CTRON-ETWMIM-MIB
Enterasys Networks Inc.snmptranslate -m CTRON-ETWMIM-MIB -Tpsnmpwalk -v2c -c <community> -m CTRON-ETWMIM-MIB <host> 1.3.6.1.4.1.52.4.1.1.4.1.1Imports
| CTRON-MIB-NAMES | ctPModuleETWMIM |
|---|---|
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
| SNMPv2-SMI | Bits, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso |
| SNMPv2-TC | DisplayString, PhysAddress, TEXTUAL-CONVENTION |
OID tree
| Name | OID | Type | Access | Status |
|---|---|---|---|---|
| SetwDbExist | 1.3.6.1.4.1.52.4.1.1.4.1.1 | INTEGER | RO | mandatory |
scalar · INTEGER · read-only · mandatory Denotes whether a T1 daughter board is attached to the Etwmim card being managed
| ||||
| SetwDbEnabled | 1.3.6.1.4.1.52.4.1.1.4.1.2 | INTEGER | RW | mandatory |
scalar · INTEGER · read-write · mandatory This object exists if etwDbExist is 1. Setting this object to 1 will cause the WAN port to use the daughterboard T1 port. Setting this object to 2 will cause the WAN port to use the synchronous port
| ||||
| SetwDbFracToggle | 1.3.6.1.4.1.52.4.1.1.4.1.3 | INTEGER | RW | mandatory |
scalar · INTEGER · read-write · mandatory This object exists if etwDbExist is 1. Setting this object to 1 will cause the T1 fractional table to be updated with the new values, as entered. Setting this object to 2, will cause the T1 fractional table to be the table as it is being entered. Setting this object to 3, will cause the T1 fractional table to be the table that is currently in use, regardless of any changes being entered. Setting this object to 4, will cause any changes that have been made to the fractional table since the last update-table to be deleted.
| ||||
| SetwFWRev | 1.3.6.1.4.1.52.4.1.1.4.1.4 | OCTET STRING (SIZE (8)) | RO | mandatory |
scalar · OCTET STRING (SIZE (8)) · read-only · mandatory Denotes the revision of firmware in the module. The format of the string is xx.xx.xx, where the first pair indicates version, and the second pair indicates revision. | ||||
| SetwHWRev | 1.3.6.1.4.1.52.4.1.1.4.1.5 | INTEGER | RO | mandatory |
scalar · INTEGER · read-only · mandatory Denotes the revision of hardware. | ||||
| SetwEpimEnabled | 1.3.6.1.4.1.52.4.1.1.4.1.6 | INTEGER | RO | mandatory |
scalar · INTEGER · read-only · mandatory This object gives the status of the EPIM port on the etwmim. A value of 1 indicates that the hardware has been set to use the Epim port for the ethernet connection. A value of 2 indicates that the hardware has been set to use the A channel for the ethernet connection
| ||||
| SetwEpimType | 1.3.6.1.4.1.52.4.1.1.4.1.7 | OBJECT IDENTIFIER | RO | mandatory |
scalar · OBJECT IDENTIFIER · read-only · mandatory Identifies the type of EPIM that is present in the EPIM slot. The value is allocated in the Ctron naming tree. | ||||
| SetwEpimLink | 1.3.6.1.4.1.52.4.1.1.4.1.8 | INTEGER | RO | mandatory |
scalar · INTEGER · read-only · mandatory This object will indicate whether a link is established on the EPIM link. A value of 1 indicates that a link is established. A value of 2 indicates that a link is not established. A value of 3 indicates that the status of the link is unknown or not valid for the type of Epim installed.
| ||||
| SetwClearNvramOnBoot | 1.3.6.1.4.1.52.4.1.1.4.1.9 | INTEGER | RW | mandatory |
scalar · INTEGER · read-write · mandatory When set to a 1, the system will clear all persistant objects, except for the download objects, from nvram on the next system boot | ||||