XF-RADIOLINK-PTP-TERMINAL-MIB
Ericsson ABThis MIB defines objects on terminal level for point-to-point Radiolink terminals.
snmptranslate -m XF-RADIOLINK-PTP-TERMINAL-MIB -Tpsnmpwalk -v2c -c <community> -m XF-RADIOLINK-PTP-TERMINAL-MIB <host> 1.3.6.1.4.1.193.81.3.4.1Imports
| ENTITY-MIB | entLogicalIndex, entPhysicalIndex |
|---|---|
| HC-PerfHist-TC-MIB | HCPerfCurrentCount |
| IF-MIB | ifIndex |
| PerfHist-TC-MIB | PerfCurrentCount, PerfIntervalCount |
| SNMP-FRAMEWORK-MIB | SnmpAdminString |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | Bits, Counter32, Counter64, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso |
| SNMPv2-TC | DisplayString, PhysAddress, TEXTUAL-CONVENTION, TruthValue |
| XF-TOP-MIB | xfRadioLink |
OID tree
| Name | OID | Type | Access | Status | Example | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| IxfRadioLinkPtpTerminalMIB | 1.3.6.1.4.1.193.81.3.4.1 | ||||||||||||||||
identity This MIB defines objects on terminal level for point-to-point Radiolink terminals. | |||||||||||||||||
| NxfRadioLinkPtpTerminalObjects | 1.3.6.1.4.1.193.81.3.4.1.1 | ||||||||||||||||
| TxfRLPtpTerminalTable | 1.3.6.1.4.1.193.81.3.4.1.1.1 | NA | |||||||||||||||
table · not-accessible · current Table for Radiolink point-to-point terminal managed objects. The table is indexed with entLogicalIndex. | |||||||||||||||||
| RxfRLPtpTerminalEntry | 1.3.6.1.4.1.193.81.3.4.1.1.1.1 | NA | |||||||||||||||
| CxfTermId | 1.3.6.1.4.1.193.81.3.4.1.1.1.1.1 | SnmpAdminString (SIZE (4)) | RW | ||||||||||||||
column · SnmpAdminString (SIZE (4)) · read-write · current Network identity for terminal. Same as GNM id. Note! Id TRMA, TRMB, SMMA, SMMB, AAAA and BBBB are not possible to set. Default = .TRMA. (also for Far End) Near end access: read-write Far end access: read-write (Traffic Node), read-only (other) | |||||||||||||||||
| CxfTermType | 1.3.6.1.4.1.193.81.3.4.1.1.1.1.2 | INTEGER | RO | ||||||||||||||
column · INTEGER · read-only · current Terminal type - other - Unknown - rlMLE - MLE classic - rlXfMLE - MMU2 - rlXfMLTN - MMU2B - rlXfMLStandalone(5) - MMU2 CS - rlXfMLTNPT(6) - Pt1
| |||||||||||||||||
| CxfTermProtection | 1.3.6.1.4.1.193.81.3.4.1.1.1.1.3 | INTEGER | RW | ||||||||||||||
column · INTEGER · read-write · current This object sets the protection mode of the terminal. - other - Unknown - unprotected - 1+0 - protectedHotStandby - 1+1 Hot - protectedWorkingStandby - 1+1 Working - UnProtectedSDC - 1+0 with Space Diversity - enhancedRLB - Enhanced Radio Link Bonding (1+1 PDH and 1+1/2+0 Ethernet) Default value: unprotected(2) Near end access: read-write Far end access: read-write (Traffic Node), read-only (other)
| |||||||||||||||||
| CxfTermCapacity | 1.3.6.1.4.1.193.81.3.4.1.1.1.1.4 | INTEGER | RW | ||||||||||||||
column · INTEGER · read-write · current This object sets the capacity on the terminal * other - Unknown * twoE1 - 2x2 Mbps * fourE1 - 4*2 Mbps (only rlMLE) * oneE2 - 8 Mbps * twoE2 - 2x8 Mbps * oneE3oneE1 - 34+2 Mbps * twoE3 - 2x34 Mbps * fourE3 - 4*34 Mbps * fourDS1 - 4xDS1 * eightDS1 - 8xDS1 * sixteenDS1 - 16*DS1 * seventeenDS1 - 16DS1+DS1 * oneStm0 - STM-0 * oneStm1oneE1 - STM-1+2 * thirtytwoDS1 - 32xDS1 * oneStm1oneDS1 - STM-1+DS1 * oneStm1oneE1at50MHz - STM-1+2 Mpbs @ 50 MHz * twentytwoE1 - 22xE1 * thirtyfiveE1 - 35xE1 * fortysixE1 - 46xE1 * seventyfiveE1 - 75xE1 * oneStm1OneJ1 - 1xSTM-1 + 1xJ1 * sixtynineDS1 - 69xDS1 * eightyDS1 - 80xDS1 * oneStm1OneE1LH - STM-1+2 for LH * oneStm1OneDS1LH - STM-1+DS1 for LH Default value PDH CQPSK ETSI: twoE1(2) MMU2, MMU2 B, MMU2 C Default value PDH CQPSK ANSI: fourDS1(9) MMU2 BA, MMU2 CA Default value PDH QAM ETSI: twentytwoE1(18) MMU2 D Default value PDH QAM ANSI: sixtynineDS1(23) MMU2 DA Default value SDH ETSI: oneStm1oneE1(14) MMU2 E, MMU2 F Default value SDH ANSI: oneStm1oneDS1(16) MMU2 E, MMU2 F Near end access: read-write Far end access: read-write (Traffic Node), read-only (MLE) Note that setting far end xfTermCapacity will remove far end traffic cross connects. oneStm1oneE1(14) and oneStm1oneE1at50MHz(17) has the same capacity and modulation but at different bandwidth, hence the two values. Capacities above 2xE1 for MMU2 B OFH, MMU2 C OFH, ATU and ATU B OFH are under license control.
| |||||||||||||||||
| CxfTermCapacityCapability | 1.3.6.1.4.1.193.81.3.4.1.1.1.1.5 | Bits | RO | ||||||||||||||
column · Bits · read-only · current This object shows the capacity capability on the terminal. Binary AND on contained modems units capabilities.
| |||||||||||||||||
| CxfTermModulation | 1.3.6.1.4.1.193.81.3.4.1.1.1.1.6 | TermModulation | RW | ||||||||||||||
column · TermModulation · read-write · current This object sets the modulation method on the terminal. Legal settable values are: - cqpsk(2) CQPSK - qam16(3) 16-QAM - qam128(4) 128-QAM - qam32(5) 32-QAM - qam64(6) 64-QAM Default value PDH CQPSK ETSI: cqpsk(2) MMU2, MMU2 B, MMU2 C Default value PDH CQPSK ANSI: cqpsk(2) MMU2 BA, MMU2 CA Default value PDH QAM ETSI: qam16(3) MMU2 D Default value PDH QAM ANSI: qam128(4) MMU2 DA Default value SDH ETSI: qam128(4) MMU2 E, MMU2 F Default value SDH ANSI: qam128(4) MMU2 E, MMU2 F Near end access: read-write Far end access: read-write (Traffic Node), read-only (other) Note that setting far end xfTermModulation might remove far end traffic connections. Modulation other than CQPSK for MMU2 C OFH are under license control. | |||||||||||||||||
| CxfTermModulationCapability | 1.3.6.1.4.1.193.81.3.4.1.1.1.1.7 | Bits | RO | ||||||||||||||
column · Bits · read-only · current This object shows the modulation capability on the terminal. Binary AND on contained modems and radio units capabilities.
| |||||||||||||||||
| CxfTermRestore | 1.3.6.1.4.1.193.81.3.4.1.1.1.1.8 | INTEGER | RW | ||||||||||||||
column · INTEGER · read-write · current rlXfMLTN: Restore command is clearing RF, IF and RxLoop, enable xfTermTrapEnable, turn transmitter on and set protection switch mode to Auto. In case of MMU2 E and MMU2 F it also clears the STM-1 Line Loop and Local Loop. Far end rlMLE and rlXfMLE: Restore command sets P-mark to off, all loops are set to off, all Test Port connections are removed, Transmitter is set to On and Switch Mode is set to Auto.
| |||||||||||||||||
| CxfTermAlarmSeverity | 1.3.6.1.4.1.193.81.3.4.1.1.1.1.9 | Bits | RO | ||||||||||||||
column · Bits · read-only · current This object shows the highest alarm severity for contained
units and interfaces in the terminal including E1, E2 and E3 interfaces.
Terminal alarm severity is indicated by 3 bits:
bits 012
000 clear
001 undetermined
010 warning
011 minor
100 major
101 critical
110 not defined
111 not applicable
| |||||||||||||||||
| CxfTermTrapEnable | 1.3.6.1.4.1.193.81.3.4.1.1.1.1.10 | INTEGER | RW | ||||||||||||||
column · INTEGER · read-write · current Disables/enables trap sending from this terminal. Note, terminals with termType = rlXfMLE will not include E1, E2 and E3 interfaces. Default value: enable(2)
| |||||||||||||||||
| CxfTermAsPort | 1.3.6.1.4.1.193.81.3.4.1.1.1.1.11 | INTEGER | RO | ||||||||||||||
column · INTEGER · read-only · current rlXfMLTN: Access server port used to reach far end terminals of type rlMLE or rlXfMLE,
else notAvailable (1).
rlXfMLE: Access server port used to reach a near end terminal of type rlXfMLE.
aspX002 - Port 3002/4002
.. - ..
aspX021 - Port 3021/4021
Note, Last available port differs between
different AMMs.
AMM 2p: aspX003
AMM 6p: aspX006
AMM 20p: aspX021
Near end access: read-only
Far end access: no access
| |||||||||||||||||
| CxfTermRemoteIdCheck | 1.3.6.1.4.1.193.81.3.4.1.1.1.1.12 | INTEGER | RW | ||||||||||||||
column · INTEGER · read-write · current This object sets if check of identity of remote terminal shall be performed or not. Legal values are: - enable(2): radio id check enabled - disable(3): radio id check disabled Default value: disable(3)
| |||||||||||||||||
| CxfTermRemoteId | 1.3.6.1.4.1.193.81.3.4.1.1.1.1.13 | SnmpAdminString (SIZE (4)) | RW | ||||||||||||||
column · SnmpAdminString (SIZE (4)) · read-write · current Network identity for remote terminal. Same as GNM id. Note: TRMA, TRMB, SMMA, SMMB, AAAA and BBBB are not possible to set. A change of the far end value might disconnect IP DCN, but internal GNM connection will not be disconnected. Default value: TRMB (initial) | |||||||||||||||||
| CxfTermPreset | 1.3.6.1.4.1.193.81.3.4.1.1.1.1.14 | INTEGER | RW | ||||||||||||||
column · INTEGER · read-write · current For terminals with termType = rlXfMLE or rlMLE: - Terminal is restored with factory settings. - Protected terminals will be set to unprotected. For terminals with termType = rlXfMLTN: - Terminal is restored with default configuration. Near end access: read-write Far end access: no access
| |||||||||||||||||
| CxfTermBerAlarmThreshold | 1.3.6.1.4.1.193.81.3.4.1.1.1.1.15 | INTEGER | RW | ||||||||||||||
column · INTEGER · read-write · current Threshold for BER alarm. Legal values: - ber1e3(2): BER=1e-3 (default) - ber1e4(3): BER=1e-4 - ber1e5(4): BER=1e-5 - ber1e6(5): BER=1e-6
| |||||||||||||||||
| CxfTermFadeNotificationTimer | 1.3.6.1.4.1.193.81.3.4.1.1.1.1.16 | Integer32 (0..1000) | RW | ||||||||||||||
column · Integer32 (0..1000) · read-write · current Notification suppression timer for protection alarms. Unit: 1 sec Value range: 0-1000 Default value: 200 Near end access: read-write Far end access: read-only (Traffic Node) | |||||||||||||||||
| CxfTermEquipmentProtectionIndex | 1.3.6.1.4.1.193.81.3.4.1.1.1.1.17 | Integer32 | RO | ||||||||||||||
column · Integer32 · read-only · current Unprotected: 0 Protected: EntPhysicalindex of MMU in lowest slot | |||||||||||||||||
| CxfTermSysName | 1.3.6.1.4.1.193.81.3.4.1.1.1.1.18 | DisplayString (SIZE (0..255)) | RO | ST308-GI116 | |||||||||||||
column · DisplayString (SIZE (0..255)) · read-only · current The system name of the TN hosting the terminal. Near end terminal: a zero-length string is returned as MIB-II/system/sysName should be used instead. Far end terminal: the system name is returned. Example values from LibreNMS test devices
| |||||||||||||||||
| CxfTermChannelMode | 1.3.6.1.4.1.193.81.3.4.1.1.1.1.19 | ChannelMode | RW | ||||||||||||||
column · ChannelMode · read-write · current Channel mode for the terminal (administrative status). This is only settable according to xfTermChannelModeCapability. Legal values are: - ccdp(2): Co-Channel Dual Polarization (XPIC) - accp(3): Adjacent Channels Co-Polarization (non-XPIC) - acap(4): Adjacent Channels Alternate Polarization (non-XPIC) Default value: acap(4) Near end access: read-write Far end access: read-write (Traffic Node only) | |||||||||||||||||
| CxfTermChannelModeCapability | 1.3.6.1.4.1.193.81.3.4.1.1.1.1.20 | Bits | RO | ||||||||||||||
column · Bits · read-only · current Channel mode capability. Legal values are: - ccdp(0) ........ Co-Channel Dual Polarization (XPIC) - accp(1) ........ Adjacent Channels Co-Polarization (non-XPIC) - acap(2) ........ Adjacent Channels Alternate Polarization (non-XPIC) - ccdp16QAM(3).... Co-Channel Dual Polarization (XPIC) for 16QAM only on MMU2 F - ccdp64QAM(4).... Co-Channel Dual Polarization (XPIC) for 64QAM only on MMU2 F - ccdp128QAM(5)... Co-Channel Dual Polarization (XPIC) for 128QAM only on MMU2 F Default value: acap(2) Near end access: read-write Far end access: read-write (Traffic Node only)
| |||||||||||||||||
| CxfTermTrafficAndDCN | 1.3.6.1.4.1.193.81.3.4.1.1.1.1.21 | INTEGER | RW | ||||||||||||||
column · INTEGER · read-write · current Enable or disable traffic. AIS is generated on all traffic interfaces when traffic is disabled, i.e. xfTermTrafficAndDCN = DCNOnly. The hop and DCN is working, though (primarily used for license handling). Default value: trafficAndDCN(1) Near end access: read-write Far end access: read-write (Traffic Node only)
| |||||||||||||||||
| CxfTermFrameFormat | 1.3.6.1.4.1.193.81.3.4.1.1.1.1.22 | INTEGER | RW | ||||||||||||||
column · INTEGER · read-write · current The frame format version used by the modem. Legal values are: - version0(2) only valid for MMU2 C modems - version1(3) only valid for MMU2 C modem. Default value: other(1) Near end access: read-write Far end access: read-write (Traffic Node only)
| |||||||||||||||||
| CxfTermFrameFormatCapability | 1.3.6.1.4.1.193.81.3.4.1.1.1.1.23 | Bits | RO | ||||||||||||||
column · Bits · read-only · current Frame format versions supported by the modem. Bit 0: modem MMU2 C supports frame format Version 0 Bit 1: modem MMU2 C supports frame format Version 1 (for QAM 2xE2, E3+E1 and 2xE3)
| |||||||||||||||||
| CxfTermDCNRadioConfiguration | 1.3.6.1.4.1.193.81.3.4.1.1.1.1.24 | INTEGER | RW | ||||||||||||||
column · INTEGER · read-write · current DCN radio capacity for terminal.
Legal values are:
- dcnRadio128kbps(2) RFCOH channel only: all RSOH bytes pass transparently over the hop
- dcnRadio320kbpsDCCr(3) 128 kbps + DCCr (default)
- dcnRadio320kbpsMSB (4) 128 kbps + MSB
Note: Future compatibility is guaranteed if the MSB [(2,2), (3,2), (3,3)]
are used when 320kbpsMSB value is selected.
Near end access: read-write
Far end access: read-write (Traffic Node only)
| |||||||||||||||||
| CxfTermDCNRadioCapability | 1.3.6.1.4.1.193.81.3.4.1.1.1.1.25 | Bits | RO | ||||||||||||||
column · Bits · read-only · current Binary AND on contained MMUs DCN radio configuration capability.
bits 210
000 undetermined
001 128kbps
010 320kbpsDCCr
100 320kbpsMSB
...
111 128kbps & 320kbpsDCCr & 320kbpsMSB
| |||||||||||||||||
| CxfTermDCNLineConfiguration | 1.3.6.1.4.1.193.81.3.4.1.1.1.1.26 | INTEGER | RW | ||||||||||||||
column · INTEGER · read-write · current DCN line capacity for terminal.
Legal values are:
transparent(2) All RSOH bytes pass transparently over the hop.
dcnLine192kbpsDCCr(3) (default) DCCr
dcnLine192kbpsMSB(4) MSB
Note: Future compatibility is guaranteed if the MSB [(2,2), (3,2), (3,3)]
are used when 192kbpsMSB value is selected.
Default value: dcnLine192kbpsDCCr(3)
Near end access: read-write
Far end access: read-write (Traffic Node only)
| |||||||||||||||||
| CxfTermDCNLineCapability | 1.3.6.1.4.1.193.81.3.4.1.1.1.1.27 | Bits | RO | ||||||||||||||
column · Bits · read-only · current Binary AND on contained MMUs DCN line configuration.
bits 210
000 undetermined
001 transparent
010 192kbpsDCCr
100 192kbpsMSB
...
111 transparent & 192kbpsDCCr & 192kbpsMSB
| |||||||||||||||||
| CxfTermFadeNotificationConfiguration | 1.3.6.1.4.1.193.81.3.4.1.1.1.1.28 | INTEGER | RW | ||||||||||||||
column · INTEGER · read-write · current This object enables or disables the notification suppress timer for Protection alarm. Default value: enabled(3), Near end access: read-write Far end access: read-write (Traffic Node only)
| |||||||||||||||||
| CxfTermLineProtection | 1.3.6.1.4.1.193.81.3.4.1.1.1.1.29 | INTEGER | RW | ||||||||||||||
column · INTEGER · read-write · current Administrative status of the line protection for a terminal physical line interface, e.g. MMU2 E and MMU2 F. Operational status is xfRLLineProtectionMode. Legal values are: other(1) (Not settable) unProtected(2) singleInterfaceLowSlot(3) SI low slot singleInterfaceHighSlot(4) SI high slot opticalSplitter(5) EEP equipmentAndLineProtection(6). ELP Default value: unProtected(2) Near end access: read-write Far end access: read-write (Traffic Node only)
| |||||||||||||||||
| TxfRLPtpTerminalOutputPowerTable | 1.3.6.1.4.1.193.81.3.4.1.1.2 | NA | |||||||||||||||
table · not-accessible · current Table for Radiolink point-to-points terminal output power managed objects. The tabled is indexed with entLogicalIndex. | |||||||||||||||||
| RxfRLPtpTerminalOutputPowerEntry | 1.3.6.1.4.1.193.81.3.4.1.1.2.1 | NA | |||||||||||||||
| CxfTermOutputPowerOperStatus | 1.3.6.1.4.1.193.81.3.4.1.1.2.1.1 | TermOutputPowerStatus | RO | ||||||||||||||
column · TermOutputPowerStatus · read-only · current This object shows the output power mode that is running. It is necessarily not equal to configured mode. | |||||||||||||||||
| CxfTermOutputPowerAdminStatus | 1.3.6.1.4.1.193.81.3.4.1.1.2.1.2 | TermOutputPowerStatus | RW | ||||||||||||||
column · TermOutputPowerStatus · read-write · current This object sets the output mode of the terminal. Legal values are: - other(1) - rtpc(2) - atpc(3) - localControl(4) - ra1LocalControlRa2Rtpc(5) - ra1RtpcRa2LocalControl(6) Note, It is only possible to select atpc if xfTermAtpcCapability = supportsAtpc for both near end and far end terminal. Value other(1) not settable. Default value: rtpc(2) | |||||||||||||||||
| CxfTermAtpcCapability | 1.3.6.1.4.1.193.81.3.4.1.1.2.1.3 | INTEGER | RO | ||||||||||||||
column · INTEGER · read-only · current This object shows the ATPC capability for the terminal, calculated as worst case capability for all units contained in the terminal.
| |||||||||||||||||
| TxfRLPtpTerminalPerformanceTable | 1.3.6.1.4.1.193.81.3.4.1.1.4 | NA | |||||||||||||||
table · not-accessible · current Table for performance data. For 1+0 systems performance data is calculated according to ITU-T Rec. G.826. For 1+1 systems - calculated as the combined performance of the protected terminal. 1+0 terminals uses ifindex for RAU IF 1+1 terminals uses ifindex for SWITCH IF | |||||||||||||||||
| RxfRLPtpTerminalPerformanceEntry | 1.3.6.1.4.1.193.81.3.4.1.1.4.1 | NA | |||||||||||||||
| CxfTermTimeElapsed | 1.3.6.1.4.1.193.81.3.4.1.1.4.1.1 | Counter32 | RO | 2499295 | |||||||||||||
column · Counter32 · read-only · current The number of seconds that have elapsed since the beginning of the current error-measurement period. If the current interval exceeds the maximum value, the agent will return the maximum value. Example values from LibreNMS test devices
| |||||||||||||||||
| CxfTermCurrentES | 1.3.6.1.4.1.193.81.3.4.1.1.4.1.2 | Counter32 | RO | 185 | |||||||||||||
column · Counter32 · read-only · current This object shows the error seconds. Example values from LibreNMS test devices
| |||||||||||||||||
| CxfTermCurrentSES | 1.3.6.1.4.1.193.81.3.4.1.1.4.1.3 | Counter32 | RO | 74 | |||||||||||||
column · Counter32 · read-only · current This object shows the severely error seconds. Example values from LibreNMS test devices
| |||||||||||||||||
| CxfTermCurrentBBE | 1.3.6.1.4.1.193.81.3.4.1.1.4.1.4 | Counter64 | RO | 2061 | |||||||||||||
column · Counter64 · read-only · current This object shows the background block errors. Example values from LibreNMS test devices
| |||||||||||||||||
| CxfTermCurrentUAS | 1.3.6.1.4.1.193.81.3.4.1.1.4.1.5 | Counter32 | RO | 0 | |||||||||||||
column · Counter32 · read-only · current This object shows the unavailable seconds (or unavailable time). Example values from LibreNMS test devices
| |||||||||||||||||
| CxfTermCurrentBB | 1.3.6.1.4.1.193.81.3.4.1.1.4.1.6 | Counter64 | RO | 832263570 | |||||||||||||
column · Counter64 · read-only · current This object shows the background blocks. Example values from LibreNMS test devices
| |||||||||||||||||
| CxfTermPerfReset | 1.3.6.1.4.1.193.81.3.4.1.1.4.1.7 | INTEGER | RW | ||||||||||||||
column · INTEGER · read-write · current This object is used to reset the performance counters. It is settable also when the radio unit isn't present. Near end access: read-write Far end access: read-write (Traffic Node only)
| |||||||||||||||||
| CxfTermTimeElapsedEnRLBExt | 1.3.6.1.4.1.193.81.3.4.1.1.4.1.8 | Counter32 | RO | ||||||||||||||
column · Counter32 · read-only · current The number of seconds that have elapsed in Enhanced RLB Extended capacity mode since RLB was enabled and the beginning of the current measurement period. | |||||||||||||||||
| TxfRLProtectionTable | 1.3.6.1.4.1.193.81.3.4.1.1.5 | NA | |||||||||||||||
table · not-accessible · current Table for control and supervision of the protection mechanism | |||||||||||||||||
| RxfRLProtectionEntry | 1.3.6.1.4.1.193.81.3.4.1.1.5.1 | NA | |||||||||||||||
| CxfRLProtectionMode | 1.3.6.1.4.1.193.81.3.4.1.1.5.1.1 | INTEGER | RO | ||||||||||||||
column · INTEGER · read-only · current This is the operational status of the protection mode. Default: unprotected(2)
| |||||||||||||||||
| CxfRLProtectionRau1 | 1.3.6.1.4.1.193.81.3.4.1.1.5.1.2 | Integer32 | RO | ||||||||||||||
column · Integer32 · read-only · current entPhysicalIndex for RAU 1. | |||||||||||||||||
| CxfRLProtectionRau2 | 1.3.6.1.4.1.193.81.3.4.1.1.5.1.3 | Integer32 | RO | ||||||||||||||
column · Integer32 · read-only · current entPhysicalIndex for RAU 2. | |||||||||||||||||
| CxfRLActiveTxRadio | 1.3.6.1.4.1.193.81.3.4.1.1.5.1.4 | INTEGER | RW | ||||||||||||||
column · INTEGER · read-write · current Active radio setting. Default value: txRadio1(1)
| |||||||||||||||||
| CxfRLSwitchOverReset | 1.3.6.1.4.1.193.81.3.4.1.1.5.1.5 | INTEGER | RW | ||||||||||||||
column · INTEGER · read-write · current Reset of the activated external alarms Tx Switch Over and Remote Tx Switch Over by resetting internal alarms.
| |||||||||||||||||
| CxfRLSwitchRevertiveTx | 1.3.6.1.4.1.193.81.3.4.1.1.5.1.6 | INTEGER | RW | ||||||||||||||
column · INTEGER · read-write · current Preferred Tx Radio. Default value: off(3) Near end access: read-write Far end access: read-only (Traffic Node only)
| |||||||||||||||||
| CxfRLProtectionCapability | 1.3.6.1.4.1.193.81.3.4.1.1.5.1.7 | Bits | RO | ||||||||||||||
column · Bits · read-only · current This object shows the protection capabilities of the traffic node. Near end access: read-only Far end access: read-only
| |||||||||||||||||
| CxfRLTxSwitchOverConfiguration | 1.3.6.1.4.1.193.81.3.4.1.1.5.1.8 | INTEGER | RW | ||||||||||||||
column · INTEGER · read-write · current Indicates whether the remote Tx switching function and Tx switchover alarm are enabled. When disabled, the remote Tx switching function is disabled and Tx switchover alarm is never raised and xfRLSwitchOverReset is never needed to reset these alarms. - Other (1) - Disabled (2) (default) - Enabled (3) Near end access: read-write Far end access: read-write
| |||||||||||||||||
| TxfRLLineProtectionTable | 1.3.6.1.4.1.193.81.3.4.1.1.6 | NA | |||||||||||||||
table · not-accessible · current Table for line protection status. | |||||||||||||||||
| RxfRLLineProtectionEntry | 1.3.6.1.4.1.193.81.3.4.1.1.6.1 | NA | |||||||||||||||
| CxfRLLineProtectionStatus | 1.3.6.1.4.1.193.81.3.4.1.1.6.1.1 | Bits | RO | ||||||||||||||
column · Bits · read-only · current Extension to xfLineProtectionStatus.
| |||||||||||||||||
| CxfRLLineProtectionMode | 1.3.6.1.4.1.193.81.3.4.1.1.6.1.2 | INTEGER | RO | ||||||||||||||
column · INTEGER · read-only · current Operational status of the line protection for a terminal physical line interface, e.g. MMU2 E and MMU2 F. Administrative status is xfTermLineProtection.
| |||||||||||||||||
| TxfRADIORSTable | 1.3.6.1.4.1.193.81.3.4.1.1.7 | NA | |||||||||||||||
table · not-accessible · current Traffic node extension of ifTable. The tabled is indexed with ifIndex. | |||||||||||||||||
| RxfRADIORSEntry | 1.3.6.1.4.1.193.81.3.4.1.1.7.1 | NA | |||||||||||||||
| CxfRADIORSAlarms | 1.3.6.1.4.1.193.81.3.4.1.1.7.1.1 | Bits | RO | ||||||||||||||
column · Bits · read-only · current This object shows rau rs related alarms.
| |||||||||||||||||
| TxfRADIORSPerformanceTable | 1.3.6.1.4.1.193.81.3.4.1.1.8 | NA | |||||||||||||||
table · not-accessible · current Traffic node extension of ifTable. The tabled is indexed with ifIndex. | |||||||||||||||||
| RxfRADIORSPerformanceEntry | 1.3.6.1.4.1.193.81.3.4.1.1.8.1 | NA | |||||||||||||||
| CxfRADIORSPerformanceAlarms | 1.3.6.1.4.1.193.81.3.4.1.1.8.1.1 | Bits | RO | ||||||||||||||
column · Bits · read-only · current This object shows RAU RS related alarms.
| |||||||||||||||||
| TxfRLPMConfigTable | 1.3.6.1.4.1.193.81.3.4.1.1.9 | NA | |||||||||||||||
table · not-accessible · current This table contains the alarm threshold values for RL PM | |||||||||||||||||
| RxfRLPMConfigEntry | 1.3.6.1.4.1.193.81.3.4.1.1.9.1 | NA | |||||||||||||||
| CxfPMSetThreshold15mESs | 1.3.6.1.4.1.193.81.3.4.1.1.9.1.1 | Integer32 | RW | ||||||||||||||
column · Integer32 · read-write · current The 15 minute set threshold for ES. Default value is 180. Near end access: read-write Far end access: No access | |||||||||||||||||
| CxfPMSetThreshold15mSESs | 1.3.6.1.4.1.193.81.3.4.1.1.9.1.2 | Integer32 | RW | ||||||||||||||
column · Integer32 · read-write · current The 15 minute set threshold for SES. Default value is 15. Near end access: read-write Far end access: No access | |||||||||||||||||
| CxfPMSetThreshold15mBBEs | 1.3.6.1.4.1.193.81.3.4.1.1.9.1.3 | Integer32 | RW | ||||||||||||||
column · Integer32 · read-write · current The 15 minute set threshold for BBE. Default value is 9900. Near end access: read-write Far end access: No access | |||||||||||||||||
| CxfPMResetThreshold15mESs | 1.3.6.1.4.1.193.81.3.4.1.1.9.1.4 | Integer32 | RW | ||||||||||||||
column · Integer32 · read-write · current The 15 minute reset threshold for ES. Default value is 20. Near end access: read-write Far end access: No access | |||||||||||||||||
| CxfPMResetThreshold15mSESs | 1.3.6.1.4.1.193.81.3.4.1.1.9.1.5 | Integer32 | RW | ||||||||||||||
column · Integer32 · read-write · current The 15 minute reset threshold for SES. Default value is 1. Near end access: read-write Far end access: No access | |||||||||||||||||
| CxfPMResetThreshold15mBBEs | 1.3.6.1.4.1.193.81.3.4.1.1.9.1.6 | Integer32 | RW | ||||||||||||||
column · Integer32 · read-write · current The 15 minute reset threshold for BBE. Default value is 200. Near end access: read-write Far end access: No access | |||||||||||||||||
| CxfPMSetThreshold24hESs | 1.3.6.1.4.1.193.81.3.4.1.1.9.1.7 | Integer32 | RW | ||||||||||||||
column · Integer32 · read-write · current The 24 hours set threshold for ES. Default value is 1500. Near end access: read-write Far end access: No access | |||||||||||||||||
| CxfPMSetThreshold24hSESs | 1.3.6.1.4.1.193.81.3.4.1.1.9.1.8 | Integer32 | RW | ||||||||||||||
column · Integer32 · read-write · current The 24 hours set threshold for SES. Default value is 20. Near end access: read-write Far end access: No access | |||||||||||||||||
| CxfPMSetThreshold24hBBEs | 1.3.6.1.4.1.193.81.3.4.1.1.9.1.9 | Integer32 | RW | ||||||||||||||
column · Integer32 · read-write · current The 24 hours set threshold for BBE. Default value is 48000. Near end access: read-write Far end access: No access | |||||||||||||||||
| CxfPMView | 1.3.6.1.4.1.193.81.3.4.1.1.9.1.10 | INTEGER | RW | ||||||||||||||
column · INTEGER · read-write · current Enable/disable visibility of PM tables. Default value: pmEnable(1) Near end access: read-write Far end access: No access
| |||||||||||||||||
| CxfPMStatus | 1.3.6.1.4.1.193.81.3.4.1.1.9.1.11 | Bits | RO | ||||||||||||||
column · Bits · read-only · current Threshold alarm status. Values from rlts1Counter15m0(21) to tltmCounter24h2(50) are related to obsoleted MOs.
| |||||||||||||||||
| CxfPMRLTS1Threshold | 1.3.6.1.4.1.193.81.3.4.1.1.9.1.12 | Integer32 (-999..-201) | RW | ||||||||||||||
column · Integer32 (-999..-201) · read-write · current RLTS1 Alarm Threshold for Minimum RF Input Power. RF input level = value/10 dBm. Domain: [-99.9 ... -20.1 dBm] Valid for both 15 m & 24 h intervals. If changed current interval PM data must be reset. Always less than RLTS2, xfPMRLTS2Threshold. | |||||||||||||||||
| CxfPMSetThreshold15mRLTS1 | 1.3.6.1.4.1.193.81.3.4.1.1.9.1.13 | Integer32 (1..900) | RW | ||||||||||||||
column · Integer32 (1..900) · read-write · current Received Level 1 Threshold Second (RLTS1) 15 minute. Alarm Set threshold in number of seconds that RF Input Power are allowed below the RLTS1 Alarm Threshold for Minimum RF Input Power in current 15 minute interval. Always greater than alarm Reset, xfPMResetThreshold15mRLTS1. | |||||||||||||||||
| CxfPMResetThreshold15mRLTS1 | 1.3.6.1.4.1.193.81.3.4.1.1.9.1.14 | Integer32 (1..900) | RW | ||||||||||||||
column · Integer32 (1..900) · read-write · current Received Level 1 Threshold Second (RLTS1) 15 minute. Alarm Reset threshold in number of seconds that RF Input Power are allowed below the RLTS1 Alarm Threshold for Minimum RF Input Power for entire current 15 minute interval. Always less than alarm Set, xfPMSetThreshold15mRLTS1. | |||||||||||||||||
| CxfPMRLTS2Threshold | 1.3.6.1.4.1.193.81.3.4.1.1.9.1.15 | Integer32 (-998..-200) | RW | ||||||||||||||
column · Integer32 (-998..-200) · read-write · current RLTS2 Alarm Threshold for Minimum RF Input Power. RF input level = value/10 dBm. Domain: [-99.8 ... -20.0 dBm] Valid for both 15 m & 24 h intervals. If changed current interval PM data must be reset. Always greater than RLTS1, xfPMRLTS1Threshold. | |||||||||||||||||
| CxfPMSetThreshold15mRLTS2 | 1.3.6.1.4.1.193.81.3.4.1.1.9.1.16 | Integer32 (1..900) | RW | ||||||||||||||
column · Integer32 (1..900) · read-write · current Received Level 2 Threshold Second (RLTS2) 15 minute. Alarm Set threshold in number of seconds that RF Input Power are allowed below the RLTS2 Alarm Threshold for Minimum RF Input Power in current 15 minute interval. Always greater or equal to alarm Reset, xfPMResetThreshold15mRLTS2. | |||||||||||||||||
| CxfPMResetThreshold15mRLTS2 | 1.3.6.1.4.1.193.81.3.4.1.1.9.1.17 | Integer32 (1..900) | RW | ||||||||||||||
column · Integer32 (1..900) · read-write · current Received Level 2 Threshold Second (RLTS2) 15 minute. Alarm Reset threshold in number of seconds that RF Input Power are allowed below the RLTS2 Alarm Threshold for Minimum RF Input Power for entire current 15 minute interval. Always less or equal to alarm Set, xfPMSetThreshold15mRLTS2. | |||||||||||||||||
| CxfPMSetThreshold15mRLTM | 1.3.6.1.4.1.193.81.3.4.1.1.9.1.18 | Integer32 (10..800) | RW | ||||||||||||||
column · Integer32 (10..800) · read-write · current Receive Level Tide Mark (RLTM) 15 minute. Alarm Set threshold for maximum allowed max / min difference of RF Input Power in current 15 minute interval. RF input level = value/10 dB. Domain: [1.0 ... 80.0 dB] Always greater or equal to alarm Reset, xfPMResetThreshold15mRLTM. | |||||||||||||||||
| CxfPMResetThreshold15mRLTM | 1.3.6.1.4.1.193.81.3.4.1.1.9.1.19 | Integer32 (10..800) | RW | ||||||||||||||
column · Integer32 (10..800) · read-write · current Receive Level Tide Mark (RLTM) 15 minute. Alarm Reset threshold for maximum allowed max / min difference of RF Input Power for entire current 15 minute interval. RF input level = value/10 dB. Domain: [1.0 ... 80.0 dB] Always less or equal to alarm Set, xfPMSetThreshold15mRLTM. | |||||||||||||||||
| CxfPMTLTS1Threshold | 1.3.6.1.4.1.193.81.3.4.1.1.9.1.20 | Integer32 (-100..45) | RW | ||||||||||||||
column · Integer32 (-100..45) · read-write · current TLTS1 Alarm Threshold for Maximum RF Output Power. RF output level = value dBm. Domain: [-100 ... 45 dBm] Valid for both 15 m & 24 h intervals. If changed current interval PM data must be reset. | |||||||||||||||||
| CxfPMSetThreshold15mTLTS1 | 1.3.6.1.4.1.193.81.3.4.1.1.9.1.21 | Integer32 (1..900) | RW | ||||||||||||||
column · Integer32 (1..900) · read-write · current Transmitted Levels 1 Threshold Second (TLTS1) 15 minute. Alarm Set threshold in number of seconds that RF Output Power are allowed above the TLTS1 Alarm Threshold for Maximum RF Output Power in current 15 minute interval. Always greater or equal to alarm Reset, xfPMResetThreshold15mTLTS1. | |||||||||||||||||
| CxfPMResetThreshold15mTLTS1 | 1.3.6.1.4.1.193.81.3.4.1.1.9.1.22 | Integer32 (1..900) | RW | ||||||||||||||
column · Integer32 (1..900) · read-write · current Transmitted Levels 1 Threshold Second (TLTS1) 15 minute. Alarm Reset threshold in number of seconds that RF Output Power are allowed above the TLTS1 Alarm Threshold for Maximum RF Output Power for entire current 15 minute interval. Always less or equal to alarm Set, xfPMSetThreshold15mTLTS1. | |||||||||||||||||
| CxfPMSetThreshold15mTLTM | 1.3.6.1.4.1.193.81.3.4.1.1.9.1.23 | Integer32 (1..145) | RW | ||||||||||||||
column · Integer32 (1..145) · read-write · current Transmitted Level Tide Mark (TLTM) 15 minute. Alarm Set threshold for maximum allowed max / min difference of RF Output Power in current 15 minute interval. RF output level = value dB. Domain: [1 ... 145 dB] Always greater or equal to alarm Reset, xfPMResetThreshold15mTLTM. | |||||||||||||||||
| CxfPMResetThreshold15mTLTM | 1.3.6.1.4.1.193.81.3.4.1.1.9.1.24 | Integer32 (1..145) | RW | ||||||||||||||
column · Integer32 (1..145) · read-write · current Transmitted Level Tide Mark (TLTM) 15 minute. Alarm Reset threshold for maximum allowed max / min difference of RF Output Power for entire current 15 minute interval. RF output level = value dB. Domain: [1 ... 145 dB] Always less or equal to alarm Set, xfPMSetThreshold15mTLTM. | |||||||||||||||||
| CxfPMSetThreshold24hRLTS1 | 1.3.6.1.4.1.193.81.3.4.1.1.9.1.25 | Integer32 (1..86400) | RW | ||||||||||||||
column · Integer32 (1..86400) · read-write · current Received Level 1 Threshold Second (RLTS1) 24 hour. Alarm Set / Reset threshold in number of seconds that RF Input Power are allowed below the RLTS1 Alarm Threshold for Minimum RF Input Power in current 24 hour interval. | |||||||||||||||||
| CxfPMSetThreshold24hRLTS2 | 1.3.6.1.4.1.193.81.3.4.1.1.9.1.26 | Integer32 (1..86400) | RW | ||||||||||||||
column · Integer32 (1..86400) · read-write · current Received Level 2 Threshold Second (RLTS2) 24 hour. Alarm Set / Reset threshold in number of seconds that RF Input Power are allowed below the RLTS2 Alarm Threshold for Minimum RF Input Power in current 24 hour interval. | |||||||||||||||||
| CxfPMSetThreshold24hRLTM | 1.3.6.1.4.1.193.81.3.4.1.1.9.1.27 | Integer32 (10..800) | RW | ||||||||||||||
column · Integer32 (10..800) · read-write · current Receive Level Tide Mark (RLTM) 24 hour. Alarm Set / Reset threshold for maximum allowed max / min difference of RF Input Power in current 24 hour interval. RF input level = value/10 dB. Domain: [1.0 ... 80.0 dB] | |||||||||||||||||
| CxfPMSetThreshold24hTLTS1 | 1.3.6.1.4.1.193.81.3.4.1.1.9.1.28 | Integer32 (1..86400) | RW | ||||||||||||||
column · Integer32 (1..86400) · read-write · current Transmitted Levels 1 Threshold Second (TLTS1) 24 hour. Alarm Set / Reset threshold in number of seconds that RF Output Power are allowed above the TLTS1 Alarm Threshold for Maximum RF Output Power in current 24 hour interval. | |||||||||||||||||
| CxfPMSetThreshold24hTLTM | 1.3.6.1.4.1.193.81.3.4.1.1.9.1.29 | Integer32 (1..145) | RW | ||||||||||||||
column · Integer32 (1..145) · read-write · current Transmitted Level Tide Mark (TLTM) 24 hour. Alarm Set / Reset threshold for maximum allowed max / min difference of RF Output Power in current 24 hour interval. RF output level = value dB. Domain: [1 ... 145 dB] | |||||||||||||||||
| TxfRLPMCurrent24hTable | 1.3.6.1.4.1.193.81.3.4.1.1.10 | NA | |||||||||||||||
table · not-accessible · current TBD | |||||||||||||||||
| RxfRLPMCurrent24hEntry | 1.3.6.1.4.1.193.81.3.4.1.1.10.1 | NA | |||||||||||||||
| CxfPMCurrent24hTimeElapsed | 1.3.6.1.4.1.193.81.3.4.1.1.10.1.1 | Counter32 | RO | ||||||||||||||
column · Counter32 · read-only · current The number of seconds that have elapsed since the beginning of the current error-measurement period. If the current interval exceeds the maximum value, the agent will return the maximum value. | |||||||||||||||||
| CxfPMCurrent24hESs | 1.3.6.1.4.1.193.81.3.4.1.1.10.1.2 | PerfCurrentCount | RO | ||||||||||||||
column · PerfCurrentCount · read-only · current Errored Seconds in the current 24-hour interval. | |||||||||||||||||
| CxfPMCurrent24hSESs | 1.3.6.1.4.1.193.81.3.4.1.1.10.1.3 | PerfCurrentCount | RO | ||||||||||||||
column · PerfCurrentCount · read-only · current Severely Errored Seconds in the current 24-hour interval. | |||||||||||||||||
| CxfPMCurrent24hBBEs | 1.3.6.1.4.1.193.81.3.4.1.1.10.1.4 | HCPerfCurrentCount | RO | ||||||||||||||
column · HCPerfCurrentCount · read-only · current Background Block Errors in the current 24 hour interval | |||||||||||||||||
| CxfPMCurrent24hUASs | 1.3.6.1.4.1.193.81.3.4.1.1.10.1.5 | PerfCurrentCount | RO | ||||||||||||||
column · PerfCurrentCount · read-only · current Unavailable seconds (or Unavailable Time) in the current 24 hour interval. | |||||||||||||||||
| CxfPMCurrent24hBBs | 1.3.6.1.4.1.193.81.3.4.1.1.10.1.6 | HCPerfCurrentCount | RO | ||||||||||||||
column · HCPerfCurrentCount · read-only · current The number of Background Blocks in the current 24 hour interval. | |||||||||||||||||
| CxfPMCurrent24hRLTS1 | 1.3.6.1.4.1.193.81.3.4.1.1.10.1.7 | Integer32 (0..86400 | -1) | RO | ||||||||||||||
column · Integer32 (0..86400 | -1) · read-only · current Received Level 1 Threshold Second (RLTS1) 24 hour. Number of seconds that the RF Input Power was below the RLTS1 in the current 24 hour interval. -1 indicates invalid value. Reset by xfTermPerfReset. | |||||||||||||||||
| CxfPMCurrent24hRLTS2 | 1.3.6.1.4.1.193.81.3.4.1.1.10.1.8 | Integer32 (0..86400 | -1) | RO | ||||||||||||||
column · Integer32 (0..86400 | -1) · read-only · current Received Level 2 Threshold Second (RLTS2) 24 hour. Number of seconds that the RF Input Power was below the RLTS2 in the current 24 hour interval. -1 indicates invalid value. Reset by xfTermPerfReset. | |||||||||||||||||
| CxfPMCurrent24hRLMin | 1.3.6.1.4.1.193.81.3.4.1.1.10.1.9 | Integer32 (-999..-200 | 0) | RO | ||||||||||||||
column · Integer32 (-999..-200 | 0) · read-only · current Indicate Min RF Input level in current 24 hour interval. RF input level = value/10 dBm. Domain: [-99.9 ... -20.0 dBm] 0 (zero) indicates invalid value. Reset by xfTermPerfReset. | |||||||||||||||||
| CxfPMCurrent24hRLMax | 1.3.6.1.4.1.193.81.3.4.1.1.10.1.10 | Integer32 (-999..-200 | 0) | RO | ||||||||||||||
column · Integer32 (-999..-200 | 0) · read-only · current Indicate Max RF Input level in current 24 hour interval. RF input level = value/10 dBm. Domain: [-99.9 ... -20.0 dBm] 0 (zero) indicates invalid value. Reset by xfTermPerfReset. | |||||||||||||||||
| CxfPMCurrent24hTLTS1 | 1.3.6.1.4.1.193.81.3.4.1.1.10.1.11 | Integer32 (0..86400 | -1) | RO | ||||||||||||||
column · Integer32 (0..86400 | -1) · read-only · current Transmitted Level 1 Threshold Second (TLTS1) 24 hour. Number of seconds that the RF Output Power was above the TLTS1 in the current 24 hour interval -1 indicates invalid value. Reset by xfTermPerfReset. | |||||||||||||||||
| CxfPMCurrent24hTLMin | 1.3.6.1.4.1.193.81.3.4.1.1.10.1.12 | Integer32 (-100..45 | 255) | RO | ||||||||||||||
column · Integer32 (-100..45 | 255) · read-only · current Indicate Min RF Output level in current 24 hour interval. RF output level = value dBm. Domain: [-100 ... 45 dBm] 255 indicates invalid value. Reset by xfTermPerfReset. | |||||||||||||||||
| CxfPMCurrent24hTLMax | 1.3.6.1.4.1.193.81.3.4.1.1.10.1.13 | Integer32 (-100..45 | 255) | RO | ||||||||||||||
column · Integer32 (-100..45 | 255) · read-only · current Indicate Max RF Output level in current 24 hour interval. RF output level = value dBm. Domain: [-100 ... 45 dBm] 255 indicates invalid value. Reset by xfTermPerfReset. | |||||||||||||||||
| CxfPMCurrent24hMSEMin | 1.3.6.1.4.1.193.81.3.4.1.1.10.1.14 | Integer32 (-1000..1000 | 2000) | RO | ||||||||||||||
column · Integer32 (-1000..1000 | 2000) · read-only · current Indicate Min MSE level in current 24 hour interval. Input level = value/10 dB. Domain: [-100.0 ... 100.0 dB] 2000 indicates invalid value. Reset by xfTermPerfReset. | |||||||||||||||||
| CxfPMCurrent24hMSEMax | 1.3.6.1.4.1.193.81.3.4.1.1.10.1.15 | Integer32 (-1000..1000 | 2000) | RO | ||||||||||||||
column · Integer32 (-1000..1000 | 2000) · read-only · current Indicate Max MSE level in current 24 hour interval. Input level = value/10 dB. Domain: [-100.0 ... 100.0 dB] 2000 indicates invalid value. Reset by xfTermPerfReset. | |||||||||||||||||
| CxfPMCurrent24hXPIMin | 1.3.6.1.4.1.193.81.3.4.1.1.10.1.16 | Integer32 (-1000..1000 | 2000) | RO | ||||||||||||||
column · Integer32 (-1000..1000 | 2000) · read-only · current Indicate Min Cross-Polar Interference (XPI) level in current 24 hour interval. Input level = value/10 dB. Domain: [-100.0 ... 100.0 dB] 2000 indicates invalid value. Reset by xfTermPerfReset. | |||||||||||||||||
| CxfPMCurrent24hXPIMax | 1.3.6.1.4.1.193.81.3.4.1.1.10.1.17 | Integer32 (-1000..1000 | 2000) | RO | ||||||||||||||
column · Integer32 (-1000..1000 | 2000) · read-only · current Indicate Max Cross-Polar Interference (XPI) level in current 24 hour interval. Input level = value/10 dB. Domain: [-100.0 ... 100.0 dB] 2000 indicates invalid value. Reset by xfTermPerfReset. | |||||||||||||||||
| CxfPMCurrent24hESR | 1.3.6.1.4.1.193.81.3.4.1.1.10.1.18 | PerfCurrentCount | RO | ||||||||||||||
column · PerfCurrentCount · read-only · current Error Seconds Ratio in the current 24-hour interval | |||||||||||||||||
| CxfPMCurrent24hSESR | 1.3.6.1.4.1.193.81.3.4.1.1.10.1.19 | PerfCurrentCount | RO | ||||||||||||||
column · PerfCurrentCount · read-only · current Severely Error Seconds Ratio in the current 24-hour interval | |||||||||||||||||
| CxfPMCurrent24hBBER | 1.3.6.1.4.1.193.81.3.4.1.1.10.1.20 | HCPerfCurrentCount | RO | ||||||||||||||
column · HCPerfCurrentCount · read-only · current Background Block Errors Ratio in the current 24-hour interval | |||||||||||||||||
| TxfRLPMInterval24hTable | 1.3.6.1.4.1.193.81.3.4.1.1.11 | NA | |||||||||||||||
table · not-accessible · current TBD | |||||||||||||||||
| RxfRLPMInterval24hEntry | 1.3.6.1.4.1.193.81.3.4.1.1.11.1 | NA | |||||||||||||||
| CxfPMInterval24hESs | 1.3.6.1.4.1.193.81.3.4.1.1.11.1.1 | PerfIntervalCount | RO | ||||||||||||||
column · PerfIntervalCount · read-only · current The counter associated with the number of Errored Seconds encountered by a SONET/SDH Section in the previous 24-hour interval. | |||||||||||||||||
| CxfPMInterval24hSESs | 1.3.6.1.4.1.193.81.3.4.1.1.11.1.2 | PerfIntervalCount | RO | ||||||||||||||
column · PerfIntervalCount · read-only · current The counter associated with the number of Severely Errored Seconds encountered by a SONET/SDH Section in the previous 24-hour interval. | |||||||||||||||||
| CxfPMInterval24hBBEs | 1.3.6.1.4.1.193.81.3.4.1.1.11.1.3 | HCPerfCurrentCount | RO | ||||||||||||||
column · HCPerfCurrentCount · read-only · current The counter associated with the number of Coding Violations (Errored Blocks) encountered by a SONET/SDH Section in the previous 24-hour interval. | |||||||||||||||||
| CxfPMInterval24hUASs | 1.3.6.1.4.1.193.81.3.4.1.1.11.1.4 | PerfIntervalCount | RO | ||||||||||||||
column · PerfIntervalCount · read-only · current The number of UnAvailable Seconds encountered by a SONET/SDH Section in the previous 24 hour interval. | |||||||||||||||||
| CxfPMInterval24hBBs | 1.3.6.1.4.1.193.81.3.4.1.1.11.1.5 | HCPerfCurrentCount | RO | ||||||||||||||
column · HCPerfCurrentCount · read-only · current The number of Background Blocks in a SONET/SDH Section in the previous 24 hour interval. | |||||||||||||||||
| CxfPMInterval24hValidData | 1.3.6.1.4.1.193.81.3.4.1.1.11.1.6 | TruthValue | RO | ||||||||||||||
column · TruthValue · read-only · current This variable indicates whether the data for this interval is valid. | |||||||||||||||||
| CxfPMInterval24hRLTS1 | 1.3.6.1.4.1.193.81.3.4.1.1.11.1.7 | Integer32 (0..86400 | -1) | RO | ||||||||||||||
column · Integer32 (0..86400 | -1) · read-only · current Received Level 1 Threshold Second (RLTS1) 24 hour. Number of seconds that the RF Input Power was below the RLTS1 in the previous 24 hour interval. -1 indicates invalid value. Reset by xfTermPerfReset. | |||||||||||||||||
| CxfPMInterval24hRLTS2 | 1.3.6.1.4.1.193.81.3.4.1.1.11.1.8 | Integer32 (0..86400 | -1) | RO | ||||||||||||||
column · Integer32 (0..86400 | -1) · read-only · current Received Level 2 Threshold Second (RLTS2) 24 hour. Number of seconds that the RF Input Power was below the RLTS2 in the previous 24 hour interval. -1 indicates invalid value. Reset by xfTermPerfReset. | |||||||||||||||||
| CxfPMInterval24hRLMin | 1.3.6.1.4.1.193.81.3.4.1.1.11.1.9 | Integer32 (-999..-200 | 0) | RO | ||||||||||||||
column · Integer32 (-999..-200 | 0) · read-only · current Indicate Min RF Input level in previous 24 hour interval. RF input level = value/10 dBm. Domain: [-99.9 ... -20.0 dBm] 0 (zero) indicates invalid value. Reset by xfTermPerfReset. | |||||||||||||||||
| CxfPMInterval24hRLMax | 1.3.6.1.4.1.193.81.3.4.1.1.11.1.10 | Integer32 (-999..-200 | 0) | RO | ||||||||||||||
column · Integer32 (-999..-200 | 0) · read-only · current Indicate Max RF Input level in previous 24 hour interval. RF input level = value/10 dBm. Domain: [-99.9 ... -20.0 dBm] 0 (zero) indicates invalid value. Reset by xfTermPerfReset. | |||||||||||||||||
| CxfPMInterval24hTLTS1 | 1.3.6.1.4.1.193.81.3.4.1.1.11.1.11 | Integer32 (0..86400 | -1) | RO | ||||||||||||||
column · Integer32 (0..86400 | -1) · read-only · current Transmitted Level 1 Threshold Second (TLTS1) 24 hour. Number of seconds that the RF Output Power was above the TLTS1 in the previous 24 hour interval -1 indicates invalid value. Reset by xfTermPerfReset. | |||||||||||||||||
| CxfPMInterval24hTLMin | 1.3.6.1.4.1.193.81.3.4.1.1.11.1.12 | Integer32 (-100..45 | 255) | RO | ||||||||||||||
column · Integer32 (-100..45 | 255) · read-only · current Indicate Min RF Output level in previous 24 hour interval. RF output level = value dBm. Domain: [-100 ... 45 dBm] 255 indicates invalid value. Reset by xfTermPerfReset. | |||||||||||||||||
| CxfPMInterval24hTLMax | 1.3.6.1.4.1.193.81.3.4.1.1.11.1.13 | Integer32 (-100..45 | 255) | RO | ||||||||||||||
column · Integer32 (-100..45 | 255) · read-only · current Indicate Max RF Output level in previous 24 hour interval. RF output level = value dBm. Domain: [-100 ... 45 dBm] 255 indicates invalid value. Reset by xfTermPerfReset. | |||||||||||||||||
| CxfPMInterval24hMSEMin | 1.3.6.1.4.1.193.81.3.4.1.1.11.1.14 | Integer32 (-1000..1000 | 2000) | RO | ||||||||||||||
column · Integer32 (-1000..1000 | 2000) · read-only · current Indicate Min MSE level in previous 24 hour interval. Input level = value/10 dB. Domain: [-100.0 ... 100.0 dB] 2000 indicates invalid value. Reset by xfTermPerfReset. | |||||||||||||||||
| CxfPMInterval24hMSEMax | 1.3.6.1.4.1.193.81.3.4.1.1.11.1.15 | Integer32 (-1000..1000 | 2000) | RO | ||||||||||||||
column · Integer32 (-1000..1000 | 2000) · read-only · current Indicate Max MSE level in previous 24 hour interval. Input level = value/10 dB. Domain: [-100.0 ... 100.0 dB] 2000 indicates invalid value. Reset by xfTermPerfReset. | |||||||||||||||||
| CxfPMInterval24hXPIMin | 1.3.6.1.4.1.193.81.3.4.1.1.11.1.16 | Integer32 (-1000..1000 | 2000) | RO | ||||||||||||||
column · Integer32 (-1000..1000 | 2000) · read-only · current Indicate Min Cross-Polar Interference (XPI) level in previous 24 hour interval. Input level = value/10 dB. Domain: [-100.0 ... 100.0 dB] 2000 indicates invalid value. Reset by xfTermPerfReset. | |||||||||||||||||
| CxfPMInterval24hXPIMax | 1.3.6.1.4.1.193.81.3.4.1.1.11.1.17 | Integer32 (-1000..1000 | 2000) | RO | ||||||||||||||
column · Integer32 (-1000..1000 | 2000) · read-only · current Indicate Max Cross-Polar Interference (XPI) level in previous 24 hour interval. Input level = value/10 dB. Domain: [-100.0 ... 100.0 dB] 2000 indicates invalid value. Reset by xfTermPerfReset. | |||||||||||||||||
| TxfRLPMCurrent15mTable | 1.3.6.1.4.1.193.81.3.4.1.1.12 | NA | |||||||||||||||
table · not-accessible · current TBD | |||||||||||||||||
| RxfRLPMCurrent15mEntry | 1.3.6.1.4.1.193.81.3.4.1.1.12.1 | NA | |||||||||||||||
| CxfPMCurrent15mElapsedTime | 1.3.6.1.4.1.193.81.3.4.1.1.12.1.1 | Counter32 | RO | ||||||||||||||
column · Counter32 · read-only · current The number of seconds that have elapsed since the beginning of the current error-measurement period. | |||||||||||||||||
| CxfPMCurrent15mESs | 1.3.6.1.4.1.193.81.3.4.1.1.12.1.2 | PerfCurrentCount | RO | ||||||||||||||
column · PerfCurrentCount · read-only · current Error seconds in the current 15 minute interval. | |||||||||||||||||
| CxfPMCurrent15mSESs | 1.3.6.1.4.1.193.81.3.4.1.1.12.1.3 | PerfCurrentCount | RO | ||||||||||||||
column · PerfCurrentCount · read-only · current Severely error seconds in the current 15 minute interval. | |||||||||||||||||
| CxfPMCurrent15mBBEs | 1.3.6.1.4.1.193.81.3.4.1.1.12.1.4 | PerfCurrentCount | RO | ||||||||||||||
column · PerfCurrentCount · read-only · current Background Block Errors in the current 15 minute interval. | |||||||||||||||||
| CxfPMCurrent15mUASs | 1.3.6.1.4.1.193.81.3.4.1.1.12.1.5 | PerfCurrentCount | RO | ||||||||||||||
column · PerfCurrentCount · read-only · current Unavailable seconds (or Unavailable Time) in the current 15 minute interval. | |||||||||||||||||
| CxfPMCurrent15mBBs | 1.3.6.1.4.1.193.81.3.4.1.1.12.1.6 | PerfCurrentCount | RO | ||||||||||||||
column · PerfCurrentCount · read-only · current The number of Background Blocks encountered by a SONET/SDH Section in the current 15 minute interval. | |||||||||||||||||
| CxfPMCurrent15mRLTS1 | 1.3.6.1.4.1.193.81.3.4.1.1.12.1.7 | Integer32 (0..900 | -1) | RO | ||||||||||||||
column · Integer32 (0..900 | -1) · read-only · current Received Level 1 Threshold Second (RLTS1) 15 minute Number of seconds that the RF Input Power was below the RLTS1 in the current 15 minute interval. -1 indicates invalid value. Reset by xfTermPerfReset. | |||||||||||||||||
| CxfPMCurrent15mRLTS2 | 1.3.6.1.4.1.193.81.3.4.1.1.12.1.8 | Integer32 (0..900 | -1) | RO | ||||||||||||||
column · Integer32 (0..900 | -1) · read-only · current Received Level 2 Threshold Second (RLTS2) 15 minute Number of seconds that the RF Input Power was below the RLTS2 in the current 15 minute interval. -1 indicates invalid value. Reset by xfTermPerfReset. | |||||||||||||||||
| CxfPMCurrent15mRLMin | 1.3.6.1.4.1.193.81.3.4.1.1.12.1.9 | Integer32 (-999..-200 | 0) | RO | ||||||||||||||
column · Integer32 (-999..-200 | 0) · read-only · current Indicate Min RF Input level in current 15 minute interval. RF input level = value/10 dBm. Domain: [-99.9 ... -20.0 dBm] 0 (zero) indicates invalid value. Reset by xfTermPerfReset. | |||||||||||||||||
| CxfPMCurrent15mRLMax | 1.3.6.1.4.1.193.81.3.4.1.1.12.1.10 | Integer32 (-999..-200 | 0) | RO | ||||||||||||||
column · Integer32 (-999..-200 | 0) · read-only · current Indicate Max RF Input level in current 15 minute interval. RF input level = value/10 dBm. Domain: [-99.9 ... -20.0 dBm] 0 (zero) indicates invalid value. Reset by xfTermPerfReset. | |||||||||||||||||
| CxfPMCurrent15mTLTS1 | 1.3.6.1.4.1.193.81.3.4.1.1.12.1.11 | Integer32 (0..900 | -1) | RO | ||||||||||||||
column · Integer32 (0..900 | -1) · read-only · current Transmitted Level 1 Threshold Second (TLTS1) 15 minute Number of seconds that the RF Output Power was above the TLTS1 in the current 15 minute interval -1 indicates invalid value. Reset by xfTermPerfReset. | |||||||||||||||||
| CxfPMCurrent15mTLMin | 1.3.6.1.4.1.193.81.3.4.1.1.12.1.12 | Integer32 (-100..45 | 255) | RO | ||||||||||||||
column · Integer32 (-100..45 | 255) · read-only · current Indicate Min RF Output level in current 15 minute interval. RF output level = value dBm. Domain: [-100 ... 45 dBm] 255 indicates invalid value. Reset by xfTermPerfReset. | |||||||||||||||||
| CxfPMCurrent15mTLMax | 1.3.6.1.4.1.193.81.3.4.1.1.12.1.13 | Integer32 (-100..45 | 255) | RO | ||||||||||||||
column · Integer32 (-100..45 | 255) · read-only · current Indicate Max RF Output level in current 15 minute interval. RF output level = value dBm. Domain: [-100 ... 45 dBm] 255 indicates invalid value. Reset by xfTermPerfReset. | |||||||||||||||||
| CxfPMCurrent15mMSEMin | 1.3.6.1.4.1.193.81.3.4.1.1.12.1.14 | Integer32 (-1000..1000 | 2000) | RO | ||||||||||||||
column · Integer32 (-1000..1000 | 2000) · read-only · current Indicate Min MSE level in current 15 minute interval. Input level = value/10 dB. Domain: [-100.0 ... 100.0 dB] 2000 indicates invalid value. Reset by xfTermPerfReset. | |||||||||||||||||
| CxfPMCurrent15mMSEMax | 1.3.6.1.4.1.193.81.3.4.1.1.12.1.15 | Integer32 (-1000..1000 | 2000) | RO | ||||||||||||||
column · Integer32 (-1000..1000 | 2000) · read-only · current Indicate Max MSE level in current 15 minute interval. Input level = value/10 dB. Domain: [-100.0 ... 100.0 dB] 2000 indicates invalid value. Reset by xfTermPerfReset. | |||||||||||||||||
| CxfPMCurrent15mXPIMin | 1.3.6.1.4.1.193.81.3.4.1.1.12.1.16 | Integer32 (-1000..1000 | 2000) | RO | ||||||||||||||
column · Integer32 (-1000..1000 | 2000) · read-only · current Indicate Min Cross-Polar Interference (XPI) level in current 15 minute interval. Input level = value/10 dB. Domain: [-100.0 ... 100.0 dB] 2000 indicates invalid value. Reset by xfTermPerfReset. | |||||||||||||||||
| CxfPMCurrent15mXPIMax | 1.3.6.1.4.1.193.81.3.4.1.1.12.1.17 | Integer32 (-1000..1000 | 2000) | RO | ||||||||||||||
column · Integer32 (-1000..1000 | 2000) · read-only · current Indicate Max Cross-Polar Interference (XPI) level in current 15 minute interval. Input level = value/10 dB. Domain: [-100.0 ... 100.0 dB] 2000 indicates invalid value. Reset by xfTermPerfReset. | |||||||||||||||||
| CxfPMCurrent15mESR | 1.3.6.1.4.1.193.81.3.4.1.1.12.1.18 | PerfCurrentCount | RO | ||||||||||||||
column · PerfCurrentCount · read-only · current Error Seconds Ratio in the current 15 minute interval | |||||||||||||||||
| CxfPMCurrent15mSESR | 1.3.6.1.4.1.193.81.3.4.1.1.12.1.19 | PerfCurrentCount | RO | ||||||||||||||
column · PerfCurrentCount · read-only · current Severely Error Seconds Ratio in the current 15 minute interval | |||||||||||||||||
| CxfPMCurrent15mBBER | 1.3.6.1.4.1.193.81.3.4.1.1.12.1.20 | HCPerfCurrentCount | RO | ||||||||||||||
column · HCPerfCurrentCount · read-only · current Background Block Errors Ratio in the current 15 minute interval | |||||||||||||||||
| TxfRLPMInterval15mTable | 1.3.6.1.4.1.193.81.3.4.1.1.13 | NA | |||||||||||||||
table · not-accessible · current TBD | |||||||||||||||||
| RxfRLPMInterval15mEntry | 1.3.6.1.4.1.193.81.3.4.1.1.13.1 | NA | |||||||||||||||
| CxfPMInterval15mIntervalNumber | 1.3.6.1.4.1.193.81.3.4.1.1.13.1.1 | Integer32 (1..96) | RO | ||||||||||||||
column · Integer32 (1..96) · read-only · current A number between 1 and 96, which identifies the interval for which the set of statistics is available. The interval identified by 1 is the most recently completed 15 minute interval, and the interval identified by N is the interval immediately preceding the one identified by N-1. | |||||||||||||||||
| CxfPMInterval15mESs | 1.3.6.1.4.1.193.81.3.4.1.1.13.1.2 | PerfIntervalCount | RO | ||||||||||||||
column · PerfIntervalCount · read-only · current Error seconds in the xfPMInterval15mIntervalNumber 15 minute interval | |||||||||||||||||
| CxfPMInterval15mSESs | 1.3.6.1.4.1.193.81.3.4.1.1.13.1.3 | PerfIntervalCount | RO | ||||||||||||||
column · PerfIntervalCount · read-only · current Severely error seconds in the xfPDHCompInterval15mIntervalNumber 15 minute interval. | |||||||||||||||||
| CxfPMInterval15mBBEs | 1.3.6.1.4.1.193.81.3.4.1.1.13.1.4 | PerfIntervalCount | RO | ||||||||||||||
column · PerfIntervalCount · read-only · current Background Block Errors in the xfPDHCompInterval15mIntervalNumber 15 minute intervall. | |||||||||||||||||
| CxfPMInterval15mUASs | 1.3.6.1.4.1.193.81.3.4.1.1.13.1.5 | PerfIntervalCount | RO | ||||||||||||||
column · PerfIntervalCount · read-only · current UnAvailable Seconds in the xfPDHCompInterval15mIntervalNumber 15 minute interval. | |||||||||||||||||
| CxfPMInterval15mBBs | 1.3.6.1.4.1.193.81.3.4.1.1.13.1.6 | PerfIntervalCount | RO | ||||||||||||||
column · PerfIntervalCount · read-only · current Background blocks in the xfPDHCompInterval15mIntervalNumber 15 minute interval. | |||||||||||||||||
| CxfPMInterval15mValidData | 1.3.6.1.4.1.193.81.3.4.1.1.13.1.7 | TruthValue | RO | ||||||||||||||
column · TruthValue · read-only · current This variable indicates if the data for this interval is valid. | |||||||||||||||||
| CxfPMInterval15mRLTS1 | 1.3.6.1.4.1.193.81.3.4.1.1.13.1.8 | Integer32 (0..900 | -1) | RO | ||||||||||||||
column · Integer32 (0..900 | -1) · read-only · current Received Level 1 Threshold Second (RLTS1) 15 minute Number of seconds that the RF Input Power was below the RLTS1 in the previous 15 minute interval. -1 indicates invalid value. Reset by xfTermPerfReset. | |||||||||||||||||
| CxfPMInterval15mRLTS2 | 1.3.6.1.4.1.193.81.3.4.1.1.13.1.9 | Integer32 (0..900 | -1) | RO | ||||||||||||||
column · Integer32 (0..900 | -1) · read-only · current Received Level 2 Threshold Second (RLTS2) 15 minute Number of seconds that the RF Input Power was below the RLTS2 in the previous 15 minute interval. -1 indicates invalid value. Reset by xfTermPerfReset. | |||||||||||||||||
| CxfPMInterval15mRLMin | 1.3.6.1.4.1.193.81.3.4.1.1.13.1.10 | Integer32 (-999..-200 | 0) | RO | ||||||||||||||
column · Integer32 (-999..-200 | 0) · read-only · current Indicate Min RF Input level in previous 15 minute interval. RF input level = value/10 dBm. Domain: [-99.9 ... -20.0 dBm] 0 (zero) indicates invalid value. Reset by xfTermPerfReset. | |||||||||||||||||
| CxfPMInterval15mRLMax | 1.3.6.1.4.1.193.81.3.4.1.1.13.1.11 | Integer32 (-999..-200 | 0) | RO | ||||||||||||||
column · Integer32 (-999..-200 | 0) · read-only · current Indicate Max RF Input level in previous 15 minute interval. RF input level = value/10 dBm. Domain: [-99.9 ... -20.0 dBm] 0 (zero) indicates invalid value. Reset by xfTermPerfReset. | |||||||||||||||||
| CxfPMInterval15mTLTS1 | 1.3.6.1.4.1.193.81.3.4.1.1.13.1.12 | Integer32 (0..900 | -1) | RO | ||||||||||||||
column · Integer32 (0..900 | -1) · read-only · current Transmitted Level 1 Threshold Second (TLTS1) 15 minute Number of seconds that the RF Output Power was above the TLTS1 in the previous 15 minute interval -1 indicates invalid value. Reset by xfTermPerfReset. | |||||||||||||||||
| CxfPMInterval15mTLMin | 1.3.6.1.4.1.193.81.3.4.1.1.13.1.13 | Integer32 (-100..45 | 255) | RO | ||||||||||||||
column · Integer32 (-100..45 | 255) · read-only · current Indicate Min RF Output level in previous 15 minute interval. RF output level = value dBm. Domain: [-100 ... 45 dBm] 255 indicates invalid value. Reset by xfTermPerfReset. | |||||||||||||||||
| CxfPMInterval15mTLMax | 1.3.6.1.4.1.193.81.3.4.1.1.13.1.14 | Integer32 (-100..45 | 255) | RO | ||||||||||||||
column · Integer32 (-100..45 | 255) · read-only · current Indicate Max RF Output level in previous 15 minute interval. RF output level = value dBm. Domain: [-100 ... 45 dBm] 255 indicates invalid value. Reset by xfTermPerfReset. | |||||||||||||||||
| CxfPMInterval15mMSEMin | 1.3.6.1.4.1.193.81.3.4.1.1.13.1.15 | Integer32 (-1000..1000 | 2000) | RO | ||||||||||||||
column · Integer32 (-1000..1000 | 2000) · read-only · current Indicate Min MSE level in previous 15 minute interval. Input level = value/10 dB. Domain: [-100.0 ... 100.0 dB] 2000 indicates invalid value. Reset by xfTermPerfReset. | |||||||||||||||||
| CxfPMInterval15mMSEMax | 1.3.6.1.4.1.193.81.3.4.1.1.13.1.16 | Integer32 (-1000..1000 | 2000) | RO | ||||||||||||||
column · Integer32 (-1000..1000 | 2000) · read-only · current Indicate Max MSE level in previous 15 minute interval. Input level = value/10 dB. Domain: [-100.0 ... 100.0 dB] 2000 indicates invalid value. Reset by xfTermPerfReset. | |||||||||||||||||
| CxfPMInterval15mXPIMin | 1.3.6.1.4.1.193.81.3.4.1.1.13.1.17 | Integer32 (-1000..1000 | 2000) | RO | ||||||||||||||
column · Integer32 (-1000..1000 | 2000) · read-only · current Indicate Min Cross-Polar Interference (XPI) level in previous 15 minute interval. Input level = value/10 dB. Domain: [-100.0 ... 100.0 dB] 2000 indicates invalid value. Reset by xfTermPerfReset. | |||||||||||||||||
| CxfPMInterval15mXPIMax | 1.3.6.1.4.1.193.81.3.4.1.1.13.1.18 | Integer32 (-1000..1000 | 2000) | RO | ||||||||||||||
column · Integer32 (-1000..1000 | 2000) · read-only · current Indicate Max Cross-Polar Interference (XPI) level in previous 15 minute interval. Input level = value/10 dB. Domain: [-100.0 ... 100.0 dB] 2000 indicates invalid value. Reset by xfTermPerfReset. | |||||||||||||||||
| TxfRLPtpTerminalXTable | 1.3.6.1.4.1.193.81.3.4.1.1.14 | NA | |||||||||||||||
table · not-accessible · current Extension table to xfRLPtpTerminalTable. The table is indexed with entLogicalIndex. | |||||||||||||||||
| RxfRLPtpTerminalXEntry | 1.3.6.1.4.1.193.81.3.4.1.1.14.1 | NA | |||||||||||||||
| CxfTermInterfaces | 1.3.6.1.4.1.193.81.3.4.1.1.14.1.1 | INTEGER | RW | ||||||||||||||
column · INTEGER · read-write · current Interface constellation for the terminal
| |||||||||||||||||
| CxfTermInterfacesCapability | 1.3.6.1.4.1.193.81.3.4.1.1.14.1.2 | Bits | RO | ||||||||||||||
column · Bits · read-only · current Interface constellation capability for the terminal
| |||||||||||||||||
| CxfTermChannelModeOperStatus | 1.3.6.1.4.1.193.81.3.4.1.1.14.1.3 | ChannelMode | RO | ||||||||||||||
column · ChannelMode · read-only · current Channel mode for the terminal (operational status). - ccdp(2): Co-Channel Dual Polarization (XPIC) - accp(3): Adjacent Channels Co-Polarization (non-XPIC) - acap(4): Adjacent Channels Alternate Polarization (non-XPIC) | |||||||||||||||||
| CxfTermXPICRestore | 1.3.6.1.4.1.193.81.3.4.1.1.14.1.4 | INTEGER | RW | ||||||||||||||
column · INTEGER · read-write · current Restore XPIC
| |||||||||||||||||
| CxfTermTribCapacityActual | 1.3.6.1.4.1.193.81.3.4.1.1.14.1.5 | Integer32 | RO | ||||||||||||||
column · Integer32 · read-only · current Actual tributary capacity | |||||||||||||||||
| CxfTermTribCapacityDesired | 1.3.6.1.4.1.193.81.3.4.1.1.14.1.6 | Integer32 | RW | ||||||||||||||
column · Integer32 · read-write · current Desired tributary capacity | |||||||||||||||||
| CxfTermBitPipeCapacity | 1.3.6.1.4.1.193.81.3.4.1.1.14.1.7 | Integer32 | RO | 239208 | |||||||||||||
column · Integer32 · read-only · current Bit pipe capacity, Kbps Example values from LibreNMS test devices
| |||||||||||||||||
| CxfTermRowIndex | 1.3.6.1.4.1.193.81.3.4.1.1.14.1.8 | Integer32 (1..100000) | RW | ||||||||||||||
column · Integer32 (1..100000) · read-write · current Points to a row in xfRlPtpTerminalCapabilityTable | |||||||||||||||||
| CxfTermCapabilitiesLastChange | 1.3.6.1.4.1.193.81.3.4.1.1.14.1.9 | TimeTicks | RO | ||||||||||||||
column · TimeTicks · read-only · current The value of sysUpTime at the time of the last creation or deletion of an entry in the xfRLPtpTerminalCapabilityTable. If the number of entries has been unchanged since the last re-initialization of the local network management subsystem, then this object contains a zero value. | |||||||||||||||||
| CxfTermActualRowIndex | 1.3.6.1.4.1.193.81.3.4.1.1.14.1.10 | Integer32 | RO | ||||||||||||||
column · Integer32 · read-only · current The actual row that is pointed out in xfRlPtpTerminalCapabilityTable | |||||||||||||||||
| CxfTermMaxRowIndex | 1.3.6.1.4.1.193.81.3.4.1.1.14.1.11 | Integer32 | RW | ||||||||||||||
column · Integer32 · read-write · current Points to a row in xfRlPtpTerminalCapabilityTable where the maximum capacity is, including license | |||||||||||||||||
| CxfTermAdaptiveManualRowIndex | 1.3.6.1.4.1.193.81.3.4.1.1.14.1.12 | Integer32 | RW | ||||||||||||||
column · Integer32 · read-write · current Manual row index | |||||||||||||||||
| CxfTermAdaptiveManualMode | 1.3.6.1.4.1.193.81.3.4.1.1.14.1.13 | TermAdaptiveManualMode | RW | ||||||||||||||
column · TermAdaptiveManualMode · read-write · current Adaptive manual mode - other(1) - disable(2)(default) - enable(3) - enabledAsRequest(4) | |||||||||||||||||
| CxfTermSpectrumEfficiencyClass | 1.3.6.1.4.1.193.81.3.4.1.1.14.1.14 | INTEGER | RW | ||||||||||||||
column · INTEGER · read-write · current Spectrum Efficiency Class: - other(1): unknown - sec2(2): spectrum eff. Class 2 - sec3(3): spectrum eff. Class 3 - sec4L(4): spectrum eff. Class 4L - sec4H(5): specturm eff. Class 4H - sec5A(6): spectrum eff. Class 5A - sec5B(7): spectrum eff. Class 5B - sec6A(8): spectrum eff. Class 6A - sec6B(9): spectrum eff. Class 6B Near end access: read-write Far end access: read-write (Traffic Node), read-only (other)
| |||||||||||||||||
| CxfTermSpectrumEfficiencyClassCapability | 1.3.6.1.4.1.193.81.3.4.1.1.14.1.15 | Bits | RO | ||||||||||||||
column · Bits · read-only · current Spectrum Efficiency Class Capability - 0 Sec2 Spectrum eff. Class 2 - 1 Sec3 Specturm eff. Class 3 - 2 Sec4L Specturm eff. Class 4L - 3 Sec4H Spectrum eff. Class 4H - 4 Sec5A Spectrum eff. Class 5A - 5 Sec5B Spectrum eff. Class 5B - 6 Sec6A Spectrum eff. Class 6A - 7 Sec6B Spectrum eff. Class 6B
| |||||||||||||||||
| CxfTermIpAddress | 1.3.6.1.4.1.193.81.3.4.1.1.14.1.16 | IpAddress | RO | ||||||||||||||
column · IpAddress · read-only · current LAN ip address | |||||||||||||||||
| CxfTermProtectionCapability | 1.3.6.1.4.1.193.81.3.4.1.1.14.1.17 | Bits | RO | ||||||||||||||
column · Bits · read-only · current Terminal protection capability - 0 Unprotected ............... The terminal supports 1+0 - 1 protectedHotStandby ....... The terminal supports 1+1 Hot Standby - 2 protectedWorkingStandby ... The terminal supports 1+1 Working Standby - 3 unprotectedSD ............. The terminal supports 1+0 with Space diversity - 4 nplus1 .................... The terminal supports N+1 protection (through RPS board) - 5 enhancedRLB ............... The terminal supports Enhanced Radio Link Bonding
| |||||||||||||||||
| CxfTermLineProtectionCapability | 1.3.6.1.4.1.193.81.3.4.1.1.14.1.18 | Bits | RO | ||||||||||||||
column · Bits · read-only · current Terminal Line protection capability - 0 unprotected ................. - 1 singleInterfaceLowSlot ...... - 2 singleInterfaceHighSlot ..... - 3 opticalSplitter ............. - 4 equipmentAndLineProtection ..
| |||||||||||||||||
| CxfTermTribAllocationActual | 1.3.6.1.4.1.193.81.3.4.1.1.14.1.19 | Bits | RO | ||||||||||||||
column · Bits · read-only · current Actual tributary allocation in a MMU2 D or MMU2 H, the rest is packet link
| |||||||||||||||||
| CxfTermTribAllocationDesired | 1.3.6.1.4.1.193.81.3.4.1.1.14.1.20 | Bits | RW | ||||||||||||||
column · Bits · read-write · current Desired tibutary allocation in a MMU2 D or MMU2 H, the rest is packet link
| |||||||||||||||||
| CxfTermAutoRemoveLoopEnable | 1.3.6.1.4.1.193.81.3.4.1.1.14.1.21 | TermAutoRemoveLoopEnable | RW | ||||||||||||||
column · TermAutoRemoveLoopEnable · read-write · current Auto Remove Loops - other(1) - enable(2) (default) - disable(3) | |||||||||||||||||
| CxfTermCapability | 1.3.6.1.4.1.193.81.3.4.1.1.14.1.22 | Bits | RO | ||||||||||||||
column · Bits · read-only · current Terminal capability
| |||||||||||||||||
| CxfTermCapacityLicense | 1.3.6.1.4.1.193.81.3.4.1.1.14.1.23 | INTEGER | RW | ||||||||||||||
column · INTEGER · read-write · current Licensetable
| |||||||||||||||||
| CxfTermFadingRates | 1.3.6.1.4.1.193.81.3.4.1.1.14.1.24 | INTEGER | RW | ||||||||||||||
column · INTEGER · read-write · current Fading rates - other(1): unknown - fr50(2): 50dB/s HighTroughputMode (default) - fr150(3): 100dB/s HighFadingResistanceMode
| |||||||||||||||||
| CxfTermFadingRatesCapability | 1.3.6.1.4.1.193.81.3.4.1.1.14.1.25 | Bits | RO | ||||||||||||||
column · Bits · read-only · current Fading rate capability - fr50(0): HighTroughputMode - fr100(1): HighFadingResistanceMode
| |||||||||||||||||
| CxfTermConfiguredBitPipeCapacity | 1.3.6.1.4.1.193.81.3.4.1.1.14.1.26 | Integer32 | RO | ||||||||||||||
column · Integer32 · read-only · current Configured bit pipe capacity, Kbps | |||||||||||||||||
| CxfTermTribCapacityConfigured | 1.3.6.1.4.1.193.81.3.4.1.1.14.1.27 | Integer32 | RO | ||||||||||||||
column · Integer32 · read-only · current Configured tributary capacity | |||||||||||||||||
| CxfTermPacketMaxCapacity | 1.3.6.1.4.1.193.81.3.4.1.1.14.1.28 | Integer32 | RO | ||||||||||||||
column · Integer32 · read-only · current Packet Max Capacity | |||||||||||||||||
| CxfTermPacketMinCapacity | 1.3.6.1.4.1.193.81.3.4.1.1.14.1.29 | Integer32 | RO | ||||||||||||||
column · Integer32 · read-only · current Packet Min Capacity | |||||||||||||||||
| TxfRlPtpTerminalCapabilityTable | 1.3.6.1.4.1.193.81.3.4.1.1.15 | NA | |||||||||||||||
table · not-accessible · current Table for misc. capability informatio. | |||||||||||||||||
| RxfRlPtpTerminalCapabilityEntry | 1.3.6.1.4.1.193.81.3.4.1.1.15.1 | NA | |||||||||||||||
| CxfTermChannelSpacing | 1.3.6.1.4.1.193.81.3.4.1.1.15.1.1 | INTEGER | RO | ||||||||||||||
column · INTEGER · read-only · current Channel spacing - ETSI: 3.5, 7, 14, 28, 40, 56 MHz - ANSI: 10, 20, 30, 40, 50, 60 MHz
| |||||||||||||||||
| CxfTermChannelModulation | 1.3.6.1.4.1.193.81.3.4.1.1.15.1.2 | TermModulation | RO | ||||||||||||||
column · TermModulation · read-only · current Channel modulation - cqpsk(2) CQPSK - qam16(3) 16-QAM - qam128(4) 128-QAM - qam32(5) 32-QAM - qam64(6) 64-QAM - qam4(7) 4-QAM - qam8(8) 8-QAM - qam256(9) 256-QAM - qam512(10) 512-QAM - qam1024(11) 1024-QAM | |||||||||||||||||
| CxfTermMaxTribCapacity | 1.3.6.1.4.1.193.81.3.4.1.1.15.1.3 | Integer32 | RO | ||||||||||||||
column · Integer32 · read-only · current Max number of tributaries | |||||||||||||||||
| CxfTermDCNCapacity | 1.3.6.1.4.1.193.81.3.4.1.1.15.1.4 | Integer32 | RO | ||||||||||||||
column · Integer32 · read-only · current DCN hop capacity | |||||||||||||||||
| CxfTermValidRow | 1.3.6.1.4.1.193.81.3.4.1.1.15.1.5 | INTEGER | RO | ||||||||||||||
column · INTEGER · read-only · current Max capacity license - vr0(0) = invalid row - vr10(1) = 10 Mbps, no license - vr25(2) = 25 Mbps - vr50(3) = 50 Mbps - vr100(4) = 100 Mbps - vr15(5) = 15 Mbps - vr30(6) = 30 Mbps - vr60(7) = 60 Mbps - vr125(8) = 125 Mbps - vr200(9) = 200 Mbps - vr350(10) = 350 Mbps - vr4(11) = 4 Mbps, no license - vr500(12) = 500 Mbps - vr150(13) = 150 Mbps - vr250(14) = 250 Mbps - vr300(15) = 300 Mbps - vr400(16) = 400 Mbps - vr450(17) = 450 Mbps
| |||||||||||||||||
| CxfTermMaxCapacity | 1.3.6.1.4.1.193.81.3.4.1.1.15.1.6 | Integer32 | RO | ||||||||||||||
column · Integer32 · read-only · current Max capacity | |||||||||||||||||
| CxfTermSpectrumEfficiencyClassObsolete | 1.3.6.1.4.1.193.81.3.4.1.1.15.1.7 | TermRauSec | RO | obsolete | |||||||||||||
column · TermRauSec · read-only · obsolete xfTermSpectrumEfficiencyClassObsolete | |||||||||||||||||
| CxfTermFrameFormatType | 1.3.6.1.4.1.193.81.3.4.1.1.15.1.8 | INTEGER | RO | ||||||||||||||
column · INTEGER · read-only · current Frame format type - fftOther(0) - fftStatic(1) - fftAdmod(2) - fftXpic(3) - fftXpicAdmod(4) - fftLegacy(5) - fftStaticLH(6) - fftAdmodLH(7) - fftXpicLH(8) - fftXpicAdmodLH(9) - fftAdmodStatic(10) - fftXpicAdmodStatic(11) - fftAdmodStaticLH(12) - fftXpicAdmodStaticLH(13)
| |||||||||||||||||
| CxfTermFrameFormatRev | 1.3.6.1.4.1.193.81.3.4.1.1.15.1.9 | INTEGER | RO | ||||||||||||||
column · INTEGER · read-only · current Frame format revision
| |||||||||||||||||
| CxfTermBerAlarmThresholdCapability | 1.3.6.1.4.1.193.81.3.4.1.1.15.1.10 | Bits | RO | ||||||||||||||
column · Bits · read-only · current List of the allowed BER thresholds
| |||||||||||||||||
| TxfRLPMAMConfigTable | 1.3.6.1.4.1.193.81.3.4.1.1.16 | NA | |||||||||||||||
table · not-accessible · current Alarm threshold values for RL PM | |||||||||||||||||
| RxfRLPMAMConfigEntry | 1.3.6.1.4.1.193.81.3.4.1.1.16.1 | NA | |||||||||||||||
| CxfPMAMSetThreshold15m | 1.3.6.1.4.1.193.81.3.4.1.1.16.1.1 | Integer32 | RW | ||||||||||||||
column · Integer32 · read-write · current The 15 minute set threshold for AdMod. Near end access: read-write Far end access: No access | |||||||||||||||||
| CxfPMAMSetThreshold24h | 1.3.6.1.4.1.193.81.3.4.1.1.16.1.2 | Integer32 | RW | ||||||||||||||
column · Integer32 · read-write · current The 24 hour set threshold for AdMod. Near end access: read-write Far end access: No access | |||||||||||||||||
| CxfPMAMResetThreshold15m | 1.3.6.1.4.1.193.81.3.4.1.1.16.1.3 | Integer32 | RW | ||||||||||||||
column · Integer32 · read-write · current The 15 minute reset threshold for AdMod. Near end access: read-write Far end access: No access | |||||||||||||||||
| CxfPMAMStatus | 1.3.6.1.4.1.193.81.3.4.1.1.16.1.4 | Bits | RO | ||||||||||||||
column · Bits · read-only · current Threshold alarm status
| |||||||||||||||||
| CxfPMAMValidData | 1.3.6.1.4.1.193.81.3.4.1.1.16.1.5 | Bits | RO | ||||||||||||||
column · Bits · read-only · current It reports which modulation's PM data that are valid.
| |||||||||||||||||
| TxfRLPMAMCurrent24hTable | 1.3.6.1.4.1.193.81.3.4.1.1.17 | NA | |||||||||||||||
table · not-accessible · current TBD | |||||||||||||||||
| RxfRLPMAMCurrent24hEntry | 1.3.6.1.4.1.193.81.3.4.1.1.17.1 | NA | |||||||||||||||
| CxfPMAMCurrent24h4QAM | 1.3.6.1.4.1.193.81.3.4.1.1.17.1.1 | PerfCurrentCount | RO | ||||||||||||||
column · PerfCurrentCount · read-only · current Valid time since reset | |||||||||||||||||
| CxfPMAMCurrent24h8QAM | 1.3.6.1.4.1.193.81.3.4.1.1.17.1.2 | PerfCurrentCount | RO | ||||||||||||||
column · PerfCurrentCount · read-only · current Valid time since reset | |||||||||||||||||
| CxfPMAMCurrent24h16QAM | 1.3.6.1.4.1.193.81.3.4.1.1.17.1.3 | PerfCurrentCount | RO | ||||||||||||||
column · PerfCurrentCount · read-only · current Valid time since reset | |||||||||||||||||
| CxfPMAMCurrent24h32QAM | 1.3.6.1.4.1.193.81.3.4.1.1.17.1.4 | PerfCurrentCount | RO | ||||||||||||||
column · PerfCurrentCount · read-only · current Valid time since reset | |||||||||||||||||
| CxfPMAMCurrent24h64QAM | 1.3.6.1.4.1.193.81.3.4.1.1.17.1.5 | PerfCurrentCount | RO | ||||||||||||||
column · PerfCurrentCount · read-only · current Valid time since reset | |||||||||||||||||
| CxfPMAMCurrent24h128QAM | 1.3.6.1.4.1.193.81.3.4.1.1.17.1.6 | PerfCurrentCount | RO | ||||||||||||||
column · PerfCurrentCount · read-only · current Valid time since reset | |||||||||||||||||
| CxfPMAMCurrent24h256QAM | 1.3.6.1.4.1.193.81.3.4.1.1.17.1.7 | PerfCurrentCount | RO | ||||||||||||||
column · PerfCurrentCount · read-only · current Valid time since reset | |||||||||||||||||
| CxfPMAMCurrent24h512QAM | 1.3.6.1.4.1.193.81.3.4.1.1.17.1.8 | PerfCurrentCount | RO | ||||||||||||||
column · PerfCurrentCount · read-only · current Valid time since reset | |||||||||||||||||
| CxfPMAMCurrent24h1024QAM | 1.3.6.1.4.1.193.81.3.4.1.1.17.1.9 | PerfCurrentCount | RO | ||||||||||||||
column · PerfCurrentCount · read-only · current Valid time since reset | |||||||||||||||||
| CxfPMAMCurrent24h4QAMEnRLB | 1.3.6.1.4.1.193.81.3.4.1.1.17.1.10 | PerfCurrentCount | RO | ||||||||||||||
column · PerfCurrentCount · read-only · current Valid time since reset | |||||||||||||||||
| CxfPMAMCurrent24h8QAMEnRLB | 1.3.6.1.4.1.193.81.3.4.1.1.17.1.11 | PerfCurrentCount | RO | ||||||||||||||
column · PerfCurrentCount · read-only · current Valid time since reset | |||||||||||||||||
| CxfPMAMCurrent24h16QAMEnRLB | 1.3.6.1.4.1.193.81.3.4.1.1.17.1.12 | PerfCurrentCount | RO | ||||||||||||||
column · PerfCurrentCount · read-only · current Valid time since reset | |||||||||||||||||
| CxfPMAMCurrent24h32QAMEnRLB | 1.3.6.1.4.1.193.81.3.4.1.1.17.1.13 | PerfCurrentCount | RO | ||||||||||||||
column · PerfCurrentCount · read-only · current Valid time since reset | |||||||||||||||||
| CxfPMAMCurrent24h64QAMEnRLB | 1.3.6.1.4.1.193.81.3.4.1.1.17.1.14 | PerfCurrentCount | RO | ||||||||||||||
column · PerfCurrentCount · read-only · current Valid time since reset | |||||||||||||||||
| CxfPMAMCurrent24h128QAMEnRLB | 1.3.6.1.4.1.193.81.3.4.1.1.17.1.15 | PerfCurrentCount | RO | ||||||||||||||
column · PerfCurrentCount · read-only · current Valid time since reset | |||||||||||||||||
| CxfPMAMCurrent24h256QAMEnRLB | 1.3.6.1.4.1.193.81.3.4.1.1.17.1.16 | PerfCurrentCount | RO | ||||||||||||||
column · PerfCurrentCount · read-only · current Valid time since reset | |||||||||||||||||
| CxfPMAMCurrent24h512QAMEnRLB | 1.3.6.1.4.1.193.81.3.4.1.1.17.1.17 | PerfCurrentCount | RO | ||||||||||||||
column · PerfCurrentCount · read-only · current Valid time since reset | |||||||||||||||||
| CxfPMAMCurrent24h1024QAMEnRLB | 1.3.6.1.4.1.193.81.3.4.1.1.17.1.18 | PerfCurrentCount | RO | ||||||||||||||
column · PerfCurrentCount · read-only · current Valid time since reset | |||||||||||||||||
| TxfRLPMAMInterval24hTable | 1.3.6.1.4.1.193.81.3.4.1.1.18 | NA | |||||||||||||||
table · not-accessible · current TBD | |||||||||||||||||
| RxfRLPMAMInterval24hEntry | 1.3.6.1.4.1.193.81.3.4.1.1.18.1 | NA | |||||||||||||||
| CxfPMAMInterval24h4QAM | 1.3.6.1.4.1.193.81.3.4.1.1.18.1.1 | PerfIntervalCount | RO | ||||||||||||||
column · PerfIntervalCount · read-only · current Interval count. | |||||||||||||||||
| CxfPMAMInterval24h8QAM | 1.3.6.1.4.1.193.81.3.4.1.1.18.1.2 | PerfIntervalCount | RO | ||||||||||||||
column · PerfIntervalCount · read-only · current Interval count. | |||||||||||||||||
| CxfPMAMInterval24h16QAM | 1.3.6.1.4.1.193.81.3.4.1.1.18.1.3 | PerfIntervalCount | RO | ||||||||||||||
column · PerfIntervalCount · read-only · current Interval count. | |||||||||||||||||
| CxfPMAMInterval24h32QAM | 1.3.6.1.4.1.193.81.3.4.1.1.18.1.4 | PerfIntervalCount | RO | ||||||||||||||
column · PerfIntervalCount · read-only · current Interval count. | |||||||||||||||||
| CxfPMAMInterval24h64QAM | 1.3.6.1.4.1.193.81.3.4.1.1.18.1.5 | PerfIntervalCount | RO | ||||||||||||||
column · PerfIntervalCount · read-only · current Interval count. | |||||||||||||||||
| CxfPMAMInterval24h128QAM | 1.3.6.1.4.1.193.81.3.4.1.1.18.1.6 | PerfIntervalCount | RO | ||||||||||||||
column · PerfIntervalCount · read-only · current Interval count. | |||||||||||||||||
| CxfPMAMInterval24h256QAM | 1.3.6.1.4.1.193.81.3.4.1.1.18.1.7 | PerfIntervalCount | RO | ||||||||||||||
column · PerfIntervalCount · read-only · current Interval count. | |||||||||||||||||
| CxfPMAMInterval24h512QAM | 1.3.6.1.4.1.193.81.3.4.1.1.18.1.8 | PerfIntervalCount | RO | ||||||||||||||
column · PerfIntervalCount · read-only · current Interval count. | |||||||||||||||||
| CxfPMAMInterval24hValidData | 1.3.6.1.4.1.193.81.3.4.1.1.18.1.9 | TruthValue | RO | ||||||||||||||
column · TruthValue · read-only · current This variable indicates whether the data for this interval is valid. | |||||||||||||||||
| CxfPMAMInterval24h1024QAM | 1.3.6.1.4.1.193.81.3.4.1.1.18.1.10 | PerfIntervalCount | RO | ||||||||||||||
column · PerfIntervalCount · read-only · current Interval count. | |||||||||||||||||
| CxfPMAMInterval24h4QAMEnRLB | 1.3.6.1.4.1.193.81.3.4.1.1.18.1.11 | PerfIntervalCount | RO | ||||||||||||||
column · PerfIntervalCount · read-only · current Interval count. | |||||||||||||||||
| CxfPMAMInterval24h8QAMEnRLB | 1.3.6.1.4.1.193.81.3.4.1.1.18.1.12 | PerfIntervalCount | RO | ||||||||||||||
column · PerfIntervalCount · read-only · current Interval count. | |||||||||||||||||
| CxfPMAMInterval24h16QAMEnRLB | 1.3.6.1.4.1.193.81.3.4.1.1.18.1.13 | PerfIntervalCount | RO | ||||||||||||||
column · PerfIntervalCount · read-only · current Interval count. | |||||||||||||||||
| CxfPMAMInterval24h32QAMEnRLB | 1.3.6.1.4.1.193.81.3.4.1.1.18.1.14 | PerfIntervalCount | RO | ||||||||||||||
column · PerfIntervalCount · read-only · current Interval count. | |||||||||||||||||
| CxfPMAMInterval24h64QAMEnRLB | 1.3.6.1.4.1.193.81.3.4.1.1.18.1.15 | PerfIntervalCount | RO | ||||||||||||||
column · PerfIntervalCount · read-only · current Interval count. | |||||||||||||||||
| CxfPMAMInterval24h128QAMEnRLB | 1.3.6.1.4.1.193.81.3.4.1.1.18.1.16 | PerfIntervalCount | RO | ||||||||||||||
column · PerfIntervalCount · read-only · current Interval count. | |||||||||||||||||
| CxfPMAMInterval24h256QAMEnRLB | 1.3.6.1.4.1.193.81.3.4.1.1.18.1.17 | PerfIntervalCount | RO | ||||||||||||||
column · PerfIntervalCount · read-only · current Interval count. | |||||||||||||||||
| CxfPMAMInterval24h512QAMEnRLB | 1.3.6.1.4.1.193.81.3.4.1.1.18.1.18 | PerfIntervalCount | RO | ||||||||||||||
column · PerfIntervalCount · read-only · current Interval count. | |||||||||||||||||
| CxfPMAMInterval24h1024QAMEnRLB | 1.3.6.1.4.1.193.81.3.4.1.1.18.1.19 | PerfIntervalCount | RO | ||||||||||||||
column · PerfIntervalCount · read-only · current Interval count. | |||||||||||||||||
| TxfRLPMAMCurrent15mTable | 1.3.6.1.4.1.193.81.3.4.1.1.19 | NA | |||||||||||||||
table · not-accessible · current TBD | |||||||||||||||||
| RxfRLPMAMCurrent15mEntry | 1.3.6.1.4.1.193.81.3.4.1.1.19.1 | NA | |||||||||||||||
| CxfPMAMCurrent15m4QAM | 1.3.6.1.4.1.193.81.3.4.1.1.19.1.1 | PerfCurrentCount | RO | ||||||||||||||
column · PerfCurrentCount · read-only · current Valid interval time since reset. | |||||||||||||||||
| CxfPMAMCurrent15m8QAM | 1.3.6.1.4.1.193.81.3.4.1.1.19.1.2 | PerfCurrentCount | RO | ||||||||||||||
column · PerfCurrentCount · read-only · current Valid interval time since reset. | |||||||||||||||||
| CxfPMAMCurrent15m16QAM | 1.3.6.1.4.1.193.81.3.4.1.1.19.1.3 | PerfCurrentCount | RO | ||||||||||||||
column · PerfCurrentCount · read-only · current Valid interval time since reset. | |||||||||||||||||
| CxfPMAMCurrent15m32QAM | 1.3.6.1.4.1.193.81.3.4.1.1.19.1.4 | PerfCurrentCount | RO | ||||||||||||||
column · PerfCurrentCount · read-only · current Valid interval time since reset. | |||||||||||||||||
| CxfPMAMCurrent15m64QAM | 1.3.6.1.4.1.193.81.3.4.1.1.19.1.5 | PerfCurrentCount | RO | ||||||||||||||
column · PerfCurrentCount · read-only · current Valid interval time since reset. | |||||||||||||||||
| CxfPMAMCurrent15m128QAM | 1.3.6.1.4.1.193.81.3.4.1.1.19.1.6 | PerfCurrentCount | RO | ||||||||||||||
column · PerfCurrentCount · read-only · current Valid interval time since reset. | |||||||||||||||||
| CxfPMAMCurrent15m256QAM | 1.3.6.1.4.1.193.81.3.4.1.1.19.1.7 | PerfCurrentCount | RO | ||||||||||||||
column · PerfCurrentCount · read-only · current Valid interval time since reset. | |||||||||||||||||
| CxfPMAMCurrent15m512QAM | 1.3.6.1.4.1.193.81.3.4.1.1.19.1.8 | PerfCurrentCount | RO | ||||||||||||||
column · PerfCurrentCount · read-only · current Valid interval time since reset. | |||||||||||||||||
| CxfPMAMCurrent15m1024QAM | 1.3.6.1.4.1.193.81.3.4.1.1.19.1.9 | PerfCurrentCount | RO | ||||||||||||||
column · PerfCurrentCount · read-only · current Valid interval time since reset. | |||||||||||||||||
| CxfPMAMCurrent15m4QAMEnRLB | 1.3.6.1.4.1.193.81.3.4.1.1.19.1.10 | PerfCurrentCount | RO | ||||||||||||||
column · PerfCurrentCount · read-only · current Valid interval time since reset. | |||||||||||||||||
| CxfPMAMCurrent15m8QAMEnRLB | 1.3.6.1.4.1.193.81.3.4.1.1.19.1.11 | PerfCurrentCount | RO | ||||||||||||||
column · PerfCurrentCount · read-only · current Valid interval time since reset. | |||||||||||||||||
| CxfPMAMCurrent15m16QAMEnRLB | 1.3.6.1.4.1.193.81.3.4.1.1.19.1.12 | PerfCurrentCount | RO | ||||||||||||||
column · PerfCurrentCount · read-only · current Valid interval time since reset. | |||||||||||||||||
| CxfPMAMCurrent15m32QAMEnRLB | 1.3.6.1.4.1.193.81.3.4.1.1.19.1.13 | PerfCurrentCount | RO | ||||||||||||||
column · PerfCurrentCount · read-only · current Valid interval time since reset. | |||||||||||||||||
| CxfPMAMCurrent15m64QAMEnRLB | 1.3.6.1.4.1.193.81.3.4.1.1.19.1.14 | PerfCurrentCount | RO | ||||||||||||||
column · PerfCurrentCount · read-only · current Valid interval time since reset. | |||||||||||||||||
| CxfPMAMCurrent15m128QAMEnRLB | 1.3.6.1.4.1.193.81.3.4.1.1.19.1.15 | PerfCurrentCount | RO | ||||||||||||||
column · PerfCurrentCount · read-only · current Valid interval time since reset. | |||||||||||||||||
| CxfPMAMCurrent15m256QAMEnRLB | 1.3.6.1.4.1.193.81.3.4.1.1.19.1.16 | PerfCurrentCount | RO | ||||||||||||||
column · PerfCurrentCount · read-only · current Valid interval time since reset. | |||||||||||||||||
| CxfPMAMCurrent15m512QAMEnRLB | 1.3.6.1.4.1.193.81.3.4.1.1.19.1.17 | PerfCurrentCount | RO | ||||||||||||||
column · PerfCurrentCount · read-only · current Valid interval time since reset. | |||||||||||||||||
| CxfPMAMCurrent15m1024QAMEnRLB | 1.3.6.1.4.1.193.81.3.4.1.1.19.1.18 | PerfCurrentCount | RO | ||||||||||||||
column · PerfCurrentCount · read-only · current Valid interval time since reset. | |||||||||||||||||
| TxfRLPMAMInterval15mTable | 1.3.6.1.4.1.193.81.3.4.1.1.20 | NA | |||||||||||||||
table · not-accessible · current TBD | |||||||||||||||||
| RxfRLPMAMInterval15mEntry | 1.3.6.1.4.1.193.81.3.4.1.1.20.1 | NA | |||||||||||||||
| CxfPMAMInterval15mIntervalNumber | 1.3.6.1.4.1.193.81.3.4.1.1.20.1.1 | Integer32 (1..96) | RO | ||||||||||||||
column · Integer32 (1..96) · read-only · current A number between 1 and 96, which identifies the interval for which the set of statistics is available. The interval identified by 1 is the most recently completed 15 minute interval, and the interval identified by N is the interval immediately preceding the one identified by N-1. | |||||||||||||||||
| CxfPMAMInterval15m4QAM | 1.3.6.1.4.1.193.81.3.4.1.1.20.1.2 | PerfIntervalCount | RO | ||||||||||||||
column · PerfIntervalCount · read-only · current Interval count. | |||||||||||||||||
| CxfPMAMInterval15m8QAM | 1.3.6.1.4.1.193.81.3.4.1.1.20.1.3 | PerfIntervalCount | RO | ||||||||||||||
column · PerfIntervalCount · read-only · current Interval count. | |||||||||||||||||
| CxfPMAMInterval15m16QAM | 1.3.6.1.4.1.193.81.3.4.1.1.20.1.4 | PerfIntervalCount | RO | ||||||||||||||
column · PerfIntervalCount · read-only · current Interval count. | |||||||||||||||||
| CxfPMAMInterval15m32QAM | 1.3.6.1.4.1.193.81.3.4.1.1.20.1.5 | PerfIntervalCount | RO | ||||||||||||||
column · PerfIntervalCount · read-only · current Interval count. | |||||||||||||||||
| CxfPMAMInterval15m64QAM | 1.3.6.1.4.1.193.81.3.4.1.1.20.1.6 | PerfIntervalCount | RO | ||||||||||||||
column · PerfIntervalCount · read-only · current Interval count. | |||||||||||||||||
| CxfPMAMInterval15m128QAM | 1.3.6.1.4.1.193.81.3.4.1.1.20.1.7 | PerfIntervalCount | RO | ||||||||||||||
column · PerfIntervalCount · read-only · current Interval count. | |||||||||||||||||
| CxfPMAMInterval15m256QAM | 1.3.6.1.4.1.193.81.3.4.1.1.20.1.8 | PerfIntervalCount | RO | ||||||||||||||
column · PerfIntervalCount · read-only · current Interval count. | |||||||||||||||||
| CxfPMAMInterval15m512QAM | 1.3.6.1.4.1.193.81.3.4.1.1.20.1.9 | PerfIntervalCount | RO | ||||||||||||||
column · PerfIntervalCount · read-only · current Interval count. | |||||||||||||||||
| CxfPMAMInterval15mValidData | 1.3.6.1.4.1.193.81.3.4.1.1.20.1.10 | TruthValue | RO | ||||||||||||||
column · TruthValue · read-only · current This variable indicates whether the data for this interval is valid. | |||||||||||||||||
| CxfPMAMInterval15m1024QAM | 1.3.6.1.4.1.193.81.3.4.1.1.20.1.11 | PerfIntervalCount | RO | ||||||||||||||
column · PerfIntervalCount · read-only · current Interval count. | |||||||||||||||||
| CxfPMAMInterval15m4QAMEnRLB | 1.3.6.1.4.1.193.81.3.4.1.1.20.1.12 | PerfIntervalCount | RO | ||||||||||||||
column · PerfIntervalCount · read-only · current Interval count. | |||||||||||||||||
| CxfPMAMInterval15m8QAMEnRLB | 1.3.6.1.4.1.193.81.3.4.1.1.20.1.13 | PerfIntervalCount | RO | ||||||||||||||
column · PerfIntervalCount · read-only · current Interval count. | |||||||||||||||||
| CxfPMAMInterval15m16QAMEnRLB | 1.3.6.1.4.1.193.81.3.4.1.1.20.1.14 | PerfIntervalCount | RO | ||||||||||||||
column · PerfIntervalCount · read-only · current Interval count. | |||||||||||||||||
| CxfPMAMInterval15m32QAMEnRLB | 1.3.6.1.4.1.193.81.3.4.1.1.20.1.15 | PerfIntervalCount | RO | ||||||||||||||
column · PerfIntervalCount · read-only · current Interval count. | |||||||||||||||||
| CxfPMAMInterval15m64QAMEnRLB | 1.3.6.1.4.1.193.81.3.4.1.1.20.1.16 | PerfIntervalCount | RO | ||||||||||||||
column · PerfIntervalCount · read-only · current Interval count. | |||||||||||||||||
| CxfPMAMInterval15m128QAMEnRLB | 1.3.6.1.4.1.193.81.3.4.1.1.20.1.17 | PerfIntervalCount | RO | ||||||||||||||
column · PerfIntervalCount · read-only · current Interval count. | |||||||||||||||||
| CxfPMAMInterval15m256QAMEnRLB | 1.3.6.1.4.1.193.81.3.4.1.1.20.1.18 | PerfIntervalCount | RO | ||||||||||||||
column · PerfIntervalCount · read-only · current Interval count. | |||||||||||||||||
| CxfPMAMInterval15m512QAMEnRLB | 1.3.6.1.4.1.193.81.3.4.1.1.20.1.19 | PerfIntervalCount | RO | ||||||||||||||
column · PerfIntervalCount · read-only · current Interval count. | |||||||||||||||||
| CxfPMAMInterval15m1024QAMEnRLB | 1.3.6.1.4.1.193.81.3.4.1.1.20.1.20 | PerfIntervalCount | RO | ||||||||||||||
column · PerfIntervalCount · read-only · current Interval count. | |||||||||||||||||
| TxfRLPtpTerminalCapacityLicenseTable | 1.3.6.1.4.1.193.81.3.4.1.1.21 | NA | |||||||||||||||
table · not-accessible · current TBD | |||||||||||||||||
| RxfRLPtpTerminalCapacityLicenseEntry | 1.3.6.1.4.1.193.81.3.4.1.1.21.1 | NA | |||||||||||||||
| CxfTermCapacityLicenseRange | 1.3.6.1.4.1.193.81.3.4.1.1.21.1.1 | INTEGER | RO | ||||||||||||||
column · INTEGER · read-only · current xfTermCapacityLicenseRange
| |||||||||||||||||
| CxfTermMaxCapacityRange | 1.3.6.1.4.1.193.81.3.4.1.1.21.1.2 | Integer32 | RO | ||||||||||||||
column · Integer32 · read-only · current TermMaxCapacityRange | |||||||||||||||||
| CxfTermMaxTribCapacityRange | 1.3.6.1.4.1.193.81.3.4.1.1.21.1.3 | Integer32 | RO | ||||||||||||||
column · Integer32 · read-only · current xfTermMaxTribCapacityRange | |||||||||||||||||
| TxfRLPMSDCGainCurrent15mTable | 1.3.6.1.4.1.193.81.3.4.1.1.22 | NA | |||||||||||||||
table · not-accessible · current This table monitors the time spent in each SDC gain value in the current 15 minute period. | |||||||||||||||||
| RxfRLPMSDCGainCurrent15mEntry | 1.3.6.1.4.1.193.81.3.4.1.1.22.1 | NA | |||||||||||||||
| CxfPMSDCGainCurrent15m0005dB | 1.3.6.1.4.1.193.81.3.4.1.1.22.1.1 | PerfCurrentCount | RO | ||||||||||||||
column · PerfCurrentCount · read-only · current The number of seconds the SDC gain has been in the range: (0.0 <= SdcGain < 0.5) dB. | |||||||||||||||||
| CxfPMSDCGainCurrent15m0510dB | 1.3.6.1.4.1.193.81.3.4.1.1.22.1.2 | PerfCurrentCount | RO | ||||||||||||||
column · PerfCurrentCount · read-only · current The number of seconds the SDC gain has been in the range: (0.5 <= SdcGain < 1.0) dB. | |||||||||||||||||
| CxfPMSDCGainCurrent15m1015dB | 1.3.6.1.4.1.193.81.3.4.1.1.22.1.3 | PerfCurrentCount | RO | ||||||||||||||
column · PerfCurrentCount · read-only · current The number of seconds the SDC gain has been in the range: (1.0 <= SdcGain < 1.5) dB. | |||||||||||||||||
| CxfPMSDCGainCurrent15m1520dB | 1.3.6.1.4.1.193.81.3.4.1.1.22.1.4 | PerfCurrentCount | RO | ||||||||||||||
column · PerfCurrentCount · read-only · current The number of seconds the SDC gain has been in the range: (1.5 <= SdcGain < 2.0) dB. | |||||||||||||||||
| CxfPMSDCGainCurrent15m2025dB | 1.3.6.1.4.1.193.81.3.4.1.1.22.1.5 | PerfCurrentCount | RO | ||||||||||||||
column · PerfCurrentCount · read-only · current The number of seconds the SDC gain has been in the range: (2.0 <= SdcGain < 2.5) dB. | |||||||||||||||||
| CxfPMSDCGainCurrent15m2530dB | 1.3.6.1.4.1.193.81.3.4.1.1.22.1.6 | PerfCurrentCount | RO | ||||||||||||||
column · PerfCurrentCount · read-only · current The number of seconds the SDC gain has been in the range: (2.5 <= SdcGain < 3.0) dB. | |||||||||||||||||
| TxfRLPMSDCGainInterval15mTable | 1.3.6.1.4.1.193.81.3.4.1.1.23 | NA | |||||||||||||||
table · not-accessible · current This table collects the time spent in each SDC gain value for the 15 minute intervals. | |||||||||||||||||
| RxfRLPMSDCGainInterval15mEntry | 1.3.6.1.4.1.193.81.3.4.1.1.23.1 | NA | |||||||||||||||
row · not-accessible · current Entry in xfRLPMSDCGainInterval15mTable. | |||||||||||||||||
| CxfPMSDCGainInterval15mIntervalNumber | 1.3.6.1.4.1.193.81.3.4.1.1.23.1.1 | Integer32 (1..96) | RO | ||||||||||||||
column · Integer32 (1..96) · read-only · current A number between 1 and 96, which identifies the interval for which the set of statistics is available. The interval identified by 1 is the most recently completed 15 minute interval, and the interval identified by N is the interval immediately preceding the one identified by N-1. | |||||||||||||||||
| CxfPMSDCGainInterval15m0005dB | 1.3.6.1.4.1.193.81.3.4.1.1.23.1.2 | PerfIntervalCount | RO | ||||||||||||||
column · PerfIntervalCount · read-only · current The number of seconds the SDC gain has been in the range: (0.0 <= SdcGain < 0.5) dB. | |||||||||||||||||
| CxfPMSDCGainInterval15m0510dB | 1.3.6.1.4.1.193.81.3.4.1.1.23.1.3 | PerfIntervalCount | RO | ||||||||||||||
column · PerfIntervalCount · read-only · current The number of seconds the SDC gain has been in the range: (0.5 <= SdcGain < 1.0) dB. | |||||||||||||||||
| CxfPMSDCGainInterval15m1015dB | 1.3.6.1.4.1.193.81.3.4.1.1.23.1.4 | PerfIntervalCount | RO | ||||||||||||||
column · PerfIntervalCount · read-only · current The number of seconds the SDC gain has been in the range: (1.0 <= SdcGain < 1.5) dB. | |||||||||||||||||
| CxfPMSDCGainInterval15m1520dB | 1.3.6.1.4.1.193.81.3.4.1.1.23.1.5 | PerfIntervalCount | RO | ||||||||||||||
column · PerfIntervalCount · read-only · current The number of seconds the SDC gain has been in the range: (1.5 <= SdcGain < 2.0) dB. | |||||||||||||||||
| CxfPMSDCGainInterval15m2025dB | 1.3.6.1.4.1.193.81.3.4.1.1.23.1.6 | PerfIntervalCount | RO | ||||||||||||||
column · PerfIntervalCount · read-only · current The number of seconds the SDC gain has been in the range: (2.0 <= SdcGain < 2.5) dB. | |||||||||||||||||
| CxfPMSDCGainInterval15m2530dB | 1.3.6.1.4.1.193.81.3.4.1.1.23.1.7 | PerfIntervalCount | RO | ||||||||||||||
column · PerfIntervalCount · read-only · current The number of seconds the SDC gain has been in the range: (2.5 <= SdcGain < 3.0) dB. | |||||||||||||||||
| TxfRLPMSDCGainCurrent24hTable | 1.3.6.1.4.1.193.81.3.4.1.1.24 | NA | |||||||||||||||
table · not-accessible · current This table monitors the time spent in each SDC gain value in the current 24 hours period. | |||||||||||||||||
| RxfRLPMSDCGainCurrent24hEntry | 1.3.6.1.4.1.193.81.3.4.1.1.24.1 | NA | |||||||||||||||
| CxfPMSDCGainCurrent24h0005dB | 1.3.6.1.4.1.193.81.3.4.1.1.24.1.1 | PerfCurrentCount | RO | ||||||||||||||
column · PerfCurrentCount · read-only · current The number of seconds the SDC gain has been in the range: (0.0 <= SdcGain < 0.5) dB. | |||||||||||||||||
| CxfPMSDCGainCurrent24h0510dB | 1.3.6.1.4.1.193.81.3.4.1.1.24.1.2 | PerfCurrentCount | RO | ||||||||||||||
column · PerfCurrentCount · read-only · current The number of seconds the SDC gain has been in the range: (0.5 <= SdcGain < 1.0) dB. | |||||||||||||||||
| CxfPMSDCGainCurrent24h1015dB | 1.3.6.1.4.1.193.81.3.4.1.1.24.1.3 | PerfCurrentCount | RO | ||||||||||||||
column · PerfCurrentCount · read-only · current The number of seconds the SDC gain has been in the range: (1.0 <= SdcGain < 1.5) dB. | |||||||||||||||||
| CxfPMSDCGainCurrent24h1520dB | 1.3.6.1.4.1.193.81.3.4.1.1.24.1.4 | PerfCurrentCount | RO | ||||||||||||||
column · PerfCurrentCount · read-only · current The number of seconds the SDC gain has been in the range: (1.5 <= SdcGain < 2.0) dB. | |||||||||||||||||
| CxfPMSDCGainCurrent24h2025dB | 1.3.6.1.4.1.193.81.3.4.1.1.24.1.5 | PerfCurrentCount | RO | ||||||||||||||
column · PerfCurrentCount · read-only · current The number of seconds the SDC gain has been in the range: (2.0 <= SdcGain < 2.5) dB. | |||||||||||||||||
| CxfPMSDCGainCurrent24h2530dB | 1.3.6.1.4.1.193.81.3.4.1.1.24.1.6 | PerfCurrentCount | RO | ||||||||||||||
column · PerfCurrentCount · read-only · current The number of seconds the SDC gain has been in the range: (2.5 <= SdcGain < 3.0) dB. | |||||||||||||||||
| TxfRLPMSDCGainInterval24hTable | 1.3.6.1.4.1.193.81.3.4.1.1.25 | NA | |||||||||||||||
table · not-accessible · current This table collects the time spent in each SDC gain value for the 24 hours interval. | |||||||||||||||||
| RxfRLPMSDCGainInterval24hEntry | 1.3.6.1.4.1.193.81.3.4.1.1.25.1 | NA | |||||||||||||||
| CxfPMSDCGainInterval24h0005dB | 1.3.6.1.4.1.193.81.3.4.1.1.25.1.1 | PerfIntervalCount | RO | ||||||||||||||
column · PerfIntervalCount · read-only · current The number of seconds the SDC gain has been in the range: (0.0 <= SdcGain < 0.5) dB. | |||||||||||||||||
| CxfPMSDCGainInterval24h0510dB | 1.3.6.1.4.1.193.81.3.4.1.1.25.1.2 | PerfIntervalCount | RO | ||||||||||||||
column · PerfIntervalCount · read-only · current The number of seconds the SDC gain has been in the range: (0.5 <= SdcGain < 1.0) dB. | |||||||||||||||||
| CxfPMSDCGainInterval24h1015dB | 1.3.6.1.4.1.193.81.3.4.1.1.25.1.3 | PerfIntervalCount | RO | ||||||||||||||
column · PerfIntervalCount · read-only · current The number of seconds the SDC gain has been in the range: (1.0 <= SdcGain < 1.5) dB. | |||||||||||||||||
| CxfPMSDCGainInterval24h1520dB | 1.3.6.1.4.1.193.81.3.4.1.1.25.1.4 | PerfIntervalCount | RO | ||||||||||||||
column · PerfIntervalCount · read-only · current The number of seconds the SDC gain has been in the range: (1.5 <= SdcGain < 2.0) dB. | |||||||||||||||||
| CxfPMSDCGainInterval24h2025dB | 1.3.6.1.4.1.193.81.3.4.1.1.25.1.5 | PerfIntervalCount | RO | ||||||||||||||
column · PerfIntervalCount · read-only · current The number of seconds the SDC gain has been in the range: (2.0 <= SdcGain < 2.5) dB. | |||||||||||||||||
| CxfPMSDCGainInterval24h2530dB | 1.3.6.1.4.1.193.81.3.4.1.1.25.1.6 | PerfIntervalCount | RO | ||||||||||||||
column · PerfIntervalCount · read-only · current The number of seconds the SDC gain has been in the range: (2.5 <= SdcGain < 3.0) dB. | |||||||||||||||||
| TxfRLPMSDCGainConfigTable | 1.3.6.1.4.1.193.81.3.4.1.1.26 | NA | |||||||||||||||
table · not-accessible · current xfRLPMSDCGainConfigTable contains thresholds for setting and resetting alarms for SDC Gain PM data in SDC current and interval tables. | |||||||||||||||||
| RxfRLPMSDCGainConfigEntry | 1.3.6.1.4.1.193.81.3.4.1.1.26.1 | NA | |||||||||||||||
| CxfPMSDCGainSetThreshold15m | 1.3.6.1.4.1.193.81.3.4.1.1.26.1.1 | Integer32 | RW | ||||||||||||||
column · Integer32 · read-write · current The 15 minute set threshold for the lowest SDC Gain interval: 0 - 0.5 dB. Default value is 180. | |||||||||||||||||
| CxfPMSDCGainSetThreshold24h | 1.3.6.1.4.1.193.81.3.4.1.1.26.1.2 | Integer32 | RW | ||||||||||||||
column · Integer32 · read-write · current The 24 hour set threshold for the lowest SDC Gain interval: 0 - 0.5 dB. Default value is 1500. | |||||||||||||||||
| CxfPMSDCGainResetThreshold15m | 1.3.6.1.4.1.193.81.3.4.1.1.26.1.3 | Integer32 | RW | ||||||||||||||
column · Integer32 · read-write · current The 15 minute reset threshold for the lowest SDC Gain interval: 0 - 0.5 dB. Default value is 20. | |||||||||||||||||
| CxfPMSDCGainStatus | 1.3.6.1.4.1.193.81.3.4.1.1.26.1.4 | Bits | RO | ||||||||||||||
column · Bits · read-only · current Threshold crossing SDC alarm status.
| |||||||||||||||||
| TxfRLExtRFPMConfigTable | 1.3.6.1.4.1.193.81.3.4.1.1.27 | NA | |||||||||||||||
table · not-accessible · current This table contains the alarm threshold values for RL Extended RF PM. Its index id the RF IF ifIndex. | |||||||||||||||||
| RxfRLExtRFPMConfigEntry | 1.3.6.1.4.1.193.81.3.4.1.1.27.1 | NA | |||||||||||||||
| CxfExtRFPMRLTS1Threshold | 1.3.6.1.4.1.193.81.3.4.1.1.27.1.1 | Integer32 (-999..-201) | RW | ||||||||||||||
column · Integer32 (-999..-201) · read-write · current RLTS1 Alarm Threshold for Minimum RF Input Power. RF input level = value/10 dBm. Domain: [-99.9 ... -20.1 dBm] Valid for both 15 m & 24 h intervals. If changed current interval PM data must be reset. Always less than RLTS2, xfExtRFPMRLTS2Threshold. | |||||||||||||||||
| CxfExtRFPMSetThreshold15mRLTS1 | 1.3.6.1.4.1.193.81.3.4.1.1.27.1.2 | Integer32 (1..900) | RW | ||||||||||||||
column · Integer32 (1..900) · read-write · current Received Level 1 Threshold Second (RLTS1) 15 minute. Alarm Set threshold in number of seconds that RF Input Power are allowed below the RLTS1 Alarm Threshold for Minimum RF Input Power in current 15 minute interval. Always greater than alarm Reset, xfExtRFPMResetThreshold15mRLTS1. | |||||||||||||||||
| CxfExtRFPMResetThreshold15mRLTS1 | 1.3.6.1.4.1.193.81.3.4.1.1.27.1.3 | Integer32 (1..900) | RW | ||||||||||||||
column · Integer32 (1..900) · read-write · current Received Level 1 Threshold Second (RLTS1) 15 minute. Alarm Reset threshold in number of seconds that RF Input Power are allowed below the RLTS1 Alarm Threshold for Minimum RF Input Power for entire current 15 minute interval. Always less than alarm Set, xfPMSetThreshold15mRLTS1. | |||||||||||||||||
| CxfExtRFPMRLTS2Threshold | 1.3.6.1.4.1.193.81.3.4.1.1.27.1.4 | Integer32 (-998..-200) | RW | ||||||||||||||
column · Integer32 (-998..-200) · read-write · current RLTS2 Alarm Threshold for Minimum RF Input Power. RF input level = value/10 dBm. Domain: [-99.8 ... -20.0 dBm] Valid for both 15 m & 24 h intervals. If changed current interval PM data must be reset. Always greater than RLTS1, xfExtRFPMRLTS1Threshold. | |||||||||||||||||
| CxfExtRFPMSetThreshold15mRLTS2 | 1.3.6.1.4.1.193.81.3.4.1.1.27.1.5 | Integer32 (1..900) | RW | ||||||||||||||
column · Integer32 (1..900) · read-write · current Received Level 2 Threshold Second (RLTS2) 15 minute. Alarm Set threshold in number of seconds that RF Input Power are allowed below the RLTS2 Alarm Threshold for Minimum RF Input Power in current 15 minute interval. Always greater or equal to alarm Reset, xfExtRFPMResetThreshold15mRLTS2. | |||||||||||||||||
| CxfExtRFPMResetThreshold15mRLTS2 | 1.3.6.1.4.1.193.81.3.4.1.1.27.1.6 | Integer32 (1..900) | RW | ||||||||||||||
column · Integer32 (1..900) · read-write · current Received Level 2 Threshold Second (RLTS2) 15 minute. Alarm Reset threshold in number of seconds that RF Input Power are allowed below the RLTS2 Alarm Threshold for Minimum RF Input Power for entire current 15 minute interval. Always less or equal to alarm Set, xfExtRFPMSetThreshold15mRLTS2. | |||||||||||||||||
| CxfExtRFPMSetThreshold15mRLTM | 1.3.6.1.4.1.193.81.3.4.1.1.27.1.7 | Integer32 (10..800) | RW | ||||||||||||||
column · Integer32 (10..800) · read-write · current Receive Level Tide Mark (RLTM) 15 minute. Alarm Set threshold for maximum allowed max / min difference of RF Input Power in current 15 minute interval. RF input level = value/10 dB. Domain: [1.0 ... 80.0 dB] Always greater or equal to alarm Reset, xfExtRFPMResetThreshold15mRLTM. | |||||||||||||||||
| CxfExtRFPMResetThreshold15mRLTM | 1.3.6.1.4.1.193.81.3.4.1.1.27.1.8 | Integer32 (10..800) | RW | ||||||||||||||
column · Integer32 (10..800) · read-write · current Receive Level Tide Mark (RLTM) 15 minute. Alarm Reset threshold for maximum allowed max / min difference of RF Input Power for entire current 15 minute interval. RF input level = value/10 dB. Domain: [1.0 ... 80.0 dB] Always less or equal to alarm Set, xfExtRFPMSetThreshold15mRLTM. | |||||||||||||||||
| CxfExtRFPMTLTS1Threshold | 1.3.6.1.4.1.193.81.3.4.1.1.27.1.9 | Integer32 (-100..45) | RW | ||||||||||||||
column · Integer32 (-100..45) · read-write · current TLTS1 Alarm Threshold for Maximum RF Output Power. RF output level = value dBm. Domain: [-100 ... 45 dBm] Valid for both 15 m & 24 h intervals. If changed current interval PM data must be reset. | |||||||||||||||||
| CxfExtRFPMSetThreshold15mTLTS1 | 1.3.6.1.4.1.193.81.3.4.1.1.27.1.10 | Integer32 (1..900) | RW | ||||||||||||||
column · Integer32 (1..900) · read-write · current Transmitted Levels 1 Threshold Second (TLTS1) 15 minute. Alarm Set threshold in number of seconds that RF Output Power are allowed above the TLTS1 Alarm Threshold for Maximum RF Output Power in current 15 minute interval. Always greater or equal to alarm Reset, xfExtRFPMResetThreshold15mTLTS1. | |||||||||||||||||
| CxfExtRFPMResetThreshold15mTLTS1 | 1.3.6.1.4.1.193.81.3.4.1.1.27.1.11 | Integer32 (1..900) | RW | ||||||||||||||
column · Integer32 (1..900) · read-write · current Transmitted Levels 1 Threshold Second (TLTS1) 15 minute. Alarm Reset threshold in number of seconds that RF Output Power are allowed above the TLTS1 Alarm Threshold for Maximum RF Output Power for entire current 15 minute interval. Always less or equal to alarm Set, xfExtRFPMSetThreshold15mTLTS1. | |||||||||||||||||
| CxfExtRFPMSetThreshold15mTLTM | 1.3.6.1.4.1.193.81.3.4.1.1.27.1.12 | Integer32 (1..145) | RW | ||||||||||||||
column · Integer32 (1..145) · read-write · current Transmitted Level Tide Mark (TLTM) 15 minute. Alarm Set threshold for maximum allowed max / min difference of RF Output Power in current 15 minute interval. RF output level = value dB. Domain: [1 ... 145 dB] Always greater or equal to alarm Reset, xfExtRFPMResetThreshold15mTLTM. | |||||||||||||||||
| CxfExtRFPMResetThreshold15mTLTM | 1.3.6.1.4.1.193.81.3.4.1.1.27.1.13 | Integer32 (1..145) | RW | ||||||||||||||
column · Integer32 (1..145) · read-write · current Transmitted Level Tide Mark (TLTM) 15 minute. Alarm Reset threshold for maximum allowed max / min difference of RF Output Power for entire current 15 minute interval. RF output level = value dB. Domain: [1 ... 145 dB] Always less or equal to alarm Set, xfExtRFPMSetThreshold15mTLTM. | |||||||||||||||||
| CxfExtRFPMSetThreshold24hRLTS1 | 1.3.6.1.4.1.193.81.3.4.1.1.27.1.14 | Integer32 (1..86400) | RW | ||||||||||||||
column · Integer32 (1..86400) · read-write · current Received Level 1 Threshold Second (RLTS1) 24 hour. Alarm Set / Reset threshold in number of seconds that RF Input Power are allowed below the RLTS1 Alarm Threshold for Minimum RF Input Power in current 24 hour interval. | |||||||||||||||||
| CxfExtRFPMSetThreshold24hRLTS2 | 1.3.6.1.4.1.193.81.3.4.1.1.27.1.15 | Integer32 (1..86400) | RW | ||||||||||||||
column · Integer32 (1..86400) · read-write · current Received Level 2 Threshold Second (RLTS2) 24 hour. Alarm Set / Reset threshold in number of seconds that RF Input Power are allowed below the RLTS2 Alarm Threshold for Minimum RF Input Power in current 24 hour interval. | |||||||||||||||||
| CxfExtRFPMSetThreshold24hRLTM | 1.3.6.1.4.1.193.81.3.4.1.1.27.1.16 | Integer32 (10..800) | RW | ||||||||||||||
column · Integer32 (10..800) · read-write · current Receive Level Tide Mark (RLTM) 24 hour. Alarm Set / Reset threshold for maximum allowed max / min difference of RF Input Power in current 24 hour interval. RF input level = value/10 dB. Domain: [1.0 ... 80.0 dB] | |||||||||||||||||
| CxfExtRFPMSetThreshold24hTLTS1 | 1.3.6.1.4.1.193.81.3.4.1.1.27.1.17 | Integer32 (1..86400) | RW | ||||||||||||||
column · Integer32 (1..86400) · read-write · current Transmitted Levels 1 Threshold Second (TLTS1) 24 hour. Alarm Set / Reset threshold in number of seconds that RF Output Power are allowed above the TLTS1 Alarm Threshold for Maximum RF Output Power in current 24 hour interval. | |||||||||||||||||
| CxfExtRFPMSetThreshold24hTLTM | 1.3.6.1.4.1.193.81.3.4.1.1.27.1.18 | Integer32 (1..145) | RW | ||||||||||||||
column · Integer32 (1..145) · read-write · current Transmitted Level Tide Mark (TLTM) 24 hour. Alarm Set / Reset threshold for maximum allowed max / min difference of RF Output Power in current 24 hour interval. RF output level = value dB. Domain: [1 ... 145 dB] | |||||||||||||||||
| CxfExtRFPMStatus | 1.3.6.1.4.1.193.81.3.4.1.1.27.1.19 | Bits | RO | ||||||||||||||
column · Bits · read-only · current Threshold alarm status
| |||||||||||||||||
| CxfExtRFPMView | 1.3.6.1.4.1.193.81.3.4.1.1.27.1.20 | INTEGER | RW | ||||||||||||||
column · INTEGER · read-write · current Enable/disable visibility of PM tables. Default value: extPmEnable(1) Near end access: read-write Far end access: No access
| |||||||||||||||||
| TxfRLExtRFPMCurrent24hTable | 1.3.6.1.4.1.193.81.3.4.1.1.28 | NA | |||||||||||||||
table · not-accessible · current Current 24h Extended RF PM table. Its index is RF IF ifIndex | |||||||||||||||||
| RxfRLExtRFPMCurrent24hEntry | 1.3.6.1.4.1.193.81.3.4.1.1.28.1 | NA | |||||||||||||||
| CxfExtRFPMCurrent24hElapsedTime | 1.3.6.1.4.1.193.81.3.4.1.1.28.1.1 | Counter32 | RO | ||||||||||||||
column · Counter32 · read-only · current The number of seconds that have elapsed since the beginning of the current error-measurement period. If the current interval exceeds the maximum value, the agent will return the maximum value. | |||||||||||||||||
| CxfExtRFPMCurrent24hRLTS1 | 1.3.6.1.4.1.193.81.3.4.1.1.28.1.2 | Integer32 (-1 | 0..86400) | RO | ||||||||||||||
column · Integer32 (-1 | 0..86400) · read-only · current Received Level 1 Threshold Second (RLTS1) 24 hour. Number of seconds that the RF Input Power was below the RLTS1 in the current 24 hour interval. -1 indicates invalid value. The instances are reset by: * xfTermPerfReset in xfRLPtpTerminalPerformanceTable for MMU2 X / MMU3 X * xfPMPerfReset in xfRLPMContinuousCounterTable for MMU4 / MMU1002 | |||||||||||||||||
| CxfExtRFPMCurrent24hRLTS2 | 1.3.6.1.4.1.193.81.3.4.1.1.28.1.3 | Integer32 (-1 | 0..86400) | RO | ||||||||||||||
column · Integer32 (-1 | 0..86400) · read-only · current Received Level 2 Threshold Second (RLTS2) 24 hour. Number of seconds that the RF Input Power was below the RLTS2 in the current 24 hour interval. -1 indicates invalid value. The instances are reset by: * xfTermPerfReset in xfRLPtpTerminalPerformanceTable for MMU2 X / MMU3 X * xfPMPerfReset in xfRLPMContinuousCounterTable for MMU4 / MMU1002 | |||||||||||||||||
| CxfExtRFPMCurrent24hRLMin | 1.3.6.1.4.1.193.81.3.4.1.1.28.1.4 | Integer32 (-999..-200 | 0) | RO | ||||||||||||||
column · Integer32 (-999..-200 | 0) · read-only · current Indicate Min RF Input level in current 24 hour interval. RF input level = value/10 dBm. Domain: [-99.9 ... -20.0 dBm] 0 (zero) indicates invalid value. The instances are reset by: * xfTermPerfReset in xfRLPtpTerminalPerformanceTable for MMU2 X / MMU3 X * xfPMPerfReset in xfRLPMContinuousCounterTable for MMU4 / MMU1002 | |||||||||||||||||
| CxfExtRFPMCurrent24hRLMax | 1.3.6.1.4.1.193.81.3.4.1.1.28.1.5 | Integer32 (-999..-200 | 0) | RO | ||||||||||||||
column · Integer32 (-999..-200 | 0) · read-only · current Indicate Max RF Input level in current 24 hour interval. RF input level = value/10 dBm. Domain: [-99.9 ... -20.0 dBm] 0 (zero) indicates invalid value. The instances are reset by: * xfTermPerfReset in xfRLPtpTerminalPerformanceTable for MMU2 X / MMU3 X * xfPMPerfReset in xfRLPMContinuousCounterTable for MMU4 / MMU1002 | |||||||||||||||||
| CxfExtRFPMCurrent24hTLTS1 | 1.3.6.1.4.1.193.81.3.4.1.1.28.1.6 | Integer32 (-1 | 0..86400) | RO | ||||||||||||||
column · Integer32 (-1 | 0..86400) · read-only · current Transmitted Level 1 Threshold Second (TLTS1) 24 hour. Number of seconds that the RF Output Power was above the TLTS1 in the current 24 hour interval -1 indicates invalid value. The instances are reset by: * xfTermPerfReset in xfRLPtpTerminalPerformanceTable for MMU2 X / MMU3 X * xfPMPerfReset in xfRLPMContinuousCounterTable for MMU4 / MMU1002 | |||||||||||||||||
| CxfExtRFPMCurrent24hTLMin | 1.3.6.1.4.1.193.81.3.4.1.1.28.1.7 | Integer32 (-100..45 | 255) | RO | ||||||||||||||
column · Integer32 (-100..45 | 255) · read-only · current Indicate Min RF Output level in current 24 hour interval. RF output level = value dBm. Domain: [-100 ... 45 dBm] 255 indicates invalid value. The instances are reset by: * xfTermPerfReset in xfRLPtpTerminalPerformanceTable for MMU2 X / MMU3 X * xfPMPerfReset in xfRLPMContinuousCounterTable for MMU4 / MMU1002 | |||||||||||||||||
| CxfExtRFPMCurrent24hTLMax | 1.3.6.1.4.1.193.81.3.4.1.1.28.1.8 | Integer32 (-100..45 | 255) | RO | ||||||||||||||
column · Integer32 (-100..45 | 255) · read-only · current Indicate Max RF Output level in current 24 hour interval. RF output level = value dBm. Domain: [-100 ... 45 dBm] 255 indicates invalid value. The instances are reset by: * xfTermPerfReset in xfRLPtpTerminalPerformanceTable for MMU2 X / MMU3 X * xfPMPerfReset in xfRLPMContinuousCounterTable for MMU4 / MMU1002 | |||||||||||||||||
| TxfRLExtRFPMInterval24hTable | 1.3.6.1.4.1.193.81.3.4.1.1.29 | NA | |||||||||||||||
table · not-accessible · current Interval 24h Extended RF PM table. Its index is RF IF ifIndex | |||||||||||||||||
| RxfRLExtRFPMInterval24hEntry | 1.3.6.1.4.1.193.81.3.4.1.1.29.1 | NA | |||||||||||||||
| CxfExtRFPMInterval24hRLTS1 | 1.3.6.1.4.1.193.81.3.4.1.1.29.1.1 | Integer32 (-1 | 0..86400) | RO | ||||||||||||||
column · Integer32 (-1 | 0..86400) · read-only · current Received Level 1 Threshold Second (RLTS1) 24 hour. Number of seconds that the RF Input Power was below the RLTS1 in the previous 24 hour interval. -1 indicates invalid value. The instances are reset by: * xfTermPerfReset in xfRLPtpTerminalPerformanceTable for MMU2 X / MMU3 X * xfPMPerfReset in xfRLPMContinuousCounterTable for MMU4 / MMU1002 | |||||||||||||||||
| CxfExtRFPMInterval24hRLTS2 | 1.3.6.1.4.1.193.81.3.4.1.1.29.1.2 | Integer32 (-1 | 0..86400) | RO | ||||||||||||||
column · Integer32 (-1 | 0..86400) · read-only · current Received Level 2 Threshold Second (RLTS2) 24 hour. Number of seconds that the RF Input Power was below the RLTS2 in the previous 24 hour interval. -1 indicates invalid value. The instances are reset by: * xfTermPerfReset in xfRLPtpTerminalPerformanceTable for MMU2 X / MMU3 X * xfPMPerfReset in xfRLPMContinuousCounterTable for MMU4 / MMU1002 | |||||||||||||||||
| CxfExtRFPMInterval24hRLMin | 1.3.6.1.4.1.193.81.3.4.1.1.29.1.3 | Integer32 (-999..-200 | 0) | RO | ||||||||||||||
column · Integer32 (-999..-200 | 0) · read-only · current Indicate Min RF Input level in previous 24 hour interval. RF input level = value/10 dBm. Domain: [-99.9 ... -20.0 dBm] 0 (zero) indicates invalid value. The instances are reset by: * xfTermPerfReset in xfRLPtpTerminalPerformanceTable for MMU2 X / MMU3 X * xfPMPerfReset in xfRLPMContinuousCounterTable for MMU4 / MMU1002 | |||||||||||||||||
| CxfExtRFPMInterval24hRLMax | 1.3.6.1.4.1.193.81.3.4.1.1.29.1.4 | Integer32 (-999..-200 | 0) | RO | ||||||||||||||
column · Integer32 (-999..-200 | 0) · read-only · current Indicate Max RF Input level in previous 24 hour interval. RF input level = value/10 dBm. Domain: [-99.9 ... -20.0 dBm] 0 (zero) indicates invalid value. The instances are reset by: * xfTermPerfReset in xfRLPtpTerminalPerformanceTable for MMU2 X / MMU3 X * xfPMPerfReset in xfRLPMContinuousCounterTable for MMU4 / MMU1002 | |||||||||||||||||
| CxfExtRFPMInterval24hTLTS1 | 1.3.6.1.4.1.193.81.3.4.1.1.29.1.5 | Integer32 (-1 | 0..86400) | RO | ||||||||||||||
column · Integer32 (-1 | 0..86400) · read-only · current Transmitted Level 1 Threshold Second (TLTS1) 24 hour. Number of seconds that the RF Output Power was above the TLTS1 in the previous 24 hour interval -1 indicates invalid value. The instances are reset by: * xfTermPerfReset in xfRLPtpTerminalPerformanceTable for MMU2 X / MMU3 X * xfPMPerfReset in xfRLPMContinuousCounterTable for MMU4 / MMU1002 | |||||||||||||||||
| CxfExtRFPMInterval24hTLMin | 1.3.6.1.4.1.193.81.3.4.1.1.29.1.6 | Integer32 (-100..45 | 255) | RO | ||||||||||||||
column · Integer32 (-100..45 | 255) · read-only · current Indicate Min RF Output level in previous 24 hour interval. RF output level = value dBm. Domain: [-100 ... 45 dBm] 255 indicates invalid value. The instances are reset by: * xfTermPerfReset in xfRLPtpTerminalPerformanceTable for MMU2 X / MMU3 X * xfPMPerfReset in xfRLPMContinuousCounterTable for MMU4 / MMU1002 | |||||||||||||||||
| CxfExtRFPMInterval24hTLMax | 1.3.6.1.4.1.193.81.3.4.1.1.29.1.7 | Integer32 (-100..45 | 255) | RO | ||||||||||||||
column · Integer32 (-100..45 | 255) · read-only · current Indicate Max RF Output level in previous 24 hour interval. RF output level = value dBm. Domain: [-100 ... 45 dBm] 255 indicates invalid value. The instances are reset by: * xfTermPerfReset in xfRLPtpTerminalPerformanceTable for MMU2 X / MMU3 X * xfPMPerfReset in xfRLPMContinuousCounterTable for MMU4 / MMU1002 | |||||||||||||||||
| CxfExtRFPMInterval24hValidData | 1.3.6.1.4.1.193.81.3.4.1.1.29.1.8 | TruthValue | RO | ||||||||||||||
column · TruthValue · read-only · current This variable indicates whether the data for this interval is valid. | |||||||||||||||||
| TxfRLExtRFPMCurrent15mTable | 1.3.6.1.4.1.193.81.3.4.1.1.30 | NA | |||||||||||||||
table · not-accessible · current Current 15m Extended RF PM table. Its index is RF IF ifIndex | |||||||||||||||||
| RxfRLExtRFPMCurrent15mEntry | 1.3.6.1.4.1.193.81.3.4.1.1.30.1 | NA | |||||||||||||||
| CxfExtRFPMCurrent15mElapsedTime | 1.3.6.1.4.1.193.81.3.4.1.1.30.1.1 | Counter32 | RO | ||||||||||||||
column · Counter32 · read-only · current The number of seconds that have elapsed since the beginning of the current error-measurement period. | |||||||||||||||||
| CxfExtRFPMCurrent15mRLTS1 | 1.3.6.1.4.1.193.81.3.4.1.1.30.1.2 | Integer32 (-1 | 0..900) | RO | ||||||||||||||
column · Integer32 (-1 | 0..900) · read-only · current Received Level 1 Threshold Second (RLTS1) 15 minute Number of seconds that the RF Input Power was below the RLTS1 in the current 15 minute interval. -1 indicates invalid value. The instances are reset by: * xfTermPerfReset in xfRLPtpTerminalPerformanceTable for MMU2 X / MMU3 X * xfPMPerfReset in xfRLPMContinuousCounterTable for MMU4 / MMU1002 | |||||||||||||||||
| CxfExtRFPMCurrent15mRLTS2 | 1.3.6.1.4.1.193.81.3.4.1.1.30.1.3 | Integer32 (-1 | 0..900) | RO | ||||||||||||||
column · Integer32 (-1 | 0..900) · read-only · current Received Level 2 Threshold Second (RLTS2) 15 minute Number of seconds that the RF Input Power was below the RLTS2 in the current 15 minute interval. -1 indicates invalid value. The instances are reset by: * xfTermPerfReset in xfRLPtpTerminalPerformanceTable for MMU2 X / MMU3 X * xfPMPerfReset in xfRLPMContinuousCounterTable for MMU4 / MMU1002 | |||||||||||||||||
| CxfExtRFPMCurrent15mRLMin | 1.3.6.1.4.1.193.81.3.4.1.1.30.1.4 | Integer32 (-999..-200 | 0) | RO | ||||||||||||||
column · Integer32 (-999..-200 | 0) · read-only · current Indicate Min RF Input level in current 15 minute interval. RF input level = value/10 dBm. Domain: [-99.9 ... -20.0 dBm] 0 (zero) indicates invalid value. The instances are reset by: * xfTermPerfReset in xfRLPtpTerminalPerformanceTable for MMU2 X / MMU3 X * xfPMPerfReset in xfRLPMContinuousCounterTable for MMU4 / MMU1002 | |||||||||||||||||
| CxfExtRFPMCurrent15mRLMax | 1.3.6.1.4.1.193.81.3.4.1.1.30.1.5 | Integer32 (-999..-200 | 0) | RO | ||||||||||||||
column · Integer32 (-999..-200 | 0) · read-only · current Indicate Max RF Input level in current 15 minute interval. RF input level = value/10 dBm. Domain: [-99.9 ... -20.0 dBm] 0 (zero) indicates invalid value. The instances are reset by: * xfTermPerfReset in xfRLPtpTerminalPerformanceTable for MMU2 X / MMU3 X * xfPMPerfReset in xfRLPMContinuousCounterTable for MMU4 / MMU1002 | |||||||||||||||||
| CxfExtRFPMCurrent15mTLTS1 | 1.3.6.1.4.1.193.81.3.4.1.1.30.1.6 | Integer32 (-1 | 0..900) | RO | ||||||||||||||
column · Integer32 (-1 | 0..900) · read-only · current Transmitted Level 1 Threshold Second (TLTS1) 15 minute Number of seconds that the RF Output Power was above the TLTS1 in the current 15 minute interval -1 indicates invalid value. The instances are reset by: * xfTermPerfReset in xfRLPtpTerminalPerformanceTable for MMU2 X / MMU3 X * xfPMPerfReset in xfRLPMContinuousCounterTable for MMU4 / MMU1002 | |||||||||||||||||
| CxfExtRFPMCurrent15mTLMin | 1.3.6.1.4.1.193.81.3.4.1.1.30.1.7 | Integer32 (-100..45 | 255) | RO | ||||||||||||||
column · Integer32 (-100..45 | 255) · read-only · current Indicate Min RF Output level in current 15 minute interval. RF output level = value dBm. Domain: [-100 ... 45 dBm] 255 indicates invalid value. The instances are reset by: * xfTermPerfReset in xfRLPtpTerminalPerformanceTable for MMU2 X / MMU3 X * xfPMPerfReset in xfRLPMContinuousCounterTable for MMU4 / MMU1002 | |||||||||||||||||
| CxfExtRFPMCurrent15mTLMax | 1.3.6.1.4.1.193.81.3.4.1.1.30.1.8 | Integer32 (-100..45 | 255) | RO | ||||||||||||||
column · Integer32 (-100..45 | 255) · read-only · current Indicate Max RF Output level in current 15 minute interval. RF output level = value dBm. Domain: [-100 ... 45 dBm] 255 indicates invalid value. The instances are reset by: * xfTermPerfReset in xfRLPtpTerminalPerformanceTable for MMU2 X / MMU3 X * xfPMPerfReset in xfRLPMContinuousCounterTable for MMU4 / MMU1002 | |||||||||||||||||
| TxfRLExtRFPMInterval15mTable | 1.3.6.1.4.1.193.81.3.4.1.1.31 | NA | |||||||||||||||
table · not-accessible · current Interval 15m Extended RF PM table. Its index is RF IF ifIndex | |||||||||||||||||
| RxfRLExtRFPMInterval15mEntry | 1.3.6.1.4.1.193.81.3.4.1.1.31.1 | NA | |||||||||||||||
| CxfExtRFPMInterval15mIntervalNumber | 1.3.6.1.4.1.193.81.3.4.1.1.31.1.1 | Integer32 (1..96) | RO | ||||||||||||||
column · Integer32 (1..96) · read-only · current A number between 1 and 96, which identifies the interval for which the set of statistics is available. The interval identified by 1 is the most recently completed 15 minute interval, and the interval identified by N is the interval immediately preceding the one identified by N-1. | |||||||||||||||||
| CxfExtRFPMInterval15mRLTS1 | 1.3.6.1.4.1.193.81.3.4.1.1.31.1.2 | Integer32 (-1 | 0..900) | RO | ||||||||||||||
column · Integer32 (-1 | 0..900) · read-only · current Received Level 1 Threshold Second (RLTS1) 15 minute Number of seconds that the RF Input Power was below the RLTS1 in the previous 15 minute interval. -1 indicates invalid value. The instances are reset by: * xfTermPerfReset in xfRLPtpTerminalPerformanceTable for MMU2 X / MMU3 X * xfPMPerfReset in xfRLPMContinuousCounterTable for MMU4 / MMU1002 | |||||||||||||||||
| CxfExtRFPMInterval15mRLTS2 | 1.3.6.1.4.1.193.81.3.4.1.1.31.1.3 | Integer32 (-1 | 0..900) | RO | ||||||||||||||
column · Integer32 (-1 | 0..900) · read-only · current Received Level 2 Threshold Second (RLTS2) 15 minute Number of seconds that the RF Input Power was below the RLTS2 in the previous 15 minute interval. -1 indicates invalid value. The instances are reset by: * xfTermPerfReset in xfRLPtpTerminalPerformanceTable for MMU2 X / MMU3 X * xfPMPerfReset in xfRLPMContinuousCounterTable for MMU4 / MMU1002 | |||||||||||||||||
| CxfExtRFPMInterval15mRLMin | 1.3.6.1.4.1.193.81.3.4.1.1.31.1.4 | Integer32 (-999..-200 | 0) | RO | ||||||||||||||
column · Integer32 (-999..-200 | 0) · read-only · current Indicate Min RF Input level in previous 15 minute interval. RF input level = value/10 dBm. Domain: [-99.9 ... -20.0 dBm] 0 (zero) indicates invalid value. The instances are reset by: * xfTermPerfReset in xfRLPtpTerminalPerformanceTable for MMU2 X / MMU3 X * xfPMPerfReset in xfRLPMContinuousCounterTable for MMU4 / MMU1002 | |||||||||||||||||
| CxfExtRFPMInterval15mRLMax | 1.3.6.1.4.1.193.81.3.4.1.1.31.1.5 | Integer32 (-999..-200 | 0) | RO | ||||||||||||||
column · Integer32 (-999..-200 | 0) · read-only · current Indicate Max RF Input level in previous 15 minute interval. RF input level = value/10 dBm. Domain: [-99.9 ... -20.0 dBm] 0 (zero) indicates invalid value. The instances are reset by: * xfTermPerfReset in xfRLPtpTerminalPerformanceTable for MMU2 X / MMU3 X * xfPMPerfReset in xfRLPMContinuousCounterTable for MMU4 / MMU1002 | |||||||||||||||||
| CxfExtRFPMInterval15mTLTS1 | 1.3.6.1.4.1.193.81.3.4.1.1.31.1.6 | Integer32 (-1 | 0..900) | RO | ||||||||||||||
column · Integer32 (-1 | 0..900) · read-only · current Transmitted Level 1 Threshold Second (TLTS1) 15 minute Number of seconds that the RF Output Power was above the TLTS1 in the previous 15 minute interval -1 indicates invalid value. The instances are reset by: * xfTermPerfReset in xfRLPtpTerminalPerformanceTable for MMU2 X / MMU3 X * xfPMPerfReset in xfRLPMContinuousCounterTable for MMU4 / MMU1002 | |||||||||||||||||
| CxfExtRFPMInterval15mTLMin | 1.3.6.1.4.1.193.81.3.4.1.1.31.1.7 | Integer32 (-100..45 | 255) | RO | ||||||||||||||
column · Integer32 (-100..45 | 255) · read-only · current Indicate Min RF Output level in previous 15 minute interval. RF output level = value dBm. Domain: [-100 ... 45 dBm] 255 indicates invalid value. The instances are reset by: * xfTermPerfReset in xfRLPtpTerminalPerformanceTable for MMU2 X / MMU3 X * xfPMPerfReset in xfRLPMContinuousCounterTable for MMU4 / MMU1002 | |||||||||||||||||
| CxfExtRFPMInterval15mTLMax | 1.3.6.1.4.1.193.81.3.4.1.1.31.1.8 | Integer32 (-100..45 | 255) | RO | ||||||||||||||
column · Integer32 (-100..45 | 255) · read-only · current Indicate Max RF Output level in previous 15 minute interval. RF output level = value dBm. Domain: [-100 ... 45 dBm] 255 indicates invalid value. The instances are reset by: * xfTermPerfReset in xfRLPtpTerminalPerformanceTable for MMU2 X / MMU3 X * xfPMPerfReset in xfRLPMContinuousCounterTable for MMU4 / MMU1002 | |||||||||||||||||
| CxfExtRFPMInterval15mValidData | 1.3.6.1.4.1.193.81.3.4.1.1.31.1.9 | TruthValue | RO | ||||||||||||||
column · TruthValue · read-only · current This variable indicates if the data for this interval is valid. | |||||||||||||||||
| TxfRLExtRAUPMCurrent24hTable | 1.3.6.1.4.1.193.81.3.4.1.1.32 | NA | |||||||||||||||
table · not-accessible · current Current 24h Extended RAU PM table. Its index is RAU IF ifIndex | |||||||||||||||||
| RxfRLExtRAUPMCurrent24hEntry | 1.3.6.1.4.1.193.81.3.4.1.1.32.1 | NA | |||||||||||||||
| CxfExtRAUPMCurrent24hElapsedTime | 1.3.6.1.4.1.193.81.3.4.1.1.32.1.1 | Counter32 | RO | ||||||||||||||
column · Counter32 · read-only · current The number of seconds that have elapsed since the beginning of the current error-measurement period. If the current interval exceeds the maximum value, the agent will return the maximum value. | |||||||||||||||||
| CxfExtRAUPMCurrent24hMSEMin | 1.3.6.1.4.1.193.81.3.4.1.1.32.1.2 | Integer32 (-1000..1000 | 2000) | RO | ||||||||||||||
column · Integer32 (-1000..1000 | 2000) · read-only · current Indicate Min MSE level in current 24 hour interval. Input level = value/10 dB. Domain: [-100.0 ... 100.0 dB] 2000 indicates invalid value. The instances are reset by: * xfTermPerfReset in xfRLPtpTerminalPerformanceTable for MMU2 X / MMU3 X * xfPMPerfReset in xfRLPMContinuousCounterTable for MMU4 / MMU1002 | |||||||||||||||||
| CxfExtRAUPMCurrent24hMSEMax | 1.3.6.1.4.1.193.81.3.4.1.1.32.1.3 | Integer32 (-1000..1000 | 2000) | RO | ||||||||||||||
column · Integer32 (-1000..1000 | 2000) · read-only · current Indicate Max MSE level in current 24 hour interval. Input level = value/10 dB. Domain: [-100.0 ... 100.0 dB] 2000 indicates invalid value. The instances are reset by: * xfTermPerfReset in xfRLPtpTerminalPerformanceTable for MMU2 X / MMU3 X * xfPMPerfReset in xfRLPMContinuousCounterTable for MMU4 / MMU1002 | |||||||||||||||||
| CxfExtRAUPMCurrent24hXPIMin | 1.3.6.1.4.1.193.81.3.4.1.1.32.1.4 | Integer32 (-1000..1000 | 2000) | RO | ||||||||||||||
column · Integer32 (-1000..1000 | 2000) · read-only · current Indicate Min Cross-Polar Interference (XPI) level in current 24 hour interval. Input level = value/10 dB. Domain: [-100.0 ... 100.0 dB] 2000 indicates invalid value. The instances are reset by: * xfTermPerfReset in xfRLPtpTerminalPerformanceTable for MMU2 X / MMU3 X * xfPMPerfReset in xfRLPMContinuousCounterTable for MMU4 / MMU1002 | |||||||||||||||||
| CxfExtRAUPMCurrent24hXPIMax | 1.3.6.1.4.1.193.81.3.4.1.1.32.1.5 | Integer32 (-1000..1000 | 2000) | RO | ||||||||||||||
column · Integer32 (-1000..1000 | 2000) · read-only · current Indicate Max Cross-Polar Interference (XPI) level in current 24 hour interval. Input level = value/10 dB. Domain: [-100.0 ... 100.0 dB] 2000 indicates invalid value. The instances are reset by: * xfTermPerfReset in xfRLPtpTerminalPerformanceTable for MMU2 X / MMU3 X * xfPMPerfReset in xfRLPMContinuousCounterTable for MMU4 / MMU1002 | |||||||||||||||||
| TxfRLExtRAUPMInterval24hTable | 1.3.6.1.4.1.193.81.3.4.1.1.33 | NA | |||||||||||||||
table · not-accessible · current Interval 24h Extended RAU PM table. Its index is RAU IF ifIndex | |||||||||||||||||
| RxfRLExtRAUPMInterval24hEntry | 1.3.6.1.4.1.193.81.3.4.1.1.33.1 | NA | |||||||||||||||
| CxfExtRAUPMInterval24hMSEMin | 1.3.6.1.4.1.193.81.3.4.1.1.33.1.1 | Integer32 (-1000..1000 | 2000) | RO | ||||||||||||||
column · Integer32 (-1000..1000 | 2000) · read-only · current Indicate Min MSE level in previous 24 hour interval. Input level = value/10 dB. Domain: [-100.0 ... 100.0 dB] 2000 indicates invalid value. The instances are reset by: * xfTermPerfReset in xfRLPtpTerminalPerformanceTable for MMU2 X / MMU3 X * xfPMPerfReset in xfRLPMContinuousCounterTable for MMU4 / MMU1002 | |||||||||||||||||
| CxfExtRAUPMInterval24hMSEMax | 1.3.6.1.4.1.193.81.3.4.1.1.33.1.2 | Integer32 (-1000..1000 | 2000) | RO | ||||||||||||||
column · Integer32 (-1000..1000 | 2000) · read-only · current Indicate Max MSE level in previous 24 hour interval. Input level = value/10 dB. Domain: [-100.0 ... 100.0 dB] 2000 indicates invalid value. The instances are reset by: * xfTermPerfReset in xfRLPtpTerminalPerformanceTable for MMU2 X / MMU3 X * xfPMPerfReset in xfRLPMContinuousCounterTable for MMU4 / MMU1002 | |||||||||||||||||
| CxfExtRAUPMInterval24hXPIMin | 1.3.6.1.4.1.193.81.3.4.1.1.33.1.3 | Integer32 (-1000..1000 | 2000) | RO | ||||||||||||||
column · Integer32 (-1000..1000 | 2000) · read-only · current Indicate Min Cross-Polar Interference (XPI) level in previous 24 hour interval. Input level = value/10 dB. Domain: [-100.0 ... 100.0 dB] 2000 indicates invalid value. The instances are reset by: * xfTermPerfReset in xfRLPtpTerminalPerformanceTable for MMU2 X / MMU3 X * xfPMPerfReset in xfRLPMContinuousCounterTable for MMU4 / MMU1002 | |||||||||||||||||
| CxfExtRAUPMInterval24hXPIMax | 1.3.6.1.4.1.193.81.3.4.1.1.33.1.4 | Integer32 (-1000..1000 | 2000) | RO | ||||||||||||||
column · Integer32 (-1000..1000 | 2000) · read-only · current Indicate Max Cross-Polar Interference (XPI) level in previous 24 hour interval. Input level = value/10 dB. Domain: [-100.0 ... 100.0 dB] 2000 indicates invalid value. The instances are reset by: * xfTermPerfReset in xfRLPtpTerminalPerformanceTable for MMU2 X / MMU3 X * xfPMPerfReset in xfRLPMContinuousCounterTable for MMU4 / MMU1002 | |||||||||||||||||
| CxfExtRAUPMInterval24hValidData | 1.3.6.1.4.1.193.81.3.4.1.1.33.1.5 | TruthValue | RO | ||||||||||||||
column · TruthValue · read-only · current This variable indicates whether the data for this interval is valid. | |||||||||||||||||
| TxfRLExtRAUPMCurrent15mTable | 1.3.6.1.4.1.193.81.3.4.1.1.34 | NA | |||||||||||||||
table · not-accessible · current Current 15m Extended RAU PM table. Its index is RF IF ifIndex | |||||||||||||||||
| RxfRLExtRAUPMCurrent15mEntry | 1.3.6.1.4.1.193.81.3.4.1.1.34.1 | NA | |||||||||||||||
| CxfExtRAUPMCurrent15mElapsedTime | 1.3.6.1.4.1.193.81.3.4.1.1.34.1.1 | Counter32 | RO | ||||||||||||||
column · Counter32 · read-only · current The number of seconds that have elapsed since the beginning of the current error-measurement period. If the current interval exceeds the maximum value, the agent will return the maximum value. | |||||||||||||||||
| CxfExtRAUPMCurrent15mMSEMin | 1.3.6.1.4.1.193.81.3.4.1.1.34.1.2 | Integer32 (-1000..1000 | 2000) | RO | ||||||||||||||
column · Integer32 (-1000..1000 | 2000) · read-only · current Indicate Min MSE level in current 15 mimute interval. Input level = value/10 dB. Domain: [-100.0 ... 100.0 dB] 2000 indicates invalid value. The instances are reset by: * xfTermPerfReset in xfRLPtpTerminalPerformanceTable for MMU2 X / MMU3 X * xfPMPerfReset in xfRLPMContinuousCounterTable for MMU4 / MMU1002 | |||||||||||||||||
| CxfExtRAUPMCurrent15mMSEMax | 1.3.6.1.4.1.193.81.3.4.1.1.34.1.3 | Integer32 (-1000..1000 | 2000) | RO | ||||||||||||||
column · Integer32 (-1000..1000 | 2000) · read-only · current Indicate Max MSE level in current 15 mimute interval. Input level = value/10 dB. Domain: [-100.0 ... 100.0 dB] 2000 indicates invalid value. The instances are reset by: * xfTermPerfReset in xfRLPtpTerminalPerformanceTable for MMU2 X / MMU3 X * xfPMPerfReset in xfRLPMContinuousCounterTable for MMU4 / MMU1002 | |||||||||||||||||
| CxfExtRAUPMCurrent15mXPIMin | 1.3.6.1.4.1.193.81.3.4.1.1.34.1.4 | Integer32 (-1000..1000 | 2000) | RO | ||||||||||||||
column · Integer32 (-1000..1000 | 2000) · read-only · current Indicate Min Cross-Polar Interference (XPI) level in current 15 mimute interval. Input level = value/10 dB. Domain: [-100.0 ... 100.0 dB] 2000 indicates invalid value. The instances are reset by: * xfTermPerfReset in xfRLPtpTerminalPerformanceTable for MMU2 X / MMU3 X * xfPMPerfReset in xfRLPMContinuousCounterTable for MMU4 / MMU1002 | |||||||||||||||||
| CxfExtRAUPMCurrent15mXPIMax | 1.3.6.1.4.1.193.81.3.4.1.1.34.1.5 | Integer32 (-1000..1000 | 2000) | RO | ||||||||||||||
column · Integer32 (-1000..1000 | 2000) · read-only · current Indicate Max Cross-Polar Interference (XPI) level in current 15 mimute interval. Input level = value/10 dB. Domain: [-100.0 ... 100.0 dB] 2000 indicates invalid value. The instances are reset by: * xfTermPerfReset in xfRLPtpTerminalPerformanceTable for MMU2 X / MMU3 X * xfPMPerfReset in xfRLPMContinuousCounterTable for MMU4 / MMU1002 | |||||||||||||||||
| TxfRLExtRAUPMInterval15mTable | 1.3.6.1.4.1.193.81.3.4.1.1.35 | NA | |||||||||||||||
table · not-accessible · current Interval 15 Extended RAU PM table. Its index is RAU IF ifIndex | |||||||||||||||||
| RxfRLExtRAUPMInterval15mEntry | 1.3.6.1.4.1.193.81.3.4.1.1.35.1 | NA | |||||||||||||||
row · not-accessible · current Entry in the xfRLExtRAUPMInterval15mTable. | |||||||||||||||||
| CxfExtRAUPMInterval15mIntervalNumber | 1.3.6.1.4.1.193.81.3.4.1.1.35.1.1 | Integer32 (1..96) | RO | ||||||||||||||
column · Integer32 (1..96) · read-only · current A number between 1 and 96, which identifies the interval for which the set of statistics is available. The interval identified by 1 is the most recently completed 15 minute interval, and the interval identified by N is the interval immediately preceding the one identified by N-1. | |||||||||||||||||
| CxfExtRAUPMInterval15mMSEMin | 1.3.6.1.4.1.193.81.3.4.1.1.35.1.2 | Integer32 (-1000..1000 | 2000) | RO | ||||||||||||||
column · Integer32 (-1000..1000 | 2000) · read-only · current Indicate Min MSE level in previous 15 minute interval. Input level = value/10 dB. Domain: [-100.0 ... 100.0 dB] 2000 indicates invalid value. The instances are reset by: * xfTermPerfReset in xfRLPtpTerminalPerformanceTable for MMU2 X / MMU3 X * xfPMPerfReset in xfRLPMContinuousCounterTable for MMU4 / MMU1002 | |||||||||||||||||
| CxfExtRAUPMInterval15mMSEMax | 1.3.6.1.4.1.193.81.3.4.1.1.35.1.3 | Integer32 (-1000..1000 | 2000) | RO | ||||||||||||||
column · Integer32 (-1000..1000 | 2000) · read-only · current Indicate Max MSE level in previous 15 minute interval. Input level = value/10 dB. Domain: [-100.0 ... 100.0 dB] 2000 indicates invalid value. The instances are reset by: * xfTermPerfReset in xfRLPtpTerminalPerformanceTable for MMU2 X / MMU3 X * xfPMPerfReset in xfRLPMContinuousCounterTable for MMU4 / MMU1002 | |||||||||||||||||
| CxfExtRAUPMInterval15mXPIMin | 1.3.6.1.4.1.193.81.3.4.1.1.35.1.4 | Integer32 (-1000..1000 | 2000) | RO | ||||||||||||||
column · Integer32 (-1000..1000 | 2000) · read-only · current Indicate Min Cross-Polar Interference (XPI) level in previous 15 minute interval. Input level = value/10 dB. Domain: [-100.0 ... 100.0 dB] 2000 indicates invalid value. The instances are reset by: * xfTermPerfReset in xfRLPtpTerminalPerformanceTable for MMU2 X / MMU3 X * xfPMPerfReset in xfRLPMContinuousCounterTable for MMU4 / MMU1002 | |||||||||||||||||
| CxfExtRAUPMInterval15mXPIMax | 1.3.6.1.4.1.193.81.3.4.1.1.35.1.5 | Integer32 (-1000..1000 | 2000) | RO | ||||||||||||||
column · Integer32 (-1000..1000 | 2000) · read-only · current Indicate Max Cross-Polar Interference (XPI) level in previous 15 minute interval. Input level = value/10 dB. Domain: [-100.0 ... 100.0 dB] 2000 indicates invalid value. The instances are reset by: * xfTermPerfReset in xfRLPtpTerminalPerformanceTable for MMU2 X / MMU3 X * xfPMPerfReset in xfRLPMContinuousCounterTable for MMU4 / MMU1002 | |||||||||||||||||
| CxfExtRAUPMInterval15mValidData | 1.3.6.1.4.1.193.81.3.4.1.1.35.1.6 | TruthValue | RO | ||||||||||||||
column · TruthValue · read-only · current This variable indicates whether the data for this interval is valid. | |||||||||||||||||
| NxfRadioLinkPtpTerminalConformance | 1.3.6.1.4.1.193.81.3.4.1.2 | ||||||||||||||||
| NxfRadioLinkPtpTerminalCompliances | 1.3.6.1.4.1.193.81.3.4.1.2.1 | ||||||||||||||||
| MxfRadioLinkPtpTerminalFullCompliance | 1.3.6.1.4.1.193.81.3.4.1.2.1.1 | ||||||||||||||||
compliance · current The compliance statement for SNMP entities which implement everything. | |||||||||||||||||
| NxfRadioLinkPtpTerminalGroups | 1.3.6.1.4.1.193.81.3.4.1.2.2 | ||||||||||||||||
| GxfRadioLinkPtpTerminalCompleteGroup | 1.3.6.1.4.1.193.81.3.4.1.2.2.1 | ||||||||||||||||
group · current A collection of all current objects in this MIB module.
| |||||||||||||||||
| GxfRadioLinkPtpTerminalObsoleteGroup | 1.3.6.1.4.1.193.81.3.4.1.2.2.2 | obsolete | |||||||||||||||
group · obsolete A collection of all obsolete objects in this MIB module. | |||||||||||||||||
Textual conventions
ChannelModeINTEGERacap(4)accp(3)ccdp(2)other(1)Terminal channel mode
TermAdaptiveManualModeINTEGERdisable(2)enable(3)enabledAsRequest(4)other(1)Adaptive Modulation mode
TermAutoRemoveLoopEnableINTEGERdisable(3)enable(2)other(1)Auto Removal loops
TermModulationINTEGERcqpsk(2)other(1)qam1024(11)qam128(4)qam16(3)qam256(9)qam32(5)qam4(7)qam512(10)qam64(6)qam8(8)Channel Modulation
TermOutputPowerStatusINTEGERatpc(3)localControl(4)other(1)ra1LocalControlRa2Rtpc(5)ra1RtpcRa2LocalControl(6)rtpc(2)Output power mode
TermRauSecINTEGERother(0)sec2(1)sec4(2)sec5b(3)Spectrum Effeciency Class