CTRON-BDG-MIB
Enterasys Networks Inc.snmptranslate -m CTRON-BDG-MIB -Tpsnmpwalk -v2c -c <community> -m CTRON-BDG-MIB <host> 1.3.6.1.4.1.52.2.1Imports
| IRM-OIDS | bridge, layerMgmt |
|---|---|
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
| SNMPv2-SMI | Bits, Counter32, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso |
| SNMPv2-TC | DisplayString, PhysAddress, TEXTUAL-CONVENTION |
OID tree
| Name | OID | Type | Access | Status |
|---|---|---|---|---|
| NbridgeRev1 | 1.3.6.1.4.1.52.1.3.1 | |||
| Nbdgdevice | 1.3.6.1.4.1.52.1.3.1.1 | |||
| SbdgdeviceDisableBdg | 1.3.6.1.4.1.52.1.3.1.1.1 | INTEGER | RW | mandatory |
scalar · INTEGER · read-write · mandatory Indicates if the bridge will be disabled.
| ||||
| SbdgdeviceRestoreSettings | 1.3.6.1.4.1.52.1.3.1.1.2 | INTEGER | RW | mandatory |
scalar · INTEGER · read-write · mandatory Restore the following settings to their default values: Bridge Name to ETHERNET_BRIDGE, Location to LOCAL, Port 1 Name to PORT_1, Port 2 Name to PORT_2, Port 1 Network Name to LAN_1, Port 2 Network Name to LAN_2, Ageing Time for Acquired Database to 300 seconds, Erase the acquired database, Erase the permanent database, Place sixteen default multicast addresses into the permanent and acquired databases, Type of Spanning Tree to 802.1, Type of Filtering to IEEE 802.1, Bridge Max Age to 20 seconds, Bridge Forward Delay to 15 seconds, Bridge Hello Time to 2 seconds, Bridge Priority to 8000, Port 1 Priority to 80, Port 2 Priority to 80, Port 1 Path Cost to 100, Port 2 Path Cost to 100, Restart the bridge.
| ||||
| SbdgdeviceBdgName | 1.3.6.1.4.1.52.1.3.1.1.4 | OCTET STRING | RW | mandatory |
scalar · OCTET STRING · read-write · mandatory The user-defined name (up to 32 characters long) of the bridge. The default bridge name is ETHERNET_BRIDGE. | ||||
| SbdgdeviceNumPorts | 1.3.6.1.4.1.52.1.3.1.1.5 | INTEGER | RO | mandatory |
scalar · INTEGER · read-only · mandatory The number of ports present on the bridge. | ||||
| SbdgdeviceType | 1.3.6.1.4.1.52.1.3.1.1.6 | OCTET STRING | RO | mandatory |
scalar · OCTET STRING · read-only · mandatory The type of bridge, NB25E, IRBM, or NB20E. | ||||
| SbdgdeviceVersion | 1.3.6.1.4.1.52.1.3.1.1.7 | OCTET STRING | RO | mandatory |
scalar · OCTET STRING · read-only · mandatory The release version of the firmware installed in the bridge. | ||||
| SbdgdeviceLocation | 1.3.6.1.4.1.52.1.3.1.1.8 | OCTET STRING | RW | mandatory |
scalar · OCTET STRING · read-write · mandatory The user-defined name to indicate the location of the bridge on the network. The default location name is LOCAL. | ||||
| SbdgdeviceStatus | 1.3.6.1.4.1.52.1.3.1.1.9 | OCTET STRING | RO | mandatory |
scalar · OCTET STRING · read-only · mandatory The status of the bridge, ON-LINE, STAND BY or DISABLED. | ||||
| SbdgdeviceRestartBdg | 1.3.6.1.4.1.52.1.3.1.1.10 | INTEGER | RW | mandatory |
scalar · INTEGER · read-write · mandatory Force the bridge to undergo a software reset.
| ||||
| SbdgdeviceFrFwd | 1.3.6.1.4.1.52.1.3.1.1.11 | Counter | RO | mandatory |
scalar · Counter · read-only · mandatory The number of frames forwarded by the bridge. | ||||
| SbdgdeviceFrRx | 1.3.6.1.4.1.52.1.3.1.1.12 | Counter | RO | mandatory |
scalar · Counter · read-only · mandatory The number of frames received by the bridge. | ||||
| SbdgdeviceFrFlt | 1.3.6.1.4.1.52.1.3.1.1.13 | Counter | RO | mandatory |
scalar · Counter · read-only · mandatory The number of frames filtered by the bridge. | ||||
| SbdgdeviceErr | 1.3.6.1.4.1.52.1.3.1.1.14 | Counter | RO | mandatory |
scalar · Counter · read-only · mandatory The total number of network errors that have occurred. | ||||
| SbdgdeviceSwitchSetting | 1.3.6.1.4.1.52.1.3.1.1.15 | OCTET STRING | RO | mandatory |
scalar · OCTET STRING · read-only · mandatory Indicates the current switch settings read from the bridge hardware. | ||||
| SbdgdeviceNumRestarts | 1.3.6.1.4.1.52.1.3.1.1.16 | Counter | RO | mandatory |
scalar · Counter · read-only · mandatory The number of times the bridge has been powered up or restarted. | ||||
| SbdgdeviceTypeFiltering | 1.3.6.1.4.1.52.1.3.1.1.17 | INTEGER | RW | mandatory |
scalar · INTEGER · read-write · mandatory The type of filtering to be performed by the bridge. The default is IEEE 802.1.
| ||||
| SbdgdeviceSTAProtocol | 1.3.6.1.4.1.52.1.3.1.1.18 | INTEGER | RW | mandatory |
scalar · INTEGER · read-write · mandatory The spanning tree algorithm under which the bridge is operating.
The selections are as follows:
- IEEE 802.1 compliant spanning tree algorithm
environment (802.1)
- DEC LAN Bridge 100 environment (DEC)
- Without the spanning tree algorithm enabled (NONE)
The default is 802.1.
| ||||
| SbdgdeviceBridgeID | 1.3.6.1.4.1.52.1.3.1.1.19 | OCTET STRING | RO | mandatory |
scalar · OCTET STRING · read-only · mandatory The unique identifier of the bridge. The first two bytes of the identifier are the bridge priority and the last six bytes are the Ethernet address. | ||||
| SbdgdeviceTopChgCnt | 1.3.6.1.4.1.52.1.3.1.1.20 | Counter | RO | mandatory |
scalar · Counter · read-only · mandatory The number of times the bridge's Topology Change Flag has been changed since the bridge was powered up or initialized. | ||||
| SbdgdeviceRootCost | 1.3.6.1.4.1.52.1.3.1.1.21 | INTEGER | RO | mandatory |
scalar · INTEGER · read-only · mandatory The cost of the path to the root from this bridge. | ||||
| SbdgdeviceRootPort | 1.3.6.1.4.1.52.1.3.1.1.22 | INTEGER | RO | mandatory |
scalar · INTEGER · read-only · mandatory The port identifier for the port which offers the lowest cost path to the root, i.e. that port for which the sum of the values of the designated cost and path cost parameters held for the port is lowest. | ||||
| SbdgdeviceHelloTime | 1.3.6.1.4.1.52.1.3.1.1.23 | INTEGER | RO | mandatory |
scalar · INTEGER · read-only · mandatory The time interval between the transmission of Configuration BPDU's by a bridge which is attempting to become the root or is the root. | ||||
| SbdgdeviceBdgMaxAge | 1.3.6.1.4.1.52.1.3.1.1.24 | INTEGER | RW | mandatory |
scalar · INTEGER · read-write · mandatory The value of the Max Age parameter when the bridge is the root or is attempting to become the root. A time of 6 to 40 seconds is allowed. The default is 20 seconds. | ||||
| SbdgdeviceBdgFwdDly | 1.3.6.1.4.1.52.1.3.1.1.25 | INTEGER | RW | mandatory |
scalar · INTEGER · read-write · mandatory The value of the forward delay parameter when the bridge is the root or is attempting to become the root. A time of 4 to 30 seconds is allowed. | ||||
| SbdgdeviceTimeTopChg | 1.3.6.1.4.1.52.1.3.1.1.26 | INTEGER | RO | mandatory |
scalar · INTEGER · read-only · mandatory The time in seconds that has elapsed since the bridge's Topology Change Flag last recorded the value of a topology change. | ||||
| SbdgdeviceTopChg | 1.3.6.1.4.1.52.1.3.1.1.27 | INTEGER | RO | mandatory |
scalar · INTEGER · read-only · mandatory Indicates if a bridge topology change is in progress.
| ||||
| SbdgdeviceDesigRoot | 1.3.6.1.4.1.52.1.3.1.1.28 | OCTET STRING | RO | mandatory |
scalar · OCTET STRING · read-only · mandatory The unique identifier of the bridge recorded as the root. | ||||
| SbdgdeviceMaxAge | 1.3.6.1.4.1.52.1.3.1.1.29 | INTEGER | RO | mandatory |
scalar · INTEGER · read-only · mandatory The maximum age of received protocol information before it is discarded. | ||||
| SbdgdeviceHoldTime | 1.3.6.1.4.1.52.1.3.1.1.30 | INTEGER | RO | mandatory |
scalar · INTEGER · read-only · mandatory The minimum time period elapsing between the transmission of configuration BPDU's through a given bridge port. | ||||
| SbdgdeviceFwdDly | 1.3.6.1.4.1.52.1.3.1.1.31 | INTEGER | RO | mandatory |
scalar · INTEGER · read-only · mandatory The time spent in the listening state while moving from the blocking state to the learning state, or the time spent in the learning state while moving from the listening state to the forwarding state. | ||||
| SbdgdeviceBdgHello | 1.3.6.1.4.1.52.1.3.1.1.32 | INTEGER | RW | mandatory |
scalar · INTEGER · read-write · mandatory The value of the Hello Time parameter when the bridge is the root or is attempting to become the root. A time of 1 to 10 seconds is allowed. The default is 2 seconds. | ||||
| SbdgdeviceBdgPriority | 1.3.6.1.4.1.52.1.3.1.1.33 | INTEGER | RW | mandatory |
scalar · INTEGER · read-write · mandatory The part of the bridge address that contains the identifier used in the spanning tree for priority comparisons. Allowed range is 0 through FFFF. The default is 8000. | ||||
| SbdgdeviceResetCounts | 1.3.6.1.4.1.52.1.3.1.1.34 | INTEGER | RW | mandatory |
scalar · INTEGER · read-write · mandatory Reset all counters to zero.
| ||||
| SbdgdeviceUptime | 1.3.6.1.4.1.52.1.3.1.1.35 | INTEGER | RO | mandatory |
scalar · INTEGER · read-only · mandatory The time, in seconds, that has elapsed since the bridge was last reset or initialized. | ||||
| SbdgdeviceTrapType | 1.3.6.1.4.1.52.1.3.1.1.36 | OBJECT IDENTIFIER | RO | mandatory |
scalar · OBJECT IDENTIFIER · read-only · mandatory Contains the object identifier of the first VarBinding in the last trap generated by the bridge. | ||||
| NbdgPort | 1.3.6.1.4.1.52.1.3.1.2 | |||
| SbdgPortAddress | 1.3.6.1.4.1.52.1.3.1.2.1 | OCTET STRING | RO | mandatory |
scalar · OCTET STRING · read-only · mandatory The Ethernet address of the port. | ||||
| SbdgPortName | 1.3.6.1.4.1.52.1.3.1.2.2 | OCTET STRING | RW | mandatory |
scalar · OCTET STRING · read-write · mandatory The user-defined name assigned to the port. The default port 1 name is PORT_1 and the default Port 2 name is PORT_2. | ||||
| SbdgPortType | 1.3.6.1.4.1.52.1.3.1.2.3 | OCTET STRING | RO | mandatory |
scalar · OCTET STRING · read-only · mandatory The IEEE specification the port meets, e.g. 802.3. | ||||
| SbdgPortStatus | 1.3.6.1.4.1.52.1.3.1.2.4 | OCTET STRING | RO | mandatory |
scalar · OCTET STRING · read-only · mandatory The status in which the port is operating. The status messages
for Ports 1 and 2 are:
OFF - The port is off, due to a failed network interface
chip associated with that port.
OK/SQE ON - The port is communicating with the network
and the transceiver making the connection to the network
has SQE enabled.
OK/SQE OFF - The port is communicating with the network
and the transceiver making the connection to the network
has SQE disabled.
CARRIER LOST - Communication with the network has not
been established or has been lost. | ||||
| SbdgPortNetName | 1.3.6.1.4.1.52.1.3.1.2.5 | OCTET STRING | RW | mandatory |
scalar · OCTET STRING · read-write · mandatory The user-defined name assigned to a network segment connected to the port. The default network name for Port 1 is LAN_1 and the default network name for Port 2 is LAN_2. | ||||
| SbdgPortFrRx | 1.3.6.1.4.1.52.1.3.1.2.6 | Counter | RO | mandatory |
scalar · Counter · read-only · mandatory The number of frames received at the specified port. | ||||
| SbdgPortDisInb | 1.3.6.1.4.1.52.1.3.1.2.7 | Counter | RO | mandatory |
scalar · Counter · read-only · mandatory The total number of valid frames that were received at the port but then discarded by the bridge in the forwarding process. | ||||
| SbdgPortFwdOutb | 1.3.6.1.4.1.52.1.3.1.2.8 | Counter | RO | mandatory |
scalar · Counter · read-only · mandatory The number of frames forwarded successfully to the appropriate port. | ||||
| SbdgPortDisLOB | 1.3.6.1.4.1.52.1.3.1.2.9 | Counter | RO | mandatory |
scalar · Counter · read-only · mandatory The number of packets that were discarded by the bridge because of a lack of buffer space to maintain the data. | ||||
| SbdgPortDisTDE | 1.3.6.1.4.1.52.1.3.1.2.10 | Counter | RO | mandatory |
scalar · Counter · read-only · mandatory The number of frames that were intended for forwarding but were discarded when the maximum time period set for transmission was exceeded before forwarding was possible. | ||||
| SbdgPortDisErr | 1.3.6.1.4.1.52.1.3.1.2.11 | Counter | RO | mandatory |
scalar · Counter · read-only · mandatory The number of frames that could not be transmitted because the frame was too large for the attached network (1526 bytes, including preamble, for 802.3 networks). | ||||
| SbdgPortColl | 1.3.6.1.4.1.52.1.3.1.2.12 | Counter | RO | mandatory |
scalar · Counter · read-only · mandatory The number of collisions that have occurred on the network at the specified port. | ||||
| SbdgPortTxAbrt | 1.3.6.1.4.1.52.1.3.1.2.13 | Counter | RO | mandatory |
scalar · Counter · read-only · mandatory The number of transmissions that have been aborted due to excessive collisions (over 16 attempts to transmit the same packet). | ||||
| SbdgPortOowColl | 1.3.6.1.4.1.52.1.3.1.2.14 | Counter | RO | mandatory |
scalar · Counter · read-only · mandatory The number of collisions out of the standard collision window (51.2 uS). This indicates a network problem. | ||||
| SbdgPortCRCErr | 1.3.6.1.4.1.52.1.3.1.2.15 | Counter | RO | mandatory |
scalar · Counter · read-only · mandatory The number of packets detected with Cyclical Redundancy Check failures. | ||||
| SbdgPortFrAlErr | 1.3.6.1.4.1.52.1.3.1.2.16 | Counter | RO | mandatory |
scalar · Counter · read-only · mandatory The number of errors due to misaligned packets. | ||||
| SbdgPortPriority | 1.3.6.1.4.1.52.1.3.1.2.17 | INTEGER | RW | mandatory |
scalar · INTEGER · read-write · mandatory The part of the port identifier which is used with the spanning tree algorithm when determining which port in a LAN segment has priority. The default is 80. | ||||
| SbdgPortState | 1.3.6.1.4.1.52.1.3.1.2.18 | OCTET STRING | RO | mandatory |
scalar · OCTET STRING · read-only · mandatory The current state of the port, DISABLED, LISTENING, LEARNING, FORWARDING or BLOCKING. | ||||
| SbdgPortPathCost | 1.3.6.1.4.1.52.1.3.1.2.19 | INTEGER | RW | mandatory |
scalar · INTEGER · read-write · mandatory The contributory cost of the applicable port to the overall cost of the path when the specified port is the root port. Allowable range is 1 to 65535. The default is 100. | ||||
| SbdgPortDesigCost | 1.3.6.1.4.1.52.1.3.1.2.20 | INTEGER | RO | mandatory |
scalar · INTEGER · read-only · mandatory The cost of the path of this port to the root bridge on the network. | ||||
| SbdgPortDesigBrdg | 1.3.6.1.4.1.52.1.3.1.2.21 | OCTET STRING | RO | mandatory |
scalar · OCTET STRING · read-only · mandatory The network address of the bridge that is assumed to be the root bridge on the network. | ||||
| SbdgPortDesigPort | 1.3.6.1.4.1.52.1.3.1.2.22 | INTEGER | RO | mandatory |
scalar · INTEGER · read-only · mandatory The port identifier of the bridge port believed to be the designated port for the LAN associated with the port. | ||||
| SbdgPortTopChgAck | 1.3.6.1.4.1.52.1.3.1.2.23 | INTEGER | RO | mandatory |
scalar · INTEGER · read-only · mandatory The value of the topology change acknowledgement flag in the next configuration BPDU to be transmitted on the associated port.
| ||||
| SbdgPortDesigRoot | 1.3.6.1.4.1.52.1.3.1.2.24 | OCTET STRING | RO | mandatory |
scalar · OCTET STRING · read-only · mandatory The unique bridge identifier of the bridge that is assumed to be the root bridge on the network. | ||||
| SbdgPortRuntPackets | 1.3.6.1.4.1.52.1.3.1.2.25 | Counter | RO | mandatory |
scalar · Counter · read-only · mandatory The number of packets received at the indicated bdgPort that were less than the IEEE 802.3 minimum Ethernet frame size of 64 bytes. | ||||
| SbdgPortOversizePackets | 1.3.6.1.4.1.52.1.3.1.2.26 | Counter | RO | mandatory |
scalar · Counter · read-only · mandatory The number of packets received at the indicated port that were greater than the IEEE 802.3 maximum Ethernet frame size of 1518 bytes. | ||||
| SbdgPortFrFilt | 1.3.6.1.4.1.52.1.3.1.2.27 | Counter | RO | mandatory |
scalar · Counter · read-only · mandatory The number of frames received at the indicated port that were filtered by the bridge. | ||||
| NfilterDB | 1.3.6.1.4.1.52.1.3.1.3 | |||
| NacqDB | 1.3.6.1.4.1.52.1.3.1.3.1 | |||
| NacqStats | 1.3.6.1.4.1.52.1.3.1.3.1.1 | |||
| SacqTotalEntries | 1.3.6.1.4.1.52.1.3.1.3.1.1.1 | INTEGER | RO | mandatory |
scalar · INTEGER · read-only · mandatory The total number of entries in the acquired database. | ||||
| SacqMaxEntries | 1.3.6.1.4.1.52.1.3.1.3.1.1.2 | INTEGER | RO | mandatory |
scalar · INTEGER · read-only · mandatory The maximum number of entries allowed in the acquired database. | ||||
| SacqStaticEntries | 1.3.6.1.4.1.52.1.3.1.3.1.1.3 | INTEGER | RO | mandatory |
scalar · INTEGER · read-only · mandatory The number of addresses added to the Acquired database by the user or network manager. | ||||
| SacqStaticAgeTime | 1.3.6.1.4.1.52.1.3.1.3.1.1.4 | INTEGER | RO | mandatory |
scalar · INTEGER · read-only · mandatory The length of time allowed for a static entry in the Acquired database to be inactive before it is dropped from the database. This time is fixed at zero. | ||||
| SacqDynEntries | 1.3.6.1.4.1.52.1.3.1.3.1.1.5 | INTEGER | RO | mandatory |
scalar · INTEGER · read-only · mandatory The number of entries that have been accumulated in the Acquired database through the bridge's learning process. | ||||
| SacqDynAgeTime | 1.3.6.1.4.1.52.1.3.1.3.1.1.6 | INTEGER | RW | mandatory |
scalar · INTEGER · read-write · mandatory The length of time allowed for a dynamic entry in the acquired database to be inactive before it is dropped from the database. A time from 10 - 1,000,000 seconds is allowed. The default is 300 seconds. | ||||
| SacqEraseDatabase | 1.3.6.1.4.1.52.1.3.1.3.1.1.7 | INTEGER | RW | mandatory |
scalar · INTEGER · read-write · mandatory Set to zero to erase all entries in the acquired database.
| ||||
| NacqOptions | 1.3.6.1.4.1.52.1.3.1.3.1.2 | |||
| SacqCreate00 | 1.3.6.1.4.1.52.1.3.1.3.1.2.1 | INTEGER | RW | mandatory |
scalar · INTEGER · read-write · mandatory Add an entry to the acquired database to filter packets entering ports 1 and 2 if those packets are destined for the specified address.
| ||||
| SacqCreate20 | 1.3.6.1.4.1.52.1.3.1.3.1.2.2 | INTEGER | RW | mandatory |
scalar · INTEGER · read-write · mandatory Add an entry to the acquired database to forward packets entering port1 to port2 and filter packets entering port2 if those packets are destined for the specified address.
| ||||
| SacqCreate01 | 1.3.6.1.4.1.52.1.3.1.3.1.2.3 | INTEGER | RW | mandatory |
scalar · INTEGER · read-write · mandatory Add an entry to the acquired database to filter packets entering port 1 and forward packets entering port 2 to port 1 if those packets are destined for the specified address.
| ||||
| SacqCreate21 | 1.3.6.1.4.1.52.1.3.1.3.1.2.4 | INTEGER | RW | mandatory |
scalar · INTEGER · read-write · mandatory Add an entry to the acquired database to forward packets entering port 1 to port 2 and to forward packets entering port 2 to port 1 if those packets are destined for the specified address.
| ||||
| SacqDelete | 1.3.6.1.4.1.52.1.3.1.3.1.2.5 | INTEGER | RW | mandatory |
scalar · INTEGER · read-write · mandatory Delete an entry from the acquired database.
| ||||
| SacqDispType | 1.3.6.1.4.1.52.1.3.1.3.1.2.6 | OCTET STRING | RO | mandatory |
scalar · OCTET STRING · read-only · mandatory Display the entry type, STATIC or DYNAMIC. | ||||
| SacqDispOutp1 | 1.3.6.1.4.1.52.1.3.1.3.1.2.7 | INTEGER | RO | mandatory |
scalar · INTEGER · read-only · mandatory The outbound port for packets entering port 1.
| ||||
| SacqDispOutp2 | 1.3.6.1.4.1.52.1.3.1.3.1.2.8 | INTEGER | RO | mandatory |
scalar · INTEGER · read-only · mandatory The outbound port for packets entering port 2.
| ||||
| SacqSrcAddress | 1.3.6.1.4.1.52.1.3.1.3.1.2.9 | OCTET STRING | RO | mandatory |
scalar · OCTET STRING · read-only · mandatory The source address of this acquired database entry, i.e. the instance. | ||||
| NpermDB | 1.3.6.1.4.1.52.1.3.1.3.2 | |||
| NpermStats | 1.3.6.1.4.1.52.1.3.1.3.2.1 | |||
| SpermMaxEntries | 1.3.6.1.4.1.52.1.3.1.3.2.1.1 | INTEGER | RO | mandatory |
scalar · INTEGER · read-only · mandatory The maximum number of entries allowed in the permanent database. | ||||
| SpermCurrEntries | 1.3.6.1.4.1.52.1.3.1.3.2.1.2 | INTEGER | RO | mandatory |
scalar · INTEGER · read-only · mandatory The number of entries currently recorded in the bridge's permanent database. | ||||
| SpermEraseDatabase | 1.3.6.1.4.1.52.1.3.1.3.2.1.3 | INTEGER | RW | mandatory |
scalar · INTEGER · read-write · mandatory Erase all entries in the permanent database.
| ||||
| NpermOptions | 1.3.6.1.4.1.52.1.3.1.3.2.2 | |||
| SpermCreate00 | 1.3.6.1.4.1.52.1.3.1.3.2.2.1 | INTEGER | RW | mandatory |
scalar · INTEGER · read-write · mandatory Add an entry to the permanent database to filter packets entering ports 1 and 2 if those packets are destined for the specified address.
| ||||
| SpermCreate20 | 1.3.6.1.4.1.52.1.3.1.3.2.2.2 | INTEGER | RW | mandatory |
scalar · INTEGER · read-write · mandatory Add an entry to the permanent database to forward packets entering port 1 and filter packets entering port 2 if those packets are destined for the specified address.
| ||||
| SpermCreate01 | 1.3.6.1.4.1.52.1.3.1.3.2.2.3 | INTEGER | RW | mandatory |
scalar · INTEGER · read-write · mandatory Add an entry to the permanent database to filter packets entering port 1 and forward packets entering port 2 if those packets are destined for the specified address.
| ||||
| SpermCreate21 | 1.3.6.1.4.1.52.1.3.1.3.2.2.4 | INTEGER | RW | mandatory |
scalar · INTEGER · read-write · mandatory Add an entry to the permanent database to forward packets entering ports 1 and 2 if those packets are destined for the specified address.
| ||||
| SpermDelete | 1.3.6.1.4.1.52.1.3.1.3.2.2.5 | INTEGER | RW | mandatory |
scalar · INTEGER · read-write · mandatory Delete an entry from the permanent database.
| ||||
| SpermDispType | 1.3.6.1.4.1.52.1.3.1.3.2.2.6 | OCTET STRING | RO | mandatory |
scalar · OCTET STRING · read-only · mandatory Display the entry type, STATIC or DYNAMIC. | ||||
| SpermDispOutp1 | 1.3.6.1.4.1.52.1.3.1.3.2.2.7 | INTEGER | RO | mandatory |
scalar · INTEGER · read-only · mandatory The outbound port for packets entering port 1.
| ||||
| SpermDispOutp2 | 1.3.6.1.4.1.52.1.3.1.3.2.2.8 | INTEGER | RO | mandatory |
scalar · INTEGER · read-only · mandatory The outbound port for packets entering port 2.
| ||||
| SpermSrcAddress | 1.3.6.1.4.1.52.1.3.1.3.2.2.9 | OCTET STRING | RO | mandatory |
scalar · OCTET STRING · read-only · mandatory The source address in this permanent database entry, i.e. the instance. | ||||
| NspecialDB | 1.3.6.1.4.1.52.1.3.1.3.3 | |||
| NspecStats | 1.3.6.1.4.1.52.1.3.1.3.3.1 | |||
| SspecNumEntries | 1.3.6.1.4.1.52.1.3.1.3.3.1.1 | INTEGER | RO | mandatory |
scalar · INTEGER · read-only · mandatory The number of filters in the special database. | ||||
| SspecMaxEntries | 1.3.6.1.4.1.52.1.3.1.3.3.1.2 | INTEGER | RO | mandatory |
scalar · INTEGER · read-only · mandatory The maximum number of filters the special database can contain. | ||||
| SspecNextFilterNum | 1.3.6.1.4.1.52.1.3.1.3.3.1.3 | INTEGER | RO | mandatory |
scalar · INTEGER · read-only · mandatory The number of the next available filter that can be added to the special database. | ||||
| NspecFilters | 1.3.6.1.4.1.52.1.3.1.3.3.2 | |||
| SspecEnable | 1.3.6.1.4.1.52.1.3.1.3.3.2.1 | INTEGER | RW | mandatory |
scalar · INTEGER · read-write · mandatory Enable or disable the filter.
| ||||
| SspecPort1 | 1.3.6.1.4.1.52.1.3.1.3.3.2.2 | INTEGER | RW | mandatory |
scalar · INTEGER · read-write · mandatory Set port 1 to filter or forward packets.
| ||||
| SspecPort2 | 1.3.6.1.4.1.52.1.3.1.3.3.2.3 | INTEGER | RW | mandatory |
scalar · INTEGER · read-write · mandatory Set port 2 to filter or forward packets.
| ||||
| SspecDestAddress | 1.3.6.1.4.1.52.1.3.1.3.3.2.4 | OCTET STRING | RW | mandatory |
scalar · OCTET STRING · read-write · mandatory Set the special database to filter packets with a specific destination address. | ||||
| SspecSrcAddress | 1.3.6.1.4.1.52.1.3.1.3.3.2.5 | OCTET STRING | RW | mandatory |
scalar · OCTET STRING · read-write · mandatory Set the special database to filter packets with a specific source address. | ||||
| SspecType | 1.3.6.1.4.1.52.1.3.1.3.3.2.6 | OCTET STRING | RW | mandatory |
scalar · OCTET STRING · read-write · mandatory Set the special database to filter packets with a specific type field. | ||||
| SspecDataField | 1.3.6.1.4.1.52.1.3.1.3.3.2.7 | OCTET STRING | RW | mandatory |
scalar · OCTET STRING · read-write · mandatory Set the special database to filter packets based on the first sixteen bytes of data in the packet. | ||||
| SspecDeleteFilter | 1.3.6.1.4.1.52.1.3.1.3.3.2.8 | INTEGER | RW | mandatory |
scalar · INTEGER · read-write · mandatory Delete a filter from the special database.
| ||||
| NtrapTypes | 1.3.6.1.4.1.52.1.3.1.4 | |||
| NbdgTables | 1.3.6.1.4.1.52.1.3.1.5 | |||
| Nlmcommon | 1.3.6.1.4.1.52.2.1 | |||
| NmAC | 1.3.6.1.4.1.52.2.2 | |||
| Nieee8023 | 1.3.6.1.4.1.52.2.2.1 | |||
| NpcIF | 1.3.6.1.4.1.52.2.2.1.1 | |||
| NpcIfRev | 1.3.6.1.4.1.52.2.2.1.1.1 | |||
| SpcDeviceName | 1.3.6.1.4.1.52.2.2.1.1.1.1 | OCTET STRING | RO | mandatory |
scalar · OCTET STRING · read-only · mandatory Name of the PC device | ||||
| SpcBoardType | 1.3.6.1.4.1.52.2.2.1.1.1.2 | OBJECT IDENTIFIER | RO | mandatory |
scalar · OBJECT IDENTIFIER · read-only · mandatory An object Identifier that indicates the type of the PC board. This will include MAC type and Media type. | ||||
| SpcOwnerName | 1.3.6.1.4.1.52.2.2.1.1.1.3 | OCTET STRING | RO | mandatory |
scalar · OCTET STRING · read-only · mandatory The owner of this PC. | ||||
| SpcLocation | 1.3.6.1.4.1.52.2.2.1.1.1.4 | OCTET STRING | RO | mandatory |
scalar · OCTET STRING · read-only · mandatory A text description of the location of this PC. | ||||
| SpcMMACAddr | 1.3.6.1.4.1.52.2.2.1.1.1.5 | OCTET STRING | RO | mandatory |
scalar · OCTET STRING · read-only · mandatory The MAC address of the MMAC that this PC is connected to. | ||||
| SpcMMACBoard | 1.3.6.1.4.1.52.2.2.1.1.1.6 | OCTET STRING | RO | mandatory |
scalar · OCTET STRING · read-only · mandatory The slot number of the board in the MMAC that this PC is connected to. | ||||
| SpcMMACPort | 1.3.6.1.4.1.52.2.2.1.1.1.7 | OCTET STRING | RO | mandatory |
scalar · OCTET STRING · read-only · mandatory The number of the port on the board of the MMAC that this PC is connected to. | ||||
| SpcApplication | 1.3.6.1.4.1.52.2.2.1.1.1.8 | OCTET STRING | RO | mandatory |
scalar · OCTET STRING · read-only · mandatory A text description of the network application running on this PC. | ||||
| SpcDriverRev | 1.3.6.1.4.1.52.2.2.1.1.1.9 | OCTET STRING | RO | mandatory |
scalar · OCTET STRING · read-only · mandatory The revision of the LAN card driver. | ||||
| SpcOnboardMemory | 1.3.6.1.4.1.52.2.2.1.1.1.10 | INTEGER | RO | mandatory |
scalar · INTEGER · read-only · mandatory The number of Kilobytes of memory (eg. a 16K board would reply 16) | ||||
| SpcComment | 1.3.6.1.4.1.52.2.2.1.1.1.11 | OCTET STRING | RO | mandatory |
scalar · OCTET STRING · read-only · mandatory A user-defined character string. | ||||
| SpcMACAddr | 1.3.6.1.4.1.52.2.2.1.1.1.12 | OCTET STRING | RO | mandatory |
scalar · OCTET STRING · read-only · mandatory The MAC address of the PC card. | ||||
| SpcFramesXmit | 1.3.6.1.4.1.52.2.2.1.1.1.13 | INTEGER | RO | mandatory |
scalar · INTEGER · read-only · mandatory The number of MAC frames transmitted by this PC card. | ||||
| SpcBytesXmit | 1.3.6.1.4.1.52.2.2.1.1.1.14 | INTEGER | RO | mandatory |
scalar · INTEGER · read-only · mandatory The number bytes transmitted by this PC card. | ||||
| SpcMcastXmit | 1.3.6.1.4.1.52.2.2.1.1.1.15 | INTEGER | RO | mandatory |
scalar · INTEGER · read-only · mandatory The number of multicasted frames sent by this PC card. | ||||
| SpcBcastXmit | 1.3.6.1.4.1.52.2.2.1.1.1.16 | INTEGER | RO | mandatory |
scalar · INTEGER · read-only · mandatory The number of broadcast frames from this PC card. | ||||
| SpcDeferXmit | 1.3.6.1.4.1.52.2.2.1.1.1.17 | INTEGER | RO | mandatory |
scalar · INTEGER · read-only · mandatory The number of transmit packets that were deferred due to busy media. | ||||
| SpcSglColl | 1.3.6.1.4.1.52.2.2.1.1.1.18 | INTEGER | RO | mandatory |
scalar · INTEGER · read-only · mandatory The number of transmit packet experiencing a single collision. | ||||
| SpcMultiColl | 1.3.6.1.4.1.52.2.2.1.1.1.19 | INTEGER | RO | mandatory |
scalar · INTEGER · read-only · mandatory The number of transmit packets that have experienced multiple collisions. | ||||
| SpcTotXmitErrs | 1.3.6.1.4.1.52.2.2.1.1.1.20 | INTEGER | RO | mandatory |
scalar · INTEGER · read-only · mandatory The total number of transmit errors. | ||||
| SpcLateColls | 1.3.6.1.4.1.52.2.2.1.1.1.21 | INTEGER | RO | mandatory |
scalar · INTEGER · read-only · mandatory The number of transmit packets that experienced late collisions. | ||||
| SpcXcessColls | 1.3.6.1.4.1.52.2.2.1.1.1.22 | INTEGER | RO | mandatory |
scalar · INTEGER · read-only · mandatory The number of transmit packets aborted due to excess collisions. | ||||
| SpcCarrErr | 1.3.6.1.4.1.52.2.2.1.1.1.23 | INTEGER | RO | mandatory |
scalar · INTEGER · read-only · mandatory The number of transmit packets that experience carrier sense errors (ie. lose carrier during transmission). | ||||
| SpcFramesRec | 1.3.6.1.4.1.52.2.2.1.1.1.24 | INTEGER | RO | mandatory |
scalar · INTEGER · read-only · mandatory The number of frames received. | ||||
| SpcBytesRec | 1.3.6.1.4.1.52.2.2.1.1.1.25 | INTEGER | RO | mandatory |
scalar · INTEGER · read-only · mandatory The number of bytes received by this station. | ||||
| SpcMcastRec | 1.3.6.1.4.1.52.2.2.1.1.1.26 | INTEGER | RO | mandatory |
scalar · INTEGER · read-only · mandatory The number of multicasted frames received. | ||||
| SpcBcastRec | 1.3.6.1.4.1.52.2.2.1.1.1.27 | INTEGER | RO | mandatory |
scalar · INTEGER · read-only · mandatory The number of broadcast packets received. | ||||
| SpcTotRecErrs | 1.3.6.1.4.1.52.2.2.1.1.1.28 | INTEGER | RO | mandatory |
scalar · INTEGER · read-only · mandatory The total number of receive errors. | ||||
| SpcTooLong | 1.3.6.1.4.1.52.2.2.1.1.1.29 | INTEGER | RO | mandatory |
scalar · INTEGER · read-only · mandatory The number of packets received that are too long (over 1518 bytes). | ||||
| SpcTooShort | 1.3.6.1.4.1.52.2.2.1.1.1.30 | INTEGER | RO | mandatory |
scalar · INTEGER · read-only · mandatory The number of packets that are too short. (under 64 bytes long). | ||||
| SpcAlignErrs | 1.3.6.1.4.1.52.2.2.1.1.1.31 | INTEGER | RO | mandatory |
scalar · INTEGER · read-only · mandatory The number of alignment errors in receive packets. | ||||
| SpcCRCErrs | 1.3.6.1.4.1.52.2.2.1.1.1.32 | INTEGER | RO | mandatory |
scalar · INTEGER · read-only · mandatory The number of receive packets with CRC errors. | ||||
| SpcLenErrs | 1.3.6.1.4.1.52.2.2.1.1.1.33 | INTEGER | RO | mandatory |
scalar · INTEGER · read-only · mandatory The number of packets whose length is not equal to the number of bytes received. | ||||
| SpcIntRecErr | 1.3.6.1.4.1.52.2.2.1.1.1.34 | INTEGER | RO | mandatory |
scalar · INTEGER · read-only · mandatory The number of receive packets that experienced internal errors (eg. no receive buffers). | ||||
| SpcSqeErr | 1.3.6.1.4.1.52.2.2.1.1.1.35 | INTEGER | RO | mandatory |
scalar · INTEGER · read-only · mandatory The number of SQE errors. | ||||