CTRON-ENVIRONMENT-MIB
Enterasys Networks Inc.snmptranslate -m CTRON-ENVIRONMENT-MIB -Tpsnmpwalk -v2c -c <community> -m CTRON-ENVIRONMENT-MIB <host> 1.3.6.1.4.1.52.4.1.1.8.1Imports
| CTRON-MIB-NAMES | ctenv |
|---|---|
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
| SNMPv2-SMI | Bits, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso |
| SNMPv2-TC | DisplayString, PhysAddress, TEXTUAL-CONVENTION |
OID tree
| Name | OID | Type | Access | Status |
|---|---|---|---|---|
| NchEnv | 1.3.6.1.4.1.52.4.1.1.8.1 | |||
| SchEnvAmbientTemp | 1.3.6.1.4.1.52.4.1.1.8.1.1 | INTEGER | RO | mandatory |
scalar · INTEGER · read-only · mandatory The ambient temperature of the room in which the chassis is located. If this sensor is broken or not supported, then this object will be set to zero. The value of this object is the actual temperature in degrees Fahrenheit * 10. | ||||
| SchEnvAmbientStatus | 1.3.6.1.4.1.52.4.1.1.8.1.2 | INTEGER | RO | mandatory |
scalar · INTEGER · read-only · mandatory This object reflects the status of the ambient temperature reading.
| ||||
| SchEnvHumidity | 1.3.6.1.4.1.52.4.1.1.8.1.3 | INTEGER | RO | mandatory |
scalar · INTEGER · read-only · mandatory The humidity value of the air flowing thru the chassis. The value of this object is the actual humidity * 10. | ||||
| SchEnvHumidityStatus | 1.3.6.1.4.1.52.4.1.1.8.1.4 | INTEGER | RO | mandatory |
scalar · INTEGER · read-only · mandatory This object reflects the status of the ambient humidity reading.
| ||||
| SchEnvAmbientHot | 1.3.6.1.4.1.52.4.1.1.8.1.5 | INTEGER | RO | mandatory |
scalar · INTEGER · read-only · mandatory The temperature value above which the ambient temperature is deemed to be hot. | ||||
| SchEnvAmbientWarm | 1.3.6.1.4.1.52.4.1.1.8.1.6 | INTEGER | RO | mandatory |
scalar · INTEGER · read-only · mandatory The temperature value above which the ambient temperature is deemed to be warm, if it is below or equal the hot value. | ||||
| SchEnvAmbientCool | 1.3.6.1.4.1.52.4.1.1.8.1.7 | INTEGER | RO | mandatory |
scalar · INTEGER · read-only · mandatory The temperature value below which the ambient temperature is deemed to be cool, if it is above or equal the cold value. | ||||
| SchEnvAmbientCold | 1.3.6.1.4.1.52.4.1.1.8.1.8 | INTEGER | RO | mandatory |
scalar · INTEGER · read-only · mandatory The temperature value below which the ambient temperature is deemed to be cold. | ||||
| SchEnvHumidityMoist | 1.3.6.1.4.1.52.4.1.1.8.1.9 | INTEGER | RO | mandatory |
scalar · INTEGER · read-only · mandatory The humidity value above which the chassis humidity is deemed to be moist. | ||||
| SchEnvHumidityDry | 1.3.6.1.4.1.52.4.1.1.8.1.10 | INTEGER | RO | mandatory |
scalar · INTEGER · read-only · mandatory The humidity value below which the chassis humidity is deemed to be a static risk. | ||||
| SchEnvNumFans | 1.3.6.1.4.1.52.4.1.1.8.1.11 | INTEGER (0..64) | RO | mandatory |
scalar · INTEGER (0..64) · read-only · mandatory Number of fans in a chassis. | ||||
| TchEnvFanTable | 1.3.6.1.4.1.52.4.1.1.8.1.12 | NA | mandatory | |
table · not-accessible · mandatory A list of fans installed in this chassis. | ||||
| RchEnvFanEntry | 1.3.6.1.4.1.52.4.1.1.8.1.12.1 | NA | mandatory | |
row · not-accessible · mandatory A slot entry containing objects for a particular module.
| ||||
| CchEnvFanID | 1.3.6.1.4.1.52.4.1.1.8.1.12.1.1 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory A unique value, in the range between 1 and and the value of chEnvNumFans. | ||||
| CchEnvFanStatus | 1.3.6.1.4.1.52.4.1.1.8.1.12.1.2 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory This object reflects the status of the chassis fan.
| ||||
| CchEnvFanAdmin | 1.3.6.1.4.1.52.4.1.1.8.1.12.1.3 | INTEGER | RW | mandatory |
column · INTEGER · read-write · mandatory This object is used to select the operational mode of the fan. If the value is set to 1 (auto) then fan speed is based on temperature. If the value is set to 3 (testing) then value will return to it's previous value prior to being set at 3.
| ||||
| CchEnvFanSpeed | 1.3.6.1.4.1.52.4.1.1.8.1.12.1.4 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The fan speed expressed as a percentage of the maximum fan speed. | ||||
| NboardEnv | 1.3.6.1.4.1.52.4.1.1.8.2 | |||
| TboardEnvSlotTable | 1.3.6.1.4.1.52.4.1.1.8.2.1 | NA | mandatory | |
table · not-accessible · mandatory A list of networking modules installed in this chassis. | ||||
| RboardEnvSlotEntry | 1.3.6.1.4.1.52.4.1.1.8.2.1.1 | NA | mandatory | |
row · not-accessible · mandatory A slot entry containing objects for a particular module.
| ||||
| CboardEnvSlotID | 1.3.6.1.4.1.52.4.1.1.8.2.1.1.1 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The slot number of a chassis slot in which this board is installed. This object is similiar to chSlotID in the Chassis MIB. | ||||
| CboardEnvTemp | 1.3.6.1.4.1.52.4.1.1.8.2.1.1.2 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The temperature of the networking board. If this sensor is broken or not supported, then this object will be set to zero. The temperature is in degrees Fahrenheit * 10. | ||||
| CboardEnvTempStatus | 1.3.6.1.4.1.52.4.1.1.8.2.1.1.3 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory This object reflects the status of the board temperature reading.
| ||||
| CboardEnvTempRelStatus | 1.3.6.1.4.1.52.4.1.1.8.2.1.1.4 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory This object reflects the status of the board temperature reading relative to the ambient temperature.
| ||||
| CboardEnvShutdownAdmin | 1.3.6.1.4.1.52.4.1.1.8.2.1.1.5 | INTEGER | RW | mandatory |
column · INTEGER · read-write · mandatory This object enables or disables the auto shutdown due to a temperature condition.
| ||||
| CboardEnvTempHot | 1.3.6.1.4.1.52.4.1.1.8.2.1.1.6 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The temperature value above which the board temperature is deemed to be hot. | ||||
| CboardEnvTempWarm | 1.3.6.1.4.1.52.4.1.1.8.2.1.1.7 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The temperature value above which the board temperature is deemed to be warm, if it is below or equal the hot value. | ||||
| CboardEnvTempCool | 1.3.6.1.4.1.52.4.1.1.8.2.1.1.8 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The temperature value below which the board temperature is deemed to be cool, if it is above or equal the cold value. | ||||
| CboardEnvTempCold | 1.3.6.1.4.1.52.4.1.1.8.2.1.1.9 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The temperature value below which the board temperature is deemed to be cold. | ||||
| CboardEnvTempRelHot | 1.3.6.1.4.1.52.4.1.1.8.2.1.1.10 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The temperature value above ambient at which the board temperature is deemed to be hot relative to ambient. | ||||
| CboardEnvTempRelWarm | 1.3.6.1.4.1.52.4.1.1.8.2.1.1.11 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The temperature value above ambient at which the board temperature is deemed to be warm relative to ambient, if it is below the relative hot value of boardEnvTempRelHot. | ||||
| CboardEnvTempMaxFanRelHot | 1.3.6.1.4.1.52.4.1.1.8.2.1.1.12 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The temperature value above ambient at which the board temperature is deemed to be hot relative to ambient, with all fans in the chassis running at there maximum speed. | ||||
| CboardEnvTempMaxFanRelWarm | 1.3.6.1.4.1.52.4.1.1.8.2.1.1.13 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The temperature value above ambient at which the board temperature is deemed to be warm relative to ambient, if it is below the relative hot value of boardEnvTempMaxFanRelHot, with all fans in the chassis running at there maximum speed. | ||||
| NpsEnv | 1.3.6.1.4.1.52.4.1.1.8.3 | |||
| TpsEnvSlotTable | 1.3.6.1.4.1.52.4.1.1.8.3.1 | NA | mandatory | |
table · not-accessible · mandatory A list of networking modules installed in this chassis. | ||||
| RpsEnvSlotEntry | 1.3.6.1.4.1.52.4.1.1.8.3.1.1 | NA | mandatory | |
row · not-accessible · mandatory A slot entry containing objects for a particular module.
| ||||
| CpsEnvSlotID | 1.3.6.1.4.1.52.4.1.1.8.3.1.1.1 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The slot number of a chassis slot in which this power supply is installed. An unique value, in the range between 1 and and the value of chNumSlots. This object is similiar to chSlotID in the Chassis MIB. | ||||
| CpsEnvTemp | 1.3.6.1.4.1.52.4.1.1.8.3.1.1.2 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The temperature of the power supply. If this sensor is broken or not supported, then this object will be set to zero. The temperature is in degrees Fahrenheit * 10. | ||||
| CpsEnvTempStatus | 1.3.6.1.4.1.52.4.1.1.8.3.1.1.3 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory This object reflects the status of the power supply temperature reading.
| ||||
| CpsEnvTempHot | 1.3.6.1.4.1.52.4.1.1.8.3.1.1.4 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The temperature value above which the power supply temperature is deemed to be hot. | ||||
| CpsEnvTempWarm | 1.3.6.1.4.1.52.4.1.1.8.3.1.1.5 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The temperature value above which the power supply temperature is deemed to be warm, if it is below or equal the hot value. | ||||
| CpsEnvTempCool | 1.3.6.1.4.1.52.4.1.1.8.3.1.1.6 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The temperature value below which the power supply temperature is deemed to be cool, if it is above or equal the cold value. | ||||
| CpsEnvTempCold | 1.3.6.1.4.1.52.4.1.1.8.3.1.1.7 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The temperature value below which the power supply temperature is deemed to be cold. | ||||
| CpsEnvFanStatus | 1.3.6.1.4.1.52.4.1.1.8.3.1.1.8 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory This object reflects the status of the chassis fan.
| ||||
| CpsEnvFanAdmin | 1.3.6.1.4.1.52.4.1.1.8.3.1.1.9 | INTEGER | RW | mandatory |
column · INTEGER · read-write · mandatory This object is used to select the operational mode of the fan. If the value is set to 1 (auto) then fan speed is based on temperature. If the value is set to 3 (testing) then value will return to it's previous value prior to being set at 3.
| ||||
| CpsEnvFanSpeed | 1.3.6.1.4.1.52.4.1.1.8.3.1.1.10 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The fan speed expressed as a percentage of the maximum fan speed. | ||||
| NbbuEnv | 1.3.6.1.4.1.52.4.1.1.8.4 | |||