EdgeSwitch-SWITCHING-MIB
Broadcom LimitedThe Ubiquiti Private MIB for FastPath Switching
snmptranslate -m EdgeSwitch-SWITCHING-MIB -Tpsnmpwalk -v2c -c <community> -m EdgeSwitch-SWITCHING-MIB <host> 1.3.6.1.4.1.4413.1.1.1Imports
| EdgeSwitch-LOGGING-MIB | AgentLogSeverity |
|---|---|
| EdgeSwitch-REF-MIB | AgentPortMask, fastPath |
| IANAifType-MIB | IANAifType |
| IF-MIB | InterfaceIndex, InterfaceIndexOrZero, ifIndex |
| INET-ADDRESS-MIB | InetAddress, InetAddressType |
| Q-BRIDGE-MIB | VlanId, VlanIndex, dot1qFdbId, dot1qVlanIndex |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
| SNMPv2-SMI | Bits, Counter32, Counter64, Gauge32, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso |
| SNMPv2-TC | DateAndTime, DisplayString, MacAddress, PhysAddress, RowStatus, TEXTUAL-CONVENTION, TruthValue |
OID tree
| Name | OID | Type | Access | Status | Example | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| IfastPathSwitching | 1.3.6.1.4.1.4413.1.1.1 | ||||||||||||||||||||
identity The Ubiquiti Private MIB for FastPath Switching | |||||||||||||||||||||
| NfastPathSwitchingTraps | 1.3.6.1.4.1.4413.1.1.1.0 | ||||||||||||||||||||
| !multipleUsersTrap | 1.3.6.1.4.1.4413.1.1.1.0.1 | ||||||||||||||||||||
notification · current This trap is sent when more than one user is logged in with administrative access. Only applies to CLI interface. | |||||||||||||||||||||
| !broadcastStormStartTrap | 1.3.6.1.4.1.4413.1.1.1.0.2 | obsolete | |||||||||||||||||||
notification · obsolete This trap is sent when a broadcast storm is detected. | |||||||||||||||||||||
| !broadcastStormEndTrap | 1.3.6.1.4.1.4413.1.1.1.0.3 | obsolete | |||||||||||||||||||
notification · obsolete This trap is sent when a broadcast storm is no longer detected. | |||||||||||||||||||||
| !linkFailureTrap | 1.3.6.1.4.1.4413.1.1.1.0.4 | obsolete | |||||||||||||||||||
| !vlanRequestFailureTrap | 1.3.6.1.4.1.4413.1.1.1.0.5 | obsolete | |||||||||||||||||||
notification · obsolete
| |||||||||||||||||||||
| !vlanDeleteLastTrap | 1.3.6.1.4.1.4413.1.1.1.0.6 | ||||||||||||||||||||
notification · current Trap is sent when attempting to delete the last configured VLAN or the Default VLAN.
| |||||||||||||||||||||
| !vlanDefaultCfgFailureTrap | 1.3.6.1.4.1.4413.1.1.1.0.7 | ||||||||||||||||||||
notification · current Trap is sent if there are failures in resetting VLAN configuration to defaults.
| |||||||||||||||||||||
| !vlanRestoreFailureTrap | 1.3.6.1.4.1.4413.1.1.1.0.8 | obsolete | |||||||||||||||||||
notification · obsolete
| |||||||||||||||||||||
| !fanFailureTrap | 1.3.6.1.4.1.4413.1.1.1.0.9 | obsolete | |||||||||||||||||||
| !stpInstanceNewRootTrap | 1.3.6.1.4.1.4413.1.1.1.0.10 | ||||||||||||||||||||
notification · current Trap is sent when this machine is a new STP Root when there is more than one STP instance.
| |||||||||||||||||||||
| !stpInstanceTopologyChangeTrap | 1.3.6.1.4.1.4413.1.1.1.0.11 | ||||||||||||||||||||
notification · current Trap is sent when there is a STP topology change when there is more than one STP instance.
| |||||||||||||||||||||
| !powerSupplyStatusChangeTrap | 1.3.6.1.4.1.4413.1.1.1.0.12 | obsolete | |||||||||||||||||||
| !failedUserLoginTrap | 1.3.6.1.4.1.4413.1.1.1.0.13 | ||||||||||||||||||||
notification · current Trap is sent when a user fails to authenticate via the CLI or Web interfaces. | |||||||||||||||||||||
| !userLockoutTrap | 1.3.6.1.4.1.4413.1.1.1.0.14 | ||||||||||||||||||||
notification · current Trap is sent when a user account is locked due to consecutive failed login attempts via the CLI or Web interfaces beyond the allowed limit. | |||||||||||||||||||||
| !daiIntfErrorDisabledTrap | 1.3.6.1.4.1.4413.1.1.1.0.15 | ||||||||||||||||||||
notification · current Trap is sent once an interface is error disabled by DAI when the incoming packet rate exceeded configured rate limit during a burst-interval.
| |||||||||||||||||||||
| !stpInstanceLoopInconsistentStartTrap | 1.3.6.1.4.1.4413.1.1.1.0.16 | ||||||||||||||||||||
notification · current Trap is sent when this port in this STP instance enters loop inconsistent state upon failure to receive a BPDU.
| |||||||||||||||||||||
| !stpInstanceLoopInconsistentEndTrap | 1.3.6.1.4.1.4413.1.1.1.0.17 | ||||||||||||||||||||
notification · current Trap is sent when this port in this STP instance exits loop inconsistent state upon reception of a BPDU.
| |||||||||||||||||||||
| !dhcpSnoopingIntfErrorDisabledTrap | 1.3.6.1.4.1.4413.1.1.1.0.18 | ||||||||||||||||||||
notification · current Trap is sent once an interface is error disabled by DHCP Snooping when the incoming packet rate exceeded configured rate limit during a burst-interval.
| |||||||||||||||||||||
| !noStartupConfigTrap | 1.3.6.1.4.1.4413.1.1.1.0.19 | ||||||||||||||||||||
notification · current Trap is sent when startup-config file exists and SSH is enabled. | |||||||||||||||||||||
| !agentSwitchIpAddressConflictTrap | 1.3.6.1.4.1.4413.1.1.1.0.20 | ||||||||||||||||||||
notification · current IP address conflict trap signifies the reception of an ARP from another host in the LAN that has conflicting IP address. | |||||||||||||||||||||
| !agentSwitchCpuRisingThresholdTrap | 1.3.6.1.4.1.4413.1.1.1.0.21 | ||||||||||||||||||||
notification · current Trap is sent when the total CPU utilization exceeds CPU Rising utilization threshold over the configured Rising threshold interval. | |||||||||||||||||||||
| !agentSwitchCpuFallingThresholdTrap | 1.3.6.1.4.1.4413.1.1.1.0.22 | ||||||||||||||||||||
notification · current Trap is sent when the total CPU utilization falls below CPU Falling utilization threshold over the configured falling threshold interval. | |||||||||||||||||||||
| !agentSwitchCpuFreeMemBelowThresholdTrap | 1.3.6.1.4.1.4413.1.1.1.0.23 | ||||||||||||||||||||
notification · current Trap is sent when CPU Free Memory falls below the configured threshold. | |||||||||||||||||||||
| !agentSwitchCpuFreeMemAboveThresholdTrap | 1.3.6.1.4.1.4413.1.1.1.0.24 | ||||||||||||||||||||
notification · current Trap is sent when CPU Free Memory rises to 10% above the configured threshold. | |||||||||||||||||||||
| !topologyChangeInitiatedTrap | 1.3.6.1.4.1.4413.1.1.1.0.25 | ||||||||||||||||||||
notification · current Trap is sent once an interface gets a Topology change event on a port.
| |||||||||||||||||||||
| !loopDetectedTrap | 1.3.6.1.4.1.4413.1.1.1.0.26 | ||||||||||||||||||||
| !agentSwitchMbufRisingThresholdTrap | 1.3.6.1.4.1.4413.1.1.1.0.27 | ||||||||||||||||||||
notification · current Trap is sent when the Mbuf utilization exceeds Rising utilization threshold. | |||||||||||||||||||||
| !agentSwitchMbufFallingThresholdTrap | 1.3.6.1.4.1.4413.1.1.1.0.28 | ||||||||||||||||||||
notification · current Trap is sent when the Mbuf utilization falls below Falling utilization threshold. | |||||||||||||||||||||
| NagentInfoGroup | 1.3.6.1.4.1.4413.1.1.1.1 | ||||||||||||||||||||
| NagentInventoryGroup | 1.3.6.1.4.1.4413.1.1.1.1.1 | ||||||||||||||||||||
| SagentInventorySysDescription | 1.3.6.1.4.1.4413.1.1.1.1.1.1 | DisplayString | RO | US-24-250W, 5.43.18.12487, Linux 3.6.5 | |||||||||||||||||
scalar · DisplayString · read-only · current The switch's Inventory system description. Example values from LibreNMS test devices
| |||||||||||||||||||||
| SagentInventoryMachineType | 1.3.6.1.4.1.4413.1.1.1.1.1.2 | DisplayString | RO | US-24-250W | |||||||||||||||||
scalar · DisplayString · read-only · current Type of the Machine used in the Switch Example values from LibreNMS test devices
| |||||||||||||||||||||
| SagentInventoryMachineModel | 1.3.6.1.4.1.4413.1.1.1.1.1.3 | DisplayString | RO | US24P250 | |||||||||||||||||
scalar · DisplayString · read-only · current The switch's Machine Model. Example values from LibreNMS test devices
| |||||||||||||||||||||
| SagentInventorySerialNumber | 1.3.6.1.4.1.4413.1.1.1.1.1.4 | DisplayString | RO | <private> | |||||||||||||||||
scalar · DisplayString · read-only · current Serial number of the switch. Example values from LibreNMS test devices
| |||||||||||||||||||||
| SagentInventoryFRUNumber | 1.3.6.1.4.1.4413.1.1.1.1.1.5 | DisplayString | RO | | |||||||||||||||||
scalar · DisplayString · read-only · current FRU Number of the switch Example values from LibreNMS test devices
| |||||||||||||||||||||
| SagentInventoryMaintenanceLevel | 1.3.6.1.4.1.4413.1.1.1.1.1.6 | DisplayString | RO | A | |||||||||||||||||
scalar · DisplayString · read-only · current The switch's Inventory Maintenance Level Example values from LibreNMS test devices
| |||||||||||||||||||||
| SagentInventoryPartNumber | 1.3.6.1.4.1.4413.1.1.1.1.1.7 | DisplayString | RO | BCM56514 | |||||||||||||||||
scalar · DisplayString · read-only · current The switch's Inventory Part Number Example values from LibreNMS test devices
| |||||||||||||||||||||
| SagentInventoryManufacturer | 1.3.6.1.4.1.4413.1.1.1.1.1.8 | DisplayString | RO | 0xbc00 | |||||||||||||||||
scalar · DisplayString · read-only · current Name of the Manufacturer of this unit Example values from LibreNMS test devices
| |||||||||||||||||||||
| SagentInventoryBurnedInMacAddress | 1.3.6.1.4.1.4413.1.1.1.1.1.9 | PhysAddress | RO | 60:eb:69:3e:89:1c | |||||||||||||||||
scalar · PhysAddress · read-only · current Burned-In MAC Address Example values from LibreNMS test devices
| |||||||||||||||||||||
| SagentInventoryOperatingSystem | 1.3.6.1.4.1.4413.1.1.1.1.1.10 | DisplayString | RO | VxWorks 6.6 | |||||||||||||||||
scalar · DisplayString · read-only · current Operating System running on this unit Example values from LibreNMS test devices
| |||||||||||||||||||||
| SagentInventoryNetworkProcessingDevice | 1.3.6.1.4.1.4413.1.1.1.1.1.11 | DisplayString | RO | BCM56514_A0 | |||||||||||||||||
scalar · DisplayString · read-only · current Network Processing Device for this unit Example values from LibreNMS test devices
| |||||||||||||||||||||
| SagentInventoryAdditionalPackages | 1.3.6.1.4.1.4413.1.1.1.1.1.12 | DisplayString | RO | QOS | |||||||||||||||||
scalar · DisplayString · read-only · current Lists additional functional packages available on this unit. Example values from LibreNMS test devices
| |||||||||||||||||||||
| SagentInventorySoftwareVersion | 1.3.6.1.4.1.4413.1.1.1.1.1.13 | DisplayString | RO | 1.1.0.8 | |||||||||||||||||
scalar · DisplayString · read-only · current Lists the version of software loaded on this unit. Example values from LibreNMS test devices
| |||||||||||||||||||||
| SagentInventoryHardwareVersion | 1.3.6.1.4.1.4413.1.1.1.1.1.14 | DisplayString | RO | ||||||||||||||||||
scalar · DisplayString · read-only · current Lists the version of hardware of this unit. This is a platform dependant string. | |||||||||||||||||||||
| NagentTrapLogGroup | 1.3.6.1.4.1.4413.1.1.1.1.2 | ||||||||||||||||||||
| SagentTrapLogTotal | 1.3.6.1.4.1.4413.1.1.1.1.2.1 | Integer32 | RO | ||||||||||||||||||
scalar · Integer32 · read-only · current The total number of traps sent since last reset. | |||||||||||||||||||||
| SagentTrapLogTotalSinceLastViewed | 1.3.6.1.4.1.4413.1.1.1.1.2.3 | Integer32 | RO | ||||||||||||||||||
scalar · Integer32 · read-only · current The number of traps sent since last viewed. | |||||||||||||||||||||
| TagentTrapLogTable | 1.3.6.1.4.1.4413.1.1.1.1.2.4 | NA | |||||||||||||||||||
table · not-accessible · current Agent Trap Log | |||||||||||||||||||||
| RagentTrapLogEntry | 1.3.6.1.4.1.4413.1.1.1.1.2.4.1 | NA | |||||||||||||||||||
| CagentTrapLogIndex | 1.3.6.1.4.1.4413.1.1.1.1.2.4.1.1 | Integer32 (0..2147483647) | RO | ||||||||||||||||||
column · Integer32 (0..2147483647) · read-only · current Unique index of trap entry | |||||||||||||||||||||
| CagentTrapLogSystemTime | 1.3.6.1.4.1.4413.1.1.1.1.2.4.1.2 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current System uptime when trap was sent. This entry shows how long the system has been up when the trap occurred. | |||||||||||||||||||||
| CagentTrapLogTrap | 1.3.6.1.4.1.4413.1.1.1.1.2.4.1.3 | DisplayString (SIZE (0..512)) | RO | ||||||||||||||||||
column · DisplayString (SIZE (0..512)) · read-only · current Description of the trap sent. | |||||||||||||||||||||
| TagentSupportedMibTable | 1.3.6.1.4.1.4413.1.1.1.1.3 | NA | |||||||||||||||||||
table · not-accessible · current Supported MIB table | |||||||||||||||||||||
| RagentSupportedMibEntry | 1.3.6.1.4.1.4413.1.1.1.1.3.1 | NA | |||||||||||||||||||
| CagentSupportedMibIndex | 1.3.6.1.4.1.4413.1.1.1.1.3.1.1 | Integer32 (0..2147483647) | RO | ||||||||||||||||||
column · Integer32 (0..2147483647) · read-only · current Unique index of the Supported MIB entry | |||||||||||||||||||||
| CagentSupportedMibName | 1.3.6.1.4.1.4413.1.1.1.1.3.1.2 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current The name of the MIB (RFC or IEEE) that is supported. | |||||||||||||||||||||
| CagentSupportedMibDescription | 1.3.6.1.4.1.4413.1.1.1.1.3.1.3 | DisplayString (SIZE (0..512)) | RO | ||||||||||||||||||
column · DisplayString (SIZE (0..512)) · read-only · current Description of the MIB (RFC or IEEE) that is supported. | |||||||||||||||||||||
| NagentSwitchCpuProcessGroup | 1.3.6.1.4.1.4413.1.1.1.1.4 | ||||||||||||||||||||
| SagentSwitchCpuProcessMemFree | 1.3.6.1.4.1.4413.1.1.1.1.4.1 | Integer32 | RO | 85068 | |||||||||||||||||
scalar · Integer32 · read-only · current The total memory free for utilization in KBytes.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| SagentSwitchCpuProcessMemAvailable | 1.3.6.1.4.1.4413.1.1.1.1.4.2 | Integer32 | RO | 256404 | |||||||||||||||||
scalar · Integer32 · read-only · current The total memory available in KBytes.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| SagentSwitchCpuProcessRisingThreshold | 1.3.6.1.4.1.4413.1.1.1.1.4.3 | Unsigned32 (0..100) | RW | 0 | |||||||||||||||||
scalar · Unsigned32 (0..100) · read-write · current The CPU Rising utilization threshold in percentage. A zero percent threshold indicates CPU Utilization Notification feature is disabled. A notification is triggered when the total CPU utilization exceeds this threshold over the configured Rising threshold interval. If the Rising threshold is configured to be less than the Falling threshold, the Falling threshold is set equal to the Rising threshold. Example values from LibreNMS test devices
| |||||||||||||||||||||
| SagentSwitchCpuProcessRisingThresholdInterval | 1.3.6.1.4.1.4413.1.1.1.1.4.4 | Unsigned32 (0 | 5..86400) | RW | 0 | |||||||||||||||||
scalar · Unsigned32 (0 | 5..86400) · read-write · current The CPU Rising threshold interval in seconds. The time interval is configured in multiples of 5 seconds. A zero Rising interval indicates CPU Utilization Notification feature is disabled. Example values from LibreNMS test devices
| |||||||||||||||||||||
| SagentSwitchCpuProcessFallingThreshold | 1.3.6.1.4.1.4413.1.1.1.1.4.5 | Unsigned32 (0..100) | RW | 0 | |||||||||||||||||
scalar · Unsigned32 (0..100) · read-write · current The CPU Falling utilization threshold in percentage. Configuration of this object value is optional. Value '0' is not allowed for configuration, if the Rising threshold is non-zero. If the Falling threshold is configured to be greater than the Rising threshold, the Rising threshold is set equal to the Falling threshold. If the Falling threshold is not configured, it takes the same value as the Rising threshold. A notification is triggered when the total CPU utilization falls below this threshold over the configured Falling threshold interval. Example values from LibreNMS test devices
| |||||||||||||||||||||
| SagentSwitchCpuProcessFallingThresholdInterval | 1.3.6.1.4.1.4413.1.1.1.1.4.6 | Unsigned32 (0 | 5..86400) | RW | 0 | |||||||||||||||||
scalar · Unsigned32 (0 | 5..86400) · read-write · current The CPU Falling threshold interval in seconds. Configuration of this object value is optional. Value '0' is not allowed for configuration, if the Rising interval is non-zero. If the Falling interval is not configured, it takes the same value as the Rising interval. The time interval is configured in multiples of 5 seconds. Example values from LibreNMS test devices
| |||||||||||||||||||||
| SagentSwitchCpuProcessFreeMemoryThreshold | 1.3.6.1.4.1.4413.1.1.1.1.4.7 | Unsigned32 | RW | 0 | |||||||||||||||||
scalar · Unsigned32 · read-write · current The CPU Free Memory threshold in kilobytes. A zero threshold value indicates the CPU Free Memory Notification feature is disabled. Notifications are triggered when the CPU Free Memory falls below the configured threshold and when it rises to 10% above the configured threshold. Example values from LibreNMS test devices
| |||||||||||||||||||||
| TagentSwitchCpuProcessTable | 1.3.6.1.4.1.4413.1.1.1.1.4.8 | NA | |||||||||||||||||||
table · not-accessible · current A table of Task and cpu utilization. | |||||||||||||||||||||
| RagentSwitchCpuProcessEntry | 1.3.6.1.4.1.4413.1.1.1.1.4.8.1 | NA | |||||||||||||||||||
| CagentSwitchCpuProcessIndex | 1.3.6.1.4.1.4413.1.1.1.1.4.8.1.1 | Integer32 (0..2147483647) | NA | ||||||||||||||||||
column · Integer32 (0..2147483647) · not-accessible · current Unique index of process table | |||||||||||||||||||||
| CagentSwitchCpuProcessName | 1.3.6.1.4.1.4413.1.1.1.1.4.8.1.2 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current Name of the process | |||||||||||||||||||||
| CagentSwitchCpuProcessPercentageUtilization | 1.3.6.1.4.1.4413.1.1.1.1.4.8.1.3 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current CPU utilization per task in Percentage over a period of 5, 60, 300 seconds, and the Rising threshold period also in seconds, if configured. | |||||||||||||||||||||
| CagentSwitchCpuProcessId | 1.3.6.1.4.1.4413.1.1.1.1.4.8.1.4 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current Process ID | |||||||||||||||||||||
| SagentSwitchCpuProcessTotalUtilization | 1.3.6.1.4.1.4413.1.1.1.1.4.9 | DisplayString | RO | 5 Secs ( 96.4918%) 60 Secs ( 54.2271%) 3… | |||||||||||||||||
scalar · DisplayString · read-only · current Total CPU utilization over a period of 5, 60, 300 seconds, and the Rising threshold period also in seconds, if configured. Example values from LibreNMS test devices
| |||||||||||||||||||||
| NagentSwitchCpuCosQDropGroup | 1.3.6.1.4.1.4413.1.1.1.1.6 | ||||||||||||||||||||
| TagentSwitchCpuCosQDropTable | 1.3.6.1.4.1.4413.1.1.1.1.6.1 | NA | |||||||||||||||||||
table · not-accessible · current Table lists the number of packets dropped at each CoS queue for the CPU. | |||||||||||||||||||||
| RagentSwitchCpuCosQDropEntry | 1.3.6.1.4.1.4413.1.1.1.1.6.1.1 | NA | |||||||||||||||||||
row · not-accessible · current Packet drop statistics for a CPU CoS queue. | |||||||||||||||||||||
| CagentSwitchCpuCosQIndex | 1.3.6.1.4.1.4413.1.1.1.1.6.1.1.1 | Unsigned32 | NA | ||||||||||||||||||
column · Unsigned32 · not-accessible · current Unique index of a CPU CoS queue. | |||||||||||||||||||||
| CagentSwitchCpuCosQDrops | 1.3.6.1.4.1.4413.1.1.1.1.6.1.1.2 | Counter32 | RO | ||||||||||||||||||
column · Counter32 · read-only · current Number of packets dropped at this CPU CoS queue because the queue was full. | |||||||||||||||||||||
| NagentSwitchMbufGroup | 1.3.6.1.4.1.4413.1.1.1.1.7 | ||||||||||||||||||||
| SagentSwitchMbufsFree | 1.3.6.1.4.1.4413.1.1.1.1.7.1 | Gauge32 | RO | ||||||||||||||||||
scalar · Gauge32 · read-only · current Number of message buffers currently available. | |||||||||||||||||||||
| TagentSwitchMbufTable | 1.3.6.1.4.1.4413.1.1.1.1.7.2 | NA | |||||||||||||||||||
table · not-accessible · current Table lists information about message buffer allocation for packets arriving at the CPU. | |||||||||||||||||||||
| RagentSwitchMbufEntry | 1.3.6.1.4.1.4413.1.1.1.1.7.2.1 | NA | |||||||||||||||||||
row · not-accessible · current Information on a specific class of message buffers.
| |||||||||||||||||||||
| CagentSwitchMbufPrio | 1.3.6.1.4.1.4413.1.1.1.1.7.2.1.1 | Unsigned32 | NA | ||||||||||||||||||
column · Unsigned32 · not-accessible · current Message buffer priority. | |||||||||||||||||||||
| CagentSwitchMbufClassName | 1.3.6.1.4.1.4413.1.1.1.1.7.2.1.2 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current Name of this class of message buffer. | |||||||||||||||||||||
| CagentSwitchMbufAllocAttempts | 1.3.6.1.4.1.4413.1.1.1.1.7.2.1.3 | Counter32 | RO | ||||||||||||||||||
column · Counter32 · read-only · current Number of times the system tried to allocate a message buffer allocation of this class. | |||||||||||||||||||||
| CagentSwitchMbufAllocFails | 1.3.6.1.4.1.4413.1.1.1.1.7.2.1.4 | Counter32 | RO | ||||||||||||||||||
column · Counter32 · read-only · current Number of message buffer allocation failures for this class of message buffer. | |||||||||||||||||||||
| SagentSwitchMbufsTotal | 1.3.6.1.4.1.4413.1.1.1.1.7.3 | Counter32 | RO | ||||||||||||||||||
scalar · Counter32 · read-only · current Total number of message buffers in the system. | |||||||||||||||||||||
| SagentSwitchMbufsUsed | 1.3.6.1.4.1.4413.1.1.1.1.7.4 | Counter32 | RO | ||||||||||||||||||
scalar · Counter32 · read-only · current Number of message buffers currently in use. | |||||||||||||||||||||
| NagentConfigGroup | 1.3.6.1.4.1.4413.1.1.1.2 | ||||||||||||||||||||
| NagentCLIConfigGroup | 1.3.6.1.4.1.4413.1.1.1.2.1 | ||||||||||||||||||||
| TagentLoginSessionTable | 1.3.6.1.4.1.4413.1.1.1.2.1.1 | NA | |||||||||||||||||||
table · not-accessible · current A table of the switch's login session | |||||||||||||||||||||
| RagentLoginSessionEntry | 1.3.6.1.4.1.4413.1.1.1.2.1.1.1 | NA | |||||||||||||||||||
| CagentLoginSessionIndex | 1.3.6.1.4.1.4413.1.1.1.2.1.1.1.1 | Integer32 (0..2147483647) | RO | ||||||||||||||||||
column · Integer32 (0..2147483647) · read-only · current Agent Login Session Index of the switch | |||||||||||||||||||||
| CagentLoginSessionUserName | 1.3.6.1.4.1.4413.1.1.1.2.1.1.1.2 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current Agent Login Session UserName of the switch | |||||||||||||||||||||
| CagentLoginSessionIPAddress | 1.3.6.1.4.1.4413.1.1.1.2.1.1.1.3 | IpAddress | RO | obsolete | |||||||||||||||||
column · IpAddress · read-only · obsolete Agent Login Session IP Address of the switch | |||||||||||||||||||||
| CagentLoginSessionConnectionType | 1.3.6.1.4.1.4413.1.1.1.2.1.1.1.4 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Agent Login Session Connection Type of the switch
| |||||||||||||||||||||
| CagentLoginSessionIdleTime | 1.3.6.1.4.1.4413.1.1.1.2.1.1.1.5 | TimeTicks | RO | ||||||||||||||||||
column · TimeTicks · read-only · current Agent Login Session Idle Time of the switch | |||||||||||||||||||||
| CagentLoginSessionSessionTime | 1.3.6.1.4.1.4413.1.1.1.2.1.1.1.6 | TimeTicks | RO | ||||||||||||||||||
column · TimeTicks · read-only · current Agent Login Session Time of the switch | |||||||||||||||||||||
| CagentLoginSessionStatus | 1.3.6.1.4.1.4413.1.1.1.2.1.1.1.7 | RowStatus | RW | ||||||||||||||||||
column · RowStatus · read-write · current Status of the user. active(1) - This connection is active. destroy(6) - Set to this value to disconnect this user. | |||||||||||||||||||||
| CagentLoginSessionInetAddressType | 1.3.6.1.4.1.4413.1.1.1.2.1.1.1.8 | InetAddressType | RO | ||||||||||||||||||
column · InetAddressType · read-only · current Type of address agentLoginSessionInetAddress is returning. Can be either unknown(0), ipv4(1), or ipv6 (2). Will return unknown(0) in the case of a serial login. | |||||||||||||||||||||
| CagentLoginSessionInetAddress | 1.3.6.1.4.1.4413.1.1.1.2.1.1.1.9 | InetAddress | RO | ||||||||||||||||||
column · InetAddress · read-only · current Inet Address of the connecting the user is logging in with. Will return a zero-length string in the case of a serial login. | |||||||||||||||||||||
| NagentTelnetConfigGroup | 1.3.6.1.4.1.4413.1.1.1.2.1.2 | ||||||||||||||||||||
| SagentTelnetLoginTimeout | 1.3.6.1.4.1.4413.1.1.1.2.1.2.1 | Integer32 (1..160) | RW | ||||||||||||||||||
scalar · Integer32 (1..160) · read-write · current Telnet login timeout (minutes) Config telnet timeout will set the telnet session timeout value. A session is active as long as the session has not remained idle for the value set. Specify a value from 1 to 160. Note: Changing the timeout value for active sessions does not become effective until the session is reaccessed. Any keystroke will also activate the new timeout duration. | |||||||||||||||||||||
| SagentTelnetMaxSessions | 1.3.6.1.4.1.4413.1.1.1.2.1.2.2 | Integer32 | RW | ||||||||||||||||||
scalar · Integer32 · read-write · current Maximum number of Telnet Sessions Config telnet maxsessions is an integer value that specifies the maximum number of telnet sessions that can be established. If the value is 0, no Telnet session can be established. | |||||||||||||||||||||
| SagentTelnetAllowNewMode | 1.3.6.1.4.1.4413.1.1.1.2.1.2.3 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current Allow new telnet sessions (enable or disable) Config telnet disable means that no new Telnet sessions are to be established. Any already established session remains active until the session is ended or an abnormal network error ends it.
| |||||||||||||||||||||
| SagentTelnetMgmtPortNum | 1.3.6.1.4.1.4413.1.1.1.2.1.2.4 | Integer32 (1..65535) | RW | ||||||||||||||||||
scalar · Integer32 (1..65535) · read-write · current Get/Set the TCP port number that the telnet server listens to for incoming requests. The port number is an integer value from 1 to 65535. Before setting this object, check your system (e.g. using 'netstat') to make sure the desired port number is not currently being used by any other service. The default value for this object is 23. Note that existing telnet login sessions are not affected by a change in value of this object, although establishment of any new telnet sessions must use the new port number. | |||||||||||||||||||||
| NagentUserConfigGroup | 1.3.6.1.4.1.4413.1.1.1.2.1.3 | ||||||||||||||||||||
| SagentUserConfigCreate | 1.3.6.1.4.1.4413.1.1.1.2.1.3.1 | DisplayString (SIZE (1..64)) | RW | ||||||||||||||||||
scalar · DisplayString (SIZE (1..64)) · read-write · current Create a new user. When set with a non-empty string, a new user with that name will be created. This object will only return an empty string. This string is limited to alpha-numeric strings (uncluding the '-' and '_' characters). | |||||||||||||||||||||
| TagentUserConfigTable | 1.3.6.1.4.1.4413.1.1.1.2.1.3.2 | NA | |||||||||||||||||||
table · not-accessible · current User Config Table | |||||||||||||||||||||
| RagentUserConfigEntry | 1.3.6.1.4.1.4413.1.1.1.2.1.3.2.1 | NA | |||||||||||||||||||
| CagentUserIndex | 1.3.6.1.4.1.4413.1.1.1.2.1.3.2.1.1 | Integer32 (0..2147483647) | NA | ||||||||||||||||||
column · Integer32 (0..2147483647) · not-accessible · current Agent User Config Index | |||||||||||||||||||||
| CagentUserName | 1.3.6.1.4.1.4413.1.1.1.2.1.3.2.1.2 | DisplayString (SIZE (1..64)) | RW | ||||||||||||||||||
column · DisplayString (SIZE (1..64)) · read-write · current Agent User Name. This string is limited to alpha-numeric strings (including the '-' and '_' characters). | |||||||||||||||||||||
| CagentUserPassword | 1.3.6.1.4.1.4413.1.1.1.2.1.3.2.1.3 | DisplayString (SIZE (0..64)) | RW | ||||||||||||||||||
column · DisplayString (SIZE (0..64)) · read-write · current Agent User Password This object will return an empty string even if a password is set. | |||||||||||||||||||||
| CagentUserAccessMode | 1.3.6.1.4.1.4413.1.1.1.2.1.3.2.1.4 | INTEGER | RW | deprecated | |||||||||||||||||
column · INTEGER · read-write · deprecated Agent User Access Mode. This object is deprecated in favor of agentUserAccessLevel.
| |||||||||||||||||||||
| CagentUserStatus | 1.3.6.1.4.1.4413.1.1.1.2.1.3.2.1.5 | RowStatus | RW | ||||||||||||||||||
column · RowStatus · read-write · current Agent User Status. active(1) - This user account is active. destroy(6) - Set to this value to remove this user account. | |||||||||||||||||||||
| CagentUserAuthenticationType | 1.3.6.1.4.1.4413.1.1.1.2.1.3.2.1.6 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current SNMPv3 User Authentication. The user passsword must be set to a string greater than or equal to 8 characters for this to be set to anything but none(1). none(1) - no authentication used hmacmd5(1) - Use HMAC-MD5 authentication hmacsha(1) - Use HMAC-SHA authentication
| |||||||||||||||||||||
| CagentUserEncryptionType | 1.3.6.1.4.1.4413.1.1.1.2.1.3.2.1.7 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current SNMPv3 User Encryption Can not be set to des(2) if agentUserAuthenticationType is set to none(1). none(1) - no encryption used des(2) - DES encryption used
| |||||||||||||||||||||
| CagentUserEncryptionPassword | 1.3.6.1.4.1.4413.1.1.1.2.1.3.2.1.8 | DisplayString (SIZE (8..64)) | RW | ||||||||||||||||||
column · DisplayString (SIZE (8..64)) · read-write · current SNMPv3 User Encryption Password This object will return an empty string even if a password is set. agentUserEncryptionType must be set to des(2) before this object can be configured. This object will return an empty string even if a password is set. | |||||||||||||||||||||
| CagentUserLockoutStatus | 1.3.6.1.4.1.4413.1.1.1.2.1.3.2.1.9 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Displays whether the user account is locked due to excessive failed login attempts.
| |||||||||||||||||||||
| CagentUserPasswordExpireTime | 1.3.6.1.4.1.4413.1.1.1.2.1.3.2.1.10 | DateAndTime | RO | ||||||||||||||||||
column · DateAndTime · read-only · current Date and time when the user's password expires (past or present). Only valid when password aging is enabled. | |||||||||||||||||||||
| CagentUserAccessLevel | 1.3.6.1.4.1.4413.1.1.1.2.1.3.2.1.11 | INTEGER (0..15) | RW | ||||||||||||||||||
column · INTEGER (0..15) · read-write · current Agent User Access Level. Supported values are 0, 1 and 15. | |||||||||||||||||||||
| NagentSerialGroup | 1.3.6.1.4.1.4413.1.1.1.2.1.5 | ||||||||||||||||||||
| SagentSerialTimeout | 1.3.6.1.4.1.4413.1.1.1.2.1.5.1 | Integer32 (0..160) | RW | ||||||||||||||||||
scalar · Integer32 (0..160) · read-write · current agentSerialTimeout specifies the maximum connect time(in minutes) without console activity. A value of 0 indicates that a console can be connected indefinitely. The time range is 0 to 160. | |||||||||||||||||||||
| SagentSerialBaudrate | 1.3.6.1.4.1.4413.1.1.1.2.1.5.2 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current agentSerialBaudrate specifies the current baud rate at which the serial port will try to connect. The available values are 1200, 2400, 4800, 9600, 19200, 38400,57600, and 115200 baud.
| |||||||||||||||||||||
| SagentSerialCharacterSize | 1.3.6.1.4.1.4413.1.1.1.2.1.5.3 | Integer32 | RO | ||||||||||||||||||
scalar · Integer32 · read-only · current agentSerialCharacterSize specifies the number of bits in a character. The number of bits is always 8. | |||||||||||||||||||||
| SagentSerialHWFlowControlMode | 1.3.6.1.4.1.4413.1.1.1.2.1.5.4 | INTEGER | RO | ||||||||||||||||||
scalar · INTEGER · read-only · current agentSerialHardwareFlowControl specifies whether hardware flow-control is enabled or disabled. Hardware Flow Control is always disabled.
| |||||||||||||||||||||
| SagentSerialStopBits | 1.3.6.1.4.1.4413.1.1.1.2.1.5.5 | Integer32 | RO | ||||||||||||||||||
scalar · Integer32 · read-only · current agentSerialStopBits specifies the number of Stop bits per character. The number of Stop bits is always 1. | |||||||||||||||||||||
| SagentSerialParityType | 1.3.6.1.4.1.4413.1.1.1.2.1.5.6 | INTEGER | RO | ||||||||||||||||||
scalar · INTEGER · read-only · current agentSerialParityType specifies the Parity Method used on the Serial Port. The Parity Method is always None.
| |||||||||||||||||||||
| NagentPasswordManagementConfigGroup | 1.3.6.1.4.1.4413.1.1.1.2.1.6 | ||||||||||||||||||||
| SagentPasswordManagementMinLength | 1.3.6.1.4.1.4413.1.1.1.2.1.6.1 | Integer32 (0 | 8..64) | RW | ||||||||||||||||||
scalar · Integer32 (0 | 8..64) · read-write · current Minimum length for user passwords All new local user passwords must be at least this many characters in length. | |||||||||||||||||||||
| SagentPasswordManagementHistory | 1.3.6.1.4.1.4413.1.1.1.2.1.6.2 | Integer32 (0..10) | RW | ||||||||||||||||||
scalar · Integer32 (0..10) · read-write · current The number of previous passwords to store for prevention of password reuse. This ensures that each user does not reuse passwords often. A value of 0 indicates that no previous passwords will be stored. | |||||||||||||||||||||
| SagentPasswordManagementAging | 1.3.6.1.4.1.4413.1.1.1.2.1.6.3 | Integer32 (0..365) | RW | ||||||||||||||||||
scalar · Integer32 (0..365) · read-write · current The maximum time that user passwords are valid, in days, from the time the password is set. Once a password expires, the user will be required to enter a new password following the first login after password expiration. A value of 0 indicates that passwords never expire. | |||||||||||||||||||||
| SagentPasswordManagementLockAttempts | 1.3.6.1.4.1.4413.1.1.1.2.1.6.4 | Integer32 (0..5) | RW | ||||||||||||||||||
scalar · Integer32 (0..5) · read-write · current The number of allowable failed local authentication attempts before the user's account is locked. A value of 0 indicates that user accounts will never be locked. | |||||||||||||||||||||
| SagentPasswordManagementPasswordStrengthCheck | 1.3.6.1.4.1.4413.1.1.1.2.1.6.5 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current Configures Password Strength Check feature.
| |||||||||||||||||||||
| SagentPasswordManagementStrengthMinUpperCase | 1.3.6.1.4.1.4413.1.1.1.2.1.6.6 | Integer32 (0..16) | RW | ||||||||||||||||||
scalar · Integer32 (0..16) · read-write · current The number of minimum allowable uppercase letters in a password. Minimum of 0 means no restriction on that set of characters. | |||||||||||||||||||||
| SagentPasswordManagementStrengthMinLowerCase | 1.3.6.1.4.1.4413.1.1.1.2.1.6.7 | Integer32 (0..16) | RW | ||||||||||||||||||
scalar · Integer32 (0..16) · read-write · current The number of minimum allowable lowercase letters in a password. Minimum of 0 means no restriction on that set of characters. | |||||||||||||||||||||
| SagentPasswordManagementStrengthMinNumericNumbers | 1.3.6.1.4.1.4413.1.1.1.2.1.6.8 | Integer32 (0..16) | RW | ||||||||||||||||||
scalar · Integer32 (0..16) · read-write · current The number of minimum allowable numeric numbers in a password. Minimum of 0 means no restriction on that set of characters. | |||||||||||||||||||||
| SagentPasswordManagementStrengthMinSpecialCharacters | 1.3.6.1.4.1.4413.1.1.1.2.1.6.9 | Integer32 (0..16) | RW | ||||||||||||||||||
scalar · Integer32 (0..16) · read-write · current The number of minimum allowable special characters in a password. Minimum of 0 means no restriction on that set of characters. | |||||||||||||||||||||
| SagentPasswordManagementStrengthMaxConsecutiveCharacters | 1.3.6.1.4.1.4413.1.1.1.2.1.6.10 | Integer32 (0..15) | RW | ||||||||||||||||||
scalar · Integer32 (0..15) · read-write · current The number of maximum consecutive characters can be present in a password. Maximum of 0 means disabling the restriction. | |||||||||||||||||||||
| SagentPasswordManagementStrengthMaxRepeatedCharacters | 1.3.6.1.4.1.4413.1.1.1.2.1.6.11 | Integer32 (0..15) | RW | ||||||||||||||||||
scalar · Integer32 (0..15) · read-write · current The number of maximum repeated characters can be present in a password. Maximum of 0 means disabling the restriction. | |||||||||||||||||||||
| SagentPasswordManagementStrengthMinCharacterClasses | 1.3.6.1.4.1.4413.1.1.1.2.1.6.12 | Integer32 (0..4) | RW | ||||||||||||||||||
scalar · Integer32 (0..4) · read-write · current The number of minimum allowable character classes in a password. Minimum of 0 means no restriction on that set of characters. | |||||||||||||||||||||
| SagentPasswordMgmtLastPasswordSetResult | 1.3.6.1.4.1.4413.1.1.1.2.1.6.14 | DisplayString | RO | ||||||||||||||||||
scalar · DisplayString · read-only · current Retrieves the last password set Result. | |||||||||||||||||||||
| TagentPasswordManagementStrengthExcludeKeywordTable | 1.3.6.1.4.1.4413.1.1.1.2.1.6.15 | NA | |||||||||||||||||||
table · not-accessible · current Represents Password strength restricted keywords from the configurable password. | |||||||||||||||||||||
| RagentPasswordManagementStrengthExcludeKeywordEntry | 1.3.6.1.4.1.4413.1.1.1.2.1.6.15.1 | NA | |||||||||||||||||||
row · not-accessible · current Represents Password strength restricted keywords from the configurable password. | |||||||||||||||||||||
| CagentPasswordMgmtStrengthExcludeKeyword | 1.3.6.1.4.1.4413.1.1.1.2.1.6.15.1.1 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current Specifies the given keyword string restricted from the configurable password. | |||||||||||||||||||||
| CagentPasswordMgmtStrengthExcludeKeywordStatus | 1.3.6.1.4.1.4413.1.1.1.2.1.6.15.1.2 | RowStatus | RC | ||||||||||||||||||
column · RowStatus · read-create · current Create the Exclude Keyword Index and configure (Create or Destroy) the keyword to it. | |||||||||||||||||||||
| NagentIASUserConfigGroup | 1.3.6.1.4.1.4413.1.1.1.2.1.7 | ||||||||||||||||||||
| SagentIASUserConfigCreate | 1.3.6.1.4.1.4413.1.1.1.2.1.7.1 | DisplayString (SIZE (1..64)) | RW | ||||||||||||||||||
scalar · DisplayString (SIZE (1..64)) · read-write · current Create a new user. When set with a non-empty string, a new user with that name will be created. This object will only return an empty string. This string is limited to alpha-numeric strings (including the '-' and '_' characters). | |||||||||||||||||||||
| TagentIASUserConfigTable | 1.3.6.1.4.1.4413.1.1.1.2.1.7.2 | NA | |||||||||||||||||||
table · not-accessible · current A table for dot1x Client details and associated functionality. | |||||||||||||||||||||
| RagentIASUserConfigEntry | 1.3.6.1.4.1.4413.1.1.1.2.1.7.2.1 | NA | |||||||||||||||||||
| CagentIASUserIndex | 1.3.6.1.4.1.4413.1.1.1.2.1.7.2.1.1 | Integer32 (0..99) | NA | ||||||||||||||||||
column · Integer32 (0..99) · not-accessible · current IAS user config index. | |||||||||||||||||||||
| CagentIASUserName | 1.3.6.1.4.1.4413.1.1.1.2.1.7.2.1.2 | DisplayString (SIZE (1..64)) | RW | ||||||||||||||||||
column · DisplayString (SIZE (1..64)) · read-write · current IAS user name. This string is limited to alpha-numeric strings (including '-' and '_' characters). | |||||||||||||||||||||
| CagentIASUserPassword | 1.3.6.1.4.1.4413.1.1.1.2.1.7.2.1.3 | DisplayString (SIZE (0..64)) | RW | ||||||||||||||||||
column · DisplayString (SIZE (0..64)) · read-write · current IAS user password. | |||||||||||||||||||||
| CagentIASUserStatus | 1.3.6.1.4.1.4413.1.1.1.2.1.7.2.1.4 | RowStatus | RW | ||||||||||||||||||
column · RowStatus · read-write · current IAS User Status. active(1) - This user account is active. destroy(6) - Set to this value to remove this user account. | |||||||||||||||||||||
| NagentCLIBannerMsgConfigGroup | 1.3.6.1.4.1.4413.1.1.1.2.1.8 | ||||||||||||||||||||
| SagentCLIBannerMessage | 1.3.6.1.4.1.4413.1.1.1.2.1.8.1 | OCTET STRING | RW | ||||||||||||||||||
scalar · OCTET STRING · read-write · current Banner message string. To enter the banner message in multiple lines, separate each line by '\r\n'. The maximum printable characters is limited to 2000 characters. | |||||||||||||||||||||
| NagentLagConfigGroup | 1.3.6.1.4.1.4413.1.1.1.2.2 | ||||||||||||||||||||
| SagentLagConfigCreate | 1.3.6.1.4.1.4413.1.1.1.2.2.1 | DisplayString (SIZE (0 | 1..15)) | RO | ||||||||||||||||||
scalar · DisplayString (SIZE (0 | 1..15)) · read-only · current Agent LAG Create. When this object is set with a non-empty string, a new LAG will be created if possible, with the entered string as its name. Get operation on this MIB object returns a null-value, as for the purpose of viewing the LAG name, the user should perform the traversal of agentLagSummaryConfigTable. For this reason the get operation on this object agentLagConfigCreate becomes insignificant. | |||||||||||||||||||||
| TagentLagSummaryConfigTable | 1.3.6.1.4.1.4413.1.1.1.2.2.2 | NA | |||||||||||||||||||
table · not-accessible · current A summary table of the switch's LAG config entries | |||||||||||||||||||||
| RagentLagSummaryConfigEntry | 1.3.6.1.4.1.4413.1.1.1.2.2.2.1 | NA | |||||||||||||||||||
| CagentLagSummaryLagIndex | 1.3.6.1.4.1.4413.1.1.1.2.2.2.1.1 | Integer32 (0..2147483647) | RO | ||||||||||||||||||
column · Integer32 (0..2147483647) · read-only · current Agent LAG IfIndex. This value corresponds with the LAG interface in the ifTable. | |||||||||||||||||||||
| CagentLagSummaryName | 1.3.6.1.4.1.4413.1.1.1.2.2.2.1.2 | DisplayString (SIZE (1..15)) | RW | ||||||||||||||||||
column · DisplayString (SIZE (1..15)) · read-write · current Agent LAG Name. The associated name of the LAG used during creation. Duplicate names are not allowed. | |||||||||||||||||||||
| CagentLagSummaryFlushTimer | 1.3.6.1.4.1.4413.1.1.1.2.2.2.1.3 | Integer32 | RW | obsolete | |||||||||||||||||
column · Integer32 · read-write · obsolete Agent LAG FlushTimer. | |||||||||||||||||||||
| CagentLagSummaryLinkTrap | 1.3.6.1.4.1.4413.1.1.1.2.2.2.1.4 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current Agent LAG LinkTrap. Configures sending Link Up/Down traps when the LAG interface goes Up or Down.
| |||||||||||||||||||||
| CagentLagSummaryAdminMode | 1.3.6.1.4.1.4413.1.1.1.2.2.2.1.5 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current Agent LAG AdminMode. Administratively enables or disables this LAG interface.
| |||||||||||||||||||||
| CagentLagSummaryStpMode | 1.3.6.1.4.1.4413.1.1.1.2.2.2.1.6 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current Agent LAG StpMode Administratively enables or disables STP on this interface.
| |||||||||||||||||||||
| CagentLagSummaryAddPort | 1.3.6.1.4.1.4413.1.1.1.2.2.2.1.7 | Integer32 | RW | ||||||||||||||||||
column · Integer32 · read-write · current Agent LAG AddPort. Set to a non 0 value to add a port to the LAG. Values correspond to ifIndex values in the ifTable. Note: agentPortType for the port to be added must be full duplex and the same speed as previously added port(s), if any. | |||||||||||||||||||||
| CagentLagSummaryDeletePort | 1.3.6.1.4.1.4413.1.1.1.2.2.2.1.8 | Integer32 | RW | ||||||||||||||||||
column · Integer32 · read-write · current Agent LAG DeletePort. Set to a non 0 value to remove a port from the LAG. Values correspond to ifIndex values in the ifTable. | |||||||||||||||||||||
| CagentLagSummaryStatus | 1.3.6.1.4.1.4413.1.1.1.2.2.2.1.9 | RowStatus | RW | ||||||||||||||||||
column · RowStatus · read-write · current Agent LAG Status. active(1) - This LAG is enabled. destroy(6) - Set to this value to remove the LAG. | |||||||||||||||||||||
| CagentLagSummaryType | 1.3.6.1.4.1.4413.1.1.1.2.2.2.1.10 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Agent LAG Type. static(1) - This LAG is staticly maintained. dynamic(2) - This LAG is dynamicly maintained.
| |||||||||||||||||||||
| CagentLagSummaryStaticCapability | 1.3.6.1.4.1.4413.1.1.1.2.2.2.1.11 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current Agent LAG Static Capability enable(1) - Static capability is enabled for this LAG interface disable(2) - Static capability is disabled for this LAG interface
| |||||||||||||||||||||
| CagentLagSummaryHashOption | 1.3.6.1.4.1.4413.1.1.1.2.2.2.1.12 | Integer32 (1..7) | RW | ||||||||||||||||||
column · Integer32 (1..7) · read-write · current LAG Hashing Option.
Valid values correspond to
1 (=Source MAC, VLAN, EtherType, and incoming port
associated with the packet)
2 (=Destination MAC, VLAN, EtherType, and incoming port
associated with the packet)
3 (=Source/Destination MAC, VLAN, EtherType, and incoming
port associated with the packet)
4 (=Source IP and Source TCP/UDP fields of the packet)
5 (=Destination IP and Destination TCP/UDP Port fields
of the packet)
6 (=Source/Destination IP and source/destination TCP/UDP
Port fields of the packet)
7 (=Enhanced hashing mode)
Support for particular options may vary by device. | |||||||||||||||||||||
| CagentLagSummaryMinimumActiveLinks | 1.3.6.1.4.1.4413.1.1.1.2.2.2.1.13 | INTEGER (1..8) | RW | ||||||||||||||||||
column · INTEGER (1..8) · read-write · current Agent LAG Threshold. This configures the threshold(i.e minimum number of active ports) value for trunk port . | |||||||||||||||||||||
| CagentLagSummaryLocalPreferenceMode | 1.3.6.1.4.1.4413.1.1.1.2.2.2.1.14 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current Agent LAG Local Preference Mode. Enables or disables the LAG interface's Local Preference Mode.
| |||||||||||||||||||||
| CagentLagSummaryMtuValue | 1.3.6.1.4.1.4413.1.1.1.2.2.2.1.15 | Unsigned32 (1518..12288) | RW | ||||||||||||||||||
column · Unsigned32 (1518..12288) · read-write · current Configures the MTU value for this LAG interface. The maximum value is dependent on the platform. | |||||||||||||||||||||
| CagentLagSummaryPortCounter | 1.3.6.1.4.1.4413.1.1.1.2.2.2.1.17 | Integer32 (0..2147483647) | RO | ||||||||||||||||||
column · Integer32 (0..2147483647) · read-only · current LAG port flap counter. | |||||||||||||||||||||
| TagentLagDetailedConfigTable | 1.3.6.1.4.1.4413.1.1.1.2.2.3 | NA | |||||||||||||||||||
table · not-accessible · current A detailed table of the switch's LAG config entries | |||||||||||||||||||||
| RagentLagDetailedConfigEntry | 1.3.6.1.4.1.4413.1.1.1.2.2.3.1 | NA | |||||||||||||||||||
row · not-accessible · current Switch's LAG config entry | |||||||||||||||||||||
| CagentLagDetailedLagIndex | 1.3.6.1.4.1.4413.1.1.1.2.2.3.1.1 | Integer32 (0..2147483647) | RO | ||||||||||||||||||
column · Integer32 (0..2147483647) · read-only · current LAG index | |||||||||||||||||||||
| CagentLagDetailedIfIndex | 1.3.6.1.4.1.4413.1.1.1.2.2.3.1.2 | Integer32 (0..2147483647) | RO | ||||||||||||||||||
column · Integer32 (0..2147483647) · read-only · current LAG port index | |||||||||||||||||||||
| CagentLagDetailedPortSpeed | 1.3.6.1.4.1.4413.1.1.1.2.2.3.1.3 | OBJECT IDENTIFIER | RO | ||||||||||||||||||
column · OBJECT IDENTIFIER · read-only · current LAG port speed. See agentPortType for a description and list of valid values. | |||||||||||||||||||||
| CagentLagDetailedPortStatus | 1.3.6.1.4.1.4413.1.1.1.2.2.3.1.4 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current LAG port status. active(1) - Actively participating in the LAG. inactive(2) - Not participating in the LAG.
| |||||||||||||||||||||
| CagentLagDetailedPortCounter | 1.3.6.1.4.1.4413.1.1.1.2.2.3.1.5 | Integer32 (0..2147483647) | RO | ||||||||||||||||||
column · Integer32 (0..2147483647) · read-only · current LAG port flap counter. | |||||||||||||||||||||
| SagentLagConfigStaticCapability | 1.3.6.1.4.1.4413.1.1.1.2.2.4 | INTEGER | RW | obsolete | |||||||||||||||||
scalar · INTEGER · read-write · obsolete Agent LAG Static Capability. Configures whether Static LAGs are supported on this device.
| |||||||||||||||||||||
| SagentLagConfigGroupHashOption | 1.3.6.1.4.1.4413.1.1.1.2.2.5 | Integer32 (1..7) | RW | ||||||||||||||||||
scalar · Integer32 (1..7) · read-write · current LAG Hashing Option.
Valid values correspond to
1 (=Source MAC, VLAN, EtherType, and incoming port
associated with the packet)
2 (=Destination MAC, VLAN, EtherType, and incoming port
associated with the packet)
3 (=Source/Destination MAC, VLAN, EtherType, and incoming
port associated with the packet)
4 (=Source IP and Source TCP/UDP fields of the packet)
5 (=Destination IP and Destination TCP/UDP Port fields
of the packet)
6 (=Source/Destination IP and source/destination TCP/UDP
Port fields of the packet)
7 (=Enhanced hashing mode)
Support for particular options may vary by device.
In BCM 53115 device only options 1 to 3 are support and only
MAC address associated with the packet is used. | |||||||||||||||||||||
| SagentLagClearCounters | 1.3.6.1.4.1.4413.1.1.1.2.2.6 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current Clear LAG stats. Will always return 0 when read.
| |||||||||||||||||||||
| NagentNetworkConfigGroup | 1.3.6.1.4.1.4413.1.1.1.2.3 | ||||||||||||||||||||
| SagentNetworkIPAddress | 1.3.6.1.4.1.4413.1.1.1.2.3.1 | IpAddress | RW | ||||||||||||||||||
scalar · IpAddress · read-write · current The switch's network ip address | |||||||||||||||||||||
| SagentNetworkSubnetMask | 1.3.6.1.4.1.4413.1.1.1.2.3.2 | IpAddress | RW | ||||||||||||||||||
scalar · IpAddress · read-write · current The switch's network subnet mask | |||||||||||||||||||||
| SagentNetworkDefaultGateway | 1.3.6.1.4.1.4413.1.1.1.2.3.3 | IpAddress | RW | ||||||||||||||||||
scalar · IpAddress · read-write · current The switch's network default gateway | |||||||||||||||||||||
| SagentNetworkBurnedInMacAddress | 1.3.6.1.4.1.4413.1.1.1.2.3.4 | PhysAddress | RO | ||||||||||||||||||
scalar · PhysAddress · read-only · current The switch's network Burned-In MAC address | |||||||||||||||||||||
| SagentNetworkLocalAdminMacAddress | 1.3.6.1.4.1.4413.1.1.1.2.3.5 | PhysAddress | RW | ||||||||||||||||||
scalar · PhysAddress · read-write · current The switch's network locally administered MAC address | |||||||||||||||||||||
| SagentNetworkMacAddressType | 1.3.6.1.4.1.4413.1.1.1.2.3.6 | INTEGER | RO | ||||||||||||||||||
scalar · INTEGER · read-only · current The switch's network Mac Address Type
| |||||||||||||||||||||
| SagentNetworkConfigProtocol | 1.3.6.1.4.1.4413.1.1.1.2.3.7 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current The switch's network config protocol
| |||||||||||||||||||||
| SagentNetworkConfigProtocolDhcpRenew | 1.3.6.1.4.1.4413.1.1.1.2.3.8 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current The switch's network config protocol dhcp is renewed. Will always return 0 when read.
| |||||||||||||||||||||
| SagentNetworkWebMode | 1.3.6.1.4.1.4413.1.1.1.2.3.9 | INTEGER | RW | obsolete | |||||||||||||||||
scalar · INTEGER · read-write · obsolete The switch's network config protocol on next bootup This object has been obsoleted by agentHTTPWebMode.
| |||||||||||||||||||||
| SagentNetworkJavaMode | 1.3.6.1.4.1.4413.1.1.1.2.3.10 | INTEGER | RW | obsolete | |||||||||||||||||
scalar · INTEGER · read-write · obsolete Configures the use of the Java interface through the Web. This object has been obsoleted by agentHTTPJavaMode.
| |||||||||||||||||||||
| SagentNetworkMgmtVlan | 1.3.6.1.4.1.4413.1.1.1.2.3.11 | Integer32 (1..4094) | RW | ||||||||||||||||||
scalar · Integer32 (1..4094) · read-write · current The VLAN ID through which the switch can be managed using the agentNetworkIPAddress | |||||||||||||||||||||
| SagentNetworkIpv6AdminMode | 1.3.6.1.4.1.4413.1.1.1.2.3.12 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current The network port IPv6 administrative state
| |||||||||||||||||||||
| SagentNetworkIpv6Gateway | 1.3.6.1.4.1.4413.1.1.1.2.3.13 | Ipv6AddressPrefix | RW | ||||||||||||||||||
scalar · Ipv6AddressPrefix · read-write · current The network port IPv6 Gateway Address | |||||||||||||||||||||
| TagentNetworkIpv6AddrTable | 1.3.6.1.4.1.4413.1.1.1.2.3.14 | NA | |||||||||||||||||||
table · not-accessible · current The list of IPv6 address prefixes for the network port. | |||||||||||||||||||||
| RagentNetworkIpv6AddrEntry | 1.3.6.1.4.1.4413.1.1.1.2.3.14.1 | NA | |||||||||||||||||||
row · not-accessible · current An interface entry containing objects of a particular IPv6 address prefix | |||||||||||||||||||||
| CagentNetworkIpv6AddrPrefix | 1.3.6.1.4.1.4413.1.1.1.2.3.14.1.1 | Ipv6AddressPrefix | NA | ||||||||||||||||||
column · Ipv6AddressPrefix · not-accessible · current The service port IPv6 Address Prefix | |||||||||||||||||||||
| CagentNetworkIpv6AddrPrefixLength | 1.3.6.1.4.1.4413.1.1.1.2.3.14.1.2 | INTEGER (0..128) | RC | ||||||||||||||||||
column · INTEGER (0..128) · read-create · current The service port IPv6 Address Prefix Length | |||||||||||||||||||||
| CagentNetworkIpv6AddrEuiFlag | 1.3.6.1.4.1.4413.1.1.1.2.3.14.1.3 | INTEGER | RC | ||||||||||||||||||
column · INTEGER · read-create · current The service port IPv6 Eui Flag
| |||||||||||||||||||||
| CagentNetworkIpv6AddrStatus | 1.3.6.1.4.1.4413.1.1.1.2.3.14.1.4 | RowStatus | RC | ||||||||||||||||||
| SagentNetworkIpv6AddressAutoConfig | 1.3.6.1.4.1.4413.1.1.1.2.3.15 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current The ipv6 address autoconfig allows the device to perform IPv6 stateless address auto-configuration to discover prefixes on the link and then to add the eui-64 based addresses to the network interface.
| |||||||||||||||||||||
| SagentNetworkIpv6ConfigProtocol | 1.3.6.1.4.1.4413.1.1.1.2.3.16 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current The switch's network IPv6 config protocol
| |||||||||||||||||||||
| SagentNetworkDhcp6ClientDuid | 1.3.6.1.4.1.4413.1.1.1.2.3.17 | DisplayString (SIZE (1..255)) | RO | ||||||||||||||||||
scalar · DisplayString (SIZE (1..255)) · read-only · current The DHCPv6 Client unique DUID. This value cannot be modified | |||||||||||||||||||||
| NagentNetworkStatsGroup | 1.3.6.1.4.1.4413.1.1.1.2.3.18 | ||||||||||||||||||||
| SagentNetworkDhcp6ADVERTISEMessagesReceived | 1.3.6.1.4.1.4413.1.1.1.2.3.18.1 | Counter32 | RO | ||||||||||||||||||
scalar · Counter32 · read-only · current The no. of DHCPv6 messages of type ADVERTISE that have been received by the DHCPv6 client on the network port. | |||||||||||||||||||||
| SagentNetworkDhcp6REPLYMessagesReceived | 1.3.6.1.4.1.4413.1.1.1.2.3.18.2 | Counter32 | RO | ||||||||||||||||||
scalar · Counter32 · read-only · current The no. of DHCPv6 messages of type REPLY that have been received by the DHCPv6 client on the network port. | |||||||||||||||||||||
| SagentNetworkDhcp6ADVERTISEMessagesDiscarded | 1.3.6.1.4.1.4413.1.1.1.2.3.18.3 | Counter32 | RO | ||||||||||||||||||
scalar · Counter32 · read-only · current The no. of DHCPv6 messages of type ADVERTISE that have been discarded by the DHCPv6 client on the network port. | |||||||||||||||||||||
| SagentNetworkDhcp6REPLYMessagesDiscarded | 1.3.6.1.4.1.4413.1.1.1.2.3.18.4 | Counter32 | RO | ||||||||||||||||||
scalar · Counter32 · read-only · current The no. of DHCPv6 messages of type REPLY that have been discarded by the DHCPv6 client on the network port. | |||||||||||||||||||||
| SagentNetworkDhcp6MalformedMessagesReceived | 1.3.6.1.4.1.4413.1.1.1.2.3.18.5 | Counter32 | RO | ||||||||||||||||||
scalar · Counter32 · read-only · current The no. of DHCPv6 messages received malformed by the DHCPv6 client on the network port. | |||||||||||||||||||||
| SagentNetworkDhcp6SOLICITMessagesSent | 1.3.6.1.4.1.4413.1.1.1.2.3.18.6 | Counter32 | RO | ||||||||||||||||||
scalar · Counter32 · read-only · current The no. of DHCPv6 messages of type SOLICIT that have been sent by the DHCPv6 client on the network port. | |||||||||||||||||||||
| SagentNetworkDhcp6REQUESTMessagesSent | 1.3.6.1.4.1.4413.1.1.1.2.3.18.7 | Counter32 | RO | ||||||||||||||||||
scalar · Counter32 · read-only · current The no. of DHCPv6 messages of type REQUEST that have been sent by the DHCPv6 client on the network port. | |||||||||||||||||||||
| SagentNetworkDhcp6RENEWMessagesSent | 1.3.6.1.4.1.4413.1.1.1.2.3.18.8 | Counter32 | RO | ||||||||||||||||||
scalar · Counter32 · read-only · current The no. of DHCPv6 messages of type RENEW that have been sent by the DHCPv6 client on the network port. | |||||||||||||||||||||
| SagentNetworkDhcp6REBINDMessagesSent | 1.3.6.1.4.1.4413.1.1.1.2.3.18.9 | Counter32 | RO | ||||||||||||||||||
scalar · Counter32 · read-only · current The no. of DHCPv6 messages of type REBIND that have been sent by the DHCPv6 client on the network port. | |||||||||||||||||||||
| SagentNetworkDhcp6RELEASEMessagesSent | 1.3.6.1.4.1.4413.1.1.1.2.3.18.10 | Counter32 | RO | ||||||||||||||||||
scalar · Counter32 · read-only · current The no. of DHCPv6 messages of type RELEASE that have been sent by the DHCPv6 client on the network port. | |||||||||||||||||||||
| SagentNetworkDhcp6StatsReset | 1.3.6.1.4.1.4413.1.1.1.2.3.18.11 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current Clear the DHCPv6 Client statistics on the network port. A value of reset(1) is used to reset the statistics. A read on this object will always return the value none(0). The value none(0) cannot be forcibly set by the administrator.
| |||||||||||||||||||||
| NagentServicePortConfigGroup | 1.3.6.1.4.1.4413.1.1.1.2.4 | ||||||||||||||||||||
| SagentServicePortIPAddress | 1.3.6.1.4.1.4413.1.1.1.2.4.1 | IpAddress | RO | ||||||||||||||||||
scalar · IpAddress · read-only · current The switch's ServicePort ip address | |||||||||||||||||||||
| SagentServicePortSubnetMask | 1.3.6.1.4.1.4413.1.1.1.2.4.2 | IpAddress | RO | ||||||||||||||||||
scalar · IpAddress · read-only · current The switch's ServicePort subnet mask | |||||||||||||||||||||
| SagentServicePortDefaultGateway | 1.3.6.1.4.1.4413.1.1.1.2.4.3 | IpAddress | RO | ||||||||||||||||||
scalar · IpAddress · read-only · current The switch's ServicePort default gateway | |||||||||||||||||||||
| SagentServicePortBurnedInMacAddress | 1.3.6.1.4.1.4413.1.1.1.2.4.4 | PhysAddress | RO | ||||||||||||||||||
scalar · PhysAddress · read-only · current The switch's ServicePort Burned-In MAC address | |||||||||||||||||||||
| SagentServicePortConfigProtocol | 1.3.6.1.4.1.4413.1.1.1.2.4.5 | INTEGER | RO | ||||||||||||||||||
scalar · INTEGER · read-only · current The switch's ServicePort config protocol
| |||||||||||||||||||||
| SagentServicePortProtocolDhcpRenew | 1.3.6.1.4.1.4413.1.1.1.2.4.6 | INTEGER | RO | ||||||||||||||||||
scalar · INTEGER · read-only · current The switch's ServicePort protocol dhcp is renewed. Will always return 0 when read.
| |||||||||||||||||||||
| SagentServicePortIpv6AdminMode | 1.3.6.1.4.1.4413.1.1.1.2.4.7 | INTEGER | RO | ||||||||||||||||||
scalar · INTEGER · read-only · current The service port IPv6 administrative state
| |||||||||||||||||||||
| SagentServicePortIpv6Gateway | 1.3.6.1.4.1.4413.1.1.1.2.4.8 | Ipv6AddressPrefix | RO | ||||||||||||||||||
scalar · Ipv6AddressPrefix · read-only · current The service port IPv6 Gateway Address | |||||||||||||||||||||
| TagentServicePortIpv6AddrTable | 1.3.6.1.4.1.4413.1.1.1.2.4.9 | NA | |||||||||||||||||||
table · not-accessible · current The list of IPv6 address prefixes for the service port. | |||||||||||||||||||||
| RagentServicePortIpv6AddrEntry | 1.3.6.1.4.1.4413.1.1.1.2.4.9.1 | NA | |||||||||||||||||||
row · not-accessible · current An interface entry containing objects of a particular IPv6 address prefix | |||||||||||||||||||||
| CagentServicePortIpv6AddrPrefix | 1.3.6.1.4.1.4413.1.1.1.2.4.9.1.1 | Ipv6AddressPrefix | NA | ||||||||||||||||||
column · Ipv6AddressPrefix · not-accessible · current The service port IPv6 Address Prefix | |||||||||||||||||||||
| CagentServicePortIpv6AddrPrefixLength | 1.3.6.1.4.1.4413.1.1.1.2.4.9.1.2 | INTEGER (0..128) | RO | ||||||||||||||||||
column · INTEGER (0..128) · read-only · current The service port IPv6 Address Prefix Length | |||||||||||||||||||||
| CagentServicePortIpv6AddrEuiFlag | 1.3.6.1.4.1.4413.1.1.1.2.4.9.1.3 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current The service port IPv6 Eui Flag
| |||||||||||||||||||||
| CagentServicePortIpv6AddrStatus | 1.3.6.1.4.1.4413.1.1.1.2.4.9.1.4 | RowStatus | RO | ||||||||||||||||||
| SagentServicePortIpv6AddressAutoConfig | 1.3.6.1.4.1.4413.1.1.1.2.4.10 | INTEGER | RO | ||||||||||||||||||
scalar · INTEGER · read-only · current The ipv6 address autoconfig allows the device to perform IPv6 stateless address auto-configuration to discover prefixes on the link and then to add the eui-64 based addresses to the serviceport interface.
| |||||||||||||||||||||
| SagentServicePortIpv6ConfigProtocol | 1.3.6.1.4.1.4413.1.1.1.2.4.11 | INTEGER | RO | ||||||||||||||||||
scalar · INTEGER · read-only · current The service port IPv6 protocol configured on the switch.
| |||||||||||||||||||||
| SagentServicePortDhcp6ClientDuid | 1.3.6.1.4.1.4413.1.1.1.2.4.12 | DisplayString (SIZE (1..255)) | RO | ||||||||||||||||||
scalar · DisplayString (SIZE (1..255)) · read-only · current The DHCPv6 Client unique DUID. This value cannot be modified | |||||||||||||||||||||
| NagentServicePortStatsGroup | 1.3.6.1.4.1.4413.1.1.1.2.4.13 | ||||||||||||||||||||
| SagentServicePortDhcp6ADVERTISEMessagesReceived | 1.3.6.1.4.1.4413.1.1.1.2.4.13.1 | Counter32 | RO | ||||||||||||||||||
scalar · Counter32 · read-only · current The no. of DHCPv6 messages of type ADVERTISE that have been received by the DHCPv6 client on the service port. | |||||||||||||||||||||
| SagentServicePortDhcp6REPLYMessagesReceived | 1.3.6.1.4.1.4413.1.1.1.2.4.13.2 | Counter32 | RO | ||||||||||||||||||
scalar · Counter32 · read-only · current The no. of DHCPv6 messages of type REPLY that have been received by the DHCPv6 client on the service port. | |||||||||||||||||||||
| SagentServicePortDhcp6ADVERTISEMessagesDiscarded | 1.3.6.1.4.1.4413.1.1.1.2.4.13.3 | Counter32 | RO | ||||||||||||||||||
scalar · Counter32 · read-only · current The no. of DHCPv6 messages of type ADVERTISE that have been discarded by the DHCPv6 client on the service port. | |||||||||||||||||||||
| SagentServicePortDhcp6REPLYMessagesDiscarded | 1.3.6.1.4.1.4413.1.1.1.2.4.13.4 | Counter32 | RO | ||||||||||||||||||
scalar · Counter32 · read-only · current The no. of DHCPv6 messages of type REPLY that have been discarded by the DHCPv6 client on the service port. | |||||||||||||||||||||
| SagentServicePortDhcp6MalformedMessagesReceived | 1.3.6.1.4.1.4413.1.1.1.2.4.13.5 | Counter32 | RO | ||||||||||||||||||
scalar · Counter32 · read-only · current The no. of DHCPv6 messages received malformed by the DHCPv6 client on the service port. | |||||||||||||||||||||
| SagentServicePortDhcp6SOLICITMessagesSent | 1.3.6.1.4.1.4413.1.1.1.2.4.13.6 | Counter32 | RO | ||||||||||||||||||
scalar · Counter32 · read-only · current The no. of DHCPv6 messages of type SOLICIT that have been sent by the DHCPv6 client on the service port. | |||||||||||||||||||||
| SagentServicePortDhcp6REQUESTMessagesSent | 1.3.6.1.4.1.4413.1.1.1.2.4.13.7 | Counter32 | RO | ||||||||||||||||||
scalar · Counter32 · read-only · current The no. of DHCPv6 messages of type REQUEST that have been sent by the DHCPv6 client on the service port. | |||||||||||||||||||||
| SagentServicePortDhcp6RENEWMessagesSent | 1.3.6.1.4.1.4413.1.1.1.2.4.13.8 | Counter32 | RO | ||||||||||||||||||
scalar · Counter32 · read-only · current The no. of DHCPv6 messages of type RENEW that have been sent by the DHCPv6 client on the service port. | |||||||||||||||||||||
| SagentServicePortDhcp6REBINDMessagesSent | 1.3.6.1.4.1.4413.1.1.1.2.4.13.9 | Counter32 | RO | ||||||||||||||||||
scalar · Counter32 · read-only · current The no. of DHCPv6 messages of type REBIND that have been sent by the DHCPv6 client on the service port. | |||||||||||||||||||||
| SagentServicePortDhcp6RELEASEMessagesSent | 1.3.6.1.4.1.4413.1.1.1.2.4.13.10 | Counter32 | RO | ||||||||||||||||||
scalar · Counter32 · read-only · current The no. of DHCPv6 messages of type RELEASE that have been sent by the DHCPv6 client on the service port. | |||||||||||||||||||||
| SagentServicePortDhcp6StatsReset | 1.3.6.1.4.1.4413.1.1.1.2.4.13.11 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current Clear the DHCPv6 Client statistics on the service port. A value of reset(1) is used to reset the statistics. A read on this object will always return the value none(0). The value none(0) cannot be forcibly set by the administrator.
| |||||||||||||||||||||
| NagentDhcpClientOptionsConfigGroup | 1.3.6.1.4.1.4413.1.1.1.2.5 | ||||||||||||||||||||
| NagentVendorClassOptionConfigGroup | 1.3.6.1.4.1.4413.1.1.1.2.5.1 | ||||||||||||||||||||
| SagentDhcpClientVendorClassIdMode | 1.3.6.1.4.1.4413.1.1.1.2.5.1.1 | TruthValue | RW | ||||||||||||||||||
scalar · TruthValue · read-write · current This object indicates whether DHCP Vendor Classifier Id Option (60) is enabled for DHCP Network Client. If this object is set to 'true', DHCP Vendor Classifier Id mode is enabled globally. If this object is set to 'false', DHCP Vendor Classifier Id mode is disabled globally. | |||||||||||||||||||||
| SagentDhcpClientVendorClassIdString | 1.3.6.1.4.1.4413.1.1.1.2.5.1.2 | DisplayString (SIZE (0..128)) | RW | ||||||||||||||||||
scalar · DisplayString (SIZE (0..128)) · read-write · current When this object is set with a non-empty string, the DHCP Vendor Classifier Id Option (60) string is enabled for DHCP Network Client. | |||||||||||||||||||||
| NagentSnmpConfigGroup | 1.3.6.1.4.1.4413.1.1.1.2.6 | ||||||||||||||||||||
| SagentSnmpCommunityCreate | 1.3.6.1.4.1.4413.1.1.1.2.6.1 | DisplayString (SIZE (1..16)) | RW | ||||||||||||||||||
scalar · DisplayString (SIZE (1..16)) · read-write · current Creates a new SNMP Community entry.
Defaults: IPAddress 0.0.0.0
IpMask 0.0.0.0
AccessMode read-only
Status config | |||||||||||||||||||||
| TagentSnmpCommunityConfigTable | 1.3.6.1.4.1.4413.1.1.1.2.6.2 | NA | |||||||||||||||||||
table · not-accessible · current A table of the switch's SNMP Config entries | |||||||||||||||||||||
| RagentSnmpCommunityConfigEntry | 1.3.6.1.4.1.4413.1.1.1.2.6.2.1 | NA | |||||||||||||||||||
| CagentSnmpCommunityIndex | 1.3.6.1.4.1.4413.1.1.1.2.6.2.1.1 | Integer32 (0..2147483647) | RO | ||||||||||||||||||
column · Integer32 (0..2147483647) · read-only · current The switch's Snmp Community Index | |||||||||||||||||||||
| CagentSnmpCommunityName | 1.3.6.1.4.1.4413.1.1.1.2.6.2.1.2 | DisplayString (SIZE (1..16)) | RW | ||||||||||||||||||
column · DisplayString (SIZE (1..16)) · read-write · current The switch's Snmp Community Name This name identifies each SNMP community; the name can be up to 16 characters, and it is case-sensitive. Community names in the SNMP community must be unique. If you make multiple entries using the same community name, the first entry is kept and processed and all duplicate entries are ignored. | |||||||||||||||||||||
| CagentSnmpCommunityIPAddress | 1.3.6.1.4.1.4413.1.1.1.2.6.2.1.3 | IpAddress | RW | ||||||||||||||||||
column · IpAddress · read-write · current The switch's Snmp Community IP Address Client IP Address - This attribute is an IP address (or portion thereof) from which this device will accept SNMP packets with the associated community. The requesting entity's IP address is logical-ANDed with the Client IP Mask and the result must match the Client IP Address. Note: If the Client IP Mask is set to 0.0.0.0, a Client IP Address of 0.0.0.0 matches all IP addresses. | |||||||||||||||||||||
| CagentSnmpCommunityIPMask | 1.3.6.1.4.1.4413.1.1.1.2.6.2.1.4 | IpAddress | RW | ||||||||||||||||||
column · IpAddress · read-write · current The switch's Snmp Community IP Mask Client IP Mask - This attribute is a mask to be logical-ANDed with the requesting entity's IP address before comparison with the Client IP Address. If the result matches with Client IP Address then the address is an authenticated IP address. For example, if the Client IP Address is 9.47.128.0 and the corresponding Client IP Mask is 255.255.255.0, a range of incoming IP addresses would match, that is, the incoming IP addresses could be a value in the following range: 9.47.128.0 to 9.47.128.255. To have a specific IP address be the only authenticated IP address, set the Client IP Address to the required IP address and set the Client IP Mask to 255.255.255.255. | |||||||||||||||||||||
| CagentSnmpCommunityAccessMode | 1.3.6.1.4.1.4413.1.1.1.2.6.2.1.5 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current The switch's Snmp Community Access Mode Access Mode - This value can be read-only or read/write. A community with a read-only access allows for switch information to be displayed. A community with a read/write access allows for configuration changes to be made and for information to be displayed.
| |||||||||||||||||||||
| CagentSnmpCommunityStatus | 1.3.6.1.4.1.4413.1.1.1.2.6.2.1.6 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current The switch's Snmp Community Status.
active(1) - This community is active, allowing SNMP managers associated
with this community to manage the switch according to its
access right.
notInService(2) - This community is not active; no SNMP requests using this
community will be accepted. In this case the SNMP manager
associated with this community cannot manage the switch until
the Status is changed back to active(1).
config(3) - The community Status must be set to this value in order to
configure it. When creating a new community entry, initial
Status will be set to this value.
destroy(4) - Set to this value to remove the community from the agent.
| |||||||||||||||||||||
| SagentSnmpTrapReceiverCreate | 1.3.6.1.4.1.4413.1.1.1.2.6.3 | DisplayString (SIZE (1..16)) | RW | ||||||||||||||||||
scalar · DisplayString (SIZE (1..16)) · read-write · current Creates a new trap receiver entry.
Defaults: IPAddress 0.0.0.0
status config | |||||||||||||||||||||
| TagentSnmpTrapReceiverConfigTable | 1.3.6.1.4.1.4413.1.1.1.2.6.4 | NA | |||||||||||||||||||
table · not-accessible · current Trap messages are sent across a network to an SNMP Network Manager. These messages alert the manager to events occurring within the switch or on the network. Up to six simultaneous trap receivers are supported. | |||||||||||||||||||||
| RagentSnmpTrapReceiverConfigEntry | 1.3.6.1.4.1.4413.1.1.1.2.6.4.1 | NA | |||||||||||||||||||
row · not-accessible · current Switch's Snmp Trace Receiver Config entry | |||||||||||||||||||||
| CagentSnmpTrapReceiverIndex | 1.3.6.1.4.1.4413.1.1.1.2.6.4.1.1 | Integer32 (0..2147483647) | RO | ||||||||||||||||||
column · Integer32 (0..2147483647) · read-only · current The switch's Snmp Trap Receiver Index | |||||||||||||||||||||
| CagentSnmpTrapReceiverCommunityName | 1.3.6.1.4.1.4413.1.1.1.2.6.4.1.2 | DisplayString (SIZE (1..16)) | RW | ||||||||||||||||||
column · DisplayString (SIZE (1..16)) · read-write · current The switch's Snmp Trap Receiver Community Name. This is the SNMP community name of the remote network manager; the name can be up to 16 characters, and is case-sensitive. | |||||||||||||||||||||
| CagentSnmpTrapReceiverIPAddress | 1.3.6.1.4.1.4413.1.1.1.2.6.4.1.3 | IpAddress | RW | obsolete | |||||||||||||||||
column · IpAddress · read-write · obsolete IP Address - Each IP address parameter is four integer numbers. The numbers range from 0 to 255. | |||||||||||||||||||||
| CagentSnmpTrapReceiverStatus | 1.3.6.1.4.1.4413.1.1.1.2.6.4.1.4 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current The switch's Snmp Trap Reciever Status.
active(1) - This trap receiver is active, allowing SNMP Traps to
be sent to this receiver.
notInService(2) - This trap reciever is not active; no SNMP Traps will
be sent to this reciever until it's set back to active(1).
config(3) - The trap reciever Status must be set to this value in order
to configure it. When creating a new trap receiver entry,
the Status will initially be set to this value.
Note: agentSnmpTrapReceiverIPAddress must be set to non-zero
before changing to active(1) or notInService(2).
destroy(4) - Set to this value to remove the trap receiver entry from
the agent.
| |||||||||||||||||||||
| CagentSnmpTrapReceiverVersion | 1.3.6.1.4.1.4413.1.1.1.2.6.4.1.5 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current The version of trap sent to this Reciever. snmpv1(1) - This will send a SNMPv1 trap. snmpv2c(2) - This will send a SNMPv2c trap.
| |||||||||||||||||||||
| CagentSnmpTrapReceiverIpv6Address | 1.3.6.1.4.1.4413.1.1.1.2.6.4.1.6 | Ipv6AddressPrefix | RW | obsolete | |||||||||||||||||
column · Ipv6AddressPrefix · read-write · obsolete IPv6 Address for SNMP receiver. | |||||||||||||||||||||
| CagentSnmpTrapReceiverAddressType | 1.3.6.1.4.1.4413.1.1.1.2.6.4.1.7 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current The type of the snmptrap reciever address. The agentSnmpTrapReceiverAddress object is intepreted within the context of agentSnmpTrapReceiverAddressType
| |||||||||||||||||||||
| CagentSnmpTrapReceiverAddress | 1.3.6.1.4.1.4413.1.1.1.2.6.4.1.8 | DisplayString | RW | ||||||||||||||||||
column · DisplayString · read-write · current The snmptrap reciever address. The type of this address is determined by the value of the agentSnmpTrapReceiverAddressType object. The values for agentSnmpTrapReceiverAddressType and agentSnmpTrapReceiverAddress must be consistent. | |||||||||||||||||||||
| NagentSnmpTrapFlagsConfigGroup | 1.3.6.1.4.1.4413.1.1.1.2.6.5 | ||||||||||||||||||||
| SagentSnmpAuthenticationTrapFlag | 1.3.6.1.4.1.4413.1.1.1.2.6.5.1 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current Authentication Flag - Enable/Disable authentication Flag.
| |||||||||||||||||||||
| SagentSnmpLinkUpDownTrapFlag | 1.3.6.1.4.1.4413.1.1.1.2.6.5.2 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current Link Up/Down Flag - Enable/Disable Link Up/Link Down traps for the entire switch. When set to Enable, the Link Up/Down traps will be sent only if the Link Trap flag setting associated with the port (Port Configuration Menu) is set to Enable.
| |||||||||||||||||||||
| SagentSnmpMultipleUsersTrapFlag | 1.3.6.1.4.1.4413.1.1.1.2.6.5.3 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current Multiple Users Flag - Enable/Disable Multiple User traps. When the value is set to Enable, a Multiple User Trap is sent whenever someone logs in to the terminal interface (EIA 232 or Telnet) and there is already an existing terminal interface session.
| |||||||||||||||||||||
| SagentSnmpSpanningTreeTrapFlag | 1.3.6.1.4.1.4413.1.1.1.2.6.5.4 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current Spanning Tree Flag - This flag enables the sending of new root traps and topology change notification traps.
| |||||||||||||||||||||
| SagentSnmpBroadcastStormTrapFlag | 1.3.6.1.4.1.4413.1.1.1.2.6.5.5 | INTEGER | RW | obsolete | |||||||||||||||||
scalar · INTEGER · read-write · obsolete Broadcast Storm Flag - This flag enables or disables the broadcast storm trap. You must also enable Broadcast Storm Recovery Mode (see the Switch Configuration Menu). When this value is set to Enable and Broadcast Storm Recovery mode is set to Enable, the Broadcast Storm Start/End traps are sent when the switch enters and leaves Broadcast Storm Recovery.
| |||||||||||||||||||||
| SagentSnmpTrapSourceInterface | 1.3.6.1.4.1.4413.1.1.1.2.6.6 | InterfaceIndexOrZero | RW | ||||||||||||||||||
scalar · InterfaceIndexOrZero · read-write · current A source-interface selection on an Interface Index (like vlan based routing interface, port based routing interface, loopback interface, tunnel interface). A non-zero value indicates ifIndex for the corresponding interface entry in the ifTable is selected. A zero value indicates the source-interface un-selection. | |||||||||||||||||||||
| SagentSnmpServerPortNum | 1.3.6.1.4.1.4413.1.1.1.2.6.7 | Integer32 (161 | 1025..65535) | RW | ||||||||||||||||||
scalar · Integer32 (161 | 1025..65535) · read-write · current Get/Set the UDP port number that the SNMP server listens to for incoming requests. The port number is an integer value from 1025 to 65535. Before setting this object, check your system (e.g. using 'netstat') to make sure the desired port number is not currently being used by any other service. The default value for this object is 161. Note that changing the value of this object may cause existing SNMP transactions to cease communicating with the device until the client applications are reconfigured to use the new port number. | |||||||||||||||||||||
| NagentSpanningTreeConfigGroup | 1.3.6.1.4.1.4413.1.1.1.2.7 | ||||||||||||||||||||
| SagentSpanningTreeMode | 1.3.6.1.4.1.4413.1.1.1.2.7.1 | INTEGER | RW | obsolete | |||||||||||||||||
scalar · INTEGER · read-write · obsolete The switch's Spanning Tree Switch Status. This functionality is now handled by agentStpAdminMode
| |||||||||||||||||||||
| NagentSwitchConfigGroup | 1.3.6.1.4.1.4413.1.1.1.2.8 | ||||||||||||||||||||
| SagentSwitchFdbAddressAgingTimeout | 1.3.6.1.4.1.4413.1.1.1.2.8.3 | Integer32 (10..1000000) | RW | ||||||||||||||||||
scalar · Integer32 (10..1000000) · read-write · current The address aging timeout. Specifies aging time in seconds (10 - 1000000) before a dynamic MAC address is erased from the Filtering Database. The default value is 300 seconds. | |||||||||||||||||||||
| TagentSwitchAddressAgingTimeoutTable | 1.3.6.1.4.1.4413.1.1.1.2.8.4 | NA | deprecated | ||||||||||||||||||
table · not-accessible · deprecated The switch's address aging timeout table. This functionality is now handled by agentSwitchFdbAddressAgingTimeout. | |||||||||||||||||||||
| RagentSwitchAddressAgingTimeoutEntry | 1.3.6.1.4.1.4413.1.1.1.2.8.4.1 | NA | deprecated | ||||||||||||||||||
row · not-accessible · deprecated Aging information about a specific Filtering Database.
| |||||||||||||||||||||
| CagentSwitchAddressAgingTimeout | 1.3.6.1.4.1.4413.1.1.1.2.8.4.1.1 | Integer32 (10..1000000) | RW | deprecated | |||||||||||||||||
column · Integer32 (10..1000000) · read-write · deprecated The FDB entry's address aging timeout (in seconds) | |||||||||||||||||||||
| TagentSwitchStaticMacFilteringTable | 1.3.6.1.4.1.4413.1.1.1.2.8.5 | NA | |||||||||||||||||||
table · not-accessible · current The switch's static Mac filtering table | |||||||||||||||||||||
| RagentSwitchStaticMacFilteringEntry | 1.3.6.1.4.1.4413.1.1.1.2.8.5.1 | NA | |||||||||||||||||||
row · not-accessible · current Per-port ingress/egress filter configuration based on VLAN Id and MAC address. | |||||||||||||||||||||
| CagentSwitchStaticMacFilteringVlanId | 1.3.6.1.4.1.4413.1.1.1.2.8.5.1.1 | Integer32 (0..2147483647) | RO | ||||||||||||||||||
column · Integer32 (0..2147483647) · read-only · current The Static MAC Filter Vlan Id | |||||||||||||||||||||
| CagentSwitchStaticMacFilteringAddress | 1.3.6.1.4.1.4413.1.1.1.2.8.5.1.2 | MacAddress | RO | ||||||||||||||||||
column · MacAddress · read-only · current The Static MAC Filter MAC address | |||||||||||||||||||||
| CagentSwitchStaticMacFilteringSourcePortMask | 1.3.6.1.4.1.4413.1.1.1.2.8.5.1.3 | AgentPortMask | RW | ||||||||||||||||||
column · AgentPortMask · read-write · current The Static MAC Filter source port mask. When setting this value, the system will ignore configuration for ports not between the first and last valid ports. Configuration of any port numbers between this range that are not valid ports return a failure message, but will still apply configuration for valid ports. To obtain port numbers from interface numbers, use the objects agentPortDot1dBasePort and agentPortIfIndex in the agentPortConfigTable table. | |||||||||||||||||||||
| CagentSwitchStaticMacFilteringDestPortMask | 1.3.6.1.4.1.4413.1.1.1.2.8.5.1.4 | AgentPortMask | RW | ||||||||||||||||||
column · AgentPortMask · read-write · current The Static MAC Filter destination port mask. When setting this value, the system will ignore configuration for ports not between the first and last valid ports. Configuration of any port numbers between this range that are not valid ports return a failure message, but will still apply configuration for valid ports. To obtain port numbers from interface numbers, use the objects agentPortDot1dBasePort and agentPortIfIndex in the agentPortConfigTable table. Configuring destination port mask for a unicast MAC filter is not supported on some platforms. | |||||||||||||||||||||
| CagentSwitchStaticMacFilteringStatus | 1.3.6.1.4.1.4413.1.1.1.2.8.5.1.5 | RowStatus | RC | ||||||||||||||||||
column · RowStatus · read-create · current The Static MAC Filter status. Supported values: active(1) - valid entry createAndGo(4) - used to create a new entry destroy(6) - removes the entry | |||||||||||||||||||||
| NagentSwitchSnoopingGroup | 1.3.6.1.4.1.4413.1.1.1.2.8.6 | ||||||||||||||||||||
| TagentSwitchSnoopingCfgTable | 1.3.6.1.4.1.4413.1.1.1.2.8.6.1 | NA | |||||||||||||||||||
table · not-accessible · current A table of the IGMP/MLD Snooping Global configuration entries. | |||||||||||||||||||||
| RagentSwitchSnoopingCfgEntry | 1.3.6.1.4.1.4413.1.1.1.2.8.6.1.1 | NA | |||||||||||||||||||
row · not-accessible · current Represents entry for Snooping switch Configuration. | |||||||||||||||||||||
| CagentSwitchSnoopingProtocol | 1.3.6.1.4.1.4413.1.1.1.2.8.6.1.1.1 | InetAddressType | RO | ||||||||||||||||||
column · InetAddressType · read-only · current The protocol type of network protocol in use. | |||||||||||||||||||||
| CagentSwitchSnoopingAdminMode | 1.3.6.1.4.1.4413.1.1.1.2.8.6.1.1.2 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current This enables or disables Snooping on the system.
| |||||||||||||||||||||
| CagentSwitchSnoopingPortMask | 1.3.6.1.4.1.4413.1.1.1.2.8.6.1.1.3 | AgentPortMask | RW | ||||||||||||||||||
column · AgentPortMask · read-write · current IGMP/MLD Snooping Port Mask. This allows configuration of IGMP/MLD Snooping on selected ports. IGMP/MLD Snooping cannot be enabled on an interface that has routing enabled, or is a member of a LAG. If a port which has IGMP/MLD Snooping enabled becomes enabled for routing, or is enlisted as a member of a LAG, IGMP/MLD Snooping functionality will be disabled on that port. IGMP/MLD Snooping functionality will be subsequently be reenabled if routing is disabled or LAG membership is removed from an interface that had previously had IGMP/MLD Snooping enabled. To obtain port numbers from interface numbers, use the objects agentPortDot1dBasePort and agentPortIfIndex in the agentPortConfigTable table. | |||||||||||||||||||||
| CagentSwitchSnoopingMulticastControlFramesProcessed | 1.3.6.1.4.1.4413.1.1.1.2.8.6.1.1.4 | Counter32 | RO | ||||||||||||||||||
column · Counter32 · read-only · current Multicast Control Frames Processed by CPU. The number of multicast control frames that have been processed by the CPU. | |||||||||||||||||||||
| CagentSwitchSnoopingProxyQuerierAdminMode | 1.3.6.1.4.1.4413.1.1.1.2.8.6.1.1.5 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current This enables or disables IGMP/MLD Proxy Querier Mode on the system. If it is disabled then IGMP/MLD proxy query with source zero IP address is not sent in response to IGMP/MLD leave packet.
| |||||||||||||||||||||
| NagentSwitchSnoopingIntfGroup | 1.3.6.1.4.1.4413.1.1.1.2.8.7 | ||||||||||||||||||||
| TagentSwitchSnoopingIntfTable | 1.3.6.1.4.1.4413.1.1.1.2.8.7.1 | NA | |||||||||||||||||||
table · not-accessible · current A table of the IGMP/MLD Snooping Interface configuration entries. | |||||||||||||||||||||
| RagentSwitchSnoopingIntfEntry | 1.3.6.1.4.1.4413.1.1.1.2.8.7.1.1 | NA | |||||||||||||||||||
row · not-accessible · current Represents entry for a IGMP/MLD Snooping Interface. | |||||||||||||||||||||
| CagentSwitchSnoopingIntfIndex | 1.3.6.1.4.1.4413.1.1.1.2.8.7.1.1.1 | Unsigned32 (1..65535) | RO | ||||||||||||||||||
column · Unsigned32 (1..65535) · read-only · current The port number to be selected. Each port maps to an interface. | |||||||||||||||||||||
| CagentSwitchSnoopingIntfAdminMode | 1.3.6.1.4.1.4413.1.1.1.2.8.7.1.1.2 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current This enables or disables IGMP/MLD Snooping on a selected interface.
| |||||||||||||||||||||
| CagentSwitchSnoopingIntfGroupMembershipInterval | 1.3.6.1.4.1.4413.1.1.1.2.8.7.1.1.3 | Integer32 (2..3600) | RW | ||||||||||||||||||
column · Integer32 (2..3600) · read-write · current The amount of time in seconds that a switch will wait for a report from a particular group on the selected interface before deleting the interface from the entry. This value must be greater than agentSwitchSnoopingIntfMaxResponseTime. | |||||||||||||||||||||
| CagentSwitchSnoopingIntfMaxResponseTime | 1.3.6.1.4.1.4413.1.1.1.2.8.7.1.1.4 | Integer32 | RW | ||||||||||||||||||
column · Integer32 · read-write · current The amount of time in seconds a switch will wait after sending a query on the selected interface because it did not receive a report for a particular group in that interface. This value must be less than agentSwitchSnoopingIntfGroupMembershipInterval. For IGMP Snooping, this value ranges from 1 to 25 and for MLD Snooping, this value ranges from 1 to 65. | |||||||||||||||||||||
| CagentSwitchSnoopingIntfMRPExpirationTime | 1.3.6.1.4.1.4413.1.1.1.2.8.7.1.1.5 | Integer32 (0..3600) | RW | ||||||||||||||||||
column · Integer32 (0..3600) · read-write · current The amount of time in seconds that a switch will wait for a query to be received on the selected interface before the interface is removed from the list of interfaces with multicast routers attached. | |||||||||||||||||||||
| CagentSwitchSnoopingIntfFastLeaveAdminMode | 1.3.6.1.4.1.4413.1.1.1.2.8.7.1.1.6 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current This enables or disables IGMP/MLD Snooping on the selected interface.
| |||||||||||||||||||||
| CagentSwitchSnoopingIntfMulticastRouterMode | 1.3.6.1.4.1.4413.1.1.1.2.8.7.1.1.7 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current This enables or disables Multicast Routing on the selected interface.
| |||||||||||||||||||||
| CagentSwitchSnoopingIntfVlanIDs | 1.3.6.1.4.1.4413.1.1.1.2.8.7.1.1.8 | VlanList | RO | ||||||||||||||||||
column · VlanList · read-only · current This field lists all the VlanIDs which include the selected interface. | |||||||||||||||||||||
| CagentSwitchSnoopingIntfProxyQuerierAdminMode | 1.3.6.1.4.1.4413.1.1.1.2.8.7.1.1.9 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current This enables or disables IGMP/MLD Proxy Querier on the selected interface. If it is disabled then IGMP/MLD proxy query with source zero IP address is not sent in response to IGMP/MLD leave packet.
| |||||||||||||||||||||
| NagentSwitchSnoopingVlanGroup | 1.3.6.1.4.1.4413.1.1.1.2.8.8 | ||||||||||||||||||||
| TagentSwitchSnoopingVlanTable | 1.3.6.1.4.1.4413.1.1.1.2.8.8.1 | NA | |||||||||||||||||||
table · not-accessible · current A table of the IGMP/MLD Snooping Vlan configuration entries. | |||||||||||||||||||||
| RagentSwitchSnoopingVlanEntry | 1.3.6.1.4.1.4413.1.1.1.2.8.8.1.1 | NA | |||||||||||||||||||
row · not-accessible · current Represents entry for a IGMP/MLD Snooping Vlan. | |||||||||||||||||||||
| CagentSwitchSnoopingVlanAdminMode | 1.3.6.1.4.1.4413.1.1.1.2.8.8.1.1.1 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current This enables or disables IGMP/MLD Snooping on a selected Vlan interface.
| |||||||||||||||||||||
| CagentSwitchSnoopingVlanGroupMembershipInterval | 1.3.6.1.4.1.4413.1.1.1.2.8.8.1.1.2 | Integer32 (2..3600) | RW | ||||||||||||||||||
column · Integer32 (2..3600) · read-write · current The amount of time in seconds that a switch will wait for a report from a particular group on the selected vlan before deleting the interface participating in the vlan from the entry. This value must be greater than agentSwitchSnoopingIntfMaxResponseTime. | |||||||||||||||||||||
| CagentSwitchSnoopingVlanMaxResponseTime | 1.3.6.1.4.1.4413.1.1.1.2.8.8.1.1.3 | Integer32 | RW | ||||||||||||||||||
column · Integer32 · read-write · current The amount of time in seconds a switch will wait after sending a query on the selected vlan because it did not receive a report for a particular group in the interface participating in the vlan. This value must be less than agentSwitchSnoopingIntfGroupMembershipInterval. For IGMP Snooping, this value ranges from 1 to 25 and for MLD Snooping, this value ranges from 1 to 65. | |||||||||||||||||||||
| CagentSwitchSnoopingVlanFastLeaveAdminMode | 1.3.6.1.4.1.4413.1.1.1.2.8.8.1.1.4 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current This enables or disables IGMP/MLD Snooping on the selected vlan.
| |||||||||||||||||||||
| CagentSwitchSnoopingVlanMRPExpirationTime | 1.3.6.1.4.1.4413.1.1.1.2.8.8.1.1.5 | Integer32 (0..3600) | RW | ||||||||||||||||||
column · Integer32 (0..3600) · read-write · current The amount of time in seconds that a switch will wait for a query to be received on the selected interface participating in the vlan before the interface is removed from the list of interfaces with multicast routers attached. This parameter is configurable only for exisiting Vlans. | |||||||||||||||||||||
| CagentSwitchSnoopingVlanReportSuppMode | 1.3.6.1.4.1.4413.1.1.1.2.8.8.1.1.6 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current This enables or disables IGMP Snooping Report Suppression feature on the selected vlan.
| |||||||||||||||||||||
| CagentSwitchSnoopingVlanProxyQuerierAdminMode | 1.3.6.1.4.1.4413.1.1.1.2.8.8.1.1.7 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current This enables or disables IGMP/MLD Proxy Querier on the selected vlan. If it is disabled then IGMP/MLD proxy query with source zero IP address is not sent in response to IGMP/MLD leave packet.
| |||||||||||||||||||||
| NagentSwitchVlanStaticMrouterGroup | 1.3.6.1.4.1.4413.1.1.1.2.8.9 | ||||||||||||||||||||
| TagentSwitchVlanStaticMrouterTable | 1.3.6.1.4.1.4413.1.1.1.2.8.9.1 | NA | |||||||||||||||||||
table · not-accessible · current A table of the IGMP/MLD Static Mrouter Configuration parameters. | |||||||||||||||||||||
| RagentSwitchVlanStaticMrouterEntry | 1.3.6.1.4.1.4413.1.1.1.2.8.9.1.1 | NA | |||||||||||||||||||
row · not-accessible · current Represents entry for a IGMP/MLD Static Mrouter. | |||||||||||||||||||||
| CagentSwitchVlanStaticMrouterAdminMode | 1.3.6.1.4.1.4413.1.1.1.2.8.9.1.1.1 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current This enables or disables IGMP/MLD Mrouter on a per-interface per-vlan basis.
| |||||||||||||||||||||
| NagentSwitchMFDBGroup | 1.3.6.1.4.1.4413.1.1.1.2.8.10 | ||||||||||||||||||||
| TagentSwitchMFDBTable | 1.3.6.1.4.1.4413.1.1.1.2.8.10.1 | NA | |||||||||||||||||||
table · not-accessible · current The Multicast Forwarding Database table | |||||||||||||||||||||
| RagentSwitchMFDBEntry | 1.3.6.1.4.1.4413.1.1.1.2.8.10.1.1 | NA | |||||||||||||||||||
row · not-accessible · current Contains Forwarding and Filtering information per Vlan Index, MAC Address, and Component User. | |||||||||||||||||||||
| CagentSwitchMFDBVlanId | 1.3.6.1.4.1.4413.1.1.1.2.8.10.1.1.1 | VlanIndex | RO | ||||||||||||||||||
column · VlanIndex · read-only · current Vlan Index for which this entry is associated with. | |||||||||||||||||||||
| CagentSwitchMFDBMacAddress | 1.3.6.1.4.1.4413.1.1.1.2.8.10.1.1.2 | MacAddress | RO | ||||||||||||||||||
column · MacAddress · read-only · current A multicast MAC address for which the switch has forwarding and or filtering information. | |||||||||||||||||||||
| CagentSwitchMFDBProtocolType | 1.3.6.1.4.1.4413.1.1.1.2.8.10.1.1.3 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current The component that is responsible for this entry in the Multicast Forwarding Database.
| |||||||||||||||||||||
| CagentSwitchMFDBType | 1.3.6.1.4.1.4413.1.1.1.2.8.10.1.1.4 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current This displays the type of the entry. static(1) - Entries configured by the end user dynamic(2) - Entries added as a result of a learning process or protocol
| |||||||||||||||||||||
| CagentSwitchMFDBDescription | 1.3.6.1.4.1.4413.1.1.1.2.8.10.1.1.5 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current Text description of this multicast table entry. | |||||||||||||||||||||
| CagentSwitchMFDBForwardingPortMask | 1.3.6.1.4.1.4413.1.1.1.2.8.10.1.1.6 | AgentPortMask | RO | ||||||||||||||||||
column · AgentPortMask · read-only · current BitMask indicating which ports this entry indicates should be forwarded. To obtain port numbers from interface numbers, use the objects agentPortDot1dBasePort and agentPortIfIndex in the agentPortConfigTable table. | |||||||||||||||||||||
| CagentSwitchMFDBFilteringPortMask | 1.3.6.1.4.1.4413.1.1.1.2.8.10.1.1.7 | AgentPortMask | RO | ||||||||||||||||||
column · AgentPortMask · read-only · current BitMask indicating which ports this entry indicates should be filtered. To obtain port numbers from interface numbers, use the objects agentPortDot1dBasePort and agentPortIfIndex in the agentPortConfigTable table. | |||||||||||||||||||||
| TagentSwitchMFDBSummaryTable | 1.3.6.1.4.1.4413.1.1.1.2.8.10.2 | NA | |||||||||||||||||||
table · not-accessible · current The Multicast Forwarding Database Summary table | |||||||||||||||||||||
| RagentSwitchMFDBSummaryEntry | 1.3.6.1.4.1.4413.1.1.1.2.8.10.2.1 | NA | |||||||||||||||||||
row · not-accessible · current Summarizes the forwarding ports for all components registered for all MFDB table entries with the same Vlan Index and MAC Address. | |||||||||||||||||||||
| CagentSwitchMFDBSummaryVlanId | 1.3.6.1.4.1.4413.1.1.1.2.8.10.2.1.1 | VlanIndex | RO | ||||||||||||||||||
column · VlanIndex · read-only · current Vlan Index for which this entry is associated with. | |||||||||||||||||||||
| CagentSwitchMFDBSummaryMacAddress | 1.3.6.1.4.1.4413.1.1.1.2.8.10.2.1.2 | MacAddress | RO | ||||||||||||||||||
column · MacAddress · read-only · current A multicast MAC address for which the switch has forwarding and or filtering information. | |||||||||||||||||||||
| CagentSwitchMFDBSummaryForwardingPortMask | 1.3.6.1.4.1.4413.1.1.1.2.8.10.2.1.3 | AgentPortMask | RO | ||||||||||||||||||
column · AgentPortMask · read-only · current Port Mask indicating which ports this entry indicates should be forwarded. To obtain port numbers from interface numbers, use the objects agentPortDot1dBasePort and agentPortIfIndex in the agentPortConfigTable table. | |||||||||||||||||||||
| SagentSwitchMFDBMaxTableEntries | 1.3.6.1.4.1.4413.1.1.1.2.8.10.3 | Gauge32 | RO | ||||||||||||||||||
scalar · Gauge32 · read-only · current This displays the maximum number of entries that can possibly be in the Multicast Forwarding Database table. | |||||||||||||||||||||
| SagentSwitchMFDBMostEntriesUsed | 1.3.6.1.4.1.4413.1.1.1.2.8.10.4 | Gauge32 | RO | ||||||||||||||||||
scalar · Gauge32 · read-only · current This displays the largest number of entries that have been present in the Multicast Forwarding Database table. This value is also known as the MFDB high-water mark. | |||||||||||||||||||||
| SagentSwitchMFDBCurrentEntries | 1.3.6.1.4.1.4413.1.1.1.2.8.10.5 | Gauge32 | RO | ||||||||||||||||||
scalar · Gauge32 · read-only · current This displays the current number of entries in the Multicast Forwarding Database table. | |||||||||||||||||||||
| NagentSwitchDVlanTagGroup | 1.3.6.1.4.1.4413.1.1.1.2.8.11 | ||||||||||||||||||||
| SagentSwitchDVlanTagEthertype | 1.3.6.1.4.1.4413.1.1.1.2.8.11.1 | Integer32 (1..65535) | RW | ||||||||||||||||||
scalar · Integer32 (1..65535) · read-write · current Configures the Double Vlan Tag Ethertype for the switch. If this object is supported, ethertype cannot be configured per port. Commonly used are the Ethertypes for vman tags (34984, or 0x88A8) and dot1q tags (33024, or 0x8100). | |||||||||||||||||||||
| TagentSwitchDVlanTagTable | 1.3.6.1.4.1.4413.1.1.1.2.8.11.2 | NA | |||||||||||||||||||
table · not-accessible · current A table of entries specifying the ethertype (TPID) values. This will let the user specify multiple ethertypes globally. | |||||||||||||||||||||
| RagentSwitchDVlanTagEntry | 1.3.6.1.4.1.4413.1.1.1.2.8.11.2.1 | NA | |||||||||||||||||||
row · not-accessible · current A table entry specifying the ethertype (TPID) values. Commonly used are the Ethertypes for vman tags (34984, or 0x88A8) and dot1q tags (33024, or 0x8100). | |||||||||||||||||||||
| CagentSwitchDVlanTagTPid | 1.3.6.1.4.1.4413.1.1.1.2.8.11.2.1.1 | Integer32 (1..65535) | NA | ||||||||||||||||||
column · Integer32 (1..65535) · not-accessible · current Ethertype value to identify incoming double tagged frames | |||||||||||||||||||||
| CagentSwitchDVlanTagPrimaryTPid | 1.3.6.1.4.1.4413.1.1.1.2.8.11.2.1.2 | INTEGER | RC | ||||||||||||||||||
column · INTEGER · read-create · current Specifies if this TPID is primary TPID for the switch or not. As the system needs one TPID to be active all the time, setting the object to false doesn't modify/remove the entry. Adding another entry and setting it to true overwrites the previous primary TPID.
| |||||||||||||||||||||
| CagentSwitchDVlanTagRowStatus | 1.3.6.1.4.1.4413.1.1.1.2.8.11.2.1.3 | RowStatus | RC | ||||||||||||||||||
column · RowStatus · read-create · current Row status | |||||||||||||||||||||
| TagentSwitchPortDVlanTagTable | 1.3.6.1.4.1.4413.1.1.1.2.8.11.3 | NA | |||||||||||||||||||
table · not-accessible · current A table entries specifying the ethertype (TPID) values per port. | |||||||||||||||||||||
| RagentSwitchPortDVlanTagEntry | 1.3.6.1.4.1.4413.1.1.1.2.8.11.3.1 | NA | |||||||||||||||||||
row · not-accessible · current A table entry specifying the ethertype (TPID) value for a port. | |||||||||||||||||||||
| CagentSwitchPortDVlanTagInterfaceIfIndex | 1.3.6.1.4.1.4413.1.1.1.2.8.11.3.1.1 | Integer32 (0..2147483647) | NA | ||||||||||||||||||
column · Integer32 (0..2147483647) · not-accessible · current Port Id on to which the Ethertype value is mapped | |||||||||||||||||||||
| CagentSwitchPortDVlanTagTPid | 1.3.6.1.4.1.4413.1.1.1.2.8.11.3.1.2 | Integer32 (1..65535) | NA | ||||||||||||||||||
column · Integer32 (1..65535) · not-accessible · current Ethertype value to identify incoming double tagged frames | |||||||||||||||||||||
| CagentSwitchPortDVlanTagMode | 1.3.6.1.4.1.4413.1.1.1.2.8.11.3.1.3 | INTEGER | RC | ||||||||||||||||||
column · INTEGER · read-create · current Controls the Double Vlan Tag mode on this port.
| |||||||||||||||||||||
| CagentSwitchPortDVlanTagCustomerId | 1.3.6.1.4.1.4413.1.1.1.2.8.11.3.1.4 | Integer32 | RC | ||||||||||||||||||
column · Integer32 · read-create · current Configures the Customer ID for the Double Vlan Tag for this port. | |||||||||||||||||||||
| CagentSwitchPortDVlanTagRowStatus | 1.3.6.1.4.1.4413.1.1.1.2.8.11.3.1.5 | RowStatus | RC | ||||||||||||||||||
column · RowStatus · read-create · current Row status | |||||||||||||||||||||
| NagentSwitchStormControlGroup | 1.3.6.1.4.1.4413.1.1.1.2.8.12 | ||||||||||||||||||||
| SagentSwitchDot3FlowControlMode | 1.3.6.1.4.1.4413.1.1.1.2.8.12.1 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current Config switchconfig flowcontrol allows you to enable or disable 802.3x flow control for the switch. This value applies to only full-duplex mode ports. Enabling symmetric flow control allows the switch to send and receive pause frames. Enabling asymmetric flow control allows the switch to receive pause frames but it will not transmit pause frames.
| |||||||||||||||||||||
| SagentSwitchBroadcastControlMode | 1.3.6.1.4.1.4413.1.1.1.2.8.12.4 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current The switch config broadcast allows you to enable or disable broadcast storm recovery mode. When you specify Enable for Broadcast Storm Recovery and the broadcast traffic on any Ethernet port exceeds the configured threshold, the switch blocks (discards) the broadcast traffic.
| |||||||||||||||||||||
| SagentSwitchBroadcastControlThreshold | 1.3.6.1.4.1.4413.1.1.1.2.8.12.5 | Unsigned32 (0..14880000) | RW | ||||||||||||||||||
scalar · Unsigned32 (0..14880000) · read-write · current Configures the broadcast storm recovery threshold for this port as a percentage of port speed or as an absolute pps rate. | |||||||||||||||||||||
| SagentSwitchMulticastControlMode | 1.3.6.1.4.1.4413.1.1.1.2.8.12.6 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current The switch config multicast allows you to enable or disable multicast storm recovery mode. When you specify Enable for multicast Storm Recovery and the multicast traffic on any Ethernet port exceeds the configured threshold, the switch blocks (discards) the multicast traffic.
| |||||||||||||||||||||
| SagentSwitchMulticastControlThreshold | 1.3.6.1.4.1.4413.1.1.1.2.8.12.7 | Unsigned32 (0..14880000) | RW | ||||||||||||||||||
scalar · Unsigned32 (0..14880000) · read-write · current Configures the multicast storm recovery threshold for this port as a percentage of port speed or as an absolute pps rate. | |||||||||||||||||||||
| SagentSwitchUnicastControlMode | 1.3.6.1.4.1.4413.1.1.1.2.8.12.8 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current The switch config unicast allows you to enable or disable unicast storm recovery mode. When you specify Enable for unicast Storm Recovery and the unknown unicast traffic on any Ethernet port exceeds the configured threshold, the switch blocks (discards) the unknown unicast traffic.
| |||||||||||||||||||||
| SagentSwitchUnicastControlThreshold | 1.3.6.1.4.1.4413.1.1.1.2.8.12.9 | Unsigned32 (0..14880000) | RW | ||||||||||||||||||
scalar · Unsigned32 (0..14880000) · read-write · current Configures the unicast storm recovery threshold for this port as a percentage of port speed or as an absolute pps rate. | |||||||||||||||||||||
| SagentSwitchBroadcastControlThresholdUnit | 1.3.6.1.4.1.4413.1.1.1.2.8.12.10 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current Configures the units of the threshold value to percentage of port speed or absolute packets per second.
| |||||||||||||||||||||
| SagentSwitchMulticastControlThresholdUnit | 1.3.6.1.4.1.4413.1.1.1.2.8.12.11 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current Configures the units of the threshold value to percentage of port speed or absolute packets per second.
| |||||||||||||||||||||
| SagentSwitchUnicastControlThresholdUnit | 1.3.6.1.4.1.4413.1.1.1.2.8.12.12 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current Configures the units of the threshold value to percentage of port speed or absolute packets per second.
| |||||||||||||||||||||
| NagentSwitchVlanMacAssociationGroup | 1.3.6.1.4.1.4413.1.1.1.2.8.17 | ||||||||||||||||||||
| TagentSwitchVlanMacAssociationTable | 1.3.6.1.4.1.4413.1.1.1.2.8.17.1 | NA | |||||||||||||||||||
table · not-accessible · current The switch's MAC To VLAN association table | |||||||||||||||||||||
| RagentSwitchVlanMacAssociationEntry | 1.3.6.1.4.1.4413.1.1.1.2.8.17.1.1 | NA | |||||||||||||||||||
row · not-accessible · current VLAN to be assigned to untagged or priority tagged packets based on MAC address. | |||||||||||||||||||||
| CagentSwitchVlanMacAssociationMacAddress | 1.3.6.1.4.1.4413.1.1.1.2.8.17.1.1.1 | MacAddress | NA | ||||||||||||||||||
column · MacAddress · not-accessible · current The Mac address | |||||||||||||||||||||
| CagentSwitchVlanMacAssociationVlanId | 1.3.6.1.4.1.4413.1.1.1.2.8.17.1.1.2 | VlanIndex | NA | ||||||||||||||||||
column · VlanIndex · not-accessible · current The VLAN the Mac address assigned to | |||||||||||||||||||||
| CagentSwitchVlanMacAssociationRowStatus | 1.3.6.1.4.1.4413.1.1.1.2.8.17.1.1.3 | RowStatus | RC | ||||||||||||||||||
column · RowStatus · read-create · current The Mac to VLAN association row status. Supported values: active(1) - valid entry createAndGo(4) - used to create a new entry destroy(6) - removes the entry | |||||||||||||||||||||
| NagentSwitchProtectedPortConfigGroup | 1.3.6.1.4.1.4413.1.1.1.2.8.18 | ||||||||||||||||||||
| TagentSwitchProtectedPortTable | 1.3.6.1.4.1.4413.1.1.1.2.8.18.1 | NA | |||||||||||||||||||
table · not-accessible · current The switch's protected port mapping table | |||||||||||||||||||||
| RagentSwitchProtectedPortEntry | 1.3.6.1.4.1.4413.1.1.1.2.8.18.1.1 | NA | |||||||||||||||||||
row · not-accessible · current Protected ports assigned to groups. | |||||||||||||||||||||
| CagentSwitchProtectedPortGroupId | 1.3.6.1.4.1.4413.1.1.1.2.8.18.1.1.1 | Integer32 (0..2147483647) | NA | ||||||||||||||||||
column · Integer32 (0..2147483647) · not-accessible · current The group that this port belongs to | |||||||||||||||||||||
| CagentSwitchProtectedPortGroupName | 1.3.6.1.4.1.4413.1.1.1.2.8.18.1.1.2 | DisplayString (SIZE (0..32)) | RW | ||||||||||||||||||
column · DisplayString (SIZE (0..32)) · read-write · current The name of the group | |||||||||||||||||||||
| CagentSwitchProtectedPortPortList | 1.3.6.1.4.1.4413.1.1.1.2.8.18.1.1.3 | PortList | RW | ||||||||||||||||||
column · PortList · read-write · current The set of ports that are protected in this group | |||||||||||||||||||||
| NagentSwitchVlanSubnetAssociationGroup | 1.3.6.1.4.1.4413.1.1.1.2.8.19 | ||||||||||||||||||||
| TagentSwitchVlanSubnetAssociationTable | 1.3.6.1.4.1.4413.1.1.1.2.8.19.1 | NA | |||||||||||||||||||
table · not-accessible · current The switch's Subnet To VLAN association table | |||||||||||||||||||||
| RagentSwitchVlanSubnetAssociationEntry | 1.3.6.1.4.1.4413.1.1.1.2.8.19.1.1 | NA | |||||||||||||||||||
row · not-accessible · current VLAN to be assigned to untagged or priority tagged packets based on IP address and Subnet Mask. | |||||||||||||||||||||
| CagentSwitchVlanSubnetAssociationIPAddress | 1.3.6.1.4.1.4413.1.1.1.2.8.19.1.1.1 | IpAddress | NA | ||||||||||||||||||
column · IpAddress · not-accessible · current The ip address | |||||||||||||||||||||
| CagentSwitchVlanSubnetAssociationSubnetMask | 1.3.6.1.4.1.4413.1.1.1.2.8.19.1.1.2 | IpAddress | NA | ||||||||||||||||||
column · IpAddress · not-accessible · current The subnet mask | |||||||||||||||||||||
| CagentSwitchVlanSubnetAssociationVlanId | 1.3.6.1.4.1.4413.1.1.1.2.8.19.1.1.3 | VlanIndex | NA | ||||||||||||||||||
column · VlanIndex · not-accessible · current The VLAN that the IP address and subnet mask assigned to | |||||||||||||||||||||
| CagentSwitchVlanSubnetAssociationRowStatus | 1.3.6.1.4.1.4413.1.1.1.2.8.19.1.1.4 | RowStatus | RC | ||||||||||||||||||
column · RowStatus · read-create · current The Subnet to VLAN association row status. Supported values: active(1) - valid entry createAndGo(4) - used to create a new entry destroy(6) - removes the entry | |||||||||||||||||||||
| NagentSwitchSnoopingQuerierGroup | 1.3.6.1.4.1.4413.1.1.1.2.8.20 | ||||||||||||||||||||
| TagentSwitchSnoopingQuerierCfgTable | 1.3.6.1.4.1.4413.1.1.1.2.8.20.1 | NA | |||||||||||||||||||
table · not-accessible · current A table of the IGMP/MLD Snooping Querier Global configuration entries. | |||||||||||||||||||||
| RagentSwitchSnoopingQuerierCfgEntry | 1.3.6.1.4.1.4413.1.1.1.2.8.20.1.1 | NA | |||||||||||||||||||
row · not-accessible · current Represents entry for Snooping Querier Configuration. | |||||||||||||||||||||
| CagentSwitchSnoopingQuerierAdminMode | 1.3.6.1.4.1.4413.1.1.1.2.8.20.1.1.1 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current This enables or disables Snooping Querier on the system.
| |||||||||||||||||||||
| CagentSwitchSnoopingQuerierVersion | 1.3.6.1.4.1.4413.1.1.1.2.8.20.1.1.2 | Integer32 | RW | ||||||||||||||||||
column · Integer32 · read-write · current This specifies the multicast protocol versions that are supported by the system. | |||||||||||||||||||||
| CagentSwitchSnoopingQuerierAddress | 1.3.6.1.4.1.4413.1.1.1.2.8.20.1.1.3 | InetAddress | RW | ||||||||||||||||||
column · InetAddress · read-write · current This specifies the default source ip address to be used while generating general queries. | |||||||||||||||||||||
| CagentSwitchSnoopingQuerierQueryInterval | 1.3.6.1.4.1.4413.1.1.1.2.8.20.1.1.4 | Integer32 (1..1800) | RW | ||||||||||||||||||
column · Integer32 (1..1800) · read-write · current This specified the timer interval after which the system generates general queries. | |||||||||||||||||||||
| CagentSwitchSnoopingQuerierExpiryInterval | 1.3.6.1.4.1.4413.1.1.1.2.8.20.1.1.5 | Integer32 (60..300) | RW | ||||||||||||||||||
column · Integer32 (60..300) · read-write · current This specified the timer interval after which the detected other querier information is no longer valid. | |||||||||||||||||||||
| TagentSwitchSnoopingQuerierVlanTable | 1.3.6.1.4.1.4413.1.1.1.2.8.20.2 | NA | |||||||||||||||||||
table · not-accessible · current A table of the Snooping Querier Vlan configuration entries. | |||||||||||||||||||||
| RagentSwitchSnoopingQuerierVlanEntry | 1.3.6.1.4.1.4413.1.1.1.2.8.20.2.1 | NA | |||||||||||||||||||
row · not-accessible · current Represents entry for a Snooping Querier configurable Vlan. | |||||||||||||||||||||
| CagentSwitchSnoopingQuerierVlanAdminMode | 1.3.6.1.4.1.4413.1.1.1.2.8.20.2.1.1 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current This enables or disables Snooping Querier on a selected Vlan interface.
| |||||||||||||||||||||
| CagentSwitchSnoopingQuerierVlanOperMode | 1.3.6.1.4.1.4413.1.1.1.2.8.20.2.1.2 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current This specifies the current state of the Snooping Querier on a selected vlan interface
| |||||||||||||||||||||
| CagentSwitchSnoopingQuerierElectionParticipateMode | 1.3.6.1.4.1.4413.1.1.1.2.8.20.2.1.3 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current This enables or disables the Snooping Querier Election Participation mode. When enabled snooping querier switch will participate in querier election up on discovering another querier in the specified vlan. When disabled, up on discovering another querier, snooping querier moves to non-querier state.
| |||||||||||||||||||||
| CagentSwitchSnoopingQuerierVlanAddress | 1.3.6.1.4.1.4413.1.1.1.2.8.20.2.1.4 | InetAddress | RW | ||||||||||||||||||
column · InetAddress · read-write · current This specifies the default source ip address to be used while generating general queries on the specified vlan. | |||||||||||||||||||||
| CagentSwitchSnoopingQuerierOperVersion | 1.3.6.1.4.1.4413.1.1.1.2.8.20.2.1.5 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current This specifies the multicast protocol version that is currently being used by the snooping switch for the specified vlan while generating query messages. | |||||||||||||||||||||
| CagentSwitchSnoopingQuerierOperMaxResponseTime | 1.3.6.1.4.1.4413.1.1.1.2.8.20.2.1.6 | Integer32 (-1 | 0..2147483647) | RO | ||||||||||||||||||
column · Integer32 (-1 | 0..2147483647) · read-only · current The amount of time in seconds a switch will wait after sending a query on the selected vlan because it did not receive a report for a particular group in the interface participating in the vlan. This object is valid only when agentSwitchSnoopingQuerierOperVersion object is valid. (-1) - indicates that parameter is not available; ( 0) - indicates that response time is less then 1 second. | |||||||||||||||||||||
| CagentSwitchSnoopingQuerierLastQuerierAddress | 1.3.6.1.4.1.4413.1.1.1.2.8.20.2.1.7 | InetAddress | RO | ||||||||||||||||||
column · InetAddress · read-only · current This specifies the last querier's ip address for the specified vlan. It represents the detected other multicast querier in the vlan. | |||||||||||||||||||||
| CagentSwitchSnoopingQuerierLastQuerierVersion | 1.3.6.1.4.1.4413.1.1.1.2.8.20.2.1.8 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current This specifies the multicast protocol version that is currently being used by the detected other multicast querier for the specified vlan. (-1) - indicates that parameter is not available. | |||||||||||||||||||||
| NagentDaiConfigGroup | 1.3.6.1.4.1.4413.1.1.1.2.8.21 | ||||||||||||||||||||
| SagentDaiSrcMacValidate | 1.3.6.1.4.1.4413.1.1.1.2.8.21.1 | TruthValue | RW | ||||||||||||||||||
scalar · TruthValue · read-write · current This object indicates whether Sender MAC validation in the ARP packets is enabled. If this object is set to 'true', validation is enabled. If this object is set to 'false', validation is disabled. | |||||||||||||||||||||
| SagentDaiDstMacValidate | 1.3.6.1.4.1.4413.1.1.1.2.8.21.2 | TruthValue | RW | ||||||||||||||||||
scalar · TruthValue · read-write · current This object indicates whether Target MAC validation in the ARP Response packets is enabled. If this object is set to 'true', validation is enabled. If this object is set to 'false', validation is disabled. | |||||||||||||||||||||
| SagentDaiIPValidate | 1.3.6.1.4.1.4413.1.1.1.2.8.21.3 | TruthValue | RW | ||||||||||||||||||
scalar · TruthValue · read-write · current This object indicates whether IP address validation in the ARP packets is enabled. If this object is set to 'true', validation is enabled. If this object is set to 'false', validation is disabled. | |||||||||||||||||||||
| TagentDaiVlanConfigTable | 1.3.6.1.4.1.4413.1.1.1.2.8.21.4 | NA | |||||||||||||||||||
table · not-accessible · current A table provides the mechanism to control Dynamic ARP Inspection per VLAN. When a VLAN is created in a device supporting this table, a corresponding entry of this table will be added. | |||||||||||||||||||||
| RagentDaiVlanConfigEntry | 1.3.6.1.4.1.4413.1.1.1.2.8.21.4.1 | NA | |||||||||||||||||||
row · not-accessible · current A row instance contains the configuration for Dynamic ARP Inspection at each existing VLAN.
| |||||||||||||||||||||
| CagentDaiVlanIndex | 1.3.6.1.4.1.4413.1.1.1.2.8.21.4.1.1 | VlanIndex | NA | ||||||||||||||||||
column · VlanIndex · not-accessible · current This object indicates the VLAN number on which Dynamic ARP Inspection feature is configured. | |||||||||||||||||||||
| CagentDaiVlanDynArpInspEnable | 1.3.6.1.4.1.4413.1.1.1.2.8.21.4.1.2 | TruthValue | RW | ||||||||||||||||||
column · TruthValue · read-write · current This object indicates whether Dynamic ARP Inspection is enabled in this VLAN. If this object is set to 'true', Dynamic ARP Inspection is enabled. If this object is set to 'false', Dynamic ARP Inspection is disabled. | |||||||||||||||||||||
| CagentDaiVlanLoggingEnable | 1.3.6.1.4.1.4413.1.1.1.2.8.21.4.1.3 | TruthValue | RW | ||||||||||||||||||
column · TruthValue · read-write · current This object indicates whether the Dynamic ARP Inspection logging is enabled on this VlAN. If this object is set to 'true', Dynamic ARP Inspection logging is enabled. If this object is set to 'false', Dynamic ARP Inspection loging is disabled. | |||||||||||||||||||||
| CagentDaiVlanArpAclName | 1.3.6.1.4.1.4413.1.1.1.2.8.21.4.1.4 | DisplayString (SIZE (0..31)) | RW | ||||||||||||||||||
column · DisplayString (SIZE (0..31)) · read-write · current This object indicates the ARP ACL name set for this VLAN. | |||||||||||||||||||||
| CagentDaiVlanArpAclStaticFlag | 1.3.6.1.4.1.4413.1.1.1.2.8.21.4.1.5 | TruthValue | RW | ||||||||||||||||||
column · TruthValue · read-write · current This object indicates whether the ARP ACL set for this VLAN has static flag set. If this object is set to 'true', static flag is enabled. If this object is set to 'false', static flag is disabled. | |||||||||||||||||||||
| SagentDaiStatsReset | 1.3.6.1.4.1.4413.1.1.1.2.8.21.5 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current Clear the DAI statistics on all vlans. A value of reset(1) is used to reset the statistics. A read on this object will always return the value none(0). The value none(0) cannot be forcibly set by the administrator.
| |||||||||||||||||||||
| TagentDaiVlanStatsTable | 1.3.6.1.4.1.4413.1.1.1.2.8.21.6 | NA | |||||||||||||||||||
table · not-accessible · current A table provides the mechanism to control Dynamic ARP Inspection per VLAN. When a VLAN is created in a device supporting this table, a corresponding entry of this table will be added. | |||||||||||||||||||||
| RagentDaiVlanStatsEntry | 1.3.6.1.4.1.4413.1.1.1.2.8.21.6.1 | NA | |||||||||||||||||||
row · not-accessible · current A row instance contains the Dynamic ARP Inspection statistics per VLAN. | |||||||||||||||||||||
| CagentDaiVlanStatsIndex | 1.3.6.1.4.1.4413.1.1.1.2.8.21.6.1.1 | VlanIndex | NA | ||||||||||||||||||
column · VlanIndex · not-accessible · current This object indicates the VLAN number on which Dynamic ARP Inspection statistics are retrieved. | |||||||||||||||||||||
| CagentDaiVlanPktsForwarded | 1.3.6.1.4.1.4413.1.1.1.2.8.21.6.1.2 | Counter32 | RO | ||||||||||||||||||
column · Counter32 · read-only · current Number of valid ARP packets forwarded by DAI. | |||||||||||||||||||||
| CagentDaiVlanPktsDropped | 1.3.6.1.4.1.4413.1.1.1.2.8.21.6.1.3 | Counter32 | RO | ||||||||||||||||||
column · Counter32 · read-only · current Number of invalid ARP packets dropped by DAI. | |||||||||||||||||||||
| CagentDaiVlanDhcpDrops | 1.3.6.1.4.1.4413.1.1.1.2.8.21.6.1.4 | Counter32 | RO | ||||||||||||||||||
column · Counter32 · read-only · current Number of ARP packets that were dropped by DAI as there is no matching DHCP Snooping binding entry found. | |||||||||||||||||||||
| CagentDaiVlanDhcpPermits | 1.3.6.1.4.1.4413.1.1.1.2.8.21.6.1.5 | Counter32 | RO | ||||||||||||||||||
column · Counter32 · read-only · current Number of ARP packets that were forwarded by DAI as there is a matching DHCP Snooping binding entry found. | |||||||||||||||||||||
| CagentDaiVlanAclDrops | 1.3.6.1.4.1.4413.1.1.1.2.8.21.6.1.6 | Counter32 | RO | ||||||||||||||||||
column · Counter32 · read-only · current Number of ARP packets that were dropped by DAI as there is no matching ARP ACL rule found for this Vlan and the static flag is set on this vlan. | |||||||||||||||||||||
| CagentDaiVlanAclPermits | 1.3.6.1.4.1.4413.1.1.1.2.8.21.6.1.7 | Counter32 | RO | ||||||||||||||||||
column · Counter32 · read-only · current Number of ARP packets that were permitted by DAI as there is a matching ARP ACL rule found for this Vlan. | |||||||||||||||||||||
| CagentDaiVlanSrcMacFailures | 1.3.6.1.4.1.4413.1.1.1.2.8.21.6.1.8 | Counter32 | RO | ||||||||||||||||||
column · Counter32 · read-only · current Number of ARP packets that were dropped by DAI as the sender mac address in ARP packet didn't match the source mac in ethernet header. | |||||||||||||||||||||
| CagentDaiVlanDstMacFailures | 1.3.6.1.4.1.4413.1.1.1.2.8.21.6.1.9 | Counter32 | RO | ||||||||||||||||||
column · Counter32 · read-only · current Number of ARP packets that were dropped by DAI as the target mac address in ARP reply packet didn't match the destination mac in ethernet header. | |||||||||||||||||||||
| CagentDaiVlanIpValidFailures | 1.3.6.1.4.1.4413.1.1.1.2.8.21.6.1.10 | Counter32 | RO | ||||||||||||||||||
column · Counter32 · read-only · current Number of ARP packets that were dropped by DAI as the sender IP address in ARP packet or target IP address in ARP reply packet is invalid. Invalid addresses include 0.0.0.0, 255.255.255.255, IP multicast addresses, class E addresses (240.0.0.0/4), loopback addresses (127.0.0.0/8). | |||||||||||||||||||||
| TagentDaiIfConfigTable | 1.3.6.1.4.1.4413.1.1.1.2.8.21.7 | NA | |||||||||||||||||||
table · not-accessible · current A table provides the mechanism to configure the trust state for Dynamic ARP Inspection purpose at each physical interface capable of this feature. | |||||||||||||||||||||
| RagentDaiIfConfigEntry | 1.3.6.1.4.1.4413.1.1.1.2.8.21.7.1 | NA | |||||||||||||||||||
row · not-accessible · current A row instance contains the configuration for Dynamic ARP Inspection at each physical interface capable of this feature.
| |||||||||||||||||||||
| CagentDaiIfTrustEnable | 1.3.6.1.4.1.4413.1.1.1.2.8.21.7.1.1 | TruthValue | RW | ||||||||||||||||||
column · TruthValue · read-write · current This object indicates whether the interface is trusted for Dynamic ARP Inspection purpose. If this object is set to 'true', the interface is trusted. ARP packets coming to this interface will be forwarded without checking. If this object is set to 'false', the interface is not trusted. ARP packets coming to this interface will be subjected to ARP inspection. | |||||||||||||||||||||
| CagentDaiIfRateLimit | 1.3.6.1.4.1.4413.1.1.1.2.8.21.7.1.2 | Integer32 (-1 | 0..300) | RW | ||||||||||||||||||
column · Integer32 (-1 | 0..300) · read-write · current This object indicates rate limit value for Dynamic ARP Inspection purpose. If the incoming rate of ARP packets exceeds the value of this object for consecutively burst interval seconds, ARP packets will be dropped. Value of -1 indicates that there is no rate limit.
| |||||||||||||||||||||
| CagentDaiIfBurstInterval | 1.3.6.1.4.1.4413.1.1.1.2.8.21.7.1.3 | Unsigned32 (1..15) | RW | ||||||||||||||||||
column · Unsigned32 (1..15) · read-write · current This object indicates the burst interval value for rate limiting purpose on this interface. | |||||||||||||||||||||
| NagentArpAclGroup | 1.3.6.1.4.1.4413.1.1.1.2.8.22 | ||||||||||||||||||||
| TagentArpAclTable | 1.3.6.1.4.1.4413.1.1.1.2.8.22.1 | NA | |||||||||||||||||||
table · not-accessible · current A table of the ARP ACL entries | |||||||||||||||||||||
| RagentArpAclEntry | 1.3.6.1.4.1.4413.1.1.1.2.8.22.1.1 | NA | |||||||||||||||||||
| CagentArpAclName | 1.3.6.1.4.1.4413.1.1.1.2.8.22.1.1.1 | DisplayString (SIZE (1..31)) | RC | ||||||||||||||||||
column · DisplayString (SIZE (1..31)) · read-create · current Name of the ARP ACL, which must consist of 1 to 31 alphanumeric characters and uniquely identify this ARP ACL. This object must be set to complete a new ARP ACL row instance. | |||||||||||||||||||||
| CagentArpAclRowStatus | 1.3.6.1.4.1.4413.1.1.1.2.8.22.1.1.2 | RowStatus | RC | ||||||||||||||||||
column · RowStatus · read-create · current The status of this conceptual row. Entries can not be deleted until all rows in arpAclRuleTable with corresponding values of arpAclIndex have been deleted. active(1) - this ACL instance is active createAndGo(4) - set to this value to create an instance destroy(6) - set to this value to delete an instance | |||||||||||||||||||||
| TagentArpAclRuleTable | 1.3.6.1.4.1.4413.1.1.1.2.8.22.2 | NA | |||||||||||||||||||
table · not-accessible · current A table of the ARP ACL Rule entries | |||||||||||||||||||||
| RagentArpAclRuleEntry | 1.3.6.1.4.1.4413.1.1.1.2.8.22.2.1 | NA | |||||||||||||||||||
row · not-accessible · current Represents entry for a set of ARP ACL-match rules | |||||||||||||||||||||
| CagentArpAclRuleMatchSenderIpAddr | 1.3.6.1.4.1.4413.1.1.1.2.8.22.2.1.1 | IpAddress | RC | ||||||||||||||||||
column · IpAddress · read-create · current Sender IP address match value for the ARP ACL. | |||||||||||||||||||||
| CagentArpAclRuleMatchSenderMacAddr | 1.3.6.1.4.1.4413.1.1.1.2.8.22.2.1.2 | MacAddress | RC | ||||||||||||||||||
column · MacAddress · read-create · current Sender MAC address match value for the ARP ACL. | |||||||||||||||||||||
| CagentArpAclRuleRowStatus | 1.3.6.1.4.1.4413.1.1.1.2.8.22.2.1.3 | RowStatus | RC | ||||||||||||||||||
column · RowStatus · read-create · current The status of this conceptual row. active(1) - this ACL Rule is active createAndGo(4) - set to this value to create an instance destroy(6) - set to this value to delete an instance | |||||||||||||||||||||
| NagentDhcpSnoopingConfigGroup | 1.3.6.1.4.1.4413.1.1.1.2.8.23 | ||||||||||||||||||||
| SagentDhcpSnoopingAdminMode | 1.3.6.1.4.1.4413.1.1.1.2.8.23.1 | TruthValue | RW | ||||||||||||||||||
scalar · TruthValue · read-write · current This object indicates whether DHCP Snooping is enabled globally. If this object is set to 'true',admin mode is enabled globally. If this object is set to 'false',admin mode is disabled globally. | |||||||||||||||||||||
| SagentDhcpSnoopingVerifyMac | 1.3.6.1.4.1.4413.1.1.1.2.8.23.2 | TruthValue | RW | ||||||||||||||||||
scalar · TruthValue · read-write · current This object indicates whether source Mac address in the received DHCP Message needs to be verified or not. If this object is set to 'true',verifyMac is enabled globally. If this object is set to 'false',verifyMac is disabled globally. | |||||||||||||||||||||
| TagentDhcpSnoopingVlanConfigTable | 1.3.6.1.4.1.4413.1.1.1.2.8.23.3 | NA | |||||||||||||||||||
table · not-accessible · current A table provides the mechanism to control DHCP SNOOPING per VLAN. When a VLAN is created in a device supporting this table, a corresponding entry of this table will be added. | |||||||||||||||||||||
| RagentDhcpSnoopingVlanConfigEntry | 1.3.6.1.4.1.4413.1.1.1.2.8.23.3.1 | NA | |||||||||||||||||||
row · not-accessible · current A row instance contains the configuration for DHCP SNOOPING at each existing VLAN. | |||||||||||||||||||||
| CagentDhcpSnoopingVlanIndex | 1.3.6.1.4.1.4413.1.1.1.2.8.23.3.1.1 | VlanIndex | NA | ||||||||||||||||||
column · VlanIndex · not-accessible · current This object indicates the VLAN number on which DHCP SNOOPING Inspection feature is configured. | |||||||||||||||||||||
| CagentDhcpSnoopingVlanEnable | 1.3.6.1.4.1.4413.1.1.1.2.8.23.3.1.2 | TruthValue | RW | ||||||||||||||||||
column · TruthValue · read-write · current This object indicates whether DHCP SNOOPING is enabled in this VLAN. If this object is set to 'true', DHCP SNOOPING is enabled. If this object is set to 'false', DHCP SNOOPING is disabled. | |||||||||||||||||||||
| TagentDhcpSnoopingIfConfigTable | 1.3.6.1.4.1.4413.1.1.1.2.8.23.4 | NA | |||||||||||||||||||
table · not-accessible · current A table provides the mechanism to configure the trust state for DHCP snooping purpose at each physical interface capable of this feature. | |||||||||||||||||||||
| RagentDhcpSnoopingIfConfigEntry | 1.3.6.1.4.1.4413.1.1.1.2.8.23.4.1 | NA | |||||||||||||||||||
row · not-accessible · current A row instance contains the configuration for DHCP snooping at each physical interface capable of this feature.
| |||||||||||||||||||||
| CagentDhcpSnoopingIfTrustEnable | 1.3.6.1.4.1.4413.1.1.1.2.8.23.4.1.1 | TruthValue | RW | ||||||||||||||||||
column · TruthValue · read-write · current This object indicates whether the interface is trusted for DHCP snooping purpose. | |||||||||||||||||||||
| CagentDhcpSnoopingIfLogEnable | 1.3.6.1.4.1.4413.1.1.1.2.8.23.4.1.2 | TruthValue | RW | ||||||||||||||||||
column · TruthValue · read-write · current This object indicates whether the Logging needs on DHCP snooping validations or not | |||||||||||||||||||||
| CagentDhcpSnoopingIfRateLimit | 1.3.6.1.4.1.4413.1.1.1.2.8.23.4.1.3 | Integer32 (-1 | 0..300) | RW | ||||||||||||||||||
column · Integer32 (-1 | 0..300) · read-write · current This object indicates rate limit value for DHCP Snooping purpose. If the incoming rate of DHCP packets exceeds the value of this object for consecutively burst interval seconds, DHCP packets will be dropped. Value of -1 indicates that there is no rate limit.
| |||||||||||||||||||||
| CagentDhcpSnoopingIfBurstInterval | 1.3.6.1.4.1.4413.1.1.1.2.8.23.4.1.4 | Integer32 (-1 | 1..15) | RW | ||||||||||||||||||
column · Integer32 (-1 | 1..15) · read-write · current This object indicates the burst interval value for rate limiting purpose on this interface. Value of -1 indicates that there is no burst interval. | |||||||||||||||||||||
| TagentIpsgIfConfigTable | 1.3.6.1.4.1.4413.1.1.1.2.8.23.5 | NA | |||||||||||||||||||
table · not-accessible · current A table provides the mechanism to configure the IPSG at each physical interface capable of this feature. | |||||||||||||||||||||
| RagentIpsgIfConfigEntry | 1.3.6.1.4.1.4413.1.1.1.2.8.23.5.1 | NA | |||||||||||||||||||
row · not-accessible · current A row instance contains the configuration for IPSG at each physical interface capable of this feature.
| |||||||||||||||||||||
| CagentIpsgIfVerifySource | 1.3.6.1.4.1.4413.1.1.1.2.8.23.5.1.1 | TruthValue | RW | ||||||||||||||||||
column · TruthValue · read-write · current This object indicates whether IP packets received on this interface are filtered based on whether IP Source Guard considers the source IP address to be a valid client address. Setting this variable to false automatically sets agentIpsgIfPortSecurity to false. | |||||||||||||||||||||
| CagentIpsgIfPortSecurity | 1.3.6.1.4.1.4413.1.1.1.2.8.23.5.1.2 | TruthValue | RW | ||||||||||||||||||
column · TruthValue · read-write · current This object indicates whether IP packets received on this interface are filtered based on whether IP Source Guard considers the source MAC address to be a valid client address. The port security option cannot be enabled unless agentIpsgIfVerifySource is also enabled. That is, MAC address filtering cannot be done without also doing IP address filtering. But IP address filtering can be done without MAC address filtering. Once the port security option is enabled, it can only be disabled by disabling agentIpsgIfVerifySource. | |||||||||||||||||||||
| SagentDhcpSnoopingStatsReset | 1.3.6.1.4.1.4413.1.1.1.2.8.23.6 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current Clear the DHCP snooping statistics on all ports. A value of reset(1) is used to reset the statistics. A read on this object will always return the value none(0). The value none(0) cannot be forcibly set by the administrator.
| |||||||||||||||||||||
| TagentDhcpSnoopingStatsTable | 1.3.6.1.4.1.4413.1.1.1.2.8.23.7 | NA | |||||||||||||||||||
table · not-accessible · current A table provides the mechanism for statics of DHCP snooping. | |||||||||||||||||||||
| RagentDhcpSnoopingStatsEntry | 1.3.6.1.4.1.4413.1.1.1.2.8.23.7.1 | NA | |||||||||||||||||||
row · not-accessible · current A row instance contains the DHCP snooping statistics per VLAN.
| |||||||||||||||||||||
| CagentDhcpSnoopingMacVerifyFailures | 1.3.6.1.4.1.4413.1.1.1.2.8.23.7.1.1 | Counter32 | RO | ||||||||||||||||||
column · Counter32 · read-only · current This object indicates the number of failure verifications of client mac address with source mac address | |||||||||||||||||||||
| CagentDhcpSnoopingInvalidClientMessages | 1.3.6.1.4.1.4413.1.1.1.2.8.23.7.1.2 | Counter32 | RO | ||||||||||||||||||
column · Counter32 · read-only · current This object indicates the number of invalid DHCP release, request and decline messages | |||||||||||||||||||||
| CagentDhcpSnoopingInvalidServerMessages | 1.3.6.1.4.1.4413.1.1.1.2.8.23.7.1.3 | Counter32 | RO | ||||||||||||||||||
column · Counter32 · read-only · current This object indicates the number of invalid DHCP server mesaages | |||||||||||||||||||||
| TagentStaticIpsgBindingTable | 1.3.6.1.4.1.4413.1.1.1.2.8.23.8 | NA | |||||||||||||||||||
table · not-accessible · current A table of the IPSG static entries | |||||||||||||||||||||
| RagentStaticIpsgBindingEntry | 1.3.6.1.4.1.4413.1.1.1.2.8.23.8.1 | NA | |||||||||||||||||||
row · not-accessible · current Represents a binding in IPSG table | |||||||||||||||||||||
| CagentStaticIpsgBindingIfIndex | 1.3.6.1.4.1.4413.1.1.1.2.8.23.8.1.1 | InterfaceIndex | RC | ||||||||||||||||||
column · InterfaceIndex · read-create · current Interface on which this IPSG binding is going to be added. | |||||||||||||||||||||
| CagentStaticIpsgBindingVlanId | 1.3.6.1.4.1.4413.1.1.1.2.8.23.8.1.2 | VlanIndex | RC | ||||||||||||||||||
column · VlanIndex · read-create · current VLAN to whcig this IPSG binding is going to be added. | |||||||||||||||||||||
| CagentStaticIpsgBindingIpAddr | 1.3.6.1.4.1.4413.1.1.1.2.8.23.8.1.3 | IpAddress | RC | ||||||||||||||||||
column · IpAddress · read-create · current IP address match value for the IPSG Binding. | |||||||||||||||||||||
| CagentStaticIpsgBindingMacAddr | 1.3.6.1.4.1.4413.1.1.1.2.8.23.8.1.4 | MacAddress | RC | ||||||||||||||||||
column · MacAddress · read-create · current MAC address match value for the IPSG Binding. | |||||||||||||||||||||
| CagentStaticIpsgBindingRowStatus | 1.3.6.1.4.1.4413.1.1.1.2.8.23.8.1.5 | RowStatus | RC | ||||||||||||||||||
column · RowStatus · read-create · current The status of this conceptual row. active(1) - this IPSG Binding is active createAndGo(4) - set to this value to create an instance destroy(6) - set to this value to delete an instance | |||||||||||||||||||||
| TagentDynamicIpsgBindingTable | 1.3.6.1.4.1.4413.1.1.1.2.8.23.9 | NA | |||||||||||||||||||
table · not-accessible · current A table of the IPSG dynamic entries | |||||||||||||||||||||
| RagentDynamicIpsgBindingEntry | 1.3.6.1.4.1.4413.1.1.1.2.8.23.9.1 | NA | |||||||||||||||||||
row · not-accessible · current Represents a binding in IPSG table | |||||||||||||||||||||
| CagentDynamicIpsgBindingIfIndex | 1.3.6.1.4.1.4413.1.1.1.2.8.23.9.1.1 | InterfaceIndex | RO | ||||||||||||||||||
column · InterfaceIndex · read-only · current Interface on which this IPSG binding is added. | |||||||||||||||||||||
| CagentDynamicIpsgBindingVlanId | 1.3.6.1.4.1.4413.1.1.1.2.8.23.9.1.2 | VlanIndex | RO | ||||||||||||||||||
column · VlanIndex · read-only · current VLAN to which this IPSG binding is going to be added. | |||||||||||||||||||||
| CagentDynamicIpsgBindingIpAddr | 1.3.6.1.4.1.4413.1.1.1.2.8.23.9.1.3 | IpAddress | RO | ||||||||||||||||||
column · IpAddress · read-only · current Sender IP address match value for the IPSG Binding. | |||||||||||||||||||||
| CagentDynamicIpsgBindingMacAddr | 1.3.6.1.4.1.4413.1.1.1.2.8.23.9.1.4 | MacAddress | RO | ||||||||||||||||||
column · MacAddress · read-only · current MAC address match value for the IPSG Binding. | |||||||||||||||||||||
| TagentStaticDsBindingTable | 1.3.6.1.4.1.4413.1.1.1.2.8.23.10 | NA | |||||||||||||||||||
table · not-accessible · current A table of the DHCP SNOOPING static entries | |||||||||||||||||||||
| RagentStaticDsBindingEntry | 1.3.6.1.4.1.4413.1.1.1.2.8.23.10.1 | NA | |||||||||||||||||||
row · not-accessible · current Represents a binding in DHCP SNOOPING table | |||||||||||||||||||||
| CagentStaticDsBindingIfIndex | 1.3.6.1.4.1.4413.1.1.1.2.8.23.10.1.1 | InterfaceIndex | RC | ||||||||||||||||||
column · InterfaceIndex · read-create · current Interface on which this DHCP SNOOPING binding is going to be added. | |||||||||||||||||||||
| CagentStaticDsBindingVlanId | 1.3.6.1.4.1.4413.1.1.1.2.8.23.10.1.2 | VlanId | RC | ||||||||||||||||||
column · VlanId · read-create · current VLAN to which this DHCP SNOOPING binding is going to be added. | |||||||||||||||||||||
| CagentStaticDsBindingMacAddr | 1.3.6.1.4.1.4413.1.1.1.2.8.23.10.1.3 | MacAddress | RC | ||||||||||||||||||
column · MacAddress · read-create · current MAC address match value for the DHCP SNOOPING Binding. | |||||||||||||||||||||
| CagentStaticDsBindingIpAddr | 1.3.6.1.4.1.4413.1.1.1.2.8.23.10.1.4 | IpAddress | RC | ||||||||||||||||||
column · IpAddress · read-create · current IP address match value for the DHCP SNOOPING Binding. | |||||||||||||||||||||
| CagentStaticDsBindingRowStatus | 1.3.6.1.4.1.4413.1.1.1.2.8.23.10.1.5 | RowStatus | RC | ||||||||||||||||||
column · RowStatus · read-create · current The status of this conceptual row. active(1) - this DHCP SNOOPING Binding is active createAndGo(4) - set to this value to create an instance destroy(6) - set to this value to delete an instance | |||||||||||||||||||||
| TagentDynamicDsBindingTable | 1.3.6.1.4.1.4413.1.1.1.2.8.23.11 | NA | |||||||||||||||||||
table · not-accessible · current A table of the DHCP SNOOPING Dynamic entries | |||||||||||||||||||||
| RagentDynamicDsBindingEntry | 1.3.6.1.4.1.4413.1.1.1.2.8.23.11.1 | NA | |||||||||||||||||||
row · not-accessible · current Represents a binding in DHCP SNOOPING table | |||||||||||||||||||||
| CagentDynamicDsBindingIfIndex | 1.3.6.1.4.1.4413.1.1.1.2.8.23.11.1.1 | InterfaceIndex | RO | 1 | |||||||||||||||||
column · InterfaceIndex · read-only · current Interface on which this DHCP SNOOPING binding is going to be added. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CagentDynamicDsBindingVlanId | 1.3.6.1.4.1.4413.1.1.1.2.8.23.11.1.2 | VlanIndex | RO | 2 | |||||||||||||||||
column · VlanIndex · read-only · current VLAN to whcig this DHCP SNOOPING binding is going to be added. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CagentDynamicDsBindingMacAddr | 1.3.6.1.4.1.4413.1.1.1.2.8.23.11.1.3 | MacAddress | RO | 00:0c:6c:0a:fd:6d | |||||||||||||||||
column · MacAddress · read-only · current MAC address match value for the DHCP SNOOPING Binding. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CagentDynamicDsBindingIpAddr | 1.3.6.1.4.1.4413.1.1.1.2.8.23.11.1.4 | IpAddress | RO | 192.168.100.80 | |||||||||||||||||
column · IpAddress · read-only · current IP address match value for the DHCP SNOOPING Binding. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CagentDynamicDsBindingLeaseRemainingTime | 1.3.6.1.4.1.4413.1.1.1.2.8.23.11.1.5 | TimeTicks | RO | 239326100 (27d 16h 47m 41s) | |||||||||||||||||
column · TimeTicks · read-only · current This specifies the period for which the DHCP SNOOPING Binding is valid. Example values from LibreNMS test devices
| |||||||||||||||||||||
| SagentDhcpSnoopingRemoteFileName | 1.3.6.1.4.1.4413.1.1.1.2.8.23.12 | DisplayString (SIZE (1..255)) | RW | ||||||||||||||||||
scalar · DisplayString (SIZE (1..255)) · read-write · current This object indicates the file name on the remote machine to save the DHCP Snooping bindings. This will be set only when we have a valid remote IP. | |||||||||||||||||||||
| SagentDhcpSnoopingRemoteIpAddr | 1.3.6.1.4.1.4413.1.1.1.2.8.23.13 | IpAddress | RW | ||||||||||||||||||
scalar · IpAddress · read-write · current This object indicates the IP address of the remote machine to save the DHCP Snooping bindings. This will be set only when we have a valid file name. | |||||||||||||||||||||
| SagentDhcpSnoopingStoreInterval | 1.3.6.1.4.1.4413.1.1.1.2.8.23.14 | Unsigned32 | RW | ||||||||||||||||||
scalar · Unsigned32 · read-write · current This object indicates the perodic time interval to save the DHCP Snooping bindings. | |||||||||||||||||||||
| NagentDhcpL2RelayConfigGroup | 1.3.6.1.4.1.4413.1.1.1.2.8.24 | ||||||||||||||||||||
| SagentDhcpL2RelayAdminMode | 1.3.6.1.4.1.4413.1.1.1.2.8.24.1 | TruthValue | RW | ||||||||||||||||||
scalar · TruthValue · read-write · current This object indicates whether DHCP L2 Relay is enabled globally. If this object is set to 'true',admin mode is enabled globally. If this object is set to 'false',admin mode is disabled globally. | |||||||||||||||||||||
| TagentDhcpL2RelayIfConfigTable | 1.3.6.1.4.1.4413.1.1.1.2.8.24.2 | NA | |||||||||||||||||||
table · not-accessible · current A table provides the mechanism to enable/disable and configure the trust state for DHCP L2Relay purpose at each physical interface capable of this feature. | |||||||||||||||||||||
| RagentDhcpL2RelayIfConfigEntry | 1.3.6.1.4.1.4413.1.1.1.2.8.24.2.1 | NA | |||||||||||||||||||
row · not-accessible · current A row instance contains the configuration for DHCP L2 Relay at each physical interface capable of this feature.
| |||||||||||||||||||||
| CagentDhcpL2RelayIfEnable | 1.3.6.1.4.1.4413.1.1.1.2.8.24.2.1.1 | TruthValue | RW | ||||||||||||||||||
column · TruthValue · read-write · current This object indicates whether the DHCP L2Relay is enabled or not | |||||||||||||||||||||
| CagentDhcpL2RelayIfTrustEnable | 1.3.6.1.4.1.4413.1.1.1.2.8.24.2.1.2 | TruthValue | RW | ||||||||||||||||||
column · TruthValue · read-write · current This object indicates whether the interface is trusted for DHCP L2 Relay purpose. | |||||||||||||||||||||
| TagentDhcpL2RelayVlanConfigTable | 1.3.6.1.4.1.4413.1.1.1.2.8.24.3 | NA | |||||||||||||||||||
table · not-accessible · current A table provides the mechanism to control DHCP L2 Relay per VLAN. When a VLAN is created in a device supporting this table, a corresponding entry of this table will be added. | |||||||||||||||||||||
| RagentDhcpL2RelayVlanConfigEntry | 1.3.6.1.4.1.4413.1.1.1.2.8.24.3.1 | NA | |||||||||||||||||||
row · not-accessible · current A row instance contains the configuration for DHCP L2 Relay at each existing VLAN. | |||||||||||||||||||||
| CagentDhcpL2RelayVlanIndex | 1.3.6.1.4.1.4413.1.1.1.2.8.24.3.1.1 | VlanIndex | NA | ||||||||||||||||||
column · VlanIndex · not-accessible · current This object indicates the VLAN number on which DHCP L2 Relay feature is configured. | |||||||||||||||||||||
| CagentDhcpL2RelayVlanEnable | 1.3.6.1.4.1.4413.1.1.1.2.8.24.3.1.2 | TruthValue | RW | ||||||||||||||||||
column · TruthValue · read-write · current This object indicates whether DHCP L2 Relay is enabled in this VLAN. If this object is set to 'true', DHCP L2 Relay is enabled. If this object is set to 'false', DHCP L2 Relay is disabled. | |||||||||||||||||||||
| CagentDhcpL2RelayCircuitIdVlanEnable | 1.3.6.1.4.1.4413.1.1.1.2.8.24.3.1.3 | TruthValue | RW | ||||||||||||||||||
column · TruthValue · read-write · current This object indicates whether DHCP CircuitId is enabled for L2 relaying in this VLAN. If this object is set to 'true', DHCP CircuitId is enabled. If this object is set to 'false', DHCP CircuitId is disabled. | |||||||||||||||||||||
| CagentDhcpL2RelayRemoteIdVlanEnable | 1.3.6.1.4.1.4413.1.1.1.2.8.24.3.1.4 | DisplayString (SIZE (1..128)) | RW | ||||||||||||||||||
column · DisplayString (SIZE (1..128)) · read-write · current When this object is set with a non-empty string, DHCP RemoteId is enabled for L2 relaying in this VLAN. | |||||||||||||||||||||
| SagentDhcpL2RelayStatsReset | 1.3.6.1.4.1.4413.1.1.1.2.8.24.6 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current Clear the DHCP L2Relay statistics on all ports. A value of reset(1) is used to reset the statistics. A read on this object will always return the value none(0). The value none(0) cannot be forcibly set by the administrator.
| |||||||||||||||||||||
| TagentDhcpL2RelayStatsTable | 1.3.6.1.4.1.4413.1.1.1.2.8.24.7 | NA | |||||||||||||||||||
table · not-accessible · current A table provides the mechanism for statics of DHCP L2 Relay. | |||||||||||||||||||||
| RagentDhcpL2RelayStatsEntry | 1.3.6.1.4.1.4413.1.1.1.2.8.24.7.1 | NA | |||||||||||||||||||
row · not-accessible · current A row instance contains the DHCP L2Relay statistics per interface.
| |||||||||||||||||||||
| CagentDhcpL2RelayUntrustedSrvrMsgsWithOptn82 | 1.3.6.1.4.1.4413.1.1.1.2.8.24.7.1.1 | Counter32 | RO | ||||||||||||||||||
column · Counter32 · read-only · current This object indicates the number of DHCP server messages received with Option-82 field on the untrusted interface. | |||||||||||||||||||||
| CagentDhcpL2RelayUntrustedClntMsgsWithOptn82 | 1.3.6.1.4.1.4413.1.1.1.2.8.24.7.1.2 | Counter32 | RO | ||||||||||||||||||
column · Counter32 · read-only · current This object indicates the number of DHCP client messages received with Option-82 field on the untrusted interface. | |||||||||||||||||||||
| CagentDhcpL2RelayTrustedSrvrMsgsWithoutOptn82 | 1.3.6.1.4.1.4413.1.1.1.2.8.24.7.1.3 | Counter32 | RO | ||||||||||||||||||
column · Counter32 · read-only · current This object indicates the number of DHCP server messages received without Option-82 field on the trusted interface. | |||||||||||||||||||||
| CagentDhcpL2RelayTrustedClntMsgsWithoutOptn82 | 1.3.6.1.4.1.4413.1.1.1.2.8.24.7.1.4 | Counter32 | RO | ||||||||||||||||||
column · Counter32 · read-only · current This object indicates the number of DHCP client messages received without Option-82 field on the trusted interface. | |||||||||||||||||||||
| NagentSwitchVoiceVLANGroup | 1.3.6.1.4.1.4413.1.1.1.2.8.25 | ||||||||||||||||||||
| SagentSwitchVoiceVLANAdminMode | 1.3.6.1.4.1.4413.1.1.1.2.8.25.1 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current This enables or disables Voice VLAN on the system.
| |||||||||||||||||||||
| TagentSwitchVoiceVlanDeviceTable | 1.3.6.1.4.1.4413.1.1.1.2.8.25.2 | NA | |||||||||||||||||||
table · not-accessible · current A table of the Voice Vlan device entries. | |||||||||||||||||||||
| RagentSwitchVoiceVlanDeviceEntry | 1.3.6.1.4.1.4413.1.1.1.2.8.25.2.1 | NA | |||||||||||||||||||
row · not-accessible · current Represents entry for a Voice Device on the interface. | |||||||||||||||||||||
| CagentSwitchVoiceVlanInterfaceNum | 1.3.6.1.4.1.4413.1.1.1.2.8.25.2.1.1 | Integer32 (1..65535) | RO | ||||||||||||||||||
column · Integer32 (1..65535) · read-only · current The interface number of this interface. | |||||||||||||||||||||
| CagentSwitchVoiceVlanDeviceMacAddress | 1.3.6.1.4.1.4413.1.1.1.2.8.25.2.1.2 | MacAddress | RO | ||||||||||||||||||
column · MacAddress · read-only · current The Voice Device Mac address | |||||||||||||||||||||
| NagentSwitchAddressConflictGroup | 1.3.6.1.4.1.4413.1.1.1.2.8.26 | ||||||||||||||||||||
| SagentSwitchAddressConflictDetectionStatus | 1.3.6.1.4.1.4413.1.1.1.2.8.26.1 | INTEGER | RO | ||||||||||||||||||
scalar · INTEGER · read-only · current Displays if an address conflict was detected on the switch since the last reset of the status or the last conflict detection run. Set to 'true' if detected, 'false' otherwise.
| |||||||||||||||||||||
| SagentSwitchAddressConflictDetectionStatusReset | 1.3.6.1.4.1.4413.1.1.1.2.8.26.2 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current Clear the last address conflict detection status in the switch. A value of reset(1) is used to reset the status. A read on this object always returns the value none (0). The value none (0) cannot be forcibly set by the administrator.
| |||||||||||||||||||||
| SagentSwitchLastConflictingIPAddr | 1.3.6.1.4.1.4413.1.1.1.2.8.26.3 | IpAddress | RO | ||||||||||||||||||
scalar · IpAddress · read-only · current The reported conflicting IP address on the switch since the last reset of the conflict detection status or the last conflict detection run. | |||||||||||||||||||||
| SagentSwitchLastConflictingMacAddr | 1.3.6.1.4.1.4413.1.1.1.2.8.26.4 | MacAddress | RO | ||||||||||||||||||
scalar · MacAddress · read-only · current The MAC address of the host corresponding to the reported conflicting IP address on the switch since the last reset of the conflict detection status or the last conflict detection run. | |||||||||||||||||||||
| SagentSwitchLastConflictReportedTime | 1.3.6.1.4.1.4413.1.1.1.2.8.26.5 | TimeTicks | RO | ||||||||||||||||||
scalar · TimeTicks · read-only · current Time since the last address conflict was detected. It is displayed in days, hours, minutes and seconds. It is set to a valid value only when the conflict detection status is 'true'. | |||||||||||||||||||||
| SagentSwitchConflictIPAddr | 1.3.6.1.4.1.4413.1.1.1.2.8.26.6 | IpAddress | AN | ||||||||||||||||||
scalar · IpAddress · accessible-for-notify · current The IP address on the switch reported to have a conflict with another host's IP address. | |||||||||||||||||||||
| SagentSwitchConflictMacAddr | 1.3.6.1.4.1.4413.1.1.1.2.8.26.7 | MacAddress | AN | ||||||||||||||||||
scalar · MacAddress · accessible-for-notify · current The MAC address of the host that has an IP address conflicting with the IP address on the switch. | |||||||||||||||||||||
| SagentSwitchAddressConflictDetectionRun | 1.3.6.1.4.1.4413.1.1.1.2.8.26.8 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current Trigger the action to run the active address conflict detection. A value of run(1) is used to issue the action command. A read on this object always returns the value none(0). The value none (0) cannot be forcibly set by the administrator.
| |||||||||||||||||||||
| NagentSdmPreferConfigEntry | 1.3.6.1.4.1.4413.1.1.1.2.8.27 | ||||||||||||||||||||
| SagentSdmPreferCurrentTemplate | 1.3.6.1.4.1.4413.1.1.1.2.8.27.1 | INTEGER | RO | ||||||||||||||||||
scalar · INTEGER · read-only · current Displays the current active SDM Template.
| |||||||||||||||||||||
| SagentSdmPreferNextTemplate | 1.3.6.1.4.1.4413.1.1.1.2.8.27.2 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current Configures the next active template. It will be active only after the next reboot. To revert to the default template after the next reboot, use the option default(0).
| |||||||||||||||||||||
| NagentSdmTemplateSummaryTable | 1.3.6.1.4.1.4413.1.1.1.2.8.28 | ||||||||||||||||||||
| TagentSdmTemplateTable | 1.3.6.1.4.1.4413.1.1.1.2.8.28.1 | NA | |||||||||||||||||||
table · not-accessible · current Displays Switch Database Management Template Information. | |||||||||||||||||||||
| RagentSdmTemplateEntry | 1.3.6.1.4.1.4413.1.1.1.2.8.28.1.1 | NA | |||||||||||||||||||
| CagentSdmTemplateId | 1.3.6.1.4.1.4413.1.1.1.2.8.28.1.1.1 | INTEGER | NA | ||||||||||||||||||
column · INTEGER · not-accessible · current The SDM Template type this instance is associated with.
| |||||||||||||||||||||
| CagentArpEntries | 1.3.6.1.4.1.4413.1.1.1.2.8.28.1.1.2 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current The maximum number of entries in the IPv4 Address Resolution Protocol (ARP) cache for routing interfaces. | |||||||||||||||||||||
| CagentIPv4UnicastRoutes | 1.3.6.1.4.1.4413.1.1.1.2.8.28.1.1.3 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current The maximum number of IPv4 unicast forwarding table entries. | |||||||||||||||||||||
| CagentIPv6NdpEntries | 1.3.6.1.4.1.4413.1.1.1.2.8.28.1.1.4 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current The maximum number of IPv6 Neighbor Discovery Protocol (NDP) cache entries. | |||||||||||||||||||||
| CagentIPv6UnicastRoutes | 1.3.6.1.4.1.4413.1.1.1.2.8.28.1.1.5 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current The maximum number of IPv6 unicast forwarding table entries. | |||||||||||||||||||||
| CagentEcmpNextHops | 1.3.6.1.4.1.4413.1.1.1.2.8.28.1.1.6 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current The maximum number of Equal cost next hops that can be installed in the IPv4 and IPv6 unicast forwarding tables. | |||||||||||||||||||||
| CagentIPv4MulticastRoutes | 1.3.6.1.4.1.4413.1.1.1.2.8.28.1.1.7 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current The maximum number of IPv4 multicast forwarding table entries. | |||||||||||||||||||||
| CagentIPv6MulticastRoutes | 1.3.6.1.4.1.4413.1.1.1.2.8.28.1.1.8 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current The maximum number of IPv6 multicast forwarding table entries. | |||||||||||||||||||||
| NagentSwitchCutThroughGroup | 1.3.6.1.4.1.4413.1.1.1.2.8.29 | ||||||||||||||||||||
| SagentSwitchCutThroughConfigMode | 1.3.6.1.4.1.4413.1.1.1.2.8.29.1 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current Mode changes are effective from the next reload of the Switch. The cut-through feature may not be present on all switches. Use - agentSwitchCutThroughRunningModeStatus - MIB to check if the feature is present on your switch.
| |||||||||||||||||||||
| SagentSwitchCutThroughRunningModeStatus | 1.3.6.1.4.1.4413.1.1.1.2.8.29.2 | INTEGER | RO | ||||||||||||||||||
scalar · INTEGER · read-only · current This gives the current running mode of the cut-through feature on switch. Note that Mode changes are effective from the next reload of the Switch. so running mode may be different than the configured mode. A value of not-supported(3) means that the feature is not present on the switch.
| |||||||||||||||||||||
| SagentSwitchCutThroughConfiguredModeStatus | 1.3.6.1.4.1.4413.1.1.1.2.8.29.3 | INTEGER | RO | ||||||||||||||||||
scalar · INTEGER · read-only · current This gives the configured mode of cut-through feature on switch. Note that Mode changes are effective from the next reload of the Switch. so running mode may be different than the configured mode. A value of not-supported(3) means that the feature is not present on the switch.
| |||||||||||||||||||||
| NagentPortTypeGroup | 1.3.6.1.4.1.4413.1.1.1.2.8.30 | ||||||||||||||||||||
| NagentPortType40GigBaseX | 1.3.6.1.4.1.4413.1.1.1.2.8.30.1 | ||||||||||||||||||||
node · current X PCS/PMA, unknown PMD. MAU MIB augmentation | |||||||||||||||||||||
| NagentPrivateVlanGroup | 1.3.6.1.4.1.4413.1.1.1.2.8.31 | ||||||||||||||||||||
| TagentPrivateVlanTable | 1.3.6.1.4.1.4413.1.1.1.2.8.31.1 | NA | |||||||||||||||||||
| RagentPrivateVlanEntry | 1.3.6.1.4.1.4413.1.1.1.2.8.31.1.1 | NA | |||||||||||||||||||
row · not-accessible · current
| |||||||||||||||||||||
| CagentPrivateVlanType | 1.3.6.1.4.1.4413.1.1.1.2.8.31.1.1.1 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current Enables vlan for Private Vlan and configures private vlan type.
| |||||||||||||||||||||
| CagentPrivateVlanAssociate | 1.3.6.1.4.1.4413.1.1.1.2.8.31.1.1.2 | VlanList | RW | ||||||||||||||||||
column · VlanList · read-write · current This field lists all the VlanIDs which are associated with the selected vlan. If the selected vlan type is not primary(1), a zero-length bitmask is returned. | |||||||||||||||||||||
| TagentPrivateVlanIntfAssocTable | 1.3.6.1.4.1.4413.1.1.1.2.8.31.2 | NA | |||||||||||||||||||
| RagentPrivateVlanIntfAssocEntry | 1.3.6.1.4.1.4413.1.1.1.2.8.31.2.1 | NA | |||||||||||||||||||
row · not-accessible · current
| |||||||||||||||||||||
| CagentPrivateVlanIntfAssocHostPrimary | 1.3.6.1.4.1.4413.1.1.1.2.8.31.2.1.1 | Integer32 (1..4094) | RW | ||||||||||||||||||
column · Integer32 (1..4094) · read-write · current Configures the primary host vlan association with the interface. This must be configured along with agentPrivateVlanIntfAssocHostSecondary before the association will be operational. NOTE: Both agentPrivateVlanIntfAssocHostPrimary and agentPrivateVlanIntfAssocHostSecondary objects must be specified at the same time. | |||||||||||||||||||||
| CagentPrivateVlanIntfAssocHostSecondary | 1.3.6.1.4.1.4413.1.1.1.2.8.31.2.1.2 | Integer32 (1..4094) | RW | ||||||||||||||||||
column · Integer32 (1..4094) · read-write · current Configures the secondary host vlan association with the interface. This must be configured along with agentPrivateVlanIntfAssocHostPrimary before the association will be operational. NOTE: Both agentPrivateVlanIntfAssocHostPrimary and agentPrivateVlanIntfAssocHostSecondary objects must be specified at the same time. | |||||||||||||||||||||
| CagentPrivateVlanIntfAssocPromiscuousPrimary | 1.3.6.1.4.1.4413.1.1.1.2.8.31.2.1.3 | Integer32 (1..4094) | RW | ||||||||||||||||||
column · Integer32 (1..4094) · read-write · current Configures the primary promiscuous vlan association with the interface. This must be configured along with agentPrivateVlanIntfAssocPromiscuousSecondary before the association will be operational. | |||||||||||||||||||||
| CagentPrivateVlanIntfAssocPromiscuousSecondary | 1.3.6.1.4.1.4413.1.1.1.2.8.31.2.1.4 | VlanList | RW | ||||||||||||||||||
column · VlanList · read-write · current Configures the secondary promiscuous vlan association with the interface. This must be configured along with agentPrivateVlanIntfAssocPromiscuousPrimary before the association will be operational. | |||||||||||||||||||||
| CagentPrivateVlanIntfAssocOperational | 1.3.6.1.4.1.4413.1.1.1.2.8.31.2.1.5 | VlanList | RO | ||||||||||||||||||
column · VlanList · read-only · current Shows the operational private vlans associated with the interface. | |||||||||||||||||||||
| NagentSwitchPrivateGroupConfigGroup | 1.3.6.1.4.1.4413.1.1.1.2.8.32 | ||||||||||||||||||||
| TagentSwitchPrivateGroupTable | 1.3.6.1.4.1.4413.1.1.1.2.8.32.1 | NA | |||||||||||||||||||
table · not-accessible · current The switch's private group mapping table | |||||||||||||||||||||
| RagentSwitchPrivateGroupEntry | 1.3.6.1.4.1.4413.1.1.1.2.8.32.1.1 | NA | |||||||||||||||||||
| CagentSwitchPrivateGroupId | 1.3.6.1.4.1.4413.1.1.1.2.8.32.1.1.1 | Integer32 (0..2147483647) | NA | ||||||||||||||||||
column · Integer32 (0..2147483647) · not-accessible · current The private group id that port belongs to | |||||||||||||||||||||
| CagentSwitchPrivateGroupName | 1.3.6.1.4.1.4413.1.1.1.2.8.32.1.1.2 | DisplayString (SIZE (0..24)) | RC | ||||||||||||||||||
column · DisplayString (SIZE (0..24)) · read-create · current The name of the Private group | |||||||||||||||||||||
| CagentSwitchPrivateGroupMode | 1.3.6.1.4.1.4413.1.1.1.2.8.32.1.1.3 | INTEGER | RC | ||||||||||||||||||
column · INTEGER · read-create · current The mode of port in private group is either isloated or community
| |||||||||||||||||||||
| CagentSwitchPrivateGroupRowStatus | 1.3.6.1.4.1.4413.1.1.1.2.8.32.1.1.4 | RowStatus | RC | ||||||||||||||||||
column · RowStatus · read-create · current Private Group VLAN can only be created through multiple variable bindings taking all the objects of of the AgentSwitchPrivateGroupEntry. Supported values: active(1) - valid entry createAndGo(4) - used to create a new entry destroy(6) - removes the entry | |||||||||||||||||||||
| TagentSwitchPrivateGroupPortTable | 1.3.6.1.4.1.4413.1.1.1.2.8.32.2 | NA | |||||||||||||||||||
table · not-accessible · current The switch's private group portlist mapping table | |||||||||||||||||||||
| RagentSwitchPrivateGroupPortEntry | 1.3.6.1.4.1.4413.1.1.1.2.8.32.2.1 | NA | |||||||||||||||||||
row · not-accessible · current List of ports assigned to private groups. | |||||||||||||||||||||
| CagentSwitchPrivateGroupPortGroupId | 1.3.6.1.4.1.4413.1.1.1.2.8.32.2.1.1 | Integer32 (0..2147483647) | NA | ||||||||||||||||||
column · Integer32 (0..2147483647) · not-accessible · current The private group id that port belongs to | |||||||||||||||||||||
| CagentSwitchPrivateGroupPortGroupName | 1.3.6.1.4.1.4413.1.1.1.2.8.32.2.1.2 | DisplayString (SIZE (0..24)) | RO | ||||||||||||||||||
column · DisplayString (SIZE (0..24)) · read-only · current The name of the Private group | |||||||||||||||||||||
| CagentSwitchPrivateGroupPortPortList | 1.3.6.1.4.1.4413.1.1.1.2.8.32.2.1.3 | PortList | RW | ||||||||||||||||||
column · PortList · read-write · current The list of ports in private group | |||||||||||||||||||||
| NagentDhcpv6SnoopingConfigGroup | 1.3.6.1.4.1.4413.1.1.1.2.8.33 | ||||||||||||||||||||
| SagentDhcpv6SnoopingAdminMode | 1.3.6.1.4.1.4413.1.1.1.2.8.33.1 | TruthValue | RW | ||||||||||||||||||
scalar · TruthValue · read-write · current This object indicates whether DHCPv6 SNOOPING is enabled globally. If this object is set to 'true',admin mode is enabled globally. If this object is set to 'false',admin mode is disabled globally. | |||||||||||||||||||||
| SagentDhcpv6SnoopingVerifyMac | 1.3.6.1.4.1.4413.1.1.1.2.8.33.2 | TruthValue | RW | ||||||||||||||||||
scalar · TruthValue · read-write · current This object indicates whether source Mac address in the received dhcpv6 Message needs to be verified or not. If this object is set to 'true',verifyMac is enabled globally. If this object is set to 'false',verifyMac is disabled globally. | |||||||||||||||||||||
| TagentDhcpv6SnoopingVlanConfigTable | 1.3.6.1.4.1.4413.1.1.1.2.8.33.3 | NA | |||||||||||||||||||
table · not-accessible · current A table provides the mechanism to control DHCPv6 SNOOPING per VLAN. When a VLAN is created in a device supporting this table, a corresponding entry of this table will be added. | |||||||||||||||||||||
| RagentDhcpv6SnoopingVlanConfigEntry | 1.3.6.1.4.1.4413.1.1.1.2.8.33.3.1 | NA | |||||||||||||||||||
row · not-accessible · current A row instance contains the configuration for dhcpv6 SNOOPING at each existing VLAN. | |||||||||||||||||||||
| CagentDhcpv6SnoopingVlanIndex | 1.3.6.1.4.1.4413.1.1.1.2.8.33.3.1.1 | VlanIndex | NA | ||||||||||||||||||
column · VlanIndex · not-accessible · current This object indicates the VLAN number on which DHCPv6 SNOOPING Inspection feature is configured. | |||||||||||||||||||||
| CagentDhcpv6SnoopingVlanEnable | 1.3.6.1.4.1.4413.1.1.1.2.8.33.3.1.2 | TruthValue | RW | ||||||||||||||||||
column · TruthValue · read-write · current This object indicates whether DHCPv6 SNOOPING is enabled in this VLAN. If this object is set to 'true', DHCPv6 SNOOPING is enabled. If this object is set to 'false', DHCPv6 SNOOPING is disabled. | |||||||||||||||||||||
| TagentDhcpv6SnoopingIfConfigTable | 1.3.6.1.4.1.4413.1.1.1.2.8.33.4 | NA | |||||||||||||||||||
table · not-accessible · current A table provides the mechanism to configure the trust state for DHCPv6 SNOOPING purpose at each physical interface capable of this feature. | |||||||||||||||||||||
| RagentDhcpv6SnoopingIfConfigEntry | 1.3.6.1.4.1.4413.1.1.1.2.8.33.4.1 | NA | |||||||||||||||||||
row · not-accessible · current A row instance contains the configuration for DHCPv6 SNOOPING at each physical interface capable of this feature.
| |||||||||||||||||||||
| CagentDhcpv6SnoopingIfTrustEnable | 1.3.6.1.4.1.4413.1.1.1.2.8.33.4.1.1 | TruthValue | RW | ||||||||||||||||||
column · TruthValue · read-write · current This object indicates whether the interface is trusted for DHCPv6 SNOOPING purpose. | |||||||||||||||||||||
| CagentDhcpv6SnoopingIfLogEnable | 1.3.6.1.4.1.4413.1.1.1.2.8.33.4.1.2 | TruthValue | RW | ||||||||||||||||||
column · TruthValue · read-write · current This object indicates whether the Logging needs on DHCPv6 SNOOPING validations or not | |||||||||||||||||||||
| CagentDhcpv6SnoopingIfRateLimit | 1.3.6.1.4.1.4413.1.1.1.2.8.33.4.1.3 | Integer32 (-1 | 0..300) | RW | ||||||||||||||||||
column · Integer32 (-1 | 0..300) · read-write · current This object indicates rate limit value for dhcpv6 Snooping purpose. If the incoming rate of dhcpv6 packets exceeds the value of this object for consecutively burst interval seconds, dhcpv6 packets will be dropped. Value of -1 indicates that there is no rate limit.
| |||||||||||||||||||||
| CagentDhcpv6SnoopingIfBurstInterval | 1.3.6.1.4.1.4413.1.1.1.2.8.33.4.1.4 | Integer32 (-1 | 1..15) | RW | ||||||||||||||||||
column · Integer32 (-1 | 1..15) · read-write · current This object indicates the burst interval value for rate limiting purpose on this interface. Value of -1 indicates that there is no burst interval. | |||||||||||||||||||||
| TagentIpv6sgIfConfigTable | 1.3.6.1.4.1.4413.1.1.1.2.8.33.5 | NA | |||||||||||||||||||
table · not-accessible · current A table provides the mechanism to configure the IPSG at each physical interface capable of this feature. | |||||||||||||||||||||
| RagentIpv6sgIfConfigEntry | 1.3.6.1.4.1.4413.1.1.1.2.8.33.5.1 | NA | |||||||||||||||||||
row · not-accessible · current A row instance contains the configuration for IPSG at each physical interface capable of this feature.
| |||||||||||||||||||||
| CagentIpv6sgIfVerifySource | 1.3.6.1.4.1.4413.1.1.1.2.8.33.5.1.1 | TruthValue | RW | ||||||||||||||||||
column · TruthValue · read-write · current This object indicates whether the interface is enabled for IPv6SG to forward the data based up on source Ip address | |||||||||||||||||||||
| CagentIpv6sgIfPortSecurity | 1.3.6.1.4.1.4413.1.1.1.2.8.33.5.1.2 | TruthValue | RW | ||||||||||||||||||
column · TruthValue · read-write · current This object indicates whether the interface is enabled for IPv6SG to forward the data based up on source mac address in fdb table | |||||||||||||||||||||
| SagentDhcpv6SnoopingStatsReset | 1.3.6.1.4.1.4413.1.1.1.2.8.33.6 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current Clear the DHCPv6 SNOOPING statistics on all ports. A value of reset(1) is used to reset the statistics. A read on this object will always return the value none(0). The value none(0) cannot be forcibly set by the administrator.
| |||||||||||||||||||||
| TagentDhcpv6SnoopingStatsTable | 1.3.6.1.4.1.4413.1.1.1.2.8.33.7 | NA | |||||||||||||||||||
table · not-accessible · current A table provides the mechanism for statics of DHCPv6 SNOOPING. | |||||||||||||||||||||
| RagentDhcpv6SnoopingStatsEntry | 1.3.6.1.4.1.4413.1.1.1.2.8.33.7.1 | NA | |||||||||||||||||||
row · not-accessible · current A row instance contains the DHCPv6 SNOOPING statistics per VLAN.
| |||||||||||||||||||||
| CagentDhcpv6SnoopingMacVerifyFailures | 1.3.6.1.4.1.4413.1.1.1.2.8.33.7.1.1 | Counter32 | RO | ||||||||||||||||||
column · Counter32 · read-only · current This object indicates the number of failure verifications of client mac address with source mac address | |||||||||||||||||||||
| CagentDhcpv6SnoopingInvalidClientMessages | 1.3.6.1.4.1.4413.1.1.1.2.8.33.7.1.2 | Counter32 | RO | ||||||||||||||||||
column · Counter32 · read-only · current This object indicates the number of invalid dhcpv6 release, request and decline messages | |||||||||||||||||||||
| CagentDhcpv6SnoopingInvalidServerMessages | 1.3.6.1.4.1.4413.1.1.1.2.8.33.7.1.3 | Counter32 | RO | ||||||||||||||||||
column · Counter32 · read-only · current This object indicates the number of invalid dhcpv6 server mesaages | |||||||||||||||||||||
| TagentStaticIpv6sgBindingTable | 1.3.6.1.4.1.4413.1.1.1.2.8.33.8 | NA | |||||||||||||||||||
table · not-accessible · current A table of the IPv6SG static entries | |||||||||||||||||||||
| RagentStaticIpv6sgBindingEntry | 1.3.6.1.4.1.4413.1.1.1.2.8.33.8.1 | NA | |||||||||||||||||||
row · not-accessible · current Represents a binding in IPv6SG table | |||||||||||||||||||||
| CagentStaticIpv6sgBindingIfIndex | 1.3.6.1.4.1.4413.1.1.1.2.8.33.8.1.1 | InterfaceIndex | RC | ||||||||||||||||||
column · InterfaceIndex · read-create · current Interface on which this IPv6SG binding is going to be added. | |||||||||||||||||||||
| CagentStaticIpv6sgBindingVlanId | 1.3.6.1.4.1.4413.1.1.1.2.8.33.8.1.2 | VlanIndex | RC | ||||||||||||||||||
column · VlanIndex · read-create · current VLAN to which this IPv6SG binding is going to be added. | |||||||||||||||||||||
| CagentStaticIpv6sgBindingIpAddr | 1.3.6.1.4.1.4413.1.1.1.2.8.33.8.1.3 | Ipv6Address | RC | ||||||||||||||||||
column · Ipv6Address · read-create · current IPv6 address match value for the IPv6SG binding. | |||||||||||||||||||||
| CagentStaticIpv6sgBindingMacAddr | 1.3.6.1.4.1.4413.1.1.1.2.8.33.8.1.4 | MacAddress | RC | ||||||||||||||||||
column · MacAddress · read-create · current MAC address match value for the IPv6SG Binding. | |||||||||||||||||||||
| CagentStaticIpv6sgBindingRowStatus | 1.3.6.1.4.1.4413.1.1.1.2.8.33.8.1.5 | RowStatus | RC | ||||||||||||||||||
column · RowStatus · read-create · current The status of this conceptual row. active(1) - this IPv6SG Binding is active createAndGo(4) - set to this value to create an instance destroy(6) - set to this value to delete an instance | |||||||||||||||||||||
| TagentDynamicIpv6sgBindingTable | 1.3.6.1.4.1.4413.1.1.1.2.8.33.9 | NA | |||||||||||||||||||
table · not-accessible · current A table of the IPv6SG dynamic entries | |||||||||||||||||||||
| RagentDynamicIpv6sgBindingEntry | 1.3.6.1.4.1.4413.1.1.1.2.8.33.9.1 | NA | |||||||||||||||||||
row · not-accessible · current Represents a binding in IPSG table | |||||||||||||||||||||
| CagentDynamicIpv6sgBindingIfIndex | 1.3.6.1.4.1.4413.1.1.1.2.8.33.9.1.1 | InterfaceIndex | RO | ||||||||||||||||||
column · InterfaceIndex · read-only · current Interface on which this IPv6SG binding is added. | |||||||||||||||||||||
| CagentDynamicIpv6sgBindingVlanId | 1.3.6.1.4.1.4413.1.1.1.2.8.33.9.1.2 | VlanIndex | RO | ||||||||||||||||||
column · VlanIndex · read-only · current VLAN to which this IPv6SG binding is going to be added. | |||||||||||||||||||||
| CagentDynamicIpv6sgBindingIpAddr | 1.3.6.1.4.1.4413.1.1.1.2.8.33.9.1.3 | Ipv6Address | RO | ||||||||||||||||||
column · Ipv6Address · read-only · current Sender IPv6 address match value for the IPv6SG binding. | |||||||||||||||||||||
| CagentDynamicIpv6sgBindingMacAddr | 1.3.6.1.4.1.4413.1.1.1.2.8.33.9.1.4 | MacAddress | RO | ||||||||||||||||||
column · MacAddress · read-only · current MAC address match value for the IPv6SG Binding. | |||||||||||||||||||||
| TagentStaticDsv6BindingTable | 1.3.6.1.4.1.4413.1.1.1.2.8.33.10 | NA | |||||||||||||||||||
table · not-accessible · current A table of the DHCPv6 SNOOPING static entries | |||||||||||||||||||||
| RagentStaticDsv6BindingEntry | 1.3.6.1.4.1.4413.1.1.1.2.8.33.10.1 | NA | |||||||||||||||||||
row · not-accessible · current Represents a static binding in DHCPv6 SNOOPING table | |||||||||||||||||||||
| CagentStaticDsv6BindingIfIndex | 1.3.6.1.4.1.4413.1.1.1.2.8.33.10.1.1 | InterfaceIndex | RC | ||||||||||||||||||
column · InterfaceIndex · read-create · current Interface on which this static DHCPv6 SNOOPING binding is going to be added. | |||||||||||||||||||||
| CagentStaticDsv6BindingVlanId | 1.3.6.1.4.1.4413.1.1.1.2.8.33.10.1.2 | VlanId | RC | ||||||||||||||||||
column · VlanId · read-create · current VLAN to which this static DHCPv6 SNOOPING binding is going to be added. | |||||||||||||||||||||
| CagentStaticDsv6BindingMacAddr | 1.3.6.1.4.1.4413.1.1.1.2.8.33.10.1.3 | MacAddress | RC | ||||||||||||||||||
column · MacAddress · read-create · current MAC address match value for the static DHCPv6 SNOOPING Binding. | |||||||||||||||||||||
| CagentStaticDsv6BindingIpAddr | 1.3.6.1.4.1.4413.1.1.1.2.8.33.10.1.4 | Ipv6Address | RC | ||||||||||||||||||
column · Ipv6Address · read-create · current IP address match value for the static DHCPv6 SNOOPING Binding. | |||||||||||||||||||||
| CagentStaticDsv6BindingRowStatus | 1.3.6.1.4.1.4413.1.1.1.2.8.33.10.1.5 | RowStatus | RC | ||||||||||||||||||
column · RowStatus · read-create · current The status of this conceptual row. active(1) - this static DHCPv6 SNOOPING Binding is active createAndGo(4) - set to this value to create an instance destroy(6) - set to this value to delete an instance | |||||||||||||||||||||
| TagentDynamicDsv6BindingTable | 1.3.6.1.4.1.4413.1.1.1.2.8.33.11 | NA | |||||||||||||||||||
table · not-accessible · current A table of the DHCPv6 SNOOPING Dynamic entries | |||||||||||||||||||||
| RagentDynamicDsv6BindingEntry | 1.3.6.1.4.1.4413.1.1.1.2.8.33.11.1 | NA | |||||||||||||||||||
row · not-accessible · current Represents a dynamic binding in DHCPv6 SNOOPING table | |||||||||||||||||||||
| CagentDynamicDsv6BindingIfIndex | 1.3.6.1.4.1.4413.1.1.1.2.8.33.11.1.1 | InterfaceIndex | RO | ||||||||||||||||||
column · InterfaceIndex · read-only · current Interface on which this dynamic DHCPv6 SNOOPING binding is going to be added. | |||||||||||||||||||||
| CagentDynamicDsv6BindingVlanId | 1.3.6.1.4.1.4413.1.1.1.2.8.33.11.1.2 | VlanIndex | RO | ||||||||||||||||||
column · VlanIndex · read-only · current VLAN to which this dynamic DHCPv6 SNOOPING binding is going to be added. | |||||||||||||||||||||
| CagentDynamicDsv6BindingMacAddr | 1.3.6.1.4.1.4413.1.1.1.2.8.33.11.1.3 | MacAddress | RO | ||||||||||||||||||
column · MacAddress · read-only · current MAC address match value for the dynamic DHCPv6 SNOOPING Binding. | |||||||||||||||||||||
| CagentDynamicDsv6BindingIpAddr | 1.3.6.1.4.1.4413.1.1.1.2.8.33.11.1.4 | Ipv6Address | RO | ||||||||||||||||||
column · Ipv6Address · read-only · current IP address match value for the dynamic DHCPv6 SNOOPING Binding. | |||||||||||||||||||||
| CagentDynamicDsv6BindingLeaseRemainingTime | 1.3.6.1.4.1.4413.1.1.1.2.8.33.11.1.5 | TimeTicks | RO | ||||||||||||||||||
column · TimeTicks · read-only · current This specifies the period for which the dynamic DHCPv6 SNOOPING Binding is valid. | |||||||||||||||||||||
| SagentDhcpv6SnoopingRemoteFileName | 1.3.6.1.4.1.4413.1.1.1.2.8.33.12 | DisplayString (SIZE (1..255)) | RW | ||||||||||||||||||
scalar · DisplayString (SIZE (1..255)) · read-write · current This object indicates the file name on the remote machine to save the DHCPv6 Snooping bindings. This will be set only when we have a valid remote IP. | |||||||||||||||||||||
| SagentDhcpv6SnoopingRemoteIpAddr | 1.3.6.1.4.1.4413.1.1.1.2.8.33.13 | IpAddress | RW | ||||||||||||||||||
scalar · IpAddress · read-write · current This object indicates the IP address of the remote machine to save the DHCPv6 Snooping bindings. This will be set only when we have a valid file name. | |||||||||||||||||||||
| SagentDhcpv6SnoopingStoreInterval | 1.3.6.1.4.1.4413.1.1.1.2.8.33.14 | Unsigned32 | RW | ||||||||||||||||||
scalar · Unsigned32 · read-write · current This object indicates the perodic time interval to save the DHCPv6 Snooping bindings. | |||||||||||||||||||||
| TagentSwitchSnoopSSMGroupTable | 1.3.6.1.4.1.4413.1.1.1.2.8.34 | NA | |||||||||||||||||||
table · not-accessible · current The (conceptual) table listing the IP multicast Source Specific Multicast Groups for which there are members on a particular interface and VLAN. | |||||||||||||||||||||
| RagentSwitchSnoopSSMGroupEntry | 1.3.6.1.4.1.4413.1.1.1.2.8.34.1 | NA | |||||||||||||||||||
row · not-accessible · current An entry (conceptual row) in the agentSwitchSnoopSSMGroupTable. | |||||||||||||||||||||
| CagentSwitchSnoopSSMGroupAddressType | 1.3.6.1.4.1.4413.1.1.1.2.8.34.1.1 | InetAddressType | NA | ||||||||||||||||||
column · InetAddressType · not-accessible · current The address type of the agentSwitchSnoopSSMGroupTable entry. This value applies to both the agentSwitchSnoopSSMGroupAddress and the agentSwitchSnoopSSMGroupLastReporter entries. | |||||||||||||||||||||
| CagentSwitchSnoopSSMGroupAddress | 1.3.6.1.4.1.4413.1.1.1.2.8.34.1.2 | InetAddress (SIZE (4 | 16)) | NA | ||||||||||||||||||
column · InetAddress (SIZE (4 | 16)) · not-accessible · current The IP multicast group address for which this entry contains information. The InetAddressType, e.g. IPv4 or IPv6, is identified by the agentSwitchSnoopSSMGroupAddressType variable in the agentSwitchSnoopSSMGroup table. | |||||||||||||||||||||
| CagentSwitchSnoopSSMGroupIfIndex | 1.3.6.1.4.1.4413.1.1.1.2.8.34.1.3 | InterfaceIndex | NA | ||||||||||||||||||
column · InterfaceIndex · not-accessible · current The interface for which this entry contains information for an IP multicast group address. | |||||||||||||||||||||
| CagentSwitchSnoopSSMGroupVlanId | 1.3.6.1.4.1.4413.1.1.1.2.8.34.1.4 | VlanIndex | NA | ||||||||||||||||||
column · VlanIndex · not-accessible · current The VLAN for which this entry contains information for an IP multicast group address. | |||||||||||||||||||||
| CagentSwitchSnoopSSMGroupLastReporter | 1.3.6.1.4.1.4413.1.1.1.2.8.34.1.5 | InetAddress | RO | ||||||||||||||||||
column · InetAddress · read-only · current The IP address of the source of the last membership report received for this IP Multicast group address on this interface and VLAN. The InetAddressType, e.g. IPv4 or IPv6, is identified by the agentSwitchSnoopSSMGroupAddressType variable in the agentSwitchSnoopSSMGroup table. | |||||||||||||||||||||
| CagentSwitchSnoopSSMGroupSourceFilterMode | 1.3.6.1.4.1.4413.1.1.1.2.8.34.1.6 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current The state in which the interface is currently set. The value indicates the relevance of the corresponding source list entries in the SrcList Table (agentSwitchSnoopSSMSrcListTable).
| |||||||||||||||||||||
| TagentSwitchSnoopSSMSrcListTable | 1.3.6.1.4.1.4413.1.1.1.2.8.35 | NA | |||||||||||||||||||
table · not-accessible · current The (conceptual) table listing the Source List entries corresponding to each VLAN, interface and SSM multicast group pair on a MGMD Snooping switch. | |||||||||||||||||||||
| RagentSwitchSnoopSSMSrcListEntry | 1.3.6.1.4.1.4413.1.1.1.2.8.35.1 | NA | |||||||||||||||||||
row · not-accessible · current An entry (conceptual row) in the agentSwitchSnoopSSMSrcListTable. | |||||||||||||||||||||
| CagentSwitchSnoopSSMSrcListAddressType | 1.3.6.1.4.1.4413.1.1.1.2.8.35.1.1 | InetAddressType | NA | ||||||||||||||||||
column · InetAddressType · not-accessible · current The address type of the InetAddress variables in this table. This value applies to the agentSwitchSnoopSSMSrcListHostAddress and agentSwitchSnoopSSMSrcListAddress entries. | |||||||||||||||||||||
| CagentSwitchSnoopSSMSrcListAddress | 1.3.6.1.4.1.4413.1.1.1.2.8.35.1.2 | InetAddress (SIZE (4 | 16)) | NA | ||||||||||||||||||
column · InetAddress (SIZE (4 | 16)) · not-accessible · current The IP multicast group address for which this entry contains information. | |||||||||||||||||||||
| CagentSwitchSnoopSSMSrcListIfIndex | 1.3.6.1.4.1.4413.1.1.1.2.8.35.1.3 | InterfaceIndex | NA | ||||||||||||||||||
column · InterfaceIndex · not-accessible · current The interface for which this entry contains information for an IP multicast group address. | |||||||||||||||||||||
| CagentSwitchSnoopSSMSrcListVlanId | 1.3.6.1.4.1.4413.1.1.1.2.8.35.1.4 | VlanIndex | NA | ||||||||||||||||||
column · VlanIndex · not-accessible · current The VLAN for which this entry contains information for an IP multicast group address. | |||||||||||||||||||||
| CagentSwitchSnoopSSMSrcListHostAddress | 1.3.6.1.4.1.4413.1.1.1.2.8.35.1.5 | InetAddress (SIZE (4 | 16)) | RO | ||||||||||||||||||
column · InetAddress (SIZE (4 | 16)) · read-only · current The host address to which this entry corresponds. The agentSwitchSnoopSSMGroupSourceFilterMode value for this Group address, interface and VLAN indicates whether this Host address is included or excluded. | |||||||||||||||||||||
| TagentSwitchSnoopSSMFDBTable | 1.3.6.1.4.1.4413.1.1.1.2.8.36 | NA | |||||||||||||||||||
table · not-accessible · current MGMD Snooping Source Specific Multicast Forwarding database Table. | |||||||||||||||||||||
| RagentSwitchSnoopSSMFDBEntry | 1.3.6.1.4.1.4413.1.1.1.2.8.36.1 | NA | |||||||||||||||||||
row · not-accessible · current An entry is created by IGMP Snooping for each group learned in the VLAN. | |||||||||||||||||||||
| CagentSwitchSnoopSSMFDBVlanIndex | 1.3.6.1.4.1.4413.1.1.1.2.8.36.1.1 | VlanIndex | NA | ||||||||||||||||||
column · VlanIndex · not-accessible · current This object indicates the VLAN in which the group is learned. | |||||||||||||||||||||
| CagentSwitchSnoopSSMFDBGroupAddressType | 1.3.6.1.4.1.4413.1.1.1.2.8.36.1.2 | InetAddressType | NA | ||||||||||||||||||
column · InetAddressType · not-accessible · current This object indicates IP multicast address type learned by MGMD Snooping. | |||||||||||||||||||||
| CagentSwitchSnoopSSMFDBGroupAddress | 1.3.6.1.4.1.4413.1.1.1.2.8.36.1.3 | InetAddress | NA | ||||||||||||||||||
column · InetAddress · not-accessible · current This object indicates IP multicast address learned by MGMD Snooping. | |||||||||||||||||||||
| CagentSwitchSnoopSSMFDBSourceAddress | 1.3.6.1.4.1.4413.1.1.1.2.8.36.1.4 | InetAddress | NA | ||||||||||||||||||
column · InetAddress · not-accessible · current This object indicates IP Source address learned by MGMD Snooping. | |||||||||||||||||||||
| CagentSwitchSnoopSSMFDBIncludePortList | 1.3.6.1.4.1.4413.1.1.1.2.8.36.1.5 | AgentPortMask | RO | ||||||||||||||||||
column · AgentPortMask · read-only · current This object indicates the set of ports on which MGMD Membership Reports are received for the group indicating interest to receive traffic sent to the group. | |||||||||||||||||||||
| CagentSwitchSnoopSSMFDBExcludePortList | 1.3.6.1.4.1.4413.1.1.1.2.8.36.1.6 | AgentPortMask | RO | ||||||||||||||||||
column · AgentPortMask · read-only · current This object indicates the set of ports on which MGMD Membership Reports are received for the group indicating interest to not to receive traffic sent to the group. | |||||||||||||||||||||
| TagentSwitchportConfigTable | 1.3.6.1.4.1.4413.1.1.1.2.8.37 | NA | |||||||||||||||||||
| RagentSwitchportConfigEntry | 1.3.6.1.4.1.4413.1.1.1.2.8.37.1 | NA | |||||||||||||||||||
row · not-accessible · current | |||||||||||||||||||||
| CagentSwitchportIntfIndex | 1.3.6.1.4.1.4413.1.1.1.2.8.37.1.1 | Integer32 (1..65535) | RO | ||||||||||||||||||
column · Integer32 (1..65535) · read-only · current The port or LAG number to be selected. Each port/LAG maps to an interface. | |||||||||||||||||||||
| CagentSwitchportMode | 1.3.6.1.4.1.4413.1.1.1.2.8.37.1.2 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current Configure the VLAN membership mode of a port.
| |||||||||||||||||||||
| CagentSwitchportAccessVlanID | 1.3.6.1.4.1.4413.1.1.1.2.8.37.1.3 | VlanIndex | RW | ||||||||||||||||||
column · VlanIndex · read-write · current Configures the Access VLAN Id for the interface. | |||||||||||||||||||||
| CagentSwitchportTrunkNativeVlanID | 1.3.6.1.4.1.4413.1.1.1.2.8.37.1.4 | VlanIndex | RW | ||||||||||||||||||
column · VlanIndex · read-write · current Configures the Native VLAN Id for the interface. | |||||||||||||||||||||
| CagentSwitchportTrunkNativeVlanTagging | 1.3.6.1.4.1.4413.1.1.1.2.8.37.1.5 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Describes the Native VLAN tagging for the interface. 'disable' mean that packets marked with Native VLAN are transmitted untagged from Trunk port.
| |||||||||||||||||||||
| CagentSwitchportTrunkAllowedVlanList | 1.3.6.1.4.1.4413.1.1.1.2.8.37.1.6 | VlanList | RW | ||||||||||||||||||
column · VlanList · read-write · current Configures the allowed VLAN list of Trunk switch interface. | |||||||||||||||||||||
| CagentSwitchportGeneralUntaggedVlanList | 1.3.6.1.4.1.4413.1.1.1.2.8.37.1.7 | VlanList | RO | ||||||||||||||||||
column · VlanList · read-only · current Shows the allowed untagged VLAN list of general switch interface. | |||||||||||||||||||||
| CagentSwitchportGeneralTaggedVlanList | 1.3.6.1.4.1.4413.1.1.1.2.8.37.1.8 | VlanList | RO | ||||||||||||||||||
column · VlanList · read-only · current Shows the allowed tagged VLAN list of general switch interface. | |||||||||||||||||||||
| CagentSwitchportGeneralForbiddenVlanList | 1.3.6.1.4.1.4413.1.1.1.2.8.37.1.9 | VlanList | RO | ||||||||||||||||||
column · VlanList · read-only · current Shows the Forbidden VLAN list of general switch interface. | |||||||||||||||||||||
| CagentSwitchportGeneralDynamicallyAddedVlanList | 1.3.6.1.4.1.4413.1.1.1.2.8.37.1.10 | VlanList | RO | ||||||||||||||||||
column · VlanList · read-only · current Shows the list of dynamically added VLANs for general switch interface. | |||||||||||||||||||||
| NagentTransferConfigGroup | 1.3.6.1.4.1.4413.1.1.1.2.9 | ||||||||||||||||||||
| NagentTransferUploadGroup | 1.3.6.1.4.1.4413.1.1.1.2.9.1 | ||||||||||||||||||||
| SagentTransferUploadMode | 1.3.6.1.4.1.4413.1.1.1.2.9.1.1 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current Transfer upload mode configures the mode to use when uploading from the switch. The mode is either X/Y/ZMODEM, TFTP, SFTP or SCP. X/Y/ZMODEM is valid only when the file transfer is initiated by the serial EIA 232 port. SFTP and SCP are only allowed if the SSH feature is present. Upload to USB is allowed only if the USB feature is present.
| |||||||||||||||||||||
| SagentTransferUploadServerIP | 1.3.6.1.4.1.4413.1.1.1.2.9.1.2 | IpAddress | RW | deprecated | |||||||||||||||||
scalar · IpAddress · read-write · deprecated Transfer upload server IP configures the IP address of the server where the file is located. It is valid only when the Transfer Mode is TFTP, SFTP, or SCP. The address is 4 integer bytes ranging from 0 to 255. This object is deprecated in favour of agentTransferUploadServerAddress and agentTransferUploadServerAddressType. | |||||||||||||||||||||
| SagentTransferUploadPath | 1.3.6.1.4.1.4413.1.1.1.2.9.1.3 | DisplayString (SIZE (0..31)) | RW | ||||||||||||||||||
scalar · DisplayString (SIZE (0..31)) · read-write · current Transfer upload path configures the directory path where the file is to be uploaded to. The switch remembers the last file path used. | |||||||||||||||||||||
| SagentTransferUploadFilename | 1.3.6.1.4.1.4413.1.1.1.2.9.1.4 | DisplayString (SIZE (0..31)) | RW | ||||||||||||||||||
scalar · DisplayString (SIZE (0..31)) · read-write · current Transfer upload filename configures the file name for the file being uploaded from the switch. It can be up to 31 alphanumeric characters. The switch remembers the last file name used. File path can be appended to the file name if the string is less than 17 characters. Otherwise, the File Path field will need to be used and the File Name will be appended to the File Path as is. An example would be File Path set to c:\tftp\scripts\ and File Name set to script2.scr. Note: File Name, File Path, and Server IP Address are applicable only if the Transfer Mode is TFTP, SFTP or SCP and object agentTransferUploadDataType is not set to type code. | |||||||||||||||||||||
| SagentTransferUploadDataType | 1.3.6.1.4.1.4413.1.1.1.2.9.1.5 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current Transfer upload datatype configures the type of file to upload from the switch. The types for upload are: - Configuration File - Error log - Message log - Trap log - Banner File - Code - Language Pack file - Captured CPU packets file - Startup Config file - Backup Config file - Factory Default Config file - Config Script file - Startup Log file - Operational Log file - Crash Log File - Tech Support File
| |||||||||||||||||||||
| SagentTransferUploadStart | 1.3.6.1.4.1.4413.1.1.1.2.9.1.6 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current Transfer upload start will start an upload transfer.
The agentTransferUploadMode object must not be set to xmodem(2),
ymodem(3), or zmodem(4) to initiate a transfer via SNMP.
| |||||||||||||||||||||
| SagentTransferUploadStatus | 1.3.6.1.4.1.4413.1.1.1.2.9.1.7 | INTEGER | RO | ||||||||||||||||||
scalar · INTEGER · read-only · current Indicates the current status of an upload transfer.
| |||||||||||||||||||||
| SagentTransferUploadServerAddressType | 1.3.6.1.4.1.4413.1.1.1.2.9.1.8 | InetAddressType | RW | ||||||||||||||||||
scalar · InetAddressType · read-write · current The type of the serverip address, as defined in the InetAddress MIB. The agentTransferUploadServerAddress object is intepreted within the context of agentTransferUploadServerAddressType | |||||||||||||||||||||
| SagentTransferUploadServerAddress | 1.3.6.1.4.1.4413.1.1.1.2.9.1.9 | InetAddress | RW | ||||||||||||||||||
scalar · InetAddress · read-write · current Transfer upload serverip configures the IP address of the server where the file is to be uploaded to.It is valid only when the Transfer Mode is TFTP, SFTP or SCP. The type of this address is determined by the value of the agentTransferUploadServerAddressType object. The values for agentTransferUploadServerAddressType and agentTransferUploadServerAddress must be consistent. | |||||||||||||||||||||
| SagentTransferUploadImagename | 1.3.6.1.4.1.4413.1.1.1.2.9.1.10 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current Transfer upload image name. Sets the image to be uploaded as the specified name. Imagename cannot be set to unknown(1) option. When no name is set this object returns unknown(1) by default. Note: Imagename, File Name, File Path, and Server IP Address are applicable only if the Transfer Mode is TFTP, SFTP or SCP.
| |||||||||||||||||||||
| SagentTransferUploadUsername | 1.3.6.1.4.1.4413.1.1.1.2.9.1.11 | DisplayString (SIZE (0..32)) | RW | ||||||||||||||||||
scalar · DisplayString (SIZE (0..32)) · read-write · current Username applicable to secure upload types, i.e., SFTP or SCP and FTP. | |||||||||||||||||||||
| SagentTransferUploadPassword | 1.3.6.1.4.1.4413.1.1.1.2.9.1.12 | DisplayString (SIZE (0..64)) | RW | ||||||||||||||||||
scalar · DisplayString (SIZE (0..64)) · read-write · current Password applicable to secure upload types, i.e. SFTP or SCP and FTP. | |||||||||||||||||||||
| SagentTransferUploadRemoteFilename | 1.3.6.1.4.1.4413.1.1.1.2.9.1.14 | DisplayString (SIZE (0..31)) | RW | ||||||||||||||||||
scalar · DisplayString (SIZE (0..31)) · read-write · current Transfer upload remote filename configures the file name for the file being created remotely. It can be up to 31 alphanumeric characters. Note: File Name, File Path, and Server IP Address are applicable only if the Transfer Mode is TFTP, SFTP or SCP. | |||||||||||||||||||||
| NagentTransferDownloadGroup | 1.3.6.1.4.1.4413.1.1.1.2.9.2 | ||||||||||||||||||||
| SagentTransferDownloadMode | 1.3.6.1.4.1.4413.1.1.1.2.9.2.1 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current Transfer download mode configures the mode to use when downloading to the switch. The mode is either X/Y/ZMODEM, TFTP, FTP, SFTP or SCP. X/Y/ZMODEM is valid only when the file transfer is initiated by the serial EIA 232 port. SFTP and SCP are only allowed if the SSH feature is present. Download from USB is only allowed if the USB feature is present.
| |||||||||||||||||||||
| SagentTransferDownloadServerIP | 1.3.6.1.4.1.4413.1.1.1.2.9.2.2 | IpAddress | RW | deprecated | |||||||||||||||||
scalar · IpAddress · read-write · deprecated Transfer download serverip configures the IP address of the server where the file is located. It is valid only when the Transfer Mode is TFTP, SFTP or SCP. The address is 4 integer bytes ranging from 0 to 255. This object is deprecated in favour of agentTransferDownloadServerAddress and agentTransferDownloadServerAddressType. | |||||||||||||||||||||
| SagentTransferDownloadPath | 1.3.6.1.4.1.4413.1.1.1.2.9.2.3 | DisplayString (SIZE (0..160)) | RW | ||||||||||||||||||
scalar · DisplayString (SIZE (0..160)) · read-write · current Transfer download path configures the directory path where the file is located. The switch remembers the last file path used. | |||||||||||||||||||||
| SagentTransferDownloadFilename | 1.3.6.1.4.1.4413.1.1.1.2.9.2.4 | DisplayString (SIZE (0..31)) | RW | ||||||||||||||||||
scalar · DisplayString (SIZE (0..31)) · read-write · current Transfer download filename configures the file name for the file being downloaded to the switch. It can be up to 31 alphanumeric characters. The switch remembers the last file name used. File path can be appended to the file name if the string is less than 32 characters. Otherwise, the File Path field will need to be used and the File Name will be appended to the File Path as is. An example would be File Path set to c:\tftp\scripts\ and File Name set to script1.scr. Note: File Name, File Path, and Server IP Address are applicable only if the Transfer Mode is TFTP, SFTP or SCP and the object agentTransferDownloadDataType download type is not set to code | |||||||||||||||||||||
| SagentTransferDownloadDataType | 1.3.6.1.4.1.4413.1.1.1.2.9.2.5 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current Transfer download datatype configures the type of file to download to the switch. The types for download are: code - Code File config - Configuration File sshkey-rsa1 - SSH-1 RSA Key File sshkey-rsa2 - SSH-2 RSA Key PEM File sshkey-dsa - SSH-2 DSA Key PEM File sslpem-root - SSL Trusted Root Certificate PEM File sslpem-server - SSL Server Certificate PEM File sslpem-dhweak - SSL DH Weak Encryption Parameter PEM File sslpem-dhstrong - SSL DH Strong Encryption Parameter PEM File cli-banner - CLI Banner File kernel - Kernel File lang-pack - Language Pack File. Ias-users - IAS user file startup-config - Startup Config File backup-config - Backup Config File factory-default-config - Factory Default Config File config-script - Config Script File publickey-image - Public key for image digital signature validation publickey-script - Public key for script digital signature validation Note: SSH Key files can only be downloaded if SSH Server is administratively disabled, and there are no active SSH sessions. Kernel file can be downloaded only on raptor platform and linux operating system. Language pack file is used when NLS localization feature is available.
| |||||||||||||||||||||
| SagentTransferDownloadStart | 1.3.6.1.4.1.4413.1.1.1.2.9.2.6 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current Transfer download start will start an download transfer.
The agentTransferDownloadMode object must not be set to xmodem(2),
ymodem(3), or zmodem(4) to initiate a transfer via SNMP.
| |||||||||||||||||||||
| SagentTransferDownloadStatus | 1.3.6.1.4.1.4413.1.1.1.2.9.2.7 | INTEGER | RO | ||||||||||||||||||
scalar · INTEGER · read-only · current Indicates the current status of an download transfer.
| |||||||||||||||||||||
| SagentTransferDownloadServerAddressType | 1.3.6.1.4.1.4413.1.1.1.2.9.2.8 | InetAddressType | RW | ||||||||||||||||||
scalar · InetAddressType · read-write · current The type of the serverip address, as defined in the InetAddress MIB. The agentTransferDownloadServerAddress object is intepreted within the context of agentTransferDownloadServerAddressType | |||||||||||||||||||||
| SagentTransferDownloadServerAddress | 1.3.6.1.4.1.4413.1.1.1.2.9.2.9 | InetAddress | RW | ||||||||||||||||||
scalar · InetAddress · read-write · current Transfer download serverip configures the IP address of the server where the file is to be downloaded from.It is valid only when the Transfer Mode is TFTP, SFTP, or SCP. The type of this address is determined by the value of the agentTransferDownloadServerAddressType object. The values for agentTransferDownloadServerAddressType and agentTransferDownloadServerAddress must be consistent. | |||||||||||||||||||||
| SagentTransferDownloadImagename | 1.3.6.1.4.1.4413.1.1.1.2.9.2.10 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current Transfer download image name. Sets the downloaded image as the specified name. Imagename cannot be set to unknown(1) option. When no name is set this object returns unknown(1) by default. Note: Imagename, File Name, File Path, and Server IP Address are applicable only if the Transfer Mode is TFTP, SFTP or SCP.
| |||||||||||||||||||||
| SagentTransferDownloadUsername | 1.3.6.1.4.1.4413.1.1.1.2.9.2.11 | DisplayString (SIZE (0..32)) | RW | ||||||||||||||||||
scalar · DisplayString (SIZE (0..32)) · read-write · current Username applicable to secure download types, i.e., SFTP or SCP and FTP. | |||||||||||||||||||||
| SagentTransferDownloadPassword | 1.3.6.1.4.1.4413.1.1.1.2.9.2.12 | DisplayString (SIZE (0..64)) | RW | ||||||||||||||||||
scalar · DisplayString (SIZE (0..64)) · read-write · current Password applicable to secure download types, i.e. SFTP or SCP and FTP. | |||||||||||||||||||||
| SagentTransferDownloadRemoteFilename | 1.3.6.1.4.1.4413.1.1.1.2.9.2.13 | DisplayString (SIZE (0..31)) | RW | ||||||||||||||||||
scalar · DisplayString (SIZE (0..31)) · read-write · current Transfer download remote filename configures the file name for the file being transferred from remote system. It can be up to 31 alphanumeric characters. | |||||||||||||||||||||
| SagentTransferDownloadDigitalSignatureVerifySelect | 1.3.6.1.4.1.4413.1.1.1.2.9.2.14 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current Set the option to perform Digital signature validation of downloading file The following options are supported none - Based on config option do the digital signature validation verify - Verify the digital signature of downloading file noverify - Do not verify the digital signature of downloading file
| |||||||||||||||||||||
| NagentImageConfigGroup | 1.3.6.1.4.1.4413.1.1.1.2.9.3 | ||||||||||||||||||||
| SagentImage1 | 1.3.6.1.4.1.4413.1.1.1.2.9.3.1 | DisplayString (SIZE (1..32)) | RO | ||||||||||||||||||
scalar · DisplayString (SIZE (1..32)) · read-only · current The image1 software version . | |||||||||||||||||||||
| SagentImage2 | 1.3.6.1.4.1.4413.1.1.1.2.9.3.2 | DisplayString (SIZE (1..32)) | RO | ||||||||||||||||||
scalar · DisplayString (SIZE (1..32)) · read-only · current The image2 software version. | |||||||||||||||||||||
| SagentActiveImage | 1.3.6.1.4.1.4413.1.1.1.2.9.3.3 | DisplayString (SIZE (1..32)) | RO | ||||||||||||||||||
scalar · DisplayString (SIZE (1..32)) · read-only · current The active image name. image1 or image2. | |||||||||||||||||||||
| SagentNextActiveImage | 1.3.6.1.4.1.4413.1.1.1.2.9.3.4 | DisplayString (SIZE (1..32)) | RW | obsolete | |||||||||||||||||
scalar · DisplayString (SIZE (1..32)) · read-write · obsolete The next active image name. user assigns either image1 or image2. | |||||||||||||||||||||
| NagentPortMirroringGroup | 1.3.6.1.4.1.4413.1.1.1.2.10 | ||||||||||||||||||||
| SagentMirroredPortIfIndex | 1.3.6.1.4.1.4413.1.1.1.2.10.1 | Integer32 | RW | obsolete | |||||||||||||||||
scalar · Integer32 · read-write · obsolete IfIndex of the mirrored port | |||||||||||||||||||||
| SagentProbePortIfIndex | 1.3.6.1.4.1.4413.1.1.1.2.10.2 | Integer32 | RW | obsolete | |||||||||||||||||
scalar · Integer32 · read-write · obsolete IfIndex of the probe port | |||||||||||||||||||||
| SagentPortMirroringMode | 1.3.6.1.4.1.4413.1.1.1.2.10.3 | INTEGER | RW | obsolete | |||||||||||||||||
scalar · INTEGER · read-write · obsolete Port mirroring mode: enable - enable mirroring mode disable - disable mirroring mode delete - clear MirroredPort and Probe Port configuration
| |||||||||||||||||||||
| TagentPortMirrorTable | 1.3.6.1.4.1.4413.1.1.1.2.10.4 | NA | |||||||||||||||||||
table · not-accessible · current This table includes entries for each Port Mirroring session. | |||||||||||||||||||||
| RagentPortMirrorEntry | 1.3.6.1.4.1.4413.1.1.1.2.10.4.1 | NA | |||||||||||||||||||
row · not-accessible · current Provides configuration of a Port Mirroring session specifying the destination port, and the source Port Mask, providing a many-to-one mapping. | |||||||||||||||||||||
| CagentPortMirrorSessionNum | 1.3.6.1.4.1.4413.1.1.1.2.10.4.1.1 | Unsigned32 | NA | ||||||||||||||||||
column · Unsigned32 · not-accessible · current The Session number of this mirroring entry. The number of sessions is fixed, and is platform dependant. | |||||||||||||||||||||
| CagentPortMirrorDestinationPort | 1.3.6.1.4.1.4413.1.1.1.2.10.4.1.2 | Unsigned32 | RW | ||||||||||||||||||
column · Unsigned32 · read-write · current The port which traffic from the mirrored ports will be sent to. | |||||||||||||||||||||
| CagentPortMirrorSourcePortMask | 1.3.6.1.4.1.4413.1.1.1.2.10.4.1.3 | AgentPortMask | RW | ||||||||||||||||||
column · AgentPortMask · read-write · current The ports from which traffic will be sent to the destination port. The destination port can not be included in this list of ports. | |||||||||||||||||||||
| CagentPortMirrorAdminMode | 1.3.6.1.4.1.4413.1.1.1.2.10.4.1.4 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current The status of this port mirroring session.
enable(1) - This session is active and all traffic from the source ports
will be mirrored to the destination port.
disable(2) - This session is not active.
delete(3) - Remove the configuration for this Session
| |||||||||||||||||||||
| CagentPortMirrorSourceVlan | 1.3.6.1.4.1.4413.1.1.1.2.10.4.1.5 | Unsigned32 (0 | 2..4093) | RW | ||||||||||||||||||
column · Unsigned32 (0 | 2..4093) · read-write · current The vlan from which traffic will be sent to the destination port. | |||||||||||||||||||||
| CagentPortMirrorRemoteSourceVlan | 1.3.6.1.4.1.4413.1.1.1.2.10.4.1.6 | Unsigned32 (0 | 2..4093) | RW | ||||||||||||||||||
column · Unsigned32 (0 | 2..4093) · read-write · current The remote vlan from which traffic will be sent to the destination port. | |||||||||||||||||||||
| CagentPortMirrorRemoteDestinationVlan | 1.3.6.1.4.1.4413.1.1.1.2.10.4.1.7 | Unsigned32 (0 | 2..4093) | RW | ||||||||||||||||||
column · Unsigned32 (0 | 2..4093) · read-write · current The VLAN that forwards the network traffic to the destination switch. NOTE: In order to set value for the object, need to set values for agentPortMirrorRemoteDestinationVlan and agentPortMirrorReflectorPort objects simultaneously. | |||||||||||||||||||||
| CagentPortMirrorReflectorPort | 1.3.6.1.4.1.4413.1.1.1.2.10.4.1.8 | Unsigned32 | RW | ||||||||||||||||||
column · Unsigned32 · read-write · current The port which traffic from the mirrored ports will be sent to in case of destination being remote VLAN. NOTE: In order to set value for the object, need to set values for agentPortMirrorRemoteDestinationVlan and agentPortMirrorReflectorPort objects simultaneously. | |||||||||||||||||||||
| CagentPortMirrorIpAccessListNumber | 1.3.6.1.4.1.4413.1.1.1.2.10.4.1.10 | Unsigned32 | RW | ||||||||||||||||||
column · Unsigned32 · read-write · current The IP access-list number attached to the port mirroring session. | |||||||||||||||||||||
| CagentPortMirrorMacAccessListNumber | 1.3.6.1.4.1.4413.1.1.1.2.10.4.1.11 | Unsigned32 | RW | ||||||||||||||||||
column · Unsigned32 · read-write · current The MAC access-list number attached to the port mirroring session. | |||||||||||||||||||||
| TagentPortMirrorTypeTable | 1.3.6.1.4.1.4413.1.1.1.2.10.5 | NA | |||||||||||||||||||
table · not-accessible · current This table includes entries for each source port's direction of port mirroring. | |||||||||||||||||||||
| RagentPortMirrorTypeEntry | 1.3.6.1.4.1.4413.1.1.1.2.10.5.1 | NA | |||||||||||||||||||
row · not-accessible · current Provides configuration of a Port Mirroring direction specifying the session of the port mirroring and source port | |||||||||||||||||||||
| CagentPortMirrorTypeSourcePort | 1.3.6.1.4.1.4413.1.1.1.2.10.5.1.1 | Unsigned32 | NA | ||||||||||||||||||
column · Unsigned32 · not-accessible · current The port from which traffic will be sent to the destination port. This port should be a source port in the corresponding session | |||||||||||||||||||||
| CagentPortMirrorTypeType | 1.3.6.1.4.1.4413.1.1.1.2.10.5.1.2 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current The direction of the data to be mirrored on this source port. tx(1) - The data that is transmitted from the source port. rx(2) - The data that is received on the source port. txrx(3) - The data that is transmitted/received from/on the source port
| |||||||||||||||||||||
| SagentPortMirrorRemoteVlan | 1.3.6.1.4.1.4413.1.1.1.2.10.6 | Unsigned32 | RW | obsolete | |||||||||||||||||
scalar · Unsigned32 · read-write · obsolete The VLAN configured as RSPAN VLAN. | |||||||||||||||||||||
| TagentPortMirrorRemoteVlanTable | 1.3.6.1.4.1.4413.1.1.1.2.10.7 | NA | |||||||||||||||||||
table · not-accessible · current A table of the RSPAN VLAN config entries | |||||||||||||||||||||
| RagentPortMirrorRemoteVlanEntry | 1.3.6.1.4.1.4413.1.1.1.2.10.7.1 | NA | |||||||||||||||||||
| CagentPortMirrorRemoteVlanIndex | 1.3.6.1.4.1.4413.1.1.1.2.10.7.1.1 | VlanIndex | RC | ||||||||||||||||||
column · VlanIndex · read-create · current The VLAN which is configured as a remote-span VLAN. | |||||||||||||||||||||
| CagentPortMirrorRemoteVlanRowStatus | 1.3.6.1.4.1.4413.1.1.1.2.10.7.1.2 | RowStatus | RC | ||||||||||||||||||
column · RowStatus · read-create · current The status of this entry. active(1) - the VLAN is configured as a remote-span VLAN createAndGo(4) - add the VLAN as a remote-span VLAN destroy(6) - remove the VLAN from the list of Remote-span VLAN. RSPAN VLAN cannot be removed or changed while it is used with a Monitor session. | |||||||||||||||||||||
| TagentDot3adAggPortTable | 1.3.6.1.4.1.4413.1.1.1.2.12 | NA | |||||||||||||||||||
table · not-accessible · current This table provides 802.3ad link aggregation information for each physical port that is not available through the standard MIB. | |||||||||||||||||||||
| RagentDot3adAggPortEntry | 1.3.6.1.4.1.4413.1.1.1.2.12.1 | NA | |||||||||||||||||||
row · not-accessible · current Information about a table entry. The agentDot3adAggPort identifies the external interface number of the port.
| |||||||||||||||||||||
| CagentDot3adAggPort | 1.3.6.1.4.1.4413.1.1.1.2.12.1.1 | Integer32 (0..2147483647) | RO | ||||||||||||||||||
column · Integer32 (0..2147483647) · read-only · current ifIndex of this physical port | |||||||||||||||||||||
| CagentDot3adAggPortLACPMode | 1.3.6.1.4.1.4413.1.1.1.2.12.1.2 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current Enable/disable 802.3ad LACP on this port
| |||||||||||||||||||||
| TagentPortConfigTable | 1.3.6.1.4.1.4413.1.1.1.2.13 | NA | |||||||||||||||||||
table · not-accessible · current A table of the switch's physical port config entries | |||||||||||||||||||||
| RagentPortConfigEntry | 1.3.6.1.4.1.4413.1.1.1.2.13.1 | NA | |||||||||||||||||||
| CagentPortDot1dBasePort | 1.3.6.1.4.1.4413.1.1.1.2.13.1.1 | Integer32 (1..65535) | RO | ||||||||||||||||||
column · Integer32 (1..65535) · read-only · current The port number of this port. | |||||||||||||||||||||
| CagentPortIfIndex | 1.3.6.1.4.1.4413.1.1.1.2.13.1.2 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current The switch's Port IfIndex | |||||||||||||||||||||
| CagentPortIanaType | 1.3.6.1.4.1.4413.1.1.1.2.13.1.3 | IANAifType | RO | ||||||||||||||||||
column · IANAifType · read-only · current The switch's Port Type | |||||||||||||||||||||
| CagentPortSTPMode | 1.3.6.1.4.1.4413.1.1.1.2.13.1.4 | INTEGER | RW | obsolete | |||||||||||||||||
column · INTEGER · read-write · obsolete The switch's Port Spanning Tree Protocol Mode STP mode values are: dot1d (the default) fast, indicates you want to use the fast spanning tree mode off, indicates the STP mode is turned off for a particular port This object is only supported when the Dot1d Protocol is enabled.
| |||||||||||||||||||||
| CagentPortSTPState | 1.3.6.1.4.1.4413.1.1.1.2.13.1.5 | INTEGER | RO | obsolete | |||||||||||||||||
column · INTEGER · read-only · obsolete The switch's Port Spanning Tree Protocol State. This object is only supported when the Dot1d Protocol is enabled.
| |||||||||||||||||||||
| CagentPortAdminMode | 1.3.6.1.4.1.4413.1.1.1.2.13.1.6 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current The switch's Port Admin Mode
| |||||||||||||||||||||
| CagentPortPhysicalMode | 1.3.6.1.4.1.4413.1.1.1.2.13.1.7 | INTEGER | RW | obsolete | |||||||||||||||||
column · INTEGER · read-write · obsolete The switch's Port Speed Mode. This is the configured physical mode. This object is read-only for gigabit ports
| |||||||||||||||||||||
| CagentPortPhysicalStatus | 1.3.6.1.4.1.4413.1.1.1.2.13.1.8 | INTEGER | RO | obsolete | |||||||||||||||||
column · INTEGER · read-only · obsolete The switch's Port Physical Speed Status. This is the current actual speed.
| |||||||||||||||||||||
| CagentPortLinkTrapMode | 1.3.6.1.4.1.4413.1.1.1.2.13.1.9 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current If enabled, link up and link down traps will be sent for this port.
| |||||||||||||||||||||
| CagentPortClearStats | 1.3.6.1.4.1.4413.1.1.1.2.13.1.10 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current clear stats for this port only
| |||||||||||||||||||||
| CagentPortDefaultType | 1.3.6.1.4.1.4413.1.1.1.2.13.1.11 | OBJECT IDENTIFIER | RW | ||||||||||||||||||
column · OBJECT IDENTIFIER · read-write · current This object identifies the default administrative port type,
to be used in conjunction with the operational port type
denoted by agentPortType.
This object represents the administratively-configured type of
the MAU. If auto-negotiation is not enabled or is not
implemented for this MAU, the value of this object determines
the operational type of the MAU. In this case, a set to this
object will force the MAU into the specified operating mode.
If auto-negotiation is implemented and enabled for this MAU,
the operational type of the MAU is determined by auto-negotiation,
and the value of this object denotes the type to which the MAU
will automatically revert if/when auto-negotiation is later disabled.
The valid values for this object are:
dot3MauType10BaseTHD
dot3MauType10BaseTFD
dot3MauType100BaseTXHD
dot3MauType100BaseTXFD
dot3MauType100BaseFXFD
dot3MauType1000BaseSXFD
dot3MauType1000BaseTFD
dot3MauType1000BaseXFD
dot3MauType10GigBaseX
agentPortType40GigBaseX | |||||||||||||||||||||
| CagentPortType | 1.3.6.1.4.1.4413.1.1.1.2.13.1.12 | OBJECT IDENTIFIER | RO | ||||||||||||||||||
column · OBJECT IDENTIFIER · read-only · current This object identifies the port type. An initial set of MAU types are defined in RFC 2668. The assignment of OBJECT IDENTIFIERs to new types of MAUs is managed by the IANA. If the MAU type is unknown, either a private object identifier, if one exists, or the object identifier unknownMauType OBJECT IDENTIFIER ::= { 0 0 } is returned. Note that unknownMauType is a syntactically valid object identifier, and any conformant implementation of ASN.1 and the BER must be able to generate and recognize this value. This object represents the operational type of the MAU, as determined by either (1) the result of the auto-negotiation function or (2) if auto-negotiation is not enabled or is not implemented for this MAU, by the value of the object agentPortDefaultType, or (3) for the GigE card a value determined by the GBIC connected to the card. In case (2), a set to the object agentPortDefaultType will force the MAU into the new operating mode. The valid values for this object are: dot3MauType10BaseTHD dot3MauType10BaseTFD dot3MauType100BaseTXHD dot3MauType100BaseTXFD dot3MauType100BaseFXFD dot3MauType1000BaseSXFD dot3MauType1000BaseTFD dot3MauType1000BaseXFD dot3MauType10GigBaseX agentPortType40GigBaseX | |||||||||||||||||||||
| CagentPortAutoNegAdminStatus | 1.3.6.1.4.1.4413.1.1.1.2.13.1.13 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current This object identifies the administration status of auto negotiation for this port.
| |||||||||||||||||||||
| CagentPortDot3FlowControlMode | 1.3.6.1.4.1.4413.1.1.1.2.13.1.14 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current Config flowcontrol allows you to enable or disable 802.3x flow control for this port. This value applies to only full-duplex mode ports. Enabling symmetric flow control allows the port to send and receive pause frames. Enabling asymmetric flow control allows the port to receive pause frames but it will not transmit pause frames.
| |||||||||||||||||||||
| CagentPortDVlanTagMode | 1.3.6.1.4.1.4413.1.1.1.2.13.1.15 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current Controls the Double Vlan Tag mode on this port.
| |||||||||||||||||||||
| CagentPortDVlanTagEthertype | 1.3.6.1.4.1.4413.1.1.1.2.13.1.16 | Integer32 (1..65535) | RW | ||||||||||||||||||
column · Integer32 (1..65535) · read-write · current Configures the Double Vlan Tag Ethertype for this port. If this object is supported, ethertype cannot be configured globally for the switch. Commonly used are the Ethertypes for vman tags (34984, or 0x88A8) and dot1q tags (33024, or 0x8100). | |||||||||||||||||||||
| CagentPortDVlanTagCustomerId | 1.3.6.1.4.1.4413.1.1.1.2.13.1.17 | Integer32 | RW | ||||||||||||||||||
column · Integer32 · read-write · current Configures the Customer ID for the Double Vlan Tag for this port. | |||||||||||||||||||||
| CagentPortMaxFrameSizeLimit | 1.3.6.1.4.1.4413.1.1.1.2.13.1.18 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current This object identifies the largest value that can be configured for agentPortMaxFrameSize | |||||||||||||||||||||
| CagentPortMaxFrameSize | 1.3.6.1.4.1.4413.1.1.1.2.13.1.19 | Integer32 | RW | ||||||||||||||||||
column · Integer32 · read-write · current This object identifies the currently configured maximum frame size value for this port. The maximmum value that this object can be set to is the value of agentPortMaxFrameSizeLimit. For Ethernet ports which support 802.1Q vlan tagging, the minimum value that this object can be set to is 1522 | |||||||||||||||||||||
| CagentPortBroadcastControlMode | 1.3.6.1.4.1.4413.1.1.1.2.13.1.20 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current If enabled, broadcast storm recovery will function on this port. When you specify Enable for Broadcast Storm Recovery and the broadcast traffic on this Ethernet port exceeds the configured threshold, the switch blocks (discards) the broadcast traffic.
| |||||||||||||||||||||
| CagentPortBroadcastControlThreshold | 1.3.6.1.4.1.4413.1.1.1.2.13.1.21 | Integer32 (0..14880000) | RW | ||||||||||||||||||
column · Integer32 (0..14880000) · read-write · current Configures the broadcast storm recovery threshold for this port as a percentage of port speed or as an absolute pps rate. | |||||||||||||||||||||
| CagentPortMulticastControlMode | 1.3.6.1.4.1.4413.1.1.1.2.13.1.22 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current If enabled, multicast storm recovery will function on this port. When you specify Enable for Multicast Storm Recovery and the multicast traffic on this Ethernet port exceeds the configured threshold, the switch blocks (discards) the multicast traffic.
| |||||||||||||||||||||
| CagentPortMulticastControlThreshold | 1.3.6.1.4.1.4413.1.1.1.2.13.1.23 | Integer32 (0..14880000) | RW | ||||||||||||||||||
column · Integer32 (0..14880000) · read-write · current Configures the multicast storm recovery threshold for this port as a percentage of port speed or as an absolute pps rate. | |||||||||||||||||||||
| CagentPortUnicastControlMode | 1.3.6.1.4.1.4413.1.1.1.2.13.1.24 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current If enabled, unicast storm recovery will function on this port. When you specify Enable for Unicast Storm Recovery and the unknown unicast traffic on this Ethernet port exceeds the configured threshold, the switch blocks (discards) the unknown unicast traffic.
| |||||||||||||||||||||
| CagentPortUnicastControlThreshold | 1.3.6.1.4.1.4413.1.1.1.2.13.1.25 | Integer32 (0..14880000) | RW | ||||||||||||||||||
column · Integer32 (0..14880000) · read-write · current Configures the unicast storm recovery threshold for this port as a percentage of port speed or as an absolute pps rate. | |||||||||||||||||||||
| CagentPortBroadcastControlThresholdUnit | 1.3.6.1.4.1.4413.1.1.1.2.13.1.26 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current Configures the units of the threshold value to percentage of port speed or absolute packets per second.
| |||||||||||||||||||||
| CagentPortMulticastControlThresholdUnit | 1.3.6.1.4.1.4413.1.1.1.2.13.1.27 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current Configures the units of the threshold value to percentage of port speed or absolute packets per second.
| |||||||||||||||||||||
| CagentPortUnicastControlThresholdUnit | 1.3.6.1.4.1.4413.1.1.1.2.13.1.28 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current Configures the units of the threshold value to percentage of port speed or absolute packets per second.
| |||||||||||||||||||||
| CagentPortVoiceVlanMode | 1.3.6.1.4.1.4413.1.1.1.2.13.1.29 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current Describes and Configures the Port Voice VLAN Mode. This object can only be set to disable(5).
| |||||||||||||||||||||
| CagentPortVoiceVlanID | 1.3.6.1.4.1.4413.1.1.1.2.13.1.30 | Integer32 (1..4093) | RW | ||||||||||||||||||
column · Integer32 (1..4093) · read-write · current Describes and Configures the Port Voice VLAN ID if the Voice Vlan Mode is Vlan ID. | |||||||||||||||||||||
| CagentPortVoiceVlanPriority | 1.3.6.1.4.1.4413.1.1.1.2.13.1.31 | INTEGER (0..7 | 255) | RW | ||||||||||||||||||
column · INTEGER (0..7 | 255) · read-write · current Describes and Configures the Port Voice VLAN Priority if the Voice Vlan Mode is dot1p. A value of 255 indicates that the priority is not configured. | |||||||||||||||||||||
| CagentPortVoiceVlanDataPriorityMode | 1.3.6.1.4.1.4413.1.1.1.2.13.1.32 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current Describes and Configures the Port Voice VLAN Data Priority Mode.
| |||||||||||||||||||||
| CagentPortVoiceVlanOperationalStatus | 1.3.6.1.4.1.4413.1.1.1.2.13.1.33 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Describes the Port Voice VLAN Operational Status.
| |||||||||||||||||||||
| CagentPortVoiceVlanUntagged | 1.3.6.1.4.1.4413.1.1.1.2.13.1.34 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current Describes and Configures the Port Voice VLAN tagging mode.
| |||||||||||||||||||||
| CagentPortVoiceVlanNoneMode | 1.3.6.1.4.1.4413.1.1.1.2.13.1.35 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current Describes and Configures the Port Voice VLAN None mode.
| |||||||||||||||||||||
| CagentPortVoiceVlanDSCP | 1.3.6.1.4.1.4413.1.1.1.2.13.1.36 | Integer32 | RW | ||||||||||||||||||
column · Integer32 · read-write · current Describes and Configures the Port Voice VLAN DSCP value. | |||||||||||||||||||||
| CagentPortVoiceVlanAuthMode | 1.3.6.1.4.1.4413.1.1.1.2.13.1.37 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current Describes and Configures the Port Voice VLAN Authentication mode. Disable means authentication not required for voice devices when dot1x is enabled.
| |||||||||||||||||||||
| CagentPortDot3FlowControlOperStatus | 1.3.6.1.4.1.4413.1.1.1.2.13.1.38 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current This object identifies operational status of the flow control per port.
| |||||||||||||||||||||
| CagentPortSwitchportMode | 1.3.6.1.4.1.4413.1.1.1.2.13.1.45 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current
| |||||||||||||||||||||
| NagentProtocolConfigGroup | 1.3.6.1.4.1.4413.1.1.1.2.14 | ||||||||||||||||||||
| SagentProtocolGroupCreate | 1.3.6.1.4.1.4413.1.1.1.2.14.1 | DisplayString (SIZE (0 | 1..16)) | RW | obsolete | |||||||||||||||||
scalar · DisplayString (SIZE (0 | 1..16)) · read-write · obsolete Set to non-empty string to create a Protocol-Based VLAN group. | |||||||||||||||||||||
| TagentProtocolGroupTable | 1.3.6.1.4.1.4413.1.1.1.2.14.2 | NA | |||||||||||||||||||
table · not-accessible · current A table of the switch's Protocol-based VLAN entries | |||||||||||||||||||||
| RagentProtocolGroupEntry | 1.3.6.1.4.1.4413.1.1.1.2.14.2.1 | NA | |||||||||||||||||||
| CagentProtocolGroupId | 1.3.6.1.4.1.4413.1.1.1.2.14.2.1.1 | Integer32 (0..2147483647) | NA | ||||||||||||||||||
column · Integer32 (0..2147483647) · not-accessible · current Group identifier of the Protocol-based VLAN entry. | |||||||||||||||||||||
| CagentProtocolGroupName | 1.3.6.1.4.1.4413.1.1.1.2.14.2.1.2 | DisplayString (SIZE (0 | 1..16)) | RW | ||||||||||||||||||
column · DisplayString (SIZE (0 | 1..16)) · read-write · current Group name of the Protocol-based VLAN entry. | |||||||||||||||||||||
| CagentProtocolGroupVlanId | 1.3.6.1.4.1.4413.1.1.1.2.14.2.1.3 | Integer32 (0..4093) | RW | ||||||||||||||||||
column · Integer32 (0..4093) · read-write · current VLAN associated with the Protocol-based VLAN entry. Set to 0 to remove. | |||||||||||||||||||||
| CagentProtocolGroupProtocolIP | 1.3.6.1.4.1.4413.1.1.1.2.14.2.1.4 | INTEGER | RW | obsolete | |||||||||||||||||
column · INTEGER · read-write · obsolete The status of the IP protocol association with the Protocol-based VLAN entry.
| |||||||||||||||||||||
| CagentProtocolGroupProtocolARP | 1.3.6.1.4.1.4413.1.1.1.2.14.2.1.5 | INTEGER | RW | obsolete | |||||||||||||||||
column · INTEGER · read-write · obsolete The status of the ARP protocol association with the Protocol-based VLAN entry.
| |||||||||||||||||||||
| CagentProtocolGroupProtocolIPX | 1.3.6.1.4.1.4413.1.1.1.2.14.2.1.6 | INTEGER | RW | obsolete | |||||||||||||||||
column · INTEGER · read-write · obsolete The status of the IPX protocol association with the Protocol-based VLAN entry.
| |||||||||||||||||||||
| CagentProtocolGroupStatus | 1.3.6.1.4.1.4413.1.1.1.2.14.2.1.7 | RowStatus | RC | ||||||||||||||||||
column · RowStatus · read-create · current The status of the Protocol-based VLAN entry. active(1) - this entry is active createAndGo(4) - used to create a new entry destroy(6) - remove this entry | |||||||||||||||||||||
| TagentProtocolGroupPortTable | 1.3.6.1.4.1.4413.1.1.1.2.14.3 | NA | |||||||||||||||||||
table · not-accessible · current A table of the switch's physical port config entries | |||||||||||||||||||||
| RagentProtocolGroupPortEntry | 1.3.6.1.4.1.4413.1.1.1.2.14.3.1 | NA | |||||||||||||||||||
row · not-accessible · current Switch's physical port config entry | |||||||||||||||||||||
| CagentProtocolGroupPortIfIndex | 1.3.6.1.4.1.4413.1.1.1.2.14.3.1.1 | Integer32 (0..2147483647) | RO | ||||||||||||||||||
column · Integer32 (0..2147483647) · read-only · current The interface number of this instance. | |||||||||||||||||||||
| CagentProtocolGroupPortStatus | 1.3.6.1.4.1.4413.1.1.1.2.14.3.1.2 | RowStatus | RC | ||||||||||||||||||
column · RowStatus · read-create · current The status of this entry. active(1) - the port is associated with this group createAndGo(4) - add the port to this group createAndWait(5) - add the port to this group destroy(6) - remove the port from this group | |||||||||||||||||||||
| TagentProtocolGroupProtocolTable | 1.3.6.1.4.1.4413.1.1.1.2.14.4 | NA | |||||||||||||||||||
table · not-accessible · current A table of the switch's physical port config entries | |||||||||||||||||||||
| RagentProtocolGroupProtocolEntry | 1.3.6.1.4.1.4413.1.1.1.2.14.4.1 | NA | |||||||||||||||||||
row · not-accessible · current Switch's physical port config entry | |||||||||||||||||||||
| CagentProtocolGroupProtocolID | 1.3.6.1.4.1.4413.1.1.1.2.14.4.1.1 | Integer32 (1536..65535) | NA | ||||||||||||||||||
column · Integer32 (1536..65535) · not-accessible · current The protocol ID of this instance. The value for IP is 2048 (0x0800), ARP is 2054 (0x0806) and IPX is 33079 (0x8137). Other protocol Ids in the range 1536 to 65535 can also be configured. | |||||||||||||||||||||
| CagentProtocolGroupProtocolStatus | 1.3.6.1.4.1.4413.1.1.1.2.14.4.1.2 | RowStatus | RC | ||||||||||||||||||
column · RowStatus · read-create · current The status of this entry. active(1) - the port is associated with this group createAndGo(4) - add the port to this group createAndWait(5) - add the port to this group destroy(6) - remove the port from this group | |||||||||||||||||||||
| NagentStpSwitchConfigGroup | 1.3.6.1.4.1.4413.1.1.1.2.15 | ||||||||||||||||||||
| SagentStpConfigDigestKey | 1.3.6.1.4.1.4413.1.1.1.2.15.1 | OCTET STRING (SIZE (16)) | RO | ||||||||||||||||||
scalar · OCTET STRING (SIZE (16)) · read-only · current The MST configuration digest key. | |||||||||||||||||||||
| SagentStpConfigFormatSelector | 1.3.6.1.4.1.4413.1.1.1.2.15.2 | Unsigned32 (0..255) | RO | ||||||||||||||||||
scalar · Unsigned32 (0..255) · read-only · current The MST configuration format selector. A value other than 0 (zero) indicates non-support for the IEEE 802.1s standard. | |||||||||||||||||||||
| SagentStpConfigName | 1.3.6.1.4.1.4413.1.1.1.2.15.3 | DisplayString (SIZE (1..32)) | RW | ||||||||||||||||||
scalar · DisplayString (SIZE (1..32)) · read-write · current The MST configuration name of at most 32 characters. | |||||||||||||||||||||
| SagentStpConfigRevision | 1.3.6.1.4.1.4413.1.1.1.2.15.4 | Unsigned32 (0..65535) | RW | ||||||||||||||||||
scalar · Unsigned32 (0..65535) · read-write · current The MST configuration revision. The default value is 1. | |||||||||||||||||||||
| SagentStpForceVersion | 1.3.6.1.4.1.4413.1.1.1.2.15.5 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current The MST configuration force protocol version. The default version is dot1s.
| |||||||||||||||||||||
| SagentStpAdminMode | 1.3.6.1.4.1.4413.1.1.1.2.15.6 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current The spanning tree operational status. enable(1) - enables spanning tree operational status on the switch. disable(2) - disables spanning tree operational status on the switch. The default status is disabled.
| |||||||||||||||||||||
| SagentStpBpduGuardMode | 1.3.6.1.4.1.4413.1.1.1.2.15.7 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current The spanning tree BPDU Guard Mode. enable(1) - enables BPDU Guard Mode on the switch. disable(2) - disables BPDU Guard Mode on the switch. The default status is disabled.
| |||||||||||||||||||||
| SagentStpBpduFilterDefault | 1.3.6.1.4.1.4413.1.1.1.2.15.8 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current The spanning tree BPDU Filter Mode, it enables BPDU Filter on all edge ports. enable(1) - enables BPDU Filter Mode on the switch. disable(2) - disables BPDU Filter Mode on the switch. The default status is disabled.
| |||||||||||||||||||||
| TagentStpPortTable | 1.3.6.1.4.1.4413.1.1.1.2.15.9 | NA | |||||||||||||||||||
table · not-accessible · current STP port table. | |||||||||||||||||||||
| RagentStpPortEntry | 1.3.6.1.4.1.4413.1.1.1.2.15.9.1 | NA | |||||||||||||||||||
| CagentStpPortState | 1.3.6.1.4.1.4413.1.1.1.2.15.9.1.1 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current The administrative STP state for the port. enable(1) - enables STP on the port. disable(2) - disables STP on the port. The default port STP state is enabled for the first 4095 ports and disabled for any ports beyond.
| |||||||||||||||||||||
| CagentStpPortStatsMstpBpduRx | 1.3.6.1.4.1.4413.1.1.1.2.15.9.1.2 | Counter32 | RO | ||||||||||||||||||
column · Counter32 · read-only · current The MSTP BPDUs received on a specific port. | |||||||||||||||||||||
| CagentStpPortStatsMstpBpduTx | 1.3.6.1.4.1.4413.1.1.1.2.15.9.1.3 | Counter32 | RO | ||||||||||||||||||
column · Counter32 · read-only · current The MSTP BPDUs sent from a specific port. | |||||||||||||||||||||
| CagentStpPortStatsRstpBpduRx | 1.3.6.1.4.1.4413.1.1.1.2.15.9.1.4 | Counter32 | RO | ||||||||||||||||||
column · Counter32 · read-only · current The RSTP BPDUs received on a specific port. | |||||||||||||||||||||
| CagentStpPortStatsRstpBpduTx | 1.3.6.1.4.1.4413.1.1.1.2.15.9.1.5 | Counter32 | RO | ||||||||||||||||||
column · Counter32 · read-only · current The RSTP BPDUs sent from a specific port. | |||||||||||||||||||||
| CagentStpPortStatsStpBpduRx | 1.3.6.1.4.1.4413.1.1.1.2.15.9.1.6 | Counter32 | RO | ||||||||||||||||||
column · Counter32 · read-only · current The STP BPDUs received on a specific port. | |||||||||||||||||||||
| CagentStpPortStatsStpBpduTx | 1.3.6.1.4.1.4413.1.1.1.2.15.9.1.7 | Counter32 | RO | ||||||||||||||||||
column · Counter32 · read-only · current The STP BPDUs sent from a specific port. | |||||||||||||||||||||
| CagentStpPortUpTime | 1.3.6.1.4.1.4413.1.1.1.2.15.9.1.8 | TimeTicks | RO | ||||||||||||||||||
column · TimeTicks · read-only · current Time since port was reset. It is displayed in days, hours, minutes, and seconds. | |||||||||||||||||||||
| CagentStpPortMigrationCheck | 1.3.6.1.4.1.4413.1.1.1.2.15.9.1.9 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current Force the specified port to transmit RSTP or MSTP BPDU's. Supported values: false(0) - BPDUs are not to be transmitted. true(1) - BPDUs are to be transmitted A non-zero value indicates that BPDUs are to be sent on the specified port.
| |||||||||||||||||||||
| SagentStpPortHelloTime | 1.3.6.1.4.1.4413.1.1.1.2.15.9.1.10 | Unsigned32 (1..65535) | RW | ||||||||||||||||||
scalar · Unsigned32 (1..65535) · read-write · current The spanning-tree hello time for the specified port. | |||||||||||||||||||||
| NagentStpCstConfigGroup | 1.3.6.1.4.1.4413.1.1.1.2.15.10 | ||||||||||||||||||||
| SagentStpCstHelloTime | 1.3.6.1.4.1.4413.1.1.1.2.15.10.1 | Unsigned32 | RO | ||||||||||||||||||
scalar · Unsigned32 · read-only · current The MSTP root port hello time for the CIST. | |||||||||||||||||||||
| SagentStpCstMaxAge | 1.3.6.1.4.1.4413.1.1.1.2.15.10.2 | Unsigned32 | RO | ||||||||||||||||||
scalar · Unsigned32 · read-only · current The MSTP root port max age for the CIST. | |||||||||||||||||||||
| SagentStpCstRegionalRootId | 1.3.6.1.4.1.4413.1.1.1.2.15.10.3 | OCTET STRING (SIZE (8)) | RO | ||||||||||||||||||
scalar · OCTET STRING (SIZE (8)) · read-only · current The MSTP regional root identifier for the CIST. | |||||||||||||||||||||
| SagentStpCstRegionalRootPathCost | 1.3.6.1.4.1.4413.1.1.1.2.15.10.4 | Unsigned32 | RO | ||||||||||||||||||
scalar · Unsigned32 · read-only · current The MSTP regional root path cost for the CIST. | |||||||||||||||||||||
| SagentStpCstRootFwdDelay | 1.3.6.1.4.1.4413.1.1.1.2.15.10.5 | Unsigned32 | RO | ||||||||||||||||||
scalar · Unsigned32 · read-only · current The MSTP root port forward delay for the CIST. | |||||||||||||||||||||
| SagentStpCstBridgeFwdDelay | 1.3.6.1.4.1.4413.1.1.1.2.15.10.6 | Unsigned32 (4..30) | RW | ||||||||||||||||||
scalar · Unsigned32 (4..30) · read-write · current The MSTP bridge forward delay for the CIST. The default value is 15. | |||||||||||||||||||||
| SagentStpCstBridgeHelloTime | 1.3.6.1.4.1.4413.1.1.1.2.15.10.7 | Unsigned32 (1..10) | RO | ||||||||||||||||||
scalar · Unsigned32 (1..10) · read-only · current The MSTP bridge hello time for the CIST. The default value is 2. According to IEEE 802.1Q-REV 2005 updating hello time is disallowed | |||||||||||||||||||||
| SagentStpCstBridgeHoldTime | 1.3.6.1.4.1.4413.1.1.1.2.15.10.8 | Unsigned32 | RO | ||||||||||||||||||
scalar · Unsigned32 · read-only · current The MSTP bridge hold time for the CIST. | |||||||||||||||||||||
| SagentStpCstBridgeMaxAge | 1.3.6.1.4.1.4413.1.1.1.2.15.10.9 | Unsigned32 (6..40) | RW | ||||||||||||||||||
scalar · Unsigned32 (6..40) · read-write · current The MSTP bridge max age for the CIST. The default value is 20. | |||||||||||||||||||||
| SagentStpCstBridgeMaxHops | 1.3.6.1.4.1.4413.1.1.1.2.15.10.10 | Unsigned32 (6..40) | RW | ||||||||||||||||||
scalar · Unsigned32 (6..40) · read-write · current The MSTP bridge max hops for the CIST. The default value is 20. | |||||||||||||||||||||
| SagentStpCstBridgePriority | 1.3.6.1.4.1.4413.1.1.1.2.15.10.11 | Unsigned32 (0..61440) | RW | ||||||||||||||||||
scalar · Unsigned32 (0..61440) · read-write · current The MSTP bridge priority for the CIST. The default value is 32768. | |||||||||||||||||||||
| SagentStpCstBridgeHoldCount | 1.3.6.1.4.1.4413.1.1.1.2.15.10.12 | Unsigned32 (1..10) | RW | ||||||||||||||||||
scalar · Unsigned32 (1..10) · read-write · current The MSTP bridge hold count for the CIST. This command sets the value of maximum bpdus that a bridge is allowed to send within a hello time window. The default value is 6. | |||||||||||||||||||||
| TagentStpCstPortTable | 1.3.6.1.4.1.4413.1.1.1.2.15.11 | NA | |||||||||||||||||||
table · not-accessible · current CIST port table. | |||||||||||||||||||||
| RagentStpCstPortEntry | 1.3.6.1.4.1.4413.1.1.1.2.15.11.1 | NA | |||||||||||||||||||
| CagentStpCstPortOperEdge | 1.3.6.1.4.1.4413.1.1.1.2.15.11.1.1 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current The MSTP operational status of a specific port for the CIST.
| |||||||||||||||||||||
| CagentStpCstPortOperPointToPoint | 1.3.6.1.4.1.4413.1.1.1.2.15.11.1.2 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current The MSTP operational point to point mac of a specific port for the CIST.
| |||||||||||||||||||||
| CagentStpCstPortTopologyChangeAck | 1.3.6.1.4.1.4413.1.1.1.2.15.11.1.3 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current The MSTP topology change acknowledge for a specific port in the CIST.
| |||||||||||||||||||||
| CagentStpCstPortEdge | 1.3.6.1.4.1.4413.1.1.1.2.15.11.1.4 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current The administrative state of a specific port in CIST. enable(1) - enables the port. disable(2) - disables the port. The default port state is disabled.
| |||||||||||||||||||||
| CagentStpCstPortForwardingState | 1.3.6.1.4.1.4413.1.1.1.2.15.11.1.5 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current The MSTP forwarding state of a specific port in CIST.
| |||||||||||||||||||||
| CagentStpCstPortId | 1.3.6.1.4.1.4413.1.1.1.2.15.11.1.6 | PortId | RO | ||||||||||||||||||
column · PortId · read-only · current The MSTP port identifier of a specific port in CIST. | |||||||||||||||||||||
| CagentStpCstPortPathCost | 1.3.6.1.4.1.4413.1.1.1.2.15.11.1.7 | Unsigned32 (1..200000000) | RW | ||||||||||||||||||
column · Unsigned32 (1..200000000) · read-write · current The MSTP port path cost in CIST. The default value will correspond to the recommendation specified in IEEE 802.1s Table 13-2 which varies depending upon link speed. | |||||||||||||||||||||
| CagentStpCstPortPriority | 1.3.6.1.4.1.4413.1.1.1.2.15.11.1.8 | Unsigned32 (0..240) | RW | ||||||||||||||||||
column · Unsigned32 (0..240) · read-write · current The MSTP port priority in CIST. The priority is in the increments of 16. The default value is 128. | |||||||||||||||||||||
| CagentStpCstDesignatedBridgeId | 1.3.6.1.4.1.4413.1.1.1.2.15.11.1.9 | OCTET STRING (SIZE (8)) | RO | ||||||||||||||||||
column · OCTET STRING (SIZE (8)) · read-only · current The MSTP designated bridge ID of a specific port in CIST. | |||||||||||||||||||||
| CagentStpCstDesignatedCost | 1.3.6.1.4.1.4413.1.1.1.2.15.11.1.10 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current The MSTP designated cost of a specific port in CIST. | |||||||||||||||||||||
| CagentStpCstDesignatedPortId | 1.3.6.1.4.1.4413.1.1.1.2.15.11.1.11 | PortId | RO | ||||||||||||||||||
column · PortId · read-only · current The MSTP designated port ID of a specific port in CIST. | |||||||||||||||||||||
| CagentStpCstExtPortPathCost | 1.3.6.1.4.1.4413.1.1.1.2.15.11.1.12 | Unsigned32 (0..200000000) | RW | ||||||||||||||||||
column · Unsigned32 (0..200000000) · read-write · current The MSTP external port path cost in CIST. The default value varies depending upon the link speed. | |||||||||||||||||||||
| CagentStpCstPortBpduGuardEffect | 1.3.6.1.4.1.4413.1.1.1.2.15.11.1.13 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current BPDU Guard Mode effect on the port. enable(1) - BPDU Guard Mode is enabled on the port. disable(2) - BPDU Guard Mode is disabled on the port.
| |||||||||||||||||||||
| CagentStpCstPortBpduFilter | 1.3.6.1.4.1.4413.1.1.1.2.15.11.1.14 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current This command sets BPDU Filter mode on the port. enable(1) - BPDU Filter Mode is enabled on the port. disable(2) - BPDU Filter Mode is disabled on the port.
| |||||||||||||||||||||
| CagentStpCstPortBpduFlood | 1.3.6.1.4.1.4413.1.1.1.2.15.11.1.15 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current This command sets BPDU Flood mode on the port. enable(1) - BPDU Flood Mode is enabled on the port. disable(2) - BPDU Flood Mode is disabled on the port.
| |||||||||||||||||||||
| CagentStpCstPortAutoEdge | 1.3.6.1.4.1.4413.1.1.1.2.15.11.1.16 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current This command sets the auto-edge mode of the port which enables it to become an edge port if it does not see BPDUs for some duration. enable(1) - enables the auto-edge mode for the port. disable(2) - disables the auto-edge mode for the port. The default auto-edge mode is enabled.
| |||||||||||||||||||||
| CagentStpCstPortRootGuard | 1.3.6.1.4.1.4413.1.1.1.2.15.11.1.17 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current This command sets a port to discard any superior information received by the port and thus protect against root of the device from changing.The port gets put into discarding state and does not forward any packets. enable(1) - enables the root-guard mode for the port. disable(2) - disables the root-guard mode for the port. The default root-guard mode is disabled.
| |||||||||||||||||||||
| CagentStpCstPortTCNGuard | 1.3.6.1.4.1.4413.1.1.1.2.15.11.1.18 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current This command restricts the port from propagating any topology change information received through that port. enable(1) - enables the tcn-guard mode for the port. disable(2) - disables the tcn-guard mode for the port. The default tcn-guard mode is disabled.
| |||||||||||||||||||||
| CagentStpCstPortLoopGuard | 1.3.6.1.4.1.4413.1.1.1.2.15.11.1.19 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current This command enables loop guard on this port. This setting applies to all Spanning Tree instances of which this port is a member. enable(1) - enables the loop guard mode for the port. disable(2) - disables the loop guard mode for the port. The default loop-guard mode is disabled.
| |||||||||||||||||||||
| TagentStpMstTable | 1.3.6.1.4.1.4413.1.1.1.2.15.12 | NA | |||||||||||||||||||
table · not-accessible · current MST table. | |||||||||||||||||||||
| RagentStpMstEntry | 1.3.6.1.4.1.4413.1.1.1.2.15.12.1 | NA | |||||||||||||||||||
| CagentStpMstId | 1.3.6.1.4.1.4413.1.1.1.2.15.12.1.1 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current The MSTP instance ID. | |||||||||||||||||||||
| CagentStpMstBridgePriority | 1.3.6.1.4.1.4413.1.1.1.2.15.12.1.2 | Unsigned32 (0..61440) | RW | ||||||||||||||||||
column · Unsigned32 (0..61440) · read-write · current The MSTP bridge priority in a specific instance. The priority is in the increments of 4096. The recommended default value is 32768. | |||||||||||||||||||||
| CagentStpMstBridgeIdentifier | 1.3.6.1.4.1.4413.1.1.1.2.15.12.1.3 | OCTET STRING (SIZE (8)) | RO | ||||||||||||||||||
column · OCTET STRING (SIZE (8)) · read-only · current The MSTP bridge identifier in a specific instance. | |||||||||||||||||||||
| CagentStpMstDesignatedRootId | 1.3.6.1.4.1.4413.1.1.1.2.15.12.1.4 | OCTET STRING (SIZE (8)) | RO | ||||||||||||||||||
column · OCTET STRING (SIZE (8)) · read-only · current The MSTP designated root bridge identifier in a specific instance. | |||||||||||||||||||||
| CagentStpMstRootPathCost | 1.3.6.1.4.1.4413.1.1.1.2.15.12.1.5 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current The MSTP root path cost in a specific instance. | |||||||||||||||||||||
| CagentStpMstRootPortId | 1.3.6.1.4.1.4413.1.1.1.2.15.12.1.6 | OCTET STRING (SIZE (8)) | RO | ||||||||||||||||||
column · OCTET STRING (SIZE (8)) · read-only · current The MSTP root port ID in a specific instance. | |||||||||||||||||||||
| CagentStpMstTimeSinceTopologyChange | 1.3.6.1.4.1.4413.1.1.1.2.15.12.1.7 | TimeTicks | RO | ||||||||||||||||||
column · TimeTicks · read-only · current The MSTP time since the last topology change in a specific instance. | |||||||||||||||||||||
| CagentStpMstTopologyChangeCount | 1.3.6.1.4.1.4413.1.1.1.2.15.12.1.8 | Counter32 | RO | ||||||||||||||||||
column · Counter32 · read-only · current The MSTP count of topology changes in a specific instance. | |||||||||||||||||||||
| CagentStpMstTopologyChangeParm | 1.3.6.1.4.1.4413.1.1.1.2.15.12.1.9 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current The MSTP topology change parameter in a specific instance.
| |||||||||||||||||||||
| CagentStpMstRowStatus | 1.3.6.1.4.1.4413.1.1.1.2.15.12.1.10 | RowStatus | RC | ||||||||||||||||||
column · RowStatus · read-create · current The MSTP instance status. Supported values: active(1) - valid instance. createAndGo(4) - used to create a new instance. destroy(6) - removes an instance. | |||||||||||||||||||||
| TagentStpMstPortTable | 1.3.6.1.4.1.4413.1.1.1.2.15.13 | NA | |||||||||||||||||||
table · not-accessible · current MST port table. | |||||||||||||||||||||
| RagentStpMstPortEntry | 1.3.6.1.4.1.4413.1.1.1.2.15.13.1 | NA | |||||||||||||||||||
| CagentStpMstPortForwardingState | 1.3.6.1.4.1.4413.1.1.1.2.15.13.1.1 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current The MSTP forwarding state of a specific port in a specific instance.
| |||||||||||||||||||||
| CagentStpMstPortId | 1.3.6.1.4.1.4413.1.1.1.2.15.13.1.2 | OCTET STRING (SIZE (4)) | RO | ||||||||||||||||||
column · OCTET STRING (SIZE (4)) · read-only · current The MSTP port identifier of a specific port in a specific instance. | |||||||||||||||||||||
| CagentStpMstPortPathCost | 1.3.6.1.4.1.4413.1.1.1.2.15.13.1.3 | Unsigned32 (0..200000000) | RW | ||||||||||||||||||
column · Unsigned32 (0..200000000) · read-write · current The MSTP port path cost in a specific instance. The default value will correspond to the recommendation specified in IEEE 802.1s Table 13-2 which varies depending upon link speed. | |||||||||||||||||||||
| CagentStpMstPortPriority | 1.3.6.1.4.1.4413.1.1.1.2.15.13.1.4 | Unsigned32 (0..240) | RW | ||||||||||||||||||
column · Unsigned32 (0..240) · read-write · current The MSTP port priority in a specific instance. The priority is in the increments of 16. The default value is 128. | |||||||||||||||||||||
| CagentStpMstDesignatedBridgeId | 1.3.6.1.4.1.4413.1.1.1.2.15.13.1.5 | OCTET STRING (SIZE (8)) | RO | ||||||||||||||||||
column · OCTET STRING (SIZE (8)) · read-only · current The MSTP designated bridge ID of a specific port in a specific instance. | |||||||||||||||||||||
| CagentStpMstDesignatedCost | 1.3.6.1.4.1.4413.1.1.1.2.15.13.1.6 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current The MSTP designated cost of a specific port in a specific instance. | |||||||||||||||||||||
| CagentStpMstDesignatedPortId | 1.3.6.1.4.1.4413.1.1.1.2.15.13.1.7 | PortId | RO | ||||||||||||||||||
column · PortId · read-only · current The MSTP designated port ID of a specific port in a specific instance. | |||||||||||||||||||||
| CagentStpMstPortLoopInconsistentState | 1.3.6.1.4.1.4413.1.1.1.2.15.13.1.8 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current The loop inconsistent state of a specific port in a specific instance. This value can only report as true(1) when loop guard is enabled on the port and the port has transitioned from blocking state in this MST instance.
| |||||||||||||||||||||
| CagentStpMstPortTransitionsIntoLoopInconsistentState | 1.3.6.1.4.1.4413.1.1.1.2.15.13.1.9 | Counter32 | RO | ||||||||||||||||||
column · Counter32 · read-only · current The number of times this interface has transitioned into loop inconsistent state. | |||||||||||||||||||||
| CagentStpMstPortTransitionsOutOfLoopInconsistentState | 1.3.6.1.4.1.4413.1.1.1.2.15.13.1.10 | Counter32 | RO | ||||||||||||||||||
column · Counter32 · read-only · current The number of times this interface has transitioned out of loop inconsistent state. | |||||||||||||||||||||
| TagentStpMstVlanTable | 1.3.6.1.4.1.4413.1.1.1.2.15.14 | NA | |||||||||||||||||||
table · not-accessible · current MST VLAN table. | |||||||||||||||||||||
| RagentStpMstVlanEntry | 1.3.6.1.4.1.4413.1.1.1.2.15.14.1 | NA | |||||||||||||||||||
| CagentStpMstVlanRowStatus | 1.3.6.1.4.1.4413.1.1.1.2.15.14.1.1 | RowStatus | RC | ||||||||||||||||||
column · RowStatus · read-create · current The association status of an MSTP instance and a VLAN. Supported values: active(1) - valid association between an MSTP instance and a VLAN. createAndGo(4) - used to create a new association between an MSTP instance and a VLAN. destroy(6) - removes the association between an MSTP instance and a VLAN. | |||||||||||||||||||||
| NagentPvrstpSwitchConfigGroup | 1.3.6.1.4.1.4413.1.1.1.2.15.15 | ||||||||||||||||||||
| SagentPvstpAdminMode | 1.3.6.1.4.1.4413.1.1.1.2.15.15.1 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current The per VLAN spanning tree operational status. enable(1) - enables PVSTP on the switch. disable(2) - disables PVSTP on the switch. The default status is disabled.
| |||||||||||||||||||||
| SagentPvrstpAdminMode | 1.3.6.1.4.1.4413.1.1.1.2.15.15.2 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current The per VLAN rapid spanning tree operational status. enable(1) - enables PVRSTP on the switch. disable(2) - disables PVRSTP on the switch. The default status is disabled.
| |||||||||||||||||||||
| SagentPvrstpUplinkFast | 1.3.6.1.4.1.4413.1.1.1.2.15.15.3 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current Enables or disabled uplink fast feature when switch is in PVST mode. enable(1) - enables UPLINK FAST on the switch. disable(2) - disables UPLINK FAST on the switch. The default status is disabled.
| |||||||||||||||||||||
| SagentPvrstpBackboneFast | 1.3.6.1.4.1.4413.1.1.1.2.15.15.4 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current Enables or disabled backbone fast feature when switch is in PVST mode. enable(1) - enables BACKBONE FAST on the switch. disable(2) - disables BACKBONE FAST on the switch. The default status is disabled.
| |||||||||||||||||||||
| TagentPvrstpVlanTable | 1.3.6.1.4.1.4413.1.1.1.2.15.15.5 | NA | |||||||||||||||||||
table · not-accessible · current PVRSTP table containing PVRSTP per vlan entries. | |||||||||||||||||||||
| RagentPvrstpVlanEntry | 1.3.6.1.4.1.4413.1.1.1.2.15.15.5.1 | NA | |||||||||||||||||||
| CagentPvrstpVlanTableIndex | 1.3.6.1.4.1.4413.1.1.1.2.15.15.5.1.1 | VlanId | NA | ||||||||||||||||||
column · VlanId · not-accessible · current Index to PVRSTP vlan entry in PVRSTP vlan table. | |||||||||||||||||||||
| CagentPvrstpVlanRootPriSec | 1.3.6.1.4.1.4413.1.1.1.2.15.15.5.1.2 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current The PVRSTP primary or secondary root for the VLAN instance.
| |||||||||||||||||||||
| CagentPvrstpVlanHelloTime | 1.3.6.1.4.1.4413.1.1.1.2.15.15.5.1.3 | INTEGER (1..10) | RW | ||||||||||||||||||
column · INTEGER (1..10) · read-write · current The PVRSTP hello time for the VLAN instance. | |||||||||||||||||||||
| CagentPvrstpVlanFwdDelayTime | 1.3.6.1.4.1.4413.1.1.1.2.15.15.5.1.4 | INTEGER (4..30) | RW | ||||||||||||||||||
column · INTEGER (4..30) · read-write · current The PVRSTP forward delay for the VLAN instance. | |||||||||||||||||||||
| CagentPvrstpVlanMaxAgeTime | 1.3.6.1.4.1.4413.1.1.1.2.15.15.5.1.5 | INTEGER (6..40) | RW | ||||||||||||||||||
column · INTEGER (6..40) · read-write · current The PVRSTP max age for the VLAN instance. | |||||||||||||||||||||
| TagentPvrstpPortVlanTable | 1.3.6.1.4.1.4413.1.1.1.2.15.15.6 | NA | |||||||||||||||||||
table · not-accessible · current PVRSTP table containing PVRSTP per port per vlan entries. | |||||||||||||||||||||
| RagentPvrstpPortVlanEntry | 1.3.6.1.4.1.4413.1.1.1.2.15.15.6.1 | NA | |||||||||||||||||||
row · not-accessible · current PVRSTP port entry per vlan attributes. | |||||||||||||||||||||
| CagentPvrstpPortIndex | 1.3.6.1.4.1.4413.1.1.1.2.15.15.6.1.1 | Unsigned32 | NA | ||||||||||||||||||
column · Unsigned32 · not-accessible · current Port index to PVRSTP port entry in PVRSTP port vlan table. | |||||||||||||||||||||
| CagentPvrstpVlanIndex | 1.3.6.1.4.1.4413.1.1.1.2.15.15.6.1.2 | Unsigned32 | NA | ||||||||||||||||||
column · Unsigned32 · not-accessible · current Vlan index to PVRSTP port entry in PVRSTP port vlan table. | |||||||||||||||||||||
| CagentPvrstpPortVlanPriority | 1.3.6.1.4.1.4413.1.1.1.2.15.15.6.1.3 | Unsigned32 (0..255) | RW | ||||||||||||||||||
column · Unsigned32 (0..255) · read-write · current PVRSTP port vlan priority is in the range of 0 to 240. Port priority value should be a multiple of 16. | |||||||||||||||||||||
| CagentPvrstpVlanCost | 1.3.6.1.4.1.4413.1.1.1.2.15.15.6.1.4 | Unsigned32 (0..200000000) | RW | ||||||||||||||||||
column · Unsigned32 (0..200000000) · read-write · current PVRSTP port vlan cost is in the range of 0 to 200000000 ,for 0 its Auto. | |||||||||||||||||||||
| NagentAuthenticationGroup | 1.3.6.1.4.1.4413.1.1.1.2.16 | ||||||||||||||||||||
| SagentAuthenticationListCreate | 1.3.6.1.4.1.4413.1.1.1.2.16.1 | DisplayString (SIZE (0 | 1..15)) | RW | ||||||||||||||||||
scalar · DisplayString (SIZE (0 | 1..15)) · read-write · current Authentication List Create If set to a non empty string, creates a new Authentication List for configuration. | |||||||||||||||||||||
| TagentAuthenticationListTable | 1.3.6.1.4.1.4413.1.1.1.2.16.2 | NA | |||||||||||||||||||
table · not-accessible · current Authentication List table. | |||||||||||||||||||||
| RagentAuthenticationListEntry | 1.3.6.1.4.1.4413.1.1.1.2.16.2.1 | NA | |||||||||||||||||||
| CagentAuthenticationListIndex | 1.3.6.1.4.1.4413.1.1.1.2.16.2.1.1 | Unsigned32 | NA | ||||||||||||||||||
column · Unsigned32 · not-accessible · current Authentication List Index Unique number used for indexing into this table. | |||||||||||||||||||||
| CagentAuthenticationListName | 1.3.6.1.4.1.4413.1.1.1.2.16.2.1.2 | DisplayString (SIZE (1..15)) | RO | ||||||||||||||||||
column · DisplayString (SIZE (1..15)) · read-only · current Authentication List Name Unique name used to identify the Authentication List from other tables. | |||||||||||||||||||||
| CagentAuthenticationListMethod1 | 1.3.6.1.4.1.4413.1.1.1.2.16.2.1.3 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current Authentication List Method 1 Configures the first authentication method to use when this list is specified.
| |||||||||||||||||||||
| CagentAuthenticationListMethod2 | 1.3.6.1.4.1.4413.1.1.1.2.16.2.1.4 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current Authentication List Method 2 Configures the second authentication method to use when this list is specified.
| |||||||||||||||||||||
| CagentAuthenticationListMethod3 | 1.3.6.1.4.1.4413.1.1.1.2.16.2.1.5 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current Authentication List Method 3 Configures the third authentication method to use when this list is specified.
| |||||||||||||||||||||
| CagentAuthenticationListStatus | 1.3.6.1.4.1.4413.1.1.1.2.16.2.1.6 | RowStatus | RW | ||||||||||||||||||
column · RowStatus · read-write · current The status of the Authentication List. Supported values: active(1) - indicates a valid Authenticaiton List destroy(6) - removes the Authentication List. | |||||||||||||||||||||
| CagentAuthenticationListMethod4 | 1.3.6.1.4.1.4413.1.1.1.2.16.2.1.7 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current Authentication List Method 4 Configures the fourth authentication method to use when this list is specified.
| |||||||||||||||||||||
| CagentAuthenticationListMethod5 | 1.3.6.1.4.1.4413.1.1.1.2.16.2.1.8 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current Authentication List Method 5 Configures the fifth authentication method to use when this list is specified.
| |||||||||||||||||||||
| SagentUserConfigDefaultAuthenticationList | 1.3.6.1.4.1.4413.1.1.1.2.16.3 | DisplayString (SIZE (1..15)) | RW | ||||||||||||||||||
scalar · DisplayString (SIZE (1..15)) · read-write · current Default Authentication List This object configures which authentication list to use for users which do not have an Authentication List configured. The list must be configured before setting. | |||||||||||||||||||||
| TagentUserAuthenticationConfigTable | 1.3.6.1.4.1.4413.1.1.1.2.16.4 | NA | |||||||||||||||||||
table · not-accessible · current User Authentication Config Table | |||||||||||||||||||||
| RagentUserAuthenticationConfigEntry | 1.3.6.1.4.1.4413.1.1.1.2.16.4.1 | NA | |||||||||||||||||||
| CagentUserAuthenticationList | 1.3.6.1.4.1.4413.1.1.1.2.16.4.1.1 | DisplayString (SIZE (1..15)) | RW | ||||||||||||||||||
column · DisplayString (SIZE (1..15)) · read-write · current User Authentication List This object configures which authentication list to use for this user. The list must be configured before setting. | |||||||||||||||||||||
| TagentUserPortConfigTable | 1.3.6.1.4.1.4413.1.1.1.2.16.5 | NA | |||||||||||||||||||
table · not-accessible · current User Port Config Table | |||||||||||||||||||||
| RagentUserPortConfigEntry | 1.3.6.1.4.1.4413.1.1.1.2.16.5.1 | NA | |||||||||||||||||||
| CagentUserPortSecurity | 1.3.6.1.4.1.4413.1.1.1.2.16.5.1.1 | AgentPortMask | RW | ||||||||||||||||||
column · AgentPortMask · read-write · current User Port Port Security This object configures which ports the user has access to. Ports are indexed based on dot1dBasePort entries in dot1dBasePortTable. | |||||||||||||||||||||
| NagentClassOfServiceGroup | 1.3.6.1.4.1.4413.1.1.1.2.17 | ||||||||||||||||||||
| TagentClassOfServicePortTable | 1.3.6.1.4.1.4413.1.1.1.2.17.1 | NA | |||||||||||||||||||
table · not-accessible · current A table that contains information about the 802.1p priority mapping to traffic class priority queue for every physical port. | |||||||||||||||||||||
| RagentClassOfServicePortEntry | 1.3.6.1.4.1.4413.1.1.1.2.17.1.1 | NA | |||||||||||||||||||
row · not-accessible · current A 802.1p priority mapped to a traffic class priority queue. | |||||||||||||||||||||
| CagentClassOfServicePortPriority | 1.3.6.1.4.1.4413.1.1.1.2.17.1.1.1 | INTEGER (0..7) | NA | ||||||||||||||||||
column · INTEGER (0..7) · not-accessible · current The Priority value determined for the received frame. This value is equivalent to the priority indicated in the tagged frame received, or one of the evaluated priorities, determined according to the media-type. For untagged frames received from Ethernet media, this value is equal to the dot1dPortDefaultUserPriority value for the ingress port. | |||||||||||||||||||||
| CagentClassOfServicePortClass | 1.3.6.1.4.1.4413.1.1.1.2.17.1.1.2 | INTEGER (0..7) | RW | ||||||||||||||||||
column · INTEGER (0..7) · read-write · current Traffic class priority queue the received frame is mapped to. | |||||||||||||||||||||
| NagentHTTPConfigGroup | 1.3.6.1.4.1.4413.1.1.1.2.18 | ||||||||||||||||||||
| SagentHTTPWebMode | 1.3.6.1.4.1.4413.1.1.1.2.18.1 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current Configures the HTTP server admin mode
| |||||||||||||||||||||
| SagentHTTPJavaMode | 1.3.6.1.4.1.4413.1.1.1.2.18.2 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current Configures the use of the Java interface through Web connections.
| |||||||||||||||||||||
| SagentHTTPMaxSessions | 1.3.6.1.4.1.4413.1.1.1.2.18.3 | Integer32 (0..16) | RW | ||||||||||||||||||
scalar · Integer32 (0..16) · read-write · current Configures the maximum number of allowable HTTP sessions. The default value is 16. | |||||||||||||||||||||
| SagentHTTPHardTimeout | 1.3.6.1.4.1.4413.1.1.1.2.18.4 | Integer32 (1..168) | RW | ||||||||||||||||||
scalar · Integer32 (1..168) · read-write · current Configures the hard timeout for HTTP sessions in hours. The default value is 24 hours. | |||||||||||||||||||||
| SagentHTTPSoftTimeout | 1.3.6.1.4.1.4413.1.1.1.2.18.5 | Integer32 (1..60) | RW | ||||||||||||||||||
scalar · Integer32 (1..60) · read-write · current Configures the soft (activity) timeout for HTTP sessions in minutes. The default value is 5 minutes. | |||||||||||||||||||||
| SagentHTTPWebMgmtPortNum | 1.3.6.1.4.1.4413.1.1.1.2.18.6 | Integer32 (80 | 1025..65535) | RW | ||||||||||||||||||
scalar · Integer32 (80 | 1025..65535) · read-write · current Get/Set the TCP port number that the HTTP server listens to for incoming requests. The port number is an integer value from 1025 to 65535. Before setting this object, check your system (e.g. using 'netstat') to make sure the desired port number is not currently being used by any other service. The default value for this object is 80. Note that existing HTTP login sessions are closed whenever this object value is changed. All new HTTP sessions must be established using the new port number. | |||||||||||||||||||||
| NagentAutoInstallConfigGroup | 1.3.6.1.4.1.4413.1.1.1.2.19 | ||||||||||||||||||||
| SagentAutoinstallMode | 1.3.6.1.4.1.4413.1.1.1.2.19.1 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current Enable/Disable Autoinstall on device.
| |||||||||||||||||||||
| SagentAutoinstallAutosaveMode | 1.3.6.1.4.1.4413.1.1.1.2.19.2 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current Enable/Disable Auto Save of downloaded configuration on device.
| |||||||||||||||||||||
| SagentAutoinstallUnicastRetryCount | 1.3.6.1.4.1.4413.1.1.1.2.19.3 | Integer32 (1..3) | RW | ||||||||||||||||||
scalar · Integer32 (1..3) · read-write · current Sets number of unicast TFTP attempts for configuration file. | |||||||||||||||||||||
| SagentAutoinstallStatus | 1.3.6.1.4.1.4413.1.1.1.2.19.4 | DisplayString | RO | ||||||||||||||||||
scalar · DisplayString · read-only · current Display current Autoinstall status on device. | |||||||||||||||||||||
| SagentAutoinstallAutoRebootMode | 1.3.6.1.4.1.4413.1.1.1.2.19.5 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current Enable/Disable Auto Reboot after succesfull image update on device.
| |||||||||||||||||||||
| SagentAutoinstallOperationalMode | 1.3.6.1.4.1.4413.1.1.1.2.19.6 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current Enable/Disable Autoinstall operational mode on device.
| |||||||||||||||||||||
| NagentExecAccountingGroup | 1.3.6.1.4.1.4413.1.1.1.2.20 | ||||||||||||||||||||
| SagentExecAccountingListCreate | 1.3.6.1.4.1.4413.1.1.1.2.20.1 | DisplayString (SIZE (0 | 1..15)) | RW | ||||||||||||||||||
scalar · DisplayString (SIZE (0 | 1..15)) · read-write · current ExecAccounting List Create if set to a non empty string, creates a new ExecAccounting List for configuration. | |||||||||||||||||||||
| TagentExecAccountingListTable | 1.3.6.1.4.1.4413.1.1.1.2.20.2 | NA | |||||||||||||||||||
table · not-accessible · current ExecAccounting Method List table. | |||||||||||||||||||||
| RagentExecAccountingListEntry | 1.3.6.1.4.1.4413.1.1.1.2.20.2.1 | NA | |||||||||||||||||||
| CagentExecAccountingListIndex | 1.3.6.1.4.1.4413.1.1.1.2.20.2.1.1 | Unsigned32 | NA | ||||||||||||||||||
column · Unsigned32 · not-accessible · current ExecAccounting List Index Unique number used for indexing into this table. | |||||||||||||||||||||
| CagentExecAccountingListName | 1.3.6.1.4.1.4413.1.1.1.2.20.2.1.2 | DisplayString (SIZE (1..15)) | RO | ||||||||||||||||||
column · DisplayString (SIZE (1..15)) · read-only · current Unique name used to identify the ExecAccounting List from other tables. | |||||||||||||||||||||
| CagentExecAccountingMethodType | 1.3.6.1.4.1.4413.1.1.1.2.20.2.1.3 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current ExecAccounting Method Type Configures the method type to use when this ExecAccounting list is specified.
| |||||||||||||||||||||
| CagentExecAccountingListMethod1 | 1.3.6.1.4.1.4413.1.1.1.2.20.2.1.4 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current ExecAccounting List Method 1 Configures the authentication method to use when this list is specified.
| |||||||||||||||||||||
| CagentExecAccountingListMethod2 | 1.3.6.1.4.1.4413.1.1.1.2.20.2.1.5 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current ExecAccounting List Method 2 Configures the authentication method to use when this list is specified.
| |||||||||||||||||||||
| CagentExecAccountingListStatus | 1.3.6.1.4.1.4413.1.1.1.2.20.2.1.6 | RowStatus | RW | ||||||||||||||||||
column · RowStatus · read-write · current The status of the ExecAccounting List. Supported values: active(1) - indicates a valid ExecAccounting List destroy(6) - removes the ExecAccounting List. | |||||||||||||||||||||
| NagentCmdsAccountingGroup | 1.3.6.1.4.1.4413.1.1.1.2.21 | ||||||||||||||||||||
| SagentCmdsAccountingListCreate | 1.3.6.1.4.1.4413.1.1.1.2.21.1 | DisplayString (SIZE (0 | 1..15)) | RW | ||||||||||||||||||
scalar · DisplayString (SIZE (0 | 1..15)) · read-write · current CmdsAccounting List Create if set to a non empty string, creates a new CmdsAccounting List for configuration. | |||||||||||||||||||||
| TagentCmdsAccountingListTable | 1.3.6.1.4.1.4413.1.1.1.2.21.2 | NA | |||||||||||||||||||
table · not-accessible · current CmdsAccounting Method List table. | |||||||||||||||||||||
| RagentCmdsAccountingListEntry | 1.3.6.1.4.1.4413.1.1.1.2.21.2.1 | NA | |||||||||||||||||||
| CagentCmdsAccountingListIndex | 1.3.6.1.4.1.4413.1.1.1.2.21.2.1.1 | Unsigned32 | NA | ||||||||||||||||||
column · Unsigned32 · not-accessible · current CmdsAccounting List Index Unique number used for indexing into this table. | |||||||||||||||||||||
| CagentCmdsAccountingListName | 1.3.6.1.4.1.4413.1.1.1.2.21.2.1.2 | DisplayString (SIZE (1..15)) | RO | ||||||||||||||||||
column · DisplayString (SIZE (1..15)) · read-only · current Unique name used to identify the CmdsAccounting List from other tables. | |||||||||||||||||||||
| CagentCmdsAccountingMethodType | 1.3.6.1.4.1.4413.1.1.1.2.21.2.1.3 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current CmdsAccounting Method Type Configures the method type to use when this CmdsAccounting list is specified.
| |||||||||||||||||||||
| CagentCmdsAccountingListMethod1 | 1.3.6.1.4.1.4413.1.1.1.2.21.2.1.4 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current CmdsAccounting List Method 1 Configures the authentication method to use when this list is specified.
| |||||||||||||||||||||
| CagentCmdsAccountingListStatus | 1.3.6.1.4.1.4413.1.1.1.2.21.2.1.5 | RowStatus | RW | ||||||||||||||||||
column · RowStatus · read-write · current The status of the CmdsAccounting List. Supported values: active(1) - indicates a valid CmdsAccounting List destroy(6) - removes the CmdsAccounting List. | |||||||||||||||||||||
| NagentCmdsAuthorizationGroup | 1.3.6.1.4.1.4413.1.1.1.2.23 | ||||||||||||||||||||
| SagentCmdsAuthorizationListCreate | 1.3.6.1.4.1.4413.1.1.1.2.23.1 | DisplayString (SIZE (0 | 1..20)) | RW | ||||||||||||||||||
scalar · DisplayString (SIZE (0 | 1..20)) · read-write · current Command Authorization List Create. If set to a non empty string, creates a new Command Authorization List for configuration. List name must contain Alphanumeric characters including '-', '_', ' '. | |||||||||||||||||||||
| TagentCmdsAuthorizationListTable | 1.3.6.1.4.1.4413.1.1.1.2.23.2 | NA | |||||||||||||||||||
table · not-accessible · current Command Authorization Method List table. | |||||||||||||||||||||
| RagentCmdsAuthorizationListEntry | 1.3.6.1.4.1.4413.1.1.1.2.23.2.1 | NA | |||||||||||||||||||
row · not-accessible · current Command Authorization Method List Entry. | |||||||||||||||||||||
| CagentCmdsAuthorizationListIndex | 1.3.6.1.4.1.4413.1.1.1.2.23.2.1.1 | Unsigned32 | NA | ||||||||||||||||||
column · Unsigned32 · not-accessible · current Command Authorization List Index Unique number used for indexing into this table. | |||||||||||||||||||||
| CagentCmdsAuthorizationListName | 1.3.6.1.4.1.4413.1.1.1.2.23.2.1.2 | DisplayString (SIZE (1..20)) | RO | ||||||||||||||||||
column · DisplayString (SIZE (1..20)) · read-only · current Command Authorization List Name Unique name used to identify the Command Authorization List from other tables. | |||||||||||||||||||||
| CagentCmdsAuthorizationListStatus | 1.3.6.1.4.1.4413.1.1.1.2.23.2.1.3 | RowStatus | RW | ||||||||||||||||||
column · RowStatus · read-write · current The status of the CmdsAuthorization List. Supported values: active(1) - indicates a valid CmdsAuthorization List destroy(6) - removes the CmdsAuthorization List. | |||||||||||||||||||||
| CagentCmdsAuthorizationListMethod1 | 1.3.6.1.4.1.4413.1.1.1.2.23.2.1.4 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current Command Authorization List Method1 Configures the Command Authorization method to use when this list is specified.
| |||||||||||||||||||||
| CagentCmdsAuthorizationListMethod2 | 1.3.6.1.4.1.4413.1.1.1.2.23.2.1.5 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current Command Authorization List Method2 Configures the Command Authorization method to use when this list is specified.
| |||||||||||||||||||||
| CagentCmdsAuthorizationListMethod3 | 1.3.6.1.4.1.4413.1.1.1.2.23.2.1.6 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current Command Authorization List Method2 Configures the Command Authorization method to use when this list is specified.
| |||||||||||||||||||||
| NagentExecAuthorizationGroup | 1.3.6.1.4.1.4413.1.1.1.2.24 | ||||||||||||||||||||
| SagentExecAuthorizationListCreate | 1.3.6.1.4.1.4413.1.1.1.2.24.1 | DisplayString (SIZE (0 | 1..20)) | RW | ||||||||||||||||||
scalar · DisplayString (SIZE (0 | 1..20)) · read-write · current Exec Authorization List Create. If set to a non empty string, creates a new Exec Authorization List for configuration. List name must contain Alphanumeric characters including '-', '_', ' '. | |||||||||||||||||||||
| TagentExecAuthorizationListTable | 1.3.6.1.4.1.4413.1.1.1.2.24.2 | NA | |||||||||||||||||||
table · not-accessible · current Exec Authorization Method List table. | |||||||||||||||||||||
| RagentExecAuthorizationListEntry | 1.3.6.1.4.1.4413.1.1.1.2.24.2.1 | NA | |||||||||||||||||||
row · not-accessible · current Exec Authorization Method List Entry. | |||||||||||||||||||||
| CagentExecAuthorizationListIndex | 1.3.6.1.4.1.4413.1.1.1.2.24.2.1.1 | Unsigned32 | NA | ||||||||||||||||||
column · Unsigned32 · not-accessible · current Exec Authorization List Index Unique number used for indexing into this table. | |||||||||||||||||||||
| CagentExecAuthorizationListName | 1.3.6.1.4.1.4413.1.1.1.2.24.2.1.2 | DisplayString (SIZE (1..20)) | RO | ||||||||||||||||||
column · DisplayString (SIZE (1..20)) · read-only · current Exec Authorization List Name Unique name used to identify the Exec Authorization List from other tables. | |||||||||||||||||||||
| CagentExecAuthorizationListStatus | 1.3.6.1.4.1.4413.1.1.1.2.24.2.1.3 | RowStatus | RW | ||||||||||||||||||
column · RowStatus · read-write · current The status of the ExecAuthorization List. Supported values: active(1) - indicates a valid ExecAuthorization List destroy(6) - removes the ExecAuthorization List. | |||||||||||||||||||||
| CagentExecAuthorizationListMethod1 | 1.3.6.1.4.1.4413.1.1.1.2.24.2.1.4 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current Exec Authorization List Method1 Configures the Exec Authorization method to use when this list is specified.
| |||||||||||||||||||||
| CagentExecAuthorizationListMethod2 | 1.3.6.1.4.1.4413.1.1.1.2.24.2.1.5 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current Exec Authorization List Method2 Configures the Exec Authorization method to use when this list is specified.
| |||||||||||||||||||||
| CagentExecAuthorizationListMethod3 | 1.3.6.1.4.1.4413.1.1.1.2.24.2.1.6 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current Exec Authorization List Method3 Configures the Exec Authorization method to use when this list is specified.
| |||||||||||||||||||||
| CagentExecAuthorizationListMethod4 | 1.3.6.1.4.1.4413.1.1.1.2.24.2.1.7 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current Exec Authorization List Method4 Configures the Exec Authorization method to use when this list is specified.
| |||||||||||||||||||||
| NagentSwitchMbufConfigGroup | 1.3.6.1.4.1.4413.1.1.1.2.25 | ||||||||||||||||||||
| SagentSwitchMbufRisingThreshold | 1.3.6.1.4.1.4413.1.1.1.2.25.1 | Unsigned32 (0..100) | RW | ||||||||||||||||||
scalar · Unsigned32 (0..100) · read-write · current The Mbuf utilization rising threshold in percentage. A single notification (rising event) is generated when the total Mbuf utilization exceeds this threshold. After a rising event is generated, another such event will not be generated until the total Mbuf utilization falls below the agentSwitchMbufFallingThreshold and then exceeds the agentSwitchMbufRisingThreshold. | |||||||||||||||||||||
| SagentSwitchMbufFallingThreshold | 1.3.6.1.4.1.4413.1.1.1.2.25.2 | Unsigned32 (0..100) | RW | ||||||||||||||||||
scalar · Unsigned32 (0..100) · read-write · current The Mbuf utilization falling threshold in percentage. A single notification (falling event) is generated when the total Mbuf utilization falls below this threshold. After a falling event is generated, another such event will not be generated until the total Mbuf utilization exceeds the agentSwitchMbufRisingThreshold and then falls below the agentSwitchMbufFallingThreshold. | |||||||||||||||||||||
| SagentSwitchMbufNotificationSeverity | 1.3.6.1.4.1.4413.1.1.1.2.25.3 | AgentLogSeverity | RW | ||||||||||||||||||
scalar · AgentLogSeverity · read-write · current Severity level while notification is generated for rising and falling threshold. | |||||||||||||||||||||
| NagentDigitalSignatureConfigGroup | 1.3.6.1.4.1.4413.1.1.1.2.26 | ||||||||||||||||||||
| SagentDigitalSignatureVerifyMode | 1.3.6.1.4.1.4413.1.1.1.2.26.1 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current To configure the digital signature verify option for the downloading image and config files. The selected option is stored in config data. The following options are supported: noverify - no digital signature verification of image or config script file image - digital signature verification of image only config - digital signature verification of config script only all - digital signature verification of image and config script file
| |||||||||||||||||||||
| NagentSystemGroup | 1.3.6.1.4.1.4413.1.1.1.3 | ||||||||||||||||||||
| SagentSaveConfig | 1.3.6.1.4.1.4413.1.1.1.3.1 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current enable(1) will initiate an configuration save to nvram. Status is returned by the object agentSaveConfigStatus.
| |||||||||||||||||||||
| SagentClearConfig | 1.3.6.1.4.1.4413.1.1.1.3.2 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current clear config to factory defaults
| |||||||||||||||||||||
| SagentClearLoginSessions | 1.3.6.1.4.1.4413.1.1.1.3.4 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current close all telnet sessions
| |||||||||||||||||||||
| SagentClearPasswords | 1.3.6.1.4.1.4413.1.1.1.3.5 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current reset passwords
| |||||||||||||||||||||
| SagentClearPortStats | 1.3.6.1.4.1.4413.1.1.1.3.6 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current clear all port statistics
| |||||||||||||||||||||
| SagentClearSwitchStats | 1.3.6.1.4.1.4413.1.1.1.3.7 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current clear all switch statistics
| |||||||||||||||||||||
| SagentClearTrapLog | 1.3.6.1.4.1.4413.1.1.1.3.8 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current clear trap log
| |||||||||||||||||||||
| SagentClearVlan | 1.3.6.1.4.1.4413.1.1.1.3.9 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current clear vlan entries
| |||||||||||||||||||||
| SagentResetSystem | 1.3.6.1.4.1.4413.1.1.1.3.10 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current Resets the switch. This object is not valid for stacking platforms.
| |||||||||||||||||||||
| SagentSaveConfigStatus | 1.3.6.1.4.1.4413.1.1.1.3.11 | INTEGER | RO | ||||||||||||||||||
scalar · INTEGER · read-only · current Indicates the current status of an save configuration request.
| |||||||||||||||||||||
| SagentStartupConfigErase | 1.3.6.1.4.1.4413.1.1.1.3.12 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current Erase the text-based configuration named startup-config stored in non-volatile memory.On read returns 0.
| |||||||||||||||||||||
| SagentFactoryDefaultsErase | 1.3.6.1.4.1.4413.1.1.1.3.13 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current Erase the text-based configuration file named factory-defaults stored in non-volatile memory.On read returns 0.
| |||||||||||||||||||||
| NagentCableTesterGroup | 1.3.6.1.4.1.4413.1.1.1.4 | ||||||||||||||||||||
| SagentCableTesterStatus | 1.3.6.1.4.1.4413.1.1.1.4.1 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current Status of the Virtual Cable Tester
active(1) - cable testing is in progress. Set to this value
to start the test.
success(2) - A successful test was performed. Cannot be set.
failure(3) - A failure was encountered during the test.
Cannot be set.
uninitialized(4) - No test has been performed yet. Cannot be set.
| |||||||||||||||||||||
| SagentCableTesterIfIndex | 1.3.6.1.4.1.4413.1.1.1.4.2 | Unsigned32 | RW | ||||||||||||||||||
scalar · Unsigned32 · read-write · current Determines on which port to perform the cable test. Limited to copper based ports. | |||||||||||||||||||||
| SagentCableTesterCableStatus | 1.3.6.1.4.1.4413.1.1.1.4.3 | INTEGER | RO | ||||||||||||||||||
scalar · INTEGER · read-only · current Indicates the results of the Cable Test.
normal(1) - The cable is working correctly.
open(2) - The cable is disconnected or there is a faulty
connector.
short(3) - There is an electrical short in the cable.
unknown(4) - No test has been performed yet, or a test is
currently in progress.
| |||||||||||||||||||||
| SagentCableTesterMinimumCableLength | 1.3.6.1.4.1.4413.1.1.1.4.4 | Unsigned32 | RO | ||||||||||||||||||
scalar · Unsigned32 · read-only · current The estimated length of the cable in meters. This value indicates the shortest length estimated. This object will return 0 if agentCableTesterStatus is not success(2) or the cable length is unknown. | |||||||||||||||||||||
| SagentCableTesterMaximumCableLength | 1.3.6.1.4.1.4413.1.1.1.4.5 | Unsigned32 | RO | ||||||||||||||||||
scalar · Unsigned32 · read-only · current The estimated length of the cable in meters. This value indicates the longest length estimated. This object will return 0 if agentCableTesterStatus is not success(2) or the cable length is unknown. | |||||||||||||||||||||
| SagentCableTesterCableFailureLocation | 1.3.6.1.4.1.4413.1.1.1.4.6 | Unsigned32 | RO | ||||||||||||||||||
scalar · Unsigned32 · read-only · current The estimated distance in meters from the end of the cable to the failure location. This object will return 0 if agentCableTesterStatus is not success(2). | |||||||||||||||||||||
Textual conventions
Ipv6AddressOCTET STRING (SIZE (16))Display hint:
2x:This data type is used to model IPv6 addresses. This is a binary string of 16 octets in network byte-order.
Ipv6AddressIfIdentifierOCTET STRING (SIZE (0..8))Display hint:
2x:This data type is used to model IPv6 address interface identifiers. This is a binary string of up to 8 octets in network byte-order.
Ipv6AddressPrefixOCTET STRING (SIZE (0..16))Display hint:
2x:This data type is used to model IPv6 address prefixes. This is a binary string of up to 16 octets in network byte-order.
Ipv6IfIndexInteger32 (1..2147483647)Display hint:
dA unique value, greater than zero for each internetwork-layer interface in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each internetwork-layer interface must remain constant at least from one re-initialization of the entity's network management system to the next re-initialization.
Ipv6IfIndexOrZeroInteger32 (0..2147483647)Display hint:
dThis textual convention is an extension of the Ipv6IfIndex convention. The latter defines a greater than zero value used to identify an IPv6 interface in the managed system. This extension permits the additional value of zero. The value zero is object-specific and must therefore be defined as part of the description of any object which uses this syntax. Examples of the usage of zero might include situations where interface was unknown, or when none or all interfaces need to be referenced.
PortIdOCTET STRING (SIZE (2))Display hint:
2x:This data type is used to model port ids. This is a binary string of 2 octets.
PortListOCTET STRINGEach octet within this value specifies a set of eight ports, with the first octet specifying ports 1 through 8, the second octet specifying ports 9 through 16, etc. Within each octet, the most significant bit represents the lowest numbered port, and the least significant bit represents the highest numbered port. Thus, each port of the bridge is represented by a single bit within the value of this object. If that bit has a value of '1' then that port is included in the set of ports; the port is not included if its bit has a value of '0'.
VlanListOCTET STRINGEach octet within this value specifies a set of eight vlans, with the first octet specifying vlans 1 through 8, the second octet specifying vlans 9 through 16, etc. Within each octet, the most significant bit represents the lowest numbered vlan, and the least significant bit represents the highest numbered vlan. Thus, each vlan supported is represented by a single bit within the value of this object. If that bit has a value of '1' then the associated port is in that vlan; the port is not included if the vlans bit has a value of '0'.
Traps / Notifications
- agentSwitchCpuFallingThresholdTrap
1.3.6.1.4.1.4413.1.1.1.0.22 - agentSwitchCpuFreeMemAboveThresholdTrap
1.3.6.1.4.1.4413.1.1.1.0.24 - agentSwitchCpuFreeMemBelowThresholdTrap
1.3.6.1.4.1.4413.1.1.1.0.23 - agentSwitchCpuRisingThresholdTrap
1.3.6.1.4.1.4413.1.1.1.0.21 - agentSwitchIpAddressConflictTrap
1.3.6.1.4.1.4413.1.1.1.0.20 - agentSwitchMbufFallingThresholdTrap
1.3.6.1.4.1.4413.1.1.1.0.28 - agentSwitchMbufRisingThresholdTrap
1.3.6.1.4.1.4413.1.1.1.0.27 - broadcastStormEndTrap
1.3.6.1.4.1.4413.1.1.1.0.3 - broadcastStormStartTrap
1.3.6.1.4.1.4413.1.1.1.0.2 - daiIntfErrorDisabledTrap
1.3.6.1.4.1.4413.1.1.1.0.15 - dhcpSnoopingIntfErrorDisabledTrap
1.3.6.1.4.1.4413.1.1.1.0.18 - failedUserLoginTrap
1.3.6.1.4.1.4413.1.1.1.0.13 - fanFailureTrap
1.3.6.1.4.1.4413.1.1.1.0.9 - linkFailureTrap
1.3.6.1.4.1.4413.1.1.1.0.4 - loopDetectedTrap
1.3.6.1.4.1.4413.1.1.1.0.26 - multipleUsersTrap
1.3.6.1.4.1.4413.1.1.1.0.1 - noStartupConfigTrap
1.3.6.1.4.1.4413.1.1.1.0.19 - powerSupplyStatusChangeTrap
1.3.6.1.4.1.4413.1.1.1.0.12 - stpInstanceLoopInconsistentEndTrap
1.3.6.1.4.1.4413.1.1.1.0.17 - stpInstanceLoopInconsistentStartTrap
1.3.6.1.4.1.4413.1.1.1.0.16 - stpInstanceNewRootTrap
1.3.6.1.4.1.4413.1.1.1.0.10 - stpInstanceTopologyChangeTrap
1.3.6.1.4.1.4413.1.1.1.0.11 - topologyChangeInitiatedTrap
1.3.6.1.4.1.4413.1.1.1.0.25 - userLockoutTrap
1.3.6.1.4.1.4413.1.1.1.0.14 - vlanDefaultCfgFailureTrap
1.3.6.1.4.1.4413.1.1.1.0.7 - vlanDeleteLastTrap
1.3.6.1.4.1.4413.1.1.1.0.6 - vlanRequestFailureTrap
1.3.6.1.4.1.4413.1.1.1.0.5 - vlanRestoreFailureTrap
1.3.6.1.4.1.4413.1.1.1.0.8