EES-POWER-MIB
Vertiv (formerly 'Emerson Energy Systems')Emerson Energy Systems (EES) Power MIB, revision D.
snmptranslate -m EES-POWER-MIB -Tpsnmpwalk -v2c -c <community> -m EES-POWER-MIB <host> 1.3.6.1.4.1.6302.2.1Imports
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
|---|---|
| SNMPv2-SMI | Bits, Counter32, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, enterprises, iso |
| SNMPv2-TC | DateAndTime, DisplayString, PhysAddress, TEXTUAL-CONVENTION |
OID tree
| Name | OID | Type | Access | Status | Example | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Nees | 1.3.6.1.4.1.6302 | ||||||||||||||||||||
| Nglobal | 1.3.6.1.4.1.6302.2 | ||||||||||||||||||||
| IpowerMIB | 1.3.6.1.4.1.6302.2.1 | ||||||||||||||||||||
identity Emerson Energy Systems (EES) Power MIB, revision D. | |||||||||||||||||||||
| Nident | 1.3.6.1.4.1.6302.2.1.1 | ||||||||||||||||||||
| SidentManufacturer | 1.3.6.1.4.1.6302.2.1.1.1 | DisplayString | RO | Vertiv Tech Co.,Ltd. | |||||||||||||||||
scalar · DisplayString · read-only · current The name of the equipment manufacturer. Example values from LibreNMS test devices
| |||||||||||||||||||||
| SidentModel | 1.3.6.1.4.1.6302.2.1.1.2 | DisplayString | RO | NCU | |||||||||||||||||
scalar · DisplayString · read-only · current The manufacturers model designation of the power system. Example values from LibreNMS test devices
| |||||||||||||||||||||
| SidentControllerFirmwareVersion | 1.3.6.1.4.1.6302.2.1.1.3 | DisplayString | RO | 2.2.12 | |||||||||||||||||
scalar · DisplayString · read-only · current The firmware (software) version of the controller. Example values from LibreNMS test devices
| |||||||||||||||||||||
| SidentName | 1.3.6.1.4.1.6302.2.1.1.4 | DisplayString | RW | SITE | |||||||||||||||||
scalar · DisplayString · read-write · current The name of the power plant. This object should be set by the administrator. Example values from LibreNMS test devices
| |||||||||||||||||||||
| SidentSNMPCfgVer | 1.3.6.1.4.1.6302.2.1.1.5 | DisplayString | RO | ||||||||||||||||||
scalar · DisplayString · read-only · current The snmp cfg version | |||||||||||||||||||||
| SidentControllerSerialNumber | 1.3.6.1.4.1.6302.2.1.1.6 | DisplayString | RO | 03200913942 | |||||||||||||||||
scalar · DisplayString · read-only · current The serial number of this controller Example values from LibreNMS test devices
| |||||||||||||||||||||
| Nsystem | 1.3.6.1.4.1.6302.2.1.2 | ||||||||||||||||||||
| SsystemStatus | 1.3.6.1.4.1.6302.2.1.2.1 | Status | RO | 2 | |||||||||||||||||
scalar · Status · read-only · current Status of the complete plant (highest alarm). One of (1) unknown - status has not yet been defined (2) normal - there are no activated alarms (3) warning - OA, lowest level of 'abnormal' status (4) minor - A3 (5) major - MA (6) critical - CA, highest level of 'abnormal' status (7) unmanaged (8) restricted (9) testing (10) disabled Example values from LibreNMS test devices
| |||||||||||||||||||||
| SsystemVoltage | 1.3.6.1.4.1.6302.2.1.2.2 | Integer32 | RO | 54559 | |||||||||||||||||
scalar · Integer32 · read-only · current System voltage, stored as mV, including positive or negative sign. The integer 2147483647 represents invalid value. Example values from LibreNMS test devices
| |||||||||||||||||||||
| SsystemCurrent | 1.3.6.1.4.1.6302.2.1.2.3 | Integer32 | RO | 3989 | |||||||||||||||||
scalar · Integer32 · read-only · current System current, stored as mA, including positive or negative sign. The integer 2147483647 represents invalid value. Example values from LibreNMS test devices
| |||||||||||||||||||||
| SsystemUsedCapacity | 1.3.6.1.4.1.6302.2.1.2.4 | Integer32 | RO | 8 | |||||||||||||||||
scalar · Integer32 · read-only · current Used capacity, stored as % of the total capacity. The integer 2147483647 represents invalid value. Example values from LibreNMS test devices
| |||||||||||||||||||||
| NpsBattery | 1.3.6.1.4.1.6302.2.1.2.5 | ||||||||||||||||||||
| SpsBatteryVoltage | 1.3.6.1.4.1.6302.2.1.2.5.1 | Integer32 | RO | 54580 | |||||||||||||||||
scalar · Integer32 · read-only · current Battery voltage, stored as mV, including positive or negative sign. The integer 2147483647 represents invalid value. Example values from LibreNMS test devices
| |||||||||||||||||||||
| SpsTotalBatteryCurrent | 1.3.6.1.4.1.6302.2.1.2.5.2 | Integer32 | RO | 0 | |||||||||||||||||
scalar · Integer32 · read-only · current Battery current, stored as mA, including positive or negative sign. The integer 2147483647 represents invalid value. Example values from LibreNMS test devices
| |||||||||||||||||||||
| SpsBatteryCapacity | 1.3.6.1.4.1.6302.2.1.2.5.3 | Integer32 | RO | 100 | |||||||||||||||||
scalar · Integer32 · read-only · current Calculated capacity, stored as % of the total capacity. The integer 2147483647 represents invalid value. Example values from LibreNMS test devices
| |||||||||||||||||||||
| SpsBatteryNominalCapacity | 1.3.6.1.4.1.6302.2.1.2.5.4 | Integer32 | RO | ||||||||||||||||||
scalar · Integer32 · read-only · current nominal installed capacity, stored as mAh. The integer 2147483647 represents invalid value. | |||||||||||||||||||||
| TpsBatteryTable | 1.3.6.1.4.1.6302.2.1.2.5.5 | NA | |||||||||||||||||||
table · not-accessible · current Battery Table. | |||||||||||||||||||||
| RpsBatteryEntry | 1.3.6.1.4.1.6302.2.1.2.5.5.1 | NA | |||||||||||||||||||
| CpsBatteryIndex | 1.3.6.1.4.1.6302.2.1.2.5.5.1.1 | Integer32 (1..16777215) | RO | 116 | |||||||||||||||||
column · Integer32 (1..16777215) · read-only · current Automatically generated index object. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CpsBatteryCurrent | 1.3.6.1.4.1.6302.2.1.2.5.5.1.2 | Integer32 | RO | 0 | |||||||||||||||||
column · Integer32 · read-only · current Battery current in Amps. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CpsBatteryName | 1.3.6.1.4.1.6302.2.1.2.5.5.1.3 | DisplayString | RO | Battery 1 | |||||||||||||||||
column · DisplayString · read-only · current Battery shunt name. Example values from LibreNMS test devices
| |||||||||||||||||||||
| NpsInput | 1.3.6.1.4.1.6302.2.1.2.6 | ||||||||||||||||||||
| SpsInputLineAVoltage | 1.3.6.1.4.1.6302.2.1.2.6.1 | Integer32 | RO | 234803 | |||||||||||||||||
scalar · Integer32 · read-only · current The AC line A voltage, stored as mV. The integer 2147483647 represents invalid value. Example values from LibreNMS test devices
| |||||||||||||||||||||
| SpsInputLineBVoltage | 1.3.6.1.4.1.6302.2.1.2.6.2 | Integer32 | RO | 230669 | |||||||||||||||||
scalar · Integer32 · read-only · current The AC line B voltage, stored as mV. The integer 2147483647 represents invalid value. Example values from LibreNMS test devices
| |||||||||||||||||||||
| SpsInputLineCVoltage | 1.3.6.1.4.1.6302.2.1.2.6.3 | Integer32 | RO | 232580 | |||||||||||||||||
scalar · Integer32 · read-only · current The AC line C voltage, stored as mV. The integer 2147483647 represents invalid value. Example values from LibreNMS test devices
| |||||||||||||||||||||
| NpsTemperature | 1.3.6.1.4.1.6302.2.1.2.7 | ||||||||||||||||||||
| SpsTemperature1 | 1.3.6.1.4.1.6302.2.1.2.7.1 | Integer32 | RO | ||||||||||||||||||
scalar · Integer32 · read-only · current The first route temperature, stored as 0.001 Celsius degree. The integer 2147483647 represents invalid value. | |||||||||||||||||||||
| SpsTemperature2 | 1.3.6.1.4.1.6302.2.1.2.7.2 | Integer32 | RO | ||||||||||||||||||
scalar · Integer32 · read-only · current The second route temperature, stored as 0.001 Celsius degree. The integer 2147483647 represents invalid value.. | |||||||||||||||||||||
| TpsTemperatureTable | 1.3.6.1.4.1.6302.2.1.2.7.3 | NA | |||||||||||||||||||
table · not-accessible · current Temperature Measurement Table. | |||||||||||||||||||||
| RpsTemperatureEntry | 1.3.6.1.4.1.6302.2.1.2.7.3.1 | NA | |||||||||||||||||||
| CpsTemperatureIndex | 1.3.6.1.4.1.6302.2.1.2.7.3.1.1 | Integer32 (1..71) | RO | 73778 | |||||||||||||||||
| CpsTemperatureMeasurement | 1.3.6.1.4.1.6302.2.1.2.7.3.1.2 | Integer32 | RO | 21198 | |||||||||||||||||
| CpsTemperatureName | 1.3.6.1.4.1.6302.2.1.2.7.3.1.3 | DisplayString | RO | System Temperature 1 | |||||||||||||||||
| CpsTemperatureType | 1.3.6.1.4.1.6302.2.1.2.7.3.1.4 | INTEGER | RO | battery(2) | |||||||||||||||||
| CpsTemperatureAlarmStatus | 1.3.6.1.4.1.6302.2.1.2.7.3.1.5 | INTEGER | RO | none(3) | |||||||||||||||||
column · INTEGER · read-only · current Temperature Probe Alarm Status
Example values from LibreNMS test devices
| |||||||||||||||||||||
| SpsStatusCommunication | 1.3.6.1.4.1.6302.2.1.2.8 | INTEGER | RO | normal(2) | |||||||||||||||||
scalar · INTEGER · read-only · current The status of communication with the Power System. interrupt(3) indicates some errors occurred between Power System and agent.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| SpsStatusBatteryMode | 1.3.6.1.4.1.6302.2.1.2.9 | INTEGER | RO | floatCharging(2) | |||||||||||||||||
scalar · INTEGER · read-only · current The status of battery modes, FloatCharging(2), ShortTest(3), BoostChargingForTest(4), ManualTesting(5), PlanTesting(6), ACFailTesting(7), ACFail(8), ManualBoostCharging(9), AutoBoostCharging(10), CyclicBoostCharging(11), MasterBoostCharging(12), MasterBateryTesting(13).
Example values from LibreNMS test devices
| |||||||||||||||||||||
| NpsSMNumber | 1.3.6.1.4.1.6302.2.1.2.10 | ||||||||||||||||||||
| SpsSMACNumber | 1.3.6.1.4.1.6302.2.1.2.10.1 | Integer32 | RO | ||||||||||||||||||
scalar · Integer32 · read-only · current The number of SM AC module. | |||||||||||||||||||||
| SpsSMBATNumber | 1.3.6.1.4.1.6302.2.1.2.10.2 | Integer32 | RO | ||||||||||||||||||
scalar · Integer32 · read-only · current The number of SM BAT module. | |||||||||||||||||||||
| SpsSMIONumber | 1.3.6.1.4.1.6302.2.1.2.10.3 | Integer32 | RO | ||||||||||||||||||
scalar · Integer32 · read-only · current The number of SM IO module. | |||||||||||||||||||||
| NpsRectifier | 1.3.6.1.4.1.6302.2.1.2.11 | ||||||||||||||||||||
| SnumberOfInstalledRectifiers | 1.3.6.1.4.1.6302.2.1.2.11.1 | Integer32 | RO | ||||||||||||||||||
scalar · Integer32 · read-only · current number of rectifiers, stored as integer. The integer 2147483647 represents invalid value. | |||||||||||||||||||||
| SnumberOfRectifiersCommunicating | 1.3.6.1.4.1.6302.2.1.2.11.2 | Integer32 | RO | ||||||||||||||||||
scalar · Integer32 · read-only · current number of rectifiers communicating, stored as integer. The integer 2147483647 represents invalid value. | |||||||||||||||||||||
| SrectifiersUsedCapacity | 1.3.6.1.4.1.6302.2.1.2.11.3 | Integer32 | RO | 8 | |||||||||||||||||
scalar · Integer32 · read-only · current Used capacity, stored as % of the total capacity. The integer 2147483647 represents invalid value. Example values from LibreNMS test devices
| |||||||||||||||||||||
| TpsRectifierTable | 1.3.6.1.4.1.6302.2.1.2.11.4 | NA | |||||||||||||||||||
table · not-accessible · current Table holding information about indivual rectifiers. | |||||||||||||||||||||
| RpsRectifierEntry | 1.3.6.1.4.1.6302.2.1.2.11.4.1 | NA | |||||||||||||||||||
row · not-accessible · current An entry (conceptual row) in the rectifierInfoTable.
| |||||||||||||||||||||
| CpsRectifierIndex | 1.3.6.1.4.1.6302.2.1.2.11.4.1.1 | Integer32 (1..16777215) | RO | 3 | |||||||||||||||||
| CpsRectifierProductNumber | 1.3.6.1.4.1.6302.2.1.2.11.4.1.2 | DisplayString | RO | 1R482000e3 | |||||||||||||||||
column · DisplayString · read-only · current Rectifier Product Number. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CpsRectifierHWVersion | 1.3.6.1.4.1.6302.2.1.2.11.4.1.3 | DisplayString | RO | D10 | |||||||||||||||||
column · DisplayString · read-only · current Rectifier Hardware Revision. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CpsRectifierSWVersion | 1.3.6.1.4.1.6302.2.1.2.11.4.1.4 | DisplayString | RO | 1.09 | |||||||||||||||||
column · DisplayString · read-only · current Rectifier Software Revision. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CpsRectifierSerialNumber | 1.3.6.1.4.1.6302.2.1.2.11.4.1.5 | DisplayString | RO | 15201150840 | |||||||||||||||||
| CpsRectifierCurrent | 1.3.6.1.4.1.6302.2.1.2.11.4.1.6 | Integer32 | RO | 845 | |||||||||||||||||
| CpsRectifierIdent | 1.3.6.1.4.1.6302.2.1.2.11.4.1.7 | DisplayString | RO | Rectifier#1 | |||||||||||||||||
| CpsRectifierFail | 1.3.6.1.4.1.6302.2.1.2.11.4.1.8 | StatusChange | RO | 2 | |||||||||||||||||
column · StatusChange · read-only · current The type of alarm change. One of (1) activated (2) deactivated Example values from LibreNMS test devices
| |||||||||||||||||||||
| NpsDistribution | 1.3.6.1.4.1.6302.2.1.2.12 | ||||||||||||||||||||
| SpsTotalLoadCurrent | 1.3.6.1.4.1.6302.2.1.2.12.1 | Integer32 | RO | ||||||||||||||||||
scalar · Integer32 · read-only · current Total Load current, stored as integer. The integer 2147483647 represents invalid value. | |||||||||||||||||||||
| TpsDistributionLoadTable | 1.3.6.1.4.1.6302.2.1.2.12.2 | NA | |||||||||||||||||||
table · not-accessible · current Distribution Table. | |||||||||||||||||||||
| RpsDistributionLoadEntry | 1.3.6.1.4.1.6302.2.1.2.12.2.1 | NA | |||||||||||||||||||
| CpsDistributionLoadIndex | 1.3.6.1.4.1.6302.2.1.2.12.2.1.1 | Integer32 (1..268386303) | NA | ||||||||||||||||||
column · Integer32 (1..268386303) · not-accessible · current Automatically generated index object. | |||||||||||||||||||||
| CpsDistributionLoadCurrent | 1.3.6.1.4.1.6302.2.1.2.12.2.1.2 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current Distribution current in Amps. | |||||||||||||||||||||
| CpsDistributionLoadName | 1.3.6.1.4.1.6302.2.1.2.12.2.1.3 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current Distribution name. | |||||||||||||||||||||
| TpsDistributionGeneralTable | 1.3.6.1.4.1.6302.2.1.2.12.3 | NA | |||||||||||||||||||
table · not-accessible · current Distribution Table. | |||||||||||||||||||||
| RpsDistributionGeneralEntry | 1.3.6.1.4.1.6302.2.1.2.12.3.1 | NA | |||||||||||||||||||
| CpsDistributionGeneralIndex | 1.3.6.1.4.1.6302.2.1.2.12.3.1.1 | Integer32 (1..268386303) | NA | ||||||||||||||||||
column · Integer32 (1..268386303) · not-accessible · current Automatically generated index object. | |||||||||||||||||||||
| CpsDistributionGeneralCurrent | 1.3.6.1.4.1.6302.2.1.2.12.3.1.2 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current Distribution current in Amps. | |||||||||||||||||||||
| CpsDistributionGeneralName | 1.3.6.1.4.1.6302.2.1.2.12.3.1.3 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current Distribution name. | |||||||||||||||||||||
| NpsConverter | 1.3.6.1.4.1.6302.2.1.2.13 | ||||||||||||||||||||
| SnumberOfInstalledConverters | 1.3.6.1.4.1.6302.2.1.2.13.1 | Integer32 | RO | ||||||||||||||||||
scalar · Integer32 · read-only · current number of converters, stored as integer. The integer 2147483647 represents invalid value. | |||||||||||||||||||||
| SnumberOfConvertersCommunicating | 1.3.6.1.4.1.6302.2.1.2.13.2 | Integer32 | RO | ||||||||||||||||||
scalar · Integer32 · read-only · current number of converters communicating, stored as integer. The integer 2147483647 represents invalid value. | |||||||||||||||||||||
| SconvertersUsedCapacity | 1.3.6.1.4.1.6302.2.1.2.13.3 | Integer32 | RO | ||||||||||||||||||
scalar · Integer32 · read-only · current Used capacity, stored as % of the total capacity. The integer 2147483647 represents invalid value. | |||||||||||||||||||||
| SpsConverterVoltage | 1.3.6.1.4.1.6302.2.1.2.13.4 | Integer32 | RO | 0 | |||||||||||||||||
scalar · Integer32 · read-only · current Converter voltage in mV. The integer 2147483647 represents invalid value. Example values from LibreNMS test devices
| |||||||||||||||||||||
| SpsTotalConverterCurrent | 1.3.6.1.4.1.6302.2.1.2.13.5 | Integer32 | RO | 0 | |||||||||||||||||
scalar · Integer32 · read-only · current Total Converter current in Amps. The integer 2147483647 represents invalid value. Example values from LibreNMS test devices
| |||||||||||||||||||||
| TpsConverterTable | 1.3.6.1.4.1.6302.2.1.2.13.6 | NA | |||||||||||||||||||
table · not-accessible · current Table holding information about indivual converters. | |||||||||||||||||||||
| RpsConverterEntry | 1.3.6.1.4.1.6302.2.1.2.13.6.1 | NA | |||||||||||||||||||
row · not-accessible · current An entry (conceptual row) in the ConverterInfoTable.
| |||||||||||||||||||||
| CpsConverterIndex | 1.3.6.1.4.1.6302.2.1.2.13.6.1.1 | Integer32 (1..100) | RO | ||||||||||||||||||
column · Integer32 (1..100) · read-only · current Automatically generated index object. | |||||||||||||||||||||
| CpsConverterProductNumber | 1.3.6.1.4.1.6302.2.1.2.13.6.1.2 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current Converter Product Number. | |||||||||||||||||||||
| CpsConverterHWVersion | 1.3.6.1.4.1.6302.2.1.2.13.6.1.3 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current Converter Hardware Revision. | |||||||||||||||||||||
| CpsConverterSWVersion | 1.3.6.1.4.1.6302.2.1.2.13.6.1.4 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current Converter Software Revision. | |||||||||||||||||||||
| CpsConverterSerialNumber | 1.3.6.1.4.1.6302.2.1.2.13.6.1.5 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current Converter Serial Number. | |||||||||||||||||||||
| CpsConverterCurrent | 1.3.6.1.4.1.6302.2.1.2.13.6.1.6 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current Converter Current. | |||||||||||||||||||||
| CpsConverterIdent | 1.3.6.1.4.1.6302.2.1.2.13.6.1.7 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current Converter physical location identifier. | |||||||||||||||||||||
| CpsConverterFail | 1.3.6.1.4.1.6302.2.1.2.13.6.1.8 | StatusChange | RO | ||||||||||||||||||
column · StatusChange · read-only · current The type of alarm change. One of (1) activated (2) deactivated | |||||||||||||||||||||
| NpsControl | 1.3.6.1.4.1.6302.2.1.2.14 | ||||||||||||||||||||
| ScontrolBatteryTest | 1.3.6.1.4.1.6302.2.1.2.14.1 | Integer32 | RW | ||||||||||||||||||
scalar · Integer32 · read-write · current Control battery test, start(1), stop (0). | |||||||||||||||||||||
| ScontrolRelay8 | 1.3.6.1.4.1.6302.2.1.2.14.2 | Integer32 | RW | ||||||||||||||||||
scalar · Integer32 · read-write · current Control relay8, close(1), open(0). | |||||||||||||||||||||
| ScontrolRelay7 | 1.3.6.1.4.1.6302.2.1.2.14.3 | Integer32 | RW | ||||||||||||||||||
scalar · Integer32 · read-write · current Control relay7, close(1), open(0). | |||||||||||||||||||||
| ScontrolRelay6 | 1.3.6.1.4.1.6302.2.1.2.14.4 | Integer32 | RW | ||||||||||||||||||
scalar · Integer32 · read-write · current Control relay6, close(1), open(0). | |||||||||||||||||||||
| ScontrolRelayTest | 1.3.6.1.4.1.6302.2.1.2.14.5 | Integer32 | RW | ||||||||||||||||||
scalar · Integer32 · read-write · current Control Relay test, start(1), stop (0). | |||||||||||||||||||||
| TpsEquipmentSignalTable | 1.3.6.1.4.1.6302.2.1.2.15 | NA | |||||||||||||||||||
table · not-accessible · current Table of indexed equipment signal values. | |||||||||||||||||||||
| RequipmentSignalTableEntry | 1.3.6.1.4.1.6302.2.1.2.15.1 | NA | |||||||||||||||||||
row · not-accessible · current An entry (conceptual row) in the psEquipment Signal Table. | |||||||||||||||||||||
| CpsEquipmentSignalTableEntryIndex | 1.3.6.1.4.1.6302.2.1.2.15.1.1 | Integer32 (1..268386303) | RO | ||||||||||||||||||
column · Integer32 (1..268386303) · read-only · current The unique sequence number of this equipment signal. | |||||||||||||||||||||
| CpsEquipmentSignalValue | 1.3.6.1.4.1.6302.2.1.2.15.1.2 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current Indexed equipment signal value. | |||||||||||||||||||||
| SalarmLastTrapNo | 1.3.6.1.4.1.6302.2.1.3 | Counter32 | RO | ||||||||||||||||||
scalar · Counter32 · read-only · current The sequence number of last submitted alarm trap, also last row in alarmTrapTable. | |||||||||||||||||||||
| TalarmActiveAlarmTable | 1.3.6.1.4.1.6302.2.1.4 | NA | |||||||||||||||||||
table · not-accessible · current Table holding information about the currently active alarms. | |||||||||||||||||||||
| RactiveAlarmEntry | 1.3.6.1.4.1.6302.2.1.4.1 | NA | |||||||||||||||||||
| CalarmIndex | 1.3.6.1.4.1.6302.2.1.4.1.1 | Counter32 | RO | ||||||||||||||||||
column · Counter32 · read-only · current The unique sequence number of this alarm trap. | |||||||||||||||||||||
| CalarmTime | 1.3.6.1.4.1.6302.2.1.4.1.2 | DateAndTime | RO | ||||||||||||||||||
column · DateAndTime · read-only · current Date and time when event occured (local time), including timezone if supported by controller. | |||||||||||||||||||||
| CalarmStatusChange | 1.3.6.1.4.1.6302.2.1.4.1.3 | StatusChange | RO | ||||||||||||||||||
column · StatusChange · read-only · current The type of alarm change. One of (1) activated (2) deactivated | |||||||||||||||||||||
| CalarmSeverity | 1.3.6.1.4.1.6302.2.1.4.1.4 | Status | RO | ||||||||||||||||||
column · Status · read-only · current The severity of the alarm. One of (3) warning - OA, lowest level of alarm severity (4) minor - A3 (5) major - MA (6) critical - CA, highest level of alarm severity | |||||||||||||||||||||
| CalarmDescription | 1.3.6.1.4.1.6302.2.1.4.1.5 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current Free-text description of alarm. | |||||||||||||||||||||
| CalarmType | 1.3.6.1.4.1.6302.2.1.4.1.6 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current Alarm type, i.e. an integer specifying the type of alarm. | |||||||||||||||||||||
| NpowerEvents | 1.3.6.1.4.1.6302.2.1.5 | ||||||||||||||||||||
| !alarmTrap | 1.3.6.1.4.1.6302.2.1.5.1 | ||||||||||||||||||||
notification · current An alarm trap is sent when an alarm occurs (activated) or
returns to normal state (deactivated). Alarm traps are logged
in alarmTrapTable. Variables in this trap:
* alarmIndex - The unique sequence number of this alarm trap.
* alarmTime - Date and time when event occured (local time),
including timezone if supported by controller.
* alarmStatusChange - (1) activated or (2) deactivated.
* alarmSeverity - Integer describing the severity of the alarm.
* alarmDescription - Free-text description of alarm.
* alarmType - Integer indicating type of alarm. | |||||||||||||||||||||
| !alarmActiveTrap | 1.3.6.1.4.1.6302.2.1.5.2 | ||||||||||||||||||||
notification · current An alarm trap is sent when an alarm occurs (activated)
Variables in this trap
* alarmTime - Date and time when event occured (local time),
including timezone if supported by controller.
* alarmSeverity - Integer describing the severity of the alarm.
* alarmDescription - Free-text description of alarm.
* alarmType - Integer indicating type of alarm.
| |||||||||||||||||||||
| !alarmCeaseTrap | 1.3.6.1.4.1.6302.2.1.5.3 | ||||||||||||||||||||
notification · current An alarm trap is sent when an alarm returns to normal state (clear, deactivated).
Variables in this trap:
* alarmTime - Date and time when event occured (local time),
including timezone if supported by controller.
* alarmSeverity - Integer describing the severity of the alarm.
* alarmDescription - Free-text description of alarm.
* alarmType - Integer indicating type of alarm.
| |||||||||||||||||||||
Textual conventions
StatusINTEGERcritical(6)disabled(10)major(5)minor(4)normal(2)restricted(8)testing(9)unknown(1)unmanaged(7)warning(3)This integer value represents the operational or administrative status of the system. Also used as alarm severity. Depending on situation there may be limits on allowed values. Operational values: (1) unknown - status has not yet been defined (2) normal - there are no activated alarms (3) warning - OA, lowest level of 'abnormal' status (4) minor - A3 (5) major - MA (6) critical - CA, highest level of 'abnormal' status Administrative values: (7) unmanaged (8) restricted (9) testing (10) disabled
StatusChangeINTEGERactivated(1)deactivated(2)Indicates 'activated' (1) or 'deactivated' (2) alarm events.
Traps / Notifications
- alarmActiveTrap
1.3.6.1.4.1.6302.2.1.5.2 - alarmCeaseTrap
1.3.6.1.4.1.6302.2.1.5.3 - alarmTrap
1.3.6.1.4.1.6302.2.1.5.1