ELTEX-PHY-MIB
Eltex Enterprise, Ltd.The MIB module describes the private MIB for L1 testing.
snmptranslate -m ELTEX-PHY-MIB -Tpsnmpwalk -v2c -c <community> -m ELTEX-PHY-MIB <host> 1.3.6.1.4.1.35265.52Imports
| ELTEX-SMI-ACTUAL | eltexLtd |
|---|---|
| IF-MIB | ifIndex |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
| SNMPv2-SMI | Bits, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso |
| SNMPv2-TC | DisplayString, PhysAddress, TEXTUAL-CONVENTION, TruthValue |
OID tree
| Name | OID | Type | Access | Status | Example | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| IeltexPhyMIB | 1.3.6.1.4.1.35265.52 | ||||||||||||||||||||
identity The MIB module describes the private MIB for L1 testing. | |||||||||||||||||||||
| NeltexPhyObjects | 1.3.6.1.4.1.35265.52.1 | ||||||||||||||||||||
| NeltexPhyTransceiverObjects | 1.3.6.1.4.1.35265.52.1.1 | ||||||||||||||||||||
| NeltexPhyTransceiverGlobals | 1.3.6.1.4.1.35265.52.1.1.1 | ||||||||||||||||||||
| NeltexPhyTransceiverConfigs | 1.3.6.1.4.1.35265.52.1.1.2 | ||||||||||||||||||||
| NeltexPhyTransceiverStatistics | 1.3.6.1.4.1.35265.52.1.1.3 | ||||||||||||||||||||
| TeltexPhyTransceiverInfoTable | 1.3.6.1.4.1.35265.52.1.1.3.1 | NA | |||||||||||||||||||
table · not-accessible · current This table show the information of interfaces transceivers. | |||||||||||||||||||||
| ReltexPhyTransceiverInfoEntry | 1.3.6.1.4.1.35265.52.1.1.3.1.1 | NA | |||||||||||||||||||
| CeltexPhyTransceiverInfoConnectorType | 1.3.6.1.4.1.35265.52.1.1.3.1.1.1 | EltexPhyTransConnectorType | RO | 0 | |||||||||||||||||
column · EltexPhyTransConnectorType · read-only · current Connector type of the interface transceiver. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CeltexPhyTransceiverInfoType | 1.3.6.1.4.1.35265.52.1.1.3.1.1.2 | EltexPhyTransType | RO | 0 | |||||||||||||||||
column · EltexPhyTransType · read-only · current Type of the interface transceiver. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CeltexPhyTransceiverInfoComplianceCode | 1.3.6.1.4.1.35265.52.1.1.3.1.1.3 | OCTET STRING | RO | | |||||||||||||||||
column · OCTET STRING · read-only · current Compliance code of the interface transceiver. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CeltexPhyTransceiverInfoWaveLength | 1.3.6.1.4.1.35265.52.1.1.3.1.1.4 | Integer32 | RO | 0 | |||||||||||||||||
column · Integer32 · read-only · current Wave length of the interface transceiver, measured in nanometer. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CeltexPhyTransceiverInfoVendorName | 1.3.6.1.4.1.35265.52.1.1.3.1.1.5 | OCTET STRING | RO | | |||||||||||||||||
column · OCTET STRING · read-only · current Vendor name of the interface transceiver. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CeltexPhyTransceiverInfoSerialNumber | 1.3.6.1.4.1.35265.52.1.1.3.1.1.6 | OCTET STRING | RO | | |||||||||||||||||
column · OCTET STRING · read-only · current Serial number of the interface transceiver. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CeltexPhyTransceiverInfoFiberDiameter | 1.3.6.1.4.1.35265.52.1.1.3.1.1.7 | EltexPhyTransFiberDiameter | RO | 65535 | |||||||||||||||||
column · EltexPhyTransFiberDiameter · read-only · current Fiber diameter of the interface transceiver. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CeltexPhyTransceiverInfoTransferDistance | 1.3.6.1.4.1.35265.52.1.1.3.1.1.8 | Integer32 | RO | 0 | |||||||||||||||||
column · Integer32 · read-only · current The maximal distance which the interface transceiver could transmit, measured in meter. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CeltexPhyTransceiverInfoDiagnosticSupported | 1.3.6.1.4.1.35265.52.1.1.3.1.1.9 | TruthValue | RO | 0 | |||||||||||||||||
column · TruthValue · read-only · current Indicating whether the digital diagnostic monitoring function is supported or not on the interface transceiver. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CeltexPhyTransceiverInfoPartNumber | 1.3.6.1.4.1.35265.52.1.1.3.1.1.10 | OCTET STRING | RO | | |||||||||||||||||
column · OCTET STRING · read-only · current Part number of the interface transceiver provided by SFP vendor. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CeltexPhyTransceiverInfoVendorRevision | 1.3.6.1.4.1.35265.52.1.1.3.1.1.11 | OCTET STRING | RO | | |||||||||||||||||
column · OCTET STRING · read-only · current Revision level for part number provided by vendor. Example values from LibreNMS test devices
| |||||||||||||||||||||
| TeltexPhyTransceiverDiagnosticTable | 1.3.6.1.4.1.35265.52.1.1.3.2 | NA | |||||||||||||||||||
table · not-accessible · current This table show current DDM values and thresholds of the interface transceiver. | |||||||||||||||||||||
| ReltexPhyTransceiverDiagnosticEntry | 1.3.6.1.4.1.35265.52.1.1.3.2.1 | NA | |||||||||||||||||||
row · not-accessible · current The entry of the eltexPhyTransceiverDiagnosticTable. | |||||||||||||||||||||
| CeltexPhyTransceiverDiagnosticType | 1.3.6.1.4.1.35265.52.1.1.3.2.1.1 | EltexPhyTransDiagnosticType | NA | ||||||||||||||||||
column · EltexPhyTransDiagnosticType · not-accessible · current Type of the transceiver diagnostic. | |||||||||||||||||||||
| CeltexPhyTransceiverDiagnosticChannel | 1.3.6.1.4.1.35265.52.1.1.3.2.1.2 | INTEGER (1..4) | NA | ||||||||||||||||||
column · INTEGER (1..4) · not-accessible · current Transceiver channel number. | |||||||||||||||||||||
| CeltexPhyTransceiverDiagnosticUnits | 1.3.6.1.4.1.35265.52.1.1.3.2.1.3 | DisplayString | RO | | |||||||||||||||||
column · DisplayString · read-only · current Unit of measure for current diagnostic type. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CeltexPhyTransceiverDiagnosticHighAlarmThreshold | 1.3.6.1.4.1.35265.52.1.1.3.2.1.4 | INTEGER | RO | 0 | |||||||||||||||||
column · INTEGER · read-only · current Transceiver HighAlarm threshold for current diagnostic type. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CeltexPhyTransceiverDiagnosticHighWarningThreshold | 1.3.6.1.4.1.35265.52.1.1.3.2.1.5 | INTEGER | RO | 0 | |||||||||||||||||
column · INTEGER · read-only · current Transceiver HighWarning threshold for current diagnostic type. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CeltexPhyTransceiverDiagnosticLowWarningThreshold | 1.3.6.1.4.1.35265.52.1.1.3.2.1.6 | INTEGER | RO | 0 | |||||||||||||||||
column · INTEGER · read-only · current Transceiver LowWarning threshold for current diagnostic type. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CeltexPhyTransceiverDiagnosticLowAlarmThreshold | 1.3.6.1.4.1.35265.52.1.1.3.2.1.7 | INTEGER | RO | 0 | |||||||||||||||||
column · INTEGER · read-only · current Transceiver LowAlarm threshold for current diagnostic type. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CeltexPhyTransceiverDiagnosticCurrentValue | 1.3.6.1.4.1.35265.52.1.1.3.2.1.8 | INTEGER | RO | 0 | |||||||||||||||||
column · INTEGER · read-only · current Measured value for current transceiver diagnostic type. Example values from LibreNMS test devices
| |||||||||||||||||||||
| NeltexPhyTestObjects | 1.3.6.1.4.1.35265.52.1.2 | ||||||||||||||||||||
| NeltexPhyTestGlobals | 1.3.6.1.4.1.35265.52.1.2.1 | ||||||||||||||||||||
| TeltexPhyTestSetTable | 1.3.6.1.4.1.35265.52.1.2.1.1 | NA | |||||||||||||||||||
table · not-accessible · current A table containing objects for invoking tests on an interface. | |||||||||||||||||||||
| ReltexPhyTestSetEntry | 1.3.6.1.4.1.35265.52.1.2.1.1.1 | NA | |||||||||||||||||||
row · not-accessible · current An entry containing objects for invoking tests on an interface.
| |||||||||||||||||||||
| CeltexPhyTestSetType | 1.3.6.1.4.1.35265.52.1.2.1.1.1.1 | EltexPhyTestSetType | RW | ||||||||||||||||||
column · EltexPhyTestSetType · read-write · current A control variable used to start operator initiated interface tests. | |||||||||||||||||||||
| TeltexPhyTestGetTable | 1.3.6.1.4.1.35265.52.1.2.1.2 | NA | |||||||||||||||||||
table · not-accessible · current A table containing results of tests on an interface. | |||||||||||||||||||||
| ReltexPhyTestGetEntry | 1.3.6.1.4.1.35265.52.1.2.1.2.1 | NA | |||||||||||||||||||
row · not-accessible · current An entry containing results of tests on an interface.
| |||||||||||||||||||||
| CeltexPhyTestGetType | 1.3.6.1.4.1.35265.52.1.2.1.2.1.1 | EltexPhyTestGetType | NA | ||||||||||||||||||
column · EltexPhyTestGetType · not-accessible · current The type of test the user performed. | |||||||||||||||||||||
| CeltexPhyTestGetStatus | 1.3.6.1.4.1.35265.52.1.2.1.2.1.2 | EltexPhyTestGetStatus | RO | ||||||||||||||||||
column · EltexPhyTestGetStatus · read-only · current This object contains the status of the most recently requested test for operator initiated tests or the value none(1) if no tests have been requested since the last reset. For non operator initiated tests the value is always none(1). Note that this facility provides no provision for saving the results of one test when starting another, as could be required if used by multiple managers concurrently. | |||||||||||||||||||||
| CeltexPhyTestGetResult | 1.3.6.1.4.1.35265.52.1.2.1.2.1.3 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current This object holds the test result | |||||||||||||||||||||
| CeltexPhyTestGetUnits | 1.3.6.1.4.1.35265.52.1.2.1.2.1.4 | EltexPhyTestGetUnits | RO | ||||||||||||||||||
column · EltexPhyTestGetUnits · read-only · current The test result unit of measure. The units can be standard unit or special units that are designed for special test. | |||||||||||||||||||||
| CeltexPhyTestGetTimeStamp | 1.3.6.1.4.1.35265.52.1.2.1.2.1.5 | DisplayString (SIZE (1..32)) | RO | ||||||||||||||||||
column · DisplayString (SIZE (1..32)) · read-only · current The time in string (formated DD-MMM-YYYY HH:MM:SS e.g 14-Apr-2002 10:33:31) | |||||||||||||||||||||
Textual conventions
EltexPhyTestGetStatusINTEGERaborted(6)failed(7)inProgress(3)none(1)notSupported(4)success(2)unableToRun(5)Status of test
EltexPhyTestGetTypeINTEGERchannelACross(21)channelALength(17)channelALineDriver(13)channelAMismatch(9)channelAOpen(5)channelAShort(1)channelBCross(22)channelBLength(18)channelBLineDriver(14)channelBMismatch(10)channelBOpen(6)channelBShort(2)channelCCross(23)channelCLength(19)channelCLineDriver(15)channelCMismatch(11)channelCOpen(7)channelCShort(3)channelDCross(24)channelDLength(20)channelDLineDriver(16)channelDMismatch(12)channelDOpen(8)channelDShort(4)A value indicating the performed test.
EltexPhyTestGetUnitsINTEGERboolean(2)integer(1)meter(3)Units of test
EltexPhyTestSetTypeINTEGERcableStatus(1)A value indicating the test to perform.
EltexPhyTransConnectorTypeINTEGERbnc-tnc(4)copper-pigtail(33)fibre-ch-coaxial-headers(5)fibre-ch-st1(2)fibre-ch-st2(3)fibrejack(6)hssdc-ii(32)lc(7)mpo-parallel-optic(12)mt-rj(8)mu(9)no-separable-connector(35)optical-pigtail(11)rj45(34)sc(1)sg(10)unallocated(127)unknown(0)vendorspec(255)Transceiver connector type.
EltexPhyTransDiagnosticTypeINTEGERlossOfSignal(6)rxOpticalPower(5)supplyVoltage(2)temperature(1)txBiasCurrent(3)txOpticalPower(4)Transceiver diagnostic type.
EltexPhyTransFiberDiameterINTEGERcopper(4)fiber50(2)fiber625(3)fiber9(1)unknown(65535)The diameter of the fiber, measured in micron. fiber9 - 9 micron multi-mode fiber fiber50 - 50 micron multi-mode fiber fiber625 - 62.5 micron multi-mode fiber copper - copper cable.
EltexPhyTransTypeINTEGERdwdm-sfp(11)gbic(1)qsfp(12)qsfpplus(13)reserved(127)sff(2)sfp-sfpplus(3)unknown(0)vendorspec(255)x2(10)xbi-300-pin(4)xenpak(5)xff(7)xfp(6)xfp-e(8)xpak(9)Transceiver type.