CTRON-DLSW-MIB
Enterasys Networks Inc.snmptranslate -m CTRON-DLSW-MIB -Tpsnmpwalk -v2c -c <community> -m CTRON-DLSW-MIB <host> 1.3.6.1.4.1.52.4.1.2.8.1Imports
| BRIDGE-MIB | MacAddress |
|---|---|
| CTRON-MIB-NAMES | ctDLSW |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
| SNMPv2-SMI | Bits, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso |
| SNMPv2-TC | DisplayString, PhysAddress, TEXTUAL-CONVENTION |
OID tree
| Name | OID | Type | Access | Status |
|---|---|---|---|---|
| NctdlswNode | 1.3.6.1.4.1.52.4.1.2.8.1 | |||
| NctdlswNodeConfig | 1.3.6.1.4.1.52.4.1.2.8.1.1 | |||
| SctdlswVersion | 1.3.6.1.4.1.52.4.1.2.8.1.1.1 | DisplayString | RO | mandatory |
scalar · DisplayString · read-only · mandatory Indicates the current revision level of the DLSw firmware in textual format. | ||||
| SctdlswAdminStatus | 1.3.6.1.4.1.52.4.1.2.8.1.1.2 | INTEGER | RW | mandatory |
scalar · INTEGER · read-write · mandatory Sets the system-wide administrative state of DLSw services.
| ||||
| SctdlswOperStatus | 1.3.6.1.4.1.52.4.1.2.8.1.1.3 | INTEGER | RO | mandatory |
scalar · INTEGER · read-only · mandatory Indicates the current system-wide status of DLSw services.
| ||||
| SctdlswUpTime | 1.3.6.1.4.1.52.4.1.2.8.1.1.4 | TimeTicks | RO | mandatory |
scalar · TimeTicks · read-only · mandatory Indicates the time (in hundredths of a second) since the DLSw services portion of the system was enabled. | ||||
| SctdlswOperVirtualRingNumber | 1.3.6.1.4.1.52.4.1.2.8.1.1.5 | INTEGER (1..4095) | RW | mandatory |
scalar · INTEGER (1..4095) · read-write · mandatory Specifies the operational ring/segment number that uniquely identifies the virtual segment to which this DLSw is connected. This object may only be modified when ctdlswOperStatus is disabled. | ||||
| SctdlswNBLocalFilterType | 1.3.6.1.4.1.52.4.1.2.8.1.1.6 | INTEGER | RW | mandatory |
scalar · INTEGER · read-write · mandatory Specifies the type of filtering to be applied to NetBIOS frames received on a local LAN segment. If set to block(1), any frame matching any entry in ctdlswNBLocalFilterTable will not be forwarded. If set to pass(2), only frames matching any entry in ctdlswNBLocalFilterTable will be forwarded.
| ||||
| SctdlswNBRemoteFilterType | 1.3.6.1.4.1.52.4.1.2.8.1.1.7 | INTEGER | RW | mandatory |
scalar · INTEGER · read-write · mandatory Specifies the type of filtering to be applied to NetBIOS frames received from a remote DLSw partner. If set to block(1), any frame matching any entry in ctdlswNBRemoteFilterTable will not be forwarded. If set to pass(2), only frames matching any entry in ctdlswNBRemoteFilterTable will be forwarded.
| ||||
| SctdlswMacLocalFilterType | 1.3.6.1.4.1.52.4.1.2.8.1.1.8 | INTEGER | RW | mandatory |
scalar · INTEGER · read-write · mandatory Specifies the type of address filtering to be applied to SNA MAC frames received on a local LAN segment. If set to block(1), any frame matching any entry in ctdlswMacLocalFilterTable will not be forwarded. If set to pass(2), only frames matching any entry in ctdlswMacLocalFilterTable will be forwarded.
| ||||
| SctdlswMacRemoteFilterType | 1.3.6.1.4.1.52.4.1.2.8.1.1.9 | INTEGER | RW | mandatory |
scalar · INTEGER · read-write · mandatory Specifies the type of address filtering to be applied to SNA MAC frames received from a remote DLSw partner. If set to block(1), any frame matching any entry in ctdlswMacRemoteFilterTable will not be forwarded. If set to pass(2), only frames matching any entry in ctdlswMacRemoteFilterTable will be forwarded.
| ||||
| SctdlswAcceptDynamicTConn | 1.3.6.1.4.1.52.4.1.2.8.1.1.10 | INTEGER | RW | mandatory |
scalar · INTEGER · read-write · mandatory Specifies whether this DLSw allows unconfigured DLSw partners to establish transport connections. Yes(1) means unconfigured DLSw partners may establish transport connections with this DLSw. No(2) means only user configured DLSw partners may establish transport connections with this DLSw.
| ||||
| SctdlswDefaultPortNumber | 1.3.6.1.4.1.52.4.1.2.8.1.1.11 | INTEGER | RW | mandatory |
scalar · INTEGER · read-write · mandatory Specifies the index of the port whose associated IP address will be used to identify this DLSw node to its DLSw partners. The value must be consistent with 'ifIndex' of mib-II. | ||||
| NctdlswPort | 1.3.6.1.4.1.52.4.1.2.8.2 | |||
| TctdlswPortTable | 1.3.6.1.4.1.52.4.1.2.8.2.1 | NA | mandatory | |
table · not-accessible · mandatory This table contains an entry for each port, and specifies configuration parameters used to establish circuits over that port. This table is indexed by ctdlswPortName, which identifies the port for which an entry exists. These port configuration entries will be provided automatically based on the physical port configuration. These entries cannot be created or deleted - only modified. | ||||
| RctdlswPortEntry | 1.3.6.1.4.1.52.4.1.2.8.2.1.1 | NA | mandatory | |
row · not-accessible · mandatory Each entry specifies configuration parameters for a port for which the entry exists.
| ||||
| CctdlswPortIndex | 1.3.6.1.4.1.52.4.1.2.8.2.1.1.1 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory Specifies a unique value for each port. Values are derived from 'ifIndex' of mib-II. | ||||
| CctdlswPortName | 1.3.6.1.4.1.52.4.1.2.8.2.1.1.2 | DisplayString (SIZE (1..8)) | RO | mandatory |
column · DisplayString (SIZE (1..8)) · read-only · mandatory Specifies the user friendly name for this port. | ||||
| CctdlswPortAddress | 1.3.6.1.4.1.52.4.1.2.8.2.1.1.3 | MacAddress | RO | mandatory |
column · MacAddress · read-only · mandatory Specifies the MAC address of this port. | ||||
| CctdlswPortAdminStatus | 1.3.6.1.4.1.52.4.1.2.8.2.1.1.4 | INTEGER | RW | mandatory |
column · INTEGER · read-write · mandatory Sets the administrative state of DLSw frame forwarding for this port.
| ||||
| CctdlswPortOperStatus | 1.3.6.1.4.1.52.4.1.2.8.2.1.1.5 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory Specifies the current operating status of DLSw frame forwarding for this port.
| ||||
| CctdlswPortUpTime | 1.3.6.1.4.1.52.4.1.2.8.2.1.1.6 | TimeTicks | RO | mandatory |
column · TimeTicks · read-only · mandatory Indicates the time (in hundredths of a second) since this port was enabled. A value of zero means this port is not presently enabled. | ||||
| NctdlswFilter | 1.3.6.1.4.1.52.4.1.2.8.3 | |||
| TctdlswLocalNBFilterTable | 1.3.6.1.4.1.52.4.1.2.8.3.1 | NA | mandatory | |
table · not-accessible · mandatory A list of NETBIOS source-destination name pairs whose frames are allowed (or not allowed) to be forwarded via this DLSw. Only source-destination name pairs from locally generated NetBIOS frames are compared against entries in this table. | ||||
| RctdlswLocalNBFilterEntry | 1.3.6.1.4.1.52.4.1.2.8.3.1.1 | NA | mandatory | |
row · not-accessible · mandatory Information for one NetBIOS source-destination name pair. | ||||
| CctdlswLocalNBFilterSrcName | 1.3.6.1.4.1.52.4.1.2.8.3.1.1.1 | NBName | RO | mandatory |
column · NBName · read-only · mandatory The source NETBIOS name to filter on. | ||||
| CctdlswLocalNBFilterDestName | 1.3.6.1.4.1.52.4.1.2.8.3.1.1.2 | NBName | RO | mandatory |
column · NBName · read-only · mandatory The destination NETBIOS NAME to filter on. | ||||
| CctdlswLocalNBFilterControl | 1.3.6.1.4.1.52.4.1.2.8.3.1.1.3 | INTEGER | RW | mandatory |
column · INTEGER · read-write · mandatory Set this object to delete(3) to remove this entry. Set to create(2) to add this entry. A get of this object will return other(1).
| ||||
| TctdlswRemoteNBFilterTable | 1.3.6.1.4.1.52.4.1.2.8.3.2 | NA | mandatory | |
table · not-accessible · mandatory A list of NETBIOS source-destination name pairs whose frames are allowed (or not allowed) to be forwarded via this DLSw. Only source-destination name pairs from NetBIOS frames received from remote DLSw partners are compared against entries in this table. | ||||
| RctdlswRemoteNBFilterEntry | 1.3.6.1.4.1.52.4.1.2.8.3.2.1 | NA | mandatory | |
row · not-accessible · mandatory Information for one NetBIOS source-destination name pair. | ||||
| CctdlswRemoteNBFilterSrcName | 1.3.6.1.4.1.52.4.1.2.8.3.2.1.1 | NBName | RO | mandatory |
column · NBName · read-only · mandatory The source NETBIOS name to filter on. | ||||
| CctdlswRemoteNBFilterDestName | 1.3.6.1.4.1.52.4.1.2.8.3.2.1.2 | NBName | RO | mandatory |
column · NBName · read-only · mandatory The destination NETBIOS name to filter on. | ||||
| CctdlswRemoteNBFilterControl | 1.3.6.1.4.1.52.4.1.2.8.3.2.1.3 | INTEGER | RW | mandatory |
column · INTEGER · read-write · mandatory Set this object to delete(3) to remove this entry. Set to create(2) to add this entry. A get of this object will return other(1).
| ||||
| TctdlswLocalMacFilterTable | 1.3.6.1.4.1.52.4.1.2.8.3.3 | NA | mandatory | |
table · not-accessible · mandatory A list of source-destination MAC address pairs whose frames are allowed (or not allowed) to be forwarded via this DLSw. Only source-destination name pairs from locally generated SNA MAC frames are compared against entries in this table. | ||||
| RctdlswLocalMacFilterEntry | 1.3.6.1.4.1.52.4.1.2.8.3.3.1 | NA | mandatory | |
row · not-accessible · mandatory Information for one source-destination MAC address pair. | ||||
| CctdlswLocalMacFilterSrcAddr | 1.3.6.1.4.1.52.4.1.2.8.3.3.1.1 | MacAddress | RO | mandatory |
column · MacAddress · read-only · mandatory The source MAC Address to filter on. | ||||
| CctdlswLocalMacFilterSrcMask | 1.3.6.1.4.1.52.4.1.2.8.3.3.1.2 | MacAddress | RO | mandatory |
column · MacAddress · read-only · mandatory The source MAC Address mask to filter on. | ||||
| CctdlswLocalMacFilterDestAddr | 1.3.6.1.4.1.52.4.1.2.8.3.3.1.3 | MacAddress | RO | mandatory |
column · MacAddress · read-only · mandatory The destination MAC Address to filter on. | ||||
| CctdlswLocalMacFilterDestMask | 1.3.6.1.4.1.52.4.1.2.8.3.3.1.4 | MacAddress | RO | mandatory |
column · MacAddress · read-only · mandatory The destination MAC Address mask to filter on. | ||||
| CctdlswLocalMacFilterControl | 1.3.6.1.4.1.52.4.1.2.8.3.3.1.5 | INTEGER | RW | mandatory |
column · INTEGER · read-write · mandatory Set this object to delete(3) to remove this entry. Set to create(2) to add this entry. A get of this object will return other(1).
| ||||
| TctdlswRemoteMacFilterTable | 1.3.6.1.4.1.52.4.1.2.8.3.4 | NA | mandatory | |
table · not-accessible · mandatory A list of source-destination MAC address pairs whose frames are allowed (or not allowed) to be forwarded via this DLSw. Only source-destination name pairs from SNA MAC frames received from remote DLSw partners are compared against entries in this table. | ||||
| RctdlswRemoteMacFilterEntry | 1.3.6.1.4.1.52.4.1.2.8.3.4.1 | NA | mandatory | |
row · not-accessible · mandatory Information for one source-destination MAC address pair. | ||||
| CctdlswRemoteMacFilterSrcAddr | 1.3.6.1.4.1.52.4.1.2.8.3.4.1.1 | MacAddress | RO | mandatory |
column · MacAddress · read-only · mandatory The source MAC Address to filter on. | ||||
| CctdlswRemoteMacFilterSrcMask | 1.3.6.1.4.1.52.4.1.2.8.3.4.1.2 | MacAddress | RO | mandatory |
column · MacAddress · read-only · mandatory The source MAC Address mask to filter on. | ||||
| CctdlswRemoteMacFilterDestAddr | 1.3.6.1.4.1.52.4.1.2.8.3.4.1.3 | MacAddress | RO | mandatory |
column · MacAddress · read-only · mandatory The destination MAC Address to filter on. | ||||
| CctdlswRemoteMacFilterDestMask | 1.3.6.1.4.1.52.4.1.2.8.3.4.1.4 | MacAddress | RO | mandatory |
column · MacAddress · read-only · mandatory The destination MAC Address mask to filter on. | ||||
| CctdlswRemoteMacFilterControl | 1.3.6.1.4.1.52.4.1.2.8.3.4.1.5 | INTEGER | RW | mandatory |
column · INTEGER · read-write · mandatory Set this object to delete(3) to remove this entry. Set to create(2) to add this entry. A get of this object will return other(1).
| ||||
| NctdlswTConn | 1.3.6.1.4.1.52.4.1.2.8.4 | |||
| TctdlswTConnTable | 1.3.6.1.4.1.52.4.1.2.8.4.1 | NA | mandatory | |
table · not-accessible · mandatory A list of transport connections which are either user defined or dynamically created for this DLSw. | ||||
| RctdlswTConnEntry | 1.3.6.1.4.1.52.4.1.2.8.4.1.1 | NA | mandatory | |
row · not-accessible · mandatory | ||||
| CctdlswTConnRemoteTAddr | 1.3.6.1.4.1.52.4.1.2.8.4.1.1.1 | IpAddress | RO | mandatory |
column · IpAddress · read-only · mandatory Specifies the remote transport address for this transport connection. It can be defined by the user, or established dynamically upon receiving a connection setup request from another DLSw. | ||||
| CctdlswTConnControl | 1.3.6.1.4.1.52.4.1.2.8.4.1.1.2 | INTEGER | RW | mandatory |
column · INTEGER · read-write · mandatory Set this object to delete(3) to remove this entry. Set to create(2) to add this entry. A get of this object will return other(1).
| ||||
| CctdlswTConnUpTime | 1.3.6.1.4.1.52.4.1.2.8.4.1.1.3 | TimeTicks | RO | mandatory |
column · TimeTicks · read-only · mandatory Indicates the time (in hundredths of a second) since this transport connection was last established. A value of zero means this transport connection is not presently established. | ||||
| CctdlswTConnOperStatus | 1.3.6.1.4.1.52.4.1.2.8.4.1.1.4 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory Indicates the status of this transport connection.
| ||||
| CctdlswTConnType | 1.3.6.1.4.1.52.4.1.2.8.4.1.1.5 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory Indicates the means by which this transport connection was determined. Configured(1) means this entry was user defined. Dynamic(2) means this entry was not user defined but was created as a result of a connection initiated by another DLSw.
| ||||
| NctdlswTrap | 1.3.6.1.4.1.52.4.1.2.8.5 | |||
| NctdlswEvent | 1.3.6.1.4.1.52.4.1.2.8.6 | |||
| NctdlswEventLogConfig | 1.3.6.1.4.1.52.4.1.2.8.6.1 | |||
| SctdlswEventAdminStatus | 1.3.6.1.4.1.52.4.1.2.8.6.1.1 | INTEGER | RW | mandatory |
scalar · INTEGER · read-write · mandatory Set the administrative state of Data Link Switching event logging. enabled(3) causes the event log to become active. disabled(2) causes the event log to become inactive.
| ||||
| SctdlswEventMaxEntries | 1.3.6.1.4.1.52.4.1.2.8.6.1.2 | INTEGER | RW | mandatory |
scalar · INTEGER · read-write · mandatory Sets the maximum number of entries allowed in the event log table. When the number of entries reaches the value of ctdlswEventMaxEntries the first (oldest) entry is deleted to allow a new entry to be added. | ||||
| SctdlswEventTraceAll | 1.3.6.1.4.1.52.4.1.2.8.6.1.3 | INTEGER | RW | mandatory |
scalar · INTEGER · read-write · mandatory enabled(3) allows logging of all event types. disabled(2) causes the event log filter table to specify which events to log.
| ||||
| NctdlswEventLogFilterTable | 1.3.6.1.4.1.52.4.1.2.8.6.2 | |||
| TctdlswEventFilterTable | 1.3.6.1.4.1.52.4.1.2.8.6.2.1 | NA | mandatory | |
table · not-accessible · mandatory This table contains descriptions of how to filter log entries. | ||||
| RctdlswEventFilterEntry | 1.3.6.1.4.1.52.4.1.2.8.6.2.1.1 | NA | mandatory | |
row · not-accessible · mandatory Each entry specifies the filter for log entries. The instance ctdlswEventProtocol refers to the instance used in the nwRtgProtocolTable and nwComponentTable specified by the ctrouter-mib.txt. | ||||
| CctdlswEventFltrProtocol | 1.3.6.1.4.1.52.4.1.2.8.6.2.1.1.1 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory Selects the protocol to log events from. | ||||
| CctdlswEventFltrIfNum | 1.3.6.1.4.1.52.4.1.2.8.6.2.1.1.2 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory Specifies the port on which to log events. | ||||
| CctdlswEventFltrControl | 1.3.6.1.4.1.52.4.1.2.8.6.2.1.1.3 | INTEGER | RW | mandatory |
column · INTEGER · read-write · mandatory Setting this field to delete will allow entries to be removed from the table. This is done by adding new entries with instance fields that match the entry to be removed from the table. The new entry being added must have this control field set to delete in order for the matching entry already in the table to be deleted. Setting this field to add will add the entry to the table.
| ||||
| CctdlswEventFltrType | 1.3.6.1.4.1.52.4.1.2.8.6.2.1.1.4 | INTEGER | RW | mandatory |
column · INTEGER · read-write · mandatory This bit field mask filter will allow only events of certain types to be logged. By default all types will be logged. Clearing event types from this field will cause those types not to be logged. Adding event types to this field will enable those types to be logged.
| ||||
| CctdlswEventFltrSeverity | 1.3.6.1.4.1.52.4.1.2.8.6.2.1.1.5 | INTEGER | RW | mandatory |
column · INTEGER · read-write · mandatory This filter controls the amount of logging by ignoring events of lower priority than that specified by the filter value. Specifying highest(1) causes all events except those of highest severity to be ignored. Specifying highmed(2) causes lowest severity events to be ignored. Specifying highlow(3) causes all events to be logged. highmed(2) is the default setting.
| ||||
| CctdlswEventFltrAction | 1.3.6.1.4.1.52.4.1.2.8.6.2.1.1.6 | INTEGER | RW | mandatory |
column · INTEGER · read-write · mandatory This field specifies how the events are to be logged. Specifying log(1) stores the events in the event log table (defined below). Specifying trap(2) sends events out through the trap mechanism. Specifying logTrap(3) does both.
| ||||
| NctdlswEventLogTable | 1.3.6.1.4.1.52.4.1.2.8.6.3 | |||
| TctdlswEventTable | 1.3.6.1.4.1.52.4.1.2.8.6.3.1 | NA | mandatory | |
table · not-accessible · mandatory This table contains all events that have been logged. | ||||
| RctdlswEventEntry | 1.3.6.1.4.1.52.4.1.2.8.6.3.1.1 | NA | mandatory | |
row · not-accessible · mandatory Each entry specifies events that have been logged.
| ||||
| CctdlswEventNumber | 1.3.6.1.4.1.52.4.1.2.8.6.3.1.1.1 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The number uniquely identifies events. | ||||
| CctdlswEventTime | 1.3.6.1.4.1.52.4.1.2.8.6.3.1.1.2 | TimeTicks | RO | mandatory |
column · TimeTicks · read-only · mandatory This number specifies when the event was logged. | ||||
| CctdlswEventType | 1.3.6.1.4.1.52.4.1.2.8.6.3.1.1.3 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory Specifies type of event logged.
| ||||
| CctdlswEventSeverity | 1.3.6.1.4.1.52.4.1.2.8.6.3.1.1.4 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory Specifies the severity of the event logged.
| ||||
| CctdlswEventProtocol | 1.3.6.1.4.1.52.4.1.2.8.6.3.1.1.5 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory Specifies the protocol where the event occured. | ||||
| CctdlswEventIfNum | 1.3.6.1.4.1.52.4.1.2.8.6.3.1.1.6 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory Specifies the port the event occurred on. | ||||
| CctdlswEventTextString | 1.3.6.1.4.1.52.4.1.2.8.6.3.1.1.7 | OCTET STRING | RO | mandatory |
column · OCTET STRING · read-only · mandatory Specifies the actual text string to be logged. | ||||