ELTEX-MES-PHYSICAL-DESCRIPTION-MIB
Eltex Enterprise, Ltd.The private MIB module definition for physical device configuration and information.
snmptranslate -m ELTEX-MES-PHYSICAL-DESCRIPTION-MIB -Tpsnmpwalk -v2c -c <community> -m ELTEX-MES-PHYSICAL-DESCRIPTION-MIB <host> 1.3.6.1.4.1.35265.1.23.53Imports
| ELTEX-MES | eltMes |
|---|---|
| IF-MIB | InterfaceIndex, InterfaceIndexOrZero, ifIndex |
| MAU-MIB | JackType |
| RADLAN-Physicaldescription-MIB | rlCascadeAdminEntry, rlCascadeEntry, rlPhdUnitGenParamEntry |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
| SNMPv2-SMI | Bits, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso |
| SNMPv2-TC | DisplayString, PhysAddress, RowStatus, TEXTUAL-CONVENTION, TruthValue |
OID tree
| Name | OID | Type | Access | Status | Example | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| IeltMesPhysicalDescription | 1.3.6.1.4.1.35265.1.23.53 | ||||||||||||||||||||
identity The private MIB module definition for physical device configuration and information. | |||||||||||||||||||||
| NeltMesPhdTransceiver | 1.3.6.1.4.1.35265.1.23.53.1 | ||||||||||||||||||||
| TeltPhdTransceiverInfoTable | 1.3.6.1.4.1.35265.1.23.53.1.1 | NA | |||||||||||||||||||
table · not-accessible · current This table show the information of transceiver on interface. | |||||||||||||||||||||
| ReltPhdTransceiverInfoEntry | 1.3.6.1.4.1.35265.1.23.53.1.1.1 | NA | |||||||||||||||||||
| CeltPhdTransceiverInfoConnectorType | 1.3.6.1.4.1.35265.1.23.53.1.1.1.1 | INTEGER | RO | lc(7) | |||||||||||||||||
column · INTEGER · read-only · current Connector type of the interface.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CeltPhdTransceiverInfoType | 1.3.6.1.4.1.35265.1.23.53.1.1.1.2 | INTEGER | RO | sfp-sfpplus(3) | |||||||||||||||||
column · INTEGER · read-only · current Type of the interface, such as SFP/XFP/GBIC.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CeltPhdTransceiverInfoComplianceCode | 1.3.6.1.4.1.35265.1.23.53.1.1.1.3 | OCTET STRING | RO | 1000BASE-LX | |||||||||||||||||
column · OCTET STRING · read-only · current Compliance code read from the transceiver. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CeltPhdTransceiverInfoWaveLength | 1.3.6.1.4.1.35265.1.23.53.1.1.1.4 | Integer32 | RO | 1310 | |||||||||||||||||
column · Integer32 · read-only · current Wave length of the interface, measured in nanometer. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CeltPhdTransceiverInfoVendorName | 1.3.6.1.4.1.35265.1.23.53.1.1.1.5 | OCTET STRING | RO | TP-LINK | |||||||||||||||||
column · OCTET STRING · read-only · current Vendor name of the interface. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CeltPhdTransceiverInfoSerialNumber | 1.3.6.1.4.1.35265.1.23.53.1.1.1.6 | OCTET STRING | RO | 2206324001316 | |||||||||||||||||
column · OCTET STRING · read-only · current Serial number of the interface. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CeltPhdTransceiverInfoFiberDiameterType | 1.3.6.1.4.1.35265.1.23.53.1.1.1.7 | INTEGER | RO | fiber9(1) | |||||||||||||||||
column · INTEGER · read-only · current The diameter of the fiber, measured in micron. fiber9 - 9 micron multi-mode fiber fiber50 - 50 micron multi-mode fiber fiber625 - 62.5 micron multi-mode fiber copper - copper cable.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CeltPhdTransceiverInfoTransferDistance | 1.3.6.1.4.1.35265.1.23.53.1.1.1.8 | Integer32 | RO | 0 | |||||||||||||||||
column · Integer32 · read-only · current The maximal distance which the interface could transmit, measured in meter. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CeltPhdTransceiverInfoDiagnostic | 1.3.6.1.4.1.35265.1.23.53.1.1.1.9 | TruthValue | RO | 1 | |||||||||||||||||
column · TruthValue · read-only · current Indicating whether the digital diagnostic monitoring function is supported or not. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CeltPhdTransceiverInfoPartNumber | 1.3.6.1.4.1.35265.1.23.53.1.1.1.10 | OCTET STRING | RO | TL-SM311LS(UN) | |||||||||||||||||
column · OCTET STRING · read-only · current Part number provided by SFP vendor. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CeltPhdTransceiverInfoVendorRev | 1.3.6.1.4.1.35265.1.23.53.1.1.1.11 | OCTET STRING | RO | 4.0 | |||||||||||||||||
column · OCTET STRING · read-only · current Revision level for part number provided by vendor. Example values from LibreNMS test devices
| |||||||||||||||||||||
| TeltPhdTransceiverThresholdTable | 1.3.6.1.4.1.35265.1.23.53.1.2 | NA | |||||||||||||||||||
table · not-accessible · current This table contains the threshold information of transceiver. | |||||||||||||||||||||
| ReltPhdTransceiverThresholdEntry | 1.3.6.1.4.1.35265.1.23.53.1.2.1 | NA | |||||||||||||||||||
row · not-accessible · current The entry of the eltPhdTransceiverThresholdTable. | |||||||||||||||||||||
| CeltPhdTransceiverThresholdType | 1.3.6.1.4.1.35265.1.23.53.1.2.1.1 | INTEGER | RO | temperature(0) | |||||||||||||||||
column · INTEGER · read-only · current A value indicating the threshold to configure. temperature - degree (Celsius) -127-127, voltage - microVolt 0-6550000, current - microAmper 0-131000, output power or input power - microWatt 0-6553
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CeltPhdTransceiverThresholdAction | 1.3.6.1.4.1.35265.1.23.53.1.2.1.2 | INTEGER | RO | none(0) | |||||||||||||||||
column · INTEGER · read-only · current What action to perform when value is bad.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CeltPhdTransceiverThresholdHighAlarm | 1.3.6.1.4.1.35265.1.23.53.1.2.1.3 | INTEGER | RO | 2147483647 | |||||||||||||||||
column · INTEGER · read-only · current See eltPhdTransceiverThresholdType for details Example values from LibreNMS test devices
| |||||||||||||||||||||
| CeltPhdTransceiverThresholdHighWarning | 1.3.6.1.4.1.35265.1.23.53.1.2.1.4 | INTEGER | RO | 2147483647 | |||||||||||||||||
column · INTEGER · read-only · current See eltPhdTransceiverThresholdType for details Example values from LibreNMS test devices
| |||||||||||||||||||||
| CeltPhdTransceiverThresholdLowWarning | 1.3.6.1.4.1.35265.1.23.53.1.2.1.5 | INTEGER | RO | 2147483647 | |||||||||||||||||
column · INTEGER · read-only · current See eltPhdTransceiverThresholdType for details Example values from LibreNMS test devices
| |||||||||||||||||||||
| CeltPhdTransceiverThresholdLowAlarm | 1.3.6.1.4.1.35265.1.23.53.1.2.1.6 | INTEGER | RO | 2147483647 | |||||||||||||||||
column · INTEGER · read-only · current See eltPhdTransceiverThresholdType for details Example values from LibreNMS test devices
| |||||||||||||||||||||
| TeltPhdUnitGenParamTable | 1.3.6.1.4.1.35265.1.23.53.2 | NA | |||||||||||||||||||
table · not-accessible · current For each module (board) there is an entry describing it in this module | |||||||||||||||||||||
| ReltPhdUnitGenParamEntry | 1.3.6.1.4.1.35265.1.23.53.2.1 | NA | |||||||||||||||||||
row · not-accessible · current This table augments existing RADLAN table rlPhdUnitGenParamTable
| |||||||||||||||||||||
| CeltPhdUnitGenParamCommitHash | 1.3.6.1.4.1.35265.1.23.53.2.1.1 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current Hash of current commit. | |||||||||||||||||||||
| CeltPhdUnitGenParamBuildTag | 1.3.6.1.4.1.35265.1.23.53.2.1.2 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current Build branch. | |||||||||||||||||||||
| CeltPhdUnitGenParamBuildNumber | 1.3.6.1.4.1.35265.1.23.53.2.1.3 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current Build describe number. | |||||||||||||||||||||
| TeltCascadeTable | 1.3.6.1.4.1.35265.1.23.53.3 | NA | |||||||||||||||||||
table · not-accessible · current This table augments existing RADLAN table rlCascadeTable. | |||||||||||||||||||||
| ReltCascadeEntry | 1.3.6.1.4.1.35265.1.23.53.3.1 | NA | |||||||||||||||||||
row · not-accessible · current An entry of this table specifies a cascaded link information in a unit
| |||||||||||||||||||||
| CeltCascadeLastChange | 1.3.6.1.4.1.35265.1.23.53.3.1.1 | TimeTicks | RO | ||||||||||||||||||
column · TimeTicks · read-only · current The value of sysUpTime at the time the cascade interface entered its current operational state. | |||||||||||||||||||||
| CeltCascadeOperStatus | 1.3.6.1.4.1.35265.1.23.53.3.1.2 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current This variable indicates the state of this interface.
| |||||||||||||||||||||
| CeltCascadeDuplexOperMode | 1.3.6.1.4.1.35265.1.23.53.3.1.3 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current This variable indicates whether this interface operates in half duplex or full duplex mode.
| |||||||||||||||||||||
| CeltCascadeOperSpeedDuplexAutoNegotiation | 1.3.6.1.4.1.35265.1.23.53.3.1.4 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current If enabled the speed and duplex are determined by the device through the autonegotiation process.
| |||||||||||||||||||||
| CeltCascadeOperMdix | 1.3.6.1.4.1.35265.1.23.53.3.1.5 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current cross - The interface is in crossover mode.
normal - The interface is not in crossover mode.
unknown - Only for port that its operative status is not present
or down.
| |||||||||||||||||||||
| CeltCascadeTransceiverType | 1.3.6.1.4.1.35265.1.23.53.3.1.6 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current This variable indicates the transceiver type of this interface.
| |||||||||||||||||||||
| CeltCascadeIfType | 1.3.6.1.4.1.35265.1.23.53.3.1.7 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current This variable specifies the type of interface.
| |||||||||||||||||||||
| CeltCascadeFecOperMode | 1.3.6.1.4.1.35265.1.23.53.3.1.8 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current This variable indicates the actual Forward Error Correction (FEC) mode that currently in use on the port.
| |||||||||||||||||||||
| NeltMesPhdNsf | 1.3.6.1.4.1.35265.1.23.53.4 | ||||||||||||||||||||
| SeltPhdNsfEnable | 1.3.6.1.4.1.35265.1.23.53.4.1 | TruthValue | RW | ||||||||||||||||||
scalar · TruthValue · read-write · current Enable Non-Stop Forwarding during the stack master switchover. | |||||||||||||||||||||
| SeltPhdNsfTime | 1.3.6.1.4.1.35265.1.23.53.4.2 | INTEGER (60..600) | RW | ||||||||||||||||||
scalar · INTEGER (60..600) · read-write · current Set the time period in which protocols wait for the new master to complete initialization. The port states set by the former master is preserved during this time. | |||||||||||||||||||||
| TeltCascadeAdminTable | 1.3.6.1.4.1.35265.1.23.53.6 | NA | |||||||||||||||||||
table · not-accessible · current This table augments existing RADLAN table rlCascadeAdminTable. | |||||||||||||||||||||
| ReltCascadeAdminEntry | 1.3.6.1.4.1.35265.1.23.53.6.1 | NA | |||||||||||||||||||
row · not-accessible · current An entry of this table specifies a cascaded information in a unit after reset
| |||||||||||||||||||||
| CeltCascadeAdminFec | 1.3.6.1.4.1.35265.1.23.53.6.1.1 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current This variable controls the Forward Error Correction (FEC) mode on the port.
| |||||||||||||||||||||