CTRON-SFPS-CONNECTION-MIB
Enterasys Networks Inc.snmptranslate -m CTRON-SFPS-CONNECTION-MIB -Tpsnmpwalk -v2c -c <community> -m CTRON-SFPS-CONNECTION-MIB <host> 1.3.6.1.4.1.52.4.2.4.2.1.15.1Imports
| CTRON-SFPS-INCLUDE-MIB | sfpsCNXPacketStats, sfpsConnectionAPI, sfpsConnectionConfigAPI, sfpsConnectionLookupAPI, sfpsConnectionQueryAPI, sfpsConnectionStats, sfpsConnectionTestAPI, sfpsSwitchConnections |
|---|---|
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
| SNMPv2-SMI | Bits, Counter32, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso |
| SNMPv2-TC | DisplayString, PhysAddress, TEXTUAL-CONVENTION |
OID tree
| Name | OID | Type | Access | Status |
|---|---|---|---|---|
| TsfpsConnectionTable | 1.3.6.1.4.1.52.4.2.4.2.1.3.1 | NA | mandatory | |
table · not-accessible · mandatory This table contains the connection information for all active connections on the SFPS access ports. | ||||
| RsfpsConnectionEntry | 1.3.6.1.4.1.52.4.2.4.2.1.3.1.1 | NA | mandatory | |
row · not-accessible · mandatory Each entry specifies the connection information for the active connection for which the entry exists. | ||||
| CsfpsConnectionDestination | 1.3.6.1.4.1.52.4.2.4.2.1.3.1.1.1 | SfpsAddress | RO | mandatory |
column · SfpsAddress · read-only · mandatory The destination SFPS address for this source/destination connection. | ||||
| CsfpsConnectionSource | 1.3.6.1.4.1.52.4.2.4.2.1.3.1.1.2 | SfpsAddress | RO | mandatory |
column · SfpsAddress · read-only · mandatory The source SFPS address for this source/destination connection. | ||||
| CsfpsConnectionPrimInPort | 1.3.6.1.4.1.52.4.2.4.2.1.3.1.1.3 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory Identifies the primary inbound SFPS switch port. | ||||
| CsfpsConnectionPrimOutPort | 1.3.6.1.4.1.52.4.2.4.2.1.3.1.1.4 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory Identifies the primary outbound SFPS switch port. All switched traffic for this connection will be transmitted on this outbound port. | ||||
| CsfpsConnectionSecInPort | 1.3.6.1.4.1.52.4.2.4.2.1.3.1.1.5 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory Identifies the secondaryinbound SFPS switch port. | ||||
| CsfpsConnectionSecOutPort | 1.3.6.1.4.1.52.4.2.4.2.1.3.1.1.6 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory Identifies the secondary outbound SFPS switch port. All switched traffic for this connection will be transmitted on this outbound port. | ||||
| CsfpsConnectionCtrlStatus | 1.3.6.1.4.1.52.4.2.4.2.1.3.1.1.7 | INTEGER | RW | mandatory |
column · INTEGER · read-write · mandatory The control state of the SFPS connection.
| ||||
| CsfpsConnectionAdminStatus | 1.3.6.1.4.1.52.4.2.4.2.1.3.1.1.8 | INTEGER | RW | mandatory |
column · INTEGER · read-write · mandatory The administrative state of the SFPS connection.
| ||||
| CsfpsConnectionAge | 1.3.6.1.4.1.52.4.2.4.2.1.3.1.1.9 | TimeTicks | RO | mandatory |
column · TimeTicks · read-only · mandatory Indicates the age of the connection. | ||||
| CsfpsConnectionType | 1.3.6.1.4.1.52.4.2.4.2.1.3.1.1.10 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory Sets the type of connection. Provisioned connections are setup manually; switched and vlan connections are setup dynammically.
| ||||
| CsfpsConnectionPkts | 1.3.6.1.4.1.52.4.2.4.2.1.3.1.1.11 | Counter | RO | mandatory |
column · Counter · read-only · mandatory Indicates the total number of packets sent on this connection. | ||||
| CsfpsConnectionBytes | 1.3.6.1.4.1.52.4.2.4.2.1.3.1.1.12 | Counter | RO | mandatory |
column · Counter · read-only · mandatory Indicates the total number of bytes sent on this connection. | ||||
| CsfpsConnectionCanAge | 1.3.6.1.4.1.52.4.2.4.2.1.3.1.1.13 | INTEGER | RO | mandatory |
| CsfpsConnectionPrimOutPorts | 1.3.6.1.4.1.52.4.2.4.2.1.3.1.1.14 | DisplayString | RO | mandatory |
column · DisplayString · read-only · mandatory Identifies a list of outbound SFPS switch ports. All switched traffic for this connection will be transmitted on these outbound ports. | ||||
| CsfpsConnectionSecOutPorts | 1.3.6.1.4.1.52.4.2.4.2.1.3.1.1.15 | DisplayString | RO | mandatory |
column · DisplayString · read-only · mandatory Identifies a list of outbound SFPS switch ports. All switched traffic for this connection will be transmitted on these outbound ports. | ||||
| SsfpsConnectionLookupAPIVerb | 1.3.6.1.4.1.52.4.2.4.2.1.3.2.1 | INTEGER | RW | mandatory |
scalar · INTEGER · read-write · mandatory Specifies the action to be initiated as a result of setting this leaf.
| ||||
| SsfpsConnectionLookupAPIMacAddr | 1.3.6.1.4.1.52.4.2.4.2.1.3.2.2 | SfpsAddress | RW | mandatory |
scalar · SfpsAddress · read-write · mandatory MAC address to be looked up as either the Source or Destination addresses. | ||||
| SsfpsConnectionLookupAPIDestAddr | 1.3.6.1.4.1.52.4.2.4.2.1.3.2.3 | SfpsAddress | RO | mandatory |
scalar · SfpsAddress · read-only · mandatory Destination MAC address | ||||
| SsfpsConnectionLookupAPISourceAddr | 1.3.6.1.4.1.52.4.2.4.2.1.3.2.4 | SfpsAddress | RO | mandatory |
scalar · SfpsAddress · read-only · mandatory Source MAC address | ||||
| SsfpsConnectionLookupAPIPrimInPort | 1.3.6.1.4.1.52.4.2.4.2.1.3.2.5 | INTEGER | RO | mandatory |
scalar · INTEGER · read-only · mandatory Source port number | ||||
| SsfpsConnectionLookupAPIPrimOutPort | 1.3.6.1.4.1.52.4.2.4.2.1.3.2.6 | INTEGER | RO | mandatory |
scalar · INTEGER · read-only · mandatory Destination port number. If -1, denotes multiple out ports. | ||||
| SsfpsConnectionLookupAPISecInPort | 1.3.6.1.4.1.52.4.2.4.2.1.3.2.7 | INTEGER | RO | mandatory |
scalar · INTEGER · read-only · mandatory Source port number | ||||
| SsfpsConnectionLookupAPISecOutPort | 1.3.6.1.4.1.52.4.2.4.2.1.3.2.8 | INTEGER | RO | mandatory |
scalar · INTEGER · read-only · mandatory Destination port number. If 01, denotes multiple out ports | ||||
| SsfpsConnectionLookupAPICtrlStatus | 1.3.6.1.4.1.52.4.2.4.2.1.3.2.9 | INTEGER | RO | mandatory |
scalar · INTEGER · read-only · mandatory Control status
| ||||
| SsfpsConnectionLookupAPIAdminStatus | 1.3.6.1.4.1.52.4.2.4.2.1.3.2.10 | INTEGER | RO | mandatory |
scalar · INTEGER · read-only · mandatory Administrative status
| ||||
| SsfpsConnectionLookupAPIAge | 1.3.6.1.4.1.52.4.2.4.2.1.3.2.11 | TimeTicks | RO | mandatory |
scalar · TimeTicks · read-only · mandatory Age of connection | ||||
| SsfpsConnectionLookupAPIType | 1.3.6.1.4.1.52.4.2.4.2.1.3.2.12 | INTEGER | RO | mandatory |
scalar · INTEGER · read-only · mandatory Type of connection
| ||||
| SsfpsConnectionLookupAPIPkts | 1.3.6.1.4.1.52.4.2.4.2.1.3.2.13 | INTEGER | RO | mandatory |
scalar · INTEGER · read-only · mandatory Number of packets switched on this connection | ||||
| SsfpsConnectionLookupAPIBytes | 1.3.6.1.4.1.52.4.2.4.2.1.3.2.14 | INTEGER | RO | mandatory |
scalar · INTEGER · read-only · mandatory Number of bytes switched on this connection | ||||
| SsfpsConnectionLookupAPICanAge | 1.3.6.1.4.1.52.4.2.4.2.1.3.2.15 | INTEGER | RO | mandatory |
scalar · INTEGER · read-only · mandatory Boolean to determine if this connection will be aged. True (1) means to age. | ||||
| SsfpsConnectionLookupAPIPrimOutPorts | 1.3.6.1.4.1.52.4.2.4.2.1.3.2.16 | DisplayString | RO | mandatory |
scalar · DisplayString · read-only · mandatory If Primary OutPort is -1, the multiple outports will be displayed in text format | ||||
| SsfpsConnectionLookupAPISecOutPorts | 1.3.6.1.4.1.52.4.2.4.2.1.3.2.17 | DisplayString | RO | mandatory |
scalar · DisplayString · read-only · mandatory If Secondary OutPort is -1, the multiple outports will be displayed in text format | ||||
| SsfpsConnectionConfigAPIVerb | 1.3.6.1.4.1.52.4.2.4.2.1.3.3.1 | INTEGER | RW | mandatory |
scalar · INTEGER · read-write · mandatory Specifies the verb.
| ||||
| SsfpsConnectionConfigAPICnxHiMark | 1.3.6.1.4.1.52.4.2.4.2.1.3.3.2 | INTEGER | RW | mandatory |
scalar · INTEGER · read-write · mandatory Specifies the percentage of the Connection Table needed to be full before beginning aging. | ||||
| SsfpsConnectionConfigAPICnxNumToAge | 1.3.6.1.4.1.52.4.2.4.2.1.3.3.3 | INTEGER | RW | mandatory |
scalar · INTEGER · read-write · mandatory Specifies the number of connections to age at each pass. | ||||
| SsfpsConnectionConfigAPIAgePeriod | 1.3.6.1.4.1.52.4.2.4.2.1.3.3.4 | INTEGER | RW | mandatory |
scalar · INTEGER · read-write · mandatory Specifies the age period. Units in minutes. 0 - No periodic aging N - age every N minutes | ||||
| SsfpsConnectionConfigAPIAgePassInProgress | 1.3.6.1.4.1.52.4.2.4.2.1.3.3.5 | INTEGER | RO | mandatory |
scalar · INTEGER · read-only · mandatory Specifies whether the age pass is in progress. 0 - not aging now 1 - aging now. | ||||
| SsfpsConnectionConfigAPICurCapacity | 1.3.6.1.4.1.52.4.2.4.2.1.3.3.6 | INTEGER | RO | mandatory |
scalar · INTEGER · read-only · mandatory Specifies the percentage of the Connection Table used. | ||||
| SsfpsConnectionConfigAPILastPassTime | 1.3.6.1.4.1.52.4.2.4.2.1.3.3.7 | TimeTicks | RO | mandatory |
scalar · TimeTicks · read-only · mandatory Specifies the time that the last age pass occured. | ||||
| SsfpsConnectionConfigAPITimeSinceLastPass | 1.3.6.1.4.1.52.4.2.4.2.1.3.3.8 | TimeTicks | RO | mandatory |
scalar · TimeTicks · read-only · mandatory Specifies the time since the last age pass. | ||||
| SsfpsConnectionConfigAPIAgePassDelta | 1.3.6.1.4.1.52.4.2.4.2.1.3.3.9 | TimeTicks | RO | mandatory |
scalar · TimeTicks · read-only · mandatory Specifies the time between the last two age passes. | ||||
| SsfpsConnectionConfigAPIAgePassCount | 1.3.6.1.4.1.52.4.2.4.2.1.3.3.10 | INTEGER | RO | mandatory |
scalar · INTEGER · read-only · mandatory Specifies the number of aging passes that have occured. | ||||
| SsfpsConnectionConfigAPIAgeStatsHiMark | 1.3.6.1.4.1.52.4.2.4.2.1.3.3.11 | INTEGER | RW | mandatory |
| SsfpsConnectionConfigAPIStatsAgingEnable | 1.3.6.1.4.1.52.4.2.4.2.1.3.3.12 | INTEGER | RW | mandatory |
| SsfpsConnectionConfigAPIAgeStatsAgingSupported | 1.3.6.1.4.1.52.4.2.4.2.1.3.3.13 | INTEGER | RO | mandatory |
| SsfpsConnectionConfigAPIIdleCnxs | 1.3.6.1.4.1.52.4.2.4.2.1.3.3.14 | INTEGER | RO | mandatory |
| SsfpsConnectionConfigAPIActiveCnxs | 1.3.6.1.4.1.52.4.2.4.2.1.3.3.15 | INTEGER | RO | mandatory |
| SsfpsConnectionStatsMaxCnxs | 1.3.6.1.4.1.52.4.2.4.2.1.3.4.1 | INTEGER | RO | mandatory |
scalar · INTEGER · read-only · mandatory The maximum number of bi-directional connections allocated for the switch. | ||||
| SsfpsConnectionStatsTotalCnxs | 1.3.6.1.4.1.52.4.2.4.2.1.3.4.2 | INTEGER | RO | mandatory |
scalar · INTEGER · read-only · mandatory The total number of bi-directional connections used in the switch. | ||||
| SsfpsConnectionStatsSwitchedCnxs | 1.3.6.1.4.1.52.4.2.4.2.1.3.4.3 | INTEGER | RO | mandatory |
scalar · INTEGER · read-only · mandatory The number of bi-directional connections used in the switch with type <switched> | ||||
| SsfpsConnectionStatsVlanCnxs | 1.3.6.1.4.1.52.4.2.4.2.1.3.4.4 | INTEGER | RO | mandatory |
scalar · INTEGER · read-only · mandatory The number of bi-directional connections used in the switch with type <VLAN> | ||||
| SsfpsConnectionStatsFilterCnxs | 1.3.6.1.4.1.52.4.2.4.2.1.3.4.5 | INTEGER | RO | mandatory |
scalar · INTEGER · read-only · mandatory The number of bi-directional connections used in the switch with type <Filter> | ||||
| SsfpsConnectionStatsSelfProgCnxs | 1.3.6.1.4.1.52.4.2.4.2.1.3.4.6 | INTEGER | RO | mandatory |
scalar · INTEGER · read-only · mandatory The number of bi-directional connections used in the switch with type <self Programmed Connections> | ||||
| SsfpsConnectionStatsProvsnedCnxs | 1.3.6.1.4.1.52.4.2.4.2.1.3.4.7 | INTEGER | RO | mandatory |
scalar · INTEGER · read-only · mandatory The number of bi-directional connections used in the switch with type <provisioned> | ||||
| SsfpsConnectionStatsTapCnxs | 1.3.6.1.4.1.52.4.2.4.2.1.3.4.8 | INTEGER | RO | mandatory |
scalar · INTEGER · read-only · mandatory The number of bi-directional connections used in the switch with type <tap> | ||||
| SsfpsConnectionStatsMcastCnxs | 1.3.6.1.4.1.52.4.2.4.2.1.3.4.9 | INTEGER | RO | mandatory |
scalar · INTEGER · read-only · mandatory The number of bi-directional connections used in the switch with type <multicast> | ||||
| SsfpsConnectionStatsNetPortFilterCnxs | 1.3.6.1.4.1.52.4.2.4.2.1.3.4.10 | INTEGER | RO | mandatory |
scalar · INTEGER · read-only · mandatory The number of bi-directional connections used in the switch with type <network port filter connections> | ||||
| SsfpsConnectionStatsNonCriticalVlans | 1.3.6.1.4.1.52.4.2.4.2.1.3.4.11 | INTEGER | RO | mandatory |
scalar · INTEGER · read-only · mandatory Number of non-critical connections - these will be aged first | ||||
| SsfpsConnectionStatsAddErrors | 1.3.6.1.4.1.52.4.2.4.2.1.3.4.12 | INTEGER | RO | mandatory |
scalar · INTEGER · read-only · mandatory Number of errors on adding a connnection | ||||
| SsfpsConnectionStatsDeleteErrors | 1.3.6.1.4.1.52.4.2.4.2.1.3.4.13 | INTEGER | RO | mandatory |
scalar · INTEGER · read-only · mandatory Number of errors on deleting a connection | ||||
| SsfpsConnectionQueryAPIVerb | 1.3.6.1.4.1.52.4.2.4.2.1.3.5.1 | INTEGER | RW | mandatory |
scalar · INTEGER · read-write · mandatory Specifies the action to be initiated as a result of setting this leaf.
| ||||
| SsfpsConnectionQueryAPIDestAddr | 1.3.6.1.4.1.52.4.2.4.2.1.3.5.2 | SfpsAddress | RW | mandatory |
scalar · SfpsAddress · read-write · mandatory Destination MAC address. | ||||
| SsfpsConnectionQueryAPISourceAddr | 1.3.6.1.4.1.52.4.2.4.2.1.3.5.3 | SfpsAddress | RW | mandatory |
scalar · SfpsAddress · read-write · mandatory Source MAC address. | ||||
| SsfpsConnectionQueryAPIInPort | 1.3.6.1.4.1.52.4.2.4.2.1.3.5.4 | INTEGER | RW | mandatory |
scalar · INTEGER · read-write · mandatory Source port number. | ||||
| SsfpsConnectionQueryAPIOutPort | 1.3.6.1.4.1.52.4.2.4.2.1.3.5.5 | INTEGER | RW | mandatory |
scalar · INTEGER · read-write · mandatory Destination port number. | ||||
| SsfpsConnectionQueryAPICtrlStatus | 1.3.6.1.4.1.52.4.2.4.2.1.3.5.6 | INTEGER | RO | mandatory |
scalar · INTEGER · read-only · mandatory Control Status
| ||||
| SsfpsConnectionQueryAPIAdminStatus | 1.3.6.1.4.1.52.4.2.4.2.1.3.5.7 | INTEGER | RO | mandatory |
scalar · INTEGER · read-only · mandatory Administrative Status.
| ||||
| SsfpsConnectionQueryAPIAge | 1.3.6.1.4.1.52.4.2.4.2.1.3.5.8 | INTEGER | RO | mandatory |
scalar · INTEGER · read-only · mandatory Age of connection. | ||||
| SsfpsConnectionQueryAPIQueryType | 1.3.6.1.4.1.52.4.2.4.2.1.3.5.9 | INTEGER | RW | mandatory |
scalar · INTEGER · read-write · mandatory Type of connection.
| ||||
| SsfpsConnectionQueryAPIOwner | 1.3.6.1.4.1.52.4.2.4.2.1.3.5.10 | INTEGER | RO | mandatory |
scalar · INTEGER · read-only · mandatory Specifies whether or not Call control is owned by this agent switch. If the call is owned, then the switch will be responsible for releasing the call. This is used mainly when transferring call ownership in call re-routing and in setting up originating calls. | ||||
| SsfpsConnectionQueryAPIPkts | 1.3.6.1.4.1.52.4.2.4.2.1.3.5.11 | Counter | RO | mandatory |
scalar · Counter · read-only · mandatory Number of packets switched on this connection. | ||||
| SsfpsConnectionQueryAPIBytes | 1.3.6.1.4.1.52.4.2.4.2.1.3.5.12 | Counter | RO | mandatory |
scalar · Counter · read-only · mandatory Number of bytes switched on this connection. | ||||
| SsfpsConnectionQueryAPICanAge | 1.3.6.1.4.1.52.4.2.4.2.1.3.5.13 | INTEGER | RO | mandatory |
scalar · INTEGER · read-only · mandatory Determine if this connection will be aged - (1) means to age. | ||||
| SsfpsConnectionQueryAPIOutPorts | 1.3.6.1.4.1.52.4.2.4.2.1.3.5.14 | DisplayString | RW | mandatory |
scalar · DisplayString · read-write · mandatory If OutPorts is 1 - the multiple outports will be displayed in a text format. | ||||
| SsfpsConnectionQueryAPIMacAddr | 1.3.6.1.4.1.52.4.2.4.2.1.3.5.15 | SfpsAddress | RW | mandatory |
scalar · SfpsAddress · read-write · mandatory MAC address. | ||||
| SsfpsConnectionQueryAPISecInPort | 1.3.6.1.4.1.52.4.2.4.2.1.3.5.16 | INTEGER | RO | mandatory |
| SsfpsConnectionQueryAPISecOutPort | 1.3.6.1.4.1.52.4.2.4.2.1.3.5.17 | INTEGER | RO | mandatory |
| SsfpsConnectionQueryAPISecOutPorts | 1.3.6.1.4.1.52.4.2.4.2.1.3.5.18 | DisplayString | RO | mandatory |
| SsfpsConnectionTestAPIVerb | 1.3.6.1.4.1.52.4.2.4.2.1.3.6.1 | INTEGER | RW | mandatory |
scalar · INTEGER · read-write · mandatory
| ||||
| SsfpsConnectionTestAPIType | 1.3.6.1.4.1.52.4.2.4.2.1.3.6.2 | INTEGER | RW | mandatory |
scalar · INTEGER · read-write · mandatory
| ||||
| SsfpsConnectionTestAPINumCnxs | 1.3.6.1.4.1.52.4.2.4.2.1.3.6.3 | INTEGER | RW | mandatory |
| SsfpsConnectionTestAPIMacAddr | 1.3.6.1.4.1.52.4.2.4.2.1.3.6.4 | SfpsAddress | RW | mandatory |
| SsfpsConnectionTestAPIPort | 1.3.6.1.4.1.52.4.2.4.2.1.3.6.5 | INTEGER | RW | mandatory |
| SsfpsAPIVerb | 1.3.6.1.4.1.52.4.2.4.2.1.4.1 | INTEGER | RW | mandatory |
scalar · INTEGER · read-write · mandatory Specifies the action to be initiated as a result of setting this leaf.
| ||||
| SsfpsAPIInPort | 1.3.6.1.4.1.52.4.2.4.2.1.4.2 | SfpsSwitchPort | RW | mandatory |
scalar · SfpsSwitchPort · read-write · mandatory Specifies the ingress port of the switch. | ||||
| SsfpsAPIInHeaderType | 1.3.6.1.4.1.52.4.2.4.2.1.4.3 | INTEGER | RW | mandatory |
scalar · INTEGER · read-write · mandatory Specfies the type of header being mapped.
| ||||
| SsfpsAPIInHeaderLength | 1.3.6.1.4.1.52.4.2.4.2.1.4.4 | INTEGER (1..12) | RW | mandatory |
scalar · INTEGER (1..12) · read-write · mandatory Specifies the length of the header value. | ||||
| SsfpsAPIInHeaderValue | 1.3.6.1.4.1.52.4.2.4.2.1.4.5 | OCTET STRING | RW | mandatory |
scalar · OCTET STRING · read-write · mandatory Specifies the actual inHeader value for the mapping. | ||||
| SsfpsAPIOutPort | 1.3.6.1.4.1.52.4.2.4.2.1.4.6 | SfpsSwitchPort | RW | mandatory |
scalar · SfpsSwitchPort · read-write · mandatory Specifies the egress port of the switch. | ||||
| SsfpsAPIOutHeaderType | 1.3.6.1.4.1.52.4.2.4.2.1.4.7 | INTEGER | RW | mandatory |
scalar · INTEGER · read-write · mandatory Specfies the type of header being mapped. This value defaults to the value given to sfpsAPIInHeaderType.
| ||||
| SsfpsAPIOutHeaderLength | 1.3.6.1.4.1.52.4.2.4.2.1.4.8 | INTEGER | RW | mandatory |
scalar · INTEGER · read-write · mandatory Specifies the length of the header value. This value defaults to the value given to sfpsAPIInHeaderLength. | ||||
| SsfpsAPIOutHeaderValue | 1.3.6.1.4.1.52.4.2.4.2.1.4.9 | OCTET STRING | RW | mandatory |
scalar · OCTET STRING · read-write · mandatory Specifies the actual outHeader value for the mapping. This value defaults to the value given to sfpsAPIInHeaderValue. | ||||
| SsfpsAPIArgumentDirection | 1.3.6.1.4.1.52.4.2.4.2.1.4.10 | INTEGER | RW | mandatory |
scalar · INTEGER · read-write · mandatory Specifies the direction of the connection.
| ||||
| SsfpsAPIArgumentOwner | 1.3.6.1.4.1.52.4.2.4.2.1.4.11 | INTEGER | RW | mandatory |
scalar · INTEGER · read-write · mandatory Specifies whether or not callcontrol is owned by this agent switch. If the call is owned, then the switch will be responsible for releasing the call. THis is used mainly when transferring call ownership in call re-routing and in setting up originating calls.
| ||||
| SsfpsAPIArgumentPriority | 1.3.6.1.4.1.52.4.2.4.2.1.4.12 | INTEGER | RW | mandatory |
scalar · INTEGER · read-write · mandatory Specifies the outbound priority of the connection.
| ||||
| SsfpsAPIType | 1.3.6.1.4.1.52.4.2.4.2.1.4.13 | INTEGER | RW | mandatory |
scalar · INTEGER · read-write · mandatory Sets the type of connection that should be setup.
| ||||
| SsfpsCNXPacketStatsVer1Tx | 1.3.6.1.4.1.52.4.2.4.2.1.15.1 | INTEGER | RO | mandatory |
scalar · INTEGER · read-only · mandatory Version 1 transmission | ||||
| SsfpsCNXPacketStatsVer2Tx | 1.3.6.1.4.1.52.4.2.4.2.1.15.2 | INTEGER | RO | mandatory |
scalar · INTEGER · read-only · mandatory Version 2 transmission | ||||
| SsfpsCNXPacketStatsVer1Rx | 1.3.6.1.4.1.52.4.2.4.2.1.15.3 | INTEGER | RO | mandatory |
scalar · INTEGER · read-only · mandatory Version 1 receive | ||||
| SsfpsCNXPacketStatsVer2Rx | 1.3.6.1.4.1.52.4.2.4.2.1.15.4 | INTEGER | RO | mandatory |
scalar · INTEGER · read-only · mandatory Version 2 receive | ||||
| SsfpsCNXPacketStatsOpCode1Tx | 1.3.6.1.4.1.52.4.2.4.2.1.15.5 | INTEGER | RO | mandatory |
scalar · INTEGER · read-only · mandatory Operation code 1 transmission | ||||
| SsfpsCNXPacketStatsOpCode2Tx | 1.3.6.1.4.1.52.4.2.4.2.1.15.6 | INTEGER | RO | mandatory |
scalar · INTEGER · read-only · mandatory Operation code 2 tranmission | ||||
| SsfpsCNXPacketStatsOpCode1Rx | 1.3.6.1.4.1.52.4.2.4.2.1.15.7 | INTEGER | RO | mandatory |
scalar · INTEGER · read-only · mandatory Operation code 1 receive | ||||
| SsfpsCNXPacketStatsOpCode2Rx | 1.3.6.1.4.1.52.4.2.4.2.1.15.8 | INTEGER | RO | mandatory |
scalar · INTEGER · read-only · mandatory Operation code 2 receive | ||||
| SsfpsCNXPacketStatsRxErrors | 1.3.6.1.4.1.52.4.2.4.2.1.15.9 | INTEGER | RO | mandatory |
scalar · INTEGER · read-only · mandatory Receive errors | ||||