CT-CMMPHYS-MIB
Enterasys Networks Inc.snmptranslate -m CT-CMMPHYS-MIB -Tpsnmpwalk -v2c -c <community> -m CT-CMMPHYS-MIB <host> 1.3.6.1.4.1.52.4.1.1.18.1Imports
| CT-HSIMPHYS-MIB | mBusBoardID |
|---|---|
| CTRON-MIB-NAMES | ctCMM |
| IF-MIB | ifIndex |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
| SNMPv2-SMI | Bits, Counter32, Gauge32, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso |
| SNMPv2-TC | DisplayString, PhysAddress, TEXTUAL-CONVENTION |
OID tree
| Name | OID | Type | Access | Status |
|---|---|---|---|---|
| NcmmModemInfo | 1.3.6.1.4.1.52.4.1.1.18.1 | |||
| TcmmBoardTable | 1.3.6.1.4.1.52.4.1.1.18.1.1 | NA | mandatory | |
table · not-accessible · mandatory A list of CMM boards present in this unit. | ||||
| RcmmBoardEntry | 1.3.6.1.4.1.52.4.1.1.18.1.1.1 | NA | mandatory | |
| CcmmBoardType | 1.3.6.1.4.1.52.4.1.1.18.1.1.1.1 | OBJECT IDENTIFIER | RO | mandatory |
column · OBJECT IDENTIFIER · read-only · mandatory The value of this object uniquely defines the CMM board type - a vendor's authoritative identification for a module. By convention, this value is allocated within the SMI enterprises subtree(1.3.6.1.4.1), and provides an easy and unambiguous means for determining the type of board. | ||||
| CcmmNumModules | 1.3.6.1.4.1.52.4.1.1.18.1.1.1.2 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The value of this object is the number of CMM modules contained on this physical CMM circuit board. | ||||
| CcmmModuleNumModems | 1.3.6.1.4.1.52.4.1.1.18.1.1.1.3 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory Number of modems per CMM module. | ||||
| CcmmTFTPServer | 1.3.6.1.4.1.52.4.1.1.18.1.1.1.4 | IpAddress | RW | mandatory |
column · IpAddress · read-write · mandatory The value of this object is the IP address of the TFTP server where the object code for CMM modules resides. This object is persistent. | ||||
| CcmmUpgradePath | 1.3.6.1.4.1.52.4.1.1.18.1.1.1.5 | DisplayString | RW | mandatory |
column · DisplayString · read-write · mandatory The value of this object is the path to the object code for CMM modules on the TFTP server. This object is persistent. | ||||
| CcmmUpgradeFlag | 1.3.6.1.4.1.52.4.1.1.18.1.1.1.6 | INTEGER | RW | mandatory |
column · INTEGER · read-write · mandatory The value of this object is a flag that indicates whether or not to upgrade the software for the CMM modules on the board. This object is persistent.
| ||||
| CcmmCommitFlag | 1.3.6.1.4.1.52.4.1.1.18.1.1.1.7 | INTEGER | RW | mandatory |
column · INTEGER · read-write · mandatory The value of this object is a flag that indicates whether or not to commit the software for the CMM modules on the board. This object is persistent.
| ||||
| CcmmModemResetLimit | 1.3.6.1.4.1.52.4.1.1.18.1.1.1.8 | INTEGER | RW | mandatory |
column · INTEGER · read-write · mandatory The value of this object is the number of times that a modem can be reset within a given time span before it is declared to be faulty. If the value is 0 then the modem will never be declared faulty. This object is persistent. | ||||
| CcmmModemResetTime | 1.3.6.1.4.1.52.4.1.1.18.1.1.1.9 | INTEGER | RW | mandatory |
column · INTEGER · read-write · mandatory The value of this object is the time span (in minutes) during which the given number of resets must occur before the modem is declared to be faulty. This object is persistent. | ||||
| CcmmOutgoingInactivityTimeout | 1.3.6.1.4.1.52.4.1.1.18.1.1.1.10 | INTEGER | RW | mandatory |
column · INTEGER · read-write · mandatory The value of this object is the duration (in seconds) of a period of inactivity before an outgoing call is terminated. This object is persistent. | ||||
| CcmmIncomingInactivityTimeout | 1.3.6.1.4.1.52.4.1.1.18.1.1.1.11 | INTEGER | RW | mandatory |
column · INTEGER · read-write · mandatory The value of this object is the duration (in seconds) of a period of inactivity before an incoming call is terminated. This object is persistent. | ||||
| CcmmAsyncBaseOrigATCmdStr | 1.3.6.1.4.1.52.4.1.1.18.1.1.1.12 | DisplayString | RO | mandatory |
column · DisplayString · read-only · mandatory The value of this object is the default or base set of AT commands to be used when originating an async call. | ||||
| CcmmAsyncBaseAnswerATCmdStr | 1.3.6.1.4.1.52.4.1.1.18.1.1.1.13 | DisplayString | RO | mandatory |
column · DisplayString · read-only · mandatory The value of this object is the default or base set of AT commands to be used when answering an async call. | ||||
| CcmmAsyncOrigStrModifier | 1.3.6.1.4.1.52.4.1.1.18.1.1.1.14 | DisplayString | RW | mandatory |
column · DisplayString · read-write · mandatory The value of this object is a set of additional AT commands to be used when originating an async call. This object is persistent. | ||||
| CcmmAsyncAnswerStrModifier | 1.3.6.1.4.1.52.4.1.1.18.1.1.1.15 | DisplayString | RW | mandatory |
column · DisplayString · read-write · mandatory The value of this object is a set of additional AT commands to be used when answering an async call. This object is persistent. | ||||
| CcmmAsyncOperOrigATCmdStr | 1.3.6.1.4.1.52.4.1.1.18.1.1.1.16 | DisplayString | RO | mandatory |
column · DisplayString · read-only · mandatory The value of this object is the operative set of AT commands to be used when originating an async call. It includes the base string, the modifier string, and the call timeout value. | ||||
| CcmmAsyncOperAnswerATCmdStr | 1.3.6.1.4.1.52.4.1.1.18.1.1.1.17 | DisplayString | RO | mandatory |
column · DisplayString · read-only · mandatory The value of this object is the operative set of AT commands to be used when answering an async call. It includes the base string, the modifier string, and the call timeout value. | ||||
| CcmmHdlcBaseOrigATCmdStr | 1.3.6.1.4.1.52.4.1.1.18.1.1.1.18 | DisplayString | RO | mandatory |
column · DisplayString · read-only · mandatory The value of this object is the default or base set of AT commands to be used when originating an HDLC call. | ||||
| CcmmHdlcBaseAnswerATCmdStr | 1.3.6.1.4.1.52.4.1.1.18.1.1.1.19 | DisplayString | RO | mandatory |
column · DisplayString · read-only · mandatory The value of this object is the default or base set of AT commands to be used when answering an HDLC call. | ||||
| CcmmHdlcOrigStrModifier | 1.3.6.1.4.1.52.4.1.1.18.1.1.1.20 | DisplayString | RW | mandatory |
column · DisplayString · read-write · mandatory The value of this object is a set of additional AT commands to be used when originating an HDLC call. This object is persistent. | ||||
| CcmmHdlcAnswerStrModifier | 1.3.6.1.4.1.52.4.1.1.18.1.1.1.21 | DisplayString | RW | mandatory |
column · DisplayString · read-write · mandatory The value of this object is a set of additional AT commands to be used when answering an HDLC call. This object is persistent. | ||||
| CcmmHdlcOperOrigATCmdStr | 1.3.6.1.4.1.52.4.1.1.18.1.1.1.22 | DisplayString | RO | mandatory |
column · DisplayString · read-only · mandatory The value of this object is the operative set of AT commands to be used when originating an HDLC call. It includes the base string, the modifier string, and the call timeout value. | ||||
| CcmmHdlcOperAnswerATCmdStr | 1.3.6.1.4.1.52.4.1.1.18.1.1.1.23 | DisplayString | RO | mandatory |
column · DisplayString · read-only · mandatory The value of this object is the operative set of AT commands to be used when answering an HDLC call. It includes the base string, the modifier string, and the call timeout value. | ||||
| CcmmBoardAdminStatus | 1.3.6.1.4.1.52.4.1.1.18.1.1.1.24 | INTEGER | RW | mandatory |
column · INTEGER · read-write · mandatory The value of this object is the administrative status
of the CMM board.
down(1) -- all modems that belong to this board are to be
removed from service immediately
leave-service(2) -- each modem that belongs to this board is
to be removed from service at the completion
of its current call, if any
up(3) -- each modem that belongs to this module is to become
available for accepting calls
upgrade(4) -- all modules that belong to this board are to be
reloaded with new software and restarted
| ||||
| CcmmBoardOperStatus | 1.3.6.1.4.1.52.4.1.1.18.1.1.1.25 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The value of this object is the operational status of
the CMM board.
initializing(1) -- all modules that belong to this board are booting
up or in the process of a software upgrade
active(2) -- all modules that belong to this board are available
for accepting calls
leaving-service(3) -- all modules that belong to this board are
functional but are no longer available for
accepting calls (Existing calls are allowed
to terminate normally.)
out-of-service(4) -- none of the modules that belong to this board
are available for accepting calls nor do they
have any existing calls
faulty(5) -- all modules that belong to this board are unusable
impaired(6) -- the board is otherwise active but one or more
modules are in the out-of-service, initializing,
testing, faulty, or impaired states
| ||||
| TcmmModuleTable | 1.3.6.1.4.1.52.4.1.1.18.1.2 | NA | mandatory | |
table · not-accessible · mandatory A list of CMM modules present on each CMM board in this unit | ||||
| RcmmModuleEntry | 1.3.6.1.4.1.52.4.1.1.18.1.2.1 | NA | mandatory | |
row · not-accessible · mandatory The value of this object is a CMM module that is present in this unit
| ||||
| CcmmModuleID | 1.3.6.1.4.1.52.4.1.1.18.1.2.1.1 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The value of this object is an index that uniquely identifies the CMM module within the physical CMM board. | ||||
| CcmmDpramSize | 1.3.6.1.4.1.52.4.1.1.18.1.2.1.2 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory Size of the DPRAM (in bytes) on the CMM module. | ||||
| CcmmSdramSize | 1.3.6.1.4.1.52.4.1.1.18.1.2.1.3 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory Size of the SDRAM (in bytes) on the CMM module. | ||||
| CcmmCpuType | 1.3.6.1.4.1.52.4.1.1.18.1.2.1.4 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory CPU type on the CMM module.
| ||||
| CcmmCpuSpeed | 1.3.6.1.4.1.52.4.1.1.18.1.2.1.5 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The speed of the CPU (in Megahertz) on the CMM module. | ||||
| CcmmCpuFwRev | 1.3.6.1.4.1.52.4.1.1.18.1.2.1.6 | DisplayString | RO | mandatory |
column · DisplayString · read-only · mandatory Revision of the CPU firmware on the CMM module. This code is a product of RSA. | ||||
| CcmmEpldId | 1.3.6.1.4.1.52.4.1.1.18.1.2.1.7 | DisplayString | RO | mandatory |
column · DisplayString · read-only · mandatory EPLD ID on the CMM module. (Read from the Altera chip.) | ||||
| CcmmEpldRev | 1.3.6.1.4.1.52.4.1.1.18.1.2.1.8 | DisplayString | RO | mandatory |
column · DisplayString · read-only · mandatory Revision of the EPLD firmware on the CMM module. This code is produced by Cabletron. | ||||
| CcmmNumBadModems | 1.3.6.1.4.1.52.4.1.1.18.1.2.1.9 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The value of this object is the number of bad modems on the CMM module. | ||||
| CcmmModuleAdminStatus | 1.3.6.1.4.1.52.4.1.1.18.1.2.1.10 | INTEGER | RW | mandatory |
column · INTEGER · read-write · mandatory The value of this object is the administrative status
of the CMM module.
down(1) -- all modems that belong to this module are to be
removed from service immediately
leave-service(2) -- each modem that belongs to this module is
to be removed from service at the completion
of its current call, if any
up(3) -- each modem that belongs to this module is to become
available for accepting calls
run-diagnostics(4) -- all modems that belong to this module are
to run a series of comprehensive on-line
diagnostic tests
reset(5) -- the entire module is to be physically reset
faulty(6) -- the entire module is to be immediately removed from
service and considered unusable
| ||||
| CcmmModuleOperStatus | 1.3.6.1.4.1.52.4.1.1.18.1.2.1.11 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The value of this object is the operational status of
the CMM module.
initializing(1) -- the module is booting up or in the process of
a software upgrade
active(2) -- all modems that belong to this module are available
for accepting calls
leaving-service(3) -- all modems that belong to this module are
functional but are no longer available for
accepting calls (Existing calls are allowed
to terminate normally.)
out-of-service(4) -- none of the modems that belong to this module
are available for accepting calls nor do they
have any existing calls
faulty(5) -- the module has been removed from service by an NMS and
is considered to be unusable
impaired(6) -- the module is otherwise active but one or more
modems are in the out-of-service, initializing,
testing, or faulty states
| ||||
| TcmmModemTable | 1.3.6.1.4.1.52.4.1.1.18.1.3 | NA | mandatory | |
table · not-accessible · mandatory A list of modems present on each CMM module on each CMM board in this unit | ||||
| RcmmModemEntry | 1.3.6.1.4.1.52.4.1.1.18.1.3.1 | NA | mandatory | |
| CcmmBoardID | 1.3.6.1.4.1.52.4.1.1.18.1.3.1.1 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory This object contains the logical number of the CMM board to which the modem belongs. | ||||
| CcmmModemID | 1.3.6.1.4.1.52.4.1.1.18.1.3.1.2 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory This object contains the logical number of the modem on the CMM module to which the modem belongs. | ||||
| CcmmIFNum | 1.3.6.1.4.1.52.4.1.1.18.1.3.1.3 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory This object contains the number of the instance of the Interface MIB that is associated with this modem. | ||||
| CcmmSessionNum | 1.3.6.1.4.1.52.4.1.1.18.1.3.1.4 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory This object contains the session number that is associated with this modem. Session numbers are assigned, starting with 1, from the first modem on the first module of the first CMM board and continuing through the last modem of the last module of the last CMM board. | ||||
| CcmmDdpPartNum | 1.3.6.1.4.1.52.4.1.1.18.1.3.1.5 | DisplayString | RO | mandatory |
column · DisplayString · read-only · mandatory Part number of the DDP controller on the CMM module. (Read from the DDP chip.) | ||||
| CcmmDdpRevLevel | 1.3.6.1.4.1.52.4.1.1.18.1.3.1.6 | DisplayString | RO | mandatory |
column · DisplayString · read-only · mandatory Revision level of the DDP controller on the CMM module. (Read from the DDP chip.) | ||||
| CcmmDdpFwRev | 1.3.6.1.4.1.52.4.1.1.18.1.3.1.7 | DisplayString | RO | mandatory |
column · DisplayString · read-only · mandatory Revison of the DDP controller firmware on the CMM module. This code is produced by Rockwell. | ||||
| CcmmDDPInterrupts | 1.3.6.1.4.1.52.4.1.1.18.1.3.1.8 | Counter | RO | mandatory |
column · Counter · read-only · mandatory This object contains the number of interrupts received by the CMM transfer manager since initialization. | ||||
| CcmmRxFlowCtlEvts | 1.3.6.1.4.1.52.4.1.1.18.1.3.1.9 | Counter | RW | mandatory |
column · Counter · read-write · mandatory This object contains the number of received flow control events. | ||||
| CcmmTxFlowCtlEvts | 1.3.6.1.4.1.52.4.1.1.18.1.3.1.10 | Counter | RW | mandatory |
column · Counter · read-write · mandatory This object contains the number of transmitted flow control events. | ||||
| CcmmCallStatus | 1.3.6.1.4.1.52.4.1.1.18.1.3.1.11 | INTEGER | RW | mandatory |
column · INTEGER · read-write · mandatory This object contains the current call status.
| ||||
| CcmmCallOrigin | 1.3.6.1.4.1.52.4.1.1.18.1.3.1.12 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory This object contains an enumerated value that indicates whether the call originated locally or remotely.
| ||||
| CcmmRobbedBitDetected | 1.3.6.1.4.1.52.4.1.1.18.1.3.1.13 | DisplayString | RO | mandatory |
column · DisplayString · read-only · mandatory This object contains the robbed bit signalling pattern that was detected by the modem or 0 if none. | ||||
| CcmmCorrectionType | 1.3.6.1.4.1.52.4.1.1.18.1.3.1.14 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory This object contains an enumerated value that indicates the type of error correction that was negotiated.
| ||||
| CcmmCompressionType | 1.3.6.1.4.1.52.4.1.1.18.1.3.1.15 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory This object contains an enumerated value that indicates the type of data compression that was negotiated.
| ||||
| CcmmRxRate | 1.3.6.1.4.1.52.4.1.1.18.1.3.1.16 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory This object contains the current receive rate. | ||||
| CcmmTxRate | 1.3.6.1.4.1.52.4.1.1.18.1.3.1.17 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory This object contains the current transmit rate. | ||||
| CcmmEncoding | 1.3.6.1.4.1.52.4.1.1.18.1.3.1.18 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory This object contains the current PCM encoding type.
| ||||
| CcmmFraming | 1.3.6.1.4.1.52.4.1.1.18.1.3.1.19 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory This object contains the current framing type.
| ||||
| CcmmInitialConnectRate | 1.3.6.1.4.1.52.4.1.1.18.1.3.1.20 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory This object contains the initial connect rate (in BPS) or the session. | ||||
| CcmmMaxHostWindows | 1.3.6.1.4.1.52.4.1.1.18.1.3.1.21 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory This object contains the maximum number of host windows. | ||||
| CcmmMaxCmmWindows | 1.3.6.1.4.1.52.4.1.1.18.1.3.1.22 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory This object contains the maximum number of CMM windows. | ||||
| CcmmNumOutHostAcks | 1.3.6.1.4.1.52.4.1.1.18.1.3.1.23 | Gauge | RO | mandatory |
column · Gauge · read-only · mandatory This object contains the number of host window acks that have not been processed by the CMM side. | ||||
| CcmmNumOutCmmAcks | 1.3.6.1.4.1.52.4.1.1.18.1.3.1.24 | Gauge | RO | mandatory |
column · Gauge · read-only · mandatory This object contains the number of CMM window acks that have not been processed by the host side. | ||||
| CcmmToNetworkOctets | 1.3.6.1.4.1.52.4.1.1.18.1.3.1.25 | Counter | RO | mandatory |
column · Counter · read-only · mandatory This object contains the number of data bytes transmitted (modem -> central office switch). | ||||
| CcmmFromNetworkOctets | 1.3.6.1.4.1.52.4.1.1.18.1.3.1.26 | Counter | RO | mandatory |
column · Counter · read-only · mandatory This object contains the number of data bytes received (central office switch -> modem). | ||||
| CcmmToHostOctets | 1.3.6.1.4.1.52.4.1.1.18.1.3.1.27 | Counter | RO | mandatory |
column · Counter · read-only · mandatory This object contains the number of data bytes transmitted (modem -> m-bus host). | ||||
| CcmmFromHostOctets | 1.3.6.1.4.1.52.4.1.1.18.1.3.1.28 | Counter | RO | mandatory |
column · Counter · read-only · mandatory This object contains the number of data bytes received (m-bus host -> modem). | ||||
| CcmmToNetworkFrames | 1.3.6.1.4.1.52.4.1.1.18.1.3.1.29 | Counter | RO | mandatory |
column · Counter · read-only · mandatory This object contains the number of frames transmitted (modem -> central office switch). | ||||
| CcmmFromNetworkFrames | 1.3.6.1.4.1.52.4.1.1.18.1.3.1.30 | Counter | RO | mandatory |
column · Counter · read-only · mandatory This object contains the number of frames received (central office switch -> modem). | ||||
| CcmmOversizeFrames | 1.3.6.1.4.1.52.4.1.1.18.1.3.1.31 | Counter | RO | mandatory |
column · Counter · read-only · mandatory This object contains the number of HDLC frames received that were greater than the maximum permissible size. | ||||
| CcmmOverrunErrors | 1.3.6.1.4.1.52.4.1.1.18.1.3.1.32 | Counter | RO | mandatory |
column · Counter · read-only · mandatory This object contains the number of HDLC overrun errors. | ||||
| CcmmCRCErrors | 1.3.6.1.4.1.52.4.1.1.18.1.3.1.33 | Counter | RO | mandatory |
column · Counter · read-only · mandatory This object contains the number of HDLC CRC errors. | ||||
| CcmmAbortedFrames | 1.3.6.1.4.1.52.4.1.1.18.1.3.1.34 | Counter | RO | mandatory |
column · Counter · read-only · mandatory This object contains the number of HDLC frames that were aborted while they were being received. | ||||
| CcmmRetrainEvents | 1.3.6.1.4.1.52.4.1.1.18.1.3.1.35 | Counter | RO | mandatory |
column · Counter · read-only · mandatory This object contains the number of times that retrain and renegotiation events have occurred since initialization. | ||||
| CcmmARAEvents | 1.3.6.1.4.1.52.4.1.1.18.1.3.1.36 | Counter | RO | mandatory |
column · Counter · read-only · mandatory This object contains the number of times that automatic rate adaption events have occurred. | ||||
| CcmmARAFlag | 1.3.6.1.4.1.52.4.1.1.18.1.3.1.37 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory This object contains a flag that indicates whether or not an ARA event has occurred during the current session.
| ||||
| CcmmCarrierLossEvents | 1.3.6.1.4.1.52.4.1.1.18.1.3.1.38 | Counter | RO | mandatory |
column · Counter · read-only · mandatory This object contains the number of times that carrier loss events have occurred. | ||||
| CcmmCarrierLossFlag | 1.3.6.1.4.1.52.4.1.1.18.1.3.1.39 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory This object contains a flag that indicates whether or not a carrier loss event has occurred during the current session.
| ||||
| CcmmRcvSignalLevel | 1.3.6.1.4.1.52.4.1.1.18.1.3.1.40 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory This object contains the receive signal level. | ||||
| CcmmRcvSignalEQM | 1.3.6.1.4.1.52.4.1.1.18.1.3.1.41 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory This object contains the receive signal EQM. | ||||
| CcmmTDMSlot | 1.3.6.1.4.1.52.4.1.1.18.1.3.1.42 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory This object contains the number of the TDM slot used by this session. | ||||
| CcmmResetModemStats | 1.3.6.1.4.1.52.4.1.1.18.1.3.1.43 | INTEGER | RW | mandatory |
column · INTEGER · read-write · mandatory This object is used to reset the statistics pertaining to the selected modem. If written with the value 'true', the statistics will be reset. If written with the value 'false', no action will be taken. Its value will always be read as 'false'.
| ||||
| CcmmModemAdminStatus | 1.3.6.1.4.1.52.4.1.1.18.1.3.1.44 | INTEGER | RW | mandatory |
column · INTEGER · read-write · mandatory This object contains the administrative status of a modem.
down(1) -- the modem is to be removed from service immediately
leave-service(2) -- the modem is to be removed from service at
the completion of its current call, if any
up(3) -- the modem is to become available for accepting calls
run-diagnostics(4) -- the modem is to run a series of
comprehensive on-line diagnostic tests
reset(5) -- the modem is to be physically reset
faulty(6) -- the modem is to be immediately removed from
service and considered unusable
| ||||
| CcmmModemOperStatus | 1.3.6.1.4.1.52.4.1.1.18.1.3.1.45 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory This object contains the operational status of a modem.
initializing(1) -- the module to which the modem belongs is booting
up or in the process of a software upgrade
idle(2) -- the modem is available for accepting calls but has no
call in place
active(3) -- the modem is not available for accepting calls because
it already has one in place
leaving-service(4) -- the modem is functional but is no longer
available for accepting calls (Existing calls
are allowed to terminate normally.)
out-of-service(5) -- the modem is neither available for accepting
calls nor does it have a call in place
testing(6) -- the modem is running a series of comprehensive on-line
diagnostic tests
faulty(7) -- the modem has been removed from service by an NMS or
due to a hardware or software failure and is considered
to be unusable
resetting(8) -- the modem is executing a reset sequence
| ||||
| NcmmFreeFormAtCmdGroup | 1.3.6.1.4.1.52.4.1.1.18.1.5 | |||
| ScmmATCommand | 1.3.6.1.4.1.52.4.1.1.18.1.5.1 | OCTET STRING | RW | mandatory |
scalar · OCTET STRING · read-write · mandatory This object contains the user-defined AT command string. It can contain up to 256 characters, including a carriage return that will automatically be inserted and a NULL terminator. | ||||
| ScmmSelectedModem | 1.3.6.1.4.1.52.4.1.1.18.1.5.2 | INTEGER | RW | mandatory |
scalar · INTEGER · read-write · mandatory This object contains the ID of the modem to which the free-form AT command string should be sent. | ||||
| ScmmATCmdStatus | 1.3.6.1.4.1.52.4.1.1.18.1.5.3 | INTEGER | RW | mandatory |
scalar · INTEGER · read-write · mandatory This object allows the free-form AT command string to be sent and allows the status of the command string to be examined.
| ||||
| ScmmATCmdResult | 1.3.6.1.4.1.52.4.1.1.18.1.5.4 | DisplayString (SIZE (0..255)) | RO | mandatory |
scalar · DisplayString (SIZE (0..255)) · read-only · mandatory This object contains the result string from issuing the free-form AT command . | ||||