CTRON-FDDI-FNB-MIB
Enterasys Networks Inc.snmptranslate -m CTRON-FDDI-FNB-MIB -Tpsnmpwalk -v2c -c <community> -m CTRON-FDDI-FNB-MIB <host> 1.3.6.1.4.1.52.4.1.2.5.1.1Imports
| CTRON-MIB-NAMES | ctFDDIFnb |
|---|---|
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
| SNMPv2-SMI | Bits, Counter32, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso |
| SNMPv2-TC | DisplayString, PhysAddress, TEXTUAL-CONVENTION |
OID tree
| Name | OID | Type | Access | Status |
|---|---|---|---|---|
| NctFDDIResource | 1.3.6.1.4.1.52.4.1.2.5.1.1 | |||
| TctFDDIResourceTable | 1.3.6.1.4.1.52.4.1.2.5.1.1.1 | NA | mandatory | |
table · not-accessible · mandatory This table specifies the physical resources associated with the FNB and general FNB operation for a particular module in a particular slot. | ||||
| RctFDDIResourceEntry | 1.3.6.1.4.1.52.4.1.2.5.1.1.1.1 | NA | mandatory | |
row · not-accessible · mandatory Defines a specific physical resource entry | ||||
| CctFDDIResourceSlotID | 1.3.6.1.4.1.52.4.1.2.5.1.1.1.1.1 | INTEGER (1..255) | RO | mandatory |
column · INTEGER (1..255) · read-only · mandatory A specific instance of a slot as defined by chSlotID as defined in the chassis MIB. | ||||
| CctFDDIResourceID | 1.3.6.1.4.1.52.4.1.2.5.1.1.1.1.2 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory A unique index that defines a specific physcial resource for which this relationship exists. The value of this is as defined by chResourceID in the chassis MIB. | ||||
| CctFDDIResourceType | 1.3.6.1.4.1.52.4.1.2.5.1.1.1.1.3 | OBJECT IDENTIFIER | RO | mandatory |
column · OBJECT IDENTIFIER · read-only · mandatory Defines the type of resource. This is the same value as chResourceType in the chassis MIB. | ||||
| CctFDDIResourceNumbInstance | 1.3.6.1.4.1.52.4.1.2.5.1.1.1.1.4 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory This object defines the number of instances of a physical resource. Specific resource instances are physically located from top-to-bottom on a particular module. If there are multiple 'columns' of a resource from the top to the bottom, then the numbering will start from the left side and proceed top-to-bottom in each column. For instance, the first FNB ring will be instance 1 (top in the chassis) while the second FNB ring is instance 2 (below FNB 1 in the backplane). | ||||
| NctFDDINonMux | 1.3.6.1.4.1.52.4.1.2.5.1.2 | |||
| TctFDDINonMuxCapTable | 1.3.6.1.4.1.52.4.1.2.5.1.2.1 | NA | mandatory | |
table · not-accessible · mandatory This table describes all possible capabilities/configurations for all non-muxed FDDI configurations within the chassis. | ||||
| RctFDDINonMuxCapEntry | 1.3.6.1.4.1.52.4.1.2.5.1.2.1.1 | NA | mandatory | |
row · not-accessible · mandatory Describes a particular capability/configuration entry.
| ||||
| CctFDDINMSlot | 1.3.6.1.4.1.52.4.1.2.5.1.2.1.1.1 | INTEGER (1..256) | RO | mandatory |
column · INTEGER (1..256) · read-only · mandatory The slot within the chassis for which this configuration information is defined. | ||||
| CctFDDINMConfigID | 1.3.6.1.4.1.52.4.1.2.5.1.2.1.1.2 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The instance of a particular configuration. | ||||
| CctFDDINMConfig | 1.3.6.1.4.1.52.4.1.2.5.1.2.1.1.3 | DisplayString | RO | mandatory |
column · DisplayString · read-only · mandatory This object defines a specific valid connection
configuration. It will specify the connection state of all
resource instances. If an instance of a resource is
not specified, then it is disconnected.
Each valid configuration is encoded in an ascii string, using
a specified format for interpretation. The connection
specifications are in groups of four where each group defines
a specific connection configuration. The terms of a connection
group is defined as follows:
1st - The resource ID as defined by
ctFDDIResourceID.
2nd - A specific instance of the physical
resource. This will be a value between 1 and
ctFDDIResourceNumbInstance for the particular
resource ID in the first term. If a resource ID
has more than one specific resource instance, but
the whole resource can be connected, then this
term will have the value '0' to signify all instances
of the resource.
3rd - The connection ID for this specific
physical resource. This value is the same as
ctFDDINMConnectionID, and through the
ctFDDINonMuxConnectionTable maps to a specific
instance of SMT and MAC.
For example if the value of this object is '1.1.2.2.1.1',
then it states that resource 1, instance 1 is connected to
connection ID 2 and resource 2, instance 1 is connected to
connection ID 1 and is inserted into its FDDI ring.
If a valid configuration is no connections then this
object will have a value of '0.0.0' | ||||
| CctFDDINMConfigDesc | 1.3.6.1.4.1.52.4.1.2.5.1.2.1.1.4 | DisplayString | RO | mandatory |
column · DisplayString · read-only · mandatory This object contains a textual description of a valid connection configuration. This is a more user-friendly representation of the configuration than the ctFDDINMConfig object. | ||||
| TctFDDINonMuxCapEnableTable | 1.3.6.1.4.1.52.4.1.2.5.1.2.2 | NA | mandatory | |
table · not-accessible · mandatory This table describes the currently enabled configuration for each module. | ||||
| RctFDDINonMuxCapEnableEntry | 1.3.6.1.4.1.52.4.1.2.5.1.2.2.1 | NA | mandatory | |
row · not-accessible · mandatory Describes a specific configuration enable entry.
| ||||
| CctFDDINMEnableSlot | 1.3.6.1.4.1.52.4.1.2.5.1.2.2.1.1 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory A specific slot for which this configuration enable pertains. | ||||
| CctFDDINMCapEnable | 1.3.6.1.4.1.52.4.1.2.5.1.2.2.1.2 | INTEGER | RW | mandatory |
column · INTEGER · read-write · mandatory A specific configuration that is enabled. Enabling a configuration is done by writing the value of ctFDDINMConfigID for a specific configuration to this object. This object, when read, will return the value of ctFDDINMConfigID for the presently enabled configuration. | ||||
| TctFDDINonMuxConnectionTable | 1.3.6.1.4.1.52.4.1.2.5.1.2.3 | NA | mandatory | |
table · not-accessible · mandatory This table defines specific information for each defined FDDI/FNB connection. This maps the third sub identifier of ctFDDINMConfig to a particular SMT and MAC instance in the 1512 FDDI MIB. | ||||
| RctFDDINonMuxConnectionEntry | 1.3.6.1.4.1.52.4.1.2.5.1.2.3.1 | NA | mandatory | |
row · not-accessible · mandatory Defines a specific configuration connection entry. | ||||
| CctFDDINMConnectionSlot | 1.3.6.1.4.1.52.4.1.2.5.1.2.3.1.1 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory A specific slot for which this connection entry is defined. | ||||
| CctFDDINMConnectionID | 1.3.6.1.4.1.52.4.1.2.5.1.2.3.1.2 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory Describes a specific connection identifier. Valid connection identifiers are defined by the third sub-identifier in ctFDDINMConfig as identified by ctFDDINMCapEnable. | ||||
| CctFDDINMSMT | 1.3.6.1.4.1.52.4.1.2.5.1.2.3.1.3 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory A specific instance of SMT for which this entry pertains. | ||||
| CctFDDINMMAC | 1.3.6.1.4.1.52.4.1.2.5.1.2.3.1.4 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory A specific MAC that this connection entry pertains. | ||||
| CctFDDINMBytes | 1.3.6.1.4.1.52.4.1.2.5.1.2.3.1.5 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The bandwidth utilization in bytes per second. | ||||
| CctFDDINMFrames | 1.3.6.1.4.1.52.4.1.2.5.1.2.3.1.6 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The bandwidth utilization in frames per second. | ||||
| TctFDDINonMuxInterfaceTable | 1.3.6.1.4.1.52.4.1.2.5.1.2.4 | NA | mandatory | |
table · not-accessible · mandatory This table describs the number of interfaces defined by each non multiplexing FDDI FNB module. | ||||
| RctFDDINonMuxInterfaceEntry | 1.3.6.1.4.1.52.4.1.2.5.1.2.4.1 | NA | mandatory | |
row · not-accessible · mandatory A specfic non multiplexing module interface definition.
| ||||
| CctFDDINMInterSlot | 1.3.6.1.4.1.52.4.1.2.5.1.2.4.1.1 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory A specific slot for which this inteface entry is defined. | ||||
| CctFDDINMNumbInterfaces | 1.3.6.1.4.1.52.4.1.2.5.1.2.4.1.2 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The number of interfaces defined on this particular module. | ||||
| NctFDDIMux | 1.3.6.1.4.1.52.4.1.2.5.1.3 | |||
| TctFDDIMuxCapTable | 1.3.6.1.4.1.52.4.1.2.5.1.3.1 | NA | mandatory | |
table · not-accessible · mandatory This table describes all possible configuration/capabilities defined for a FDDI multiplexing module. | ||||
| RctFDDIMuxCapEntry | 1.3.6.1.4.1.52.4.1.2.5.1.3.1.1 | NA | mandatory | |
row · not-accessible · mandatory Describes a specfic FDDI multiplexor capability/configuration entry.
| ||||
| CctFDDIMuxSlot | 1.3.6.1.4.1.52.4.1.2.5.1.3.1.1.1 | INTEGER (1..256) | RO | mandatory |
column · INTEGER (1..256) · read-only · mandatory Defines the slot within the chassis for which this multiplexed capability/configuration entry pertains. | ||||
| CctFDDIMuxConfigID | 1.3.6.1.4.1.52.4.1.2.5.1.3.1.1.2 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The instance of a particular configuration. | ||||
| CctFDDIMuxConfig | 1.3.6.1.4.1.52.4.1.2.5.1.3.1.1.3 | DisplayString | RO | mandatory |
column · DisplayString · read-only · mandatory This object defines a specific valid connection
configuration. It will specify the connection state of all
resource instances. If an instance of a resource is
not specified, then it is disconnected.
Each valid configuration is encoded in an ascii string, using
a specified format for interpretation. The specific
connections are in groups of four where each group defines a
specific connection configuration. The terms of the connection
group are defined as follows:
1st - Resource ID. The value is the same as
ctFDDIResourceID for a specific resource entry.
2nd - Instance of the resource. This has a value in
the range of 1 to ctFDDIResourceNumbInstance.
3rd - Path of the resource as input to the
multiplexor. Paths are specified as 1
for the primary ring and 2 for the secondary.
4th - This is the multiplexor output channel
that this resource comes out of the multiplexor.
This value is the same as a value of ctFDDIMuxOutID.
5th - Ring Connectivity. This sub-identifier
describes if the given mux-in resource
(sub-identifiers 1-3) is inserted into the backplane
FNB ring. Valid values are 0 for no 1 for yes.
So for example a value of 1.1.1.1.0.2.2.2.2.1 is resource 1,
instance 1 (primary) is on mux-out 1 and it's not inserted;
resource 2, instance 2 (secondary) is on mux-out 2 and
is inserted into the backplane.
If a valid configuration is no connections then this
object will have a value of '0.0.0.0.0' | ||||
| CctFDDIMuxConfigDesc | 1.3.6.1.4.1.52.4.1.2.5.1.3.1.1.4 | DisplayString | RO | mandatory |
column · DisplayString · read-only · mandatory This object contains a textual description of a valid connection configuration. This is a more user-friendly representation of the configuration than the ctFDDIMuxConfig object. | ||||
| TctFDDIMuxCapEnableTable | 1.3.6.1.4.1.52.4.1.2.5.1.3.2 | NA | mandatory | |
table · not-accessible · mandatory This table describes the currently enabled configuration for each module. | ||||
| RctFDDIMuxCapEnableEntry | 1.3.6.1.4.1.52.4.1.2.5.1.3.2.1 | NA | mandatory | |
row · not-accessible · mandatory Describes a specific configuration enable entry.
| ||||
| CctFDDIMuxEnableSlot | 1.3.6.1.4.1.52.4.1.2.5.1.3.2.1.1 | INTEGER (1..256) | RO | mandatory |
column · INTEGER (1..256) · read-only · mandatory A specific slot for which this configuration enable pertains. | ||||
| CctFDDIMuxCapEnable | 1.3.6.1.4.1.52.4.1.2.5.1.3.2.1.2 | INTEGER | RW | mandatory |
column · INTEGER · read-write · mandatory A specific instance of the configuration that is enabled. Setting this object with a specific value of ctFDDIMuxConfigID enabled that configuration. A request of the value of this object will return the value of ctFDDIMuxConfigID for the presently enabled configuration. | ||||
| CctFDDIMuxMasterPortAssignmentChange | 1.3.6.1.4.1.52.4.1.2.5.1.3.2.1.3 | Counter | RO | mandatory |
column · Counter · read-only · mandatory Depicts the number of changes to the master port to multiplexor output mapping. | ||||
| TctFDDIMuxOutTable | 1.3.6.1.4.1.52.4.1.2.5.1.3.3 | NA | mandatory | |
table · not-accessible · mandatory Describes the multiplexor outputs for each of the FNB multiplexor modules. This maps the multiplexor output to a specific instance of MAC and SMT in the FDDI MIB. | ||||
| RctFDDIMuxOutEntry | 1.3.6.1.4.1.52.4.1.2.5.1.3.3.1 | NA | mandatory | |
row · not-accessible · mandatory Describes a particular multiplexor output. | ||||
| CctFDDIMuxOutSlot | 1.3.6.1.4.1.52.4.1.2.5.1.3.3.1.1 | INTEGER (1..255) | RO | mandatory |
column · INTEGER (1..255) · read-only · mandatory The given slot for which this multiplexor output information pertains. | ||||
| CctFDDIMuxOutID | 1.3.6.1.4.1.52.4.1.2.5.1.3.3.1.2 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The specific instance of the multiplexor output. Instances of this object are used by the values of ctFDDIMuxConfig. | ||||
| CctFDDIMuxOutMACIndex | 1.3.6.1.4.1.52.4.1.2.5.1.3.3.1.3 | INTEGER (1..65535) | RO | mandatory |
column · INTEGER (1..65535) · read-only · mandatory The MAC instance of this multiplexor output. If this this object has a value greater than 0, then this value is the same as fddimibMACIndex. If this object has the value of 0, the given mux-out does not have a MAC. | ||||
| CctFDDIMuxOutSMTIndex | 1.3.6.1.4.1.52.4.1.2.5.1.3.3.1.4 | INTEGER (1..65535) | RO | mandatory |
column · INTEGER (1..65535) · read-only · mandatory Identifies the instance of SMT as defined within the FDDI MIB. | ||||
| CctFDDIMuxBytes | 1.3.6.1.4.1.52.4.1.2.5.1.3.3.1.5 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The bandwidth utilization in bytes per second. | ||||
| CctFDDIMuxFrames | 1.3.6.1.4.1.52.4.1.2.5.1.3.3.1.6 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The bandwidth utilization in frames per second. | ||||
| TctFDDIMuxMasterPortTable | 1.3.6.1.4.1.52.4.1.2.5.1.3.4 | NA | mandatory | |
table · not-accessible · mandatory A list of entries that define master ports as they are defined for the given multiplexed FDDI connection. | ||||
| RctFDDIMuxMasterPortEntry | 1.3.6.1.4.1.52.4.1.2.5.1.3.4.1 | NA | mandatory | |
row · not-accessible · mandatory A specific FDDI-FNB multiplexed master port definition. | ||||
| CctFDDIMuxMasterPortSlotID | 1.3.6.1.4.1.52.4.1.2.5.1.3.4.1.1 | INTEGER (1..255) | RO | mandatory |
column · INTEGER (1..255) · read-only · mandatory A specific instance of a slot as defined by chSlotID. | ||||
| CctFDDIMuxMasterPortID | 1.3.6.1.4.1.52.4.1.2.5.1.3.4.1.2 | INTEGER (1..65535) | RO | mandatory |
column · INTEGER (1..65535) · read-only · mandatory A unique identifier for this specific master port. | ||||
| CctFDDIMuxMasterPortAssignment | 1.3.6.1.4.1.52.4.1.2.5.1.3.4.1.3 | INTEGER | RW | mandatory |
column · INTEGER · read-write · mandatory Provides the masterport to multiplexor output mapping. This is as defined by ctFDDIMuxOutMacAssignment. | ||||
| CctFDDIMuxMasterPortIndex | 1.3.6.1.4.1.52.4.1.2.5.1.3.4.1.4 | INTEGER (1..65535) | RO | mandatory |
column · INTEGER (1..65535) · read-only · mandatory Defines a specific port within the FDDI MIBs fddimibPORTTable. | ||||
| NctFDDISerialConfig | 1.3.6.1.4.1.52.4.1.2.5.1.4 | |||
| SctFDDINumbModules | 1.3.6.1.4.1.52.4.1.2.5.1.4.1 | INTEGER (0..14) | RO | mandatory |
scalar · INTEGER (0..14) · read-only · mandatory Describes the number of modules that are present configurable thru the serial control portion of this MIB. This directly reflects the number of rows found within the ctFDDISerialConfigTable. | ||||
| TctFDDISerialConfigTable | 1.3.6.1.4.1.52.4.1.2.5.1.4.2 | NA | mandatory | |
table · not-accessible · mandatory This table describes the adminstrative control over each of the FNB serial control modules. | ||||
| RctFDDISerialConfigEntry | 1.3.6.1.4.1.52.4.1.2.5.1.4.2.1 | NA | mandatory | |
row · not-accessible · mandatory Describes the controls over a single FNB serial control entry.
| ||||
| CctFDDISerialSlotID | 1.3.6.1.4.1.52.4.1.2.5.1.4.2.1.1 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory Defines the slot that this FNB serial control module is in. This is an instance of chSlotID as defined in the chassis MIB. | ||||
| CctFDDISerialAdminStatus | 1.3.6.1.4.1.52.4.1.2.5.1.4.2.1.2 | INTEGER | RW | mandatory |
column · INTEGER · read-write · mandatory Describes the adminstrative desired state for this FNB
serial control module.
insertFNB1(1) - The serial controlled module should be
inserted into FNB-1 and bypass FNB-2.
insertFNB2(2) - The serial contolled module should be
inserted into FNB-2 and bypass FNB-1.
insertFNB1FNB2(3) - Insert the serial controlled module
on both FNBs.
bypass(4) - Bypass the connection to both FNBs.
hwControlFNB1(5) - Use hardware settings for FNB-1.
hwControlFNB2(6) - Use hardware settings for FNB-2.
hwControl(7) - Use the hardware settings for both
FNBs.
| ||||
| CctFDDISerialOperStatus | 1.3.6.1.4.1.52.4.1.2.5.1.4.2.1.3 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory Describes the operational status of this FDDI serial
controlled module.
insertFNB1(1) - The serial controlled module is
inserted into FNB-1 and bypassed from FNB-2.
insertFNB2(2) - The serial controlled module is
bypassed from FNB-1 and inserted into FNB-2.
insertFNB1FNB2(3) - The serial controlled module is
inserted into both FNB-1 and FNB-2.
bypass(4) - The serial controlled module is bypassed
from both FNB-1 and FNB-2.
| ||||
| TctFDDIModuleFPIMTable | 1.3.6.1.4.1.52.4.1.2.5.1.4.3 | NA | mandatory | |
table · not-accessible · mandatory This table describes the FPIMs that are on the front panel of each FDDI serial control module, if that module supports FPIMs. | ||||
| RctFDDIModuleFPIMEntry | 1.3.6.1.4.1.52.4.1.2.5.1.4.3.1 | NA | mandatory | |
row · not-accessible · mandatory Describes a single FDDI FPIM on a module.
| ||||
| CctFddiFPIMSlotID | 1.3.6.1.4.1.52.4.1.2.5.1.4.3.1.1 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory Defines the slot in which this module exists. This is an instance of chSlotID as found in the chassis MIB. | ||||
| CctFddiFPIM | 1.3.6.1.4.1.52.4.1.2.5.1.4.3.1.2 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory Defines the instance of the port for which this definition is made. Ports are physically located from top-to-bottom on a particular module. If there are multiple 'columns' of ports from the top to the bottom, then the numbering will start from the left side and proceed top-to-bottom in each column. | ||||
| CctFddiFPIMStatus | 1.3.6.1.4.1.52.4.1.2.5.1.4.3.1.4 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory Describes the link status of the given FPIM. A value of link(1) states that a link is present. A value of noLink(2) states that no link is present. A value of notSupported(3) means that link status is not supported by this port and is unknown.
| ||||
| CctFddiFPIMType | 1.3.6.1.4.1.52.4.1.2.5.1.4.3.1.5 | OBJECT IDENTIFIER | RO | mandatory |
column · OBJECT IDENTIFIER · read-only · mandatory Describes the type of FPIM as found in ctron-oids. | ||||