPrivPrivacyType is wpa (3) or wpaPSK (4) and wlanPrivWPAversion is set to wpaV2 (2) or wpaV1 and V2 (3).
| |||||||||||||
| CwlanPrivKeyManagement | 1.3.6.1.4.1.4329.15.3.3.4.6.1.7 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Key management option available for the WPA2. This field has meaning if privacy type is WPA with WPA2 option enabled. This field can be modified only if wlanPrivPrivacyType is set to wpa(3) and wlanPrivWPAversion set to wpaV2(2) or wpaV1andV2(3). .
| |||||||||||||
| CwlanPrivBroadcastRekeying | 1.3.6.1.4.1.4329.15.3.3.4.6.1.8 | TruthValue | RW | ||||||||||
column · TruthValue · read-write · current Broadcast rekeying if this value is set to true. This field can be modified only if wlanPrivPrivacyType is set to wpa(3) or wpaPSK(4). | |||||||||||||
| CwlanPrivRekeyInterval | 1.3.6.1.4.1.4329.15.3.3.4.6.1.9 | Unsigned32 (30..86400) | RW | ||||||||||
column · Unsigned32 (30..86400) · read-write · current Interval in seconds for requesting rekeying. This field has meaning if privacy type is WPA and broadcast rekeying is enabled (wlanPrivBroadcastRekeying is set to true). This field can be modified only if wlanPrivBroadcastRekeying is set to true.
| |||||||||||||
| CwlanPrivGroupKPSR | 1.3.6.1.4.1.4329.15.3.3.4.6.1.10 | TruthValue | RW | ||||||||||
column · TruthValue · read-write · current Group Key Power Save Retry (GKPSR) value for the WPA type of privacy. This field can be modified only if wlanPrivPrivacyType is set to wpa(3) or wpaPSK(4). | |||||||||||||
| CwlanPrivWPAPSK | 1.3.6.1.4.1.4329.15.3.3.4.6.1.11 | OCTET STRING (SIZE (8..63)) | RW | ||||||||||
column · OCTET STRING (SIZE (8..63)) · read-write · current WPA-PSK shared key. This field has meaning if and only if WLAN privacy type is set to WPA-PSK. Input type can be either HEX formatted string or ASCII string. In case of HEX string, it must be 64 octets from set of hex characters. In case of ASCII string, the length is limited between 8 to 63 octets. This key can only be viewed in SNMPv3 mode with privacy. This field can be modified only if wlanPrivPrivacyType is set to wpaPSK(4). | |||||||||||||
| CwlanPrivWPAversion | 1.3.6.1.4.1.4329.15.3.3.4.6.1.12 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Type of wpa version selected. This field can be modified only if wlanPrivPrivacyType is set to wpa(3) or wpaPSK(4). Note: wpa version v1 only is not allowed. 0 - no wpa version selected. 1 - wpa version v1 selected. 2 - wpa version v2 selected. 3 - both wpa version v1 and v2 selected.
| |||||||||||||
| CwlanPrivfastTransition | 1.3.6.1.4.1.4329.15.3.3.4.6.1.13 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current When this field is set to enable(1), the 802.11r (fast transition) is enabled. This field can be modified only if wlanPrivPrivacyType is set to wpa(2).
| |||||||||||||
| CwlanPrivManagementFrameProtection | 1.3.6.1.4.1.4329.15.3.3.4.6.1.14 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Disable(0) : The AP will not encrypt any management frames.
Enable(1): The AP will encrypt management frames for clients who also support
this feature. If the clients do not support this feature, they are still able to
connect to the AP but with no management frames encryption.
Require(2): The AP will only allow clients who have the PMF feature to connect. Supported
management frames will be encrypted to 802.11w standards. Clients who
do not support this feature will not be able to associate.
| |||||||||||||
| TwlanAuthTable | 1.3.6.1.4.1.4329.15.3.3.4.7 | NA | |||||||||||
table · not-accessible · current This table contains configuration of authentication settings for all configured WLAN on EWC. For each of the configured WLAN on the controller one entry is added to this table. Addition/deletion of entries in this table are automatic depending on the addition/deletion of entries in wlanTable table. | |||||||||||||
| RwlanAuthEntry | 1.3.6.1.4.1.4329.15.3.3.4.7.1 | NA | |||||||||||
row · not-accessible · current An entry in wlanAuthTable for each configured WLAN on EWC. Each entry is indexed with corresponding wlan ID of wlanTable. The writable fields in this table can be modified depending on the corresponding wlanTable. Note: All the fields in this table except wlanAuthType and wlanAuthCollectAcctInformation have meaning if MAC-based authentication filed (wlanAuthMacBasedAuth) is set to true.
| |||||||||||||
| CwlanAuthType | 1.3.6.1.4.1.4329.15.3.3.4.7.1.1 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current The type of authentication applied to stations attempting to associate to a BSSID belonging to this WLAN Service. If the dot1x type is selected, then this WLAN must have privacy. When the dot1x or internalCP is selected, the controller must have a RADIUS server, and SNMP will auto assign one RADIUS server to this WLAN if the user did not assign one.
| |||||||||||||
| CwlanAuthMacBasedAuth | 1.3.6.1.4.1.4329.15.3.3.4.7.1.2 | TruthValue | RW | ||||||||||
column · TruthValue · read-write · current MAC based authorization is enabled if this field is set to true. When this field set to true, SNMP will auto configure one RADIUS server to enable MAC authorization. | |||||||||||||
| CwlanAuthMACBasedAuthOnRoam | 1.3.6.1.4.1.4329.15.3.3.4.7.1.3 | TruthValue | RW | ||||||||||
column · TruthValue · read-write · current If it is set to true, the client will be forced to go through MAC based authorization when the client roamed. This field has meaning only when wlanAuthMacBasedAuth is set to true. This field can be modified only when wlanAuthMacBasedAuth is set to true. | |||||||||||||
| CwlanAuthAutoAuthAuthorizedUser | 1.3.6.1.4.1.4329.15.3.3.4.7.1.4 | TruthValue | RW | ||||||||||
column · TruthValue · read-write · current All authorized users will be considered authenticated automatically. This field has meaning only when wlanAuthMacBasedAuth is set to true. This field can be modified only when wlanAuthMacBasedAuth is set to true. | |||||||||||||
| CwlanAuthAllowUnauthorizedUser | 1.3.6.1.4.1.4329.15.3.3.4.7.1.5 | TruthValue | RW | ||||||||||
column · TruthValue · read-write · current Unauthorized users will be allowed if this field is set to true.This field has meaning only when wlanAuthMacBasedAuth is set to true. This field can be modified only when wlanAuthMacBasedAuth is set to true. | |||||||||||||
| CwlanAuthRadiusIncludeAP | 1.3.6.1.4.1.4329.15.3.3.4.7.1.6 | TruthValue | RW | ||||||||||
column · TruthValue · read-write · current AP serial number will be included in RADIUS request packet as VSA if this field is set to true. | |||||||||||||
| CwlanAuthRadiusIncludeVNS | 1.3.6.1.4.1.4329.15.3.3.4.7.1.7 | TruthValue | RW | ||||||||||
column · TruthValue · read-write · current VNS name will be included in RADIUS request packet as VSA if this field is set to true. | |||||||||||||
| CwlanAuthRadiusIncludeSSID | 1.3.6.1.4.1.4329.15.3.3.4.7.1.8 | TruthValue | RW | ||||||||||
column · TruthValue · read-write · current WLAN SSID will be included in RADIUS request packet as VSA if this field is set to true. | |||||||||||||
| CwlanAuthRadiusIncludePolicy | 1.3.6.1.4.1.4329.15.3.3.4.7.1.9 | TruthValue | RW | ||||||||||
column · TruthValue · read-write · current Policy name will be included in RADIUS request packet as VSA if this field is set to true. | |||||||||||||
| CwlanAuthRadiusIncludeTopology | 1.3.6.1.4.1.4329.15.3.3.4.7.1.10 | TruthValue | RW | ||||||||||
column · TruthValue · read-write · current Topology name will be included in RADIUS request packet as VSA if this field is set to true. | |||||||||||||
| CwlanAuthRadiusIncludeIngressRC | 1.3.6.1.4.1.4329.15.3.3.4.7.1.11 | TruthValue | RW | ||||||||||
column · TruthValue · read-write · current Ingress rate control name will be included in RADIUS request packet as VSA if this field is set to true. | |||||||||||||
| CwlanAuthRadiusIncludeEgressRC | 1.3.6.1.4.1.4329.15.3.3.4.7.1.12 | TruthValue | RW | ||||||||||
column · TruthValue · read-write · current Egress rate control name will be included in RADIUS request packet as VSA if this field is set to true. | |||||||||||||
| CwlanAuthCollectAcctInformation | 1.3.6.1.4.1.4329.15.3.3.4.7.1.13 | TruthValue | RW | ||||||||||
column · TruthValue · read-write · current Accounting information is collected for clients if this field is set to true. | |||||||||||||
| CwlanAuthReplaceCalledStationIDWithZone | 1.3.6.1.4.1.4329.15.3.3.4.7.1.14 | TruthValue | RW | ||||||||||
column · TruthValue · read-write · current Replace called station ID with Zone if this field is set to true. | |||||||||||||
| CwlanAuthRadiusAcctAfterMacBaseAuthorization | 1.3.6.1.4.1.4329.15.3.3.4.7.1.15 | TruthValue | RW | ||||||||||
column · TruthValue · read-write · current RADIUS accounting begins after MAC-based authorization completes if this field is set to true. This field has meaning only when wlanAuthMacBasedAuth is set to true. This field can be modified only when wlanAuthMacBasedAuth is set to true. | |||||||||||||
| CwlanAuthRadiusTimeoutRole | 1.3.6.1.4.1.4329.15.3.3.4.7.1.16 | Integer32 | RW | ||||||||||
column · Integer32 · read-write · current Apply this role to clients when the RADIUS server timed out. '-1' is treat like access reject. Any other number is the Role ID. This field has meaning only when wlanAuthMacBasedAuth is set to true. This field can be modified only when wlanAuthMacBasedAuth is set to true. | |||||||||||||
| CwlanAuthRadiusOperatorNameSpace | 1.3.6.1.4.1.4329.15.3.3.4.7.1.17 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current wlanAuthRadiusOperatorNameSpace is the Namespace ID as defined in RFC 5580. The value within this field contains the operator namespace identifier. The Namespace ID value is encoded in ASCII and has the following values. -1 : disabled. 48 : TADIG. 49 : REALM. 50 : E212. 51 : ICC.
| |||||||||||||
| CwlanAuthRadiusOperatorName | 1.3.6.1.4.1.4329.15.3.3.4.7.1.18 | DisplayString | RW | ||||||||||
column · DisplayString · read-write · current RADIUS accounting message will include this string when the wlanAuthRadiusOperatorNameSpace is not set to -1. | |||||||||||||
| CwlanAuthMACBasedAuthReAuthOnAreaRoam | 1.3.6.1.4.1.4329.15.3.3.4.7.1.19 | TruthValue | RW | ||||||||||
column · TruthValue · read-write · current If this field is set to true, the client will be forced to go through MAC based authorization when the client roams to another area. This field has meaning and can be modified only when wlanAuthMacBasedAuth is set to true. | |||||||||||||
| TwlanRadiusTable | 1.3.6.1.4.1.4329.15.3.3.4.8 | NA | |||||||||||
table · not-accessible · current This table contains configuration of RADIUS settings for all configured WLAN on EWC. For each of the configured WLAN on the controller there may exist one or more entries of RADIUS server(s) serving the WLAN. Addition/deletion of entries in this table are automatic depending on the addition/deletion of entries in wlanTable table. | |||||||||||||
| RwlanRadiusEntry | 1.3.6.1.4.1.4329.15.3.3.4.8.1 | NA | |||||||||||
row · not-accessible · current An entry in wlanRadiusTable for each RADIUS server used by the WLAN indexed by wlanID.
| |||||||||||||
| CwlanRadiusIndex | 1.3.6.1.4.1.4329.15.3.3.4.8.1.1 | Unsigned32 | NA | ||||||||||
column · Unsigned32 · not-accessible · current Internally generated index and it has no external meaning. | |||||||||||||
| CwlanRadiusName | 1.3.6.1.4.1.4329.15.3.3.4.8.1.2 | DisplayString | RW | ||||||||||
column · DisplayString · read-write · current Name of the RADIUS server associated to this entry. | |||||||||||||
| CwlanRadiusUsage | 1.3.6.1.4.1.4329.15.3.3.4.8.1.3 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Usage type associated to this entry for authentication.
| |||||||||||||
| CwlanRadiusPriority | 1.3.6.1.4.1.4329.15.3.3.4.8.1.4 | Integer32 | RW | ||||||||||
column · Integer32 · read-write · current Priority associated to this entry for authentication. RADIUS servers are contacted for authentication requests in the order of their priority defined in this field. The highest priority servers (priorities with lower numerical values have higher priority order) are consulted first for any authentication request. | |||||||||||||
| CwlanRadiusPort | 1.3.6.1.4.1.4329.15.3.3.4.8.1.5 | Unsigned32 | RW | ||||||||||
column · Unsigned32 · read-write · current The RADIUS authentication requests should be sent to this authentication port. | |||||||||||||
| CwlanRadiusRetries | 1.3.6.1.4.1.4329.15.3.3.4.8.1.6 | Unsigned32 (1..32) | RW | ||||||||||
column · Unsigned32 (1..32) · read-write · current Maximum number of retries attempted for an specific authentication request. | |||||||||||||
| CwlanRadiusTimeout | 1.3.6.1.4.1.4329.15.3.3.4.8.1.7 | Unsigned32 (1..360) | RW | ||||||||||
column · Unsigned32 (1..360) · read-write · current Number of seconds to wait for a response from authentication server for each request sent to the server before considering the request as failure.
| |||||||||||||
| CwlanRadiusNASUseVnsIP | 1.3.6.1.4.1.4329.15.3.3.4.8.1.8 | TruthValue | RW | ||||||||||
column · TruthValue · read-write · current If this value is set to true, then VNS IP address associated to the WLAN indexed by wlanID to this entry is used as NAS IP address. Otherwise NAS IP address should be configured manually. | |||||||||||||
| CwlanRadiusNASIP | 1.3.6.1.4.1.4329.15.3.3.4.8.1.9 | DisplayString | RW | ||||||||||
column · DisplayString · read-write · current NAS IP associated to this RADIUS server. Configuration of this field is directly affected by the value of wlanRadiusNASUseVnsIP. | |||||||||||||
| CwlanRadiusNASIDUseVNSName | 1.3.6.1.4.1.4329.15.3.3.4.8.1.10 | TruthValue | RW | ||||||||||
column · TruthValue · read-write · current If this value is set to true, then use VNS name associated to the WLAN indexed by wlanID for this entry as NAS ID. Otherwise NAS ID should be configured manually. | |||||||||||||
| CwlanRadiusNASID | 1.3.6.1.4.1.4329.15.3.3.4.8.1.11 | DisplayString | RW | ||||||||||
column · DisplayString · read-write · current NAS ID associated to this RADIUS server. Configuration of this field is directly affected by the value of wlanRadiusNASIDUseVNSName. | |||||||||||||
| CwlanRadiusAuthType | 1.3.6.1.4.1.4329.15.3.3.4.8.1.12 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Authentication type used for this WLAN when using this RADIUS server to authenticate users.
| |||||||||||||
| TwlanCPTable | 1.3.6.1.4.1.4329.15.3.3.4.9 | NA | |||||||||||
table · not-accessible · current This table contains configuration of Captive Portal settings for all configured WLAN on EWC. For each of the configured WLAN on the controller one entry is added to this table. Addition/deletion of entries in this table are automatic depending on the addition/deletion of entries in wlanTable table. This table can be accessed using SNMPv3 on behalf of users with privacy. | |||||||||||||
| RwlanCPEntry | 1.3.6.1.4.1.4329.15.3.3.4.9.1 | NA | |||||||||||
row · not-accessible · current An entry in wlanCPTable for each configured WLAN on EWC. Each entry is indexed with corresponding wlan ID of wlanTable. The writable fields in this table can be modified depending on the corresponding wlanTable and type of CP assigned to the WLAN. If the authentication type is 'disabled(0)' for the WLAN, then all other entries in this table have no meaning.
| |||||||||||||
| CwlanCPAuthType | 1.3.6.1.4.1.4329.15.3.3.4.9.1.1 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Type of authentication applied to MU requesting association using SSID associated to this WLAN.
| |||||||||||||
| CwlanCP802HttpRedirect | 1.3.6.1.4.1.4329.15.3.3.4.9.1.2 | TruthValue | RW | ||||||||||
column · TruthValue · read-write · current If it is set to true, then CP will be redirected to configured CP. This value has meaning only for CP of the type 'dot1x(3)'. | |||||||||||||
| CwlanCPExtConnection | 1.3.6.1.4.1.4329.15.3.3.4.9.1.3 | IpAddress | RW | ||||||||||
column · IpAddress · read-write · current IP address of the interface for this CP. | |||||||||||||
| CwlanCPExtPort | 1.3.6.1.4.1.4329.15.3.3.4.9.1.4 | Unsigned32 (32768..65535) | RW | ||||||||||
column · Unsigned32 (32768..65535) · read-write · current The port associated to the CP IP address. | |||||||||||||
| CwlanCPExtEnableHttps | 1.3.6.1.4.1.4329.15.3.3.4.9.1.5 | TruthValue | RW | ||||||||||
column · TruthValue · read-write · current HTTPS support is enabled if this field is set to true. | |||||||||||||
| CwlanCPExtEncryption | 1.3.6.1.4.1.4329.15.3.3.4.9.1.6 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Type of encryption for the CP.
| |||||||||||||
| CwlanCPExtSharedSecret | 1.3.6.1.4.1.4329.15.3.3.4.9.1.7 | OCTET STRING (SIZE (16..64)) | RW | ||||||||||
column · OCTET STRING (SIZE (16..64)) · read-write · current Shared secret used for this captive portal. | |||||||||||||
| CwlanCPExtTosOverride | 1.3.6.1.4.1.4329.15.3.3.4.9.1.8 | TruthValue | RW | ||||||||||
column · TruthValue · read-write · current Override ToS of NAC server usage only. | |||||||||||||
| CwlanCPExtTosValue | 1.3.6.1.4.1.4329.15.3.3.4.9.1.9 | Unsigned32 (0..255) | RW | deprecated | |||||||||
column · Unsigned32 (0..255) · read-write · deprecated ToS value for NAC server only. | |||||||||||||
| CwlanCPExtAddIPtoURL | 1.3.6.1.4.1.4329.15.3.3.4.9.1.10 | TruthValue | RW | ||||||||||
column · TruthValue · read-write · current If this value is set to true, then add EWC IP address and port number to the redirection URL. | |||||||||||||
| CwlanCPIntLogoffButton | 1.3.6.1.4.1.4329.15.3.3.4.9.1.11 | TruthValue | RW | ||||||||||
column · TruthValue · read-write · current If set to true provide 'Logoff' button to the user in CP page. | |||||||||||||
| CwlanCPIntStatusCheckButton | 1.3.6.1.4.1.4329.15.3.3.4.9.1.12 | TruthValue | RW | ||||||||||
column · TruthValue · read-write · current If set to true provide 'Status Check' button to the user in CP page. | |||||||||||||
| CwlanCPReplaceIPwithFQDN | 1.3.6.1.4.1.4329.15.3.3.4.9.1.13 | DisplayString | RW | ||||||||||
column · DisplayString · read-write · current Replace CP gateway IP address with FQDN. | |||||||||||||
| CwlanCPSendLoginTo | 1.3.6.1.4.1.4329.15.3.3.4.9.1.14 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current This field indicates to what URL the successful login session must be redirected. This field qualifies wlanCPRedirectURL.
| |||||||||||||
| CwlanCPRedirectURL | 1.3.6.1.4.1.4329.15.3.3.4.9.1.15 | DisplayString | RW | ||||||||||
column · DisplayString · read-write · current Text string identifying default redirection URL. | |||||||||||||
| CwlanCPGuestAccLifetime | 1.3.6.1.4.1.4329.15.3.3.4.9.1.16 | Unsigned32 | RW | ||||||||||
column · Unsigned32 · read-write · current This value indicates for how many days the guest account is valid. Value of zero indicates that there is no limit for the guest account.
| |||||||||||||
| CwlanCPGuestAllowedLifetimeAcct | 1.3.6.1.4.1.4329.15.3.3.4.9.1.17 | TruthValue | RW | ||||||||||
column · TruthValue · read-write · current If this value is set to true, then guest admin can obtain lifetime account. | |||||||||||||
| CwlanCPGuestSessionLifetime | 1.3.6.1.4.1.4329.15.3.3.4.9.1.18 | Unsigned32 | RW | ||||||||||
column · Unsigned32 · read-write · current The guess account session using this CP cannot last longer than this number of hours. Value of zero means there is no limit for the session.
| |||||||||||||
| CwlanCPGuestIDPrefix | 1.3.6.1.4.1.4329.15.3.3.4.9.1.19 | DisplayString | RW | ||||||||||
column · DisplayString · read-write · current The prefix used for guest portal user ID label. | |||||||||||||
| CwlanCPGuestMinPassLength | 1.3.6.1.4.1.4329.15.3.3.4.9.1.20 | Unsigned32 (1..32) | RW | ||||||||||
column · Unsigned32 (1..32) · read-write · current Minimum password length for the guest user account associated to this WLAN. | |||||||||||||
| CwlanCPGuestMaxConcurrentSession | 1.3.6.1.4.1.4329.15.3.3.4.9.1.21 | Unsigned32 (0..10) | RW | ||||||||||
column · Unsigned32 (0..10) · read-write · current Maximum number of the guest users can use this set of credentials to access this concurrent session. | |||||||||||||
| CwlanCPUseHTTPSforConnection | 1.3.6.1.4.1.4329.15.3.3.4.9.1.22 | TruthValue | RW | ||||||||||
column · TruthValue · read-write · current When this value set to true, use HTTPS for user connection. It has meaning only when wlanCPAuthType is set to internalCP(2) or easyGuestCP(5) or guestSplash(6) | |||||||||||||
| CwlanCPIdentity | 1.3.6.1.4.1.4329.15.3.3.4.9.1.23 | DisplayString | RW | ||||||||||
column · DisplayString · read-write · current wlanCPIdentity is used to identify the EWC to the external captive portal server (ECP) and the ECP to the EWC. | |||||||||||||
| CwlanCPCustomSpecificURL | 1.3.6.1.4.1.4329.15.3.3.4.9.1.24 | DisplayString | RW | ||||||||||
column · DisplayString · read-write · current After a user successfully logs in, the user will be redirected to the URL as defined in the wlanCPCustomSpecificURL. | |||||||||||||
| CwlanCPSelectionOption | 1.3.6.1.4.1.4329.15.3.3.4.9.1.25 | Bits | RW | ||||||||||
column · Bits · read-write · current Append the above parameter(s) to the EWC captive portal redirection URL if one or more of the bits are set.
| |||||||||||||
| SwlanUnsecuredWlanCounts | 1.3.6.1.4.1.4329.15.3.3.4.10 | Counter32 | RO | ||||||||||
scalar · Counter32 · read-only · current Total number of WLAN with security issues. The details of security issues can be found in wlanSecurityReportTable. | |||||||||||||
| TwlanSecurityReportTable | 1.3.6.1.4.1.4329.15.3.3.4.11 | NA | |||||||||||
table · not-accessible · current This table contains the weak configuration settings for all configured WLAN on EWC. For each of the configured WLAN on the controller there exist one entry in this table. Addition/deletion of entries in this table are automatic depending on the addition or deletion of entries in wlanTable table. This table can be accessed using SNMPv3 on behalf of users with privacy. | |||||||||||||
| RwlanSecurityReportEntry | 1.3.6.1.4.1.4329.15.3.3.4.11.1 | NA | |||||||||||
row · not-accessible · current An entry in wlanSecurityReportTable for each configured WLAN on EWC. Each entry is indexed with corresponding wlan ID of wlanTable.
| |||||||||||||
| CwlanSecurityReportFlag | 1.3.6.1.4.1.4329.15.3.3.4.11.1.1 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current Value of secureSetting(2) indicates that WLAN has secure configuration.
| |||||||||||||
| CwlanSecurityReportUnsecureType | 1.3.6.1.4.1.4329.15.3.3.4.11.1.2 | Bits | RO | ||||||||||
column · Bits · read-only · current bit 0: by setting this bit means this WLAN does not use any kind of encryption bit 1: by setting this bit means this WLAN uses weak WEP encryption bit 2: by setting this bit means this WLAN uses weak tkip encryption bit 3: by setting this bit means this WLAN uses default SSID bit 4: by setting this bit means this WLAN uses HotSpot SSID bit 5: by setting this bit means this WLAN uses Rainbow SSID bit 6: by setting this bit means this WLAN uses dictionary word as an encryption key bit 7: by setting this bit means this WLAN uses dictionary word in an encryption key string bit 8: by setting this bit means this WLAN uses a short password key
| |||||||||||||
| CwlanSecurityReportNotes | 1.3.6.1.4.1.4329.15.3.3.4.11.1.3 | DisplayString | RO | ||||||||||
column · DisplayString · read-only · current Textual description of any security issues related to the WLAN is reflected in this field. | |||||||||||||
| TwlanRadiusServerTable | 1.3.6.1.4.1.4329.15.3.3.4.12 | NA | |||||||||||
table · not-accessible · current This table contains configuration of RADIUS Servers settings for all configured WLANs on the Wireless Controller. For each of the configured WLANs on the controller there may exist one or more entries of RADIUS server(s) serving the WLAN. Addition/deletion of entries in this table are automatic depending on the addition/deletion of entries in wlanTable table. | |||||||||||||
| RwlanRadiusServerEntry | 1.3.6.1.4.1.4329.15.3.3.4.12.1 | NA | |||||||||||
| CradiusId | 1.3.6.1.4.1.4329.15.3.3.4.12.1.1 | Unsigned32 | NA | ||||||||||
column · Unsigned32 · not-accessible · current Controller's internal RADIUS index. | |||||||||||||
| CwlanRadiusServerName | 1.3.6.1.4.1.4329.15.3.3.4.12.1.2 | DisplayString | RO | ||||||||||
column · DisplayString · read-only · current Name of the RADIUS server. | |||||||||||||
| CwlanRadiusServerUse | 1.3.6.1.4.1.4329.15.3.3.4.12.1.3 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current use : This means that this WLAN service indexed by wlanID uses this RADIUS server which it is indexed by the radiusId.
| |||||||||||||
| CwlanRadiusServerUsage | 1.3.6.1.4.1.4329.15.3.3.4.12.1.4 | Bits | RW | ||||||||||
column · Bits · read-write · current bit 0: By setting this bit, this RADIUS server is used for authentication. This bit has meaning only when wlanAuthType is set to internalCP(2),
dot1x(3), or externalCP(4).
bit 1: By setting this bit, this RADIUS server is used for MAC-based authentication. This bit has meaning only when
wlanAuthMacBasedAuth is set to true.
bit 2: By setting this bit, this RADIUS server is used for accounting. This bit has meaning only when wlanAuthType is set to internalCP(2), dot1x(3),
or externalCP(4).
| |||||||||||||
| CwlanRadiusServerAuthUseVNSIPAddr | 1.3.6.1.4.1.4329.15.3.3.4.12.1.5 | TruthValue | RW | ||||||||||
column · TruthValue · read-write · current When this value set to true, use the VNS's IP address as NAS IP address during the authentication. | |||||||||||||
| CwlanRadiusServerAuthNASIP | 1.3.6.1.4.1.4329.15.3.3.4.12.1.6 | DisplayString | RW | ||||||||||
column · DisplayString · read-write · current Use this IP address as the NAS IP addresss during the authentication. The default IP address is the VNS IP address. This field has meaning only when the wlanRadiusServerUsage's bit 0 is set. | |||||||||||||
| CwlanRadiusServerAuthUseVNSName | 1.3.6.1.4.1.4329.15.3.3.4.12.1.7 | TruthValue | RW | ||||||||||
column · TruthValue · read-write · current When this value set to true, use the VNS's name as the NAS identifier during the authentication. | |||||||||||||
| CwlanRadiusServerAuthNASId | 1.3.6.1.4.1.4329.15.3.3.4.12.1.8 | DisplayString | RW | ||||||||||
column · DisplayString · read-write · current Use this name as the NAS identifier during the authentication. The default name is the VNS name. This field has meaning only when the wlanRadiusServerUsage's bit 0 is set. | |||||||||||||
| CwlanRadiusServerAuthAuthType | 1.3.6.1.4.1.4329.15.3.3.4.12.1.9 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Authentication type. This field has meaning only when the wlanRadiusServerUsage's bit 0 is set.
| |||||||||||||
| CwlanRadiusServerAcctUseVNSIPAddr | 1.3.6.1.4.1.4329.15.3.3.4.12.1.10 | TruthValue | RW | ||||||||||
column · TruthValue · read-write · current When this value set to true, use the VNS's IP address as NAS IP address during the accounting. | |||||||||||||
| CwlanRadiusServerAcctNASIP | 1.3.6.1.4.1.4329.15.3.3.4.12.1.11 | DisplayString | RW | ||||||||||
column · DisplayString · read-write · current Use this IP address as the NAS IP addresss during the accounting. The default IP address is the VNS IP address. This field has meaning only when the wlanRadiusServerUsage's bit 2 is set. | |||||||||||||
| CwlanRadiusServerAcctUseVNSName | 1.3.6.1.4.1.4329.15.3.3.4.12.1.12 | TruthValue | RW | ||||||||||
column · TruthValue · read-write · current When this value set to true, use the VNS's name as the NAS identifier during the accounting. | |||||||||||||
| CwlanRadiusServerAcctNASId | 1.3.6.1.4.1.4329.15.3.3.4.12.1.13 | DisplayString | RW | ||||||||||
column · DisplayString · read-write · current Use this name as the NAS identifier during the accounting. The default name is the VNS name. This field has meaning only when the wlanRadiusServerUsage's bit 2 is set. | |||||||||||||
| CwlanRadiusServerAcctSIAR | 1.3.6.1.4.1.4329.15.3.3.4.12.1.14 | TruthValue | RW | ||||||||||
column · TruthValue · read-write · current If this value is set to true, then the controller sends interrim accounting records for fast failover events. This field has meaning only when the wlanRadiusServerUsage's bit 2 is set. | |||||||||||||
| CwlanRadiusServerMacUseVNSIPAddr | 1.3.6.1.4.1.4329.15.3.3.4.12.1.15 | TruthValue | RW | ||||||||||
column · TruthValue · read-write · current When this value set to true, use the VNS's IP address as NAS IP address during the MAC based authentication. | |||||||||||||
| CwlanRadiusServerMacNASIP | 1.3.6.1.4.1.4329.15.3.3.4.12.1.16 | DisplayString | RW | ||||||||||
column · DisplayString · read-write · current Use this IP address as the NAS IP addresss during the MAC based authentication. The default IP address is the VNS IP address. This field has meaning only when the wlanRadiusServerUsage's bit 1 is set. | |||||||||||||
| CwlanRadiusServerMacUseVNSName | 1.3.6.1.4.1.4329.15.3.3.4.12.1.17 | TruthValue | RW | ||||||||||
column · TruthValue · read-write · current When this value set to true, use the VNS's name as the NAS identifier during the MAC based authentication. | |||||||||||||
| CwlanRadiusServerMacNASId | 1.3.6.1.4.1.4329.15.3.3.4.12.1.18 | DisplayString | RW | ||||||||||
column · DisplayString · read-write · current Use this name as the NAS identifier during the MAC based authentication. The default name is the VNS name. This field has meaning only when the wlanRadiusServerUsage's bit 1 is set. | |||||||||||||
| CwlanRadiusServerMacAuthType | 1.3.6.1.4.1.4329.15.3.3.4.12.1.19 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Authentication type. This field has meaning only when the wlanRadiusServerUsage's bit 1 is set.
| |||||||||||||
| CwlanRadiusServerMacPW | 1.3.6.1.4.1.4329.15.3.3.4.12.1.20 | DisplayString | RW | ||||||||||
column · DisplayString · read-write · current The password is used for MAC based authentication. This field has meaning only when the wlanRadiusServerUsage's bit 1 is set. | |||||||||||||
| Ntopology | 1.3.6.1.4.1.4329.15.3.4 | ||||||||||||
| NtopologyConfig | 1.3.6.1.4.1.4329.15.3.4.1 | ||||||||||||
| TtopologyTable | 1.3.6.1.4.1.4329.15.3.4.1.1 | NA | |||||||||||
table · not-accessible · current List of topologies configured on EWC. | |||||||||||||
| RtopologyEntry | 1.3.6.1.4.1.4329.15.3.4.1.1.1 | NA | |||||||||||
row · not-accessible · current Configuration information about a topology in topology table. EWC supports different types of topologies, therefore, for complete configuration of a topology not all fields are necessary to be defined or have meaning. Definition of each field in this table specifies topolog-specific characteristics of the field and its relevance.
| |||||||||||||
| CtopologyID | 1.3.6.1.4.1.4329.15.3.4.1.1.1.1 | Unsigned32 | NA | ||||||||||
column · Unsigned32 · not-accessible · current Unique internal identifier of the topology. This item is generated internally by EWC and has no external meaning. | |||||||||||||
| CtopologyName | 1.3.6.1.4.1.4329.15.3.4.1.1.1.2 | DisplayString | RW | ||||||||||
column · DisplayString · read-write · current Name associated with topology. This name must be unique within EWC. Allowable characters for this field are from the set of A-Z, a-z, -!#$:, 0-9, and space. Howerver, it is recommended to avoid leading and trailing spaces. | |||||||||||||
| CtopologyMode | 1.3.6.1.4.1.4329.15.3.4.1.1.1.3 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Type of this topology. This field implies the meaning and necessity of other attributes associated to the topology.
| |||||||||||||
| CtopologyTagged | 1.3.6.1.4.1.4329.15.3.4.1.1.1.4 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current If topology is tagged, then a VLAN ID must be assigned to the topology. Meaning associated to this field is topology specific: - For Admin topology (management port) is always untagged - Ror routed topology has no meaning and always untagged - For all other topologies this field is configurable.
| |||||||||||||
| CtopologyVlanID | 1.3.6.1.4.1.4329.15.3.4.1.1.1.5 | Integer32 (-1 | 1..4095) | RW | ||||||||||
column · Integer32 (-1 | 1..4095) · read-write · current VLAN ID assigned to a tagged topology. For untagged topology this field has no meaning and it is set to -1. | |||||||||||||
| CtopologyEgressPort | 1.3.6.1.4.1.4329.15.3.4.1.1.1.6 | OCTET STRING (SIZE (0..12)) | RW | ||||||||||
column · OCTET STRING (SIZE (0..12)) · read-write · current Egress port associated to this topology if it is tagged and VLANID defined for the topology. This field is represented as octect string: The most significant bit of most significant octet represent first physical port (lowest number port) and second most significant bit of most significant octet represent second physical port and so on. Meaning associated to this field is topology specific: - For Admin topology (management port) this field has no meaning. - Ror routed topology this field has no meaning - For all other topologies: physical, bridge at controller, and bridge at AP topologies this field is configurable. | |||||||||||||
| CtopologyLayer3 | 1.3.6.1.4.1.4329.15.3.4.1.1.1.7 | TruthValue | RW | ||||||||||
column · TruthValue · read-write · current If set to true, then topology has layer three persence. Any topology with layer three presence must have IP address and gateway assigned to it. Meaning associated to this field is topology specific: - For Admin topology (management port) it is always set to true. - Ror bridge at AP this field has no meaning and it is set to false. - For routed and physical topologies it is always set to true. - For bridge at controller type of topology this field is configurable. | |||||||||||||
| CtopologyIPAddress | 1.3.6.1.4.1.4329.15.3.4.1.1.1.8 | IpAddress | RW | ||||||||||
column · IpAddress · read-write · current IP address assigned to the topology as its interface. Meaning associated to this field is topology specific: - This field has meaning if topology has layer three presence. - Ror bridge at AP this field has no meaning and set 0.0.0.0. | |||||||||||||
| CtopologyIPMask | 1.3.6.1.4.1.4329.15.3.4.1.1.1.9 | IpAddress | RW | ||||||||||
column · IpAddress · read-write · current Mask for topology's IP address. This field is only applicable to those topologies that have IP address assigned to them, otherwise it is set either to 255.255.255.255 or 0.0.0.0. | |||||||||||||
| CtopologyMTUsize | 1.3.6.1.4.1.4329.15.3.4.1.1.1.10 | Unsigned32 | RW | ||||||||||
column · Unsigned32 · read-write · current Default MTU size for the topology. This field is only configurable for a topologies that has layer three presence. | |||||||||||||
| CtopologyGateway | 1.3.6.1.4.1.4329.15.3.4.1.1.1.11 | IpAddress | RW | ||||||||||
column · IpAddress · read-write · current Gateway associated to this topology. This field has meaning for a topology that has layer three presence. | |||||||||||||
| CtopologyDHCPUsage | 1.3.6.1.4.1.4329.15.3.4.1.1.1.12 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current The type of DHCP to be used for IP address assignment to associated MU. This field has meaning only if the topology has layer three persense. Meaning associated to this field is topology specific: - For Admin topology (management port) has no meaning. - Ror bridge at AP this field has no meaning. - For all other topologies that their layer three presence is enabled this field is configurable.
| |||||||||||||
| CtopologyAPRegistration | 1.3.6.1.4.1.4329.15.3.4.1.1.1.13 | TruthValue | RW | ||||||||||
column · TruthValue · read-write · current If set to true, then AP registration can be achieved using via this topology. Meaning associated to this field is topology specific: - Always false for Admin (management port) and routed topologies - Always false and has no meaning for bridge at AP topology. - For physical and bridge at controller type topologies that have layer three presence this field can be set to either true or false. | |||||||||||||
| CtopologyManagementTraffic | 1.3.6.1.4.1.4329.15.3.4.1.1.1.14 | TruthValue | RW | ||||||||||
column · TruthValue · read-write · current If set to true, then management data traffic is allowed on this topology. Meaning associated to this field is topology specific: - Always true for Admin topology (management port) - Has no meaning for bridge at AP type topologies - For all other topologies that have layer three presence this field can be set to either true or false. | |||||||||||||
| CtopologySynchronize | 1.3.6.1.4.1.4329.15.3.4.1.1.1.15 | TruthValue | RW | ||||||||||
column · TruthValue · read-write · current If set to true, then topology must be synchronized with peer controller in availability mode operation. Meaning associated to this field is topology specific: - Always false for Admin topology (management port) - Has no meaning for topologies associated to physical ports. - For all other topologies: bridge at controller, routed and bridge at AP type topologies this field can be set to either true or false. | |||||||||||||
| CtopologySyncGateway | 1.3.6.1.4.1.4329.15.3.4.1.1.1.16 | IpAddress | RW | ||||||||||
column · IpAddress · read-write · current Gateway associated to synchronized topology. This field has meaning for those topologies that their topologySynchornize field is set to true. | |||||||||||||
| CtopologySyncMask | 1.3.6.1.4.1.4329.15.3.4.1.1.1.17 | IpAddress | RW | ||||||||||
column · IpAddress · read-write · current Mask of synchronized gateway IP address. This field has meaning for those topologies that their topologySynchornize field is set to true. | |||||||||||||
| CtopologySyncIPStart | 1.3.6.1.4.1.4329.15.3.4.1.1.1.18 | IpAddress | RW | ||||||||||
column · IpAddress · read-write · current Range of IP addresses assigned to remote synchronized topology. This IP address represents starting IP address. This field has meaning for those topologies that their topologySynchornize field is set to true. | |||||||||||||
| CtopologySyncIPEnd | 1.3.6.1.4.1.4329.15.3.4.1.1.1.19 | IpAddress | RW | ||||||||||
column · IpAddress · read-write · current Range of IP addresses assigned to remote synchronized topology. This IP address represents ending IP address. This field has meaning for those topologies that their topologySynchornize field is set to true. | |||||||||||||
| CtopologyStaticIPv6Address | 1.3.6.1.4.1.4329.15.3.4.1.1.1.20 | DisplayString | RW | ||||||||||
column · DisplayString · read-write · current Statically configured IPv6 address assigned to the admin port. | |||||||||||||
| CtopologyLinkLocalIPv6Address | 1.3.6.1.4.1.4329.15.3.4.1.1.1.21 | DisplayString | RO | ||||||||||
column · DisplayString · read-only · current Automatically generated link-local IPv6 address assigned to the admin port. | |||||||||||||
| CtopologyPreFixLength | 1.3.6.1.4.1.4329.15.3.4.1.1.1.22 | Unsigned32 | RW | ||||||||||
column · Unsigned32 · read-write · current The prfix length of the statically configured IPv6 address of the topology. | |||||||||||||
| CtopologyIPv6Gateway | 1.3.6.1.4.1.4329.15.3.4.1.1.1.23 | DisplayString | RW | ||||||||||
column · DisplayString · read-write · current The gateway of IPv6 address that is associated to the admin topology. | |||||||||||||
| CtopologyDynamicEgress | 1.3.6.1.4.1.4329.15.3.4.1.1.1.24 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Enable/disable dynamic egress for this topology. Dynamic egress allows a station to receive from this VLAN if it can send to this VLAN.
| |||||||||||||
| CtopologyIsGroup | 1.3.6.1.4.1.4329.15.3.4.1.1.1.25 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current When this flag is yes, this means the topology is created as a group topology.
| |||||||||||||
| CtopologyGroupMembers | 1.3.6.1.4.1.4329.15.3.4.1.1.1.26 | OCTET STRING (SIZE (0..12)) | RW | ||||||||||
column · OCTET STRING (SIZE (0..12)) · read-write · current This field specifies the topologies for this group. This field has meaning only when topologyIsGroup is set to 1.
This field is represented as octect string.
The most significant bit of the most significant octet of the octet string represents the first topology with topologyID = 0
and second most significant bit of the most significant octet represents the second topology with
topologyID = 1 and so on. | |||||||||||||
| CtopologyMemberId | 1.3.6.1.4.1.4329.15.3.4.1.1.1.27 | Integer32 | RW | ||||||||||
column · Integer32 · read-write · current -1 : Means this topology is not a member of a group topology. valid topology ID : Means this topology is a member of a configured group topology that has this group topology ID. | |||||||||||||
| NtopologyStat | 1.3.6.1.4.1.4329.15.3.4.2 | ||||||||||||
| TtopoStatTable | 1.3.6.1.4.1.4329.15.3.4.2.1 | NA | |||||||||||
table · not-accessible · current Statistics describing traffic transmitted or received for a single topology. This is the traffic on the topology that is coming from or going to destinations on the wired network. | |||||||||||||
| RtopoStatEntry | 1.3.6.1.4.1.4329.15.3.4.2.1.1 | NA | |||||||||||
| CtopoStatName | 1.3.6.1.4.1.4329.15.3.4.2.1.1.1 | DisplayString | RO | ||||||||||
column · DisplayString · read-only · current Topology name. | |||||||||||||
| CtopoStatTxPkts | 1.3.6.1.4.1.4329.15.3.4.2.1.1.2 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current Number of packets transmitted to the wired network on the topology/vlan. | |||||||||||||
| CtopoStatRxPkts | 1.3.6.1.4.1.4329.15.3.4.2.1.1.3 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current Number of packets received from the wired network on the topology/vlan. | |||||||||||||
| CtopoStatTxOctets | 1.3.6.1.4.1.4329.15.3.4.2.1.1.4 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current Number of octets transmitted in frames to the wired network on the topology/vlan. | |||||||||||||
| CtopoStatRxOctets | 1.3.6.1.4.1.4329.15.3.4.2.1.1.5 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current Number of octets received in frames from the wired network on the topology/vlan. | |||||||||||||
| CtopoStatMulticastTxPkts | 1.3.6.1.4.1.4329.15.3.4.2.1.1.6 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current Number of multicast frames transmitted to the wired network on the topology/vlan. | |||||||||||||
| CtopoStatMulticastRxPkts | 1.3.6.1.4.1.4329.15.3.4.2.1.1.7 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current Number of multicast frames received from the wired network on the topology/vlan. | |||||||||||||
| CtopoStatBroadcastTxPkts | 1.3.6.1.4.1.4329.15.3.4.2.1.1.8 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current Number of broadcast frames transmitted to the wired network on the topology/vlan. | |||||||||||||
| CtopoStatBroadcastRxPkts | 1.3.6.1.4.1.4329.15.3.4.2.1.1.9 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current Number of broadcast frames received from the wired network on the topology/vlan. | |||||||||||||
| CtopoStatFrameChkSeqErrors | 1.3.6.1.4.1.4329.15.3.4.2.1.1.10 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current Number of frames with checksum errors received from the wired network on the topology/vlan. | |||||||||||||
| CtopoStatFrameTooLongErrors | 1.3.6.1.4.1.4329.15.3.4.2.1.1.11 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current Number of oversized frames received from the wired network on the topology/vlan. | |||||||||||||
| TtopoExceptionStatTable | 1.3.6.1.4.1.4329.15.3.4.2.2 | NA | |||||||||||
table · not-accessible · current The table contains list of exception-specific filters statistics for configured topologies in EWC. | |||||||||||||
| RtopoExceptionStatEntry | 1.3.6.1.4.1.4329.15.3.4.2.2.1 | NA | |||||||||||
| CtopoExceptionFiterName | 1.3.6.1.4.1.4329.15.3.4.2.2.1.1 | OCTET STRING (SIZE (1..64)) | RW | ||||||||||
column · OCTET STRING (SIZE (1..64)) · read-write · current Exception filter name. | |||||||||||||
| CtopoExceptionStatPktsDenied | 1.3.6.1.4.1.4329.15.3.4.2.2.1.2 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current Number of packets that were denied by defined filters since device's last restart. | |||||||||||||
| CtopoExceptionStatPktsAllowed | 1.3.6.1.4.1.4329.15.3.4.2.2.1.3 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current Number packets that were allowed by defined filters since device's last restart. | |||||||||||||
| TtopoWireStatTable | 1.3.6.1.4.1.4329.15.3.4.2.3 | NA | deprecated | ||||||||||
table · not-accessible · deprecated The table contains statistics describing traffic transmitted or received unencapsulated (i.e. not wrapped in WASSP) for each topology | |||||||||||||
| RtopoWireStatEntry | 1.3.6.1.4.1.4329.15.3.4.2.3.1 | NA | deprecated | ||||||||||
row · not-accessible · deprecated Statistics describing traffic transmitted or received unencapsulated (i.e. not wrapped in WASSP) for a single topology. This is the traffic on the topology that is coming from or going to destinations on the wired network other than to the controller's APs.
| |||||||||||||
| CtopoWireStatName | 1.3.6.1.4.1.4329.15.3.4.2.3.1.1 | DisplayString | RO | deprecated | |||||||||
column · DisplayString · read-only · deprecated Topology name. | |||||||||||||
| CtopoWireStatTxPkts | 1.3.6.1.4.1.4329.15.3.4.2.3.1.2 | Counter64 | RO | deprecated | |||||||||
column · Counter64 · read-only · deprecated Number of packets transmitted unencapsulated to the wired network on the topology/vlan. | |||||||||||||
| CtopoWireStatRxPkts | 1.3.6.1.4.1.4329.15.3.4.2.3.1.3 | Counter64 | RO | deprecated | |||||||||
column · Counter64 · read-only · deprecated Number of packets received unencapsulated from the wired network on the topology/vlan. | |||||||||||||
| CtopoWireStatTxOctets | 1.3.6.1.4.1.4329.15.3.4.2.3.1.4 | Counter64 | RO | deprecated | |||||||||
column · Counter64 · read-only · deprecated Number of octets transmitted in unencapsulated frames to the wired network on the topology/vlan. | |||||||||||||
| CtopoWireStatRxOctets | 1.3.6.1.4.1.4329.15.3.4.2.3.1.5 | Counter64 | RO | deprecated | |||||||||
column · Counter64 · read-only · deprecated Number of octets received in unencapsulated frames to the wired network on the topology/vlan. | |||||||||||||
| CtopoWireStatMulticastTxPkts | 1.3.6.1.4.1.4329.15.3.4.2.3.1.6 | Counter64 | RO | deprecated | |||||||||
column · Counter64 · read-only · deprecated Number of multicast frames transmitted unencapsulated to the wired network on the topology/vlan. | |||||||||||||
| CtopoWireStatMulticastRxPkts | 1.3.6.1.4.1.4329.15.3.4.2.3.1.7 | Counter64 | RO | deprecated | |||||||||
column · Counter64 · read-only · deprecated Number of multicast frames received unencapsulated from the wired network on the topology/vlan. | |||||||||||||
| CtopoWireStatBroadcastTxPkts | 1.3.6.1.4.1.4329.15.3.4.2.3.1.8 | Counter64 | RO | deprecated | |||||||||
column · Counter64 · read-only · deprecated Number of broadcast frames transmitted unencapsulated to the wired network on the topology/vlan. | |||||||||||||
| CtopoWireStatBroadcastRxPkts | 1.3.6.1.4.1.4329.15.3.4.2.3.1.9 | Counter64 | RO | deprecated | |||||||||
column · Counter64 · read-only · deprecated Number of broadcast frames received unencapsulated from the wired network on the topology/vlan. | |||||||||||||
| CtopoWireStatFrameChkSeqErrors | 1.3.6.1.4.1.4329.15.3.4.2.3.1.10 | Counter64 | RO | deprecated | |||||||||
column · Counter64 · read-only · deprecated Number of unencapsulated frames with checksum errors received from the wired network on the topology/vlan. | |||||||||||||
| CtopoWireStatFrameTooLongErrors | 1.3.6.1.4.1.4329.15.3.4.2.3.1.11 | Counter64 | RO | deprecated | |||||||||
column · Counter64 · read-only · deprecated Number of unencapsulated frames with length longer than permitted received from the wired network on the topology/vlan. | |||||||||||||
| TtopoCompleteStatTable | 1.3.6.1.4.1.4329.15.3.4.2.4 | NA | |||||||||||
table · not-accessible · current The table contains statistics describing traffic transmitted and received for each topology on both the wired side and the wireless side. | |||||||||||||
| RtopoCompleteStatEntry | 1.3.6.1.4.1.4329.15.3.4.2.4.1 | NA | |||||||||||
row · not-accessible · current Statistics describing traffic transmitted and received on a single topology on both the wired side and the wireless side.
| |||||||||||||
| CtopoCompleteStatName | 1.3.6.1.4.1.4329.15.3.4.2.4.1.1 | DisplayString | RO | ||||||||||
column · DisplayString · read-only · current Topology name. | |||||||||||||
| CtopoCompleteStatTxPkts | 1.3.6.1.4.1.4329.15.3.4.2.4.1.2 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current Number of packets transmitted to the wired and wireless networks on the topology/vlan. | |||||||||||||
| CtopoCompleteStatRxPkts | 1.3.6.1.4.1.4329.15.3.4.2.4.1.3 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current Number of packets received from the wired and wireless networks on the topology/vlan. | |||||||||||||
| CtopoCompleteStatTxOctets | 1.3.6.1.4.1.4329.15.3.4.2.4.1.4 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current Number of octets transmitted in frames to the wired and wireless networks on the topology/vlan. | |||||||||||||
| CtopoCompleteStatRxOctets | 1.3.6.1.4.1.4329.15.3.4.2.4.1.5 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current Number of octets received in frames from the wired and wireless networks on the topology/vlan. | |||||||||||||
| CtopoCompleteStatMulticastTxPkts | 1.3.6.1.4.1.4329.15.3.4.2.4.1.6 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current Number of multicast frames transmitted to the wired and wireless networks on the topology/vlan. | |||||||||||||
| CtopoCompleteStatMulticastRxPkts | 1.3.6.1.4.1.4329.15.3.4.2.4.1.7 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current Number of multicast frames received from the wired and wireless networks on the topology/vlan. | |||||||||||||
| CtopoCompleteStatBroadcastTxPkts | 1.3.6.1.4.1.4329.15.3.4.2.4.1.8 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current Number of broadcast frames transmitted to the wired and wireless networks on the topology/vlan. | |||||||||||||
| CtopoCompleteStatBroadcastRxPkts | 1.3.6.1.4.1.4329.15.3.4.2.4.1.9 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current Number of broadcast frames received from the wired and wireless networks on the topology/vlan. | |||||||||||||
| CtopoCompleteStatFrameChkSeqErrors | 1.3.6.1.4.1.4329.15.3.4.2.4.1.10 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current Number of frames with checksum errors received from the wired and wireless networks on the topology/vlan. | |||||||||||||
| CtopoCompleteStatFrameTooLongErrors | 1.3.6.1.4.1.4329.15.3.4.2.4.1.11 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current Number of oversized frames received from the wired and wireless networks on the topology/vlan. | |||||||||||||
| NaccessPoints | 1.3.6.1.4.1.4329.15.3.5 | ||||||||||||
| NapConfigObjects | 1.3.6.1.4.1.4329.15.3.5.1 | ||||||||||||
| SapCount | 1.3.6.1.4.1.4329.15.3.5.1.1 | Integer32 | RO | 1 | |||||||||
scalar · Integer32 · read-only · current The count of currently configured AccessPoints associated with this WirelessController. Example values from LibreNMS test devices
| |||||||||||||
| TapTable | 1.3.6.1.4.1.4329.15.3.5.1.2 | NA | |||||||||||
table · not-accessible · current Contains a list of all configured APs associated with the Wireless Controller. | |||||||||||||
| RapEntry | 1.3.6.1.4.1.4329.15.3.5.1.2.1 | NA | |||||||||||
| CapIndex | 1.3.6.1.4.1.4329.15.3.5.1.2.1.1 | Integer32 (1..2147483647) | RW | ||||||||||
column · Integer32 (1..2147483647) · read-write · current Table index for the access point. | |||||||||||||
| CapName | 1.3.6.1.4.1.4329.15.3.5.1.2.1.2 | DisplayString | RW | TestAP | |||||||||
column · DisplayString · read-write · current Access Point's name. Example values from LibreNMS test devices
| |||||||||||||
| CapDesc | 1.3.6.1.4.1.4329.15.3.5.1.2.1.3 | DisplayString | RW | ||||||||||
column · DisplayString · read-write · current Text description of the AP. | |||||||||||||
| CapSerialNumber | 1.3.6.1.4.1.4329.15.3.5.1.2.1.4 | OCTET STRING (SIZE (16)) | RO | ||||||||||
column · OCTET STRING (SIZE (16)) · read-only · current 16-character serial number of the AccessPoint. | |||||||||||||
| CapPortifIndex | 1.3.6.1.4.1.4329.15.3.5.1.2.1.5 | InterfaceIndex | RW | ||||||||||
column · InterfaceIndex · read-write · current ifIndex of the physical port to which this AP is assigned. | |||||||||||||
| CapWiredIfIndex | 1.3.6.1.4.1.4329.15.3.5.1.2.1.6 | InterfaceIndex | RW | ||||||||||
column · InterfaceIndex · read-write · current ifIndex of the wired interface on the AP. | |||||||||||||
| CapSoftwareVersion | 1.3.6.1.4.1.4329.15.3.5.1.2.1.7 | OCTET STRING | RO | ||||||||||
column · OCTET STRING · read-only · current Software version currently installed on the AP. | |||||||||||||
| CapSpecific | 1.3.6.1.4.1.4329.15.3.5.1.2.1.8 | OBJECT IDENTIFIER | RO | ||||||||||
column · OBJECT IDENTIFIER · read-only · current A link back to the OID under the hiPathWirelessProducts branch that identifies the specific version of this AP. | |||||||||||||
| CapBroadcastDisassociate | 1.3.6.1.4.1.4329.15.3.5.1.2.1.9 | TruthValue | RW | ||||||||||
column · TruthValue · read-write · current True indicates that the AP should broadcast disassociation requests, False indicates unicast. | |||||||||||||
| CapRowStatus | 1.3.6.1.4.1.4329.15.3.5.1.2.1.10 | RowStatus | RW | ||||||||||
column · RowStatus · read-write · current RowStatus for the apTable. | |||||||||||||
| CapVlanID | 1.3.6.1.4.1.4329.15.3.5.1.2.1.11 | Integer32 | RW | ||||||||||
column · Integer32 · read-write · current VLAN tag for the packets trasmitted to/from Access Point. Value ranges: (-1) it is not tagged, zero(0) means reserved, 1-4094 tag value. | |||||||||||||
| CapIpAssignmentType | 1.3.6.1.4.1.4329.15.3.5.1.2.1.12 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current IP address assignment type, dhcp(1) = uses DHCP to obtain IP address, static(2) = static IP address is assigned to the access point.
| |||||||||||||
| CapIfMAC | 1.3.6.1.4.1.4329.15.3.5.1.2.1.13 | MacAddress | RO | ||||||||||
column · MacAddress · read-only · current Acess Point's wired interface MAC address. | |||||||||||||
| CapIPAddress | 1.3.6.1.4.1.4329.15.3.5.1.2.1.14 | IpAddress | RW | ||||||||||
column · IpAddress · read-write · current Access Point's wired interface IP address. | |||||||||||||
| CapHwVersion | 1.3.6.1.4.1.4329.15.3.5.1.2.1.17 | DisplayString | RW | ||||||||||
column · DisplayString · read-write · current Text description of Access Point's hardware version. | |||||||||||||
| CapSwVersion | 1.3.6.1.4.1.4329.15.3.5.1.2.1.18 | DisplayString | RW | ||||||||||
column · DisplayString · read-write · current Text description of Access Point's major software version. | |||||||||||||
| CapEnvironment | 1.3.6.1.4.1.4329.15.3.5.1.2.1.19 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Access Point's environment.
| |||||||||||||
| CapHome | 1.3.6.1.4.1.4329.15.3.5.1.2.1.20 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Local session is created when access point registers directly with the controller. Foreign session is mirrored session created via availability feature.
| |||||||||||||
| CapRole | 1.3.6.1.4.1.4329.15.3.5.1.2.1.21 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Indicates whether Access Point is a traffic fordwarder, sensor or guardian
| |||||||||||||
| CapState | 1.3.6.1.4.1.4329.15.3.5.1.2.1.22 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Active means that access point has registered with this controller at some point of time and still has active connection with this controller. This variable has meaning in the context of the controller that query is done. Inactive mean access point has lost the connection with this controller.
| |||||||||||||
| CapStatus | 1.3.6.1.4.1.4329.15.3.5.1.2.1.23 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Registration state for the access point at the time of query, approved(1) means the registration was completed, pending(2) means access point has registered but waiting manual approval from admin.
| |||||||||||||
| CapPollTimeout | 1.3.6.1.4.1.4329.15.3.5.1.2.1.24 | Gauge32 (3..3600) | RW | ||||||||||
column · Gauge32 (3..3600) · read-write · current Duration after which the access point's connection to controller is considered has been lost if polling fails. | |||||||||||||
| CapPollInterval | 1.3.6.1.4.1.4329.15.3.5.1.2.1.25 | Gauge32 | RW | ||||||||||
column · Gauge32 · read-write · current Interval between each poll sent to the controller. | |||||||||||||
| CapTelnetAccess | 1.3.6.1.4.1.4329.15.3.5.1.2.1.26 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Indicates whether telnet access is enabled/disabled. This value only applys to AP26xx, W788, W786 and AP4102x APs. 1 : Enabled. 2 : Disabled. 3 : Telnet is not supported.
| |||||||||||||
| CapMaintainClientSession | 1.3.6.1.4.1.4329.15.3.5.1.2.1.27 | TruthValue | RW | ||||||||||
column · TruthValue · read-write · current If true, Access Point maintains client's session in the event of poll failure. | |||||||||||||
| CapRestartServiceContAbsent | 1.3.6.1.4.1.4329.15.3.5.1.2.1.28 | TruthValue | RW | ||||||||||
column · TruthValue · read-write · current If true, Access Point restarts the service in the absence of controller. | |||||||||||||
| CapHostname | 1.3.6.1.4.1.4329.15.3.5.1.2.1.29 | DisplayString | RO | ||||||||||
column · DisplayString · read-only · current Hostname assigned to Access Point. | |||||||||||||
| CapLocation | 1.3.6.1.4.1.4329.15.3.5.1.2.1.30 | DisplayString | RW | ||||||||||
column · DisplayString · read-write · current Text identifying location of the access point. | |||||||||||||
| CapStaticMTUsize | 1.3.6.1.4.1.4329.15.3.5.1.2.1.31 | Unsigned32 (600..1500) | RW | ||||||||||
column · Unsigned32 (600..1500) · read-write · current Configured MTU size for the access point. Access point will use the lower value of MTU size between statically configured MTU size and dynamically learned MTU size. | |||||||||||||
| CapSiteID | 1.3.6.1.4.1.4329.15.3.5.1.2.1.32 | Integer32 | RW | ||||||||||
column · Integer32 · read-write · current The site ID, as defined in siteTable, that this AP is member of. The value of -1 indicates that AP is not member of any site. | |||||||||||||
| CapZone | 1.3.6.1.4.1.4329.15.3.5.1.2.1.33 | DisplayString | RW | ||||||||||
column · DisplayString · read-write · current The Zone to which the Access Point belongs. | |||||||||||||
| CapLLDP | 1.3.6.1.4.1.4329.15.3.5.1.2.1.34 | TruthValue | RW | ||||||||||
column · TruthValue · read-write · current Enable or disable broadcasting of LLDP information by the wireless AP. | |||||||||||||
| CapSSHAccess | 1.3.6.1.4.1.4329.15.3.5.1.2.1.35 | TruthValue | RW | deprecated | |||||||||
column · TruthValue · read-write · deprecated Enable or Disable SSH access to the Wireless AP. This value only applys to AP36xx, AP37xx, W788C and W786C APs. | |||||||||||||
| CapLEDMode | 1.3.6.1.4.1.4329.15.3.5.1.2.1.36 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current LED status field for the Access Point. off(0): LED is set to off for the AP. wdsSignalStrength(1): LED conveys the strength of the singal, for the details please refer to user manual. indentify(2): Can be used to lacate the AP by making AP to flashing LED repeatedly. normal(3): This indicates AP's normal operational mode.
| |||||||||||||
| CapLocationbasedService | 1.3.6.1.4.1.4329.15.3.5.1.2.1.37 | TruthValue | RW | ||||||||||
column · TruthValue · read-write · current Enable or disable the AeroScout or Ekahau location-based service for the Wireless AP. | |||||||||||||
| CapSecureTunnel | 1.3.6.1.4.1.4329.15.3.5.1.2.1.38 | TruthValue | RW | ||||||||||
column · TruthValue · read-write · current Enable or disable Secure Tunnel between Ap and Controller | |||||||||||||
| CapEncryptCntTraffic | 1.3.6.1.4.1.4329.15.3.5.1.2.1.39 | TruthValue | RW | ||||||||||
column · TruthValue · read-write · current Enable or disable encrypt of control traffic between AP & Controller. This value has meaning only if apSecureTunnel is enabled. | |||||||||||||
| CapMICErrorWarning | 1.3.6.1.4.1.4329.15.3.5.1.2.1.40 | TruthValue | RW | ||||||||||
column · TruthValue · read-write · current Enable or disable MIC error warning generation. | |||||||||||||
| CapSecureDataTunnelType | 1.3.6.1.4.1.4329.15.3.5.1.2.1.41 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current secure data tunnel status between controller and acesss point. disable(0): disable encryption of control and data traffic between AP & Controller. encryptControlTraffic(1): encrypt control traffic between AP & Controller. encryptControlDataTraffic(2): encrypt control and data traffic between AP & Controller. debugMode(3): preserve keys without encryption.
| |||||||||||||
| CapIPMulticastAssembly | 1.3.6.1.4.1.4329.15.3.5.1.2.1.42 | TruthValue | RW | ||||||||||
column · TruthValue · read-write · current Enable or disable fragmentation/reassembly of the IP Multicast frames transmitted over the tunnel between AP and Controller. When set to true, an IP Multicast frame larger than the tunnel MTU will be fragmented when it is placed into the WASSP tunnel and reassembled on the receiving end of the tunnel before being forwarded to the clients. | |||||||||||||
| CapSSHConnection | 1.3.6.1.4.1.4329.15.3.5.1.2.1.43 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Enable or Disable SSH access to the Wireless AP. This value only applys to AP36xx, AP37xx, W788C and W786C APs. 1 : Enabled. 2 : Disabled. 3 : SSH is not supported.
| |||||||||||||
| TapRadioTable | 1.3.6.1.4.1.4329.15.3.5.1.3 | NA | |||||||||||
table · not-accessible · current Table access point radio configuration information. | |||||||||||||
| RapRadioEntry | 1.3.6.1.4.1.4329.15.3.5.1.3.1 | NA | |||||||||||
| CapRadioFrequency | 1.3.6.1.4.1.4329.15.3.5.1.3.1.1 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current The frequency of the radio as supported by the hardware. Supported frequencies are either of 2.5Ghz or 5.0Ghz.
| |||||||||||||
| CapRadioNumber | 1.3.6.1.4.1.4329.15.3.5.1.3.1.2 | Unsigned32 | RO | ||||||||||
column · Unsigned32 · read-only · current Access point radios are numbered from 1 in increasing order. This numbering is limited in the context of AP. This field returns the radio number of the AP indexed by apIndex. | |||||||||||||
| CapRadioType | 1.3.6.1.4.1.4329.15.3.5.1.3.1.3 | INTEGER | RW | deprecated | |||||||||
column · INTEGER · read-write · deprecated Indicates the type of radio (a, a/n, a/c, n-strict, c-strict, b, g, b/g, or b/g/n) as it is configured.
| |||||||||||||
| CapRadioProtocol | 1.3.6.1.4.1.4329.15.3.5.1.3.1.4 | Bits | RW | ||||||||||
column · Bits · read-write · current Enumerates the possible types of 802.11 radio protocols.
| |||||||||||||
| TradioVNSTable | 1.3.6.1.4.1.4329.15.3.5.1.4 | NA | |||||||||||
table · not-accessible · current Table of VNSs the radio is participating in. | |||||||||||||
| RradioVNSEntry | 1.3.6.1.4.1.4329.15.3.5.1.4.1 | NA | |||||||||||
| CradioIfIndex | 1.3.6.1.4.1.4329.15.3.5.1.4.1.1 | InterfaceIndex | RW | ||||||||||
column · InterfaceIndex · read-write · current Radio participating in the VNS. | |||||||||||||
| CvnsIfIndex | 1.3.6.1.4.1.4329.15.3.5.1.4.1.2 | InterfaceIndex | RW | ||||||||||
column · InterfaceIndex · read-write · current ifIndex for the VNS the radio is participating. | |||||||||||||
| CradioVNSRowStatus | 1.3.6.1.4.1.4329.15.3.5.1.4.1.3 | RowStatus | RW | ||||||||||
column · RowStatus · read-write · current RowStatus for the radioVNSTable. | |||||||||||||
| SapFastFailoverEnable | 1.3.6.1.4.1.4329.15.3.5.1.5 | TruthValue | RW | ||||||||||
scalar · TruthValue · read-write · current True indicates that Fast Failover feature is enabled at AP. | |||||||||||||
| SapLinkTimeout | 1.3.6.1.4.1.4329.15.3.5.1.6 | Integer32 | RW | ||||||||||
scalar · Integer32 · read-write · current Time to deteck link failure. The value is in 1-30 seconds. | |||||||||||||
| TapAntennaTable | 1.3.6.1.4.1.4329.15.3.5.1.7 | NA | |||||||||||
table · not-accessible · current Contains a list of antennas configured for each AP associated with the Wireless Controller. All elements in this table are predefined and read-only. | |||||||||||||
| RapAntennaEntry | 1.3.6.1.4.1.4329.15.3.5.1.7.1 | NA | |||||||||||
row · not-accessible · current An entry in this table identifying attributes of one antenna for an AP.
| |||||||||||||
| CapAntennaIndex | 1.3.6.1.4.1.4329.15.3.5.1.7.1.1 | Unsigned32 | NA | ||||||||||
column · Unsigned32 · not-accessible · current Index of an antenna inside an AP. | |||||||||||||
| CapAntennanName | 1.3.6.1.4.1.4329.15.3.5.1.7.1.2 | DisplayString | RO | ||||||||||
column · DisplayString · read-only · current Textual description identifying the antenna. | |||||||||||||
| CapAntennaType | 1.3.6.1.4.1.4329.15.3.5.1.7.1.3 | DisplayString | RW | ||||||||||
column · DisplayString · read-write · current Textual description of antenna type selected for that antenna. | |||||||||||||
| TapRadioAntennaTable | 1.3.6.1.4.1.4329.15.3.5.1.8 | NA | |||||||||||
table · not-accessible · current Contains a list of Radio configured for each AP associated with the Wireless Controller. All elements in this table are predefined and read-only. | |||||||||||||
| RapRadioAntennaEntry | 1.3.6.1.4.1.4329.15.3.5.1.8.1 | NA | |||||||||||
| CapRadioAntennaType | 1.3.6.1.4.1.4329.15.3.5.1.8.1.3 | DisplayString | RO | ||||||||||
column · DisplayString · read-only · current Textual description of antenna type selected for that radio. | |||||||||||||
| CapRadioAntennaModel | 1.3.6.1.4.1.4329.15.3.5.1.8.1.4 | Unsigned32 | RO | ||||||||||
column · Unsigned32 · read-only · current Antenna type. 0 indicates internal antenna. 1 indicates no antenna. Other value indicates specific external antenna type. | |||||||||||||
| CapRadioAttenuation | 1.3.6.1.4.1.4329.15.3.5.1.8.1.5 | Integer32 | RW | ||||||||||
column · Integer32 · read-write · current Cumulative attenuation (in dB) of all components (cables, attenuators) between the radio port and the antenna. A professional installer must configure this value so it does not violate country regulations and must verify that it reflects the actual installed components. If this field value is set to -1, then this radio does not support the attenuation configuration. | |||||||||||||
| NapStatsObjects | 1.3.6.1.4.1.4329.15.3.5.2 | ||||||||||||
| SapActiveCount | 1.3.6.1.4.1.4329.15.3.5.2.1 | Integer32 | RO | 1 | |||||||||
scalar · Integer32 · read-only · current The count of active AccessPoints associated with this WirelessController. Example values from LibreNMS test devices
| |||||||||||||
| TapStatsTable | 1.3.6.1.4.1.4329.15.3.5.2.2 | NA | |||||||||||
table · not-accessible · current Table of statistics for the access points. | |||||||||||||
| RapStatsEntry | 1.3.6.1.4.1.4329.15.3.5.2.2.1 | NA | |||||||||||
| CapInUcastPkts | 1.3.6.1.4.1.4329.15.3.5.2.2.1.1 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current Number of unicast packets from wireless-to-wired network. | |||||||||||||
| CapInNUcastPkts | 1.3.6.1.4.1.4329.15.3.5.2.2.1.2 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current Number of non-unicast packets from wireless-to-wired network. | |||||||||||||
| CapInOctets | 1.3.6.1.4.1.4329.15.3.5.2.2.1.3 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current Number of octets from wireless-to-wired network. | |||||||||||||
| CapInErrors | 1.3.6.1.4.1.4329.15.3.5.2.2.1.4 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current Number of error packets from wireless-to-wired network. | |||||||||||||
| CapInDiscards | 1.3.6.1.4.1.4329.15.3.5.2.2.1.5 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current Number of discarded packets from wireless-to-wired network. | |||||||||||||
| CapOutUcastPkts | 1.3.6.1.4.1.4329.15.3.5.2.2.1.6 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current Number of unicast packets from wired-to-wireless network. | |||||||||||||
| CapOutNUcastPkts | 1.3.6.1.4.1.4329.15.3.5.2.2.1.7 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current Number of non-unicast packets from wired-to-wireless network. | |||||||||||||
| CapOutOctets | 1.3.6.1.4.1.4329.15.3.5.2.2.1.8 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current Number of octets from wired-to-wireless network. | |||||||||||||
| CapOutErrors | 1.3.6.1.4.1.4329.15.3.5.2.2.1.9 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current Number of error packets from wired-to-wireless network. | |||||||||||||
| CapOutDiscards | 1.3.6.1.4.1.4329.15.3.5.2.2.1.10 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current Number of discarded packets from wired-to-wireless network. | |||||||||||||
| CapUpTime | 1.3.6.1.4.1.4329.15.3.5.2.2.1.11 | TimeTicks | RO | ||||||||||
column · TimeTicks · read-only · current The time (in hundredths of a second) since the management portion of the access point was last re-initialized. | |||||||||||||
| CapCredentialType | 1.3.6.1.4.1.4329.15.3.5.2.2.1.12 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current Supported certificate type used by AP for commnuication. none(0) = not supported, TLS(1) = Trasport Layer Security (TLS), PEAP(2) = Protected Extensible Authentication Protocol, all(2) = supports all supported EAP.
| |||||||||||||
| CapCertificateExpiry | 1.3.6.1.4.1.4329.15.3.5.2.2.1.13 | TimeTicks | RO | ||||||||||
column · TimeTicks · read-only · current The number of timeticks from January, 1st, 1970 to the date when the certificate expires (issued certificate no longer is valid). | |||||||||||||
| CapStatsMuCounts | 1.3.6.1.4.1.4329.15.3.5.2.2.1.14 | Unsigned32 | RO | 10 | |||||||||
column · Unsigned32 · read-only · current Number of MUs currently associated with this AP. Example values from LibreNMS test devices
| |||||||||||||
| CapStatsSessionDuration | 1.3.6.1.4.1.4329.15.3.5.2.2.1.15 | TimeTicks | RO | ||||||||||
column · TimeTicks · read-only · current Elapse time since the access point's session has started. | |||||||||||||
| CapTotalStationsA | 1.3.6.1.4.1.4329.15.3.5.2.2.1.16 | Unsigned32 | RO | ||||||||||
column · Unsigned32 · read-only · current Number of MUs that are currently associated to this AP using dot11 connection mode 'a'. | |||||||||||||
| CapTotalStationsB | 1.3.6.1.4.1.4329.15.3.5.2.2.1.17 | Unsigned32 | RO | ||||||||||
column · Unsigned32 · read-only · current Number of MUs that are currently associated to this AP using dot11 connection mode 'b'. | |||||||||||||
| CapTotalStationsG | 1.3.6.1.4.1.4329.15.3.5.2.2.1.18 | Unsigned32 | RO | ||||||||||
column · Unsigned32 · read-only · current Number of MUs that are currently associated to this AP using dot11 connection mode 'g'. | |||||||||||||
| CapTotalStationsN50 | 1.3.6.1.4.1.4329.15.3.5.2.2.1.19 | Unsigned32 | RO | ||||||||||
column · Unsigned32 · read-only · current Number of MUs that are currently associated to this AP using dot11 connection mode 'n 5.0 Ghz'. | |||||||||||||
| CapTotalStationsN24 | 1.3.6.1.4.1.4329.15.3.5.2.2.1.20 | Unsigned32 | RO | ||||||||||
column · Unsigned32 · read-only · current Number of MUs that are currently associated to this AP using dot11 connection mode 'n 2.4 Ghz'. | |||||||||||||
| CapInvalidPolicyCount | 1.3.6.1.4.1.4329.15.3.5.2.2.1.21 | Unsigned32 | RO | ||||||||||
column · Unsigned32 · read-only · current Number of invalid role has been assigned to the AP | |||||||||||||
| CapInterfaceMTU | 1.3.6.1.4.1.4329.15.3.5.2.2.1.22 | Unsigned32 | RO | ||||||||||
column · Unsigned32 · read-only · current The AP's configured ethernet interface MTU size in bytes. | |||||||||||||
| CapEffectiveTunnelMTU | 1.3.6.1.4.1.4329.15.3.5.2.2.1.23 | Unsigned32 | RO | ||||||||||
column · Unsigned32 · read-only · current The AP Effective Tunnel MTU determines the maximum length of the frames that can be tunnelled without fragmentation, after subtracting the tunnel headers (WASSP and IPSEC). The AP Effective Tunnel MTU is determined for each AP tunnel as minimum between the Static MTU (configurable) and Dynamic MTU (learned from the ICMP path discovery). | |||||||||||||
| CapTotalStationsAC | 1.3.6.1.4.1.4329.15.3.5.2.2.1.24 | Unsigned32 | RO | ||||||||||
column · Unsigned32 · read-only · current Number of MUs that are currently associated to this AP using dot11ac connection mode. | |||||||||||||
| CapTotalStationsAInOctets | 1.3.6.1.4.1.4329.15.3.5.2.2.1.25 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current Number of octets from client to AP for clients using protocol 802.11a. | |||||||||||||
| CapTotalStationsAOutOctets | 1.3.6.1.4.1.4329.15.3.5.2.2.1.26 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current Number of octets from AP to client for clients using protocol 802.11a. | |||||||||||||
| CapTotalStationsBInOctets | 1.3.6.1.4.1.4329.15.3.5.2.2.1.27 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current Number of octets from client to AP for clients using protocol 802.11b. | |||||||||||||
| CapTotalStationsBOutOctets | 1.3.6.1.4.1.4329.15.3.5.2.2.1.28 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current Number of octets from AP to client for clients using protocol 802.11b. | |||||||||||||
| CapTotalStationsGInOctets | 1.3.6.1.4.1.4329.15.3.5.2.2.1.29 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current Number of octets from client to AP for clients using protocol 802.11g. | |||||||||||||
| CapTotalStationsGOutOctets | 1.3.6.1.4.1.4329.15.3.5.2.2.1.30 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current Number of octets from AP to client for clients using protocol 802.11g. | |||||||||||||
| CapTotalStationsN50InOctets | 1.3.6.1.4.1.4329.15.3.5.2.2.1.31 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current Number of octets from client to AP for clients using protocol 802.11n (5Ghz). | |||||||||||||
| CapTotalStationsN50OutOctets | 1.3.6.1.4.1.4329.15.3.5.2.2.1.32 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current Number of octets from AP to client for clients using protocol 802.11n (5Ghz). | |||||||||||||
| CapTotalStationsN24InOctets | 1.3.6.1.4.1.4329.15.3.5.2.2.1.33 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current Number of octets from client to AP for clients using protocol 802.11n (2.4Ghz). | |||||||||||||
| CapTotalStationsN24OutOctets | 1.3.6.1.4.1.4329.15.3.5.2.2.1.34 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current Number of octets from AP to client for clients using protocol 802.11n (2.4Ghz). | |||||||||||||
| CapTotalStationsACInOctets | 1.3.6.1.4.1.4329.15.3.5.2.2.1.35 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current Number of octets from client to AP for clients using protocol 802.11ac. | |||||||||||||
| CapTotalStationsACOutOctets | 1.3.6.1.4.1.4329.15.3.5.2.2.1.36 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current Number of octets from AP to client for clients using protocol 802.11ac. | |||||||||||||
| SapRegistrationRequests | 1.3.6.1.4.1.4329.15.3.5.2.3 | Counter32 | RO | ||||||||||
scalar · Counter32 · read-only · current Total registration request have been received by all access points since last reboot. | |||||||||||||
| TapRadioStatusTable | 1.3.6.1.4.1.4329.15.3.5.2.4 | NA | |||||||||||
table · not-accessible · current Table of radio configuration attributes that the AP can change dynamically. It contains one entry for each radio of each active AP. | |||||||||||||
| RapRadioStatusEntry | 1.3.6.1.4.1.4329.15.3.5.2.4.1 | NA | |||||||||||
row · not-accessible · current The configuration attributes of one AP radio that the AP can change dynamically.
| |||||||||||||
| CapRadioStatusChannel | 1.3.6.1.4.1.4329.15.3.5.2.4.1.1 | Unsigned32 | RO | 5220 | |||||||||
column · Unsigned32 · read-only · current The lowest 20 MHz channel of the 20/40/80 MHz wide channel on which the radio is operating. This can be different from the administratively configured channel as a result of the AP complying with regulatory requirements like DFS or adapting to the RF environment (e.g. DCS). If this field value is set to 0, then this means this radio is off or this AP is in Guardian mode. | |||||||||||||
| CapRadioStatusChannelWidth | 1.3.6.1.4.1.4329.15.3.5.2.4.1.2 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current Maximum width of the channel being served by the AP's radio. The AP may select a different channel width from the administratively configured width in order to comply with regulatory requirements and the current RF environment.
| |||||||||||||
| CapRadioStatusChannelOffset | 1.3.6.1.4.1.4329.15.3.5.2.4.1.3 | Unsigned32 | RO | ||||||||||
column · Unsigned32 · read-only · current This is the offset (in 20 MHz channels) of the primary channel from the lowest 20 MHz channel within an aggregated channel. The offset can be 0 if the primary channel is the same as the lowest channel or it can be 1,2 or 3 depending on the aggregate channel width. The AP may select a different channel width from the administratively configured width in order to comply with regulatory requirements and the current RF environment. | |||||||||||||
| TapPerformanceReportByRadioTable | 1.3.6.1.4.1.4329.15.3.5.2.5 | NA | |||||||||||
table · not-accessible · current Table of AP performance statistics by radio that the AP can change dynamically. It contains one entry for each radio of each active AP. | |||||||||||||
| RapPerformanceReportByRadioEntry | 1.3.6.1.4.1.4329.15.3.5.2.5.1 | NA | |||||||||||
row · not-accessible · current The AP radio performance statistics of one AP radio.
| |||||||||||||
| CapRadioIndex | 1.3.6.1.4.1.4329.15.3.5.2.5.1.1 | Integer32 (1..2) | NA | ||||||||||
column · Integer32 (1..2) · not-accessible · current Index of an radio inside an AP. | |||||||||||||
| CapPerfRadioPrevPeakChannelUtilization | 1.3.6.1.4.1.4329.15.3.5.2.5.1.2 | Gauge32 | RO | ||||||||||
column · Gauge32 · read-only · current Peak channel utilization in % from last 15 minute interval. | |||||||||||||
| CapPerfRadioCurPeakChannelUtilization | 1.3.6.1.4.1.4329.15.3.5.2.5.1.3 | Gauge32 | RO | ||||||||||
column · Gauge32 · read-only · current Peak channel utilization in % of current 15 minute interval. | |||||||||||||
| CapPerfRadioAverageChannelUtilization | 1.3.6.1.4.1.4329.15.3.5.2.5.1.4 | HundredthOfGauge32 | RO | ||||||||||
column · HundredthOfGauge32 · read-only · current Running average of channel utilization in hundredth of a %. | |||||||||||||
| CapPerfRadioCurrentChannelUtilization | 1.3.6.1.4.1.4329.15.3.5.2.5.1.5 | Gauge32 | RO | 3 | |||||||||
| CapPerfRadioPrevPeakRSS | 1.3.6.1.4.1.4329.15.3.5.2.5.1.6 | Gauge32 | RO | ||||||||||
column · Gauge32 · read-only · current Peak RSS in dBm from last 15 minute interval. Value of -100 means this field is not available. | |||||||||||||
| CapPerfRadioCurPeakRSS | 1.3.6.1.4.1.4329.15.3.5.2.5.1.7 | Gauge32 | RO | ||||||||||
column · Gauge32 · read-only · current Peak RSS in dBm of current 15 minute interval. Value of -100 means this field is not available. | |||||||||||||
| CapPerfRadioAverageRSS | 1.3.6.1.4.1.4329.15.3.5.2.5.1.8 | HundredthOfInt32 | RO | ||||||||||
column · HundredthOfInt32 · read-only · current Running average of RSS in hundredth of a dBm. Value of -10000 means this field is not available. | |||||||||||||
| CapPerfRadioCurrentRSS | 1.3.6.1.4.1.4329.15.3.5.2.5.1.9 | Gauge32 | RO | -44 | |||||||||
| CapPerfRadioPrevPeakSNR | 1.3.6.1.4.1.4329.15.3.5.2.5.1.10 | Gauge32 | RO | ||||||||||
column · Gauge32 · read-only · current Peak SNR in dB from last 15 minute interval. Value of -100 means this field is not available. | |||||||||||||
| CapPerfRadioCurPeakSNR | 1.3.6.1.4.1.4329.15.3.5.2.5.1.11 | Gauge32 | RO | ||||||||||
column · Gauge32 · read-only · current Peak SNR in dB of current 15 minute interval. Value of -100 means this field is not available. | |||||||||||||
| CapPerfRadioAverageSNR | 1.3.6.1.4.1.4329.15.3.5.2.5.1.12 | HundredthOfInt32 | RO | ||||||||||
column · HundredthOfInt32 · read-only · current Running average of SNR in hundredth of a dB. Value of -10000 means this field is not available. | |||||||||||||
| CapPerfRadioCurrentSNR | 1.3.6.1.4.1.4329.15.3.5.2.5.1.13 | Gauge32 | RO | 52 | |||||||||
| CapPerfRadioPrevPeakPktRetx | 1.3.6.1.4.1.4329.15.3.5.2.5.1.14 | HundredthOfGauge64 | RO | ||||||||||
column · HundredthOfGauge64 · read-only · current Peak packet retransmissions in hundredth of pps from last 15 minute interval. | |||||||||||||
| CapPerfRadioCurPeakPktRetx | 1.3.6.1.4.1.4329.15.3.5.2.5.1.15 | HundredthOfGauge64 | RO | ||||||||||
column · HundredthOfGauge64 · read-only · current Peak packet retransmissions in hundredth of pps of current 15 minute interval. | |||||||||||||
| CapPerfRadioAveragePktRetx | 1.3.6.1.4.1.4329.15.3.5.2.5.1.16 | HundredthOfGauge64 | RO | ||||||||||
column · HundredthOfGauge64 · read-only · current Running average of packet retransmissions in hundredth of pps. | |||||||||||||
| CapPerfRadioCurrentPktRetx | 1.3.6.1.4.1.4329.15.3.5.2.5.1.17 | HundredthOfGauge64 | RO | ||||||||||
column · HundredthOfGauge64 · read-only · current Packet retransmissions in hundredth of pps from latest statistics from AP. | |||||||||||||
| CapPerfRadioPktRetx | 1.3.6.1.4.1.4329.15.3.5.2.5.1.18 | Counter64 | RO | 362674 | |||||||||
| TapAccessibilityTable | 1.3.6.1.4.1.4329.15.3.5.2.6 | NA | |||||||||||
table · not-accessible · current A table showing the rate of associations, reassociations and deauthentications/dissassociations from each AP radio. The table contains one row per radio per active AP. | |||||||||||||
| RapAccessibilityEntry | 1.3.6.1.4.1.4329.15.3.5.2.6.1 | NA | |||||||||||
row · not-accessible · current The accessibility statistics of one AP radio.
| |||||||||||||
| CapAccPrevPeakAssocReqRx | 1.3.6.1.4.1.4329.15.3.5.2.6.1.1 | HundredthOfGauge64 | RO | ||||||||||
column · HundredthOfGauge64 · read-only · current Peak number of association requests in hundredth of requests per second received by AP from last 15 minute interval. | |||||||||||||
| CapAccCurPeakAssocReqRx | 1.3.6.1.4.1.4329.15.3.5.2.6.1.2 | HundredthOfGauge64 | RO | ||||||||||
column · HundredthOfGauge64 · read-only · current Peak number of association requests in hundredth of requests per second received by AP of current 15 minute interval. | |||||||||||||
| CapAccAverageAssocReqRx | 1.3.6.1.4.1.4329.15.3.5.2.6.1.3 | HundredthOfGauge64 | RO | ||||||||||
column · HundredthOfGauge64 · read-only · current Running average of association requests in hundredth of requests per second received by an AP radio. | |||||||||||||
| CapAccCurrentAssocReqRx | 1.3.6.1.4.1.4329.15.3.5.2.6.1.4 | HundredthOfGauge64 | RO | ||||||||||
column · HundredthOfGauge64 · read-only · current Association requests in hundredth of requests per second from latest statistics from AP. | |||||||||||||
| CapAccAssocReqRx | 1.3.6.1.4.1.4329.15.3.5.2.6.1.5 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current Running counter of association requests. | |||||||||||||
| CapAccPrevPeakReassocReqRx | 1.3.6.1.4.1.4329.15.3.5.2.6.1.6 | HundredthOfGauge64 | RO | ||||||||||
column · HundredthOfGauge64 · read-only · current Peak number of re-association requests in hundredth of requests per second received by an AP radio from last 15 minute interval. | |||||||||||||
| CapAccCurPeakReassocReqRx | 1.3.6.1.4.1.4329.15.3.5.2.6.1.7 | HundredthOfGauge64 | RO | ||||||||||
column · HundredthOfGauge64 · read-only · current Peak number of re-association requests in hundredth of requests per second received by an AP radio of current 15 minute interval. | |||||||||||||
| CapAccAverageReassocReqRx | 1.3.6.1.4.1.4329.15.3.5.2.6.1.8 | HundredthOfGauge64 | RO | ||||||||||
column · HundredthOfGauge64 · read-only · current Running average of re-association requests in hundredth of requests per second received by an AP radio. | |||||||||||||
| CapAccCurrentReassocReqRx | 1.3.6.1.4.1.4329.15.3.5.2.6.1.9 | HundredthOfGauge64 | RO | ||||||||||
column · HundredthOfGauge64 · read-only · current Re-association requests in hundredth of requests per second received by an AP radio from latest statistics from AP. | |||||||||||||
| CapAccReassocReqRx | 1.3.6.1.4.1.4329.15.3.5.2.6.1.10 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current Running counter of re-association requests received by an AP radio. | |||||||||||||
| CapAccPrevPeakDisassocDeauthReqTx | 1.3.6.1.4.1.4329.15.3.5.2.6.1.11 | HundredthOfGauge64 | RO | ||||||||||
column · HundredthOfGauge64 · read-only · current Peak number of disassociation/deauthentication requests in hundredth of requests per second transmitted by an AP radio from last 15 minute interval. | |||||||||||||
| CapAccCurPeakDisassocDeauthReqTx | 1.3.6.1.4.1.4329.15.3.5.2.6.1.12 | HundredthOfGauge64 | RO | ||||||||||
column · HundredthOfGauge64 · read-only · current Peak number of disassociation/deauthentication requests in hundredth of requests per second transmitted by an AP radio of current 15 minute interval. | |||||||||||||
| CapAccAverageDisassocDeauthReqTx | 1.3.6.1.4.1.4329.15.3.5.2.6.1.13 | HundredthOfGauge64 | RO | ||||||||||
column · HundredthOfGauge64 · read-only · current Running average of disassociation/deauthentication requests in hundredth of requests per second transmitted by an AP radio. | |||||||||||||
| CapAccCurrentDisassocDeauthReqTx | 1.3.6.1.4.1.4329.15.3.5.2.6.1.14 | HundredthOfGauge64 | RO | ||||||||||
column · HundredthOfGauge64 · read-only · current Disassociation/deauthentication requests in hundredth of requests per second transmitted by an AP radio from latest statistics from AP. | |||||||||||||
| CapAccDisassocDeauthReqTx | 1.3.6.1.4.1.4329.15.3.5.2.6.1.15 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current Running counter of disassociation/deauthentication requests transmitted by an AP radio. | |||||||||||||
| CapAccPrevPeakDisassocDeauthReqRx | 1.3.6.1.4.1.4329.15.3.5.2.6.1.16 | HundredthOfGauge64 | RO | ||||||||||
column · HundredthOfGauge64 · read-only · current Peak number of disassociation/deauthentication requests in hundredth of requests per second received by an AP radio from last 15 minute interval. | |||||||||||||
| CapAccCurPeakDisassocDeauthReqRx | 1.3.6.1.4.1.4329.15.3.5.2.6.1.17 | HundredthOfGauge64 | RO | ||||||||||
column · HundredthOfGauge64 · read-only · current Peak number of disassociation/deauthentication requests in hundredth of requests per second received by an AP radio of current 15 minute interval. | |||||||||||||
| CapAccAverageDisassocDeauthReqRx | 1.3.6.1.4.1.4329.15.3.5.2.6.1.18 | HundredthOfGauge64 | RO | ||||||||||
column · HundredthOfGauge64 · read-only · current Running average of disassociation/deauthentication requests in hundredth of requests per second received by an AP radio. | |||||||||||||
| CapAccCurrentDisassocDeauthReqRx | 1.3.6.1.4.1.4329.15.3.5.2.6.1.19 | HundredthOfGauge64 | RO | ||||||||||
column · HundredthOfGauge64 · read-only · current Disassociation/deauthentication requests in hundredth of requests per second received by an AP radio from latest statistics from AP. | |||||||||||||
| CapAccDisassocDeauthReqRx | 1.3.6.1.4.1.4329.15.3.5.2.6.1.20 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current Running counter of disassociation/deauthentication requests received by an AP radio. | |||||||||||||
| TapPerformanceReportbyRadioAndWlanTable | 1.3.6.1.4.1.4329.15.3.5.2.7 | NA | |||||||||||
table · not-accessible · current Table of AP performance statistics by AP, AP radio and WLAN. | |||||||||||||
| RapPerformanceReportbyRadioAndWlanEntry | 1.3.6.1.4.1.4329.15.3.5.2.7.1 | NA | |||||||||||
row · not-accessible · current The AP performance statistics of one AP radio and WLAN.
| |||||||||||||
| CapPerfWlanPrevPeakClientsPerSec | 1.3.6.1.4.1.4329.15.3.5.2.7.1.1 | Gauge32 | RO | ||||||||||
column · Gauge32 · read-only · current Peak clients per second from last 15 minute interval. | |||||||||||||
| CapPerfWlanCurPeakClientsPerSec | 1.3.6.1.4.1.4329.15.3.5.2.7.1.2 | Gauge32 | RO | ||||||||||
column · Gauge32 · read-only · current Peak clients per second of current 15 minute interval. | |||||||||||||
| CapPerfWlanAverageClientsPerSec | 1.3.6.1.4.1.4329.15.3.5.2.7.1.3 | HundredthOfGauge32 | RO | ||||||||||
column · HundredthOfGauge32 · read-only · current Running average of clients in hundredth of clients per second. | |||||||||||||
| CapPerfWlanCurrentClientsPerSec | 1.3.6.1.4.1.4329.15.3.5.2.7.1.4 | Gauge32 | RO | ||||||||||
column · Gauge32 · read-only · current Clients per second from latest statistics from AP. | |||||||||||||
| CapPerfWlanPrevPeakULOctetsPerSec | 1.3.6.1.4.1.4329.15.3.5.2.7.1.5 | HundredthOfGauge64 | RO | ||||||||||
column · HundredthOfGauge64 · read-only · current Peak uplink octets in hundredth of octets per second from last 15 minute interval. | |||||||||||||
| CapPerfWlanCurPeakULOctetsPerSec | 1.3.6.1.4.1.4329.15.3.5.2.7.1.6 | HundredthOfGauge64 | RO | ||||||||||
column · HundredthOfGauge64 · read-only · current Peak uplink octets in hundredth of octets per second of current 15 minute interval. | |||||||||||||
| CapPerfWlanAverageULOctetsPerSec | 1.3.6.1.4.1.4329.15.3.5.2.7.1.7 | HundredthOfGauge64 | RO | ||||||||||
column · HundredthOfGauge64 · read-only · current Running average of uplink hundredth of octets per second. | |||||||||||||
| CapPerfWlanCurrentULOctetsPerSec | 1.3.6.1.4.1.4329.15.3.5.2.7.1.8 | HundredthOfGauge64 | RO | ||||||||||
column · HundredthOfGauge64 · read-only · current Uplink octets in hundredth of octets per second from latest statistics from AP. | |||||||||||||
| CapPerfWlanULOctets | 1.3.6.1.4.1.4329.15.3.5.2.7.1.9 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current Running counter of uplink octets per second. | |||||||||||||
| CapPerfWlanPrevPeakULPktsPerSec | 1.3.6.1.4.1.4329.15.3.5.2.7.1.10 | HundredthOfGauge64 | RO | ||||||||||
column · HundredthOfGauge64 · read-only · current Peak uplink packets in hundredth of packets per second from last 15 minute interval. | |||||||||||||
| CapPerfWlanCurPeakULPktsPerSec | 1.3.6.1.4.1.4329.15.3.5.2.7.1.11 | HundredthOfGauge64 | RO | ||||||||||
column · HundredthOfGauge64 · read-only · current Peak uplink packets in hundredth of packets per second of current 15 minute interval. | |||||||||||||
| CapPerfWlanAverageULPktsPerSec | 1.3.6.1.4.1.4329.15.3.5.2.7.1.12 | HundredthOfGauge64 | RO | ||||||||||
column · HundredthOfGauge64 · read-only · current Running average of uplink packets in hundredth of packets per second. | |||||||||||||
| CapPerfWlanCurrentULPktsPerSec | 1.3.6.1.4.1.4329.15.3.5.2.7.1.13 | HundredthOfGauge64 | RO | ||||||||||
column · HundredthOfGauge64 · read-only · current Uplink packets in hundredth of packets per second from latest statistics from AP. | |||||||||||||
| CapPerfWlanULPkts | 1.3.6.1.4.1.4329.15.3.5.2.7.1.14 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current Running counter of uplink packets per second. | |||||||||||||
| CapPerfWlanPrevPeakDLOctetsPerSec | 1.3.6.1.4.1.4329.15.3.5.2.7.1.15 | HundredthOfGauge64 | RO | ||||||||||
column · HundredthOfGauge64 · read-only · current Peak downlink octets in hundredth of octets per second from last 15 minute interval. | |||||||||||||
| CapPerfWlanCurPeakDLOctetsPerSec | 1.3.6.1.4.1.4329.15.3.5.2.7.1.16 | HundredthOfGauge64 | RO | ||||||||||
column · HundredthOfGauge64 · read-only · current Peak downlink octets in hundredth of octets per second of current 15 minute interval. | |||||||||||||
| CapPerfWlanAverageDLOctetsPerSec | 1.3.6.1.4.1.4329.15.3.5.2.7.1.17 | HundredthOfGauge64 | RO | ||||||||||
column · HundredthOfGauge64 · read-only · current Running average of downlink octets in hundredth of octets per second. | |||||||||||||
| CapPerfWlanCurrentDLOctetsPerSec | 1.3.6.1.4.1.4329.15.3.5.2.7.1.18 | HundredthOfGauge64 | RO | ||||||||||
column · HundredthOfGauge64 · read-only · current Downlink octets in hundredth octets per second from latest statistics from AP. | |||||||||||||
| CapPerfWlanDLOctets | 1.3.6.1.4.1.4329.15.3.5.2.7.1.19 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current Running counter of downlink octets per second. | |||||||||||||
| CapPerfWlanPrevPeakDLPktsPerSec | 1.3.6.1.4.1.4329.15.3.5.2.7.1.20 | HundredthOfGauge64 | RO | ||||||||||
column · HundredthOfGauge64 · read-only · current Peak downlink packets in hundredth of packets per second from last 15 minute interval. | |||||||||||||
| CapPerfWlanCurPeakDLPktsPerSec | 1.3.6.1.4.1.4329.15.3.5.2.7.1.21 | HundredthOfGauge64 | RO | ||||||||||
column · HundredthOfGauge64 · read-only · current Peak downlink packets in hundredth of packets per second of current 15 minute interval. | |||||||||||||
| CapPerfWlanAverageDLPktsPerSec | 1.3.6.1.4.1.4329.15.3.5.2.7.1.22 | HundredthOfGauge64 | RO | ||||||||||
column · HundredthOfGauge64 · read-only · current Running average of downlink packets in hundredth of packets per second. | |||||||||||||
| CapPerfWlanCurrentDLPktsPerSec | 1.3.6.1.4.1.4329.15.3.5.2.7.1.23 | HundredthOfGauge64 | RO | ||||||||||
column · HundredthOfGauge64 · read-only · current Downlink packets in hundredth of packets per second from latest statistics from AP. | |||||||||||||
| CapPerfWlanDLPkts | 1.3.6.1.4.1.4329.15.3.5.2.7.1.24 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current Running counter of downlink packets per second. | |||||||||||||
| TapChannelUtilizationTable | 1.3.6.1.4.1.4329.15.3.5.2.8 | NA | |||||||||||
table · not-accessible · current Table of AP utilization by channel that the AP can change dynamically. It contains one entry for each radio and channel of each active AP. | |||||||||||||
| RapChannelUtilizationEntry | 1.3.6.1.4.1.4329.15.3.5.2.8.1 | NA | |||||||||||
row · not-accessible · current The AP performance statistics of one AP radio and channel.
| |||||||||||||
| Cchannel | 1.3.6.1.4.1.4329.15.3.5.2.8.1.1 | Unsigned32 | NA | ||||||||||
column · Unsigned32 · not-accessible · current Channel on which utilization is measured. | |||||||||||||
| CapChnlUtilPrevPeakUtilization | 1.3.6.1.4.1.4329.15.3.5.2.8.1.2 | Gauge32 | RO | ||||||||||
column · Gauge32 · read-only · current Peak channel utilization in % from last 15 minute interval. | |||||||||||||
| CapChnlUtilCurPeakUtilization | 1.3.6.1.4.1.4329.15.3.5.2.8.1.3 | Gauge32 | RO | ||||||||||
column · Gauge32 · read-only · current Peak channel utilization in % of current 15 minute interval. | |||||||||||||
| CapChnlUtilAverageUtilization | 1.3.6.1.4.1.4329.15.3.5.2.8.1.4 | HundredthOfGauge32 | RO | ||||||||||
column · HundredthOfGauge32 · read-only · current Running average of channel utilization in hundredth of %. | |||||||||||||
| CapChnlUtilCurrentUtilization | 1.3.6.1.4.1.4329.15.3.5.2.8.1.5 | Gauge32 | RO | ||||||||||
column · Gauge32 · read-only · current Channel utilization in % from latest statistics from AP. | |||||||||||||
| TapNeighboursTable | 1.3.6.1.4.1.4329.15.3.5.2.9 | NA | |||||||||||
table · not-accessible · current A table showing the BSSID, RSS, operating radio channel and detailed information of a nearby AP. The table contains one row per nearby AP per radio per active AP. | |||||||||||||
| RapNeighboursEntry | 1.3.6.1.4.1.4329.15.3.5.2.9.1 | NA | |||||||||||
row · not-accessible · current The configuration attributes of one nearby AP.
| |||||||||||||
| CnearbyApIndex | 1.3.6.1.4.1.4329.15.3.5.2.9.1.1 | Unsigned32 | NA | ||||||||||
column · Unsigned32 · not-accessible · current Nearby AP index. | |||||||||||||
| CnearbyApInfo | 1.3.6.1.4.1.4329.15.3.5.2.9.1.2 | DisplayString | RO | ||||||||||
column · DisplayString · read-only · current Detailed information of a nearby AP. | |||||||||||||
| CnearbyApBSSID | 1.3.6.1.4.1.4329.15.3.5.2.9.1.3 | OCTET STRING (SIZE (17)) | RO | ||||||||||
column · OCTET STRING (SIZE (17)) · read-only · current The BSSID of a nearby AP. | |||||||||||||
| CnearbyApChannel | 1.3.6.1.4.1.4329.15.3.5.2.9.1.4 | DisplayString | RO | ||||||||||
column · DisplayString · read-only · current The operating radio channel of a nearby AP. | |||||||||||||
| CnearbyApRSS | 1.3.6.1.4.1.4329.15.3.5.2.9.1.5 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current The Received Signal Strength of a nearby AP. | |||||||||||||
| NsensorManagement | 1.3.6.1.4.1.4329.15.3.5.3 | ||||||||||||
| StftpSever | 1.3.6.1.4.1.4329.15.3.5.3.1 | DisplayString | RW | ||||||||||
scalar · DisplayString · read-write · current TFTP server that sensor image resides. | |||||||||||||
| SimagePath26xx | 1.3.6.1.4.1.4329.15.3.5.3.2 | DisplayString | RW | ||||||||||
scalar · DisplayString · read-write · current Path of sensor image on TFTP server. | |||||||||||||
| SimagePath36xx | 1.3.6.1.4.1.4329.15.3.5.3.3 | DisplayString | RW | ||||||||||
scalar · DisplayString · read-write · current Path of sensor image on TFTP server. | |||||||||||||
| SimageVersionOfap26xx | 1.3.6.1.4.1.4329.15.3.5.3.4 | DisplayString | RW | ||||||||||
scalar · DisplayString · read-write · current Sensor's software version. | |||||||||||||
| SimageVersionOfngap36xx | 1.3.6.1.4.1.4329.15.3.5.3.5 | DisplayString | RW | ||||||||||
scalar · DisplayString · read-write · current Sensor's softerware version for Next Generation Access Point. | |||||||||||||
| NapRegistration | 1.3.6.1.4.1.4329.15.3.5.4 | ||||||||||||
| SapRegSecurityMode | 1.3.6.1.4.1.4329.15.3.5.4.1 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Indicates registration mode for an AP. If allowAll(1), then all wireless APs are allowed to register to the controlloer, otherwise only approved APs in 'Approved AP' list are allowed to register to the controller.
| |||||||||||||
| SapRegDiscoveryRetries | 1.3.6.1.4.1.4329.15.3.5.4.2 | Unsigned32 (1..255) | RW | ||||||||||
scalar · Unsigned32 (1..255) · read-write · current Number of retries for discovery requests from an access point to controller. After these number of retries, the access point will start over again after some arbitrary delays. | |||||||||||||
| SapRegDiscoveryInterval | 1.3.6.1.4.1.4329.15.3.5.4.3 | Unsigned32 (1..10) | RW | ||||||||||
scalar · Unsigned32 (1..10) · read-write · current Interval between two consecutive discovery requests from the same access point.
| |||||||||||||
| SapRegTelnetPassword | 1.3.6.1.4.1.4329.15.3.5.4.4 | OCTET STRING | RW | ||||||||||
scalar · OCTET STRING · read-write · current Password used to access an AP via telnet. This field is write-only and read access returns empty string. | |||||||||||||
| SapRegSSHPassword | 1.3.6.1.4.1.4329.15.3.5.4.5 | OCTET STRING | RW | ||||||||||
scalar · OCTET STRING · read-write · current SSH password used to access an access point. This field is write-only and read access returns empty string. | |||||||||||||
| SapRegUseClusterEncryption | 1.3.6.1.4.1.4329.15.3.5.4.6 | TruthValue | RW | ||||||||||
scalar · TruthValue · read-write · current If this field set to true, then all APs in the cluster use cluster encryption. | |||||||||||||
| SapRegClusterSharedSecret | 1.3.6.1.4.1.4329.15.3.5.4.7 | OCTET STRING | RW | ||||||||||
scalar · OCTET STRING · read-write · current Password for cluster encryption. This field is write-only and read access returns empty string. | |||||||||||||
| NloadBalancing | 1.3.6.1.4.1.4329.15.3.5.5 | ||||||||||||
| TloadGroupTable | 1.3.6.1.4.1.4329.15.3.5.5.1 | NA | |||||||||||
table · not-accessible · current Table of configured load groups for access points. A set of access points can be grouped together and they are identified by unique name. An access point can only be assigned to one group. | |||||||||||||
| RloadGroupEntry | 1.3.6.1.4.1.4329.15.3.5.5.1.1 | NA | |||||||||||
row · not-accessible · current An entry containing definition of a load group. There exists two types of load group: client-balancing-group and radio-balancing-group.
| |||||||||||||
| CloadGroupID | 1.3.6.1.4.1.4329.15.3.5.5.1.1.1 | Unsigned32 | RO | ||||||||||
column · Unsigned32 · read-only · current Internally generated ID for a group and cannot be changed externally. | |||||||||||||
| CloadGroupName | 1.3.6.1.4.1.4329.15.3.5.5.1.1.2 | DisplayString (SIZE (1..32)) | RW | ||||||||||
column · DisplayString (SIZE (1..32)) · read-write · current Unique name assigned to the group. | |||||||||||||
| CloadGroupType | 1.3.6.1.4.1.4329.15.3.5.5.1.1.3 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Type of load balancing this group supports.
| |||||||||||||
| CloadGroupBandPreference | 1.3.6.1.4.1.4329.15.3.5.5.1.1.4 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Band preference is enabled for this group if this field is set to true and group type is set to radioBalancing(1).
| |||||||||||||
| CloadGroupLoadControl | 1.3.6.1.4.1.4329.15.3.5.5.1.1.5 | INTEGER | RW | deprecated | |||||||||
column · INTEGER · read-write · deprecated Load balancing is enabled for this group if this field is set to true and group type is set to radioBalancing(1).
| |||||||||||||
| CloadGroupClientCountRadio1 | 1.3.6.1.4.1.4329.15.3.5.5.1.1.6 | Unsigned32 (5..60 | 121) | RW | ||||||||||
column · Unsigned32 (5..60 | 121) · read-write · current Maximum number of client on this radio. This field is only applicable to a group with radioBalancing(1) type. | |||||||||||||
| CloadGroupClientCountRadio2 | 1.3.6.1.4.1.4329.15.3.5.5.1.1.7 | Unsigned32 (5..60 | 121) | RW | ||||||||||
column · Unsigned32 (5..60 | 121) · read-write · current Maximum number of client on this radio. This field is only applicable to a group with radioBalancing(1) type. | |||||||||||||
| CloadGroupLoadControlEnableR1 | 1.3.6.1.4.1.4329.15.3.5.5.1.1.8 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current If it is enabled then load control is applicable to radio #1 of all access points that are assigned to this load group. This field has meaning only for the load group that is of radioBalancing(1) type.
| |||||||||||||
| CloadGroupLoadControlEnableR2 | 1.3.6.1.4.1.4329.15.3.5.5.1.1.9 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current If it is enabled then load control is applicable to radio #2 of all access points that are assigned to this load group. This field has meaning only for the load group that is of radioBalancing(1) type.
| |||||||||||||
| CloadGroupLoadControlStrictLimitR1 | 1.3.6.1.4.1.4329.15.3.5.5.1.1.10 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current If it is enabled then strict limit for load control is applicable to radio #1 of all access points that are assigned to this load group. This field has meaning only for the load group that is of radioBalancing(1) type.
| |||||||||||||
| CloadGroupLoadControlStrictLimitR2 | 1.3.6.1.4.1.4329.15.3.5.5.1.1.11 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current If it is enabled then strict limit for load control is applicable to radio #2 of all access points that are assigned to this load group. This field has meaning only for the load group that is of radioBalancing(1) type.
| |||||||||||||
| TloadGrpRadiosTable | 1.3.6.1.4.1.4329.15.3.5.5.2 | NA | |||||||||||
table · not-accessible · current Table of radio assignment to defined load groups. | |||||||||||||
| RloadGrpRadiosEntry | 1.3.6.1.4.1.4329.15.3.5.5.2.1 | NA | |||||||||||
row · not-accessible · current Any entry defining radio assignment of AP, identified by apIndex, to a load group identified by loadGroupID.
| |||||||||||||
| CloadGrpRadiosRadio1 | 1.3.6.1.4.1.4329.15.3.5.5.2.1.2 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current If this field is set to 'assigned(1)', then the radio of the AP identified by the apIndex is a member of the load balancing group identified by the loadBlanaceID. For radio blanacing group, either all or none of the radios of a specific AP (indentified by apIndex) are assigned to the load balancing group.
| |||||||||||||
| CloadGrpRadiosRadio2 | 1.3.6.1.4.1.4329.15.3.5.5.2.1.3 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current If this field is set to 'assigned(2)', then the radio of the AP identified by the apIndex is a member of the load balancing group identified by the loadBlanaceID. For radio blanacing group, either all or none of the radios of a specific AP (indentified by apIndex) are assigned to the load balancing group.
| |||||||||||||
| TloadGrpWlanTable | 1.3.6.1.4.1.4329.15.3.5.5.3 | NA | |||||||||||
table · not-accessible · current Table of WLAN assignment to defined load groups. | |||||||||||||
| RloadGrpWlanEntry | 1.3.6.1.4.1.4329.15.3.5.5.3.1 | NA | |||||||||||
row · not-accessible · current An entry defining WLAN, identified by wlanID, assignment to a load group identified by loadGroupID.
| |||||||||||||
| CloadGrpWlanAssigned | 1.3.6.1.4.1.4329.15.3.5.5.3.1.1 | TruthValue | RW | ||||||||||
column · TruthValue · read-write · current Assignement of WLAN, identified with wlanID, to the load balancing group identified bye loadGroupID. | |||||||||||||
| NapMaintenanceCycle | 1.3.6.1.4.1.4329.15.3.5.6 | ||||||||||||
| Sschedule | 1.3.6.1.4.1.4329.15.3.5.6.1 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current AP maintenance schedule options. 0 : never perform the maintenance action. 1 : perform the maintenance action every day. 2 : perform the maintenance action every week. 3 : perform the maintenance action every month.
| |||||||||||||
| SstartHour | 1.3.6.1.4.1.4329.15.3.5.6.2 | Integer32 (0..23) | RW | ||||||||||
scalar · Integer32 (0..23) · read-write · current Maintenance action starts at this hour of the day. | |||||||||||||
| SstartMinute | 1.3.6.1.4.1.4329.15.3.5.6.3 | Integer32 (0..59) | RW | ||||||||||
scalar · Integer32 (0..59) · read-write · current Maintenance action starts at this minute of the hour. | |||||||||||||
| Sduration | 1.3.6.1.4.1.4329.15.3.5.6.4 | Integer32 (1..23) | RW | ||||||||||
scalar · Integer32 (1..23) · read-write · current Duration of the AP maintenance cycle (how often maintenance is done) in hours. | |||||||||||||
| SrecurrenceDaily | 1.3.6.1.4.1.4329.15.3.5.6.5 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current This field has meaning only when the maintenance schedule option is set to daily(1). Below is the recurrence option. 0 : every day. 1 : every weekday. 2 : every weekend.
| |||||||||||||
| SrecurrenceWeekly | 1.3.6.1.4.1.4329.15.3.5.6.6 | Bits | RW | ||||||||||
scalar · Bits · read-write · current This field has meaning only when the maintenance schedule option is set to weekly(2). Below are the recurrence options. BIT 0 : Sunday. BIT 1 : Monday. BIT 2 : Tuesday. BIT 3 : Wednesday. BIT 4 : Thursday. BIT 5 : Friday. BIT 6 : Saturday.
| |||||||||||||
| SrecurrenceMonthly | 1.3.6.1.4.1.4329.15.3.5.6.7 | Bits | RW | ||||||||||
scalar · Bits · read-write · current This field has meaning only when the maintenance schedule option is set to monthly(3). Below are the recurrence options. BIT 0 : the first week of the month. BIT 1 : the second week of the month. BIT 2 : the third week of the month. BIT 3 : the fourth week of the month. BIT 4 : the fifth week of the month. BIT 5 : sunday of the week. BIT 6 : monday of the week. BIT 7 : tuesday of the week. BIT 8 : wednesday of the week. BIT 9 : thursday of the week. BIT 10 : friday of the week. BIT 11 : saturday of the week.
| |||||||||||||
| SapPlatforms | 1.3.6.1.4.1.4329.15.3.5.6.8 | Bits | RW | ||||||||||
scalar · Bits · read-write · current Select which models of the AP platforms to perform the maintenance. BIT 0 : AP2600 platform. BIT 1 : AP2605 platform. BIT 2 : AP2650 platform. BIT 3 : AP4102 platform. BIT 4 : W786 platform. BIT 5 : AP3705 platform. BIT 6 : AP3710 platform. BIT 7 : AP3715 platform. BIT 8 : AP3765 platform. BIT 9 : AP3767 platform. BIT 10 : AP3801 platform. BIT 11 : AP3805 platform. BIT 12 : AP3825 platform. BIT 13 : AP3865 platform. BIT 14 : AP3935 platform. BIT 15 : AP3965 platform. BIT 16 : W78XC platform. BIT 17 : W78XCSFP platform.
| |||||||||||||
| NmobileUnits | 1.3.6.1.4.1.4329.15.3.6 | ||||||||||||
| SmobileUnitCount | 1.3.6.1.4.1.4329.15.3.6.1 | Integer32 | RW | 10 | |||||||||
scalar · Integer32 · read-write · current Number of clients associated with the controller. Example values from LibreNMS test devices
| |||||||||||||
| TmuTable | 1.3.6.1.4.1.4329.15.3.6.2 | NA | |||||||||||
table · not-accessible · current Table of information for clients associated with the EWC. | |||||||||||||
| RmuEntry | 1.3.6.1.4.1.4329.15.3.6.2.1 | NA | |||||||||||
| CmuMACAddress | 1.3.6.1.4.1.4329.15.3.6.2.1.1 | MacAddress | RO | ||||||||||
column · MacAddress · read-only · current Client MAC address. | |||||||||||||
| CmuIPAddress | 1.3.6.1.4.1.4329.15.3.6.2.1.2 | IpAddress | RO | ||||||||||
column · IpAddress · read-only · current Client IP Address. | |||||||||||||
| CmuUser | 1.3.6.1.4.1.4329.15.3.6.2.1.3 | OCTET STRING | RO | ||||||||||
column · OCTET STRING · read-only · current Client login name. | |||||||||||||
| CmuState | 1.3.6.1.4.1.4329.15.3.6.2.1.4 | TruthValue | RO | ||||||||||
column · TruthValue · read-only · current True if the client is authenticated. | |||||||||||||
| CmuAPSerialNo | 1.3.6.1.4.1.4329.15.3.6.2.1.5 | OCTET STRING | RO | ||||||||||
column · OCTET STRING · read-only · current Serial Number of the Access Point the client is associated with. | |||||||||||||
| CmuVnsSSID | 1.3.6.1.4.1.4329.15.3.6.2.1.6 | OCTET STRING | RO | ||||||||||
column · OCTET STRING · read-only · current SSID of the VNS the client is associated with. | |||||||||||||
| CmuTxPackets | 1.3.6.1.4.1.4329.15.3.6.2.1.7 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current Number of packets trasmitted to the client. | |||||||||||||
| CmuRxPackets | 1.3.6.1.4.1.4329.15.3.6.2.1.8 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current Number of packets received from the client. | |||||||||||||
| CmuTxOctets | 1.3.6.1.4.1.4329.15.3.6.2.1.9 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current Number of octets transmitted to the client. | |||||||||||||
| CmuRxOctets | 1.3.6.1.4.1.4329.15.3.6.2.1.10 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current Number of octets received from the client. | |||||||||||||
| CmuDuration | 1.3.6.1.4.1.4329.15.3.6.2.1.11 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current Time client has been associated with the EWC. | |||||||||||||
| CmuAPName | 1.3.6.1.4.1.4329.15.3.6.2.1.12 | DisplayString | RO | ||||||||||
column · DisplayString · read-only · current Name of the Access Point the client is associated with. | |||||||||||||
| CmuTopologyName | 1.3.6.1.4.1.4329.15.3.6.2.1.13 | DisplayString | RO | ||||||||||
column · DisplayString · read-only · current Topology name that the MU is associated with. | |||||||||||||
| CmuPolicyName | 1.3.6.1.4.1.4329.15.3.6.2.1.14 | DisplayString | RO | ||||||||||
column · DisplayString · read-only · current The name of the policy that provides filter for this MU. | |||||||||||||
| CmuDefaultCoS | 1.3.6.1.4.1.4329.15.3.6.2.1.15 | DisplayString | RO | ||||||||||
column · DisplayString · read-only · current The CoS that is applied to the current traffic if the defined rule for the current traffic has not specifically defined any CoS. | |||||||||||||
| CmuConnectionProtocol | 1.3.6.1.4.1.4329.15.3.6.2.1.16 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current The MU is using this connection protocol for current connection. Symbols notation: n50 = an = n5.0Ghz, n24 = bgn = n2.4Ghz
| |||||||||||||
| CmuConnectionCapability | 1.3.6.1.4.1.4329.15.3.6.2.1.17 | INTEGER | RO | deprecated | |||||||||
column · INTEGER · read-only · deprecated This field indicates what are the MU connection capability.
| |||||||||||||
| CmuWLANID | 1.3.6.1.4.1.4329.15.3.6.2.1.18 | Unsigned32 | RO | ||||||||||
column · Unsigned32 · read-only · current ID of the WLAN that the MU is associated with. | |||||||||||||
| CmuBSSIDMac | 1.3.6.1.4.1.4329.15.3.6.2.1.19 | MacAddress | RO | ||||||||||
column · MacAddress · read-only · current Client BSSID MAC address. | |||||||||||||
| CmuDot11ConnectionCapability | 1.3.6.1.4.1.4329.15.3.6.2.1.20 | Bits | RW | ||||||||||
column · Bits · read-write · current This field indicates what are the MU connection capabilities.
bit 0 : If this bit is set, the client is capable to tx/rx on A radio.
bit 1 : If this bit is set, the client is capable to tx/rx on BG radio.
bit 2 : If this bit is set, the client is capable of wpaV1 privacy.
bit 3 : If this bit is set, the client is capable of wpaV2 privacy.
bit 4 : If this bit is set, the client is capable to comunicate with 1 data stream.
bit 5 : If this bit is set, the client is capable to comunicate with 2 data streams.
bit 6 : If this bit is set, the client is capable to comunicate with 3 data streams.
bit 7 : If this bit is set, the client is capable of Unscheduled automatic power-save delivery (U-APSD) benefits.
The voice client can synchronize the transmission and reception of voice frames with the AP.
bit 8 : If this bit is set, the client is capable of Unscheduled automatic power-save delivery (U-APSD) benefits.
The video client can synchronize the transmission and reception of video frames with the AP.
bit 9 : If this bit is set, the client is capable of Unscheduled automatic power-save delivery (U-APSD) benefits.
The client can synchronize the transmission and reception in background queue.
bit 10 : If this bit is set, the client is capable of Unscheduled automatic power-save delivery (U-APSD) benefits.
The client can synchronize the transmission and reception in best effort queue.
bit 11 : If this bit is set, the client is capable of Wi-Fi Multimedia(WMM) power save.
bit 12 : If this bit is set, the client is capable of 802.11n Greenfield mode.
bit 13 : If this bit is set, the client is on fast-transition mode.
| |||||||||||||
| TmuTSPECTable | 1.3.6.1.4.1.4329.15.3.6.3 | NA | |||||||||||
table · not-accessible · current Table of information for Admission Control Statistics by active client. | |||||||||||||
| RmuTSPECEntry | 1.3.6.1.4.1.4329.15.3.6.3.1 | NA | |||||||||||
row · not-accessible · current Information for Admission Control Statistics by active client.
| |||||||||||||
| CtspecMuMACAddress | 1.3.6.1.4.1.4329.15.3.6.3.1.1 | MacAddress | RO | ||||||||||
column · MacAddress · read-only · current Client MAC address. | |||||||||||||
| CtspecAC | 1.3.6.1.4.1.4329.15.3.6.3.1.2 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current Access Category, such as Best Effort, Background, Voice, Video, and Reserved.
| |||||||||||||
| CtspecDirection | 1.3.6.1.4.1.4329.15.3.6.3.1.3 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current Traffic direction, such as uplink direction, downlink direction.
| |||||||||||||
| CtspecApSerialNumber | 1.3.6.1.4.1.4329.15.3.6.3.1.4 | OCTET STRING | RO | ||||||||||
column · OCTET STRING · read-only · current 16-character serial number of the AccessPoint. | |||||||||||||
| CtspecMuIPAddress | 1.3.6.1.4.1.4329.15.3.6.3.1.5 | IpAddress | RO | ||||||||||
column · IpAddress · read-only · current Client IP Address. | |||||||||||||
| CtspecBssMac | 1.3.6.1.4.1.4329.15.3.6.3.1.6 | MacAddress | RO | ||||||||||
column · MacAddress · read-only · current Access Point BSSID. | |||||||||||||
| CtspecSsid | 1.3.6.1.4.1.4329.15.3.6.3.1.7 | DisplayString | RO | ||||||||||
column · DisplayString · read-only · current VNS SSID. | |||||||||||||
| CtspecMDR | 1.3.6.1.4.1.4329.15.3.6.3.1.8 | Unsigned32 | RO | ||||||||||
column · Unsigned32 · read-only · current Mean Data Rate (bytes per second). | |||||||||||||
| CtspecNMS | 1.3.6.1.4.1.4329.15.3.6.3.1.9 | Unsigned32 | RO | ||||||||||
column · Unsigned32 · read-only · current Nominal MSDU size (bytes). | |||||||||||||
| CtspecSBA | 1.3.6.1.4.1.4329.15.3.6.3.1.10 | Unsigned32 | RO | ||||||||||
column · Unsigned32 · read-only · current Surplus Bandwidth Allowance. | |||||||||||||
| CtspecDlRate | 1.3.6.1.4.1.4329.15.3.6.3.1.11 | DisplayString | RO | ||||||||||
column · DisplayString · read-only · current Downlink Rate (bytes per second). | |||||||||||||
| CtspecUlRate | 1.3.6.1.4.1.4329.15.3.6.3.1.12 | DisplayString | RO | ||||||||||
column · DisplayString · read-only · current Uplink Rate (bytes per second). | |||||||||||||
| CtspecDlViolations | 1.3.6.1.4.1.4329.15.3.6.3.1.13 | DisplayString | RO | ||||||||||
column · DisplayString · read-only · current Downlink Violations (bytes per second). | |||||||||||||
| CtspecUlViolations | 1.3.6.1.4.1.4329.15.3.6.3.1.14 | DisplayString | RO | ||||||||||
column · DisplayString · read-only · current Uplink Violations (bytes per second). | |||||||||||||
| CtspecProtocol | 1.3.6.1.4.1.4329.15.3.6.3.1.15 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current 802.11 radio protocol.
| |||||||||||||
| SmuACLType | 1.3.6.1.4.1.4329.15.3.6.4 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current MUs can access EWC by sending association request and providing proper credentials. However, EWC allows creation of a master list of a blacklist or a whitelist group to control such access. There can exist only a blacklist or a whitelist (mutually exclusive) at any time. The list of MUs belonging to such a list is populated in muACLTable. The muACLTable content can be interpreted in conjunction with this field as follows: - blacklist(1): MUs listed in muACLTable cannot access EWC resources. - whitelist(2): Only MUs listed in muACLTable can access EWC resources.
| |||||||||||||
| TmuACLTable | 1.3.6.1.4.1.4329.15.3.6.5 | NA | |||||||||||
table · not-accessible · current Semantics of this list is directly related to muACLType. Access Control List(ACL) is list of MUs and their access rights. An MU can either belong to 'Blacklist', in that case its association request is denied, or it can belong to 'Whitelist', in that case it is allowed to associate to EWC provided having proper credentials. | |||||||||||||
| RmuACLEntry | 1.3.6.1.4.1.4329.15.3.6.5.1 | NA | |||||||||||
| CmuACLMACAddress | 1.3.6.1.4.1.4329.15.3.6.5.1.1 | MacAddress | RO | ||||||||||
column · MacAddress · read-only · current MAC address of MU. | |||||||||||||
| CmuACLRowStatus | 1.3.6.1.4.1.4329.15.3.6.5.1.2 | RowStatus | RC | ||||||||||
column · RowStatus · read-create · current An MU can either be added or removed to this list, therefore, allowed set values for this field are: createAndGo, destroy. | |||||||||||||
| TmuAccessListTable | 1.3.6.1.4.1.4329.15.3.6.6 | NA | |||||||||||
table · not-accessible · current Semantics of this list is directly related to muACLType. Access List Control(ACL) list of MUs and their access rights. An MU can either belong to 'Blacklist', in that case its association request is denied, or it can belong to 'Whitelist', in that case it is allowed to associate to EWC provided having proper credentials. | |||||||||||||
| RmuAccessListEntry | 1.3.6.1.4.1.4329.15.3.6.6.1 | NA | |||||||||||
| CmuAccessListMACAddress | 1.3.6.1.4.1.4329.15.3.6.6.1.1 | MacAddress | RO | ||||||||||
column · MacAddress · read-only · current MAC address of MU. | |||||||||||||
| CmuAccessListBitmaskLength | 1.3.6.1.4.1.4329.15.3.6.6.1.2 | INTEGER | RC | ||||||||||
column · INTEGER · read-create · current Length of bitmask associated to the MAC address in the entry.
| |||||||||||||
| CmuAccessListRowStatus | 1.3.6.1.4.1.4329.15.3.6.6.1.3 | RowStatus | RC | ||||||||||
column · RowStatus · read-create · current An MU can either be added or removed to this list, therefore, allowed set values for this field are: createAndGo, destroy. | |||||||||||||
| Nassociations | 1.3.6.1.4.1.4329.15.3.7 | ||||||||||||
| SassocCount | 1.3.6.1.4.1.4329.15.3.7.1 | Integer32 | RW | ||||||||||
scalar · Integer32 · read-write · current Total number of current client associations to the access point. | |||||||||||||
| TassocTable | 1.3.6.1.4.1.4329.15.3.7.2 | NA | |||||||||||
table · not-accessible · current Table of information about clients associated with the access point. | |||||||||||||
| RassocEntry | 1.3.6.1.4.1.4329.15.3.7.2.1 | NA | |||||||||||
row · not-accessible · current Information for a single client in the association table. | |||||||||||||
| CassocMUMacAddress | 1.3.6.1.4.1.4329.15.3.7.2.1.1 | MacAddress | RO | ||||||||||
column · MacAddress · read-only · current MAC address of the client. | |||||||||||||
| CassocStartSysUpTime | 1.3.6.1.4.1.4329.15.3.7.2.1.2 | TimeTicks | RO | ||||||||||
column · TimeTicks · read-only · current The system uptime that client became associated with the access point. | |||||||||||||
| CassocTxPackets | 1.3.6.1.4.1.4329.15.3.7.2.1.3 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current Nubmer of tx packets to the client. | |||||||||||||
| CassocRxPackets | 1.3.6.1.4.1.4329.15.3.7.2.1.4 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current Number of received packets from the client. | |||||||||||||
| CassocTxOctets | 1.3.6.1.4.1.4329.15.3.7.2.1.5 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current Number of octets sent to the client. | |||||||||||||
| CassocRxOctets | 1.3.6.1.4.1.4329.15.3.7.2.1.6 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current Number of octets received from the client. | |||||||||||||
| CassocDuration | 1.3.6.1.4.1.4329.15.3.7.2.1.7 | Integer32 | RW | ||||||||||
column · Integer32 · read-write · current Length of time since last association. | |||||||||||||
| CassocVnsIfIndex | 1.3.6.1.4.1.4329.15.3.7.2.1.8 | InterfaceIndex | RO | ||||||||||
column · InterfaceIndex · read-only · current Index of VNS to which the MU is associated with. | |||||||||||||
| Nprotocols | 1.3.6.1.4.1.4329.15.3.8 | ||||||||||||
| Nwassp | 1.3.6.1.4.1.4329.15.3.8.1 | ||||||||||||
| NlogNotifications | 1.3.6.1.4.1.4329.15.3.9 | ||||||||||||
| SlogEventSeverityThreshold | 1.3.6.1.4.1.4329.15.3.9.1 | LogEventSeverity | RW | ||||||||||
scalar · LogEventSeverity · read-write · current Specifies the minimum level at which the SNMP agent will send notifications for log events. I.e., setting this value to 'major' will send notifcations for critical and major log events. Setting the threshold to minor will trap critical, major, and minor events. | |||||||||||||
| SlogEventSeverity | 1.3.6.1.4.1.4329.15.3.9.3 | LogEventSeverity | RO | ||||||||||
scalar · LogEventSeverity · read-only · current Contains the severity of the most recently trapped hiPathWirelessLogAlarm notification. | |||||||||||||
| SlogEventComponent | 1.3.6.1.4.1.4329.15.3.9.4 | OCTET STRING | RO | ||||||||||
scalar · OCTET STRING · read-only · current Contains the component which sent the most recently trapped hiPathWirelessLogAlarm notification. | |||||||||||||
| SlogEventDescription | 1.3.6.1.4.1.4329.15.3.9.5 | OCTET STRING | RO | ||||||||||
scalar · OCTET STRING · read-only · current Contains the description of the most recently trapped hiPathWirelessLogAlarm. | |||||||||||||
| !hiPathWirelessLogAlarm | 1.3.6.1.4.1.4329.15.3.9.6 | ||||||||||||
notification · current Components of an alarm. | |||||||||||||
| Nsites | 1.3.6.1.4.1.4329.15.3.10 | ||||||||||||
| SsiteMaxEntries | 1.3.6.1.4.1.4329.15.3.10.1 | Unsigned32 | RO | ||||||||||
scalar · Unsigned32 · read-only · current The maximum number of entries allowed in the siteTable. This value is platform dependent. | |||||||||||||
| SsiteNumEntries | 1.3.6.1.4.1.4329.15.3.10.2 | Unsigned32 | RO | ||||||||||
scalar · Unsigned32 · read-only · current The current number of entries in the siteTable. | |||||||||||||
| SsiteTableNextAvailableIndex | 1.3.6.1.4.1.4329.15.3.10.3 | Unsigned32 | RO | ||||||||||
scalar · Unsigned32 · read-only · current This object indicates the numerically lowest available index within this entity, which may be used for the value of siteID in the creation of a new entry in the siteTable. An index is considered available if the index value falls within the range of 1 to siteMaxEntries value and is not being used to index an existing entry in the siteTable contained within this entity. This value should only be considered a guideline for management creation of siteEntries, there is no requirement on management to create entries based upon this index value. | |||||||||||||
| TsiteTable | 1.3.6.1.4.1.4329.15.3.10.4 | NA | |||||||||||
table · not-accessible · current A site is a logical entity that is constituted by collection of APs, CoS rules, policies, Radius server, WLAN, etc. A site is identified by a unique name. | |||||||||||||
| RsiteEntry | 1.3.6.1.4.1.4329.15.3.10.4.1 | NA | |||||||||||
| CsiteID | 1.3.6.1.4.1.4329.15.3.10.4.1.1 | Unsigned32 | RO | ||||||||||
column · Unsigned32 · read-only · current An unique ID, identifying the site in the context of the controller. The site ID can be an integer value from 1 to the maximum number of APs supported by the EWC. | |||||||||||||
| CsiteRowStatus | 1.3.6.1.4.1.4329.15.3.10.4.1.2 | RowStatus | RC | ||||||||||
column · RowStatus · read-create · current Row status for the entry. | |||||||||||||
| CsiteName | 1.3.6.1.4.1.4329.15.3.10.4.1.3 | DisplayString (SIZE (1..64)) | RC | ||||||||||
column · DisplayString (SIZE (1..64)) · read-create · current Textual description to identify the site in the context of the controller. | |||||||||||||
| CsiteLocalRadiusAuthentication | 1.3.6.1.4.1.4329.15.3.10.4.1.4 | TruthValue | RC | ||||||||||
column · TruthValue · read-create · current If this value is set to true, then the RADIUS client is on APs, otherwise the RADIUS client is on controller. | |||||||||||||
| CsiteDefaultDNSServer | 1.3.6.1.4.1.4329.15.3.10.4.1.5 | DisplayString (SIZE (0..64)) | RC | ||||||||||
column · DisplayString (SIZE (0..64)) · read-create · current If the APs associated to the site uses DHCP, and DHCP server does not assign DNS server, then this entry will be used for that purpose. Otherwise, if AP is configured with static IP address, then this entry will be used for that purpose. | |||||||||||||
| CsiteEnableSecureTunnel | 1.3.6.1.4.1.4329.15.3.10.4.1.6 | TruthValue | RC | ||||||||||
column · TruthValue · read-create · current If set to true secure communication key sent to APs to be used to encrypt the traffic between APs within the site and the traffic between controller and APs. However, the encryption itself does not take place unless siteEncryptCommAPtoController and/or siteEncryptCommBetweenAPs set to true. | |||||||||||||
| CsiteEncryptCommAPtoController | 1.3.6.1.4.1.4329.15.3.10.4.1.7 | TruthValue | RC | ||||||||||
column · TruthValue · read-create · current If set to true, communication between APs within the site and the controller are encrypted using defined encyption. For details about encryption type, please refer to user manual. | |||||||||||||
| CsiteEncryptCommBetweenAPs | 1.3.6.1.4.1.4329.15.3.10.4.1.8 | TruthValue | RC | ||||||||||
column · TruthValue · read-create · current If set to true, communication between APs within the site are encrypted using defined encyption. For details about encryption type, please refer to user manual. | |||||||||||||
| CsiteBandPreferenceEnable | 1.3.6.1.4.1.4329.15.3.10.4.1.9 | INTEGER | RC | ||||||||||
column · INTEGER · read-create · current Enabling/disabling band preference for the site and associated APs. By enabling band preference 11a-capable clients can be moved to 11a radio and relieve the congestion on the 11g radio. Band preference provides radio load balancing between 11g and 11a radios.
| |||||||||||||
| CsiteLoadControlEnableR1 | 1.3.6.1.4.1.4329.15.3.10.4.1.10 | INTEGER | RC | ||||||||||
column · INTEGER · read-create · current Enabling/disabling load control for the site for this radio. Load control manages the number of clients on the Radio #1 by disallowing additional clients on the radio above the configured radio limit.
| |||||||||||||
| CsiteLoadControlEnableR2 | 1.3.6.1.4.1.4329.15.3.10.4.1.11 | INTEGER | RC | ||||||||||
column · INTEGER · read-create · current Enabling/disabling load control for the site for this radio. Load control manages the number of clients on the Radio #2 by disallowing additional clients on the radio above the configured radio limit.
| |||||||||||||
| CsiteMaxClientR1 | 1.3.6.1.4.1.4329.15.3.10.4.1.12 | Unsigned32 (0..99) | RC | ||||||||||
column · Unsigned32 (0..99) · read-create · current Maximum number of clients that are allowed to be associated to this radio (radio #1). If the Load Control is not enabled then the maximum for this radio uses default value. | |||||||||||||
| CsiteMaxClientR2 | 1.3.6.1.4.1.4329.15.3.10.4.1.13 | Unsigned32 (0..99) | RC | ||||||||||
column · Unsigned32 (0..99) · read-create · current Maximum number of clients that are allowed to be associated to this radio (radio #2). If the Load Control is not enabled then the maximum for this radio uses default value. | |||||||||||||
| CsiteStrictLimitEnableR1 | 1.3.6.1.4.1.4329.15.3.10.4.1.14 | INTEGER | RC | ||||||||||
column · INTEGER · read-create · current Enabling/disabling strict limit of load control for this radio that is assigned to the site. Eanbleing strict limit enforces configured client limit for the radio (radio #1) in any circumstances. Otherwise if this field is disabled then the restriction may not be enforced in all circumstances.
| |||||||||||||
| CsiteStrictLimitEnableR2 | 1.3.6.1.4.1.4329.15.3.10.4.1.15 | INTEGER | RC | ||||||||||
column · INTEGER · read-create · current Enabling/disabling strict limit of load control for this radio that is assigned to the site. Eanbleing strict limit enforces configured client limit for the radio (radio #2) in any circumstances. Otherwise if this field is disabled then the restriction may not be enforced in all circumstances.
| |||||||||||||
| CsiteReplaceStnIDwithSiteName | 1.3.6.1.4.1.4329.15.3.10.4.1.16 | TruthValue | RC | ||||||||||
column · TruthValue · read-create · current If this value is set to true, then the called station ID will be replaced with the site name. | |||||||||||||
| TsitePolicyTable | 1.3.6.1.4.1.4329.15.3.10.5 | NA | |||||||||||
table · not-accessible · current Each site can have zero or more policies assigned to it. All policies associated to a site are pushed to the all APs belonging to the site. This table defines the assignment of various policies to various sites. | |||||||||||||
| RsitePolicyEntry | 1.3.6.1.4.1.4329.15.3.10.5.1 | NA | |||||||||||
row · not-accessible · current An entry defining assignment of a policy, identified by sitePolicyID, to a site, identified by siteID.
| |||||||||||||
| CsitePolicyID | 1.3.6.1.4.1.4329.15.3.10.5.1.1 | Unsigned32 | NA | ||||||||||
column · Unsigned32 · not-accessible · current The policy index, as defined ENTERASYS-POLICY-PROFILE-MIB::etsysPolicyProfileIndex. | |||||||||||||
| CsitePolicyMember | 1.3.6.1.4.1.4329.15.3.10.5.1.2 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Indicates whether the policy associated with this row is a member of the zone identified by zoneID.
| |||||||||||||
| TsiteCosTable | 1.3.6.1.4.1.4329.15.3.10.6 | NA | |||||||||||
table · not-accessible · current Each site can have zero or more CoS assigned to it. All CoS associated to a site are pushed to the all APs belonging to the site. This table defines the assignment of various CoS to various sites. | |||||||||||||
| RsiteCosEntry | 1.3.6.1.4.1.4329.15.3.10.6.1 | NA | |||||||||||
| CsiteCoSID | 1.3.6.1.4.1.4329.15.3.10.6.1.1 | Unsigned32 | NA | ||||||||||
column · Unsigned32 · not-accessible · current The CoS index, as defined in ENTERASYS-POLICY-PROFILE-MIB::etsysCosIndex. | |||||||||||||
| CsiteCoSMember | 1.3.6.1.4.1.4329.15.3.10.6.1.2 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current Indicates whether the CoS associated with this row is a member of the site identified by siteID.
| |||||||||||||
| TsiteAPTable | 1.3.6.1.4.1.4329.15.3.10.7 | NA | |||||||||||
table · not-accessible · current A site can have zero or more Access Points(AP) assigned to it. This table defines the assignment of various APs to various sites. | |||||||||||||
| RsiteAPEntry | 1.3.6.1.4.1.4329.15.3.10.7.1 | NA | |||||||||||
| CsiteAPMember | 1.3.6.1.4.1.4329.15.3.10.7.1.1 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Indicates whether the AP associated with this row is a member of the site identified by siteID.
| |||||||||||||
| TsiteWlanTable | 1.3.6.1.4.1.4329.15.3.10.8 | NA | |||||||||||
table · not-accessible · current A site can have zero or more WLAN assigned to it. All WLANs that are associated with a site are pushed to the all APs belonging to the site. This table defines the assignment of various WLANs to various sites. | |||||||||||||
| RsiteWlanEntry | 1.3.6.1.4.1.4329.15.3.10.8.1 | NA | |||||||||||
row · not-accessible · current An entry defining assignment of a WLAN identified by siteWlanID, to a site, identified by siteID.
| |||||||||||||
| CsiteWlanApRadioIndex | 1.3.6.1.4.1.4329.15.3.10.8.1.1 | INTEGER (1..2) | NA | ||||||||||
column · INTEGER (1..2) · not-accessible · current Description. | |||||||||||||
| CsiteWlanApRadioAssigned | 1.3.6.1.4.1.4329.15.3.10.8.1.2 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Description.
| |||||||||||||
| NwidsWips | 1.3.6.1.4.1.4329.15.3.11 | ||||||||||||
| SmitigatorAnalysisEngine | 1.3.6.1.4.1.4329.15.3.11.1 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Mitigator analysis engine can be enabled/disabled using this variable. All mitigator related objects, objects defined in widsWips subtree, can only be accessed using SNMPv3 provided this variable is set to enable(1) on behalf of users with privacy.
| |||||||||||||
| SscanGroupMaxEntries | 1.3.6.1.4.1.4329.15.3.11.2 | Unsigned32 | RO | ||||||||||
scalar · Unsigned32 · read-only · current Maximum number of scan groups that can be created on the device. | |||||||||||||
| SscanGroupsCurrentEntries | 1.3.6.1.4.1.4329.15.3.11.3 | Unsigned32 | RO | ||||||||||
scalar · Unsigned32 · read-only · current Number of scan groups currently have been created on the device. | |||||||||||||
| SactiveThreatsCounts | 1.3.6.1.4.1.4329.15.3.11.4 | Unsigned32 | RO | ||||||||||
scalar · Unsigned32 · read-only · current Number of currently active threats that have been detected. | |||||||||||||
| SfriendlyAPCounts | 1.3.6.1.4.1.4329.15.3.11.5 | Unsigned32 | RO | ||||||||||
scalar · Unsigned32 · read-only · current Number of friendly access points that have been discovered at this point. | |||||||||||||
| SuncategorizedAPCounts | 1.3.6.1.4.1.4329.15.3.11.6 | Unsigned32 | RO | ||||||||||
scalar · Unsigned32 · read-only · current Number of uncategorized access points that have been discovered. This value refers to current number not the historical value. | |||||||||||||
| TwidsWipsEngineTable | 1.3.6.1.4.1.4329.15.3.11.11 | NA | |||||||||||
table · not-accessible · current Table of Mitigators defined on set of controllers each identified by widsWipsEngineControllerIPAddress. | |||||||||||||
| RwidsWipsEngineEntry | 1.3.6.1.4.1.4329.15.3.11.11.1 | NA | |||||||||||
row · not-accessible · current One entry in this table identifying a mitigator engine in a defined controller identified by IP address, widsWipsEngineControllerIPAddress. | |||||||||||||
| CwidsWipsEngineRowStatus | 1.3.6.1.4.1.4329.15.3.11.11.1.1 | RowStatus | RC | ||||||||||
column · RowStatus · read-create · current RowStatus for creation/deletion of mitigator engine row. | |||||||||||||
| CwidsWipsEngineControllerIPAddress | 1.3.6.1.4.1.4329.15.3.11.11.1.2 | IpAddress | RC | ||||||||||
column · IpAddress · read-create · current Ip address of the controller that the defined mitigator in this row will run on. | |||||||||||||
| CwidsWipsEnginePollInterval | 1.3.6.1.4.1.4329.15.3.11.11.1.3 | INTEGER (3..60) | RC | ||||||||||
column · INTEGER (3..60) · read-create · current Poll interval in seconds between successive keep alive messages between this controller and the mitigator engine to monitor status of mitigator engine. | |||||||||||||
| CwidsWipsEnginePollRetry | 1.3.6.1.4.1.4329.15.3.11.11.1.4 | INTEGER (0..20) | RC | ||||||||||
column · INTEGER (0..20) · read-create · current Number of consecutive retries of failed contact to a mitigator agent before declaring mitigator engine dead. | |||||||||||||
| TinServiceScanGroupTable | 1.3.6.1.4.1.4329.15.3.11.12 | NA | |||||||||||
table · not-accessible · current In service scan group enables the subsystem simultaneously scan for threats and performs wireless bridging based on 37xx-based APs. The threats are discovered and identified in the deployment environment and then classified for further actions. | |||||||||||||
| RinServiceScanGroupEntry | 1.3.6.1.4.1.4329.15.3.11.12.1 | NA | |||||||||||
row · not-accessible · current An entry in this table that defines attributes of a in-service scan group.
| |||||||||||||
| CscanGroupProfileID | 1.3.6.1.4.1.4329.15.3.11.12.1.1 | Unsigned32 | NA | ||||||||||
column · Unsigned32 · not-accessible · current A internally unique identifier for a scan group. Each scan group is indexed by this value. | |||||||||||||
| CinSrvScanGrpName | 1.3.6.1.4.1.4329.15.3.11.12.1.2 | DisplayString (SIZE (1..255)) | RC | ||||||||||
column · DisplayString (SIZE (1..255)) · read-create · current Textual description identifying the scan group. | |||||||||||||
| CinSrvScanGrpSecurityThreats | 1.3.6.1.4.1.4329.15.3.11.12.1.3 | INTEGER | RC | ||||||||||
column · INTEGER · read-create · current Enable/disable security engine to scan for threats.
| |||||||||||||
| CinSrvScanGrpMaxConcurrentAttacksPerAP | 1.3.6.1.4.1.4329.15.3.11.12.1.4 | INTEGER (0..6) | RC | ||||||||||
column · INTEGER (0..6) · read-create · current Max number of concurrent attacks per AP | |||||||||||||
| CinSrvScanGrpCounterMeasuresType | 1.3.6.1.4.1.4329.15.3.11.12.1.5 | Bits | RC | ||||||||||
column · Bits · read-create · current bit 0: Setting this bit prevents authorized stations from roaming to external honeypot APs. bit 1: Setting this bit prevents authorized stations from roaming to friendly APs. bit 2: Setting this bit prevents any station from using an internal honeypot AP. bit 3: Setting this bit prevents any station from using a spoofed AP. bit 4: Setting this bit drops frames in a controlled fashion during a flood attack. bit 5: Setting this bit removes network access from clients originating DoS attacks. bit 6: Setting this bit prevents any station from using an ad hoc mode device. bit 7: Setting this bit prevents any station from using a rogue AP.
| |||||||||||||
| CinSrvScanGrpScan2400MHzSelection | 1.3.6.1.4.1.4329.15.3.11.12.1.6 | Bits | RC | ||||||||||
column · Bits · read-create · current bit 0: by setting this bit scanning is performed on 2412 MHz frequency channel bit 1: by setting this bit scanning is performed on 2417 MHz frequency channel bit 2: by setting this bit scanning is performed on 2422 MHz frequency channel bit 3: by setting this bit scanning is performed on 2427 MHz frequency channel bit 4: by setting this bit scanning is performed on 2432 MHz frequency channel bit 5: by setting this bit scanning is performed on 2437 MHz frequency channel bit 6: by setting this bit scanning is performed on 2442 MHz frequency channel bit 7: by setting this bit scanning is performed on 2447 MHz frequency channel bit 8: by setting this bit scanning is performed on 2452 MHz frequency channel bit 9: by setting this bit scanning is performed on 2457 MHz frequency channel bit 10: by setting this bit scanning is performed on 2462 MHz frequency channel bit 11: by setting this bit scanning is performed on 2467 MHz frequency channel bit 12: by setting this bit scanning is performed on 2472 MHz frequency channel bit 13: by setting this bit scanning is performed on 2484 MHz frequency channel
| |||||||||||||
| CinSrvScanGrpScan5GHzSelection | 1.3.6.1.4.1.4329.15.3.11.12.1.7 | Bits | RC | ||||||||||
column · Bits · read-create · current bit 0: by setting this bit scanning is performed on 5040 MHz frequency channel bit 1: by setting this bit scanning is performed on 5060 MHz frequency channel bit 2: by setting this bit scanning is performed on 5080 MHz frequency channel bit 3: by setting this bit scanning is performed on 5180 MHz frequency channel bit 4: by setting this bit scanning is performed on 5200 MHz frequency channel bit 5: by setting this bit scanning is performed on 5220 MHz frequency channel bit 6: by setting this bit scanning is performed on 5240 MHz frequency channel bit 7: by setting this bit scanning is performed on 5260 MHz frequency channel bit 8: by setting this bit scanning is performed on 5280 MHz frequency channel bit 9: by setting this bit scanning is performed on 5300 MHz frequency channel bit 10: by setting this bit scanning is performed on 5320 MHz frequency channel bit 11: by setting this bit scanning is performed on 5500 MHz frequency channel bit 12: by setting this bit scanning is performed on 5520 MHz frequency channel bit 13: by setting this bit scanning is performed on 5540 MHz frequency channel bit 14: by setting this bit scanning is performed on 5560 MHz frequency channel bit 15: by setting this bit scanning is performed on 5580 MHz frequency channel bit 16: by setting this bit scanning is performed on 5600 MHz frequency channel bit 17: by setting this bit scanning is performed on 5620 MHz frequency channel bit 18: by setting this bit scanning is performed on 5640 MHz frequency channel bit 19: by setting this bit scanning is performed on 5660 MHz frequency channel bit 20: by setting this bit scanning is performed on 5680 MHz frequency channel bit 21: by setting this bit scanning is performed on 5700 MHz frequency channel bit 22: by setting this bit scanning is performed on 5745 MHz frequency channel bit 23: by setting this bit scanning is performed on 5765 MHz frequency channel bit 24: by setting this bit scanning is performed on 5785 MHz frequency channel bit 25: by setting this bit scanning is performed on 5805 MHz frequency channel bit 26: by setting this bit scanning is performed on 5825 MHz frequency channel bit 27: by setting this bit scanning is performed on 4920 MHz frequency channel bit 28: by setting this bit scanning is performed on 4940 MHz frequency channel bit 29: by setting this bit scanning is performed on 4960 MHz frequency channel bit 30: by setting this bit scanning is performed on 4980 MHz frequency channel
| |||||||||||||
| CinSrvScanGrpblockAdHocClientsPeriod | 1.3.6.1.4.1.4329.15.3.11.12.1.8 | Integer32 | RC | ||||||||||
column · Integer32 · read-create · current Number of seconds removing network access to the clients that are in ad hoc mode. | |||||||||||||
| CinSrvScanGrpClassifySourceIF | 1.3.6.1.4.1.4329.15.3.11.12.1.9 | INTEGER | RC | ||||||||||
column · INTEGER · read-create · current This variable allows to enable/disable classify sources of interference
| |||||||||||||
| CinSrvScanGrpRowStatus | 1.3.6.1.4.1.4329.15.3.11.12.1.10 | RowStatus | RC | ||||||||||
column · RowStatus · read-create · current RowStatus field for creation/deletion or changing row status. | |||||||||||||
| CinSrvScanGrpDetectRogueAP | 1.3.6.1.4.1.4329.15.3.11.12.1.11 | INTEGER | RC | ||||||||||
column · INTEGER · read-create · current This enables/disables rogue AP detection.
| |||||||||||||
| CinSrvScanGrpListeningPort | 1.3.6.1.4.1.4329.15.3.11.12.1.12 | Integer32 | RW | ||||||||||
column · Integer32 · read-write · current This OID represents the UDP port number that APs are to listen on while performing rogue AP detection. It has meaning only when inSrvScanGrpDetectRogueAP is enabled. | |||||||||||||
| ToutOfServiceScanGroupTable | 1.3.6.1.4.1.4329.15.3.11.13 | NA | |||||||||||
table · not-accessible · current Out of service scan group is used to collect and classify various wireless identifiers that are discovered in the deployment environment. Legacy APs (26xx-based, 36xx-based) can participate in this subsystem if they are configured for out-of-service scanning. The new APs, based on 37xx architecture, can also participate in this subsystem. | |||||||||||||
| RoutOfServiceScanGroupEntry | 1.3.6.1.4.1.4329.15.3.11.13.1 | NA | |||||||||||
row · not-accessible · current An entry in this table that defines attributes of a out-of-service scan group.
| |||||||||||||
| CoutOfSrvScanGrpName | 1.3.6.1.4.1.4329.15.3.11.13.1.1 | DisplayString (SIZE (1..255)) | RC | ||||||||||
column · DisplayString (SIZE (1..255)) · read-create · current Human readable textual description identifying scan group. | |||||||||||||
| CoutOfSrvScanGrpRadio | 1.3.6.1.4.1.4329.15.3.11.13.1.2 | INTEGER | RC | ||||||||||
column · INTEGER · read-create · current Radio selection for the scan group. Selected radio will be used in sacn group.
| |||||||||||||
| CoutOfSrvScanGrpChannelList | 1.3.6.1.4.1.4329.15.3.11.13.1.3 | INTEGER | RC | ||||||||||
column · INTEGER · read-create · current Identifying the channel(s) which will be used for the defined scan group.
| |||||||||||||
| CoutOfSrvScanGrpScanType | 1.3.6.1.4.1.4329.15.3.11.13.1.4 | INTEGER | RC | ||||||||||
column · INTEGER · read-create · current This field allows to select the type of scanning, active/passive, this scan group will be executing.
| |||||||||||||
| CoutOfSrvScanGrpChannelDwellTime | 1.3.6.1.4.1.4329.15.3.11.13.1.5 | INTEGER (200..500) | RC | ||||||||||
column · INTEGER (200..500) · read-create · current Dwell time in mili-second for performing scanning. | |||||||||||||
| CoutOfSrvScanGrpScanTimeInterval | 1.3.6.1.4.1.4329.15.3.11.13.1.6 | INTEGER (10..120) | RC | ||||||||||
column · INTEGER (10..120) · read-create · current Time interval between two sucssive scanning performed for this scan group. | |||||||||||||
| CoutOfSrvScanGrpSecurityScan | 1.3.6.1.4.1.4329.15.3.11.13.1.7 | INTEGER | RC | ||||||||||
column · INTEGER · read-create · current This field allows to enable/disable security Scan.
| |||||||||||||
| CoutOfSrvScanGrpScanActivity | 1.3.6.1.4.1.4329.15.3.11.13.1.8 | INTEGER | RC | ||||||||||
column · INTEGER · read-create · current Scaning can be started or stopped using this field.
| |||||||||||||
| CoutOfSrvScanGrpScanRowStatus | 1.3.6.1.4.1.4329.15.3.11.13.1.9 | Integer32 | RC | ||||||||||
column · Integer32 · read-create · current RowStatus field for the entry. | |||||||||||||
| TscanGroupAPAssignmentTable | 1.3.6.1.4.1.4329.15.3.11.14 | NA | |||||||||||
table · not-accessible · current The list of APs that have been assigned to a particular scan group, which could include in-service and out-of-service scanning groups. | |||||||||||||
| RscanGroupAPAssignmentEntry | 1.3.6.1.4.1.4329.15.3.11.14.1 | NA | |||||||||||
row · not-accessible · current An entry in this table defining an AP assignment to a group, identified by scanGroupProfileID. | |||||||||||||
| CscanGroupAPAssignApSerial | 1.3.6.1.4.1.4329.15.3.11.14.1.1 | OCTET STRING (SIZE (16)) | RO | ||||||||||
column · OCTET STRING (SIZE (16)) · read-only · current Unique string of characters, a 16-character long, serial number of an access point. | |||||||||||||
| CscanGroupAPAssignGroupName | 1.3.6.1.4.1.4329.15.3.11.14.1.2 | DisplayString (SIZE (1..255)) | RO | ||||||||||
column · DisplayString (SIZE (1..255)) · read-only · current Human readable textual description identifying scan group. | |||||||||||||
| CscanGroupAPAssignName | 1.3.6.1.4.1.4329.15.3.11.14.1.3 | DisplayString (SIZE (1..255)) | RO | ||||||||||
column · DisplayString (SIZE (1..255)) · read-only · current Access Point (AP) name associated to this scan group. | |||||||||||||
| CscanGroupAPAssignRadio1 | 1.3.6.1.4.1.4329.15.3.11.14.1.4 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current This field allows the radio #1 of the AP to be turned on/off. this field has meaning only the AP assigned to legacy (outOfScan) scan profile
| |||||||||||||
| CscanGroupAPAssignRadio2 | 1.3.6.1.4.1.4329.15.3.11.14.1.5 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current This field allows the radio #2 of the AP to be turned on/off. this field has meaning only the AP assigned to legacy (outOfScan) scan profile
| |||||||||||||
| CscanGroupAPAssignInactiveAP | 1.3.6.1.4.1.4329.15.3.11.14.1.6 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current This field allows to set the AP as active/inactive in scanning activities.
| |||||||||||||
| CscanGroupAPAssignAllowScanning | 1.3.6.1.4.1.4329.15.3.11.14.1.7 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Setting scanning to active/inactive using this AP.
| |||||||||||||
| CscanGroupAPAssignAllowSpectrumAnalysis | 1.3.6.1.4.1.4329.15.3.11.14.1.8 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Setting spectrum analysis to active/inactive using this AP.
| |||||||||||||
| CscanGroupAPAssignControllerIPAddress | 1.3.6.1.4.1.4329.15.3.11.14.1.9 | IpAddress | RW | ||||||||||
column · IpAddress · read-write · current The IP address of the controller to which the AP is connected currently. | |||||||||||||
| CscanGroupAPAssignFordwardingService | 1.3.6.1.4.1.4329.15.3.11.14.1.10 | Bits | RO | ||||||||||
column · Bits · read-only · current This OID lists the types of forwarding services that each Guardian is assigned to. A Guardian
will revert to providing these services when it is removed from the Guardian role. The meanings
of the individual flags are:
bit 0: Set if this AP is a member of a site.
bit 1: Set if this AP is assigned to a load group.
bit 2: Set if this AP is assigned to at least one WLAN service.
This OID is only relevant to APs in the Guardian role.
| |||||||||||||
| TscanAPTable | 1.3.6.1.4.1.4329.15.3.11.15 | NA | |||||||||||
table · not-accessible · current Table of sacn APs on each collector. This table can be viewed only in v3 mode when the mitigator analys engine is enabled. | |||||||||||||
| RscanAPEntry | 1.3.6.1.4.1.4329.15.3.11.15.1 | NA | |||||||||||
row · not-accessible · current An entry in this table identifying one access point. | |||||||||||||
| CscanAPControllerIPAddress | 1.3.6.1.4.1.4329.15.3.11.15.1.1 | IpAddress | RO | ||||||||||
column · IpAddress · read-only · current IP address of the controller on which the scanning executed. | |||||||||||||
| CscanAPSerialNumber | 1.3.6.1.4.1.4329.15.3.11.15.1.2 | OCTET STRING (SIZE (16)) | RO | ||||||||||
column · OCTET STRING (SIZE (16)) · read-only · current Serial number of the access point, 16-character human readable text, that is assigned to this group. | |||||||||||||
| CscanAPAcessPointName | 1.3.6.1.4.1.4329.15.3.11.15.1.3 | DisplayString (SIZE (1..255)) | RC | ||||||||||
column · DisplayString (SIZE (1..255)) · read-create · current Name of the access point belonging to this group. | |||||||||||||
| CscanAPRowStatus | 1.3.6.1.4.1.4329.15.3.11.15.1.4 | RowStatus | RC | ||||||||||
column · RowStatus · read-create · current Row status for the entry. | |||||||||||||
| CscanAPProfileName | 1.3.6.1.4.1.4329.15.3.11.15.1.5 | DisplayString (SIZE (1..255)) | RC | ||||||||||
column · DisplayString (SIZE (1..255)) · read-create · current Name of the scan profile to which this access point is assigned. | |||||||||||||
| CscanAPProfileType | 1.3.6.1.4.1.4329.15.3.11.15.1.6 | INTEGER | RC | ||||||||||
column · INTEGER · read-create · current inServiceScan(1): access point is performed In service Scan. guardianScan(2): access point is performed Guardian Scan. outOfServiceScan(3): access point is performed out of service Scan(Legacy Scan).
| |||||||||||||
| TfriendlyAPTable | 1.3.6.1.4.1.4329.15.3.11.16 | NA | |||||||||||
table · not-accessible · current List of Access Points that have been categorized as not being any threat to the wireless network that is managed by EWC. This table can be viewed only in v3 mode when the mitigator analys engine is enabled. | |||||||||||||
| RfriendlyAPEntry | 1.3.6.1.4.1.4329.15.3.11.16.1 | NA | |||||||||||
row · not-accessible · current An entry in this table identifying an access points and some of its attributes.
| |||||||||||||
| CfriendlyAPMacAddress | 1.3.6.1.4.1.4329.15.3.11.16.1.1 | MacAddress | RW | ||||||||||
column · MacAddress · read-write · current Ethernet MAC address of the access point. | |||||||||||||
| CfriendlyAPSSID | 1.3.6.1.4.1.4329.15.3.11.16.1.2 | DisplayString (SIZE (1..32)) | RW | ||||||||||
column · DisplayString (SIZE (1..32)) · read-write · current SSID broadcasted by the access point. | |||||||||||||
| CfriendlyAPDescription | 1.3.6.1.4.1.4329.15.3.11.16.1.3 | DisplayString (SIZE (1..255)) | RW | ||||||||||
column · DisplayString (SIZE (1..255)) · read-write · current Textual description that is used to identify the access point. | |||||||||||||
| CfriendlyAPManufacturer | 1.3.6.1.4.1.4329.15.3.11.16.1.4 | DisplayString (SIZE (1..255)) | RO | ||||||||||
column · DisplayString (SIZE (1..255)) · read-only · current Textual description identifying the access point manufacturer. | |||||||||||||
| TuncategorizedAPTable | 1.3.6.1.4.1.4329.15.3.11.17 | NA | |||||||||||
table · not-accessible · current List of APs that have not been categorized either as friendly, threat or authorized. | |||||||||||||
| RuncategorizedAPEntry | 1.3.6.1.4.1.4329.15.3.11.17.1 | NA | |||||||||||
| CuncategorizedAPMAC | 1.3.6.1.4.1.4329.15.3.11.17.1.1 | MacAddress | NA | ||||||||||
column · MacAddress · not-accessible · current MAC address of access point. | |||||||||||||
| CuncategorizedAPDescption | 1.3.6.1.4.1.4329.15.3.11.17.1.2 | DisplayString | RO | ||||||||||
column · DisplayString · read-only · current Textual description of access point. | |||||||||||||
| CuncategorizedAPManufacturer | 1.3.6.1.4.1.4329.15.3.11.17.1.3 | DisplayString | RO | ||||||||||
column · DisplayString · read-only · current Access point manufacturer. | |||||||||||||
| CuncategorizedAPClassify | 1.3.6.1.4.1.4329.15.3.11.17.1.4 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current By setting this field, access point can be reclassified and moved to different group.
| |||||||||||||
| CuncategorizedAPSSID | 1.3.6.1.4.1.4329.15.3.11.17.1.5 | DisplayString (SIZE (1..32)) | RO | ||||||||||
column · DisplayString (SIZE (1..32)) · read-only · current SSID broadcasted by the access point. | |||||||||||||
| TauthorizedAPTable | 1.3.6.1.4.1.4329.15.3.11.18 | NA | |||||||||||
table · not-accessible · current List of authorized access point. | |||||||||||||
| RauthorizedAPEntry | 1.3.6.1.4.1.4329.15.3.11.18.1 | NA | |||||||||||
row · not-accessible · current An entry in this table describing an authorized AP.
| |||||||||||||
| CauthorizedAPMAC | 1.3.6.1.4.1.4329.15.3.11.18.1.1 | MacAddress | NA | ||||||||||
column · MacAddress · not-accessible · current MAC address of access point. | |||||||||||||
| CauthorizedAPDescription | 1.3.6.1.4.1.4329.15.3.11.18.1.2 | DisplayString | RC | ||||||||||
column · DisplayString · read-create · current Discription of the access point. | |||||||||||||
| CauthorizedAPManufacturer | 1.3.6.1.4.1.4329.15.3.11.18.1.3 | DisplayString | RC | ||||||||||
column · DisplayString · read-create · current Access point's manufacturer. This field is cannot be set and it is deduced by MAC addressed. | |||||||||||||
| CauthorizedAPClassify | 1.3.6.1.4.1.4329.15.3.11.18.1.4 | INTEGER | RC | ||||||||||
column · INTEGER · read-create · current By setting this field, access point can be reclassified and moved to different group.
| |||||||||||||
| CauthorizedAPRowStatus | 1.3.6.1.4.1.4329.15.3.11.18.1.5 | RowStatus | RC | ||||||||||
column · RowStatus · read-create · current Action permitted are 'delete/add' row. | |||||||||||||
| TprohibitedAPTable | 1.3.6.1.4.1.4329.15.3.11.19 | NA | |||||||||||
table · not-accessible · current List of prohibited access points. | |||||||||||||
| RprohibitedAPEntry | 1.3.6.1.4.1.4329.15.3.11.19.1 | NA | |||||||||||
row · not-accessible · current An entry in this table describing an access point.
| |||||||||||||
| CprohibitedAPMAC | 1.3.6.1.4.1.4329.15.3.11.19.1.1 | MacAddress | NA | ||||||||||
column · MacAddress · not-accessible · current MAC address of access point. | |||||||||||||
| CprohibitedAPCategory | 1.3.6.1.4.1.4329.15.3.11.19.1.2 | INTEGER | RC | ||||||||||
column · INTEGER · read-create · current The category the access point in this row belongs to.
| |||||||||||||
| CprohibitedAPDescription | 1.3.6.1.4.1.4329.15.3.11.19.1.3 | DisplayString | RC | ||||||||||
column · DisplayString · read-create · current Description of the access point. | |||||||||||||
| CprohibitedAPManufacturer | 1.3.6.1.4.1.4329.15.3.11.19.1.4 | DisplayString | RC | ||||||||||
column · DisplayString · read-create · current Access point's manufacturer. This field is cannot be set and it is deduced by MAC addressed. | |||||||||||||
| CprohibitedAPClassify | 1.3.6.1.4.1.4329.15.3.11.19.1.5 | INTEGER | RC | ||||||||||
column · INTEGER · read-create · current By setting this field, access point can be reclassified and moved to different group.
| |||||||||||||
| CprohibitedAPRowStatus | 1.3.6.1.4.1.4329.15.3.11.19.1.6 | RowStatus | RC | ||||||||||
column · RowStatus · read-create · current Action permitted are 'delete/add' row. | |||||||||||||
| TdedicatedScanGroupTable | 1.3.6.1.4.1.4329.15.3.11.20 | NA | |||||||||||
table · not-accessible · current dedicated scan group enables the subsystem full time scan for threats based on 37xx-based APs. The threats are discovered and identified in the deployment environment and then classified for further actions. | |||||||||||||
| RdedicatedScanGroupEntry | 1.3.6.1.4.1.4329.15.3.11.20.1 | NA | |||||||||||
row · not-accessible · current An entry in this table that defines attributes of a dedicated scan group.
| |||||||||||||
| CdedicatedScanGrpName | 1.3.6.1.4.1.4329.15.3.11.20.1.1 | DisplayString (SIZE (1..255)) | RC | ||||||||||
column · DisplayString (SIZE (1..255)) · read-create · current Textual description identifying the scan group. | |||||||||||||
| CdedicatedScanGrpSecurityThreats | 1.3.6.1.4.1.4329.15.3.11.20.1.2 | INTEGER | RC | ||||||||||
column · INTEGER · read-create · current Enable/disable security engine to scan for threats.
| |||||||||||||
| CdedicatedScanGrpMaxConcurrentAttacksPerAP | 1.3.6.1.4.1.4329.15.3.11.20.1.3 | Integer32 (0..6) | RC | ||||||||||
column · Integer32 (0..6) · read-create · current Max number of concurrent attacks per AP | |||||||||||||
| CdedicatedScanGrpCounterMeasures | 1.3.6.1.4.1.4329.15.3.11.20.1.4 | Bits | RC | ||||||||||
column · Bits · read-create · current bit 0: Setting this bit prevents authorized stations from roaming to external honeypot APs. bit 1: Setting this bit prevents authorized stations from roaming to friendly APs. bit 2: Setting this bit prevents any station from using an internal honeypot AP. bit 3: Setting this bit prevents any station from using a spoofed AP. bit 4: Setting this bit drops frames in a controlled fashion during a flood attack. bit 5: Setting this bit removes network access from clients originating DoS attacks. bit 6: Setting this bit prevents any station from using an ad hoc mode device. bit 7: Setting this bit prevents any station from using a rogue AP.
| |||||||||||||
| CdedicatedScanGrpScan2400MHzFreq | 1.3.6.1.4.1.4329.15.3.11.20.1.5 | Bits | RC | ||||||||||
column · Bits · read-create · current bit 0: by setting this bit scanning is performed on 2412 MHz frequency channel bit 1: by setting this bit scanning is performed on 2417 MHz frequency channel bit 2: by setting this bit scanning is performed on 2422 MHz frequency channel bit 3: by setting this bit scanning is performed on 2427 MHz frequency channel bit 4: by setting this bit scanning is performed on 2432 MHz frequency channel bit 5: by setting this bit scanning is performed on 2437 MHz frequency channel bit 6: by setting this bit scanning is performed on 2442 MHz frequency channel bit 7: by setting this bit scanning is performed on 2447 MHz frequency channel bit 8: by setting this bit scanning is performed on 2452 MHz frequency channel bit 9: by setting this bit scanning is performed on 2457 MHz frequency channel bit 10: by setting this bit scanning is performed on 2462 MHz frequency channel bit 11: by setting this bit scanning is performed on 2467 MHz frequency channel bit 12: by setting this bit scanning is performed on 2472 MHz frequency channel bit 13: by setting this bit scanning is performed on 2484 MHz frequency channel
| |||||||||||||
| CdedicatedScanGrpScan5GHzFreq | 1.3.6.1.4.1.4329.15.3.11.20.1.6 | Bits | RC | ||||||||||
column · Bits · read-create · current bit 0: by setting this bit scanning is performed on 5040 MHz frequency channel bit 1: by setting this bit scanning is performed on 5060 MHz frequency channel bit 2: by setting this bit scanning is performed on 5080 MHz frequency channel bit 3: by setting this bit scanning is performed on 5180 MHz frequency channel bit 4: by setting this bit scanning is performed on 5200 MHz frequency channel bit 5: by setting this bit scanning is performed on 5220 MHz frequency channel bit 6: by setting this bit scanning is performed on 5240 MHz frequency channel bit 7: by setting this bit scanning is performed on 5260 MHz frequency channel bit 8: by setting this bit scanning is performed on 5280 MHz frequency channel bit 9: by setting this bit scanning is performed on 5300 MHz frequency channel bit 10: by setting this bit scanning is performed on 5320 MHz frequency channel bit 11: by setting this bit scanning is performed on 5500 MHz frequency channel bit 12: by setting this bit scanning is performed on 5520 MHz frequency channel bit 13: by setting this bit scanning is performed on 5540 MHz frequency channel bit 14: by setting this bit scanning is performed on 5560 MHz frequency channel bit 15: by setting this bit scanning is performed on 5580 MHz frequency channel bit 16: by setting this bit scanning is performed on 5600 MHz frequency channel bit 17: by setting this bit scanning is performed on 5620 MHz frequency channel bit 18: by setting this bit scanning is performed on 5640 MHz frequency channel bit 19: by setting this bit scanning is performed on 5660 MHz frequency channel bit 20: by setting this bit scanning is performed on 5680 MHz frequency channel bit 21: by setting this bit scanning is performed on 5700 MHz frequency channel bit 22: by setting this bit scanning is performed on 5745 MHz frequency channel bit 23: by setting this bit scanning is performed on 5765 MHz frequency channel bit 24: by setting this bit scanning is performed on 5785 MHz frequency channel bit 25: by setting this bit scanning is performed on 5805 MHz frequency channel bit 26: by setting this bit scanning is performed on 5825 MHz frequency channel bit 27: by setting this bit scanning is performed on 4920 MHz frequency channel bit 28: by setting this bit scanning is performed on 4940 MHz frequency channel bit 29: by setting this bit scanning is performed on 4960 MHz frequency channel bit 30: by setting this bit scanning is performed on 4980 MHz frequency channel
| |||||||||||||
| CdedicatedScanGrpBlockAdHocPeriod | 1.3.6.1.4.1.4329.15.3.11.20.1.7 | Integer32 | RC | ||||||||||
column · Integer32 · read-create · current Number of seconds removing network access to the clients that are in ad hoc mode. | |||||||||||||
| CdedicatedScanGrpClassifySourceIF | 1.3.6.1.4.1.4329.15.3.11.20.1.8 | INTEGER | RC | ||||||||||
column · INTEGER · read-create · current This variable allows to enable/disable classify sources of interference
| |||||||||||||
| CdedicatedScanGrpRowStatus | 1.3.6.1.4.1.4329.15.3.11.20.1.9 | RowStatus | RC | ||||||||||
column · RowStatus · read-create · current RowStatus field for creation/deletion or changing row status. | |||||||||||||
| CdedicatedScanGrpDetectRogueAP | 1.3.6.1.4.1.4329.15.3.11.20.1.10 | INTEGER | RC | ||||||||||
column · INTEGER · read-create · current This enables/disables rogue AP detection.
| |||||||||||||
| CdedicatedScanGrpListeningPort | 1.3.6.1.4.1.4329.15.3.11.20.1.11 | Integer32 | RC | ||||||||||
column · Integer32 · read-create · current This variable has meaning only when dedicatedScanGrpDetectRogueAP is enabled. The port number is the port for listening for rogue AP detection. | |||||||||||||
| NwidsWipsReport | 1.3.6.1.4.1.4329.15.3.11.30 | ||||||||||||
| TactiveThreatTable | 1.3.6.1.4.1.4329.15.3.11.30.1 | NA | |||||||||||
table · not-accessible · current List of active threats that have been discovered to this point of time. | |||||||||||||
| RactiveThreatEntry | 1.3.6.1.4.1.4329.15.3.11.30.1.1 | NA | |||||||||||
row · not-accessible · current An entry in this table describing an idividual threat charactersitics and attributes.
| |||||||||||||
| CactiveThreatIndex | 1.3.6.1.4.1.4329.15.3.11.30.1.1.1 | Unsigned32 | NA | ||||||||||
column · Unsigned32 · not-accessible · current Internally generated number without any significat meaning except used as indexing in this table. | |||||||||||||
| CactiveThreatCategory | 1.3.6.1.4.1.4329.15.3.11.30.1.1.2 | DisplayString | RO | ||||||||||
column · DisplayString · read-only · current Textual description describing the type of the threat. | |||||||||||||
| CactiveThreatDeviceMAC | 1.3.6.1.4.1.4329.15.3.11.30.1.1.3 | MacAddress | RO | ||||||||||
column · MacAddress · read-only · current MAC address of the device that the threat appears to be originated. | |||||||||||||
| CactiveThreatDateTime | 1.3.6.1.4.1.4329.15.3.11.30.1.1.4 | DisplayString | RO | ||||||||||
column · DisplayString · read-only · current Date and time the threat was discovered. | |||||||||||||
| CactiveThreatCounterMeasure | 1.3.6.1.4.1.4329.15.3.11.30.1.1.5 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current Counter measure has been taken to tackle the threat.
| |||||||||||||
| CactiveThreatAPName | 1.3.6.1.4.1.4329.15.3.11.30.1.1.6 | DisplayString | RO | ||||||||||
column · DisplayString · read-only · current Name of the access point. | |||||||||||||
| CactiveThreatRSS | 1.3.6.1.4.1.4329.15.3.11.30.1.1.7 | DisplayString | RO | ||||||||||
column · DisplayString · read-only · current Signal strength of the device considered to be a threat. | |||||||||||||
| CactiveThreatExtraDetails | 1.3.6.1.4.1.4329.15.3.11.30.1.1.8 | DisplayString | RO | ||||||||||
column · DisplayString · read-only · current Extra comments related to the threat. | |||||||||||||
| CactiveThreatThreat | 1.3.6.1.4.1.4329.15.3.11.30.1.1.9 | DisplayString | RO | ||||||||||
column · DisplayString · read-only · current Textual description of the threat. | |||||||||||||
| TcountermeasureAPTable | 1.3.6.1.4.1.4329.15.3.11.30.2 | NA | |||||||||||
table · not-accessible · current List of APs engaged in countermeasure activities to thwart coming threats. | |||||||||||||
| RcountermeasureAPEntry | 1.3.6.1.4.1.4329.15.3.11.30.2.1 | NA | |||||||||||
row · not-accessible · current An entry in this table identifying an AP engaged in countermeasure activities. | |||||||||||||
| CcountermeasureAPThreatIndex | 1.3.6.1.4.1.4329.15.3.11.30.2.1.1 | Unsigned32 | NA | ||||||||||
column · Unsigned32 · not-accessible · current Internally generated index of the access point taking part in countermeasure. | |||||||||||||
| CcountermeasureAPSerial | 1.3.6.1.4.1.4329.15.3.11.30.2.1.2 | DisplayString | RO | ||||||||||
column · DisplayString · read-only · current Serial number of the access point taking part in countermeasure. | |||||||||||||
| CcountermeasureAPName | 1.3.6.1.4.1.4329.15.3.11.30.2.1.3 | DisplayString | RO | ||||||||||
column · DisplayString · read-only · current Name of the access point taking part in countermeasure. | |||||||||||||
| CcountermeasureAPThreatCategory | 1.3.6.1.4.1.4329.15.3.11.30.2.1.4 | DisplayString | RO | ||||||||||
column · DisplayString · read-only · current Textual description of the threat category that countermeasure action is aimed at. | |||||||||||||
| CcountermeasureAPCountermeasure | 1.3.6.1.4.1.4329.15.3.11.30.2.1.5 | DisplayString | RO | ||||||||||
column · DisplayString · read-only · current Countermeasure has been taken to thwart the threat. | |||||||||||||
| CcountermeasureAPTime | 1.3.6.1.4.1.4329.15.3.11.30.2.1.6 | DisplayString | RO | ||||||||||
column · DisplayString · read-only · current The time that the countermeasure has started. | |||||||||||||
| TblacklistedClientTable | 1.3.6.1.4.1.4329.15.3.11.30.3 | NA | |||||||||||
table · not-accessible · current List of clients that have been blacklisted due to preceived threats they may pose to the safe functioning of the operating network. | |||||||||||||
| RblacklistedClientEntry | 1.3.6.1.4.1.4329.15.3.11.30.3.1 | NA | |||||||||||
row · not-accessible · current An entry in this table pertaining information about the MU that has been blacklisted.
| |||||||||||||
| CblacklistedClientMAC | 1.3.6.1.4.1.4329.15.3.11.30.3.1.1 | MacAddress | RO | ||||||||||
column · MacAddress · read-only · current MAC address of the client. | |||||||||||||
| CblacklistedClientStatTime | 1.3.6.1.4.1.4329.15.3.11.30.3.1.2 | DisplayString | RO | ||||||||||
column · DisplayString · read-only · current The time blacklisting started. | |||||||||||||
| CblacklistedClientEndTime | 1.3.6.1.4.1.4329.15.3.11.30.3.1.3 | DisplayString | RO | ||||||||||
column · DisplayString · read-only · current The time blacklisting ends. | |||||||||||||
| CblacklistedClientReason | 1.3.6.1.4.1.4329.15.3.11.30.3.1.4 | DisplayString | RO | ||||||||||
column · DisplayString · read-only · current Reason for blacklisting the client. | |||||||||||||
| TthreatSummaryTable | 1.3.6.1.4.1.4329.15.3.11.30.4 | NA | |||||||||||
table · not-accessible · current Summary of all threats that have been detected in the network by wireless controller system. | |||||||||||||
| RthreatSummaryEntry | 1.3.6.1.4.1.4329.15.3.11.30.4.1 | NA | |||||||||||
row · not-accessible · current An entry summarizing statistics about a category of a threat.
| |||||||||||||
| CthreatSummaryIndex | 1.3.6.1.4.1.4329.15.3.11.30.4.1.1 | Unsigned32 | NA | ||||||||||
column · Unsigned32 · not-accessible · current Internally generated index. | |||||||||||||
| CthreatSummaryCategory | 1.3.6.1.4.1.4329.15.3.11.30.4.1.2 | DisplayString | RO | ||||||||||
column · DisplayString · read-only · current Textul description identifying the category of a threat. | |||||||||||||
| CthreatSummaryActiveThreat | 1.3.6.1.4.1.4329.15.3.11.30.4.1.3 | Unsigned32 | RO | ||||||||||
column · Unsigned32 · read-only · current Counts of threats that are currently active. | |||||||||||||
| CthreatSummaryHistoricalCounts | 1.3.6.1.4.1.4329.15.3.11.30.4.1.4 | Unsigned32 | RO | ||||||||||
column · Unsigned32 · read-only · current Historical counts of such threat that were detected in the past by the wireless controller system. | |||||||||||||
| NapNotifications | 1.3.6.1.4.1.4329.15.3.19 | ||||||||||||
| SapEventId | 1.3.6.1.4.1.4329.15.3.19.1 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Identifies event associated with AP or AP tunnel: apPollTimeout - an event triggered when the AP disconnects from the controller. apRegister - an event triggered when the AP connects to the controller.
| |||||||||||||
| SapEventDescription | 1.3.6.1.4.1.4329.15.3.19.2 | OCTET STRING | RO | ||||||||||
scalar · OCTET STRING · read-only · current Contains the description of the most recently triggered event. | |||||||||||||
| SapEventAPSerialNumber | 1.3.6.1.4.1.4329.15.3.19.3 | OCTET STRING (SIZE (16)) | RO | ||||||||||
scalar · OCTET STRING (SIZE (16)) · read-only · current 16-character serial number of the AP. | |||||||||||||
| !apTunnelAlarm | 1.3.6.1.4.1.4329.15.3.19.4 | ||||||||||||
notification · current alarm associated with AP and AP interface. | |||||||||||||
| NstationSessionNotifications | 1.3.6.1.4.1.4329.15.3.20 | ||||||||||||
| SstationEventType | 1.3.6.1.4.1.4329.15.3.20.1 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current station event type include: registration(0): MU registration. deRegistration(1): MU de-registration. stateChange(2): MU state changed. registrationFailed(3): MU registration failure. roam(4): MU roam. mbaTimeout(5): MU MAC-Based-Authentication time out. mbaAccepted(6): MU MAC-Based-Authentication accepted. mbaRejected(7): MU MAC-Based-Authentication rejected. authorizationChanged(8): MU authorization changed. authentication(9): MU authentication. authenticationFailed(10): MU authentication failure. locationUpdate(11): MU location updated. areaChange(12): MU roamed to other area.
| |||||||||||||
| SstationMacAddress | 1.3.6.1.4.1.4329.15.3.20.2 | MacAddress | RO | ||||||||||
scalar · MacAddress · read-only · current MAC address of the station that is the subject of this event report. | |||||||||||||
| SstationIPAddress | 1.3.6.1.4.1.4329.15.3.20.3 | IpAddress | RO | ||||||||||
scalar · IpAddress · read-only · current IP address of the station that is the subject of this event report. | |||||||||||||
| SstationAPName | 1.3.6.1.4.1.4329.15.3.20.4 | DisplayString | RO | ||||||||||
scalar · DisplayString · read-only · current name of the AP which station associated with | |||||||||||||
| SstationAPSSID | 1.3.6.1.4.1.4329.15.3.20.5 | DisplayString | RO | ||||||||||
scalar · DisplayString · read-only · current SSID broadcasted by the access point which station connected to | |||||||||||||
| SstationDetailEvent | 1.3.6.1.4.1.4329.15.3.20.6 | DisplayString | RO | ||||||||||
scalar · DisplayString · read-only · current detail description of the station event | |||||||||||||
| SstationRoamedAPName | 1.3.6.1.4.1.4329.15.3.20.7 | DisplayString | RO | ||||||||||
scalar · DisplayString · read-only · current name of the access point which station roamed from | |||||||||||||
| SstationName | 1.3.6.1.4.1.4329.15.3.20.8 | DisplayString | RO | ||||||||||
scalar · DisplayString · read-only · current name of station | |||||||||||||
| SstationBSSID | 1.3.6.1.4.1.4329.15.3.20.9 | DisplayString | RO | ||||||||||
scalar · DisplayString · read-only · current the Mac address of the radio which station connect to | |||||||||||||
| SstationEventTimeStamp | 1.3.6.1.4.1.4329.15.3.20.10 | TimeTicks | RO | ||||||||||
scalar · TimeTicks · read-only · current The duration in hundredths of a second from the network agent start time to the time of generation of the station event. | |||||||||||||
| !stationEventAlarm | 1.3.6.1.4.1.4329.15.3.20.11 | ||||||||||||
notification · current A trap describing a significant event that happened to a station during a session on the network. A controller can sees hundreds or even thousands of these events every second. | |||||||||||||
| SstationIPv6Address1 | 1.3.6.1.4.1.4329.15.3.20.12 | Ipv6Address | RO | ||||||||||
scalar · Ipv6Address · read-only · current One of the IPv6 addresses of the station that is the subject of this event report. | |||||||||||||
| SstationIPv6Address2 | 1.3.6.1.4.1.4329.15.3.20.13 | Ipv6Address | RO | ||||||||||
scalar · Ipv6Address · read-only · current One of the IPv6 addresses of the station that is the subject of this event report. | |||||||||||||
| SstationIPv6Address3 | 1.3.6.1.4.1.4329.15.3.20.14 | Ipv6Address | RO | ||||||||||
scalar · Ipv6Address · read-only · current One of the IPv6 addresses of the station that is the subject of this event report. | |||||||||||||
| NhiPathWirelessHWCConformance | 1.3.6.1.4.1.4329.15.3.30 | ||||||||||||
| MhiPathWirelessHWCModule | 1.3.6.1.4.1.4329.15.3.30.1 | ||||||||||||
compliance · current Conformance definition for the EWC MIB.
| |||||||||||||
| GhiPathWirelessHWCGroup | 1.3.6.1.4.1.4329.15.3.30.2 | ||||||||||||
group · current Conformance groups.
| |||||||||||||
| GhiPathWirelessHWCAlarms | 1.3.6.1.4.1.4329.15.3.30.3 | ||||||||||||
group · current Conformance information for the alarm groups. | |||||||||||||
| GhiPathWirelessHWCObsolete | 1.3.6.1.4.1.4329.15.3.30.4 | obsolete | |||||||||||
group · obsolete List of object that EWC does not anymore support.
| |||||||||||||
| NwirelessEWCGroups | 1.3.6.1.4.1.4329.15.3.30.5 | ||||||||||||
| GphysicalPortsGroup | 1.3.6.1.4.1.4329.15.3.30.5.1 | deprecated | |||||||||||
group · deprecated Physical ports and their attributes. | |||||||||||||
| GphyDHCPRangeGroup | 1.3.6.1.4.1.4329.15.3.30.5.2 | deprecated | |||||||||||
group · deprecated DHCP objects and attributes associated to physical ports. | |||||||||||||
| GlayerTwoPortGroup | 1.3.6.1.4.1.4329.15.3.30.5.3 | ||||||||||||
group · current Collection of layer two ports objects. | |||||||||||||
| GmuGroup | 1.3.6.1.4.1.4329.15.3.30.5.4 | ||||||||||||
group · current MU attributes associated to EWC. | |||||||||||||
| GapStatsGroup | 1.3.6.1.4.1.4329.15.3.30.5.5 | ||||||||||||
group · current Collection of objects and attributes related to AP statistics.
| |||||||||||||
| GmuACLGroup | 1.3.6.1.4.1.4329.15.3.30.5.6 | ||||||||||||
group · current List of objects for creation of blacklist/whitelist.
| |||||||||||||
| GsiteGroup | 1.3.6.1.4.1.4329.15.3.30.5.7 | ||||||||||||
group · current A collection of objects providing Site creation and its attributes.
| |||||||||||||
| GsitePolicyGroup | 1.3.6.1.4.1.4329.15.3.30.5.8 | ||||||||||||
| GsiteCosGroup | 1.3.6.1.4.1.4329.15.3.30.5.9 | ||||||||||||
| GsiteAPGroup | 1.3.6.1.4.1.4329.15.3.30.5.10 | ||||||||||||
| GsiteWlanGroup | 1.3.6.1.4.1.4329.15.3.30.5.11 | ||||||||||||
| GapGroup | 1.3.6.1.4.1.4329.15.3.30.5.12 | ||||||||||||
group · current List of objects defining configuration attributes of an AP.
| |||||||||||||
| GwlanGroup | 1.3.6.1.4.1.4329.15.3.30.5.13 | ||||||||||||
group · current List of objects defining configuration attributes of a WLAN.
| |||||||||||||
| GwlanStatsGroup | 1.3.6.1.4.1.4329.15.3.30.5.14 | ||||||||||||
group · current List of objects defining configuration attributes of a WLAN. | |||||||||||||
| GtopologyGroup | 1.3.6.1.4.1.4329.15.3.30.5.15 | ||||||||||||
group · current List of objects defining configuration attributes of a WLAN.
| |||||||||||||
| GtopologyStatGroup | 1.3.6.1.4.1.4329.15.3.30.5.16 | ||||||||||||
group · current List of objects for defining topology statics.
| |||||||||||||
| GloadGroup | 1.3.6.1.4.1.4329.15.3.30.5.17 | ||||||||||||
group · current A collection of objects providing Load Group creation and its attributes. | |||||||||||||
| GwidsWipsObjectsGroup | 1.3.6.1.4.1.4329.15.3.30.5.18 | ||||||||||||
group · current Objects defining the state of WIDS-WIPS for the controller. | |||||||||||||
| GwidsWipsEngineGroup | 1.3.6.1.4.1.4329.15.3.30.5.19 | ||||||||||||
group · current Set of objects defining attributes of a WIDS-WIPS engine. | |||||||||||||
| GoutOfServiceScanGroup | 1.3.6.1.4.1.4329.15.3.30.5.20 | ||||||||||||
group · current List of objects for defining out-of-service scan group. | |||||||||||||
| GinServiceScanGroup | 1.3.6.1.4.1.4329.15.3.30.5.21 | ||||||||||||
group · current List of objects for defining in-service scan group.
| |||||||||||||
| GscanGroupAPAssignmentGroup | 1.3.6.1.4.1.4329.15.3.30.5.22 | ||||||||||||
group · current List of objects for assignment of AP to scan group.
| |||||||||||||
| GscanAPGroup | 1.3.6.1.4.1.4329.15.3.30.5.23 | ||||||||||||
group · current List of objects for defining AP scan groups in EWC. | |||||||||||||
| GfriendlyAPGroup | 1.3.6.1.4.1.4329.15.3.30.5.24 | ||||||||||||
group · current List of objects defining friendly APs identified during scanning time. | |||||||||||||
| GwlanSecurityReportGroup | 1.3.6.1.4.1.4329.15.3.30.5.25 | ||||||||||||
group · current Set of objects defining attributes of security group report. | |||||||||||||
| GapAntennaGroup | 1.3.6.1.4.1.4329.15.3.30.5.26 | ||||||||||||
group · current A collection of objects defining an antenna attributes for an AP.
| |||||||||||||
| GmuAccessListGroup | 1.3.6.1.4.1.4329.15.3.30.5.27 | ||||||||||||
group · current List of objects for creation of MU access list to block MU access, case of black list, or allow access, case of white list to wireless controller resources. | |||||||||||||
| GactiveThreatGroup | 1.3.6.1.4.1.4329.15.3.30.5.28 | ||||||||||||
group · current List of objects defining a discovered security threat. | |||||||||||||
| GcountermeasureAPGroup | 1.3.6.1.4.1.4329.15.3.30.5.29 | ||||||||||||
group · current List of objects defining APs taking part in countermeasure activities to thwart incoming threats. | |||||||||||||
| GblaclistedClientGroup | 1.3.6.1.4.1.4329.15.3.30.5.30 | ||||||||||||
group · current List of objects identifying blacklisted clients. | |||||||||||||
| GthreatSummaryGroup | 1.3.6.1.4.1.4329.15.3.30.5.31 | ||||||||||||
group · current List of objects defining attributes of known discovered threat. | |||||||||||||
| GlicensingInformationGroup | 1.3.6.1.4.1.4329.15.3.30.5.32 | ||||||||||||
group · current List of objects providing licensing information for the controller system. | |||||||||||||
| GstationsByProtocolGroup | 1.3.6.1.4.1.4329.15.3.30.5.33 | ||||||||||||
group · current List of objects for aggregated MUs on a specific wireless channel. | |||||||||||||
| GapByChannelGroup | 1.3.6.1.4.1.4329.15.3.30.5.34 | ||||||||||||
group · current List of objects for aggregated access points on a wireless channel.
| |||||||||||||
| GuncategorizedAPGroup | 1.3.6.1.4.1.4329.15.3.30.5.35 | ||||||||||||
group · current Objects defining uncategorized access points discovered by Radar application. | |||||||||||||
| GauthorizedAPGroup | 1.3.6.1.4.1.4329.15.3.30.5.36 | ||||||||||||
group · current Objects defining authorized access points discovered by Radar application. | |||||||||||||
| GprohibitedAPGroup | 1.3.6.1.4.1.4329.15.3.30.5.37 | ||||||||||||
group · current Objects defining prohibited access points discovered by Radar application. | |||||||||||||
| GdedicatedScanGroup | 1.3.6.1.4.1.4329.15.3.30.5.38 | ||||||||||||
group · current List of objects for defining dedicated scan group.
| |||||||||||||
| GapRadioAntennaGroup | 1.3.6.1.4.1.4329.15.3.30.5.39 | ||||||||||||
group · current A collection of objects defining an antenna attributes for an AP. | |||||||||||||
| GradiusFastFailoverEventsGroup | 1.3.6.1.4.1.4329.15.3.30.5.40 | ||||||||||||
| GdhcpRelayListenersGroup | 1.3.6.1.4.1.4329.15.3.30.5.41 | ||||||||||||
group · current List of objects for defining dhcpRelayListeners. | |||||||||||||
| GauthenticationAdvancedGroup | 1.3.6.1.4.1.4329.15.3.30.5.42 | ||||||||||||
group · current List of objects for defining authenticationAdvanced. | |||||||||||||
| GradiusExtnsSettingGroup | 1.3.6.1.4.1.4329.15.3.30.5.43 | ||||||||||||
group · current List of objects for defining radiusExtnsSetting. | |||||||||||||
| IhiPathWirelessControllerMib | 1.3.6.1.4.1.4329.15.5.2 | ||||||||||||
identity The access controller MIB | |||||||||||||
Textual conventions
HundredthOfGauge32Gauge32Display hint:
d-2This textual convention represents a hundredth of a gauge number.
HundredthOfGauge64Counter64Display hint:
d-2This textual convention represents a hundredth of a 64-bit gauge number.
HundredthOfInt32Integer32Display hint:
d-2This textual convention represents a hundredth of an integer number.
LogEventSeverityINTEGERcritical(1)information(4)major(2)minor(3)trace(5)The log event severities used in the access controller.
Traps / Notifications
- apTunnelAlarm
1.3.6.1.4.1.4329.15.3.19.4 - hiPathWirelessLogAlarm
1.3.6.1.4.1.4329.15.3.9.6 - stationEventAlarm
1.3.6.1.4.1.4329.15.3.20.11
Groups and compliance
- activeThreatGroup
- apAntennaGroup
- apByChannelGroup
- apGroup
- apRadioAntennaGroup
- apStatsGroup
- authenticationAdvancedGroup
- authorizedAPGroup
- blaclistedClientGroup
- countermeasureAPGroup
- dedicatedScanGroup
- dhcpRelayListenersGroup
- friendlyAPGroup
- hiPathWirelessHWCAlarms
- hiPathWirelessHWCGroup
- hiPathWirelessHWCModule
- hiPathWirelessHWCObsolete
- inServiceScanGroup
- layerTwoPortGroup
- licensingInformationGroup
- loadGroup
- muACLGroup
- muAccessListGroup
- muGroup
- outOfServiceScanGroup
- phyDHCPRangeGroup
- physicalPortsGroup
- prohibitedAPGroup
- radiusExtnsSettingGroup
- radiusFastFailoverEventsGroup
- scanAPGroup
- scanGroupAPAssignmentGroup
- siteAPGroup
- siteCosGroup
- siteGroup
- sitePolicyGroup
- siteWlanGroup
- stationsByProtocolGroup
- threatSummaryGroup
- topologyGroup
- topologyStatGroup
- uncategorizedAPGroup
- widsWipsEngineGroup
- widsWipsObjectsGroup
- wlanGroup
- wlanSecurityReportGroup
- wlanStatsGroup