XF-RADIOLINK-RLT-MIB
Ericsson ABThis MIB defines objects for Radio Link Terminal (RLT) and Carrier Termination (CT) for new Radio Link application in MINI-LINK TN supporting dual carrier capability.
snmptranslate -m XF-RADIOLINK-RLT-MIB -Tpsnmpwalk -v2c -c <community> -m XF-RADIOLINK-RLT-MIB <host> 1.3.6.1.4.1.193.81.3.4.5Imports
| ENTITY-MIB | entLogicalIndex, entPhysicalIndex |
|---|---|
| HC-PerfHist-TC-MIB | HCPerfCurrentCount |
| IF-MIB | ifIndex |
| INET-ADDRESS-MIB | InetAddressIPv6 |
| PerfHist-TC-MIB | PerfCurrentCount, PerfIntervalCount |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | Bits, Counter32, Counter64, Gauge32, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso |
| SNMPv2-TC | DisplayString, PhysAddress, TEXTUAL-CONVENTION, TruthValue |
| XF-TOP-MIB | xfRadioLink |
OID tree
| Name | OID | Type | Access | Status | Example | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| IxfRadioLinkRltMIB | 1.3.6.1.4.1.193.81.3.4.5 | ||||||||||||||||||||
identity This MIB defines objects for Radio Link Terminal (RLT) and Carrier Termination (CT) for new Radio Link application in MINI-LINK TN supporting dual carrier capability. | |||||||||||||||||||||
| NxfRadioLinkRltObjects | 1.3.6.1.4.1.193.81.3.4.5.1 | ||||||||||||||||||||
| TxfChannelGroupTable | 1.3.6.1.4.1.193.81.3.4.5.1.1 | NA | |||||||||||||||||||
table · not-accessible · current This table lists all relationships, for ech Channel Group (CG), between the Bonding/RLP interface and the RL WAN interface and allows to configure CG as either Bonding or Radio Link protection (RLP). | |||||||||||||||||||||
| RxfChannelGroupEntry | 1.3.6.1.4.1.193.81.3.4.5.1.1.1 | NA | |||||||||||||||||||
| CcgIfIndex | 1.3.6.1.4.1.193.81.3.4.5.1.1.1.1 | Integer32 (1..2147483647) | RO | ||||||||||||||||||
column · Integer32 (1..2147483647) · read-only · current It is the ifIndex of WAN interface. The interface identified by atIfIndex is the same interface as identified by the same value of ifIndex. | |||||||||||||||||||||
| CcgTypeIndex | 1.3.6.1.4.1.193.81.3.4.5.1.1.1.2 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Index representing the Channel Group interface type: - Bonding (2) - RLP: Radio Link Protection (3)
| |||||||||||||||||||||
| CxfIfStatus | 1.3.6.1.4.1.193.81.3.4.5.1.1.1.3 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current This object defines the Channel Group interface type: either Bonding or RLP (Radio Link Protection). Default: notReady
| |||||||||||||||||||||
| TxfLIMappingTable | 1.3.6.1.4.1.193.81.3.4.5.1.2 | NA | |||||||||||||||||||
table · not-accessible · current This table is used when navigating from a logical entity to interface, representing the relationship between: - RLT logical entity and either Bonding/RLP interface; - Carrier Termination (CT) logical entity and RAU IF interface. | |||||||||||||||||||||
| RxfLIMappingEntry | 1.3.6.1.4.1.193.81.3.4.5.1.2.1 | NA | |||||||||||||||||||
| CliEntLogicalIndex | 1.3.6.1.4.1.193.81.3.4.5.1.2.1.1 | Integer32 (1..2147483647) | RO | ||||||||||||||||||
column · Integer32 (1..2147483647) · read-only · current The value of this object uniquely identifies the logical entity: RLT (Radio Link Terminal) and CT (Carrier Termination). The logical entity identified by liEntLogicalIndex is the same interface as identified by the same value of entLogicalIndex. | |||||||||||||||||||||
| CliIfIndex | 1.3.6.1.4.1.193.81.3.4.5.1.2.1.2 | Integer32 (1..2147483647) | RO | ||||||||||||||||||
column · Integer32 (1..2147483647) · read-only · current It represents the ifIndex of Bonding/RLP interface and RAU IF. The interface identified by liIfIndex is the same interface as identified by the same value of ifIndex. | |||||||||||||||||||||
| CxfLIName | 1.3.6.1.4.1.193.81.3.4.5.1.2.1.3 | DisplayString (SIZE (0..31)) | RO | ||||||||||||||||||
column · DisplayString (SIZE (0..31)) · read-only · current It represents the Name of the Radio Link Terminal (RLT) or Carrier Termination (CT). | |||||||||||||||||||||
| CxfLIIfDescr | 1.3.6.1.4.1.193.81.3.4.5.1.2.1.4 | DisplayString (SIZE (0..31)) | RO | ||||||||||||||||||
column · DisplayString (SIZE (0..31)) · read-only · current A textual string containing information about the ifDescr of both Channel Group interface (either Bonding or RLP (Radio Link Protection)) and RAU IF interface. | |||||||||||||||||||||
| TxfCarrierTerminationTable | 1.3.6.1.4.1.193.81.3.4.5.1.3 | NA | |||||||||||||||||||
table · not-accessible · current This table is used to configure the Carrier Termination (CT). | |||||||||||||||||||||
| RxfCarrierTerminationEntry | 1.3.6.1.4.1.193.81.3.4.5.1.3.1 | NA | |||||||||||||||||||
| CxfCarrierTermDistinguishedName | 1.3.6.1.4.1.193.81.3.4.5.1.3.1.1 | DisplayString (SIZE (0..31)) | RO | FCT 1/1/1 | |||||||||||||||||
column · DisplayString (SIZE (0..31)) · read-only · current It represents the distinguished name of the Carrier Termination in the format Rack/Slot/CT. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CxfCarrierTermLabel | 1.3.6.1.4.1.193.81.3.4.5.1.3.1.2 | DisplayString (SIZE (0..31)) | RW | ||||||||||||||||||
column · DisplayString (SIZE (0..31)) · read-write · current Label identifying the Carrier Termination. It can be freely set by operator to label the Carrier Termination. | |||||||||||||||||||||
| CxfCarrierTermOperStatus | 1.3.6.1.4.1.193.81.3.4.5.1.3.1.3 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current It represents the operative status of the Carrier Termination: - down(2) - up(3) - degraded(4) - testing(5)
| |||||||||||||||||||||
| CxfCarrierTermRadioFrameId | 1.3.6.1.4.1.193.81.3.4.5.1.3.1.4 | Integer32 | RW | ||||||||||||||||||
column · Integer32 · read-write · current It represents the selected Radio Frame ID. | |||||||||||||||||||||
| CxfCarrierTermPreamble | 1.3.6.1.4.1.193.81.3.4.5.1.3.1.5 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current It allows to set different preambles in the radio frame of each Carrier Termination in a XPIC or MIMO configuration: - preambleA(2) - preambleB(3) - preambleC(4) - preambleD(5) For non XPIC nor MIMO configurations, it can be left to notSpecified(1).
| |||||||||||||||||||||
| CxfCarrierTermSelectedMinACM | 1.3.6.1.4.1.193.81.3.4.5.1.3.1.6 | CarrierTermACMIndex | RW | ||||||||||||||||||
column · CarrierTermACMIndex · read-write · current It represents the selected minimum Tx ACM (Adaptive Code Modulation). | |||||||||||||||||||||
| CxfCarrierTermActualACM | 1.3.6.1.4.1.193.81.3.4.5.1.3.1.7 | CarrierTermACMIndex | RO | ||||||||||||||||||
column · CarrierTermACMIndex · read-only · current It represents the actual (current) Tx ACM (Adaptive Code Modulation). | |||||||||||||||||||||
| CxfCarrierTermSelectedMaxACM | 1.3.6.1.4.1.193.81.3.4.5.1.3.1.8 | CarrierTermACMIndex | RW | ||||||||||||||||||
column · CarrierTermACMIndex · read-write · current It represents the selected maximum Tx ACM (Adaptive Code Modulation). | |||||||||||||||||||||
| CxfCarrierTermCapabilitiesLastChange | 1.3.6.1.4.1.193.81.3.4.5.1.3.1.9 | TimeTicks | RO | ||||||||||||||||||
column · TimeTicks · read-only · current The value of sysUpTime at the time of the last creation or deletion of an entry in the xfCarrierTerminationCapabilityTable. If the number of entries has been unchanged since the last re-initialization of the local network management subsystem, then this object contains a zero value. | |||||||||||||||||||||
| CxfCarrierTermReferenceSEC | 1.3.6.1.4.1.193.81.3.4.5.1.3.1.10 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current Reference Spectrum Efficiency Class (SEC): - notSpecified(1): not configured, not possible to set - sec2(2): spectrum eff. Class 2 - sec4L(3): spectrum eff. Class 4L - sec4H(4): specturm eff. Class 4H - sec5LB(5): spectrum eff. Class 5LB - sec5HB(6): spectrum eff. Class 5HB - sec6LB(7): spectrum eff. Class 6LB - sec6HB(8): spectrum eff. Class 6HB - sec7B(9): spectrum eff. Class 7B In ETSI, a value different from notSpecified(1) must be configured. In ANSI, no value can be set and notSpecified(1) is always returned. Near end access: read-write. Far end access: read-write.
| |||||||||||||||||||||
| CxfCarrierTermWantedLicensedCapacity | 1.3.6.1.4.1.193.81.3.4.5.1.3.1.11 | Integer32 (0..2147483647) | RW | ||||||||||||||||||
column · Integer32 (0..2147483647) · read-write · current It represents the wanted traffic licensed capacity on the Carrier Termination, expressed in Kbps. The default value 0 (i.e. disabled) means that no wanted licensed capacity has been selected by the user. The value used by RL license logic to request capacity licenses for the Carrier Termination is: - the capacity of selected max profile, if xfCarrierTermWantedLicensedCapacity = 0 - the value of xfCarrierTermWantedLicensedCapacity itself, if it is different from 0 | |||||||||||||||||||||
| CxfCarrierTermActualLicensedCapacity | 1.3.6.1.4.1.193.81.3.4.5.1.3.1.12 | Integer32 (0..2147483647) | RO | ||||||||||||||||||
column · Integer32 (0..2147483647) · read-only · current This MO represents the Actual Licensed Capacity used on the Carrier Termination: - if Wanted Licensed Capacity is disabled (i.e. xfCarrierTermWantedLicensedCapacity = 0), the Selected Max ACM (xfCarrierTermSelectedMaxACM MO) is used for requesting the license capacity on the carrier; - if Wanted Licensed Capacity is enabled (i.e. xfCarrierTermWantedLicensedCapacity > 0), the value of Wanted Licensed Capacity itself is used for requesting the license capacity on the carrier. | |||||||||||||||||||||
| CxfCarrierTermActualCapacity | 1.3.6.1.4.1.193.81.3.4.5.1.3.1.13 | Integer32 (0..2147483647) | RO | 250000 | |||||||||||||||||
column · Integer32 (0..2147483647) · read-only · current It represents the actual transmitted capacity supported by Carrier Termination in Kbps. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CxfCarrierTermPolarization | 1.3.6.1.4.1.193.81.3.4.5.1.3.1.14 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current XPIC polarization, either horizontal or vertical.
| |||||||||||||||||||||
| CxfCarrierTermXPICOperStatus | 1.3.6.1.4.1.193.81.3.4.5.1.3.1.15 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current XPIC locking status: - Other(1): don't use - Locked(2): XPIC is locked: XPI valid - Unlocked(3): XPIC is not locked: XPI not valid - Mute(4): XPIC is muted (XPIC recovery started) - NotApplicable(5): XPIC is disabled
| |||||||||||||||||||||
| CxfCarrierTermMIMOOperStatus | 1.3.6.1.4.1.193.81.3.4.5.1.3.1.16 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current MIMO locking status: - Other(1): don't use - Locked(2): MIMO is locked: XPI and SNIR valid - Unlocked(3): MIMO is not locked: XPI and SNIR not valid - Mute(4): MIMO is muted - NotApplicable(5): MIMO is disabled
| |||||||||||||||||||||
| CxfCarrierTermSNIR | 1.3.6.1.4.1.193.81.3.4.5.1.3.1.17 | Integer32 | RO | 0 | |||||||||||||||||
column · Integer32 · read-only · current Signal to Noise Interference Ratio (SNIR) in dB. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CxfCarrierTermXPI | 1.3.6.1.4.1.193.81.3.4.5.1.3.1.18 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current Cross-Polar Interference (XPI) level of the receiver in tenth of dB. | |||||||||||||||||||||
| CxfCarrierTermReset | 1.3.6.1.4.1.193.81.3.4.5.1.3.1.19 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current Reset command forces all the Carrier Termination settings to their own default.
| |||||||||||||||||||||
| CxfCarrierTermRestore | 1.3.6.1.4.1.193.81.3.4.5.1.3.1.20 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current Restore command clears RFloop, IFloop and turns RAU transmitter on.
| |||||||||||||||||||||
| CxfCarrierTermAutoRemoveLoopEnable | 1.3.6.1.4.1.193.81.3.4.5.1.3.1.21 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current Auto remove all RL loops after 15 minutes.
| |||||||||||||||||||||
| CxfCarrierTermBerAlarmThreshold | 1.3.6.1.4.1.193.81.3.4.5.1.3.1.22 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current Threshold for BER alarm. Default: ber1e3(2).
| |||||||||||||||||||||
| CxfCarrierTermActualRxACM | 1.3.6.1.4.1.193.81.3.4.5.1.3.1.23 | CarrierTermACMIndex | RO | ||||||||||||||||||
column · CarrierTermACMIndex · read-only · current It represents the actual (current) Rx ACM (Adaptive Code Modulation). | |||||||||||||||||||||
| CxfCarrierTermFeCTSeverity | 1.3.6.1.4.1.193.81.3.4.5.1.3.1.24 | Bits | RO | ||||||||||||||||||
column · Bits · read-only · current This object represents the highest severity of Far-End CT alarms and is populated only if Far-End terminal is represented by a Packet terminal (PT). Craft uses this MO to colour the box representing the Far-End CT in the hop view. In case of the Far-End is a TN, the remote highest alarm severity of CT is referred to the interfaces: RAU IF and RF IF.
| |||||||||||||||||||||
| TxfCarrierTerminationCapabilityTable | 1.3.6.1.4.1.193.81.3.4.5.1.4 | NA | |||||||||||||||||||
table · not-accessible · current This table is used to configure the Carrier Termination (CT). | |||||||||||||||||||||
| RxfCarrierTerminationCapabilityEntry | 1.3.6.1.4.1.193.81.3.4.5.1.4.1 | NA | |||||||||||||||||||
row · not-accessible · current An entry in the xfCarrierTerminationCapabilityTable. | |||||||||||||||||||||
| CxfRadioFrameId | 1.3.6.1.4.1.193.81.3.4.5.1.4.1.1 | Integer32 (1..2147483647) | RO | ||||||||||||||||||
column · Integer32 (1..2147483647) · read-only · current It represents the Radio Frame Id. | |||||||||||||||||||||
| CxfChannelSpacing | 1.3.6.1.4.1.193.81.3.4.5.1.4.1.2 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Channel spacing: - ETSI: 3.5, 7, 14, 28, 40, 56, 112 MHz - ANSI: 10, 20, 30, 40, 50, 60, 80 MHz
| |||||||||||||||||||||
| CxfFrameFormatType | 1.3.6.1.4.1.193.81.3.4.5.1.4.1.3 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current It represents the Frame Format type: - Standard - XPIC - MIMO - Long Haul Standard - Long Haul XPIC - XPIC on two boards - Long Haul XPIC on two boards
| |||||||||||||||||||||
| CxfMinACMCapacity | 1.3.6.1.4.1.193.81.3.4.5.1.4.1.4 | Integer32 (1..2147483647) | RO | ||||||||||||||||||
column · Integer32 (1..2147483647) · read-only · current It represents the minimum capacity designed for the specific frame format (Radio Frame Id). | |||||||||||||||||||||
| CxfMaxACMCapacity | 1.3.6.1.4.1.193.81.3.4.5.1.4.1.5 | Integer32 (1..2147483647) | RO | ||||||||||||||||||
column · Integer32 (1..2147483647) · read-only · current It represents the maximum capacity designed for the frame format (Radio Frame Id). | |||||||||||||||||||||
| CxfACMProfile | 1.3.6.1.4.1.193.81.3.4.5.1.4.1.6 | Bits | RO | ||||||||||||||||||
column · Bits · read-only · current It specifies which adaptive code and modulation profiles are supported.
| |||||||||||||||||||||
| TxfACMProfileCapacityTable | 1.3.6.1.4.1.193.81.3.4.5.1.5 | NA | |||||||||||||||||||
table · not-accessible · current This tables reports the ACM capacities of the selected Radio Frame Id per each Carrier Termination. | |||||||||||||||||||||
| RxfACMProfileCapacityEntry | 1.3.6.1.4.1.193.81.3.4.5.1.5.1 | NA | |||||||||||||||||||
row · not-accessible · current An entry in the xfACMProfileCapacityTable.
| |||||||||||||||||||||
| CxfACMIndex | 1.3.6.1.4.1.193.81.3.4.5.1.5.1.1 | CarrierTermACMIndex | RO | ||||||||||||||||||
column · CarrierTermACMIndex · read-only · current It represents the positional index of the bitmap xfACMProfile in xfCarrierTerminationCapabilityTable. | |||||||||||||||||||||
| CxfACMCapacity | 1.3.6.1.4.1.193.81.3.4.5.1.5.1.2 | Integer32 (0..2147483647) | RO | ||||||||||||||||||
column · Integer32 (0..2147483647) · read-only · current It represents the capacity in Kbps of the ACM profile identified by the positional index xfACMIndex of the xfACMProfile in xfCarrierTerminationCapabilityTable. Value 0 means that the ACM profile is not included in current Frame Format. | |||||||||||||||||||||
| TxfRLTTable | 1.3.6.1.4.1.193.81.3.4.5.1.6 | NA | |||||||||||||||||||
table · not-accessible · current This table is used to configure the Radio Link Terminal (RLT). | |||||||||||||||||||||
| RxfRLTEntry | 1.3.6.1.4.1.193.81.3.4.5.1.6.1 | NA | |||||||||||||||||||
| CrltEntLogicalIndex | 1.3.6.1.4.1.193.81.3.4.5.1.6.1.1 | Integer32 (1..2147483647) | RO | ||||||||||||||||||
column · Integer32 (1..2147483647) · read-only · current It represents the entLogicalIndex of the Radio Link Terminal (RLT). The logical entity identified by rltEntLogicalIndex is the same entity as identified by the same value of entLogicalIndex. | |||||||||||||||||||||
| CxfRLTDistinguishedName | 1.3.6.1.4.1.193.81.3.4.5.1.6.1.2 | DisplayString (SIZE (0..31)) | RO | ||||||||||||||||||
column · DisplayString (SIZE (0..31)) · read-only · current It represents the distinguished name of the Radio Link Terminal (RLT): Rack/Slot/RLT number. It is the ifName of RL-WAN i/f. | |||||||||||||||||||||
| CxfRLTIpAddress | 1.3.6.1.4.1.193.81.3.4.5.1.6.1.3 | IpAddress | RO | ||||||||||||||||||
column · IpAddress · read-only · current IPv4 address of the network element the Radio Link Terminal (RLT) belongs to. | |||||||||||||||||||||
| CxfRLTIPv6Address | 1.3.6.1.4.1.193.81.3.4.5.1.6.1.4 | InetAddressIPv6 | RO | ||||||||||||||||||
column · InetAddressIPv6 · read-only · current IPv6 Address of the network element the Radio Link Terminal (RLT) belongs to. | |||||||||||||||||||||
| CxfRLTNeName | 1.3.6.1.4.1.193.81.3.4.5.1.6.1.5 | DisplayString (SIZE (0..255)) | RO | ||||||||||||||||||
column · DisplayString (SIZE (0..255)) · read-only · current The name of the network element the Radio Link Terminal (RLT) belongs to (System Name - sysName). | |||||||||||||||||||||
| CxfRLTNeType | 1.3.6.1.4.1.193.81.3.4.5.1.6.1.6 | DisplayString (SIZE (0..255)) | RO | ||||||||||||||||||
column · DisplayString (SIZE (0..255)) · read-only · current The type of the network element the Radio Link Terminal (RLT) belongs to (System Descr - sysDescr). | |||||||||||||||||||||
| CxfRLTId | 1.3.6.1.4.1.193.81.3.4.5.1.6.1.7 | DisplayString (SIZE (0..31)) | RW | ||||||||||||||||||
column · DisplayString (SIZE (0..31)) · read-write · current Radio Link Terminal (RLT) identifier used for integrity check with far-end. | |||||||||||||||||||||
| CxfRLTExpectedFarEndId | 1.3.6.1.4.1.193.81.3.4.5.1.6.1.8 | DisplayString (SIZE (0..31)) | RW | ||||||||||||||||||
column · DisplayString (SIZE (0..31)) · read-write · current Expected Id of far-end Radio Link Terminal (RLT), used for integrity check with near-end. | |||||||||||||||||||||
| CxfRLTFarEndIdCheck | 1.3.6.1.4.1.193.81.3.4.5.1.6.1.9 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current When enabled, the system verifies that far-end Radio Link Terminal name is equal to the expected. If ok Radio Link Terminal status is UP. If not ok the Radio Link Terminal status is stated as DOWN. Default value: disabled.
| |||||||||||||||||||||
| CxfRLTStatus | 1.3.6.1.4.1.193.81.3.4.5.1.6.1.10 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current It represents the operational status of the Radio Link Terminal (RLT).
| |||||||||||||||||||||
| CxfRLTMode | 1.3.6.1.4.1.193.81.3.4.5.1.6.1.11 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current The mode of the Radio Link Terminal (RLT). Values: - 1+0: onePlusZero (default) - 1+1 RLP: onePlusOneRadioLinkProtection - 2+0 RLB: twoPlusZeroAdvancedRadioLinkBonding - 1+1 RLP EQP: onePlusOneRadioLinkProtectionAndEquipmentProtection - 2+0 RLB EQP: twoPlusZeroRadioLinkBondingAndEquipmentProtection - 2+2 RLP EQP: twoPlusTwoRadioLinkProtectionAndEquipmentProtection - 4+0 RLB EQP: fourPlusZeroRadioLinkBondingAndEquipmentProtection
| |||||||||||||||||||||
| CxfRLTActualTXTotalCapacity | 1.3.6.1.4.1.193.81.3.4.5.1.6.1.12 | Gauge32 | RO | ||||||||||||||||||
column · Gauge32 · read-only · current It represents the total transmitted capacity throughput (considering both Packet and TDM traffic), expressed in bps, of the Radio Link Terminal (RLT). | |||||||||||||||||||||
| CxfRLTActualTXPacketCapacity | 1.3.6.1.4.1.193.81.3.4.5.1.6.1.13 | Gauge32 | RO | ||||||||||||||||||
column · Gauge32 · read-only · current It represents the transmitted packet capacity throughput (only packet traffic), expressed in bps, of the Radio Link Terminal (RLT). | |||||||||||||||||||||
| CxfRLTLimitedTotalCapacity | 1.3.6.1.4.1.193.81.3.4.5.1.6.1.14 | Gauge32 | RO | ||||||||||||||||||
column · Gauge32 · read-only · current It represents the total transmitted capacity throughput (considering both Packet and TDM traffic), expressed in bps, of the Radio Link Terminal (RLT) limited by License. | |||||||||||||||||||||
| CxfRLTRltSeverity | 1.3.6.1.4.1.193.81.3.4.5.1.6.1.15 | Bits | RO | ||||||||||||||||||
column · Bits · read-only · current This object represents the highest severity alarm related to RLT with logical index 'rltEntLogicalIndex'. Node GUI uses the Far-End entry value (of this MIB MO) to define the colour of the Far-End RLT box in the hop view.
| |||||||||||||||||||||
| CxfRLTCapability | 1.3.6.1.4.1.193.81.3.4.5.1.6.1.16 | Bits | RO | ||||||||||||||||||
column · Bits · read-only · current Each bit of this object represents an RLT capability: Bit 0 - XPIC capability Bit 1 - TDM capability Bit 2 - CsPlurality capability Bit 3 - CtAutoSelection capability Bit 4 - OnePlusZero capability Bit 5 - OnePlusOneRadioLinkProtection capability Bit 6 - TwoPlusZeroAdvancedRadioLinkBonding capability Bit 7 - OnePlusOneRadioLinkProtectionWithEQP capability Bit 8 - TwoPlusZeroRadioLinkBondingWithEQP capability Bit 9 - TwoPlusTwoRadioLinkProtectionWithEQP capability Bit 10 - FourPlusZeroRadioLinkBondingWithEQP capability Bit 11 - XPIC between boards capability Bit 12 - XPIC Members Auto Selection capability Bit 13 - Manual EQP Switch capability Bit 14 - Enhanced ACM Protection: Maximum Capacity capability Bit 15 - Enhanced ACM Protection: Maximum Protection capability Bit 16 - Radio Link Encryption capability Bit 17 - MIMO capability Bit 18 - TX swicthover and SSD capability
| |||||||||||||||||||||
| CxfRLTInventoryLastChange | 1.3.6.1.4.1.193.81.3.4.5.1.6.1.17 | TimeTicks | RO | ||||||||||||||||||
column · TimeTicks · read-only · current The value of sysUpTime at the time of the last creation or deletion of an entry in the xfRLTHierarchyModuleTable. If the current state was entered prior to the last re-initialization of the local network management subsystem, then this object contains a zero value. | |||||||||||||||||||||
| CxfRLTCpriMode | 1.3.6.1.4.1.193.81.3.4.5.1.6.1.18 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Set the mode of the CPRI front-haul product. Default: notApplicable. | |||||||||||||||||||||
| CxfRLTReset | 1.3.6.1.4.1.193.81.3.4.5.1.6.1.19 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current It resets RLT to default configuration.
| |||||||||||||||||||||
| CxfRLTMeasuredHopLength | 1.3.6.1.4.1.193.81.3.4.5.1.6.1.20 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current It represents the measured value of the radio hop length expressed in Km. Values: - Radio hop length measurement not yet available: -1; - Measured hop length in Km: > 0. | |||||||||||||||||||||
| TxfTrafficTable | 1.3.6.1.4.1.193.81.3.4.5.1.7 | NA | |||||||||||||||||||
table · not-accessible · current This table is used to map the TDM interface to the specified RLT. | |||||||||||||||||||||
| RxfTrafficEntry | 1.3.6.1.4.1.193.81.3.4.5.1.7.1 | NA | |||||||||||||||||||
| CtrEntLogicalIndex | 1.3.6.1.4.1.193.81.3.4.5.1.7.1.1 | Integer32 (1..2147483647) | RO | ||||||||||||||||||
column · Integer32 (1..2147483647) · read-only · current It represents the entLogicalIndex of the Radio Link Terminal (RLT). The logical entity identified by trEntLogicalIndex is the same interface as identified by the same value of entLogicalIndex. | |||||||||||||||||||||
| CxfTDMEnable | 1.3.6.1.4.1.193.81.3.4.5.1.7.1.2 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current It allows to map TDM interface to a specific Radio Link Terminal (RLT). Default: disable.
| |||||||||||||||||||||
| TxfRLTDMIfTable | 1.3.6.1.4.1.193.81.3.4.5.1.8 | NA | |||||||||||||||||||
table · not-accessible · current This table is an extention of the ifTable used to configure TDM interface. | |||||||||||||||||||||
| RxfRLTDMIfEntry | 1.3.6.1.4.1.193.81.3.4.5.1.8.1 | NA | |||||||||||||||||||
| CxfRLTDMIfIndex | 1.3.6.1.4.1.193.81.3.4.5.1.8.1.1 | Integer32 (1..2147483647) | RO | ||||||||||||||||||
column · Integer32 (1..2147483647) · read-only · current It is the ifIndex of RL TDM I/F table. | |||||||||||||||||||||
| CxfActualTDMCapacity | 1.3.6.1.4.1.193.81.3.4.5.1.8.1.2 | Integer32 (0..2147483647) | RO | ||||||||||||||||||
column · Integer32 (0..2147483647) · read-only · current It represents the current tributary capacity. | |||||||||||||||||||||
| CxfWantedTDMAllocation | 1.3.6.1.4.1.193.81.3.4.5.1.8.1.3 | Bits | RW | ||||||||||||||||||
column · Bits · read-write · current It represents the wanted tributary allocation.
| |||||||||||||||||||||
| CxfActualTDMAllocation | 1.3.6.1.4.1.193.81.3.4.5.1.8.1.4 | Bits | RO | ||||||||||||||||||
column · Bits · read-only · current It represents the actual tributary allocation.
| |||||||||||||||||||||
| CxfTDMIfAlarms | 1.3.6.1.4.1.193.81.3.4.5.1.8.1.5 | Bits | RO | ||||||||||||||||||
column · Bits · read-only · current This object shows TDM if related alarms.
| |||||||||||||||||||||
| CxfTDMRxLoop | 1.3.6.1.4.1.193.81.3.4.5.1.8.1.6 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current It configures TDM RX loop: - other(1) - enable(2) - disable(3) (default)
| |||||||||||||||||||||
| CxfTDMDistinguishedName | 1.3.6.1.4.1.193.81.3.4.5.1.8.1.7 | DisplayString (SIZE (0..31)) | RO | ||||||||||||||||||
column · DisplayString (SIZE (0..31)) · read-only · current It is the disinguished name of TDM i/f, i.e. R/S/P. | |||||||||||||||||||||
| CxfTDMMaxTributaries | 1.3.6.1.4.1.193.81.3.4.5.1.8.1.8 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current It represents the maximum number of tributaries that can be allocated to TDM i/f, depending on frame ID, minimum ACM profile configured and licensed capacity in each CTs of the RLT. The maximum number is limited to 80. | |||||||||||||||||||||
| CxfTDMHopLength | 1.3.6.1.4.1.193.81.3.4.5.1.8.1.9 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current It represents the length of the radio hop expressed in Km. This is used to calculate the propagation delay over the radio hop that shall be compensated to guarantee TDM traffic error free. Values: - default value for delay compensation: -1 - admissible range of values in Km: 0-200 | |||||||||||||||||||||
| TxfCGIfTable | 1.3.6.1.4.1.193.81.3.4.5.1.9 | NA | |||||||||||||||||||
table · not-accessible · current This table is an extension of ifTable reporting the main characteristics of CG i/f. | |||||||||||||||||||||
| RxfCGIfEntry | 1.3.6.1.4.1.193.81.3.4.5.1.9.1 | NA | |||||||||||||||||||
| CxfCGIfIndex | 1.3.6.1.4.1.193.81.3.4.5.1.9.1.1 | Integer32 (1..2147483647) | RO | ||||||||||||||||||
column · Integer32 (1..2147483647) · read-only · current It is the ifIndex of CG interface. | |||||||||||||||||||||
| CxfCGIfMinSpeed | 1.3.6.1.4.1.193.81.3.4.5.1.9.1.2 | Integer32 (1..2147483647) | RO | ||||||||||||||||||
column · Integer32 (1..2147483647) · read-only · current The minimum speed (throughput) of this interface expressed in bit/s, including both Ethernet and TDM capacities. Note: in case of bonding configurations, it represents the minimum of the min speeds of all Carrier Terminations in the bonding group. | |||||||||||||||||||||
| CxfCGIfMaxSpeed | 1.3.6.1.4.1.193.81.3.4.5.1.9.1.3 | Gauge32 | RO | ||||||||||||||||||
column · Gauge32 · read-only · current The maximum speed (throughput) of this interface expressed in bit/s, including both Ethernet and TDM capacities. Note: in case of bonding configurations, it represents the sum of the max speeds of all Carrier Terminations in the bonding group. | |||||||||||||||||||||
| CxfCGIfRCNum | 1.3.6.1.4.1.193.81.3.4.5.1.9.1.4 | INTEGER (1..16) | RO | ||||||||||||||||||
column · INTEGER (1..16) · read-only · current Number of Carrier Termination members belonging to the CG group. | |||||||||||||||||||||
| CxfCGIfAlarms | 1.3.6.1.4.1.193.81.3.4.5.1.9.1.5 | Bits | RO | ||||||||||||||||||
column · Bits · read-only · current This object shows CG i/f related alarms.
| |||||||||||||||||||||
| CxfCGIfHopViewStatus | 1.3.6.1.4.1.193.81.3.4.5.1.9.1.6 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current This object represents the Hop View status. Up: Far-End is reachable Down: Far-End not reachable The status is related to HCC-NE alarm.
| |||||||||||||||||||||
| TxfXPICPairTable | 1.3.6.1.4.1.193.81.3.4.5.1.10 | NA | |||||||||||||||||||
table · not-accessible · current This table is used to enable XPIC (Admid Status) and set the CT pair in XPIC. | |||||||||||||||||||||
| RxfXPICPairEntry | 1.3.6.1.4.1.193.81.3.4.5.1.10.1 | NA | |||||||||||||||||||
| CxpicPairEntLogicalIIndex | 1.3.6.1.4.1.193.81.3.4.5.1.10.1.1 | Integer32 (1..2147483647) | RO | ||||||||||||||||||
column · Integer32 (1..2147483647) · read-only · current It represents the entLogicalIndex of the Radio Link Terminal (RLT). The logical entity identified by xpicPairEntLogicalIIndex is the same entity as identified by the same value of entLogicalIndex. | |||||||||||||||||||||
| CxfXPICPairAdminStatus | 1.3.6.1.4.1.193.81.3.4.5.1.10.1.2 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current Administrative status of XPIC pair. Default value: disable.
| |||||||||||||||||||||
| CxfXPICPairNumber | 1.3.6.1.4.1.193.81.3.4.5.1.10.1.3 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current It specifies the number used for identification of the XPIC pair. | |||||||||||||||||||||
| CxfXPICPairRecovery | 1.3.6.1.4.1.193.81.3.4.5.1.10.1.4 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current It allows to enable/disable the recovery procedure when XPIC mode is enabled.
| |||||||||||||||||||||
| CxfXPICPairRestore | 1.3.6.1.4.1.193.81.3.4.5.1.10.1.5 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current Restore XPIC functionality after XPIC recovery has been triggered and resets XPIC Auto Restore procedure
| |||||||||||||||||||||
| CxfXPICCTmember1 | 1.3.6.1.4.1.193.81.3.4.5.1.10.1.6 | DisplayString (SIZE (0..31)) | RW | ||||||||||||||||||
column · DisplayString (SIZE (0..31)) · read-write · current It specifies the first Carrier Termination (CT) member of the XPIC pair. The member is identified by the CT distinguished name (R/S/P). | |||||||||||||||||||||
| CxfXPICCTmember2 | 1.3.6.1.4.1.193.81.3.4.5.1.10.1.7 | DisplayString (SIZE (0..31)) | RW | ||||||||||||||||||
column · DisplayString (SIZE (0..31)) · read-write · current It specifies the second Carrier Termination (CT) member of the XPIC pair. The member is identified by the CT distinguished name (R/S/P). | |||||||||||||||||||||
| CxfXPICAutoRestore | 1.3.6.1.4.1.193.81.3.4.5.1.10.1.8 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current It enable/disables the XPIC Auto Recovery procedure.
| |||||||||||||||||||||
| CxfXpicPairIndex | 1.3.6.1.4.1.193.81.3.4.5.1.10.1.9 | INTEGER (1..10) | RO | ||||||||||||||||||
column · INTEGER (1..10) · read-only · current It represents the table second index and is used to index the XPIC pair associated to Radio Link Terminal (RLT) with entLogicalIndex equal to xpicPairEntLogicalIIndex. It has been introduce to support configurations like 4+0 RLB EQP, 2+2 RLP EQP. | |||||||||||||||||||||
| TxfMIMOGroupTable | 1.3.6.1.4.1.193.81.3.4.5.1.11 | NA | |||||||||||||||||||
table · not-accessible · current This table is used to enable MIMO (Admid Status) and set the CTs in MIMO group. | |||||||||||||||||||||
| RxfMIMOGroupEntry | 1.3.6.1.4.1.193.81.3.4.5.1.11.1 | NA | |||||||||||||||||||
| CmimoGroupEntLogicalIIndex | 1.3.6.1.4.1.193.81.3.4.5.1.11.1.1 | Integer32 (1..2147483647) | RO | ||||||||||||||||||
column · Integer32 (1..2147483647) · read-only · current It represents the entLogicalIndex of the Radio Link Terminal (RLT). The logical entity identified by mimoGroupEntLogicalIIndex is the same entity as identified by the same value of entLogicalIndex. | |||||||||||||||||||||
| CxfMIMOGroupAdminStatus | 1.3.6.1.4.1.193.81.3.4.5.1.11.1.2 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current Administrative status of MIMO group. Default value: disable.
| |||||||||||||||||||||
| CxfMIMOGroupNumber | 1.3.6.1.4.1.193.81.3.4.5.1.11.1.3 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current It specifies the Number used for identification of the MIMO group. | |||||||||||||||||||||
| CxfMIMOGroupRecovery | 1.3.6.1.4.1.193.81.3.4.5.1.11.1.4 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current It allows to enable/disable the recovery procedure when MIMO mode is enabled.
| |||||||||||||||||||||
| CxfMIMOGroupRestore | 1.3.6.1.4.1.193.81.3.4.5.1.11.1.5 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current Restore MIMO functionality after MIMO recovery has been triggered.
| |||||||||||||||||||||
| CxfMIMOCTmember1 | 1.3.6.1.4.1.193.81.3.4.5.1.11.1.6 | DisplayString (SIZE (0..31)) | RO | ||||||||||||||||||
column · DisplayString (SIZE (0..31)) · read-only · current It specifies the first Carrier Termination (CT) member of the MIMO group. The member is identified by the CT distinguished name (R/S/P). | |||||||||||||||||||||
| CxfMIMOCTmember2 | 1.3.6.1.4.1.193.81.3.4.5.1.11.1.7 | DisplayString (SIZE (0..31)) | RO | ||||||||||||||||||
column · DisplayString (SIZE (0..31)) · read-only · current It specifies the second Carrier Termination (CT) member of the MIMO group. The member is identified by the CT distinguished name (R/S/P). | |||||||||||||||||||||
| CxfMIMOCTmember3 | 1.3.6.1.4.1.193.81.3.4.5.1.11.1.8 | DisplayString (SIZE (0..31)) | RO | ||||||||||||||||||
column · DisplayString (SIZE (0..31)) · read-only · current It specifies the third Carrier Termination (CT) member of the MIMO group. The member is identified by the CT distinguished name (R/S/P). | |||||||||||||||||||||
| CxfMIMOCTmember4 | 1.3.6.1.4.1.193.81.3.4.5.1.11.1.9 | DisplayString (SIZE (0..31)) | RO | ||||||||||||||||||
column · DisplayString (SIZE (0..31)) · read-only · current It specifies the forth Carrier Termination (CT) member of the MIMO group. The member is identified by the CT distinguished name (R/S/P). | |||||||||||||||||||||
| TxfRLWANIfTable | 1.3.6.1.4.1.193.81.3.4.5.1.12 | NA | |||||||||||||||||||
table · not-accessible · current This table is used to handle the RL-WAN i/f. | |||||||||||||||||||||
| RxfRLWANIfEntry | 1.3.6.1.4.1.193.81.3.4.5.1.12.1 | NA | |||||||||||||||||||
| CxfRLWANIfIndex | 1.3.6.1.4.1.193.81.3.4.5.1.12.1.1 | Integer32 (1..2147483647) | RO | ||||||||||||||||||
column · Integer32 (1..2147483647) · read-only · current It is the table index. It contains the ifIndex value of the WAN interface. | |||||||||||||||||||||
| CxfRLWANDistinguishedName | 1.3.6.1.4.1.193.81.3.4.5.1.12.1.2 | DisplayString (SIZE (0..31)) | RO | ||||||||||||||||||
column · DisplayString (SIZE (0..31)) · read-only · current It is the name uniquely identifying the RL-WAN interface within the system, i.e. R/S/P. | |||||||||||||||||||||
| CxfRLWANCompAdminStatus | 1.3.6.1.4.1.193.81.3.4.5.1.12.1.3 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current It enables and disables MLHC and PLC on the RL-WAN interface. down(2): both MLHC and PLC are disabled. mlhcUp(3): only MLHC is enabled. mlhcPlcUp(4): both MLHC and PLC are enabled. Default:down(2). Compression can be enabled on only one of the two RL-WAN interfaces belonging to the same MMU. Any attempt to enable compression on both RL-WAN interfaces belonging to the same MMU is refused.
| |||||||||||||||||||||
| CxfRLWANCompConnStatus | 1.3.6.1.4.1.193.81.3.4.5.1.12.1.4 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current It specifies if the compression building block is physically connected to the RL-WAN interface. Physical connection of the compression building block to the RL-WAN interface is pre-requisite for enabling compression. When xfRLWANCompAdminStatus is set either to mlhcUp or mlhcPlcUp, the compression building block is physically connected to RL-WAN interfaces and xfRLWANCompConnStatus becomes connected. When xfRLWANCompAdminStatus is set either to mlhcUp or mlhcPlcUp on the other RL-WAN interface, the compression building block is physically connected to the other RL-WAN interfaces and xfRLWANCompConnStatus becomes disconnected.
| |||||||||||||||||||||
| CxfRLWANMlhcMplsMode | 1.3.6.1.4.1.193.81.3.4.5.1.12.1.5 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current It specifies the wanted mpls mode. mplsOnly(2): Ethernet customer bridge, provider bridge and QinQ headers, including MPLS labels (up to 3) are compressed. controlWord(3): L2 VPN with Pseudo-Wire Control Word headers are compressed. l2(4): L2 VPN without Pseudo-Wire Control Word headers are compressed. l3(5): L3 VPN headers are compressed. Default: mplsOnly(2). This can be configured only if compression administrative status is down.
| |||||||||||||||||||||
| CxfRLWANMlhcOperStatus | 1.3.6.1.4.1.193.81.3.4.5.1.12.1.6 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Multi-Layer Header Compression operative status.
| |||||||||||||||||||||
| CxfRLWANPlcOperStatus | 1.3.6.1.4.1.193.81.3.4.5.1.12.1.7 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Payload Compression operative status.
| |||||||||||||||||||||
| CxfRLWANActualCapacity | 1.3.6.1.4.1.193.81.3.4.5.1.12.1.8 | Gauge32 | RO | ||||||||||||||||||
column · Gauge32 · read-only · current Actual Capacity (speed) of RL WAN interface, in bps. | |||||||||||||||||||||
| CxfRLWANLimitedCapacity | 1.3.6.1.4.1.193.81.3.4.5.1.12.1.9 | Gauge32 | RO | ||||||||||||||||||
column · Gauge32 · read-only · current Capacity (speed) limited by license of RL WAN interface, in bps. | |||||||||||||||||||||
| TxfRLTHierarchyModuleTable | 1.3.6.1.4.1.193.81.3.4.5.1.13 | NA | |||||||||||||||||||
table · not-accessible · current This table is used to handle Module (MMU - RAU) hierarchy for the specific RLT. | |||||||||||||||||||||
| RxfRLTHierarchyModuleEntry | 1.3.6.1.4.1.193.81.3.4.5.1.13.1 | NA | |||||||||||||||||||
row · not-accessible · current An entry in the xfRLTHierarchyModuleTable.
| |||||||||||||||||||||
| CxfRLTMHIndex | 1.3.6.1.4.1.193.81.3.4.5.1.13.1.1 | Integer32 (1..2147483647) | RO | ||||||||||||||||||
column · Integer32 (1..2147483647) · read-only · current It is the table index. It contains the entPhisycalIndex of the WAN port associated to the RLT. | |||||||||||||||||||||
| CxfRLTModuleIndex | 1.3.6.1.4.1.193.81.3.4.5.1.13.1.2 | Integer32 (1..1000) | RO | ||||||||||||||||||
column · Integer32 (1..1000) · read-only · current It is the table index. It is a sequential number referred to the module (entity), either MMU or RAU, constituting the RLT. | |||||||||||||||||||||
| CxfRLTEntPhysicalIndex | 1.3.6.1.4.1.193.81.3.4.5.1.13.1.3 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current This MO represents the value of entPhysicalIndex of the module, either MMU or RAU, constituting the RLT. | |||||||||||||||||||||
| CxfRLTPhysicalCointainedIn | 1.3.6.1.4.1.193.81.3.4.5.1.13.1.4 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current This MO represents the value of entPhysicalIndex for the physical entity which 'contains' this physical entity, which is either MMU or RAU (constituting the RLT). | |||||||||||||||||||||
| CxfRLTPhysicalParentRelPos | 1.3.6.1.4.1.193.81.3.4.5.1.13.1.5 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current This MO represents the indication of the relative position of this 'child' component among all its 'sibling' components. | |||||||||||||||||||||
| CxfRLTEntityPhysicalDescr | 1.3.6.1.4.1.193.81.3.4.5.1.13.1.6 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current This MO represents a textual description of physical entity (module), either MMU or RAU, constituting the RLT. | |||||||||||||||||||||
| CxfRLTModuleSlotPosition | 1.3.6.1.4.1.193.81.3.4.5.1.13.1.7 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current This MO represents the slot position of the physical entity (module), either MMU or RAU, constituting the RLT. | |||||||||||||||||||||
| CxfRLTFEDistinguishedName | 1.3.6.1.4.1.193.81.3.4.5.1.13.1.8 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current This MO represents the distinguished name of the Near-End logical entity, either RLT or CT. | |||||||||||||||||||||
| CxfRLTNEDistinguishedName | 1.3.6.1.4.1.193.81.3.4.5.1.13.1.9 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current This MO represents the distinguished name of the Far-End logical entity, either RLT or CT. | |||||||||||||||||||||
| CxfRLTInterfaceIndex | 1.3.6.1.4.1.193.81.3.4.5.1.13.1.10 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current This MO represents the value of ifIndex of the interface, either CG IF (Bonding/RLP) or RAU IF, constituting the RLT. | |||||||||||||||||||||
| CxfRLTHighestSeverityAlarm | 1.3.6.1.4.1.193.81.3.4.5.1.13.1.11 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current This MO reports the highest severity of the alarms active in the physical module, MMU or RAU, it refers to. Value list: - critical(0): highest severity is Critical; - major(1): highest severity is Major; - minor(2): highest severity is Minor; - warning(3): highest severity is Warning; - clear(4): no alarm.
| |||||||||||||||||||||
| TxfRLTProtectionTable | 1.3.6.1.4.1.193.81.3.4.5.1.14 | NA | |||||||||||||||||||
table · not-accessible · current This table is used to handle RL Protection for the RLT whose mode is set 1+1RLP. | |||||||||||||||||||||
| RxfRLTProtectionEntry | 1.3.6.1.4.1.193.81.3.4.5.1.14.1 | NA | |||||||||||||||||||
| CxfRLTProtIndex | 1.3.6.1.4.1.193.81.3.4.5.1.14.1.1 | Integer32 (1..2147483647) | RO | ||||||||||||||||||
column · Integer32 (1..2147483647) · read-only · current It is the table index. It contains the entity logical index of the RLT configured in 1+1RLP. | |||||||||||||||||||||
| CxfRLTProtectionSwitchMode | 1.3.6.1.4.1.193.81.3.4.5.1.14.1.2 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current The mode in which the switching mechanism is configured.
Auto: System automatically switches from the degraded to the other transmitter (Tx).
Manual: Automatic switching is disabled and operator can select Tx manually.
Auto & Revertive: makes it possible to manually set the preferred Tx.
TX switch disable: Selective Space Diverity, SSD.
RLP TX switch is disabled.
The two received signals, from different paths, are combined.
Default: AUTO (for RLT mode RLP) & NA (default for RLT mode RLB).
| |||||||||||||||||||||
| CxfRLTProtectionStatus | 1.3.6.1.4.1.193.81.3.4.5.1.14.1.3 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Status of the protection, when configured in a protected mode. Values: - unprotected; - protected - unableToProtect Note: Applicable only when RLT-mode is RL protection.
| |||||||||||||||||||||
| CxfRLTRevertivePreferredTX | 1.3.6.1.4.1.193.81.3.4.5.1.14.1.4 | DisplayString (SIZE (0..31)) | RW | ||||||||||||||||||
column · DisplayString (SIZE (0..31)) · read-write · current It specifies the preferred TX Radio Carrier Termination (CT) in revertive protection mode. The member is identified by the CT distinguished name (R/S/P). | |||||||||||||||||||||
| CxfRLTProtectionWaitToRestoreTime | 1.3.6.1.4.1.193.81.3.4.5.1.14.1.5 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current The time, in # of seconds, to wait before switching back to the preferred Tx in Auto & Revertive mode. Default: 0. | |||||||||||||||||||||
| CxfRLTFadeNotificationTimer | 1.3.6.1.4.1.193.81.3.4.5.1.14.1.6 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current Notifications for alarms caused by fading, with a duration less than the specified time (0 - 1000 seconds) are not sent. Only applicable for protected configurations. Default: 200. | |||||||||||||||||||||
| CxfRLTManualSwitchCommand | 1.3.6.1.4.1.193.81.3.4.5.1.14.1.7 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current Used to request a TX switch-over. Applicable for protected configurations and when protectionSwitchMode is set to Manual. Not Applicable for RLT mode RLB Value: - txManualSwitch - txManualNoSwitch.
| |||||||||||||||||||||
| CxfRLTTxSwitchOverConfiguration | 1.3.6.1.4.1.193.81.3.4.5.1.14.1.8 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current Enable or disable the function to switch TX on a request from far-end, including also the TX switchover alarm notifications , both local and remote. Only applicable in RLT mode RLP. Values: - notSupported: (default for RLT in RLB mode) - enable: TX switchover triggered by local and remote faults - disable: TX switchover disabled(default for RLT in RLP mode) - DEPRECATED - enableLocal: TX switchover triggered by local faults only (default for RLT in RLP mode)
| |||||||||||||||||||||
| CxfRLTTxSwitchOverAlarmReset | 1.3.6.1.4.1.193.81.3.4.5.1.14.1.9 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current Used to manual reset the TX switch-over alarm and Remote TX switchover alarm (consequently to TX switch ordered from far-end). Note: the alarm is raised when TX Switch far-end function is enabled (xfRLTTxSwitchOverConfiguration). Value: - txSwitchOverAlarmNoReset - txSwitchOverAlarmReset.
| |||||||||||||||||||||
| CxfRLTNumOfRLPSwitch | 1.3.6.1.4.1.193.81.3.4.5.1.14.1.10 | Integer32 (0..2147483647) | RO | ||||||||||||||||||
column · Integer32 (0..2147483647) · read-only · current It represents the number of RLP Radio TX switch. | |||||||||||||||||||||
| CxfRLTEnhancedACMProtectionMode | 1.3.6.1.4.1.193.81.3.4.5.1.14.1.11 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current It configures the enhanced ACM protection mode. The enhanced ACM protection uses RX indicators from both the working and the protection links
to select an ACM profile to optimize capacity (throughput) and/or protection (robustness).
Values:
- Active Transmitter : ACM engine determines the ACM profile according to the working Rx ACM indications only;
- Maximum Capacity (default): Working Rx ACM engine is aware of the ACM profile requests from the
protection Rx ACM engine, and determines the highest ACM profile between
the working and the protection links;
- Maximum Protection : Working Rx ACM engine is aware of the protection Rx ACM engine's ACM
profile requests, and determines the lowest ACM profile between the working
and the protection links.
| |||||||||||||||||||||
| CxfRLTEnhancedACMProtectionOperStatus | 1.3.6.1.4.1.193.81.3.4.5.1.14.1.12 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Status of the enhanched ACM protection engine, when ACM engine is configured either in maximum-troughtput or maximum-protection mode.
Values:
- notApplicable : when enhanced ACM protection mode is basic;
- enhAcmProtActive : when the enhanced ACM engine is working and the highest ACM profile is selected
between the working and the protection links;
- enhAcmProtNotActive: when the enhanced ACM engine is not working.
| |||||||||||||||||||||
| TxfRLTEncryptionTable | 1.3.6.1.4.1.193.81.3.4.5.1.15 | NA | |||||||||||||||||||
table · not-accessible · current This table is used to handle Radio Link Encryption. | |||||||||||||||||||||
| RxfRLTEncryptionEntry | 1.3.6.1.4.1.193.81.3.4.5.1.15.1 | NA | |||||||||||||||||||
| CxfRLTEncryptionIndex | 1.3.6.1.4.1.193.81.3.4.5.1.15.1.1 | Integer32 (1..2147483647) | RO | ||||||||||||||||||
column · Integer32 (1..2147483647) · read-only · current It represents the xfRLTEncryptionTable index and is the RLT entity logical index. | |||||||||||||||||||||
| CxfRLTEncryptionAdminStatus | 1.3.6.1.4.1.193.81.3.4.5.1.15.1.2 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current This MO allows to enable/disable the Encryption of both control and traffic plain over the Radio Link hop. Values: - enable; - disable. Default: DISABLE.
| |||||||||||||||||||||
| CxfRLTEncryptionOperStatus | 1.3.6.1.4.1.193.81.3.4.5.1.15.1.3 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current This MO represents the Operative Status of the Encryption function over the Radio Link hop and refers to receiving direction. Therefore, it indicates if the receiving side is able or not able to correctly/successfully decipher the ciphered data stream transmitted from remote side.. The ecryption status can assume the values: - up: control and traffic plain are correctly deciphered; - down: control and traffic plain are not deciphered correctly/successfully, due to e.g. authentication failure, disturbance over the radio-hop.
| |||||||||||||||||||||
| CxfRLTEncryptionMasterKey | 1.3.6.1.4.1.193.81.3.4.5.1.15.1.4 | DisplayString (SIZE (0..63)) | RW | ||||||||||||||||||
column · DisplayString (SIZE (0..63)) · read-write · current This MO allows to define the Master Key used to initiate the Encryption operation. Master Key is hidden. | |||||||||||||||||||||
| NxfRadioLinkRltPmObjects | 1.3.6.1.4.1.193.81.3.4.5.2 | ||||||||||||||||||||
| TxfRLPMContinuousCounterTable | 1.3.6.1.4.1.193.81.3.4.5.2.1 | NA | |||||||||||||||||||
table · not-accessible · current Table for RLT performance data. | |||||||||||||||||||||
| RxfRLPMContinuousCounterEntry | 1.3.6.1.4.1.193.81.3.4.5.2.1.1 | NA | |||||||||||||||||||
| CxfPMTimeElapsed | 1.3.6.1.4.1.193.81.3.4.5.2.1.1.1 | PerfIntervalCount | RO | 1228622 | |||||||||||||||||
column · PerfIntervalCount · read-only · current The number of seconds that have elapsed since the beginning of the current error-measurement period. If the current interval exceeds the maximum value, the agent will return the maximum value. Reset by xfPMPerfReset. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CxfPMCurrentES | 1.3.6.1.4.1.193.81.3.4.5.2.1.1.2 | PerfCurrentCount | RO | 58 | |||||||||||||||||
column · PerfCurrentCount · read-only · current This object shows the errored seconds. Reset by xfPMPerfReset. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CxfPMCurrentSES | 1.3.6.1.4.1.193.81.3.4.5.2.1.1.3 | PerfCurrentCount | RO | 6 | |||||||||||||||||
column · PerfCurrentCount · read-only · current This object shows the severely errored seconds. Reset by xfPMPerfReset. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CxfPMCurrentBBE | 1.3.6.1.4.1.193.81.3.4.5.2.1.1.4 | HCPerfCurrentCount | RO | 30420 | |||||||||||||||||
column · HCPerfCurrentCount · read-only · current This object shows the background block errors. Reset by xfPMPerfReset. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CxfPMCurrentUAS | 1.3.6.1.4.1.193.81.3.4.5.2.1.1.5 | PerfCurrentCount | RO | 161023 | |||||||||||||||||
column · PerfCurrentCount · read-only · current This object shows the unavailable seconds (or unavailable time). Reset by xfPMPerfReset. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CxfPMCurrentBB | 1.3.6.1.4.1.193.81.3.4.5.2.1.1.6 | HCPerfCurrentCount | RO | 28217053395 | |||||||||||||||||
column · HCPerfCurrentCount · read-only · current This object shows the background blocks. Reset by xfPMPerfReset. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CxfPMPerfReset | 1.3.6.1.4.1.193.81.3.4.5.2.1.1.7 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current This object is used to reset the performance counters:
- Elapsed Time, ES, SES, BBE, BB
- PM ACM
- ETSI - EN 301 129 (TLTS, RLTS, ...) current/interval 15m/24h
- Max and Min XPI/MSE current/interval 15m/24h
It can be also set when the RAU is not present.
Near end access: read-write.
| |||||||||||||||||||||
| CxfPMCurrentESR | 1.3.6.1.4.1.193.81.3.4.5.2.1.1.8 | PerfCurrentCount | RO | ||||||||||||||||||
column · PerfCurrentCount · read-only · current The ratio of ES to total seconds in available time during a fixed measurement interval. Reset by xfPMPerfReset. | |||||||||||||||||||||
| CxfPMCurrentSESR | 1.3.6.1.4.1.193.81.3.4.5.2.1.1.9 | PerfCurrentCount | RO | ||||||||||||||||||
column · PerfCurrentCount · read-only · current The ratio of SES to total seconds in available time during a fixed measurement interval. Reset by xfPMPerfReset. | |||||||||||||||||||||
| CxfPMCurrentBBER | 1.3.6.1.4.1.193.81.3.4.5.2.1.1.10 | HCPerfCurrentCount | RO | ||||||||||||||||||
column · HCPerfCurrentCount · read-only · current The ratio of Background Block Errors (BBE) to total blocks in available time during a fixed measurement interval. Reset by xfPMPerfReset. | |||||||||||||||||||||
| TxfRLPMACMConfigTable | 1.3.6.1.4.1.193.81.3.4.5.2.2 | NA | |||||||||||||||||||
table · not-accessible · current Alarm threshold values for RL PM. | |||||||||||||||||||||
| RxfRLPMACMConfigEntry | 1.3.6.1.4.1.193.81.3.4.5.2.2.1 | NA | |||||||||||||||||||
| CxfPMACMSetThreshold15m | 1.3.6.1.4.1.193.81.3.4.5.2.2.1.1 | Integer32 | RW | ||||||||||||||||||
column · Integer32 · read-write · current The 15 minute set threshold for minimum modulation. Near end access: read-write. Far end access: no access. Default value is 180. | |||||||||||||||||||||
| CxfPMACMSetThreshold24h | 1.3.6.1.4.1.193.81.3.4.5.2.2.1.2 | Integer32 | RW | ||||||||||||||||||
column · Integer32 · read-write · current The 24 hour set threshold for minimum modulation. Near end access: read-write. Far end access: no access. Default value is 1500. | |||||||||||||||||||||
| CxfPMACMResetThreshold15m | 1.3.6.1.4.1.193.81.3.4.5.2.2.1.3 | Integer32 | RW | ||||||||||||||||||
column · Integer32 · read-write · current The 15 minute reset threshold for minimum modulation. Near end access: read-write. Far end access: no access. Default value is 20. | |||||||||||||||||||||
| CxfPMACMStatus | 1.3.6.1.4.1.193.81.3.4.5.2.2.1.4 | Bits | RO | ||||||||||||||||||
column · Bits · read-only · current It reports threshold crossing alarm status:
- acm15m: ACM 15 min threshold crossing: ACM has been in the lowest configured profile
for a number of seconds exceeding the configured 15 min threshold.
- acm24h: ACM 24 hour threshold crossing: ACM has been in the lowest configured profile
for a number of seconds exceeding the configured 24 hour threshold.
| |||||||||||||||||||||
| CxfPMACMValidData | 1.3.6.1.4.1.193.81.3.4.5.2.2.1.5 | Bits | RO | ||||||||||||||||||
column · Bits · read-only · current It reports which ACM's PM data are valid.
| |||||||||||||||||||||
| TxfRLPMACMCurrent24hTable | 1.3.6.1.4.1.193.81.3.4.5.2.3 | NA | |||||||||||||||||||
table · not-accessible · current ACM-based counters for current 24h table. | |||||||||||||||||||||
| RxfRLPMACMCurrent24hEntry | 1.3.6.1.4.1.193.81.3.4.5.2.3.1 | NA | |||||||||||||||||||
| CxfPMACMCurrent24h4QAMStrong | 1.3.6.1.4.1.193.81.3.4.5.2.3.1.1 | PerfCurrentCount | RO | ||||||||||||||||||
column · PerfCurrentCount · read-only · current Valid time since reset. | |||||||||||||||||||||
| CxfPMACMCurrent24h4QAMStd | 1.3.6.1.4.1.193.81.3.4.5.2.3.1.2 | PerfCurrentCount | RO | ||||||||||||||||||
column · PerfCurrentCount · read-only · current Valid time since reset. | |||||||||||||||||||||
| CxfPMACMCurrent24h4QAMLight | 1.3.6.1.4.1.193.81.3.4.5.2.3.1.3 | PerfCurrentCount | RO | ||||||||||||||||||
column · PerfCurrentCount · read-only · current Valid time since reset. | |||||||||||||||||||||
| CxfPMACMCurrent24h16QAMStrong | 1.3.6.1.4.1.193.81.3.4.5.2.3.1.4 | PerfCurrentCount | RO | ||||||||||||||||||
column · PerfCurrentCount · read-only · current Valid time since reset. | |||||||||||||||||||||
| CxfPMACMCurrent24h16QAMStd | 1.3.6.1.4.1.193.81.3.4.5.2.3.1.5 | PerfCurrentCount | RO | ||||||||||||||||||
column · PerfCurrentCount · read-only · current Valid time since reset. | |||||||||||||||||||||
| CxfPMACMCurrent24h16QAMLight | 1.3.6.1.4.1.193.81.3.4.5.2.3.1.6 | PerfCurrentCount | RO | ||||||||||||||||||
column · PerfCurrentCount · read-only · current Valid time since reset. | |||||||||||||||||||||
| CxfPMACMCurrent24h32QAMStrong | 1.3.6.1.4.1.193.81.3.4.5.2.3.1.7 | PerfCurrentCount | RO | ||||||||||||||||||
column · PerfCurrentCount · read-only · current Valid time since reset. | |||||||||||||||||||||
| CxfPMACMCurrent24h32QAMStd | 1.3.6.1.4.1.193.81.3.4.5.2.3.1.8 | PerfCurrentCount | RO | ||||||||||||||||||
column · PerfCurrentCount · read-only · current Valid time since reset. | |||||||||||||||||||||
| CxfPMACMCurrent24h32QAMLight | 1.3.6.1.4.1.193.81.3.4.5.2.3.1.9 | PerfCurrentCount | RO | ||||||||||||||||||
column · PerfCurrentCount · read-only · current Valid time since reset. | |||||||||||||||||||||
| CxfPMACMCurrent24h64QAMStrong | 1.3.6.1.4.1.193.81.3.4.5.2.3.1.10 | PerfCurrentCount | RO | ||||||||||||||||||
column · PerfCurrentCount · read-only · current Valid time since reset. | |||||||||||||||||||||
| CxfPMACMCurrent24h64QAMStd | 1.3.6.1.4.1.193.81.3.4.5.2.3.1.11 | PerfCurrentCount | RO | ||||||||||||||||||
column · PerfCurrentCount · read-only · current Valid time since reset. | |||||||||||||||||||||
| CxfPMACMCurrent24h64QAMLight | 1.3.6.1.4.1.193.81.3.4.5.2.3.1.12 | PerfCurrentCount | RO | ||||||||||||||||||
column · PerfCurrentCount · read-only · current Valid time since reset. | |||||||||||||||||||||
| CxfPMACMCurrent24h128QAMStrong | 1.3.6.1.4.1.193.81.3.4.5.2.3.1.13 | PerfCurrentCount | RO | ||||||||||||||||||
column · PerfCurrentCount · read-only · current Valid time since reset. | |||||||||||||||||||||
| CxfPMACMCurrent24h128QAMStd | 1.3.6.1.4.1.193.81.3.4.5.2.3.1.14 | PerfCurrentCount | RO | ||||||||||||||||||
column · PerfCurrentCount · read-only · current Valid time since reset. | |||||||||||||||||||||
| CxfPMACMCurrent24h128QAMLight | 1.3.6.1.4.1.193.81.3.4.5.2.3.1.15 | PerfCurrentCount | RO | ||||||||||||||||||
column · PerfCurrentCount · read-only · current Valid time since reset. | |||||||||||||||||||||
| CxfPMACMCurrent24h256QAMStrong | 1.3.6.1.4.1.193.81.3.4.5.2.3.1.16 | PerfCurrentCount | RO | ||||||||||||||||||
column · PerfCurrentCount · read-only · current Valid time since reset. | |||||||||||||||||||||
| CxfPMACMCurrent24h256QAMStd | 1.3.6.1.4.1.193.81.3.4.5.2.3.1.17 | PerfCurrentCount | RO | ||||||||||||||||||
column · PerfCurrentCount · read-only · current Valid time since reset. | |||||||||||||||||||||
| CxfPMACMCurrent24h256QAMLight | 1.3.6.1.4.1.193.81.3.4.5.2.3.1.18 | PerfCurrentCount | RO | ||||||||||||||||||
column · PerfCurrentCount · read-only · current Valid time since reset. | |||||||||||||||||||||
| CxfPMACMCurrent24h512QAMStrong | 1.3.6.1.4.1.193.81.3.4.5.2.3.1.19 | PerfCurrentCount | RO | ||||||||||||||||||
column · PerfCurrentCount · read-only · current Valid time since reset. | |||||||||||||||||||||
| CxfPMACMCurrent24h512QAMStd | 1.3.6.1.4.1.193.81.3.4.5.2.3.1.20 | PerfCurrentCount | RO | ||||||||||||||||||
column · PerfCurrentCount · read-only · current Valid time since reset. | |||||||||||||||||||||
| CxfPMACMCurrent24h512QAMLight | 1.3.6.1.4.1.193.81.3.4.5.2.3.1.21 | PerfCurrentCount | RO | ||||||||||||||||||
column · PerfCurrentCount · read-only · current Valid time since reset. | |||||||||||||||||||||
| CxfPMACMCurrent24h1024QAMStrong | 1.3.6.1.4.1.193.81.3.4.5.2.3.1.22 | PerfCurrentCount | RO | ||||||||||||||||||
column · PerfCurrentCount · read-only · current Valid time since reset. | |||||||||||||||||||||
| CxfPMACMCurrent24h1024QAMStd | 1.3.6.1.4.1.193.81.3.4.5.2.3.1.23 | PerfCurrentCount | RO | ||||||||||||||||||
column · PerfCurrentCount · read-only · current Valid time since reset. | |||||||||||||||||||||
| CxfPMACMCurrent24h1024QAMLight | 1.3.6.1.4.1.193.81.3.4.5.2.3.1.24 | PerfCurrentCount | RO | ||||||||||||||||||
column · PerfCurrentCount · read-only · current Valid time since reset. | |||||||||||||||||||||
| CxfPMACMCurrent24h2048QAMStrong | 1.3.6.1.4.1.193.81.3.4.5.2.3.1.25 | PerfCurrentCount | RO | ||||||||||||||||||
column · PerfCurrentCount · read-only · current Valid time since reset. | |||||||||||||||||||||
| CxfPMACMCurrent24h2048QAMStd | 1.3.6.1.4.1.193.81.3.4.5.2.3.1.26 | PerfCurrentCount | RO | ||||||||||||||||||
column · PerfCurrentCount · read-only · current Valid time since reset. | |||||||||||||||||||||
| CxfPMACMCurrent24h2048QAMLight | 1.3.6.1.4.1.193.81.3.4.5.2.3.1.27 | PerfCurrentCount | RO | ||||||||||||||||||
column · PerfCurrentCount · read-only · current Valid time since reset. | |||||||||||||||||||||
| CxfPMACMCurrent24h4096QAMStrong | 1.3.6.1.4.1.193.81.3.4.5.2.3.1.28 | PerfCurrentCount | RO | ||||||||||||||||||
column · PerfCurrentCount · read-only · current Valid time since reset. | |||||||||||||||||||||
| CxfPMACMCurrent24h4096QAMStd | 1.3.6.1.4.1.193.81.3.4.5.2.3.1.29 | PerfCurrentCount | RO | ||||||||||||||||||
column · PerfCurrentCount · read-only · current Valid time since reset. | |||||||||||||||||||||
| CxfPMACMCurrent24h4096QAMLight | 1.3.6.1.4.1.193.81.3.4.5.2.3.1.30 | PerfCurrentCount | RO | ||||||||||||||||||
column · PerfCurrentCount · read-only · current Valid time since reset. | |||||||||||||||||||||
| CxfPMACMCurrent24h8192QAMStrong | 1.3.6.1.4.1.193.81.3.4.5.2.3.1.31 | PerfCurrentCount | RO | ||||||||||||||||||
column · PerfCurrentCount · read-only · current Valid time since reset. | |||||||||||||||||||||
| CxfPMACMCurrent24h8192QAMStd | 1.3.6.1.4.1.193.81.3.4.5.2.3.1.32 | PerfCurrentCount | RO | ||||||||||||||||||
column · PerfCurrentCount · read-only · current Valid time since reset. | |||||||||||||||||||||
| CxfPMACMCurrent24h8192QAMLight | 1.3.6.1.4.1.193.81.3.4.5.2.3.1.33 | PerfCurrentCount | RO | ||||||||||||||||||
column · PerfCurrentCount · read-only · current Valid time since reset. | |||||||||||||||||||||
| CxfPMACMCurrent24h16384QAMStrong | 1.3.6.1.4.1.193.81.3.4.5.2.3.1.34 | PerfCurrentCount | RO | ||||||||||||||||||
column · PerfCurrentCount · read-only · current Valid time since reset. | |||||||||||||||||||||
| CxfPMACMCurrent24h16384QAMStd | 1.3.6.1.4.1.193.81.3.4.5.2.3.1.35 | PerfCurrentCount | RO | ||||||||||||||||||
column · PerfCurrentCount · read-only · current Valid time since reset. | |||||||||||||||||||||
| CxfPMACMCurrent24h16384QAMLight | 1.3.6.1.4.1.193.81.3.4.5.2.3.1.36 | PerfCurrentCount | RO | ||||||||||||||||||
column · PerfCurrentCount · read-only · current Valid time since reset. | |||||||||||||||||||||
| TxfRLPMACMInterval24hTable | 1.3.6.1.4.1.193.81.3.4.5.2.4 | NA | |||||||||||||||||||
table · not-accessible · current ACM-based counters for interval 24h table. | |||||||||||||||||||||
| RxfRLPMACMInterval24hEntry | 1.3.6.1.4.1.193.81.3.4.5.2.4.1 | NA | |||||||||||||||||||
| CxfPMACMInterval24h4QAMStrong | 1.3.6.1.4.1.193.81.3.4.5.2.4.1.1 | PerfIntervalCount | RO | ||||||||||||||||||
column · PerfIntervalCount · read-only · current Interval count. | |||||||||||||||||||||
| CxfPMACMInterval24h4QAMStd | 1.3.6.1.4.1.193.81.3.4.5.2.4.1.2 | PerfIntervalCount | RO | ||||||||||||||||||
column · PerfIntervalCount · read-only · current Interval count. | |||||||||||||||||||||
| CxfPMACMInterval24h4QAMLight | 1.3.6.1.4.1.193.81.3.4.5.2.4.1.3 | PerfIntervalCount | RO | ||||||||||||||||||
column · PerfIntervalCount · read-only · current Interval count. | |||||||||||||||||||||
| CxfPMACMInterval24h16QAMStrong | 1.3.6.1.4.1.193.81.3.4.5.2.4.1.4 | PerfIntervalCount | RO | ||||||||||||||||||
column · PerfIntervalCount · read-only · current Interval count. | |||||||||||||||||||||
| CxfPMACMInterval24h16QAMStd | 1.3.6.1.4.1.193.81.3.4.5.2.4.1.5 | PerfIntervalCount | RO | ||||||||||||||||||
column · PerfIntervalCount · read-only · current Interval count. | |||||||||||||||||||||
| CxfPMACMInterval24h16QAMLight | 1.3.6.1.4.1.193.81.3.4.5.2.4.1.6 | PerfIntervalCount | RO | ||||||||||||||||||
column · PerfIntervalCount · read-only · current Interval count. | |||||||||||||||||||||
| CxfPMACMInterval24h32QAMStrong | 1.3.6.1.4.1.193.81.3.4.5.2.4.1.7 | PerfIntervalCount | RO | ||||||||||||||||||
column · PerfIntervalCount · read-only · current Interval count. | |||||||||||||||||||||
| CxfPMACMInterval24h32QAMStd | 1.3.6.1.4.1.193.81.3.4.5.2.4.1.8 | PerfIntervalCount | RO | ||||||||||||||||||
column · PerfIntervalCount · read-only · current Interval count. | |||||||||||||||||||||
| CxfPMACMInterval24h32QAMLight | 1.3.6.1.4.1.193.81.3.4.5.2.4.1.9 | PerfIntervalCount | RO | ||||||||||||||||||
column · PerfIntervalCount · read-only · current Interval count. | |||||||||||||||||||||
| CxfPMACMInterval24h64QAMStrong | 1.3.6.1.4.1.193.81.3.4.5.2.4.1.10 | PerfIntervalCount | RO | ||||||||||||||||||
column · PerfIntervalCount · read-only · current Interval count. | |||||||||||||||||||||
| CxfPMACMInterval24h64QAMStd | 1.3.6.1.4.1.193.81.3.4.5.2.4.1.11 | PerfIntervalCount | RO | ||||||||||||||||||
column · PerfIntervalCount · read-only · current Interval count. | |||||||||||||||||||||
| CxfPMACMInterval24h64QAMLight | 1.3.6.1.4.1.193.81.3.4.5.2.4.1.12 | PerfIntervalCount | RO | ||||||||||||||||||
column · PerfIntervalCount · read-only · current Interval count. | |||||||||||||||||||||
| CxfPMACMInterval24h128QAMStrong | 1.3.6.1.4.1.193.81.3.4.5.2.4.1.13 | PerfIntervalCount | RO | ||||||||||||||||||
column · PerfIntervalCount · read-only · current Interval count. | |||||||||||||||||||||
| CxfPMACMInterval24h128QAMStd | 1.3.6.1.4.1.193.81.3.4.5.2.4.1.14 | PerfIntervalCount | RO | ||||||||||||||||||
column · PerfIntervalCount · read-only · current Interval count. | |||||||||||||||||||||
| CxfPMACMInterval24h128QAMLight | 1.3.6.1.4.1.193.81.3.4.5.2.4.1.15 | PerfIntervalCount | RO | ||||||||||||||||||
column · PerfIntervalCount · read-only · current Interval count. | |||||||||||||||||||||
| CxfPMACMInterval24h256QAMStrong | 1.3.6.1.4.1.193.81.3.4.5.2.4.1.16 | PerfIntervalCount | RO | ||||||||||||||||||
column · PerfIntervalCount · read-only · current Interval count. | |||||||||||||||||||||
| CxfPMACMInterval24h256QAMStd | 1.3.6.1.4.1.193.81.3.4.5.2.4.1.17 | PerfIntervalCount | RO | ||||||||||||||||||
column · PerfIntervalCount · read-only · current Interval count. | |||||||||||||||||||||
| CxfPMACMInterval24h256QAMLight | 1.3.6.1.4.1.193.81.3.4.5.2.4.1.18 | PerfIntervalCount | RO | ||||||||||||||||||
column · PerfIntervalCount · read-only · current Interval count. | |||||||||||||||||||||
| CxfPMACMInterval24h512QAMStrong | 1.3.6.1.4.1.193.81.3.4.5.2.4.1.19 | PerfIntervalCount | RO | ||||||||||||||||||
column · PerfIntervalCount · read-only · current Interval count. | |||||||||||||||||||||
| CxfPMACMInterval24h512QAMStd | 1.3.6.1.4.1.193.81.3.4.5.2.4.1.20 | PerfIntervalCount | RO | ||||||||||||||||||
column · PerfIntervalCount · read-only · current Interval count. | |||||||||||||||||||||
| CxfPMACMInterval24h512QAMLight | 1.3.6.1.4.1.193.81.3.4.5.2.4.1.21 | PerfIntervalCount | RO | ||||||||||||||||||
column · PerfIntervalCount · read-only · current Interval count. | |||||||||||||||||||||
| CxfPMACMInterval24h1024QAMStrong | 1.3.6.1.4.1.193.81.3.4.5.2.4.1.22 | PerfIntervalCount | RO | ||||||||||||||||||
column · PerfIntervalCount · read-only · current Interval count. | |||||||||||||||||||||
| CxfPMACMInterval24h1024QAMStd | 1.3.6.1.4.1.193.81.3.4.5.2.4.1.23 | PerfIntervalCount | RO | ||||||||||||||||||
column · PerfIntervalCount · read-only · current Interval count. | |||||||||||||||||||||
| CxfPMACMInterval24h1024QAMLight | 1.3.6.1.4.1.193.81.3.4.5.2.4.1.24 | PerfIntervalCount | RO | ||||||||||||||||||
column · PerfIntervalCount · read-only · current Interval count. | |||||||||||||||||||||
| CxfPMACMInterval24h2048QAMStrong | 1.3.6.1.4.1.193.81.3.4.5.2.4.1.25 | PerfIntervalCount | RO | ||||||||||||||||||
column · PerfIntervalCount · read-only · current Interval count. | |||||||||||||||||||||
| CxfPMACMInterval24h2048QAMStd | 1.3.6.1.4.1.193.81.3.4.5.2.4.1.26 | PerfIntervalCount | RO | ||||||||||||||||||
column · PerfIntervalCount · read-only · current Interval count. | |||||||||||||||||||||
| CxfPMACMInterval24h2048QAMLight | 1.3.6.1.4.1.193.81.3.4.5.2.4.1.27 | PerfIntervalCount | RO | ||||||||||||||||||
column · PerfIntervalCount · read-only · current Interval count. | |||||||||||||||||||||
| CxfPMACMInterval24h4096QAMStrong | 1.3.6.1.4.1.193.81.3.4.5.2.4.1.28 | PerfIntervalCount | RO | ||||||||||||||||||
column · PerfIntervalCount · read-only · current Interval count. | |||||||||||||||||||||
| CxfPMACMInterval24h4096QAMStd | 1.3.6.1.4.1.193.81.3.4.5.2.4.1.29 | PerfIntervalCount | RO | ||||||||||||||||||
column · PerfIntervalCount · read-only · current Interval count. | |||||||||||||||||||||
| CxfPMACMInterval24h4096QAMLight | 1.3.6.1.4.1.193.81.3.4.5.2.4.1.30 | PerfIntervalCount | RO | ||||||||||||||||||
column · PerfIntervalCount · read-only · current Interval count. | |||||||||||||||||||||
| CxfPMACMInterval24hValidData | 1.3.6.1.4.1.193.81.3.4.5.2.4.1.31 | TruthValue | RO | ||||||||||||||||||
column · TruthValue · read-only · current This variable indicates whether the data for this interval is valid. | |||||||||||||||||||||
| CxfPMACMInterval24h8192QAMStrong | 1.3.6.1.4.1.193.81.3.4.5.2.4.1.32 | PerfIntervalCount | RO | ||||||||||||||||||
column · PerfIntervalCount · read-only · current Interval count. | |||||||||||||||||||||
| CxfPMACMInterval24h8192QAMStd | 1.3.6.1.4.1.193.81.3.4.5.2.4.1.33 | PerfIntervalCount | RO | ||||||||||||||||||
column · PerfIntervalCount · read-only · current Interval count. | |||||||||||||||||||||
| CxfPMACMInterval24h8192QAMLight | 1.3.6.1.4.1.193.81.3.4.5.2.4.1.34 | PerfIntervalCount | RO | ||||||||||||||||||
column · PerfIntervalCount · read-only · current Interval count. | |||||||||||||||||||||
| CxfPMACMInterval24h16384QAMStrong | 1.3.6.1.4.1.193.81.3.4.5.2.4.1.35 | PerfIntervalCount | RO | ||||||||||||||||||
column · PerfIntervalCount · read-only · current Interval count. | |||||||||||||||||||||
| CxfPMACMInterval24h16384QAMStd | 1.3.6.1.4.1.193.81.3.4.5.2.4.1.36 | PerfIntervalCount | RO | ||||||||||||||||||
column · PerfIntervalCount · read-only · current Interval count. | |||||||||||||||||||||
| CxfPMACMInterval24h16384QAMLight | 1.3.6.1.4.1.193.81.3.4.5.2.4.1.37 | PerfIntervalCount | RO | ||||||||||||||||||
column · PerfIntervalCount · read-only · current Interval count. | |||||||||||||||||||||
| TxfRLPMACMCurrent15mTable | 1.3.6.1.4.1.193.81.3.4.5.2.5 | NA | |||||||||||||||||||
table · not-accessible · current ACM-based counters for current 15m table. | |||||||||||||||||||||
| RxfRLPMACMCurrent15mEntry | 1.3.6.1.4.1.193.81.3.4.5.2.5.1 | NA | |||||||||||||||||||
| CxfPMACMCurrent15m4QAMStrong | 1.3.6.1.4.1.193.81.3.4.5.2.5.1.1 | PerfCurrentCount | RO | ||||||||||||||||||
column · PerfCurrentCount · read-only · current Valid interval time since reset. | |||||||||||||||||||||
| CxfPMACMCurrent15m4QAMStd | 1.3.6.1.4.1.193.81.3.4.5.2.5.1.2 | PerfCurrentCount | RO | ||||||||||||||||||
column · PerfCurrentCount · read-only · current Valid interval time since reset. | |||||||||||||||||||||
| CxfPMACMCurrent15m4QAMLight | 1.3.6.1.4.1.193.81.3.4.5.2.5.1.3 | PerfCurrentCount | RO | ||||||||||||||||||
column · PerfCurrentCount · read-only · current Valid interval time since reset. | |||||||||||||||||||||
| CxfPMACMCurrent15m16QAMStrong | 1.3.6.1.4.1.193.81.3.4.5.2.5.1.4 | PerfCurrentCount | RO | ||||||||||||||||||
column · PerfCurrentCount · read-only · current Valid interval time since reset. | |||||||||||||||||||||
| CxfPMACMCurrent15m16QAMStd | 1.3.6.1.4.1.193.81.3.4.5.2.5.1.5 | PerfCurrentCount | RO | ||||||||||||||||||
column · PerfCurrentCount · read-only · current Valid interval time since reset. | |||||||||||||||||||||
| CxfPMACMCurrent15m16QAMLight | 1.3.6.1.4.1.193.81.3.4.5.2.5.1.6 | PerfCurrentCount | RO | ||||||||||||||||||
column · PerfCurrentCount · read-only · current Valid interval time since reset. | |||||||||||||||||||||
| CxfPMACMCurrent15m32QAMStrong | 1.3.6.1.4.1.193.81.3.4.5.2.5.1.7 | PerfCurrentCount | RO | ||||||||||||||||||
column · PerfCurrentCount · read-only · current Valid interval time since reset. | |||||||||||||||||||||
| CxfPMACMCurrent15m32QAMStd | 1.3.6.1.4.1.193.81.3.4.5.2.5.1.8 | PerfCurrentCount | RO | ||||||||||||||||||
column · PerfCurrentCount · read-only · current Valid interval time since reset. | |||||||||||||||||||||
| CxfPMACMCurrent15m32QAMLight | 1.3.6.1.4.1.193.81.3.4.5.2.5.1.9 | PerfCurrentCount | RO | ||||||||||||||||||
column · PerfCurrentCount · read-only · current Valid interval time since reset. | |||||||||||||||||||||
| CxfPMACMCurrent15m64QAMStrong | 1.3.6.1.4.1.193.81.3.4.5.2.5.1.10 | PerfCurrentCount | RO | ||||||||||||||||||
column · PerfCurrentCount · read-only · current Valid interval time since reset. | |||||||||||||||||||||
| CxfPMACMCurrent15m64QAMStd | 1.3.6.1.4.1.193.81.3.4.5.2.5.1.11 | PerfCurrentCount | RO | ||||||||||||||||||
column · PerfCurrentCount · read-only · current Valid interval time since reset. | |||||||||||||||||||||
| CxfPMACMCurrent15m64QAMLight | 1.3.6.1.4.1.193.81.3.4.5.2.5.1.12 | PerfCurrentCount | RO | ||||||||||||||||||
column · PerfCurrentCount · read-only · current Valid interval time since reset. | |||||||||||||||||||||
| CxfPMACMCurrent15m128QAMStrong | 1.3.6.1.4.1.193.81.3.4.5.2.5.1.13 | PerfCurrentCount | RO | ||||||||||||||||||
column · PerfCurrentCount · read-only · current Valid interval time since reset. | |||||||||||||||||||||
| CxfPMACMCurrent15m128QAMStd | 1.3.6.1.4.1.193.81.3.4.5.2.5.1.14 | PerfCurrentCount | RO | ||||||||||||||||||
column · PerfCurrentCount · read-only · current Valid interval time since reset. | |||||||||||||||||||||
| CxfPMACMCurrent15m128QAMLight | 1.3.6.1.4.1.193.81.3.4.5.2.5.1.15 | PerfCurrentCount | RO | ||||||||||||||||||
column · PerfCurrentCount · read-only · current Valid interval time since reset. | |||||||||||||||||||||
| CxfPMACMCurrent15m256QAMStrong | 1.3.6.1.4.1.193.81.3.4.5.2.5.1.16 | PerfCurrentCount | RO | ||||||||||||||||||
column · PerfCurrentCount · read-only · current Valid interval time since reset. | |||||||||||||||||||||
| CxfPMACMCurrent15m256QAMStd | 1.3.6.1.4.1.193.81.3.4.5.2.5.1.17 | PerfCurrentCount | RO | ||||||||||||||||||
column · PerfCurrentCount · read-only · current Valid interval time since reset. | |||||||||||||||||||||
| CxfPMACMCurrent15m256QAMLight | 1.3.6.1.4.1.193.81.3.4.5.2.5.1.18 | PerfCurrentCount | RO | ||||||||||||||||||
column · PerfCurrentCount · read-only · current Valid interval time since reset. | |||||||||||||||||||||
| CxfPMACMCurrent15m512QAMStrong | 1.3.6.1.4.1.193.81.3.4.5.2.5.1.19 | PerfCurrentCount | RO | ||||||||||||||||||
column · PerfCurrentCount · read-only · current Valid interval time since reset. | |||||||||||||||||||||
| CxfPMACMCurrent15m512QAMStd | 1.3.6.1.4.1.193.81.3.4.5.2.5.1.20 | PerfCurrentCount | RO | ||||||||||||||||||
column · PerfCurrentCount · read-only · current Valid interval time since reset. | |||||||||||||||||||||
| CxfPMACMCurrent15m512QAMLight | 1.3.6.1.4.1.193.81.3.4.5.2.5.1.21 | PerfCurrentCount | RO | ||||||||||||||||||
column · PerfCurrentCount · read-only · current Valid interval time since reset. | |||||||||||||||||||||
| CxfPMACMCurrent15m1024QAMStrong | 1.3.6.1.4.1.193.81.3.4.5.2.5.1.22 | PerfCurrentCount | RO | ||||||||||||||||||
column · PerfCurrentCount · read-only · current Valid interval time since reset. | |||||||||||||||||||||
| CxfPMACMCurrent15m1024QAMStd | 1.3.6.1.4.1.193.81.3.4.5.2.5.1.23 | PerfCurrentCount | RO | ||||||||||||||||||
column · PerfCurrentCount · read-only · current Valid interval time since reset. | |||||||||||||||||||||
| CxfPMACMCurrent15m1024QAMLight | 1.3.6.1.4.1.193.81.3.4.5.2.5.1.24 | PerfCurrentCount | RO | ||||||||||||||||||
column · PerfCurrentCount · read-only · current Valid interval time since reset. | |||||||||||||||||||||
| CxfPMACMCurrent15m2048QAMStrong | 1.3.6.1.4.1.193.81.3.4.5.2.5.1.25 | PerfCurrentCount | RO | ||||||||||||||||||
column · PerfCurrentCount · read-only · current Valid interval time since reset. | |||||||||||||||||||||
| CxfPMACMCurrent15m2048QAMStd | 1.3.6.1.4.1.193.81.3.4.5.2.5.1.26 | PerfCurrentCount | RO | ||||||||||||||||||
column · PerfCurrentCount · read-only · current Valid interval time since reset. | |||||||||||||||||||||
| CxfPMACMCurrent15m2048QAMLight | 1.3.6.1.4.1.193.81.3.4.5.2.5.1.27 | PerfCurrentCount | RO | ||||||||||||||||||
column · PerfCurrentCount · read-only · current Valid interval time since reset. | |||||||||||||||||||||
| CxfPMACMCurrent15m4096QAMStrong | 1.3.6.1.4.1.193.81.3.4.5.2.5.1.28 | PerfCurrentCount | RO | ||||||||||||||||||
column · PerfCurrentCount · read-only · current Valid interval time since reset. | |||||||||||||||||||||
| CxfPMACMCurrent15m4096QAMStd | 1.3.6.1.4.1.193.81.3.4.5.2.5.1.29 | PerfCurrentCount | RO | ||||||||||||||||||
column · PerfCurrentCount · read-only · current Valid interval time since reset. | |||||||||||||||||||||
| CxfPMACMCurrent15m4096QAMLight | 1.3.6.1.4.1.193.81.3.4.5.2.5.1.30 | PerfCurrentCount | RO | ||||||||||||||||||
column · PerfCurrentCount · read-only · current Valid interval time since reset. | |||||||||||||||||||||
| CxfPMACMCurrent15m8192QAMStrong | 1.3.6.1.4.1.193.81.3.4.5.2.5.1.31 | PerfCurrentCount | RO | ||||||||||||||||||
column · PerfCurrentCount · read-only · current Valid interval time since reset. | |||||||||||||||||||||
| CxfPMACMCurrent15m8192QAMStd | 1.3.6.1.4.1.193.81.3.4.5.2.5.1.32 | PerfCurrentCount | RO | ||||||||||||||||||
column · PerfCurrentCount · read-only · current Valid interval time since reset. | |||||||||||||||||||||
| CxfPMACMCurrent15m8192QAMLight | 1.3.6.1.4.1.193.81.3.4.5.2.5.1.33 | PerfCurrentCount | RO | ||||||||||||||||||
column · PerfCurrentCount · read-only · current Valid interval time since reset. | |||||||||||||||||||||
| CxfPMACMCurrent15m16384QAMStrong | 1.3.6.1.4.1.193.81.3.4.5.2.5.1.34 | PerfCurrentCount | RO | ||||||||||||||||||
column · PerfCurrentCount · read-only · current Valid interval time since reset. | |||||||||||||||||||||
| CxfPMACMCurrent15m16384QAMStd | 1.3.6.1.4.1.193.81.3.4.5.2.5.1.35 | PerfCurrentCount | RO | ||||||||||||||||||
column · PerfCurrentCount · read-only · current Valid interval time since reset. | |||||||||||||||||||||
| CxfPMACMCurrent15m16384QAMLight | 1.3.6.1.4.1.193.81.3.4.5.2.5.1.36 | PerfCurrentCount | RO | ||||||||||||||||||
column · PerfCurrentCount · read-only · current Valid interval time since reset. | |||||||||||||||||||||
| TxfRLPMACMInterval15mTable | 1.3.6.1.4.1.193.81.3.4.5.2.6 | NA | |||||||||||||||||||
table · not-accessible · current ACM-based counters for interval 15m table. | |||||||||||||||||||||
| RxfRLPMACMInterval15mEntry | 1.3.6.1.4.1.193.81.3.4.5.2.6.1 | NA | |||||||||||||||||||
| CxfPMACMInterval15mIntervalNumber | 1.3.6.1.4.1.193.81.3.4.5.2.6.1.1 | Integer32 (1..96) | RO | ||||||||||||||||||
column · Integer32 (1..96) · read-only · current A number between 1 and 96, which identifies the interval for which the set of statistics is available. The interval identified by 1 is the most recently completed 15 minute interval, and the interval identified by N is the interval immediately preceding the one identified by N-1. | |||||||||||||||||||||
| CxfPMACMInterval15m4QAMStrong | 1.3.6.1.4.1.193.81.3.4.5.2.6.1.2 | PerfIntervalCount | RO | ||||||||||||||||||
column · PerfIntervalCount · read-only · current Interval count. | |||||||||||||||||||||
| CxfPMACMInterval15m4QAMStd | 1.3.6.1.4.1.193.81.3.4.5.2.6.1.3 | PerfIntervalCount | RO | ||||||||||||||||||
column · PerfIntervalCount · read-only · current Interval count. | |||||||||||||||||||||
| CxfPMACMInterval15m4QAMLight | 1.3.6.1.4.1.193.81.3.4.5.2.6.1.4 | PerfIntervalCount | RO | ||||||||||||||||||
column · PerfIntervalCount · read-only · current Interval count. | |||||||||||||||||||||
| CxfPMACMInterval15m16QAMStrong | 1.3.6.1.4.1.193.81.3.4.5.2.6.1.5 | PerfIntervalCount | RO | ||||||||||||||||||
column · PerfIntervalCount · read-only · current Interval count. | |||||||||||||||||||||
| CxfPMACMInterval15m16QAMStd | 1.3.6.1.4.1.193.81.3.4.5.2.6.1.6 | PerfIntervalCount | RO | ||||||||||||||||||
column · PerfIntervalCount · read-only · current Interval count. | |||||||||||||||||||||
| CxfPMACMInterval15m16QAMLight | 1.3.6.1.4.1.193.81.3.4.5.2.6.1.7 | PerfIntervalCount | RO | ||||||||||||||||||
column · PerfIntervalCount · read-only · current Interval count. | |||||||||||||||||||||
| CxfPMACMInterval15m32QAMStrong | 1.3.6.1.4.1.193.81.3.4.5.2.6.1.8 | PerfIntervalCount | RO | ||||||||||||||||||
column · PerfIntervalCount · read-only · current Interval count. | |||||||||||||||||||||
| CxfPMACMInterval15m32QAMStd | 1.3.6.1.4.1.193.81.3.4.5.2.6.1.9 | PerfIntervalCount | RO | ||||||||||||||||||
column · PerfIntervalCount · read-only · current Interval count. | |||||||||||||||||||||
| CxfPMACMInterval15m32QAMLight | 1.3.6.1.4.1.193.81.3.4.5.2.6.1.10 | PerfIntervalCount | RO | ||||||||||||||||||
column · PerfIntervalCount · read-only · current Interval count. | |||||||||||||||||||||
| CxfPMACMInterval15m64QAMStrong | 1.3.6.1.4.1.193.81.3.4.5.2.6.1.11 | PerfIntervalCount | RO | ||||||||||||||||||
column · PerfIntervalCount · read-only · current Interval count. | |||||||||||||||||||||
| CxfPMACMInterval15m64QAMStd | 1.3.6.1.4.1.193.81.3.4.5.2.6.1.12 | PerfIntervalCount | RO | ||||||||||||||||||
column · PerfIntervalCount · read-only · current Interval count. | |||||||||||||||||||||
| CxfPMACMInterval15m64QAMLight | 1.3.6.1.4.1.193.81.3.4.5.2.6.1.13 | PerfIntervalCount | RO | ||||||||||||||||||
column · PerfIntervalCount · read-only · current Interval count. | |||||||||||||||||||||
| CxfPMACMInterval15m128QAMStrong | 1.3.6.1.4.1.193.81.3.4.5.2.6.1.14 | PerfIntervalCount | RO | ||||||||||||||||||
column · PerfIntervalCount · read-only · current Interval count. | |||||||||||||||||||||
| CxfPMACMInterval15m128QAMStd | 1.3.6.1.4.1.193.81.3.4.5.2.6.1.15 | PerfIntervalCount | RO | ||||||||||||||||||
column · PerfIntervalCount · read-only · current Interval count. | |||||||||||||||||||||
| CxfPMACMInterval15m128QAMLight | 1.3.6.1.4.1.193.81.3.4.5.2.6.1.16 | PerfIntervalCount | RO | ||||||||||||||||||
column · PerfIntervalCount · read-only · current Interval count. | |||||||||||||||||||||
| CxfPMACMInterval15m256QAMStrong | 1.3.6.1.4.1.193.81.3.4.5.2.6.1.17 | PerfIntervalCount | RO | ||||||||||||||||||
column · PerfIntervalCount · read-only · current Interval count. | |||||||||||||||||||||
| CxfPMACMInterval15m256QAMStd | 1.3.6.1.4.1.193.81.3.4.5.2.6.1.18 | PerfIntervalCount | RO | ||||||||||||||||||
column · PerfIntervalCount · read-only · current Interval count. | |||||||||||||||||||||
| CxfPMACMInterval15m256QAMLight | 1.3.6.1.4.1.193.81.3.4.5.2.6.1.19 | PerfIntervalCount | RO | ||||||||||||||||||
column · PerfIntervalCount · read-only · current Interval count. | |||||||||||||||||||||
| CxfPMACMInterval15m512QAMStrong | 1.3.6.1.4.1.193.81.3.4.5.2.6.1.20 | PerfIntervalCount | RO | ||||||||||||||||||
column · PerfIntervalCount · read-only · current Interval count. | |||||||||||||||||||||
| CxfPMACMInterval15m512QAMStd | 1.3.6.1.4.1.193.81.3.4.5.2.6.1.21 | PerfIntervalCount | RO | ||||||||||||||||||
column · PerfIntervalCount · read-only · current Interval count. | |||||||||||||||||||||
| CxfPMACMInterval15m512QAMLight | 1.3.6.1.4.1.193.81.3.4.5.2.6.1.22 | PerfIntervalCount | RO | ||||||||||||||||||
column · PerfIntervalCount · read-only · current Interval count. | |||||||||||||||||||||
| CxfPMACMInterval15m1024QAMStrong | 1.3.6.1.4.1.193.81.3.4.5.2.6.1.23 | PerfIntervalCount | RO | ||||||||||||||||||
column · PerfIntervalCount · read-only · current Interval count. | |||||||||||||||||||||
| CxfPMACMInterval15m1024QAMStd | 1.3.6.1.4.1.193.81.3.4.5.2.6.1.24 | PerfIntervalCount | RO | ||||||||||||||||||
column · PerfIntervalCount · read-only · current Interval count. | |||||||||||||||||||||
| CxfPMACMInterval15m1024QAMLight | 1.3.6.1.4.1.193.81.3.4.5.2.6.1.25 | PerfIntervalCount | RO | ||||||||||||||||||
column · PerfIntervalCount · read-only · current Interval count. | |||||||||||||||||||||
| CxfPMACMInterval15m2048QAMStrong | 1.3.6.1.4.1.193.81.3.4.5.2.6.1.26 | PerfIntervalCount | RO | ||||||||||||||||||
column · PerfIntervalCount · read-only · current Interval count. | |||||||||||||||||||||
| CxfPMACMInterval15m2048QAMStd | 1.3.6.1.4.1.193.81.3.4.5.2.6.1.27 | PerfIntervalCount | RO | ||||||||||||||||||
column · PerfIntervalCount · read-only · current Interval count. | |||||||||||||||||||||
| CxfPMACMInterval15m2048QAMLight | 1.3.6.1.4.1.193.81.3.4.5.2.6.1.28 | PerfIntervalCount | RO | ||||||||||||||||||
column · PerfIntervalCount · read-only · current Interval count. | |||||||||||||||||||||
| CxfPMACMInterval15m4096QAMStrong | 1.3.6.1.4.1.193.81.3.4.5.2.6.1.29 | PerfIntervalCount | RO | ||||||||||||||||||
column · PerfIntervalCount · read-only · current Interval count. | |||||||||||||||||||||
| CxfPMACMInterval15m4096QAMStd | 1.3.6.1.4.1.193.81.3.4.5.2.6.1.30 | PerfIntervalCount | RO | ||||||||||||||||||
column · PerfIntervalCount · read-only · current Interval count. | |||||||||||||||||||||
| CxfPMACMInterval15m4096QAMLight | 1.3.6.1.4.1.193.81.3.4.5.2.6.1.31 | PerfIntervalCount | RO | ||||||||||||||||||
column · PerfIntervalCount · read-only · current Interval count. | |||||||||||||||||||||
| CxfPMACMInterval15mValidData | 1.3.6.1.4.1.193.81.3.4.5.2.6.1.32 | TruthValue | RO | ||||||||||||||||||
column · TruthValue · read-only · current This variable indicates whether the data for this interval is valid. | |||||||||||||||||||||
| CxfPMACMInterval15m8192QAMStrong | 1.3.6.1.4.1.193.81.3.4.5.2.6.1.33 | PerfIntervalCount | RO | ||||||||||||||||||
column · PerfIntervalCount · read-only · current Interval count. | |||||||||||||||||||||
| CxfPMACMInterval15m8192QAMStd | 1.3.6.1.4.1.193.81.3.4.5.2.6.1.34 | PerfIntervalCount | RO | ||||||||||||||||||
column · PerfIntervalCount · read-only · current Interval count. | |||||||||||||||||||||
| CxfPMACMInterval15m8192QAMLight | 1.3.6.1.4.1.193.81.3.4.5.2.6.1.35 | PerfIntervalCount | RO | ||||||||||||||||||
column · PerfIntervalCount · read-only · current Interval count. | |||||||||||||||||||||
| CxfPMACMInterval15m16384QAMStrong | 1.3.6.1.4.1.193.81.3.4.5.2.6.1.36 | PerfIntervalCount | RO | ||||||||||||||||||
column · PerfIntervalCount · read-only · current Interval count. | |||||||||||||||||||||
| CxfPMACMInterval15m16384QAMStd | 1.3.6.1.4.1.193.81.3.4.5.2.6.1.37 | PerfIntervalCount | RO | ||||||||||||||||||
column · PerfIntervalCount · read-only · current Interval count. | |||||||||||||||||||||
| CxfPMACMInterval15m16384QAMLight | 1.3.6.1.4.1.193.81.3.4.5.2.6.1.38 | PerfIntervalCount | RO | ||||||||||||||||||
column · PerfIntervalCount · read-only · current Interval count. | |||||||||||||||||||||
| TxfRLPMMimoCurrentTable | 1.3.6.1.4.1.193.81.3.4.5.2.7 | NA | |||||||||||||||||||
table · not-accessible · current Table for RLT MIMO Current performance data. | |||||||||||||||||||||
| RxfRLPMMimoCurrentEntry | 1.3.6.1.4.1.193.81.3.4.5.2.7.1 | NA | |||||||||||||||||||
| CxfPMPerfCurrentEta | 1.3.6.1.4.1.193.81.3.4.5.2.7.1.1 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Performance Monitoring for Current MIMO Eta Value. | |||||||||||||||||||||
| CxfPMPerfEtaMinLast7days | 1.3.6.1.4.1.193.81.3.4.5.2.7.1.2 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Indicate ETA Min level for the last 7 days. | |||||||||||||||||||||
| CxfPMPerfEtaMaxLast7days | 1.3.6.1.4.1.193.81.3.4.5.2.7.1.3 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Indicate ETA Max level for the last 7 days. | |||||||||||||||||||||
| TxfRLPMMimoCurrent24hTable | 1.3.6.1.4.1.193.81.3.4.5.2.8 | NA | |||||||||||||||||||
table · not-accessible · current Counters for Eta in current 24h. | |||||||||||||||||||||
| RxfRLPMMimoCurrent24hEntry | 1.3.6.1.4.1.193.81.3.4.5.2.8.1 | NA | |||||||||||||||||||
| CxfPMPerfCurrent24hElapsedTime | 1.3.6.1.4.1.193.81.3.4.5.2.8.1.1 | Counter32 | RO | ||||||||||||||||||
column · Counter32 · read-only · current The number of seconds that have elapsed since the beginning of the current error-measurement period. | |||||||||||||||||||||
| CxfPMPerfCurrent24hEtaMin | 1.3.6.1.4.1.193.81.3.4.5.2.8.1.2 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Performance Monitoring for MIMO Eta Min Value in Current 24h. | |||||||||||||||||||||
| CxfPMPerfCurrent24hEtaMax | 1.3.6.1.4.1.193.81.3.4.5.2.8.1.3 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Performance Monitoring for Current MIMO 24h Eta Max Value. | |||||||||||||||||||||
| TxfRLPMMimoInterval24hTable | 1.3.6.1.4.1.193.81.3.4.5.2.9 | NA | |||||||||||||||||||
table · not-accessible · current Performance Monitoring for MIMO Eta Min Value in Interval of 24h. | |||||||||||||||||||||
| RxfRLPMMimoInterval24hEntry | 1.3.6.1.4.1.193.81.3.4.5.2.9.1 | NA | |||||||||||||||||||
| CxfPMPerfInterval24hValidData | 1.3.6.1.4.1.193.81.3.4.5.2.9.1.1 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current This variable indicates whether the data for this interval is valid. | |||||||||||||||||||||
| CxfPMPerfInterval24hEtaMin | 1.3.6.1.4.1.193.81.3.4.5.2.9.1.2 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Performance Monitoring for MIMO Eta Min Value in Interval of 24h. | |||||||||||||||||||||
| CxfPMPerfInterval24hEtaMax | 1.3.6.1.4.1.193.81.3.4.5.2.9.1.3 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Performance Monitoring for MIMO Eta Max Value in Interval of 24h. | |||||||||||||||||||||
| TxfRLPMMimoCurrent15mTable | 1.3.6.1.4.1.193.81.3.4.5.2.10 | NA | |||||||||||||||||||
table · not-accessible · current Counters for Eta MIMO Current 15m table. | |||||||||||||||||||||
| RxfRLPMMimoCurrent15mEntry | 1.3.6.1.4.1.193.81.3.4.5.2.10.1 | NA | |||||||||||||||||||
| CxfPMPerfCurrent15mElapsedTime | 1.3.6.1.4.1.193.81.3.4.5.2.10.1.1 | Counter32 | RO | ||||||||||||||||||
column · Counter32 · read-only · current The number of seconds that have elapsed since the beginning of the current error-measurement period | |||||||||||||||||||||
| CxfPMPerfCurrent15mEtaMin | 1.3.6.1.4.1.193.81.3.4.5.2.10.1.2 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Performance Monitoring for MIMO Eta Min Value in Current 15m. | |||||||||||||||||||||
| CxfPMPerfCurrent15mEtaMax | 1.3.6.1.4.1.193.81.3.4.5.2.10.1.3 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Performance Monitoring for MIMO Eta Max Value in Current 15m. | |||||||||||||||||||||
| TxfRLPMMimoInterval15mTable | 1.3.6.1.4.1.193.81.3.4.5.2.11 | NA | |||||||||||||||||||
table · not-accessible · current Counters for Eta MIMO for Interval 15m. | |||||||||||||||||||||
| RxfRLPMMimoInterval15mEntry | 1.3.6.1.4.1.193.81.3.4.5.2.11.1 | NA | |||||||||||||||||||
| CxfPMPerfInterval15mIntervalNumber | 1.3.6.1.4.1.193.81.3.4.5.2.11.1.1 | INTEGER (1..96) | RO | ||||||||||||||||||
column · INTEGER (1..96) · read-only · current A number between 1 and 96, which identifies the interval for which the set of statistics is available. The interval identified by 1 is the most recently completed 15 minute interval, and the interval identified by N is the interval immediately preceding the one identified by N-1. | |||||||||||||||||||||
| CxfPMPerfInterval15mEtaMin | 1.3.6.1.4.1.193.81.3.4.5.2.11.1.2 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Performance Monitoring for MIMO Eta Min Value in Interval 15m. | |||||||||||||||||||||
| CxfPMPerfInterval15mEtaMax | 1.3.6.1.4.1.193.81.3.4.5.2.11.1.3 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Performance Monitoring for MIMO Eta Max Value in Interval 15m. | |||||||||||||||||||||
| CxfPMPerfInterval15mValidData | 1.3.6.1.4.1.193.81.3.4.5.2.11.1.4 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current This variable indicates whether the data for this interval is valid. | |||||||||||||||||||||
| NxfRadioLinkRltConformance | 1.3.6.1.4.1.193.81.3.4.5.3 | ||||||||||||||||||||
| NxfRadioLinkRltCompliances | 1.3.6.1.4.1.193.81.3.4.5.3.1 | ||||||||||||||||||||
| MxfRadioLinkRltFullCompliance | 1.3.6.1.4.1.193.81.3.4.5.3.1.1 | ||||||||||||||||||||
compliance · current The compliance statement for SNMP entities which implement everything.
| |||||||||||||||||||||
| NxfRadioLinkRltGroups | 1.3.6.1.4.1.193.81.3.4.5.3.2 | ||||||||||||||||||||
| GxfRadioLinkRltCompleteGroup | 1.3.6.1.4.1.193.81.3.4.5.3.2.1 | ||||||||||||||||||||
group · current A collection of all current objects in this MIB module
| |||||||||||||||||||||
Textual conventions
CarrierTermACMIndexINTEGERacm1024QAMLight(24)acm1024QAMStd(23)acm1024QAMStrong(22)acm128QAMLight(15)acm128QAMStd(14)acm128QAMStrong(13)acm16384QAMLight(36)acm16384QAMStd(35)acm16384QAMStrong(34)acm16QAMLight(6)acm16QAMStd(5)acm16QAMStrong(4)acm2048QAMLight(27)acm2048QAMStd(26)acm2048QAMStrong(25)acm256QAMLight(18)acm256QAMStd(17)acm256QAMStrong(16)acm32QAMLight(9)acm32QAMStd(8)acm32QAMStrong(7)acm4096QAMLight(30)acm4096QAMStd(29)acm4096QAMStrong(28)acm4QAMLight(3)acm4QAMStd(2)acm4QAMStrong(1)acm512QAMLight(21)acm512QAMStd(20)acm512QAMStrong(19)acm64QAMLight(12)acm64QAMStd(11)acm64QAMStrong(10)acm8192QAMLight(33)acm8192QAMStd(32)acm8192QAMStrong(31)This TC enumerates all possible ACM index values.