ES3528MO-MIB
ACCTON TechnologyThe MIB module for ES3528MO.
snmptranslate -m ES3528MO-MIB -Tpsnmpwalk -v2c -c <community> -m ES3528MO-MIB <host> 1.3.6.1.4.1.259.6.10.94Imports
| BRIDGE-MIB | BridgeId, MacAddress, Timeout, dot1dStpPort, dot1dStpPortEntry |
|---|---|
| IEEE8021-PAE-MIB | dot1xAuthConfigEntry |
| IF-MIB | InterfaceIndex, ifIndex |
| INET-ADDRESS-MIB | InetAddress, InetAddressType |
| P-BRIDGE-MIB | EnabledStatus |
| Q-BRIDGE-MIB | PortList, VlanIndex |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
| SNMPv2-SMI | Bits, Counter32, Counter64, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, enterprises, iso, private |
| SNMPv2-TC | DisplayString, PhysAddress, RowStatus, TEXTUAL-CONVENTION, TruthValue |
OID tree
| Name | OID | Type | Access | Status |
|---|---|---|---|---|
| Naccton | 1.3.6.1.4.1.259 | |||
| NsnmpMgt | 1.3.6.1.4.1.259.6 | |||
| NcheetahSwitchMgt | 1.3.6.1.4.1.259.6.10 | |||
| Ies3528moMIB | 1.3.6.1.4.1.259.6.10.94 | |||
identity The MIB module for ES3528MO. | ||||
| Nes3528moMIBObjects | 1.3.6.1.4.1.259.6.10.94.1 | |||
| NswitchMgt | 1.3.6.1.4.1.259.6.10.94.1.1 | |||
| SswitchNumber | 1.3.6.1.4.1.259.6.10.94.1.1.2 | Integer32 | RO | |
scalar · Integer32 · read-only · current The total number of switches present on this system. | ||||
| TswitchInfoTable | 1.3.6.1.4.1.259.6.10.94.1.1.3 | NA | ||
table · not-accessible · current Table of descriptive and status information about the switch units in this system. | ||||
| RswitchInfoEntry | 1.3.6.1.4.1.259.6.10.94.1.1.3.1 | NA | ||
row · not-accessible · current Table providing descriptions and status information for switch units.
| ||||
| CswUnitIndex | 1.3.6.1.4.1.259.6.10.94.1.1.3.1.1 | Integer32 | NA | |
column · Integer32 · not-accessible · current This object identifies the switch within the system for which this entry contains information. This value can never be greater than switchNumber. | ||||
| CswHardwareVer | 1.3.6.1.4.1.259.6.10.94.1.1.3.1.2 | DisplayString (SIZE (0..20)) | RO | |
column · DisplayString (SIZE (0..20)) · read-only · current Hardware version of the main board. | ||||
| CswMicrocodeVer | 1.3.6.1.4.1.259.6.10.94.1.1.3.1.3 | DisplayString (SIZE (0..20)) | RO | |
column · DisplayString (SIZE (0..20)) · read-only · current Microcode version of the main board. | ||||
| CswLoaderVer | 1.3.6.1.4.1.259.6.10.94.1.1.3.1.4 | DisplayString (SIZE (0..20)) | RO | |
column · DisplayString (SIZE (0..20)) · read-only · current Loader version of the main board. | ||||
| CswBootRomVer | 1.3.6.1.4.1.259.6.10.94.1.1.3.1.5 | DisplayString (SIZE (0..20)) | RO | |
column · DisplayString (SIZE (0..20)) · read-only · current Boot ROM code version of the main board. | ||||
| CswOpCodeVer | 1.3.6.1.4.1.259.6.10.94.1.1.3.1.6 | DisplayString (SIZE (0..20)) | RO | |
column · DisplayString (SIZE (0..20)) · read-only · current Operation code version of the main board. | ||||
| CswPortNumber | 1.3.6.1.4.1.259.6.10.94.1.1.3.1.7 | Integer32 | RO | |
column · Integer32 · read-only · current The number of ports on this switch. | ||||
| CswPowerStatus | 1.3.6.1.4.1.259.6.10.94.1.1.3.1.8 | INTEGER | RO | |
column · INTEGER · read-only · current Indicates the switch using internalPower(1), redundantPower(2) or both(3)
| ||||
| CswRoleInSystem | 1.3.6.1.4.1.259.6.10.94.1.1.3.1.9 | INTEGER | RO | |
column · INTEGER · read-only · current Indicates the switch is master(1), backupMaster(2) or slave(3) in this system.
| ||||
| CswSerialNumber | 1.3.6.1.4.1.259.6.10.94.1.1.3.1.10 | DisplayString (SIZE (0..80)) | RO | |
column · DisplayString (SIZE (0..80)) · read-only · current Serial number of the switch. | ||||
| CswServiceTag | 1.3.6.1.4.1.259.6.10.94.1.1.3.1.13 | DisplayString (SIZE (0..80)) | RO | |
column · DisplayString (SIZE (0..80)) · read-only · current Service tag serial-number of the switch. | ||||
| CswModelNumber | 1.3.6.1.4.1.259.6.10.94.1.1.3.1.14 | DisplayString (SIZE (0..15)) | RO | |
column · DisplayString (SIZE (0..15)) · read-only · current Model number of the switch. | ||||
| CswEpldVer | 1.3.6.1.4.1.259.6.10.94.1.1.3.1.15 | DisplayString (SIZE (0..20)) | RO | |
column · DisplayString (SIZE (0..20)) · read-only · current The EPLD version of the switch. | ||||
| SswitchOperState | 1.3.6.1.4.1.259.6.10.94.1.1.4 | INTEGER | RO | |
scalar · INTEGER · read-only · current Global operation state of the switch.
| ||||
| NswitchProductId | 1.3.6.1.4.1.259.6.10.94.1.1.5 | |||
| SswProdName | 1.3.6.1.4.1.259.6.10.94.1.1.5.1 | DisplayString (SIZE (0..127)) | RO | |
scalar · DisplayString (SIZE (0..127)) · read-only · current The product name of this switch. | ||||
| SswProdManufacturer | 1.3.6.1.4.1.259.6.10.94.1.1.5.2 | DisplayString (SIZE (0..127)) | RO | |
scalar · DisplayString (SIZE (0..127)) · read-only · current The product manufacturer of this switch. | ||||
| SswProdDescription | 1.3.6.1.4.1.259.6.10.94.1.1.5.3 | DisplayString (SIZE (0..127)) | RO | |
scalar · DisplayString (SIZE (0..127)) · read-only · current The product description of this switch. | ||||
| SswProdVersion | 1.3.6.1.4.1.259.6.10.94.1.1.5.4 | DisplayString (SIZE (0..127)) | RO | |
scalar · DisplayString (SIZE (0..127)) · read-only · current The runtime code version of this switch. | ||||
| SswProdUrl | 1.3.6.1.4.1.259.6.10.94.1.1.5.5 | DisplayString (SIZE (0..127)) | RO | |
scalar · DisplayString (SIZE (0..127)) · read-only · current The URL of this switch, which we can connect through a web browser. | ||||
| SswIdentifier | 1.3.6.1.4.1.259.6.10.94.1.1.5.6 | Integer32 | RO | |
scalar · Integer32 · read-only · current A unique identifier of which switch in the chassis is currently being looked at. | ||||
| SswChassisServiceTag | 1.3.6.1.4.1.259.6.10.94.1.1.5.7 | DisplayString (SIZE (0..80)) | RO | |
scalar · DisplayString (SIZE (0..80)) · read-only · current The service tag of the chassis this switch resides in. | ||||
| TswitchIndivPowerTable | 1.3.6.1.4.1.259.6.10.94.1.1.6 | NA | ||
table · not-accessible · current Table about the status of individual powers. | ||||
| RswitchIndivPowerEntry | 1.3.6.1.4.1.259.6.10.94.1.1.6.1 | NA | ||
row · not-accessible · current Table about the status of individual power. | ||||
| CswIndivPowerUnitIndex | 1.3.6.1.4.1.259.6.10.94.1.1.6.1.1 | Integer32 | AN | |
column · Integer32 · accessible-for-notify · current This is defined as swUnitIndex. | ||||
| CswIndivPowerIndex | 1.3.6.1.4.1.259.6.10.94.1.1.6.1.2 | INTEGER | AN | |
column · INTEGER · accessible-for-notify · current 1 means internal power, 2 means external power.
| ||||
| CswIndivPowerStatus | 1.3.6.1.4.1.259.6.10.94.1.1.6.1.3 | INTEGER | RO | |
column · INTEGER · read-only · current notPresent(1) means not present, green(2) means up, red(3) means down.
| ||||
| SswitchJumboFrameStatus | 1.3.6.1.4.1.259.6.10.94.1.1.7 | INTEGER | RW | |
scalar · INTEGER · read-write · current enable(1) means the Jumbo Frame has enabled, disabled(2) means the Jumbo Frame has disabled.
| ||||
| NamtrMgt | 1.3.6.1.4.1.259.6.10.94.1.1.8 | |||
| SamtrMacAddrAgingStatus | 1.3.6.1.4.1.259.6.10.94.1.1.8.3 | EnabledStatus | RW | |
scalar · EnabledStatus · read-write · current If this is enabled(1), the MAC address table will age out according to its timer. If this is disabled(2), the MAC address table will not age out. | ||||
| SamtrMacAddrDynamicCount | 1.3.6.1.4.1.259.6.10.94.1.1.8.4 | Counter32 | RO | |
scalar · Counter32 · read-only · current The number of dot1dTpFdbTable entries in the BRIDGE-MIB. | ||||
| SamtrMacAddrStaticCount | 1.3.6.1.4.1.259.6.10.94.1.1.8.5 | Counter32 | RO | |
scalar · Counter32 · read-only · current The number of dot1dStaticTable entries in the BRIDGE-MIB. | ||||
| SamtrMacAddrTotalCount | 1.3.6.1.4.1.259.6.10.94.1.1.8.6 | Counter32 | RO | |
scalar · Counter32 · read-only · current The sum of dot1dTpFdbTable and dot1dStaticTable entries. | ||||
| NportMgt | 1.3.6.1.4.1.259.6.10.94.1.2 | |||
| TportTable | 1.3.6.1.4.1.259.6.10.94.1.2.1 | NA | ||
table · not-accessible · current Table of descriptive and status information describing the configuration of each switch port. This table also contains information about each trunk. | ||||
| RportEntry | 1.3.6.1.4.1.259.6.10.94.1.2.1.1 | NA | ||
row · not-accessible · current An entry in the table, describing the configuration of one switch port or trunk.
| ||||
| CportIndex | 1.3.6.1.4.1.259.6.10.94.1.2.1.1.1 | Integer32 | NA | |
column · Integer32 · not-accessible · current The port and the trunk (including trunk members) interface of the portTable. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex in the IF-MIB. | ||||
| CportName | 1.3.6.1.4.1.259.6.10.94.1.2.1.1.2 | DisplayString (SIZE (0..64)) | RW | |
column · DisplayString (SIZE (0..64)) · read-write · current The name of the port or trunk. This is the same as ifAlias in the IF-MIB (RFC2863 or later). | ||||
| CportType | 1.3.6.1.4.1.259.6.10.94.1.2.1.1.3 | INTEGER | RO | |
column · INTEGER · read-only · current Indicates the port type of the configuration of the switch.
| ||||
| CportSpeedDpxCfg | 1.3.6.1.4.1.259.6.10.94.1.2.1.1.4 | INTEGER | RW | |
column · INTEGER · read-write · current Configures the speed and duplex mode for a port or trunk,
according to:
halfDuplex10(2) - 10Mbps and half duplex mode
fullDuplex10(3) - 10Mbps and full duplex mode
halfDuplex100(4) - 100Mbps and half duplex mode
fullDuplex100(5) - 100Mbps and full duplex mode
halfDuplex1000(6) - 1000Mbps and half duplex mode
fullDuplex1000(7) - 1000Mbps and full duplex mode
halfDuplex10g(8) - 10g and half duplex mode
fullDuplex10g(9) - 10g and full duplex mode
hundredBaseTX port can be set as:
halfDuplex10(2)
fullDuplex10(3)
halfDuplex100(4)
fullDuplex100(5)
hundredBaseFX port can be set as:
fullDuplex100(5)
thousandBaseSX port can be set as:
fullDuplex1000(7)
thousandBaseLX port can be set as:
fullDuplex1000(7)
thousandBaseT port can be set as:
halfDuplex10(2)
fullDuplex10(3)
halfDuplex100(4)
fullDuplex100(5)
thousandBaseGBIC port can be set as:
fullDuplex1000(7)
thousandBaseSfp port can be set as:
fullDuplex1000(7)
hundredBaseFxScSingleMode port can be set as:
fullDuplex100(5)
hundredBaseFxScMultiMode port can be set as:
fullDuplex100(5)
thousandBaseCX port can be set as:
fullDuplex1000(7)
tenG port can be set as:
halfDuplex10g(8)
fullDuplex10g(9)
The actual operating speed and duplex of the port
is given by portSpeedDpxStatus.
| ||||
| CportFlowCtrlCfg | 1.3.6.1.4.1.259.6.10.94.1.2.1.1.5 | INTEGER | RW | |
column · INTEGER · read-write · current (1) Flow control mechanism is enabled with tx and rx pause
mechansim.
If the port type is hundredBaseTX or thousandBaseSX:
When the port is operating in halfDuplex mode, the
port uses backPressure flow control mechanism. When
the port is operating in fullDuplex mode, the port
uses IEEE 802.3x flow control mechanism.
If the port type is hundredBaseFX:
When the port is operating in halfDuplex mode, the
port uses backPressure flow control mechanism. When
the port is operating in fullDuplex mode, Flow
control mechanism will not function.
(2) Flow control mechanism is disabled.
(5) Flow control mechanism is enabled with tx pause
mechanism only.
(6) Flow control mechansim is enabled with rx pause
mechansim only.
Fast ethernet ports can be set as:
enabled(1),
disabled(2).
Gigabit ethernet ports can be set as:
enabled(1),
disabled(2),
tx(5),
rx(6).
The actual flow control mechanism is used given by
portFlowCtrlStatus.
| ||||
| CportCapabilities | 1.3.6.1.4.1.259.6.10.94.1.2.1.1.6 | Bits | RW | |
column · Bits · read-write · current Port or trunk capabilities.
| ||||
| CportAutonegotiation | 1.3.6.1.4.1.259.6.10.94.1.2.1.1.7 | EnabledStatus | RW | |
column · EnabledStatus · read-write · current Whether auto-negotiation is enabled. | ||||
| CportSpeedDpxStatus | 1.3.6.1.4.1.259.6.10.94.1.2.1.1.8 | INTEGER | RO | |
column · INTEGER · read-only · current The operating speed and duplex mode of the switched port or trunk. If the entry represents a trunk, the speed is that of its individual members unless the member ports have been inconsistently configured in which case the value is error(1).
| ||||
| CportFlowCtrlStatus | 1.3.6.1.4.1.259.6.10.94.1.2.1.1.9 | INTEGER | RO | |
column · INTEGER · read-only · current (2) BackPressure flow control mechanism is used. (3) IEEE 802.3 flow control mechanism is used. (4) Flow control mechanism is disabled. If the entry represents a trunk and the member ports have been inconsistently configured then this value is error(1).
| ||||
| CportTrunkIndex | 1.3.6.1.4.1.259.6.10.94.1.2.1.1.10 | Integer32 | RO | |
column · Integer32 · read-only · current The trunk to which this port belongs. A value of 0 means that this port does not belong to any trunk. A value greater than zero means that this port belongs to a trunk in the trunkIndex, defined by the corresponding trunkPorts. | ||||
| CportComboForcedMode | 1.3.6.1.4.1.259.6.10.94.1.2.1.1.12 | INTEGER | RW | |
column · INTEGER · read-write · current This determines the running mode of a combo port. For a non-combo port, this variable has a value of none(1), and setting this variable to none(1) has no effect. For a combo port, this has its own valid values not equal to none(1), and setting this variable to none(1) is not allowed. copperForced(2) is set if user want to force this combo port running in copper mode. copperPreferredAuto(3) is obsoleted, and user shall not set this state. sfpForced(4) is set if user want to force this combo port running in fiber mode. sfpPreferredAuto(5) is set if user want to change copper or fiber mode automatically by SFP transceiver present state. If SFP transceiver is present, this combo port will run in fiber mode, and if SFP transceiver is not present, this combo port will run in copper mode.
| ||||
| CportMasterSlaveModeCfg | 1.3.6.1.4.1.259.6.10.94.1.2.1.1.15 | INTEGER | RW | |
column · INTEGER · read-write · current Configures the PHY mode when auto negotiation is disabled and speed-duplex is 1000full for giga copper port.
| ||||
| NcableDiagMgt | 1.3.6.1.4.1.259.6.10.94.1.2.3 | |||
| ScableDiagCtlAction | 1.3.6.1.4.1.259.6.10.94.1.2.3.1 | Integer32 | RW | |
scalar · Integer32 · read-write · current To execute cable diagnostics on a port, assign cableDiagCtlAction to the value of ifIndex defined by the ifIndex in the IF-MIB. When read, this object always returns 0. | ||||
| TcableDiagResultTable | 1.3.6.1.4.1.259.6.10.94.1.2.3.2 | NA | ||
table · not-accessible · current Table for cable diagnostics result. | ||||
| RcableDiagResultEntry | 1.3.6.1.4.1.259.6.10.94.1.2.3.2.1 | NA | ||
| CcableDiagResultIfIndex | 1.3.6.1.4.1.259.6.10.94.1.2.3.2.1.1 | Integer32 | NA | |
column · Integer32 · not-accessible · current This is defined as the ifIndex. | ||||
| CcableDiagResultStatusPairA | 1.3.6.1.4.1.259.6.10.94.1.2.3.2.1.2 | INTEGER | RO | |
column · INTEGER · read-only · current The result of cable diagnostics. If there is no fault on the cable, the value is ok(2). Value notTestedYet(1) means the pair is not tested yet. Value ok(2) means the pair works well. Value open(3) means there is a lack of continuity between pins at each end of the pair. Value short(4) means conductors are short-circuited together on the pair. Value openShort(5) means the pair has open and short issues. Value crosstalk(6) means the pair is incorrectly connected at one end. Value unknown(7) means pair has an error matching none of the above. Value impedanceMismatch(8) means different quality cables connected together. Value fail(9) means test failed. Value notSupport(10) means cable diagnostics is not supported.
| ||||
| CcableDiagResultStatusPairB | 1.3.6.1.4.1.259.6.10.94.1.2.3.2.1.3 | INTEGER | RO | |
column · INTEGER · read-only · current The result of cable diagnostics. If there is no fault on the cable, the value is ok(2). Value notTestedYet(1) means the pair is not tested yet. Value ok(2) means the pair works well. Value open(3) means there is a lack of continuity between pins at each end of the pair. Value short(4) means conductors are short-circuited together on the pair. Value openShort(5) means the pair has open and short issues. Value crosstalk(6) means the pair is incorrectly connected at one end. Value unknown(7) means pair has an error matching none of the above. Value impedanceMismatch(8) means different quality cables connected together. Value fail(9) means test failed. Value notSupport(10) means cable diagnostics is not supported.
| ||||
| CcableDiagResultDistancePairA | 1.3.6.1.4.1.259.6.10.94.1.2.3.2.1.6 | Integer32 | RO | |
column · Integer32 · read-only · current Displays the fault distance of pair A of the cable in meters. | ||||
| CcableDiagResultDistancePairB | 1.3.6.1.4.1.259.6.10.94.1.2.3.2.1.7 | Integer32 | RO | |
column · Integer32 · read-only · current Displays the fault distance of pair B of the cable in meters. | ||||
| CcableDiagResultTime | 1.3.6.1.4.1.259.6.10.94.1.2.3.2.1.11 | DisplayString (SIZE (0..20)) | RO | |
column · DisplayString (SIZE (0..20)) · read-only · current Displays the last time of cable diagnostics. For example, 'Jan 1 02:03:04 2002'. | ||||
| TportUtilTable | 1.3.6.1.4.1.259.6.10.94.1.2.6 | NA | ||
table · not-accessible · current Dispalys port utilization during recent 300 seconds. | ||||
| RportUtilEntry | 1.3.6.1.4.1.259.6.10.94.1.2.6.1 | NA | ||
row · not-accessible · current Dispalys port utilization during recent 300 seconds.
| ||||
| CportUtilIfIndex | 1.3.6.1.4.1.259.6.10.94.1.2.6.1.1 | Integer32 | NA | |
column · Integer32 · not-accessible · current The port and trunk interface of the portUtilTable. The interface identified by a particular value of this index is the same interface identified by the same value of ifIndex in the IF-MIB. | ||||
| CportInOctetRate | 1.3.6.1.4.1.259.6.10.94.1.2.6.1.2 | Counter64 | RO | |
column · Counter64 · read-only · current The input octet rate (kbits/sec) of the port. | ||||
| CportInPacketRate | 1.3.6.1.4.1.259.6.10.94.1.2.6.1.3 | Counter64 | RO | |
column · Counter64 · read-only · current The input packet rate (pkts/sec) of the port. | ||||
| CportInUtil | 1.3.6.1.4.1.259.6.10.94.1.2.6.1.4 | Integer32 | RO | |
column · Integer32 · read-only · current The input utilization of the port, in one per hundred. | ||||
| CportOutOctetRate | 1.3.6.1.4.1.259.6.10.94.1.2.6.1.5 | Counter64 | RO | |
column · Counter64 · read-only · current The output octet rate (kbits/sec) of the port. | ||||
| CportOutPacketRate | 1.3.6.1.4.1.259.6.10.94.1.2.6.1.6 | Counter64 | RO | |
column · Counter64 · read-only · current The output packet rate (pkts/sec) of the port. | ||||
| CportOutUtil | 1.3.6.1.4.1.259.6.10.94.1.2.6.1.7 | Integer32 | RO | |
column · Integer32 · read-only · current The output utilization of the port, in one per hundred. | ||||
| NtrunkMgt | 1.3.6.1.4.1.259.6.10.94.1.3 | |||
| StrunkMaxId | 1.3.6.1.4.1.259.6.10.94.1.3.1 | Integer32 | RO | |
scalar · Integer32 · read-only · current The maximum number for a trunk identifier. | ||||
| StrunkValidNumber | 1.3.6.1.4.1.259.6.10.94.1.3.2 | Integer32 | RO | |
scalar · Integer32 · read-only · current The number of valid trunks. | ||||
| TtrunkTable | 1.3.6.1.4.1.259.6.10.94.1.3.3 | NA | ||
table · not-accessible · current Table describing the configuration and status of each trunk. | ||||
| RtrunkEntry | 1.3.6.1.4.1.259.6.10.94.1.3.3.1 | NA | ||
row · not-accessible · current An entry describing the configuration and status of a particular trunk.
| ||||
| CtrunkIndex | 1.3.6.1.4.1.259.6.10.94.1.3.3.1.1 | Integer32 | NA | |
column · Integer32 · not-accessible · current Identifies the trunk within the switch that is described by the table entry. | ||||
| CtrunkPorts | 1.3.6.1.4.1.259.6.10.94.1.3.3.1.2 | PortList | RC | |
column · PortList · read-create · current The complete set of ports currently associated with this trunk. | ||||
| CtrunkCreation | 1.3.6.1.4.1.259.6.10.94.1.3.3.1.3 | INTEGER | RO | |
column · INTEGER · read-only · current A value of static(1) means a statically configured trunk. A value of lacp(2) means an LACP-configured trunk.
| ||||
| CtrunkStatus | 1.3.6.1.4.1.259.6.10.94.1.3.3.1.4 | ValidStatus | RC | |
column · ValidStatus · read-create · current Writing this to valid(1) creates an entry. Writing this to invalid(2) destroys an entry. A trunk created by LACP cannot be manually destroyed or (re)configured. | ||||
| NlacpMgt | 1.3.6.1.4.1.259.6.10.94.1.4 | |||
| TlacpPortTable | 1.3.6.1.4.1.259.6.10.94.1.4.1 | NA | ||
table · not-accessible · current Table for LACP port configuration. | ||||
| RlacpPortEntry | 1.3.6.1.4.1.259.6.10.94.1.4.1.1 | NA | ||
row · not-accessible · current Entry for LACP port configuration. While an entry may exist for a particular port, the port may not support LACP and an attempt to enable LACP may result in failure.
| ||||
| ClacpPortIndex | 1.3.6.1.4.1.259.6.10.94.1.4.1.1.1 | Integer32 | NA | |
column · Integer32 · not-accessible · current The port interface of the lacpPortTable. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex in the IF-MIB. | ||||
| ClacpPortStatus | 1.3.6.1.4.1.259.6.10.94.1.4.1.1.2 | EnabledStatus | RW | |
column · EnabledStatus · read-write · current Whether 802.3ad LACP is enabled. | ||||
| NstaMgt | 1.3.6.1.4.1.259.6.10.94.1.5 | |||
| SstaSystemStatus | 1.3.6.1.4.1.259.6.10.94.1.5.1 | EnabledStatus | RW | |
scalar · EnabledStatus · read-write · current Global spanning tree status. (1) Spanning tree protocol is enabled. (2) Spanning tree protocol is disabled. | ||||
| TstaPortTable | 1.3.6.1.4.1.259.6.10.94.1.5.2 | NA | ||
table · not-accessible · current The table manages port settings for Spanning Tree Protocol 802.1d, 802.1w or 802.1s depending on the value specified by staProtocolType. | ||||
| RstaPortEntry | 1.3.6.1.4.1.259.6.10.94.1.5.2.1 | NA | ||
| CstaPortFastForward | 1.3.6.1.4.1.259.6.10.94.1.5.2.1.2 | EnabledStatus | RW | |
column · EnabledStatus · read-write · current Whether fast forwarding is enabled. | ||||
| CstaPortProtocolMigration | 1.3.6.1.4.1.259.6.10.94.1.5.2.1.3 | TruthValue | RW | |
column · TruthValue · read-write · current When operating in RSTP (version 2) mode, writing true(1) to this object forces this port to transmit RSTP BPDUs. Any other operation on this object has no effect and it always returns false(2) when read. | ||||
| CstaPortOperEdgePort | 1.3.6.1.4.1.259.6.10.94.1.5.2.1.5 | TruthValue | RO | |
column · TruthValue · read-only · current The operational value of the edge port parameter. The object is initialized to the value of staPortAdminEdgePort and is set false when a BPDU is received. | ||||
| CstaPortAdminPointToPoint | 1.3.6.1.4.1.259.6.10.94.1.5.2.1.6 | INTEGER | RW | |
column · INTEGER · read-write · current The administrative point-to-point status of the LAN segment attached to this port. A value of forceTrue(0) indicates that this port should always be treated as if it is connected to a point-to-point link. A value of forceFalse(1) indicates that this port should be treated as having a shared media connection. A value of auto(2) indicates that this port is considered to have a point-to-point link if it is an Aggregator and all of its members are aggregatable, or if the MAC entity is configured for full duplex operation, either through auto-negotiation or by management means.
| ||||
| CstaPortOperPointToPoint | 1.3.6.1.4.1.259.6.10.94.1.5.2.1.7 | TruthValue | RO | |
column · TruthValue · read-only · current The operational point-to-point status of the LAN segment attached to this port. This indicates whether a port is considered to have a point-to-point connection or not. The value is determined by management or by auto-detection, as described in the staPortAdminPointToPoint object. | ||||
| CstaPortSystemStatus | 1.3.6.1.4.1.259.6.10.94.1.5.2.1.9 | EnabledStatus | RW | |
column · EnabledStatus · read-write · current Per-port spanning tree status. (1) Spanning tree protocol is enabled. (2) Spanning tree protocol is disabled. | ||||
| CstaPortLongAdminPathCost | 1.3.6.1.4.1.259.6.10.94.1.5.2.1.10 | Integer32 (0..200000000) | RW | |
column · Integer32 (0..200000000) · read-write · current The admin value of the RSTP path cost or MST external pathcost. The contribution of this port to the path cost (in 32 bits value) of paths towards the spanning tree root which include this port. This object is used to configure the spanning tree port path cost in the 32-bit value range when the staPathCostMethod is long(2). If the staPathCostMethod is short(1), this mib object is not instantiated. Setting this to 0 means that the path cost is automatically determined. In this case, read staPortLongOperPathCost to get the oper value. | ||||
| CstaPortLongOperPathCost | 1.3.6.1.4.1.259.6.10.94.1.5.2.1.11 | Integer32 (1..200000000) | RO | |
column · Integer32 (1..200000000) · read-only · current The oper value of the RSTP path cost or MST external pathcost. The contribution of this port to the path cost (in 32 bits value) of paths towards the spanning tree root which include this port. This object is used to configure the spanning tree port path cost in the 32-bit value range when the staPathCostMethod is long(2). If the staPathCostMethod is short(1), this mib object is not instantiated. | ||||
| CstaPortRootGuardAdminStatus | 1.3.6.1.4.1.259.6.10.94.1.5.2.1.13 | EnabledStatus | RW | |
column · EnabledStatus · read-write · current Specifies the desired status of the root guard. This variable configures the root guard feature to enforce the root bridge placement in the network. | ||||
| CstaPortRootGuardOperStatus | 1.3.6.1.4.1.259.6.10.94.1.5.2.1.14 | EnabledStatus | RO | |
column · EnabledStatus · read-only · current The current operational status of the root guard which provides a way to enforce the root bridge placement in the network. | ||||
| CstaPortBpduGuard | 1.3.6.1.4.1.259.6.10.94.1.5.2.1.15 | EnabledStatus | RW | |
column · EnabledStatus · read-write · current A value of enabled(1) indicates that BPDU port guard feature is enabled for each port. A value of disabled(2) indicates that the feature is disabled. | ||||
| CstaPortAdminEdgePortWithAuto | 1.3.6.1.4.1.259.6.10.94.1.5.2.1.17 | INTEGER | RW | |
column · INTEGER · read-write · current The administrative value of the edge port parameter. A value of enable(1) indicates that this port should be assumed as an edge-port, a value of disable(2) indicates that this port should be assumed as a non-edge-port and a value of auot (3) indicates this port in RSPT or MSTP mode should be assumed as an edge-port after migration or max age expire without receiving any BPDU and sending BPDU with proposal flag on.
| ||||
| CstaPortBpduFilter | 1.3.6.1.4.1.259.6.10.94.1.5.2.1.18 | EnabledStatus | RW | |
column · EnabledStatus · read-write · current The administrative value of the BPDU filter parameter. A value of enabled(1) indicates that this port will avoid transmitting BPDUs on edge-port and the value of disabled(2) indicates that this port will not avoid transmitting BPDUs on edge-port. | ||||
| CstaPortBpduGuardAutoRecovery | 1.3.6.1.4.1.259.6.10.94.1.5.2.1.19 | EnabledStatus | RW | |
column · EnabledStatus · read-write · current A value of enabled(1) indicates that BPDU port guard auto recovery mechanism is enabled for this port. A value of disabled(2) indicates that the mechanism is disabled. | ||||
| CstaPortBpduGuardAutoRecoveryInterval | 1.3.6.1.4.1.259.6.10.94.1.5.2.1.20 | Unsigned32 (30..86400) | RW | |
column · Unsigned32 (30..86400) · read-write · current The interval in seconds used by BPDU guard auto recovery mechanism. | ||||
| SstaProtocolType | 1.3.6.1.4.1.259.6.10.94.1.5.3 | INTEGER | RW | |
scalar · INTEGER · read-write · current The version of Spanning Tree Protocol the bridge is currently running. The value 'stp(1)' indicates the Spanning Tree Protocol is as specified in IEEE 802.1D,'rstp(2)' indicates that the Rapid Spanning Tree Protocol is as specified in IEEE 802.1w, and the value 'mstp(3)' indicates that the Multiple Spanning Tree Protocol is as specified in IEEE 802.1s. New values may be defined in the future as new or updated versions of the protocol become available.
| ||||
| SstaTxHoldCount | 1.3.6.1.4.1.259.6.10.94.1.5.4 | Integer32 (1..10) | RW | |
scalar · Integer32 (1..10) · read-write · current The value used by the Port Transmit state machine to limit the maximum transmission rate. | ||||
| SstaPathCostMethod | 1.3.6.1.4.1.259.6.10.94.1.5.5 | StaPathCostMode | RW | |
scalar · StaPathCostMode · read-write · current Indicates the type of spanning tree path cost mode configured on the switch. This mode applies to all instances of the spanning tree protocol running on the switch. When the value of this MIB object is changed, the path cost of all ports will be reassigned to the default path cost values based on the new spanning tree path cost mode and the ports' speed. When the value of this MIB object is set to long(2), the staPortLongPathCost MIB object must be used to retrieve/configure the spanning tree port path cost as a 32-bit value. The set operation on dot1dStpPortPathCost in BRIDGE-MIB will be rejected. While retrieving the value of dot1dStpPortPathCost, the maximum value of 65535 will be returned if the value of staPortLongPathCost for the same instance exceeds 65535. When the value of this MIB object is set to short(1), the dot1dStpPortPathCost in BRIDGE-MIB must be used. | ||||
| NxstMgt | 1.3.6.1.4.1.259.6.10.94.1.5.6 | |||
| SmstName | 1.3.6.1.4.1.259.6.10.94.1.5.6.1 | DisplayString (SIZE (0..32)) | RW | |
scalar · DisplayString (SIZE (0..32)) · read-write · current The name of the Multiple Spanning Tree region. | ||||
| SmstRevision | 1.3.6.1.4.1.259.6.10.94.1.5.6.2 | Integer32 | RW | |
scalar · Integer32 · read-write · current The Revision number of the Multiple Spanning Tree region. | ||||
| SmstMaxHops | 1.3.6.1.4.1.259.6.10.94.1.5.6.3 | Integer32 (1..40) | RW | |
scalar · Integer32 (1..40) · read-write · current The max hop number counts of the Multiple Spanning Tree region. | ||||
| TxstInstanceCfgTable | 1.3.6.1.4.1.259.6.10.94.1.5.6.4 | NA | ||
table · not-accessible · current This table is used to configure the property of a specific instance in Multiple Spanning Tree or Rapid Spanning Tree. If Rapid Spanning Tree protocol is in use, the mstInstanceEditIndex is always 0. | ||||
| RxstInstanceCfgEntry | 1.3.6.1.4.1.259.6.10.94.1.5.6.4.1 | NA | ||
row · not-accessible · current A conceptual row containing the property of the RST or MST instance.
| ||||
| CxstInstanceCfgIndex | 1.3.6.1.4.1.259.6.10.94.1.5.6.4.1.1 | Integer32 (0..4094) | NA | |
column · Integer32 (0..4094) · not-accessible · current An arbitrary integer within the range from 1 to the value of the maximum instance that uniquely identifies a spanning tree instance. | ||||
| CxstInstanceCfgPriority | 1.3.6.1.4.1.259.6.10.94.1.5.6.4.1.2 | Integer32 (0..61440) | RW | |
column · Integer32 (0..61440) · read-write · current The priority of a specific spanning tree instance. The value assigned should be in the range 0-61440 in steps of 4096. | ||||
| CxstInstanceCfgTimeSinceTopologyChange | 1.3.6.1.4.1.259.6.10.94.1.5.6.4.1.3 | TimeTicks | RO | |
column · TimeTicks · read-only · current The time (in hundredths of a second) since the last topology change detected by the bridge entity in RST or MST. | ||||
| CxstInstanceCfgTopChanges | 1.3.6.1.4.1.259.6.10.94.1.5.6.4.1.4 | Integer32 | RO | |
column · Integer32 · read-only · current The total number of topology changes detected by this bridge in RST or MST since the management entity was last reset or initialized. | ||||
| CxstInstanceCfgDesignatedRoot | 1.3.6.1.4.1.259.6.10.94.1.5.6.4.1.5 | BridgeId | RO | |
column · BridgeId · read-only · current The bridge identifier of the root of the spanning tree as determined by the Multiple Spanning Tree Protocol. (802.1s) or Rapid Spanning Tree Protocol (802.1w) executed by this node. This value is used as the root identifier parameter in all configuration bridge PDUs originated by this node. | ||||
| CxstInstanceCfgRootCost | 1.3.6.1.4.1.259.6.10.94.1.5.6.4.1.6 | Integer32 | RO | |
column · Integer32 · read-only · current The cost of the path to the root as seen from this bridge of the RST or MST. | ||||
| CxstInstanceCfgRootPort | 1.3.6.1.4.1.259.6.10.94.1.5.6.4.1.7 | Integer32 | RO | |
column · Integer32 · read-only · current The number of the port which offers the lowest cost path from this bridge to the root bridge of the RST or MST. | ||||
| CxstInstanceCfgMaxAge | 1.3.6.1.4.1.259.6.10.94.1.5.6.4.1.8 | Timeout | RO | |
column · Timeout · read-only · current The maximum age of Multiple Spanning Tree Protocol (802.1s) or Rapid Spanning Tree Protocol (802.1w) information learned from the network on any port before it is discarded, in units of hundredths of a second. This is the actual value that this bridge is currently using. | ||||
| CxstInstanceCfgHelloTime | 1.3.6.1.4.1.259.6.10.94.1.5.6.4.1.9 | Timeout | RO | |
column · Timeout · read-only · current The amount of time between the transmission of configuration bridge PDUs by this node on any port when it is the root of the specific spanning tree or trying to become so, in units of hundredths of a second. This is the actual value that this bridge is currently using in RST or MST. | ||||
| CxstInstanceCfgHoldTime | 1.3.6.1.4.1.259.6.10.94.1.5.6.4.1.10 | Timeout | RO | |
column · Timeout · read-only · current This time value determines the interval length during which no more than two configuration bridge PDUs shall be transmitted by this node, in units of hundredths of a second. | ||||
| CxstInstanceCfgForwardDelay | 1.3.6.1.4.1.259.6.10.94.1.5.6.4.1.11 | Timeout | RO | |
column · Timeout · read-only · current For RST or MST protocol, this time value, measured in units of hundredths of a second, controls how fast a port changes its spanning state when moving towards the forwarding state. The value determines how long the port stays in each of the listening and learning states, which precede the forwarding state. This value is also used, when a topology change has been detected and is underway, to age all dynamic entries in the forwarding database. This value is the current value being used by the bridge. xstInstanceCfgBridgeForwardDelay defines the value that this bridge and all others would start using if/when this bridge were to become the root. | ||||
| CxstInstanceCfgBridgeMaxAge | 1.3.6.1.4.1.259.6.10.94.1.5.6.4.1.12 | Timeout | RO | |
column · Timeout · read-only · current For RST or MST protocol, the time (in hundredths of second) that all bridges use for MaxAge when this bridge is acting as the root. Note that 802.1D-1990 specifies that the range for this parameter is related to the value of xstInstanceCfgBridgeHelloTime. The granularity of this timer is specified by 802.1D-1990 to be 1 second. | ||||
| CxstInstanceCfgBridgeHelloTime | 1.3.6.1.4.1.259.6.10.94.1.5.6.4.1.13 | Timeout | RO | |
column · Timeout · read-only · current For RST or MST protocol,the time (in hundredths of a second) that all bridges use for HelloTime when this bridge is acting as the root. The granularity of this timer is specified by 802.1D-1990 to be 1 second. | ||||
| CxstInstanceCfgBridgeForwardDelay | 1.3.6.1.4.1.259.6.10.94.1.5.6.4.1.14 | Timeout | RO | |
column · Timeout · read-only · current For RST or MST protocol, the time (in hundredths of a second) that all bridges use for ForwardDelay when this bridge is acting as the root. Note that 802.1D-1990 specifies that the range for this parameter is related to the value of xstInstanceCfgBridgeMaxAge. The granularity of this timer is specified by 802.1D-1990 to be 1 second. | ||||
| CxstInstanceCfgTxHoldCount | 1.3.6.1.4.1.259.6.10.94.1.5.6.4.1.15 | Integer32 | RO | |
column · Integer32 · read-only · current For RST or MST protocol, the value used by the port transmit state machine to limit the maximum transmission rate. | ||||
| CxstInstanceCfgPathCostMethod | 1.3.6.1.4.1.259.6.10.94.1.5.6.4.1.16 | StaPathCostMode | RO | |
column · StaPathCostMode · read-only · current For RST or MST protocol, this indicates the type of spanning tree path cost mode used by the switch. The mode applies to all instances of the Spanning Tree protocol running on the switch. When the value of this MIB object is changed, the path cost of all ports will be reassigned to the default path cost values based on the new spanning tree path cost mode and the ports' speed. When the value of this MIB object is set to long(2), the xstInstancePortPathCost MIB object must be used in order to retrieve/configure the spanning tree port path cost as a 32-bit value. The set operation on dot1dStpPortPathCost in BRIDGE-MIB will be rejected. While retrieving the value of dot1dStpPortPathCost, the maximum value of 65535 will be returned if the value of xstInstancePortPathCost for the same instance exceeds 65535. When the value of this MIB object is set to short(1), the dot1dStpPortPathCost in BRIDGE-MIB must be used. | ||||
| TxstInstancePortTable | 1.3.6.1.4.1.259.6.10.94.1.5.6.5 | NA | ||
table · not-accessible · current The extension table for dot1dStpPortEntry to provide additional Spanning Tree information and configuration. | ||||
| RxstInstancePortEntry | 1.3.6.1.4.1.259.6.10.94.1.5.6.5.1 | NA | ||
row · not-accessible · current The conceptual row for xstInstancePortTable. | ||||
| CxstInstancePortInstance | 1.3.6.1.4.1.259.6.10.94.1.5.6.5.1.1 | Integer32 | NA | |
column · Integer32 · not-accessible · current The instance of the MSTP. | ||||
| CxstInstancePortPort | 1.3.6.1.4.1.259.6.10.94.1.5.6.5.1.2 | Integer32 | NA | |
column · Integer32 · not-accessible · current The port and the trunk (excluding trunk member ports) interface of the mstInstancePortTable. The interface identified by a particular value of this index is the same interface as identified by the same value of dot1dStpPort in the BRIDGE-MIB. | ||||
| CxstInstancePortPriority | 1.3.6.1.4.1.259.6.10.94.1.5.6.5.1.3 | Integer32 (0..240) | RW | |
column · Integer32 (0..240) · read-write · current Defines the priority used for this port in the Spanning Tree Algorithm. If the path cost for all ports on a switch is the same, the port with the highest priority (i.e., lowest value) will be configured as an active link in the Spanning Tree. This makes a port with higher priority less likely to be blocked if the Spanning Tree Algorithm is detecting network loops. Where more than one port is assigned the highest priority, the port with lowest numeric identifier will be enabled. | ||||
| CxstInstancePortState | 1.3.6.1.4.1.259.6.10.94.1.5.6.5.1.4 | INTEGER | RO | |
column · INTEGER · read-only · current The port's current state as defined by application of
the Spanning Tree Protocol. This state controls what
action a port takes on reception of a frame:
discarding(1): Port receives configuration messages,
but does not forward packets.
learning(2): Port has transmitted configuration messages
for an interval set by the Forward Delay
parameter without receiving contradictory
information. Port address table is cleared,
and the port begins learning addresses.
forwarding(3): Port forwards packets, and continues learning
addresses.
For ports which are disabled (see xstInstancePortEnable),
this object will have a value of discarding(1).
| ||||
| CxstInstancePortEnable | 1.3.6.1.4.1.259.6.10.94.1.5.6.5.1.5 | EnabledStatus | RO | |
column · EnabledStatus · read-only · current The enabled/disabled status of the port. | ||||
| CxstInstancePortPathCost | 1.3.6.1.4.1.259.6.10.94.1.5.6.5.1.6 | Integer32 (1..200000000) | RW | |
column · Integer32 (1..200000000) · read-write · current The pathcost of the RST or MST in the range 1 to 200000000. This parameter is used to determine the best path between devices. Therefore, lower values should be assigned to ports attached to faster media, and higher values assigned to ports with slower media. (Path cost takes precedence over port priority). | ||||
| CxstInstancePortDesignatedRoot | 1.3.6.1.4.1.259.6.10.94.1.5.6.5.1.7 | BridgeId | RO | |
column · BridgeId · read-only · current The unique bridge identifier of the bridge recorded as the root in the configuration BPDUs transmitted by the designated bridge for the segment to which the port is attached. | ||||
| CxstInstancePortDesignatedCost | 1.3.6.1.4.1.259.6.10.94.1.5.6.5.1.8 | Integer32 | RO | |
column · Integer32 · read-only · current The path cost of the designated port of the segment connected to this port. This value is compared to the root path cost field in received bridge PDUs. | ||||
| CxstInstancePortDesignatedBridge | 1.3.6.1.4.1.259.6.10.94.1.5.6.5.1.9 | BridgeId | RO | |
column · BridgeId · read-only · current The bridge identifier of the bridge which this port considers to be the designated bridge for this port's segment. | ||||
| CxstInstancePortDesignatedPort | 1.3.6.1.4.1.259.6.10.94.1.5.6.5.1.10 | OCTET STRING (SIZE (2)) | RO | |
column · OCTET STRING (SIZE (2)) · read-only · current The port identifier of the port on the designated bridge for this port's segment. | ||||
| CxstInstancePortForwardTransitions | 1.3.6.1.4.1.259.6.10.94.1.5.6.5.1.11 | Counter32 | RO | |
column · Counter32 · read-only · current The number of times this port has transitioned from the learning state to the forwarding state. | ||||
| CxstInstancePortPortRole | 1.3.6.1.4.1.259.6.10.94.1.5.6.5.1.12 | INTEGER | RO | |
column · INTEGER · read-only · current The role of the port in the RST or MST protocol:
(1) The port has no role within the spanning tree
(2) The port is part of the active topology connecting
the bridge to the root bridge (i.e., root port)
(3) The port is connecting a LAN through the bridge to the
root bridge (i.e., designated port)
(4) The port may provide connectivity if other
bridges, bridge ports, or LANs fail or are removed.
(5) The port provides backup if other
bridges, bridge ports, or LANs fail or are removed.
(6) For MST protocol only, indicates whether this instance
is in a master role.
| ||||
| CxstInstancePortAdminPathCost | 1.3.6.1.4.1.259.6.10.94.1.5.6.5.1.13 | Integer32 (1..200000000) | RW | |
column · Integer32 (1..200000000) · read-write · current The admin value of the RST pathcost or MST internal pathcost, in the range of 1 to 200000000. This parameter is used to determine the best path between devices. Therefore, lower values should be assigned to ports attached to faster media, and higher values assigned to ports with slower media. (Path cost takes precedence over port priority). | ||||
| CxstInstancePortOperPathCost | 1.3.6.1.4.1.259.6.10.94.1.5.6.5.1.14 | Integer32 (1..200000000) | RO | |
column · Integer32 (1..200000000) · read-only · current The oper value of the RST pathcost or MST internal pathcost, in the range of 1 to 200000000. This parameter is used to determine the best path between devices. Therefore, lower values should be assigned to ports attached to faster media, and higher values assigned to ports with slower media. (Path cost takes precedence over port priority). | ||||
| TmstInstanceEditTable | 1.3.6.1.4.1.259.6.10.94.1.5.6.6 | NA | ||
table · not-accessible · current The Multiple Spanning Tree region instance vlan configuration table. Please read the actual instance vlan mapped in the mstInstanceOperTable. | ||||
| RmstInstanceEditEntry | 1.3.6.1.4.1.259.6.10.94.1.5.6.6.1 | NA | ||
row · not-accessible · current A conceptual row containing the status of the MSTP instance.
| ||||
| CmstInstanceEditIndex | 1.3.6.1.4.1.259.6.10.94.1.5.6.6.1.1 | Integer32 (0..4094) | NA | |
column · Integer32 (0..4094) · not-accessible · current An arbitrary integer within the range from 1 to the value of the maximum instance that uniquely identifies a spanning tree instance. | ||||
| CmstInstanceEditVlansMap | 1.3.6.1.4.1.259.6.10.94.1.5.6.6.1.2 | OCTET STRING (SIZE (0..128)) | RC | |
column · OCTET STRING (SIZE (0..128)) · read-create · current A string of octets containing one bit per VLAN. The first octet corresponds to VLANs with vlanIndex values of 0 through 7; the second octet to VLANs 8 through 15; etc., The most significant bit of each octet corresponds to the lowest value vlanIndex in that octet. For each VLAN, if it is mapped to this MSTP instance, then the bit corresponding to that VLAN is set to '1'. To create a row, write any of mstInstanceEditVlansMap, mstInstanceEditVlansMap2k, mstInstanceEditVlansMap3k or mstInstanceEditVlansMap4k, to a non-empty list. To destroy a row, write all of these four variables to an empty list. | ||||
| CmstInstanceEditVlansMap2k | 1.3.6.1.4.1.259.6.10.94.1.5.6.6.1.3 | OCTET STRING (SIZE (0..128)) | RC | |
column · OCTET STRING (SIZE (0..128)) · read-create · current A string of octets containing one bit per VLAN for VLANS with vlanIndex values of 1024 through 2047. The first octet corresponds to VLANs with vlanIndex values of 1024 through 1031; the second octet to VLANs 1032 through 1039; etc. The most significant bit of each octet corresponds to the lowest value vlanIndex in that octet. For each VLAN, if it is mapped to this MSTP instance, then the bit corresponding to that VLAN is set to '1'. To create a row, write any of mstInstanceEditVlansMap, mstInstanceEditVlansMap2k, mstInstanceEditVlansMap3k or mstInstanceEditVlansMap4k, to a non-empty list. To destroy a row, write all of these four variables to an empty list. | ||||
| CmstInstanceEditVlansMap3k | 1.3.6.1.4.1.259.6.10.94.1.5.6.6.1.4 | OCTET STRING (SIZE (0..128)) | RC | |
column · OCTET STRING (SIZE (0..128)) · read-create · current A string of octets containing one bit per VLAN for VLANS with vlanIndex values of 2048 through 3071. The first octet corresponds to VLANs with vlanIndex values of 2048 through 2055; the second octet to VLANs 2056 through 2063; etc. The most significant bit of each octet corresponds to the lowest value vlanIndex in that octet. For each VLAN, if it is mapped to this MSTP instance, then the bit corresponding to that VLAN is set to '1'. To create a row, write any of mstInstanceEditVlansMap, mstInstanceEditVlansMap2k, mstInstanceEditVlansMap3k or mstInstanceEditVlansMap4k, to a non-empty list. To destroy a row, write all of these four variables to an empty list. | ||||
| CmstInstanceEditVlansMap4k | 1.3.6.1.4.1.259.6.10.94.1.5.6.6.1.5 | OCTET STRING (SIZE (0..128)) | RC | |
column · OCTET STRING (SIZE (0..128)) · read-create · current A string of octets containing one bit per VLAN for VLANS with vlanIndex values of 3072 through 4095. The first octet corresponds to VLANs with vlanIndex values of 3072 through 3079; the second octet to VLANs 3080 through 3087; etc. The most significant bit of each octet corresponds to the lowest value vlanIndex in that octet. For each VLAN, if it is mapped to this MSTP instance, then the bit corresponding to that VLAN is set to '1'. To create a row, write any of mstInstanceEditVlansMap, mstInstanceEditVlansMap2k, mstInstanceEditVlansMap3k or mstInstanceEditVlansMap4k, to a non-empty list. To destroy a row, write all of these four variables to an empty list. | ||||
| CmstInstanceEditRemainingHops | 1.3.6.1.4.1.259.6.10.94.1.5.6.6.1.6 | Integer32 | RO | |
column · Integer32 · read-only · current The remaining hop count for this MST instance. | ||||
| TmstInstanceOperTable | 1.3.6.1.4.1.259.6.10.94.1.5.6.7 | NA | ||
table · not-accessible · current The Multiple Spanning Tree region instance vlan mapped table. | ||||
| RmstInstanceOperEntry | 1.3.6.1.4.1.259.6.10.94.1.5.6.7.1 | NA | ||
row · not-accessible · current A conceptual row containing the status of the MSTP instance.
| ||||
| CmstInstanceOperIndex | 1.3.6.1.4.1.259.6.10.94.1.5.6.7.1.1 | Integer32 (0..4094) | NA | |
column · Integer32 (0..4094) · not-accessible · current An arbitrary integer within the range from 1 to the value of the maximum instance that uniquely identifies a spanning tree instance. | ||||
| CmstInstanceOperVlansMap | 1.3.6.1.4.1.259.6.10.94.1.5.6.7.1.2 | OCTET STRING (SIZE (0..128)) | RO | |
column · OCTET STRING (SIZE (0..128)) · read-only · current A string of octets containing one bit per VLAN. The first octet corresponds to VLANs with vlanIndex values of 0 through 7; the second octet to VLANs 8 through 15; etc., The most significant bit of each octet corresponds to the lowest value vlanIndex in that octet. For each VLAN, if it is mapped to this MSTP instance, then the bit corresponding to that VLAN is set to '1'. | ||||
| CmstInstanceOperVlansMap2k | 1.3.6.1.4.1.259.6.10.94.1.5.6.7.1.3 | OCTET STRING (SIZE (0..128)) | RO | |
column · OCTET STRING (SIZE (0..128)) · read-only · current A string of octets containing one bit per VLAN for VLANS with vlanIndex values of 1024 through 2047. The first octet corresponds to VLANs with vlanIndex values of 1024 through 1031; the second octet to VLANs 1032 through 1039; etc. The most significant bit of each octet corresponds to the lowest value vlanIndex in that octet. For each VLAN, if it is mapped to this MSTP instance, then the bit corresponding to that VLAN is set to '1'. | ||||
| CmstInstanceOperVlansMap3k | 1.3.6.1.4.1.259.6.10.94.1.5.6.7.1.4 | OCTET STRING (SIZE (0..128)) | RO | |
column · OCTET STRING (SIZE (0..128)) · read-only · current A string of octets containing one bit per VLAN for VLANS with vlanIndex values of 2048 through 3071. The first octet corresponds to VLANs with vlanIndex values of 2048 through 2055; the second octet to VLANs 2056 through 2063; etc. The most significant bit of each octet corresponds to the lowest value vlanIndex in that octet. For each VLAN, if it is mapped to this MSTP instance, then the bit corresponding to that VLAN is set to '1'. | ||||
| CmstInstanceOperVlansMap4k | 1.3.6.1.4.1.259.6.10.94.1.5.6.7.1.5 | OCTET STRING (SIZE (0..128)) | RO | |
column · OCTET STRING (SIZE (0..128)) · read-only · current A string of octets containing one bit per VLAN for VLANS with vlanIndex values of 3072 through 4095. The first octet corresponds to VLANs with vlanIndex values of 3072 through 3079; the second octet to VLANs 3080 through 3087; etc. The most significant bit of each octet corresponds to the lowest value vlanIndex in that octet. For each VLAN, if it is mapped to this MSTP instance, then the bit corresponding to that VLAN is set to '1'. | ||||
| TstaLoopbackDetectionPortTable | 1.3.6.1.4.1.259.6.10.94.1.5.7 | NA | ||
table · not-accessible · current A table provides the mechanism to configure the spanning tree loopback detection of each port or trunk | ||||
| RstaLoopbackDetectionPortEntry | 1.3.6.1.4.1.259.6.10.94.1.5.7.1 | NA | ||
row · not-accessible · current A conceptual row of staLoopbackDetectionPortTable. | ||||
| CstaLoopbackDetectionPortIfIndex | 1.3.6.1.4.1.259.6.10.94.1.5.7.1.1 | InterfaceIndex | NA | |
column · InterfaceIndex · not-accessible · current The port and the trunk interfaces of the portTable. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex in the IF-MIB. | ||||
| CstaLoopbackDetectionPortStatus | 1.3.6.1.4.1.259.6.10.94.1.5.7.1.2 | EnabledStatus | RW | |
column · EnabledStatus · read-write · current Status of the port on whether spanning tree loopback detection is enabled. | ||||
| CstaLoopbackDetectionPortTrapStatus | 1.3.6.1.4.1.259.6.10.94.1.5.7.1.3 | EnabledStatus | RW | |
column · EnabledStatus · read-write · current The parameter indicates whether the trap has to be sent when the loopback BPDUs have been detected. | ||||
| CstaLoopbackDetectionPortReleaseMode | 1.3.6.1.4.1.259.6.10.94.1.5.7.1.4 | INTEGER | RW | |
column · INTEGER · read-write · current Setting it to auto(1) indicates that this port can be released from discarding state automatically after loopback has occurred. Setting it to manual(2) indicates that this port can be released from discarding state manually after loopback has occurred.
| ||||
| CstaLoopbackDetectionPortRelease | 1.3.6.1.4.1.259.6.10.94.1.5.7.1.5 | INTEGER | RW | |
column · INTEGER · read-write · current Set this to release(2) to release the port from discarding state. noRelease(1) will always be obtained when reading this variable.
| ||||
| NrestartMgt | 1.3.6.1.4.1.259.6.10.94.1.7 | |||
| SrestartOpCodeFile | 1.3.6.1.4.1.259.6.10.94.1.7.1 | DisplayString (SIZE (0..127)) | RW | |
scalar · DisplayString (SIZE (0..127)) · read-write · current Name of op-code file for start-up. | ||||
| SrestartConfigFile | 1.3.6.1.4.1.259.6.10.94.1.7.2 | DisplayString (SIZE (0..127)) | RW | |
scalar · DisplayString (SIZE (0..127)) · read-write · current Name of configuration file for start-up. | ||||
| SrestartControl | 1.3.6.1.4.1.259.6.10.94.1.7.3 | INTEGER | RW | |
scalar · INTEGER · read-write · current Setting this object to warmBoot(2) causes the device to reinitialize itself such that neither the agent configuration nor the protocol entity implementation is altered. Setting this object to coldBoot(3) causes the device to reinitialize itself such that the agent's configuration or the protocol entity implementation may be altered. When the device is running normally, this variable has a value of running(1).
| ||||
| NmirrorMgt | 1.3.6.1.4.1.259.6.10.94.1.8 | |||
| TmirrorTable | 1.3.6.1.4.1.259.6.10.94.1.8.1 | NA | ||
table · not-accessible · current Table for port mirroring, enabling a port to be mirrored to/from another port. Not all ports can be mirrored and limitations may apply as to which ports can be used as either source or destination ports. | ||||
| RmirrorEntry | 1.3.6.1.4.1.259.6.10.94.1.8.1.1 | NA | ||
row · not-accessible · current The conceptual row of mirrorTable. | ||||
| CmirrorDestinationPort | 1.3.6.1.4.1.259.6.10.94.1.8.1.1.1 | Integer32 | NA | |
column · Integer32 · not-accessible · current The destination port interface for mirrored packets. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex in the IF-MIB. | ||||
| CmirrorSourcePort | 1.3.6.1.4.1.259.6.10.94.1.8.1.1.2 | Integer32 | NA | |
column · Integer32 · not-accessible · current The source port interface for mirrored packets. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex in the IF-MIB. | ||||
| CmirrorType | 1.3.6.1.4.1.259.6.10.94.1.8.1.1.3 | INTEGER | RC | |
column · INTEGER · read-create · current If this value is rx(1), receive packets will be mirrored. If this value is tx(2), transmit packets will be mirrored. If this value is both(3), both receive and transmit packets will be mirrored.
| ||||
| CmirrorStatus | 1.3.6.1.4.1.259.6.10.94.1.8.1.1.4 | ValidStatus | RC | |
column · ValidStatus · read-create · current Setting this to valid(1) creates an entry. Setting this to invalid(2) destroys an entry. | ||||
| TvlanMirrorTable | 1.3.6.1.4.1.259.6.10.94.1.8.2 | NA | ||
table · not-accessible · current Table for VLAN mirroring, enabling a VLAN to be mirrored to a port. | ||||
| RvlanMirrorEntry | 1.3.6.1.4.1.259.6.10.94.1.8.2.1 | NA | ||
row · not-accessible · current The conceptual row of vlanMirrorTable. | ||||
| CvlanMirrorDestinationPort | 1.3.6.1.4.1.259.6.10.94.1.8.2.1.1 | Integer32 | NA | |
column · Integer32 · not-accessible · current The destination port interface for mirrored packets. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex in the IF-MIB. | ||||
| CvlanMirrorSourceVlan | 1.3.6.1.4.1.259.6.10.94.1.8.2.1.2 | Integer32 | NA | |
column · Integer32 · not-accessible · current The source VLAN for mirrored packets. The interface identified by a particular value of this index is the same interface as identified by the same value of dot1qVlanIndex in the Q-BRIDGE-MIB. | ||||
| CvlanMirrorStatus | 1.3.6.1.4.1.259.6.10.94.1.8.2.1.4 | ValidStatus | RC | |
column · ValidStatus · read-create · current Set this to valid(1) to create an entry. Set this to invalid(2) to destroy an entry. | ||||
| NigmpSnoopMgt | 1.3.6.1.4.1.259.6.10.94.1.9 | |||
| SigmpSnoopStatus | 1.3.6.1.4.1.259.6.10.94.1.9.1 | EnabledStatus | RW | |
scalar · EnabledStatus · read-write · current Parameter to enable or disable IGMP snooping on the device. When enabled, the device will examine IGMP packets and set up filters for IGMP ports. | ||||
| SigmpSnoopQuerier | 1.3.6.1.4.1.259.6.10.94.1.9.2 | EnabledStatus | RW | |
scalar · EnabledStatus · read-write · current Enables (disables) whether the switch acts as an IGMP querier. | ||||
| SigmpSnoopQueryCount | 1.3.6.1.4.1.259.6.10.94.1.9.3 | Integer32 (2..10) | RW | |
scalar · Integer32 (2..10) · read-write · current The query count from a querier, during which a response is expected from an endstation. If a querier has sent a number of counts defined by igmpSnoopQueryCount, but an endstation has not responded, a countdown timer is started using the time defined by igmpSnoopQueryMaxResponseTime. If the countdown finishes, and the endstation still has not responded, then that endstation is deemed to have left the multicast group. | ||||
| SigmpSnoopQueryInterval | 1.3.6.1.4.1.259.6.10.94.1.9.4 | Integer32 (60..125) | RW | |
scalar · Integer32 (60..125) · read-write · current The interval (in seconds) between IGMP host-query messages sent by the switch. | ||||
| SigmpSnoopQueryMaxResponseTime | 1.3.6.1.4.1.259.6.10.94.1.9.5 | Integer32 (5..25) | RW | |
scalar · Integer32 (5..25) · read-write · current The time after a query, during which a response is expected from an endstation. If a querier has sent a number of queries defined by igmpSnoopQueryCount, but an endstation has not responded, a countdown timer is started using an initial value set by igmpSnoopQueryMaxResponseTime. If the countdown finishes, and the endstation still has not responded, then that the endstation is deemed to have left the multicast group. | ||||
| SigmpSnoopRouterPortExpireTime | 1.3.6.1.4.1.259.6.10.94.1.9.6 | Integer32 (300..500) | RW | |
scalar · Integer32 (300..500) · read-write · current Sets the time (in seconds) the switch waits after the previous querier has stopped querying before the router port (which received query packets from previous querier) expires. | ||||
| SigmpSnoopVersion | 1.3.6.1.4.1.259.6.10.94.1.9.7 | Integer32 (1..3) | RW | |
scalar · Integer32 (1..3) · read-write · current IGMP version snooped | ||||
| TigmpSnoopRouterCurrentTable | 1.3.6.1.4.1.259.6.10.94.1.9.8 | NA | ||
table · not-accessible · current Table for current router ports. | ||||
| RigmpSnoopRouterCurrentEntry | 1.3.6.1.4.1.259.6.10.94.1.9.8.1 | NA | ||
| CigmpSnoopRouterCurrentVlanIndex | 1.3.6.1.4.1.259.6.10.94.1.9.8.1.1 | Unsigned32 | NA | |
column · Unsigned32 · not-accessible · current The interface identified by a particular value of this index is the same interface as identified by the same value of dot1qVlanIndex in the Q-BRIDGE-MIB. The entry will only appear here after a configure to igmpSnoopRouterStaticTable. | ||||
| CigmpSnoopRouterCurrentPorts | 1.3.6.1.4.1.259.6.10.94.1.9.8.1.2 | PortList | RO | |
column · PortList · read-only · current The set of ports which are current router ports, including static router ports. Please refer to igmpSnoopRouterStaticTable. | ||||
| CigmpSnoopRouterCurrentStatus | 1.3.6.1.4.1.259.6.10.94.1.9.8.1.3 | PortList | RO | |
column · PortList · read-only · current The set of ports which are static router ports. | ||||
| TigmpSnoopRouterStaticTable | 1.3.6.1.4.1.259.6.10.94.1.9.9 | NA | ||
table · not-accessible · current Table for static router ports. | ||||
| RigmpSnoopRouterStaticEntry | 1.3.6.1.4.1.259.6.10.94.1.9.9.1 | NA | ||
| CigmpSnoopRouterStaticVlanIndex | 1.3.6.1.4.1.259.6.10.94.1.9.9.1.1 | Unsigned32 | NA | |
column · Unsigned32 · not-accessible · current The interface identified by a particular value of this index is the same interface as identified by the same value of dot1qVlanIndex in the Q-BRIDGE-MIB. The entry will only appear here after a configure to igmpSnoopRouterStaticTable. | ||||
| CigmpSnoopRouterStaticPorts | 1.3.6.1.4.1.259.6.10.94.1.9.9.1.2 | PortList | RC | |
column · PortList · read-create · current The set of ports which are static router ports. | ||||
| CigmpSnoopRouterStaticStatus | 1.3.6.1.4.1.259.6.10.94.1.9.9.1.3 | ValidStatus | RC | |
column · ValidStatus · read-create · current Setting this to valid(1) creates an entry. Setting this to invalid(2) destroys an entry. | ||||
| TigmpSnoopMulticastCurrentTable | 1.3.6.1.4.1.259.6.10.94.1.9.10 | NA | ||
table · not-accessible · current Table for current multicast addresses. | ||||
| RigmpSnoopMulticastCurrentEntry | 1.3.6.1.4.1.259.6.10.94.1.9.10.1 | NA | ||
row · not-accessible · current Entry for current multicast addresses. | ||||
| CigmpSnoopMulticastCurrentVlanIndex | 1.3.6.1.4.1.259.6.10.94.1.9.10.1.1 | Unsigned32 | NA | |
column · Unsigned32 · not-accessible · current The interface identified by a particular value of this index is the same interface as identified by the same value of dot1qVlanIndex in the Q-BRIDGE-MIB. The entry will only appear here after a configure to igmpSnoopMulticastStaticTable. | ||||
| CigmpSnoopMulticastCurrentIpAddress | 1.3.6.1.4.1.259.6.10.94.1.9.10.1.2 | IpAddress | NA | |
column · IpAddress · not-accessible · current IP address of multicast group. | ||||
| CigmpSnoopMulticastCurrentPorts | 1.3.6.1.4.1.259.6.10.94.1.9.10.1.3 | PortList | RO | |
column · PortList · read-only · current The set of ports which are members of a multicast group, including static members. Please refer to igmpSnoopMulticastStaticTable. | ||||
| CigmpSnoopMulticastCurrentStatus | 1.3.6.1.4.1.259.6.10.94.1.9.10.1.4 | PortList | RO | |
column · PortList · read-only · current The set of ports which are static members. | ||||
| TigmpSnoopMulticastStaticTable | 1.3.6.1.4.1.259.6.10.94.1.9.11 | NA | ||
table · not-accessible · current Table for static multicast addresses. | ||||
| RigmpSnoopMulticastStaticEntry | 1.3.6.1.4.1.259.6.10.94.1.9.11.1 | NA | ||
row · not-accessible · current Entry for static multicast addresses. | ||||
| CigmpSnoopMulticastStaticVlanIndex | 1.3.6.1.4.1.259.6.10.94.1.9.11.1.1 | Unsigned32 | NA | |
column · Unsigned32 · not-accessible · current The interface identified by a particular value of this index is the same interface as identified by the same value of dot1qVlanIndex in the Q-BRIDGE-MIB. The entry will only appear here after a configure to igmpSnoopMulticastStaticTable. | ||||
| CigmpSnoopMulticastStaticIpAddress | 1.3.6.1.4.1.259.6.10.94.1.9.11.1.2 | IpAddress | NA | |
column · IpAddress · not-accessible · current IP address of multicast group. | ||||
| CigmpSnoopMulticastStaticPorts | 1.3.6.1.4.1.259.6.10.94.1.9.11.1.3 | PortList | RC | |
column · PortList · read-create · current The set of ports which are members. | ||||
| CigmpSnoopMulticastStaticStatus | 1.3.6.1.4.1.259.6.10.94.1.9.11.1.4 | ValidStatus | RC | |
column · ValidStatus · read-create · current Setting this to valid(1) creates an entry. Setting this to invalid(2) destroys an entry. | ||||
| TigmpSnoopCurrentVlanTable | 1.3.6.1.4.1.259.6.10.94.1.9.14 | NA | ||
table · not-accessible · current Table for enabling or disabling IGMP snooping per VLAN. | ||||
| RigmpSnoopCurrentVlanEntry | 1.3.6.1.4.1.259.6.10.94.1.9.14.1 | NA | ||
row · not-accessible · current Entry for enabling or disabling IGMP snooping. | ||||
| CigmpSnoopCurrentVlanIndex | 1.3.6.1.4.1.259.6.10.94.1.9.14.1.1 | Unsigned32 | NA | |
column · Unsigned32 · not-accessible · current Same is dot1qVlanIndex in the Q-BRIDGE-MIB. This table has only one entry - the entry for the VLAN of the management interface. | ||||
| CigmpSnoopCurrentVlanImmediateLeave | 1.3.6.1.4.1.259.6.10.94.1.9.14.1.3 | EnabledStatus | RW | |
column · EnabledStatus · read-write · current The parameter to enable or disable the Immediate-Leave feature on this VLAN. | ||||
| SigmpSnoopLeaveProxy | 1.3.6.1.4.1.259.6.10.94.1.9.15 | EnabledStatus | RW | |
scalar · EnabledStatus · read-write · current This enables or disables Leave Proxy for IGMP Snooping. | ||||
| SigmpSnoopFilterStatus | 1.3.6.1.4.1.259.6.10.94.1.9.17 | EnabledStatus | RW | |
scalar · EnabledStatus · read-write · current Parameter to enable or disable IGMP filtering on the device. | ||||
| TigmpSnoopProfileTable | 1.3.6.1.4.1.259.6.10.94.1.9.18 | NA | ||
table · not-accessible · current The table for configuring the IGMP snooping profile. | ||||
| RigmpSnoopProfileEntry | 1.3.6.1.4.1.259.6.10.94.1.9.18.1 | NA | ||
row · not-accessible · current The entry for configuring the IGMP snooping profile.
| ||||
| CigmpSnoopProfileId | 1.3.6.1.4.1.259.6.10.94.1.9.18.1.1 | Unsigned32 | NA | |
column · Unsigned32 · not-accessible · current The ID of the IGMP snooping profile. | ||||
| CigmpSnoopProfileAction | 1.3.6.1.4.1.259.6.10.94.1.9.18.1.2 | INTEGER | RW | |
column · INTEGER · read-write · current The access mode of the IGMP snooping profile.
| ||||
| CigmpSnoopProfileStatus | 1.3.6.1.4.1.259.6.10.94.1.9.18.1.3 | ValidStatus | RW | |
column · ValidStatus · read-write · current Setting this to valid(1) creates an entry. Setting this to invalid(2) destroys an entry. | ||||
| NigmpSnoopProfileCtl | 1.3.6.1.4.1.259.6.10.94.1.9.19 | |||
| SigmpSnoopProfileCtlId | 1.3.6.1.4.1.259.6.10.94.1.9.19.1 | Unsigned32 | RW | |
scalar · Unsigned32 · read-write · current The ID of the IGMP snooping profile. | ||||
| SigmpSnoopProfileCtlInetAddressType | 1.3.6.1.4.1.259.6.10.94.1.9.19.2 | InetAddressType | RW | |
scalar · InetAddressType · read-write · current The address type is associated with this agent. Only ipv4(1) type is supported. | ||||
| SigmpSnoopProfileCtlStartInetAddress | 1.3.6.1.4.1.259.6.10.94.1.9.19.3 | InetAddress | RW | |
scalar · InetAddress · read-write · current The specified addresses in the start of the controlled IP multicast addresses. | ||||
| SigmpSnoopProfileCtlEndInetAddress | 1.3.6.1.4.1.259.6.10.94.1.9.19.4 | InetAddress | RW | |
scalar · InetAddress · read-write · current The specified addresses in the end of the controlled IP multicast addresses. | ||||
| SigmpSnoopProfileCtlAction | 1.3.6.1.4.1.259.6.10.94.1.9.19.5 | INTEGER | RW | |
scalar · INTEGER · read-write · current Setting it to create(2) creates the range of the controlled IP multicast addresses. Setting it to destroy(3) destroys the range of the controlled IP multicast addresses. When the action is completed, this object becomes noAction(1).
| ||||
| TigmpSnoopProfileRangeTable | 1.3.6.1.4.1.259.6.10.94.1.9.20 | NA | ||
table · not-accessible · current The table for configuring the range of the IGMP snooping profile. | ||||
| RigmpSnoopProfileRangeEntry | 1.3.6.1.4.1.259.6.10.94.1.9.20.1 | NA | ||
row · not-accessible · current The entry for configuring the range of the IGMP snooping profile. | ||||
| CigmpSnoopProfileRangeProfileId | 1.3.6.1.4.1.259.6.10.94.1.9.20.1.1 | Unsigned32 | NA | |
column · Unsigned32 · not-accessible · current This is defined as igmpSnoopProfileId. | ||||
| CigmpSnoopProfileRangeInetAddressType | 1.3.6.1.4.1.259.6.10.94.1.9.20.1.2 | InetAddressType | NA | |
column · InetAddressType · not-accessible · current The address type is associated with this agent. Only ipv4(1) type is supported. | ||||
| CigmpSnoopProfileRangeStartInetAddress | 1.3.6.1.4.1.259.6.10.94.1.9.20.1.3 | InetAddress | NA | |
column · InetAddress · not-accessible · current The specified addresses in the start of the controlled IP multicast addresses. | ||||
| CigmpSnoopProfileRangeEndInetAddress | 1.3.6.1.4.1.259.6.10.94.1.9.20.1.4 | InetAddress | RO | |
column · InetAddress · read-only · current The specified addresses in the end of the controlled IP multicast addresses. | ||||
| CigmpSnoopProfileRangeAction | 1.3.6.1.4.1.259.6.10.94.1.9.20.1.5 | INTEGER | RO | |
column · INTEGER · read-only · current The access mode of the IGMP snooping profile.
| ||||
| TigmpSnoopFilterPortTable | 1.3.6.1.4.1.259.6.10.94.1.9.21 | NA | ||
table · not-accessible · current Table for port configuration in IGMP filtering. | ||||
| RigmpSnoopFilterPortEntry | 1.3.6.1.4.1.259.6.10.94.1.9.21.1 | NA | ||
row · not-accessible · current Entry for port configuration in IGMP filtering. | ||||
| CigmpSnoopFilterPortIndex | 1.3.6.1.4.1.259.6.10.94.1.9.21.1.1 | Unsigned32 | NA | |
column · Unsigned32 · not-accessible · current The port and trunk (including trunk members) interface of the portTable. The interface identified by a particular value of this index is the same interface identified by the same value of ifIndex in the IF-MIB. | ||||
| CigmpSnoopFilterPortProfileId | 1.3.6.1.4.1.259.6.10.94.1.9.21.1.2 | Integer32 | RW | |
column · Integer32 · read-write · current The igmpSnoopProfileEntry identified by a particular value of this index is the same interface identified by the same value of the igmpSnoopProfileId object. If there is no corresponding entry in the igmpSnoopProfileTable, then no association exists. In particular, if this value is zero, no associated profile will be generated, as zero is not a valid profile index. | ||||
| TigmpSnoopThrottlePortTable | 1.3.6.1.4.1.259.6.10.94.1.9.22 | NA | ||
table · not-accessible · current Table for port configuration in IGMP throttling. | ||||
| RigmpSnoopThrottlePortEntry | 1.3.6.1.4.1.259.6.10.94.1.9.22.1 | NA | ||
row · not-accessible · current Entry for port configuration in IGMP throttling. | ||||
| CigmpSnoopThrottlePortIndex | 1.3.6.1.4.1.259.6.10.94.1.9.22.1.1 | Unsigned32 | NA | |
column · Unsigned32 · not-accessible · current The port and trunk (including trunk members) interface of the portTable. The interface identified by a particular value of this index is the same interface identified by the same value of ifIndex in the IF-MIB. | ||||
| CigmpSnoopThrottlePortRunningStatus | 1.3.6.1.4.1.259.6.10.94.1.9.22.1.2 | TruthValue | RO | |
column · TruthValue · read-only · current Describes the running status of the IGMP throttling to the switch. A value of true(1) indicates the IGMP throttling mechanism is active. A value of false(2) indicates the IGMP throttling mechanism is inactive. | ||||
| CigmpSnoopThrottlePortAction | 1.3.6.1.4.1.259.6.10.94.1.9.22.1.3 | INTEGER | RW | |
column · INTEGER · read-write · current The action mode of the IGMP throttling. A value of replace(1) means to replace a joined multicast group randomly when an interface receives an IGMP report and the number of current joined multicast groups is equal to the maximum number of IGMP groups that the interface can join. A value of deny(2) means to deny the IGMP report request when an interface receives an IGMP report and the number of current joined multicast groups is equal to the maximum number of IGMP groups that the interface can join.
| ||||
| CigmpSnoopThrottlePortMaxGroups | 1.3.6.1.4.1.259.6.10.94.1.9.22.1.4 | Integer32 (0..256) | RW | |
column · Integer32 (0..256) · read-write · current The maximum number of IGMP groups that the interface can join. | ||||
| CigmpSnoopThrottlePortCurrentGroups | 1.3.6.1.4.1.259.6.10.94.1.9.22.1.5 | Integer32 | RO | |
column · Integer32 · read-only · current The current number of IGMP groups that the interface has joined. | ||||
| TigmpSnoopPortTable | 1.3.6.1.4.1.259.6.10.94.1.9.27 | NA | ||
table · not-accessible · current Table of IGMP Snooping service per port. | ||||
| RigmpSnoopPortEntry | 1.3.6.1.4.1.259.6.10.94.1.9.27.1 | NA | ||
| CigmpSnoopPortIndex | 1.3.6.1.4.1.259.6.10.94.1.9.27.1.1 | Unsigned32 | NA | |
column · Unsigned32 · not-accessible · current The port and the trunk (excluding trunk members) interface of the igmpSnoopPortTable. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex in the IF-MIB. | ||||
| CigmpSnoopQueryDrop | 1.3.6.1.4.1.259.6.10.94.1.9.27.1.3 | INTEGER | RW | |
column · INTEGER · read-write · current Parameter to enable or disable dropping IGMP Query packet.
| ||||
| SigmpSnoopForwardingPriority | 1.3.6.1.4.1.259.6.10.94.1.9.29 | Integer32 (0..6 | 65535) | RW | |
scalar · Integer32 (0..6 | 65535) · read-write · current Configure IGMP snooping multicast stream forwarding priority. If value is 65535, it means the priority is disabled | ||||
| TigmpSnoopPortVlanTable | 1.3.6.1.4.1.259.6.10.94.1.9.32 | NA | ||
table · not-accessible · current Table of IGMP Snooping service per port per VLAN. | ||||
| RigmpSnoopPortVlanEntry | 1.3.6.1.4.1.259.6.10.94.1.9.32.1 | NA | ||
row · not-accessible · current Entry of IGMP Snooping service per port. | ||||
| CigmpSnoopPortVlanPortIndex | 1.3.6.1.4.1.259.6.10.94.1.9.32.1.1 | Unsigned32 | NA | |
column · Unsigned32 · not-accessible · current The port and the trunk (excluding trunk members) interface of the igmpSnoopPortTable. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex in the IF-MIB. | ||||
| CigmpSnoopPortVlanVlanIndex | 1.3.6.1.4.1.259.6.10.94.1.9.32.1.2 | Unsigned32 | NA | |
column · Unsigned32 · not-accessible · current The interface identified by a particular value of this index is the same interface as identified by the same value of dot1qVlanIndex in the Q-BRIDGE-MIB. | ||||
| CigmpSnoopPortVlanQueryDrop | 1.3.6.1.4.1.259.6.10.94.1.9.32.1.3 | INTEGER | RW | |
column · INTEGER · read-write · current Parameter to enable or disable dropping IGMP Query packet.
| ||||
| NipMgt | 1.3.6.1.4.1.259.6.10.94.1.10 | |||
| TnetConfigTable | 1.3.6.1.4.1.259.6.10.94.1.10.1 | NA | ||
table · not-accessible · current A table of netConfigEntry. | ||||
| RnetConfigEntry | 1.3.6.1.4.1.259.6.10.94.1.10.1.1 | NA | ||
row · not-accessible · current A set of configuration parameters for a particular network interface on this device. If the device has no network interface, this table is empty. The index is composed of the ifIndex assigned to the corresponding interface. | ||||
| CnetConfigIfIndex | 1.3.6.1.4.1.259.6.10.94.1.10.1.1.1 | Integer32 | NA | |
column · Integer32 · not-accessible · current The VLAN interface being used by this table entry. Only the VLAN interfaces which have an IP configured will appear in the table. | ||||
| CnetConfigIPAddress | 1.3.6.1.4.1.259.6.10.94.1.10.1.1.2 | IpAddress | NA | |
column · IpAddress · not-accessible · current The IP address of this Net interface. The default value for this object is 0.0.0.0. If either the netConfigIPAddress or netConfigSubnetMask is 0.0.0.0, then when the device boots, it may use BOOTP to try to figure out what these values should be. If BOOTP fails, before the device can talk on the network, this value must be configured (e.g., through a terminal attached to the device). | ||||
| CnetConfigSubnetMask | 1.3.6.1.4.1.259.6.10.94.1.10.1.1.3 | IpAddress | NA | |
column · IpAddress · not-accessible · current The subnet mask of this Net interface. The default value for this object is 0.0.0.0. If either the netConfigIPAddress or netConfigSubnetMask are 0.0.0.0, then when the device boots, it may use BOOTP to try to figure out what these values should be. If BOOTP fails, before the device can talk on the network, this value must be configured (e.g., through a terminal attached to the device). | ||||
| CnetConfigPrimaryInterface | 1.3.6.1.4.1.259.6.10.94.1.10.1.1.4 | INTEGER | RC | |
column · INTEGER · read-create · current Whether this is a primary interface.
| ||||
| CnetConfigUnnumbered | 1.3.6.1.4.1.259.6.10.94.1.10.1.1.5 | INTEGER | RO | |
column · INTEGER · read-only · current Whether this is an unnumbered interface.
| ||||
| CnetConfigStatus | 1.3.6.1.4.1.259.6.10.94.1.10.1.1.6 | RowStatus | RC | |
column · RowStatus · read-create · current The status of this conceptual row entry. This object isused to manage the
creation and deletion of conceptual rows.
The status column has six defined values:
- 'active', which indicates that the conceptual row is
available for use by the managed device;
- 'notInService', which indicates that the conceptual
row exists in the agent, but is unavailable for use by
the managed device (see NOTE below);
- 'notReady', which indicates that the conceptual row
exists in the agent, but is missing information
necessary in order to be available for use by the
managed device;
- 'createAndGo', which is supplied by a management
station wishing to create a new instance of a
conceptual row and to have its status automatically set
to active, making it available for use by the managed
device;
- 'createAndWait', which is supplied by a management
station wishing to create a new instance of a
conceptual row (but not make it available for use by
the managed device); and,
- 'destroy', which is supplied by a management station
wishing to delete all of the instances associated with
an existing conceptual row.
Whereas five of the six values (all except 'notReady') may
be specified in a management protocol set operation, only
three values will be returned in response to a management
protocol retrieval operation: 'notReady', 'notInService' or
'active'. That is, when queried, an existing conceptual row
has only three states: it is either available for use by
the managed device (the status column has value 'active');
it is not available for use by the managed device, though
the agent has sufficient information to make it so (the
status column has value 'notInService'); or, it is not
available for use by the managed device, and an attempt to
make it so would fail because the agent has insufficient
information (the state column has value 'notReady').
For a detailed description of this object, please refer to
SNMPv2-TC MIB. | ||||
| SnetDefaultGateway | 1.3.6.1.4.1.259.6.10.94.1.10.2 | IpAddress | RW | |
scalar · IpAddress · read-write · current The IP Address of the default gateway. If this value is undefined or unknown, it shall have the value 0.0.0.0. | ||||
| SipHttpState | 1.3.6.1.4.1.259.6.10.94.1.10.3 | EnabledStatus | RW | |
scalar · EnabledStatus · read-write · current Whether HTTP is enabled. | ||||
| SipHttpPort | 1.3.6.1.4.1.259.6.10.94.1.10.4 | Integer32 (1..65535) | RW | |
scalar · Integer32 (1..65535) · read-write · current The port number for HTTP. | ||||
| SipDhcpRestart | 1.3.6.1.4.1.259.6.10.94.1.10.5 | INTEGER | RW | |
scalar · INTEGER · read-write · current When set to restart(1) the DHCP server will restart. When read, this value always returns noRestart(2).
| ||||
| SipHttpsState | 1.3.6.1.4.1.259.6.10.94.1.10.6 | EnabledStatus | RW | |
scalar · EnabledStatus · read-write · current Whether HTTPS is enabled. | ||||
| SipHttpsPort | 1.3.6.1.4.1.259.6.10.94.1.10.7 | Integer32 (1..65535) | RW | |
scalar · Integer32 (1..65535) · read-write · current The port number for HTTPS. | ||||
| NdhcpMgt | 1.3.6.1.4.1.259.6.10.94.1.10.11 | |||
| NdhcpClient | 1.3.6.1.4.1.259.6.10.94.1.10.11.1 | |||
| NdhcpcOptions | 1.3.6.1.4.1.259.6.10.94.1.10.11.1.1 | |||
| TdhcpcInterfaceTable | 1.3.6.1.4.1.259.6.10.94.1.10.11.1.1.1 | NA | ||
table · not-accessible · current Table for DHCP client information listed by interface. Depending on the nature of the product, this table may have only one entry(e.g. for the management VLAN), or may have many entries(e.g. for all ports, or for all static VLANs). | ||||
| RdhcpcInterfaceEntry | 1.3.6.1.4.1.259.6.10.94.1.10.11.1.1.1.1 | NA | ||
row · not-accessible · current Entry for DHCP client information listed by interface.
| ||||
| CdhcpcIfIndex | 1.3.6.1.4.1.259.6.10.94.1.10.11.1.1.1.1.1 | Integer32 | NA | |
column · Integer32 · not-accessible · current This is defined by ifIndex in the IF-MIB.(static vlan if index) | ||||
| CdhcpcIfClientIdMode | 1.3.6.1.4.1.259.6.10.94.1.10.11.1.1.1.1.2 | INTEGER | RW | |
column · INTEGER · read-write · current Whether the Client ID is in text mode or in Hex mode.
| ||||
| CdhcpcIfClientId | 1.3.6.1.4.1.259.6.10.94.1.10.11.1.1.1.1.3 | OCTET STRING (SIZE (0..32)) | RW | |
column · OCTET STRING (SIZE (0..32)) · read-write · current The value that the DHCP client sets in the client_id option of DHCPDISCOVER and DHCPREQUEST messages. This value may be used by DHCP servers to uniquely identify the client. | ||||
| NdhcpOption82 | 1.3.6.1.4.1.259.6.10.94.1.10.11.4 | |||
| SdhcpOption82Status | 1.3.6.1.4.1.259.6.10.94.1.10.11.4.1 | INTEGER | RW | |
scalar · INTEGER · read-write · current Set enabled(1) to enable DHCP Relay Option 82, set disabled(2) to disable it.
| ||||
| SdhcpOption82Policy | 1.3.6.1.4.1.259.6.10.94.1.10.11.4.2 | INTEGER | RW | |
scalar · INTEGER · read-write · current Provide three policies to handle packet
| ||||
| SdhcpOption82RemoteIDMode | 1.3.6.1.4.1.259.6.10.94.1.10.11.4.3 | INTEGER | RW | |
scalar · INTEGER · read-write · current Provide five mode for insertion remote-id sub-option of option 82. If configured-string(5) has been set, dhcpOption82RemoteIDString will take effect.
| ||||
| SdhcpOption82RemoteIDString | 1.3.6.1.4.1.259.6.10.94.1.10.11.4.4 | OCTET STRING (SIZE (0..32)) | RW | |
scalar · OCTET STRING (SIZE (0..32)) · read-write · current Set string to remote-id sub-option of option 82. It only take effect when dhcpOption82RemoteIDMode is set to configured-string(5) | ||||
| SdhcpOption82EncodeFormat | 1.3.6.1.4.1.259.6.10.94.1.10.11.4.5 | INTEGER | RW | |
scalar · INTEGER · read-write · current Set encode format for CID and RID in option82. Set extra-subtype-included(1) will have extra subtype and length field in CID and RID. Set no-extra-subtype-included(2) will only have TLV format for CID and RID.
| ||||
| TdhcpOption82RelayServerAddrTable | 1.3.6.1.4.1.259.6.10.94.1.10.11.4.6 | NA | ||
table · not-accessible · current This table is to specify relay server IP address, the maximum number of server IP addresses user can specify is 5. | ||||
| RdhcpOption82RelayServerAddrEntry | 1.3.6.1.4.1.259.6.10.94.1.10.11.4.6.1 | NA | ||
row · not-accessible · current A conceptual row of dhcpOption82RelayServerAddrTable. | ||||
| CdhcpOption82RelayServerAddrIndex | 1.3.6.1.4.1.259.6.10.94.1.10.11.4.6.1.1 | Integer32 (1..5) | NA | |
column · Integer32 (1..5) · not-accessible · current The index of the relay server IP address. | ||||
| CdhcpOption82RelayServerAddrServerIp | 1.3.6.1.4.1.259.6.10.94.1.10.11.4.6.1.2 | IpAddress | RW | |
column · IpAddress · read-write · current The IP address of the relay server. | ||||
| SarpCacheDeleteAll | 1.3.6.1.4.1.259.6.10.94.1.10.17 | INTEGER | RW | |
scalar · INTEGER · read-write · current To delete all dynamic entries in the ARP cache, write this variable to delete(1). Writing this variable to noDelete(2) has no effect on the device. When read, this variable always returns noDelete(2). This object is only for Layer 2 switch.
| ||||
| NvlanMgt | 1.3.6.1.4.1.259.6.10.94.1.12 | |||
| TvlanTable | 1.3.6.1.4.1.259.6.10.94.1.12.1 | NA | ||
table · not-accessible · current Table for VLAN configuration. | ||||
| RvlanEntry | 1.3.6.1.4.1.259.6.10.94.1.12.1.1 | NA | ||
| CvlanIndex | 1.3.6.1.4.1.259.6.10.94.1.12.1.1.1 | Unsigned32 | NA | |
column · Unsigned32 · not-accessible · current Based on dot1qVlanIndex in the Q-BRIDGE-MIB. This table has only one entry - the entry for the VLAN of the management interface. | ||||
| CvlanAddressMethod | 1.3.6.1.4.1.259.6.10.94.1.12.1.1.2 | INTEGER | RW | |
column · INTEGER · read-write · current Method to get the IP address.
| ||||
| TvlanPortTable | 1.3.6.1.4.1.259.6.10.94.1.12.2 | NA | ||
table · not-accessible · current Table for port configuration in VLAN. | ||||
| RvlanPortEntry | 1.3.6.1.4.1.259.6.10.94.1.12.2.1 | NA | ||
| CvlanPortIndex | 1.3.6.1.4.1.259.6.10.94.1.12.2.1.1 | Integer32 | NA | |
column · Integer32 · not-accessible · current The port and the trunk (excluding trunk members) interface of the portTable. The interface identified by a particular value of this index is the same interface as identified by the same value of dot1qPvid in the Q-BRIDGE-MIB. | ||||
| CvlanPortMode | 1.3.6.1.4.1.259.6.10.94.1.12.2.1.2 | INTEGER | RW | |
column · INTEGER · read-write · current This variable sets the 802.1Q VLAN mode. Setting it to hybrid(1) sets a hybrid link. Setting it to dot1qTrunk(2) sets a trunk link. Setting it to access(3) sets an access link.
| ||||
| CvlanPortPrivateVlanType | 1.3.6.1.4.1.259.6.10.94.1.12.2.1.3 | INTEGER | RW | |
column · INTEGER · read-write · current The port type defined for private VLAN.
| ||||
| TprotocolVlanTable | 1.3.6.1.4.1.259.6.10.94.1.12.5 | NA | ||
table · not-accessible · current The configuration table which contains the binding entry of the protocol-group and VLANs. | ||||
| RprotocolVlanEntry | 1.3.6.1.4.1.259.6.10.94.1.12.5.1 | NA | ||
row · not-accessible · current The binding entry of the protocol-group and VLANs.
| ||||
| CprotocolVlanGroupId | 1.3.6.1.4.1.259.6.10.94.1.12.5.1.1 | Integer32 | NA | |
column · Integer32 · not-accessible · current The specified protocol group of a binding entry. | ||||
| CprotocolVlanGroupVid | 1.3.6.1.4.1.259.6.10.94.1.12.5.1.2 | Integer32 | RW | |
column · Integer32 · read-write · current The vlan index of the binding entry. The vid zero is used to delete the binding entry. | ||||
| NvoiceVlanMgt | 1.3.6.1.4.1.259.6.10.94.1.12.6 | |||
| TvoiceVlanOuiTable | 1.3.6.1.4.1.259.6.10.94.1.12.6.1 | NA | ||
table · not-accessible · current A table containing the mac address which can be identified by voice vlan. | ||||
| RvoiceVlanOuiEntry | 1.3.6.1.4.1.259.6.10.94.1.12.6.1.1 | NA | ||
row · not-accessible · current A table containing the mac address which can be identified by voice vlan.
| ||||
| CvoiceVlanOuiAddress | 1.3.6.1.4.1.259.6.10.94.1.12.6.1.1.1 | MacAddress | RO | |
column · MacAddress · read-only · current MAC address can be identified by voice vlan. | ||||
| CvoiceVlanOuiMask | 1.3.6.1.4.1.259.6.10.94.1.12.6.1.1.2 | MacAddress | RW | |
column · MacAddress · read-write · current The mask of MAC address. | ||||
| CvoiceVlanOuiDescription | 1.3.6.1.4.1.259.6.10.94.1.12.6.1.1.3 | DisplayString (SIZE (0..30)) | RW | |
column · DisplayString (SIZE (0..30)) · read-write · current The description of oui. | ||||
| CvoiceVlanOuiStatus | 1.3.6.1.4.1.259.6.10.94.1.12.6.1.1.4 | ValidStatus | RC | |
column · ValidStatus · read-create · current Current operation status of the row. | ||||
| SvoiceVlanEnabledId | 1.3.6.1.4.1.259.6.10.94.1.12.6.2 | INTEGER | RW | |
scalar · INTEGER · read-write · current Voice vlan enable status: enabled (2..4095), disabled (-1). | ||||
| SvoiceVlanAgingTime | 1.3.6.1.4.1.259.6.10.94.1.12.6.3 | INTEGER (5..43200) | RW | |
scalar · INTEGER (5..43200) · read-write · current Voice vlan aging time, the unit of which is minute. | ||||
| TvoiceVlanPortTable | 1.3.6.1.4.1.259.6.10.94.1.12.6.7 | NA | ||
table · not-accessible · current A list of voice vlan mode entries. | ||||
| RvoiceVlanPortEntry | 1.3.6.1.4.1.259.6.10.94.1.12.6.7.1 | NA | ||
row · not-accessible · current An entry containing voice vlan mode information, which is applicable to a voice vlan enabled interface.
| ||||
| CvoiceVlanPortIfIndex | 1.3.6.1.4.1.259.6.10.94.1.12.6.7.1.1 | Integer32 (1..2147483647) | NA | |
column · Integer32 (1..2147483647) · not-accessible · current The index of interface on which voice vlan function is enabled. | ||||
| CvoiceVlanPortMode | 1.3.6.1.4.1.259.6.10.94.1.12.6.7.1.2 | INTEGER | RW | |
column · INTEGER · read-write · current Voice vlan configuration mode status.
| ||||
| CvoiceVlanPortSecurity | 1.3.6.1.4.1.259.6.10.94.1.12.6.7.1.3 | EnabledStatus | RW | |
column · EnabledStatus · read-write · current If the security is enabled, the port is only allow voice traffuc for the voice vlan. | ||||
| CvoiceVlanPortPriority | 1.3.6.1.4.1.259.6.10.94.1.12.6.7.1.4 | INTEGER (0..6) | RW | |
column · INTEGER (0..6) · read-write · current The priority of the voice vlan traffic in the port. | ||||
| CvoiceVlanPortRuleOui | 1.3.6.1.4.1.259.6.10.94.1.12.6.7.1.5 | EnabledStatus | RW | |
column · EnabledStatus · read-write · current The address of voice device is learned from Oui table. | ||||
| CvoiceVlanPortRuleLldp | 1.3.6.1.4.1.259.6.10.94.1.12.6.7.1.6 | EnabledStatus | RW | |
column · EnabledStatus · read-write · current The address of voice device is learned from LLDP discovery. | ||||
| SvoiceVlanRemarkIpDscpStatus | 1.3.6.1.4.1.259.6.10.94.1.12.6.8 | EnabledStatus | RW | |
scalar · EnabledStatus · read-write · current Set enabled(1) to enable remarking of IP DSCP for voice traffic. Set disabled(2) to disable it. | ||||
| SvoiceVlanIpDscp | 1.3.6.1.4.1.259.6.10.94.1.12.6.9 | INTEGER | RW | |
scalar · INTEGER · read-write · current New IP DSCP value for voice traffic. | ||||
| NvlanDot1qTunnelGlobalConfig | 1.3.6.1.4.1.259.6.10.94.1.12.7 | |||
| SvlanDot1qTunnelStatus | 1.3.6.1.4.1.259.6.10.94.1.12.7.1 | EnabledStatus | RW | |
scalar · EnabledStatus · read-write · current This parameter is used to globally enable/disable 802.1Q Tunneling on the device. | ||||
| TvlanDot1qTunnelPortTable | 1.3.6.1.4.1.259.6.10.94.1.12.8 | NA | ||
table · not-accessible · current Table for port configuration in 802.1Q Tunneling. | ||||
| RvlanDot1qTunnelPortEntry | 1.3.6.1.4.1.259.6.10.94.1.12.8.1 | NA | ||
row · not-accessible · current Entry for port configuration in 802.1Q Tunneling. | ||||
| CvlanDot1qTunnelPortIndex | 1.3.6.1.4.1.259.6.10.94.1.12.8.1.1 | Integer32 | NA | |
column · Integer32 · not-accessible · current The port and the trunk (excluding trunk members) interface of the portTable. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex in the IF-MIB. | ||||
| CvlanDot1qTunnelPortMode | 1.3.6.1.4.1.259.6.10.94.1.12.8.1.2 | INTEGER | RW | |
column · INTEGER · read-write · current This variable sets the 802.1Q Tunneling mode. Setting it to none(1) indicates no mode in this port. Setting it to dot1qTunnel(2) sets as dot1q-tunnel mode port which link to customer. Setting it to dot1qTunnelUplink(3) sets as dot1q-tunnel mode port which link to service-provider. If vlanDot1qTunnelStatus is disabled, it means vlanDot1qTunnelPortMode is inactive.
| ||||
| CvlanDot1qTunnelPortEtherType | 1.3.6.1.4.1.259.6.10.94.1.12.8.1.3 | Unsigned32 (2048..65535) | RW | |
column · Unsigned32 (2048..65535) · read-write · current TPID for 802.1Q encapsulation. It's used to select a nonstandard (nondefault) 2-byte ethertype to identify 802.1Q tagged frames. | ||||
| TmacVlanTable | 1.3.6.1.4.1.259.6.10.94.1.12.11 | NA | ||
table · not-accessible · current A table that contains the settings for MAC-based VLAN. | ||||
| RmacVlanEntry | 1.3.6.1.4.1.259.6.10.94.1.12.11.1 | NA | ||
row · not-accessible · current A conceptual row in the macVlanTable. | ||||
| CmacVlanMacAddress | 1.3.6.1.4.1.259.6.10.94.1.12.11.1.1 | MacAddress | NA | |
column · MacAddress · not-accessible · current The MAC address that may specify an entry in the table which contains MAC-based VLAN information. | ||||
| CmacVlanId | 1.3.6.1.4.1.259.6.10.94.1.12.11.1.2 | Integer32 (1..4092) | RC | |
column · Integer32 (1..4092) · read-create · current Specifies the VLAN ID which the MAC address associates with. | ||||
| CmacVlanStatus | 1.3.6.1.4.1.259.6.10.94.1.12.11.1.4 | ValidStatus | RC | |
column · ValidStatus · read-create · current Set this to valid(1) to create an entry. Set this to invalid(2) to destroy an entry. | ||||
| CmacVlanMacMask | 1.3.6.1.4.1.259.6.10.94.1.12.11.1.5 | MacAddress | NA | |
column · MacAddress · not-accessible · current The MAC address mask that may specify an entry in the table which contains MAC-based VLAN information. | ||||
| SmacVlanClearAction | 1.3.6.1.4.1.259.6.10.94.1.12.12 | INTEGER | RW | |
scalar · INTEGER · read-write · current Action for clearing macVlanTable. When this object is set to clear(2), all entries in macVlanTable will be cleared. When this object is read, the value of this object is always noClear(1).
| ||||
| TsubnetVlanTable | 1.3.6.1.4.1.259.6.10.94.1.12.13 | NA | ||
table · not-accessible · current A table that contains the settings for IP subnet-based VLAN. | ||||
| RsubnetVlanEntry | 1.3.6.1.4.1.259.6.10.94.1.12.13.1 | NA | ||
row · not-accessible · current A conceptual row in the subnetVlanTable. | ||||
| CsubnetVlanIpAddress | 1.3.6.1.4.1.259.6.10.94.1.12.13.1.1 | IpAddress | NA | |
column · IpAddress · not-accessible · current The IPv4 address of a subnet. Any assignment (implicit or otherwise) of an instance of this object to a value x must be rejected if the bitwise logical-AND of x with the value of the corresponding instance of the subnetVlanMask object is not equal to x. | ||||
| CsubnetVlanMask | 1.3.6.1.4.1.259.6.10.94.1.12.13.1.2 | IpAddress | NA | |
column · IpAddress · not-accessible · current The netmask of a subnet. Any assignment (implicit or otherwise) of an instance of this object to a value x must be rejected if the bitwise logical-AND of x with the value of the corresponding instance of the subnetVlanIpAddress object is not equal to subnetVlanIpAddress. | ||||
| CsubnetVlanId | 1.3.6.1.4.1.259.6.10.94.1.12.13.1.3 | Integer32 (1..4094) | RC | |
column · Integer32 (1..4094) · read-create · current Specifies the VLAN ID which the subnet associates with. | ||||
| CsubnetVlanPriority | 1.3.6.1.4.1.259.6.10.94.1.12.13.1.4 | Integer32 (0..7) | RC | |
column · Integer32 (0..7) · read-create · current Specifies the priority whcich the subnet associates with. | ||||
| CsubnetVlanStatus | 1.3.6.1.4.1.259.6.10.94.1.12.13.1.5 | ValidStatus | RC | |
column · ValidStatus · read-create · current Set this to valid(1) to create an entry. Set this to invalid(2) to destroy an entry. | ||||
| SsubnetVlanClearAction | 1.3.6.1.4.1.259.6.10.94.1.12.14 | INTEGER | RW | |
scalar · INTEGER · read-write · current Action for clearing subnetVlanTable. When this object is set to clear(2), all entries in subnetVlanTable will be cleared. When this object is read, the value of this object is always noClear(1).
| ||||
| TvlanL2ProtocolTunnelPortTable | 1.3.6.1.4.1.259.6.10.94.1.12.16 | NA | ||
table · not-accessible · current Table for port configuration in Layer 2 Protocol Tunneling. | ||||
| RvlanL2ProtocolTunnelPortEntry | 1.3.6.1.4.1.259.6.10.94.1.12.16.1 | NA | ||
row · not-accessible · current Entry for port configuration in Layer 2 Protocol Tunneling.
| ||||
| CvlanL2ptPortIndex | 1.3.6.1.4.1.259.6.10.94.1.12.16.1.1 | Integer32 | NA | |
column · Integer32 · not-accessible · current The port and the trunk (excluding trunk members) interface of the portTable. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex in the IF-MIB. | ||||
| CvlanL2ptPortSta | 1.3.6.1.4.1.259.6.10.94.1.12.16.1.2 | EnabledStatus | RC | |
column · EnabledStatus · read-create · current Set enabled(1) to enable Layer 2 protocol tunneling for spanning-tree protocol. Set disabled(2) to disable Layer 2 protocol tunneling for spanning-tree protocol. | ||||
| CvlanL2ptPortLldp | 1.3.6.1.4.1.259.6.10.94.1.12.16.1.3 | EnabledStatus | RW | |
column · EnabledStatus · read-write · current Set enabled(1) to enable Layer 2 protocol tunneling for LLDP. Set disabled(2) to disable Layer 2 protocol tunneling for LLDP. | ||||
| CvlanL2ptPortCdp | 1.3.6.1.4.1.259.6.10.94.1.12.16.1.4 | EnabledStatus | RW | |
column · EnabledStatus · read-write · current Set enabled(1) to enable Layer 2 protocol tunneling for Cisco Discovery Protocol. Set disabled(2) to disable Layer 2 protocol tunneling for Cisco Discovery Protocol. | ||||
| CvlanL2ptPortVtp | 1.3.6.1.4.1.259.6.10.94.1.12.16.1.5 | EnabledStatus | RW | |
column · EnabledStatus · read-write · current Set enabled(1) to enable Layer 2 protocol tunneling for Cisco VTP. Set disabled(2) to disable Layer 2 protocol tunneling for Cisco VTP. | ||||
| CvlanL2ptPortPvst | 1.3.6.1.4.1.259.6.10.94.1.12.16.1.6 | EnabledStatus | RW | |
column · EnabledStatus · read-write · current Set enabled(1) to enable Layer 2 protocol tunneling for Cisco PVST+. Set disabled(2) to disable Layer 2 protocol tunneling for Cisco PVST+. | ||||
| NvlanL2ProtocolTunnelGlobalConfig | 1.3.6.1.4.1.259.6.10.94.1.12.19 | |||
| SvlanL2ProtocolTunnelAddress | 1.3.6.1.4.1.259.6.10.94.1.12.19.1 | MacAddress | RW | |
scalar · MacAddress · read-write · current Destination MAC address for PDU tunneling. | ||||
| NpriorityMgt | 1.3.6.1.4.1.259.6.10.94.1.13 | |||
| SprioIpPrecDscpStatus | 1.3.6.1.4.1.259.6.10.94.1.13.1 | INTEGER | RW | |
scalar · INTEGER · read-write · current Selects whether no frame priority mapping, IP ToS precedence mapping or DSCP mapping is performed.
| ||||
| TprioIpDscpTable | 1.3.6.1.4.1.259.6.10.94.1.13.4 | NA | ||
table · not-accessible · current Table for IP DSCP priority mapping. | ||||
| RprioIpDscpEntry | 1.3.6.1.4.1.259.6.10.94.1.13.4.1 | NA | ||
row · not-accessible · current Entry for IP DSCP priority mapping. | ||||
| CprioIpDscpPort | 1.3.6.1.4.1.259.6.10.94.1.13.4.1.1 | Integer32 | NA | |
column · Integer32 · not-accessible · current The port and the trunk (excluding trunk members) interface of the portTable. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex in the IF-MIB. | ||||
| CprioIpDscpValue | 1.3.6.1.4.1.259.6.10.94.1.13.4.1.2 | Integer32 (0..63) | NA | |
column · Integer32 (0..63) · not-accessible · current Value of IP DSCP as specified in the packet header. | ||||
| CprioIpDscpCos | 1.3.6.1.4.1.259.6.10.94.1.13.4.1.3 | Integer32 (0..7) | RW | |
column · Integer32 (0..7) · read-write · current Class of Service as defined by dot1dTrafficClassPriority in the P-BRIDGE-MIB. The prioIpDscpValue value in the same table row will be mapped to this Class of Service (CoS). This CoS is then further mapped to the hardware queue according to dot1dTrafficClassTable. | ||||
| SprioIpDscpRestoreDefault | 1.3.6.1.4.1.259.6.10.94.1.13.5 | Integer32 | RW | |
scalar · Integer32 · read-write · current Enables the IP DSCP settings of a port to be reset to their defaults. To reset the IP DSCP settings of a port, assign the value of the relevant ifIndex defined by the ifIndex in the IF-MIB. For example, assigning the value 1 will result in the IP DSCP settings of port 1 being restored to their default. 0 will always be obtained when reading this variable | ||||
| NprioCopy | 1.3.6.1.4.1.259.6.10.94.1.13.8 | |||
| SprioCopyIpDscp | 1.3.6.1.4.1.259.6.10.94.1.13.8.2 | OCTET STRING | RW | |
scalar · OCTET STRING · read-write · current Action to copy IP DSCP settings from a source port to many destination ports. The first four octets represent an integer for the source port in high-to-low (big-endian) order. Starting from the 5th octet is the destination port list in a form described by PortList in the Q-BRIDGE-MIB. Writing this object will perform copy. Reading this object will always get a zero-length octet string. | ||||
| TprioWrrTable | 1.3.6.1.4.1.259.6.10.94.1.13.9 | NA | ||
table · not-accessible · current Table for weighted round robin (WRR). | ||||
| RprioWrrEntry | 1.3.6.1.4.1.259.6.10.94.1.13.9.1 | NA | ||
| CprioWrrTrafficClass | 1.3.6.1.4.1.259.6.10.94.1.13.9.1.1 | Integer32 (0..7) | NA | |
column · Integer32 (0..7) · not-accessible · current Traffic class for this entry, as defined in dot1dTrafficClass in the P-BRIDGE-MIB. The actual maximum depends on the hardware, and is equal to dot1dPortNumTrafficClasses-1. | ||||
| CprioWrrWeight | 1.3.6.1.4.1.259.6.10.94.1.13.9.1.2 | Integer32 (1..255) | RW | |
column · Integer32 (1..255) · read-write · current Weight for this entry. | ||||
| SprioQueueMode | 1.3.6.1.4.1.259.6.10.94.1.13.10 | INTEGER | RW | |
scalar · INTEGER · read-write · current The global status for the prioQueue. wrr(1),strict(2)
| ||||
| NtrapDestMgt | 1.3.6.1.4.1.259.6.10.94.1.14 | |||
| TtrapDestTable | 1.3.6.1.4.1.259.6.10.94.1.14.1 | NA | ||
table · not-accessible · current A list of trap destination entries. | ||||
| RtrapDestEntry | 1.3.6.1.4.1.259.6.10.94.1.14.1.1 | NA | ||
row · not-accessible · current A destination entry describes the destination IP address, the community string, and SNMP version to use when sending a trap.
| ||||
| CtrapDestAddress | 1.3.6.1.4.1.259.6.10.94.1.14.1.1.1 | IpAddress | NA | |
column · IpAddress · not-accessible · current The address to send traps. | ||||
| CtrapDestCommunity | 1.3.6.1.4.1.259.6.10.94.1.14.1.1.2 | OCTET STRING (SIZE (0..32)) | RC | |
column · OCTET STRING (SIZE (0..32)) · read-create · current A community to which this destination address belongs. | ||||
| CtrapDestStatus | 1.3.6.1.4.1.259.6.10.94.1.14.1.1.3 | ValidStatus | RC | |
column · ValidStatus · read-create · current Setting this to valid(1) creates an entry. Setting this to invalid(2) destroys an entry. | ||||
| CtrapDestVersion | 1.3.6.1.4.1.259.6.10.94.1.14.1.1.4 | INTEGER | RC | |
column · INTEGER · read-create · current Determines the version of the trap that is to be sent to the trap receiver. If the value is 1, then an SNMP version 1 trap is sent and if the value is 2, an SNMP version 2 trap is sent.
| ||||
| CtrapDestUdpPort | 1.3.6.1.4.1.259.6.10.94.1.14.1.1.5 | Integer32 (1..65535) | RC | |
column · Integer32 (1..65535) · read-create · current Determines the UDP port number that the trap will be sent to. | ||||
| NtrapVar | 1.3.6.1.4.1.259.6.10.94.1.14.2 | |||
| StrapIpFilterRejectMode | 1.3.6.1.4.1.259.6.10.94.1.14.2.6 | INTEGER | AN | |
scalar · INTEGER · accessible-for-notify · current This variable is for trap var binding, indicated the ipfilter reject mode. web(1), snmp(2), telnet(3).
| ||||
| StrapIpFilterRejectIp | 1.3.6.1.4.1.259.6.10.94.1.14.2.7 | Integer32 | AN | |
scalar · Integer32 · accessible-for-notify · current This variable is for trap var binding, indicating the IP address that rejected by the ipfilter. | ||||
| StrapAutoUpgradeResult | 1.3.6.1.4.1.259.6.10.94.1.14.2.18 | INTEGER | AN | |
scalar · INTEGER · accessible-for-notify · current The parameter indicates which result triggers the trap.
| ||||
| StrapAutoUpgradeNewVer | 1.3.6.1.4.1.259.6.10.94.1.14.2.19 | DisplayString (SIZE (0..20)) | AN | |
scalar · DisplayString (SIZE (0..20)) · accessible-for-notify · current The parameter indicates new version which was upgraded to. When trapAutoUpgradeResult was failed(2), it would be null string. | ||||
| StrapDhcpClientPortIfIndex | 1.3.6.1.4.1.259.6.10.94.1.14.2.20 | INTEGER | AN | |
scalar · INTEGER · accessible-for-notify · current ifIndex for the port connected to DHCP rouge server. | ||||
| StrapDhcpServerIpAddress | 1.3.6.1.4.1.259.6.10.94.1.14.2.21 | DisplayString | AN | |
scalar · DisplayString · accessible-for-notify · current The IP address of the rouge server. | ||||
| StrapMacNotifyVid | 1.3.6.1.4.1.259.6.10.94.1.14.2.24 | Unsigned32 | AN | |
scalar · Unsigned32 · accessible-for-notify · current This variable is for trap var binding, indicated the VLAN id of MAC operation. | ||||
| StrapMacNotifyMac | 1.3.6.1.4.1.259.6.10.94.1.14.2.25 | MacAddress | AN | |
scalar · MacAddress · accessible-for-notify · current This variable is for trap var binding, indicated the MAC address of MAC operation. | ||||
| StrapMacNotifyAction | 1.3.6.1.4.1.259.6.10.94.1.14.2.26 | INTEGER | AN | |
scalar · INTEGER · accessible-for-notify · current This variable is for trap var binding, indicated the action of MAC operation. add(1), remove(2).
| ||||
| StrapPortSecurityIntrusionMac | 1.3.6.1.4.1.259.6.10.94.1.14.2.29 | MacAddress | AN | |
scalar · MacAddress · accessible-for-notify · current This variable indicates the intrusion MAC address. | ||||
| StrapIfIndex | 1.3.6.1.4.1.259.6.10.94.1.14.2.30 | Unsigned32 | AN | |
scalar · Unsigned32 · accessible-for-notify · current This variable is for trap var binding, indicating the index of an interface. | ||||
| StrapVlanId | 1.3.6.1.4.1.259.6.10.94.1.14.2.31 | Unsigned32 | AN | |
scalar · Unsigned32 · accessible-for-notify · current This variable is for trap var binding, indicating the identifier of a VLAN. | ||||
| NqosMgt | 1.3.6.1.4.1.259.6.10.94.1.16 | |||
| NrateLimitMgt | 1.3.6.1.4.1.259.6.10.94.1.16.1 | |||
| TrateLimitPortTable | 1.3.6.1.4.1.259.6.10.94.1.16.1.2 | NA | ||
table · not-accessible · current Table for rate limit of each port. | ||||
| RrateLimitPortEntry | 1.3.6.1.4.1.259.6.10.94.1.16.1.2.1 | NA | ||
| CrlPortIndex | 1.3.6.1.4.1.259.6.10.94.1.16.1.2.1.1 | Integer32 | NA | |
column · Integer32 · not-accessible · current The port and the trunk (including trunk member) interface of the portTable. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex in the IF-MIB. | ||||
| CrlPortInputStatus | 1.3.6.1.4.1.259.6.10.94.1.16.1.2.1.6 | EnabledStatus | RW | |
column · EnabledStatus · read-write · current Whether input rate limit is enabled for this port. | ||||
| CrlPortOutputStatus | 1.3.6.1.4.1.259.6.10.94.1.16.1.2.1.7 | EnabledStatus | RW | |
column · EnabledStatus · read-write · current Whether output rate limit is enabled for this port. | ||||
| CrlPortInputLimitInKilo | 1.3.6.1.4.1.259.6.10.94.1.16.1.2.1.10 | Integer32 | RW | |
column · Integer32 · read-write · current Value of the input rate limit. Its unit is kilobits per second. For a 100 Mbps port, the range is 64 to 100000. For a 1000 Mbps port, the range is 64 to 1000000. | ||||
| CrlPortOutputLimitInKilo | 1.3.6.1.4.1.259.6.10.94.1.16.1.2.1.11 | Integer32 | RW | |
column · Integer32 · read-write · current Value of the output rate limit. Its unit is kilobits per second. For a 100 Mbps port, the range is 64 to 100000. For a 1000 Mbps port, the range is 64 to 1000000. | ||||
| NdiffServMgt | 1.3.6.1.4.1.259.6.10.94.1.16.4 | |||
| TdiffServPortTable | 1.3.6.1.4.1.259.6.10.94.1.16.4.9 | NA | ||
table · not-accessible · current Table for differentiated services on each port. | ||||
| RdiffServPortEntry | 1.3.6.1.4.1.259.6.10.94.1.16.4.9.1 | NA | ||
row · not-accessible · current Entry for differentiated services on each port.
| ||||
| CdiffServPortIfIndex | 1.3.6.1.4.1.259.6.10.94.1.16.4.9.1.1 | Integer32 | NA | |
column · Integer32 · not-accessible · current This object is the interface index of diffServPortEntry. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex in the IF-MIB. | ||||
| CdiffServPortPolicyMapIndex | 1.3.6.1.4.1.259.6.10.94.1.16.4.9.1.2 | Integer32 | RW | |
column · Integer32 · read-write · current Specifies the policy map binding to the interface. The policy map identified by a particular value of this index is associated with the same DiffServPolicyMapEntry as identified by the same value of diffServPolicyMapIndex. | ||||
| CdiffServPortIngressIpAclIndex | 1.3.6.1.4.1.259.6.10.94.1.16.4.9.1.3 | Integer32 | RW | |
column · Integer32 · read-write · current Specifies the ingress IP ACL binding to the interface. The ingress IP ACL identified by a particular value of this index is associated with the same diffServAclEntry as identified by the same value of diffServAclIndex. | ||||
| CdiffServPortIngressMacAclIndex | 1.3.6.1.4.1.259.6.10.94.1.16.4.9.1.4 | Integer32 | RW | |
column · Integer32 · read-write · current Specifies the ingress MAC ACL binding to the interface. The ingress MAC ACL identified by a particular value of this index is associated with the same diffServAclEntry as identified by the same value of diffServAclIndex. | ||||
| CdiffServPortIngressIpv6AclIndex | 1.3.6.1.4.1.259.6.10.94.1.16.4.9.1.5 | Integer32 | RW | |
column · Integer32 · read-write · current Specifies the ingress IPv6 ACL binding to the interface. The ingress IPv6 ACL identified by a particular value of this index is associated with the same diffServAclEntry as identified by the same value of diffServAclIndex. | ||||
| TdiffServPolicyMapTable | 1.3.6.1.4.1.259.6.10.94.1.16.4.10 | NA | ||
table · not-accessible · current Table for policy map. | ||||
| RdiffServPolicyMapEntry | 1.3.6.1.4.1.259.6.10.94.1.16.4.10.1 | NA | ||
| CdiffServPolicyMapIndex | 1.3.6.1.4.1.259.6.10.94.1.16.4.10.1.1 | Integer32 | NA | |
column · Integer32 · not-accessible · current An index that uniquely identifies an entry in this table. | ||||
| CdiffServPolicyMapName | 1.3.6.1.4.1.259.6.10.94.1.16.4.10.1.2 | DisplayString (SIZE (1..16)) | RC | |
column · DisplayString (SIZE (1..16)) · read-create · current The name of this entry. | ||||
| CdiffServPolicyMapDescription | 1.3.6.1.4.1.259.6.10.94.1.16.4.10.1.3 | DisplayString (SIZE (0..64)) | RC | |
column · DisplayString (SIZE (0..64)) · read-create · current The description of this entry. | ||||
| CdiffServPolicyMapElementIndexList | 1.3.6.1.4.1.259.6.10.94.1.16.4.10.1.4 | OCTET STRING (SIZE (0..32)) | RO | |
column · OCTET STRING (SIZE (0..32)) · read-only · current The octet string containes the diffServPolicyMapElementEntry indexes. Two octets express one index and it is represented in network order. This index list indicates the diffServPolicyMapEntrys which belong to this entry. | ||||
| CdiffServPolicyMapStatus | 1.3.6.1.4.1.259.6.10.94.1.16.4.10.1.5 | RowStatus | RC | |
column · RowStatus · read-create · current This object is used to create a new row, or modify or delete
an existing row, in this table. The status column has six
defined values:
The status column has six defined values:
- 'active', which indicates that the conceptual row is
available for use by the managed device;
- 'notInService', which indicates that the conceptual
row exists in the agent, but is unavailable for use by
the managed device (see NOTE below);
- 'notReady', which indicates that the conceptual row
exists in the agent, but is missing information
necessary in order to be available for use by the
managed device;
- 'createAndGo', which is supplied by a management
station wishing to create a new instance of a
conceptual row and to have its status automatically set
to active, making it available for use by the managed
device;
- 'createAndWait', which is supplied by a management
station wishing to create a new instance of a
conceptual row (but not make it available for use by
the managed device); and,
- 'destroy', which is supplied by a management station
wishing to delete all of the instances associated with
an existing conceptual row.
Whereas five of the six values (all except 'notReady') may
be specified in a management protocol set operation, only
three values will be returned in response to a management
protocol retrieval operation: 'notReady', 'notInService' or
'active'. That is, when queried, an existing conceptual row
has only three states: it is either available for use by
the managed device (the status column has the value
'active');it is not available for use by the managed device,
though the agent has sufficient information to make it so
(the status column has the value 'notInService'); or, it is
not available for use by the managed device, and an attempt
to make it so would fail because the agent has insufficient
information (the state column has the value 'notReady').
For a detailed description of this object, please refer to
SNMPv2-TC MIB. | ||||
| NdiffServPolicyMapAttachCtl | 1.3.6.1.4.1.259.6.10.94.1.16.4.11 | |||
| SdiffServPolicyMapAttachCtlIndex | 1.3.6.1.4.1.259.6.10.94.1.16.4.11.1 | Integer32 | RW | |
scalar · Integer32 · read-write · current Index for attachment control. Specifies the policy map as the target to relate with the policy map element. The policy map identified by a particular value of this index is associated with the same diffServPolicyMapEntry as identified by the same value of diffServPolicyMapIndex. | ||||
| SdiffServPolicyMapAttachCtlElementIndex | 1.3.6.1.4.1.259.6.10.94.1.16.4.11.2 | Integer32 | RW | |
scalar · Integer32 · read-write · current Element Index for attachment control.Specifies the policy map element to relate with the policy map. The policy map element identified by a particular value of this index is associated with the same diffServPolicyMapElementEntry as identified by the same value of diffServPolicyMapElementIndex. | ||||
| SdiffServPolicyMapAttachCtlAction | 1.3.6.1.4.1.259.6.10.94.1.16.4.11.3 | INTEGER | RW | |
scalar · INTEGER · read-write · current Action for attachment control. When setting this object to attach(2) to begin the attaching operation, a particular policy map element is attached to a particular policy map. When setting this object to detach(3) to begin the not attached operation, a particular policy map element is not attached to a particular policy map. When the action is finshed or no action is taken, the value of this object is noAction(1). A particular policy map is specified in the diffServPolicyMapAttachCtlIndex. A particularpolicy map element is specified in the diffServPolicyMapAttachCtlElementIndex.
| ||||
| TdiffServPolicyMapElementTable | 1.3.6.1.4.1.259.6.10.94.1.16.4.12 | NA | ||
table · not-accessible · current Table for policy map element. | ||||
| RdiffServPolicyMapElementEntry | 1.3.6.1.4.1.259.6.10.94.1.16.4.12.1 | NA | ||
| CdiffServPolicyMapElementIndex | 1.3.6.1.4.1.259.6.10.94.1.16.4.12.1.1 | Integer32 | NA | |
column · Integer32 · not-accessible · current An index that uniquely identifies an entry in this table. | ||||
| CdiffServPolicyMapElementClassMapIndex | 1.3.6.1.4.1.259.6.10.94.1.16.4.12.1.2 | Integer32 (1..65535) | RC | |
column · Integer32 (1..65535) · read-create · current Specifies the class map binding to this entry. The class map identified by a particular value of this index is associated with the same diffServClassMapEntry as identified by the same value of diffServClassMapIndex. | ||||
| CdiffServPolicyMapElementMeterIndex | 1.3.6.1.4.1.259.6.10.94.1.16.4.12.1.3 | Integer32 | RC | |
column · Integer32 · read-create · current Specifies the meter binding to this entry. The meter identified by a particular value of this index is associated with the same diffServMeterEntry as identified by the same value of diffServMeterIndex. If this value is zero, no associated meter will be associated, as zero is not a valid meter index. | ||||
| CdiffServPolicyMapElementActionIndex | 1.3.6.1.4.1.259.6.10.94.1.16.4.12.1.4 | Integer32 (1..65535) | RC | |
column · Integer32 (1..65535) · read-create · current Specifies the action binding to this entry. The action identified by a particular value of this index is associated with the same diffServActionEntry as identified by the same value of diffServActionIndex. | ||||
| CdiffServPolicyMapElementStatus | 1.3.6.1.4.1.259.6.10.94.1.16.4.12.1.5 | RowStatus | RC | |
column · RowStatus · read-create · current This object is used to create a new row, or modify or delete
an existing row, in this table. The status column has six
defined values:
The status column has six defined values:
- 'active', which indicates that the conceptual row is
available for use by the managed device;
- 'notInService', which indicates that the conceptual
row exists in the agent, but is unavailable for use by
the managed device (see NOTE below);
- 'notReady', which indicates that the conceptual row
exists in the agent, but is missing information
necessary in order to be available for use by the
managed device;
- 'createAndGo', which is supplied by a management
station wishing to create a new instance of a
conceptual row and to have its status automatically set
to active, making it available for use by the managed
device;
- 'createAndWait', which is supplied by a management
station wishing to create a new instance of a
conceptual row (but not make it available for use by
the managed device); and,
- 'destroy', which is supplied by a management station
wishing to delete all of the instances associated with
an existing conceptual row.
Whereas five of the six values (all except 'notReady') may
be specified in a management protocol set operation, only
three values will be returned in response to a management
protocol retrieval operation: 'notReady', 'notInService' or
'active'. That is, when queried, an existing conceptual row
has only three states: it is either available for use by
the managed device (the status column has the value
'active'); it is not available for use by the managed device,
though the agent has sufficient information to make it so
(the status column has the value 'notInService'); or, it is
not available for use by the managed device, and an attempt
to make it so would fail because the agent has insufficient
information (the state column has the value 'notReady').
For a detailed description of this object, please refer to
SNMPv2-TC MIB. | ||||
| TdiffServClassMapTable | 1.3.6.1.4.1.259.6.10.94.1.16.4.13 | NA | ||
table · not-accessible · current Table for class map. | ||||
| RdiffServClassMapEntry | 1.3.6.1.4.1.259.6.10.94.1.16.4.13.1 | NA | ||
| CdiffServClassMapIndex | 1.3.6.1.4.1.259.6.10.94.1.16.4.13.1.1 | Integer32 | NA | |
column · Integer32 · not-accessible · current An index that uniquely identifies an entry in this table. | ||||
| CdiffServClassMapName | 1.3.6.1.4.1.259.6.10.94.1.16.4.13.1.2 | DisplayString (SIZE (1..16)) | RC | |
column · DisplayString (SIZE (1..16)) · read-create · current The name of this entry. | ||||
| CdiffServClassMapDescription | 1.3.6.1.4.1.259.6.10.94.1.16.4.13.1.3 | DisplayString (SIZE (0..64)) | RC | |
column · DisplayString (SIZE (0..64)) · read-create · current The description of this entry. | ||||
| CdiffServClassMapMatchType | 1.3.6.1.4.1.259.6.10.94.1.16.4.13.1.4 | INTEGER | RC | |
column · INTEGER · read-create · current The map match type of this entry.
| ||||
| CdiffServClassMapElementIndexTypeList | 1.3.6.1.4.1.259.6.10.94.1.16.4.13.1.5 | OCTET STRING (SIZE (0..255)) | RO | |
column · OCTET STRING (SIZE (0..255)) · read-only · current The octet string containes the type of class map element indexes. Two octets which are represented in network order express one type of the class map element index in network order and it maps the index of differServClasssMapElementIndexList in order. When the type is macAce(1), the maping index of differServClasssMapElementIndexList is the diffServMacAceEntry. When the type is ipAce(2), the maping index of differServClasssMapElementIndexList is the diffServIpAceEntry. When the type is acl(3), the maping index of differServClasssMapElementIndexList is the diffServAclEntry. | ||||
| CdiffServClassMapElementIndexList | 1.3.6.1.4.1.259.6.10.94.1.16.4.13.1.6 | OCTET STRING (SIZE (0..255)) | RO | |
column · OCTET STRING (SIZE (0..255)) · read-only · current The octet string containes the class map element indexes. Two octets express one index and it is represented in network order. This index list indicates the particular class map elements which belong to this table. The class map element uses type to indicate diffServAclEntry, the diffServIpAceEntry or diffServMacAceEntry. The type is two octet specified in differServClasssMapElementIndexTypeList in order. When the type is macAce(1), the maping index of differServClasssMapElementIndexList is the diffServMacAceEntry. When the type is ipAce(2), the maping index of differServClasssMapElementIndexList is the diffServIpAceEntry. When the type is acl(3), the maping index of differServClasssMapElementIndexList is the diffServAclEntry. | ||||
| CdiffServClassMapStatus | 1.3.6.1.4.1.259.6.10.94.1.16.4.13.1.7 | RowStatus | RC | |
column · RowStatus · read-create · current This object is used to create a new row or modify or delete
an existing row in this table.The status column has six
defined values:
The status column has six defined values:
- 'active', which indicates that the conceptual row is
available for use by the managed device;
- 'notInService', which indicates that the conceptual
row exists in the agent, but is unavailable for use by
the managed device (see NOTE below);
- 'notReady', which indicates that the conceptual row
exists in the agent, but is missing information
necessary in order to be available for use by the
managed device;
- 'createAndGo', which is supplied by a management
station wishing to create a new instance of a
conceptual row and to have its status automatically set
to active, making it available for use by the managed
device;
- 'createAndWait', which is supplied by a management
station wishing to create a new instance of a
conceptual row (but not make it available for use by
the managed device); and,
- 'destroy', which is supplied by a management station
wishing to delete all of the instances associated with
an existing conceptual row.
Whereas five of the six values (all except 'notReady') may
be specified in a management protocol set operation, only
three values will be returned in response to a management
protocol retrieval operation: 'notReady', 'notInService' or
'active'. That is, when queried, an existing conceptual row
has only three states: it is either available for use by
the managed device (the status column has the value
'active'); it is not available for use by the managed device,
though the agent has sufficient information to make it so
(the status column has the value 'notInService'); or, it is
not available for use by the managed device, and an attempt
to make it so would fail because the agent has insufficient
information (the state column has the value 'notReady').
For a detailed description of this object, please refer to
SNMPv2-TC MIB. | ||||
| NdiffServClassMapAttachCtl | 1.3.6.1.4.1.259.6.10.94.1.16.4.14 | |||
| SdiffServClassMapAttachCtlIndex | 1.3.6.1.4.1.259.6.10.94.1.16.4.14.1 | Integer32 | RW | |
scalar · Integer32 · read-write · current Index for attachment control. Specifies the class map as the target to relate with class map elements. The class map identified by a particular value of this index is associated with the same diffServClassMapEntry as identified by the same value of diffServClassMapIndex. | ||||
| SdiffServClassMapAttachCtlElementIndexType | 1.3.6.1.4.1.259.6.10.94.1.16.4.14.2 | INTEGER | RW | |
scalar · INTEGER · read-write · current Element Index for attachment control. Specifies the type of class map element to relate with the class map. When type is macAce(1), the index of diffServClassMapAttachCtlElementIndex is the index of diffServMacAceEntry. When the type is ipAce(2), the index of diffServClassMapAttachCtlElementIndex is the index of diffServIpAceEntry. When the type is acl(3), the index of diffServClassMapAttachCtlElementIndex is the index of diffServAclEntry.
| ||||
| SdiffServClassMapAttachCtlElementIndex | 1.3.6.1.4.1.259.6.10.94.1.16.4.14.3 | Integer32 | RW | |
scalar · Integer32 · read-write · current Element Index for attachment control. Specifies the class map element related with the class map. The class map element uses type to indicate diffServAclEntry, the diffServIpAceEntry or diffServMacAceEntry. The type is specified in diffServClassMapAttachCtlElementIndexType. When the type is macAce(1), the maping index of differServClasssMapElementIndexList is the diffServMacAceEntry. When the type is ipAce(2), the maping index of differServClasssMapElementIndexList is the diffServIpAceEntry. When the type is acl(3), the maping index of differServClasssMapElementIndexList is the diffServAclEntry. | ||||
| SdiffServClassMapAttachCtlAction | 1.3.6.1.4.1.259.6.10.94.1.16.4.14.4 | INTEGER | RW | |
scalar · INTEGER · read-write · current Action for attachment control. When setting this object to attach(2) to begin the attaching operation, a particular class map element is attached to a particular class map. When setting this object to detach(3) to begin the not attached operation, then a particular class map element is not attached to a particular class map. When the action is finshed whether successfully or not, or no action is taken, the value of this object always is noAction(1). The value of a particular class map is specified in the AclAttachCtlTargetIndex. The class map element is specified by diffServClassMapAttachCtlElementIndexType and diffServClassMapAttachCtlElementIndex.
| ||||
| TdiffServAclTable | 1.3.6.1.4.1.259.6.10.94.1.16.4.15 | NA | ||
table · not-accessible · current Table for ACL. | ||||
| RdiffServAclEntry | 1.3.6.1.4.1.259.6.10.94.1.16.4.15.1 | NA | ||
| CdiffServAclIndex | 1.3.6.1.4.1.259.6.10.94.1.16.4.15.1.1 | Integer32 | NA | |
column · Integer32 · not-accessible · current An index that uniquely identifies an entry in the ACL table. | ||||
| CdiffServAclName | 1.3.6.1.4.1.259.6.10.94.1.16.4.15.1.2 | DisplayString (SIZE (1..16)) | RC | |
column · DisplayString (SIZE (1..16)) · read-create · current The name of this entry. | ||||
| CdiffServAclType | 1.3.6.1.4.1.259.6.10.94.1.16.4.15.1.3 | INTEGER | RC | |
column · INTEGER · read-create · current The type of this entry. When the value of ACL type is modified, then the ACEs in the diffServAclAceIndexList of this entry will be auto-removed, and this entry will be auto- unbound from the diffServPortTable and the diffServClassMapTable.
| ||||
| CdiffServAclAceIndexList | 1.3.6.1.4.1.259.6.10.94.1.16.4.15.1.4 | OCTET STRING (SIZE (0..255)) | RO | |
column · OCTET STRING (SIZE (0..255)) · read-only · current The octet string containes the ACE indexes. Two octets express one index and it is represented in network order. This index list indicates the particular ACEs which belong to this table. The ACE uses type to indicate the diffServMacAceEntry, the diffServIpAceEntry, the diffServIpv6AceEntry or the diffServArpAceEntry. The type is specified in diffServAclType. When the type is mac(1), the index of diffServAclAceIndexList is the diffServMacAceEntry. When the type is ipstandard(2) or ipextended(3), the index of diffServAclAceIndexList is the diffServIpAceEntry. When the type is ipv6standard(4) or ipv6extended(5), the index of diffServAclAceIndexList is the diffServIpv6AceEntry. When the type is arp(6), the index of diffServAclAceIndexList is the diffServArpAceEntry. | ||||
| CdiffServAclStatus | 1.3.6.1.4.1.259.6.10.94.1.16.4.15.1.5 | RowStatus | RC | |
column · RowStatus · read-create · current This object is used to create a new row or modify or delete
an existing row in this table. The status column has six
defined values:
- 'active', which indicates that the conceptual row is
available for use by the managed device;
- 'notInService', which indicates that the conceptual
row exists in the agent, but is unavailable for use by
the managed device (see NOTE below);
- 'notReady', which indicates that the conceptual row
exists in the agent, but is missing information
necessary in order to be available for use by the
managed device;
- 'createAndGo', which is supplied by a management
station wishing to create a new instance of a
conceptual row and to have its status automatically set
to active, making it available for use by the managed
device;
- 'createAndWait', which is supplied by a management
station wishing to create a new instance of a
conceptual row (but not make it available for use by
the managed device); and,
- 'destroy', which is supplied by a management station
wishing to delete all of the instances associated with
an existing conceptual row.
Whereas five of the six values (all except 'notReady') may
be specified in a management protocol set operation, only
three values will be returned in response to a management
protocol retrieval operation: 'notReady', 'notInService' or
'active'. That is, when queried, an existing conceptual row
has only three states: it is either available for use by
the managed device (the status column has the value
'active'); it is not available for use by the managed device,
though the agent has sufficient information to make it so
(the status column has the value 'notInService'); or, it is
not available for use by the managed device, and an attempt
to make it so would fail because the agent has insufficient
information (the state column has the value 'notReady').
For a detailed description of this object, please refer to
SNMPv2-TC MIB. | ||||
| NdiffServAclAttachCtl | 1.3.6.1.4.1.259.6.10.94.1.16.4.16 | |||
| SdiffServAclAttachCtlIndex | 1.3.6.1.4.1.259.6.10.94.1.16.4.16.1 | Integer32 | RW | |
scalar · Integer32 · read-write · current Index for attachment control. Specifies the ACL as the target to relate with the IP ACE, the MAC ACE or IPv6 ACE. The ACL identified by a particular value of this index is associated with the same diffServAclEntry as identified by the same value of diffServAclIndex. | ||||
| SdiffServAclAttachCtlAceType | 1.3.6.1.4.1.259.6.10.94.1.16.4.16.2 | INTEGER | RW | |
scalar · INTEGER · read-write · current Type for attachment control. Specifies the type of diffServAclAttachCtlAceIndex to relate with the diffServAclAttachCtlIndex. When the type is macAce(1), the index of diffServAclAceIndexList is the diffServMacAceEntry. When the type is ipAce(2), the index of diffServAclAceIndexList is the diffServIpAceEntry. When the type is ipv6Ace(3), the index of diffServAclAceIndexList is the diffServIpv6AceEntry. When the type is arpAce(4), the index of diffServAclAceIndexList is the diffServArpAceEntry.
| ||||
| SdiffServAclAttachCtlAceIndex | 1.3.6.1.4.1.259.6.10.94.1.16.4.16.3 | Integer32 | RW | |
scalar · Integer32 · read-write · current Index for attachment control. Specifies the ACE to relate with the diffServAclAttachCtlIndex. When diffServAclAttachCtlAceType is macAce(1), the value of diffServAclAttachCtlIndex is the diffServMacAceEntry. When diffServAclAttachCtlAceType is ipAce(2), the value of diffServAclAttachCtlIndex is the diffServIpAceEntry. When diffServAclAttachCtlAceType is ipv6Ace(3), the value of diffServAclAttachCtlIndex is the diffServIpv6AceEntry. When diffServAclAttachCtlAceType is arpAce(4), the value of diffServAclAttachCtlIndex is the diffServArpAceEntry. | ||||
| SdiffServAclAttachCtlAction | 1.3.6.1.4.1.259.6.10.94.1.16.4.16.4 | INTEGER | RW | |
scalar · INTEGER · read-write · current Action for attachment control. When setting this object to attach(2) to begin the attaching operation, a particular ACE is attached to a particular ACL. When setting this object to detach(3) to begin the not attached operation, then a particular ACE is not attached to a particular ACL. When the action is finshed whether successfully or not, or no action is taken, the value of this object always is noAction(1), The value of a particular ACL is specified in the diffServAclAttachCtlAceType and diffServAclAttachCtlAceIndex.
| ||||
| TdiffServIpAceTable | 1.3.6.1.4.1.259.6.10.94.1.16.4.17 | NA | ||
table · not-accessible · current Table for IP ACE. | ||||
| RdiffServIpAceEntry | 1.3.6.1.4.1.259.6.10.94.1.16.4.17.1 | NA | ||
| CdiffServIpAceIndex | 1.3.6.1.4.1.259.6.10.94.1.16.4.17.1.1 | Integer32 | NA | |
column · Integer32 · not-accessible · current An index that uniquely identifies an entry in the IP ACE table. | ||||
| CdiffServIpAceType | 1.3.6.1.4.1.259.6.10.94.1.16.4.17.1.2 | INTEGER | RC | |
column · INTEGER · read-create · current The specified IP ACE type. When the type of this entry is modified, then this entry will be auto-unbound from the diffServAclEntry and the not supporting field of this entry will be set 0.
| ||||
| CdiffServIpAceAccess | 1.3.6.1.4.1.259.6.10.94.1.16.4.17.1.3 | INTEGER | RC | |
column · INTEGER · read-create · current Indicates the action to be taken if a packet matches this ACE.
| ||||
| CdiffServIpAceSourceIpAddr | 1.3.6.1.4.1.259.6.10.94.1.16.4.17.1.4 | IpAddress | RC | |
column · IpAddress · read-create · current The specified source IP address. The packet's source address is AND-ed with the value of IpAceSourceIpAddrBitmask and then compared against the value of this object. | ||||
| CdiffServIpAceSourceIpAddrBitmask | 1.3.6.1.4.1.259.6.10.94.1.16.4.17.1.5 | IpAddress | RC | |
column · IpAddress · read-create · current The specified source IP address mask. The packet's source address is AND-ed with the value of IpAceSourceIpAddr and then compared against the value of this object. | ||||
| CdiffServIpAceDestIpAddr | 1.3.6.1.4.1.259.6.10.94.1.16.4.17.1.6 | IpAddress | RC | |
column · IpAddress · read-create · current The specified destination IP address. The packet's destination address is AND-ed with the value of diffServIpAceDestIpAddrBitmask and then compared against the value of this object. This object may not be modified if the associated diffServIpAceType object is equal to standard(1). | ||||
| CdiffServIpAceDestIpAddrBitmask | 1.3.6.1.4.1.259.6.10.94.1.16.4.17.1.7 | IpAddress | RC | |
column · IpAddress · read-create · current The specified destination IP address mask. This object may not be modified if the associated diffServIpAceType object is equal to standard(1). | ||||
| CdiffServIpAceProtocol | 1.3.6.1.4.1.259.6.10.94.1.16.4.17.1.8 | Integer32 (0..256) | RC | |
column · Integer32 (0..256) · read-create · current The protocol number field in the IP header used to indicate the higher layer protocol as specified in RFC 1700. A value of 0 matches every IP packet. The object=256 means 'any'. For example: 0 is IP, 1 is ICMP, 2 is IGMP, 4 is IP in IP encapsulation, 6 is TCP, 9 is IGRP, 17 is UDP, 47 is GRE, 50 is ESP, 51 is AH, 88 is IGRP, 89 is OSPF, 94 is KA9Q/NOS compatible IP over IP, 103 is PIMv2, 108 is PCP. This object may not be modified if the associated diffServIpAceType object is equal to standard(1). | ||||
| CdiffServIpAcePrec | 1.3.6.1.4.1.259.6.10.94.1.16.4.17.1.9 | Integer32 (0..8) | RC | |
column · Integer32 (0..8) · read-create · current Specifies the IP precedence value to match against. The value of this object is ignored whenever the value of diffServIpAcePrec object is 8. This object may not be modified if the associated diffServIpAceType object is equal to standard(1). | ||||
| CdiffServIpAceTos | 1.3.6.1.4.1.259.6.10.94.1.16.4.17.1.10 | Integer32 (0..16) | RC | |
column · Integer32 (0..16) · read-create · current Specifies the IP ToS facility value to match against. The value of this object is ignored whenever the value of diffServIpAcePrec object is 9. This object may not be modified if the associated diffServIpAceType object is equal to standard(1). | ||||
| CdiffServIpAceDscp | 1.3.6.1.4.1.259.6.10.94.1.16.4.17.1.11 | Integer32 (0..64) | RC | |
column · Integer32 (0..64) · read-create · current Specifies the DSCP value to match against. The value of this object is ignored whenever the value of diffServIpAcePrec object is 64. This object may not be modified if the associated diffServIpAceType object is equal to standard(1). | ||||
| CdiffServIpAceSourcePortOp | 1.3.6.1.4.1.259.6.10.94.1.16.4.17.1.12 | INTEGER | RC | |
column · INTEGER · read-create · current Indicates how a packet's source TCP/UDP port number is to be compared. noOperator(1), which is the default value, means no comparison is to be made with the source TCP/UDP port number. equal(2), which is used the diffServIpAceSourcePortBitmask and the diffServIpAceMinSourcePort to match against. range(3),which is used the diffServIpAceMinSourcePort and the diffServIpAceMaxSourcePort to match against. This object may not be modified if the associated diffServIpAceType object is equal to standard(1).
| ||||
| CdiffServIpAceMinSourcePort | 1.3.6.1.4.1.259.6.10.94.1.16.4.17.1.13 | Integer32 (0..65535) | RC | |
column · Integer32 (0..65535) · read-create · current If the diffServIpAceSourcePortOp is range(3), this indicates the lower bound of the TCP/UDP port number value range. This object may not be modified if the associated diffServIpAceType object is equal to standard(1). | ||||
| CdiffServIpAceSourcePortBitmask | 1.3.6.1.4.1.259.6.10.94.1.16.4.17.1.15 | Integer32 (0..65535) | RC | |
column · Integer32 (0..65535) · read-create · current If the diffServIpAceSourcePortOp is equal(2), this indicates the bitmask of the diffServIpAceMinSourcePort. This object may not be modified if the associated diffServIpAceType object is equal to standard(1). | ||||
| CdiffServIpAceDestPortOp | 1.3.6.1.4.1.259.6.10.94.1.16.4.17.1.16 | INTEGER | RC | |
column · INTEGER · read-create · current Indicates how a packet's destination TCP/UDP port number is to be compared. noOperator(1), which is the default value, means that no comparison is to be made with the destination TCP/UDP port number. equal(2), which is used the diffServIpAceSourcePortBitmask and the diffServIpAceMinDestPort to match against. range(3),which is used the diffServIpAceMinDestPort and the diffServIpAceMaxDestPort to match against. This object may not be modified if the associated diffServIpAceType object is equal to standard(1).
| ||||
| CdiffServIpAceMinDestPort | 1.3.6.1.4.1.259.6.10.94.1.16.4.17.1.17 | Integer32 (0..65535) | RC | |
column · Integer32 (0..65535) · read-create · current If the diffServIpAceDestPortOp is range(3), this indicates the lower bound of the TCP/UDP port number value range. This object may not be modified if the associated diffServIpAceType object is equal to standard(1). | ||||
| CdiffServIpAceDestPortBitmask | 1.3.6.1.4.1.259.6.10.94.1.16.4.17.1.19 | Integer32 (0..65535) | RC | |
column · Integer32 (0..65535) · read-create · current If the diffServIpAceDestPortOp is equal(2), this indicates the bitmask of the diffServIpAceMinDestPort. This object may not be modified if the associated diffServIpAceType object is equal to standard(1). | ||||
| CdiffServIpAceControlCode | 1.3.6.1.4.1.259.6.10.94.1.16.4.17.1.20 | Integer32 (0..63) | RC | |
column · Integer32 (0..63) · read-create · current Indicates how the control flags of TCP packets are to be compared. diffServIpAceControlCode is AND-ed with diffServIpAceControlCodeBitmask. This object may not be modified if the associated diffServIpAceType object is equal to standard(1). | ||||
| CdiffServIpAceControlCodeBitmask | 1.3.6.1.4.1.259.6.10.94.1.16.4.17.1.21 | Integer32 (0..63) | RC | |
column · Integer32 (0..63) · read-create · current Indicates how the control flags of TCP packets are to be compared. It can be used to check multiple flags of the FIN, SYN, RST, PSH, ACK, URG by the sum of FIN=1, SYN=2, RST=4, PSH=8, ACK=16, URG=32. This object may not be modified if the associated diffServIpAceType object is equal to standard(1). | ||||
| CdiffServIpAceStatus | 1.3.6.1.4.1.259.6.10.94.1.16.4.17.1.22 | RowStatus | RC | |
column · RowStatus · read-create · current This object is used to create a new row or modify or delete
an existing row in this table. The status column has six
defined values:
The status column has six defined values:
- 'active', which indicates that the conceptual row is
available for use by the managed device;
- 'notInService', which indicates that the conceptual
row exists in the agent, but is unavailable for use by
the managed device (see NOTE below);
- 'notReady', which indicates that the conceptual row
exists in the agent, but is missing information
necessary in order to be available for use by the
managed device;
- 'createAndGo', which is supplied by a management
station wishing to create a new instance of a
conceptual row and to have its status automatically set
to active, making it available for use by the managed
device;
- 'createAndWait', which is supplied by a management
station wishing to create a new instance of a
conceptual row (but not make it available for use by
the managed device); and,
- 'destroy', which is supplied by a management station
wishing to delete all of the instances associated with
an existing conceptual row.
Whereas five of the six values (all except 'notReady') may
be specified in a management protocol set operation, only
three values will be returned in response to a management
protocol retrieval operation: 'notReady', 'notInService' or
'active'. That is, when queried, an existing conceptual row
has only three states: it is either available for use by
the managed device (the status column has the value
'active'); it is not available for use by the managed device,
though the agent has sufficient information to make it so
(the status column has the value 'notInService'); or, it is
not available for use by the managed device, and an attempt
to make it so would fail because the agent has insufficient
information (the state column has the value 'notReady').
For a detailed description of this object, please refer to
SNMPv2-TC MIB. | ||||
| TdiffServMacAceTable | 1.3.6.1.4.1.259.6.10.94.1.16.4.18 | NA | ||
table · not-accessible · current Table for MAC ACE. | ||||
| RdiffServMacAceEntry | 1.3.6.1.4.1.259.6.10.94.1.16.4.18.1 | NA | ||
| CdiffServMacAceIndex | 1.3.6.1.4.1.259.6.10.94.1.16.4.18.1.1 | Integer32 | NA | |
column · Integer32 · not-accessible · current An index that uniquely identifies an entry in the MAC ACE table. | ||||
| CdiffServMacAceAccess | 1.3.6.1.4.1.259.6.10.94.1.16.4.18.1.2 | INTEGER | RC | |
column · INTEGER · read-create · current Indicates the action to be taken if a packet matches this ACE.
| ||||
| CdiffServMacAcePktformat | 1.3.6.1.4.1.259.6.10.94.1.16.4.18.1.3 | INTEGER | RC | |
column · INTEGER · read-create · current Used to check the packet format of the packets. This object cannot be configured when the status of the entry, diffServMacAceStatus, is active(1).
| ||||
| CdiffServMacAceSourceMacAddr | 1.3.6.1.4.1.259.6.10.94.1.16.4.18.1.4 | MacAddress | RC | |
column · MacAddress · read-create · current Indicates the 48-bit source MAC address. The specified source MAC of the packet. The packet's source MAC address is AND-ed with the value of diffServMacAceSourceMacAddrBitmask and then compared against the value of this object. | ||||
| CdiffServMacAceSourceMacAddrBitmask | 1.3.6.1.4.1.259.6.10.94.1.16.4.18.1.5 | MacAddress | RC | |
column · MacAddress · read-create · current The specified source MAC address mask. | ||||
| CdiffServMacAceDestMacAddr | 1.3.6.1.4.1.259.6.10.94.1.16.4.18.1.6 | MacAddress | RC | |
column · MacAddress · read-create · current Indicates the 48-bit destination MAC address. The specified destination MAC of the packet. The packet's destination MAC address is AND-ed with the value of diffServMacAceDestMacAddrBitmask and then compared against the value of this object. | ||||
| CdiffServMacAceDestMacAddrBitmask | 1.3.6.1.4.1.259.6.10.94.1.16.4.18.1.7 | MacAddress | RC | |
column · MacAddress · read-create · current The specified destination MAC address mask. | ||||
| CdiffServMacAceVidOp | 1.3.6.1.4.1.259.6.10.94.1.16.4.18.1.8 | INTEGER | RC | |
column · INTEGER · read-create · current Indicates how a packet's VID is to be compared. This object cannot be configured when the status of the entry, diffServMacAceStatus, is active(1).
| ||||
| CdiffServMacAceMinVid | 1.3.6.1.4.1.259.6.10.94.1.16.4.18.1.9 | Integer32 (1..4094) | RC | |
column · Integer32 (1..4094) · read-create · current Indicates the lower bound of the VID value range if the diffServMacAceVidOp is range(3). | ||||
| CdiffServMacAceVidBitmask | 1.3.6.1.4.1.259.6.10.94.1.16.4.18.1.10 | Integer32 (0..4095) | RC | |
column · Integer32 (0..4095) · read-create · current The bit mask of the VID. The default value is 0. | ||||
| CdiffServMacAceEtherTypeOp | 1.3.6.1.4.1.259.6.10.94.1.16.4.18.1.12 | INTEGER | RC | |
column · INTEGER · read-create · current Indicates how a packet's ether type is to be compared.
| ||||
| CdiffServMacAceEtherTypeBitmask | 1.3.6.1.4.1.259.6.10.94.1.16.4.18.1.13 | Integer32 (0..65535) | RC | |
column · Integer32 (0..65535) · read-create · current The bit mask of Ether type. The default value is 0. | ||||
| CdiffServMacAceMinEtherType | 1.3.6.1.4.1.259.6.10.94.1.16.4.18.1.14 | Integer32 (0..65535) | RC | |
column · Integer32 (0..65535) · read-create · current Indicates the lower bound of the ether type value range if the diffServMacAceEtherTypeOp is range(3). | ||||
| CdiffServMacAceStatus | 1.3.6.1.4.1.259.6.10.94.1.16.4.18.1.16 | RowStatus | RC | |
column · RowStatus · read-create · current This object is used to create a new row or modify or delete
an existing row in this table. The status column has six
defined values:
The status column has six defined values:
- 'active', which indicates that the conceptual row is
available for use by the managed device;
- 'notInService', which indicates that the conceptual
row exists in the agent, but is unavailable for use by
the managed device (see NOTE below);
- 'notReady', which indicates that the conceptual row
exists in the agent, but is missing information
necessary in order to be available for use by the
managed device;
- 'createAndGo', which is supplied by a management
station wishing to create a new instance of a
conceptual row and to have its status automatically set
to active, making it available for use by the managed
device;
- 'createAndWait', which is supplied by a management
station wishing to create a new instance of a
conceptual row (but not make it available for use by
the managed device); and,
- 'destroy', which is supplied by a management station
wishing to delete all of the instances associated with
an existing conceptual row.
Whereas five of the six values (all except 'notReady') may
be specified in a management protocol set operation, only
three values will be returned in response to a management
protocol retrieval operation: 'notReady', 'notInService' or
'active'. That is, when queried, an existing conceptual row
has only three states: it is either available for use by
the managed device (the status column has the value
'active'); it is not available for use by the managed device,
though the agent has sufficient information to make it so
(the status column has the value 'notInService'); or, it is
not available for use by the managed device, and an attempt
to make it so would fail because the agent has insufficient
information (the state column has the value 'notReady').
For a detailed description of this object, please refer to
SNMPv2-TC MIB. | ||||
| CdiffServMacAceCosOp | 1.3.6.1.4.1.259.6.10.94.1.16.4.18.1.17 | INTEGER | RC | |
column · INTEGER · read-create · current Indicates how a packet's CoS is compared. If the object type of diffServMacAceCosOp is equal(2), diffServMacAceMinCos indicates the CoS value for comparing, and diffServMacAceCosBitmask is used as the bitmask of the CoS value. If the object type of diffServMacAceCosOp is range(3), diffServMacAceMinCos should be used as the lower bound of the CoS value.
| ||||
| CdiffServMacAceCosBitmask | 1.3.6.1.4.1.259.6.10.94.1.16.4.18.1.18 | INTEGER (0..7) | RC | |
column · INTEGER (0..7) · read-create · current Indicates the bitmask of the CoS value if the object type of diffServMacAceCosOp is equal(2). The default value is 0. | ||||
| CdiffServMacAceMinCos | 1.3.6.1.4.1.259.6.10.94.1.16.4.18.1.19 | INTEGER (0..7) | RC | |
column · INTEGER (0..7) · read-create · current If the object type of diffServMacAceCosOp is equal(2), diffServMacAceMinCos indicates the CoS value for comparing. If the object type of diffServMacAceCosOp is range(3), diffServMacAceMinCos indicates the lower bound of the CoS value. | ||||
| TdiffServActionTable | 1.3.6.1.4.1.259.6.10.94.1.16.4.19 | NA | ||
table · not-accessible · current Table for action. | ||||
| RdiffServActionEntry | 1.3.6.1.4.1.259.6.10.94.1.16.4.19.1 | NA | ||
| CdiffServActionIndex | 1.3.6.1.4.1.259.6.10.94.1.16.4.19.1.1 | Integer32 | NA | |
column · Integer32 · not-accessible · current An index that uniquely identifies an entry in the action table. | ||||
| CdiffServActionList | 1.3.6.1.4.1.259.6.10.94.1.16.4.19.1.2 | Bits | RC | |
column · Bits · read-create · current The bitmap value used to identify which action capabilities are enabled on the entry. The actionPktNewPri and actionPktNewDscp can not be enabled at the same time on the entry. The actionRedPktNewDscp and actionRedDrop can not be enabled at the same time on the entry.
| ||||
| CdiffServActionPktNewPri | 1.3.6.1.4.1.259.6.10.94.1.16.4.19.1.3 | Integer32 (0..7) | RC | |
column · Integer32 (0..7) · read-create · current Specifies the new priority value for the packet when the action is satisfied. If the actionPktNewPri bit of the diffServActionList is not enabled, this object can not be set. | ||||
| CdiffServActionPktNewDscp | 1.3.6.1.4.1.259.6.10.94.1.16.4.19.1.5 | Integer32 (0..63) | RC | |
column · Integer32 (0..63) · read-create · current Specifies the new DSCP value for the packet when the action is satisfied. If the actionPktNewDscp bit of the diffServActionList is not enabled, this object can not be set. | ||||
| CdiffServActionRedPktNewDscp | 1.3.6.1.4.1.259.6.10.94.1.16.4.19.1.6 | Integer32 (0..63) | RC | |
column · Integer32 (0..63) · read-create · current Specifies the new DSCP value for the red marking packet when the action is satisfied. If the actionRedPktNewDscp bit of the diffServActionList is not enabled, this object can not be set. | ||||
| CdiffServActionRedDrop | 1.3.6.1.4.1.259.6.10.94.1.16.4.19.1.7 | EnabledStatus | RO | |
column · EnabledStatus · read-only · current The actionRedDrop bit of the diffServActionList is for configuring this object. If the value of this object is enabled, the red marking packet will be dropped. | ||||
| CdiffServActionStatus | 1.3.6.1.4.1.259.6.10.94.1.16.4.19.1.8 | RowStatus | RC | |
column · RowStatus · read-create · current This object is used to create a new row, modify or
delete an existing row in this table.
The status column has six defined values:
The status column has six defined values:
- 'active', which indicates that the conceptual row
is available for use by the managed device;
- 'notInService', which indicates that the conceptual
row exists in the agent, but is unavailable for use
by the managed device (see NOTE below);
- 'notReady', which indicates that the conceptual row
exists in the agent, but is missing information
necessary in order to be available for use by the
managed device;
- 'createAndGo', which is supplied by a management
station wishing to create a new instance of a
conceptual row and to have its status automatically
set to active, making it available for use by the
managed device;
- 'createAndWait', which is supplied by a management
station wishing to create a new instance of a
conceptual row (but not make it available for use by
the managed device); and,
- 'destroy', which is supplied by a management
station wishing to delete all of the instances
associated with an existing conceptual row.
Whereas five of the six values (all except 'notReady') may
be specified in a management protocol set operation, only
three values will be returned in response to a management
protocol retrieval operation: 'notReady', 'notInService'
or 'active'. That is, when queried, an existing
conceptual row has only three states: it is either
available for use by the managed device (the status column
has the value 'active'); it is not available for use by
the managed device, though the agent has sufficient
information to make it so (the status column has the value
'notInService'); or, it is not available for use by the
managed device, and an attempt to make it so would fail
because the agent has insufficient information (the state
column has the value 'notReady').
For a detailed description of this object, please refer to
SNMPv2-TC MIB. | ||||
| TdiffServMeterTable | 1.3.6.1.4.1.259.6.10.94.1.16.4.20 | NA | ||
table · not-accessible · current Table for meter. | ||||
| RdiffServMeterEntry | 1.3.6.1.4.1.259.6.10.94.1.16.4.20.1 | NA | ||
| CdiffServMeterIndex | 1.3.6.1.4.1.259.6.10.94.1.16.4.20.1.1 | Integer32 | NA | |
column · Integer32 · not-accessible · current An entry that describes a single set of token bucket parameters. | ||||
| CdiffServMeterModel | 1.3.6.1.4.1.259.6.10.94.1.16.4.20.1.2 | INTEGER | RC | |
column · INTEGER · read-create · current The Metering algorithm associated with the Token Bucket parameters. The zeroDotZero indicates this is unknown.
| ||||
| CdiffServMeterRate | 1.3.6.1.4.1.259.6.10.94.1.16.4.20.1.3 | Integer32 (1..1000000) | RC | |
column · Integer32 (1..1000000) · read-create · current The token-bucket rate, in kilobits per second (kbps). | ||||
| CdiffServMeterBurstSize | 1.3.6.1.4.1.259.6.10.94.1.16.4.20.1.4 | Integer32 (64..524288) | RC | |
column · Integer32 (64..524288) · read-create · current The maximum number of bytes in a single transmission burst. | ||||
| CdiffServMeterInterval | 1.3.6.1.4.1.259.6.10.94.1.16.4.20.1.5 | Integer32 | RC | |
column · Integer32 · read-create · current The time interval used with the token bucket. | ||||
| CdiffServMeterStatus | 1.3.6.1.4.1.259.6.10.94.1.16.4.20.1.6 | RowStatus | RC | |
column · RowStatus · read-create · current This object is used to create a new row or modify or delete
an existing row in this table. The status column has six
defined values:
The status column has six defined values:
- 'active', which indicates that the conceptual row is
available for use by the managed device;
- 'notInService', which indicates that the conceptual
row exists in the agent, but is unavailable for use by
the managed device (see NOTE below);
- 'notReady', which indicates that the conceptual row
exists in the agent, but is missing information
necessary in order to be available for use by the
managed device;
- 'createAndGo', which is supplied by a management
station wishing to create a new instance of a
conceptual row and to have its status automatically set
to active, making it available for use by the managed
device;
- 'createAndWait', which is supplied by a management
station wishing to create a new instance of a
conceptual row (but not make it available for use by
the managed device); and,
- 'destroy', which is supplied by a management station
wishing to delete all of the instances associated with
an existing conceptual row.
Whereas five of the six values (all except 'notReady') may
be specified in a management protocol set operation, only
three values will be returned in response to a management
protocol retrieval operation: 'notReady', 'notInService' or
'active'. That is, when queried, an existing conceptual row
has only three states: it is either available for use by
the managed device (the status column has the value
'active'); it is not available for use by the managed device,
though the agent has sufficient information to make it so
(the status column has the value 'notInService'); or, it is
not available for use by the managed device, and an attempt
to make it so would fail because the agent has insufficient
information (the state column has the value 'notReady').
For a detailed description of this object, please refer to
SNMPv2-TC MIB. | ||||
| TdiffServIpv6AceTable | 1.3.6.1.4.1.259.6.10.94.1.16.4.21 | NA | ||
table · not-accessible · current Table for IPv6 ACE. | ||||
| RdiffServIpv6AceEntry | 1.3.6.1.4.1.259.6.10.94.1.16.4.21.1 | NA | ||
| CdiffServIpv6AceIndex | 1.3.6.1.4.1.259.6.10.94.1.16.4.21.1.1 | Integer32 | NA | |
column · Integer32 · not-accessible · current An index that uniquely identifies an entry in the IPv6 table. | ||||
| CdiffServIpv6AceType | 1.3.6.1.4.1.259.6.10.94.1.16.4.21.1.2 | INTEGER | RC | |
column · INTEGER · read-create · current The specified IP v6 ACE type. When the type of this entry is modified, then this entry will be auto-unbound from the diffServAclEntry and the not supporting field of this entry will be set 0.
| ||||
| CdiffServIpv6AceAccess | 1.3.6.1.4.1.259.6.10.94.1.16.4.21.1.3 | INTEGER | RC | |
column · INTEGER · read-create · current Indicates the action to be taken if a packet matches this ACE.
| ||||
| CdiffServIpv6AceSourceIpAddr | 1.3.6.1.4.1.259.6.10.94.1.16.4.21.1.4 | OCTET STRING (SIZE (0..16)) | RC | |
column · OCTET STRING (SIZE (0..16)) · read-create · current Specifies the source IPv6 address. | ||||
| CdiffServIpv6AceSourceIpAddrPrefixLen | 1.3.6.1.4.1.259.6.10.94.1.16.4.21.1.5 | Integer32 (0..128) | RC | |
column · Integer32 (0..128) · read-create · current The length (in bits) associated with the source IPv6 address prefix of this entry. | ||||
| CdiffServIpv6AceDestIpAddr | 1.3.6.1.4.1.259.6.10.94.1.16.4.21.1.6 | OCTET STRING (SIZE (0..16)) | RC | |
column · OCTET STRING (SIZE (0..16)) · read-create · current Specifies the destination IPv6 address. This object may not be modified if the associated diffServIpv6AceType object is equal to standard(1). | ||||
| CdiffServIpv6AceDestIpAddrPrefixLen | 1.3.6.1.4.1.259.6.10.94.1.16.4.21.1.7 | Integer32 (0..8) | RC | |
column · Integer32 (0..8) · read-create · current The length (in bits) associated with the destination IPv6 address prefix of this entry. This object may not be modified if the associated diffServIpv6AceType object is equal to standard(1). | ||||
| CdiffServIpv6AceDscp | 1.3.6.1.4.1.259.6.10.94.1.16.4.21.1.9 | Integer32 (0..64) | RC | |
column · Integer32 (0..64) · read-create · current Specifies the DSCP value to match against. This object may not be modified if the associated diffServIpv6AceType object is equal to standard(1). | ||||
| CdiffServIpv6AceStatus | 1.3.6.1.4.1.259.6.10.94.1.16.4.21.1.11 | RowStatus | RC | |
column · RowStatus · read-create · current This object is used to create a new row or modify or delete
an existing row in this table. The status column has six
defined values:
The status column has six defined values:
- 'active', which indicates that the conceptual row is
available for use by the managed device;
- 'notInService', which indicates that the conceptual
row exists in the agent, but is unavailable for use by
the managed device (see NOTE below);
- 'notReady', which indicates that the conceptual row
exists in the agent, but is missing information
necessary in order to be available for use by the
managed device;
- 'createAndGo', which is supplied by a management
station wishing to create a new instance of a
conceptual row and to have its status automatically set
to active, making it available for use by the managed
device;
- 'createAndWait', which is supplied by a management
station wishing to create a new instance of a
conceptual row (but not make it available for use by
the managed device); and,
- 'destroy', which is supplied by a management station
wishing to delete all of the instances associated with
an existing conceptual row.
Whereas five of the six values (all except 'notReady') may
be specified in a management protocol set operation, only
three values will be returned in response to a management
protocol retrieval operation: 'notReady', 'notInService' or
'active'. That is, when queried, an existing conceptual row
has only three states: it is either available for use by
the managed device (the status column has the value
'active'); it is not available for use by the managed device,
though the agent has sufficient information to make it so
(the status column has the value 'notInService'); or, it is
not available for use by the managed device, and an attempt
to make it so would fail because the agent has insufficient
information (the state column has the value 'notReady').
For a detailed description of this object, please refer to
SNMPv2-TC MIB. | ||||
| TdiffServArpAceTable | 1.3.6.1.4.1.259.6.10.94.1.16.4.23 | NA | ||
table · not-accessible · current The conceptual table of all of diffServArpAceEntry. | ||||
| RdiffServArpAceEntry | 1.3.6.1.4.1.259.6.10.94.1.16.4.23.1 | NA | ||
| CdiffServArpAceIndex | 1.3.6.1.4.1.259.6.10.94.1.16.4.23.1.1 | Integer32 (1..32) | NA | |
column · Integer32 (1..32) · not-accessible · current The unique index of an ACE within an ACL. | ||||
| CdiffServArpAceAction | 1.3.6.1.4.1.259.6.10.94.1.16.4.23.1.2 | INTEGER | RC | |
column · INTEGER · read-create · current Indicates the action to be taken if a packet matches this ACE. This object cannot not be configured when the status of the entry, diffServArpAceStatus, is active(1).
| ||||
| CdiffServArpAcePktType | 1.3.6.1.4.1.259.6.10.94.1.16.4.23.1.3 | INTEGER | RC | |
column · INTEGER · read-create · current Indicates the packet type to be taken if a packet matches this ACE. This object can not be configured when the status of the entry, diffServArpAceStatus, is active(1).
| ||||
| CdiffServArpAceSourceIpAddr | 1.3.6.1.4.1.259.6.10.94.1.16.4.23.1.4 | IpAddress | RC | |
column · IpAddress · read-create · current The specified source ARP address. The packet's source address is AND'ed with the value of diffServArpAceSourceIpAddrBitmask and then compared against the value of this object. This object cannot be configured when the status of the entry, diffServArpAceStatus, is active(1). | ||||
| CdiffServArpAceSourceIpAddrBitmask | 1.3.6.1.4.1.259.6.10.94.1.16.4.23.1.5 | IpAddress | RC | |
column · IpAddress · read-create · current The specified source ARP address mask. The packet's destination address is AND'ed with the value of diffServArpAceSourceIpAddr and then compared against the value of this object. | ||||
| CdiffServArpAceDestIpAddr | 1.3.6.1.4.1.259.6.10.94.1.16.4.23.1.6 | IpAddress | RC | |
column · IpAddress · read-create · current The specified destination IP address. The packet's destination address is AND'ed with the value of diffServArpAceDestIpAddrBitmask and then compared against the value of this object. | ||||
| CdiffServArpAceDestIpAddrBitmask | 1.3.6.1.4.1.259.6.10.94.1.16.4.23.1.7 | IpAddress | RC | |
column · IpAddress · read-create · current The specified destination IP address mask. | ||||
| CdiffServArpAceSourceMacAddr | 1.3.6.1.4.1.259.6.10.94.1.16.4.23.1.8 | OCTET STRING (SIZE (6)) | RC | |
column · OCTET STRING (SIZE (6)) · read-create · current Indicates the 48-bit destination MAC address. The specified source MAC of the packet. The packet's source MAC address is AND'ed with the value of aceArpSourceMacAddrBitmask and then compared against the value of this object. This object cannot be configured when the status of the entry, diffServArpAceStatus, is active(1). | ||||
| CdiffServArpAceSourceMacAddrBitmask | 1.3.6.1.4.1.259.6.10.94.1.16.4.23.1.9 | OCTET STRING (SIZE (6)) | RC | |
column · OCTET STRING (SIZE (6)) · read-create · current The specified source MAC address mask. This object cannot be configured when the status of the entry, diffServArpAceStatus, is active(1). | ||||
| CdiffServArpAceDestMacAddr | 1.3.6.1.4.1.259.6.10.94.1.16.4.23.1.10 | OCTET STRING (SIZE (6)) | RC | |
column · OCTET STRING (SIZE (6)) · read-create · current Indicates the 48-bit destination MAC address. The specified destination MAC of the packet. The packet's destination MAC address is AND'ed with the value of aceArpDestMacAddrBitmask and then compared against the value of this object. This object cannot be configured when the status of the entry, diffServArpAceStatus, is active(1). | ||||
| CdiffServArpAceDestMacAddrBitmask | 1.3.6.1.4.1.259.6.10.94.1.16.4.23.1.11 | OCTET STRING (SIZE (6)) | RC | |
column · OCTET STRING (SIZE (6)) · read-create · current The specified destination MAC address mask. This object cannot be configured when the status of the entry, diffServArpAceStatus, is active(1). | ||||
| CdiffServArpAceLogStatus | 1.3.6.1.4.1.259.6.10.94.1.16.4.23.1.12 | EnabledStatus | RC | |
column · EnabledStatus · read-create · current Indicates whether to log messages against the packets. This object cannot be configured when the status of the entry, diffServArpAceStatus, is active(1). | ||||
| CdiffServArpAceStatus | 1.3.6.1.4.1.259.6.10.94.1.16.4.23.1.13 | RowStatus | RC | |
column · RowStatus · read-create · current The status of this conceptual row entry. This object isused to manage the
creation and deletion of conceptual rows.
The status column has six defined values:
- 'active', which indicates that the conceptual row is
available for use by the managed device;
- 'notInService', which indicates that the conceptual
row exists in the agent, but is unavailable for use by
the managed device (see NOTE below);
- 'notReady', which indicates that the conceptual row
exists in the agent, but is missing information
necessary in order to be available for use by the
managed device;
- 'createAndGo', which is supplied by a management
station wishing to create a new instance of a
conceptual row and to have its status automatically set
to active, making it available for use by the managed
device;
- 'createAndWait', which is supplied by a management
station wishing to create a new instance of a
conceptual row (but not make it available for use by
the managed device); and,
- 'destroy', which is supplied by a management station
wishing to delete all of the instances associated with
an existing conceptual row.
Whereas five of the six values (all except 'notReady') may
be specified in a management protocol set operation, only
three values will be returned in response to a management
protocol retrieval operation: 'notReady', 'notInService' or
'active'. That is, when queried, an existing conceptual row
has only three states: it is either available for use by
the managed device (the status column has value 'active');
it is not available for use by the managed device, though
the agent has sufficient information to make it so (the
status column has value 'notInService'); or, it is not
available for use by the managed device, and an attempt to
make it so would fail because the agent has insufficient
information (the state column has value 'notReady').
For a detailed description of this object, please refer to
SNMPv2-TC MIB. | ||||
| TdiffServArpTable | 1.3.6.1.4.1.259.6.10.94.1.16.4.24 | NA | ||
table · not-accessible · current The conceptual table of all of diffServArpEntry. | ||||
| RdiffServArpEntry | 1.3.6.1.4.1.259.6.10.94.1.16.4.24.1 | NA | ||
| CdiffServArpAclName | 1.3.6.1.4.1.259.6.10.94.1.16.4.24.1.1 | DisplayString (SIZE (1..16)) | RO | |
column · DisplayString (SIZE (1..16)) · read-only · current The name of an ACL. Within a feature, a unique name is used to identify the list to which the entry belongs in the device. | ||||
| NdiffServTcamMgt | 1.3.6.1.4.1.259.6.10.94.1.16.4.25 | |||
| SdiffServTcamTotalPolicyControlEntries | 1.3.6.1.4.1.259.6.10.94.1.16.4.25.1 | Integer32 | RO | |
scalar · Integer32 · read-only · current The total number of policy control entries. | ||||
| SdiffServTcamFreePolicyControlEntries | 1.3.6.1.4.1.259.6.10.94.1.16.4.25.2 | Integer32 | RO | |
scalar · Integer32 · read-only · current The free number of policy control entries. | ||||
| SdiffServTcamUtilization | 1.3.6.1.4.1.259.6.10.94.1.16.4.25.3 | Integer32 (0..10000) | RO | |
scalar · Integer32 (0..10000) · read-only · current TCAM utilization in hundredths of a percent. | ||||
| NsecurityMgt | 1.3.6.1.4.1.259.6.10.94.1.17 | |||
| NprivateVlanMgt | 1.3.6.1.4.1.259.6.10.94.1.17.1 | |||
| SprivateVlanStatus | 1.3.6.1.4.1.259.6.10.94.1.17.1.1 | EnabledStatus | RW | |
scalar · EnabledStatus · read-write · current This controls whether private VLAN is enabled. | ||||
| TprivateVlanVlanTable | 1.3.6.1.4.1.259.6.10.94.1.17.1.4 | NA | ||
table · not-accessible · current A table containing private VLAN information on the VLANs which currently exist. | ||||
| RprivateVlanVlanEntry | 1.3.6.1.4.1.259.6.10.94.1.17.1.4.1 | NA | ||
row · not-accessible · current A conceptual row containing the private VLAN information on the VLANs for a particular management domain.
| ||||
| CprivateVlanVlanIndex | 1.3.6.1.4.1.259.6.10.94.1.17.1.4.1.1 | Integer32 (1..4094) | NA | |
column · Integer32 (1..4094) · not-accessible · current The VLAN ID of this private VLAN. | ||||
| CprivateVlanVlanType | 1.3.6.1.4.1.259.6.10.94.1.17.1.4.1.2 | INTEGER | RC | |
column · INTEGER · read-create · current The VLAN type as defined for Private VLAN feature. Set the value to invalid(1) to destroy an entry. Set other values to create an entry. If an index already exists, set others to modifiy it. Note that a VLAN's private VLAN type cannot be changed once it has any port members.
| ||||
| CprivateVlanAssoicatedPrimaryVlan | 1.3.6.1.4.1.259.6.10.94.1.17.1.4.1.3 | Integer32 (0..4094) | RC | |
column · Integer32 (0..4094) · read-create · current The VLAN ID of the associated primary VLAN used for the private VLAN feature if privateVlanVlanType has the value of isolated(3), community(4). If privateVlanVlanType has the value of primary(2), then this object has the value of 0. Note that one isolated VLAN can only be associated with one unique primary VLAN. One primary VLAN can only be associated with one isolated VLAN. One primary VLAN can be associated with multiple community VLANs; one community VLAN can only be associated with one unique primary VLAN. | ||||
| TprivateVlanPrivatePortTable | 1.3.6.1.4.1.259.6.10.94.1.17.1.5 | NA | ||
table · not-accessible · current A table containing information on the configuration of secondary VLANs on the device ports. | ||||
| RprivateVlanPrivatePortEntry | 1.3.6.1.4.1.259.6.10.94.1.17.1.5.1 | NA | ||
row · not-accessible · current A conceptual row containing information of the configuration of secondary VLANs for each port. An entry is created by the managed system for each interface which can be configured as a private port for Private VLAN feature. | ||||
| CprivateVlanPrivatePortIfIndex | 1.3.6.1.4.1.259.6.10.94.1.17.1.5.1.1 | Integer32 | NA | |
column · Integer32 · not-accessible · current This is defined as the ifIndex. | ||||
| CprivateVlanPrivatePortSecondaryVlan | 1.3.6.1.4.1.259.6.10.94.1.17.1.5.1.2 | Integer32 (0..4094) | RW | |
column · Integer32 (0..4094) · read-write · current The VLAN ID of the secondary VLAN configured on this private port. A private port is a port that allows ingress traffic of the secondary VLAN as well as egress traffic of its associated primary VLAN, but blocks the egress traffic of the isolated VLAN while allowing the egress traffic of the community or twoWayCommunity VLAN depending on the type of the secondary VLAN. Note that a port can join a secondary VLAN only after this secondary VLAN has been associated with a primary VLAN, i.e., the cpvlanVlanAssociatedPrimaryVlan has a non-zero value. The default value of 0 for this object means this port has not yet joined a secondary VLAN. | ||||
| TprivateVlanPromPortTable | 1.3.6.1.4.1.259.6.10.94.1.17.1.6 | NA | ||
table · not-accessible · current A table containing secondary VLAN to primary VLAN remapping information on ports of the device. | ||||
| RprivateVlanPromPortEntry | 1.3.6.1.4.1.259.6.10.94.1.17.1.6.1 | NA | ||
row · not-accessible · current A conceptual row containing secondary VLAN to primary VLAN remapping information for each port. An entry is created by the managed system for each interface which can be configured as a promiscuous port for the private VLAN feature. | ||||
| CprivateVlanPromPortIfIndex | 1.3.6.1.4.1.259.6.10.94.1.17.1.6.1.1 | Integer32 | NA | |
column · Integer32 · not-accessible · current This is defined as ifIndex. | ||||
| CprivateVlanPromPortPrimaryVlanId | 1.3.6.1.4.1.259.6.10.94.1.17.1.6.1.2 | Integer32 (0..4094) | RW | |
column · Integer32 (0..4094) · read-write · current The primary VLAN ID of the promiscous port. | ||||
| CprivateVlanPromPortSecondaryRemap | 1.3.6.1.4.1.259.6.10.94.1.17.1.6.1.3 | OCTET STRING (SIZE (0..128)) | RO | |
column · OCTET STRING (SIZE (0..128)) · read-only · current A string of octets containing one bit per VLAN in the management domain on this port. The first octet corresponds to VLANs with VlanIndexOrZero values of 0 through 7; the second octet to VLANs 8 through 15; etc. The most significant bit of each octet corresponds to the lowest value VlanIndexOrZero in that octet. Note that if the length of this string is less than 128 octets, any 'missing' octets are assumed to contain the value zero. An NMS may omit any zero-valued octets from the end of this string in order to reduce SetPDU size, and the agent may also omit zero-valued trailing octets, to reduce the size of GetResponse PDUs. | ||||
| CprivateVlanPromPortSecondaryRemap2k | 1.3.6.1.4.1.259.6.10.94.1.17.1.6.1.4 | OCTET STRING (SIZE (0..128)) | RO | |
column · OCTET STRING (SIZE (0..128)) · read-only · current A string of octets containing one bit per VLAN for VLANs with VlanIndexOrZero values of 1024 through 2047 in the management domain on this port. The first octet corresponds to VLANs with VlanIndexOrZero values of 1024 through 1031; the second octet to VLANs 1032 through 1039; etc. The most significant bit of each octet corresponds to the lowest value VlanIndexOrZero in that octet. Note that if the length of this string is less than 128 octets, any 'missing' octets are assumed to contain the value zero. An NMS may omit any zero-valued octets from the end of this string in order to reduce SetPDU size, and the agent may also omit zero-valued trailing octets, to reduce the size of GetResponse PDUs. This object is only instantiated on devices which support the range of VlanIndexOrZero up to 4095. | ||||
| CprivateVlanPromPortSecondaryRemap3k | 1.3.6.1.4.1.259.6.10.94.1.17.1.6.1.5 | OCTET STRING (SIZE (0..128)) | RO | |
column · OCTET STRING (SIZE (0..128)) · read-only · current A string of octets containing one bit per VLAN for VLANs with VlanIndexOrZero values of 2048 through 3071 in the management domain on this port. The first octet corresponds to VLANs with VlanIndexOrZero values of 2048 through 2055; the second octet to VLANs 2056 through 2063; etc. The most significant bit of each octet corresponds to the lowest value VlanIndexOrZero in that octet. Note that if the length of this string is less than 128 octets, any 'missing' octets are assumed to contain the value zero. An NMS may omit any zero-valued octets from the end of this string in order to reduce SetPDU size, and the agent may also omit zero-valued trailing octets, to reduce the size of GetResponse PDUs. This object is only instantiated on devices which support the range of VlanIndexOrZero up to 4095. | ||||
| CprivateVlanPromPortSecondaryRemap4k | 1.3.6.1.4.1.259.6.10.94.1.17.1.6.1.6 | OCTET STRING (SIZE (0..128)) | RO | |
column · OCTET STRING (SIZE (0..128)) · read-only · current A string of octets containing one bit per VLAN for VLANs with VlanIndexOrZero values of 3072 through 4095 in the management domain on this port. The first octet corresponds to VLANs with VlanIndexOrZero values of 3072 through 3079; the second octet to VLANs 3080 through 3087; etc. The most significant bit of each octet corresponds to the lowest value VlanIndexOrZero in that octet. Note that if the length of this string is less than 128 octets, any 'missing' octets are assumed to contain the value zero. An NMS may omit any zero-valued octets from the end of this string in order to reduce SetPDU size, and the agent may also omit zero-valued trailing octets, to reduce the size of GetResponse PDUs. This object is only instantiated on devices which support the range of VlanIndexOrZero up to 4095. | ||||
| TprivateVlanSessionTable | 1.3.6.1.4.1.259.6.10.94.1.17.1.8 | NA | ||
table · not-accessible · current Contains the settings for private VLAN Session. | ||||
| RprivateVlanSessionEntry | 1.3.6.1.4.1.259.6.10.94.1.17.1.8.1 | NA | ||
row · not-accessible · current A conceptual row in the privateVlanSession table.
| ||||
| CprivateVlanSessionId | 1.3.6.1.4.1.259.6.10.94.1.17.1.8.1.1 | INTEGER | NA | |
column · INTEGER · not-accessible · current The session ID that may specifiy certain entry in the table which contains private VLAN session information. | ||||
| CprivateVlanSessionUplinkPorts | 1.3.6.1.4.1.259.6.10.94.1.17.1.8.1.2 | PortList | RC | |
column · PortList · read-create · current This is the list of uplink ports for a session of private VLAN. They should not overlap with the privateVlanSessionPortDownlink of the same session, and they also should not overlap with the privateVlanSessionPortUplink and the privateVlanSessionPortDownlink of other session. | ||||
| CprivateVlanSessionDownlinkPorts | 1.3.6.1.4.1.259.6.10.94.1.17.1.8.1.3 | PortList | RC | |
column · PortList · read-create · current This is the list of downlink ports for a session of private VLAN. They should not overlap with the privateVlanSessionPortUplink of the same session, and they also should not overlap with the privateVlanSessionPortUplink and the privateVlanSessionPortDownlink of other session. | ||||
| CprivateVlanSessionStatus | 1.3.6.1.4.1.259.6.10.94.1.17.1.8.1.4 | ValidStatus | RC | |
column · ValidStatus · read-create · current Set this to valid(1) to create an entry. Sets this to invalid(2) to destroy an entry. | ||||
| SprivateVlanUplinkToUplink | 1.3.6.1.4.1.259.6.10.94.1.17.1.9 | INTEGER | RW | |
scalar · INTEGER · read-write · current Sets this to blocking(2) to deny the traffic of uplink ports between different sessions. Set this to forwarding(1) to allow the traffic of uplink ports between different sessions.
| ||||
| NportSecurityMgt | 1.3.6.1.4.1.259.6.10.94.1.17.2 | |||
| TportSecPortTable | 1.3.6.1.4.1.259.6.10.94.1.17.2.1 | NA | ||
table · not-accessible · current The port security(MAC binding) Table. | ||||
| RportSecPortEntry | 1.3.6.1.4.1.259.6.10.94.1.17.2.1.1 | NA | ||
| CportSecPortIndex | 1.3.6.1.4.1.259.6.10.94.1.17.2.1.1.1 | Integer32 | NA | |
column · Integer32 · not-accessible · current The port and the trunk (excluding trunk members) interface of the portTable. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex in the IF-MIB. | ||||
| CportSecPortStatus | 1.3.6.1.4.1.259.6.10.94.1.17.2.1.1.2 | EnabledStatus | RW | |
column · EnabledStatus · read-write · current Set enabled(1) to enable port security and set disabled(2) to disable port security. | ||||
| CportSecAction | 1.3.6.1.4.1.259.6.10.94.1.17.2.1.1.3 | INTEGER | RW | |
column · INTEGER · read-write · current The corresponding actions that will take place when a port is under intrusion, when this variable is set to none(1), no action will be performed, when this variable is set to trap(2), a swPortSecurityTrap trap will be sent, when this variable is set to shutdown(3), the port will shutdown, when this variable is set to trapAndShutdown(4), a swPortSecurityTrap will be sent and the port will shutdown.
| ||||
| CportSecMaxMacCount | 1.3.6.1.4.1.259.6.10.94.1.17.2.1.1.4 | Integer32 (0..1024) | RW | |
column · Integer32 (0..1024) · read-write · current The maximun number of MAC addresses that will be learned and locked. When we change the value of this variable, if the portSecPortStatus is enabled, we will discard all secure MAC and begin to learn again, until the number of MAC has reached this value, and only the secure MAC addresses can enter this port. If the portSecPortStatus is disabled, we will begin to learn the MAC, and auto enabled the portSecPortStatus when the MAC has reached this value. | ||||
| NradiusMgt | 1.3.6.1.4.1.259.6.10.94.1.17.4 | |||
| SradiusServerGlobalAuthPort | 1.3.6.1.4.1.259.6.10.94.1.17.4.1 | Integer32 (1..65535) | RW | |
scalar · Integer32 (1..65535) · read-write · current Aauthentication port number for RADIUS server. When specified radius server do not set aauthentication port number, this value is used. | ||||
| SradiusServerGlobalAcctPort | 1.3.6.1.4.1.259.6.10.94.1.17.4.2 | Integer32 (1..65535) | RW | |
scalar · Integer32 (1..65535) · read-write · current Accounting port number of RADIUS server. When specified radius server do not set accounting port number, this value is used. | ||||
| SradiusServerGlobalKey | 1.3.6.1.4.1.259.6.10.94.1.17.4.3 | DisplayString (SIZE (0..48)) | RW | |
scalar · DisplayString (SIZE (0..48)) · read-write · current Key for RADIUS. This variable can only be written. When this variable is read, it always returns a zero-length string. When specified radius server do not set key, this this value is used. | ||||
| SradiusServerGlobalRetransmit | 1.3.6.1.4.1.259.6.10.94.1.17.4.4 | INTEGER (1..30) | RW | |
scalar · INTEGER (1..30) · read-write · current Maximum number of retransmissions for RADIUS. When specified radius server do not set maximum number of retransmissions, this value is used. | ||||
| SradiusServerGlobalTimeout | 1.3.6.1.4.1.259.6.10.94.1.17.4.5 | INTEGER (1..65535) | RW | |
scalar · INTEGER (1..65535) · read-write · current Timeout for RADIUS. When specified radius server do not set timeout, this value is used. | ||||
| TradiusServerTable | 1.3.6.1.4.1.259.6.10.94.1.17.4.7 | NA | ||
table · not-accessible · current The table for RADIUS server. | ||||
| RradiusServerEntry | 1.3.6.1.4.1.259.6.10.94.1.17.4.7.1 | NA | ||
| CradiusServerIndex | 1.3.6.1.4.1.259.6.10.94.1.17.4.7.1.1 | Integer32 | NA | |
column · Integer32 · not-accessible · current The RADIUS server index in the table. | ||||
| CradiusServerAddress | 1.3.6.1.4.1.259.6.10.94.1.17.4.7.1.2 | IpAddress | RC | |
column · IpAddress · read-create · current IP address of a RADIUS server. | ||||
| CradiusServerAuthPortNumber | 1.3.6.1.4.1.259.6.10.94.1.17.4.7.1.3 | Integer32 (1..65535) | RC | |
column · Integer32 (1..65535) · read-create · current Authentication port number of RADIUS server. | ||||
| CradiusServerAcctPortNumber | 1.3.6.1.4.1.259.6.10.94.1.17.4.7.1.4 | Integer32 (1..65535) | RC | |
column · Integer32 (1..65535) · read-create · current Accounting port number of RADIUS server. | ||||
| CradiusServerKey | 1.3.6.1.4.1.259.6.10.94.1.17.4.7.1.5 | DisplayString (SIZE (0..48)) | RW | |
column · DisplayString (SIZE (0..48)) · read-write · current Key for RADIUS. This variable can only be written. When this variable is read, it always returns a zero-length string. | ||||
| CradiusServerRetransmit | 1.3.6.1.4.1.259.6.10.94.1.17.4.7.1.6 | Integer32 (1..30) | RW | |
column · Integer32 (1..30) · read-write · current Timeout for RADIUS. | ||||
| CradiusServerTimeout | 1.3.6.1.4.1.259.6.10.94.1.17.4.7.1.7 | Integer32 (1..65535) | RW | |
column · Integer32 (1..65535) · read-write · current Timeout for RADIUS. | ||||
| CradiusServerStatus | 1.3.6.1.4.1.259.6.10.94.1.17.4.7.1.8 | ValidStatus | RC | |
column · ValidStatus · read-create · current Setting this to valid(1) creates an entry. Setting this to invalid(2) destroys an entry. | ||||
| NtacacsMgt | 1.3.6.1.4.1.259.6.10.94.1.17.5 | |||
| StacacsPlusServerGlobalPortNumber | 1.3.6.1.4.1.259.6.10.94.1.17.5.2 | Integer32 (1..65535) | RW | |
scalar · Integer32 (1..65535) · read-write · current TCP port number of TACACS+ server. When specified TACACS+ server do not set TCP port number, this this value is used. | ||||
| StacacsPlusServerGlobalKey | 1.3.6.1.4.1.259.6.10.94.1.17.5.3 | DisplayString (SIZE (0..48)) | RW | |
scalar · DisplayString (SIZE (0..48)) · read-write · current The encryption key used to encrpt the traffic between client and TACACS+ server. Do not use blank spaces in the string. This variable can only be set. When this variable is read, it always returns a zero-length string.When specified TACACS+ server do not set the encryption key , this this value is used. | ||||
| TtacacsPlusServerTable | 1.3.6.1.4.1.259.6.10.94.1.17.5.4 | NA | ||
table · not-accessible · current The table for TACACS+ server. | ||||
| RtacacsPlusServerEntry | 1.3.6.1.4.1.259.6.10.94.1.17.5.4.1 | NA | ||
row · not-accessible · current The conceptual row for tacacsPlusServerTable. | ||||
| CtacacsPlusServerIndex | 1.3.6.1.4.1.259.6.10.94.1.17.5.4.1.1 | Integer32 | NA | |
column · Integer32 · not-accessible · current TACACS+ server index. | ||||
| CtacacsPlusServerAddress | 1.3.6.1.4.1.259.6.10.94.1.17.5.4.1.2 | IpAddress | RC | |
column · IpAddress · read-create · current IP address of a TACACS+ server. | ||||
| CtacacsPlusServerPortNumber | 1.3.6.1.4.1.259.6.10.94.1.17.5.4.1.3 | Integer32 (1..65535) | RC | |
column · Integer32 (1..65535) · read-create · current TCP port number of a TACACS+ server. | ||||
| CtacacsPlusServerKey | 1.3.6.1.4.1.259.6.10.94.1.17.5.4.1.4 | DisplayString (SIZE (0..48)) | RC | |
column · DisplayString (SIZE (0..48)) · read-create · current The encryption key used to encrpt the traffic between client and TACACS+ server. Do not use blank spaces in the string. This variable can only be set. When this variable is read, it always returns a zero-length string. | ||||
| CtacacsPlusServerStatus | 1.3.6.1.4.1.259.6.10.94.1.17.5.4.1.8 | ValidStatus | RC | |
column · ValidStatus · read-create · current Setting this to valid(1) creates an entry. Setting this to invalid(2) destroys an entry. | ||||
| CtacacsPlusServerRetransmit | 1.3.6.1.4.1.259.6.10.94.1.17.5.4.1.9 | Integer32 (1..30) | RC | |
column · Integer32 (1..30) · read-create · current The maximum number of retransmissions for TACACS+. | ||||
| CtacacsPlusServerTimeout | 1.3.6.1.4.1.259.6.10.94.1.17.5.4.1.10 | Integer32 (1..540) | RC | |
column · Integer32 (1..540) · read-create · current Timeout for TACACS+.
| ||||
| StacacsPlusServerGlobalRetransmit | 1.3.6.1.4.1.259.6.10.94.1.17.5.5 | Integer32 (1..30) | RW | |
scalar · Integer32 (1..30) · read-write · current The maximum number of retransmissions for TACACS+ global server. | ||||
| StacacsPlusServerGlobalTimeout | 1.3.6.1.4.1.259.6.10.94.1.17.5.6 | Integer32 (1..540) | RW | |
scalar · Integer32 (1..540) · read-write · current Timeout for TACACS+ global server.
| ||||
| NsshMgt | 1.3.6.1.4.1.259.6.10.94.1.17.6 | |||
| SsshServerStatus | 1.3.6.1.4.1.259.6.10.94.1.17.6.1 | EnabledStatus | RW | |
scalar · EnabledStatus · read-write · current The status of Secure Shell Server. Set this value to enabled(1) to enable SSH server, set this value to disabled(2) to disable the SSH server. | ||||
| SsshServerMajorVersion | 1.3.6.1.4.1.259.6.10.94.1.17.6.2 | Integer32 | RO | |
scalar · Integer32 · read-only · current The major version of the SSH Server. | ||||
| SsshServerMinorVersion | 1.3.6.1.4.1.259.6.10.94.1.17.6.3 | Integer32 | RO | |
scalar · Integer32 · read-only · current The minor version of the SSH Server. | ||||
| SsshTimeout | 1.3.6.1.4.1.259.6.10.94.1.17.6.4 | INTEGER (1..120) | RW | |
scalar · INTEGER (1..120) · read-write · current The time interval that the router waits for the SSH client to respond. The range is 1-120.
| ||||
| SsshAuthRetries | 1.3.6.1.4.1.259.6.10.94.1.17.6.5 | INTEGER (1..5) | RW | |
scalar · INTEGER (1..5) · read-write · current The number of attempts after which the interface is reset. The range is 1-5. | ||||
| TsshConnInfoTable | 1.3.6.1.4.1.259.6.10.94.1.17.6.6 | NA | ||
table · not-accessible · current The table for Secure Shell Connection. | ||||
| RsshConnInfoEntry | 1.3.6.1.4.1.259.6.10.94.1.17.6.6.1 | NA | ||
| CsshConnID | 1.3.6.1.4.1.259.6.10.94.1.17.6.6.1.1 | Integer32 | NA | |
column · Integer32 · not-accessible · current The connection ID of the Secure Shell Connection. | ||||
| CsshConnMajorVersion | 1.3.6.1.4.1.259.6.10.94.1.17.6.6.1.2 | Integer32 | RO | |
column · Integer32 · read-only · current The SSH major version. | ||||
| CsshConnMinorVersion | 1.3.6.1.4.1.259.6.10.94.1.17.6.6.1.3 | Integer32 | RO | |
column · Integer32 · read-only · current The SSH minor version. | ||||
| CsshConnStatus | 1.3.6.1.4.1.259.6.10.94.1.17.6.6.1.5 | INTEGER | RO | |
column · INTEGER · read-only · current The SSH connection State. negotiationStart(1) means the SSH is in its negotiation start state, authenticationStart(2) means the SSH is in authentication start state, sessionStart(3) means the SSH is in session start State.
| ||||
| CsshConnUserName | 1.3.6.1.4.1.259.6.10.94.1.17.6.6.1.6 | DisplayString (SIZE (1..8)) | RO | |
column · DisplayString (SIZE (1..8)) · read-only · current The user name of the connection. | ||||
| CsshDisconnect | 1.3.6.1.4.1.259.6.10.94.1.17.6.6.1.7 | INTEGER | RW | |
column · INTEGER · read-write · current Set the variable to disconnect the connection, noDisconnect(1) will always be obtained when reading this variable.
| ||||
| CsshConnEncryptionTypeStr | 1.3.6.1.4.1.259.6.10.94.1.17.6.6.1.8 | DisplayString (SIZE (0..64)) | RO | |
column · DisplayString (SIZE (0..64)) · read-only · current The encryption type of the SSH. | ||||
| SsshKeySize | 1.3.6.1.4.1.259.6.10.94.1.17.6.7 | INTEGER (512..896) | RW | |
scalar · INTEGER (512..896) · read-write · current The SSH server key size. | ||||
| SsshRsaHostKey1 | 1.3.6.1.4.1.259.6.10.94.1.17.6.8 | KeySegment | RO | |
scalar · KeySegment · read-only · current The RSA host key segment 1. | ||||
| SsshRsaHostKey2 | 1.3.6.1.4.1.259.6.10.94.1.17.6.9 | KeySegment | RO | |
scalar · KeySegment · read-only · current The RSA host key segment 2. | ||||
| SsshRsaHostKey3 | 1.3.6.1.4.1.259.6.10.94.1.17.6.10 | KeySegment | RO | |
scalar · KeySegment · read-only · current The RSA host key segment 3. | ||||
| SsshRsaHostKey4 | 1.3.6.1.4.1.259.6.10.94.1.17.6.11 | KeySegment | RO | |
scalar · KeySegment · read-only · current The RSA host key segment 4. | ||||
| SsshRsaHostKey5 | 1.3.6.1.4.1.259.6.10.94.1.17.6.12 | KeySegment | RO | |
scalar · KeySegment · read-only · current The RSA host key segment 5. | ||||
| SsshRsaHostKey6 | 1.3.6.1.4.1.259.6.10.94.1.17.6.13 | KeySegment | RO | |
scalar · KeySegment · read-only · current The RSA host key segment 6. | ||||
| SsshRsaHostKey7 | 1.3.6.1.4.1.259.6.10.94.1.17.6.14 | KeySegment | RO | |
scalar · KeySegment · read-only · current The RSA host key segment 7. | ||||
| SsshRsaHostKey8 | 1.3.6.1.4.1.259.6.10.94.1.17.6.15 | KeySegment | RO | |
scalar · KeySegment · read-only · current The RSA host key segment 8. | ||||
| SsshDsaHostKey1 | 1.3.6.1.4.1.259.6.10.94.1.17.6.16 | KeySegment | RO | |
scalar · KeySegment · read-only · current The DSA host key segment 1. | ||||
| SsshDsaHostKey2 | 1.3.6.1.4.1.259.6.10.94.1.17.6.17 | KeySegment | RO | |
scalar · KeySegment · read-only · current The DSA host key segment 2. | ||||
| SsshDsaHostKey3 | 1.3.6.1.4.1.259.6.10.94.1.17.6.18 | KeySegment | RO | |
scalar · KeySegment · read-only · current The DSA host key segment 3. | ||||
| SsshDsaHostKey4 | 1.3.6.1.4.1.259.6.10.94.1.17.6.19 | KeySegment | RO | |
scalar · KeySegment · read-only · current The DSA host key segment 4. | ||||
| SsshDsaHostKey5 | 1.3.6.1.4.1.259.6.10.94.1.17.6.20 | KeySegment | RO | |
scalar · KeySegment · read-only · current The DSA host key segment 5. | ||||
| SsshDsaHostKey6 | 1.3.6.1.4.1.259.6.10.94.1.17.6.21 | KeySegment | RO | |
scalar · KeySegment · read-only · current The DSA host key segment 6. | ||||
| SsshDsaHostKey7 | 1.3.6.1.4.1.259.6.10.94.1.17.6.22 | KeySegment | RO | |
scalar · KeySegment · read-only · current The DSA host key segment 7. | ||||
| SsshDsaHostKey8 | 1.3.6.1.4.1.259.6.10.94.1.17.6.23 | KeySegment | RO | |
scalar · KeySegment · read-only · current The DSA host key segment 8. | ||||
| SsshHostKeyGenAction | 1.3.6.1.4.1.259.6.10.94.1.17.6.24 | INTEGER | RW | |
scalar · INTEGER · read-write · current This variable is for host key generating. For the set behavior: Set it to genRsaKey(2) to generate the RSA host key, and to genDsaKey(3) to generate the DSA host key, if genBothKeys(4) is set, both RSA and DSA host key are generated. For the get behavior: You will get genRsaKey(2), genDsaKey(3) or genBothKeys(4) when the key gen action is in progress. otherwise, you will get noGen(1).
| ||||
| SsshHostKeyGenStatus | 1.3.6.1.4.1.259.6.10.94.1.17.6.25 | INTEGER | RO | |
scalar · INTEGER · read-only · current The result of the last KeyGen status. if no key gen action has been performed. you will get unknown(1) status.
| ||||
| SsshHostKeySaveAction | 1.3.6.1.4.1.259.6.10.94.1.17.6.26 | INTEGER | RW | |
scalar · INTEGER · read-write · current To save host key from memory to flash. For the set behavior: Set it to save(2) to perform the save operation. For the get behavior: You will get save(1) when the save action is in progress. Otherwise, you will get noSave(1).
| ||||
| SsshHostKeySaveStatus | 1.3.6.1.4.1.259.6.10.94.1.17.6.27 | INTEGER | RO | |
scalar · INTEGER · read-only · current The result of the last savekey status. If no save action has been performed, you will get unknown(1) status.
| ||||
| SsshHostKeyDelAction | 1.3.6.1.4.1.259.6.10.94.1.17.6.28 | INTEGER | RW | |
scalar · INTEGER · read-write · current To delete the host key. For the set behavior: Set it to delRsaKey(2) to delete the RSA host key, to delDsaKey(3) to delete the DSA host key, or to delBothKeys(4) to delete both RSA and DSA host key. For the get behavior: You will get delRsaKey(2), delDsaKey(3) or delBothKeys(4) when the delete operation is in progress. Otherwise, you will get noDel(1).
| ||||
| TsshUserTable | 1.3.6.1.4.1.259.6.10.94.1.17.6.29 | NA | ||
table · not-accessible · current The conceptual table of all of sshUserEntry. | ||||
| RsshUserEntry | 1.3.6.1.4.1.259.6.10.94.1.17.6.29.1 | NA | ||
| CsshUserName | 1.3.6.1.4.1.259.6.10.94.1.17.6.29.1.1 | DisplayString (SIZE (1..8)) | NA | |
column · DisplayString (SIZE (1..8)) · not-accessible · current User Name. | ||||
| CsshUserRsaKey1 | 1.3.6.1.4.1.259.6.10.94.1.17.6.29.1.2 | KeySegment | RO | |
column · KeySegment · read-only · current The RSA user key segment 1. | ||||
| CsshUserRsaKey2 | 1.3.6.1.4.1.259.6.10.94.1.17.6.29.1.3 | KeySegment | RO | |
column · KeySegment · read-only · current The RSA user key segment 2. | ||||
| CsshUserRsaKey3 | 1.3.6.1.4.1.259.6.10.94.1.17.6.29.1.4 | KeySegment | RO | |
column · KeySegment · read-only · current The RSA user key segment 3. | ||||
| CsshUserRsaKey4 | 1.3.6.1.4.1.259.6.10.94.1.17.6.29.1.5 | KeySegment | RO | |
column · KeySegment · read-only · current The RSA user key segment 4. | ||||
| CsshUserRsaKey5 | 1.3.6.1.4.1.259.6.10.94.1.17.6.29.1.6 | KeySegment | RO | |
column · KeySegment · read-only · current The RSA user key segment 5. | ||||
| CsshUserRsaKey6 | 1.3.6.1.4.1.259.6.10.94.1.17.6.29.1.7 | KeySegment | RO | |
column · KeySegment · read-only · current The RSA user key segment 6. | ||||
| CsshUserRsaKey7 | 1.3.6.1.4.1.259.6.10.94.1.17.6.29.1.8 | KeySegment | RO | |
column · KeySegment · read-only · current The RSA user key segment 7. | ||||
| CsshUserRsaKey8 | 1.3.6.1.4.1.259.6.10.94.1.17.6.29.1.9 | KeySegment | RO | |
column · KeySegment · read-only · current The RSA user key segment 8. | ||||
| CsshUserDsaKey1 | 1.3.6.1.4.1.259.6.10.94.1.17.6.29.1.10 | KeySegment | RO | |
column · KeySegment · read-only · current The DSA user key segment 1. | ||||
| CsshUserDsaKey2 | 1.3.6.1.4.1.259.6.10.94.1.17.6.29.1.11 | KeySegment | RO | |
column · KeySegment · read-only · current The DSA user key segment 2. | ||||
| CsshUserDsaKey3 | 1.3.6.1.4.1.259.6.10.94.1.17.6.29.1.12 | KeySegment | RO | |
column · KeySegment · read-only · current The DSA user key segment 3. | ||||
| CsshUserDsaKey4 | 1.3.6.1.4.1.259.6.10.94.1.17.6.29.1.13 | KeySegment | RO | |
column · KeySegment · read-only · current The DSA user key segment 4. | ||||
| CsshUserDsaKey5 | 1.3.6.1.4.1.259.6.10.94.1.17.6.29.1.14 | KeySegment | RO | |
column · KeySegment · read-only · current The DSA user key segment 5. | ||||
| CsshUserDsaKey6 | 1.3.6.1.4.1.259.6.10.94.1.17.6.29.1.15 | KeySegment | RO | |
column · KeySegment · read-only · current The DSA user key segment 6. | ||||
| CsshUserDsaKey7 | 1.3.6.1.4.1.259.6.10.94.1.17.6.29.1.16 | KeySegment | RO | |
column · KeySegment · read-only · current The DSA user key segment 7. | ||||
| CsshUserDsaKey8 | 1.3.6.1.4.1.259.6.10.94.1.17.6.29.1.17 | KeySegment | RO | |
column · KeySegment · read-only · current The DSA user key segment 8. | ||||
| CsshUserKeyDelAction | 1.3.6.1.4.1.259.6.10.94.1.17.6.29.1.18 | INTEGER | RW | |
column · INTEGER · read-write · current To delete the user key. For the set behavior: Set it to delRsaKey(2) to delete the RSA user key, to delDsaKey(3) to delete the DSA user key, or to delBothKeys(4) to delete both RSA and DSA user key. For the get behavior: You will get delRsaKey(2), delDsaKey(3) or delBothKeys(4) when the delete operation is in progress. Otherwise, you will get noDel(1).
| ||||
| SsshRsaHostKeySHA1FingerPrint | 1.3.6.1.4.1.259.6.10.94.1.17.6.30 | DisplayString (SIZE (65)) | RO | |
scalar · DisplayString (SIZE (65)) · read-only · current The SHA1 finger print of the RSA host key. | ||||
| SsshRsaHostKeyMD5FingerPrint | 1.3.6.1.4.1.259.6.10.94.1.17.6.31 | DisplayString (SIZE (47)) | RO | |
scalar · DisplayString (SIZE (47)) · read-only · current The MD5 finger print of RSA host key. | ||||
| SsshDsaHostKeySHA1FingerPrint | 1.3.6.1.4.1.259.6.10.94.1.17.6.32 | DisplayString (SIZE (65)) | RO | |
scalar · DisplayString (SIZE (65)) · read-only · current The SHA1 finger print of the DSA host key. | ||||
| SsshDsaHostKeyMD5FingerPrint | 1.3.6.1.4.1.259.6.10.94.1.17.6.33 | DisplayString (SIZE (47)) | RO | |
scalar · DisplayString (SIZE (47)) · read-only · current The MD5 finger print of the DSA host key. | ||||
| NipFilterMgt | 1.3.6.1.4.1.259.6.10.94.1.17.9 | |||
| TipFilterSnmpTable | 1.3.6.1.4.1.259.6.10.94.1.17.9.1 | NA | ||
table · not-accessible · current A list of IP address entries. | ||||
| RipFilterSnmpEntry | 1.3.6.1.4.1.259.6.10.94.1.17.9.1.1 | NA | ||
row · not-accessible · current This entry includes an IP address range which the system will allow to connect to this device through SNMP. | ||||
| CipFilterSnmpStartAddress | 1.3.6.1.4.1.259.6.10.94.1.17.9.1.1.1 | IpAddress | NA | |
column · IpAddress · not-accessible · current The start IP address. | ||||
| CipFilterSnmpEndAddress | 1.3.6.1.4.1.259.6.10.94.1.17.9.1.1.2 | IpAddress | RC | |
column · IpAddress · read-create · current The end IP address. | ||||
| CipFilterSnmpStatus | 1.3.6.1.4.1.259.6.10.94.1.17.9.1.1.3 | ValidStatus | RC | |
column · ValidStatus · read-create · current Setting this to valid(1) creates an entry. Setting this to invalid(2) destroys an entry. | ||||
| TipFilterHTTPTable | 1.3.6.1.4.1.259.6.10.94.1.17.9.2 | NA | ||
table · not-accessible · current A list of IP address entries. | ||||
| RipFilterHTTPEntry | 1.3.6.1.4.1.259.6.10.94.1.17.9.2.1 | NA | ||
row · not-accessible · current This entry includes an IP address range which the system will allow to connect to this device through SNMP. | ||||
| CipFilterHTTPStartAddress | 1.3.6.1.4.1.259.6.10.94.1.17.9.2.1.1 | IpAddress | NA | |
column · IpAddress · not-accessible · current The start IP address. | ||||
| CipFilterHTTPEndAddress | 1.3.6.1.4.1.259.6.10.94.1.17.9.2.1.2 | IpAddress | RC | |
column · IpAddress · read-create · current The end IP address. | ||||
| CipFilterHTTPStatus | 1.3.6.1.4.1.259.6.10.94.1.17.9.2.1.3 | ValidStatus | RC | |
column · ValidStatus · read-create · current Setting this to valid(1) creates an entry. Setting this to invalid(2) destroys an entry. | ||||
| TipFilterTelnetTable | 1.3.6.1.4.1.259.6.10.94.1.17.9.3 | NA | ||
table · not-accessible · current A list of IP address entries. | ||||
| RipFilterTelnetEntry | 1.3.6.1.4.1.259.6.10.94.1.17.9.3.1 | NA | ||
row · not-accessible · current This entry includes an IP address range which the system will allow them to connect to this device through SNMP. | ||||
| CipFilterTelnetStartAddress | 1.3.6.1.4.1.259.6.10.94.1.17.9.3.1.1 | IpAddress | NA | |
column · IpAddress · not-accessible · current The start IP address. | ||||
| CipFilterTelnetEndAddress | 1.3.6.1.4.1.259.6.10.94.1.17.9.3.1.2 | IpAddress | RC | |
column · IpAddress · read-create · current The end IP address. | ||||
| CipFilterTelnetStatus | 1.3.6.1.4.1.259.6.10.94.1.17.9.3.1.3 | ValidStatus | RC | |
column · ValidStatus · read-create · current Setting this to valid(1) creates an entry. Setting this to invalid(2) destroys an entry. | ||||
| NuserAuthMgt | 1.3.6.1.4.1.259.6.10.94.1.17.10 | |||
| SuserAuthAuthTrapStatus | 1.3.6.1.4.1.259.6.10.94.1.17.10.6 | EnabledStatus | RW | |
scalar · EnabledStatus · read-write · current Indicates whether user authentication failure/success traps should be generated. | ||||
| Ndot1xMgt | 1.3.6.1.4.1.259.6.10.94.1.17.11 | |||
| Tdot1xAuthConfigExtTable | 1.3.6.1.4.1.259.6.10.94.1.17.11.1 | NA | ||
table · not-accessible · current The extension table of dot1xAuthConfigTable. | ||||
| Rdot1xAuthConfigExtEntry | 1.3.6.1.4.1.259.6.10.94.1.17.11.1.1 | NA | ||
| Cdot1xAuthConfigExtOperMode | 1.3.6.1.4.1.259.6.10.94.1.17.11.1.1.1 | INTEGER | RW | |
column · INTEGER · read-write · current The operation mode of dot1x port which allows host connection to 802.1x-authorized ports.
| ||||
| Cdot1xAuthConfigExtMultiHostMaxCnt | 1.3.6.1.4.1.259.6.10.94.1.17.11.1.1.2 | Integer32 (1..1024) | RW | |
column · Integer32 (1..1024) · read-write · current The maximum number of hosts when the dot1xAuthConfigExtOperMode is multiHost(2). When the operation Mode is singleHost(1), we can ignore this variables. | ||||
| Cdot1xAuthConfigExtPortIntrusionAction | 1.3.6.1.4.1.259.6.10.94.1.17.11.1.1.3 | INTEGER | RW | |
column · INTEGER · read-write · current Responses to intrusion when the authentication is failed; block-traffic(1) means that to block traffic when the authentication is failed and guest-vlan(2) means that to join to a guest VLAN when the authentication is failed.
| ||||
| Ndot1xSuppMgt | 1.3.6.1.4.1.259.6.10.94.1.17.11.2 | |||
| Sdot1xSuppUserName | 1.3.6.1.4.1.259.6.10.94.1.17.11.2.1 | DisplayString (SIZE (0..8)) | RW | |
scalar · DisplayString (SIZE (0..8)) · read-write · current The user name that will be sent to Request-Id packects. | ||||
| Sdot1xSuppPassword | 1.3.6.1.4.1.259.6.10.94.1.17.11.2.2 | DisplayString (SIZE (0..8)) | RW | |
scalar · DisplayString (SIZE (0..8)) · read-write · current The password that should be used when replying to a MD5 challenge. | ||||
| Tdot1xSuppConfigPortTable | 1.3.6.1.4.1.259.6.10.94.1.17.11.2.3 | NA | ||
table · not-accessible · current The table of supplicant for port. | ||||
| Rdot1xSuppConfigPortEntry | 1.3.6.1.4.1.259.6.10.94.1.17.11.2.3.1 | NA | ||
| Cdot1xSuppConfigPortIndex | 1.3.6.1.4.1.259.6.10.94.1.17.11.2.3.1.1 | Integer32 | NA | |
column · Integer32 · not-accessible · current The port and the trunk (excluding trunk members) interface of the portTable. The interface identified by a particular value of this port index is the same interface identified by the same value of ifIndex in the IF-MIB. | ||||
| Cdot1xSuppConfigPortStatus | 1.3.6.1.4.1.259.6.10.94.1.17.11.2.3.1.2 | EnabledStatus | RW | |
column · EnabledStatus · read-write · current Set enabled(1) to let the port act as a supplicant and will not respond to messages that are meant for an authenticator. Set disabled(2) to disable supplicant ability of the port. | ||||
| Sdot1xEapolPassThrough | 1.3.6.1.4.1.259.6.10.94.1.17.11.3 | EnabledStatus | RW | |
scalar · EnabledStatus · read-write · current When this variable is enabled(1), EAPOL frames will be forwarded to all ports where the Spanning Tree status is forwarding. When this variable is disabled(2), EAPOL frames will be discarded. EAPOL Pass-Through operates when the global status of 802.1X is disabled. | ||||
| NaaaMgt | 1.3.6.1.4.1.259.6.10.94.1.17.12 | |||
| TaaaMethodTable | 1.3.6.1.4.1.259.6.10.94.1.17.12.1 | NA | ||
table · not-accessible · current Contains the settings needed for accounting. | ||||
| RaaaMethodEntry | 1.3.6.1.4.1.259.6.10.94.1.17.12.1.1 | NA | ||
| CaaaMethodIndex | 1.3.6.1.4.1.259.6.10.94.1.17.12.1.1.1 | Integer32 | NA | |
column · Integer32 · not-accessible · current Specifies the index for the entry. | ||||
| CaaaMethodName | 1.3.6.1.4.1.259.6.10.94.1.17.12.1.1.2 | DisplayString (SIZE (1..255)) | RC | |
column · DisplayString (SIZE (1..255)) · read-create · current Name for the method. | ||||
| CaaaMethodGroupName | 1.3.6.1.4.1.259.6.10.94.1.17.12.1.1.3 | DisplayString (SIZE (1..255)) | RC | |
column · DisplayString (SIZE (1..255)) · read-create · current Name for the server to use, pointing to aaaRadiusGroupName or aaaTacacsPlusGroupName. | ||||
| CaaaMethodMode | 1.3.6.1.4.1.259.6.10.94.1.17.12.1.1.4 | INTEGER | RC | |
column · INTEGER · read-create · current start-stop(1),sends a 'start' accounting notice at the beginning of a process and a 'stop' accounting notice at the end of a process. The 'start' accounting record is sent in the background. The requested user process begins regardless of whether or not the 'start' accounting notice was received by the accounting server.
| ||||
| CaaaMethodStatus | 1.3.6.1.4.1.259.6.10.94.1.17.12.1.1.5 | ValidStatus | RC | |
column · ValidStatus · read-create · current Set to 1 to initiate the aaaMethodTable, 2 to destroy the table. | ||||
| CaaaMethodClientType | 1.3.6.1.4.1.259.6.10.94.1.17.12.1.1.6 | INTEGER | RC | |
column · INTEGER · read-create · current dot1x(1): Provides accounting service for 802.1x activity; exec(2): Provides accounting service for EXEC connection such as Telnet, SSH or console; commands(3): Provides accounting service for command privileges.
| ||||
| CaaaMethodPrivilegeLevel | 1.3.6.1.4.1.259.6.10.94.1.17.12.1.1.7 | INTEGER (0..15) | RC | |
column · INTEGER (0..15) · read-create · current Specifies the privilege level for the entry. When aaaMethodClientType is in the mode of command(3), the privilege level is enabled to be accessed. | ||||
| TaaaRadiusGroupTable | 1.3.6.1.4.1.259.6.10.94.1.17.12.2 | NA | ||
table · not-accessible · current Uses a subset of RADIUS servers for accounting as defined by the server group | ||||
| RaaaRadiusGroupEntry | 1.3.6.1.4.1.259.6.10.94.1.17.12.2.1 | NA | ||
| CaaaRadiusGroupIndex | 1.3.6.1.4.1.259.6.10.94.1.17.12.2.1.1 | Integer32 | NA | |
column · Integer32 · not-accessible · current Specifies the index for the entry. | ||||
| CaaaRadiusGroupServerBitMap | 1.3.6.1.4.1.259.6.10.94.1.17.12.2.1.2 | OCTET STRING (SIZE (1)) | RC | |
column · OCTET STRING (SIZE (1)) · read-create · current Identifies which RADIUS sever to use, each bit points to each radius server. 80 (1000 0000) point to radius server 1, C0 (11000000) points to radius 1 and radius 2. | ||||
| CaaaRadiusGroupName | 1.3.6.1.4.1.259.6.10.94.1.17.12.2.1.3 | DisplayString | RC | |
column · DisplayString · read-create · current Uses a subset of servers for accounting as defined by the server group. The same name as aaaTacasPlusGroupName is not allowed. | ||||
| CaaaRadiusGroupStatus | 1.3.6.1.4.1.259.6.10.94.1.17.12.2.1.4 | ValidStatus | RC | |
column · ValidStatus · read-create · current Set to 1 to initiate the aaaRadiusGroupTable, 2 to destroy the table. | ||||
| TaaaTacacsPlusGroupTable | 1.3.6.1.4.1.259.6.10.94.1.17.12.3 | NA | ||
table · not-accessible · current Uses a subset of TACACS+ servers for accounting as defined by the server group | ||||
| RaaaTacacsPlusGroupEntry | 1.3.6.1.4.1.259.6.10.94.1.17.12.3.1 | NA | ||
row · not-accessible · current A conceptual row of aaaTacacsPlusGroupEntry. | ||||
| CaaaTacacsPlusGroupIndex | 1.3.6.1.4.1.259.6.10.94.1.17.12.3.1.1 | Integer32 | NA | |
column · Integer32 · not-accessible · current Specifies the index for the entry. | ||||
| CaaaTacacsPlusGroupServerBitMap | 1.3.6.1.4.1.259.6.10.94.1.17.12.3.1.2 | OCTET STRING (SIZE (1)) | RC | |
column · OCTET STRING (SIZE (1)) · read-create · current Identifies which TACACS+ sever to use. | ||||
| CaaaTacacsPlusGroupName | 1.3.6.1.4.1.259.6.10.94.1.17.12.3.1.3 | DisplayString | RC | |
column · DisplayString · read-create · current Uses a subset of servers for accounting as defined by the server group. We can't have the same name as aaaRadiusGroupName | ||||
| CaaaTacacsPlusGroupStatus | 1.3.6.1.4.1.259.6.10.94.1.17.12.3.1.4 | ValidStatus | RC | |
column · ValidStatus · read-create · current Set to 1 to initiate the aaaRadiusGroupTable, 2 to destroy the table. | ||||
| SaaaUpdate | 1.3.6.1.4.1.259.6.10.94.1.17.12.4 | Integer32 (1..2147483647) | RW | |
scalar · Integer32 (1..2147483647) · read-write · current Specifies the periodic interim accounting records to be sent to the accounting server and periodic intervals to send accounting update records(in minutes). | ||||
| TaaaAccountTable | 1.3.6.1.4.1.259.6.10.94.1.17.12.5 | NA | ||
table · not-accessible · current Specifies an interface or a set of interfaces that the accounting method list will be applied to. | ||||
| RaaaAccountEntry | 1.3.6.1.4.1.259.6.10.94.1.17.12.5.1 | NA | ||
| CaaaAccountIfIndex | 1.3.6.1.4.1.259.6.10.94.1.17.12.5.1.1 | Integer32 | NA | |
column · Integer32 · not-accessible · current Defined as the ifIndex | ||||
| CaaaAccountMethodName | 1.3.6.1.4.1.259.6.10.94.1.17.12.5.1.2 | DisplayString | RC | |
column · DisplayString · read-create · current Specifies the name of the list of accounting methods to use. If no method name is specified, the system uses the default. | ||||
| CaaaAccountProtocol | 1.3.6.1.4.1.259.6.10.94.1.17.12.5.1.3 | INTEGER | RO | |
column · INTEGER · read-only · current Get the protocol type of a list method to know which server (RADIUS or TACACS+) is in use. | ||||
| CaaaAccountStatus | 1.3.6.1.4.1.259.6.10.94.1.17.12.5.1.4 | ValidStatus | RC | |
column · ValidStatus · read-create · current Set to 1 to initiate the aaaRadiusGroupTable, 2 to destroy the table. | ||||
| TaaaCommandPrivilegesTable | 1.3.6.1.4.1.259.6.10.94.1.17.12.8 | NA | ||
table · not-accessible · current Contains the settings needed for command privileges. | ||||
| RaaaCommandPrivilegesEntry | 1.3.6.1.4.1.259.6.10.94.1.17.12.8.1 | NA | ||
row · not-accessible · current A conceptual row in the aaaCommandPrivilegesTable. | ||||
| CaaaCommandPrivilegesLevel | 1.3.6.1.4.1.259.6.10.94.1.17.12.8.1.1 | INTEGER (0..15) | NA | |
column · INTEGER (0..15) · not-accessible · current Specifies the privilege level index for the entry. | ||||
| CaaaCommandPrivilegesInterfaceIndex | 1.3.6.1.4.1.259.6.10.94.1.17.12.8.1.2 | INTEGER | NA | |
column · INTEGER · not-accessible · current Specifies the interface index for the entry.
| ||||
| CaaaCommandPrivilegesMethodName | 1.3.6.1.4.1.259.6.10.94.1.17.12.8.1.3 | DisplayString (SIZE (1..255)) | RC | |
column · DisplayString (SIZE (1..255)) · read-create · current Specifies the method name in the lists under the mode of command privileges. | ||||
| TaaaAccExecTable | 1.3.6.1.4.1.259.6.10.94.1.17.12.9 | NA | ||
table · not-accessible · current Specifies an interface or a set of interfaces that the accounting method list will be applied to. | ||||
| RaaaAccExecEntry | 1.3.6.1.4.1.259.6.10.94.1.17.12.9.1 | NA | ||
| CaaaAccExecIndex | 1.3.6.1.4.1.259.6.10.94.1.17.12.9.1.1 | INTEGER | NA | |
column · INTEGER · not-accessible · current The method of accessing CLI management.
| ||||
| CaaaAccExecMethodName | 1.3.6.1.4.1.259.6.10.94.1.17.12.9.1.2 | DisplayString | RC | |
column · DisplayString · read-create · current Specifies the name of the list of accounting methods to use. If no method name is specified, the system uses the default. | ||||
| NnetworkAccessMgt | 1.3.6.1.4.1.259.6.10.94.1.17.13 | |||
| TnetworkAccessPortTable | 1.3.6.1.4.1.259.6.10.94.1.17.13.2 | NA | ||
table · not-accessible · current A table contains the information of network access about every port. | ||||
| RnetworkAccessPortEntry | 1.3.6.1.4.1.259.6.10.94.1.17.13.2.1 | NA | ||
row · not-accessible · current A conceptual row in the networkAccessPort table. | ||||
| CnetworkAccessPortPortIndex | 1.3.6.1.4.1.259.6.10.94.1.17.13.2.1.1 | Integer32 | NA | |
column · Integer32 · not-accessible · current The port and the trunk (excluding trunk members) interface of the portTable. The interface identified by a particular value of this port index is the same interface identified by the same value of ifIndex in the IF-MIB. | ||||
| CnetworkAccessPortMaxMacCount | 1.3.6.1.4.1.259.6.10.94.1.17.13.2.1.3 | INTEGER (0..1024) | RW | |
column · INTEGER (0..1024) · read-write · current Specifies the maximum number of authenticated MAC address. | ||||
| CnetworkAccessPortMode | 1.3.6.1.4.1.259.6.10.94.1.17.13.2.1.4 | EnabledStatus | RW | |
column · EnabledStatus · read-write · current Specifies the secure port mode. enabled(1) means that Mac address authentication is used and disabled(2) means that the authentication is disabled. | ||||
| CnetworkAccessPortMacFilter | 1.3.6.1.4.1.259.6.10.94.1.17.13.2.1.5 | INTEGER (0..64) | RW | |
column · INTEGER (0..64) · read-write · current Specifies the MAC filter ID, Set this variable to zero to disable MAC filter. | ||||
| CnetworkAccessPortGuestVlan | 1.3.6.1.4.1.259.6.10.94.1.17.13.2.1.6 | INTEGER (0..4094) | RW | |
column · INTEGER (0..4094) · read-write · current Specifies the guest VLAN ID. To disable the VLAN, set the value to 0. | ||||
| CnetworkAccessPortLinkDetectionStatus | 1.3.6.1.4.1.259.6.10.94.1.17.13.2.1.7 | EnabledStatus | RW | |
column · EnabledStatus · read-write · current Set this object to enabled(1) to enable link detection. Set this object to disabled(2) to disable link detection. | ||||
| CnetworkAccessPortLinkDetectionMode | 1.3.6.1.4.1.259.6.10.94.1.17.13.2.1.8 | INTEGER | RW | |
column · INTEGER · read-write · current Specifies the detection event for a port. Set this object to linkUp(1) to detect a link-up event. Set this object to linkDown(2) to detect a link-down event. Set this object to linkUpDown(3) to detect both link up and link down events.
| ||||
| CnetworkAccessPortLinkDetectionAciton | 1.3.6.1.4.1.259.6.10.94.1.17.13.2.1.9 | INTEGER | RW | |
column · INTEGER · read-write · current Specifies the action to take when a networkAccessPortLinkDetection event is triggered. Set this object to trap(1) to send a trap when a networkAccessPortLinkDetection event is triggered. Set this object to shutDown(2) to shut down the port when a networkAccessPortLinkDetection event is triggered. Set this object to trapAndShutDown(3) to send a trap and shut down the port when a networkAccessPortLinkDetection event is triggered.
| ||||
| CnetworkAccessPortDynamicQos | 1.3.6.1.4.1.259.6.10.94.1.17.13.2.1.10 | EnabledStatus | RW | |
column · EnabledStatus · read-write · current Set this object to enabled(1) to enable Dynamic QoS. Set this object to disabled(2) to disable Dynamic QoS. | ||||
| NnetworkAccessClearMacAddressMgt | 1.3.6.1.4.1.259.6.10.94.1.17.13.3 | |||
| SnetworkAccessClearMacAddressAttribute | 1.3.6.1.4.1.259.6.10.94.1.17.13.3.1 | INTEGER | RW | |
scalar · INTEGER · read-write · current Attribute for clearing Mac address. Specifies the certain attribute in Mac address table. all(1) indicates both reauthorized and learnt secure MAC address; static(2) indicates reauthorized MAC address; dynamic(3) indicates learnt secure MAC address.
| ||||
| SnetworkAccessClearMacAddressMacAddress | 1.3.6.1.4.1.259.6.10.94.1.17.13.3.2 | MacAddress | RW | |
scalar · MacAddress · read-write · current Specifies MAC address in the MAC address table for clearing MAC address. '000000' represents that no MAC address is specified. | ||||
| SnetworkAccessClearMacAddressPort | 1.3.6.1.4.1.259.6.10.94.1.17.13.3.3 | Integer32 | RW | |
scalar · Integer32 · read-write · current The specifies port in the MAC address table for clearing MAC address. '0' represents that no port is specified. | ||||
| SnetworkAccessClearMacAddressAction | 1.3.6.1.4.1.259.6.10.94.1.17.13.3.4 | INTEGER | RW | |
scalar · INTEGER · read-write · current Action for clearing MAC address . When setting this object to clear(2) to begin the clearing MAC address operation, a particular MAC address is cleared from the MAC address table. When the action is finshed whether or not it is successful or no action is taken, the value of this object is always noclear(1).
| ||||
| TnetworkAccessMacAddressTable | 1.3.6.1.4.1.259.6.10.94.1.17.13.4 | NA | ||
table · not-accessible · current Contains the information of network access MAC addresses. | ||||
| RnetworkAccessMacAddressEntry | 1.3.6.1.4.1.259.6.10.94.1.17.13.4.1 | NA | ||
row · not-accessible · current A conceptual row in the networkAccessMacAddress table. | ||||
| CnetworkAccessMacAddressAddress | 1.3.6.1.4.1.259.6.10.94.1.17.13.4.1.1 | MacAddress | NA | |
column · MacAddress · not-accessible · current Specifies the authenticated MAC address. | ||||
| CnetworkAccessMacAddressPort | 1.3.6.1.4.1.259.6.10.94.1.17.13.4.1.2 | INTEGER | NA | |
column · INTEGER · not-accessible · current Specifies the port of authenticated MAC address. | ||||
| CnetworkAccessMacAddressInetAddressType | 1.3.6.1.4.1.259.6.10.94.1.17.13.4.1.3 | InetAddressType | RO | |
column · InetAddressType · read-only · current This object indicates the type of IP address denoted in networkAccessMacAddressRadiusServerInetAddress type. | ||||
| CnetworkAccessMacAddressRadiusServerInetAddress | 1.3.6.1.4.1.259.6.10.94.1.17.13.4.1.4 | InetAddress | RO | |
column · InetAddress · read-only · current Displays the IP address of radius server that authenticates the specified Mac address. | ||||
| CnetworkAccessMacAddressTime | 1.3.6.1.4.1.259.6.10.94.1.17.13.4.1.5 | DisplayString (SIZE (12)) | RO | |
column · DisplayString (SIZE (12)) · read-only · current Displays the authentication time of the authenticated MAC address. The following form is a text string; 'yyyy MMm DDd HHh MMm SSs'. 'yyyy' is a four-digit year. 'MM' is a month. A single-digit month is preceded by a zero. 'DD' is the day of a month. A single-digit day is preceded by the value zero. 'HH', 'MM' and 'SS' are hour, minute, and second respectively. A single-digit hour, minute, and second are preceded by a zero value. An example is: '2001y 01m 01d 00h 04m 43s'. | ||||
| CnetworkAccessMacAddressAttribute | 1.3.6.1.4.1.259.6.10.94.1.17.13.4.1.6 | INTEGER | RO | |
column · INTEGER · read-only · current Displays the attribute of an authenticated MAC address. static(1) indicates resauthorized secure MAC address. dynamic(2) indicates learnt secure MAC address.
| ||||
| SnetworkAccessAging | 1.3.6.1.4.1.259.6.10.94.1.17.13.5 | EnabledStatus | RW | |
scalar · EnabledStatus · read-write · current Set this object to enabled(1) to enable MAC address aging feature. Set this object to disabled(2) to disable MAC address aging feature. | ||||
| TnetworkAccessMacFilterWithMaskTable | 1.3.6.1.4.1.259.6.10.94.1.17.13.6 | NA | ||
table · not-accessible · current Contains the settings for MAC filter. | ||||
| RnetworkAccessMacFilterWithMaskEntry | 1.3.6.1.4.1.259.6.10.94.1.17.13.6.1 | NA | ||
row · not-accessible · current A conceptual row in the networkAccessMacFilterWithMaskTable. | ||||
| CnetworkAccessMacFilterWithMaskID | 1.3.6.1.4.1.259.6.10.94.1.17.13.6.1.1 | INTEGER | NA | |
column · INTEGER · not-accessible · current Specifies the MAC filter ID. | ||||
| CnetworkAccessMacFilterWithMaskMacAddress | 1.3.6.1.4.1.259.6.10.94.1.17.13.6.1.2 | MacAddress | NA | |
column · MacAddress · not-accessible · current Specifies the MAC address to be filtered. | ||||
| CnetworkAccessMacFilterWithMaskMacAddressMask | 1.3.6.1.4.1.259.6.10.94.1.17.13.6.1.3 | MacAddress | NA | |
column · MacAddress · not-accessible · current Specifies the MAC mask to be filtered. | ||||
| CnetworkAccessMacFilterWithMaskStatus | 1.3.6.1.4.1.259.6.10.94.1.17.13.6.1.4 | ValidStatus | RC | |
column · ValidStatus · read-create · current Set this object to valid(1) to create an entry. Set this object to invalid(2) to destroy an entry. | ||||
| NmacAuthMgt | 1.3.6.1.4.1.259.6.10.94.1.17.14 | |||
| SmacAuthReauthTime | 1.3.6.1.4.1.259.6.10.94.1.17.14.1 | Integer32 (120..1000000) | RW | |
scalar · Integer32 (120..1000000) · read-write · current Specifies the reauthentication time period. | ||||
| TmacAuthPortTable | 1.3.6.1.4.1.259.6.10.94.1.17.14.2 | NA | ||
table · not-accessible · current Contains the settings for mac authentication of each port. | ||||
| RmacAuthPortEntry | 1.3.6.1.4.1.259.6.10.94.1.17.14.2.1 | NA | ||
| CmacAuthPortIndex | 1.3.6.1.4.1.259.6.10.94.1.17.14.2.1.1 | Integer32 | NA | |
column · Integer32 · not-accessible · current The port and the trunk (including trunk members) interface of the port table. The interface identified by a particular value of this index is the same interface identified by the same value of ifIndex in the IF-MIB. | ||||
| CmacAuthPortMaxMacCount | 1.3.6.1.4.1.259.6.10.94.1.17.14.2.1.2 | INTEGER (0..1024) | RW | |
column · INTEGER (0..1024) · read-write · current Specifies the maximum number of authenticated MAC addresses for MAC authentication. | ||||
| CmacAuthPortIntrusionAction | 1.3.6.1.4.1.259.6.10.94.1.17.14.2.1.3 | INTEGER | RW | |
column · INTEGER · read-write · current Responses to intrusion when the authentication is failed. block-traffic(1) : denies network access to an unauthorized client; pass-traffic(2) : allows unauthorized clients to the access network.
| ||||
| NwebAuthMgt | 1.3.6.1.4.1.259.6.10.94.1.17.15 | |||
| SwebAuthSystemAuthControl | 1.3.6.1.4.1.259.6.10.94.1.17.15.1 | EnabledStatus | RW | |
scalar · EnabledStatus · read-write · current Sets enabled(1) to enable WebAuth feature and sets disabled(2) to disable WebAuth feature. | ||||
| SwebAuthSessionTimeout | 1.3.6.1.4.1.259.6.10.94.1.17.15.5 | INTEGER (300..3600) | RW | |
scalar · INTEGER (300..3600) · read-write · current For authenticated success users, they can use internet service during a certain period. Whenever this period expires, users need to be re-authenticated again. This period is called session time. | ||||
| SwebAuthQuietPeriod | 1.3.6.1.4.1.259.6.10.94.1.17.15.6 | INTEGER (1..180) | RW | |
scalar · INTEGER (1..180) · read-write · current Specifies the re-authentication interval when the authentication fail attempts reach the webAuthLoginAttempts value. Unauthenticated user won't be authenticated during this period. | ||||
| SwebAuthLoginAttempts | 1.3.6.1.4.1.259.6.10.94.1.17.15.7 | INTEGER (1..3) | RW | |
scalar · INTEGER (1..3) · read-write · current Specifies the counter that configures the authentication fail times for a client. If authentication fail times reaches the specified value, the client are not allowed to login for some period. | ||||
| NwebAuthReauthenticateMgt | 1.3.6.1.4.1.259.6.10.94.1.17.15.8 | |||
| SwebAuthReauthenticatePort | 1.3.6.1.4.1.259.6.10.94.1.17.15.8.1 | INTEGER | RW | |
scalar · INTEGER · read-write · current Specifies the port to re-authenticate for all of its authenticated hosts. | ||||
| SwebAuthReauthenticateInetAddressType | 1.3.6.1.4.1.259.6.10.94.1.17.15.8.2 | InetAddressType | RW | |
scalar · InetAddressType · read-write · current Specifies host type to re-authenticate. | ||||
| SwebAuthReauthenticateInetAddress | 1.3.6.1.4.1.259.6.10.94.1.17.15.8.3 | InetAddress | RW | |
scalar · InetAddress · read-write · current Specificies host to re-authenticate. | ||||
| SwebAuthReauthenticateAction | 1.3.6.1.4.1.259.6.10.94.1.17.15.8.4 | INTEGER | RW | |
scalar · INTEGER · read-write · current Action for WebAuth re-authenication. When setting this object to reauth(2) to begin the re-authenticated operation, a particular user is re-authenticated. When the action is finshed whether it is successfully, or no action is taken, the value of this object is always noReauth(1).
| ||||
| TwebAuthPortConfigTable | 1.3.6.1.4.1.259.6.10.94.1.17.15.9 | NA | ||
table · not-accessible · current Contains the settings for web authentication of each port. | ||||
| RwebAuthPortConfigEntry | 1.3.6.1.4.1.259.6.10.94.1.17.15.9.1 | NA | ||
row · not-accessible · current A conceptual row in the webAuthPortConfigTable. | ||||
| CwebAuthPortConfigPortIndex | 1.3.6.1.4.1.259.6.10.94.1.17.15.9.1.1 | INTEGER | NA | |
column · INTEGER · not-accessible · current The port number of the port that may specify certain entry in the table which contains web authentication information. | ||||
| CwebAuthPortConfigStatus | 1.3.6.1.4.1.259.6.10.94.1.17.15.9.1.2 | EnabledStatus | RW | |
column · EnabledStatus · read-write · current Sets enabled(1) to enable web authentication feature for each port and sets disabled(2) to disable web authentication for each port. | ||||
| CwebAuthPortConfigAuthenticatedHostCount | 1.3.6.1.4.1.259.6.10.94.1.17.15.9.1.3 | INTEGER | RO | |
column · INTEGER · read-only · current Displays the authenticated host counts for each port | ||||
| TwebAuthPortInfoTable | 1.3.6.1.4.1.259.6.10.94.1.17.15.10 | NA | ||
table · not-accessible · current Contains the information for web authentication of each port. | ||||
| RwebAuthPortInfoEntry | 1.3.6.1.4.1.259.6.10.94.1.17.15.10.1 | NA | ||
row · not-accessible · current A conceptual row in the webAuthPortTable. | ||||
| CwebAuthPortInfoPortIndex | 1.3.6.1.4.1.259.6.10.94.1.17.15.10.1.1 | INTEGER | NA | |
column · INTEGER · not-accessible · current The port number for which this entry contains web authentication information. | ||||
| CwebAuthPortInfoPortAuthSuccessIndex | 1.3.6.1.4.1.259.6.10.94.1.17.15.10.1.2 | INTEGER | NA | |
column · INTEGER · not-accessible · current The authentication success number of port for which this entry contains web authentication information. | ||||
| CwebAuthPortInfoInetAddressType | 1.3.6.1.4.1.259.6.10.94.1.17.15.10.1.3 | InetAddressType | RO | |
column · InetAddressType · read-only · current This object indicates the type of IP address denoted in webAuthPortInfoIpAddress type. | ||||
| CwebAuthPortInfoInetAddress | 1.3.6.1.4.1.259.6.10.94.1.17.15.10.1.4 | InetAddress | RO | |
column · InetAddress · read-only · current The IP address which may specify the entry containing web authentication information. | ||||
| CwebAuthPortInfoRemainingSessiontime | 1.3.6.1.4.1.259.6.10.94.1.17.15.10.1.5 | INTEGER | RO | |
column · INTEGER · read-only · current The remaining session time for authenticated hosts. During this period, they may use internet resource. When the session time expires, they will need to re-authenticate again. | ||||
| CwebAuthPortInfoStatus | 1.3.6.1.4.1.259.6.10.94.1.17.15.10.1.6 | INTEGER | RO | |
column · INTEGER · read-only · current Displays the web authentication status for each port. authenticated (1) means the user is authenticated.
| ||||
| NsysLogMgt | 1.3.6.1.4.1.259.6.10.94.1.19 | |||
| SsysLogStatus | 1.3.6.1.4.1.259.6.10.94.1.19.1 | EnabledStatus | RW | |
scalar · EnabledStatus · read-write · current Whether the system log is enabled. | ||||
| SsysLogHistoryFlashLevel | 1.3.6.1.4.1.259.6.10.94.1.19.2 | Integer32 (0..7) | RW | |
scalar · Integer32 (0..7) · read-write · current Severity level for logging to flash. | ||||
| SsysLogHistoryRamLevel | 1.3.6.1.4.1.259.6.10.94.1.19.3 | Integer32 (0..7) | RW | |
scalar · Integer32 (0..7) · read-write · current Severity level for logging to RAM. | ||||
| NremoteLogMgt | 1.3.6.1.4.1.259.6.10.94.1.19.6 | |||
| SremoteLogStatus | 1.3.6.1.4.1.259.6.10.94.1.19.6.1 | EnabledStatus | RW | |
scalar · EnabledStatus · read-write · current Whether the remote log system is enabled. | ||||
| SremoteLogLevel | 1.3.6.1.4.1.259.6.10.94.1.19.6.2 | Integer32 (0..7) | RW | |
scalar · Integer32 (0..7) · read-write · current Severity level for remote log. | ||||
| SremoteLogFacilityType | 1.3.6.1.4.1.259.6.10.94.1.19.6.3 | INTEGER | RW | |
scalar · INTEGER · read-write · current The facility type for remote log.
| ||||
| TremoteLogServerTable | 1.3.6.1.4.1.259.6.10.94.1.19.6.4 | NA | ||
table · not-accessible · current A Table for storing the remote log Server list. | ||||
| RremoteLogServerEntry | 1.3.6.1.4.1.259.6.10.94.1.19.6.4.1 | NA | ||
| CremoteLogServerIp | 1.3.6.1.4.1.259.6.10.94.1.19.6.4.1.1 | IpAddress | NA | |
column · IpAddress · not-accessible · current The IP address of the remote log Server. | ||||
| CremoteLogServerStatus | 1.3.6.1.4.1.259.6.10.94.1.19.6.4.1.2 | ValidStatus | RC | |
column · ValidStatus · read-create · current Setting this to valid(1) creates an entry. Setting this to invalid(2) destroys an entry. | ||||
| NsmtpMgt | 1.3.6.1.4.1.259.6.10.94.1.19.7 | |||
| SsmtpStatus | 1.3.6.1.4.1.259.6.10.94.1.19.7.1 | EnabledStatus | RW | |
scalar · EnabledStatus · read-write · current Set enabled(1) to enable the SMTP, set disabled(2) to disable the SMTP. | ||||
| SsmtpSeverityLevel | 1.3.6.1.4.1.259.6.10.94.1.19.7.2 | Integer32 (0..7) | RW | |
scalar · Integer32 (0..7) · read-write · current Specify the SMTP minimum severity level to send the event message. | ||||
| SsmtpSourceEMail | 1.3.6.1.4.1.259.6.10.94.1.19.7.3 | DisplayString (SIZE (0..41)) | RW | |
scalar · DisplayString (SIZE (0..41)) · read-write · current SMTP source email address, the sender's mail address that appears in the 'From' field of the mail. | ||||
| TsmtpServerIpTable | 1.3.6.1.4.1.259.6.10.94.1.19.7.4 | NA | ||
table · not-accessible · current The SMTP server IP table. The maximum servers to be added is 3. | ||||
| RsmtpServerIpEntry | 1.3.6.1.4.1.259.6.10.94.1.19.7.4.1 | NA | ||
| CsmtpServerIp | 1.3.6.1.4.1.259.6.10.94.1.19.7.4.1.1 | IpAddress | AN | |
column · IpAddress · accessible-for-notify · current SMTP mail server's IP address. | ||||
| CsmtpServerIpStatus | 1.3.6.1.4.1.259.6.10.94.1.19.7.4.1.2 | ValidStatus | RC | |
column · ValidStatus · read-create · current Setting this to valid(1) creates an entry. Setting this to invalid(2) destroys an entry. | ||||
| TsmtpDestEMailTable | 1.3.6.1.4.1.259.6.10.94.1.19.7.5 | NA | ||
table · not-accessible · current The table of the destination e-mail address. The maximum numbers of destination email address to be added is 5. | ||||
| RsmtpDestEMailEntry | 1.3.6.1.4.1.259.6.10.94.1.19.7.5.1 | NA | ||
| CsmtpDestEMail | 1.3.6.1.4.1.259.6.10.94.1.19.7.5.1.1 | DisplayString (SIZE (0..41)) | NA | |
column · DisplayString (SIZE (0..41)) · not-accessible · current SMTP destination e-mail address. | ||||
| CsmtpDestEMailStatus | 1.3.6.1.4.1.259.6.10.94.1.19.7.5.1.2 | ValidStatus | RC | |
column · ValidStatus · read-create · current Setting this to valid(1) creates an entry. Setting this to invalid(2) destroys an entry. | ||||
| NlineMgt | 1.3.6.1.4.1.259.6.10.94.1.20 | |||
| NconsoleMgt | 1.3.6.1.4.1.259.6.10.94.1.20.1 | |||
| SconsoleDataBits | 1.3.6.1.4.1.259.6.10.94.1.20.1.1 | INTEGER | RW | |
scalar · INTEGER · read-write · current Number of data bits.
| ||||
| SconsoleParity | 1.3.6.1.4.1.259.6.10.94.1.20.1.2 | INTEGER | RW | |
scalar · INTEGER · read-write · current Defines the generation of a parity bit.
| ||||
| SconsoleStopBits | 1.3.6.1.4.1.259.6.10.94.1.20.1.4 | INTEGER | RW | |
scalar · INTEGER · read-write · current The console stop bits, valid values are stopbits1(1) or stopbits2(2)
| ||||
| SconsoleExecTimeout | 1.3.6.1.4.1.259.6.10.94.1.20.1.5 | Integer32 (0..65535) | RW | |
scalar · Integer32 (0..65535) · read-write · current In a serial console, use the consoleExecTimeout variable to set the interval that the EXEC command interpreter waits until user input is detected; set the value to 0 to disable it. | ||||
| SconsolePasswordThreshold | 1.3.6.1.4.1.259.6.10.94.1.20.1.6 | Integer32 (0..120) | RW | |
scalar · Integer32 (0..120) · read-write · current The number of failed console logon attempts that may be made before the system will not accept a further attempt in the time specified by consoleSilentTime. A value of 0 disables the functionality. | ||||
| SconsoleSilentTime | 1.3.6.1.4.1.259.6.10.94.1.20.1.7 | Integer32 (0..65535) | RW | |
scalar · Integer32 (0..65535) · read-write · current The length of time that the management console is inaccessible after the number of failed logon attempts has reached consolePasswordThreshold. A value of 0 disables the functionality. | ||||
| SconsoleAdminBaudRate | 1.3.6.1.4.1.259.6.10.94.1.20.1.8 | Integer32 | RW | |
scalar · Integer32 · read-write · current Baud rate. Valid values are 2400, 4800, 9600, 19200, 38400, 57600, 115200. Setting this variable to 0 means autobaud. Please read the actual baud rate in the consoleOperBaudRate variable. | ||||
| SconsoleOperBaudRate | 1.3.6.1.4.1.259.6.10.94.1.20.1.9 | Integer32 | RO | |
scalar · Integer32 · read-only · current The baud rate currently in use. | ||||
| SconsoleLoginResponseTimeout | 1.3.6.1.4.1.259.6.10.94.1.20.1.10 | Integer32 (0..300) | RW | |
scalar · Integer32 (0..300) · read-write · current Console login response timeout setting. Valid range is 0 to 300. Setting to 0 means disabled. | ||||
| NtelnetMgt | 1.3.6.1.4.1.259.6.10.94.1.20.2 | |||
| StelnetExecTimeout | 1.3.6.1.4.1.259.6.10.94.1.20.2.1 | Integer32 (1..65535) | RW | |
scalar · Integer32 (1..65535) · read-write · current Specifies the interval that the system waits for user input before terminating the current telnet session. | ||||
| StelnetPasswordThreshold | 1.3.6.1.4.1.259.6.10.94.1.20.2.2 | Integer32 (0..120) | RW | |
scalar · Integer32 (0..120) · read-write · current The number of failed telnet logon attempts that may be made before the system will not accept a further attempt to logon with telnet. | ||||
| StelnetLoginResponseTimeout | 1.3.6.1.4.1.259.6.10.94.1.20.2.3 | Integer32 (1..300) | RW | |
scalar · Integer32 (1..300) · read-write · current Telnet login response timeout setting. Valid range is 1 to 300. This timout setting cannot be disbled. | ||||
| StelnetStatus | 1.3.6.1.4.1.259.6.10.94.1.20.2.4 | EnabledStatus | RW | |
scalar · EnabledStatus · read-write · current To enable or disable the telnet function. Any new telnet request will be rejected and all current telnet sessions will be terminated if this status is set to disabled(2). | ||||
| StelnetPortNumber | 1.3.6.1.4.1.259.6.10.94.1.20.2.5 | Integer32 (1..65535) | RW | |
scalar · Integer32 (1..65535) · read-write · current The telnet session port number. | ||||
| NsysTimeMgt | 1.3.6.1.4.1.259.6.10.94.1.23 | |||
| NsntpMgt | 1.3.6.1.4.1.259.6.10.94.1.23.1 | |||
| SsntpStatus | 1.3.6.1.4.1.259.6.10.94.1.23.1.1 | EnabledStatus | RW | |
scalar · EnabledStatus · read-write · current Set enabled(1) to enable the SNTP, set disabled(2) to disable the SNTP. | ||||
| SsntpServiceMode | 1.3.6.1.4.1.259.6.10.94.1.23.1.2 | INTEGER | RW | |
scalar · INTEGER · read-write · current Service mode.
| ||||
| SsntpPollInterval | 1.3.6.1.4.1.259.6.10.94.1.23.1.3 | Integer32 (16..16384) | RW | |
scalar · Integer32 (16..16384) · read-write · current Polling interval. | ||||
| TsntpServerTable | 1.3.6.1.4.1.259.6.10.94.1.23.1.4 | NA | ||
table · not-accessible · current Table for SNTP servers | ||||
| RsntpServerEntry | 1.3.6.1.4.1.259.6.10.94.1.23.1.4.1 | NA | ||
| CsntpServerIndex | 1.3.6.1.4.1.259.6.10.94.1.23.1.4.1.1 | Integer32 (1..3) | NA | |
column · Integer32 (1..3) · not-accessible · current The index of a server. This table has fixed size. | ||||
| CsntpServerIpAddress | 1.3.6.1.4.1.259.6.10.94.1.23.1.4.1.2 | IpAddress | RW | |
column · IpAddress · read-write · current The IP address of a server. Valid IP addresses must occupy contiguous indexes. All IP addresses after the last valid index are 0. | ||||
| SsysCurrentTime | 1.3.6.1.4.1.259.6.10.94.1.23.2 | DisplayString (SIZE (20)) | RW | |
scalar · DisplayString (SIZE (20)) · read-write · current This is a text string in the following form, based on Unix: 'Mmm _d hh:mm:ss yyyy'. 'Mmm' are the first three letters of the English name of the month. '_d' is the day of month. A single-digit day is preceded by a space. 'hh:mm:ss' is a 24-hour representations of hours, minutes, and seconds. A single-digit hour is preceded by a zero. 'yyyy' is a four-digit year. An example is: 'Jan 1 02:03:04 2002'. | ||||
| SsysTimeZone | 1.3.6.1.4.1.259.6.10.94.1.23.3 | DisplayString (SIZE (6)) | RW | |
scalar · DisplayString (SIZE (6)) · read-write · current This is a text string in the following form: '[s]hh:mm'. '[s]' is a plus-or-minus sign. For UTC, this is omitted. For a positive offset, this is '+'. For a negative offset, this is '-'. 'hh:mm' in the hour and minute offset from UTC. A single-digit hour is preceded by a zero. When sysTimeZonePredefined object is set to any value other than none(1), this object will be empty string. | ||||
| SsysTimeZoneName | 1.3.6.1.4.1.259.6.10.94.1.23.4 | DisplayString (SIZE (1..30)) | RW | |
scalar · DisplayString (SIZE (1..30)) · read-write · current The name of the time zone. When sysTimeZonePredefined object is set to any value other than none(1), this object will be empty string. | ||||
| NntpMgt | 1.3.6.1.4.1.259.6.10.94.1.23.5 | |||
| SntpStatus | 1.3.6.1.4.1.259.6.10.94.1.23.5.1 | EnabledStatus | RW | |
scalar · EnabledStatus · read-write · current Set enabled(1) to enable the NTP, set disabled(2) to disable the NTP. | ||||
| SntpServiceMode | 1.3.6.1.4.1.259.6.10.94.1.23.5.2 | INTEGER | RW | |
scalar · INTEGER · read-write · current Service mode.
| ||||
| SntpPollInterval | 1.3.6.1.4.1.259.6.10.94.1.23.5.3 | Integer32 | RO | |
scalar · Integer32 · read-only · current Polling interval in seconds. | ||||
| SntpAuthenticateStatus | 1.3.6.1.4.1.259.6.10.94.1.23.5.4 | EnabledStatus | RW | |
scalar · EnabledStatus · read-write · current Set enabled(1) to enable the NTP Authenticate, set disabled(2) to disable the NTP. | ||||
| TntpServerTable | 1.3.6.1.4.1.259.6.10.94.1.23.5.5 | NA | ||
table · not-accessible · current Table for NTP servers | ||||
| RntpServerEntry | 1.3.6.1.4.1.259.6.10.94.1.23.5.5.1 | NA | ||
| CntpServerIpAddress | 1.3.6.1.4.1.259.6.10.94.1.23.5.5.1.1 | IpAddress | NA | |
column · IpAddress · not-accessible · current The IP address of a server. Valid IP addresses must occupy contiguous indexes. All IP addresses after the last valid index is 0. | ||||
| CntpServerVersion | 1.3.6.1.4.1.259.6.10.94.1.23.5.5.1.2 | Integer32 | RO | |
column · Integer32 · read-only · current NTP version. | ||||
| CntpServerKeyId | 1.3.6.1.4.1.259.6.10.94.1.23.5.5.1.3 | Integer32 (1..65535) | RW | |
column · Integer32 (1..65535) · read-write · current Key for a NTP server. This variable can only be written. | ||||
| CntpServerStatus | 1.3.6.1.4.1.259.6.10.94.1.23.5.5.1.4 | INTEGER | RC | |
column · INTEGER · read-create · current The status of this conceptual row entry. This object isused to manage the creation and deletion of conceptual rows. The status column has six defined values: - 'active', which indicates that the conceptual row is available for use by the managed device; - 'create', which is supplied by a management station wishing to create a new instance of a conceptual row and to have its status automatically set to active, making it available for use by the managed device; - 'destroy', which is supplied by a management station wishing to delete all of the instances associated with an existing conceptual row.
| ||||
| TntpAuthKeyTable | 1.3.6.1.4.1.259.6.10.94.1.23.5.6 | NA | ||
table · not-accessible · current Table for NTP Authentication keys | ||||
| RntpAuthKeyEntry | 1.3.6.1.4.1.259.6.10.94.1.23.5.6.1 | NA | ||
| CntpAuthKeyId | 1.3.6.1.4.1.259.6.10.94.1.23.5.6.1.1 | Integer32 (1..65536) | NA | |
column · Integer32 (1..65536) · not-accessible · current The index of a Authentication key. This table has fixed size. | ||||
| CntpAuthKeyWord | 1.3.6.1.4.1.259.6.10.94.1.23.5.6.1.2 | OCTET STRING (SIZE (1..32)) | RC | |
column · OCTET STRING (SIZE (1..32)) · read-create · current The Authentication key word is used to created a key by the MD5 And the max length is 32. | ||||
| CntpAuthKeyStatus | 1.3.6.1.4.1.259.6.10.94.1.23.5.6.1.3 | INTEGER | RC | |
column · INTEGER · read-create · current The status of this conceptual row entry. This object isused to manage the
creation and deletion of conceptual rows.
The status column has six defined values:
- 'active', which indicates that the conceptual row is
available for use by the managed device;
- 'create', which is supplied by a management
station wishing to create a new instance of a
conceptual row and to have its status automatically set
to active, making it available for use by the managed
device;
- 'destroy', which is supplied by a management station
wishing to delete all of the instances associated with
an existing conceptual row.
| ||||
| SsysTimeZonePredefined | 1.3.6.1.4.1.259.6.10.94.1.23.6 | INTEGER | RW | |
scalar · INTEGER · read-write · current Specifies the time zone predefined mode. If time zone is configured by sysTimeZone object, the value field will be none(1). When this variable is set to any value other than none(1), sysTimeZone and sysTimeZoneName will become empty strings. This object can be set to none(1) only when it is already equal to none(1).
| ||||
| NsysSummerTimeMgt | 1.3.6.1.4.1.259.6.10.94.1.23.7 | |||
| SsysSummerTimeZoneName | 1.3.6.1.4.1.259.6.10.94.1.23.7.1 | DisplayString (SIZE (0..30)) | RW | |
scalar · DisplayString (SIZE (0..30)) · read-write · current The name of the summer time zone. If sysSummerTimeMode is disabled, empty string will be shown. | ||||
| SsysSummerTimeMode | 1.3.6.1.4.1.259.6.10.94.1.23.7.2 | INTEGER | RW | |
scalar · INTEGER · read-write · current The mode of the summer time.
| ||||
| SsysSummerTimeRecurringTime | 1.3.6.1.4.1.259.6.10.94.1.23.7.3 | DisplayString (SIZE (37)) | RW | |
scalar · DisplayString (SIZE (37)) · read-write · current This is a text string in the following form, based on Unix: 'www Ddd Mmm hh:mm - www Ddd Mmm hh:mm'. 'www' is the week number of the month. The range of 'www' is 1 to 5. The 5th week is the last week of the month. 'Ddd' are the first three letters of day of the week. 'Mmm' are the first three letters of the month. 'hh:mm' is a 24-hour representation of hours and minutes. A single-digit hour or minute is preceded by a zero. An example is: '1st Sun Jul 00:00 - 4th Sun Oct 00:00'. When sysSummerTimeMode is recurring(2), the object can be modified. Empty string will be shown when sysSummerTimeMode is not recurring(2). | ||||
| SsysSummerTimeDateTime | 1.3.6.1.4.1.259.6.10.94.1.23.7.4 | DisplayString (SIZE (37)) | RW | |
scalar · DisplayString (SIZE (37)) · read-write · current This is a text string in the following form, based on Unix: 'Mmm _d yyyy hh:mm - Mmm _d yyyy hh:mm'. 'Mmm' are the first three letters of the month. '_d' is the day of month. A single-digit day is preceded by a space. 'yyyy' is a four-digit year. The range is from 2001 to 2100. 'hh:mm' is a 24-hour representation of hours and minutes. A single-digit hour or minute is preceded by a zero. An example is: 'Jul 1 2002 00:00 - Oct 1 2002 00:00'. When sysSummerTimeMode is date(3), the object can be modified. Empty string will be shown when sysSummerTimeMode is not date(3). | ||||
| SsysSummerTimePredefinedRegion | 1.3.6.1.4.1.259.6.10.94.1.23.7.5 | INTEGER | RW | |
scalar · INTEGER · read-write · current The region of the summer time predefined mode. The offset of predefined mode is 60 minutes. When sysSummerTimeMode is predefined(4), the object can be modified. When sysSummerTimeMode is not predefined(4), none(1) will be shown. This object can be set to none(1) only when it is already equal to none(1).
| ||||
| SsysSummerTimeOffset | 1.3.6.1.4.1.259.6.10.94.1.23.7.6 | Integer32 (0..99) | RW | |
scalar · Integer32 (0..99) · read-write · current Specifies the number of minutes to add during summer time. When sysSummerTimeMode is recurring(2) or date(3), offset time can be modified. Zero will be shown when sysSummerTimeMode is disabled(1). This object can only be set to zero when sysSummerTimeMode is disabled(1). This object can only be set to 60 when sysSummerTimeMode is predefined(4). | ||||
| SsysSummerTimeEffect | 1.3.6.1.4.1.259.6.10.94.1.23.7.7 | TruthValue | RO | |
scalar · TruthValue · read-only · current This flag indicates whether summer time is in effect. A value of true(1) indicates summer time is in effect. A value of false(2) indicates summer time is not in effect. | ||||
| NfileMgt | 1.3.6.1.4.1.259.6.10.94.1.24 | |||
| NfileCopyMgt | 1.3.6.1.4.1.259.6.10.94.1.24.1 | |||
| SfileCopySrcOperType | 1.3.6.1.4.1.259.6.10.94.1.24.1.1 | INTEGER | RW | |
scalar · INTEGER · read-write · current The Copy Operation that we want to perform on the fileCopyDestOperType, this operation is similar to the CLI command 'copy fileCopySrcOperType fileCopyDestOperType'. file(1) means we want to perform the 'copy file fileCopyDestType' operation, runningCfg(2) means we want to perform the 'copy running-config fileCopyDestOperType' operation, startUpCfg(3) means we want to perform the 'copy startup-config fileCopyDestOperType' operation, tftp(4) means we want to perform the 'copy tftp fileCopyDestOperType' operation, unit(5) is only available in stacking systems, in which we can copy files from one unit to another unit and it means we want to perform the 'copy unit fileCopyDestOperType' operation. http(6) means we can read the status of the transfer via HTTP protocol, but can not change the status. ftp(7) means we want to perform 'copy ftp fileCopyDestOperType' operation. The possible permutations are as follows: (1) copy file file; (2) copy file runningCfg; (3) copy file startUpCfg; (4) copy file tftp; (5) copy file unit (for stacking systems only); (6) copy runningCfg file; (7) copy runningCfg startUpCfg; (8) copy runningCfg tftp; (9) copy startupCfg file; (10) copy startupCfg runningCfg; (11)copy startupCfg tftp; (12) copy tftp file; (13) copy tftp runningCfg; (14) copy tftp startUpCfg; (15) copy unit file; (16) copy file ftp; (17) copy running-config ftp; (18) copy startup-config ftp; (19) copy ftp file; (20) copy ftp running-config; (21) copy ftp startup-config; (22) copy tftp add-to-running-config; (23) copy ftp add-to-running-config;
| ||||
| SfileCopySrcFileName | 1.3.6.1.4.1.259.6.10.94.1.24.1.2 | DisplayString (SIZE (0..127)) | RW | |
scalar · DisplayString (SIZE (0..127)) · read-write · current The source file name for fileCopyMgt when a copy operation is next requested via this MIB. This value is set to a zero length string when no file name has been specified. Note: If the fileCopySrcOperType is runningCfg(2) or startUpCfg(3), this variable can be ignored. | ||||
| SfileCopyDestOperType | 1.3.6.1.4.1.259.6.10.94.1.24.1.3 | INTEGER | RW | |
scalar · INTEGER · read-write · current The Copy Operation that we want to perform on fileCopySrcOperType, this operation is similar to the CLI command 'copy fileCopySrcOperType fileCopyDestOperType'. file(1) means we want to perform the 'copy fileCopySrcType file ' operation, runningCfg(2) means we want to perform the 'copy fileCopySrcOperType running-config ' operation, startUpCfg(3) means we want to perform the 'copy fileCopySrcOperType startup-config ' operation, tftp(4) means we want to perform the 'copy fileCopySrcOperType tftp' operation, unit(5) is only available in stacking systems in which we can copy files from one unit to another unit. It means we want to perform the 'copy fileCopySrcOperType unit' operation. http(6) means we can read the status of the transfer via HTTP protocol, but can not change the status. ftp(7) means we want to perform 'copy fileCopySrcOperType ftp' operation.addRunningCfg(10) means we want to perform 'copy fileCopySrcOperType add-to-running-config' The possible permutations are as follows: (1) copy file file; (2) copy file runningCfg; (3) copy file startUpCfg; (4) copy file tftp; (5) copy file unit (for stacking system only); (6) copy runningCfg file; (7) copy runningCfg startUpCfg; (8) copy runningCfg tftp; (9) copy startupCfg file; (10) copy startupCfg runningCfg; (11) copy startupCfg tftp; (12) copy tftp file; (13) copy tftp runningCfg; (14) copy tftp startUpCfg; (15) copy unit file; (16) copy file ftp; (17) copy running-config ftp; (18) copy startup-config ftp; (19) copy ftp file; (20) copy ftp running-config; (21) copy ftp startup-config; (22) copy tftp add-to-running-config; (23) copy ftp add-to-running-config;
| ||||
| SfileCopyDestFileName | 1.3.6.1.4.1.259.6.10.94.1.24.1.4 | DisplayString (SIZE (0..127)) | RW | |
scalar · DisplayString (SIZE (0..127)) · read-write · current The destination file name for fileCopyMgt when a copy operation is next requested via this MIB. This value is set to a zero length string when no file name has been specified. Note: If the fileCopyDestOperType is runningCfg(2) or startupCfg(3), this variable can be ignored. | ||||
| SfileCopyFileType | 1.3.6.1.4.1.259.6.10.94.1.24.1.5 | INTEGER | RW | |
scalar · INTEGER · read-write · current Type of file to copy in fileCopyMgt. opcode(1) indicates operation code, config(2) indicates configuration file, bootRom(3) indicates diagnostic image file and loader(5) indicates loader image file. If the fileCopySrcOperType or fileCopyDestOperType is either runningCfg(2) or startupCfg(3), this variable can be ignored. bootRom(3) and loader(5) can be set only when the fileCopySrcOperType is tftp(4) and fileCopyDestOperType is file(1).
| ||||
| SfileCopyTftpServer | 1.3.6.1.4.1.259.6.10.94.1.24.1.6 | IpAddress | RW | |
scalar · IpAddress · read-write · current The IP address of the TFTP server for transfer when a download is next requested via this MIB. This value is set to '0.0.0.0' when no IP address has been specified. If neither fileCopySrcOperType nor fileCopyDestOperType is tftp(4), this variable can be ignored. | ||||
| SfileCopyUnitId | 1.3.6.1.4.1.259.6.10.94.1.24.1.7 | Integer32 | RW | |
scalar · Integer32 · read-write · current Specifies the switch unit for stackable devices.
When performing the 'copy unit file' or 'copy file unit' action,
if neither fileCopySrcOperType nor fileCopyDestOperType
is unit(5), this variable can be ignored. | ||||
| SfileCopyAction | 1.3.6.1.4.1.259.6.10.94.1.24.1.8 | INTEGER | RW | |
scalar · INTEGER · read-write · current Setting this object to copy(2) to begin the copy operation. When the device is not copying, this object will have a value of notCopying(1).
| ||||
| SfileCopyStatus | 1.3.6.1.4.1.259.6.10.94.1.24.1.9 | FileCopyStatus | RO | |
scalar · FileCopyStatus · read-only · current The status of the last copy procedure, if any. This object will have a value of fileCopyUnknown(18) if no copy operation has been performed. | ||||
| SfileCopyFtpLoginUsername | 1.3.6.1.4.1.259.6.10.94.1.24.1.12 | DisplayString (SIZE (1..32)) | RW | |
scalar · DisplayString (SIZE (1..32)) · read-write · current Login username of the FTP server. If neither fileCopySrcOperType nor fileCopyDestOperType is ftp(7), this variable can be ignored. | ||||
| SfileCopyFtpLoginPassword | 1.3.6.1.4.1.259.6.10.94.1.24.1.13 | DisplayString (SIZE (0..32)) | RW | |
scalar · DisplayString (SIZE (0..32)) · read-write · current Login password of the FTP server. If neither fileCopySrcOperType nor fileCopyDestOperType is ftp(7), this variable can be ignored. This variable can only be written. When this variable is read, it always returns a zero-length string. | ||||
| NfileInfoMgt | 1.3.6.1.4.1.259.6.10.94.1.24.2 | |||
| TfileInfoTable | 1.3.6.1.4.1.259.6.10.94.1.24.2.1 | NA | ||
table · not-accessible · current This table contain the information of the file system; we can also perform the delete, set startup file operation. | ||||
| RfileInfoEntry | 1.3.6.1.4.1.259.6.10.94.1.24.2.1.1 | NA | ||
row · not-accessible · current A conceptually row for fileInfoTable. | ||||
| CfileInfoUnitID | 1.3.6.1.4.1.259.6.10.94.1.24.2.1.1.1 | Integer32 | NA | |
column · Integer32 · not-accessible · current The switch unit in a stacking system, in a non-stacking system, this value is always 1. | ||||
| CfileInfoFileName | 1.3.6.1.4.1.259.6.10.94.1.24.2.1.1.2 | DisplayString (SIZE (1..32)) | NA | |
column · DisplayString (SIZE (1..32)) · not-accessible · current The file Name of the file System in the device. | ||||
| CfileInfoFileType | 1.3.6.1.4.1.259.6.10.94.1.24.2.1.1.3 | INTEGER | RO | |
column · INTEGER · read-only · current The file type of the file System in the device.
| ||||
| CfileInfoIsStartUp | 1.3.6.1.4.1.259.6.10.94.1.24.2.1.1.4 | TruthValue | RW | |
column · TruthValue · read-write · current This flag indicate whether this file is a startup file. Set this object to true(1) to indicate that this is a startup file. Setting this object to false(2) is a invalid operation. | ||||
| CfileInfoFileSize | 1.3.6.1.4.1.259.6.10.94.1.24.2.1.1.5 | Integer32 | RO | |
column · Integer32 · read-only · current The sizes( in bytes) of the file.
| ||||
| CfileInfoCreationTime | 1.3.6.1.4.1.259.6.10.94.1.24.2.1.1.6 | DisplayString (SIZE (20)) | RO | |
column · DisplayString (SIZE (20)) · read-only · current The creation time of the file, This is a text string in the following form, based on Unix: 'Mmm _d hh:mm:ss yyyy'. 'Mmm' are the first three letters of the English name of the month. '_d' is the day of month. A single-digit day is preceded by a space. 'hh:mm:ss' is a 24-hour representations of hours, minutes, and seconds. A single-digit hour is preceded by a zero. 'yyyy' is the four-digit year. An example is: 'Jan 1 02:03:04 2002'. | ||||
| CfileInfoDelete | 1.3.6.1.4.1.259.6.10.94.1.24.2.1.1.7 | INTEGER | RW | |
column · INTEGER · read-write · current Write this object to delete(2) to delete a file, when read, this always return noDelete(1).
| ||||
| TfileAutoDownloadResultTable | 1.3.6.1.4.1.259.6.10.94.1.24.3 | NA | ||
table · not-accessible · current This table contains file auto download result information. | ||||
| RfileAutoDownloadResultEntry | 1.3.6.1.4.1.259.6.10.94.1.24.3.1 | NA | ||
row · not-accessible · current A conceptual row for fileAutoDownloadResultTable. | ||||
| CfileAutoDownloadResultUnitID | 1.3.6.1.4.1.259.6.10.94.1.24.3.1.1 | Integer32 | NA | |
column · Integer32 · not-accessible · current The switch unit in a stacking system, in a non-stacking system, this value is always 1. | ||||
| CfileAutoDownloadResultAction | 1.3.6.1.4.1.259.6.10.94.1.24.3.1.2 | INTEGER | RO | |
column · INTEGER · read-only · current The status of the auto download action. value copying(2) will be obtained if the auto download action is currently processing, or value notCopying(1) will be obtained if no auto download action is currently processing. You can check the download result through the fileAutoDownloadResultStatus object after the download action has finished. Please note that this object is read-only, since the auto download action is triggered automatically by the system when an image file or a config file is set as startup setting through the fileInfoIsStartUp, restartOpCodeFile or restartConfigFile objects, but not set by the user manually through this fileAutoDownloadResultAction object.
| ||||
| CfileAutoDownloadResultStatus | 1.3.6.1.4.1.259.6.10.94.1.24.3.1.3 | FileCopyStatus | RO | |
column · FileCopyStatus · read-only · current The last auto download result status. value fileCopyUnknown(18) will be obtained if no download action has been performed before. | ||||
| NfileAutoUpgradeMgt | 1.3.6.1.4.1.259.6.10.94.1.24.4 | |||
| SfileAutoUpgradeOpCodeStatus | 1.3.6.1.4.1.259.6.10.94.1.24.4.1 | EnabledStatus | RW | |
scalar · EnabledStatus · read-write · current Set this variable to enabled(1) to enable the device to automatically upgrade the current software image when a new version is detected. Set this variable to disabled(2) to disable this feature. | ||||
| SfileAutoUpgradeOpCodePath | 1.3.6.1.4.1.259.6.10.94.1.24.4.2 | DisplayString (SIZE (0..255)) | RW | |
scalar · DisplayString (SIZE (0..255)) · read-write · current The URL (Universal Resource Location) of the image file location for automatic upgrades. The URL schema can be set to TFTP or FTP. The Hostname is the IP address of the server. The last character of the URL is always a '/' and the filename must not be included in the URL. | ||||
| SfileAutoUpgradeOpCodeFileName | 1.3.6.1.4.1.259.6.10.94.1.24.4.3 | DisplayString (SIZE (0..127)) | RO | |
scalar · DisplayString (SIZE (0..127)) · read-only · current The file name of the image file. | ||||
| SfileAutoUpgradeOpCodeForceModeStatus | 1.3.6.1.4.1.259.6.10.94.1.24.4.4 | EnabledStatus | RW | |
scalar · EnabledStatus · read-write · current Set this variable to enabled(1) to enable the force-mode of automatic image upgrade. In force-mode, switch shall check the new image every provision completed and detected an interface is configured. Set this variable to disabled(2) to disable this mode. | ||||
| NdnsMgt | 1.3.6.1.4.1.259.6.10.94.1.26 | |||
| SdnsDomainLookup | 1.3.6.1.4.1.259.6.10.94.1.26.1 | EnabledStatus | RW | |
scalar · EnabledStatus · read-write · current To enable the IP Domain Naming System (DNS)-based host name-to-address translation. | ||||
| SdnsDomainName | 1.3.6.1.4.1.259.6.10.94.1.26.2 | DisplayString (SIZE (0..255)) | RW | |
scalar · DisplayString (SIZE (0..255)) · read-write · current To define a default domain name to complete unqualified host names (names without a dotted-decimal domain name). | ||||
| TdnsHostTable | 1.3.6.1.4.1.259.6.10.94.1.26.3 | NA | ||
table · not-accessible · current This table is used to define static host name-to-address mapping. | ||||
| RdnsHostEntry | 1.3.6.1.4.1.259.6.10.94.1.26.3.1 | NA | ||
| CdnsHostName | 1.3.6.1.4.1.259.6.10.94.1.26.3.1.1 | DisplayString (SIZE (1..255)) | NA | |
column · DisplayString (SIZE (1..255)) · not-accessible · current The DNS Host name. | ||||
| CdnsHostIndex | 1.3.6.1.4.1.259.6.10.94.1.26.3.1.2 | Integer32 (1..8) | NA | |
column · Integer32 (1..8) · not-accessible · current The secondary index of this dnsHostTable, representing the sequence of the dnsHostIp. | ||||
| CdnsHostIp | 1.3.6.1.4.1.259.6.10.94.1.26.3.1.3 | IpAddress | RC | |
column · IpAddress · read-create · current The DNS Host IP. | ||||
| TdnsDomainListTable | 1.3.6.1.4.1.259.6.10.94.1.26.5 | NA | ||
table · not-accessible · current This table defines a list of default domain names to complete unqualified host names. | ||||
| RdnsDomainListEntry | 1.3.6.1.4.1.259.6.10.94.1.26.5.1 | NA | ||
| CdnsDomainListName | 1.3.6.1.4.1.259.6.10.94.1.26.5.1.1 | DisplayString (SIZE (1..255)) | NA | |
column · DisplayString (SIZE (1..255)) · not-accessible · current Domain name. | ||||
| CdnsDomainListStatus | 1.3.6.1.4.1.259.6.10.94.1.26.5.1.2 | ValidStatus | RC | |
column · ValidStatus · read-create · current Setting this to valid(1) creates an entry. Setting this to invalid(2) destroys an entry. | ||||
| TdnsNameServerTable | 1.3.6.1.4.1.259.6.10.94.1.26.6 | NA | ||
table · not-accessible · current To specify the address of one or more name servers to use for name and address resolution. This table has fixed size, will get 0.0.0.0 dnsNameServerIp if this entry does not exist. | ||||
| RdnsNameServerEntry | 1.3.6.1.4.1.259.6.10.94.1.26.6.1 | NA | ||
| CdnsNameServerIndex | 1.3.6.1.4.1.259.6.10.94.1.26.6.1.1 | Integer32 (1..6) | NA | |
column · Integer32 (1..6) · not-accessible · current Index of this dnsNameServerTable, representing the sequence of the dnsNameServerIp. | ||||
| CdnsNameServerIp | 1.3.6.1.4.1.259.6.10.94.1.26.6.1.2 | IpAddress | RW | |
column · IpAddress · read-write · current IP address of name server. | ||||
| TdnsCacheTable | 1.3.6.1.4.1.259.6.10.94.1.26.7 | NA | ||
table · not-accessible · current To display the RRs in DNS cache. | ||||
| RdnsCacheEntry | 1.3.6.1.4.1.259.6.10.94.1.26.7.1 | NA | ||
| CdnsCacheIndex | 1.3.6.1.4.1.259.6.10.94.1.26.7.1.1 | Integer32 | NA | |
column · Integer32 · not-accessible · current The entry sequence number. | ||||
| CdnsCacheFlag | 1.3.6.1.4.1.259.6.10.94.1.26.7.1.2 | Integer32 | RO | |
column · Integer32 · read-only · current Always get 4, means this record is unreliable. | ||||
| CdnsCacheType | 1.3.6.1.4.1.259.6.10.94.1.26.7.1.3 | INTEGER | RO | |
column · INTEGER · read-only · current Cache Type: address(1); cname(2).
| ||||
| CdnsCacheIp | 1.3.6.1.4.1.259.6.10.94.1.26.7.1.4 | IpAddress | RO | |
column · IpAddress · read-only · current The DNS cache IP. | ||||
| CdnsCacheTtl | 1.3.6.1.4.1.259.6.10.94.1.26.7.1.5 | Integer32 (0..876000) | RO | |
column · Integer32 (0..876000) · read-only · current The DNS cache TTL. | ||||
| CdnsCacheDomain | 1.3.6.1.4.1.259.6.10.94.1.26.7.1.6 | DisplayString (SIZE (1..255)) | RO | |
column · DisplayString (SIZE (1..255)) · read-only · current The DNS cache domain. | ||||
| NstormMgt | 1.3.6.1.4.1.259.6.10.94.1.33 | |||
| NmcastStormMgt | 1.3.6.1.4.1.259.6.10.94.1.33.1 | |||
| TmcastStormTable | 1.3.6.1.4.1.259.6.10.94.1.33.1.1 | NA | ||
table · not-accessible · current Table to manage the control of multicast storms for ports. | ||||
| RmcastStormEntry | 1.3.6.1.4.1.259.6.10.94.1.33.1.1.1 | NA | ||
| CmcastStormIfIndex | 1.3.6.1.4.1.259.6.10.94.1.33.1.1.1.1 | Integer32 | NA | |
column · Integer32 · not-accessible · current The port and the trunk (including trunk members) interface of the portTable. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex in the IF-MIB. | ||||
| CmcastStormStatus | 1.3.6.1.4.1.259.6.10.94.1.33.1.1.1.2 | EnabledStatus | RW | |
column · EnabledStatus · read-write · current Whether multicast storm protection is enabled. | ||||
| CmcastStormOctetRate | 1.3.6.1.4.1.259.6.10.94.1.33.1.1.1.5 | Integer32 | RW | |
column · Integer32 · read-write · current Multicast storm threshold as octets per second. If this entry is for a trunk, this is the value for each member port. | ||||
| NbcastStormMgt | 1.3.6.1.4.1.259.6.10.94.1.33.3 | |||
| TbcastStormTable | 1.3.6.1.4.1.259.6.10.94.1.33.3.1 | NA | ||
table · not-accessible · current Table to manage the control of broadcast storms for ports. | ||||
| RbcastStormEntry | 1.3.6.1.4.1.259.6.10.94.1.33.3.1.1 | NA | ||
| CbcastStormIfIndex | 1.3.6.1.4.1.259.6.10.94.1.33.3.1.1.1 | Integer32 | NA | |
column · Integer32 · not-accessible · current The port and the trunk (including trunk members) interface of the portTable. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex in the IF-MIB. | ||||
| CbcastStormStatus | 1.3.6.1.4.1.259.6.10.94.1.33.3.1.1.2 | EnabledStatus | RW | |
column · EnabledStatus · read-write · current Whether broadcast storm protection is enabled. | ||||
| CbcastStormOctetRate | 1.3.6.1.4.1.259.6.10.94.1.33.3.1.1.5 | Integer32 | RW | |
column · Integer32 · read-write · current Broadcast storm threshold as octets per second. If this entry is for a trunk, this is the value for each member port. | ||||
| NunknownUcastStormMgt | 1.3.6.1.4.1.259.6.10.94.1.33.4 | |||
| TunknownUcastStormTable | 1.3.6.1.4.1.259.6.10.94.1.33.4.1 | NA | ||
table · not-accessible · current Table to manage the unknown unicast storm control. | ||||
| RunknownUcastStormEntry | 1.3.6.1.4.1.259.6.10.94.1.33.4.1.1 | NA | ||
row · not-accessible · current The conceptual row of unknownUcastStormTable. | ||||
| CunknownUcastStormIfIndex | 1.3.6.1.4.1.259.6.10.94.1.33.4.1.1.1 | Integer32 | NA | |
column · Integer32 · not-accessible · current The port or trunk interface of the portTable. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex in the IF-MIB. | ||||
| CunknownUcastStormStatus | 1.3.6.1.4.1.259.6.10.94.1.33.4.1.1.2 | EnabledStatus | RW | |
column · EnabledStatus · read-write · current The parameter indicates that the unknown unicast storm protection is enabled/disabled. | ||||
| CunknownUcastStormOctetRate | 1.3.6.1.4.1.259.6.10.94.1.33.4.1.1.5 | INTEGER | RW | |
column · INTEGER · read-write · current The parameter indicates the byte rate of the storm protection. | ||||
| NatcMgt | 1.3.6.1.4.1.259.6.10.94.1.33.5 | |||
| SatcBcastStormTcApplyTime | 1.3.6.1.4.1.259.6.10.94.1.33.5.1 | Integer32 | RW | |
scalar · Integer32 · read-write · current The parameter indicates the timing when the ATC (Auto Traffic Control) is activated after the broadcast traffic being detected as the storm. | ||||
| SatcBcastStormTcReleaseTime | 1.3.6.1.4.1.259.6.10.94.1.33.5.2 | Integer32 | RW | |
scalar · Integer32 · read-write · current The parameter indicates the timing when the ATC is released after the broadcast traffic being detected as no storm. | ||||
| TatcBcastStormTable | 1.3.6.1.4.1.259.6.10.94.1.33.5.3 | NA | ||
table · not-accessible · current The table contains the Auto Traffic Control configuration and the status for broadcast traffic. | ||||
| RatcBcastStormEntry | 1.3.6.1.4.1.259.6.10.94.1.33.5.3.1 | NA | ||
| CatcBcastStormIfIndex | 1.3.6.1.4.1.259.6.10.94.1.33.5.3.1.1 | Integer32 | AN | |
column · Integer32 · accessible-for-notify · current The specified port on which the ATC is applied. | ||||
| CatcBcastStormEnable | 1.3.6.1.4.1.259.6.10.94.1.33.5.3.1.2 | EnabledStatus | RW | |
column · EnabledStatus · read-write · current The parameter indicates whether the ATC of the broadcast traffic is applied. | ||||
| CatcBcastStormAutoRelease | 1.3.6.1.4.1.259.6.10.94.1.33.5.3.1.3 | EnabledStatus | RW | |
column · EnabledStatus · read-write · current The parameter indicates whether the Auto-Release feature of ATC is applied. | ||||
| CatcBcastStormSampleType | 1.3.6.1.4.1.259.6.10.94.1.33.5.3.1.4 | INTEGER | RW | |
column · INTEGER · read-write · current The parameter indicates the unit of traffic rate and threshold.
| ||||
| CatcBcastStormCurrentTrafficRate | 1.3.6.1.4.1.259.6.10.94.1.33.5.3.1.5 | Integer32 | RO | |
column · Integer32 · read-only · current The parameter indicates the current broadcast traffic rate. | ||||
| CatcBcastStormAlarmFireThreshold | 1.3.6.1.4.1.259.6.10.94.1.33.5.3.1.6 | Integer32 | RW | |
column · Integer32 · read-write · current The parameter indicates that if the current broadcast traffic rate exceeds the specified threshold, it will be treated as the storm. | ||||
| CatcBcastStormAlarmClearThreshold | 1.3.6.1.4.1.259.6.10.94.1.33.5.3.1.7 | Integer32 | RW | |
column · Integer32 · read-write · current The parameter indicates that if the current broadcast traffic falls below the specified threshold it will be treated as the normal traffic. | ||||
| CatcBcastStormTcAction | 1.3.6.1.4.1.259.6.10.94.1.33.5.3.1.8 | INTEGER | RW | |
column · INTEGER · read-write · current The parameter indicates the protecting action which ATC will applied to the specified port.
| ||||
| CatcBcastStormAlarmFireTrapStatus | 1.3.6.1.4.1.259.6.10.94.1.33.5.3.1.9 | EnabledStatus | RW | |
column · EnabledStatus · read-write · current The parameter indicates whether the trap has to be sent when the broadcast storm has been detected. | ||||
| CatcBcastStormAlarmClearTrapStatus | 1.3.6.1.4.1.259.6.10.94.1.33.5.3.1.10 | EnabledStatus | RW | |
column · EnabledStatus · read-write · current The parameter indicates whether the trap has to be sent when the broadcast storm has been detected as the normal traffic. | ||||
| CatcBcastStormTcApplyTrapStatus | 1.3.6.1.4.1.259.6.10.94.1.33.5.3.1.11 | EnabledStatus | RW | |
column · EnabledStatus · read-write · current The parameter indicates whether the trap has to be sent when the ATC is activated. | ||||
| CatcBcastStormTcReleaseTrapStatus | 1.3.6.1.4.1.259.6.10.94.1.33.5.3.1.12 | EnabledStatus | RW | |
column · EnabledStatus · read-write · current The parameter indicates whether the trap has to be sent when the ATC is released. | ||||
| SatcMcastStormTcApplyTime | 1.3.6.1.4.1.259.6.10.94.1.33.5.4 | INTEGER | RW | |
scalar · INTEGER · read-write · current The parameter indicates the timing when the ATC (Auto Traffic Control) is activated after the broadcast traffic being detected as the storm. | ||||
| SatcMcastStormTcReleaseTime | 1.3.6.1.4.1.259.6.10.94.1.33.5.5 | INTEGER | RW | |
scalar · INTEGER · read-write · current The parameter indicates the timing when the ATC is released after the broadcast traffic being detected as no storm. | ||||
| TatcMcastStormTable | 1.3.6.1.4.1.259.6.10.94.1.33.5.6 | NA | ||
table · not-accessible · current The table contains the Auto Traffic Control configuration and the status for mulicast traffic. | ||||
| RatcMcastStormEntry | 1.3.6.1.4.1.259.6.10.94.1.33.5.6.1 | NA | ||
| CatcMcastStormIfIndex | 1.3.6.1.4.1.259.6.10.94.1.33.5.6.1.1 | Integer32 | AN | |
column · Integer32 · accessible-for-notify · current The specified port on which the ATC is applied. | ||||
| CatcMcastStormEnable | 1.3.6.1.4.1.259.6.10.94.1.33.5.6.1.2 | EnabledStatus | RW | |
column · EnabledStatus · read-write · current The parameter indicates whether the ATC of the mulicast traffic is applied. | ||||
| CatcMcastStormAutoRelease | 1.3.6.1.4.1.259.6.10.94.1.33.5.6.1.3 | EnabledStatus | RW | |
column · EnabledStatus · read-write · current The parameter indicates whether the Auto-Release feature of ATC is applied. | ||||
| CatcMcastStormSampleType | 1.3.6.1.4.1.259.6.10.94.1.33.5.6.1.4 | INTEGER | RW | |
column · INTEGER · read-write · current The parameter indicates the unit of traffic rate and threshold.
| ||||
| CatcMcastStormCurrentTrafficRate | 1.3.6.1.4.1.259.6.10.94.1.33.5.6.1.5 | Integer32 | RO | |
column · Integer32 · read-only · current The parameter indicates the current mulicast traffic rate. | ||||
| CatcMcastStormAlarmFireThreshold | 1.3.6.1.4.1.259.6.10.94.1.33.5.6.1.6 | Integer32 | RW | |
column · Integer32 · read-write · current The parameter indicates that if the current mulicast traffic rate exceeds the specified threshold, it will be treated as the storm. | ||||
| CatcMcastStormAlarmClearThreshold | 1.3.6.1.4.1.259.6.10.94.1.33.5.6.1.7 | Integer32 | RW | |
column · Integer32 · read-write · current The parameter indicates that if the current mulicast traffic falls below the specified threshold it will be treated as the normal traffic. | ||||
| CatcMcastStormTcAction | 1.3.6.1.4.1.259.6.10.94.1.33.5.6.1.8 | INTEGER | RW | |
column · INTEGER · read-write · current The parameter indicates the protecting action which ATC will applied to the specified port.
| ||||
| CatcMcastStormAlarmFireTrapStatus | 1.3.6.1.4.1.259.6.10.94.1.33.5.6.1.9 | EnabledStatus | RW | |
column · EnabledStatus · read-write · current The parameter indicates whether the trap has to be sent when the mulicast storm has been detected. | ||||
| CatcMcastStormAlarmClearTrapStatus | 1.3.6.1.4.1.259.6.10.94.1.33.5.6.1.10 | EnabledStatus | RW | |
column · EnabledStatus · read-write · current The parameter indicates whether the trap has to be sent when the mulicast storm has been detected as the normal traffic. | ||||
| CatcMcastStormTcApplyTrapStatus | 1.3.6.1.4.1.259.6.10.94.1.33.5.6.1.11 | EnabledStatus | RW | |
column · EnabledStatus · read-write · current The parameter indicates whether the trap has to be sent when the ATC is activated. | ||||
| CatcMcastStormTcReleaseTrapStatus | 1.3.6.1.4.1.259.6.10.94.1.33.5.6.1.12 | EnabledStatus | RW | |
column · EnabledStatus · read-write · current The parameter indicates whether the trap has to be sent when the ATC is released. | ||||
| NsysResourceMgt | 1.3.6.1.4.1.259.6.10.94.1.39 | |||
| NcpuStatus | 1.3.6.1.4.1.259.6.10.94.1.39.2 | |||
| ScpuCurrentUti | 1.3.6.1.4.1.259.6.10.94.1.39.2.1 | INTEGER (1..100) | RO | |
scalar · INTEGER (1..100) · read-only · current The current CPU utilization in percent in the past 5 seconds.
| ||||
| ScpuStatMaxUti | 1.3.6.1.4.1.259.6.10.94.1.39.2.2 | INTEGER (1..100) | RO | |
scalar · INTEGER (1..100) · read-only · current The maximum CPU utilization in percent in the past 60 seconds.
| ||||
| ScpuStatAvgUti | 1.3.6.1.4.1.259.6.10.94.1.39.2.3 | INTEGER (1..100) | RO | |
scalar · INTEGER (1..100) · read-only · current The average CPU utilization in percent in the past 60 seconds.
| ||||
| ScpuPeakTime | 1.3.6.1.4.1.259.6.10.94.1.39.2.4 | DisplayString | RO | |
scalar · DisplayString · read-only · current The time when the CPU utilization reaches cpuUtiRisingThreshold in the format of 'Mmm _d hh:mm:ss yyyy' as defined in sysCurrentTime of this MIB. | ||||
| ScpuPeakDuration | 1.3.6.1.4.1.259.6.10.94.1.39.2.5 | INTEGER | RO | |
scalar · INTEGER · read-only · current The duration from the CPU utilization reaches cpuUtiRisingThreshold to reaches cpuUtiFallingThreshold, in seconds.
| ||||
| ScpuUtiRisingThreshold | 1.3.6.1.4.1.259.6.10.94.1.39.2.6 | INTEGER (1..100) | RW | |
scalar · INTEGER (1..100) · read-write · current The rising threshold of the cpu utilization.
| ||||
| ScpuUtiFallingThreshold | 1.3.6.1.4.1.259.6.10.94.1.39.2.7 | INTEGER (1..100) | RW | |
scalar · INTEGER (1..100) · read-write · current The falling threshold of the cpu utilization.
| ||||
| NmemoryStatus | 1.3.6.1.4.1.259.6.10.94.1.39.3 | |||
| SmemoryTotal | 1.3.6.1.4.1.259.6.10.94.1.39.3.1 | INTEGER | RO | |
scalar · INTEGER · read-only · current The total amount of the memory in kilobytes. | ||||
| SmemoryAllocated | 1.3.6.1.4.1.259.6.10.94.1.39.3.2 | INTEGER | RO | |
scalar · INTEGER · read-only · current The amount of the memory allocated in kilobytes. | ||||
| SmemoryFreed | 1.3.6.1.4.1.259.6.10.94.1.39.3.3 | INTEGER | RO | |
scalar · INTEGER · read-only · current The amount of the free memory in kilobytes. | ||||
| SmemoryFreedInPercent | 1.3.6.1.4.1.259.6.10.94.1.39.3.4 | INTEGER (1..100) | RO | |
scalar · INTEGER (1..100) · read-only · current the memory freed in proportion to the total memory. | ||||
| SmemoryUtiRisingThreshold | 1.3.6.1.4.1.259.6.10.94.1.39.3.5 | INTEGER (1..100) | RW | |
scalar · INTEGER (1..100) · read-write · current The rising threshold of the memory utilization.
| ||||
| SmemoryUtiFallingThreshold | 1.3.6.1.4.1.259.6.10.94.1.39.3.6 | INTEGER (1..100) | RW | |
scalar · INTEGER (1..100) · read-write · current The falling threshold of the memory utilization.
| ||||
| NmvrMgt | 1.3.6.1.4.1.259.6.10.94.1.44 | |||
| SmvrStatus | 1.3.6.1.4.1.259.6.10.94.1.44.1 | EnabledStatus | RW | |
scalar · EnabledStatus · read-write · current Parameter to enable or disable MVR(Multicast VLAN Registration) on the device. NOTE: IGMP Snooping must be enabled first before enabling MVR and MVR will be disabled when IGMP Snooping is disabled. | ||||
| SmvrVlanId | 1.3.6.1.4.1.259.6.10.94.1.44.2 | Integer32 | RW | |
scalar · Integer32 · read-write · current To set VLAN for MVR.The VLAN identified by a particular value of this index is the same VLAN as identified by the same value of dot1qVlanIndex in the Q-BRIDGE-MIB. | ||||
| SmvrMaxGroups | 1.3.6.1.4.1.259.6.10.94.1.44.3 | Integer32 | RO | |
scalar · Integer32 · read-only · current The maximum allow number of MVR groups to be forwarded according to subscriber port. If mvrCurrentGroups over mvrMaxGroups, the multicast stream will be flood to all receiver port. | ||||
| SmvrCurrentGroups | 1.3.6.1.4.1.259.6.10.94.1.44.4 | Integer32 | RO | |
scalar · Integer32 · read-only · current The current learned number of MVR groups. | ||||
| TmvrGroupStaticTable | 1.3.6.1.4.1.259.6.10.94.1.44.7 | NA | ||
table · not-accessible · current The table for configuring the static members of the MVR group. | ||||
| RmvrGroupStaticEntry | 1.3.6.1.4.1.259.6.10.94.1.44.7.1 | NA | ||
row · not-accessible · current The entry for configuring the static members of the MVR group. | ||||
| CmvrGroupStaticAddress | 1.3.6.1.4.1.259.6.10.94.1.44.7.1.1 | IpAddress | NA | |
column · IpAddress · not-accessible · current The multicast address of the MVR group. | ||||
| CmvrGroupStaticPorts | 1.3.6.1.4.1.259.6.10.94.1.44.7.1.2 | PortList | RW | |
column · PortList · read-write · current The set of ports configured by management in this entry. Ports entered in this list will be the static members of this MVR group. | ||||
| CmvrGroupStaticStatus | 1.3.6.1.4.1.259.6.10.94.1.44.7.1.3 | INTEGER | RW | |
column · INTEGER · read-write · current Setting this to valid(1) creates an entry. Setting this to invalid(2) destroys an entry.
| ||||
| TmvrGroupCurrentTable | 1.3.6.1.4.1.259.6.10.94.1.44.8 | NA | ||
table · not-accessible · current The table for the current members of the MVR group. | ||||
| RmvrGroupCurrentEntry | 1.3.6.1.4.1.259.6.10.94.1.44.8.1 | NA | ||
row · not-accessible · current The entry for the current members of the MVR group. | ||||
| CmvrGroupCurrentAddress | 1.3.6.1.4.1.259.6.10.94.1.44.8.1.1 | IpAddress | NA | |
column · IpAddress · not-accessible · current The multicast address of the MVR group. | ||||
| CmvrGroupCurrentPorts | 1.3.6.1.4.1.259.6.10.94.1.44.8.1.2 | PortList | RO | |
column · PortList · read-only · current The complete set of ports currently associated with this MVR group. | ||||
| CmvrGroupCurrentReceiverVlan | 1.3.6.1.4.1.259.6.10.94.1.44.8.1.3 | Integer32 (0..4094) | RO | |
column · Integer32 (0..4094) · read-only · current This object indicates the receiver VLAN of the MVR group. None of receiver VLAN belong to the MVR group when the value of this object is 0. | ||||
| TmvrPortTable | 1.3.6.1.4.1.259.6.10.94.1.44.9 | NA | ||
table · not-accessible · current The table for configuring the MVR port. | ||||
| RmvrPortEntry | 1.3.6.1.4.1.259.6.10.94.1.44.9.1 | NA | ||
| CmvrIfIndex | 1.3.6.1.4.1.259.6.10.94.1.44.9.1.1 | InterfaceIndex | NA | |
column · InterfaceIndex · not-accessible · current The port interface of the portTable. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex in the IF-MIB. | ||||
| CmvrPortType | 1.3.6.1.4.1.259.6.10.94.1.44.9.1.2 | INTEGER | RW | |
column · INTEGER · read-write · current For configuring the MVR port type. To disable the MVR port type, use the none(0).
| ||||
| CmvrPortImmediateLeave | 1.3.6.1.4.1.259.6.10.94.1.44.9.1.3 | EnabledStatus | RW | |
column · EnabledStatus · read-write · current To enable immediate leave on MVR port. | ||||
| CmvrPortActive | 1.3.6.1.4.1.259.6.10.94.1.44.9.1.4 | INTEGER | RO | |
column · INTEGER · read-only · current To indicate if the port is associated with the MVR group. If the port is the MVR receiver port or the MVR source port in MVR vlan, the status is active(1); otherwise the status is inactive(2).
| ||||
| SmvrRunningStatus | 1.3.6.1.4.1.259.6.10.94.1.44.10 | TruthValue | RO | |
scalar · TruthValue · read-only · current Describes the running status of MVR (Multicast VLAN Registration) to the switch. A value of true(1) indicates that all necessary conditions in the MVR environment are satisfied. A value of false(2) indicates that some necessary conditions in the MVR environment are not satisfied. | ||||
| SmvrReceiverVlanId | 1.3.6.1.4.1.259.6.10.94.1.44.12 | Integer32 (0..4094) | RW | |
scalar · Integer32 (0..4094) · read-write · current To set receiver VLAN for MVR.The VLAN identified by a particular value of this index is the same VLAN as identified by the same value of dot1qVlanIndex in the Q-BRIDGE-MIB. To disable the VLAN, set the value to 0. | ||||
| SmvrMaxReceiverGroups | 1.3.6.1.4.1.259.6.10.94.1.44.13 | Integer32 | RO | |
scalar · Integer32 · read-only · current The maximum number of MVR receiver groups. | ||||
| SmvrCurrentReceiverGroups | 1.3.6.1.4.1.259.6.10.94.1.44.14 | Integer32 | RO | |
scalar · Integer32 · read-only · current The current number of MVR receiver groups. | ||||
| TmvrReceiverGroupTable | 1.3.6.1.4.1.259.6.10.94.1.44.15 | NA | ||
table · not-accessible · current The table for configuring the MVR receiver group. | ||||
| RmvrReceiverGroupEntry | 1.3.6.1.4.1.259.6.10.94.1.44.15.1 | NA | ||
row · not-accessible · current The entry for configuring the MVR receiver group.
| ||||
| CmvrReceiverGroupId | 1.3.6.1.4.1.259.6.10.94.1.44.15.1.1 | IpAddress | NA | |
column · IpAddress · not-accessible · current The multicast address of a MVR receiver group. | ||||
| CmvrReceiverGroupActive | 1.3.6.1.4.1.259.6.10.94.1.44.15.1.2 | INTEGER | RO | |
column · INTEGER · read-only · current Indicate whether the receiver group has a member or not. If there are no members, the status will be inactive(2); if there are members, the status will be active(1).
| ||||
| TmvrReceiverGroupStaticTable | 1.3.6.1.4.1.259.6.10.94.1.44.16 | NA | ||
table · not-accessible · current The table for configuring static members of the MVR receiver group. | ||||
| RmvrReceiverGroupStaticEntry | 1.3.6.1.4.1.259.6.10.94.1.44.16.1 | NA | ||
row · not-accessible · current The entry for configuring static members of the MVR receiver group. | ||||
| CmvrReceiverGroupStaticAddress | 1.3.6.1.4.1.259.6.10.94.1.44.16.1.1 | IpAddress | NA | |
column · IpAddress · not-accessible · current The multicast address of a MVR receiver group. | ||||
| CmvrReceiverGroupStaticPorts | 1.3.6.1.4.1.259.6.10.94.1.44.16.1.2 | PortList | RW | |
column · PortList · read-write · current The set of ports configured by management in this entry. Ports entered in this list will be the static members of this MVR receiver group. | ||||
| TmvrReceiverGroupCurrentTable | 1.3.6.1.4.1.259.6.10.94.1.44.17 | NA | ||
table · not-accessible · current The table for the current members of a MVR receiver group. | ||||
| RmvrReceiverGroupCurrentEntry | 1.3.6.1.4.1.259.6.10.94.1.44.17.1 | NA | ||
row · not-accessible · current The entry for the current members of a MVR receiver group. | ||||
| CmvrReceiverGroupCurrentAddress | 1.3.6.1.4.1.259.6.10.94.1.44.17.1.1 | IpAddress | NA | |
column · IpAddress · not-accessible · current The multicast address of a MVR receiver group. | ||||
| CmvrReceiverGroupCurrentPorts | 1.3.6.1.4.1.259.6.10.94.1.44.17.1.2 | PortList | RO | |
column · PortList · read-only · current The complete set of ports currently associated with a MVR receiver group. | ||||
| SmvrForwardingPriority | 1.3.6.1.4.1.259.6.10.94.1.44.18 | Integer32 (0..6 | 65535) | RW | |
scalar · Integer32 (0..6 | 65535) · read-write · current Configure MVR multicast stream forwarding priority. If value is 65535, it means the priority is disabled | ||||
| TmvrGroupCtlTable | 1.3.6.1.4.1.259.6.10.94.1.44.26 | NA | ||
table · not-accessible · current Configure MVR group range | ||||
| RmvrGroupCtlEntry | 1.3.6.1.4.1.259.6.10.94.1.44.26.1 | NA | ||
row · not-accessible · current The entry for configuring the MVR group range. If configured range overlap to old one, it will be combinded with old one. | ||||
| CmvrGroupStartIPAddress | 1.3.6.1.4.1.259.6.10.94.1.44.26.1.1 | IpAddress | NA | |
column · IpAddress · not-accessible · current MVR Profile range start IP address. NOTE: All mvrGroupStartIPAddress use the same buffer to temply store the mvrGroupStartIPAddress before mvrGroupCtlAction really creat the profile. | ||||
| CmvrGroupEndIPAddress | 1.3.6.1.4.1.259.6.10.94.1.44.26.1.2 | IpAddress | NA | |
column · IpAddress · not-accessible · current MVR group range end IP address. | ||||
| CmvrGroupCtlAction | 1.3.6.1.4.1.259.6.10.94.1.44.26.1.3 | INTEGER | RW | |
column · INTEGER · read-write · current Set this object to create(2) to create mvr group range. Set this object to destory(3) to delete mvr group range. When the action is complete, this object becomes noAction(1).
| ||||
| TmvrRecieverGroupCtlTable | 1.3.6.1.4.1.259.6.10.94.1.44.29 | NA | ||
table · not-accessible · current Configure MVR receiver group | ||||
| RmvrReceiverGroupCtlEntry | 1.3.6.1.4.1.259.6.10.94.1.44.29.1 | NA | ||
row · not-accessible · current The entry for configuring the MVR receiver group. | ||||
| CmvrReceiverGroupIPAddress | 1.3.6.1.4.1.259.6.10.94.1.44.29.1.1 | IpAddress | NA | |
column · IpAddress · not-accessible · current MVR receiver group IP address. NOTE: All mvrReceiverGroupIPAddress use the same buffer to temply store the mvrReceiverGroupIPAddress before mvrReceiverGroupCtlAction really creat the profile. | ||||
| CmvrReceiverGroupMask | 1.3.6.1.4.1.259.6.10.94.1.44.29.1.2 | IpAddress | NA | |
column · IpAddress · not-accessible · current MVR receiver group IP mask. | ||||
| CmvrReceiverGroupCtlAction | 1.3.6.1.4.1.259.6.10.94.1.44.29.1.3 | INTEGER | RW | |
column · INTEGER · read-write · current Set this object to create(2) to create mvr receiver group. Set this object to destory(3) to delete mvr receiver group. When destroy mvr receiver group, it needn't to specify mvrReceiverGroupIPAddress and mvrReceiverGroupMask. When the action is complete, this object becomes noAction(1).
| ||||
| NdhcpSnoopMgt | 1.3.6.1.4.1.259.6.10.94.1.46 | |||
| NdhcpSnoopGlobal | 1.3.6.1.4.1.259.6.10.94.1.46.1 | |||
| SdhcpSnoopEnable | 1.3.6.1.4.1.259.6.10.94.1.46.1.1 | EnabledStatus | RW | |
scalar · EnabledStatus · read-write · current This object indicates whether the DHCP Snooping feature is enabled. | ||||
| SdhcpSnoopVerifyMacAddressEnable | 1.3.6.1.4.1.259.6.10.94.1.46.1.2 | EnabledStatus | RW | |
scalar · EnabledStatus · read-write · current This object indicates whether DHCP Snooping Mac address verification is enabled. | ||||
| SdhcpSnoopInformationOptionEnable | 1.3.6.1.4.1.259.6.10.94.1.46.1.3 | EnabledStatus | RW | |
scalar · EnabledStatus · read-write · current This object indicates whether the DHCP snooping information option(option 82) feature is enabled. | ||||
| SdhcpSnoopInformationOptionPolicy | 1.3.6.1.4.1.259.6.10.94.1.46.1.4 | INTEGER | RW | |
scalar · INTEGER · read-write · current This object indicates which reforwarding policy shall be used for DHCP snooping information option(option 82). A value of drop(1) means to drop the DHCP request packet which has the information option(option 82). A value of keep(2) means to keep the existing information option(option 82) of the DHCP request packet. A value of replace(3), which is the default value, means to replace the existing information option(option 82) of the DHCP request packet.
| ||||
| SdhcpSnoopBindingsTableCtlAction | 1.3.6.1.4.1.259.6.10.94.1.46.1.5 | INTEGER | RW | |
scalar · INTEGER · read-write · current Set this to store(2) to store DHCP snooping binding entries to flash. Set this to clear(3) to clear DHCP snooping binding entries from flash. noAction(1) will always be obtained when reading this variable.
| ||||
| SdhcpSnoopInformationOptionRemoteIDMode | 1.3.6.1.4.1.259.6.10.94.1.46.1.6 | INTEGER | RW | |
scalar · INTEGER · read-write · current Provide five mode for insertion remote-id sub-option of option 82. If configured-string(5) has been set, dhcpSnoopInformationOptionRemoteIDString will take effect.
| ||||
| SdhcpSnoopInformationOptionRemoteIDString | 1.3.6.1.4.1.259.6.10.94.1.46.1.7 | OCTET STRING (SIZE (0..32)) | RW | |
scalar · OCTET STRING (SIZE (0..32)) · read-write · current Set string to remote-id sub-option of option 82. It only take effect when dhcpSnoopInformationOptionRemoteIDMode is set to configured-string(5) | ||||
| SdhcpSnoopInformationOptionEncodeFormat | 1.3.6.1.4.1.259.6.10.94.1.46.1.8 | INTEGER | RW | |
scalar · INTEGER · read-write · current Set encode format for CID and RID in option82. Set extra-subtype-included(1) will have extra subtype and length filed in CID and RID. Set no-extra-subtype-included(2) will only have TLV format for CID and RID.
| ||||
| NdhcpSnoopVlan | 1.3.6.1.4.1.259.6.10.94.1.46.2 | |||
| TdhcpSnoopVlanConfigTable | 1.3.6.1.4.1.259.6.10.94.1.46.2.1 | NA | ||
table · not-accessible · current A table contains DHCP Snooping configurations of existing VLANs. | ||||
| RdhcpSnoopVlanConfigEntry | 1.3.6.1.4.1.259.6.10.94.1.46.2.1.1 | NA | ||
row · not-accessible · current An instance contains the configuration to enable or disable DHCP Snooping at each existing VLAN.
| ||||
| CdhcpSnoopVlanIndex | 1.3.6.1.4.1.259.6.10.94.1.46.2.1.1.1 | VlanIndex | NA | |
column · VlanIndex · not-accessible · current This object indicates the VLAN ID on which DHCP Snooping feature is configured. | ||||
| CdhcpSnoopVlanEnable | 1.3.6.1.4.1.259.6.10.94.1.46.2.1.1.2 | EnabledStatus | RW | |
column · EnabledStatus · read-write · current This object indicates whether DHCP Snooping is enabled in this VLAN. | ||||
| NdhcpSnoopInterface | 1.3.6.1.4.1.259.6.10.94.1.46.3 | |||
| TdhcpSnoopPortConfigTable | 1.3.6.1.4.1.259.6.10.94.1.46.3.1 | NA | ||
table · not-accessible · current A table provides the mechanism to configure the trust state of each port or trunk for DHCP Snooping purpose. | ||||
| RdhcpSnoopPortConfigEntry | 1.3.6.1.4.1.259.6.10.94.1.46.3.1.1 | NA | ||
row · not-accessible · current An instance contains the configuration to enable or disable trust state of each port or trunk for DHCP Snooping purpose.
| ||||
| CdhcpSnoopPortIfIndex | 1.3.6.1.4.1.259.6.10.94.1.46.3.1.1.1 | InterfaceIndex | NA | |
column · InterfaceIndex · not-accessible · current The ifIndex value of the port or trunk. | ||||
| CdhcpSnoopPortTrustEnable | 1.3.6.1.4.1.259.6.10.94.1.46.3.1.1.2 | EnabledStatus | RW | |
column · EnabledStatus · read-write · current This object indicates whether the port or trunk is trusted for DHCP Snooping purpose. | ||||
| CdhcpSnoopPortCircuitIDMode | 1.3.6.1.4.1.259.6.10.94.1.46.3.1.1.3 | INTEGER | RW | |
column · INTEGER · read-write · current Provide two mode for insertion circuit-id sub-option of option 82. If configured-string(2) has been set, dhcpSnoopPortCircuitIDString will take effect.
| ||||
| CdhcpSnoopPortCircuitIDString | 1.3.6.1.4.1.259.6.10.94.1.46.3.1.1.4 | OCTET STRING (SIZE (0..32)) | RW | |
column · OCTET STRING (SIZE (0..32)) · read-write · current Set string to circuit-id sub-option of option 82. It only take effect when dhcpSnoopPortCircuitIDMode is set to configured-string(2) | ||||
| NdhcpSnoopBindings | 1.3.6.1.4.1.259.6.10.94.1.46.4 | |||
| TdhcpSnoopBindingsTable | 1.3.6.1.4.1.259.6.10.94.1.46.4.1 | NA | ||
table · not-accessible · current A table contains the DHCP bindings information learnt by the device. | ||||
| RdhcpSnoopBindingsEntry | 1.3.6.1.4.1.259.6.10.94.1.46.4.1.1 | NA | ||
row · not-accessible · current An instance contains the Mac address, IP address type, IP address, VLAN number, interface number, leased time and status. | ||||
| CdhcpSnoopBindingsVlanIndex | 1.3.6.1.4.1.259.6.10.94.1.46.4.1.1.1 | VlanIndex | NA | |
column · VlanIndex · not-accessible · current This object indicates the VLAN which a DHCP client host belongs to. | ||||
| CdhcpSnoopBindingsMacAddress | 1.3.6.1.4.1.259.6.10.94.1.46.4.1.1.2 | MacAddress | NA | |
column · MacAddress · not-accessible · current This object indicates the MAC address of a DHCP client host. | ||||
| CdhcpSnoopBindingsAddrType | 1.3.6.1.4.1.259.6.10.94.1.46.4.1.1.3 | InetAddressType | RO | |
column · InetAddressType · read-only · current This object indicates the type of IP address denoted in dhcpSnoopBindingsIpAddress type. | ||||
| CdhcpSnoopBindingsEntryType | 1.3.6.1.4.1.259.6.10.94.1.46.4.1.1.4 | INTEGER | RO | |
column · INTEGER · read-only · current This object indicates that this binding is obtained from dynamically learning or is a static configuraion.
| ||||
| CdhcpSnoopBindingsIpAddress | 1.3.6.1.4.1.259.6.10.94.1.46.4.1.1.5 | IpAddress | RO | |
column · IpAddress · read-only · current This object indicates the allocated IP address of a DHCP client host. | ||||
| CdhcpSnoopBindingsPortIfIndex | 1.3.6.1.4.1.259.6.10.94.1.46.4.1.1.6 | InterfaceIndex | RO | |
column · InterfaceIndex · read-only · current This object indicates the port or trunk where a DHCP client host connects to. | ||||
| CdhcpSnoopBindingsLeaseTime | 1.3.6.1.4.1.259.6.10.94.1.46.4.1.1.7 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current This object indicates the leased time of this DHCP bindings. | ||||
| NdhcpSnoopStatistics | 1.3.6.1.4.1.259.6.10.94.1.46.5 | |||
| SdhcpSnoopTotalForwardedPkts | 1.3.6.1.4.1.259.6.10.94.1.46.5.1 | Counter32 | RO | |
scalar · Counter32 · read-only · current Indicates the total number of packets subjected to DHCP Snooping is forwarded. | ||||
| SdhcpSnoopUntrustedPortDroppedPkts | 1.3.6.1.4.1.259.6.10.94.1.46.5.3 | Counter32 | RO | |
scalar · Counter32 · read-only · current Indicates the number of packets subjected to DHCP Snooping is dropped because they come from untrusted interface. | ||||
| NclusterMgt | 1.3.6.1.4.1.259.6.10.94.1.47 | |||
| SclusterEnable | 1.3.6.1.4.1.259.6.10.94.1.47.1 | EnabledStatus | RW | |
scalar · EnabledStatus · read-write · current Enables or disables clustering on the device. | ||||
| SclusterCommanderEnable | 1.3.6.1.4.1.259.6.10.94.1.47.2 | EnabledStatus | RW | |
scalar · EnabledStatus · read-write · current Enables or disables the device as commander in a cluster. | ||||
| SclusterIpPool | 1.3.6.1.4.1.259.6.10.94.1.47.4 | IpAddress | RW | |
scalar · IpAddress · read-write · current The start internal IP address of a cluster pool. | ||||
| SclusterClearCandidateTable | 1.3.6.1.4.1.259.6.10.94.1.47.5 | INTEGER | RW | |
scalar · INTEGER · read-write · current Setting this object to clear(2) starts to clear the candidate table.
| ||||
| SclusterRole | 1.3.6.1.4.1.259.6.10.94.1.47.6 | INTEGER | RO | |
scalar · INTEGER · read-only · current The current role of the device in a cluster.
commander(1) : The switch is the controlling device in a
cluster.
candidate(2) : The switch has been discovered by the commander,
but it has not been manually configured
for access from the commander.
activeMember(3): The switch has been manually configured for access
from the commander and it is active
in the cluster.
disabled(5) : The switch has clustering disabled.
| ||||
| SclusterMemberCount | 1.3.6.1.4.1.259.6.10.94.1.47.7 | Counter32 | RO | |
scalar · Counter32 · read-only · current The total number of members in a cluster. | ||||
| SclusterCandidateCount | 1.3.6.1.4.1.259.6.10.94.1.47.8 | Counter32 | RO | |
scalar · Counter32 · read-only · current The total number of candidates in a cluster. | ||||
| TclusterCandidateTable | 1.3.6.1.4.1.259.6.10.94.1.47.9 | NA | ||
table · not-accessible · current A table listing cluster candidates. | ||||
| RclusterCandidateEntry | 1.3.6.1.4.1.259.6.10.94.1.47.9.1 | NA | ||
row · not-accessible · current A conceptual row containing the information of the candidate. | ||||
| CclusterCandidateMacAddr | 1.3.6.1.4.1.259.6.10.94.1.47.9.1.1 | MacAddress | NA | |
column · MacAddress · not-accessible · current The MAC address of the candidate. | ||||
| CclusterCandidateDesc | 1.3.6.1.4.1.259.6.10.94.1.47.9.1.3 | DisplayString (SIZE (0..42)) | RO | |
column · DisplayString (SIZE (0..42)) · read-only · current The description of the candidate. | ||||
| CclusterCandidateRole | 1.3.6.1.4.1.259.6.10.94.1.47.9.1.4 | INTEGER | RO | |
column · INTEGER · read-only · current The role of the candidate.
candidate(2) : The switch is discovered by the commander,
but it has not been manually configured for
access from the commander.
activeMember(3) : The switch is manually configured for access
from the commander and it is active in the
cluster.
inactiveMember(4): The switch is manually configured for access
from the commander, but it is inactive in
the cluster.
| ||||
| TclusterMemberTable | 1.3.6.1.4.1.259.6.10.94.1.47.10 | NA | ||
table · not-accessible · current A table listing clustering members. | ||||
| RclusterMemberEntry | 1.3.6.1.4.1.259.6.10.94.1.47.10.1 | NA | ||
row · not-accessible · current A conceptual row containing the information of the member.
| ||||
| CclusterMemberId | 1.3.6.1.4.1.259.6.10.94.1.47.10.1.1 | Unsigned32 | NA | |
column · Unsigned32 · not-accessible · current The ID of the member. | ||||
| CclusterMemberMacAddr | 1.3.6.1.4.1.259.6.10.94.1.47.10.1.2 | MacAddress | RO | |
column · MacAddress · read-only · current The MAC address of the member. | ||||
| CclusterMemberDesc | 1.3.6.1.4.1.259.6.10.94.1.47.10.1.3 | DisplayString (SIZE (0..42)) | RO | |
column · DisplayString (SIZE (0..42)) · read-only · current The description of the member. | ||||
| CclusterMemberActive | 1.3.6.1.4.1.259.6.10.94.1.47.10.1.4 | INTEGER | RO | |
column · INTEGER · read-only · current The active status of the member.
activeMember(3) : The switch is manually configured for access
from the commander and it is active in the
cluster.
inactiveMember(4): The switch is manually configured for access
from the commander, but it is inactive in
the cluster.
| ||||
| NclusterMemberAddCtl | 1.3.6.1.4.1.259.6.10.94.1.47.11 | |||
| SclusterMemberAddCtlMacAddr | 1.3.6.1.4.1.259.6.10.94.1.47.11.1 | MacAddress | RW | |
scalar · MacAddress · read-write · current The MAC address of the device associated with clusterMemberAddCtlAction. | ||||
| SclusterMemberAddCtlId | 1.3.6.1.4.1.259.6.10.94.1.47.11.2 | Unsigned32 | RW | |
scalar · Unsigned32 · read-write · current The member id associated with clusterMemberAddCtlAction. | ||||
| SclusterMemberAddCtlAction | 1.3.6.1.4.1.259.6.10.94.1.47.11.5 | INTEGER | RW | |
scalar · INTEGER · read-write · current Adds the device to members that can be accessed from the commander. The MAC of the device is the current value of clusterMemberAddCtlMacAddr and the assigned member ID is the current value of clusterMemberAddCtlId. Set this object to add(2) to begin adding the member.
| ||||
| NclusterMemberRemoveCtl | 1.3.6.1.4.1.259.6.10.94.1.47.12 | |||
| SclusterMemberRemoveCtlId | 1.3.6.1.4.1.259.6.10.94.1.47.12.1 | Unsigned32 | RW | |
scalar · Unsigned32 · read-write · current The member ID associated with clusterMemberRemoveCtlAction. | ||||
| SclusterMemberRemoveCtlAction | 1.3.6.1.4.1.259.6.10.94.1.47.12.2 | INTEGER | RW | |
scalar · INTEGER · read-write · current Removes the device from members that can be accessed from the commander. The member ID is the current value of clusterMemberRemoveCtlId. Set this object to remove(2) to begin removing the member.
| ||||
| NipSrcGuardMgt | 1.3.6.1.4.1.259.6.10.94.1.48 | |||
| TipSrcGuardConfigTable | 1.3.6.1.4.1.259.6.10.94.1.48.1 | NA | ||
table · not-accessible · current A table contains the configurations to enable or disable IP Source Guard at each port or trunk. | ||||
| RipSrcGuardConfigEntry | 1.3.6.1.4.1.259.6.10.94.1.48.1.1 | NA | ||
row · not-accessible · current An instance contains the configuration to enable or disable IP Source Guard at each port or trunk. | ||||
| CipSrcGuardPortIfIndex | 1.3.6.1.4.1.259.6.10.94.1.48.1.1.1 | InterfaceIndex | NA | |
column · InterfaceIndex · not-accessible · current This object idents the port or trunk which is capable of IP Source Guard feature. | ||||
| CipSrcGuardMode | 1.3.6.1.4.1.259.6.10.94.1.48.1.1.2 | INTEGER | RW | |
column · INTEGER · read-write · current This object indicates whether Ip Source Guard is enabled at this interface. If the value equals 0, it means Ip Source Guard is disabled. If the value equals 1, it means Ip Source Guard is enabled, and packets are filtered by checking source ip. If the value equals 2, it means Ip Source Guard is enabled and packets are filtered by checking source ip and source mac.
| ||||
| TipSrcGuardAddrTable | 1.3.6.1.4.1.259.6.10.94.1.48.2 | NA | ||
table · not-accessible · current A table contains the IP Source Guard bindings information learnt by the device. | ||||
| RipSrcGuardAddrEntry | 1.3.6.1.4.1.259.6.10.94.1.48.2.1 | NA | ||
row · not-accessible · current An instance contains the Mac address, IP address type, IP address, VLAN number, interface number, leased time and status. | ||||
| CipSrcGuardBindingsVlanIndex | 1.3.6.1.4.1.259.6.10.94.1.48.2.1.1 | VlanIndex | NA | |
column · VlanIndex · not-accessible · current This object indicates the VLAN which a DHCP client host belongs to. | ||||
| CipSrcGuardBindingsMacAddress | 1.3.6.1.4.1.259.6.10.94.1.48.2.1.2 | MacAddress | NA | |
column · MacAddress · not-accessible · current This object indicates the MAC address of a DHCP client host. | ||||
| CipSrcGuardBindingsAddrType | 1.3.6.1.4.1.259.6.10.94.1.48.2.1.3 | InetAddressType | RC | |
column · InetAddressType · read-create · current This object indicates the type of IP address denoted in ipSrcGuardBindingsIpAddress type. | ||||
| CipSrcGuardBindingsEntryType | 1.3.6.1.4.1.259.6.10.94.1.48.2.1.4 | INTEGER | RO | |
column · INTEGER · read-only · current This object indicates that this binding is obtained from dynamically learning or is a static configuraion.
| ||||
| CipSrcGuardBindingsIpAddress | 1.3.6.1.4.1.259.6.10.94.1.48.2.1.5 | IpAddress | RC | |
column · IpAddress · read-create · current This object indicates the allocated IP address of a DHCP client host. | ||||
| CipSrcGuardBindingsPortIfIndex | 1.3.6.1.4.1.259.6.10.94.1.48.2.1.6 | InterfaceIndex | RC | |
column · InterfaceIndex · read-create · current This object indicates the port or trunk where a DHCP client host connects to. | ||||
| CipSrcGuardBindingsLeaseTime | 1.3.6.1.4.1.259.6.10.94.1.48.2.1.7 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current This object indicates the leased time of this DHCP bindings. | ||||
| CipSrcGuardBindingsStatus | 1.3.6.1.4.1.259.6.10.94.1.48.2.1.8 | RowStatus | RC | |
column · RowStatus · read-create · current The status of this conceptual row entry. This object issued to manage the creation and deletion of conceptual rows. The status column has six defined values: - 'active', which indicates that the conceptual row is available for use by the managed device; - 'notInService', which indicates that the conceptual row exists in the agent, but is unavailable for use by the managed device. | ||||
| NupnpMgt | 1.3.6.1.4.1.259.6.10.94.1.49 | |||
| SupnpStatus | 1.3.6.1.4.1.259.6.10.94.1.49.1 | EnabledStatus | RW | |
scalar · EnabledStatus · read-write · current Sets enabled(1) to enable UPnP device, and sets disabled(2) to disable UPnP device. | ||||
| SupnpAdvertisingDuration | 1.3.6.1.4.1.259.6.10.94.1.49.2 | Integer32 (60..86400) | RW | |
scalar · Integer32 (60..86400) · read-write · current The interval(in seconds) between available UPnP device advertising messages sent by the switch. | ||||
| SupnpTtl | 1.3.6.1.4.1.259.6.10.94.1.49.3 | INTEGER (1..255) | RW | |
scalar · INTEGER (1..255) · read-write · current Specifies the TTL value of the UPnP advertising messages sent by the switch. When the TTL value is greater than 1, it is possible to send UPnP advertising messages to traverse multiple routers; at the same time, the UPnP device will send an IGMP Join message to the traverse multiple routers so that the routers will forward multicast messages to the UPnP device. | ||||
| NsFlowMgt | 1.3.6.1.4.1.259.6.10.94.1.55 | |||
| SsFlowStatus | 1.3.6.1.4.1.259.6.10.94.1.55.1 | EnabledStatus | RW | |
scalar · EnabledStatus · read-write · current Set this to enabled(1) to enable global sFlow, and set this to disabled(2) to disable global sFlow. | ||||
| TsFlowPortTable | 1.3.6.1.4.1.259.6.10.94.1.55.2 | NA | ||
table · not-accessible · current A table that contains the settings of sFlow. | ||||
| RsFlowPortEntry | 1.3.6.1.4.1.259.6.10.94.1.55.2.1 | NA | ||
| CsFlowPortIndex | 1.3.6.1.4.1.259.6.10.94.1.55.2.1.1 | Integer32 | NA | |
column · Integer32 · not-accessible · current The port number of a port. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex in the IF-MIB. | ||||
| CsFlowPortStatus | 1.3.6.1.4.1.259.6.10.94.1.55.2.1.2 | EnabledStatus | RC | |
column · EnabledStatus · read-create · current Set this to enabled(1) to enable sFlow on this port, and set this to disabled(2) to disable sFlow on this port. | ||||
| NdynamicArpInspectionMgt | 1.3.6.1.4.1.259.6.10.94.1.56 | |||
| NdaiGlobal | 1.3.6.1.4.1.259.6.10.94.1.56.1 | |||
| SdaiGlobalStatus | 1.3.6.1.4.1.259.6.10.94.1.56.1.1 | EnabledStatus | RW | |
scalar · EnabledStatus · read-write · current Set enabled(1) to enable dynamic ARP inspection. Set disabled(2) to disable dynamic ARP inspection. | ||||
| SdaiGlobalSrcMacValidation | 1.3.6.1.4.1.259.6.10.94.1.56.1.2 | EnabledStatus | RW | |
scalar · EnabledStatus · read-write · current Set enabled(1) to enable validation of source MAC address. Set disabled(2) to disable validation of source MAC address. | ||||
| SdaiGlobalDestMacValidation | 1.3.6.1.4.1.259.6.10.94.1.56.1.3 | EnabledStatus | RW | |
scalar · EnabledStatus · read-write · current Set enabled(1) to enable validation of destination MAC address. Set disabled(2) to disable validation of destination MAC address. | ||||
| SdaiGlobalIpAddrValidation | 1.3.6.1.4.1.259.6.10.94.1.56.1.4 | EnabledStatus | RW | |
scalar · EnabledStatus · read-write · current Set enabled(1) to enable validation of IP address. Set disabled(2) to disable validation of IP address. | ||||
| SdaiGlobalLogNumber | 1.3.6.1.4.1.259.6.10.94.1.56.1.5 | Integer32 (0..256) | RW | |
scalar · Integer32 (0..256) · read-write · current The number of log buffers for saving log message. The value 0 means not generating system messages. | ||||
| SdaiGlobalLogInterval | 1.3.6.1.4.1.259.6.10.94.1.56.1.6 | Integer32 (0..86400) | RW | |
scalar · Integer32 (0..86400) · read-write · current The value of the time interval for saving log messages. | ||||
| SdaiGlobalAdditionalValidStatus | 1.3.6.1.4.1.259.6.10.94.1.56.1.7 | EnabledStatus | RO | |
scalar · EnabledStatus · read-only · current The vaule of this object is disabled(2) when the status of daiGlobalSrcMacValidation, daiGlobalDestMacValidation, and daiGlobalIpAddrValidation are disabled; enabled(1) when one or more of these variables are enabled. | ||||
| NdaiVlan | 1.3.6.1.4.1.259.6.10.94.1.56.2 | |||
| TdaiVlanTable | 1.3.6.1.4.1.259.6.10.94.1.56.2.1 | NA | ||
table · not-accessible · current A table contains dynamic ARP inspection configurations for existing VLANs. | ||||
| RdaiVlanEntry | 1.3.6.1.4.1.259.6.10.94.1.56.2.1.1 | NA | ||
row · not-accessible · current An instance containing the configuration of dynamic ARP inspection for each existing VLAN.
| ||||
| CdaiVlanIndex | 1.3.6.1.4.1.259.6.10.94.1.56.2.1.1.1 | VlanIndex | NA | |
column · VlanIndex · not-accessible · current This object indicates the VLAN ID on which dynamic ARP inspection is configured. | ||||
| CdaiVlanStatus | 1.3.6.1.4.1.259.6.10.94.1.56.2.1.1.2 | EnabledStatus | RW | |
column · EnabledStatus · read-write · current This object indicates whether dynamic ARP inspection is enabled in this VLAN. | ||||
| CdaiVlanArpAclName | 1.3.6.1.4.1.259.6.10.94.1.56.2.1.1.3 | DisplayString (SIZE (0..15)) | RW | |
column · DisplayString (SIZE (0..15)) · read-write · current Specifies the ARP ACL name bound to the interface. The default value of daiVlanArpAclStatus is dynamic(2). | ||||
| CdaiVlanArpAclStatus | 1.3.6.1.4.1.259.6.10.94.1.56.2.1.1.4 | INTEGER | RW | |
column · INTEGER · read-write · current Set to static(1) means packets not matching the ACL are dropped. Set to dynamic(2) means packets not matching the ACL are validated by the DHCP snooping binding table. When daiVlanArpAclName is configured, the default value of daiVlanArpAclStatus is dynamic(2).
| ||||
| NdaiInterface | 1.3.6.1.4.1.259.6.10.94.1.56.3 | |||
| TdaiPortTable | 1.3.6.1.4.1.259.6.10.94.1.56.3.1 | NA | ||
table · not-accessible · current A table containing dynamic ARP inspection configurations for port interfaces. | ||||
| RdaiPortEntry | 1.3.6.1.4.1.259.6.10.94.1.56.3.1.1 | NA | ||
row · not-accessible · current An instance containing the configuration of dynamic ARP inspection at each port interface.
| ||||
| CdaiPortIfIndex | 1.3.6.1.4.1.259.6.10.94.1.56.3.1.1.1 | InterfaceIndex | NA | |
column · InterfaceIndex · not-accessible · current The ifIndex value of the port. | ||||
| CdaiPortTrustStatus | 1.3.6.1.4.1.259.6.10.94.1.56.3.1.1.2 | EnabledStatus | RW | |
column · EnabledStatus · read-write · current This object indicates whether the port is trusted for dynamic ARP inspection. | ||||
| CdaiPortRateLimit | 1.3.6.1.4.1.259.6.10.94.1.56.3.1.1.3 | Unsigned32 (0..2048 | 4294967295) | RW | |
column · Unsigned32 (0..2048 | 4294967295) · read-write · current The value of rate limit threshold per second of disposing ARP messages. Set the value 0xFFFFFFFF as no rate limit. | ||||
| NdaiLog | 1.3.6.1.4.1.259.6.10.94.1.56.4 | |||
| TdaiLogTable | 1.3.6.1.4.1.259.6.10.94.1.56.4.1 | NA | ||
table · not-accessible · current A table containing dynamic ARP inspection log information. | ||||
| RdaiLogEntry | 1.3.6.1.4.1.259.6.10.94.1.56.4.1.1 | NA | ||
row · not-accessible · current An instance containing log information of dynamic ARP inspection at each VLAN interface.
| ||||
| CdaiLogIndex | 1.3.6.1.4.1.259.6.10.94.1.56.4.1.1.1 | Integer32 | NA | |
column · Integer32 · not-accessible · current This object indicates the index of dynamic ARP inspection log information. | ||||
| CdaiLogVlan | 1.3.6.1.4.1.259.6.10.94.1.56.4.1.1.2 | VlanIndex | RO | |
column · VlanIndex · read-only · current This object indicates the VLAN ID of dynamic ARP inspection log information. | ||||
| CdaiLogPort | 1.3.6.1.4.1.259.6.10.94.1.56.4.1.1.3 | InterfaceIndex | RO | |
column · InterfaceIndex · read-only · current This object indicates the ifIndex of dynamic ARP inspection log information. | ||||
| CdaiLogSrcIpAddress | 1.3.6.1.4.1.259.6.10.94.1.56.4.1.1.4 | IpAddress | RO | |
column · IpAddress · read-only · current The source IP address of dynamic ARP inspection log information. | ||||
| CdaiLogDestIpAddress | 1.3.6.1.4.1.259.6.10.94.1.56.4.1.1.5 | IpAddress | RO | |
column · IpAddress · read-only · current The destination IP address of dynamic ARP inspection log information. | ||||
| CdaiLogSrcMacAddress | 1.3.6.1.4.1.259.6.10.94.1.56.4.1.1.6 | MacAddress | RO | |
column · MacAddress · read-only · current The source MAC address of dynamic ARP inspection log information. | ||||
| CdaiLogDestMacAddress | 1.3.6.1.4.1.259.6.10.94.1.56.4.1.1.7 | MacAddress | RO | |
column · MacAddress · read-only · current The destination MAC address of dynamic ARP inspection log information. | ||||
| NdaiStatistics | 1.3.6.1.4.1.259.6.10.94.1.56.5 | |||
| SdaiTotalReceivedPkts | 1.3.6.1.4.1.259.6.10.94.1.56.5.1 | Counter32 | RO | |
scalar · Counter32 · read-only · current Indicates the total number of ARP packets received before rate limiting. | ||||
| SdaiTotalDroppedPkts | 1.3.6.1.4.1.259.6.10.94.1.56.5.2 | Counter32 | RO | |
scalar · Counter32 · read-only · current Indicates the total number of ARP packets dropped due to rate limt. | ||||
| SdaiTotalProcessedPkts | 1.3.6.1.4.1.259.6.10.94.1.56.5.3 | Counter32 | RO | |
scalar · Counter32 · read-only · current Indicates the total number of ARP packets processed by ARP inspection. | ||||
| SdaiTotalSrcMacDroppedPkts | 1.3.6.1.4.1.259.6.10.94.1.56.5.4 | Counter32 | RO | |
scalar · Counter32 · read-only · current Indicates the total number of ARP packets dropped by source MAC address validation. | ||||
| SdaiTotalDestMacDroppedPkts | 1.3.6.1.4.1.259.6.10.94.1.56.5.5 | Counter32 | RO | |
scalar · Counter32 · read-only · current Indicates the total number of ARP packets dropped by destination MAC address validation. | ||||
| SdaiTotalIpAddrDroppedPkts | 1.3.6.1.4.1.259.6.10.94.1.56.5.6 | Counter32 | RO | |
scalar · Counter32 · read-only · current Indicates the total number of ARP packets dropped by IP address validation. | ||||
| SdaiTotalArpAclDroppedPkts | 1.3.6.1.4.1.259.6.10.94.1.56.5.7 | Counter32 | RO | |
scalar · Counter32 · read-only · current Indicates the total number of ARP packets dropped by ARP ACL. | ||||
| SdaiTotalDhcpSnoopingDroppedPkts | 1.3.6.1.4.1.259.6.10.94.1.56.5.8 | Counter32 | RO | |
scalar · Counter32 · read-only · current Indicates the total number of ARP packets dropped by DHCP snooping. | ||||
| NerpsMgt | 1.3.6.1.4.1.259.6.10.94.1.62 | |||
| SerpsGlobalStatus | 1.3.6.1.4.1.259.6.10.94.1.62.1 | INTEGER | RW | |
scalar · INTEGER · read-write · current Configures the ERPS function for an entire switch. Note that the ERPS domain will not take effect unless it becomes active and the global status is enabled.
| ||||
| TerpsDomainTable | 1.3.6.1.4.1.259.6.10.94.1.62.2 | NA | ||
table · not-accessible · current Table for ERPS domain configuration. | ||||
| RerpsDomainEntry | 1.3.6.1.4.1.259.6.10.94.1.62.2.1 | NA | ||
| CerpsDomainIndex | 1.3.6.1.4.1.259.6.10.94.1.62.2.1.1 | Integer32 (1..2) | NA | |
column · Integer32 (1..2) · not-accessible · current An index that uniquely identifies an entry in the erpsDomainTable. | ||||
| CerpsDomainName | 1.3.6.1.4.1.259.6.10.94.1.62.2.1.2 | DisplayString (SIZE (1..12)) | RC | |
column · DisplayString (SIZE (1..12)) · read-create · current The domain name that uniquely identifies an entry in the erpsDomainTable. | ||||
| CerpsDomainMegLevel | 1.3.6.1.4.1.259.6.10.94.1.62.2.1.3 | INTEGER (0..7) | RC | |
column · INTEGER (0..7) · read-create · current Configures the maintenance entity group (MEG) level which is used to provide a communication channel for ring automatic protection switching (R-APS) information. | ||||
| CerpsDomainNodeId | 1.3.6.1.4.1.259.6.10.94.1.62.2.1.4 | MacAddress | RC | |
column · MacAddress · read-create · current Configures the node id whcih is a MAC address unique to the ring node. | ||||
| CerpsDomainWestRingPort | 1.3.6.1.4.1.259.6.10.94.1.62.2.1.5 | Integer32 | RC | |
column · Integer32 · read-create · current Each node on the ring connects to the ring through two ports. As part of the protection switching scheme, one port can be configured as the west port for the specified domain. The east port and west port can not be configured as the same port. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex in the IF-MIB. A value of 0 means no west ring port configured for this domain. | ||||
| CerpsDomainEastRingPort | 1.3.6.1.4.1.259.6.10.94.1.62.2.1.6 | Integer32 | RC | |
column · Integer32 · read-create · current Each node on the ring connects to the ring through two ports. As part of the protection switching scheme, one port can be configured as the east port for the specified domain. The east port and west port can not be configured as the same port. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex in the IF-MIB. A value of 0 means no east ring port configured for this domain. | ||||
| CerpsDomainRplOwner | 1.3.6.1.4.1.259.6.10.94.1.62.2.1.7 | INTEGER | RC | |
column · INTEGER · read-create · current Set to enabled(1) to make this node act as a RPL owner.
| ||||
| CerpsDomainRplPort | 1.3.6.1.4.1.259.6.10.94.1.62.2.1.8 | INTEGER | RO | |
column · INTEGER · read-only · current This value displays the port for ring protection link which under normal conditions, i.e., without any failure or request, is blocked for traffic channel, to prevent the formation of loops.
| ||||
| CerpsDomainGuardTimer | 1.3.6.1.4.1.259.6.10.94.1.62.2.1.9 | Integer32 (10..2000) | RC | |
column · Integer32 (10..2000) · read-create · current Configures the value of the guard timer which is used to prevent ring nodes from receiving outdated R-APS messages. The range is in 10 ms steps between 10 ms and 2 seconds, with a default value of 500 ms. | ||||
| CerpsDomainHoldoffTimer | 1.3.6.1.4.1.259.6.10.94.1.62.2.1.10 | Integer32 (0..10000) | RC | |
column · Integer32 (0..10000) · read-create · current Configures the value of the holdoff timer which is used to prevent reporting error event immediately to protection switching if the provisioned holdoff timer value is non-zero. The range is in 100 ms steps between 0 and 10 seconds, with a default value of 0 ms. | ||||
| CerpsDomainWtrTimer | 1.3.6.1.4.1.259.6.10.94.1.62.2.1.11 | Integer32 (5..12) | RC | |
column · Integer32 (5..12) · read-create · current Configures the value of the wait-to-restore timer which is used by the RPL owner node to prevent frequent switching operations that may be caused by intermittent failures. The range is in 1 minute steps between 5 and 12 minutes with a default value of 5 minutes. This object will not take effect for the non RPL owner node. | ||||
| CerpsDomainControlVlanID | 1.3.6.1.4.1.259.6.10.94.1.62.2.1.12 | Integer32 | RC | |
column · Integer32 · read-create · current This is defined as dot1qVlanIndex in the Q-BRIDGE-MIB. Configures one control VLAN for each ERPS domain. The control VLAN is used only to send and receive ERPS message. A control VLAN can not belong to more than one ERPS domain. A value of 0 means no control VLAN configured for this domain. | ||||
| CerpsDomainNodeState | 1.3.6.1.4.1.259.6.10.94.1.62.2.1.13 | INTEGER | RO | |
column · INTEGER · read-only · current This value displays the node's current state.
It displays one of the following states
(1). init -- The node is in the init state.
(The node state will stay in init state, if global status
or domain status is not enabled.)
(2). idle -- The node is in idle state (i.e., no detected
failures, and receiving only 'NR, RB' R-APS frames).
(3). protection -- The node is in protection state.
| ||||
| CerpsDomainWestRingPortState | 1.3.6.1.4.1.259.6.10.94.1.62.2.1.14 | INTEGER | RO | |
column · INTEGER · read-only · current This value displays the west ring port's current state.
It displays one of the following states
(1). unknown -- The port's current state is unknown.
(The port's current state will stay in unknown state
if the node's current state is in init state.)
(2). blocking -- The transmission and reception of traffic
are blocked.
(3). forwarding -- The traffic can be transmitted and received
normally.
| ||||
| CerpsDomainEastRingPortState | 1.3.6.1.4.1.259.6.10.94.1.62.2.1.15 | INTEGER | RO | |
column · INTEGER · read-only · current This value displays the east ring port's current state.
It displays one of the following states
(1). unknown -- The port's current state is unknown.
(The port's current state will stay in unknown state
if the node's current state is in init state.)
(2). blocking -- The transmission and reception of traffic
are blocked.
(3). forwarding -- The traffic can be transmitted and received
normally.
| ||||
| CerpsDomainRowStatus | 1.3.6.1.4.1.259.6.10.94.1.62.2.1.16 | RowStatus | RC | |
column · RowStatus · read-create · current The status of this conceptual row entry. This object is used to manage the creation and deletion of conceptual rows. The status column has six defined values: - 'active', which indicates that the conceptual row is available for use by the managed device; - 'notInService', which indicates that the conceptual row exists in the agent, but is unavailable for use by the managed device (see NOTE below); - 'notReady', which indicates that the conceptual row exists in the agent, but is missing information necessary in order to be available for use by the managed device; - 'createAndGo', which is supplied by a management station wishing to create a new instance of a conceptual row and to have its status automatically set to active, making it available for use by the managed device; - 'createAndWait', which is supplied by a management station wishing to create a new instance of a conceptual row (but not make it available for use by the managed device); and, - 'destroy', which is supplied by a management station wishing to delete all of the instances associated with an existing conceptual row. Whereas five of the six values (all except 'notReady') may be specified in a management protocol set operation, only three values will be returned in response to a management protocol retrieval operation: 'notReady', 'notInService' or 'active'. That is, when queried, an existing conceptual row has only three states: it is either available for use by the managed device (the status column has value 'active'); it is not available for use by the managed device, though the agent has sufficient information to make it so (the status column has value 'notInService'); or, it is not available for use by the managed device, and an attempt to make it so would fail because the agent has insufficient information (the state column has value 'notReady'). For a detailed description of this object, please refer to SNMPv2-TC MIB. Note that other objects can not be modified when the status is active. | ||||
| CerpsDomainMajorDomainIndex | 1.3.6.1.4.1.259.6.10.94.1.62.2.1.17 | Integer32 | RC | |
column · Integer32 · read-create · current An index that uniquely identifies an entry in the
erpsDomainTable. A value of 0 means this domain has no major
domain.
Notes: This objest can not be configured if
erpsDomainRingPortEast has a vaule other than 0. | ||||
| CerpsDomainPropagateTC | 1.3.6.1.4.1.259.6.10.94.1.62.2.1.18 | INTEGER | RC | |
column · INTEGER · read-create · current Set to enabled(1) to transmit topology change signal to the major domain. It will not take effect, if erpsDomainMajorDomainIndex has a value of 0.
| ||||
| CerpsDomainWestMepId | 1.3.6.1.4.1.259.6.10.94.1.62.2.1.20 | Integer32 (0..8191) | RC | |
column · Integer32 (0..8191) · read-create · current Configures a CFM Down MEP on west ring port. A down MEP can be uniquely select by given a MEPID, domain's MEG level, and domain's control VLAN ID. A value of 0 means no west MEP is not configured for this domain. | ||||
| CerpsDomainEastMepId | 1.3.6.1.4.1.259.6.10.94.1.62.2.1.21 | Integer32 (0..8191) | RC | |
column · Integer32 (0..8191) · read-create · current Configures a CFM Down MEP on east ring port. A down MEP can be uniquely select by given a MEPID, domain's MEG level, and domain's control VLAN ID. A value of 0 means no east MEP is not configured for this domain. | ||||
| CerpsDomainNonErpsDevProtect | 1.3.6.1.4.1.259.6.10.94.1.62.2.1.22 | INTEGER | RC | |
column · INTEGER · read-create · current Set to enabled(1) to use non-standard protection mechanism for network containing non-ERPS devices.
| ||||
| NlbdMgt | 1.3.6.1.4.1.259.6.10.94.1.63 | |||
| NlbdGlobal | 1.3.6.1.4.1.259.6.10.94.1.63.1 | |||
| SlbdGlobalStatus | 1.3.6.1.4.1.259.6.10.94.1.63.1.1 | INTEGER | RW | |
scalar · INTEGER · read-write · current Set enabled(1) to enable global LBD status. Set disabled(2) to disable global LBD status.
| ||||
| SlbdTransmitInterval | 1.3.6.1.4.1.259.6.10.94.1.63.1.2 | Unsigned32 (1..32767) | RW | |
scalar · Unsigned32 (1..32767) · read-write · current The transmission interval for LBD control frames. | ||||
| SlbdRecoverTime | 1.3.6.1.4.1.259.6.10.94.1.63.1.3 | Unsigned32 (0 | 60..1000000) | RW | |
scalar · Unsigned32 (0 | 60..1000000) · read-write · current The recover time used by LBD auto recovery mechanism. A value of 0 disables auto recovery. | ||||
| SlbdMode | 1.3.6.1.4.1.259.6.10.94.1.63.1.4 | INTEGER | RW | |
scalar · INTEGER · read-write · current The detection mode of LBD.
| ||||
| NlbdInterface | 1.3.6.1.4.1.259.6.10.94.1.63.2 | |||
| TlbdPortTable | 1.3.6.1.4.1.259.6.10.94.1.63.2.1 | NA | ||
table · not-accessible · current A table containing LBD configurations for all interfaces. | ||||
| RlbdPortEntry | 1.3.6.1.4.1.259.6.10.94.1.63.2.1.1 | NA | ||
row · not-accessible · current An instance containing the configuration of LBD at each interface.
| ||||
| ClbdPortIfIndex | 1.3.6.1.4.1.259.6.10.94.1.63.2.1.1.1 | InterfaceIndex | NA | |
column · InterfaceIndex · not-accessible · current The ifIndex value of the port. | ||||
| ClbdPortAdminState | 1.3.6.1.4.1.259.6.10.94.1.63.2.1.1.2 | INTEGER | RW | |
column · INTEGER · read-write · current The LBD administrative port status.
| ||||
| ClbdPortOperState | 1.3.6.1.4.1.259.6.10.94.1.63.2.1.1.3 | INTEGER | RO | |
column · INTEGER · read-only · current The LBD operative port status.
| ||||
| ClbdPortLoopedVlan | 1.3.6.1.4.1.259.6.10.94.1.63.2.1.1.4 | OCTET STRING (SIZE (0..512)) | RO | |
column · OCTET STRING (SIZE (0..512)) · read-only · current The list of VLANs on which loopback is detected. Only when oper state is looped and mode is VLAN-based, the value is nonzero. | ||||
| Nes3528moNotifications | 1.3.6.1.4.1.259.6.10.94.2 | |||
| Nes3528moTraps | 1.3.6.1.4.1.259.6.10.94.2.1 | |||
| Nes3528moTrapsPrefix | 1.3.6.1.4.1.259.6.10.94.2.1.0 | |||
| !swPowerStatusChangeTrap | 1.3.6.1.4.1.259.6.10.94.2.1.0.1 | |||
notification · current This trap is sent when the power state changes. | ||||
| !swPortSecurityTrap | 1.3.6.1.4.1.259.6.10.94.2.1.0.36 | |||
notification · current This trap is sent when the port is being intruded. This trap will only be sent when the portSecActionTrap is enabled.
| ||||
| !swIpFilterRejectTrap | 1.3.6.1.4.1.259.6.10.94.2.1.0.40 | |||
notification · current This trap is sent when an incorrect IP address is rejected by the ipfilter. | ||||
| !swAuthenticationFailure | 1.3.6.1.4.1.259.6.10.94.2.1.0.66 | |||
notification · current This trap will be triggered if authentication is failed. | ||||
| !swAuthenticationSuccess | 1.3.6.1.4.1.259.6.10.94.2.1.0.67 | |||
notification · current This trap will be triggered if authentication is successful. | ||||
| !swAtcBcastStormAlarmFireTrap | 1.3.6.1.4.1.259.6.10.94.2.1.0.70 | |||
notification · current When the broadcast traffic is detected as the storm, this trap will be fired. | ||||
| !swAtcBcastStormAlarmClearTrap | 1.3.6.1.4.1.259.6.10.94.2.1.0.71 | |||
notification · current When the broadcast storm is detected as the normal traffic, this trap will be fired. | ||||
| !swAtcBcastStormTcApplyTrap | 1.3.6.1.4.1.259.6.10.94.2.1.0.72 | |||
notification · current When the ATC is activated, this trap will be fired. | ||||
| !swAtcBcastStormTcReleaseTrap | 1.3.6.1.4.1.259.6.10.94.2.1.0.73 | |||
notification · current When the ATC is released, this trap will be fired. | ||||
| !swAtcMcastStormAlarmFireTrap | 1.3.6.1.4.1.259.6.10.94.2.1.0.74 | |||
notification · current When the multicast traffic is detected as the storm, this trap will be fired. | ||||
| !swAtcMcastStormAlarmClearTrap | 1.3.6.1.4.1.259.6.10.94.2.1.0.75 | |||
notification · current When the multicast storm is detected as the normal traffic, this trap will be fired. | ||||
| !swAtcMcastStormTcApplyTrap | 1.3.6.1.4.1.259.6.10.94.2.1.0.76 | |||
notification · current When the ATC is activated, this trap will be fired. | ||||
| !swAtcMcastStormTcReleaseTrap | 1.3.6.1.4.1.259.6.10.94.2.1.0.77 | |||
notification · current When the ATC is released, this trap will be fired. | ||||
| !swLoopbackDetectionTrap | 1.3.6.1.4.1.259.6.10.94.2.1.0.92 | |||
notification · current This trap will be sent when loopback BPDUs have been detected. | ||||
| !networkAccessPortLinkDetectionTrap | 1.3.6.1.4.1.259.6.10.94.2.1.0.96 | |||
notification · current This trap is sent when a networkAccessPortLinkDetection event is triggered. | ||||
| !dot1agCfmMepUpTrap | 1.3.6.1.4.1.259.6.10.94.2.1.0.97 | |||
notification · current This trap is sent when a new remote MEP is discovered.
| ||||
| !dot1agCfmMepDownTrap | 1.3.6.1.4.1.259.6.10.94.2.1.0.98 | |||
notification · current This trap is sent when port status or interface status TLV received from remote MEP indicates it is not up.
| ||||
| !dot1agCfmConfigFailTrap | 1.3.6.1.4.1.259.6.10.94.2.1.0.99 | |||
notification · current This trap is sent when a MEP receives a CCM with MPID which already exists on the same MA in this switch.
| ||||
| !dot1agCfmLoopFindTrap | 1.3.6.1.4.1.259.6.10.94.2.1.0.100 | |||
notification · current This trap is sent when a MEP receives its own CCMs.
| ||||
| !dot1agCfmMepUnknownTrap | 1.3.6.1.4.1.259.6.10.94.2.1.0.101 | |||
notification · current This trap is sent when a CCM is received from an unexpected MEP.
| ||||
| !dot1agCfmMepMissingTrap | 1.3.6.1.4.1.259.6.10.94.2.1.0.102 | |||
notification · current This trap is sent when the cross-check enable timer expires and no CCMs were received from an expected (configured) MEP.
| ||||
| !dot1agCfmMaUpTrap | 1.3.6.1.4.1.259.6.10.94.2.1.0.103 | |||
notification · current This trap is sent when all expected remote MEPs are up.
| ||||
| !autoUpgradeTrap | 1.3.6.1.4.1.259.6.10.94.2.1.0.104 | |||
notification · current This trap is sent when auto upgrade is executed. | ||||
| !swCpuUtiRisingNotification | 1.3.6.1.4.1.259.6.10.94.2.1.0.107 | |||
notification · current This notification indicates that the CPU utilization has risen from cpuUtiFallingThreshold to cpuUtiRisingThreshold. | ||||
| !swCpuUtiFallingNotification | 1.3.6.1.4.1.259.6.10.94.2.1.0.108 | |||
notification · current This notification indicates that the CPU utilization has fallen from cpuUtiRisingThreshold to cpuUtiFallingThreshold. | ||||
| !swMemoryUtiRisingThresholdNotification | 1.3.6.1.4.1.259.6.10.94.2.1.0.109 | |||
notification · current This notification indicates that the memory utilization has risen from memoryUtiFallingThreshold to memoryUtiRisingThreshold. | ||||
| !swMemoryUtiFallingThresholdNotification | 1.3.6.1.4.1.259.6.10.94.2.1.0.110 | |||
notification · current This notification indicates that the memory utilization has fallen from memoryUtiRisingThreshold to memoryUtiFallingThreshold. | ||||
| !dhcpRougeServerAttackTrap | 1.3.6.1.4.1.259.6.10.94.2.1.0.114 | |||
notification · current This trap is sent when receiving a DHCP packet from a rouge server. | ||||
| !macNotificationTrap | 1.3.6.1.4.1.259.6.10.94.2.1.0.138 | |||
notification · current This trap is sent when there are changes of the dynamic mac on the switch. | ||||
| !lbdDetectionTrap | 1.3.6.1.4.1.259.6.10.94.2.1.0.141 | |||
notification · current This trap is sent when a loopback condition is detected by LBD.
| ||||
| !lbdRecoveryTrap | 1.3.6.1.4.1.259.6.10.94.2.1.0.142 | |||
| Nes3528moConformance | 1.3.6.1.4.1.259.6.10.94.3 | |||
Textual conventions
FileCopyStatusINTEGERfileCopyBusy(17)fileCopyCompleted(31)fileCopyError(29)fileCopyFileSizeExceed(21)fileCopyHeaderChecksumError(24)fileCopyImageChecksumError(25)fileCopyImageTypeError(23)fileCopyMagicWordError(22)fileCopyParaError(16)fileCopyReadFileError(19)fileCopySetStartupError(20)fileCopySuccess(30)fileCopyTftpAccessViolation(3)fileCopyTftpCompleted(15)fileCopyTftpDiskFull(4)fileCopyTftpFileExisted(7)fileCopyTftpFileNotFound(2)fileCopyTftpIllegalOperation(5)fileCopyTftpNoSuchUser(8)fileCopyTftpReceiverError(11)fileCopyTftpSendError(10)fileCopyTftpSocketBindError(13)fileCopyTftpSocketOpenError(12)fileCopyTftpTimeout(9)fileCopyTftpUndefError(1)fileCopyTftpUnkownTransferId(6)fileCopyTftpUserCancel(14)fileCopyUnknown(18)fileCopyWriteFlashError(27)fileCopyWriteFlashFinish(26)fileCopyWriteFlashProgramming(28)The file copy result status.
KeySegmentDisplayString (SIZE (0..128))The total length of the key is 1024 characters, it is divided into 8 parts and stored in 8 separated mib variables as below: Key1: part 1 of the key (1-128) Key2: part 2 of the key (129-256) Key3: part 3 of the key (257-384) Key4: part 4 of the key (385-512) Key5: part 5 of the key (513-640) Key6: part 6 of the key (641-768) Key7: part 7 of the key (769-896) Key8: part 8 of the key (897-1024) Please note that if the key string is less then 1024 characters, the remaining part of the string will be filled by a zero-length string. For example, if the length of the key is 129, we will get a string of length 128 in Key1, and a string of length 1 in Key2, moreover, Key3 to Key8 will all be zero-length strings.StaPathCostModeINTEGERlong(2)short(1)The path cost mode of a spanning tree algorithm, short(1) indicates that we retrieve/configure the spanning tree path cost as a 16 bit value and long(2) indicates that we retrieve/configure the spanning tree path cost as a 32 bit value.
ValidStatusINTEGERinvalid(2)valid(1)A simple status value for the object to create and destroy a table entry. This is a simplified variant of RowStatus as it supports only two values. Setting it to valid(1) creates an entry. Setting it to invalid(2) destroys an entry.
Traps / Notifications
- autoUpgradeTrap
1.3.6.1.4.1.259.6.10.94.2.1.0.104 - dhcpRougeServerAttackTrap
1.3.6.1.4.1.259.6.10.94.2.1.0.114 - dot1agCfmConfigFailTrap
1.3.6.1.4.1.259.6.10.94.2.1.0.99 - dot1agCfmLoopFindTrap
1.3.6.1.4.1.259.6.10.94.2.1.0.100 - dot1agCfmMaUpTrap
1.3.6.1.4.1.259.6.10.94.2.1.0.103 - dot1agCfmMepDownTrap
1.3.6.1.4.1.259.6.10.94.2.1.0.98 - dot1agCfmMepMissingTrap
1.3.6.1.4.1.259.6.10.94.2.1.0.102 - dot1agCfmMepUnknownTrap
1.3.6.1.4.1.259.6.10.94.2.1.0.101 - dot1agCfmMepUpTrap
1.3.6.1.4.1.259.6.10.94.2.1.0.97 - lbdDetectionTrap
1.3.6.1.4.1.259.6.10.94.2.1.0.141 - lbdRecoveryTrap
1.3.6.1.4.1.259.6.10.94.2.1.0.142 - macNotificationTrap
1.3.6.1.4.1.259.6.10.94.2.1.0.138 - networkAccessPortLinkDetectionTrap
1.3.6.1.4.1.259.6.10.94.2.1.0.96 - swAtcBcastStormAlarmClearTrap
1.3.6.1.4.1.259.6.10.94.2.1.0.71 - swAtcBcastStormAlarmFireTrap
1.3.6.1.4.1.259.6.10.94.2.1.0.70 - swAtcBcastStormTcApplyTrap
1.3.6.1.4.1.259.6.10.94.2.1.0.72 - swAtcBcastStormTcReleaseTrap
1.3.6.1.4.1.259.6.10.94.2.1.0.73 - swAtcMcastStormAlarmClearTrap
1.3.6.1.4.1.259.6.10.94.2.1.0.75 - swAtcMcastStormAlarmFireTrap
1.3.6.1.4.1.259.6.10.94.2.1.0.74 - swAtcMcastStormTcApplyTrap
1.3.6.1.4.1.259.6.10.94.2.1.0.76 - swAtcMcastStormTcReleaseTrap
1.3.6.1.4.1.259.6.10.94.2.1.0.77 - swAuthenticationFailure
1.3.6.1.4.1.259.6.10.94.2.1.0.66 - swAuthenticationSuccess
1.3.6.1.4.1.259.6.10.94.2.1.0.67 - swCpuUtiFallingNotification
1.3.6.1.4.1.259.6.10.94.2.1.0.108 - swCpuUtiRisingNotification
1.3.6.1.4.1.259.6.10.94.2.1.0.107 - swIpFilterRejectTrap
1.3.6.1.4.1.259.6.10.94.2.1.0.40 - swLoopbackDetectionTrap
1.3.6.1.4.1.259.6.10.94.2.1.0.92 - swMemoryUtiFallingThresholdNotification
1.3.6.1.4.1.259.6.10.94.2.1.0.110 - swMemoryUtiRisingThresholdNotification
1.3.6.1.4.1.259.6.10.94.2.1.0.109 - swPortSecurityTrap
1.3.6.1.4.1.259.6.10.94.2.1.0.36 - swPowerStatusChangeTrap
1.3.6.1.4.1.259.6.10.94.2.1.0.1