CTRON-AP3000-MIB
Enterasys Networks Inc.This mib module defines a portion of the SNMP enterprise MIBs under Enterasys Networks enterprise OID as an extension to the Enterasys AP3000 MIB. This Enterasys Networks Proprietary MIB was designed to be used for read-write access to configuration objects in AP3000.
snmptranslate -m CTRON-AP3000-MIB -Tpsnmpwalk -v2c -c <community> -m CTRON-AP3000-MIB <host> 1.3.6.1.4.1.52.4.13Imports
| IF-MIB | ifIndex |
|---|---|
| RFC1155-SMI | Counter32 |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
| SNMPv2-SMI | Bits, Counter32, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, enterprises, iso, mgmt |
| SNMPv2-TC | DisplayString, PhysAddress, TEXTUAL-CONVENTION |
OID tree
| Name | OID | Type | Access | Status |
|---|---|---|---|---|
| Ncabletron | 1.3.6.1.4.1.52 | |||
| Nmibs | 1.3.6.1.4.1.52.4 | |||
| IctronAP3000 | 1.3.6.1.4.1.52.4.13 | |||
identity This mib module defines a portion of the SNMP enterprise MIBs under Enterasys Networks enterprise OID as an extension to the Enterasys AP3000 MIB. This Enterasys Networks Proprietary MIB was designed to be used for read-write access to configuration objects in AP3000. | ||||
| NcomPortMgnt | 1.3.6.1.4.1.52.4.13.1 | |||
| ScomPortControl | 1.3.6.1.4.1.52.4.13.1.1 | INTEGER | RW | |
scalar · INTEGER · read-write · current The administrative enable/disable state for COM Port Control in a System.
| ||||
| NmacFilterMgnt | 1.3.6.1.4.1.52.4.13.2 | |||
| TmacFilterTable | 1.3.6.1.4.1.52.4.13.2.1 | NA | deprecated | |
table · not-accessible · deprecated Table of status information about each configured MAC Filtering Entry. | ||||
| RmacFilterEntry | 1.3.6.1.4.1.52.4.13.2.1.1 | NA | deprecated | |
row · not-accessible · deprecated An entry in the table, containing information about configuration of MAC Filter.
| ||||
| CmacFilterIndex | 1.3.6.1.4.1.52.4.13.2.1.1.1 | Integer32 (1..2147483647) | NA | deprecated |
column · Integer32 (1..2147483647) · not-accessible · deprecated Filter index. | ||||
| CmacFilterAddress | 1.3.6.1.4.1.52.4.13.2.1.1.2 | MacAddress | RW | deprecated |
column · MacAddress · read-write · deprecated This values indicates the MAC address of the MAC Filter entry. | ||||
| CmacFilterAllowedToGo | 1.3.6.1.4.1.52.4.13.2.1.1.3 | INTEGER | RW | deprecated |
column · INTEGER · read-write · deprecated The administrative allow/deny state for that specified MAC Filter Entry.
| ||||
| CmacFilterOpeStatus | 1.3.6.1.4.1.52.4.13.2.1.1.4 | INTEGER | RC | deprecated |
column · INTEGER · read-create · deprecated This object indicates the status of this entry.
other(0) - this entry is currently in use but
the conditions under which it will remain
so differ from the following values.
valid(1) - this value to indicate this entry is currently
in used.
invalid(2) - write this value to the corresponding entry,
the whole entry will be removed. Since the order of entry
shall be re-order while it has been deleted. To re-freshed
the whole table is recommended for new index.
create(3) - write this value to indicate that the new MAC address
will be added after next writing MAC address to that new entry.
The adding action will be taken on the index that grater than 1.
| ||||
| SapMacFilterControl | 1.3.6.1.4.1.52.4.13.2.2 | INTEGER | RW | deprecated |
scalar · INTEGER · read-write · deprecated This value indicates the control of the MAC filter setting.
| ||||
| TapvMacFilterOperateTable | 1.3.6.1.4.1.52.4.13.2.3 | NA | ||
table · not-accessible · current The Table used to manage the function in MAC Filter Table. | ||||
| RapvMacFilterOperateEntry | 1.3.6.1.4.1.52.4.13.2.3.1 | NA | ||
row · not-accessible · current An entry in the table, containing information about configuration in one VAP of the AP.
| ||||
| CapvMacFilterPermission | 1.3.6.1.4.1.52.4.13.2.3.1.1 | INTEGER | RW | |
column · INTEGER · read-write · current This values indicates the Permission on all the active filter entry for each Vap. The negative permission will be applied on any inactive entry or any MAC that is not in the table.
| ||||
| CapvMacFilterAddressToAdd | 1.3.6.1.4.1.52.4.13.2.3.1.2 | OCTET STRING | RW | |
column · OCTET STRING · read-write · current This values indicates the MAC address to be added to the local MAC filter table as an active entry for each Vap. | ||||
| TapvMacFilterTable | 1.3.6.1.4.1.52.4.13.2.4 | NA | ||
table · not-accessible · current Table of status information about each configured MAC Address Filtering Entry. | ||||
| RapvMacFilterEntry | 1.3.6.1.4.1.52.4.13.2.4.1 | NA | ||
row · not-accessible · current An entry in the table, containing information about configuration in one radio of the AP. MacFilterEntry is created and managed using localMACFilterMgnt Table.
| ||||
| CapvMacFilterIndex | 1.3.6.1.4.1.52.4.13.2.4.1.1 | Integer32 (1..2147483647) | NA | |
column · Integer32 (1..2147483647) · not-accessible · current MAC Filter index in each VAP. | ||||
| CapvMacFilterAddress | 1.3.6.1.4.1.52.4.13.2.4.1.2 | MacAddress | RO | |
column · MacAddress · read-only · current This values indicates the MAC address of the filter entry. | ||||
| CapvMacFilterActivity | 1.3.6.1.4.1.52.4.13.2.4.1.3 | INTEGER | RW | |
column · INTEGER · read-write · current This value indicates the Activity of the MAC table entry by the filter permission. If allow(1), the filter permission will be applied to the MAC address. If denied(2), the filter permission will not be applied to the MAC address. If delete_entry(3), the filter entry will be deleted.
| ||||
| NqosMgnt | 1.3.6.1.4.1.52.4.13.3 | |||
| SqosModeControl | 1.3.6.1.4.1.52.4.13.3.1 | INTEGER | RW | |
scalar · INTEGER · read-write · current The administrative status and control of the QoS mode for the QoS management.
| ||||
| TqosMACTypeTable | 1.3.6.1.4.1.52.4.13.3.2 | NA | ||
table · not-accessible · current Table of status information about each configured MAC Type Entry for the QoS Management. | ||||
| RqosMACTypeEntry | 1.3.6.1.4.1.52.4.13.3.2.1 | NA | ||
row · not-accessible · current An entry in the table, containing information about configuration MAC Type Entry for the QoS Management.
| ||||
| CqosMACTypeIndex | 1.3.6.1.4.1.52.4.13.3.2.1.1 | Integer32 (1..2147483647) | NA | |
column · Integer32 (1..2147483647) · not-accessible · current Qos MAC Type index. | ||||
| CqosMACTypeAddress | 1.3.6.1.4.1.52.4.13.3.2.1.2 | MacAddress | RW | |
column · MacAddress · read-write · current This values indicates the MAC address of that specified index in the entry. | ||||
| CqosMACTypePriority | 1.3.6.1.4.1.52.4.13.3.2.1.3 | Integer32 (0..7) | RW | |
column · Integer32 (0..7) · read-write · current This values indicates the level of priority of that specified MAC Address in entry. | ||||
| CqosMACTypeOpeStatus | 1.3.6.1.4.1.52.4.13.3.2.1.4 | INTEGER | RC | |
column · INTEGER · read-create · current This object indicates the status of this entry.
other(0) - this entry is currently in use but
the conditions under which it will remain
so differ from the following values.
valid(1) - this value to indicate this entry is currently
in used.
invalid(2) - write this value to the corresponding entry,
the whole entry will be removed. Since the order of entry
shall be re-order while it has been deleted. To re-freshed
the whole table is recommended for new index.
create(3) - write this value to indicate that the new MAC address
will be added after next writing MAC address to that new entry.
The adding action will be taken on the index that grater than 1.
| ||||
| TqosEtherTypeTable | 1.3.6.1.4.1.52.4.13.3.3 | NA | ||
table · not-accessible · current Table of status information about each configured Ether Type Entry for QoS Management. | ||||
| RqosEtherTypeEntry | 1.3.6.1.4.1.52.4.13.3.3.1 | NA | ||
row · not-accessible · current An entry in the table, containing information about configuration Ether Type for QoS Management.
| ||||
| CqosEtherTypeIndex | 1.3.6.1.4.1.52.4.13.3.3.1.1 | Integer32 | NA | |
column · Integer32 · not-accessible · current Qos Ether Type index in the table. | ||||
| CqosEtherTypeHexValue | 1.3.6.1.4.1.52.4.13.3.3.1.2 | OCTET STRING (SIZE (4)) | RW | |
column · OCTET STRING (SIZE (4)) · read-write · current The Hex Value to indicate the type of Ether of that specified index in the entry. | ||||
| CqosEtherTypePriority | 1.3.6.1.4.1.52.4.13.3.3.1.3 | Integer32 (0..7) | RW | |
column · Integer32 (0..7) · read-write · current This values indicates the level of priority of that specified MAC Address in entry. | ||||
| CqosEtherTypeOpeStatus | 1.3.6.1.4.1.52.4.13.3.3.1.4 | INTEGER | RC | |
column · INTEGER · read-create · current This object indicates the status of this entry.
other(0) - this entry is currently in use but
the conditions under which it will remain
so differ from the following values.
valid(1) - this value to indicate this entry is currently
in used.
invalid(2) - write this value to the corresponding entry,
the whole entry will be removed. Since the order of entry
shall be re-order while it has been deleted. To re-freshed
the whole table is recommended for new index.
create(3) - write this value to indicate that the new Ether Value
will be added after next writing Ether Type Value to that new entry.
The adding action will be taken on the index that grater than 1.
| ||||
| SqosQueueingMode | 1.3.6.1.4.1.52.4.13.3.4 | INTEGER | RW | |
scalar · INTEGER · read-write · current The administrative control of the QoS Queuing mode for the QoS management.
| ||||
| SqosSVPStatus | 1.3.6.1.4.1.52.4.13.3.5 | INTEGER | RW | |
scalar · INTEGER · read-write · current The administrative enable/disable state for SVP.
| ||||
| NlinkQualityMgnt | 1.3.6.1.4.1.52.4.13.4 | |||
| TlinkQualityTable | 1.3.6.1.4.1.52.4.13.4.1 | NA | ||
table · not-accessible · current Table of status information about the radio Interface Link Quality Entry. | ||||
| RlinkQualityEntry | 1.3.6.1.4.1.52.4.13.4.1.1 | NA | ||
row · not-accessible · current An entry in the table, containing information about configuration of the radio Interface Link Quality. | ||||
| ClinkQualityRadioIndex | 1.3.6.1.4.1.52.4.13.4.1.1.1 | Integer32 (1..2147483647) | NA | |
column · Integer32 (1..2147483647) · not-accessible · current This is the value to define the index of the radio interface. | ||||
| ClinkQualityStaIndex | 1.3.6.1.4.1.52.4.13.4.1.1.2 | Integer32 (1..2147483647) | NA | |
column · Integer32 (1..2147483647) · not-accessible · current This is value to define the index of link station. | ||||
| ClinkQualityStaMacAddress | 1.3.6.1.4.1.52.4.13.4.1.1.3 | MacAddress | RO | |
column · MacAddress · read-only · current This values indicates the MAC address of the link station. | ||||
| ClinkQualityStaRssi | 1.3.6.1.4.1.52.4.13.4.1.1.4 | Integer32 (0..100) | RO | |
column · Integer32 (0..100) · read-only · current This values indicates the percentage RSSI of the link station. | ||||
| NapSnmpMgnt | 1.3.6.1.4.1.52.4.13.5 | |||
| StrapControl | 1.3.6.1.4.1.52.4.13.5.1 | INTEGER | RW | |
scalar · INTEGER · read-write · current The administrative enable/disable state for SNMP Trap Control in a System.
| ||||
| NtrapConfiguration | 1.3.6.1.4.1.52.4.13.5.2 | |||
| StrapSysSystemUp | 1.3.6.1.4.1.52.4.13.5.2.1 | INTEGER | RW | |
scalar · INTEGER · read-write · current The administrative enable/disable state for SNMP sysSystemUp trap.
| ||||
| StrapSysSystemDown | 1.3.6.1.4.1.52.4.13.5.2.2 | INTEGER | RW | |
scalar · INTEGER · read-write · current The administrative enable/disable state for SNMP sysSystemDown trap.
| ||||
| StrapSysRadiusServerChanged | 1.3.6.1.4.1.52.4.13.5.2.3 | INTEGER | RW | |
scalar · INTEGER · read-write · current The administrative enable/disable state for SNMP sysRadiusServerChanged trap.
| ||||
| StrapDot11StationAssociation | 1.3.6.1.4.1.52.4.13.5.2.4 | INTEGER | RW | |
scalar · INTEGER · read-write · current The administrative enable/disable state for SNMP dot11StationAssociation trap.
| ||||
| StrapDot11StationReAssociation | 1.3.6.1.4.1.52.4.13.5.2.5 | INTEGER | RW | |
scalar · INTEGER · read-write · current The administrative enable/disable state for SNMP dot11StationReAssociation trap.
| ||||
| StrapDot11StationAuthentication | 1.3.6.1.4.1.52.4.13.5.2.6 | INTEGER | RW | |
scalar · INTEGER · read-write · current The administrative enable/disable state for SNMP dot11StationAuthentication trap.
| ||||
| StrapDot11StationRequestFail | 1.3.6.1.4.1.52.4.13.5.2.7 | INTEGER | RW | |
scalar · INTEGER · read-write · current The administrative enable/disable state for SNMP dot11StationRequestFail trap.
| ||||
| StrapLocalMacAddrAuthFail | 1.3.6.1.4.1.52.4.13.5.2.9 | INTEGER | RW | |
scalar · INTEGER · read-write · current The administrative enable/disable state for SNMP localMacAddrAuthFail trap.
| ||||
| StrapLocalMacAddrAuthSuccess | 1.3.6.1.4.1.52.4.13.5.2.10 | INTEGER | RW | |
scalar · INTEGER · read-write · current The administrative enable/disable state for SNMP localMacAddrAuthSuccess trap.
| ||||
| StrapDot1xAuthNotInitiated | 1.3.6.1.4.1.52.4.13.5.2.11 | INTEGER | RW | |
scalar · INTEGER · read-write · current The administrative enable/disable state for SNMP dot1xAuthNotInitiated trap.
| ||||
| StrapDot1xAuthSuccess | 1.3.6.1.4.1.52.4.13.5.2.12 | INTEGER | RW | |
scalar · INTEGER · read-write · current The administrative enable/disable state for SNMP dot1xAuthSuccess trap.
| ||||
| StrapDot1xAuthFail | 1.3.6.1.4.1.52.4.13.5.2.13 | INTEGER | RW | |
scalar · INTEGER · read-write · current The administrative enable/disable state for SNMP dot1xAuthFail trap.
| ||||
| StrapDot1xMacAddrAuthSuccess | 1.3.6.1.4.1.52.4.13.5.2.14 | INTEGER | RW | |
scalar · INTEGER · read-write · current The administrative enable/disable state for SNMP dot1xMacAddrAuthSuccess trap.
| ||||
| StrapDot1xMacAddrAuthFail | 1.3.6.1.4.1.52.4.13.5.2.15 | INTEGER | RW | |
scalar · INTEGER · read-write · current The administrative enable/disable state for SNMP dot1xMacAddrAuthFail trap.
| ||||
| StrapPppLogonFail | 1.3.6.1.4.1.52.4.13.5.2.16 | INTEGER | RW | |
scalar · INTEGER · read-write · current The administrative enable/disable state for SNMP pppLogonFail trap.
| ||||
| StrapIappStationRoamedFrom | 1.3.6.1.4.1.52.4.13.5.2.17 | INTEGER | RW | |
scalar · INTEGER · read-write · current The administrative enable/disable state for SNMP iappStationRoamedFrom trap.
| ||||
| StrapIappStationRoamedTo | 1.3.6.1.4.1.52.4.13.5.2.18 | INTEGER | RW | |
scalar · INTEGER · read-write · current The administrative enable/disable state for SNMP iappStationRoamedFrom trap.
| ||||
| StrapIappContextDataSent | 1.3.6.1.4.1.52.4.13.5.2.19 | INTEGER | RW | |
scalar · INTEGER · read-write · current The administrative enable/disable state for SNMP iappContextDataSent trap.
| ||||
| StrapSntpServerFail | 1.3.6.1.4.1.52.4.13.5.2.20 | INTEGER | RW | |
scalar · INTEGER · read-write · current The administrative enable/disable state for SNMP sntpServerFail trap.
| ||||
| StrapDot11InterfaceAFail | 1.3.6.1.4.1.52.4.13.5.2.21 | INTEGER | RW | |
scalar · INTEGER · read-write · current The administrative enable/disable state for SNMP dot11InterfaceAFail trap.
| ||||
| StrapDot11InterfaceGFail | 1.3.6.1.4.1.52.4.13.5.2.22 | INTEGER | RW | |
scalar · INTEGER · read-write · current The administrative enable/disable state for SNMP dot11InterfaceGFail trap.
| ||||
| StrapDot11WirelessSTPDetection | 1.3.6.1.4.1.52.4.13.5.2.23 | INTEGER | RW | |
scalar · INTEGER · read-write · current The administrative enable/disable state for SNMP dot11WirelessSTPDetection trap.
| ||||
| TapSnmpTrapDestinationTable | 1.3.6.1.4.1.52.4.13.5.3 | NA | ||
table · not-accessible · current Table of descriptive and status information about configuration of each trap receiving server. | ||||
| RapSnmpTrapDestinationEntry | 1.3.6.1.4.1.52.4.13.5.3.1 | NA | ||
row · not-accessible · current An entry in the table, containing information about configuration of one trap receiving server. | ||||
| CapSnmpTrapDestinationIndex | 1.3.6.1.4.1.52.4.13.5.3.1.1 | INTEGER (1..4) | NA | |
column · INTEGER (1..4) · not-accessible · current Index of the Trap Destination Table. | ||||
| CapSnmpTrapDestinationCommunity | 1.3.6.1.4.1.52.4.13.5.3.1.2 | DisplayString (SIZE (0..32)) | RW | |
column · DisplayString (SIZE (0..32)) · read-write · current The SNMP Trap Community | ||||
| CapSnmpTrapDestinationIP | 1.3.6.1.4.1.52.4.13.5.3.1.3 | IpAddress | RW | |
column · IpAddress · read-write · current The IP address of the trap receiving server. | ||||
| CapSnmpTrapDestinationState | 1.3.6.1.4.1.52.4.13.5.3.1.4 | INTEGER | RW | |
column · INTEGER · read-write · current This value indicates whether the trap receiving server is enabled.
| ||||
| SapSnmpCommunityReadOnly | 1.3.6.1.4.1.52.4.13.5.4 | DisplayString (SIZE (0..32)) | RW | |
scalar · DisplayString (SIZE (0..32)) · read-write · current The SNMP Read Only Community. The value if read, will only show ******. | ||||
| SapSnmpCommunityReadWrite | 1.3.6.1.4.1.52.4.13.5.5 | DisplayString (SIZE (0..32)) | RW | |
scalar · DisplayString (SIZE (0..32)) · read-write · current The SNMP Read Write Community. The value if read, will only show *****. | ||||
| SapSnmpVersionFilter | 1.3.6.1.4.1.52.4.13.5.6 | INTEGER | RW | |
scalar · INTEGER · read-write · current To set the version-filter of SNMP.
| ||||
| NsysEntity | 1.3.6.1.4.1.52.4.13.6 | |||
| SswHardwareVer | 1.3.6.1.4.1.52.4.13.6.1 | DisplayString (SIZE (0..20)) | RO | |
scalar · DisplayString (SIZE (0..20)) · read-only · current Hardware version of the main board. | ||||
| SswBootRomVer | 1.3.6.1.4.1.52.4.13.6.2 | DisplayString (SIZE (0..20)) | RO | |
scalar · DisplayString (SIZE (0..20)) · read-only · current Boot ROM code version of the main board. | ||||
| SswOpCodeVer | 1.3.6.1.4.1.52.4.13.6.3 | DisplayString (SIZE (0..20)) | RO | |
scalar · DisplayString (SIZE (0..20)) · read-only · current Operation code version of the main board. | ||||
| SswSerialNumber | 1.3.6.1.4.1.52.4.13.6.4 | DisplayString (SIZE (0..20)) | RO | |
scalar · DisplayString (SIZE (0..20)) · read-only · current Serial Number of the Access Point. | ||||
| SswProductName | 1.3.6.1.4.1.52.4.13.6.5 | DisplayString (SIZE (0..20)) | RO | |
scalar · DisplayString (SIZE (0..20)) · read-only · current The Product Name of the Access Point. | ||||
| SswCountrySetting | 1.3.6.1.4.1.52.4.13.6.6 | DisplayString (SIZE (0..255)) | RO | |
scalar · DisplayString (SIZE (0..255)) · read-only · current The current CountryCode Setting of the Access Point. | ||||
| NapSecurityMgnt | 1.3.6.1.4.1.52.4.13.7 | |||
| TapRadioSecurityTable | 1.3.6.1.4.1.52.4.13.7.1 | NA | ||
table · not-accessible · current Table of descriptive and status information about configuration of each radio in terms of security settings. | ||||
| RapRadioSecurityEntry | 1.3.6.1.4.1.52.4.13.7.1.1 | NA | ||
row · not-accessible · current An entry in the table, containing information about configuration of one radio of the AP.
| ||||
| CapRadioSecurityIndex | 1.3.6.1.4.1.52.4.13.7.1.1.1 | Integer32 (1..2147483647) | NA | |
column · Integer32 (1..2147483647) · not-accessible · current Radio Index for security settings. | ||||
| CapRadioSecurityWEPAuthType | 1.3.6.1.4.1.52.4.13.7.1.1.2 | INTEGER | RW | |
column · INTEGER · read-write · current This value indicates the type of WEP authentication in use for this radio interface. opensystem(0) Set authentication open sharedkey(1) Set authentication shared wpa(2) Set WPA Mode wpapsk(3) Set WPA-PSK Mode wpa-wpa2-mixed(4) Set WPA-WPA2-Mixed Mode wpawpa2pskmixed(5) Set WPA-WPA2 PSK Mixed Mode wpa2(6) Set WPA2 Mode wpa2psk(7) Set WPA2-PSK Mode
| ||||
| CapRadioSecuritySharedKeyLen | 1.3.6.1.4.1.52.4.13.7.1.1.3 | INTEGER | RO | |
column · INTEGER · read-only · current This value indicates the shared key length for this radio interface.
| ||||
| CapRadioSecurityWPAMode | 1.3.6.1.4.1.52.4.13.7.1.1.4 | INTEGER | RW | |
column · INTEGER · read-write · current This value indicates the state of WPA for this radio interface.
| ||||
| CapRadioSecurityWPAKeyType | 1.3.6.1.4.1.52.4.13.7.1.1.5 | INTEGER | RW | |
column · INTEGER · read-write · current This value indicates the type of WPA Key Management in use for this radio interface.
| ||||
| CapRadioSecurityWPACipher | 1.3.6.1.4.1.52.4.13.7.1.1.6 | INTEGER | RW | obsolete |
column · INTEGER · read-write · obsolete This value indicates the type of WPA Cipher in use for this radio interface.
| ||||
| CapRadioSecurityWPAPSKType | 1.3.6.1.4.1.52.4.13.7.1.1.7 | INTEGER | RW | |
column · INTEGER · read-write · current This value indicates the type of WPA Pre Shared Key in use for this radio interface.
| ||||
| CapRadioSecurityWPAPSK | 1.3.6.1.4.1.52.4.13.7.1.1.8 | DisplayString (SIZE (0..80)) | RW | |
column · DisplayString (SIZE (0..80)) · read-write · current This value indicates WPA Pre Shared Key in use for this radio interface. | ||||
| CapRadioSecurityWEPKeyType | 1.3.6.1.4.1.52.4.13.7.1.1.9 | INTEGER | RW | |
column · INTEGER · read-write · current This value indicates the type of WEP Key in use for this radio interface.
| ||||
| CapRadioSecurityWEPEnabled | 1.3.6.1.4.1.52.4.13.7.1.1.10 | TruthValue | RW | |
column · TruthValue · read-write · current This value indicates whether WEP is enabled. | ||||
| CapRadioSecurityWPACipherSuite | 1.3.6.1.4.1.52.4.13.7.1.1.11 | INTEGER | RW | |
column · INTEGER · read-write · current This value indicates the type of WPA Cipher Suite in use for this radio interface.
| ||||
| CapRadioApSecurityWPAPreAuthentication | 1.3.6.1.4.1.52.4.13.7.1.1.12 | INTEGER | RW | |
column · INTEGER · read-write · current Whether Pre-Authentication is enabled.
| ||||
| CapRadioApSecurityWPAPmksaLifetime | 1.3.6.1.4.1.52.4.13.7.1.1.13 | INTEGER (0..14400) | RW | |
column · INTEGER (0..14400) · read-write · current The number (in minutes) for Pmksa-Lifetime. | ||||
| NapSecuritySsh | 1.3.6.1.4.1.52.4.13.7.2 | |||
| SapSecuritySshServerEnabled | 1.3.6.1.4.1.52.4.13.7.2.1 | TruthValue | RW | |
scalar · TruthValue · read-write · current This value indicates whether SSH server is enabled. | ||||
| SapSecuritySshServerPort | 1.3.6.1.4.1.52.4.13.7.2.2 | Integer32 | RW | |
scalar · Integer32 · read-write · current This value indicates SSH server's port number. | ||||
| SapSecuritySshTelnetServerEnabled | 1.3.6.1.4.1.52.4.13.7.2.3 | TruthValue | RW | |
scalar · TruthValue · read-write · current This value indicates whether telnet server is enabled. | ||||
| NapRadioInterfaceMgnt | 1.3.6.1.4.1.52.4.13.8 | |||
| TenterpriseApRadioTable | 1.3.6.1.4.1.52.4.13.8.2 | NA | ||
table · not-accessible · current Table of descriptive and status information about configuration of each radio. | ||||
| RenterpriseApRadioEntry | 1.3.6.1.4.1.52.4.13.8.2.1 | NA | ||
row · not-accessible · current An entry in the table, containing information about configuration of one radio of the AP. | ||||
| CenterpriseApRadioIndex | 1.3.6.1.4.1.52.4.13.8.2.1.1 | Integer32 (1..2147483647) | NA | |
column · Integer32 (1..2147483647) · not-accessible · current Radio Index for configuration. | ||||
| CenterpriseApRadioAutoChannel | 1.3.6.1.4.1.52.4.13.8.2.1.2 | INTEGER | RW | |
column · INTEGER · read-write · current This value indicates whether auto channel selection is enabled or not for this radio interface
| ||||
| CenterpriseApRadioTransmitPower | 1.3.6.1.4.1.52.4.13.8.2.1.3 | INTEGER | RW | |
column · INTEGER · read-write · current This value indicates the transmit power for this radio interface.
| ||||
| CenterpriseApRadioTurboMode | 1.3.6.1.4.1.52.4.13.8.2.1.4 | INTEGER | RW | |
column · INTEGER · read-write · current This value indicates whether turbo mode is enabled for this radio interface.
| ||||
| CenterpriseApRadioDataRate | 1.3.6.1.4.1.52.4.13.8.2.1.5 | INTEGER | RW | |
column · INTEGER · read-write · current This value indicates the data rate for this radio interface.
Radio interface A operates at 6, 9, 12, 18, 24, 36, 48, 54.
Radio interface G operates all listed data rates. The auto
setting will attempt to set the best data rate for the interface
| ||||
| CenterpriseApRadioGMode | 1.3.6.1.4.1.52.4.13.8.2.1.6 | INTEGER | RW | |
column · INTEGER · read-write · current This value indicates the radio mode for the 802.11g radio. This setting is only valid for the 802.11g interface.
| ||||
| CenterpriseApRadioAntennaMode | 1.3.6.1.4.1.52.4.13.8.2.1.7 | INTEGER | RW | |
column · INTEGER · read-write · current This value indicates the antenna mode in use for the G-radio.
The values are interpreted as follows:
both(1) means use both built-in antennas,
left(2) means use left side.
right(3) means use right side.
invalid(4) means not support.
This setting is only valid for the 802.11g interface.
| ||||
| CrogueApState | 1.3.6.1.4.1.52.4.13.8.2.1.8 | INTEGER | RW | |
column · INTEGER · read-write · current This value is used to enable/disable Rogue Ap Detection for this radio interface.
| ||||
| CrogueApInterval | 1.3.6.1.4.1.52.4.13.8.2.1.9 | INTEGER (30..10080) | RW | |
column · INTEGER (30..10080) · read-write · current How often to scan for Rogue Aps. The interval in minutes, with default of 720(minutes). | ||||
| CrogueApDuration | 1.3.6.1.4.1.52.4.13.8.2.1.10 | INTEGER (200..1000) | RW | |
column · INTEGER (200..1000) · read-write · current How long to scan each channel (in milliseconds). A longer duration will yield more complete results. A shorter duration will allow clients a better chance of remaining connected. Default value is 350(milliseconds). | ||||
| CrogueApScanNow | 1.3.6.1.4.1.52.4.13.8.2.1.11 | INTEGER | RW | |
column · INTEGER · read-write · current When writing the value to enable, the AP will trigger the Rouge AP scan function. The value will always return disable(2).
| ||||
| CenterpriseApRadioAntennaModeControl | 1.3.6.1.4.1.52.4.13.8.2.1.12 | INTEGER | RO | |
column · INTEGER · read-only · current This value indicates which antenna is in use for the radio Interface.
The values are interpreted as follows:
fixed(1) specify to use built-in antennas,
external(2) specify to use one external antenna.
| ||||
| CenterpriseApRadioFixedAntennaType | 1.3.6.1.4.1.52.4.13.8.2.1.13 | INTEGER | RW | |
column · INTEGER · read-write · current This value indicates which antenna type is in use as the fixed antenna is selected.
| ||||
| CenterpriseApRadioAntennaID | 1.3.6.1.4.1.52.4.13.8.2.1.14 | INTEGER | RW | |
column · INTEGER · read-write · current This value indicates which antenna ID will be in use for the radio Interface. | ||||
| CenterpriseApRadioMulticastDataRate | 1.3.6.1.4.1.52.4.13.8.2.1.15 | INTEGER | RW | |
column · INTEGER · read-write · current This value indicates the data rate for mc/bc packets from this radio interface. sixMbps(6), nineMbps(9), twelveMbps(12), eighteenMbps(18), twentyFourMbps(24), thirtySixMbps(36), fortyEightMbps(48), and fiftyFourMbps(54) are for 11a and g-only mode. The default for b-only and b+g mode is oneMbps(1), twoMbps(2), fiveAndHalfMbps(5) and elevenMbps(11).
| ||||
| CenterpriseApRadioAutoDataRate | 1.3.6.1.4.1.52.4.13.8.2.1.16 | INTEGER | RW | |
column · INTEGER · read-write · current This value indicates whether automated data rate is enabled or not for this radio interface
| ||||
| CenterpriseApRadioPreamble | 1.3.6.1.4.1.52.4.13.8.2.1.17 | INTEGER | RW | |
column · INTEGER · read-write · current This value indicates the preamble length of 11g.
The values are interpreted as follows:
long(1) sets the preamble length to long.
short(2) sets the preamble length to short.
invalid(3) means not support.
This setting is only valid for the 802.11g interface.
| ||||
| CenterpriseApRadioSWRetryMode | 1.3.6.1.4.1.52.4.13.8.2.1.18 | INTEGER | RW | |
column · INTEGER · read-write · current This value indicates whether SW retty mode is enabled or not for this radio interface
| ||||
| TenterpriseApVapRadioTable | 1.3.6.1.4.1.52.4.13.8.3 | NA | ||
table · not-accessible · current Table of descriptive and status information about configuration of each Vap radio. | ||||
| RenterpriseApVapRadioEntry | 1.3.6.1.4.1.52.4.13.8.3.1 | NA | ||
row · not-accessible · current An entry in the table, containing information about configuration of one Vap radio of the AP. | ||||
| CenterpriseApVapRadioIndex | 1.3.6.1.4.1.52.4.13.8.3.1.1 | Integer32 (1..2147483647) | NA | |
column · Integer32 (1..2147483647) · not-accessible · current Radio Index for configuration. | ||||
| CenterpriseApVapRadioState | 1.3.6.1.4.1.52.4.13.8.3.1.2 | INTEGER | RW | |
column · INTEGER · read-write · current This value indicates the state of the radio interface.
| ||||
| CenterpriseApVapRadioSecureAccess | 1.3.6.1.4.1.52.4.13.8.3.1.3 | INTEGER | RW | |
column · INTEGER · read-write · current This value indicates whether secure access is enabled for this radio interface.
| ||||
| CenterpriseApVapRadioMaxAssoc | 1.3.6.1.4.1.52.4.13.8.3.1.4 | INTEGER (0..255) | RW | |
column · INTEGER (0..255) · read-write · current This value indicates the max number of clients allowed on this radio interface. | ||||
| CenterpriseApVapRadioTransmitKey | 1.3.6.1.4.1.52.4.13.8.3.1.5 | INTEGER (1..4) | RW | |
column · INTEGER (1..4) · read-write · current This value indicates default transmit key in use for this radio interface. | ||||
| CenterpriseApVapRadioDescription | 1.3.6.1.4.1.52.4.13.8.3.1.6 | DisplayString (SIZE (0..80)) | RW | |
column · DisplayString (SIZE (0..80)) · read-write · current This value indicates the description for this radio interface. | ||||
| CenterpriseApVapRadioDefefaultPriority | 1.3.6.1.4.1.52.4.13.8.3.1.7 | Integer32 (0..7) | RW | |
column · Integer32 (0..7) · read-write · current This values indicates the level of default priority of that specified VAP in entry. | ||||
| TenterpriseApRadioWdsTable | 1.3.6.1.4.1.52.4.13.8.4 | NA | ||
table · not-accessible · current Table of configuration information for Wds for each Radio interface. | ||||
| RenterpriseApRadioWdsEntry | 1.3.6.1.4.1.52.4.13.8.4.1 | NA | ||
row · not-accessible · current An entry in the table, containing information about configuration of peer Bridging for one radio of the AP. The table is indexed by radio Index (corresponding to enterpriseApRadioTable). The table does not contain the radio index as a member of the table. | ||||
| CwdsApRole | 1.3.6.1.4.1.52.4.13.8.4.1.1 | INTEGER | RW | |
column · INTEGER · read-write · current This value indicates the role of the Ap for this radio, roleAp(1): AP operation. roleBridgeMaster(2): Root-Bridge mode. roleBridge(3): Bridge Mode.
| ||||
| CwdsApAckTimeout | 1.3.6.1.4.1.52.4.13.8.4.1.2 | INTEGER | RW | |
column · INTEGER · read-write · current This value indicates the WDS Ack timeout for this radio in us, and the following values can be set to the system: 0 Set wireless Ack Timeout as system default 20 0 to 1 miles: Ack timeout is 20 us 40 1 to 3 miles: Ack timeout is 40 us 75 3 to 6 miles: Ack timeout is 75 us 115 6 to 10 miles: Ack timeout is 115 us | ||||
| TenterpriseApRadioWdsPeerTable | 1.3.6.1.4.1.52.4.13.8.5 | NA | ||
table · not-accessible · current Table of configuration information for Wds Peers for each Radio interface. | ||||
| RenterpriseApRadioWdsPeerEntry | 1.3.6.1.4.1.52.4.13.8.5.1 | NA | ||
row · not-accessible · current An entry in the table, containing information
about configuration of peer Bridging
for one radio of the AP. The table is indexed by radio
Index (corresponding to enterpriseApRadioTable) and the peer
index (Up to 8). The table does not contain the radio index as
a member of the table. | ||||
| CwdsPeerIndex | 1.3.6.1.4.1.52.4.13.8.5.1.1 | Integer32 (1..8) | NA | |
column · Integer32 (1..8) · not-accessible · current Peer Index for the radio interface. | ||||
| CwdsPeerBssid | 1.3.6.1.4.1.52.4.13.8.5.1.2 | DisplayString (SIZE (1..17)) | RW | |
column · DisplayString (SIZE (1..17)) · read-write · current The BSSID for this peer. | ||||
| CwdsPeerRSSI | 1.3.6.1.4.1.52.4.13.8.5.1.3 | Integer32 | RO | |
column · Integer32 · read-only · current This value indicates the RSSI value of the WDS peer link. | ||||
| TenterpriseApRadioWEPKeysTable | 1.3.6.1.4.1.52.4.13.8.6 | NA | ||
table · not-accessible · current Conceptual table for WEP default keys. | ||||
| RenterpriseApRadioWEPKeysEntry | 1.3.6.1.4.1.52.4.13.8.6.1 | NA | ||
row · not-accessible · current An Entry (conceptual row) in the WEP Default Keys Table. A collection of objects containing information used to determine if a WEPkey as been defined and if so, the value of the WEPkey. | ||||
| CenterpriseApRadioWEPKeysIndex | 1.3.6.1.4.1.52.4.13.8.6.1.1 | INTEGER (1..4) | NA | |
column · INTEGER (1..4) · not-accessible · current WEP Key Index for the radio interface. | ||||
| CenterpriseApRadioWEPKeyType | 1.3.6.1.4.1.52.4.13.8.6.1.2 | INTEGER | RO | |
column · INTEGER · read-only · current status of the WEP Key type
| ||||
| CenterpriseApRadioWEPKeyLength | 1.3.6.1.4.1.52.4.13.8.6.1.3 | INTEGER | RO | |
column · INTEGER · read-only · current status of the WEP Key Length.
| ||||
| TenterpriseApRadioAvAntennaListTable | 1.3.6.1.4.1.52.4.13.8.7 | NA | ||
table · not-accessible · current Conceptual table for Available Antenna List used in the Radio. | ||||
| RenterpriseApRadioAvAntennaListEntry | 1.3.6.1.4.1.52.4.13.8.7.1 | NA | ||
row · not-accessible · current An Entry (conceptual row) in the Antenna List Table. A collection of objects containing information used to show if an Antenna as been defined and if so, the value of the antenna Id. | ||||
| CenterpriseApRadioAvAntennaIndex | 1.3.6.1.4.1.52.4.13.8.7.1.1 | INTEGER (1..65535) | NA | |
column · INTEGER (1..65535) · not-accessible · current Available Antenna List Index for the radio interface. | ||||
| CenterpriseApRadioAvAntennaId | 1.3.6.1.4.1.52.4.13.8.7.1.2 | INTEGER | RO | |
column · INTEGER · read-only · current Available antenna Id in the entry. | ||||
| CenterpriseApRadioAvAntennaDesc | 1.3.6.1.4.1.52.4.13.8.7.1.3 | DisplayString (SIZE (0..80)) | RO | |
column · DisplayString (SIZE (0..80)) · read-only · current The description of the antenna ID. | ||||
| TenterpriseApRadioAvChannelListTable | 1.3.6.1.4.1.52.4.13.8.8 | NA | ||
table · not-accessible · current Conceptual table for Available Channel List used in the Radio. | ||||
| RenterpriseApRadioAvChannelListEntry | 1.3.6.1.4.1.52.4.13.8.8.1 | NA | ||
row · not-accessible · current An Entry (conceptual row) in the Channel List Table. A collection of objects containing information used to show if a Channel No. as been defined and if so, the value of the Channel No. | ||||
| CenterpriseApRadioAvChannelIndex | 1.3.6.1.4.1.52.4.13.8.8.1.1 | INTEGER (1..65535) | NA | |
column · INTEGER (1..65535) · not-accessible · current Channel List Index for the radio interface. | ||||
| CenterpriseApRadioAvChannelNo | 1.3.6.1.4.1.52.4.13.8.8.1.2 | INTEGER | RO | |
column · INTEGER · read-only · current Available channel number in the entry | ||||
| NapEtherInterfaceMgnt | 1.3.6.1.4.1.52.4.13.9 | |||
| NapEtherNetConfig | 1.3.6.1.4.1.52.4.13.9.1 | |||
| SnetConfigIPAddress | 1.3.6.1.4.1.52.4.13.9.1.1 | IpAddress | RW | |
scalar · IpAddress · read-write · current The IP address of this Net interface. The default value for this object is 0.0.0.0. If either the netConfigIPAddress or netConfigSubnetMask are 0.0.0.0, then when the device boots, it may use DHCP to try to figure out what these values should be. If DHCP fails, before the device can talk on the network, this value must be configured (e.g., through a terminal attached to the device). | ||||
| SnetConfigSubnetMask | 1.3.6.1.4.1.52.4.13.9.1.2 | IpAddress | RW | |
scalar · IpAddress · read-write · current The subnet mask of this Net interface. The default value for this object is 0.0.0.0. If either the netConfigIPAddress or netConfigSubnetMask are 0.0.0.0, then when the device boots, it may use DHCP to try to figure out what these values should be. If DHCP fails, before the device can talk on the network, this value must be configured (e.g., through a terminal attached to the device). | ||||
| SnetConfigDefaultGateway | 1.3.6.1.4.1.52.4.13.9.1.3 | IpAddress | RW | |
scalar · IpAddress · read-write · current The IP Address of the default gateway. If this value is undefined or unknown, it shall have the value 0.0.0.0. | ||||
| SnetConfigHttpState | 1.3.6.1.4.1.52.4.13.9.1.4 | INTEGER | RW | |
scalar · INTEGER · read-write · current Whether HTTP is enabled.
| ||||
| SnetConfigHttpPort | 1.3.6.1.4.1.52.4.13.9.1.5 | INTEGER (514..65535) | RW | |
scalar · INTEGER (514..65535) · read-write · current The port number for HTTP. | ||||
| SnetConfigHttpsState | 1.3.6.1.4.1.52.4.13.9.1.6 | INTEGER | RW | |
scalar · INTEGER · read-write · current Whether Secure HTTP is enabled.
| ||||
| SnetConfigHttpsPort | 1.3.6.1.4.1.52.4.13.9.1.7 | INTEGER (514..65535) | RW | |
scalar · INTEGER (514..65535) · read-write · current The port number for Secure HTTP. | ||||
| SnetConfigDHCPState | 1.3.6.1.4.1.52.4.13.9.1.8 | INTEGER | RW | |
scalar · INTEGER · read-write · current Whether DHCP is enabled.
| ||||
| NapFilterControlMgnt | 1.3.6.1.4.1.52.4.13.10 | |||
| SapFilterControlBridge | 1.3.6.1.4.1.52.4.13.10.1 | INTEGER | RW | |
scalar · INTEGER · read-write · current This value indicates the local bridge filter setting.
| ||||
| SenterpriseApFilterControlAPManage | 1.3.6.1.4.1.52.4.13.10.2 | INTEGER | RW | |
scalar · INTEGER · read-write · current This value indicates the AP management filter setting.
| ||||
| SenterpriseApFilterControlEthernet | 1.3.6.1.4.1.52.4.13.10.3 | INTEGER | RW | |
scalar · INTEGER · read-write · current This value indicates the ethernet filter setting.
| ||||
| TenterpriseApFilterProtocolTable | 1.3.6.1.4.1.52.4.13.10.4 | NA | ||
table · not-accessible · current Table of descriptive and status information about configuration of the filter protocol table. | ||||
| RenterpriseApFilterProtocolEntry | 1.3.6.1.4.1.52.4.13.10.4.1 | NA | ||
row · not-accessible · current An entry in the filter protocol table, containing information about configuration of one filter table entry. | ||||
| CenterpriseApFilterProtocolIndex | 1.3.6.1.4.1.52.4.13.10.4.1.1 | Integer32 (1..2147483647) | NA | |
column · Integer32 (1..2147483647) · not-accessible · current Index of the Protocol Filters. | ||||
| CenterpriseApFilterProtocolName | 1.3.6.1.4.1.52.4.13.10.4.1.2 | DisplayString | RO | |
column · DisplayString · read-only · current This value indicates the name of the protocol filter. One of the following: Aironet_DDP, Appletalk_ARP, ARP, Banyan, Berkeley_Trailer_Negotiation, CDP, DEC_LAT, DEC_MOP, DEC_MOP_Dump_Load, DEC_XNS, EAPOL, Enet_Config_Test, Ethertalk, IP, LAN_Test, NetBEUI, Novell_IPX(new), Novell_IPX(old), RARP, Telxon_TXP, X.25_Level3 | ||||
| CenterpriseApFilterProtocolISODesignator | 1.3.6.1.4.1.52.4.13.10.4.1.3 | DisplayString | RO | |
column · DisplayString · read-only · current This value indicates the name of the protocol filter. | ||||
| CenterpriseApFilterProtocolState | 1.3.6.1.4.1.52.4.13.10.4.1.4 | INTEGER | RW | |
column · INTEGER · read-write · current This value indicates whether the protocol filter is enabled.
| ||||
| SapvGlobalIBSSRelayMode | 1.3.6.1.4.1.52.4.13.10.5 | INTEGER | RW | |
scalar · INTEGER · read-write · current This value indicates the setting of the global IBSS Relay mode among the VAPs. In Per-VAP Mode enable, the traffic between the VAPs should be blocked. In Al-VAP Mode enable, the traffic between should not be blocked.
| ||||
| TapvFilterControlTable | 1.3.6.1.4.1.52.4.13.10.6 | NA | ||
table · not-accessible · current Table of the control and status information about configuration of the filter Control for each Vap. | ||||
| RapvFilterControlEntry | 1.3.6.1.4.1.52.4.13.10.6.1 | NA | ||
row · not-accessible · current An entry in the table, containing information about configuration of the filter for each Vap of the AP. | ||||
| CapvFilterControlIndex | 1.3.6.1.4.1.52.4.13.10.6.1.1 | Integer32 (1..2147483647) | NA | |
column · Integer32 (1..2147483647) · not-accessible · current Index of the configuration. | ||||
| CapvIBSSFilterControl | 1.3.6.1.4.1.52.4.13.10.6.1.2 | INTEGER | RW | |
column · INTEGER · read-write · current This value indicates the local bridge filter(IBSS Relay Filter) setting.
| ||||
| CapvAPManageFilterControl | 1.3.6.1.4.1.52.4.13.10.6.1.3 | INTEGER | RW | |
column · INTEGER · read-write · current This value indicates the AP management filter setting.
| ||||
| NapVLANMgnt | 1.3.6.1.4.1.52.4.13.11 | |||
| SapVLANMgntNativeId | 1.3.6.1.4.1.52.4.13.11.1 | INTEGER | RW | |
scalar · INTEGER · read-write · current This value indicates the native VLAN Id. | ||||
| SapVLANMgntState | 1.3.6.1.4.1.52.4.13.11.2 | INTEGER | RO | |
scalar · INTEGER · read-only · current This value indicates whether VLANs are enabled or disabled.
| ||||
| SapVLANMgntStateNextBoot | 1.3.6.1.4.1.52.4.13.11.3 | INTEGER | RW | |
scalar · INTEGER · read-write · current This value indicates the VLANs state for the next reset.
| ||||
| TapNativeVlanTable | 1.3.6.1.4.1.52.4.13.11.6 | NA | ||
table · not-accessible · current Table used to manage the Vlans for each wireless interface. | ||||
| RapNativeVlanEntry | 1.3.6.1.4.1.52.4.13.11.6.1 | NA | ||
row · not-accessible · current An entry in the table, containing information about VLAN configuration of one wireless interface. | ||||
| CapNativeVlanIfIndex | 1.3.6.1.4.1.52.4.13.11.6.1.1 | Integer32 (1..2147483647) | NA | |
column · Integer32 (1..2147483647) · not-accessible · current Interface Index of the wireless interface for which the VLAN is assigned to. | ||||
| CapNativeVlanSsidNumber | 1.3.6.1.4.1.52.4.13.11.6.1.2 | Integer32 (1..2147483647) | NA | |
column · Integer32 (1..2147483647) · not-accessible · current Associated Number for Service Set Id (SSID) of the
wireless interface for which the VLAN is assigned to.
Note: This is for future support of multiple SSIDs
per radio interface. | ||||
| CapNativeVlanVlanId | 1.3.6.1.4.1.52.4.13.11.6.1.3 | Integer32 | RW | |
column · Integer32 · read-write · current This value indicates the native VLAN Id of the wireless interface associated with the if index and the SSID number(if it is not 0). | ||||
| CapNativeVlanState | 1.3.6.1.4.1.52.4.13.11.6.1.4 | INTEGER | RW | |
column · INTEGER · read-write · current This value indicates the Native VLANs state.
| ||||
| SapVLANMgntEtherUntaggedVlanId | 1.3.6.1.4.1.52.4.13.11.7 | Integer32 | RW | |
scalar · Integer32 · read-write · current This value indicates the Untagged VlanID for Ether Interface. | ||||
| NapAuthenticationMgnt | 1.3.6.1.4.1.52.4.13.12 | |||
| NapAuthenticationSetupEntry | 1.3.6.1.4.1.52.4.13.12.1 | |||
| Sap8021xState | 1.3.6.1.4.1.52.4.13.12.1.1 | INTEGER | RW | |
scalar · INTEGER · read-write · current This attribute indicates that the Enterprise the state of the 802.1X authentication algorithm.
| ||||
| Sap8021xBroadcastKeyRefreshRate | 1.3.6.1.4.1.52.4.13.12.1.2 | INTEGER (0..1440) | RW | |
scalar · INTEGER (0..1440) · read-write · current The number (in minutes) between changing the broadcast key for 802.1X and WPA clients | ||||
| Sap8021xSessionKeyRefreshRate | 1.3.6.1.4.1.52.4.13.12.1.3 | INTEGER (0..1440) | RW | |
scalar · INTEGER (0..1440) · read-write · current The number (in minutes) between changing session keys for 802.1X and WPA clients | ||||
| Sap8021xReauthenticationTimeout | 1.3.6.1.4.1.52.4.13.12.1.4 | INTEGER (0..1440) | RW | |
scalar · INTEGER (0..1440) · read-write · current The number (in minutes) between forcing 802.1X clients to reauthenticate | ||||
| SapAuthenticationMode | 1.3.6.1.4.1.52.4.13.12.1.5 | INTEGER | RW | |
scalar · INTEGER · read-write · current This value indicates the type of MAC authentication or RADIUS authentication in use, or not in use.
| ||||
| TapAuthenticationServerTable | 1.3.6.1.4.1.52.4.13.12.2 | NA | ||
table · not-accessible · current Table of descriptive and status information about configuration of each authentication server. | ||||
| RapAuthenticationServerEntry | 1.3.6.1.4.1.52.4.13.12.2.1 | NA | ||
row · not-accessible · current An entry in the table, containing information about configuration of one authentication server of the AP. | ||||
| CapAuthenticationServerIndex | 1.3.6.1.4.1.52.4.13.12.2.1.1 | Integer32 (1..2147483647) | NA | |
column · Integer32 (1..2147483647) · not-accessible · current Index of the Authentication Server | ||||
| CapAuthenticationServer | 1.3.6.1.4.1.52.4.13.12.2.1.2 | DisplayString (SIZE (1..64)) | RW | |
column · DisplayString (SIZE (1..64)) · read-write · current This value indicates the IP address or host name of the authentication server. | ||||
| CapAuthenticationPort | 1.3.6.1.4.1.52.4.13.12.2.1.3 | INTEGER (1024..65535) | RW | |
column · INTEGER (1024..65535) · read-write · current This value indicates the UDP Port used by the authentication server. | ||||
| CapAuthenticationKey | 1.3.6.1.4.1.52.4.13.12.2.1.4 | DisplayString (SIZE (0..64)) | RW | |
column · DisplayString (SIZE (0..64)) · read-write · current This value indicates the shared key used by the authentication server. | ||||
| CapAuthenticationRetransmit | 1.3.6.1.4.1.52.4.13.12.2.1.5 | INTEGER (1..30) | RW | |
column · INTEGER (1..30) · read-write · current This value indicates the retransmit timer length used by the authentication server. | ||||
| CapAuthenticationTimeout | 1.3.6.1.4.1.52.4.13.12.2.1.6 | INTEGER (1..60) | RW | |
column · INTEGER (1..60) · read-write · current This value indicates the Timeout value(sec) used by the authentication server. | ||||
| CapAuthenticationAcctPort | 1.3.6.1.4.1.52.4.13.12.2.1.7 | INTEGER (0..65535) | RW | |
column · INTEGER (0..65535) · read-write · current UDP Accounting Port. The valid range is from 1024-65535. A value of 0 means accounting is disabled. | ||||
| CapAuthenticationAcctInterimUpdate | 1.3.6.1.4.1.52.4.13.12.2.1.8 | INTEGER (60..86400) | RW | |
column · INTEGER (60..86400) · read-write · current The interval between sending accounting updates. | ||||
| CapAuthenticationAcctState | 1.3.6.1.4.1.52.4.13.12.2.1.9 | INTEGER | RW | |
column · INTEGER · read-write · current This value indicates whether the Accounting Server is enabled.
| ||||
| TapAuthenticationSupplicantTable | 1.3.6.1.4.1.52.4.13.12.3 | NA | ||
table · not-accessible · current Table of descriptive and status information about configuration of supplicant | ||||
| RapAuthenticationSupplicantEntry | 1.3.6.1.4.1.52.4.13.12.3.1 | NA | ||
row · not-accessible · current An entry in the table, containing information about configuration of one supplicant.
| ||||
| Cap8021xSuppIndex | 1.3.6.1.4.1.52.4.13.12.3.1.1 | Integer32 (1..2147483647) | NA | |
column · Integer32 (1..2147483647) · not-accessible · current Index of the interface for which this supplicant is running. Currently only the ethernet interface. | ||||
| Cap8021xSuppState | 1.3.6.1.4.1.52.4.13.12.3.1.2 | INTEGER | RW | |
column · INTEGER · read-write · current This object is used to enable or disable the 802.1X supplicant.
| ||||
| Cap8021xSuppUser | 1.3.6.1.4.1.52.4.13.12.3.1.3 | DisplayString (SIZE (1..32)) | RW | |
column · DisplayString (SIZE (1..32)) · read-write · current This value indicates the username for supplicant. If value is configured, will display ****. Else will display EMPTY. | ||||
| Cap8021xSuppPasswd | 1.3.6.1.4.1.52.4.13.12.3.1.4 | DisplayString (SIZE (1..32)) | RW | |
column · DisplayString (SIZE (1..32)) · read-write · current This value indicates the password for supplicant. If value is configured, will display ****. Else will display EMPTY. | ||||
| TapvAuthenticationSetupTable | 1.3.6.1.4.1.52.4.13.12.4 | NA | ||
table · not-accessible · current Table of descriptive and status information about configuration of 8021x for each Vap. | ||||
| RapvAuthenticationSetupEntry | 1.3.6.1.4.1.52.4.13.12.4.1 | NA | ||
row · not-accessible · current An entry in the table, containing information about configuration of 8021x for each Vap of the AP.
| ||||
| Capv8021xIndex | 1.3.6.1.4.1.52.4.13.12.4.1.1 | Integer32 (1..2147483647) | NA | |
column · Integer32 (1..2147483647) · not-accessible · current Index for configuration. | ||||
| Capv8021xState | 1.3.6.1.4.1.52.4.13.12.4.1.2 | INTEGER | RW | |
column · INTEGER · read-write · current This attribute indicates that the Enterprise the state of the 802.1X authentication algorithm.
| ||||
| Capv8021xBroadcastKeyRefreshRate | 1.3.6.1.4.1.52.4.13.12.4.1.3 | INTEGER (0..1440) | RW | |
column · INTEGER (0..1440) · read-write · current The number (in minutes) between changing the broadcast key for 802.1X and WPA clients | ||||
| Capv8021xSessionKeyRefreshRate | 1.3.6.1.4.1.52.4.13.12.4.1.4 | INTEGER (0..1440) | RW | |
column · INTEGER (0..1440) · read-write · current The number (in minutes) between changing history keys for 802.1X and WPA clients | ||||
| Capv8021xReauthenticationTimeout | 1.3.6.1.4.1.52.4.13.12.4.1.5 | INTEGER (0..65535) | RW | |
column · INTEGER (0..65535) · read-write · current The number (in minutes) between forcing 802.1X clients to reauthenticate | ||||
| CapvMACAuthenticationMode | 1.3.6.1.4.1.52.4.13.12.4.1.6 | INTEGER | RW | |
column · INTEGER · read-write · current This value indicates the mode of MAC authentication in use.
| ||||
| CapvMACAuthenticationTimeout | 1.3.6.1.4.1.52.4.13.12.4.1.7 | INTEGER (0..65535) | RW | |
column · INTEGER (0..65535) · read-write · current The number (in minutes) between forcing RADIUS MAC to authenticate. | ||||
| CapvMACAuthenticationPasswd | 1.3.6.1.4.1.52.4.13.12.4.1.8 | DisplayString (SIZE (1..31)) | RW | |
column · DisplayString (SIZE (1..31)) · read-write · current This value indicates the password for MAC RADIUS Authentication. If value is configured, will display ****. Else will display EMPTY. | ||||
| NapWStationSessionMgnt | 1.3.6.1.4.1.52.4.13.13 | |||
| TapWStationSessionTable | 1.3.6.1.4.1.52.4.13.13.1 | NA | ||
table · not-accessible · current This table list all sessions (wireless stations) status | ||||
| RapWStationSessionEntry | 1.3.6.1.4.1.52.4.13.13.1.1 | NA | ||
row · not-accessible · current An entry in the table, containing information about status and statistics of the wireless station. | ||||
| CapWStationSessionIfIndex | 1.3.6.1.4.1.52.4.13.13.1.1.1 | Integer32 (1..2147483647) | NA | |
column · Integer32 (1..2147483647) · not-accessible · current Interface index for the radio this session is associated with. | ||||
| CapWStationSessionStationAddres | 1.3.6.1.4.1.52.4.13.13.1.1.2 | MacAddress | NA | |
column · MacAddress · not-accessible · current The unique MAC Address of the station for this session. | ||||
| CapWStationSessionAuthenticated | 1.3.6.1.4.1.52.4.13.13.1.1.3 | TruthValue | RO | |
column · TruthValue · read-only · current Whether the session is authenticated or not. | ||||
| CapWStationSessionAssociated | 1.3.6.1.4.1.52.4.13.13.1.1.4 | TruthValue | RO | |
column · TruthValue · read-only · current Whether the session is associated or not. It is rare case that not associated stations show up in the table. | ||||
| CapWStationSessionIsForwarding | 1.3.6.1.4.1.52.4.13.13.1.1.5 | TruthValue | RO | |
column · TruthValue · read-only · current Whether the AP is forwarding the client station traffic (higher level authentication) | ||||
| CapWStationSessionKeyType | 1.3.6.1.4.1.52.4.13.13.1.1.6 | INTEGER | RO | |
column · INTEGER · read-only · current The encryption key type used by the station. Note that wpa-wep is not supported
| ||||
| CapWStationSessionAssociationId | 1.3.6.1.4.1.52.4.13.13.1.1.7 | Integer32 | RO | |
column · Integer32 · read-only · current The internal association identify number | ||||
| CapWStationSessionLastAuthenticatedTime | 1.3.6.1.4.1.52.4.13.13.1.1.8 | TimeTicks | RO | |
column · TimeTicks · read-only · current This is the time in hundredths of a second last time the client is authenticated. Note that a session may be authenticated multiple times. The value is related to the system startup | ||||
| CapWStationSessionAssociatedTime | 1.3.6.1.4.1.52.4.13.13.1.1.9 | TimeTicks | RO | |
column · TimeTicks · read-only · current This is the time in hundredths of a second since the client associated. The value is related to the system startup | ||||
| CapWStationSessionLastAssociatedTime | 1.3.6.1.4.1.52.4.13.13.1.1.10 | TimeTicks | RO | |
column · TimeTicks · read-only · current This is the time in hundredths of a second when the client associated in last session. The value is related to the system startup | ||||
| CapWStationSessionLastDisassociatedTime | 1.3.6.1.4.1.52.4.13.13.1.1.11 | TimeTicks | RO | |
column · TimeTicks · read-only · current This is the time in hundredths of a second when the client disassociated in last session. The value is related to the system startup | ||||
| CapWStationSessionTxPacketCount | 1.3.6.1.4.1.52.4.13.13.1.1.12 | Counter32 | RO | |
column · Counter32 · read-only · current This is the number of packets transmitted from the client to the AP. It includes data, control and management packets. | ||||
| CapWStationSessionRxPacketCount | 1.3.6.1.4.1.52.4.13.13.1.1.13 | Counter32 | RO | |
column · Counter32 · read-only · current This is the number of unicast packets transmitted from the AP to the client. It includes data, control and management packets. | ||||
| CapWStationSessionTxByteCount | 1.3.6.1.4.1.52.4.13.13.1.1.14 | Counter32 | RO | |
column · Counter32 · read-only · current This is the number of bytes transmitted from the client to the AP. It includes the bytes of data, control and management packets. | ||||
| CapWStationSessionRxByteCount | 1.3.6.1.4.1.52.4.13.13.1.1.15 | Counter32 | RO | |
column · Counter32 · read-only · current This is the number of unicast bytes transmitted from the AP to the client. It includes the bytes of data, control and management packets. | ||||
| CapWStationSessionVlanID | 1.3.6.1.4.1.52.4.13.13.1.1.16 | INTEGER | RO | |
column · INTEGER · read-only · current The current VLAN Id used by the station. | ||||
| NapRogueApMgnt | 1.3.6.1.4.1.52.4.13.14 | |||
| TrogueApDetectionTable | 1.3.6.1.4.1.52.4.13.14.1 | NA | ||
table · not-accessible · current Table of each AP that has been detected. | ||||
| RrogueApDetectionEntry | 1.3.6.1.4.1.52.4.13.14.1.1 | NA | ||
row · not-accessible · current An entry in the table, containing information about any AP detected.
| ||||
| CrogueApIndex | 1.3.6.1.4.1.52.4.13.14.1.1.1 | INTEGER (1..128) | NA | |
column · INTEGER (1..128) · not-accessible · current Monotonically increasing index. | ||||
| CrogueApBssid | 1.3.6.1.4.1.52.4.13.14.1.1.2 | DisplayString (SIZE (0..6)) | RO | |
column · DisplayString (SIZE (0..6)) · read-only · current The AP BSSID | ||||
| CrogueApSsid | 1.3.6.1.4.1.52.4.13.14.1.1.3 | DisplayString (SIZE (0..40)) | RO | |
column · DisplayString (SIZE (0..40)) · read-only · current The AP SSID | ||||
| CrogueApPortNumber | 1.3.6.1.4.1.52.4.13.14.1.1.4 | Integer32 | RO | |
column · Integer32 · read-only · current Interface index for the radio. | ||||
| CrogueApChannelNumber | 1.3.6.1.4.1.52.4.13.14.1.1.5 | Integer32 | RO | |
column · Integer32 · read-only · current Channel where Ap detected. | ||||
| CrogueApRSSIValue | 1.3.6.1.4.1.52.4.13.14.1.1.6 | Integer32 | RO | |
column · Integer32 · read-only · current RSSI for AP detected. | ||||
| NapRougeApControl | 1.3.6.1.4.1.52.4.13.14.2 | |||
| SrogueApRADIUSAuthenticate | 1.3.6.1.4.1.52.4.13.14.2.1 | INTEGER | RW | |
scalar · INTEGER · read-write · current Value is used to enable/disable RADIUS Authentication.
| ||||
| SrogueApClear | 1.3.6.1.4.1.52.4.13.14.2.2 | INTEGER | RW | |
scalar · INTEGER · read-write · current This object is set to clear(1) to clear the Rogue AP detection table. When read, the value will have no meaning.
| ||||
| NapAdminMgnt | 1.3.6.1.4.1.52.4.13.15 | |||
| SapAdminUsername | 1.3.6.1.4.1.52.4.13.15.1 | DisplayString (SIZE (0..16)) | RW | |
scalar · DisplayString (SIZE (0..16)) · read-write · current This value indicates the username for management login. | ||||
| SappAdminPassword | 1.3.6.1.4.1.52.4.13.15.2 | DisplayString (SIZE (0..16)) | RW | |
scalar · DisplayString (SIZE (0..16)) · read-write · current This value indicates the password for management login. | ||||
| NapResetMgt | 1.3.6.1.4.1.52.4.13.16 | |||
| SapRestartOpCodeFile | 1.3.6.1.4.1.52.4.13.16.1 | DisplayString (SIZE (0..127)) | RW | |
scalar · DisplayString (SIZE (0..127)) · read-write · current Name of op-code file for start-up. | ||||
| SapRestartControl | 1.3.6.1.4.1.52.4.13.16.2 | INTEGER | RW | |
scalar · INTEGER · read-write · current Setting this object to warmBoot(2) causes the device to restart the application software with current configuration parameters saved in non-volatile memory. Setting this object to coldBoot(3) causes the device to reinitialize configuration parameters in non-volatile memory to default values and restart the application software. When the device is running normally, this variable has a value of running(1).
| ||||
| NapSNTPMgnt | 1.3.6.1.4.1.52.4.13.17 | |||
| SapSNTPState | 1.3.6.1.4.1.52.4.13.17.1 | INTEGER | RW | |
scalar · INTEGER · read-write · current This value indicates whether SNTP is enabled or not. At least one of the SNTP servers must have a valid IP address before SNTP can be enabled.
| ||||
| SapSNTPPrimaryServer | 1.3.6.1.4.1.52.4.13.17.2 | IpAddress | RW | |
scalar · IpAddress · read-write · current This value indicates the IP address of the primary SNTP server. | ||||
| SapSNTPSecondaryServer | 1.3.6.1.4.1.52.4.13.17.3 | IpAddress | RW | |
scalar · IpAddress · read-write · current This value indicates the IP address of the secondary SNTP server. | ||||
| SapSNTPTimezone | 1.3.6.1.4.1.52.4.13.17.4 | INTEGER | RW | |
scalar · INTEGER · read-write · current This value indicates which timezone to use.
| ||||
| SapSNTPDST | 1.3.6.1.4.1.52.4.13.17.5 | INTEGER | RW | |
scalar · INTEGER · read-write · current This value indicates whether Daylight Savings Time is enabled or not.
| ||||
| SapSNTPDSTStartMonth | 1.3.6.1.4.1.52.4.13.17.6 | INTEGER (1..12) | RW | |
scalar · INTEGER (1..12) · read-write · current This value indicates the starting month for Daylight Savings Time. | ||||
| SapSNTPDSTStartDay | 1.3.6.1.4.1.52.4.13.17.7 | INTEGER (1..31) | RW | |
scalar · INTEGER (1..31) · read-write · current This value indicates the starting day for Daylight Savings Time. | ||||
| SapSNTPDSTEndMonth | 1.3.6.1.4.1.52.4.13.17.8 | INTEGER (1..12) | RW | |
scalar · INTEGER (1..12) · read-write · current This value indicates the ending month for Daylight Savings Time. | ||||
| SapSNTPDSTEndDay | 1.3.6.1.4.1.52.4.13.17.9 | INTEGER (1..31) | RW | |
scalar · INTEGER (1..31) · read-write · current This value indicates the ending day for Daylight Savings Time. | ||||
| NapDNSMgnt | 1.3.6.1.4.1.52.4.13.18 | |||
| SapDNSPrimaryServer | 1.3.6.1.4.1.52.4.13.18.1 | IpAddress | RW | |
scalar · IpAddress · read-write · current This value indicates the IP address of the primary DNS server. | ||||
| SapDNSSecondaryServer | 1.3.6.1.4.1.52.4.13.18.2 | IpAddress | RW | |
scalar · IpAddress · read-write · current This value indicates the IP address of the secondary DNS server. | ||||
| NapIappMgnt | 1.3.6.1.4.1.52.4.13.19 | |||
| SapIappEnabled | 1.3.6.1.4.1.52.4.13.19.1 | INTEGER | RW | |
scalar · INTEGER · read-write · current Whether IAPP is enabled.
| ||||
| NapSyslogConfigMgnt | 1.3.6.1.4.1.52.4.13.20 | |||
| SapLogConfigState | 1.3.6.1.4.1.52.4.13.20.1 | INTEGER | RW | |
scalar · INTEGER · read-write · current This value indicates whether syslog is enabled.
| ||||
| SapSyslogConsoleState | 1.3.6.1.4.1.52.4.13.20.2 | INTEGER | RW | |
scalar · INTEGER · read-write · current This value indicates whether syslog console logging is enabled.
| ||||
| SapSyslogLevel | 1.3.6.1.4.1.52.4.13.20.3 | INTEGER | RW | |
scalar · INTEGER · read-write · current This value indicates the syslog logging level.
| ||||
| TapSyslogServerTable | 1.3.6.1.4.1.52.4.13.20.4 | NA | ||
table · not-accessible · current Table of descriptive and status information about configuration of each syslog server. | ||||
| RapSyslogServerEntry | 1.3.6.1.4.1.52.4.13.20.4.1 | NA | ||
row · not-accessible · current An entry in the table, containing information about configuration of one syslog server of the AP.
| ||||
| CapSyslogServerIndex | 1.3.6.1.4.1.52.4.13.20.4.1.1 | Integer32 (1..4) | NA | |
column · Integer32 (1..4) · not-accessible · current Index of the Syslog Server | ||||
| CapSyslogServerState | 1.3.6.1.4.1.52.4.13.20.4.1.2 | INTEGER | RW | |
column · INTEGER · read-write · current This value indicates whether the syslog server is enabled.
| ||||
| CapSyslogServerIPAddress | 1.3.6.1.4.1.52.4.13.20.4.1.3 | DisplayString (SIZE (1..32)) | RW | |
column · DisplayString (SIZE (1..32)) · read-write · current This value indicates the IP address of the syslog server. | ||||
| CapSyslogServerPort | 1.3.6.1.4.1.52.4.13.20.4.1.4 | INTEGER (1024..65535) | RW | |
column · INTEGER (1024..65535) · read-write · current This value indicates the UDP Port used by the syslog server. | ||||
| NapEventLogMgnt | 1.3.6.1.4.1.52.4.13.21 | |||
| TapEventLogTable | 1.3.6.1.4.1.52.4.13.21.1 | NA | ||
table · not-accessible · current This table is a snapshot of the current event log. | ||||
| RapEventLogEntry | 1.3.6.1.4.1.52.4.13.21.1.1 | NA | ||
row · not-accessible · current An entry in the table, containing one message from the event log.
| ||||
| CapEventLogIndex | 1.3.6.1.4.1.52.4.13.21.1.1.1 | INTEGER (1..128) | NA | |
column · INTEGER (1..128) · not-accessible · current Index of the Event Log Message | ||||
| CapEventLogMessage | 1.3.6.1.4.1.52.4.13.21.1.1.2 | DisplayString (SIZE (0..256)) | RO | |
column · DisplayString (SIZE (0..256)) · read-only · current The Event Log Message | ||||
| SapEventLogClear | 1.3.6.1.4.1.52.4.13.21.2 | INTEGER | RW | |
scalar · INTEGER · read-write · current This object is set to 1 to clear the event log. When read, the value will have no meaning.
| ||||
| NapWSLSupportMgnt | 1.3.6.1.4.1.52.4.13.22 | |||
| SapWSLSupportControl | 1.3.6.1.4.1.52.4.13.22.1 | INTEGER | RW | |
scalar · INTEGER · read-write · current The administrative enable/disable state for the control of the WSL function.
| ||||
| SapWSLSupportMasterAddress | 1.3.6.1.4.1.52.4.13.22.2 | DisplayString (SIZE (1..32)) | RW | |
scalar · DisplayString (SIZE (1..32)) · read-write · current This value indicates IP address of the main WSL. | ||||
| SapWSLSupportSecondaryAddress | 1.3.6.1.4.1.52.4.13.22.3 | DisplayString (SIZE (1..32)) | RW | |
scalar · DisplayString (SIZE (1..32)) · read-write · current This value indicates IP address of the peer WSL. | ||||
| SapWSLSupportPort | 1.3.6.1.4.1.52.4.13.22.4 | INTEGER (1024..65535) | RW | |
scalar · INTEGER (1024..65535) · read-write · current This value indicates the TCP Port used by the WSL server. | ||||
| SapWSLSupportHeartbeatInterval | 1.3.6.1.4.1.52.4.13.22.5 | INTEGER (1..65535) | RW | |
scalar · INTEGER (1..65535) · read-write · current This value indicates the WSL Heartbeat Interval. | ||||
| SapWSLSupportHeartbeatLastChange | 1.3.6.1.4.1.52.4.13.22.6 | DisplayString (SIZE (1..20)) | RO | |
scalar · DisplayString (SIZE (1..20)) · read-only · current The sysUpTime at which the Heartbeat was last modified. The format is defined as hh:mm:ss - dd:mm:yy | ||||
| SapWSLSupportOperationMode | 1.3.6.1.4.1.52.4.13.22.7 | INTEGER | RW | |
scalar · INTEGER · read-write · current This attribute indicates that the WSL Operation Mode in 0: AP in standalone mode, or 1: AP in ETS WSL managed mode (associated mode).
| ||||
| SapWSLSupportRxThreshold | 1.3.6.1.4.1.52.4.13.22.8 | INTEGER (-128..127) | RW | |
scalar · INTEGER (-128..127) · read-write · current This value indicates the WSL CCA rejection threshold in dBm scale. | ||||
| SapWSLSupportControlStatus | 1.3.6.1.4.1.52.4.13.22.9 | INTEGER | RO | |
scalar · INTEGER · read-only · current The operative enable/disable state for the control of the WSL function.
| ||||
| SapWSLRFAreaPollControl | 1.3.6.1.4.1.52.4.13.22.10 | INTEGER | RO | |
scalar · INTEGER · read-only · current The administrative enable/disable state for the control of the WSL RF Area Poll function.
| ||||
| SapWSLRFAreaPollControlStatus | 1.3.6.1.4.1.52.4.13.22.11 | INTEGER | RO | |
scalar · INTEGER · read-only · current The operative enable/disable state for the control of the WSL RF Area Poll function.
| ||||
| NapWMMMgnt | 1.3.6.1.4.1.52.4.13.23 | |||
| TapWMMControlTable | 1.3.6.1.4.1.52.4.13.23.1 | NA | ||
table · not-accessible · current Table for WMM configuration per radio. | ||||
| RapWMMControlEntry | 1.3.6.1.4.1.52.4.13.23.1.1 | NA | ||
| CapWMMState | 1.3.6.1.4.1.52.4.13.23.1.1.1 | INTEGER | RW | |
column · INTEGER · read-write · current This value indicates the WMM state.
| ||||
| TapWMMBssParamTable | 1.3.6.1.4.1.52.4.13.23.2 | NA | ||
table · not-accessible · current Conceptual table for EDCA default parameter values at a non-AP
QSTA. This table shall contain the four entries of the EDCA
parameters corresponding to four possible ACs (access category):
1) AC_BE (best effort, ACI=0)
2) AC_BK (background, ACI=1)
3) AC_VI (video, ACI=2)
4) AC_VO (voice, ACI=3) | ||||
| RapWMMBssParamEntry | 1.3.6.1.4.1.52.4.13.23.2.1 | NA | ||
row · not-accessible · current An Entry (conceptual row) in the apWMMBssParamTable. ifIndex - Each IEEE 802.11 interface is represented by an ifEntry. Interface tables in this MIB module are indexed by ifIndex.
| ||||
| CapWMMBssParamIndex | 1.3.6.1.4.1.52.4.13.23.2.1.1 | INTEGER (1..4) | NA | |
column · INTEGER (1..4) · not-accessible · current The index used to identify instances of the columnar
objects in the apWMMBssParam Table. The value of this variable is
1) 1 AC_BE (best effort, ACI=0)
2) 2 AC_BK (background, ACI=1)
3) 3 AC_VI (video, ACI=2)
4) 4 AC_VO (voice, ACI=3) | ||||
| CapWMMBssParamCWmin | 1.3.6.1.4.1.52.4.13.23.2.1.2 | INTEGER (1..15) | RW | |
column · INTEGER (1..15) · read-write · current This attribute shall specify the value of the minimum size of the window in the exponent form that shall be used by a QSTA for a particular AC for generating a random number for the backoff. | ||||
| CapWMMBssParamCWmax | 1.3.6.1.4.1.52.4.13.23.2.1.3 | INTEGER (1..15) | RW | |
column · INTEGER (1..15) · read-write · current This attribute shall specify the value of the maximum size of the window in the exponent form that shall be used by a QSTA for a particular AC for generating a random number for the backoff. | ||||
| CapWMMBssParamAIFSN | 1.3.6.1.4.1.52.4.13.23.2.1.4 | INTEGER (1..15) | RW | |
column · INTEGER (1..15) · read-write · current This attribute shall specify the number of slots, after a SIFS duration, that the QSTA, for a particular AC, shall sense the medium idle either before transmitting or executing a backoff. | ||||
| CapWMMBssParamTXOPLimit | 1.3.6.1.4.1.52.4.13.23.2.1.5 | INTEGER (0..65535) | RW | |
column · INTEGER (0..65535) · read-write · current This attribute shall specify the maximum time of an TXOP in units of 32 microseconds for a given AC at a non-AP QSTA. | ||||
| CapWMMBssParamAdmissionControl | 1.3.6.1.4.1.52.4.13.23.2.1.6 | TruthValue | RW | |
column · TruthValue · read-write · current This attribute, when TRUE, indicates that admission control is mandatory for the given AC. When False, this attribute indicates that the admission control is not mandatory for the given AC. The default value for this parameter shall be FALSE. | ||||
| TapWMMApParamTable | 1.3.6.1.4.1.52.4.13.23.3 | NA | ||
table · not-accessible · current Conceptual table for EDCA default parameter values at the QAP.
This table shall contain the four entries of the EDCA
parameters corresponding to four possible ACs (access category):
1) AC_BE (best effort, ACI=0)
2) AC_BK (background, ACI=1)
3) AC_VI (video, ACI=2)
4) AC_VO (voice, ACI=3) | ||||
| RapWMMApParamEntry | 1.3.6.1.4.1.52.4.13.23.3.1 | NA | ||
row · not-accessible · current An Entry (conceptual row) in the apWMMApParamTable. ifIndex - Each IEEE 802.11 interface is represented by an ifEntry. Interface tables in this MIB module are indexed by ifIndex.
| ||||
| CapWMMApParamIndex | 1.3.6.1.4.1.52.4.13.23.3.1.1 | INTEGER (1..4) | NA | |
column · INTEGER (1..4) · not-accessible · current The index used to identify instances of the columnar
objects in the apWMMApParam Table. The value of this variable is
1) 1 AC_BE (best effort, ACI=0)
2) 2 AC_BK (background, ACI=1)
3) 3 AC_VI (video, ACI=2)
4) 4 AC_VO (voice, ACI=3) | ||||
| CapWMMApParamCWmin | 1.3.6.1.4.1.52.4.13.23.3.1.2 | INTEGER (1..15) | RW | |
column · INTEGER (1..15) · read-write · current This attribute shall specify the value of the minimum size of the window in the exponent form that shall be used by a QAP for a particular AC for generating a random number for the backoff. | ||||
| CapWMMApParamCWmax | 1.3.6.1.4.1.52.4.13.23.3.1.3 | INTEGER (1..15) | RW | |
column · INTEGER (1..15) · read-write · current This attribute shall specify the value of the maximum size of the window in the exponent form that shall be used by a QAP for a particular AC for generating a random number for the backoff. | ||||
| CapWMMApParamAIFSN | 1.3.6.1.4.1.52.4.13.23.3.1.4 | INTEGER (1..15) | RW | |
column · INTEGER (1..15) · read-write · current This attribute shall specify the number of slots, after a SIFS duration, that the QAP, for a particular AC, shall sense the medium idle either before transmitting or executing a backoff. | ||||
| CapWMMApParamTXOPLimit | 1.3.6.1.4.1.52.4.13.23.3.1.5 | INTEGER (0..65535) | RW | |
column · INTEGER (0..65535) · read-write · current This attribute shall specify the maximum time of an TXOP in units of 32 microseconds for a given AC at a QAP. | ||||
| CapWMMApParamAdmissionControl | 1.3.6.1.4.1.52.4.13.23.3.1.6 | TruthValue | RW | |
column · TruthValue · read-write · current This attribute, when TRUE, indicates that admission control is mandatory for the given AC. When False, this attribute indicates that the admission control is not mandatory for the given AC. The default value for this parameter shall be FALSE. | ||||
| NapNotificationTrapTree | 1.3.6.1.4.1.52.4.13.100 | |||
| NapNotificationObjects | 1.3.6.1.4.1.52.4.13.100.1 | |||
| SapNotificationDot11MacAddr | 1.3.6.1.4.1.52.4.13.100.1.1 | MacAddress | RO | |
scalar · MacAddress · read-only · current Mac Address of the affected interface, returned with traps only. | ||||
| SapNotificationDot11Station | 1.3.6.1.4.1.52.4.13.100.1.2 | MacAddress | RO | |
scalar · MacAddress · read-only · current This attribute holds the MAC address of the wireless station | ||||
| SapNotificationDot11RequestType | 1.3.6.1.4.1.52.4.13.100.1.3 | INTEGER | RO | |
scalar · INTEGER · read-only · current This attribute defines the request type sent by the station. Value = 1: Unknown request type Value = 2: Association Request Value = 3: Re-association Request Value = 4: Authentication
| ||||
| SapNotificationDot11ReasonCode | 1.3.6.1.4.1.52.4.13.100.1.4 | INTEGER | RO | |
scalar · INTEGER · read-only · current This attribute defines the reason for the failure of an operation.
Value = 1: Invalid mode/state
Value = 2: Station not authenticated.
Value = 3: Internal error
Value = 4: Out of sequence frame
Value = 5: Un-supported algorithm
Value = 6: Invalid frame length
Value = 7: WEP is required on the AP
Value = 8: WEP not allowed
Value = 9: Challenge text mismatch
| ||||
| SapNotificationDot11IpAddress | 1.3.6.1.4.1.52.4.13.100.1.5 | IpAddress | RO | |
scalar · IpAddress · read-only · current This value indicates the IP address of the Access Point | ||||
| SapNotificationDot11AuthenticatorMacAddr | 1.3.6.1.4.1.52.4.13.100.1.6 | MacAddress | RO | |
scalar · MacAddress · read-only · current This attribute holds the MAC address of the authenticator for the AP. | ||||
| NapNotificationTrapObjects | 1.3.6.1.4.1.52.4.13.100.2 | |||
| !sysSystemUp | 1.3.6.1.4.1.52.4.13.100.2.1 | |||
notification · current The system up notification shall be sent when the AP is fully up and running. | ||||
| !sysSystemDown | 1.3.6.1.4.1.52.4.13.100.2.2 | |||
notification · current The system down notification shall be sent before the AP is about to reboot. | ||||
| !sysRadiusServerChanged | 1.3.6.1.4.1.52.4.13.100.2.3 | |||
notification · current The RADIUS server changed notification shall be sent when the RADIUS server has changed from Primary / Secondary to Secondary / Primary. | ||||
| !dot11StationAssociation | 1.3.6.1.4.1.52.4.13.100.2.4 | |||
notification · current The associate notification shall be sent when a station successfully associates with the Access Point. The value of the notification shall include the MAC address of the station that has associated.
| ||||
| !dot11StationReAssociation | 1.3.6.1.4.1.52.4.13.100.2.5 | |||
notification · current The re-associate notification shall be sent when a station successfully re-associates with the Access Point. The value of the notification shall include the MAC address of the station that has associated.
| ||||
| !dot11StationAuthentication | 1.3.6.1.4.1.52.4.13.100.2.6 | |||
notification · current The authentication notification shall be sent when a station successfully authenticates with the Access Point. The value of the notification shall include the MAC address of the station that has authenticated.
| ||||
| !dot11StationRequestFail | 1.3.6.1.4.1.52.4.13.100.2.7 | |||
notification · current The station request fail shall be sent out when a station fails to associate / re-associate / authenticate with the Access Point. The notification shall include the MAC address of the station and the reason code for the failure. | ||||
| !dot1xMacAddrAuthSuccess | 1.3.6.1.4.1.52.4.13.100.2.9 | |||
notification · current The 802.1X MAC address authentication success notification shall be sent when a station successfully authenticates the MAC address with the RADIUS server. The value of the notification shall include the MAC address of the station that has authenticated.
| ||||
| !dot1xMacAddrAuthFail | 1.3.6.1.4.1.52.4.13.100.2.10 | |||
notification · current The 802.1X MAC address authentication failure notification shall be sent when a station fails to authenticate the MAC address with the RADIUS server. The value of the notification shall include the MAC address of the station that failed to authenticate.
| ||||
| !dot1xAuthNotInitiated | 1.3.6.1.4.1.52.4.13.100.2.11 | |||
notification · current The 802.1X authentication not initiated notification shall be sent when a station did not initiate 802.1X authentication with the RADIUS server. The value of the notification shall include the MAC address of the station that did not initiate 802.1X authentication.
| ||||
| !dot1xAuthSuccess | 1.3.6.1.4.1.52.4.13.100.2.12 | |||
notification · current The 802.1X authentication success notification shall be sent when a station successfully authenticates with the RADIUS server. The value of the notification shall include the MAC address of the station that has authenticated.
| ||||
| !dot1xAuthFail | 1.3.6.1.4.1.52.4.13.100.2.13 | |||
notification · current The 802.1X authentication failure notification shall be sent when a station fails to authenticate with the RADIUS server. The value of the notification shall include the MAC address of the station that failed to authenticate.
| ||||
| !localMacAddrAuthSuccess | 1.3.6.1.4.1.52.4.13.100.2.14 | |||
notification · current The Local MAC address authentication success notification shall be sent when a station successfully authenticates the MAC address with the database stored locally within the AP. The value of the notification shall include the MAC address of the station that has authenticated.
| ||||
| !localMacAddrAuthFail | 1.3.6.1.4.1.52.4.13.100.2.15 | |||
notification · current The Local MAC address authentication failure notification shall be sent when a station fails to authenticate the MAC address with the database stored locally within the AP. The value of the notification shall include the MAC address of the station that has authenticated.
| ||||
| !pppLogonFail | 1.3.6.1.4.1.52.4.13.100.2.16 | |||
notification · current The PPP Logon failure notification shall be sent out when the AP fails to login successfully to the PPP peer using the supplied username and password. | ||||
| !iappStationRoamedFrom | 1.3.6.1.4.1.52.4.13.100.2.17 | |||
notification · current The IAPP Station Roamed-From Notification shall be sent out whenever a station roams from another Access Point (AP) to this AP. The notification shall include the MAC address of the station and the IP address of the old AP. | ||||
| !iappStationRoamedTo | 1.3.6.1.4.1.52.4.13.100.2.18 | |||
notification · current The IAPP Station Roamed-To Notification shall be sent out whenever a station roams to another Access Point (AP) from this AP. The notification shall include the MAC address of the station and the IP address of the new AP. | ||||
| !iappContextDataSent | 1.3.6.1.4.1.52.4.13.100.2.19 | |||
notification · current The IAPP Context Data Sent notification shall be sent out whenever the context data for a station has been sent to the new AP with which the station has associated. The notification shall include the MAC address of the station and the IP address of the new AP. | ||||
| !sntpServerFail | 1.3.6.1.4.1.52.4.13.100.2.20 | |||
notification · current The sntpServerFail notification shall be sent when the AP fails to get time from the configured SNTP server. | ||||
| !dot11InterfaceAFail | 1.3.6.1.4.1.52.4.13.100.2.21 | |||
notification · current The InterfaceAFail notification shall be sent out when 802.11a wireless interface has failed. | ||||
| !dot11InterfaceGFail | 1.3.6.1.4.1.52.4.13.100.2.22 | |||
notification · current The InterfaceGFail notification shall be sent out when 802.11g wireless interface has failed. | ||||
| !dot11WirelessSTPDetection | 1.3.6.1.4.1.52.4.13.100.2.23 | |||
notification · current The WirelessSTPDetection notification shall be sent out when wireless STP packet has detected. | ||||
Traps / Notifications
- dot11InterfaceAFail
1.3.6.1.4.1.52.4.13.100.2.21 - dot11InterfaceGFail
1.3.6.1.4.1.52.4.13.100.2.22 - dot11StationAssociation
1.3.6.1.4.1.52.4.13.100.2.4 - dot11StationAuthentication
1.3.6.1.4.1.52.4.13.100.2.6 - dot11StationReAssociation
1.3.6.1.4.1.52.4.13.100.2.5 - dot11StationRequestFail
1.3.6.1.4.1.52.4.13.100.2.7 - dot11WirelessSTPDetection
1.3.6.1.4.1.52.4.13.100.2.23 - dot1xAuthFail
1.3.6.1.4.1.52.4.13.100.2.13 - dot1xAuthNotInitiated
1.3.6.1.4.1.52.4.13.100.2.11 - dot1xAuthSuccess
1.3.6.1.4.1.52.4.13.100.2.12 - dot1xMacAddrAuthFail
1.3.6.1.4.1.52.4.13.100.2.10 - dot1xMacAddrAuthSuccess
1.3.6.1.4.1.52.4.13.100.2.9 - iappContextDataSent
1.3.6.1.4.1.52.4.13.100.2.19 - iappStationRoamedFrom
1.3.6.1.4.1.52.4.13.100.2.17 - iappStationRoamedTo
1.3.6.1.4.1.52.4.13.100.2.18 - localMacAddrAuthFail
1.3.6.1.4.1.52.4.13.100.2.15 - localMacAddrAuthSuccess
1.3.6.1.4.1.52.4.13.100.2.14 - pppLogonFail
1.3.6.1.4.1.52.4.13.100.2.16 - sntpServerFail
1.3.6.1.4.1.52.4.13.100.2.20 - sysRadiusServerChanged
1.3.6.1.4.1.52.4.13.100.2.3 - sysSystemDown
1.3.6.1.4.1.52.4.13.100.2.2 - sysSystemUp
1.3.6.1.4.1.52.4.13.100.2.1