EQLIPSEC-MIB
EqualLogicEquallogic Inc. group information Copyright (c) 2002-2010 by Dell, Inc. All rights reserved. This software may not be copied, disclosed, transferred, or used except in accordance with a license granted by Dell, Inc. This software embodies proprietary information and trade secrets of Dell, Inc.
snmptranslate -m EQLIPSEC-MIB -Tpsnmpwalk -v2c -c <community> -m EQLIPSEC-MIB <host> 1.3.6.1.4.1.12740.22Imports
| EQLGROUP-MIB | eqlGroupId |
|---|---|
| EQLMEMBER-MIB | eqlMemberIndex |
| EQLSTORAGEPOOL-MIB | Unsigned64 |
| EQUALLOGIC-SMI | equalLogic |
| INET-ADDRESS-MIB | InetAddress, InetAddressType |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
| SNMPv2-SMI | Bits, Counter64, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, enterprises, iso |
| SNMPv2-TC | DateAndTime, DisplayString, PhysAddress, RowPointer, RowStatus, StorageType, TEXTUAL-CONVENTION, TimeStamp, TruthValue |
OID tree
| Name | OID | Type | Access | Status |
|---|---|---|---|---|
| IeqlIpsecModule | 1.3.6.1.4.1.12740.22 | |||
identity Equallogic Inc. group information Copyright (c) 2002-2010 by Dell, Inc. All rights reserved. This software may not be copied, disclosed, transferred, or used except in accordance with a license granted by Dell, Inc. This software embodies proprietary information and trade secrets of Dell, Inc. | ||||
| NeqlIpsecObjects | 1.3.6.1.4.1.12740.22.1 | |||
| TeqlIpsecTable | 1.3.6.1.4.1.12740.22.1.1 | NA | ||
table · not-accessible · current EqualLogic-Persistent Storage IPSec global settings This table contains global IPSec settings. | ||||
| ReqlIpsecEntry | 1.3.6.1.4.1.12740.22.1.1.1 | NA | ||
row · not-accessible · current An entry (row) containing global IPSec settings.
| ||||
| CeqlIpsecInstanceId | 1.3.6.1.4.1.12740.22.1.1.1.1 | Integer32 | NA | |
column · Integer32 · not-accessible · current This index identifies the IPSec instance. This index should always be 1. | ||||
| CeqlIpsecEnable | 1.3.6.1.4.1.12740.22.1.1.1.2 | TruthValue | RW | |
column · TruthValue · read-write · current This specifies if IPSec is enabled or disbaled. True for enabled and False for disabled. | ||||
| CeqlIpsecRowStatus | 1.3.6.1.4.1.12740.22.1.1.1.3 | RowStatus | RC | |
column · RowStatus · read-create · current This object indicates the conceptual status of this row. This object may not be set to active if the requirements of the spdIpHeadFiltType object are not met. In other words, if the associated value columns needed by a particular test have not been set, then attempting to change this row to an active state will result in an inconsistentValue error. See the spdIpHeadFiltType object description for further details. | ||||
| TeqlIpsecPolicyTable | 1.3.6.1.4.1.12740.22.1.2 | NA | ||
table · not-accessible · current EqualLogic-Persistent Storage IPSec Policy Table. This table contains a list of filter definitions. | ||||
| ReqlIpsecPolicyEntry | 1.3.6.1.4.1.12740.22.1.2.1 | NA | ||
| CeqlIpsecPolicyInstanceId | 1.3.6.1.4.1.12740.22.1.2.1.1 | Integer32 | NA | |
column · Integer32 · not-accessible · current This index identifies the IPSec policy instance. | ||||
| CeqlIpsecPolicyFilterName | 1.3.6.1.4.1.12740.22.1.2.1.2 | SnmpAdminString (SIZE (1..32)) | RC | |
column · SnmpAdminString (SIZE (1..32)) · read-create · current The administrative name for this filter. | ||||
| CeqlIpsecPolicyFilterIPVersion | 1.3.6.1.4.1.12740.22.1.2.1.3 | InetAddressType | RC | |
column · InetAddressType · read-create · current The Internet Protocol version the addresses are to match against. The value of this property determines the size and format of the eqlIpsecPolicyFilterAddress and eqlIpsecPolicyFilterLocalAddress. | ||||
| CeqlIpsecPolicyFilterAddress | 1.3.6.1.4.1.12740.22.1.2.1.4 | InetAddress | RC | |
column · InetAddress · read-create · current The starting address of a source address range that the packet must match against for this filter to be considered TRUE. This object is only used if sourceAddress is set in spdIpHeadFiltType. | ||||
| CeqlIpsecPolicyFilterNetmaskLen | 1.3.6.1.4.1.12740.22.1.2.1.5 | Integer32 (0..128) | RC | |
column · Integer32 (0..128) · read-create · current The ending address of a source address range to check a packet against, where the starting is specified by the spdIpHeadFiltSrcAddressBegin object. Set this column to the same value as the spdIpHeadFiltSrcAddressBegin column to get an exact single address match. This object is only used if sourceAddress is set in spdIpHeadFiltType. | ||||
| CeqlIpsecPolicyFilterLocalAddress | 1.3.6.1.4.1.12740.22.1.2.1.6 | InetAddress | RC | |
column · InetAddress · read-create · current The Local IP Address on the array to bind a policy to. This option is only used when the Peer is of type manual. Can be either a IPv4 or IPV6 address. | ||||
| CeqlIpsecPolicyFilterPort | 1.3.6.1.4.1.12740.22.1.2.1.7 | Integer32 (0..65535) | RC | |
column · Integer32 (0..65535) · read-create · current The low port of the port range a packet's source must match against. To match, the port number must be greater than or equal to this value. This object is only used if sourcePort is set in spdIpHeadFiltType. The value of 0 for this object is illegal. | ||||
| CeqlIpsecPolicyFilterLocalPort | 1.3.6.1.4.1.12740.22.1.2.1.8 | Integer32 (0..65535) | RC | |
column · Integer32 (0..65535) · read-create · current The low port of the port range a packet's source must match against. To match, the port number must be greater than or equal to this value. This object is only used if sourcePort is set in spdIpHeadFiltType. The value of 0 for this object is illegal. This object specifies the local port to be used. | ||||
| CeqlIpsecPolicyFilterProtocol | 1.3.6.1.4.1.12740.22.1.2.1.9 | Integer32 (0..255) | RC | |
column · Integer32 (0..255) · read-create · current The protocol number the incoming packet must match against for this filter to be evaluated as true. This object is only used if protocol is set in spdIpHeadFiltType. | ||||
| CeqlIpsecPolicyFilterPeerName | 1.3.6.1.4.1.12740.22.1.2.1.10 | SnmpAdminString (SIZE (1..64)) | RC | |
column · SnmpAdminString (SIZE (1..64)) · read-create · current This specifies the name of the peer this policy must be associated with. | ||||
| CeqlIpsecPolicyFilterAction | 1.3.6.1.4.1.12740.22.1.2.1.11 | INTEGER | RC | |
column · INTEGER · read-create · current The action to be taken on packets matching this rule.
| ||||
| CeqlIpsecPolicyFilterRowStatus | 1.3.6.1.4.1.12740.22.1.2.1.12 | RowStatus | RC | |
column · RowStatus · read-create · current This object indicates the conceptual status of this row. This object may not be set to active if the requirements of the spdIpHeadFiltType object are not met. In other words, if the associated value columns needed by a particular test have not been set, then attempting to change this row to an active state will result in an inconsistentValue error. See the spdIpHeadFiltType object description for further details. | ||||
| TeqlIpsecCertConfigTable | 1.3.6.1.4.1.12740.22.1.3 | NA | ||
table · not-accessible · current EqualLogic-Dynamic IPSec certificate configuration Table. This table contains the list of certificates configured. | ||||
| ReqlIpsecCertConfigEntry | 1.3.6.1.4.1.12740.22.1.3.1 | NA | ||
| CeqlIpsecCertInstanceId | 1.3.6.1.4.1.12740.22.1.3.1.1 | Integer32 | NA | |
column · Integer32 · not-accessible · current This index identifies the IPSec certificate instance. | ||||
| CeqlIpsecCertName | 1.3.6.1.4.1.12740.22.1.3.1.2 | SnmpAdminString (SIZE (1..32)) | RC | |
column · SnmpAdminString (SIZE (1..32)) · read-create · current The administrative name for this certificate. | ||||
| CeqlIpsecCertFileName | 1.3.6.1.4.1.12740.22.1.3.1.3 | SnmpAdminString (SIZE (1..128)) | RC | |
column · SnmpAdminString (SIZE (1..128)) · read-create · current The certificate file name. | ||||
| CeqlIpsecCertType | 1.3.6.1.4.1.12740.22.1.3.1.4 | INTEGER | RC | |
column · INTEGER · read-create · current The certificate type. Local cert, Root CA cert or intermediate cert.
| ||||
| CeqlIpsecPrivKeyFileName | 1.3.6.1.4.1.12740.22.1.3.1.5 | SnmpAdminString (SIZE (1..128)) | RC | |
column · SnmpAdminString (SIZE (1..128)) · read-create · current The private key file name. | ||||
| CeqlIpsecCertPassword | 1.3.6.1.4.1.12740.22.1.3.1.6 | SnmpAdminString (SIZE (1..64)) | RC | |
column · SnmpAdminString (SIZE (1..64)) · read-create · current The password to use for decrypting certificate. | ||||
| CeqlIpsecCertRowStatus | 1.3.6.1.4.1.12740.22.1.3.1.7 | RowStatus | RC | |
column · RowStatus · read-create · current This object indicates the conceptual status of this row. This object may not be set to active if the requirements of the spdIpHeadFiltType object are not met. In other words, if the associated value columns needed by a particular test have not been set, then attempting to change this row to an active state will result in an inconsistentValue error. See the spdIpHeadFiltType object description for further details. | ||||
| TeqlIpsecPeerTable | 1.3.6.1.4.1.12740.22.1.4 | NA | ||
table · not-accessible · current EqualLogic-Persistent Storage IPSec peer Table. This table contains the list of peers configured. | ||||
| ReqlIpsecPeerEntry | 1.3.6.1.4.1.12740.22.1.4.1 | NA | ||
| CeqlIpsecPeerInstanceId | 1.3.6.1.4.1.12740.22.1.4.1.1 | Integer32 | NA | |
column · Integer32 · not-accessible · current This index identifies the IPSec policy instance. | ||||
| CeqlIpsecPeerName | 1.3.6.1.4.1.12740.22.1.4.1.2 | SnmpAdminString (SIZE (1..64)) | RC | |
column · SnmpAdminString (SIZE (1..64)) · read-create · current The administrative name for this peer. | ||||
| CeqlIpsecPeerAuthType | 1.3.6.1.4.1.12740.22.1.4.1.3 | INTEGER | RC | |
column · INTEGER · read-create · current The authentication method used with this peer. Pre-shared keys, certificates and manual keys are the options.
| ||||
| CeqlIpsecPeerPreSharedKey | 1.3.6.1.4.1.12740.22.1.4.1.4 | DisplayString (SIZE (6..130)) | RC | |
column · DisplayString (SIZE (6..130)) · read-create · current The pre-shared key to be used during authentication. It is mandatory that this only contain printable ASCII ASCII characters, meaning each byte must be in the range of 33 to 126. | ||||
| CeqlIpsecPeerCertIdType | 1.3.6.1.4.1.12740.22.1.4.1.5 | INTEGER | RW | |
column · INTEGER · read-write · current The identifier type to be used in ID payload. Only applicable if the auth type is certificates.
| ||||
| CeqlIpsecPeerCertIdValue | 1.3.6.1.4.1.12740.22.1.4.1.6 | SnmpAdminString (SIZE (1..256)) | RW | |
column · SnmpAdminString (SIZE (1..256)) · read-write · current The pre-shared key to be used during authentication. Only applicable if the auth type is certificates. | ||||
| CeqlIpsecPeerNullEnc | 1.3.6.1.4.1.12740.22.1.4.1.7 | TruthValue | RC | |
column · TruthValue · read-create · current This specifies if null encryption is to be used. Only applicable if the auth type is certificates or pre-shared keys. | ||||
| CeqlIpsecPeerTunnelMode | 1.3.6.1.4.1.12740.22.1.4.1.8 | TruthValue | RC | |
column · TruthValue · read-create · current This specifies if tunnel mode is to be used with this peer. | ||||
| CeqlIpsecPeerTunnelAddressIPVersion | 1.3.6.1.4.1.12740.22.1.4.1.9 | InetAddressType | RC | |
column · InetAddressType · read-create · current The Internet Protocol version the addresses are to match against. The value of this property determines the size and format of the spdIpHeadFiltSrcAddressBegin, spdIpHeadFiltSrcAddressEnd, spdIpHeadFiltDstAddressBegin, and spdIpHeadFiltDstAddressEnd objects. Values of unknown, ipv4z, ipv6z and dns are not legal values for this object. | ||||
| CeqlIpsecPeerTunnelAddress | 1.3.6.1.4.1.12740.22.1.4.1.10 | InetAddress | RC | |
column · InetAddress · read-create · current The address of the tunnel remote end This object is only used if tunnelMode is set to True. | ||||
| CeqlIpsecPeerIkeV2 | 1.3.6.1.4.1.12740.22.1.4.1.11 | TruthValue | RC | |
column · TruthValue · read-create · current This specifies the IKE version to be used with this peer. If the peer talks the other version, the IPSec session will not be established. | ||||
| CeqlIpsecPeerManualKeyEncAlg | 1.3.6.1.4.1.12740.22.1.4.1.12 | INTEGER | RC | |
column · INTEGER · read-create · current The encryption algorithm to be used. Only applicable if the auth type is manual keys.
| ||||
| CeqlIpsecPeerManualKeyEncKeyOut | 1.3.6.1.4.1.12740.22.1.4.1.13 | SnmpAdminString (SIZE (1..128)) | RC | |
column · SnmpAdminString (SIZE (1..128)) · read-create · current The encryption key to be used in the outbound direction. Specified as a hex string. Only applicable if the auth type is manual keys. | ||||
| CeqlIpsecPeerManualKeyEncKeyIn | 1.3.6.1.4.1.12740.22.1.4.1.14 | SnmpAdminString (SIZE (1..128)) | RC | |
column · SnmpAdminString (SIZE (1..128)) · read-create · current The encryption key to be used in the inbound direction. Specified as a hex string. Only applicable if the auth type is manual keys. | ||||
| CeqlIpsecPeerManualKeyAuthAlg | 1.3.6.1.4.1.12740.22.1.4.1.15 | INTEGER | RC | |
column · INTEGER · read-create · current The authentication algorithm to be used. Only applicable if the auth type is manual keys.
| ||||
| CeqlIpsecPeerManualKeyAuthKeyOut | 1.3.6.1.4.1.12740.22.1.4.1.16 | SnmpAdminString (SIZE (1..128)) | RC | |
column · SnmpAdminString (SIZE (1..128)) · read-create · current The authentication key to be used in the outbound direction. Specified as a string. Only applicable if the auth type is manual keys. | ||||
| CeqlIpsecPeerManualKeyAuthKeyIn | 1.3.6.1.4.1.12740.22.1.4.1.17 | SnmpAdminString (SIZE (1..128)) | RC | |
column · SnmpAdminString (SIZE (1..128)) · read-create · current The authentication key to be used in the inbound direction. Specified as a string. Only applicable if the auth type is manual keys. | ||||
| CeqlIpsecPeerManualKeySpiOut | 1.3.6.1.4.1.12740.22.1.4.1.18 | Integer32 | RC | |
column · Integer32 · read-create · current The SPI to be used in the outbound direction. Only applicable if the auth type is manual keys. | ||||
| CeqlIpsecPeerManualKeySpiIn | 1.3.6.1.4.1.12740.22.1.4.1.19 | Integer32 | RC | |
column · Integer32 · read-create · current The SPI to be used in the inbound direction. Only applicable if the auth type is manual keys. | ||||
| CeqlIpsecPeerRowStatus | 1.3.6.1.4.1.12740.22.1.4.1.20 | RowStatus | RC | |
column · RowStatus · read-create · current This object indicates the conceptual status of this row. This object may not be set to active if the requirements of the spdIpHeadFiltType object are not met. In other words, if the associated value columns needed by a particular test have not been set, then attempting to change this row to an active state will result in an inconsistentValue error. See the spdIpHeadFiltType object description for further details. | ||||
| TeqlIpsecCertDisplayTable | 1.3.6.1.4.1.12740.22.1.5 | NA | ||
table · not-accessible · current EqualLogic-Dynamic IPSec certificate display Table. This table is used to display certificate details. | ||||
| ReqlIpsecCertDisplayEntry | 1.3.6.1.4.1.12740.22.1.5.1 | NA | ||
row · not-accessible · current Contents of a particular certificate instance for display. | ||||
| CeqlIpsecCertDisplayName | 1.3.6.1.4.1.12740.22.1.5.1.1 | SnmpAdminString (SIZE (1..32)) | RC | |
column · SnmpAdminString (SIZE (1..32)) · read-create · current The administrative name for this certificate. | ||||
| CeqlIpsecCertDisplayIssuedToDName | 1.3.6.1.4.1.12740.22.1.5.1.2 | SnmpAdminString (SIZE (1..256)) | RC | |
column · SnmpAdminString (SIZE (1..256)) · read-create · current Display string for the field issued to distinguished name. | ||||
| CeqlIpsecCertDisplaySerialNumber | 1.3.6.1.4.1.12740.22.1.5.1.3 | SnmpAdminString (SIZE (1..128)) | RC | |
column · SnmpAdminString (SIZE (1..128)) · read-create · current Display string for the field serial number. | ||||
| CeqlIpsecCertDisplayIssuedByDName | 1.3.6.1.4.1.12740.22.1.5.1.4 | SnmpAdminString (SIZE (1..256)) | RC | |
column · SnmpAdminString (SIZE (1..256)) · read-create · current Display string for the field issued by distinguished name. | ||||
| CeqlIpsecCertDisplayIssuedOn | 1.3.6.1.4.1.12740.22.1.5.1.5 | SnmpAdminString (SIZE (1..128)) | RC | |
column · SnmpAdminString (SIZE (1..128)) · read-create · current Display string for the field issued on. | ||||
| CeqlIpsecCertDisplayExpiresOn | 1.3.6.1.4.1.12740.22.1.5.1.6 | SnmpAdminString (SIZE (1..128)) | RC | |
column · SnmpAdminString (SIZE (1..128)) · read-create · current Display string for the field expires on. | ||||
| CeqlIpsecCertDisplaySha1Fingerprint | 1.3.6.1.4.1.12740.22.1.5.1.7 | SnmpAdminString (SIZE (1..128)) | RC | |
column · SnmpAdminString (SIZE (1..128)) · read-create · current Display string for the field SHA1 finger print. | ||||
| CeqlIpsecCertDisplayMd5Fingerprint | 1.3.6.1.4.1.12740.22.1.5.1.8 | SnmpAdminString (SIZE (1..128)) | RC | |
column · SnmpAdminString (SIZE (1..128)) · read-create · current Display string for the field MD5 finger print. | ||||
| CeqlIpsecCertDisplayLocal | 1.3.6.1.4.1.12740.22.1.5.1.9 | INTEGER | RC | |
column · INTEGER · read-create · current Boolean that indicates if this is a localm certificate or not.
| ||||
| CeqlIpsecCertDisplayFormat | 1.3.6.1.4.1.12740.22.1.5.1.10 | INTEGER | RC | |
column · INTEGER · read-create · current The certificate format. x.509 or pkcs12.
| ||||
| CeqlIpsecCertDisplaySubAltName | 1.3.6.1.4.1.12740.22.1.5.1.11 | SnmpAdminString (SIZE (1..256)) | RC | |
column · SnmpAdminString (SIZE (1..256)) · read-create · current Display string for the field MD5 finger print. | ||||
| TeqlIpsecSecAssocTable | 1.3.6.1.4.1.12740.22.1.6 | NA | ||
table · not-accessible · current EqualLogic-Dynamic IPSec security association Table. This table is used to display the security association details. | ||||
| ReqlIpsecSecAssocEntry | 1.3.6.1.4.1.12740.22.1.6.1 | NA | ||
row · not-accessible · current Contents of a particular SA instance for display. | ||||
| CeqlIpsecSecAssocInstanceIdHigh | 1.3.6.1.4.1.12740.22.1.6.1.1 | Unsigned32 | NA | |
column · Unsigned32 · not-accessible · current This index carries the high-order 32-bit of the instance ID that identifies the IPSec security association. | ||||
| CeqlIpsecSecAssocInstanceIdLow | 1.3.6.1.4.1.12740.22.1.6.1.2 | Unsigned32 | NA | |
column · Unsigned32 · not-accessible · current This index carries the low-order 32-bit of the instance ID that identifies the IPSec security association. | ||||
| CeqlIpsecSecAssocSrcAddressIPVersion | 1.3.6.1.4.1.12740.22.1.6.1.3 | InetAddressType | RC | |
column · InetAddressType · read-create · current The IP version of the source endpoint. | ||||
| CeqlIpsecSecAssocSrcAddress | 1.3.6.1.4.1.12740.22.1.6.1.4 | InetAddress | RC | |
column · InetAddress · read-create · current The IP address of the source endpoint. | ||||
| CeqlIpsecSecAssocDstAddressIPVersion | 1.3.6.1.4.1.12740.22.1.6.1.5 | InetAddressType | RC | |
column · InetAddressType · read-create · current The IP version of the destination endpoint. | ||||
| CeqlIpsecSecAssocDstAddress | 1.3.6.1.4.1.12740.22.1.6.1.6 | InetAddress | RC | |
column · InetAddress · read-create · current The IP address of the destination endpoint. | ||||
| CeqlIpsecSecAssocEncAlg | 1.3.6.1.4.1.12740.22.1.6.1.7 | INTEGER | RC | |
column · INTEGER · read-create · current The encryption algorithm used.
| ||||
| CeqlIpsecSecAssocAuthAlg | 1.3.6.1.4.1.12740.22.1.6.1.8 | INTEGER | RC | |
column · INTEGER · read-create · current The authentication algorithm used.
| ||||
| CeqlIpsecSecAssocSpi | 1.3.6.1.4.1.12740.22.1.6.1.9 | Integer32 | RC | |
column · Integer32 · read-create · current SPI used in the security association. | ||||
| CeqlIpsecSecAssocEncKey | 1.3.6.1.4.1.12740.22.1.6.1.10 | SnmpAdminString (SIZE (1..128)) | RC | |
column · SnmpAdminString (SIZE (1..128)) · read-create · current Display string for the encryption key used in the SA. | ||||
| CeqlIpsecSecAssocAuthKey | 1.3.6.1.4.1.12740.22.1.6.1.11 | SnmpAdminString (SIZE (1..128)) | RC | |
column · SnmpAdminString (SIZE (1..128)) · read-create · current Display string for the authentication key used in the SA. | ||||
| CeqlIpsecSecAssocManual | 1.3.6.1.4.1.12740.22.1.6.1.12 | TruthValue | RC | |
column · TruthValue · read-create · current True means SA is from a manual key configured. | ||||
| TeqlIpsecStaleSecAssocDeleteTable | 1.3.6.1.4.1.12740.22.1.7 | NA | ||
table · not-accessible · current EqualLogic-Dynamic IPSec stale security association delete Table. This table is used to indicate the destination address and type of all security associations to delete. | ||||
| ReqlIpsecStaleSecAssocDeleteEntry | 1.3.6.1.4.1.12740.22.1.7.1 | NA | ||
row · not-accessible · current Contents of a particular SA instance for delete. | ||||
| CeqlIpsecStaleSecAssocDeleteInstanceId | 1.3.6.1.4.1.12740.22.1.7.1.1 | Integer32 | NA | |
column · Integer32 · not-accessible · current This index identifies the IPSec stale SA delete instance. | ||||
| CeqlIpsecStaleSecAssocDeleteDestAddressIPVersion | 1.3.6.1.4.1.12740.22.1.7.1.2 | InetAddressType | RC | |
column · InetAddressType · read-create · current The IP version of the destination address of the security associations to delete. | ||||
| CeqlIpsecStaleSecAssocDeleteDestAddress | 1.3.6.1.4.1.12740.22.1.7.1.3 | InetAddress | RC | |
column · InetAddress · read-create · current The destination address of the security associations to delete. | ||||
| CeqlIpsecStaleSecAssocDeleteRowStatus | 1.3.6.1.4.1.12740.22.1.7.1.4 | RowStatus | RC | |
column · RowStatus · read-create · current This object indicates the conceptual status of this row. | ||||
| NeqlIpsecNotifications | 1.3.6.1.4.1.12740.22.2 | |||
| NeqlIpsecConformance | 1.3.6.1.4.1.12740.22.3 | |||
Textual conventions
InetPortNumberUnsigned32 (0..65535)Display hint:
dRepresents a 16 bit port number of an Internet transport layer protocol. Port numbers are assigned by IANA. A current list of all assignments is available from <http://www.iana.org/>. The value zero is object-specific and must be defined as part of the description of any object that uses this syntax. Examples of the usage of zero might include situations where a port number is unknown, or when the value zero is used as a wildcard in a filter.
IpsecAuthTypeINTEGERDisplay hint:
dcertificates(2)manualkey(3)presharedkey(1)The IpsecAuthType is used to specify the authentication type to be used with a particular peer.
IpsecEncTypeINTEGERDisplay hint:
daes-cbc(2)nullenc(1)triple-des-cbc(3)The IpsecEncType is used to specify the encryption algorithm to be used when manual keying is used.
IpsecIdTypeINTEGERDisplay hint:
dasn1dn(5)fqdn(4)ipaddress(2)none(1)userfqdn(3)The IpsecIdType is used to specify the type of identifier for a peer to be used with the ID payload.
SnmpAdminStringOCTET STRING (SIZE (0..1024))Display hint:
tAn octet string containing administrative information, preferably in human-readable form.