PT-RADIOLINK-MIB
Ericsson ABThis is the MIB for Radio Link specifics in PT
snmptranslate -m PT-RADIOLINK-MIB -Tpsnmpwalk -v2c -c <community> -m PT-RADIOLINK-MIB <host> 1.3.6.1.4.1.193.223.2.7Imports
| IF-MIB | ifEntry |
|---|---|
| INET-ADDRESS-MIB | InetAddressIPv6 |
| PT-MIB | pt |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | Bits, Counter32, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso |
| SNMPv2-TC | DisplayString, PhysAddress, TEXTUAL-CONVENTION |
OID tree
| Name | OID | Type | Access | Status | Example | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| IptRadioLink | 1.3.6.1.4.1.193.223.2.7 | ||||||||||||
identity This is the MIB for Radio Link specifics in PT | |||||||||||||
| TctTable | 1.3.6.1.4.1.193.223.2.7.1 | NA | |||||||||||
table · not-accessible · current A table of CT Table entries. | |||||||||||||
| RctEntry | 1.3.6.1.4.1.193.223.2.7.1.1 | NA | |||||||||||
| CactualInputPower | 1.3.6.1.4.1.193.223.2.7.1.1.1 | OCTET STRING | RO | -40.5 | |||||||||
column · OCTET STRING · read-only · current Actual input power of the CT in dBm Example values from LibreNMS test devices
| |||||||||||||
| CactualOutputPower | 1.3.6.1.4.1.193.223.2.7.1.1.2 | OCTET STRING | RO | 16.0 | |||||||||
column · OCTET STRING · read-only · current Actual output power of the CT in dBm Example values from LibreNMS test devices
| |||||||||||||
| CactualRxAcm | 1.3.6.1.4.1.193.223.2.7.1.1.3 | OCTET STRING | RO | ||||||||||
column · OCTET STRING · read-only · current Actual rx modulation and coding | |||||||||||||
| CactualTxAcm | 1.3.6.1.4.1.193.223.2.7.1.1.4 | OCTET STRING | RO | ||||||||||
column · OCTET STRING · read-only · current Actual tx modulation and coding | |||||||||||||
| CctDistinguishedName | 1.3.6.1.4.1.193.223.2.7.1.1.5 | OCTET STRING | RO | ||||||||||
column · OCTET STRING · read-only · current Unique id/name of the carrier termination, according to FDN (rack/slot/port/class) | |||||||||||||
| Cdescription | 1.3.6.1.4.1.193.223.2.7.1.1.6 | OCTET STRING | RW | ||||||||||
column · OCTET STRING · read-write · current User description of the carrior termination. | |||||||||||||
| CcarrierId | 1.3.6.1.4.1.193.223.2.7.1.1.7 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Id of the carrier. (A, B, C, D) Used in XPIC & MIMO configurations to check that the carrier termination is connected to the correct far end carrier termination. Should be the same id on both sides of the hop. Defaulted when not MIMO or XPIC. Sometimes also referred to as preamble
| |||||||||||||
| CctStatus | 1.3.6.1.4.1.193.223.2.7.1.1.8 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current The status of the carrier termination, hop
| |||||||||||||
| CframeId | 1.3.6.1.4.1.193.223.2.7.1.1.9 | Integer32 (0..10000) | RW | ||||||||||
column · Integer32 (0..10000) · read-write · current A unique identifier for the radio frame to be used. Wanted frameId, txFrequency, rxFrequency, referenceSec, selectedMinAcm and selectedMaxAcm must be a valid combination. | |||||||||||||
| CtxFrequency | 1.3.6.1.4.1.193.223.2.7.1.1.10 | Integer32 | RW | 86000000 | |||||||||
column · Integer32 · read-write · current Selected frequency on the transmitter (kHz). Wanted frameId, txFrequency, rxFrequency, referenceSec, selectedMinAcm and selectedMaxAcm must be a valid combination. Example values from LibreNMS test devices
| |||||||||||||
| CminTxFrequency | 1.3.6.1.4.1.193.223.2.7.1.1.11 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current Minimum Tx frequency possible to use, given by the selected frame-id | |||||||||||||
| CmaxTxFrequency | 1.3.6.1.4.1.193.223.2.7.1.1.12 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current Maximum Tx frequency possible to use, given by the selected frame-id | |||||||||||||
| CrxFrequency | 1.3.6.1.4.1.193.223.2.7.1.1.13 | Integer32 | RW | 76000000 | |||||||||
column · Integer32 · read-write · current Selected frequency on the receiver (kHz). Wanted frameId, txFrequency, rxFrequency, referenceSec, selectedMinAcm and selectedMaxAcm must be a valid combination. Example values from LibreNMS test devices
| |||||||||||||
| CminRxFrequency | 1.3.6.1.4.1.193.223.2.7.1.1.14 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current Minimum Rx frequency possible to use, given by the selected frame-id | |||||||||||||
| CmaxRxFrequency | 1.3.6.1.4.1.193.223.2.7.1.1.15 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current Maximum Rx frequency possible to use, given by the selected frame-id | |||||||||||||
| CfrequencyStepSize | 1.3.6.1.4.1.193.223.2.7.1.1.16 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current Frequency step size in kHz | |||||||||||||
| CduplexDistance | 1.3.6.1.4.1.193.223.2.7.1.1.17 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current Distance between Tx and Rx frequencies (kHz) | |||||||||||||
| CduplexType | 1.3.6.1.4.1.193.223.2.7.1.1.18 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current The duplex type is given by the equipment (Fixed,Variable)
| |||||||||||||
| CduplexConfig | 1.3.6.1.4.1.193.223.2.7.1.1.19 | EnableStatusTC | RW | ||||||||||
column · EnableStatusTC · read-write · current Enabling or disabling configuration of Rx freq using duplex distance | |||||||||||||
| CautoFreqSelection | 1.3.6.1.4.1.193.223.2.7.1.1.20 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Automatic frequency selection mode
| |||||||||||||
| CautoFreqSelectedChannel | 1.3.6.1.4.1.193.223.2.7.1.1.21 | Integer32 | RW | ||||||||||
column · Integer32 · read-write · current Automatic frequency selected channel | |||||||||||||
| CautoFreqSelectionStatus | 1.3.6.1.4.1.193.223.2.7.1.1.22 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current Automatic frequency status
| |||||||||||||
| CchannelSpacing | 1.3.6.1.4.1.193.223.2.7.1.1.23 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current Channel spacing
| |||||||||||||
| Cpolarization | 1.3.6.1.4.1.193.223.2.7.1.1.24 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Antenna polarization
| |||||||||||||
| CtxOperStatus | 1.3.6.1.4.1.193.223.2.7.1.1.25 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current Operative status of the transmitter
| |||||||||||||
| CtxAdminStatus | 1.3.6.1.4.1.193.223.2.7.1.1.26 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Administrative status of the transmitter
| |||||||||||||
| CselectedOutputPowerType | 1.3.6.1.4.1.193.223.2.7.1.1.27 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Selected output power type
| |||||||||||||
| CavailableOutputPowerType | 1.3.6.1.4.1.193.223.2.7.1.1.28 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Available output power type
| |||||||||||||
| CselectedMinOutputPower | 1.3.6.1.4.1.193.223.2.7.1.1.29 | Integer32 | RW | ||||||||||
column · Integer32 · read-write · current Selected min output power. Selected min & max output power should be set to the same value for RTPC mode, otherwise the hop operates in ATPC mode. | |||||||||||||
| CselectedMaxOutputPower | 1.3.6.1.4.1.193.223.2.7.1.1.30 | Integer32 | RW | ||||||||||
column · Integer32 · read-write · current Selected max output power. Selected min & max output power should be set to the same value for RTPC mode, otherwise the hop operates in ATPC mode. | |||||||||||||
| CavailableMinOutputPower | 1.3.6.1.4.1.193.223.2.7.1.1.31 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current The minimum output power supported (dBm). The system shows a value if the equipment is available and a frame id has been selected. | |||||||||||||
| CavailableMaxOutputPower | 1.3.6.1.4.1.193.223.2.7.1.1.32 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current The maximum output power supported (dBm). The system shows a value if the equipment is available and a frame id has been selected. | |||||||||||||
| CreferenceSec | 1.3.6.1.4.1.193.223.2.7.1.1.33 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Each modulation is compliant to a Reference Spectrum Efficiency Class (RSEC). When running Adaptive Coding/Modulation, one SEC has to be selected for all the coding/modulations between selectedMinACM and selectedMaxACM. This parameter is called Reference SEC. This setting will affect availableMaxOutputPower, in order to fulfill spectrum requirements. Wanted frameId, txFrequency, rxFrequency, referenceSec, selectedMinAcm and selectedMaxAcm must be a valid combination.
| |||||||||||||
| CtargetInputPowerFarEnd | 1.3.6.1.4.1.193.223.2.7.1.1.34 | Integer32 | RW | ||||||||||
column · Integer32 · read-write · current The wanted input power at far end (dBm), when running ATPC | |||||||||||||
| CberAlarmThreshold | 1.3.6.1.4.1.193.223.2.7.1.1.35 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Threshold for the BER alarm
| |||||||||||||
| CinputPowerAlarmThreshold | 1.3.6.1.4.1.193.223.2.7.1.1.36 | Integer32 | RW | ||||||||||
column · Integer32 · read-write · current Threshold for the input power alarm | |||||||||||||
| CplannedAlignmentInputPower | 1.3.6.1.4.1.193.223.2.7.1.1.37 | Integer32 | RW | ||||||||||
column · Integer32 · read-write · current The planned received input power (dBm) dependent upon selected minimum ACM and corresponding output power. Used when doing alignment | |||||||||||||
| CatpcFallback | 1.3.6.1.4.1.193.223.2.7.1.1.38 | EnableStatusTC | RW | ||||||||||
column · EnableStatusTC · read-write · current Enable or disable the output power fall back function | |||||||||||||
| CatpcFallbackTimer | 1.3.6.1.4.1.193.223.2.7.1.1.39 | Integer32 | RW | ||||||||||
column · Integer32 · read-write · current Specifies the timer for output power fall back (# of seconds) | |||||||||||||
| CatpcFallbackOutputPower | 1.3.6.1.4.1.193.223.2.7.1.1.40 | Integer32 | RW | ||||||||||
column · Integer32 · read-write · current The ATPC fallback output power | |||||||||||||
| CxpicStatus | 1.3.6.1.4.1.193.223.2.7.1.1.41 | XpicMimoTC | RO | ||||||||||
column · XpicMimoTC · read-only · current Status of the XPIC function. | |||||||||||||
| CmimoStatus | 1.3.6.1.4.1.193.223.2.7.1.1.42 | XpicMimoTC | RO | ||||||||||
column · XpicMimoTC · read-only · current Status of the MIMO function. | |||||||||||||
| CactualSnir | 1.3.6.1.4.1.193.223.2.7.1.1.43 | OCTET STRING | RO | 36.7 | |||||||||
column · OCTET STRING · read-only · current Actual signal to noise plus interference ratio (dB). Example values from LibreNMS test devices
| |||||||||||||
| CactualXpi | 1.3.6.1.4.1.193.223.2.7.1.1.44 | OCTET STRING | RO | ||||||||||
column · OCTET STRING · read-only · current The carrier to cross-polar interference level (dBc). | |||||||||||||
| CactualSi | 1.3.6.1.4.1.193.223.2.7.1.1.45 | OCTET STRING | RO | ||||||||||
column · OCTET STRING · read-only · current Spatial interference between the CTs when MIMO is configured. | |||||||||||||
| CactualTxCapacity | 1.3.6.1.4.1.193.223.2.7.1.1.46 | Integer32 | RO | 2000000 | |||||||||
column · Integer32 · read-only · current Actual capacity supported by the carrier termination. Example values from LibreNMS test devices
| |||||||||||||
| ClicensedCapacity | 1.3.6.1.4.1.193.223.2.7.1.1.47 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current Wanted or installed license for the capacity allowed for the carrier termination. | |||||||||||||
| CavailableMinCapacity | 1.3.6.1.4.1.193.223.2.7.1.1.48 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current Minimum capacity possible to use. Given by the selected frame-id (kbit/s) | |||||||||||||
| CavailableMaxCapacity | 1.3.6.1.4.1.193.223.2.7.1.1.49 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current Maximum capacity possible to use. Given by the selected frame-id (kbit/s) | |||||||||||||
| CselectedMinCapacity | 1.3.6.1.4.1.193.223.2.7.1.1.50 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current Selected minimum capacity, derived from selected minimum ACM (kbit/s) | |||||||||||||
| CselectedMaxCapacity | 1.3.6.1.4.1.193.223.2.7.1.1.51 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current Selected maximum capacity, derived from selected maximum ACM (kbit/s) | |||||||||||||
| CwantedLicensedCapacity | 1.3.6.1.4.1.193.223.2.7.1.1.52 | Integer32 | RW | ||||||||||
column · Integer32 · read-write · current Wanted licensed capacity and creation of LRF for the carrier termination (kbit/s) | |||||||||||||
| CavailableMinAcm | 1.3.6.1.4.1.193.223.2.7.1.1.53 | AcmTC | RO | ||||||||||
column · AcmTC · read-only · current Minimum ACM possible to use, given by the selected frame id. | |||||||||||||
| CavailableMaxAcm | 1.3.6.1.4.1.193.223.2.7.1.1.54 | AcmTC | RO | ||||||||||
column · AcmTC · read-only · current Maximum ACM possible to use, given by the selected frame id | |||||||||||||
| CselectedMinAcm | 1.3.6.1.4.1.193.223.2.7.1.1.55 | AcmTC | RW | ||||||||||
column · AcmTC · read-write · current Selected minimum coding/modulation. If selectedMinACM = selectedMaxACM, then the modulation is fixed | |||||||||||||
| CselectedMaxAcm | 1.3.6.1.4.1.193.223.2.7.1.1.56 | AcmTC | RW | ||||||||||
column · AcmTC · read-write · current Selected maximum coding/modulation. If selectedMinACM = selectedMaxACM, then the modulation is fixed | |||||||||||||
| CactualRxAcmTC | 1.3.6.1.4.1.193.223.2.7.1.1.57 | AcmTC | RO | ||||||||||
column · AcmTC · read-only · current Actual rx modulation and coding | |||||||||||||
| CactualTxAcmTC | 1.3.6.1.4.1.193.223.2.7.1.1.58 | AcmTC | RO | 16 | |||||||||
column · AcmTC · read-only · current Actual tx modulation and coding Example values from LibreNMS test devices
| |||||||||||||
| CalignmentMode | 1.3.6.1.4.1.193.223.2.7.1.1.59 | EnableStatusTC | RW | ||||||||||
column · EnableStatusTC · read-write · current Enable or disable the alignment mode | |||||||||||||
| CrfLoop | 1.3.6.1.4.1.193.223.2.7.1.1.60 | EnableStatusTC | RW | ||||||||||
column · EnableStatusTC · read-write · current Enable or disable the rf loop | |||||||||||||
| NptRadioLinkConformance | 1.3.6.1.4.1.193.223.2.7.2 | ||||||||||||
| NptRadioLinkCompliances | 1.3.6.1.4.1.193.223.2.7.2.1 | ||||||||||||
| MptRadioLinkFullCompliance | 1.3.6.1.4.1.193.223.2.7.2.1.1 | ||||||||||||
compliance · current The compliance statement for SNMP entities which implement everything.
| |||||||||||||
| NptRadioLinkGroups | 1.3.6.1.4.1.193.223.2.7.2.2 | ||||||||||||
| GptRadioLinkCompleteGroup | 1.3.6.1.4.1.193.223.2.7.2.2.1 | ||||||||||||
group · current A collection of all current objects in this MIB module.
| |||||||||||||
| TrltTable | 1.3.6.1.4.1.193.223.2.7.3 | NA | |||||||||||
table · not-accessible · current A table of RLT Table entries. | |||||||||||||
| RrltEntry | 1.3.6.1.4.1.193.223.2.7.3.1 | NA | |||||||||||
| CrltDistinguishedName | 1.3.6.1.4.1.193.223.2.7.3.1.1 | OCTET STRING | RO | ||||||||||
column · OCTET STRING · read-only · current Unique id/name of the radio link termination, according to FDN (rack/slot/port/class) | |||||||||||||
| CneIpAddress | 1.3.6.1.4.1.193.223.2.7.3.1.2 | IpAddress | RO | ||||||||||
column · IpAddress · read-only · current NE IP address | |||||||||||||
| CneIpv6Address | 1.3.6.1.4.1.193.223.2.7.3.1.3 | InetAddressIPv6 | RO | ||||||||||
column · InetAddressIPv6 · read-only · current NE IP V6 address | |||||||||||||
| CneName | 1.3.6.1.4.1.193.223.2.7.3.1.4 | OCTET STRING | RO | ||||||||||
column · OCTET STRING · read-only · current NE Name | |||||||||||||
| CneType | 1.3.6.1.4.1.193.223.2.7.3.1.5 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current NE Type
| |||||||||||||
| Cid | 1.3.6.1.4.1.193.223.2.7.3.1.6 | OCTET STRING | RW | ||||||||||
column · OCTET STRING · read-write · current User defined id of the radio link terminal | |||||||||||||
| CrltStatus | 1.3.6.1.4.1.193.223.2.7.3.1.7 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current The status of the radio link terminal
| |||||||||||||
| Cmode | 1.3.6.1.4.1.193.223.2.7.3.1.8 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current The status of the radio link terminal
| |||||||||||||
| CactualTxTotalCapacity | 1.3.6.1.4.1.193.223.2.7.3.1.9 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current Actual aggregated total (packet + TDM) transmitter capacity for the radio link termination. Limited by licenses & configuration (=nearEndLimitedCapacity) and depending on actual modulation/coding used at the moment. | |||||||||||||
| ClimitedTotalCapacity | 1.3.6.1.4.1.193.223.2.7.3.1.10 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current Maximum total capacity allowed by the current configuration and installed licenses. Aggregated from the constituent carrier termination values. | |||||||||||||
| CprotectionStatus | 1.3.6.1.4.1.193.223.2.7.3.1.11 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current Status of a protected node.
| |||||||||||||
| CrevertiveWaitToRestore | 1.3.6.1.4.1.193.223.2.7.3.1.12 | Integer32 | RW | ||||||||||
column · Integer32 · read-write · current The time, in number of seconds, to wait before switching back to the preferred Tx. | |||||||||||||
| CrevertivePreferredTx | 1.3.6.1.4.1.193.223.2.7.3.1.13 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current The preferred carrier termination transmitter.
| |||||||||||||
| CprotectionSwitchMode | 1.3.6.1.4.1.193.223.2.7.3.1.14 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current .The mode in which the switching mechanism is configured
| |||||||||||||
| CfadeNotificationTimer | 1.3.6.1.4.1.193.223.2.7.3.1.15 | Integer32 | RW | ||||||||||
column · Integer32 · read-write · current Notification is sent if fading is longer than this timer, applicable for protection. | |||||||||||||
| CexpectedFarEndId | 1.3.6.1.4.1.193.223.2.7.3.1.16 | OCTET STRING | RW | ||||||||||
column · OCTET STRING · read-write · current Expected id of far-end terminal | |||||||||||||
| CfarEndIdCheck | 1.3.6.1.4.1.193.223.2.7.3.1.17 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Enabling of far end id check.
| |||||||||||||
| CcpriMode | 1.3.6.1.4.1.193.223.2.7.3.1.18 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Set the mode of the CPRI front-haul product.
| |||||||||||||
| CcpriStatus | 1.3.6.1.4.1.193.223.2.7.3.1.19 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current The status of the CPRI front-haul product.
| |||||||||||||
| CmanualSwitch | 1.3.6.1.4.1.193.223.2.7.3.1.20 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Manual switch of protected carrier termination transmitter.
| |||||||||||||
| CmlhcOperStatus | 1.3.6.1.4.1.193.223.2.7.3.1.21 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current Operative status of multi layer header compression.
| |||||||||||||
| CmlhcAdminStatus | 1.3.6.1.4.1.193.223.2.7.3.1.22 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Administrative status of multi layer header compression.
| |||||||||||||
| CmlhcMplsConfig | 1.3.6.1.4.1.193.223.2.7.3.1.23 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current MLHC/MPLS configuration.
| |||||||||||||
| CplcOperStatus | 1.3.6.1.4.1.193.223.2.7.3.1.24 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current Operative status of payload compression.
| |||||||||||||
| CplcAdminStatus | 1.3.6.1.4.1.193.223.2.7.3.1.25 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Administrative status of payload compression.
| |||||||||||||
| NctPerformance | 1.3.6.1.4.1.193.223.2.7.4 | ||||||||||||
| TctG826ContinuousTable | 1.3.6.1.4.1.193.223.2.7.4.1 | NA | |||||||||||
table · not-accessible · current A table of CT G826 Performance Continuous counters entries. The counters are reset by ctG826Reset | |||||||||||||
| RctG826ContinuousEntry | 1.3.6.1.4.1.193.223.2.7.4.1.1 | NA | |||||||||||
| CctG826TimeElapsed | 1.3.6.1.4.1.193.223.2.7.4.1.1.1 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current Time elapsed in seconds since last PMReset | |||||||||||||
| CctBBE | 1.3.6.1.4.1.193.223.2.7.4.1.1.2 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current Background Block Errors | |||||||||||||
| CctBBER | 1.3.6.1.4.1.193.223.2.7.4.1.1.3 | OCTET STRING | RO | ||||||||||
column · OCTET STRING · read-only · current Background Block Errors Ratio | |||||||||||||
| CctES | 1.3.6.1.4.1.193.223.2.7.4.1.1.4 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current Error seconds | |||||||||||||
| CctESR | 1.3.6.1.4.1.193.223.2.7.4.1.1.5 | OCTET STRING | RO | ||||||||||
column · OCTET STRING · read-only · current Error seconds Ratio | |||||||||||||
| CctSES | 1.3.6.1.4.1.193.223.2.7.4.1.1.6 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current Severely error seconds | |||||||||||||
| CctSESR | 1.3.6.1.4.1.193.223.2.7.4.1.1.7 | OCTET STRING | RO | ||||||||||
column · OCTET STRING · read-only · current Severely error seconds Ratio | |||||||||||||
| CctBB | 1.3.6.1.4.1.193.223.2.7.4.1.1.8 | OCTET STRING | RO | ||||||||||
column · OCTET STRING · read-only · current Background blocks | |||||||||||||
| CctUAS | 1.3.6.1.4.1.193.223.2.7.4.1.1.9 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current Unavailable seconds | |||||||||||||
| CctG826Reset | 1.3.6.1.4.1.193.223.2.7.4.1.1.10 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Reset the continuous PM counters
| |||||||||||||
| TctG826Current15mTable | 1.3.6.1.4.1.193.223.2.7.4.2 | NA | |||||||||||
table · not-accessible · current A table of CT Performance G826 15 m current counters Table entries. | |||||||||||||
| RctG826Current15mEntry | 1.3.6.1.4.1.193.223.2.7.4.2.1 | NA | |||||||||||
row · not-accessible · current An entry of CT Performance G826 15 m current Table counters.
| |||||||||||||
| CctG826Current15mTimeElapsed | 1.3.6.1.4.1.193.223.2.7.4.2.1.1 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current Time elapsed in seconds since last PMReset | |||||||||||||
| CctCurrent15mBBE | 1.3.6.1.4.1.193.223.2.7.4.2.1.2 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current Background Block Errors | |||||||||||||
| CctCurrent15mBBER | 1.3.6.1.4.1.193.223.2.7.4.2.1.3 | OCTET STRING | RO | ||||||||||
column · OCTET STRING · read-only · current Background Block Errors Ratio | |||||||||||||
| CctCurrent15mES | 1.3.6.1.4.1.193.223.2.7.4.2.1.4 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current Error seconds | |||||||||||||
| CctCurrent15mESR | 1.3.6.1.4.1.193.223.2.7.4.2.1.5 | OCTET STRING | RO | ||||||||||
column · OCTET STRING · read-only · current Error seconds Ratio | |||||||||||||
| CctCurrent15mSES | 1.3.6.1.4.1.193.223.2.7.4.2.1.6 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current Severely error seconds | |||||||||||||
| CctCurrent15mSESR | 1.3.6.1.4.1.193.223.2.7.4.2.1.7 | OCTET STRING | RO | ||||||||||
column · OCTET STRING · read-only · current Severely error seconds Ratio | |||||||||||||
| CctCurrent15mBB | 1.3.6.1.4.1.193.223.2.7.4.2.1.8 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current Background blocks | |||||||||||||
| CctCurrent15mUAS | 1.3.6.1.4.1.193.223.2.7.4.2.1.9 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current Unavailable seconds | |||||||||||||
| TctG826Current24hTable | 1.3.6.1.4.1.193.223.2.7.4.3 | NA | |||||||||||
table · not-accessible · current A table of CT Performance G826 Current 24h counters entries. | |||||||||||||
| RctG826Current24hEntry | 1.3.6.1.4.1.193.223.2.7.4.3.1 | NA | |||||||||||
| CctG826Current24hTimeElapsed | 1.3.6.1.4.1.193.223.2.7.4.3.1.1 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current Time elapsed in seconds since last PMReset | |||||||||||||
| CctCurrent24hBBE | 1.3.6.1.4.1.193.223.2.7.4.3.1.2 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current Background Block Errors | |||||||||||||
| CctCurrent24hBBER | 1.3.6.1.4.1.193.223.2.7.4.3.1.3 | OCTET STRING | RO | ||||||||||
column · OCTET STRING · read-only · current Background Block Errors Ratio | |||||||||||||
| CctCurrent24hES | 1.3.6.1.4.1.193.223.2.7.4.3.1.4 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current Error seconds | |||||||||||||
| CctCurrent24hESR | 1.3.6.1.4.1.193.223.2.7.4.3.1.5 | OCTET STRING | RO | ||||||||||
column · OCTET STRING · read-only · current Error seconds Ratio | |||||||||||||
| CctCurrent24hSES | 1.3.6.1.4.1.193.223.2.7.4.3.1.6 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current Severely error seconds | |||||||||||||
| CctCurrent24hSESR | 1.3.6.1.4.1.193.223.2.7.4.3.1.7 | OCTET STRING | RO | ||||||||||
column · OCTET STRING · read-only · current Severely error seconds Ratio | |||||||||||||
| CctCurrent24hBB | 1.3.6.1.4.1.193.223.2.7.4.3.1.8 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current Background blocks | |||||||||||||
| CctCurrent24hUAS | 1.3.6.1.4.1.193.223.2.7.4.3.1.9 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current Unavailable seconds | |||||||||||||
Textual conventions
AcmTCINTEGERacm1024Qam(28)acm1024QamLight(29)acm1024QamStrong(30)acm128Qam(19)acm128QamLight(20)acm128QamStrong(21)acm16Qam(10)acm16QamLight(11)acm16QamStrong(12)acm2048Qam(31)acm2048QamLight(32)acm2048QamStrong(33)acm256Qam(22)acm256QamLight(23)acm256QamStrong(24)acm32Qam(13)acm32QamLight(14)acm32QamStrong(15)acm4096Qam(34)acm4096QamLight(35)acm4096QamStrong(36)acm4Qam(7)acm4QamLight(8)acm4QamStrong(9)acm512Qam(25)acm512QamLight(26)acm512QamStrong(27)acm64Qam(16)acm64QamLight(17)acm64QamStrong(18)acmBpsk(4)acmBpskLight(5)acmBpskStrong(6)acmHalfBpsk(1)acmHalfBpskLight(2)acmHalfBpskStrong(3)An integer which indicates the ACM.
EnableStatusTCINTEGERdisabled(2)enabled(1)unknown(3)An integer which indicates the enabled status.
XpicMimoTCINTEGERlocked(2)notAvailable(1)unknown(4)unlocked(3)An integer which indicates the XPIC or MIMO status.