CTFRAMER-CONFIG-MIB
Enterasys Networks Inc.snmptranslate -m CTFRAMER-CONFIG-MIB -Tpsnmpwalk -v2c -c <community> -m CTFRAMER-CONFIG-MIB <host> 1.3.6.1.4.1.52.4.3.3.9.1Imports
| CTIF-EXT-MIB | ctFramerConfig, ctIfPortPortNumber |
|---|---|
| IF-MIB | ifIndex |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
| SNMPv2-SMI | Bits, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso |
| SNMPv2-TC | DisplayString, PhysAddress, TEXTUAL-CONVENTION |
OID tree
| Name | OID | Type | Access | Status |
|---|---|---|---|---|
| NctFramerBaseConfig | 1.3.6.1.4.1.52.4.3.3.9.1 | |||
| TctFramerConfigTable | 1.3.6.1.4.1.52.4.3.3.9.1.1 | NA | mandatory | |
table · not-accessible · mandatory A list of framer configuration objects for a physical port on a particular interface. | ||||
| RctFramerConfigEntry | 1.3.6.1.4.1.52.4.3.3.9.1.1.1 | NA | mandatory | |
row · not-accessible · mandatory An entry containing objects pertaining to the configuration of the framer on a physical port on an interface.
| ||||
| CctFramerStatsConfig | 1.3.6.1.4.1.52.4.3.3.9.1.1.1.1 | INTEGER | RW | mandatory |
column · INTEGER · read-write · mandatory Setting this object to 'on' will activate the framer MIBs as specified by either RFC-1595 or RFC-1407 depending on whether the interface uses SONET/SDH framing or DS3 framing respectively. Note: Setting this to 'on' will permit gathering of framer statistics at the expense of processing time. However, it might be a valuable debugging aid to turn on the framer MIB. Setting this object to 'off' will deactivate the respective framer MIBs, thus saving processing time. It is emphasized that collection of statistics for the framer is resource (processor, memory) intensive. This object is persistent.
| ||||
| CctFramerAlarmsConfig | 1.3.6.1.4.1.52.4.3.3.9.1.1.1.2 | INTEGER | RW | mandatory |
column · INTEGER · read-write · mandatory This object activates/deactivates the detection and initiation
of framer alarms.
for SONET/SDH framed physical ports:
RDI - remote defect indicator
AIS - alarm indication signal
for DS3 framed physical ports:
yellow signal alarms
This object is persistent.
| ||||
| CctFramerMediumConfig | 1.3.6.1.4.1.52.4.3.3.9.1.1.1.3 | INTEGER | RW | mandatory |
column · INTEGER · read-write · mandatory This object controls whether a SONET or a SDH signal is used across this physical port. sonet - synchronous optical network sdh - synchronous digital heirarchy This object is persistent.
| ||||
| CctFramerIdleCellsConfig | 1.3.6.1.4.1.52.4.3.3.9.1.1.1.4 | INTEGER | RW | mandatory |
column · INTEGER · read-write · mandatory When this object is set to idle, null cells will have the CLP bit set. When this object is set to unassigned, null cells will not have the CLP bit set. This object is persistent.
| ||||
| CctFramerCellPayScramConfig | 1.3.6.1.4.1.52.4.3.3.9.1.1.1.5 | INTEGER | RW | mandatory |
column · INTEGER · read-write · mandatory This object activates/deactivates cell payload transmit scrambling and receive descrambling. This object is persistent.
| ||||
| NctFramerSonetConfig | 1.3.6.1.4.1.52.4.3.3.9.2 | |||
| NctFramerDS3Config | 1.3.6.1.4.1.52.4.3.3.9.3 | |||