CTRON-SFCS-MIB
Enterasys Networks Inc.snmptranslate -m CTRON-SFCS-MIB -Tpsnmpwalk -v2c -c <community> -m CTRON-SFCS-MIB <host> 1.3.6.1.4.1.52Imports
| ATM-MIB | atmVcCrossConnectHighIfIndex, atmVcCrossConnectHighVci, atmVcCrossConnectHighVpi, atmVcCrossConnectIndex, atmVcCrossConnectLowIfIndex, atmVcCrossConnectLowVci, atmVcCrossConnectLowVpi |
|---|---|
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
| SNMPv2-SMI | Bits, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, enterprises, iso |
| SNMPv2-TC | DisplayString, PhysAddress, TEXTUAL-CONVENTION, TruthValue |
OID tree
| Name | OID | Type | Access | Status |
|---|---|---|---|---|
| Ncabletron | 1.3.6.1.4.1.52 | |||
| Nmibs | 1.3.6.1.4.1.52.4 | |||
| Nctron | 1.3.6.1.4.1.52.4.1 | |||
| NctDataLink | 1.3.6.1.4.1.52.4.1.2 | |||
| NctSwitch | 1.3.6.1.4.1.52.4.1.2.11 | |||
| NctsfSwitch | 1.3.6.1.4.1.52.4.1.2.11.1 | |||
| NctSFCS | 1.3.6.1.4.1.52.4.1.2.11.1.1 | |||
| NsfcsSystem | 1.3.6.1.4.1.52.4.1.2.11.1.1.1 | |||
| NsfcsSysConfig | 1.3.6.1.4.1.52.4.1.2.11.1.1.1.1 | |||
| NsfcsSysConfigTable | 1.3.6.1.4.1.52.4.1.2.11.1.1.1.1.1 | |||
| NsfcsSysConfigEnt | 1.3.6.1.4.1.52.4.1.2.11.1.1.1.1.1.1 | |||
| SsfcsSysConfigAdminStatus | 1.3.6.1.4.1.52.4.1.2.11.1.1.1.1.1.1.1 | INTEGER | RW | mandatory |
scalar · INTEGER · read-write · mandatory Sets the administrative state of the SFCS switching
services for this virtual switch. This controls the
SFCS state at a chassis level. Regardless of the
per-interface state of each SFCS switching element
and the state of active connections, writing the value
disabled(2) will cause the entire switch to immediately
shutdown.
enabled(1) -- startup the SFCS
disabled(2) -- shutdown the SFCS
other(3) -- none of the following
| ||||
| SsfcsSysConfigOperStatus | 1.3.6.1.4.1.52.4.1.2.11.1.1.1.1.1.1.2 | INTEGER | RO | mandatory |
scalar · INTEGER · read-only · mandatory Indicates the current operating condition of this switch. enabled(1) -- running disabled(2) -- not running other(3) -- none of the following pending-disable(4) -- shut-down in progress pending-enable(5) -- start-up in progress invalid-config(6) -- not running,invalid config
| ||||
| SsfcsSysConfigOperTime | 1.3.6.1.4.1.52.4.1.2.11.1.1.1.1.1.1.3 | TimeTicks | RO | mandatory |
scalar · TimeTicks · read-only · mandatory Indicates the amount of time (# of time ticks) that this switch system has been in its current operational state. | ||||
| SsfcsSysConfigLastChange | 1.3.6.1.4.1.52.4.1.2.11.1.1.1.1.1.1.4 | TimeTicks | RO | mandatory |
scalar · TimeTicks · read-only · mandatory Indicates the last time a change was made to the configuration entry for this switch. | ||||
| SsfcsSysConfigSwitchCapacity | 1.3.6.1.4.1.52.4.1.2.11.1.1.1.1.1.1.5 | INTEGER | RO | mandatory |
scalar · INTEGER · read-only · mandatory Indicates the maximum front panel bandwidth based on current hardware configuration of the switch in Mbps | ||||
| SsfcsSysConfigMaxCnxEntries | 1.3.6.1.4.1.52.4.1.2.11.1.1.1.1.1.1.6 | INTEGER | RO | mandatory |
scalar · INTEGER · read-only · mandatory Indicates the maximum number of connections which can be established on this switch. | ||||
| SsfcsSysConfigMaxStatEntries | 1.3.6.1.4.1.52.4.1.2.11.1.1.1.1.1.1.7 | INTEGER | RO | mandatory |
scalar · INTEGER · read-only · mandatory Indicates the maximum number of stats enabled VCs for this switch. | ||||
| SsfcsSysConfigMaxUpcEntries | 1.3.6.1.4.1.52.4.1.2.11.1.1.1.1.1.1.8 | INTEGER | RO | mandatory |
scalar · INTEGER · read-only · mandatory Indicates the maximum number of UPC enabled VCs for this switch. | ||||
| SsfcsSysConfigNumberANIMS | 1.3.6.1.4.1.52.4.1.2.11.1.1.1.1.1.1.9 | INTEGER | RO | mandatory |
scalar · INTEGER · read-only · mandatory Indicates the number of ATM Network Inteface Modules currently configured on this switch. | ||||
| SsfcsSysConfigInterfaceCapability | 1.3.6.1.4.1.52.4.1.2.11.1.1.1.1.1.1.10 | INTEGER | RO | mandatory |
scalar · INTEGER · read-only · mandatory Indicates the total bandwidth capability(of the engine) for this switch expressed in Mbps. | ||||
| SsfcsSysConfigTypeofSwitch | 1.3.6.1.4.1.52.4.1.2.11.1.1.1.1.1.1.11 | INTEGER | RO | mandatory |
scalar · INTEGER · read-only · mandatory Indicates what type of switch this is. other(1) sfcellswitch(2) sfpacketswitch(3)
| ||||
| SsfcsSysConfigPolicingSupport | 1.3.6.1.4.1.52.4.1.2.11.1.1.1.1.1.1.12 | TruthValue | RO | mandatory |
scalar · TruthValue · read-only · mandatory Indicates whether or not this switch supports policing. supported(1) not supported(2) | ||||
| SsfcsSysConfigPnniNsapPrefix | 1.3.6.1.4.1.52.4.1.2.11.1.1.1.1.1.1.13 | OCTET STRING (SIZE (13)) | RW | mandatory |
scalar · OCTET STRING (SIZE (13)) · read-write · mandatory This is the 13 byte NSAP prefix to use with address registration. | ||||
| SsfcsSysConfigPnniNodeLevel | 1.3.6.1.4.1.52.4.1.2.11.1.1.1.1.1.1.14 | INTEGER | RW | mandatory |
scalar · INTEGER · read-write · mandatory This is the PNNI node level value. The range can be from 0 to 104. | ||||
| SsfcsSysConfigPnniAddessingMode | 1.3.6.1.4.1.52.4.1.2.11.1.1.1.1.1.1.15 | INTEGER | RW | mandatory |
scalar · INTEGER · read-write · mandatory This is the PNNI addressing mode - that can range from 0 to 2. 0 - Auto Mode using MAC 1 - Auto Mode using board# 2 - Manual | ||||
| SsfcsSysConfigPnniAddessingAdmnStatus | 1.3.6.1.4.1.52.4.1.2.11.1.1.1.1.1.1.16 | INTEGER | RW | mandatory |
scalar · INTEGER · read-write · mandatory This is the PNNI addressing admn status. Down - 2. Up - 1. | ||||
| SsfcsSysConfigFMVer | 1.3.6.1.4.1.52.4.1.2.11.1.1.1.1.1.1.17 | OCTET STRING (SIZE (8)) | RO | mandatory |
scalar · OCTET STRING (SIZE (8)) · read-only · mandatory This is the Firmware Revision of the switch. | ||||
| SsfcsSysConfigCTMSlotMask | 1.3.6.1.4.1.52.4.1.2.11.1.1.1.1.1.1.18 | INTEGER | RO | mandatory |
scalar · INTEGER · read-only · mandatory This is the slot mask for all ctm boards in the chassis. The least significant bit represents slot 1. | ||||
| SsfcsSysConfigMaxfreecva | 1.3.6.1.4.1.52.4.1.2.11.1.1.1.1.1.1.19 | INTEGER | RW | mandatory |
scalar · INTEGER · read-write · mandatory This is the maximum number of CAC connection blocks that CAC will allow on its free list. The default is 1024. If too low CAC performance will degrade (thrashing control blocks), If too high, memory exhaustion may occur. | ||||
| SsfcsSysConfigUBR | 1.3.6.1.4.1.52.4.1.2.11.1.1.1.1.1.1.20 | INTEGER | RW | mandatory |
scalar · INTEGER · read-write · mandatory For the set operation: UBR_Cfg is set across all boards in the chassis (that are operational and manageable). For the get operation: UBR_Cfg setting is retrived from the current chassis manager only (one slot only). IF boards are introduced or re-introduced to the chassis their UBR value will be 0. In order to insure a required UBR_Cfg value the set operation should be proformed after slot insertions or re-insertions are completed to the chassis. | ||||
| NsfcsSysStatus | 1.3.6.1.4.1.52.4.1.2.11.1.1.1.2 | |||
| NsfcsSysStatusTable | 1.3.6.1.4.1.52.4.1.2.11.1.1.1.2.1 | |||
| NsfcsSysStatusEnt | 1.3.6.1.4.1.52.4.1.2.11.1.1.1.2.1.1 | |||
| SsfcsSysStatusTdmCellCount | 1.3.6.1.4.1.52.4.1.2.11.1.1.1.2.1.1.1 | OCTET STRING | RO | mandatory |
scalar · OCTET STRING · read-only · mandatory Indicates the total number of cells being transfered across the TDM for the entire switch. | ||||
| SsfcsSysStatusTdmUtilization | 1.3.6.1.4.1.52.4.1.2.11.1.1.1.2.1.1.2 | INTEGER (0..100) | RO | mandatory |
scalar · INTEGER (0..100) · read-only · mandatory Indicates the total percentage TDM utilization for the switch. | ||||
| SsfcsSysStatusCurrCnxEntries | 1.3.6.1.4.1.52.4.1.2.11.1.1.1.2.1.1.3 | INTEGER | RO | mandatory |
scalar · INTEGER · read-only · mandatory Indicates the current number of connection entries for this switch. | ||||
| SsfcsSysStatusCurrUPCEntries | 1.3.6.1.4.1.52.4.1.2.11.1.1.1.2.1.1.4 | INTEGER | RO | mandatory |
scalar · INTEGER · read-only · mandatory Indicates the current number of UPC entries for this switch. | ||||
| SsfcsSysStatusCurrStatsEntries | 1.3.6.1.4.1.52.4.1.2.11.1.1.1.2.1.1.5 | INTEGER | RO | mandatory |
scalar · INTEGER · read-only · mandatory Indicates the current number of statistics entries for this switch. | ||||
| SsfcsSysStatusAllocatedBw | 1.3.6.1.4.1.52.4.1.2.11.1.1.1.2.1.1.6 | INTEGER | RO | mandatory |
scalar · INTEGER · read-only · mandatory Indicates the current allocated bandwidth of the switch in bits per second. | ||||
| NsfcsSysSystemCfg | 1.3.6.1.4.1.52.4.1.2.11.1.1.1.3 | |||
| NsfcsSysSystemCfgTable | 1.3.6.1.4.1.52.4.1.2.11.1.1.1.3.1 | |||
| NsfcsSysSystemCfgEnt | 1.3.6.1.4.1.52.4.1.2.11.1.1.1.3.1.1 | |||
| SsfcsSysConfigAdminReset | 1.3.6.1.4.1.52.4.1.2.11.1.1.1.3.1.1.1 | INTEGER | RW | mandatory |
scalar · INTEGER · read-write · mandatory Resets this virtual switch. Writing a value of
reset(2) will force a restart of the entire switch,
without any graceful shutdown. Any active
connections or services will be interrupted.
other(1) -- none of the following
reset(2) -- force a reset
| ||||
| SsfcsSysConfigATOMPersistance | 1.3.6.1.4.1.52.4.1.2.11.1.1.1.3.1.1.2 | INTEGER | RW | mandatory |
scalar · INTEGER · read-write · mandatory This enables or disables ATOM mib persistance. enabled(1) disabled(2)
| ||||
| SsfcsSysConfigVcSize | 1.3.6.1.4.1.52.4.1.2.11.1.1.1.3.1.1.3 | INTEGER | RW | mandatory |
scalar · INTEGER · read-write · mandatory This entry is the size of VCs allocated for all VPs in the switch. | ||||
| SsfcsSysConfigPowerUpDiags | 1.3.6.1.4.1.52.4.1.2.11.1.1.1.3.1.1.4 | INTEGER | RW | mandatory |
scalar · INTEGER · read-write · mandatory This enables or disables power up diags. enabled(1) disabled(2)
| ||||
| NsfcsSysBPCfg | 1.3.6.1.4.1.52.4.1.2.11.1.1.1.4 | |||
| NsfcsSysBPTable | 1.3.6.1.4.1.52.4.1.2.11.1.1.1.4.1 | |||
| NsfcsSysBPEnt | 1.3.6.1.4.1.52.4.1.2.11.1.1.1.4.1.1 | |||
| SsfcsSysBPClkSelect | 1.3.6.1.4.1.52.4.1.2.11.1.1.1.4.1.1.1 | INTEGER | RW | mandatory |
scalar · INTEGER · read-write · mandatory This enables one of two backplane clocks from any slot. A valid entry is any number that correspond to a slot having a board supporting this mib. A write to this mib will fail if the board with the number selected is deriving its clock from the backplane. A value of 0 indicates that no board is driving the backplane. | ||||
| NsfcsEngine | 1.3.6.1.4.1.52.4.1.2.11.1.1.2 | |||
| NsfcsConfig | 1.3.6.1.4.1.52.4.1.2.11.1.1.2.1 | |||
| TsfcsConfigTable | 1.3.6.1.4.1.52.4.1.2.11.1.1.2.1.1 | NA | mandatory | |
table · not-accessible · mandatory This table contains the configuration and administrative information for each SFCS module. Essentially, a separate SFCS instance exists for each switch module. If SFCS is not configured on a module, than an entry will not exist. | ||||
| RsfcsConfigEntry | 1.3.6.1.4.1.52.4.1.2.11.1.1.2.1.1.1 | NA | mandatory | |
row · not-accessible · mandatory Each entry specifies the SFCS configuration for the SFCS module.
| ||||
| CsfcsConfigSlotIndex | 1.3.6.1.4.1.52.4.1.2.11.1.1.2.1.1.1.1 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The primary index to the SFCS switch table. This identifies the chassis slot number for this switch module. | ||||
| CsfcsConfigAdminStatus | 1.3.6.1.4.1.52.4.1.2.11.1.1.2.1.1.1.2 | INTEGER | RW | mandatory |
column · INTEGER · read-write · mandatory Sets the administrative state of the SFCS switching
services for this SFCS module. This controls the
SFCS state at a module level. Regardless of the
per-interface state of each SFCS switching interface
and the state of active connections, writing the value
disabled(2) will cause the SFCS to immediately
shutdown. A gracefull shutdown will be attempted.
enabled(1) -- startup the SFCS
disabled(2) -- shutdown the SFCS
other(3) -- none of the following
| ||||
| CsfcsConfigAdminReset | 1.3.6.1.4.1.52.4.1.2.11.1.1.2.1.1.1.3 | INTEGER | RW | mandatory |
column · INTEGER · read-write · mandatory Resets this SFCS module. Writing a value of
reset(2) will force a soft restart of the SFCS
without any graceful shutdown. Any active
connections or services will be interrupted.
other(1) -- none of the following
reset(2) -- force a reset
| ||||
| CsfcsConfigOperStatus | 1.3.6.1.4.1.52.4.1.2.11.1.1.2.1.1.1.4 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory Indicates the current operating condition of the SFCS
module.
enabled(1) -- running
disabled(2) -- not running
other(3) -- none of the following
pending-disable(4) -- shut-down in progress
pending-enable(5) -- start-up in progress
invalid-config(6) -- not running,invalid config
| ||||
| CsfcsConfigOperTime | 1.3.6.1.4.1.52.4.1.2.11.1.1.2.1.1.1.5 | TimeTicks | RO | mandatory |
column · TimeTicks · read-only · mandatory Indicates the amount of time (# of time ticks) that this SFCS module has been in its current operational state. | ||||
| CsfcsConfigLastChange | 1.3.6.1.4.1.52.4.1.2.11.1.1.2.1.1.1.6 | TimeTicks | RO | mandatory |
column · TimeTicks · read-only · mandatory Indicates the last time a change was made to the configuration entry for this SFCS switch module. | ||||
| CsfcsConfigVersion | 1.3.6.1.4.1.52.4.1.2.11.1.1.2.1.1.1.7 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory Indicates the current revision level of the SFCS MIB for this switch module expressed as an integer. | ||||
| CsfcsConfigMibRev | 1.3.6.1.4.1.52.4.1.2.11.1.1.2.1.1.1.8 | DisplayString | RO | mandatory |
column · DisplayString · read-only · mandatory Indicates in textual format the current revision level of the Cabletron SFCS MIB for this switch module. | ||||
| CsfcsConfigSwitchHostPort | 1.3.6.1.4.1.52.4.1.2.11.1.1.2.1.1.1.9 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory Indicates the switch port that is attached to the host. | ||||
| CsfcsConfigHostCtrlATMAddr | 1.3.6.1.4.1.52.4.1.2.11.1.1.2.1.1.1.10 | OCTET STRING | RO | mandatory |
column · OCTET STRING · read-only · mandatory Indicates the ATM address of the host. (SAR) | ||||
| CsfcsConfigSwitchCapacity | 1.3.6.1.4.1.52.4.1.2.11.1.1.2.1.1.1.11 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory Indicates the front panel bandwidth based on the hardware that is currently installed, in Mbps. (number of ports and the port type) | ||||
| CsfcsConfigMaxCnxEntries | 1.3.6.1.4.1.52.4.1.2.11.1.1.2.1.1.1.12 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory Indicates the maximum number of connections which can be established on this switch module. | ||||
| CsfcsConfigMaxStatEntries | 1.3.6.1.4.1.52.4.1.2.11.1.1.2.1.1.1.13 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory Indicates the maximum number of stats enabled VCs for this switch module. | ||||
| CsfcsConfigMaxUpcEntries | 1.3.6.1.4.1.52.4.1.2.11.1.1.2.1.1.1.14 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory Indicates the maximum number of UPC enabled VCs for this switch module. | ||||
| CsfcsConfigNumberANIMS | 1.3.6.1.4.1.52.4.1.2.11.1.1.2.1.1.1.15 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory Indicates the number of ATM Network Inteface Modules currently configured on this switch module. | ||||
| CsfcsConfigBwCapability | 1.3.6.1.4.1.52.4.1.2.11.1.1.2.1.1.1.16 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory Indicates the total bandwidth capability for this switch engine expressed in Mbps. | ||||
| CsfcsConfigMasterClock1Source | 1.3.6.1.4.1.52.4.1.2.11.1.1.2.1.1.1.17 | INTEGER | RW | mandatory |
column · INTEGER · read-write · mandatory Indicates the clocking source for MasterClock1 on each board. The write will fail if it is also currently the source of the backplane. The write will also fail if the board does not support backplane clocking.
| ||||
| CsfcsConfigMasterClock2Source | 1.3.6.1.4.1.52.4.1.2.11.1.1.2.1.1.1.18 | INTEGER | RW | mandatory |
column · INTEGER · read-write · mandatory Indicates the clocking source for MasterClock2 on each board. The write will fail if it is also currently the source of the backplane. The write will also fail if the board does not support backplane clocking.
| ||||
| CsfcsConfigMasterClock1Standby | 1.3.6.1.4.1.52.4.1.2.11.1.1.2.1.1.1.19 | INTEGER | RW | mandatory |
column · INTEGER · read-write · mandatory Indicates the clocking stand-by for MasterClock1 on each board. The write will fail if it is also currently the source of the backplane. The write will also fail if the board does not support backplane clocking. If this value is none(7) and an interrupt on the primary interface for MasterClock1 is received. MasterClock1 will switch to that anims local clock.
| ||||
| CsfcsConfigMasterClock2Standby | 1.3.6.1.4.1.52.4.1.2.11.1.1.2.1.1.1.20 | INTEGER | RW | mandatory |
column · INTEGER · read-write · mandatory Indicates the clocking stand-by for MasterClock2 on each board. The write will fail if it is also currently the source of the backplane. The write will also fail if the board does not support backplane clocking. If this value is none(7) and an interrupt on the primary interface for MasterClock1 is received. MasterClock1 will switch to that anims local clock.
| ||||
| NsfcsStatus | 1.3.6.1.4.1.52.4.1.2.11.1.1.2.2 | |||
| TsfcsStatusTable | 1.3.6.1.4.1.52.4.1.2.11.1.1.2.2.1 | NA | mandatory | |
table · not-accessible · mandatory This table contains the status information for each SFCS switch module. | ||||
| RsfcsStatusEntry | 1.3.6.1.4.1.52.4.1.2.11.1.1.2.2.1.1 | NA | mandatory | |
row · not-accessible · mandatory Each entry contains the SFCS statistics for the SFCS instance.
| ||||
| CsfcsStatusSlotIndex | 1.3.6.1.4.1.52.4.1.2.11.1.1.2.2.1.1.1 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The primary index to the SFCS switch table. This identifies the chassis slot number for this SFCS module. | ||||
| CsfcsStatusTdmCellCount | 1.3.6.1.4.1.52.4.1.2.11.1.1.2.2.1.1.2 | OCTET STRING | RO | mandatory |
column · OCTET STRING · read-only · mandatory Indicates the total number of cells being transfered across the TDM for this switch module. | ||||
| CsfcsStatusTdmUtilization | 1.3.6.1.4.1.52.4.1.2.11.1.1.2.2.1.1.3 | INTEGER (0..100) | RO | mandatory |
column · INTEGER (0..100) · read-only · mandatory Indicates the percentage TDM utilization for this switch module. | ||||
| CsfcsStatusCurrCnxEntries | 1.3.6.1.4.1.52.4.1.2.11.1.1.2.2.1.1.4 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory Indicates the current number of connection entries for this switch module. | ||||
| CsfcsStatusCurrUPCEntries | 1.3.6.1.4.1.52.4.1.2.11.1.1.2.2.1.1.5 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory Indicates the current number of UPC entries for this switch module. | ||||
| CsfcsStatusCurrStatsEntries | 1.3.6.1.4.1.52.4.1.2.11.1.1.2.2.1.1.6 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory Indicates the current number of statistics entries for this switch module. | ||||
| CsfcsStatusCurrCtmAgent | 1.3.6.1.4.1.52.4.1.2.11.1.1.2.2.1.1.7 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory Indicates the current board number of the ctm agent for this switch module. | ||||
| NsfcsUPCEngine | 1.3.6.1.4.1.52.4.1.2.11.1.1.2.3 | |||
| TsfcsUPCTable | 1.3.6.1.4.1.52.4.1.2.11.1.1.2.3.1 | NA | mandatory | |
table · not-accessible · mandatory This table contains the Usage Parameter Control info for this SFCS module. | ||||
| RsfcsUPCEntry | 1.3.6.1.4.1.52.4.1.2.11.1.1.2.3.1.1 | NA | mandatory | |
row · not-accessible · mandatory Each entry contains the UPC data for the SFCS instance.
| ||||
| CsfcsUPCSlotIndex | 1.3.6.1.4.1.52.4.1.2.11.1.1.2.3.1.1.1 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The primary index to the SFCS switch table. This identifies the slot number for this SFCS module. | ||||
| CsfcsUPCAdminStatus | 1.3.6.1.4.1.52.4.1.2.11.1.1.2.3.1.1.2 | INTEGER | RW | mandatory |
column · INTEGER · read-write · mandatory Sets the administrative state of the SFCS module's
UPC engine.
enabled(1)
disabled(2)
other(3)
| ||||
| CsfcsUPCOperStatus | 1.3.6.1.4.1.52.4.1.2.11.1.1.2.3.1.1.3 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory Indicates the operational state of the SFCS module's UPC engine.
| ||||
| CsfcsUPCReset | 1.3.6.1.4.1.52.4.1.2.11.1.1.2.3.1.1.4 | INTEGER | RW | mandatory |
column · INTEGER · read-write · mandatory Resets the UPC engine for this SFCS module. other(1) reset(2)
| ||||
| CsfcsUPCOperTime | 1.3.6.1.4.1.52.4.1.2.11.1.1.2.3.1.1.5 | TimeTicks | RO | mandatory |
column · TimeTicks · read-only · mandatory Indicates the amount of time (# of time ticks) that the UPC engine has been active for this switch module. | ||||
| NsfcsStatisticsEngine | 1.3.6.1.4.1.52.4.1.2.11.1.1.2.4 | |||
| TsfcsStatsEngineTable | 1.3.6.1.4.1.52.4.1.2.11.1.1.2.4.1 | NA | mandatory | |
table · not-accessible · mandatory This table contains information for the Statistics engine for a particular switch module. | ||||
| RsfcsStatsEngineEntry | 1.3.6.1.4.1.52.4.1.2.11.1.1.2.4.1.1 | NA | mandatory | |
row · not-accessible · mandatory Each entry contains the statistics engine data for the SFCS module. | ||||
| CsfcsStatsEngineSlotIndex | 1.3.6.1.4.1.52.4.1.2.11.1.1.2.4.1.1.1 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The primary index to the SFCS stats engine table. This identifies the chassis slot number for this SFCS module. | ||||
| CsfcsStatsEngineAdminStatus | 1.3.6.1.4.1.52.4.1.2.11.1.1.2.4.1.1.2 | INTEGER | RW | mandatory |
column · INTEGER · read-write · mandatory Sets the administrative state of the SFCS switch
statistics engine. Writing a value of enabled(1) causes
these counters to become active for this SFCS switch
instance. Writing a value of disabled(2) causes
these counters to become inactive for this SFCS
module.
enabled(1)
disabled(2)
other(3)
| ||||
| CsfcsStatsEngineOperStatus | 1.3.6.1.4.1.52.4.1.2.11.1.1.2.4.1.1.3 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory Indicates the operational state of the SFCS switch
statistics engine for this switch module.
enabled(1)
disabled(2)
other(3)
| ||||
| CsfcsStatsEngineReset | 1.3.6.1.4.1.52.4.1.2.11.1.1.2.4.1.1.4 | INTEGER | RW | mandatory |
column · INTEGER · read-write · mandatory Resets the SFCS switch counters for this SFCS module.
Writing a value of reset(2) resets the SFCS switch
counters to 0 and causes sfcsStatsEngineOperTime
to also be reset to 0.
other(1)
reset(2)
| ||||
| CsfcsStatsEngineOperTime | 1.3.6.1.4.1.52.4.1.2.11.1.1.2.4.1.1.5 | TimeTicks | RO | mandatory |
column · TimeTicks · read-only · mandatory Indicates the amount of time (# of time ticks) that the SFCS switch statistics have been active for this switch module. | ||||
| NsfcsPacketDiscardEngine | 1.3.6.1.4.1.52.4.1.2.11.1.1.2.5 | |||
| TsfcsPacketDiscardEngineTable | 1.3.6.1.4.1.52.4.1.2.11.1.1.2.5.1 | NA | mandatory | |
table · not-accessible · mandatory This table contains information for the Packet Discard engine for a particular switch module. | ||||
| RsfcsPacketDiscardEngineEntry | 1.3.6.1.4.1.52.4.1.2.11.1.1.2.5.1.1 | NA | mandatory | |
row · not-accessible · mandatory Each entry contains the packet discard engine data for the SFCS module. | ||||
| CsfcsPacketDiscardEngineSlotIndex | 1.3.6.1.4.1.52.4.1.2.11.1.1.2.5.1.1.1 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The primary index to the SFCS packet discard engine table. This identifies the chassis slot number for this SFCS module. | ||||
| CsfcsPacketDiscardEngineAdminStatus | 1.3.6.1.4.1.52.4.1.2.11.1.1.2.5.1.1.2 | INTEGER | RW | mandatory |
column · INTEGER · read-write · mandatory Sets the administrative state of the SFCS switch
packet discard engine. Writing a value of enabled(1) causes
these packet discard registers to become active for this SFCS switch
instance. Writing a value of disabled(2) causes
these packet discard registers to become inactive for this SFCS
module.
enabled(1)
disabled(2)
other(3)
| ||||
| CsfcsPacketDiscardEngineOperStatus | 1.3.6.1.4.1.52.4.1.2.11.1.1.2.5.1.1.3 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory Indicates the operational state of the SFCS switch
packet discard engine for this switch module.
enabled(1)
disabled(2)
other(3)
| ||||
| CsfcsPacketDiscardEngineReset | 1.3.6.1.4.1.52.4.1.2.11.1.1.2.5.1.1.4 | INTEGER | RW | mandatory |
column · INTEGER · read-write · mandatory Resets the SFCS switch registers for this SFCS module.
Writing a value of reset(2) resets the SFCS switch packet
discard registers to 0 and causes sfcsPacketDiscardEngineOperTime
to also be reset to 0.
other(1)
reset(2)
| ||||
| CsfcsPacketDiscardEngineEPDPercentage | 1.3.6.1.4.1.52.4.1.2.11.1.1.2.5.1.1.5 | INTEGER (0..100) | RW | mandatory |
column · INTEGER (0..100) · read-write · mandatory Sets the Early Packet Discard threshold percentage for every port, and every priority on a single blade. | ||||
| CsfcsPacketDiscardEngineOperTime | 1.3.6.1.4.1.52.4.1.2.11.1.1.2.5.1.1.6 | TimeTicks | RO | mandatory |
column · TimeTicks · read-only · mandatory Indicates the amount of time (# of time ticks) that the SFCS switch packet discard engine has been active for this switch module. | ||||
| NsfcsANIM | 1.3.6.1.4.1.52.4.1.2.11.1.1.3 | |||
| NsfcsANIMConfig | 1.3.6.1.4.1.52.4.1.2.11.1.1.3.1 | |||
| TsfcsANIMConfigTable | 1.3.6.1.4.1.52.4.1.2.11.1.1.3.1.1 | NA | mandatory | |
table · not-accessible · mandatory This table contains the configuration information for each SFCS ANIM instance. | ||||
| RsfcsANIMConfigEntry | 1.3.6.1.4.1.52.4.1.2.11.1.1.3.1.1.1 | NA | mandatory | |
row · not-accessible · mandatory Each entry contains the SFCS config info for the SFCS instance. | ||||
| CsfcsANIMConfigANIMIndex | 1.3.6.1.4.1.52.4.1.2.11.1.1.3.1.1.1.1 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory This index specifies which ANIM we are dealing with. This reference is in the same format as MIB II's InterfaceIndex. | ||||
| CsfcsANIMConfigAdminStatus | 1.3.6.1.4.1.52.4.1.2.11.1.1.3.1.1.1.2 | INTEGER | RW | mandatory |
column · INTEGER · read-write · mandatory Sets the administrative state of the SFCS switch
ANIM.
enabled(1)
disabled(2)
other(3)
| ||||
| CsfcsANIMConfigOperStatus | 1.3.6.1.4.1.52.4.1.2.11.1.1.3.1.1.1.3 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory Indicates the operational state of the SFCS switch
ANIM for this SFCS ANIM instance.
enabled(1)
disabled(2)
other(3)
| ||||
| CsfcsANIMConfigANIMType | 1.3.6.1.4.1.52.4.1.2.11.1.1.3.1.1.1.4 | OBJECT IDENTIFIER | RO | mandatory |
column · OBJECT IDENTIFIER · read-only · mandatory Indicates the type of physical interface for this ANIM. The types are described in ctron.oids | ||||
| CsfcsANIMConfigNumInterfaces | 1.3.6.1.4.1.52.4.1.2.11.1.1.3.1.1.1.5 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory Indicates the number of operational interfaces for this ANIM. | ||||
| CsfcsANIMConfigLineRate | 1.3.6.1.4.1.52.4.1.2.11.1.1.3.1.1.1.6 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory Indicates the line rate per port for this ANIM in Mbps. | ||||
| CsfcsANIMConfigToMB | 1.3.6.1.4.1.52.4.1.2.11.1.1.3.1.1.1.7 | INTEGER | RW | mandatory |
column · INTEGER · read-write · mandatory This is the ANIM clock source to board.
| ||||
| CsfcsANIMConfigMBClockSelect | 1.3.6.1.4.1.52.4.1.2.11.1.1.3.1.1.1.8 | INTEGER | RW | mandatory |
column · INTEGER · read-write · mandatory This indicates the ANIM clock source.
| ||||
| NsfcsANIMStatistics | 1.3.6.1.4.1.52.4.1.2.11.1.1.3.2 | |||
| TsfcsANIMStatsTable | 1.3.6.1.4.1.52.4.1.2.11.1.1.3.2.1 | NA | mandatory | |
table · not-accessible · mandatory This table contains the statistics information for each SFCS ANIM instance. | ||||
| RsfcsANIMStatsEntry | 1.3.6.1.4.1.52.4.1.2.11.1.1.3.2.1.1 | NA | mandatory | |
row · not-accessible · mandatory Each entry contains the SFCS statistics for the SFCS instance. | ||||
| CsfcsANIMStatsANIMIndex | 1.3.6.1.4.1.52.4.1.2.11.1.1.3.2.1.1.1 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The primary index which specifies which ANIM instance we are dealing with. This index is formatted like MIB II's Interface Index. | ||||
| CsfcsANIMStatsRxCells | 1.3.6.1.4.1.52.4.1.2.11.1.1.3.2.1.1.2 | OCTET STRING | RO | mandatory |
column · OCTET STRING · read-only · mandatory Indicates the number of cells received from this ANIM's interfaces. | ||||
| CsfcsANIMStatsTxCells | 1.3.6.1.4.1.52.4.1.2.11.1.1.3.2.1.1.3 | OCTET STRING | RO | mandatory |
column · OCTET STRING · read-only · mandatory Indicates the number of cells transmitted from this ANIM's interfaces. | ||||
| NsfcsANIMPic | 1.3.6.1.4.1.52.4.1.2.11.1.1.3.3 | |||
| TsfcsANIMPicTable | 1.3.6.1.4.1.52.4.1.2.11.1.1.3.3.1 | NA | mandatory | |
table · not-accessible · mandatory This table contains the PIC information for each SFCS ANIM instance. | ||||
| RsfcsANIMPicEntry | 1.3.6.1.4.1.52.4.1.2.11.1.1.3.3.1.1 | NA | mandatory | |
row · not-accessible · mandatory Each entry contains the SFCS PIC info for the SFCS instance.
| ||||
| CsfcsANIMPicSlot | 1.3.6.1.4.1.52.4.1.2.11.1.1.3.3.1.1.1 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory Specific slot which the module that realizes this PIC resides. If the PIC is associated with the chassis and not a specific module then this value will be 0. | ||||
| CsfcsANIMPicIndex | 1.3.6.1.4.1.52.4.1.2.11.1.1.3.3.1.1.2 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory Uniquely identifies the instance of a PIC in a particular slot. | ||||
| CsfcsANIMPicLocation | 1.3.6.1.4.1.52.4.1.2.11.1.1.3.3.1.1.3 | OBJECT IDENTIFIER | RO | mandatory |
column · OBJECT IDENTIFIER · read-only · mandatory Defines location of the PIC chip. This takes on any of the encoding values defined below for backplane, module, daughter board, brim. | ||||
| CsfcsANIMPicStatus | 1.3.6.1.4.1.52.4.1.2.11.1.1.3.3.1.1.4 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory Provides the status of the specific PIC chip. the values
are defined as follows:
other(1) - firmware can not determine status
present(2) - PIC seems to be functional
notPresent(3) - PIC not found but expected
checkSum(4) - A check sum error occured
error(5) - An undefined error condition exists.
limited(6) - A limited PIC implementation only
type code information is present.
| ||||
| CsfcsANIMPicVersion | 1.3.6.1.4.1.52.4.1.2.11.1.1.3.3.1.1.5 | DisplayString (SIZE (2)) | RO | mandatory |
column · DisplayString (SIZE (2)) · read-only · mandatory Reflects the version of the PIC implementation that this PIC conforms to. This has the format x.yy . If non-existent, this object will be set to all blanks(ascii 32). | ||||
| CsfcsANIMPicModuleType | 1.3.6.1.4.1.52.4.1.2.11.1.1.3.3.1.1.6 | OBJECT IDENTIFIER | RO | mandatory |
column · OBJECT IDENTIFIER · read-only · mandatory Defines the standard module type value as defined in ctron-oids. | ||||
| CsfcsANIMPicMfgPN | 1.3.6.1.4.1.52.4.1.2.11.1.1.3.3.1.1.7 | DisplayString (SIZE (9)) | RO | mandatory |
column · DisplayString (SIZE (9)) · read-only · mandatory Describes the manufacturing level part number of the module
associated with this PIC. This information is encoded as
follows:
7 Characters Part Number
2 Characters Rework Location.
If any field of this object is non-existent, it will be set
to all blanks(ascii 32). | ||||
| CsfcsANIMPicMfgSN | 1.3.6.1.4.1.52.4.1.2.11.1.1.3.3.1.1.8 | DisplayString (SIZE (12)) | RO | mandatory |
column · DisplayString (SIZE (12)) · read-only · mandatory Describes the manufacturing level serial number of the module
associated with this PIC. This information is encoded as
follows:
3 bytes - Date code (year/week)
4 bytes - Serial number
2 bytes - Manufacture location
3 bytes - Board level revision
If any field of this object is non-existent, it will be
set to all blanks(ascii 32). | ||||
| CsfcsANIMPicMfgPartNumb | 1.3.6.1.4.1.52.4.1.2.11.1.1.3.3.1.1.9 | DisplayString (SIZE (7)) | RO | mandatory |
column · DisplayString (SIZE (7)) · read-only · mandatory This object presents the part number portion of the ctPicMfgPN object. This object contains the same information however in a more human readable format. If non-existent, this object will be set to all blanks(ascii 32). | ||||
| CsfcsANIMPicMfgSerialNumb | 1.3.6.1.4.1.52.4.1.2.11.1.1.3.3.1.1.10 | DisplayString (SIZE (4)) | RO | mandatory |
column · DisplayString (SIZE (4)) · read-only · mandatory This object presents the serial number portion of the ctPicMfgSN object. This object contains the same information however in a more human readable format. If non-existent, this object will be set to all blanks(ascii 32). | ||||
| CsfcsANIMPicMfgReworkLocation | 1.3.6.1.4.1.52.4.1.2.11.1.1.3.3.1.1.11 | DisplayString (SIZE (2)) | RO | mandatory |
column · DisplayString (SIZE (2)) · read-only · mandatory The 2 character code that defines the location this module was last reworked. This object contains the same information as presented in ctPicMfgPN object however in a more human readable format. If non-existent, this object will be set to all blanks(ascii 32). | ||||
| CsfcsANIMPicMfgMfgLocation | 1.3.6.1.4.1.52.4.1.2.11.1.1.3.3.1.1.12 | DisplayString (SIZE (2)) | RO | mandatory |
column · DisplayString (SIZE (2)) · read-only · mandatory The two character code that defines the location this module was manufactured at. This object contains the same information as presented in ctPicMfgSN object however in a more human readable format. If non-existent, this object will be set to all blanks(ascii 32). | ||||
| CsfcsANIMPicMfgDateCode | 1.3.6.1.4.1.52.4.1.2.11.1.1.3.3.1.1.13 | DisplayString (SIZE (3)) | RO | mandatory |
column · DisplayString (SIZE (3)) · read-only · mandatory The 3 byte date code field when this module was last reworked. This is in year/week format. This object contains the same information as presented in ctPicMfgSN object however in a more human readable format. If non-existent, this object will be set to all blanks(ascii 32). | ||||
| CsfcsANIMPicMfgRevisionCode | 1.3.6.1.4.1.52.4.1.2.11.1.1.3.3.1.1.14 | DisplayString (SIZE (3)) | RO | mandatory |
column · DisplayString (SIZE (3)) · read-only · mandatory The 3 character board level revision code field of this module. This object contains the same information as presented in ctPicMfgSN object however in a more human readable format. If non-existent, this object will be set to all blanks (ascii 32). | ||||
| CsfcsANIMPicTLPN | 1.3.6.1.4.1.52.4.1.2.11.1.1.3.3.1.1.15 | DisplayString (SIZE (9)) | RO | mandatory |
column · DisplayString (SIZE (9)) · read-only · mandatory Describes the top level part number of the module associated
with this PIC. This information is encoded as follows:
7 Characters Part Number
2 Characters Rework Location.
If any field of this object is non-existent, it will be set
to all blanks(ascii 32). | ||||
| CsfcsANIMPicTLSN | 1.3.6.1.4.1.52.4.1.2.11.1.1.3.3.1.1.16 | DisplayString (SIZE (12)) | RO | mandatory |
column · DisplayString (SIZE (12)) · read-only · mandatory Describes the top level serial number of the module
associated with this PIC. This information is encoded
as follows:
3 bytes - Date code (year/week)
4 bytes - Serial number
2 bytes - Manufacture location
3 bytes - Top level revision
If any field of this object is non-existent, it will be
set to all blanks(ascii 32). | ||||
| CsfcsANIMPicTLPartNumb | 1.3.6.1.4.1.52.4.1.2.11.1.1.3.3.1.1.17 | DisplayString (SIZE (7)) | RO | mandatory |
column · DisplayString (SIZE (7)) · read-only · mandatory This object presents the part number portion of the ctPicTLPN object. This object contains the same information however in a more human readable format. If non-existent, this object will be set to all blanks(ascii 32). | ||||
| CsfcsANIMPicTLSerialNumb | 1.3.6.1.4.1.52.4.1.2.11.1.1.3.3.1.1.18 | DisplayString (SIZE (4)) | RO | mandatory |
column · DisplayString (SIZE (4)) · read-only · mandatory This object presents the serial number portion of the ctPicTLSN object. This object contains the same information however in a more human readable format. If non-existent, this object will be set to all blanks(ascii 32). | ||||
| CsfcsANIMPicTLReworkLocation | 1.3.6.1.4.1.52.4.1.2.11.1.1.3.3.1.1.19 | DisplayString (SIZE (2)) | RO | mandatory |
column · DisplayString (SIZE (2)) · read-only · mandatory The 2 character code that defines the location this module was last reworked. This object contains the same information as presented in ctPicTLPN object however in a more human readable format. If non-existent, this object will be set to all blanks(ascii 32). | ||||
| CsfcsANIMPicTLMfgLocation | 1.3.6.1.4.1.52.4.1.2.11.1.1.3.3.1.1.20 | DisplayString (SIZE (2)) | RO | mandatory |
column · DisplayString (SIZE (2)) · read-only · mandatory The two character code that defines the location this module was manufactured at. This object contains the same information as presented in ctPicTLSN object however in a more human readable format. If non-existent, this object will be set to all blanks(ascii 32). | ||||
| CsfcsANIMPicTLDateCode | 1.3.6.1.4.1.52.4.1.2.11.1.1.3.3.1.1.21 | DisplayString (SIZE (3)) | RO | mandatory |
column · DisplayString (SIZE (3)) · read-only · mandatory The 3 byte date code field when this module was last reworked. This is in year/week format. This object contains the same information as presented in ctPicTLSN object however in a more human readable format. If non-existent, this object will be set to all blanks(ascii 32). | ||||
| CsfcsANIMPicTLRevisionCode | 1.3.6.1.4.1.52.4.1.2.11.1.1.3.3.1.1.22 | DisplayString (SIZE (3)) | RO | mandatory |
column · DisplayString (SIZE (3)) · read-only · mandatory The 3 character top level revision code field of this module. This object contains the same information as presented in ctPicTLSN object however in a more human readable format. If non-existent, this object will be set to all blanks (ascii 32). | ||||
| CsfcsANIMPicTLPcbRevision | 1.3.6.1.4.1.52.4.1.2.11.1.1.3.3.1.1.23 | DisplayString (SIZE (8)) | RO | mandatory |
column · DisplayString (SIZE (8)) · read-only · mandatory Defines the Cabletron revision of the art work for this module. If non-existent, this object will be set to all blanks(ascii 32). | ||||
| CsfcsANIMPicMacAddr | 1.3.6.1.4.1.52.4.1.2.11.1.1.3.3.1.1.24 | OCTET STRING (SIZE (0..6)) | RO | mandatory |
column · OCTET STRING (SIZE (0..6)) · read-only · mandatory The base MAC address(ethernet format)assigned to the module. If this field is not used then it should have a value of a zero length string. If non-existent, this object will be set to all blanks(ascii 32). | ||||
| CsfcsANIMPicNumbRsvdAddrs | 1.3.6.1.4.1.52.4.1.2.11.1.1.3.3.1.1.25 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The number of reserved MAC addresses starting at the address as defined in ctPicMacAddr. If no MAC addresses are reserved this object should have a value of 0. | ||||
| CsfcsANIMPicBoardLevelRevision | 1.3.6.1.4.1.52.4.1.2.11.1.1.3.3.1.1.26 | DisplayString (SIZE (3)) | RO | mandatory |
column · DisplayString (SIZE (3)) · read-only · mandatory Defines the Cabletron board level revision level code for this module. If non-existent, this object will be set to blanks (ascii 32). | ||||
| CsfcsANIMPicModuleTypeString | 1.3.6.1.4.1.52.4.1.2.11.1.1.3.3.1.1.27 | DisplayString (SIZE (16)) | RO | mandatory |
column · DisplayString (SIZE (16)) · read-only · mandatory Describes the module associated with this PIC in a human readable format. If non-existent, this object will be set to blanks (ascii 32). | ||||
| CsfcsANIMPicDcDcConverterType | 1.3.6.1.4.1.52.4.1.2.11.1.1.3.3.1.1.28 | DisplayString (SIZE (12)) | RO | mandatory |
column · DisplayString (SIZE (12)) · read-only · mandatory Describes the voltage of the installed DCDC Converter input and output lines. If the Module does not contain a DCDC Converter this object will be set to blanks (ascii 32). | ||||
| CsfcsANIMPicDcDcConverterInputPower | 1.3.6.1.4.1.52.4.1.2.11.1.1.3.3.1.1.29 | DisplayString (SIZE (3)) | RO | mandatory |
column · DisplayString (SIZE (3)) · read-only · mandatory Describes the maximum allowed input power for the DCDC input line. If the Module does not contain a DCDC Converter this object will be set to blanks (ascii 32). | ||||
| CsfcsANIMPicSmb1PromVersion | 1.3.6.1.4.1.52.4.1.2.11.1.1.3.3.1.1.30 | DisplayString (SIZE (8)) | RO | mandatory |
column · DisplayString (SIZE (8)) · read-only · mandatory Describes the current version of the SMB1 prom. If the Module does not contain an SMB1 prom this object will be set to blanks (ascii 32). | ||||
| NsfcsInterface | 1.3.6.1.4.1.52.4.1.2.11.1.1.4 | |||
| NsfcsInterfaceConfig | 1.3.6.1.4.1.52.4.1.2.11.1.1.4.1 | |||
| TsfcsInterfaceConfigTable | 1.3.6.1.4.1.52.4.1.2.11.1.1.4.1.1 | NA | mandatory | |
table · not-accessible · mandatory This table contains the configuration information of each configured SFCS switch interface. If SFCS is not configured on a port, than an entry will not exist. | ||||
| RsfcsInterfaceConfigEntry | 1.3.6.1.4.1.52.4.1.2.11.1.1.4.1.1.1 | NA | mandatory | |
row · not-accessible · mandatory Each entry specifies the SFCS configuration for the SFCS switch interface for which the entry exists. | ||||
| CsfcsInterfaceConfigInterfaceIndex | 1.3.6.1.4.1.52.4.1.2.11.1.1.4.1.1.1.1 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The index which specifies which interface we are dealing with. | ||||
| CsfcsInterfaceConfigType | 1.3.6.1.4.1.52.4.1.2.11.1.1.4.1.1.1.2 | INTEGER | RO | deprecated |
column · INTEGER · read-only · deprecated Sets the type of interface access attribute for the SFCS
interfaces. Access ports allow single user or shared
access and perform statisics and control; network ports
are equivalent to trunk ports with no access control;
host management port indicates the (virtual) port to which
the (internal) management agent is attached; host control
port indicates the port to redirect non-management packets.
other(1)
access-port(2)
network-port(3)
host-mgmt-port(4)
host-ctl-port(5)
| ||||
| CsfcsInterfacePeakBufferUseage | 1.3.6.1.4.1.52.4.1.2.11.1.1.4.1.1.1.3 | INTEGER (0..100) | RO | mandatory |
column · INTEGER (0..100) · read-only · mandatory An accumulated snap shot of the current peak queue depth for the configured buffer queues. This information is obtained from a read/reset register. | ||||
| CsfcsInterfaceConfigNumberOfQueues | 1.3.6.1.4.1.52.4.1.2.11.1.1.4.1.1.1.4 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory Indicates the number of priority queues configured on this interface. | ||||
| CsfcsInterfaceConfigSigStackID | 1.3.6.1.4.1.52.4.1.2.11.1.1.4.1.1.1.5 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory Indicates the user signalling stack ID for this interface. | ||||
| CsfcsInterfaceConfigClockingSource | 1.3.6.1.4.1.52.4.1.2.11.1.1.4.1.1.1.6 | INTEGER | RW | mandatory |
column · INTEGER · read-write · mandatory The interface clocking source.
| ||||
| NsfcsInterfaceStatistics | 1.3.6.1.4.1.52.4.1.2.11.1.1.4.2 | |||
| TsfcsInterfaceStatsTable | 1.3.6.1.4.1.52.4.1.2.11.1.1.4.2.1 | NA | mandatory | |
table · not-accessible · mandatory This table contains the cell counts for each SFCS switch interface. | ||||
| RsfcsInterfaceStatsEntry | 1.3.6.1.4.1.52.4.1.2.11.1.1.4.2.1.1 | NA | mandatory | |
row · not-accessible · mandatory Specifies the SFCS cell counts for the SFCS interface for which this entry exists. | ||||
| CsfcsInterfaceStatsInterfaceIndex | 1.3.6.1.4.1.52.4.1.2.11.1.1.4.2.1.1.1 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The index which specifies which interface we are dealing with. | ||||
| CsfcsInterfaceStatsRxErrors | 1.3.6.1.4.1.52.4.1.2.11.1.1.4.2.1.1.2 | OCTET STRING | RO | mandatory |
column · OCTET STRING · read-only · mandatory Indicates the number of receive path lookup invalid and out of range errors. | ||||
| CsfcsInterfaceStatsVPILookupInvalidErrors | 1.3.6.1.4.1.52.4.1.2.11.1.1.4.2.1.1.3 | OCTET STRING | RO | mandatory |
column · OCTET STRING · read-only · mandatory Indicates the number of VPI lookup invalid and out of range errors. | ||||
| CsfcsInterfaceStatsRxCnxLookupInvalidErrors | 1.3.6.1.4.1.52.4.1.2.11.1.1.4.2.1.1.4 | OCTET STRING | RO | mandatory |
column · OCTET STRING · read-only · mandatory Indicates the number of receive connection lookup invalid errors. | ||||
| CsfcsInterfaceStatsRxCellCnt | 1.3.6.1.4.1.52.4.1.2.11.1.1.4.2.1.1.5 | OCTET STRING | RO | mandatory |
column · OCTET STRING · read-only · mandatory Indicates the number of receive cells on this interface. | ||||
| CsfcsInterfaceStatsTxCellCnt | 1.3.6.1.4.1.52.4.1.2.11.1.1.4.2.1.1.6 | OCTET STRING | RO | mandatory |
column · OCTET STRING · read-only · mandatory Indicates the number of transmit cells on this interface. | ||||
| CsfcsInterfaceStatsOverflowDropCellCnt | 1.3.6.1.4.1.52.4.1.2.11.1.1.4.2.1.1.7 | OCTET STRING | RO | mandatory |
column · OCTET STRING · read-only · mandatory Indicates the number of cells that were dropped due to queue overflows. | ||||
| NsfcsQueue | 1.3.6.1.4.1.52.4.1.2.11.1.1.5 | |||
| NsfcsQueueConfig | 1.3.6.1.4.1.52.4.1.2.11.1.1.5.1 | |||
| TsfcsQueueConfigTable | 1.3.6.1.4.1.52.4.1.2.11.1.1.5.1.1 | NA | mandatory | |
table · not-accessible · mandatory This table contains the configuration information for all queues on the SFCS. | ||||
| RsfcsQueueConfigEntry | 1.3.6.1.4.1.52.4.1.2.11.1.1.5.1.1.1 | NA | mandatory | |
row · not-accessible · mandatory Each entry specifies the queue information for the SFCS switch for which the entry exists. | ||||
| CsfcsQueueConfigInterfaceIndex | 1.3.6.1.4.1.52.4.1.2.11.1.1.5.1.1.1.1 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The index which specifies which interface we are dealing with. | ||||
| CsfcsQueueConfigQueueIndex | 1.3.6.1.4.1.52.4.1.2.11.1.1.5.1.1.1.2 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The index which specifies which transmit queue we are dealing with. | ||||
| CsfcsQueueConfigQueueSize | 1.3.6.1.4.1.52.4.1.2.11.1.1.5.1.1.1.3 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory Indicates the size of the transmit queue for this queue instance. | ||||
| CsfcsQueueConfigQueueBandwidth | 1.3.6.1.4.1.52.4.1.2.11.1.1.5.1.1.1.4 | INTEGER (0..100) | RO | mandatory |
column · INTEGER (0..100) · read-only · mandatory Indicates the percentage of this interface's bandwidth utilized by this particular queue. | ||||
| CsfcsQueueConfigClpDropThreshold | 1.3.6.1.4.1.52.4.1.2.11.1.1.5.1.1.1.5 | INTEGER (0..100) | RW | mandatory |
column · INTEGER (0..100) · read-write · mandatory Indicates the queue level to start dropping CLP=1 cells for this queue. This level is expressed as the percentage of this queue's size. | ||||
| CsfcsQueueConfigCongestionThreshold | 1.3.6.1.4.1.52.4.1.2.11.1.1.5.1.1.1.6 | INTEGER (0..100) | RW | mandatory |
column · INTEGER (0..100) · read-write · mandatory Indicates the level to consider this queue congested. This level is expressed as the percentage of this queue's size. | ||||
| CsfcsQueueConfigEFCILowThreshold | 1.3.6.1.4.1.52.4.1.2.11.1.1.5.1.1.1.7 | INTEGER (0..100) | RW | mandatory |
column · INTEGER (0..100) · read-write · mandatory Indicates the lower threshold used for EFCI for this queue instance. This level is expressed as the percentage of this queue's size. | ||||
| CsfcsQueueConfigRMThreshold | 1.3.6.1.4.1.52.4.1.2.11.1.1.5.1.1.1.8 | INTEGER (0..100) | RW | mandatory |
column · INTEGER (0..100) · read-write · mandatory Indicates the remote management queue threshold expressed as a percentage of the queue's size. When this level is hit, a management message is sent to the sender notifying it to slow down. | ||||
| CsfcsQueueConfigEPDThreshold | 1.3.6.1.4.1.52.4.1.2.11.1.1.5.1.1.1.9 | INTEGER (0..100) | RW | mandatory |
column · INTEGER (0..100) · read-write · mandatory Indicates the Early Packet Discard threshold expressed as a percentage of the queue's size. When this level is exceeded the Transmit ASIC starts to drop all cells entering this queue. | ||||
| NsfcsQueueStatistics | 1.3.6.1.4.1.52.4.1.2.11.1.1.5.2 | |||
| TsfcsQueueStatsTable | 1.3.6.1.4.1.52.4.1.2.11.1.1.5.2.1 | NA | mandatory | |
table · not-accessible · mandatory This table contains the statistics information for all queues on the SFCS. | ||||
| RsfcsQueueStatsEntry | 1.3.6.1.4.1.52.4.1.2.11.1.1.5.2.1.1 | NA | mandatory | |
row · not-accessible · mandatory Each entry specifies the queue information for the SFCS switch for which the entry exists. | ||||
| CsfcsQueueStatsInterfaceIndex | 1.3.6.1.4.1.52.4.1.2.11.1.1.5.2.1.1.1 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The index which specifies which interface we are dealing with. | ||||
| CsfcsQueueStatsQueue | 1.3.6.1.4.1.52.4.1.2.11.1.1.5.2.1.1.2 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The index which specifies which queue we are dealing with. | ||||
| CsfcsQueueStatsTxClpCellsDiscarded | 1.3.6.1.4.1.52.4.1.2.11.1.1.5.2.1.1.3 | OCTET STRING | RO | mandatory |
column · OCTET STRING · read-only · mandatory Indicates the number of cells with CLP=1 that were discarded for this queue instance. | ||||
| CsfcsQueueStatsTxCellsDropped | 1.3.6.1.4.1.52.4.1.2.11.1.1.5.2.1.1.4 | OCTET STRING | RO | mandatory |
column · OCTET STRING · read-only · mandatory Indicates the number of cells that overflowed the buffer for this queue instance. | ||||
| CsfcsQueueStatsQueuePeakLevel | 1.3.6.1.4.1.52.4.1.2.11.1.1.5.2.1.1.5 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory Indicates the peak level since last read for this queue instance. | ||||
| CsfcsQueueStatsTxCellCnt | 1.3.6.1.4.1.52.4.1.2.11.1.1.5.2.1.1.6 | OCTET STRING | RO | mandatory |
column · OCTET STRING · read-only · mandatory Indicates the transmit cell count on a per queue basis. A value of zero indicates not available | ||||
| NsfcsConnection | 1.3.6.1.4.1.52.4.1.2.11.1.1.7 | |||
| NsfcsConnectionConfig | 1.3.6.1.4.1.52.4.1.2.11.1.1.7.1 | |||
| TsfcsCnxCfgTable | 1.3.6.1.4.1.52.4.1.2.11.1.1.7.1.1 | NA | mandatory | |
table · not-accessible · mandatory This table contains the connection configuration information. | ||||
| RsfcsCnxCfgEntry | 1.3.6.1.4.1.52.4.1.2.11.1.1.7.1.1.1 | NA | mandatory | |
row · not-accessible · mandatory Each entry specifies the connection configuration information for the SFCS switch connection instance. | ||||
| CsfcsCnxCfgCrossConnectIndex | 1.3.6.1.4.1.52.4.1.2.11.1.1.7.1.1.1.1 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory A unique value to identify this cross-connect. | ||||
| CsfcsCnxCfgCrossConnectLowIfIndex | 1.3.6.1.4.1.52.4.1.2.11.1.1.7.1.1.1.2 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The value of this object is equal to the low MIB II IfIndex value of the ATM interface port for this cross-connect. | ||||
| CsfcsCnxCfgCrossConnectLowVpi | 1.3.6.1.4.1.52.4.1.2.11.1.1.7.1.1.1.3 | INTEGER (0..4095) | RO | mandatory |
column · INTEGER (0..4095) · read-only · mandatory The value of this object is equal to the low VPI value at the ATM interface associated with the cross-connect that is identified by sfcsCnxCfgCrossConnectIndex. | ||||
| CsfcsCnxCfgCrossConnectLowVci | 1.3.6.1.4.1.52.4.1.2.11.1.1.7.1.1.1.4 | INTEGER (0..65535) | RO | mandatory |
column · INTEGER (0..65535) · read-only · mandatory The value of this object is equal to the low VCI value at the ATM interface associated with this cross-connect that is identified by sfcsCnxCfgCrossConnectIndex. | ||||
| CsfcsCnxCfgCrossConnectHighIfIndex | 1.3.6.1.4.1.52.4.1.2.11.1.1.7.1.1.1.5 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The value of this object is equal to the high MIB II IfIndex value of the ATM interface port for this cross-connect. | ||||
| CsfcsCnxCfgCrossConnectHighVpi | 1.3.6.1.4.1.52.4.1.2.11.1.1.7.1.1.1.6 | INTEGER (0..4095) | RO | mandatory |
column · INTEGER (0..4095) · read-only · mandatory The value of this object is equal to the high VPI value at the ATM interface associated with the cross-connect that is identified by sfcsCnxCfgCrossConnectIndex. | ||||
| CsfcsCnxCfgCrossConnectHighVci | 1.3.6.1.4.1.52.4.1.2.11.1.1.7.1.1.1.7 | INTEGER (0..65535) | RO | mandatory |
column · INTEGER (0..65535) · read-only · mandatory The value of this object is equal to the high VCI value at the ATM interface associated with this cross-connect that is identified by sfcsCnxCfgCrossConnectIndex. | ||||
| CsfcsCnxCfgType | 1.3.6.1.4.1.52.4.1.2.11.1.1.7.1.1.1.8 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory Indicates the connection type for this VC. point-to-point-vpl(1) point-to-mpoint-vpl(2) mpoint-to-mpoint-vpl(3) point-to-point-vcl(4) point-to-mpoint-vcl(5) mpoint-to-mpoint-vcl(6)
| ||||
| CsfcsCnxCfgTmType | 1.3.6.1.4.1.52.4.1.2.11.1.1.7.1.1.1.9 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory Indicates the type of traffic management used on this VC. other (1) efci (2) er (3)
| ||||
| CsfcsCnxCfgUPCEnable | 1.3.6.1.4.1.52.4.1.2.11.1.1.7.1.1.1.10 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory Indicates whether or not UPC policing is enabled on
this VC. A VC can be bi-directional or uni-directional.
Due to this, the UPC bit is a masking based on directionality.
Where direction is in terms of high interface (H) and low
interface (L). (Where not specified, assume disabled.)
L to H UPC enabled(1)
L to H Tagging enabled(2)
L to H UPC/Tagging enabled(3)
H to L UPC enabled(4)
L to H UPC enabled & H to L UPC enabled(5)
L to H Tagging enabled & H to L UPC enabled(6)
L to H UPC/Tagging enabled & H to L UPC enabled(7)
H to L Tagging enabled(8)
L to H UPC enabled & H to L Tagging enabled(9)
L to H Tagging enabled & H to L Tagging enabled(10)
L to H UPC/Tagging enabled & H to L Tagging enabled(11)
H to L UPC/Tagging enabled(12)
L to H UPC enabled & H to L UPC/Tagging enabled(13)
L to H Tagging enabled and H to L UPC/Tagging enabled(14)
L to H UPC/Tagging enabled & H to L UPC/Tagging enabled(15)
| ||||
| CsfcsCnxCfgStatsEnable | 1.3.6.1.4.1.52.4.1.2.11.1.1.7.1.1.1.11 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory Indicates whether statistics will be kept on this VC. enabled(1) disabled(2) other(3)
| ||||
| CsfcsCnxCfgStatsTableCounterSizes | 1.3.6.1.4.1.52.4.1.2.11.1.1.7.1.1.1.12 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory Indicates the size of the drop counter for this VC. thirtytwobittagcounter (1) thirtytwobitdropcounter (2) sixteenbiteachcounter (3)
| ||||
| CsfcsCnxCfgOwner | 1.3.6.1.4.1.52.4.1.2.11.1.1.7.1.1.1.13 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory Indicates the owner of this cross connect. other(1) own(2) dontown(3)
| ||||
| NsfcsConnectionStatistics | 1.3.6.1.4.1.52.4.1.2.11.1.1.7.2 | |||
| TsfcsCnxStatsTable | 1.3.6.1.4.1.52.4.1.2.11.1.1.7.2.1 | NA | mandatory | |
table · not-accessible · mandatory This table contains the connection configuration information. | ||||
| RsfcsCnxStatsEntry | 1.3.6.1.4.1.52.4.1.2.11.1.1.7.2.1.1 | NA | mandatory | |
row · not-accessible · mandatory Each entry specifies the connection statistics information for the SFCS switch connection instance. | ||||
| CsfcsCnxStatsCrossConnectIndex | 1.3.6.1.4.1.52.4.1.2.11.1.1.7.2.1.1.1 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory A unique value to identify this cross-connect. | ||||
| CsfcsCnxStatsCrossConnectLowIfIndex | 1.3.6.1.4.1.52.4.1.2.11.1.1.7.2.1.1.2 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The value of this object is equal to the low MIB II IfIndex value of the ATM interface port for this cross-connect. | ||||
| CsfcsCnxStatsCrossConnectLowVpi | 1.3.6.1.4.1.52.4.1.2.11.1.1.7.2.1.1.3 | INTEGER (0..4095) | RO | mandatory |
column · INTEGER (0..4095) · read-only · mandatory The value of this object is equal to the low VPI value at the ATM interface associated with the cross-connect that is identified by sfcsCnxStatsCrossConnectIndex. | ||||
| CsfcsCnxStatsCrossConnectLowVci | 1.3.6.1.4.1.52.4.1.2.11.1.1.7.2.1.1.4 | INTEGER (0..65535) | RO | mandatory |
column · INTEGER (0..65535) · read-only · mandatory The value of this object is equal to the low VCI value at the ATM interface associated with this cross-connect that is identified by sfcsCnxStatsCrossConnectIndex. | ||||
| CsfcsCnxStatsCrossConnectHighIfIndex | 1.3.6.1.4.1.52.4.1.2.11.1.1.7.2.1.1.5 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The value of this object is equal to the high MIB II IfIndex value of the ATM interface port for this cross-connect. | ||||
| CsfcsCnxStatsCrossConnectHighVpi | 1.3.6.1.4.1.52.4.1.2.11.1.1.7.2.1.1.6 | INTEGER (0..4095) | RO | mandatory |
column · INTEGER (0..4095) · read-only · mandatory The value of this object is equal to the high VPI value at the ATM interface associated with the cross-connect that is identified by sfcsCnxStatsCrossConnectIndex. | ||||
| CsfcsCnxStatsCrossConnectHighVci | 1.3.6.1.4.1.52.4.1.2.11.1.1.7.2.1.1.7 | INTEGER (0..65535) | RO | mandatory |
column · INTEGER (0..65535) · read-only · mandatory The value of this object is equal to the high VCI value at the ATM interface associated with this cross-connect that is identified by sfcsCnxStatsCrossConnectIndex. | ||||
| CsfcsCnxStatsLoToHiHTxCells | 1.3.6.1.4.1.52.4.1.2.11.1.1.7.2.1.1.8 | OCTET STRING | RO | mandatory |
column · OCTET STRING · read-only · mandatory Indicates the transmitted cell count for this connection. This entry specifies the count from the low port/vpi/vci to the high port/vpi/vci | ||||
| CsfcsCnxStatsLoToHiDroppedCells | 1.3.6.1.4.1.52.4.1.2.11.1.1.7.2.1.1.9 | OCTET STRING | RO | mandatory |
column · OCTET STRING · read-only · mandatory Indicates the dropped cell count for this connection instance. This entry specifies the count from the low port/vpi/vci to the high port/vpi/vci. | ||||
| CsfcsCnxStatsLoToHiTaggedCells | 1.3.6.1.4.1.52.4.1.2.11.1.1.7.2.1.1.10 | OCTET STRING | RO | mandatory |
column · OCTET STRING · read-only · mandatory Indicates the tagged cell count for this connection instance. This entry specifies the count from the low port/vpi/vci to the high port/vpi/vci. | ||||
| CsfcsCnxStatsHiToLoHTxCells | 1.3.6.1.4.1.52.4.1.2.11.1.1.7.2.1.1.11 | OCTET STRING | RO | mandatory |
column · OCTET STRING · read-only · mandatory Indicates the transmitted cell count for this connection. This entry specifies the count from the high port/vpi/vci to the low port/vpi/vci | ||||
| CsfcsCnxStatsHiToLoDroppedCells | 1.3.6.1.4.1.52.4.1.2.11.1.1.7.2.1.1.12 | OCTET STRING | RO | mandatory |
column · OCTET STRING · read-only · mandatory Indicates the dropped cell count for this connection instance. This entry specifies the count from the high port/vpi/vci to the low port/vpi/vci. | ||||
| CsfcsCnxStatsHiToLoTaggedCells | 1.3.6.1.4.1.52.4.1.2.11.1.1.7.2.1.1.13 | OCTET STRING | RO | mandatory |
column · OCTET STRING · read-only · mandatory Indicates the tagged cell count for this connection instance. This entry specifies the count from the high port/vpi/vci to the low port/vpi/vci. | ||||
| NsfcsConnectionError | 1.3.6.1.4.1.52.4.1.2.11.1.1.7.3 | |||
| TsfcsCnxErrorTable | 1.3.6.1.4.1.52.4.1.2.11.1.1.7.3.1 | NA | mandatory | |
table · not-accessible · mandatory This table contains the connection error information supplied by the atmAPI mib. | ||||
| RsfcsCnxErrorEntry | 1.3.6.1.4.1.52.4.1.2.11.1.1.7.3.1.1 | NA | mandatory | |
row · not-accessible · mandatory A list of VCC connection request failures. This table is indexed the same way as the atmVcCrossConnectTable in the AToM mib. | ||||
| CsfcsCnxErrorCode | 1.3.6.1.4.1.52.4.1.2.11.1.1.7.3.1.1.1 | OCTET STRING | RO | mandatory |
column · OCTET STRING · read-only · mandatory Specifies the error reason for failure of the connection setup. 01 fatal_error 02 moe_table_out_of_range 03 moe_mem_not_allocated 04 mem_fetch_double_reqst 05 lo_port_invalid 06 lo_port_locked 07 lo_vpi_invalid 08 lo_vci_invalid 09 hi_port_invalid 10 hi_port_locked 11 hi_vpi_invalid 12 hi_vci_invalid 13 trfc_desc_l2h_invalid 14 trfc_desc_h2l_invalid 15 ccid_invalid 16 ccid_not_assigned 17 atm_api_type_invalid 18 atm_api_verb_invalid 19 pt_to_pt_over_write_reqst 20 pt_reqst_over_mpt_conn 21 mask_table_full 22 duplicate_request 23 moe_table_out_of_memory 24 vpi0_non_term_reqst 25 hardware_out_of_heap 26 tx_conn_table_out_of_mem 27 tx_conn_table_time_out 28 ctm_communication_error 29 connection_table_out_of_sync 30 invalid_connection_entry 31 ctm_resource_alloc_error 32 front_panel_bandwidth_alloc_error 33 ccid_in_use | ||||
| CsfcsCnxErrorTimeStamp | 1.3.6.1.4.1.52.4.1.2.11.1.1.7.3.1.1.2 | TimeTicks | RO | mandatory |
column · TimeTicks · read-only · mandatory Indicates the value of the sysUpTime when this connection request failed. We will support this field only if the element management uses this table. | ||||
| CsfcsCnxErrorRowStatus | 1.3.6.1.4.1.52.4.1.2.11.1.1.7.3.1.1.3 | INTEGER | RW | mandatory |
column · INTEGER · read-write · mandatory The administrative control of this entry. The owner
could delete this entry after reading it, to prevent
this table from growing too big.
other (1)
inactive (2)
active (3)
delete (4)
| ||||
| NsfcsConnectionAPI | 1.3.6.1.4.1.52.4.1.2.11.1.1.8 | |||
| SsfcsCnxAPIEntry | 1.3.6.1.4.1.52.4.1.2.11.1.1.8.1 | INTEGER (1) | RO | mandatory |
scalar · INTEGER (1) · read-only · mandatory The connection API leaf provides a method for contool for creating PVCs. This always returns a value of 0. | ||||
| NsfcsCTM | 1.3.6.1.4.1.52.4.1.2.11.1.1.9 | |||
| NsfcsCTMInterfaceConfig | 1.3.6.1.4.1.52.4.1.2.11.1.1.9.1 | |||
| TsfcsCTMInterfaceConfigTable | 1.3.6.1.4.1.52.4.1.2.11.1.1.9.1.1 | NA | mandatory | |
table · not-accessible · mandatory This table contains the configuration information of each configured SHEMP interface. If SFCS is not configured on a port, than an entry will not exist. | ||||
| RsfcsCTMInterfaceConfigEntry | 1.3.6.1.4.1.52.4.1.2.11.1.1.9.1.1.1 | NA | mandatory | |
row · not-accessible · mandatory Each entry specifies the SFCS configuration for the SFCS switch interface for which the entry exists. | ||||
| CsfcsCTMInterfaceConfigInterfaceIndex | 1.3.6.1.4.1.52.4.1.2.11.1.1.9.1.1.1.1 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The index which specifies which interface we are dealing with. | ||||
| CsfcsCTMInterfaceConfigType | 1.3.6.1.4.1.52.4.1.2.11.1.1.9.1.1.1.2 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory Sets the type of interface access attribute for the SFCS
interfaces. Access ports allow single user or shared
access and perform statisics and control; network ports
are equivalent to trunk ports with no access control;
host management port indicates the (virtual) port to which
the (internal) management agent is attached; host control
port indicates the port to redirect non-management packets.
other(1),
access-port(2),
network-port(3),
host-mgmt-port(4),
host-ctl-port(5)
| ||||
| CsfcsCTMInterfacePeakBufferUseage | 1.3.6.1.4.1.52.4.1.2.11.1.1.9.1.1.1.3 | INTEGER (0..100) | RO | mandatory |
column · INTEGER (0..100) · read-only · mandatory Indicates the number of cells in transmit buffer memory. | ||||
| CsfcsCTMInterfaceConfigNumberOfQueues | 1.3.6.1.4.1.52.4.1.2.11.1.1.9.1.1.1.4 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory Indicates the number of priority queues configured on this interface. | ||||
| CsfcsCTMInterfaceConfigSigStackID | 1.3.6.1.4.1.52.4.1.2.11.1.1.9.1.1.1.5 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory Indicates the user signalling stack ID for this interface. | ||||
| CsfcsCTMInterfaceConfigClocking | 1.3.6.1.4.1.52.4.1.2.11.1.1.9.1.1.1.6 | INTEGER | RW | mandatory |
column · INTEGER · read-write · mandatory The anim clocking source.
one - use the generated-transmit-clock
two - use the channel-recovered-clock
three - use the system-master-clock
four - option not supported by this interface
| ||||
| CsfcsCTMInterfaceConfigNextVPI | 1.3.6.1.4.1.52.4.1.2.11.1.1.9.1.1.1.7 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory Indicates the next vpi for this interface. | ||||
| CsfcsCTMInterfaceConfigNextVCI | 1.3.6.1.4.1.52.4.1.2.11.1.1.9.1.1.1.8 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory Indicates the next vci for this interface. | ||||
| NsfcsCTMInterfaceStatistics | 1.3.6.1.4.1.52.4.1.2.11.1.1.9.2 | |||
| TsfcsCTMInterfaceStatsTable | 1.3.6.1.4.1.52.4.1.2.11.1.1.9.2.1 | NA | mandatory | |
table · not-accessible · mandatory This table contains the cell counts for each SFCS switch interface. | ||||
| RsfcsCTMInterfaceStatsEntry | 1.3.6.1.4.1.52.4.1.2.11.1.1.9.2.1.1 | NA | mandatory | |
row · not-accessible · mandatory Specifies the SFCS cell counts for the SFCS interface for which this entry exists. | ||||
| CsfcsCTMInterfaceStatsInterfaceIndex | 1.3.6.1.4.1.52.4.1.2.11.1.1.9.2.1.1.1 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The index which specifies which interface we are dealing with. | ||||
| CsfcsCTMInterfaceStatsRxErrors | 1.3.6.1.4.1.52.4.1.2.11.1.1.9.2.1.1.2 | OCTET STRING | RO | mandatory |
column · OCTET STRING · read-only · mandatory Indicates the number of receive path lookup invalid and out of range errors. | ||||
| CsfcsCTMInterfaceStatsVPILookupInvalidErrors | 1.3.6.1.4.1.52.4.1.2.11.1.1.9.2.1.1.3 | OCTET STRING | RO | mandatory |
column · OCTET STRING · read-only · mandatory Indicates the number of VPI lookup invalid and out of range errors. | ||||
| CsfcsCTMInterfaceStatsRxCnxLookupInvalidErrors | 1.3.6.1.4.1.52.4.1.2.11.1.1.9.2.1.1.4 | OCTET STRING | RO | mandatory |
column · OCTET STRING · read-only · mandatory Indicates the number of receive connection lookup invalid errors. | ||||
| CsfcsCTMInterfaceStatsRxCellCnt | 1.3.6.1.4.1.52.4.1.2.11.1.1.9.2.1.1.7 | OCTET STRING | RO | mandatory |
column · OCTET STRING · read-only · mandatory Indicates the number of receive cells on this interface. | ||||
| CsfcsCTMInterfaceStatsTxCellCnt | 1.3.6.1.4.1.52.4.1.2.11.1.1.9.2.1.1.8 | OCTET STRING | RO | mandatory |
column · OCTET STRING · read-only · mandatory Indicates the number of transmit cells on this interface. | ||||
| CsfcsCTMInterfaceStatsOverflowDropCellCnt | 1.3.6.1.4.1.52.4.1.2.11.1.1.9.2.1.1.9 | OCTET STRING | RO | mandatory |
column · OCTET STRING · read-only · mandatory Indicates the number of cells that were dropped due to queue overflows. | ||||
| NsfcsCTMQueueConfig | 1.3.6.1.4.1.52.4.1.2.11.1.1.9.3 | |||
| TsfcsCTMQueueConfigTable | 1.3.6.1.4.1.52.4.1.2.11.1.1.9.3.1 | NA | mandatory | |
table · not-accessible · mandatory This table contains the configuration information for all queues on the SFCS. | ||||
| RsfcsCTMQueueConfigEntry | 1.3.6.1.4.1.52.4.1.2.11.1.1.9.3.1.1 | NA | mandatory | |
row · not-accessible · mandatory Each entry specifies the queue information for the SFCS switch for which the entry exists. | ||||
| CsfcsCTMQueueConfigInterfaceIndex | 1.3.6.1.4.1.52.4.1.2.11.1.1.9.3.1.1.1 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The index which specifies which interface we are dealing with. | ||||
| CsfcsCTMQueueConfigQueueIndex | 1.3.6.1.4.1.52.4.1.2.11.1.1.9.3.1.1.2 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The index which specifies which transmit queue we are dealing with. | ||||
| CsfcsCTMQueueConfigQueueSize | 1.3.6.1.4.1.52.4.1.2.11.1.1.9.3.1.1.3 | INTEGER | RW | mandatory |
column · INTEGER · read-write · mandatory Indicates the size of the transmit queue for this queue instance. | ||||
| CsfcsCTMQueueConfigQueueBandwidth | 1.3.6.1.4.1.52.4.1.2.11.1.1.9.3.1.1.4 | INTEGER (0..100) | RW | mandatory |
column · INTEGER (0..100) · read-write · mandatory Indicates the percentage of this interface's bandwidth utilized by this particular queue. | ||||
| CsfcsCTMQueueConfigClpDropThreshold | 1.3.6.1.4.1.52.4.1.2.11.1.1.9.3.1.1.5 | INTEGER (0..100) | RW | mandatory |
column · INTEGER (0..100) · read-write · mandatory Indicates the queue level to start dropping CLP=1 cells for this queue. This level is expressed as the percentage of this queue's size. | ||||
| CsfcsCTMQueueConfigCongestionThreshold | 1.3.6.1.4.1.52.4.1.2.11.1.1.9.3.1.1.6 | INTEGER (0..100) | RW | mandatory |
column · INTEGER (0..100) · read-write · mandatory Indicates the level to consider this queue congested. This level is expressed as the percentage of this queue's size. | ||||
| CsfcsCTMQueueConfigEFCILowThreshold | 1.3.6.1.4.1.52.4.1.2.11.1.1.9.3.1.1.7 | INTEGER (0..100) | RW | mandatory |
column · INTEGER (0..100) · read-write · mandatory Indicates the lower threshold used for EFCI for this queue instance. This level is expressed as the percentage of this queue's size. | ||||
| CsfcsCTMQueueConfigRMThreshold | 1.3.6.1.4.1.52.4.1.2.11.1.1.9.3.1.1.8 | INTEGER (0..100) | RW | mandatory |
column · INTEGER (0..100) · read-write · mandatory Indicates the remote management queue threshold expressed as a percentage of the queue's size. When this level is hit, a management message is sent to the sender notifying it to slow down. | ||||
| NsfcsCTMQueueStatistics | 1.3.6.1.4.1.52.4.1.2.11.1.1.9.4 | |||
| TsfcsCTMQueueStatsTable | 1.3.6.1.4.1.52.4.1.2.11.1.1.9.4.1 | NA | mandatory | |
table · not-accessible · mandatory This table contains the statistics information for all queues on the SFCS. | ||||
| RsfcsCTMQueueStatsEntry | 1.3.6.1.4.1.52.4.1.2.11.1.1.9.4.1.1 | NA | mandatory | |
row · not-accessible · mandatory Each entry specifies the queue information for the SFCS switch for which the entry exists. | ||||
| CsfcsCTMQueueStatsInterfaceIndex | 1.3.6.1.4.1.52.4.1.2.11.1.1.9.4.1.1.1 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The index which specifies which interface we are dealing with. | ||||
| CsfcsCTMQueueStatsQueue | 1.3.6.1.4.1.52.4.1.2.11.1.1.9.4.1.1.2 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The index which specifies which queue we are dealing with. | ||||
| CsfcsCTMQueueStatsTxClpCellsDiscarded | 1.3.6.1.4.1.52.4.1.2.11.1.1.9.4.1.1.3 | OCTET STRING | RO | mandatory |
column · OCTET STRING · read-only · mandatory Indicates the number of cells with CLP=1 that were discarded for this queue instance. | ||||
| CsfcsCTMQueueStatsTxCellsDropped | 1.3.6.1.4.1.52.4.1.2.11.1.1.9.4.1.1.4 | OCTET STRING | RO | mandatory |
column · OCTET STRING · read-only · mandatory Indicates the number of cells that overflowed the buffer for this queue instance. | ||||
| CsfcsCTMQueueStatsQueuePeakLevel | 1.3.6.1.4.1.52.4.1.2.11.1.1.9.4.1.1.5 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory Indicates the peak level since last read for this queue instance. | ||||
| CsfcsCTMQueueStatsTxCellCnt | 1.3.6.1.4.1.52.4.1.2.11.1.1.9.4.1.1.6 | OCTET STRING | RO | mandatory |
column · OCTET STRING · read-only · mandatory Indicates the transmit cell count on a per queue basis. A value of zero indicates not available | ||||
| NsfcsBWMgr | 1.3.6.1.4.1.52.4.1.2.11.1.1.12 | |||
| NsfcsBwNims | 1.3.6.1.4.1.52.4.1.2.11.1.1.12.1 | |||
| TsfcsBwNimsTable | 1.3.6.1.4.1.52.4.1.2.11.1.1.12.1.1 | NA | mandatory | |
table · not-accessible · mandatory This table contains the Nim Oid and the Nim Administrative Status reading functions. | ||||
| RsfcsBwNimsEntry | 1.3.6.1.4.1.52.4.1.2.11.1.1.12.1.1.1 | NA | mandatory | |
row · not-accessible · mandatory Each entry contains a Nim Oid and the Nim Administrative Status.
| ||||
| CsfcsBwNimsIndex | 1.3.6.1.4.1.52.4.1.2.11.1.1.12.1.1.1.1 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory This index specifies which NIM we are dealing with. This reference is in the same format as MIB II's Interface index. | ||||
| CsfcsBwNimsAdminStatus | 1.3.6.1.4.1.52.4.1.2.11.1.1.12.1.1.1.2 | INTEGER | RW | mandatory |
column · INTEGER · read-write · mandatory Indicates the administrative status of this Nim. 10 - Active 20 - Inactive | ||||
| CsfcsBWNimsBuffCount | 1.3.6.1.4.1.52.4.1.2.11.1.1.12.1.1.1.3 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The number of transmit buffers for this NIM | ||||
| CsfcsBWNimsPortCount | 1.3.6.1.4.1.52.4.1.2.11.1.1.12.1.1.1.4 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The number of ports for this NIM | ||||
| CsfcsBWNimsPrioCount | 1.3.6.1.4.1.52.4.1.2.11.1.1.12.1.1.1.5 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The number of priority queues for this NIM | ||||
| NsfcsBwPorts | 1.3.6.1.4.1.52.4.1.2.11.1.1.12.2 | |||
| TsfcsBwPortsTable | 1.3.6.1.4.1.52.4.1.2.11.1.1.12.2.1 | NA | mandatory | |
table · not-accessible · mandatory This table contains the Port Oid, Port Administrative Status and the forward/reverse physical bandwidth reading functions. | ||||
| RsfcsBwPortsEntry | 1.3.6.1.4.1.52.4.1.2.11.1.1.12.2.1.1 | NA | mandatory | |
row · not-accessible · mandatory Each entry contains the Port Oid, Port Administrative Status and the forward/reverse physical bandwidth.
| ||||
| CsfcsBwPortsIndex | 1.3.6.1.4.1.52.4.1.2.11.1.1.12.2.1.1.1 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory This index specifies which Port we are dealing with. This reference is in the same format as MIB II's Interface index. | ||||
| CsfcsBwPortsAdminStatus | 1.3.6.1.4.1.52.4.1.2.11.1.1.12.2.1.1.2 | INTEGER | RW | mandatory |
column · INTEGER · read-write · mandatory Indicates the administrative status of this Port. 10 - Active 20 - Inactive | ||||
| CsfcsBwPortsPhysBwFwd | 1.3.6.1.4.1.52.4.1.2.11.1.1.12.2.1.1.3 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory This is the forward physical bandwidth of the port in cells/sec. | ||||
| CsfcsBwPortsPhysBwRev | 1.3.6.1.4.1.52.4.1.2.11.1.1.12.2.1.1.4 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory This is the reverse physical bandwidth of the port in cells/sec. | ||||
| CsfcsBwPortsZone | 1.3.6.1.4.1.52.4.1.2.11.1.1.12.2.1.1.5 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The range of the current bw operational point for this port. If a value has never been set the value will be -1. | ||||
| CsfcsBwPortsMetric | 1.3.6.1.4.1.52.4.1.2.11.1.1.12.2.1.1.6 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The current bw operational point for this port. If a value has never been set the value will be -1. | ||||
| NsfcsBwPortPools | 1.3.6.1.4.1.52.4.1.2.11.1.1.12.3 | |||
| TsfcsBwPortPoolLimitsTable | 1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.1 | NA | mandatory | |
table · not-accessible · mandatory This table contains | ||||
| RsfcsBwPortPoolLimitsEntry | 1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.1.1 | NA | mandatory | |
row · not-accessible · mandatory Each entry contains | ||||
| CsfcsBwPortPoolLimitsIndex | 1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.1.1.1 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory This index specifies which Port we are dealing with. This reference is in the same format as MIB II's Interface index. | ||||
| CsfcsBwPortPoolLimitsPoolIndex | 1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.1.1.2 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory This index specifies which Pool within Port we are dealing with. This reference is in the same format as MIB II's Interface index. | ||||
| CsfcsBwPortPoolLimitsMaxAllocBwFwd | 1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.1.1.3 | INTEGER | RW | mandatory |
column · INTEGER · read-write · mandatory Upper Limit for BW to be allocated forward direction. It is defaulted to the physical BW and is set by administrative action. Can't be set to a value greater than physical BW | ||||
| CsfcsBwPortPoolLimitsMaxAllocBwRev | 1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.1.1.4 | INTEGER | RW | mandatory |
column · INTEGER · read-write · mandatory Upper Limit for BW to be allocated reverse direction. It is defaulted to the physical BW and is set by administrative action. Can't be set to a value greater than physical BW | ||||
| CsfcsBwPortPoolLimitsBwAllocStrat | 1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.1.1.5 | INTEGER | RW | mandatory |
column · INTEGER · read-write · mandatory Determines which of 3 sets of formulas will be used for computing the amount of variable bandwidth to be allocated. Conservative allocates the full amount of variable bandwidth, Moderate allocates approximately half of the variable bandwidth, Liberal supports very aggressive allocation and should only be used with caution. Conservative is the default. | ||||
| CsfcsBwPortPoolLimitsBwConstant | 1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.1.1.6 | INTEGER | RW | mandatory |
column · INTEGER · read-write · mandatory A ratio used in formulas for computing the amount of variable bandwidth to be allocated. Valid values are 1-255 which is the numerator of a fraction whose fixed denominator is 256. Thus the value 255 is really 255/256 the most conservative value; the value 1 is really 1/256 the most liberal value; the value 128 is really 128/256 or 50%. The default is 50%. | ||||
| CsfcsBwPortPoolLimitsCBRLimitFwd | 1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.1.1.7 | INTEGER | RW | mandatory |
column · INTEGER · read-write · mandatory A ratio used in allocating the allocatable bandwidth among the various Service classes. This value is the amount of the overall allocatable bw that can be allocated to CBR. The values are 1-255. For a more detailed description of value useage see sfcsBwPortPoolLimitsBwConstant. Total of all service classes for a given direction should not exceed 256. (If it has never been set, the value will be -1.) | ||||
| CsfcsBwPortPoolLimitsCBRLimitRev | 1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.1.1.8 | INTEGER | RW | mandatory |
column · INTEGER · read-write · mandatory A ratio used in allocating the allocatable bandwidth among the various Service classes. This value is the amount of the overall allocatable bw that can be allocated to CBR. The values are 1-255. For a more detailed description of value useage see sfcsBwPortPoolLimitsBwConstant. Total of all service classes for a given direction should not exceed 256. (If it has never been set, the value will be -1.) | ||||
| CsfcsBwPortPoolLimitsABRLimitFwd | 1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.1.1.9 | INTEGER | RW | mandatory |
column · INTEGER · read-write · mandatory A ratio used in allocating the allocatable bandwidth among the various Service classes. This value is the amount of the overall allocatable bw that can be allocated to ABR. The values are 1-255. For a more detailed description of value useage see sfcsBwPortPoolLimitsBwConstant. Total of all service classes for a given direction should not exceed 256. (If it has never been set, the value will be -1.) | ||||
| CsfcsBwPortPoolLimitsABRLimitRev | 1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.1.1.10 | INTEGER | RW | mandatory |
column · INTEGER · read-write · mandatory A ratio used in allocating the allocatable bandwidth among the various Service classes. This value is the amount of the overall allocatable bw that can be allocated to ABR. The values are 1-255. For a more detailed description of value useage see sfcsBwPortPoolLimitsBwConstant. Total of all service classes for a given direction should not exceed 256. (If it has never been set, the value will be -1.) | ||||
| CsfcsBwPortPoolLimitsVBRLimitFwd | 1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.1.1.11 | INTEGER | RW | mandatory |
column · INTEGER · read-write · mandatory A ratio used in allocating the allocatable bandwidth among the various Service classes. This value is the amount of the overall allocatable bw that can be allocated to VBR. The values are 1-255. For a more detailed description of value useage see sfcsBwPortPoolLimitsBwConstant. Total of all service classes for a given direction should not exceed 256. (If it has never been set, the value will be -1.) WARNING - Setting this limit to an arbitrarily low value may cause the switch to become inoperable as an SVC switch. PNNI establishes VBR connections for switch to switch communications. If an arbitrarily low limit is established, it may preclude PNNI inter-switch operability. | ||||
| CsfcsBwPortPoolLimitsVBRLimitRev | 1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.1.1.12 | INTEGER | RW | mandatory |
column · INTEGER · read-write · mandatory A ratio used in allocating the allocatable bandwidth among the various Service classes. This value is the amount of the overall allocatable bw that can be allocated to VBR. The values are 1-255. For a more detailed description of value useage see sfcsBwPortPoolLimitsBwConstant. Total of all service classes for a given direction should not exceed 256. (If it has never been set, the value will be -1.) WARNING - Setting this limit to an arbitrarily low value may cause the switch to become inoperable as an SVC switch. PNNI establishes VBR connections for switch to switch communications. If an arbitrarily low limit is established, it may preclude PNNI inter-switch operability. | ||||
| CsfcsBwPortPoolLimitsUBRLimitFwd | 1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.1.1.13 | INTEGER | RW | mandatory |
column · INTEGER · read-write · mandatory A ratio used in allocating the allocatable bandwidth among the various Service classes. This value is the amount of the overall allocatable bw that can be allocated to UBR. The values are 1-255. For a more detailed description of value useage see sfcsBwPortPoolLimitsBwConstant. Total of all service classes for a given direction should not exceed 256. (If it has never been set, the value will be -1.) WARNING - Setting this limit to an arbitrarily low value may cause the switch to become inoperable as an SVC switch. Many internal management functions use UBR connections to establish connections with neighboring switches for keep alive and discovery functions. If an arbitrarily low limit is established, it may preclude SVC inter-switch operability. | ||||
| CsfcsBwPortPoolLimitsUBRLimitRev | 1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.1.1.14 | INTEGER | RW | mandatory |
column · INTEGER · read-write · mandatory A ratio used in allocating the allocatable bandwidth among the various Service classes. This value is the amount of the overall allocatable bw that can be allocated to UBR. The values are 1-255. For a more detailed description of value useage see sfcsBwPortPoolLimitsBwConstant. Total of all service classes for a given direction should not exceed 256. (If it has never been set, the value will be -1.) WARNING - Setting this limit to an arbitrarily low value may cause the switch to become inoperable as an SVC switch. Many internal management functions use UBR connections to establish connections with neighboring switches for keep alive and discovery functions. If an arbitrarily low limit is established, it may preclude SVC inter-switch operability. | ||||
| CsfcsBwPortPoolLimitsUBRConnLimitFwd | 1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.1.1.15 | INTEGER | RW | mandatory |
column · INTEGER · read-write · mandatory A Limit to the number of UBR connections which can be established through this port. The limit applies to both user connections and management connections. The default is no limit. (If it has never been set, the value will be -1.) | ||||
| CsfcsBwPortPoolLimitsUBRConnLimitRev | 1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.1.1.16 | INTEGER | RW | mandatory |
column · INTEGER · read-write · mandatory A Limit to the number of UBR connections which can be established through this port. The limit applies to both user connections and management connections. The default is no limit. (If it has never been set, the value will be -1.) | ||||
| TsfcsBwPortPoolStatTable | 1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.2 | NA | mandatory | |
table · not-accessible · mandatory This table contains | ||||
| RsfcsBwPortPoolStatEntry | 1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.2.1 | NA | mandatory | |
row · not-accessible · mandatory Each entry contains | ||||
| CsfcsBwPortPoolStatsIndex | 1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.2.1.1 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory This index specifies which Port we are dealing with. This reference is in the same format as MIB II's Interface index. | ||||
| CsfcsBwPortPoolStatsPoolIndex | 1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.2.1.2 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory This index specifies which Pool within Port we are dealing with. This reference is in the same format as MIB II's Interface index. | ||||
| CsfcsBwPortPoolStatConnCntFwd | 1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.2.1.3 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The current total number of calls in the forward direction. | ||||
| CsfcsBwPortPoolStatConnCntRev | 1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.2.1.4 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The current total number of calls in the reverse direction. | ||||
| CsfcsBwPortPoolStatAllocBwFwd | 1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.2.1.5 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The current amount of allocated Bw in the forward direction. | ||||
| CsfcsBwPortPoolStatAllocBwRev | 1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.2.1.6 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The current amount of allocated Bw in the reverse direction. | ||||
| CsfcsBwPortPoolStatAvailBwFwd | 1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.2.1.7 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The current amount of available Bw in the forward direction. | ||||
| CsfcsBwPortPoolStatAvailBwRev | 1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.2.1.8 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The current amount of available Bw in the reverse direction. | ||||
| CsfcsBwPortPoolStatPeakBwFwd | 1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.2.1.9 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The peak amount of allocated Bw in the forward direction since the port was initialized OR the switch was reset. | ||||
| CsfcsBwPortPoolStatPeakBwRev | 1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.2.1.10 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The peak amount of allocated Bw in the reverse direction since the port was initialized OR the switch was reset. | ||||
| CsfcsBwPortPoolStatRejConnFwd | 1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.2.1.11 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The number of connections which were rejected because of insufficient forward bandwidth since the port was initialized or the switch was reset last. | ||||
| CsfcsBwPortPoolStatRejConnRev | 1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.2.1.12 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The number of connections which were rejected because of insufficient reverse bandwidth since the port was initialized or the switch was reset last. | ||||
| CsfcsBwPortPoolStatPrevAdverMAXCRFwd | 1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.2.1.13 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The amount of physical forward BW reported to PNNI in the latest reporting period. | ||||
| CsfcsBwPortPoolStatPrevAdverMAXCRRev | 1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.2.1.14 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The amount of physical reverse BW reported to PNNI in the latest reporting period. | ||||
| CsfcsBwPortPoolStatPrevAdverAvailCRFwd | 1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.2.1.15 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The amount of avail forward BW reported to PNNI in the latest reporting period. | ||||
| CsfcsBwPortPoolStatPrevAdverAvailCRRev | 1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.2.1.16 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The amount of avail reverse BW reported to PNNI in the latest reporting period. | ||||
| CsfcsBwPortPoolStatCBRConnCntFwd | 1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.2.1.17 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The number of currently established CBR connections for the forward direction. | ||||
| CsfcsBwPortPoolStatCBRConnCntRev | 1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.2.1.18 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The number of currently established CBR connections for the reverse direction. | ||||
| CsfcsBwPortPoolStatCBRConnRejFwd | 1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.2.1.19 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The number of CBR forward connections rejected since the port was initialized or the switch was reset last. | ||||
| CsfcsBwPortPoolStatCBRConnRejRev | 1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.2.1.20 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The number of CBR reverse connections rejected since the port was initialized or the switch was reset last. | ||||
| CsfcsBwPortPoolStatCBRAllocBwFwd | 1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.2.1.21 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The amount of forward allocated Bw that is CBR service class. | ||||
| CsfcsBwPortPoolStatCBRAllocBwRev | 1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.2.1.22 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The amount of reverse allocated Bw that is CBR service class. | ||||
| CsfcsBwPortPoolStatCBRAggPCRFwd | 1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.2.1.23 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The aggregated forward PCR for all established CBR connections. | ||||
| CsfcsBwPortPoolStatCBRAggPCRRev | 1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.2.1.24 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The aggregated reverse PCR for all established CBR connections. | ||||
| CsfcsBwPortPoolStatCBRPrevAdverMAXCTD | 1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.2.1.25 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The maxCTD for the forward direction reported to PNNI for the last update period for CBR service class. | ||||
| CsfcsBwPortPoolStatCBRPrevAdverCDV | 1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.2.1.26 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The CDV for the forward direction reported to PNNI for the last update period for CBR service class. | ||||
| CsfcsBwPortPoolStatABRConnCntFwd | 1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.2.1.27 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The number of currently established ABR connections for the forward direction. | ||||
| CsfcsBwPortPoolStatABRConnCntRev | 1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.2.1.28 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The number of currently established ABR connections for the reverse direction. | ||||
| CsfcsBwPortPoolStatABRConnRejFwd | 1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.2.1.29 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The number of ABR forward connections rejected since the port was initialized or the switch was reset last. | ||||
| CsfcsBwPortPoolStatABRConnRejRev | 1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.2.1.30 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The number of ABR reverse connections rejected since the port was initialized or the switch was reset last. | ||||
| CsfcsBwPortPoolStatABRAllocBwFwd | 1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.2.1.31 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The amount of forward allocated Bw that is ABR service class. | ||||
| CsfcsBwPortPoolStatABRAllocBwRev | 1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.2.1.32 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The amount of reverse allocated Bw that is ABR service class. | ||||
| CsfcsBwPortPoolStatABRAggPCRFwd | 1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.2.1.33 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The aggregated forward PCR for all established ABR connections. | ||||
| CsfcsBwPortPoolStatABRAggPCRRev | 1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.2.1.34 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The aggregated reverse PCR for all established ABR connections. | ||||
| CsfcsBwPortPoolStatABRPrevAdverMAXCTD | 1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.2.1.35 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The maxCTD for the forward direction reported to PNNI for the last update period for ABR service class. | ||||
| CsfcsBwPortPoolStatABRPrevAdverCDV | 1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.2.1.36 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The CDV for the forward direction reported to PNNI for the last update period for ABR service class. | ||||
| CsfcsBwPortPoolStatVBRConnCntFwd | 1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.2.1.37 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The number of currently established VBR connections for the forward direction. | ||||
| CsfcsBwPortPoolStatVBRConnCntRev | 1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.2.1.38 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The number of currently established VBR connections for the reverse direction. | ||||
| CsfcsBwPortPoolStatVBRConnRejFwd | 1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.2.1.39 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The number of VBR forward connections rejected since the port was initialized or the switch was reset last. | ||||
| CsfcsBwPortPoolStatVBRConnRejRev | 1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.2.1.40 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The number of VBR reverse connections rejected since the port was initialized or the switch was reset last. | ||||
| CsfcsBwPortPoolStatVBRAllocBwFwd | 1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.2.1.41 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The amount of forward allocated Bw that is VBR service class. | ||||
| CsfcsBwPortPoolStatVBRAllocBwRev | 1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.2.1.42 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The amount of reverse allocated Bw that is VBR service class. | ||||
| CsfcsBwPortPoolStatVBRAggPCRFwd | 1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.2.1.43 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The aggregated forward PCR for all established VBR connections. | ||||
| CsfcsBwPortPoolStatVBRAggPCRRev | 1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.2.1.44 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The aggregated reverse PCR for all established VBR connections. | ||||
| CsfcsBwPortPoolStatVBRPrevAdverMAXCTD | 1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.2.1.45 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The maxCTD for the forward direction reported to PNNI for the last update period for VBR service class. | ||||
| CsfcsBwPortPoolStatVBRPrevAdverCDV | 1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.2.1.46 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The CDV for the forward direction reported to PNNI for the last update period for VBR service class. | ||||
| CsfcsBwPortPoolStatUBRConnCntFwd | 1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.2.1.47 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The number of currently established UBR connections for the forward direction. | ||||
| CsfcsBwPortPoolStatUBRConnCntRev | 1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.2.1.48 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The number of currently established UBR connections for the reverse direction. | ||||
| CsfcsBwPortPoolStatUBRConnRejFwd | 1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.2.1.49 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The number of UBR forward connections rejected since the port was initialized or the switch was reset last. | ||||
| CsfcsBwPortPoolStatUBRConnRejRev | 1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.2.1.50 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The number of UBR reverse connections rejected since the port was initialized or the switch was reset last. | ||||
| CsfcsBwPortPoolStatUBRAllocBwFwd | 1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.2.1.51 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The amount of forward allocated Bw that is UBR service class. | ||||
| CsfcsBwPortPoolStatUBRAllocBwRev | 1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.2.1.52 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The amount of reverse allocated Bw that is UBR service class. | ||||
| CsfcsBwPortPoolStatUBRAggPCRFwd | 1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.2.1.53 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The aggregated forward PCR for all established UBR connections. | ||||
| CsfcsBwPortPoolStatUBRAggPCRRev | 1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.2.1.54 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The aggregated reverse PCR for all established UBR connections. | ||||
| CsfcsBwPortPoolStatUBRPrevAdverMAXCTD | 1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.2.1.55 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The maxCTD for the forward direction reported to PNNI for the last update period for UBR service class. | ||||
| CsfcsBwPortPoolStatUBRPrevAdverCDV | 1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.2.1.56 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The CDV for the forward direction reported to PNNI for the last update period for UBR service class. | ||||
| TsfcsBwPortPoolTrapMgmtTable | 1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.3 | NA | mandatory | |
table · not-accessible · mandatory This table contains | ||||
| RsfcsBwPortPoolTrapMgmtEntry | 1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.3.1 | NA | mandatory | |
row · not-accessible · mandatory Each entry contains | ||||
| CsfcsBwPortPoolTrapMgmtIndex | 1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.3.1.1 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory This index specifies which Port we are dealing with. This reference is in the same format as MIB II's Interface index. | ||||
| CsfcsBwPortPoolTrapMgmtPoolIndex | 1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.3.1.2 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory This index specifies which Pool within Port we are dealing with. This reference is in the same format as MIB II's Interface index. (If it has never been set, the value will be -1.) | ||||
| CsfcsBwPortPoolTrapMgmtAllocBwTholdHiFwd | 1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.3.1.3 | INTEGER | RW | mandatory |
column · INTEGER · read-write · mandatory The upper threshold for the Alloc BW fwd trap. When an allocation causes the currently allocated bw to exceed this value the trap is generated. (If it has never been set, the value will be -1.) | ||||
| CsfcsBwPortPoolTrapMgmtAllocBwTholdHiRev | 1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.3.1.4 | INTEGER | RW | mandatory |
column · INTEGER · read-write · mandatory The upper threshold for the Alloc BW rev trap. When an allocation causes the currently allocated bw to exceed this value the trap is generated. (If it has never been set, the value will be -1.) | ||||
| CsfcsBwPortPoolTrapMgmtAllocBwTholdLoFwd | 1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.3.1.5 | INTEGER | RW | mandatory |
column · INTEGER · read-write · mandatory The lower threshold for the Alloc BW fwd trap. When an allocation causes the currently allocated bw be below this value the trap is generated. (If it has never been set, the value will be -1.) | ||||
| CsfcsBwPortPoolTrapMgmtAllocBwTholdLoRev | 1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.3.1.6 | INTEGER | RW | mandatory |
column · INTEGER · read-write · mandatory The lower threshold for the Alloc BW rev trap. When an allocation causes the currently allocated bw be below this value the trap is generated. (If it has never been set, the value will be -1.) | ||||
| CsfcsBwPortPoolTrapMgmtPeakBwTholdFwd | 1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.3.1.7 | INTEGER | RW | mandatory |
column · INTEGER · read-write · mandatory The upper threshold for the Peak BW fwd trap. When an allocation causes the allocated BW to exceed this value the trap is generated. (If it has never been set, the value will be -1.) | ||||
| CsfcsBwPortPoolTrapMgmtPeakBwTholdRev | 1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.3.1.8 | INTEGER | RW | mandatory |
column · INTEGER · read-write · mandatory The upper threshold for the Peak BW rev trap. When an allocation causes the allocated BW to exceed this value the trap is generated. (If it has never been set, the value will be -1.) | ||||
| CsfcsBwPortPoolTrapMgmtHoldDownTime | 1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.3.1.9 | INTEGER | RW | mandatory |
column · INTEGER · read-write · mandatory The time between traps of the same type. If a trap of a particular type is generated for a particular port, another of that type for that port will not be generated until the hold down time has expired. (If it has never been set, the value will be -1.) | ||||
| CsfcsBwPortPoolTrapMgmtCBRConnCntTholdHiFwd | 1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.3.1.10 | INTEGER | RW | mandatory |
column · INTEGER · read-write · mandatory The upper threshold for the CBR connection count Fwd trap. When an allocation causes the CBR connection count to exceed this value, the trap is generated. (If it has never been set, the value will be -1.) | ||||
| CsfcsBwPortPoolTrapMgmtCBRConnCntTholdHiRev | 1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.3.1.11 | INTEGER | RW | mandatory |
column · INTEGER · read-write · mandatory The upper threshold for the CBR connection count Rev trap. When an allocation causes the CBR connection count to exceed this value, the trap is generated. (If it has never been set, the value will be -1.) | ||||
| CsfcsBwPortPoolTrapMgmtCBRConnCntTholdLoFwd | 1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.3.1.12 | INTEGER | RW | mandatory |
column · INTEGER · read-write · mandatory The lower threshold for the CBR connection count Fwd trap. When an allocation causes the CBR connection count to fall below this value, the trap is generated. (If it has never been set, the value will be -1.) | ||||
| CsfcsBwPortPoolTrapMgmtCBRConnCntTholdLoRev | 1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.3.1.13 | INTEGER | RW | mandatory |
column · INTEGER · read-write · mandatory The lower threshold for the CBR connection count Rev trap. When an allocation causes the CBR connection count to fall below this value, the trap is generated. (If it has never been set, the value will be -1.) | ||||
| CsfcsBwPortPoolTrapMgmtCBRAllocBwTholdHiFwd | 1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.3.1.14 | INTEGER | RW | mandatory |
column · INTEGER · read-write · mandatory The upper threshold for the CBR Allocated Bw Fwd trap. When an allocation causes the CBR Allocated Bw to exceed this value, the trap is generated. (If it has never been set, the value will be -1.) | ||||
| CsfcsBwPortPoolTrapMgmtCBRAllocBwTholdHiRev | 1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.3.1.15 | INTEGER | RW | mandatory |
column · INTEGER · read-write · mandatory The upper threshold for the CBR connection count Rev trap. When an allocation causes the CBR connection count to exceed this value, the trap is generated. (If it has never been set, the value will be -1.) | ||||
| CsfcsBwPortPoolTrapMgmtCBRAllocBwTholdLoFwd | 1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.3.1.16 | INTEGER | RW | mandatory |
column · INTEGER · read-write · mandatory The lower threshold for the CBR Allocated Bw Fwd trap. When an allocation causes the CBR Allocated Bw to fall below this value, the trap is generated. (If it has never been set, the value will be -1.) | ||||
| CsfcsBwPortPoolTrapMgmtCBRAllocBwTholdLoRev | 1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.3.1.17 | INTEGER | RW | mandatory |
column · INTEGER · read-write · mandatory The lower threshold for the CBR Allocated Bw Rev trap. When an allocation causes the CBR Allocated Bw to fall below this value, the trap is generated. (If it has never been set, the value will be -1.) | ||||
| CsfcsBwPortPoolTrapMgmtABRConnCntTholdHiFwd | 1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.3.1.18 | INTEGER | RW | mandatory |
column · INTEGER · read-write · mandatory The upper threshold for the ABR connection count Fwd trap. When an allocation causes the ABR connection count to exceed this value, the trap is generated. (If it has never been set, the value will be -1.) | ||||
| CsfcsBwPortPoolTrapMgmtABRConnCntTholdHiRev | 1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.3.1.19 | INTEGER | RW | mandatory |
column · INTEGER · read-write · mandatory The upper threshold for the ABR connection count Rev trap. When an allocation causes the ABR connection count to exceed this value, the trap is generated. (If it has never been set, the value will be -1.) | ||||
| CsfcsBwPortPoolTrapMgmtABRConnCntTholdLoFwd | 1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.3.1.20 | INTEGER | RW | mandatory |
column · INTEGER · read-write · mandatory The lower threshold for the ABR connection count Fwd trap. When an allocation causes the ABR connection count to fall below this value, the trap is generated. (If it has never been set, the value will be -1.) | ||||
| CsfcsBwPortPoolTrapMgmtABRConnCntTholdLoRev | 1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.3.1.21 | INTEGER | RW | mandatory |
column · INTEGER · read-write · mandatory The lower threshold for the ABR connection count Rev trap. When an allocation causes the ABR connection count to fall below this value, the trap is generated. (If it has never been set, the value will be -1.) | ||||
| CsfcsBwPortPoolTrapMgmtABRAllocBwTholdHiFwd | 1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.3.1.22 | INTEGER | RW | mandatory |
column · INTEGER · read-write · mandatory The upper threshold for the ABR Allocated Bw Fwd trap. When an allocation causes the ABR Allocated Bw to exceed this value, the trap is generated. (If it has never been set, the value will be -1.) | ||||
| CsfcsBwPortPoolTrapMgmtABRAllocBwTholdHiRev | 1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.3.1.23 | INTEGER | RW | mandatory |
column · INTEGER · read-write · mandatory The upper threshold for the ABR Allocated Bw Rev trap. When an allocation causes the ABR Allocated Bw to exceed this value, the trap is generated. (If it has never been set, the value will be -1.) | ||||
| CsfcsBwPortPoolTrapMgmtABRAllocBwTholdLoFwd | 1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.3.1.24 | INTEGER | RW | mandatory |
column · INTEGER · read-write · mandatory The lower threshold for the ABR Allocated Bw Fwd trap. When an allocation causes the ABR Allocated Bw to fall below this value, the trap is generated. (If it has never been set, the value will be -1.) | ||||
| CsfcsBwPortPoolTrapMgmtABRAllocBwTholdLoRev | 1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.3.1.25 | INTEGER | RW | mandatory |
column · INTEGER · read-write · mandatory The lower threshold for the ABR Allocated Bw Rev trap. When an allocation causes the ABR Allocated Bw to fall below this value, the trap is generated. (If it has never been set, the value will be -1.) | ||||
| CsfcsBwPortPoolTrapMgmtVBRConnCntTholdHiFwd | 1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.3.1.26 | INTEGER | RW | mandatory |
column · INTEGER · read-write · mandatory The upper threshold for the VBR connection count Fwd trap. When an allocation causes the VBR connection count to exceed this value, the trap is generated. (If it has never been set, the value will be -1.) | ||||
| CsfcsBwPortPoolTrapMgmtVBRConnCntTholdHiRev | 1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.3.1.27 | INTEGER | RW | mandatory |
column · INTEGER · read-write · mandatory The upper threshold for the VBR connection count Rev trap. When an allocation causes the VBR connection count to exceed this value, the trap is generated. (If it has never been set, the value will be -1.) | ||||
| CsfcsBwPortPoolTrapMgmtVBRConnCntTholdLoFwd | 1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.3.1.28 | INTEGER | RW | mandatory |
column · INTEGER · read-write · mandatory The lower threshold for the VBR connection count Fwd trap. When an allocation causes the VBR connection count to fall below this value, the trap is generated. (If it has never been set, the value will be -1.) | ||||
| CsfcsBwPortPoolTrapMgmtVBRConnCntTholdLoRev | 1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.3.1.29 | INTEGER | RW | mandatory |
column · INTEGER · read-write · mandatory The lower threshold for the VBR connection count Rev trap. When an allocation causes the VBR connection count to fall below this value, the trap is generated. (If it has never been set, the value will be -1.) | ||||
| CsfcsBwPortPoolTrapMgmtVBRAllocBwTholdHiFwd | 1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.3.1.30 | INTEGER | RW | mandatory |
column · INTEGER · read-write · mandatory The upper threshold for the VBR Allocated Bw Fwd trap. When an allocation causes the VBR Allocated Bw to exceed this value, the trap is generated. (If it has never been set, the value will be -1.) | ||||
| CsfcsBwPortPoolTrapMgmtVBRAllocBwTholdHiRev | 1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.3.1.31 | INTEGER | RW | mandatory |
column · INTEGER · read-write · mandatory The upper threshold for the VBR Allocated Bw Rev trap. When an allocation causes the VBR Allocated Bw to exceed this value, the trap is generated. (If it has never been set, the value will be -1.) | ||||
| CsfcsBwPortPoolTrapMgmtVBRAllocBwTholdLoFwd | 1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.3.1.32 | INTEGER | RW | mandatory |
column · INTEGER · read-write · mandatory The lower threshold for the VBR Allocated Bw Fwd trap. When an allocation causes the VBR Allocated Bw to fall below this value, the trap is generated. (If it has never been set, the value will be -1.) | ||||
| CsfcsBwPortPoolTrapMgmtVBRAllocBwTholdLoRev | 1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.3.1.33 | INTEGER | RW | mandatory |
column · INTEGER · read-write · mandatory The lower threshold for the VBR Allocated Bw Rev trap. When an allocation causes the VBR Allocated Bw to fall below this value, the trap is generated. (If it has never been set, the value will be -1.) | ||||
| CsfcsBwPortPoolTrapMgmtUBRConnCntTholdHiFwd | 1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.3.1.34 | INTEGER | RW | mandatory |
column · INTEGER · read-write · mandatory The upper threshold for the UBR connection count Fwd trap. When an allocation causes the UBR connection count to exceed this value, the trap is generated. (If it has never been set, the value will be -1.) | ||||
| CsfcsBwPortPoolTrapMgmtUBRConnCntTholdHiRev | 1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.3.1.35 | INTEGER | RW | mandatory |
column · INTEGER · read-write · mandatory The upper threshold for the UBR connection count Rev trap. When an allocation causes the UBR connection count to exceed this value, the trap is generated. (If it has never been set, the value will be -1.) | ||||
| CsfcsBwPortPoolTrapMgmtUBRConnCntTholdLoFwd | 1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.3.1.36 | INTEGER | RW | mandatory |
column · INTEGER · read-write · mandatory The lower threshold for the UBR connection count Fwd trap. When an allocation causes the UBR connection count to fall below this value, the trap is generated. (If it has never been set, the value will be -1.) | ||||
| CsfcsBwPortPoolTrapMgmtUBRConnCntTholdLoRev | 1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.3.1.37 | INTEGER | RW | mandatory |
column · INTEGER · read-write · mandatory The lower threshold for the UBR connection count Rev trap. When an allocation causes the UBR connection count to fall below this value, the trap is generated. (If it has never been set, the value will be -1.) | ||||
| CsfcsBwPortPoolTrapMgmtUBRAllocBwTholdHiFwd | 1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.3.1.38 | INTEGER | RW | mandatory |
column · INTEGER · read-write · mandatory The upper threshold for the UBR Allocated Bw Fwd trap. When an allocation causes the UBR Allocated Bw to exceed this value, the trap is generated. (If it has never been set, the value will be -1.) | ||||
| CsfcsBwPortPoolTrapMgmtUBRAllocBwTholdHiRev | 1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.3.1.39 | INTEGER | RW | mandatory |
column · INTEGER · read-write · mandatory The upper threshold for the UBR Allocated Bw Rev trap. When an allocation causes the UBR Allocated Bw to exceed this value, the trap is generated. (If it has never been set, the value will be -1.) | ||||
| CsfcsBwPortPoolTrapMgmtUBRAllocBwTholdLoFwd | 1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.3.1.40 | INTEGER | RW | mandatory |
column · INTEGER · read-write · mandatory The lower threshold for the UBR Allocated Bw Fwd trap. When an allocation causes the UBR Allocated Bw to fall below this value, the trap is generated. (If it has never been set, the value will be -1.) | ||||
| CsfcsBwPortPoolTrapMgmtUBRAllocBwTholdLoRev | 1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.3.1.41 | INTEGER | RW | mandatory |
column · INTEGER · read-write · mandatory The lower threshold for the UBR Allocated Bw Rev trap. When an allocation causes the UBR Allocated Bw to fall below this value, the trap is generated. (If it has never been set, the value will be -1.) | ||||
| CsfcsBWPortPoolTrapMgmtBuffUpThold | 1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.3.1.42 | INTEGER | RW | mandatory |
column · INTEGER · read-write · mandatory The upper threshold for buffer allocation trap . | ||||
| CsfcsBWPortPoolTrapMgmtBuffLoThold | 1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.3.1.43 | INTEGER | RW | mandatory |
column · INTEGER · read-write · mandatory The lower threshold for buffer allocation trap . | ||||
| CsfcsBWPortPoolTrapMgmtConnRejThold | 1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.3.1.44 | INTEGER | RW | mandatory |
column · INTEGER · read-write · mandatory The lower threshold for conn rejects trap . | ||||
| NsfcsBuffPools | 1.3.6.1.4.1.52.4.1.2.11.1.1.12.4 | |||
| TsfcsBuffPrioTable | 1.3.6.1.4.1.52.4.1.2.11.1.1.12.4.1 | NA | mandatory | |
table · not-accessible · mandatory This table contains the rows of all the buffer pools. | ||||
| RsfcsBuffPrioEntry | 1.3.6.1.4.1.52.4.1.2.11.1.1.12.4.1.1 | NA | mandatory | |
row · not-accessible · mandatory Each entry contains the rows of all the buffer pools. | ||||
| CsfcsBuffPrioPortIndex | 1.3.6.1.4.1.52.4.1.2.11.1.1.12.4.1.1.1 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory This index specifies which port we are dealing with. This reference is in the same format as MIB II's Interface index. | ||||
| CsfcsBuffPrioPriority | 1.3.6.1.4.1.52.4.1.2.11.1.1.12.4.1.1.2 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory This index specifies which priority we are dealing with. | ||||
| CsfcsBuffPrioAssignCtl | 1.3.6.1.4.1.52.4.1.2.11.1.1.12.4.1.1.3 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The status of how assignment is controlled. Static,Manual,Adaptive. | ||||
| CsfcsBuffPrioMinCtl | 1.3.6.1.4.1.52.4.1.2.11.1.1.12.4.1.1.4 | INTEGER | RW | mandatory |
column · INTEGER · read-write · mandatory The minimum number of cells which can be assigned to this port/prioity. | ||||
| CsfcsBuffPrioAssigned | 1.3.6.1.4.1.52.4.1.2.11.1.1.12.4.1.1.5 | INTEGER | RW | mandatory |
column · INTEGER · read-write · mandatory The number of cells which are currently assigned to this port/priority. | ||||
| CsfcsBuffPrioAllocated | 1.3.6.1.4.1.52.4.1.2.11.1.1.12.4.1.1.6 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The number of assigned cells which are currently allocated to VCs for this port/priority. | ||||
| CsfcsBuffPrioAvailable | 1.3.6.1.4.1.52.4.1.2.11.1.1.12.4.1.1.7 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The number of assigned cells which are free to be allocated. | ||||
| CsfcsBuffPrioPeakAlloc | 1.3.6.1.4.1.52.4.1.2.11.1.1.12.4.1.1.8 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The peak number of cells which have been allocated to this port/priority. | ||||
| CsfcsBuffPrioConnRejs | 1.3.6.1.4.1.52.4.1.2.11.1.1.12.4.1.1.9 | INTEGER | RW | mandatory |
column · INTEGER · read-write · mandatory The number of connections rejected because of a lack of buffers. | ||||
| CsfcsBuffPrioUpTholdTrap | 1.3.6.1.4.1.52.4.1.2.11.1.1.12.4.1.1.10 | INTEGER | RW | mandatory |
column · INTEGER · read-write · mandatory The upper threshold of allocations to trigger an upper thold trap. | ||||
| CsfcsBuffPrioLoTholdTrap | 1.3.6.1.4.1.52.4.1.2.11.1.1.12.4.1.1.11 | INTEGER | RW | mandatory |
column · INTEGER · read-write · mandatory The lower threshold of allocations to trigger a lower thold trap. | ||||
| CsfcsBuffPrioConnRejThold | 1.3.6.1.4.1.52.4.1.2.11.1.1.12.4.1.1.12 | INTEGER | RW | mandatory |
column · INTEGER · read-write · mandatory The lower threshold of conn rejects trap because of inadequate buffers. | ||||
| NsfcsProxy | 1.3.6.1.4.1.52.4.1.2.11.1.1.13 | |||
| NsfcsProxyConfig | 1.3.6.1.4.1.52.4.1.2.11.1.1.13.1 | |||
| TsfcsProxyConfigTable | 1.3.6.1.4.1.52.4.1.2.11.1.1.13.1.1 | NA | mandatory | |
table · not-accessible · mandatory This table contains the config info and a port reading function. | ||||
| RsfcsProxyConfigEntry | 1.3.6.1.4.1.52.4.1.2.11.1.1.13.1.1.1 | NA | mandatory | |
row · not-accessible · mandatory Each entry contains ANIM Proxy config info or a function. | ||||
| CsfcsProxyConfigANIMIndex | 1.3.6.1.4.1.52.4.1.2.11.1.1.13.1.1.1.1 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory This index specifies which ANIM Proxy we are dealing with. This reference is in the same format as MIB II's Interface index. | ||||
| CsfcsProxyConfigNUMPORTS | 1.3.6.1.4.1.52.4.1.2.11.1.1.13.1.1.1.2 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory Indicates the number of ports per Proxy which is always 4. | ||||
| CsfcsProxyConfigTxMemSize | 1.3.6.1.4.1.52.4.1.2.11.1.1.13.1.1.1.3 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory Indicates the size of the port's Transmission memory in K. The memory size is always 1K. | ||||
| CsfcsProxyConfigRxMaxPduSize | 1.3.6.1.4.1.52.4.1.2.11.1.1.13.1.1.1.4 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory Indicates the size of the port's Transmission memory in K. The memory size is always 1K. | ||||
| CsfcsProxyConfigBandWidth | 1.3.6.1.4.1.52.4.1.2.11.1.1.13.1.1.1.5 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory Indicates the bandwidth for the port, which is ????? | ||||
| CsfcsProxyConfigTransmitDone | 1.3.6.1.4.1.52.4.1.2.11.1.1.13.1.1.1.6 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory Checks if the Transmission has finished.
| ||||
| CsfcsProxyConfigReceiveFifoState | 1.3.6.1.4.1.52.4.1.2.11.1.1.13.1.1.1.7 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory Checks if the port's receive Fifo is full or not.
| ||||
| CsfcsProxyConfigPortTransmitMode | 1.3.6.1.4.1.52.4.1.2.11.1.1.13.1.1.1.8 | INTEGER | RW | mandatory |
column · INTEGER · read-write · mandatory Controls Transmission of cells in port Transmit memory.
| ||||
| CsfcsProxyConfigReceiveFifoReset | 1.3.6.1.4.1.52.4.1.2.11.1.1.13.1.1.1.9 | INTEGER | WO | mandatory |
column · INTEGER · write-only · mandatory Controls the receive buffer's memory. Reset clears memory. | ||||
| CsfcsProxyConfigTxFifoReset | 1.3.6.1.4.1.52.4.1.2.11.1.1.13.1.1.1.10 | INTEGER | WO | mandatory |
column · INTEGER · write-only · mandatory Controls the port's transmit memory. Reset clears memory. | ||||
| CsfcsProxyConfigReceiveMode | 1.3.6.1.4.1.52.4.1.2.11.1.1.13.1.1.1.11 | INTEGER | RW | mandatory |
column · INTEGER · read-write · mandatory Controls whether or not the port receives cells.
| ||||
| CsfcsProxyConfigCaptureMode | 1.3.6.1.4.1.52.4.1.2.11.1.1.13.1.1.1.12 | INTEGER | RW | mandatory |
column · INTEGER · read-write · mandatory Controls how much of the cell is received.
| ||||
| CsfcsProxyConfigInitPort | 1.3.6.1.4.1.52.4.1.2.11.1.1.13.1.1.1.13 | INTEGER | WO | mandatory |
column · INTEGER · write-only · mandatory Setting this returns the port to the initial setup. | ||||
| CsfcsProxyConfigLoad | 1.3.6.1.4.1.52.4.1.2.11.1.1.13.1.1.1.14 | INTEGER | RW | mandatory |
column · INTEGER · read-write · mandatory Transmit load for port. | ||||
| CsfcsProxyConfigGumbo | 1.3.6.1.4.1.52.4.1.2.11.1.1.13.1.1.1.15 | OCTET STRING | RO | mandatory |
column · OCTET STRING · read-only · mandatory Unreadable octet string used for control information. | ||||
| NsfcsProxyTrans | 1.3.6.1.4.1.52.4.1.2.11.1.1.13.2 | |||
| TsfcsProxyTransTable | 1.3.6.1.4.1.52.4.1.2.11.1.1.13.2.1 | NA | mandatory | |
table · not-accessible · mandatory This table contains the arguments and the function for the Transmit function. | ||||
| RsfcsProxyTransEntry | 1.3.6.1.4.1.52.4.1.2.11.1.1.13.2.1.1 | NA | mandatory | |
row · not-accessible · mandatory The entries are the arguments for the Transmit function. | ||||
| CsfcsProxyTransANIMIndex | 1.3.6.1.4.1.52.4.1.2.11.1.1.13.2.1.1.1 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory This index specifies which ANIM Port we are dealing with. This reference is in the same format as MIB II's Interface Index. | ||||
| CsfcsProxyTransEncodeNewPdu | 1.3.6.1.4.1.52.4.1.2.11.1.1.13.2.1.1.2 | INTEGER | WO | mandatory |
column · INTEGER · write-only · mandatory Setting this encodes a new PDU based on the current PDU parameters into the port's transmit memory. | ||||
| CsfcsProxyTransVPI | 1.3.6.1.4.1.52.4.1.2.11.1.1.13.2.1.1.3 | INTEGER | RW | mandatory |
column · INTEGER · read-write · mandatory This is the VPI for the PDU. | ||||
| CsfcsProxyTransVCI | 1.3.6.1.4.1.52.4.1.2.11.1.1.13.2.1.1.4 | INTEGER | RW | mandatory |
column · INTEGER · read-write · mandatory This is the VCI for the PDU. | ||||
| CsfcsProxyTransPTI | 1.3.6.1.4.1.52.4.1.2.11.1.1.13.2.1.1.5 | INTEGER (0..7) | RW | mandatory |
column · INTEGER (0..7) · read-write · mandatory Payload Type Indicator: the value of the 3 bit Payload Type field in the header. The most signifigant bit indicates user or control data, the next bit indicates congestion, and the last bit indicates AAL encoding. | ||||
| CsfcsProxyTransCLP | 1.3.6.1.4.1.52.4.1.2.11.1.1.13.2.1.1.6 | INTEGER | RW | mandatory |
column · INTEGER · read-write · mandatory The cell loss priority: 1 or 0. | ||||
| CsfcsProxyTransPayloadType | 1.3.6.1.4.1.52.4.1.2.11.1.1.13.2.1.1.7 | INTEGER | RW | mandatory |
column · INTEGER · read-write · mandatory The payload type for the cell.
| ||||
| CsfcsProxyTransPayloadLength | 1.3.6.1.4.1.52.4.1.2.11.1.1.13.2.1.1.8 | INTEGER | RW | mandatory |
column · INTEGER · read-write · mandatory The length of the payload in bytes. | ||||
| CsfcsProxyTransPayloadData | 1.3.6.1.4.1.52.4.1.2.11.1.1.13.2.1.1.9 | OCTET STRING | RW | mandatory |
column · OCTET STRING · read-write · mandatory If the payload type is user input, this is the payload itself. | ||||
| CsfcsProxyTransCount | 1.3.6.1.4.1.52.4.1.2.11.1.1.13.2.1.1.10 | INTEGER | RW | mandatory |
column · INTEGER · read-write · mandatory Number of copies of the pdu to encode in port transmit memory. | ||||
| CsfcsProxyTransPayloadAdaptionLayer | 1.3.6.1.4.1.52.4.1.2.11.1.1.13.2.1.1.11 | INTEGER | RW | mandatory |
column · INTEGER · read-write · mandatory The format of the payload: either raw cells or AAL5.
| ||||
| CsfcsProxyTransMpxMethod | 1.3.6.1.4.1.52.4.1.2.11.1.1.13.2.1.1.12 | INTEGER | RW | mandatory |
column · INTEGER · read-write · mandatory The format of the payload: either raw cells or AAL5. | ||||
| CsfcsProxyTransControl | 1.3.6.1.4.1.52.4.1.2.11.1.1.13.2.1.1.13 | INTEGER | RW | mandatory |
column · INTEGER · read-write · mandatory Controls how many times to send what's in the port's transmit memory.
| ||||
| CsfcsProxyTransGumbo | 1.3.6.1.4.1.52.4.1.2.11.1.1.13.2.1.1.14 | OCTET STRING | RO | mandatory |
column · OCTET STRING · read-only · mandatory Returns the vpi, vci, pti, clp, payload_type, payload_length, count, PAL, mpx method, and control entires for this table in a string where the entries are separated by semicolons. | ||||
| NsfcsProxyRead | 1.3.6.1.4.1.52.4.1.2.11.1.1.13.3 | |||
| TsfcsProxyReadTable | 1.3.6.1.4.1.52.4.1.2.11.1.1.13.3.1 | NA | mandatory | |
table · not-accessible · mandatory This table contains information read from the cells in the receive fifo. | ||||
| RsfcsProxyReadEntry | 1.3.6.1.4.1.52.4.1.2.11.1.1.13.3.1.1 | NA | mandatory | |
row · not-accessible · mandatory The entries are the information about the cells or the PDU. | ||||
| CsfcsProxyReadANIMIndex | 1.3.6.1.4.1.52.4.1.2.11.1.1.13.3.1.1.1 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory This index specifies which ANIM Port we are dealing with. This reference is in the same format as the MIB II Interface Index. | ||||
| CsfcsProxyReadMode | 1.3.6.1.4.1.52.4.1.2.11.1.1.13.3.1.1.2 | INTEGER | RW | mandatory |
column · INTEGER · read-write · mandatory How the receive fifo is read.
| ||||
| CsfcsProxyReadNewPdu | 1.3.6.1.4.1.52.4.1.2.11.1.1.13.3.1.1.3 | INTEGER | WO | mandatory |
column · INTEGER · write-only · mandatory Pops a new Pdu from the receive fifo to be examined and read.
| ||||
| CsfcsProxyReadGumbo | 1.3.6.1.4.1.52.4.1.2.11.1.1.13.3.1.1.4 | OCTET STRING | WO | mandatory |
column · OCTET STRING · write-only · mandatory Unreadable control information. | ||||
| CsfcsProxyReadVPI | 1.3.6.1.4.1.52.4.1.2.11.1.1.13.3.1.1.5 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory This is the VPI for the PDU. | ||||
| CsfcsProxyReadVCI | 1.3.6.1.4.1.52.4.1.2.11.1.1.13.3.1.1.6 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory This is the VCI for the PDU. | ||||
| CsfcsProxyReadPTI | 1.3.6.1.4.1.52.4.1.2.11.1.1.13.3.1.1.7 | INTEGER (0..7) | RO | mandatory |
column · INTEGER (0..7) · read-only · mandatory Payload Type Indicator: the value of the 3 bit Payload Type field in the header. The most signifigant bit indicates user or control data, the next bit indicates congestion, and the last bit indicates AAL encoding. | ||||
| CsfcsProxyReadCLP | 1.3.6.1.4.1.52.4.1.2.11.1.1.13.3.1.1.8 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The cell loss priority: 1 or 0. | ||||
| CsfcsProxyReadDataLength | 1.3.6.1.4.1.52.4.1.2.11.1.1.13.3.1.1.9 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The length of the PDU in bytes. | ||||
| CsfcsProxyReadData | 1.3.6.1.4.1.52.4.1.2.11.1.1.13.3.1.1.10 | OCTET STRING | RO | mandatory |
column · OCTET STRING · read-only · mandatory The actual data of the PDU. | ||||
| CsfcsProxyReadPal | 1.3.6.1.4.1.52.4.1.2.11.1.1.13.3.1.1.11 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The format of the payload: either raw cells or AAL5.
| ||||
| CsfcsProxyReadInbyteslosts | 1.3.6.1.4.1.52.4.1.2.11.1.1.13.3.1.1.12 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The number of bytes that were dropped while reading. Usually because they occurred before the Start of Cell was discovered. | ||||
| CsfcsProxyReadInCells | 1.3.6.1.4.1.52.4.1.2.11.1.1.13.3.1.1.13 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The number of cells read since this port was last reset. | ||||
| CsfcsProxyReadInError | 1.3.6.1.4.1.52.4.1.2.11.1.1.13.3.1.1.14 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The number of pdu's that had to be dropped due to errors. | ||||
| CsfcsProxyReadInCellReadError | 1.3.6.1.4.1.52.4.1.2.11.1.1.13.3.1.1.15 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The number of cells that had to be dropped due to errors. | ||||
| CsfcsProxyReadInHecError | 1.3.6.1.4.1.52.4.1.2.11.1.1.13.3.1.1.16 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The number of cell headers that contained errors. | ||||
| CsfcsProxyReadInTooBigError | 1.3.6.1.4.1.52.4.1.2.11.1.1.13.3.1.1.17 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The number of pdu's that were too large to be received. | ||||
| CsfcsProxyReadInCRCError | 1.3.6.1.4.1.52.4.1.2.11.1.1.13.3.1.1.18 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The number of pdu's that failed the CRC check. | ||||
| CsfcsProxyReadInLengthMismatchError | 1.3.6.1.4.1.52.4.1.2.11.1.1.13.3.1.1.19 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The length stored in the pdu did not match the actual length of the pdu read in. | ||||
| CsfcsProxyReadInTotalCells | 1.3.6.1.4.1.52.4.1.2.11.1.1.13.3.1.1.20 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory Total number of cells read in by the snapshot. | ||||