MIB Browser

CTRON-SSR-HARDWARE-MIB

Enterasys Networks Inc.
This module defines a schema to access SSR hardware configuration.
Organization
Cabletron Systems, Inc.
Root OID
1.3.6.1.4.1.52.2501.1.200
Last updated
Objects
45
Source
Show full MIB
snmptranslate -m CTRON-SSR-HARDWARE-MIB -Tp
snmpwalk -v2c -c <community> -m CTRON-SSR-HARDWARE-MIB <host> 1.3.6.1.4.1.52.2501.1.200

Imports

CTRON-SSR-SMI-MIBssrMibs
SNMPv2-CONFMODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP
SNMPv2-SMIBits, Counter64, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso
SNMPv2-TCDisplayString, PhysAddress, TEXTUAL-CONVENTION

OID tree

NameOIDTypeAccessStatus
NsysHwGroup1.3.6.1.4.1.52.2501.1.1
SsysHwNumSlots1.3.6.1.4.1.52.2501.1.1.1INTEGER (0..64)RO
TsysHwModuleTable1.3.6.1.4.1.52.2501.1.1.2NA
RsysHwModuleEntry1.3.6.1.4.1.52.2501.1.1.2.1NA
CsysHwModuleSlotNumber1.3.6.1.4.1.52.2501.1.1.2.1.1INTEGER (1..65)RO
CsysHwModuleType1.3.6.1.4.1.52.2501.1.1.2.1.2SSRModuleTypeRO
CsysHwModuleDesc1.3.6.1.4.1.52.2501.1.1.2.1.3OCTET STRING (SIZE (0..255))RO
CsysHwModuleNumPorts1.3.6.1.4.1.52.2501.1.1.2.1.4INTEGER (0..256)RO
CsysHwModuleVersion1.3.6.1.4.1.52.2501.1.1.2.1.5OCTET STRING (SIZE (1))RO
CsysHwModuleMemory1.3.6.1.4.1.52.2501.1.1.2.1.6SSRmemorySizeRO
CsysHwModuleService1.3.6.1.4.1.52.2501.1.1.2.1.8SSRserviceTypeRO
CsysHwModuleStatus1.3.6.1.4.1.52.2501.1.1.2.1.9SSRModuleStatusRO
TsysHwPortTable1.3.6.1.4.1.52.2501.1.1.3NA
RsysHwPortEntry1.3.6.1.4.1.52.2501.1.1.3.1NA
CsysHwPortSlotNumber1.3.6.1.4.1.52.2501.1.1.3.1.1INTEGER (1..255)RO
CsysHwPortNumber1.3.6.1.4.1.52.2501.1.1.3.1.2INTEGER (1..255)RO
CsysHwPortType1.3.6.1.4.1.52.2501.1.1.3.1.3SSRPortTypeRO
CsysHwPortConnectorType1.3.6.1.4.1.52.2501.1.1.3.1.4SSRPortConnectorTypeRO
CsysHwPortIfIndex1.3.6.1.4.1.52.2501.1.1.3.1.5SSRInterfaceIndexRO
SsysHwPowerSupply1.3.6.1.4.1.52.2501.1.1.4PowerSupplyBitsRO
SsysHwFan1.3.6.1.4.1.52.2501.1.1.5INTEGERRO
SsysHwTemperature1.3.6.1.4.1.52.2501.1.1.6INTEGERRO
SsysHwChassisId1.3.6.1.4.1.52.2501.1.1.7OCTET STRING (SIZE (0..255))RO
SsysHwTotalInOctets1.3.6.1.4.1.52.2501.1.1.10Counter64ROdeprecated
SsysHwTotalOutOctets1.3.6.1.4.1.52.2501.1.1.11Counter64ROdeprecated
SsysHwTotalInFrames1.3.6.1.4.1.52.2501.1.1.12Counter64ROdeprecated
SsysHwTotalOutFrames1.3.6.1.4.1.52.2501.1.1.13Counter64ROdeprecated
SsysHwTotalL2SwitchedFrames1.3.6.1.4.1.52.2501.1.1.14Counter64ROdeprecated
SsysHwTotalL3SwitchedFrames1.3.6.1.4.1.52.2501.1.1.15Counter64ROdeprecated
SsysHwSwitchingFabric1.3.6.1.4.1.52.2501.1.1.19SSRSwitchingFabricInfoRO
SsysHwControlModuleLED1.3.6.1.4.1.52.2501.1.1.20SSRCmLedStateRO
SsysHwControlModuleBackupState1.3.6.1.4.1.52.2501.1.1.21SSRBackupCMStateRO
SsysHwLastHotSwapEvent1.3.6.1.4.1.52.2501.1.1.22TimeTicksRO
IhardwareMIB1.3.6.1.4.1.52.2501.1.200
NhwConformance1.3.6.1.4.1.52.2501.1.200.2
NhwCompliances1.3.6.1.4.1.52.2501.1.200.2.1
NhwGroups1.3.6.1.4.1.52.2501.1.200.2.2
GhwConfGroupV101.3.6.1.4.1.52.2501.1.200.2.2.1deprecated
MhwComplianceV101.3.6.1.4.1.52.2501.1.200.2.2.1.1deprecated
GhwConfGroupV111.3.6.1.4.1.52.2501.1.200.2.2.2deprecated
MhwComplianceV111.3.6.1.4.1.52.2501.1.200.2.2.2.2deprecated
MhwComplianceV121.3.6.1.4.1.52.2501.1.200.2.2.2.3deprecated
MhwComplianceV301.3.6.1.4.1.52.2501.1.200.2.2.2.4
GhwConfGroupV121.3.6.1.4.1.52.2501.1.200.2.2.3deprecated
GhwConfGroupV301.3.6.1.4.1.52.2501.1.200.2.2.4

Textual conventions

PowerSupplyBits INTEGER (0..255)
The encoding of the bits are as follows :
Each power supply in the system is represented by two bits.
The lower bit reflecting the presence of the power supply and
the higher bit representing it's state. A 1 reflects a properly
working power supply a 0 one which is down.
This encoding allows for a maximum of 16 power supplies.

For example :
The integer value 0x00000007 translates into

0 0 0 0 0 1 1 1 in bits
        | | | |
        | | | +- power supply 1 is present
        | | +--- power supply 1 is working normally
        | +----- power supply 2 is present
        +------- power supply 2 is down
SSRBackupCMState INTEGER

active(5) inactive(2) notInstalled(4) standby(3) unknown(1)

A enumeration that represents the state of the backup control module.

A backup control module prom will boot the system firmware to an
intermediate state and begins sending hello messages to the main cpu
and assume the monitor(3) state. If the prom does not boot the
backup control module, the active control module will report the
status as inactive(2). inactive(2) indicates a failed state as it
means the backup control module can not take over for the active
control module.

If the main cpu fails to respond to the backup control module's
periodic status checks and the backup control module is in the
standby(3) state, the backup control module will reset the active
control module, then reset all line cards and then finish a normal
boot sequence so that it becomes the master. At this point, the
value of this object is active(5).

Flows in the hardware must be reprogrammed and all control protocols
will have to reestablish. An enterprise trap may also be sent.

Normally, slot: CM will be the primary control module. CM/1 is
the slot for the backup control module. If some other line card
exists in slot CM/1 or no card exists, the state of this object
 is notInstalled(4).
SSRCmLedState INTEGER (0..15)
A bit string that represents the status of the active Control Module.
Each LED occupies a bit. The value 1 indicates LED is on, 0 is off.
      The integer value 0x00000015 translates into (bits):
      0 0 0 0 1 1 1 1
              | | | |
              | | | +- System OK  -- SYS OK
              | | +--- Heartbeat  -- HB
              | +----- Error      -- ERR
              + ------ Diagnostic -- Diag
SSRInterfaceIndex INTEGER (0..65535)
A unique value, greater than zero, for each interface
or interface sub-layer in the managed system.  It is
recommended that values are assigned contiguously
starting from 1.  The value for each interface sub-
layer must remain constant at least from one re-
initialization of the entity's network management
system to the next re-initialization.
SSRModuleStatus INTEGER

offline(2) online(1)

Current state of module. online indicates the normal state. Offline indicates a powered off or failed
module. Modules may be powered off prior to hot swap.
SSRModuleType INTEGER

atm155(24) cmts1x4port(15) controlModule(1) controlModule2(11) controlModule3(17) ether100FX(3) ether100TX(2) ether100TX16port(21) fddi2port(16) gigabit6K2PBP(30) gigabitFX2PGBIC(29) gigabitFX4P(27) gigabitFX4PGBIC(28) gigabitLLX(9) gigabitLLX2P(12) gigabitLX(5) gigabitSX(4) gigabitTX(22) hssi(7) none(10) rbControlModule(507) rbEther100TC32P(506) rbEther100TX24P(505) rbGigabit4PGBIC(504) rbGigabit8PGBIC(503) serial2port(13) serial4port(6) serial4portCE(20) sonet2PortOc12(26) sonet4PortOc3(25) unknown(8)

A unique value, greater than zero, for each module
type supported by the SSR series of products.
SSRPortConnectorType INTEGER

aui(9) bncf(21) bncm(22) db15f(4) db15m(3) db25f(6) db25m(5) db9f(2) db9m(1) eia530(13) empty(0) fiberMTRjMM(19) fiberMTRjSM(20) fiberScMM(11) fiberScSM(18) fiberScSMLH(24) ftypef(10) hssi(16) rj11(7) rj21(23) rj45(8) rs44x(14) unknown(17) v35(12) x21(15)

A unique value, greater than zero, for each physical port
type supported by the SSR series of products
SSRPortType INTEGER

cmt(9) ds1(7) ds3(8) e1(10) e3(11) etherFast(1) fddi(12) gigEther(2) hssi(3) serial(4) sonet(6) unknown(5)

A unique value, greater than zero, for each physical port
type supported by the SSR series of products.
SSRSwitchingFabricInfo INTEGER (0..63)
A bit string that represents the status of Switching Fabric
in the shelf/chassis. Switching Fabric #1 is first 2 bits 0-1,
#2 is 2-3.

For example, given a 16 slot SSR 8600 which has one
Switching Fabric in Switching Fabric Slot #1
(lowest full length midplane slot) the
integer value 0x00000007 translates into (bits):
      0 0 0 0 0 1 1 1
              | | | |
              | | | +--- switching fabric #1 is present
              | | +----- switching fabric is primary
              | + ------ switching fabric #2 is present
              +--------- switching fabric is standby
SSRmemorySize INTEGER (-1..2147483647)
An integer that represents the size of memory in Megabytes. -1
represents not-available or not-applicable value.
SSRserviceType OCTET STRING (SIZE (0..7))
A string that is unique to a module in production. This string
is used by Cabletron Service and Manufacturing as
to identify shipped inventory.

Used by