ECS4610-24F-MIB
ACCTON TechnologyThe MIB module for ECS4610-24F.
snmptranslate -m ECS4610-24F-MIB -Tpsnmpwalk -v2c -c <community> -m ECS4610-24F-MIB <host> 1.3.6.1.4.1.259.10.1.5Imports
| BRIDGE-MIB | BridgeId, Timeout, dot1dStpPort, dot1dStpPortEntry |
|---|---|
| DIFFSERV-MIB | IndexInteger, IndexIntegerNextFree, diffServClfrEntry, diffServMultiFieldClfrEntry |
| IEEE8021-PAE-MIB | dot1xAuthConfigEntry |
| IF-MIB | InterfaceIndex, InterfaceIndexOrZero, ifIndex |
| INET-ADDRESS-MIB | InetAddress, InetAddressIPv6, InetAddressPrefixLength, InetAddressType |
| OSPF-MIB | Metric, TOSType |
| P-BRIDGE-MIB | EnabledStatus |
| Q-BRIDGE-MIB | PortList, VlanId, VlanIndex |
| SNMP-FRAMEWORK-MIB | SnmpAdminString |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
| SNMPv2-SMI | Bits, Counter32, Counter64, Gauge32, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, enterprises, iso, private |
| SNMPv2-TC | DisplayString, PhysAddress, RowPointer, RowStatus, TEXTUAL-CONVENTION, TruthValue |
| TOKEN-RING-RMON-MIB | MacAddress |
OID tree
| Name | OID | Type | Access | Status | Example | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Naccton | 1.3.6.1.4.1.259 | ||||||||||||
| Nedgecorenetworks | 1.3.6.1.4.1.259.10 | ||||||||||||
| NedgeCoreNetworksMgt | 1.3.6.1.4.1.259.10.1 | ||||||||||||
| Iecs4610-24fMIB | 1.3.6.1.4.1.259.10.1.5 | ||||||||||||
identity The MIB module for ECS4610-24F. | |||||||||||||
| Necs4610-24fMIBObjects | 1.3.6.1.4.1.259.10.1.5.1 | ||||||||||||
| NswitchMgt | 1.3.6.1.4.1.259.10.1.5.1.1 | ||||||||||||
| SswitchNumber | 1.3.6.1.4.1.259.10.1.5.1.1.2 | Integer32 | RO | ||||||||||
scalar · Integer32 · read-only · current The total number of switches present on this system. | |||||||||||||
| TswitchInfoTable | 1.3.6.1.4.1.259.10.1.5.1.1.3 | NA | |||||||||||
table · not-accessible · current Table of descriptive and status information about the switch units in this system. | |||||||||||||
| RswitchInfoEntry | 1.3.6.1.4.1.259.10.1.5.1.1.3.1 | NA | |||||||||||
row · not-accessible · current Table providing descriptions and status information for switch units.
| |||||||||||||
| CswUnitIndex | 1.3.6.1.4.1.259.10.1.5.1.1.3.1.1 | Integer32 | NA | ||||||||||
column · Integer32 · not-accessible · current This object identifies the switch within the system for which this entry contains information. This value can never be greater than switchNumber. | |||||||||||||
| CswHardwareVer | 1.3.6.1.4.1.259.10.1.5.1.1.3.1.2 | DisplayString (SIZE (0..20)) | RO | R01 | |||||||||
column · DisplayString (SIZE (0..20)) · read-only · current Hardware version of the main board. Example values from LibreNMS test devices
| |||||||||||||
| CswMicrocodeVer | 1.3.6.1.4.1.259.10.1.5.1.1.3.1.3 | DisplayString (SIZE (0..20)) | RO | ||||||||||
column · DisplayString (SIZE (0..20)) · read-only · current Microcode version of the main board. | |||||||||||||
| CswLoaderVer | 1.3.6.1.4.1.259.10.1.5.1.1.3.1.4 | DisplayString (SIZE (0..20)) | RO | ||||||||||
column · DisplayString (SIZE (0..20)) · read-only · current Loader version of the main board. | |||||||||||||
| CswBootRomVer | 1.3.6.1.4.1.259.10.1.5.1.1.3.1.5 | DisplayString (SIZE (0..20)) | RO | ||||||||||
column · DisplayString (SIZE (0..20)) · read-only · current Boot ROM code version of the main board. | |||||||||||||
| CswOpCodeVer | 1.3.6.1.4.1.259.10.1.5.1.1.3.1.6 | DisplayString (SIZE (0..20)) | RO | 1.3.1.16 | |||||||||
column · DisplayString (SIZE (0..20)) · read-only · current Operation code version of the main board. Example values from LibreNMS test devices
| |||||||||||||
| CswPortNumber | 1.3.6.1.4.1.259.10.1.5.1.1.3.1.7 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current The number of ports on this switch. | |||||||||||||
| CswPowerStatus | 1.3.6.1.4.1.259.10.1.5.1.1.3.1.8 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current Indicates the switch using internalPower(1), redundantPower(2) or both(3)
| |||||||||||||
| CswRoleInSystem | 1.3.6.1.4.1.259.10.1.5.1.1.3.1.9 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current Indicates the switch is master(1), backupMaster(2) or slave(3) in this system.
| |||||||||||||
| CswSerialNumber | 1.3.6.1.4.1.259.10.1.5.1.1.3.1.10 | DisplayString (SIZE (0..80)) | RO | EC1210000599 | |||||||||
column · DisplayString (SIZE (0..80)) · read-only · current Serial number of the switch. Example values from LibreNMS test devices
| |||||||||||||
| CswExpansionSlot1 | 1.3.6.1.4.1.259.10.1.5.1.1.3.1.11 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current Type of expansion module in this switch slot 1.
| |||||||||||||
| CswExpansionSlot2 | 1.3.6.1.4.1.259.10.1.5.1.1.3.1.12 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current Type of expansion module in this switch slot 2.
| |||||||||||||
| CswServiceTag | 1.3.6.1.4.1.259.10.1.5.1.1.3.1.13 | DisplayString (SIZE (0..80)) | RO | ||||||||||
column · DisplayString (SIZE (0..80)) · read-only · current Service tag serial-number of the switch. | |||||||||||||
| CswModelNumber | 1.3.6.1.4.1.259.10.1.5.1.1.3.1.14 | DisplayString (SIZE (0..15)) | RO | ||||||||||
column · DisplayString (SIZE (0..15)) · read-only · current Model number of the switch. | |||||||||||||
| CswEpldVer | 1.3.6.1.4.1.259.10.1.5.1.1.3.1.15 | DisplayString (SIZE (0..20)) | RO | ||||||||||
column · DisplayString (SIZE (0..20)) · read-only · current The EPLD version of the switch. | |||||||||||||
| CswExpectedModuleOpCodeVer | 1.3.6.1.4.1.259.10.1.5.1.1.3.1.16 | DisplayString (SIZE (0..15)) | RO | ||||||||||
column · DisplayString (SIZE (0..15)) · read-only · current The module opcode version reside in the switch, note that this variable represent the desired version of the module which might plug in. For version validation, only the swExpectedModuleOpCodeVer of the master is used. This object is compared with the swModuleOpCodeVer of the master and all slaves. | |||||||||||||
| SswitchOperState | 1.3.6.1.4.1.259.10.1.5.1.1.4 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Global operation state of the switch.
| |||||||||||||
| NswitchProductId | 1.3.6.1.4.1.259.10.1.5.1.1.5 | ||||||||||||
| SswProdName | 1.3.6.1.4.1.259.10.1.5.1.1.5.1 | DisplayString (SIZE (0..127)) | RO | ECS4610-24F | |||||||||
scalar · DisplayString (SIZE (0..127)) · read-only · current The product name of this switch. Example values from LibreNMS test devices
| |||||||||||||
| SswProdManufacturer | 1.3.6.1.4.1.259.10.1.5.1.1.5.2 | DisplayString (SIZE (0..127)) | RO | ||||||||||
scalar · DisplayString (SIZE (0..127)) · read-only · current The product manufacturer of this switch. | |||||||||||||
| SswProdDescription | 1.3.6.1.4.1.259.10.1.5.1.1.5.3 | DisplayString (SIZE (0..127)) | RO | ||||||||||
scalar · DisplayString (SIZE (0..127)) · read-only · current The product description of this switch. | |||||||||||||
| SswProdVersion | 1.3.6.1.4.1.259.10.1.5.1.1.5.4 | DisplayString (SIZE (0..127)) | RO | ||||||||||
scalar · DisplayString (SIZE (0..127)) · read-only · current The runtime code version of this switch. | |||||||||||||
| SswProdUrl | 1.3.6.1.4.1.259.10.1.5.1.1.5.5 | DisplayString (SIZE (0..127)) | RO | ||||||||||
scalar · DisplayString (SIZE (0..127)) · read-only · current The URL of this switch, which we can connect through a web browser. | |||||||||||||
| SswIdentifier | 1.3.6.1.4.1.259.10.1.5.1.1.5.6 | Integer32 | RO | ||||||||||
scalar · Integer32 · read-only · current A unique identifier of which switch in the chassis is currently being looked at. | |||||||||||||
| SswChassisServiceTag | 1.3.6.1.4.1.259.10.1.5.1.1.5.7 | DisplayString (SIZE (0..80)) | RO | ||||||||||
scalar · DisplayString (SIZE (0..80)) · read-only · current The service tag of the chassis this switch resides in. | |||||||||||||
| TswitchIndivPowerTable | 1.3.6.1.4.1.259.10.1.5.1.1.6 | NA | |||||||||||
table · not-accessible · current Table about the status of individual powers. | |||||||||||||
| RswitchIndivPowerEntry | 1.3.6.1.4.1.259.10.1.5.1.1.6.1 | NA | |||||||||||
row · not-accessible · current Table about the status of individual power. | |||||||||||||
| CswIndivPowerUnitIndex | 1.3.6.1.4.1.259.10.1.5.1.1.6.1.1 | Integer32 | AN | ||||||||||
column · Integer32 · accessible-for-notify · current This is defined as swUnitIndex. | |||||||||||||
| CswIndivPowerIndex | 1.3.6.1.4.1.259.10.1.5.1.1.6.1.2 | INTEGER | AN | ||||||||||
column · INTEGER · accessible-for-notify · current 1 means internal power, 2 means external power.
| |||||||||||||
| CswIndivPowerStatus | 1.3.6.1.4.1.259.10.1.5.1.1.6.1.3 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current notPresent(1) means not present, green(2) means up, red(3) means down.
| |||||||||||||
| SswitchJumboFrameStatus | 1.3.6.1.4.1.259.10.1.5.1.1.7 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current enable(1) means the Jumbo Frame has enabled, disabled(2) means the Jumbo Frame has disabled.
| |||||||||||||
| NamtrMgt | 1.3.6.1.4.1.259.10.1.5.1.1.8 | ||||||||||||
| SamtrMacAddrAgingStatus | 1.3.6.1.4.1.259.10.1.5.1.1.8.3 | EnabledStatus | RW | ||||||||||
scalar · EnabledStatus · read-write · current If this is enabled(1), the MAC address table will age out according to its timer. If this is disabled(2), the MAC address table will not age out. | |||||||||||||
| SswitchRenumberUnitID | 1.3.6.1.4.1.259.10.1.5.1.1.14 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current The value renumber will automatically assign an ID to units in the stack; all UNIT IDs will be contiguous. The system configurations are not changed but the system will restart after renumbering is completed.
| |||||||||||||
| SswitchSystemJumboMtu | 1.3.6.1.4.1.259.10.1.5.1.1.18 | Integer32 (1500..9216) | RW | ||||||||||
scalar · Integer32 (1500..9216) · read-write · current System jumbo frame size (MTU). | |||||||||||||
| NportMgt | 1.3.6.1.4.1.259.10.1.5.1.2 | ||||||||||||
| TportTable | 1.3.6.1.4.1.259.10.1.5.1.2.1 | NA | |||||||||||
table · not-accessible · current Table of descriptive and status information describing the configuration of each switch port. This table also contains information about each trunk. | |||||||||||||
| RportEntry | 1.3.6.1.4.1.259.10.1.5.1.2.1.1 | NA | |||||||||||
row · not-accessible · current An entry in the table, describing the configuration of one switch port or trunk.
| |||||||||||||
| CportIndex | 1.3.6.1.4.1.259.10.1.5.1.2.1.1.1 | Integer32 | NA | ||||||||||
column · Integer32 · not-accessible · current The port and the trunk (including trunk members) interface of the portTable. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex in the IF-MIB. | |||||||||||||
| CportName | 1.3.6.1.4.1.259.10.1.5.1.2.1.1.2 | DisplayString (SIZE (0..64)) | RW | ||||||||||
column · DisplayString (SIZE (0..64)) · read-write · current The name of the port or trunk. This is the same as ifAlias in the IF-MIB (RFC2863 or later). | |||||||||||||
| CportType | 1.3.6.1.4.1.259.10.1.5.1.2.1.1.3 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current Indicates the port type of the configuration of the switch.
| |||||||||||||
| CportSpeedDpxCfg | 1.3.6.1.4.1.259.10.1.5.1.2.1.1.4 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Configures the speed and duplex mode for a port or trunk,
according to:
halfDuplex10(2) - 10Mbps and half duplex mode
fullDuplex10(3) - 10Mbps and full duplex mode
halfDuplex100(4) - 100Mbps and half duplex mode
fullDuplex100(5) - 100Mbps and full duplex mode
halfDuplex1000(6) - 1000Mbps and half duplex mode
fullDuplex1000(7) - 1000Mbps and full duplex mode
halfDuplex10g(8) - 10g and half duplex mode
fullDuplex10g(9) - 10g and full duplex mode
hundredBaseTX port can be set as:
halfDuplex10(2)
fullDuplex10(3)
halfDuplex100(4)
fullDuplex100(5)
hundredBaseFX port can be set as:
fullDuplex100(5)
thousandBaseSX port can be set as:
fullDuplex1000(7)
thousandBaseLX port can be set as:
fullDuplex1000(7)
thousandBaseT port can be set as:
halfDuplex10(2)
fullDuplex10(3)
halfDuplex100(4)
fullDuplex100(5)
thousandBaseGBIC port can be set as:
fullDuplex1000(7)
thousandBaseSfp port can be set as:
fullDuplex1000(7)
hundredBaseFxScSingleMode port can be set as:
fullDuplex100(5)
hundredBaseFxScMultiMode port can be set as:
fullDuplex100(5)
thousandBaseCX port can be set as:
fullDuplex1000(7)
tenG port can be set as:
halfDuplex10g(8)
fullDuplex10g(9)
The actual operating speed and duplex of the port
is given by portSpeedDpxStatus.
| |||||||||||||
| CportFlowCtrlCfg | 1.3.6.1.4.1.259.10.1.5.1.2.1.1.5 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current (1) Flow control mechanism is enabled with tx and rx pause
mechansim.
If the port type is hundredBaseTX or thousandBaseSX:
When the port is operating in halfDuplex mode, the
port uses backPressure flow control mechanism. When
the port is operating in fullDuplex mode, the port
uses IEEE 802.3x flow control mechanism.
If the port type is hundredBaseFX:
When the port is operating in halfDuplex mode, the
port uses backPressure flow control mechanism. When
the port is operating in fullDuplex mode, Flow
control mechanism will not function.
(2) Flow control mechanism is disabled.
(5) Flow control mechanism is enabled with tx pause
mechanism only.
(6) Flow control mechansim is enabled with rx pause
mechansim only.
Fast ethernet ports can be set as:
enabled(1),
disabled(2).
Gigabit ethernet ports can be set as:
enabled(1),
disabled(2),
tx(5),
rx(6).
The actual flow control mechanism is used given by
portFlowCtrlStatus.
| |||||||||||||
| CportCapabilities | 1.3.6.1.4.1.259.10.1.5.1.2.1.1.6 | Bits | RW | ||||||||||
column · Bits · read-write · current Port or trunk capabilities.
| |||||||||||||
| CportAutonegotiation | 1.3.6.1.4.1.259.10.1.5.1.2.1.1.7 | EnabledStatus | RW | ||||||||||
column · EnabledStatus · read-write · current Whether auto-negotiation is enabled. | |||||||||||||
| CportSpeedDpxStatus | 1.3.6.1.4.1.259.10.1.5.1.2.1.1.8 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current The operating speed and duplex mode of the switched port or trunk. If the entry represents a trunk, the speed is that of its individual members unless the member ports have been inconsistently configured in which case the value is error(1).
| |||||||||||||
| CportFlowCtrlStatus | 1.3.6.1.4.1.259.10.1.5.1.2.1.1.9 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current (2) BackPressure flow control mechanism is used. (3) IEEE 802.3 flow control mechanism is used. (4) Flow control mechanism is disabled. If the entry represents a trunk and the member ports have been inconsistently configured then this value is error(1).
| |||||||||||||
| CportTrunkIndex | 1.3.6.1.4.1.259.10.1.5.1.2.1.1.10 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current The trunk to which this port belongs. A value of 0 means that this port does not belong to any trunk. A value greater than zero means that this port belongs to a trunk in the trunkIndex, defined by the corresponding trunkPorts. | |||||||||||||
| CportComboForcedMode | 1.3.6.1.4.1.259.10.1.5.1.2.1.1.12 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current This determines the running mode of a combo port. For a non-combo port, this variable has a value of none(1), and setting this variable to none(1) has no effect. For a combo port, this has its own valid values not equal to none(1), and setting this variable to none(1) is not allowed. copperForced(2) is set if user want to force this combo port running in copper mode. copperPreferredAuto(3) is obsoleted, and user shall not set this state. sfpForced(4) is set if user want to force this combo port running in fiber mode. sfpPreferredAuto(5) is set if user want to change copper or fiber mode automatically by SFP transceiver present state. If SFP transceiver is present, this combo port will run in fiber mode, and if SFP transceiver is not present, this combo port will run in copper mode.
| |||||||||||||
| CportMtu | 1.3.6.1.4.1.259.10.1.5.1.2.1.1.16 | Unsigned32 (1500..9216) | RW | ||||||||||
column · Unsigned32 (1500..9216) · read-write · current Maximum frame size of port. If the size of the incoming packet is larger than this value, the packet will be discarded. | |||||||||||||
| CportMacAddrLearningStatus | 1.3.6.1.4.1.259.10.1.5.1.2.1.1.17 | EnabledStatus | RW | ||||||||||
column · EnabledStatus · read-write · current Set this variable to enabled(1) to start to learn MAC addresses. Set this variable to disabled(2) to stop to learn MAC addresses. | |||||||||||||
| CportMacAddrLearningCount | 1.3.6.1.4.1.259.10.1.5.1.2.1.1.18 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current The current number of learned MAC addresses. | |||||||||||||
| NcableDiagMgt | 1.3.6.1.4.1.259.10.1.5.1.2.3 | ||||||||||||
| ScableDiagCtlAction | 1.3.6.1.4.1.259.10.1.5.1.2.3.1 | Integer32 | RW | ||||||||||
scalar · Integer32 · read-write · current To execute cable diagnostics on a port, assign cableDiagCtlAction to the value of ifIndex defined by the ifIndex in the IF-MIB. When read, this object always returns 0. | |||||||||||||
| TcableDiagResultTable | 1.3.6.1.4.1.259.10.1.5.1.2.3.2 | NA | |||||||||||
table · not-accessible · current Table for cable diagnostics result. | |||||||||||||
| RcableDiagResultEntry | 1.3.6.1.4.1.259.10.1.5.1.2.3.2.1 | NA | |||||||||||
| CcableDiagResultIfIndex | 1.3.6.1.4.1.259.10.1.5.1.2.3.2.1.1 | Integer32 | NA | ||||||||||
column · Integer32 · not-accessible · current This is defined as the ifIndex. | |||||||||||||
| CcableDiagResultStatusPairA | 1.3.6.1.4.1.259.10.1.5.1.2.3.2.1.2 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current The result of cable diagnostics. If there is no fault on the cable, the value is ok(2). Value notTestedYet(1) means the pair is not tested yet. Value ok(2) means the pair works well. Value open(3) means there is a lack of continuity between pins at each end of the pair. Value short(4) means conductors are short-circuited together on the pair. Value openShort(5) means the pair has open and short issues. Value crosstalk(6) means the pair is incorrectly connected at one end. Value unknown(7) means pair has an error matching none of the above. Value impedanceMismatch(8) means different quality cables connected together. Value failed(9) means test failed. Value notSupported(10) means cable diagnostics is not supported. Value noCable(11) means there is no connected cable.
| |||||||||||||
| CcableDiagResultStatusPairB | 1.3.6.1.4.1.259.10.1.5.1.2.3.2.1.3 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current The result of cable diagnostics. If there is no fault on the cable, the value is ok(2). Value notTestedYet(1) means the pair is not tested yet. Value ok(2) means the pair works well. Value open(3) means there is a lack of continuity between pins at each end of the pair. Value short(4) means conductors are short-circuited together on the pair. Value openShort(5) means the pair has open and short issues. Value crosstalk(6) means the pair is incorrectly connected at one end. Value unknown(7) means pair has an error matching none of the above. Value impedanceMismatch(8) means different quality cables connected together. Value failed(9) means test failed. Value notSupported(10) means cable diagnostics is not supported. Value noCable(11) means there is no connected cable.
| |||||||||||||
| CcableDiagResultStatusPairC | 1.3.6.1.4.1.259.10.1.5.1.2.3.2.1.4 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current The result of cable diagnostics. If there is no fault on the cable, the value is ok(2). Value notTestedYet(1) means the pair is not tested yet. Value ok(2) means the pair works well. Value open(3) means there is a lack of continuity between pins at each end of the pair. Value short(4) means conductors are short-circuited together on the pair. Value openShort(5) means the pair has open and short issues. Value crosstalk(6) means the pair is incorrectly connected at one end. Value unknown(7) means pair has an error matching none of the above. Value impedanceMismatch(8) means different quality cables connected together. Value failed(9) means test failed. Value notSupported(10) means cable diagnostics is not supported. Value noCable(11) means there is no connected cable. If the port is 10/100 type, value of the node should be ignored.
| |||||||||||||
| CcableDiagResultStatusPairD | 1.3.6.1.4.1.259.10.1.5.1.2.3.2.1.5 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current The result of cable diagnostics. If there is no fault on the cable, the value is ok(2). Value notTestedYet(1) means the pair is not tested yet. Value ok(2) means the pair works well. Value open(3) means there is a lack of continuity between pins at each end of the pair. Value short(4) means conductors are short-circuited together on the pair. Value openShort(5) means the pair has open and short issues. Value crosstalk(6) means the pair is incorrectly connected at one end. Value unknown(7) means pair has an error matching none of the above. Value impedanceMismatch(8) means different quality cables connected together. Value failed(9) means test failed. Value notSupported(10) means cable diagnostics is not supported. Value noCable(11) means there is no connected cable. If the port is 10/100 type, value of the node should be ignored.
| |||||||||||||
| CcableDiagResultDistancePairA | 1.3.6.1.4.1.259.10.1.5.1.2.3.2.1.6 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current Displays the fault distance of pair A of the cable in meters. | |||||||||||||
| CcableDiagResultDistancePairB | 1.3.6.1.4.1.259.10.1.5.1.2.3.2.1.7 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current Displays the fault distance of pair B of the cable in meters. | |||||||||||||
| CcableDiagResultDistancePairC | 1.3.6.1.4.1.259.10.1.5.1.2.3.2.1.8 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current Displays the fault distance of pair C of the cable in meters. If the port is 10/100 type, value of the node is zero. | |||||||||||||
| CcableDiagResultDistancePairD | 1.3.6.1.4.1.259.10.1.5.1.2.3.2.1.9 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current Displays the fault distance of pair D of the cable in meters. If the port is 10/100 type, value of the node is zero. | |||||||||||||
| CcableDiagResultDistanceAccuracy | 1.3.6.1.4.1.259.10.1.5.1.2.3.2.1.10 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current Displays the accuracy in meters of the cable testing. | |||||||||||||
| CcableDiagResultTime | 1.3.6.1.4.1.259.10.1.5.1.2.3.2.1.11 | DisplayString (SIZE (0..20)) | RO | ||||||||||
column · DisplayString (SIZE (0..20)) · read-only · current Displays the last time of cable diagnostics. For example, 'Jan 1 02:03:04 2002'. | |||||||||||||
| NloopbackTestMgt | 1.3.6.1.4.1.259.10.1.5.1.2.4 | ||||||||||||
| SloopInternalCtlAction | 1.3.6.1.4.1.259.10.1.5.1.2.4.1 | Integer32 | RW | ||||||||||
scalar · Integer32 · read-write · current To execute internal loopback test on a port, assign loopInternalCtlAction to the value of ifIndex defined by the ifIndex in the IF-MIB. When read, this object always returns 0. | |||||||||||||
| TloopInternalResultTable | 1.3.6.1.4.1.259.10.1.5.1.2.4.2 | NA | |||||||||||
table · not-accessible · current Table for internal loopback test result. | |||||||||||||
| RloopInternalResultEntry | 1.3.6.1.4.1.259.10.1.5.1.2.4.2.1 | NA | |||||||||||
row · not-accessible · current Entry for internal loopback test result. | |||||||||||||
| CloopInternalResultIfIndex | 1.3.6.1.4.1.259.10.1.5.1.2.4.2.1.1 | Integer32 | NA | ||||||||||
column · Integer32 · not-accessible · current This is defined as the ifIndex. | |||||||||||||
| CloopInternalResultStatus | 1.3.6.1.4.1.259.10.1.5.1.2.4.2.1.2 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current The result of internal loopback.
| |||||||||||||
| CloopInternalResultTime | 1.3.6.1.4.1.259.10.1.5.1.2.4.2.1.3 | DisplayString (SIZE (0..20)) | RO | ||||||||||
column · DisplayString (SIZE (0..20)) · read-only · current Displays the last time of internal loopback. For example, 'Jan 1 02:03:04 2002'. | |||||||||||||
| TportUtilTable | 1.3.6.1.4.1.259.10.1.5.1.2.6 | NA | |||||||||||
table · not-accessible · current Dispalys port utilization during recent 300 seconds. | |||||||||||||
| RportUtilEntry | 1.3.6.1.4.1.259.10.1.5.1.2.6.1 | NA | |||||||||||
row · not-accessible · current Dispalys port utilization during recent 300 seconds.
| |||||||||||||
| CportUtilIfIndex | 1.3.6.1.4.1.259.10.1.5.1.2.6.1.1 | Integer32 | NA | ||||||||||
column · Integer32 · not-accessible · current The port and trunk interface of the portUtilTable. The interface identified by a particular value of this index is the same interface identified by the same value of ifIndex in the IF-MIB. | |||||||||||||
| CportInOctetRate | 1.3.6.1.4.1.259.10.1.5.1.2.6.1.2 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current The input octet rate (kbits/sec) of the port. | |||||||||||||
| CportInPacketRate | 1.3.6.1.4.1.259.10.1.5.1.2.6.1.3 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current The input packet rate (pkts/sec) of the port. | |||||||||||||
| CportInUtil | 1.3.6.1.4.1.259.10.1.5.1.2.6.1.4 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current The input utilization of the port, in one per hundred. | |||||||||||||
| CportOutOctetRate | 1.3.6.1.4.1.259.10.1.5.1.2.6.1.5 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current The output octet rate (kbits/sec) of the port. | |||||||||||||
| CportOutPacketRate | 1.3.6.1.4.1.259.10.1.5.1.2.6.1.6 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current The output packet rate (pkts/sec) of the port. | |||||||||||||
| CportOutUtil | 1.3.6.1.4.1.259.10.1.5.1.2.6.1.7 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current The output utilization of the port, in one per hundred. | |||||||||||||
| TportVlanTrunkingTable | 1.3.6.1.4.1.259.10.1.5.1.2.7 | NA | |||||||||||
table · not-accessible · current Configures vlan trunking feature. | |||||||||||||
| RportVlanTrunkingEntry | 1.3.6.1.4.1.259.10.1.5.1.2.7.1 | NA | |||||||||||
| CportVlanTrunkingIfIndex | 1.3.6.1.4.1.259.10.1.5.1.2.7.1.1 | Integer32 | NA | ||||||||||
column · Integer32 · not-accessible · current The port and trunk interface of the portVlanTrunkingTable. The interface identified by a particular value of this index is the same interface identified by the same value of ifIndex in the IF-MIB. | |||||||||||||
| CportVlanTrunkingStatus | 1.3.6.1.4.1.259.10.1.5.1.2.7.1.2 | EnabledStatus | RW | ||||||||||
column · EnabledStatus · read-write · current Whether vlan trunking is enabled(1) or disabled(2). | |||||||||||||
| NtrunkMgt | 1.3.6.1.4.1.259.10.1.5.1.3 | ||||||||||||
| StrunkMaxId | 1.3.6.1.4.1.259.10.1.5.1.3.1 | Integer32 | RO | ||||||||||
scalar · Integer32 · read-only · current The maximum number for a trunk identifier. | |||||||||||||
| StrunkValidNumber | 1.3.6.1.4.1.259.10.1.5.1.3.2 | Integer32 | RO | ||||||||||
scalar · Integer32 · read-only · current The number of valid trunks. | |||||||||||||
| TtrunkTable | 1.3.6.1.4.1.259.10.1.5.1.3.3 | NA | |||||||||||
table · not-accessible · current Table describing the configuration and status of each trunk. | |||||||||||||
| RtrunkEntry | 1.3.6.1.4.1.259.10.1.5.1.3.3.1 | NA | |||||||||||
row · not-accessible · current An entry describing the configuration and status of a particular trunk.
| |||||||||||||
| CtrunkIndex | 1.3.6.1.4.1.259.10.1.5.1.3.3.1.1 | Integer32 | NA | ||||||||||
column · Integer32 · not-accessible · current Identifies the trunk within the switch that is described by the table entry. | |||||||||||||
| CtrunkPorts | 1.3.6.1.4.1.259.10.1.5.1.3.3.1.2 | PortList | RC | ||||||||||
column · PortList · read-create · current The complete set of ports currently associated with this trunk. | |||||||||||||
| CtrunkCreation | 1.3.6.1.4.1.259.10.1.5.1.3.3.1.3 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current A value of static(1) means a statically configured trunk. A value of lacp(2) means an LACP-configured trunk.
| |||||||||||||
| CtrunkStatus | 1.3.6.1.4.1.259.10.1.5.1.3.3.1.4 | ValidStatus | RC | ||||||||||
column · ValidStatus · read-create · current Writing this to valid(1) creates an entry. Writing this to invalid(2) destroys an entry. A trunk created by LACP cannot be manually destroyed or (re)configured. | |||||||||||||
| NlacpMgt | 1.3.6.1.4.1.259.10.1.5.1.4 | ||||||||||||
| TlacpPortTable | 1.3.6.1.4.1.259.10.1.5.1.4.1 | NA | |||||||||||
table · not-accessible · current Table for LACP port configuration. | |||||||||||||
| RlacpPortEntry | 1.3.6.1.4.1.259.10.1.5.1.4.1.1 | NA | |||||||||||
row · not-accessible · current Entry for LACP port configuration. While an entry may exist for a particular port, the port may not support LACP and an attempt to enable LACP may result in failure.
| |||||||||||||
| ClacpPortIndex | 1.3.6.1.4.1.259.10.1.5.1.4.1.1.1 | Integer32 | NA | ||||||||||
column · Integer32 · not-accessible · current The port interface of the lacpPortTable. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex in the IF-MIB. | |||||||||||||
| ClacpPortStatus | 1.3.6.1.4.1.259.10.1.5.1.4.1.1.2 | EnabledStatus | RW | ||||||||||
column · EnabledStatus · read-write · current Whether 802.3ad LACP is enabled. | |||||||||||||
| NstaMgt | 1.3.6.1.4.1.259.10.1.5.1.5 | ||||||||||||
| SstaSystemStatus | 1.3.6.1.4.1.259.10.1.5.1.5.1 | EnabledStatus | RW | ||||||||||
scalar · EnabledStatus · read-write · current Global spanning tree status. (1) Spanning tree protocol is enabled. (2) Spanning tree protocol is disabled. | |||||||||||||
| TstaPortTable | 1.3.6.1.4.1.259.10.1.5.1.5.2 | NA | |||||||||||
table · not-accessible · current The table manages port settings for Spanning Tree Protocol 802.1d, 802.1w or 802.1s depending on the value specified by staProtocolType. | |||||||||||||
| RstaPortEntry | 1.3.6.1.4.1.259.10.1.5.1.5.2.1 | NA | |||||||||||
| CstaPortProtocolMigration | 1.3.6.1.4.1.259.10.1.5.1.5.2.1.3 | TruthValue | RW | ||||||||||
column · TruthValue · read-write · current When operating in RSTP (version 2) mode, writing true(1) to this object forces this port to transmit RSTP BPDUs. Any other operation on this object has no effect and it always returns false(2) when read. | |||||||||||||
| CstaPortOperEdgePort | 1.3.6.1.4.1.259.10.1.5.1.5.2.1.5 | TruthValue | RO | ||||||||||
column · TruthValue · read-only · current The operational value of the edge port parameter. The object is initialized to the value of staPortAdminEdgePort and is set false when a BPDU is received. | |||||||||||||
| CstaPortAdminPointToPoint | 1.3.6.1.4.1.259.10.1.5.1.5.2.1.6 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current The administrative point-to-point status of the LAN segment attached to this port. A value of forceTrue(0) indicates that this port should always be treated as if it is connected to a point-to-point link. A value of forceFalse(1) indicates that this port should be treated as having a shared media connection. A value of auto(2) indicates that this port is considered to have a point-to-point link if it is an Aggregator and all of its members are aggregatable, or if the MAC entity is configured for full duplex operation, either through auto-negotiation or by management means.
| |||||||||||||
| CstaPortOperPointToPoint | 1.3.6.1.4.1.259.10.1.5.1.5.2.1.7 | TruthValue | RO | ||||||||||
column · TruthValue · read-only · current The operational point-to-point status of the LAN segment attached to this port. This indicates whether a port is considered to have a point-to-point connection or not. The value is determined by management or by auto-detection, as described in the staPortAdminPointToPoint object. | |||||||||||||
| CstaPortSystemStatus | 1.3.6.1.4.1.259.10.1.5.1.5.2.1.9 | EnabledStatus | RW | ||||||||||
column · EnabledStatus · read-write · current Per-port spanning tree status. (1) Spanning tree protocol is enabled. (2) Spanning tree protocol is disabled. | |||||||||||||
| CstaPortLongAdminPathCost | 1.3.6.1.4.1.259.10.1.5.1.5.2.1.10 | Integer32 (0..200000000) | RW | ||||||||||
column · Integer32 (0..200000000) · read-write · current The admin value of the RSTP path cost or MST external pathcost. The contribution of this port to the path cost (in 32 bits value) of paths towards the spanning tree root which include this port. This object is used to configure the spanning tree port path cost in the 32-bit value range when the staPathCostMethod is long(2). If the staPathCostMethod is short(1), this mib object is not instantiated. Setting this to 0 means that the path cost is automatically determined. In this case, read staPortLongOperPathCost to get the oper value. | |||||||||||||
| CstaPortLongOperPathCost | 1.3.6.1.4.1.259.10.1.5.1.5.2.1.11 | Integer32 (1..200000000) | RO | ||||||||||
column · Integer32 (1..200000000) · read-only · current The oper value of the RSTP path cost or MST external pathcost. The contribution of this port to the path cost (in 32 bits value) of paths towards the spanning tree root which include this port. This object is used to configure the spanning tree port path cost in the 32-bit value range when the staPathCostMethod is long(2). If the staPathCostMethod is short(1), this mib object is not instantiated. | |||||||||||||
| CstaPortBpduFlooding | 1.3.6.1.4.1.259.10.1.5.1.5.2.1.12 | EnabledStatus | RW | ||||||||||
column · EnabledStatus · read-write · current This parameter is used to configure the capability of BPDUs flooding. | |||||||||||||
| CstaPortBpduGuard | 1.3.6.1.4.1.259.10.1.5.1.5.2.1.15 | EnabledStatus | RW | ||||||||||
column · EnabledStatus · read-write · current A value of enabled(1) indicates that BPDU port guard feature is enabled for each port. A value of disabled(2) indicates that the feature is disabled. | |||||||||||||
| CstaPortAdminEdgePortWithAuto | 1.3.6.1.4.1.259.10.1.5.1.5.2.1.16 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current The administrative value of the edge port parameter. A value of enable(1) indicates that this port should be assumed as an edge-port, a value of disable(2) indicates that this port should be assumed as a non-edge-port and a value of auot (3) indicates this port in RSPT or MSTP mode should be assumed as an edge-port after migration or max age expire without receiving any BPDU and sending BPDU with proposal flag on.
| |||||||||||||
| CstaPortBpduFilter | 1.3.6.1.4.1.259.10.1.5.1.5.2.1.17 | EnabledStatus | RW | ||||||||||
column · EnabledStatus · read-write · current The administrative value of the BPDU filter parameter. A value of enabled(1) indicates that this port will avoid transmitting BPDUs on edge-port and the value of disabled(2) indicates that this port will not avoid transmitting BPDUs on edge-port. | |||||||||||||
| CstaPortRootGuardStatus | 1.3.6.1.4.1.259.10.1.5.1.5.2.1.18 | EnabledStatus | RW | ||||||||||
column · EnabledStatus · read-write · current Specifies the desired status of the root guard. This variable configures the root guard feature to enforce the root bridge placement in the network. | |||||||||||||
| CstaPortBpduGuardAutoRecovery | 1.3.6.1.4.1.259.10.1.5.1.5.2.1.19 | EnabledStatus | RW | ||||||||||
column · EnabledStatus · read-write · current A value of enabled(1) indicates that BPDU port guard auto recovery mechanism is enabled for this port. A value of disabled(2) indicates that the mechanism is disabled. | |||||||||||||
| CstaPortBpduGuardAutoRecoveryInterval | 1.3.6.1.4.1.259.10.1.5.1.5.2.1.20 | Unsigned32 (30..86400) | RW | ||||||||||
column · Unsigned32 (30..86400) · read-write · current The interval in seconds used by BPDU guard auto recovery mechanism. | |||||||||||||
| SstaProtocolType | 1.3.6.1.4.1.259.10.1.5.1.5.3 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current The version of Spanning Tree Protocol the bridge is currently running. The value 'stp(1)' indicates the Spanning Tree Protocol is as specified in IEEE 802.1D,'rstp(2)' indicates that the Rapid Spanning Tree Protocol is as specified in IEEE 802.1w, and the value 'mstp(3)' indicates that the Multiple Spanning Tree Protocol is as specified in IEEE 802.1s. New values may be defined in the future as new or updated versions of the protocol become available.
| |||||||||||||
| SstaTxHoldCount | 1.3.6.1.4.1.259.10.1.5.1.5.4 | Integer32 (1..10) | RW | ||||||||||
scalar · Integer32 (1..10) · read-write · current The value used by the Port Transmit state machine to limit the maximum transmission rate. | |||||||||||||
| SstaPathCostMethod | 1.3.6.1.4.1.259.10.1.5.1.5.5 | StaPathCostMode | RW | ||||||||||
scalar · StaPathCostMode · read-write · current Indicates the type of spanning tree path cost mode configured on the switch. This mode applies to all instances of the spanning tree protocol running on the switch. When the value of this MIB object is changed, the path cost of all ports will be reassigned to the default path cost values based on the new spanning tree path cost mode and the ports' speed. When the value of this MIB object is set to long(2), the staPortLongPathCost MIB object must be used to retrieve/configure the spanning tree port path cost as a 32-bit value. The set operation on dot1dStpPortPathCost in BRIDGE-MIB will be rejected. While retrieving the value of dot1dStpPortPathCost, the maximum value of 65535 will be returned if the value of staPortLongPathCost for the same instance exceeds 65535. When the value of this MIB object is set to short(1), the dot1dStpPortPathCost in BRIDGE-MIB must be used. | |||||||||||||
| NxstMgt | 1.3.6.1.4.1.259.10.1.5.1.5.6 | ||||||||||||
| SmstName | 1.3.6.1.4.1.259.10.1.5.1.5.6.1 | DisplayString (SIZE (0..32)) | RW | ||||||||||
scalar · DisplayString (SIZE (0..32)) · read-write · current The name of the Multiple Spanning Tree region. | |||||||||||||
| SmstRevision | 1.3.6.1.4.1.259.10.1.5.1.5.6.2 | Integer32 | RW | ||||||||||
scalar · Integer32 · read-write · current The Revision number of the Multiple Spanning Tree region. | |||||||||||||
| SmstMaxHops | 1.3.6.1.4.1.259.10.1.5.1.5.6.3 | Integer32 (1..40) | RW | ||||||||||
scalar · Integer32 (1..40) · read-write · current The max hop number counts of the Multiple Spanning Tree region. | |||||||||||||
| TxstInstanceCfgTable | 1.3.6.1.4.1.259.10.1.5.1.5.6.4 | NA | |||||||||||
table · not-accessible · current This table is used to configure the property of a specific instance in Multiple Spanning Tree or Rapid Spanning Tree. If Rapid Spanning Tree protocol is in use, the mstInstanceEditIndex is always 0. | |||||||||||||
| RxstInstanceCfgEntry | 1.3.6.1.4.1.259.10.1.5.1.5.6.4.1 | NA | |||||||||||
row · not-accessible · current A conceptual row containing the property of the RST or MST instance.
| |||||||||||||
| CxstInstanceCfgIndex | 1.3.6.1.4.1.259.10.1.5.1.5.6.4.1.1 | Integer32 (1..64) | NA | ||||||||||
column · Integer32 (1..64) · not-accessible · current An arbitrary integer within the range from 1 to the value of the maximum instance that uniquely identifies a spanning tree instance. | |||||||||||||
| CxstInstanceCfgPriority | 1.3.6.1.4.1.259.10.1.5.1.5.6.4.1.2 | Integer32 (0..61440) | RW | ||||||||||
column · Integer32 (0..61440) · read-write · current The priority of a specific spanning tree instance. The value assigned should be in the range 0-61440 in steps of 4096. | |||||||||||||
| CxstInstanceCfgTimeSinceTopologyChange | 1.3.6.1.4.1.259.10.1.5.1.5.6.4.1.3 | TimeTicks | RO | ||||||||||
column · TimeTicks · read-only · current The time (in hundredths of a second) since the last topology change detected by the bridge entity in RST or MST. | |||||||||||||
| CxstInstanceCfgTopChanges | 1.3.6.1.4.1.259.10.1.5.1.5.6.4.1.4 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current The total number of topology changes detected by this bridge in RST or MST since the management entity was last reset or initialized. | |||||||||||||
| CxstInstanceCfgDesignatedRoot | 1.3.6.1.4.1.259.10.1.5.1.5.6.4.1.5 | BridgeId | RO | ||||||||||
column · BridgeId · read-only · current The bridge identifier of the root of the spanning tree as determined by the Multiple Spanning Tree Protocol. (802.1s) or Rapid Spanning Tree Protocol (802.1w) executed by this node. This value is used as the root identifier parameter in all configuration bridge PDUs originated by this node. | |||||||||||||
| CxstInstanceCfgRootCost | 1.3.6.1.4.1.259.10.1.5.1.5.6.4.1.6 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current The cost of the path to the root as seen from this bridge of the RST or MST. | |||||||||||||
| CxstInstanceCfgRootPort | 1.3.6.1.4.1.259.10.1.5.1.5.6.4.1.7 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current The number of the port which offers the lowest cost path from this bridge to the root bridge of the RST or MST. | |||||||||||||
| CxstInstanceCfgMaxAge | 1.3.6.1.4.1.259.10.1.5.1.5.6.4.1.8 | Timeout | RO | ||||||||||
column · Timeout · read-only · current The maximum age of Multiple Spanning Tree Protocol (802.1s) or Rapid Spanning Tree Protocol (802.1w) information learned from the network on any port before it is discarded, in units of hundredths of a second. This is the actual value that this bridge is currently using. | |||||||||||||
| CxstInstanceCfgHelloTime | 1.3.6.1.4.1.259.10.1.5.1.5.6.4.1.9 | Timeout | RO | ||||||||||
column · Timeout · read-only · current The amount of time between the transmission of configuration bridge PDUs by this node on any port when it is the root of the specific spanning tree or trying to become so, in units of hundredths of a second. This is the actual value that this bridge is currently using in RST or MST. | |||||||||||||
| CxstInstanceCfgHoldTime | 1.3.6.1.4.1.259.10.1.5.1.5.6.4.1.10 | Timeout | RO | ||||||||||
column · Timeout · read-only · current This time value determines the interval length during which no more than two configuration bridge PDUs shall be transmitted by this node, in units of hundredths of a second. | |||||||||||||
| CxstInstanceCfgForwardDelay | 1.3.6.1.4.1.259.10.1.5.1.5.6.4.1.11 | Timeout | RO | ||||||||||
column · Timeout · read-only · current For RST or MST protocol, this time value, measured in units of hundredths of a second, controls how fast a port changes its spanning state when moving towards the forwarding state. The value determines how long the port stays in each of the listening and learning states, which precede the forwarding state. This value is also used, when a topology change has been detected and is underway, to age all dynamic entries in the forwarding database. This value is the current value being used by the bridge. xstInstanceCfgBridgeForwardDelay defines the value that this bridge and all others would start using if/when this bridge were to become the root. | |||||||||||||
| CxstInstanceCfgBridgeMaxAge | 1.3.6.1.4.1.259.10.1.5.1.5.6.4.1.12 | Timeout | RO | ||||||||||
column · Timeout · read-only · current For RST or MST protocol, the time (in hundredths of second) that all bridges use for MaxAge when this bridge is acting as the root. Note that 802.1D-1990 specifies that the range for this parameter is related to the value of xstInstanceCfgBridgeHelloTime. The granularity of this timer is specified by 802.1D-1990 to be 1 second. | |||||||||||||
| CxstInstanceCfgBridgeHelloTime | 1.3.6.1.4.1.259.10.1.5.1.5.6.4.1.13 | Timeout | RO | ||||||||||
column · Timeout · read-only · current For RST or MST protocol,the time (in hundredths of a second) that all bridges use for HelloTime when this bridge is acting as the root. The granularity of this timer is specified by 802.1D-1990 to be 1 second. | |||||||||||||
| CxstInstanceCfgBridgeForwardDelay | 1.3.6.1.4.1.259.10.1.5.1.5.6.4.1.14 | Timeout | RO | ||||||||||
column · Timeout · read-only · current For RST or MST protocol, the time (in hundredths of a second) that all bridges use for ForwardDelay when this bridge is acting as the root. Note that 802.1D-1990 specifies that the range for this parameter is related to the value of xstInstanceCfgBridgeMaxAge. The granularity of this timer is specified by 802.1D-1990 to be 1 second. | |||||||||||||
| CxstInstanceCfgTxHoldCount | 1.3.6.1.4.1.259.10.1.5.1.5.6.4.1.15 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current For RST or MST protocol, the value used by the port transmit state machine to limit the maximum transmission rate. | |||||||||||||
| CxstInstanceCfgPathCostMethod | 1.3.6.1.4.1.259.10.1.5.1.5.6.4.1.16 | StaPathCostMode | RO | ||||||||||
column · StaPathCostMode · read-only · current For RST or MST protocol, this indicates the type of spanning tree path cost mode used by the switch. The mode applies to all instances of the Spanning Tree protocol running on the switch. When the value of this MIB object is changed, the path cost of all ports will be reassigned to the default path cost values based on the new spanning tree path cost mode and the ports' speed. When the value of this MIB object is set to long(2), the xstInstancePortPathCost MIB object must be used in order to retrieve/configure the spanning tree port path cost as a 32-bit value. The set operation on dot1dStpPortPathCost in BRIDGE-MIB will be rejected. While retrieving the value of dot1dStpPortPathCost, the maximum value of 65535 will be returned if the value of xstInstancePortPathCost for the same instance exceeds 65535. When the value of this MIB object is set to short(1), the dot1dStpPortPathCost in BRIDGE-MIB must be used. | |||||||||||||
| TxstInstancePortTable | 1.3.6.1.4.1.259.10.1.5.1.5.6.5 | NA | |||||||||||
table · not-accessible · current The extension table for dot1dStpPortEntry to provide additional Spanning Tree information and configuration. | |||||||||||||
| RxstInstancePortEntry | 1.3.6.1.4.1.259.10.1.5.1.5.6.5.1 | NA | |||||||||||
row · not-accessible · current The conceptual row for xstInstancePortTable. | |||||||||||||
| CxstInstancePortPriority | 1.3.6.1.4.1.259.10.1.5.1.5.6.5.1.3 | Integer32 (0..240) | RW | ||||||||||
column · Integer32 (0..240) · read-write · current Defines the priority used for this port in the Spanning Tree Algorithm. If the path cost for all ports on a switch is the same, the port with the highest priority (i.e., lowest value) will be configured as an active link in the Spanning Tree. This makes a port with higher priority less likely to be blocked if the Spanning Tree Algorithm is detecting network loops. Where more than one port is assigned the highest priority, the port with lowest numeric identifier will be enabled. | |||||||||||||
| CxstInstancePortState | 1.3.6.1.4.1.259.10.1.5.1.5.6.5.1.4 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current The port's current state as defined by application of
the Spanning Tree Protocol. This state controls what
action a port takes on reception of a frame:
discarding(1): Port receives configuration messages,
but does not forward packets.
learning(2): Port has transmitted configuration messages
for an interval set by the Forward Delay
parameter without receiving contradictory
information. Port address table is cleared,
and the port begins learning addresses.
forwarding(3): Port forwards packets, and continues learning
addresses.
For ports which are disabled (see xstInstancePortEnable),
this object will have a value of discarding(1).
| |||||||||||||
| CxstInstancePortEnable | 1.3.6.1.4.1.259.10.1.5.1.5.6.5.1.5 | EnabledStatus | RO | ||||||||||
column · EnabledStatus · read-only · current The enabled/disabled status of the port. | |||||||||||||
| CxstInstancePortDesignatedRoot | 1.3.6.1.4.1.259.10.1.5.1.5.6.5.1.7 | BridgeId | RO | ||||||||||
column · BridgeId · read-only · current The unique bridge identifier of the bridge recorded as the root in the configuration BPDUs transmitted by the designated bridge for the segment to which the port is attached. | |||||||||||||
| CxstInstancePortDesignatedCost | 1.3.6.1.4.1.259.10.1.5.1.5.6.5.1.8 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current The path cost of the designated port of the segment connected to this port. This value is compared to the root path cost field in received bridge PDUs. | |||||||||||||
| CxstInstancePortDesignatedBridge | 1.3.6.1.4.1.259.10.1.5.1.5.6.5.1.9 | BridgeId | RO | ||||||||||
column · BridgeId · read-only · current The bridge identifier of the bridge which this port considers to be the designated bridge for this port's segment. | |||||||||||||
| CxstInstancePortDesignatedPort | 1.3.6.1.4.1.259.10.1.5.1.5.6.5.1.10 | OCTET STRING (SIZE (2)) | RO | ||||||||||
column · OCTET STRING (SIZE (2)) · read-only · current The port identifier of the port on the designated bridge for this port's segment. | |||||||||||||
| CxstInstancePortForwardTransitions | 1.3.6.1.4.1.259.10.1.5.1.5.6.5.1.11 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current The number of times this port has transitioned from the learning state to the forwarding state. | |||||||||||||
| CxstInstancePortPortRole | 1.3.6.1.4.1.259.10.1.5.1.5.6.5.1.12 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current The role of the port in the RST or MST protocol:
(1) The port has no role within the spanning tree
(2) The port is part of the active topology connecting
the bridge to the root bridge (i.e., root port)
(3) The port is connecting a LAN through the bridge to the
root bridge (i.e., designated port)
(4) The port may provide connectivity if other
bridges, bridge ports, or LANs fail or are removed.
(5) The port provides backup if other
bridges, bridge ports, or LANs fail or are removed.
(6) For MST protocol only, indicates whether this instance
is in a master role.
| |||||||||||||
| CxstInstancePortAdminPathCost | 1.3.6.1.4.1.259.10.1.5.1.5.6.5.1.13 | Integer32 (0..200000000) | RW | ||||||||||
column · Integer32 (0..200000000) · read-write · current The admin value of the RST path cost or MST internal path cost, in the range of 1 to 200000000. 0 indicate the pathcost is dynamically determined by attribute of the port. This parameter is used to determine the best path between devices. Therefore, lower values should be assigned to ports attached to faster media, and higher values assigned to ports with slower media. (Path cost takes precedence over port priority). | |||||||||||||
| CxstInstancePortOperPathCost | 1.3.6.1.4.1.259.10.1.5.1.5.6.5.1.14 | Integer32 (1..200000000) | RO | ||||||||||
column · Integer32 (1..200000000) · read-only · current The oper value of the RST pathcost or MST internal pathcost, in the range of 1 to 200000000. This parameter is used to determine the best path between devices. Therefore, lower values should be assigned to ports attached to faster media, and higher values assigned to ports with slower media. (Path cost takes precedence over port priority). | |||||||||||||
| TmstInstanceEditTable | 1.3.6.1.4.1.259.10.1.5.1.5.6.6 | NA | |||||||||||
table · not-accessible · current The instance table for the Multiple Spanning Tree region | |||||||||||||
| RmstInstanceEditEntry | 1.3.6.1.4.1.259.10.1.5.1.5.6.6.1 | NA | |||||||||||
row · not-accessible · current A conceptual row containing the status of the MSTP instance.
| |||||||||||||
| CmstInstanceEditIndex | 1.3.6.1.4.1.259.10.1.5.1.5.6.6.1.1 | Integer32 (1..64) | NA | ||||||||||
column · Integer32 (1..64) · not-accessible · current An arbitrary integer within the range from 1 to the value of the maximum instance that uniquely identifies a spanning tree instance. | |||||||||||||
| CmstInstanceEditVlansMap | 1.3.6.1.4.1.259.10.1.5.1.5.6.6.1.2 | OCTET STRING (SIZE (0..128)) | RC | ||||||||||
column · OCTET STRING (SIZE (0..128)) · read-create · current A string of octets containing one bit per VLAN. The first octet corresponds to VLANs with vlanIndex values of 0 through 7; the second octet to VLANs 8 through 15; etc., The most significant bit of each octet corresponds to the lowest value vlanIndex in that octet. For each VLAN, if it is mapped to this MSTP instance, then the bit corresponding to that VLAN is set to '1'. To create a row, write any of mstInstanceEditVlansMap, mstInstanceEditVlansMap2k, mstInstanceEditVlansMap3k or mstInstanceEditVlansMap4k, to a non-empty list. To destroy a row, write all of these four variables to an empty list. | |||||||||||||
| CmstInstanceEditVlansMap2k | 1.3.6.1.4.1.259.10.1.5.1.5.6.6.1.3 | OCTET STRING (SIZE (0..128)) | RC | ||||||||||
column · OCTET STRING (SIZE (0..128)) · read-create · current A string of octets containing one bit per VLAN for VLANS with vlanIndex values of 1024 through 2047. The first octet corresponds to VLANs with vlanIndex values of 1024 through 1031; the second octet to VLANs 1032 through 1039; etc. The most significant bit of each octet corresponds to the lowest value vlanIndex in that octet. For each VLAN, if it is mapped to this MSTP instance, then the bit corresponding to that VLAN is set to '1'. To create a row, write any of mstInstanceEditVlansMap, mstInstanceEditVlansMap2k, mstInstanceEditVlansMap3k or mstInstanceEditVlansMap4k, to a non-empty list. To destroy a row, write all of these four variables to an empty list. | |||||||||||||
| CmstInstanceEditVlansMap3k | 1.3.6.1.4.1.259.10.1.5.1.5.6.6.1.4 | OCTET STRING (SIZE (0..128)) | RC | ||||||||||
column · OCTET STRING (SIZE (0..128)) · read-create · current A string of octets containing one bit per VLAN for VLANS with vlanIndex values of 2048 through 3071. The first octet corresponds to VLANs with vlanIndex values of 2048 through 2055; the second octet to VLANs 2056 through 2063; etc. The most significant bit of each octet corresponds to the lowest value vlanIndex in that octet. For each VLAN, if it is mapped to this MSTP instance, then the bit corresponding to that VLAN is set to '1'. To create a row, write any of mstInstanceEditVlansMap, mstInstanceEditVlansMap2k, mstInstanceEditVlansMap3k or mstInstanceEditVlansMap4k, to a non-empty list. To destroy a row, write all of these four variables to an empty list. | |||||||||||||
| CmstInstanceEditVlansMap4k | 1.3.6.1.4.1.259.10.1.5.1.5.6.6.1.5 | OCTET STRING (SIZE (0..128)) | RC | ||||||||||
column · OCTET STRING (SIZE (0..128)) · read-create · current A string of octets containing one bit per VLAN for VLANS with vlanIndex values of 3072 through 4095. The first octet corresponds to VLANs with vlanIndex values of 3072 through 3079; the second octet to VLANs 3080 through 3087; etc. The most significant bit of each octet corresponds to the lowest value vlanIndex in that octet. For each VLAN, if it is mapped to this MSTP instance, then the bit corresponding to that VLAN is set to '1'. To create a row, write any of mstInstanceEditVlansMap, mstInstanceEditVlansMap2k, mstInstanceEditVlansMap3k or mstInstanceEditVlansMap4k, to a non-empty list. To destroy a row, write all of these four variables to an empty list. | |||||||||||||
| CmstInstanceEditRemainingHops | 1.3.6.1.4.1.259.10.1.5.1.5.6.6.1.6 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current The remaining hop count for this MST instance. | |||||||||||||
| TmstInstanceOperTable | 1.3.6.1.4.1.259.10.1.5.1.5.6.7 | NA | |||||||||||
table · not-accessible · current The Multiple Spanning Tree region instance vlan mapped table. | |||||||||||||
| RmstInstanceOperEntry | 1.3.6.1.4.1.259.10.1.5.1.5.6.7.1 | NA | |||||||||||
row · not-accessible · current A conceptual row containing the status of the MSTP instance.
| |||||||||||||
| CmstInstanceOperIndex | 1.3.6.1.4.1.259.10.1.5.1.5.6.7.1.1 | Integer32 (0..4094) | NA | ||||||||||
column · Integer32 (0..4094) · not-accessible · current An arbitrary integer within the range from 1 to the value of the maximum instance that uniquely identifies a spanning tree instance. | |||||||||||||
| CmstInstanceOperVlansMap | 1.3.6.1.4.1.259.10.1.5.1.5.6.7.1.2 | OCTET STRING (SIZE (0..128)) | RO | ||||||||||
column · OCTET STRING (SIZE (0..128)) · read-only · current A string of octets containing one bit per VLAN. The first octet corresponds to VLANs with vlanIndex values of 0 through 7; the second octet to VLANs 8 through 15; etc., The most significant bit of each octet corresponds to the lowest value vlanIndex in that octet. For each VLAN, if it is mapped to this MSTP instance, then the bit corresponding to that VLAN is set to '1'. | |||||||||||||
| CmstInstanceOperVlansMap2k | 1.3.6.1.4.1.259.10.1.5.1.5.6.7.1.3 | OCTET STRING (SIZE (0..128)) | RO | ||||||||||
column · OCTET STRING (SIZE (0..128)) · read-only · current A string of octets containing one bit per VLAN for VLANS with vlanIndex values of 1024 through 2047. The first octet corresponds to VLANs with vlanIndex values of 1024 through 1031; the second octet to VLANs 1032 through 1039; etc. The most significant bit of each octet corresponds to the lowest value vlanIndex in that octet. For each VLAN, if it is mapped to this MSTP instance, then the bit corresponding to that VLAN is set to '1'. | |||||||||||||
| CmstInstanceOperVlansMap3k | 1.3.6.1.4.1.259.10.1.5.1.5.6.7.1.4 | OCTET STRING (SIZE (0..128)) | RO | ||||||||||
column · OCTET STRING (SIZE (0..128)) · read-only · current A string of octets containing one bit per VLAN for VLANS with vlanIndex values of 2048 through 3071. The first octet corresponds to VLANs with vlanIndex values of 2048 through 2055; the second octet to VLANs 2056 through 2063; etc. The most significant bit of each octet corresponds to the lowest value vlanIndex in that octet. For each VLAN, if it is mapped to this MSTP instance, then the bit corresponding to that VLAN is set to '1'. | |||||||||||||
| CmstInstanceOperVlansMap4k | 1.3.6.1.4.1.259.10.1.5.1.5.6.7.1.5 | OCTET STRING (SIZE (0..128)) | RO | ||||||||||
column · OCTET STRING (SIZE (0..128)) · read-only · current A string of octets containing one bit per VLAN for VLANS with vlanIndex values of 3072 through 4095. The first octet corresponds to VLANs with vlanIndex values of 3072 through 3079; the second octet to VLANs 3080 through 3087; etc. The most significant bit of each octet corresponds to the lowest value vlanIndex in that octet. For each VLAN, if it is mapped to this MSTP instance, then the bit corresponding to that VLAN is set to '1'. | |||||||||||||
| TstaLoopbackDetectionPortTable | 1.3.6.1.4.1.259.10.1.5.1.5.8 | NA | |||||||||||
table · not-accessible · current A table provides the mechanism to configure the spanning tree loopback detection of each port or trunk | |||||||||||||
| RstaLoopbackDetectionPortEntry | 1.3.6.1.4.1.259.10.1.5.1.5.8.1 | NA | |||||||||||
row · not-accessible · current A conceptual row of staLoopbackDetectionPortTable. | |||||||||||||
| CstaLoopbackDetectionPortIfIndex | 1.3.6.1.4.1.259.10.1.5.1.5.8.1.1 | InterfaceIndex | NA | ||||||||||
column · InterfaceIndex · not-accessible · current The port and the trunk interfaces of the portTable. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex in the IF-MIB. | |||||||||||||
| CstaLoopbackDetectionPortStatus | 1.3.6.1.4.1.259.10.1.5.1.5.8.1.2 | EnabledStatus | RW | ||||||||||
column · EnabledStatus · read-write · current Status of the port on whether spanning tree loopback detection is enabled. | |||||||||||||
| CstaLoopbackDetectionPortTrapStatus | 1.3.6.1.4.1.259.10.1.5.1.5.8.1.3 | EnabledStatus | RW | ||||||||||
column · EnabledStatus · read-write · current The parameter indicates whether the trap has to be sent when the loopback BPDUs have been detected. | |||||||||||||
| CstaLoopbackDetectionPortReleaseMode | 1.3.6.1.4.1.259.10.1.5.1.5.8.1.4 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Setting it to auto(1) indicates that this port can be released from discarding state automatically after loopback has occurred. Setting it to manual(2) indicates that this port can be released from discarding state manually after loopback has occurred.
| |||||||||||||
| CstaLoopbackDetectionPortRelease | 1.3.6.1.4.1.259.10.1.5.1.5.8.1.5 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Set this to release(2) to release the port from discarding state. noRelease(1) will always be obtained when reading this variable.
| |||||||||||||
| SstaSystemBPDUFlooding | 1.3.6.1.4.1.259.10.1.5.1.5.9 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Global BPDU flooding behavior configuration. When BPDU is received on spanning tree disabled port. (1) BPDU is flooded to all other spanning tree disabled ports in vlan that received BPDU. (2) BPDU is flooded to all other spanning tree disabled ports.
| |||||||||||||
| NrestartMgt | 1.3.6.1.4.1.259.10.1.5.1.7 | ||||||||||||
| SrestartOpCodeFile | 1.3.6.1.4.1.259.10.1.5.1.7.1 | DisplayString (SIZE (0..127)) | RW | ||||||||||
scalar · DisplayString (SIZE (0..127)) · read-write · current Name of op-code file for start-up. | |||||||||||||
| SrestartConfigFile | 1.3.6.1.4.1.259.10.1.5.1.7.2 | DisplayString (SIZE (0..127)) | RW | ||||||||||
scalar · DisplayString (SIZE (0..127)) · read-write · current Name of configuration file for start-up. | |||||||||||||
| SrestartControl | 1.3.6.1.4.1.259.10.1.5.1.7.3 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Setting this object to warmBoot(2) causes the device to reinitialize itself such that neither the agent configuration nor the protocol entity implementation is altered. Setting this object to coldBoot(3) causes the device to reinitialize itself such that the agent's configuration or the protocol entity implementation may be altered. When the device is running normally, this variable has a value of running(1).
| |||||||||||||
| NmirrorMgt | 1.3.6.1.4.1.259.10.1.5.1.8 | ||||||||||||
| TmirrorTable | 1.3.6.1.4.1.259.10.1.5.1.8.1 | NA | |||||||||||
table · not-accessible · current Table for port mirroring, enabling a port to be mirrored to/from another port. Not all ports can be mirrored and limitations may apply as to which ports can be used as either source or destination ports. | |||||||||||||
| RmirrorEntry | 1.3.6.1.4.1.259.10.1.5.1.8.1.1 | NA | |||||||||||
row · not-accessible · current The conceptual row of mirrorTable. | |||||||||||||
| CmirrorDestinationPort | 1.3.6.1.4.1.259.10.1.5.1.8.1.1.1 | Integer32 | NA | ||||||||||
column · Integer32 · not-accessible · current The destination port interface for mirrored packets. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex in the IF-MIB. | |||||||||||||
| CmirrorSourcePort | 1.3.6.1.4.1.259.10.1.5.1.8.1.1.2 | Integer32 | NA | ||||||||||
column · Integer32 · not-accessible · current The source port interface for mirrored packets. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex in the IF-MIB. | |||||||||||||
| CmirrorType | 1.3.6.1.4.1.259.10.1.5.1.8.1.1.3 | INTEGER | RC | ||||||||||
column · INTEGER · read-create · current If this value is rx(1), receive packets will be mirrored. If this value is tx(2), transmit packets will be mirrored. If this value is both(3), both receive and transmit packets will be mirrored.
| |||||||||||||
| CmirrorStatus | 1.3.6.1.4.1.259.10.1.5.1.8.1.1.4 | ValidStatus | RC | ||||||||||
column · ValidStatus · read-create · current Setting this to valid(1) creates an entry. Setting this to invalid(2) destroys an entry. | |||||||||||||
| NigmpSnoopMgt | 1.3.6.1.4.1.259.10.1.5.1.9 | ||||||||||||
| SigmpSnoopStatus | 1.3.6.1.4.1.259.10.1.5.1.9.1 | EnabledStatus | RW | ||||||||||
scalar · EnabledStatus · read-write · current Parameter to enable or disable IGMP snooping on the device. When enabled, the device will examine IGMP packets and set up filters for IGMP ports. | |||||||||||||
| SigmpSnoopQuerier | 1.3.6.1.4.1.259.10.1.5.1.9.2 | EnabledStatus | RW | ||||||||||
scalar · EnabledStatus · read-write · current Enables (disables) whether the switch acts as an IGMP querier. | |||||||||||||
| SigmpSnoopRouterPortExpireTime | 1.3.6.1.4.1.259.10.1.5.1.9.6 | Integer32 (1..65535) | RW | ||||||||||
scalar · Integer32 (1..65535) · read-write · current Sets the time (in seconds) the switch waits after the previous querier has stopped querying before the router port (which received query packets from previous querier) expires. | |||||||||||||
| SigmpSnoopVersion | 1.3.6.1.4.1.259.10.1.5.1.9.7 | Integer32 (1..3) | RW | ||||||||||
scalar · Integer32 (1..3) · read-write · current IGMP version snooped | |||||||||||||
| TigmpSnoopRouterCurrentTable | 1.3.6.1.4.1.259.10.1.5.1.9.8 | NA | |||||||||||
table · not-accessible · current Table for current router ports. | |||||||||||||
| RigmpSnoopRouterCurrentEntry | 1.3.6.1.4.1.259.10.1.5.1.9.8.1 | NA | |||||||||||
| CigmpSnoopRouterCurrentVlanIndex | 1.3.6.1.4.1.259.10.1.5.1.9.8.1.1 | Unsigned32 | NA | ||||||||||
column · Unsigned32 · not-accessible · current The interface identified by a particular value of this index is the same interface as identified by the same value of dot1qVlanIndex in the Q-BRIDGE-MIB. The entry will only appear here after a configure to igmpSnoopRouterStaticTable. | |||||||||||||
| CigmpSnoopRouterCurrentPorts | 1.3.6.1.4.1.259.10.1.5.1.9.8.1.2 | PortList | RO | ||||||||||
column · PortList · read-only · current The set of ports which are current router ports, including static router ports. Please refer to igmpSnoopRouterStaticTable. | |||||||||||||
| CigmpSnoopRouterCurrentStatus | 1.3.6.1.4.1.259.10.1.5.1.9.8.1.3 | PortList | RO | ||||||||||
column · PortList · read-only · current The set of ports which are static multicast router ports. | |||||||||||||
| TigmpSnoopRouterStaticTable | 1.3.6.1.4.1.259.10.1.5.1.9.9 | NA | |||||||||||
table · not-accessible · current Table for static router ports. | |||||||||||||
| RigmpSnoopRouterStaticEntry | 1.3.6.1.4.1.259.10.1.5.1.9.9.1 | NA | |||||||||||
| CigmpSnoopRouterStaticVlanIndex | 1.3.6.1.4.1.259.10.1.5.1.9.9.1.1 | Unsigned32 | NA | ||||||||||
column · Unsigned32 · not-accessible · current The interface identified by a particular value of this index is the same interface as identified by the same value of dot1qVlanIndex in the Q-BRIDGE-MIB. The entry will only appear here after a configure to igmpSnoopRouterStaticTable. | |||||||||||||
| CigmpSnoopRouterStaticPorts | 1.3.6.1.4.1.259.10.1.5.1.9.9.1.2 | PortList | RC | ||||||||||
column · PortList · read-create · current The set of ports which are static router ports. | |||||||||||||
| CigmpSnoopRouterStaticStatus | 1.3.6.1.4.1.259.10.1.5.1.9.9.1.3 | ValidStatus | RC | ||||||||||
column · ValidStatus · read-create · current Setting this to valid(1) creates an entry. Setting this to invalid(2) destroys an entry. | |||||||||||||
| TigmpSnoopMulticastStaticTable | 1.3.6.1.4.1.259.10.1.5.1.9.11 | NA | |||||||||||
table · not-accessible · current Table for static multicast addresses. | |||||||||||||
| RigmpSnoopMulticastStaticEntry | 1.3.6.1.4.1.259.10.1.5.1.9.11.1 | NA | |||||||||||
row · not-accessible · current Entry for static multicast addresses. | |||||||||||||
| CigmpSnoopMulticastStaticVlanIndex | 1.3.6.1.4.1.259.10.1.5.1.9.11.1.1 | Unsigned32 | NA | ||||||||||
column · Unsigned32 · not-accessible · current The interface identified by a particular value of this index is the same interface as identified by the same value of dot1qVlanIndex in the Q-BRIDGE-MIB. The entry will only appear here after a configure to igmpSnoopMulticastStaticTable. | |||||||||||||
| CigmpSnoopMulticastStaticIpAddress | 1.3.6.1.4.1.259.10.1.5.1.9.11.1.2 | IpAddress | NA | ||||||||||
column · IpAddress · not-accessible · current IP address of multicast group. | |||||||||||||
| CigmpSnoopMulticastStaticPorts | 1.3.6.1.4.1.259.10.1.5.1.9.11.1.3 | PortList | RC | ||||||||||
column · PortList · read-create · current The set of ports which are members. | |||||||||||||
| CigmpSnoopMulticastStaticStatus | 1.3.6.1.4.1.259.10.1.5.1.9.11.1.4 | ValidStatus | RC | ||||||||||
column · ValidStatus · read-create · current Setting this to valid(1) creates an entry. Setting this to invalid(2) destroys an entry. | |||||||||||||
| TigmpSnoopCurrentVlanTable | 1.3.6.1.4.1.259.10.1.5.1.9.14 | NA | |||||||||||
table · not-accessible · current Table for configuring IGMP snooping for each VLAN which exists in the device by (local or network) management, or dynamically created as a result of GVRP requests received. | |||||||||||||
| RigmpSnoopCurrentVlanEntry | 1.3.6.1.4.1.259.10.1.5.1.9.14.1 | NA | |||||||||||
| CigmpSnoopCurrentVlanIndex | 1.3.6.1.4.1.259.10.1.5.1.9.14.1.1 | Unsigned32 | NA | ||||||||||
column · Unsigned32 · not-accessible · current Same is dot1qVlanIndex in the Q-BRIDGE-MIB. This table has only one entry - the entry for the VLAN of the management interface. | |||||||||||||
| CigmpSnoopCurrentVlanStatus | 1.3.6.1.4.1.259.10.1.5.1.9.14.1.2 | EnabledStatus | RW | ||||||||||
column · EnabledStatus · read-write · current Parameter to enable or disable IGMP snooping on this VLAN. When enabled, the device will examine IGMP packets and set up filters for IGMP ports. | |||||||||||||
| CigmpSnoopCurrentVlanImmediateLeave | 1.3.6.1.4.1.259.10.1.5.1.9.14.1.3 | EnabledStatus | RW | ||||||||||
column · EnabledStatus · read-write · current The parameter to enable or disable the Immediate-Leave feature on this VLAN. | |||||||||||||
| CigmpSnoopCurrentVlanGeneralQuerySuppression | 1.3.6.1.4.1.259.10.1.5.1.9.14.1.4 | EnabledStatus | RW | ||||||||||
column · EnabledStatus · read-write · current The parameter to enable or disable the general query suppresion on this VLAN. | |||||||||||||
| CigmpSnoopCurrentVlanLastMemQueryCount | 1.3.6.1.4.1.259.10.1.5.1.9.14.1.5 | Unsigned32 (1..255) | RW | ||||||||||
column · Unsigned32 (1..255) · read-write · current Represents the number of queries sent by the switch before it assumes there are no local members. | |||||||||||||
| CigmpSnoopCurrentVlanLastMemQueryIntvl | 1.3.6.1.4.1.259.10.1.5.1.9.14.1.6 | Unsigned32 (1..31744) | RW | ||||||||||
column · Unsigned32 (1..31744) · read-write · current The last member query interval is the max response time inserted into group-specific queries sent in response to leave group messages,and is also the the max response time inserted into group-and-source-specific query messages. | |||||||||||||
| CigmpSnoopCurrentVlanProxyAddress | 1.3.6.1.4.1.259.10.1.5.1.9.14.1.7 | IpAddress | RW | ||||||||||
column · IpAddress · read-write · current Represents the address of queries sent by the switch. | |||||||||||||
| CigmpSnoopCurrentVlanQueryIntvl | 1.3.6.1.4.1.259.10.1.5.1.9.14.1.8 | Unsigned32 (2..31744) | RW | ||||||||||
column · Unsigned32 (2..31744) · read-write · current Represents the query interval of queries sent by the switch. | |||||||||||||
| CigmpSnoopCurrentVlanQueryRespIntvl | 1.3.6.1.4.1.259.10.1.5.1.9.14.1.9 | Unsigned32 (10..31740) | RW | ||||||||||
column · Unsigned32 (10..31740) · read-write · current Represents the query response interval of queries sent by the switch. | |||||||||||||
| CigmpSnoopCurrentVlanProxyReporting | 1.3.6.1.4.1.259.10.1.5.1.9.14.1.10 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Set this variable to enabled(1) to enable the feature. Set this variable to disabled(2) to disable the feature. Set this variable to default(3), the status of the feature is decided by the global configuration.
| |||||||||||||
| CigmpSnoopCurrentVlanVersion | 1.3.6.1.4.1.259.10.1.5.1.9.14.1.11 | Unsigned32 (1..3) | RW | ||||||||||
column · Unsigned32 (1..3) · read-write · current the version of igmp packets is supported by this vlan. | |||||||||||||
| CigmpSnoopCurrentVlanVersionExclusive | 1.3.6.1.4.1.259.10.1.5.1.9.14.1.12 | EnabledStatus | RW | ||||||||||
column · EnabledStatus · read-write · current Enable/disable control of the IGMP Snooping exclusive supported version. | |||||||||||||
| TigmpSnoopMulticastGroupTable | 1.3.6.1.4.1.259.10.1.5.1.9.15 | NA | |||||||||||
table · not-accessible · current Table for current multicast addresses. | |||||||||||||
| RigmpSnoopMulticastGroupEntry | 1.3.6.1.4.1.259.10.1.5.1.9.15.1 | NA | |||||||||||
row · not-accessible · current Entry for Group multicast addresses. | |||||||||||||
| CigmpSnoopMulticastGroupVlanIndex | 1.3.6.1.4.1.259.10.1.5.1.9.15.1.1 | Unsigned32 | NA | ||||||||||
column · Unsigned32 · not-accessible · current The interface identified by a particular value of this index is the same interface as identified by the same value of dot1qVlanIndex in the Q-BRIDGE-MIB. The entry will only appear here after a configure to igmpSnoopMulticastStaticTable. | |||||||||||||
| CigmpSnoopMulticastGroupIpAddress | 1.3.6.1.4.1.259.10.1.5.1.9.15.1.2 | IpAddress | NA | ||||||||||
column · IpAddress · not-accessible · current IP address of multicast group. | |||||||||||||
| CigmpSnoopMulticastGroupSourceIPAddress | 1.3.6.1.4.1.259.10.1.5.1.9.15.1.3 | IpAddress | NA | ||||||||||
column · IpAddress · not-accessible · current Source IP address of source. | |||||||||||||
| CigmpSnoopMulticastGroupPorts | 1.3.6.1.4.1.259.10.1.5.1.9.15.1.4 | PortList | RO | ||||||||||
column · PortList · read-only · current The set of ports which are members of a multicast group, including static members. Please refer to igmpSnoopMulticastStaticTable. | |||||||||||||
| CigmpSnoopMulticastGroupStatus | 1.3.6.1.4.1.259.10.1.5.1.9.15.1.5 | PortList | RO | ||||||||||
column · PortList · read-only · current The set of ports which are static IGMP member ports. | |||||||||||||
| TigmpSnoopPortTable | 1.3.6.1.4.1.259.10.1.5.1.9.27 | NA | |||||||||||
table · not-accessible · current Table of IGMP Snooping service per port. | |||||||||||||
| RigmpSnoopPortEntry | 1.3.6.1.4.1.259.10.1.5.1.9.27.1 | NA | |||||||||||
| CigmpSnoopPortIndex | 1.3.6.1.4.1.259.10.1.5.1.9.27.1.1 | Unsigned32 | NA | ||||||||||
column · Unsigned32 · not-accessible · current The port and the trunk (excluding trunk members) interface of the igmpSnoopPortTable. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex in the IF-MIB. | |||||||||||||
| CigmpSnoopQueryDrop | 1.3.6.1.4.1.259.10.1.5.1.9.27.1.3 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Parameter to enable or disable dropping IGMP Query packet.
| |||||||||||||
| CigmpSnoopMulticastDataDrop | 1.3.6.1.4.1.259.10.1.5.1.9.27.1.4 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Parameter to enable or disable dropping IP multicast data
| |||||||||||||
| NigmpSnoopGlobalMgt | 1.3.6.1.4.1.259.10.1.5.1.9.28 | ||||||||||||
| SigmpSnoopProxyReporting | 1.3.6.1.4.1.259.10.1.5.1.9.28.1 | EnabledStatus | RW | ||||||||||
scalar · EnabledStatus · read-write · current Parameter to enable or disable IGMP snooping proxy reporting on the device. | |||||||||||||
| SigmpSnoopRouterAlertOptionCheck | 1.3.6.1.4.1.259.10.1.5.1.9.28.2 | EnabledStatus | RW | ||||||||||
scalar · EnabledStatus · read-write · current Parameter to enable or disable IGMP snooping router alert option check on the device. | |||||||||||||
| SigmpSnoopTcnFlood | 1.3.6.1.4.1.259.10.1.5.1.9.28.3 | EnabledStatus | RW | ||||||||||
scalar · EnabledStatus · read-write · current Parameter to enable or disable IGMP snooping tcn flood on the device. | |||||||||||||
| SigmpSnoopTcnQuerySolicit | 1.3.6.1.4.1.259.10.1.5.1.9.28.4 | EnabledStatus | RW | ||||||||||
scalar · EnabledStatus · read-write · current Parameter to enable or disable IGMP snooping tcn query solicit on the device. | |||||||||||||
| SigmpSnoopUnregisteredDataFlood | 1.3.6.1.4.1.259.10.1.5.1.9.28.5 | EnabledStatus | RW | ||||||||||
scalar · EnabledStatus · read-write · current Parameter to enable or disable IGMP snooping Unregistered data flood solicit on the device. | |||||||||||||
| SigmpSnoopUnsolicitedReportInterval | 1.3.6.1.4.1.259.10.1.5.1.9.28.6 | Unsigned32 (1..65535) | RW | ||||||||||
scalar · Unsigned32 (1..65535) · read-write · current Setting this value to specify how long (in seconds) the uplink ports should transmit unsolicited reports. | |||||||||||||
| SigmpSnoopVersionExclusive | 1.3.6.1.4.1.259.10.1.5.1.9.28.7 | EnabledStatus | RW | ||||||||||
scalar · EnabledStatus · read-write · current Parameter to enable or disable IGMP snooping version exclusive on the device. | |||||||||||||
| NipMgt | 1.3.6.1.4.1.259.10.1.5.1.10 | ||||||||||||
| SnetDefaultGateway | 1.3.6.1.4.1.259.10.1.5.1.10.2 | IpAddress | RW | ||||||||||
scalar · IpAddress · read-write · current The IP Address of the default gateway. If this value is undefined or unknown, it shall have the value 0.0.0.0. | |||||||||||||
| SipHttpState | 1.3.6.1.4.1.259.10.1.5.1.10.3 | EnabledStatus | RW | ||||||||||
scalar · EnabledStatus · read-write · current Whether HTTP is enabled. | |||||||||||||
| SipHttpPort | 1.3.6.1.4.1.259.10.1.5.1.10.4 | Integer32 (1..65535) | RW | ||||||||||
scalar · Integer32 (1..65535) · read-write · current The port number for HTTP. | |||||||||||||
| SipDhcpRestart | 1.3.6.1.4.1.259.10.1.5.1.10.5 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current When set to restart(1) the DHCP server will restart. When read, this value always returns noRestart(2).
| |||||||||||||
| SipHttpsState | 1.3.6.1.4.1.259.10.1.5.1.10.6 | EnabledStatus | RW | ||||||||||
scalar · EnabledStatus · read-write · current Whether HTTPS is enabled. | |||||||||||||
| SipHttpsPort | 1.3.6.1.4.1.259.10.1.5.1.10.7 | Integer32 (1..65535) | RW | ||||||||||
scalar · Integer32 (1..65535) · read-write · current The port number for HTTPS. | |||||||||||||
| NdhcpMgt | 1.3.6.1.4.1.259.10.1.5.1.10.11 | ||||||||||||
| NdhcpClient | 1.3.6.1.4.1.259.10.1.5.1.10.11.1 | ||||||||||||
| NdhcpcOptions | 1.3.6.1.4.1.259.10.1.5.1.10.11.1.1 | ||||||||||||
| TdhcpcInterfaceTable | 1.3.6.1.4.1.259.10.1.5.1.10.11.1.1.1 | NA | |||||||||||
table · not-accessible · current Table for DHCP client information listed by interface. Depending on the nature of the product, this table may have only one entry(e.g. for the management VLAN), or may have many entries(e.g. for all ports, or for all static VLANs). | |||||||||||||
| RdhcpcInterfaceEntry | 1.3.6.1.4.1.259.10.1.5.1.10.11.1.1.1.1 | NA | |||||||||||
row · not-accessible · current Entry for DHCP client information listed by interface.
| |||||||||||||
| CdhcpcIfIndex | 1.3.6.1.4.1.259.10.1.5.1.10.11.1.1.1.1.1 | Integer32 | NA | ||||||||||
column · Integer32 · not-accessible · current This is defined by ifIndex in the IF-MIB.(static vlan if index) | |||||||||||||
| CdhcpcIfClientIdMode | 1.3.6.1.4.1.259.10.1.5.1.10.11.1.1.1.1.2 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Whether the Client ID is in text mode or in Hex mode.
| |||||||||||||
| CdhcpcIfClientId | 1.3.6.1.4.1.259.10.1.5.1.10.11.1.1.1.1.3 | OCTET STRING (SIZE (0..32)) | RW | ||||||||||
column · OCTET STRING (SIZE (0..32)) · read-write · current The value that the DHCP client sets in the client_id option of DHCPDISCOVER and DHCPREQUEST messages. This value may be used by DHCP servers to uniquely identify the client. | |||||||||||||
| CdhcpcIfVendorClassIdMode | 1.3.6.1.4.1.259.10.1.5.1.10.11.1.1.1.1.4 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Whether the vendor class ID is in text mode or in Hex mode.
| |||||||||||||
| CdhcpcIfVendorClassId | 1.3.6.1.4.1.259.10.1.5.1.10.11.1.1.1.1.5 | OCTET STRING (SIZE (1..32)) | RW | ||||||||||
column · OCTET STRING (SIZE (1..32)) · read-write · current The value that the DHCP client sets in the vendor class_id option of DHCPDISCOVER and DHCPREQUEST messages. This value may be used by DHCP servers to identify vendor classof the client. | |||||||||||||
| NdhcpRelay | 1.3.6.1.4.1.259.10.1.5.1.10.11.2 | ||||||||||||
| TdhcpRelayServerAddrTable | 1.3.6.1.4.1.259.10.1.5.1.10.11.2.2 | NA | |||||||||||
table · not-accessible · current The role of the DHCP relay agent is to forward requests and replies between server and client when they are not in the same subnet. To enable DHCP relay service the user needs to specify relay server IP address and then restart DHCP relay. This table is to specify relay server IP address, the maximum number of server IP addresses user can specify is 5. To restart DHCP relay, please use the dhcpRelayRestart variable. | |||||||||||||
| RdhcpRelayServerAddrEntry | 1.3.6.1.4.1.259.10.1.5.1.10.11.2.2.1 | NA | |||||||||||
row · not-accessible · current A conceptual row of dhcpRelayServerAddrTable. | |||||||||||||
| CdhcpRelayServerAddrIfIndex | 1.3.6.1.4.1.259.10.1.5.1.10.11.2.2.1.1 | Integer32 | NA | ||||||||||
column · Integer32 · not-accessible · current The VLAN interface being used by this table entry. | |||||||||||||
| CdhcpRelayServerAddrIndex | 1.3.6.1.4.1.259.10.1.5.1.10.11.2.2.1.2 | Integer32 (0..5) | NA | ||||||||||
column · Integer32 (0..5) · not-accessible · current The index of the relay server IP address. | |||||||||||||
| CdhcpRelayServerAddrServerIp | 1.3.6.1.4.1.259.10.1.5.1.10.11.2.2.1.3 | IpAddress | RW | ||||||||||
column · IpAddress · read-write · current The IP address of the relay server. | |||||||||||||
| SdhcpRelayRestart | 1.3.6.1.4.1.259.10.1.5.1.10.11.2.3 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Set this object to restart(1) to restart DCHP Relay. Always get noRestart(2) when you read this variable.
| |||||||||||||
| TdhcpRelayServerInetAddrTable | 1.3.6.1.4.1.259.10.1.5.1.10.11.2.4 | NA | |||||||||||
table · not-accessible · current The role of DHCP Relay Agent is to forward requests and replies between server and client when they are not in the same subnet. To enable DHCP Relay service user needs to specify Relay Server IP address and then restart DHCP Relay. This Table is to specify Relay Server IP address,the maximum numbers of server IP address user can specify is 5.To Restart DHCP Relay, please use the dhcpRelayRestart variable. | |||||||||||||
| RdhcpRelayServerInetAddrEntry | 1.3.6.1.4.1.259.10.1.5.1.10.11.2.4.1 | NA | |||||||||||
row · not-accessible · current A conceptual row of dhcpRelayServerAddrTable. | |||||||||||||
| CdhcpRelayServerInetAddrIfIndex | 1.3.6.1.4.1.259.10.1.5.1.10.11.2.4.1.1 | Integer32 | NA | ||||||||||
column · Integer32 · not-accessible · current The VLAN interface being used by this table entry. | |||||||||||||
| CdhcpRelayServerInetAddrIndex | 1.3.6.1.4.1.259.10.1.5.1.10.11.2.4.1.2 | Integer32 (1..5) | NA | ||||||||||
column · Integer32 (1..5) · not-accessible · current The Index of the Relay server IP address. | |||||||||||||
| CdhcpRelayServerInetAddressType | 1.3.6.1.4.1.259.10.1.5.1.10.11.2.4.1.3 | InetAddressType | RW | ||||||||||
column · InetAddressType · read-write · current The INET address type of the relay server. | |||||||||||||
| CdhcpRelayServerInetAddress | 1.3.6.1.4.1.259.10.1.5.1.10.11.2.4.1.4 | InetAddress | RW | ||||||||||
column · InetAddress · read-write · current The INET address of the relay server. | |||||||||||||
| NdhcpServerMgt | 1.3.6.1.4.1.259.10.1.5.1.10.11.3 | ||||||||||||
| TdhcpPoolTable | 1.3.6.1.4.1.259.10.1.5.1.10.11.3.1 | NA | |||||||||||
table · not-accessible · current A dhcp pool is a collection of user configuration such as option config-lease time or dns-server IPs, a network address for network pool, or a host IP plus a hardware address pair for host pool. However, a dhcp pool only can either be a network pool or a host pool, or none of them (such as that pool only containing option config no network address config or a host ip config as well) | |||||||||||||
| RdhcpPoolEntry | 1.3.6.1.4.1.259.10.1.5.1.10.11.3.1.1 | NA | |||||||||||
| CdhcpPoolPoolName | 1.3.6.1.4.1.259.10.1.5.1.10.11.3.1.1.1 | DisplayString (SIZE (1..8)) | NA | ||||||||||
column · DisplayString (SIZE (1..8)) · not-accessible · current PoolName, simply specify a string which string size NO MORE THAN 8 | |||||||||||||
| CdhcpPoolPoolType | 1.3.6.1.4.1.259.10.1.5.1.10.11.3.1.1.2 | INTEGER | RC | ||||||||||
column · INTEGER · read-create · current Pool Type: notSpecify(1); netWork(2);host(3)
| |||||||||||||
| CdhcpPoolPoolAddress | 1.3.6.1.4.1.259.10.1.5.1.10.11.3.1.1.3 | IpAddress | RC | ||||||||||
column · IpAddress · read-create · current Pool Address | |||||||||||||
| CdhcpPoolSubnetMask | 1.3.6.1.4.1.259.10.1.5.1.10.11.3.1.1.4 | IpAddress | RC | ||||||||||
column · IpAddress · read-create · current Subnet Mask | |||||||||||||
| CdhcpPoolHardwareType | 1.3.6.1.4.1.259.10.1.5.1.10.11.3.1.1.5 | INTEGER | RC | ||||||||||
column · INTEGER · read-create · current Hardware type: notSpecify(1); ethernet(2); ieee802(3); fddi(4)
| |||||||||||||
| CdhcpPoolMacAddress | 1.3.6.1.4.1.259.10.1.5.1.10.11.3.1.1.6 | OCTET STRING (SIZE (6)) | RC | ||||||||||
column · OCTET STRING (SIZE (6)) · read-create · current MAC address | |||||||||||||
| CdhcpPoolstatus | 1.3.6.1.4.1.259.10.1.5.1.10.11.3.1.1.7 | ValidStatus | RC | ||||||||||
column · ValidStatus · read-create · current Setting this to valid(1) creates an entry. Setting this to invalid(2) destroys an entry. | |||||||||||||
| TdhcpPoolOptionTable | 1.3.6.1.4.1.259.10.1.5.1.10.11.3.2 | NA | |||||||||||
table · not-accessible · current This is the Option table of the dhcpPoolTable, user can specify Options configuration in this table | |||||||||||||
| RdhcpPoolOptionEntry | 1.3.6.1.4.1.259.10.1.5.1.10.11.3.2.1 | NA | |||||||||||
| CdhcpPoolOptionPoolName | 1.3.6.1.4.1.259.10.1.5.1.10.11.3.2.1.1 | DisplayString (SIZE (1..8)) | NA | ||||||||||
column · DisplayString (SIZE (1..8)) · not-accessible · current PoolName, simply specify a string which string size NO MORE THAN 8 | |||||||||||||
| CdhcpPoolOptionNextServer | 1.3.6.1.4.1.259.10.1.5.1.10.11.3.2.1.2 | IpAddress | RW | ||||||||||
column · IpAddress · read-write · current Specifies the IP address of the next server in the boot process, which is typically a Trivial File Transfer Protocol(TFTP) server. One IP address is required. | |||||||||||||
| CdhcpPoolOptionNetbiosNodeType | 1.3.6.1.4.1.259.10.1.5.1.10.11.3.2.1.3 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Specifies the NetBIOS node type. Valid types are: none(1) b-node(2) - Broadcast p-node(3) - Peer-to-peer m-node(4) - Mixed h-node(5) - Hybrid.
| |||||||||||||
| CdhcpPoolOptionDomainName | 1.3.6.1.4.1.259.10.1.5.1.10.11.3.2.1.4 | DisplayString (SIZE (0..128)) | RW | ||||||||||
column · DisplayString (SIZE (0..128)) · read-write · current Specifies the domain name string. | |||||||||||||
| CdhcpPoolOptionBootFile | 1.3.6.1.4.1.259.10.1.5.1.10.11.3.2.1.5 | DisplayString (SIZE (0..128)) | RW | ||||||||||
column · DisplayString (SIZE (0..128)) · read-write · current To specify the name of the default boot image. | |||||||||||||
| CdhcpPoolOptionLeaseTime | 1.3.6.1.4.1.259.10.1.5.1.10.11.3.2.1.6 | Integer32 (1..31536000 | 2147483647) | RW | ||||||||||
column · Integer32 (1..31536000 | 2147483647) · read-write · current To configure the duration of the lease, in seconds, of an IP address that is assigned from a DHCP Server to a DHCP client. Valid values are from 1 to 31536000 (365 days), and a large number '7FFFFFFF'h, which is 'practically infinite'.
| |||||||||||||
| CdhcpPoolOptionCidMode | 1.3.6.1.4.1.259.10.1.5.1.10.11.3.2.1.7 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Set this variable to text(2) of hex(3) to specify the mode of the Client Id, which is useful for CLI to determine the display way of the Client Id. You will get default value 'notSpecify(1)'when this variable had never been set. Setting this to notSpecify(1) is a invalid operation.
| |||||||||||||
| CdhcpPoolOptionCidBuffer | 1.3.6.1.4.1.259.10.1.5.1.10.11.3.2.1.8 | OCTET STRING (SIZE (0..128)) | RW | ||||||||||
column · OCTET STRING (SIZE (0..128)) · read-write · current Content of Client Id. You MUST specify the dhcpPoolOptionCidMode before setting this variable. | |||||||||||||
| TdhcpPoolOptionDnsSerTable | 1.3.6.1.4.1.259.10.1.5.1.10.11.3.3 | NA | |||||||||||
table · not-accessible · current To specify the DNS IP servers available to a DHCP client, you can specify up to two addresses for each DHCP pool. | |||||||||||||
| RdhcpPoolOptionDnsSerEntry | 1.3.6.1.4.1.259.10.1.5.1.10.11.3.3.1 | NA | |||||||||||
row · not-accessible · current A conceptual row of dhcpPoolOptionDnsSerTable. | |||||||||||||
| CdhcpPoolOptionDnsSerPoolName | 1.3.6.1.4.1.259.10.1.5.1.10.11.3.3.1.1 | DisplayString (SIZE (1..8)) | NA | ||||||||||
column · DisplayString (SIZE (1..8)) · not-accessible · current PoolName, simply specify a string which string size NO MORE THAN 8 | |||||||||||||
| CdhcpPoolOptionDnsSerIndex | 1.3.6.1.4.1.259.10.1.5.1.10.11.3.3.1.2 | Integer32 (1..2) | NA | ||||||||||
column · Integer32 (1..2) · not-accessible · current Index of the DNS server. | |||||||||||||
| CdhcpPoolOptionDnsSerIpAddress | 1.3.6.1.4.1.259.10.1.5.1.10.11.3.3.1.3 | IpAddress | RW | ||||||||||
column · IpAddress · read-write · current Ip address of the DNS server. | |||||||||||||
| TdhcpPoolOptDefaultRouterTable | 1.3.6.1.4.1.259.10.1.5.1.10.11.3.4 | NA | |||||||||||
table · not-accessible · current Specifices the default router list for a DHCP Client, you can specify up to two addresses for each DHCP pool. | |||||||||||||
| RdhcpPoolOptDefaultRouterEntry | 1.3.6.1.4.1.259.10.1.5.1.10.11.3.4.1 | NA | |||||||||||
row · not-accessible · current A conceptual row of dhcpPoolOptDefaultRouterTable. | |||||||||||||
| CdhcpPoolOptDefaultRouterPoolName | 1.3.6.1.4.1.259.10.1.5.1.10.11.3.4.1.1 | DisplayString (SIZE (1..8)) | NA | ||||||||||
column · DisplayString (SIZE (1..8)) · not-accessible · current PoolName, simply specify a string which string size NO MORE THAN 8 | |||||||||||||
| CdhcpPoolOptDefaultRouterIndex | 1.3.6.1.4.1.259.10.1.5.1.10.11.3.4.1.2 | Integer32 (1..2) | NA | ||||||||||
column · Integer32 (1..2) · not-accessible · current Index of the default router. | |||||||||||||
| CdhcpPoolOptDefaultRouterIpAddress | 1.3.6.1.4.1.259.10.1.5.1.10.11.3.4.1.3 | IpAddress | RW | ||||||||||
column · IpAddress · read-write · current Specifies the IP address of a router. One IP address is required. | |||||||||||||
| TdhcpPoolOptNetbiosServerTable | 1.3.6.1.4.1.259.10.1.5.1.10.11.3.5 | NA | |||||||||||
table · not-accessible · current To configure the NetBIOS WINS name servers that are available to DHCP clients. You can specify up to eight addressed for each DHCP pool. | |||||||||||||
| RdhcpPoolOptNetbiosServerEntry | 1.3.6.1.4.1.259.10.1.5.1.10.11.3.5.1 | NA | |||||||||||
row · not-accessible · current A conceptual row of dhcpPoolOptNetbiosServerTable. | |||||||||||||
| CdhcpPoolOptNetbiosServerPoolName | 1.3.6.1.4.1.259.10.1.5.1.10.11.3.5.1.1 | DisplayString (SIZE (1..8)) | NA | ||||||||||
column · DisplayString (SIZE (1..8)) · not-accessible · current PoolName, simply specify a string which string size NO MORE THAN 8 | |||||||||||||
| CdhcpPoolOptNetbiosServerIndex | 1.3.6.1.4.1.259.10.1.5.1.10.11.3.5.1.2 | Integer32 (1..8) | NA | ||||||||||
column · Integer32 (1..8) · not-accessible · current Index of the Netbios name Server. | |||||||||||||
| CdhcpPoolOptNetbiosServerIpAddress | 1.3.6.1.4.1.259.10.1.5.1.10.11.3.5.1.3 | IpAddress | RW | ||||||||||
column · IpAddress · read-write · current Specifies the IP address of the NetBIOS WINS name server. One IP address is required. | |||||||||||||
| TdhcpServerExcludedIpAddrTable | 1.3.6.1.4.1.259.10.1.5.1.10.11.3.6 | NA | |||||||||||
table · not-accessible · current To specify IP addresses that a DHCP Server shuld not assign to DHCP clients. | |||||||||||||
| RdhcpServerExcludedIpAddrEntry | 1.3.6.1.4.1.259.10.1.5.1.10.11.3.6.1 | NA | |||||||||||
row · not-accessible · current A conceptual row of dhcpServerExcludedIpAddrTable. | |||||||||||||
| CdhcpServerExcludedIpAddrLowIp | 1.3.6.1.4.1.259.10.1.5.1.10.11.3.6.1.1 | IpAddress | NA | ||||||||||
column · IpAddress · not-accessible · current The excluded IP address, or first IP address in an excluded address range. | |||||||||||||
| CdhcpServerExcludedIpAddrHiIp | 1.3.6.1.4.1.259.10.1.5.1.10.11.3.6.1.2 | IpAddress | NA | ||||||||||
column · IpAddress · not-accessible · current The last IP address in the excluded address range. | |||||||||||||
| CdhcpServerExcludedIpAddrStatus | 1.3.6.1.4.1.259.10.1.5.1.10.11.3.6.1.3 | ValidStatus | RC | ||||||||||
column · ValidStatus · read-create · current Setting this to valid(1) creates an entry. Setting this to invalid(2) destroys an entry. | |||||||||||||
| TdhcpServerLeaseBindingTable | 1.3.6.1.4.1.259.10.1.5.1.10.11.3.7 | NA | |||||||||||
table · not-accessible · current To configure the address bindings on the DHCP server. | |||||||||||||
| RdhcpServerLeaseBindingEntry | 1.3.6.1.4.1.259.10.1.5.1.10.11.3.7.1 | NA | |||||||||||
row · not-accessible · current A conceptual row of dhcpServerLeaseBindingTable. | |||||||||||||
| CdhcpServerLeaseBindingIp | 1.3.6.1.4.1.259.10.1.5.1.10.11.3.7.1.1 | IpAddress | NA | ||||||||||
column · IpAddress · not-accessible · current The IP address of the host as recorded on the DHCP Server. | |||||||||||||
| CdhcpServerLeaseBindingMac | 1.3.6.1.4.1.259.10.1.5.1.10.11.3.7.1.2 | OCTET STRING (SIZE (6)) | RO | ||||||||||
column · OCTET STRING (SIZE (6)) · read-only · current The MAC address of the host as recorded on the DHCP Server. | |||||||||||||
| CdhcpServerLeaseBindingLeaseTime | 1.3.6.1.4.1.259.10.1.5.1.10.11.3.7.1.3 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current The lease expiration date of the IP address of the host. | |||||||||||||
| CdhcpServerLeaseBindingStartTime | 1.3.6.1.4.1.259.10.1.5.1.10.11.3.7.1.4 | DisplayString (SIZE (20)) | RO | ||||||||||
column · DisplayString (SIZE (20)) · read-only · current Show current system real time in sec. | |||||||||||||
| CdhcpServerLeaseBindingStatus | 1.3.6.1.4.1.259.10.1.5.1.10.11.3.7.1.5 | ValidStatus | RC | ||||||||||
column · ValidStatus · read-create · current Setting this to valid(1) creates an entry. Setting this to invalid(2) destroys an entry. | |||||||||||||
| SdhcpServerServiceStatus | 1.3.6.1.4.1.259.10.1.5.1.10.11.3.8 | EnabledStatus | RW | ||||||||||
scalar · EnabledStatus · read-write · current Setting this to 1 to enable the dhcp server service. Setting this to 2 to disable the dhcp server service. | |||||||||||||
| TdhcpPoolInetTable | 1.3.6.1.4.1.259.10.1.5.1.10.11.3.9 | NA | |||||||||||
table · not-accessible · current A DHCP pool is a collection of user configuration such as option config-lease time or DNS-server IPs, a network address for network pool, or a host IP plus a hardware address pair for host pool. However, a DHCP pool only can either be a network pool or a host pool, or none of them (such as that pool only containing option config no network address config or a host IP config as well). | |||||||||||||
| RdhcpPoolInetEntry | 1.3.6.1.4.1.259.10.1.5.1.10.11.3.9.1 | NA | |||||||||||
| CdhcpPoolInetPoolName | 1.3.6.1.4.1.259.10.1.5.1.10.11.3.9.1.1 | DisplayString (SIZE (1..8)) | NA | ||||||||||
column · DisplayString (SIZE (1..8)) · not-accessible · current Pool name, simply specify a string with its length NO MORE THAN 8. | |||||||||||||
| CdhcpPoolInetPoolType | 1.3.6.1.4.1.259.10.1.5.1.10.11.3.9.1.2 | INTEGER | RC | ||||||||||
column · INTEGER · read-create · current Pool type: notSpecify(1), netWork(2), host(3).
| |||||||||||||
| CdhcpPoolInetAddressType | 1.3.6.1.4.1.259.10.1.5.1.10.11.3.9.1.3 | InetAddressType | RC | ||||||||||
column · InetAddressType · read-create · current Pool address type | |||||||||||||
| CdhcpPoolInetAddress | 1.3.6.1.4.1.259.10.1.5.1.10.11.3.9.1.4 | InetAddress | RC | ||||||||||
column · InetAddress · read-create · current Pool address | |||||||||||||
| CdhcpPoolInetSubnetMaskType | 1.3.6.1.4.1.259.10.1.5.1.10.11.3.9.1.5 | InetAddressType | RC | ||||||||||
column · InetAddressType · read-create · current subnet mask type | |||||||||||||
| CdhcpPoolInetSubnetMask | 1.3.6.1.4.1.259.10.1.5.1.10.11.3.9.1.6 | InetAddress | RC | ||||||||||
column · InetAddress · read-create · current subnet mask | |||||||||||||
| CdhcpPoolInetHardwareType | 1.3.6.1.4.1.259.10.1.5.1.10.11.3.9.1.7 | INTEGER | RC | ||||||||||
column · INTEGER · read-create · current Hardware type: notSpecify(1), ethernet(2), ieee802(3) ,fddi(4).
| |||||||||||||
| CdhcpPoolInetMacAddress | 1.3.6.1.4.1.259.10.1.5.1.10.11.3.9.1.8 | OCTET STRING (SIZE (6)) | RC | ||||||||||
column · OCTET STRING (SIZE (6)) · read-create · current MAC address. | |||||||||||||
| CdhcpPoolInetStatus | 1.3.6.1.4.1.259.10.1.5.1.10.11.3.9.1.9 | ValidStatus | RC | ||||||||||
column · ValidStatus · read-create · current Setting this to valid(1) creates an entry. Setting this to invalid(2) destroys an entry. | |||||||||||||
| TdhcpPoolInetOptionTable | 1.3.6.1.4.1.259.10.1.5.1.10.11.3.10 | NA | |||||||||||
table · not-accessible · current This is the Option table of the dhcpPoolTable, user can specify options configuration in this table. | |||||||||||||
| RdhcpPoolInetOptionEntry | 1.3.6.1.4.1.259.10.1.5.1.10.11.3.10.1 | NA | |||||||||||
row · not-accessible · current A conceptual row of dhcpPoolOptionTable. | |||||||||||||
| CdhcpPoolInetOptionPoolName | 1.3.6.1.4.1.259.10.1.5.1.10.11.3.10.1.1 | DisplayString (SIZE (1..8)) | NA | ||||||||||
column · DisplayString (SIZE (1..8)) · not-accessible · current Pool name, simply specify a string with its length NO MORE THAN 8. | |||||||||||||
| CdhcpPoolInetOptionNextServerAddrType | 1.3.6.1.4.1.259.10.1.5.1.10.11.3.10.1.2 | InetAddressType | RW | ||||||||||
column · InetAddressType · read-write · current Specifies the INET address type of the next server in the boot process. | |||||||||||||
| CdhcpPoolInetOptionNextServerAddr | 1.3.6.1.4.1.259.10.1.5.1.10.11.3.10.1.3 | InetAddress | RW | ||||||||||
column · InetAddress · read-write · current Specifies the INET address of the next server in the boot process, which is typically a Trivial File Transfer Protocol(TFTP) server. One INET address is required. | |||||||||||||
| CdhcpPoolInetOptionNetbiosNodeType | 1.3.6.1.4.1.259.10.1.5.1.10.11.3.10.1.4 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Specifies the NetBIOS node type. Valid types are: none(1) b-node(2) - Broadcast p-node(3) - Peer-to-peer m-node(4) - Mixed h-node(5) - Hybrid.
| |||||||||||||
| CdhcpPoolInetOptionDomainName | 1.3.6.1.4.1.259.10.1.5.1.10.11.3.10.1.5 | DisplayString (SIZE (0..128)) | RW | ||||||||||
column · DisplayString (SIZE (0..128)) · read-write · current Specifies the domain name string. | |||||||||||||
| CdhcpPoolInetOptionBootFile | 1.3.6.1.4.1.259.10.1.5.1.10.11.3.10.1.6 | DisplayString (SIZE (0..128)) | RW | ||||||||||
column · DisplayString (SIZE (0..128)) · read-write · current To specify the name of the default boot image. | |||||||||||||
| CdhcpPoolInetOptionLeaseTime | 1.3.6.1.4.1.259.10.1.5.1.10.11.3.10.1.7 | Integer32 (1..31536000 | 2147483647) | RW | ||||||||||
column · Integer32 (1..31536000 | 2147483647) · read-write · current To configure the duration of the lease, in seconds, of an IP address that is assigned from a DHCP Server to a DHCP client. Valid values are from 1 to 31536000 (365 days), and a large number '7FFFFFFF'h, which is 'practically infinite'.
| |||||||||||||
| CdhcpPoolInetOptionCidMode | 1.3.6.1.4.1.259.10.1.5.1.10.11.3.10.1.8 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Set this variable to text(2) or hex(3) to specify the mode of the client ID, which is useful for CLI to determine the display format of the client ID. The original value of object is set to 'notSpecify(1)'. But setting it to notSpecify(1) is a invalid operation.
| |||||||||||||
| CdhcpPoolInetOptionCidBuffer | 1.3.6.1.4.1.259.10.1.5.1.10.11.3.10.1.9 | OCTET STRING (SIZE (0..128)) | RW | ||||||||||
column · OCTET STRING (SIZE (0..128)) · read-write · current Content of Client Id. dhcpPoolOptionCidMode MUST be specified before setting this variable. | |||||||||||||
| TdhcpPoolInetOptionDnsSerTable | 1.3.6.1.4.1.259.10.1.5.1.10.11.3.11 | NA | |||||||||||
table · not-accessible · current To specify the DNS IP servers available to a DHCP client, you can specify up to two addresses for each DHCP pool. | |||||||||||||
| RdhcpPoolInetOptionDnsSerEntry | 1.3.6.1.4.1.259.10.1.5.1.10.11.3.11.1 | NA | |||||||||||
row · not-accessible · current A conceptual row of dhcpPoolOptionDnsSerTable. | |||||||||||||
| CdhcpPoolInetOptionDnsSerPoolName | 1.3.6.1.4.1.259.10.1.5.1.10.11.3.11.1.1 | DisplayString (SIZE (1..8)) | NA | ||||||||||
column · DisplayString (SIZE (1..8)) · not-accessible · current Pool name, simply specify a string with its length NO MORE THAN 8. | |||||||||||||
| CdhcpPoolInetOptionDnsSerIndex | 1.3.6.1.4.1.259.10.1.5.1.10.11.3.11.1.2 | Integer32 (1..2) | NA | ||||||||||
column · Integer32 (1..2) · not-accessible · current Index of the DNS server. | |||||||||||||
| CdhcpPoolInetOptionDnsSerAddrType | 1.3.6.1.4.1.259.10.1.5.1.10.11.3.11.1.3 | InetAddressType | RW | ||||||||||
column · InetAddressType · read-write · current INET address type of the DNS server. | |||||||||||||
| CdhcpPoolInetOptionDnsSerAddr | 1.3.6.1.4.1.259.10.1.5.1.10.11.3.11.1.4 | InetAddress | RW | ||||||||||
column · InetAddress · read-write · current INET address of the DNS server. | |||||||||||||
| TdhcpPoolOptInetDefaultRouterTable | 1.3.6.1.4.1.259.10.1.5.1.10.11.3.12 | NA | |||||||||||
table · not-accessible · current Specifies the default router list for a DHCP Client, you can specify up to two addresses for each DHCP pool. | |||||||||||||
| RdhcpPoolOptInetDefaultRouterEntry | 1.3.6.1.4.1.259.10.1.5.1.10.11.3.12.1 | NA | |||||||||||
row · not-accessible · current A conceptual row of dhcpPoolOptDefaultRouterTable. | |||||||||||||
| CdhcpPoolOptInetDefaultRouterPoolName | 1.3.6.1.4.1.259.10.1.5.1.10.11.3.12.1.1 | DisplayString (SIZE (1..8)) | NA | ||||||||||
column · DisplayString (SIZE (1..8)) · not-accessible · current Pool name, simply specify a string with its length NO MORE THAN 8. | |||||||||||||
| CdhcpPoolOptInetDefaultRouterIndex | 1.3.6.1.4.1.259.10.1.5.1.10.11.3.12.1.2 | Integer32 (1..2) | NA | ||||||||||
column · Integer32 (1..2) · not-accessible · current Index of the default router. | |||||||||||||
| CdhcpPoolOptInetDefaultRouterAddrType | 1.3.6.1.4.1.259.10.1.5.1.10.11.3.12.1.3 | InetAddressType | RW | ||||||||||
column · InetAddressType · read-write · current Specifies the INET address type of a router. | |||||||||||||
| CdhcpPoolOptInetDefaultRouterAddr | 1.3.6.1.4.1.259.10.1.5.1.10.11.3.12.1.4 | InetAddress | RW | ||||||||||
column · InetAddress · read-write · current Specifies the INET address of a router. | |||||||||||||
| TdhcpPoolOptInetNetbiosServerTable | 1.3.6.1.4.1.259.10.1.5.1.10.11.3.13 | NA | |||||||||||
table · not-accessible · current To configure the NetBIOS WINS name servers that are available to DHCP clients. You can specify up to eight addressed for each DHCP pool. | |||||||||||||
| RdhcpPoolOptInetNetbiosServerEntry | 1.3.6.1.4.1.259.10.1.5.1.10.11.3.13.1 | NA | |||||||||||
row · not-accessible · current A conceptual row of dhcpPoolOptNetbiosServerTable. | |||||||||||||
| CdhcpPoolOptInetNetbiosServerPoolName | 1.3.6.1.4.1.259.10.1.5.1.10.11.3.13.1.1 | DisplayString (SIZE (1..8)) | NA | ||||||||||
column · DisplayString (SIZE (1..8)) · not-accessible · current Pool name, simply specify a string with its length NO MORE THAN 8 | |||||||||||||
| CdhcpPoolOptInetNetbiosServerIndex | 1.3.6.1.4.1.259.10.1.5.1.10.11.3.13.1.2 | Integer32 (1..8) | NA | ||||||||||
column · Integer32 (1..8) · not-accessible · current Index of the NetBIOS name Server. | |||||||||||||
| CdhcpPoolOptInetNetbiosServerAddrType | 1.3.6.1.4.1.259.10.1.5.1.10.11.3.13.1.3 | InetAddressType | RW | ||||||||||
column · InetAddressType · read-write · current Specifies the INET address type of the NetBIOS WINS name server. | |||||||||||||
| CdhcpPoolOptInetNetbiosServerAddr | 1.3.6.1.4.1.259.10.1.5.1.10.11.3.13.1.4 | InetAddress | RW | ||||||||||
column · InetAddress · read-write · current Specifies the INET address of the NetBIOS WINS name server. | |||||||||||||
| TdhcpServerExcludedInetAddrTable | 1.3.6.1.4.1.259.10.1.5.1.10.11.3.14 | NA | |||||||||||
table · not-accessible · current To specify IP addresses that a DHCP Server should not assign to DHCP clients. | |||||||||||||
| RdhcpServerExcludedInetAddrEntry | 1.3.6.1.4.1.259.10.1.5.1.10.11.3.14.1 | NA | |||||||||||
row · not-accessible · current A conceptual row of dhcpServerExcludedIpAddrTable. | |||||||||||||
| CdhcpServerExcludedInetAddrLowAddrType | 1.3.6.1.4.1.259.10.1.5.1.10.11.3.14.1.1 | InetAddressType | NA | ||||||||||
column · InetAddressType · not-accessible · current The excluded INET address type, or first INET address type in an excluded address range. | |||||||||||||
| CdhcpServerExcludedInetAddrLowAddr | 1.3.6.1.4.1.259.10.1.5.1.10.11.3.14.1.2 | InetAddress | NA | ||||||||||
column · InetAddress · not-accessible · current The excluded INET address, or first INET address in an excluded address range. | |||||||||||||
| CdhcpServerExcludedInetAddrHighAddrType | 1.3.6.1.4.1.259.10.1.5.1.10.11.3.14.1.3 | InetAddressType | NA | ||||||||||
column · InetAddressType · not-accessible · current The last INET address type in the excluded address range. | |||||||||||||
| CdhcpServerExcludedInetAddrHighAddr | 1.3.6.1.4.1.259.10.1.5.1.10.11.3.14.1.4 | InetAddress | NA | ||||||||||
column · InetAddress · not-accessible · current The last INET address in the excluded address range. | |||||||||||||
| CdhcpServerExcludedInetAddrStatus | 1.3.6.1.4.1.259.10.1.5.1.10.11.3.14.1.5 | ValidStatus | RC | ||||||||||
column · ValidStatus · read-create · current Setting this to valid(1) creates an entry. Setting this to invalid(2) destroys an entry. | |||||||||||||
| TdhcpServerInetLeaseBindingTable | 1.3.6.1.4.1.259.10.1.5.1.10.11.3.15 | NA | |||||||||||
table · not-accessible · current To configure the address bindings on the DHCP server. | |||||||||||||
| RdhcpServerInetLeaseBindingEntry | 1.3.6.1.4.1.259.10.1.5.1.10.11.3.15.1 | NA | |||||||||||
row · not-accessible · current A conceptual row of dhcpServerLeaseBindingTable. | |||||||||||||
| CdhcpServerInetLeaseBindingAddrType | 1.3.6.1.4.1.259.10.1.5.1.10.11.3.15.1.1 | InetAddressType | NA | ||||||||||
column · InetAddressType · not-accessible · current The INET address type of the host as recorded on the DHCP server. | |||||||||||||
| CdhcpServerInetLeaseBindingAddr | 1.3.6.1.4.1.259.10.1.5.1.10.11.3.15.1.2 | InetAddress | NA | ||||||||||
column · InetAddress · not-accessible · current The INET address of the host as recorded on the DHCP server. | |||||||||||||
| CdhcpServerInetLeaseBindingMac | 1.3.6.1.4.1.259.10.1.5.1.10.11.3.15.1.3 | OCTET STRING (SIZE (6)) | RO | ||||||||||
column · OCTET STRING (SIZE (6)) · read-only · current The MAC address of the host as recorded on the DHCP Server. | |||||||||||||
| CdhcpServerInetLeaseBindingLeaseTime | 1.3.6.1.4.1.259.10.1.5.1.10.11.3.15.1.4 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current The lease expiration date of the INET address of the host. | |||||||||||||
| CdhcpServerInetLeaseBindingStartTime | 1.3.6.1.4.1.259.10.1.5.1.10.11.3.15.1.5 | DisplayString (SIZE (20)) | RO | ||||||||||
column · DisplayString (SIZE (20)) · read-only · current Show current system real time in sec. | |||||||||||||
| CdhcpServerInetLeaseBindingStatus | 1.3.6.1.4.1.259.10.1.5.1.10.11.3.15.1.6 | ValidStatus | RC | ||||||||||
column · ValidStatus · read-create · current Setting this to valid(1) creates an entry. Setting this to invalid(2) destroys an entry. | |||||||||||||
| NpingMgt | 1.3.6.1.4.1.259.10.1.5.1.10.15 | ||||||||||||
| SpingIpAddress | 1.3.6.1.4.1.259.10.1.5.1.10.15.1 | IpAddress | RW | ||||||||||
scalar · IpAddress · read-write · current Specifies the IP address of the device that is planned to ping. | |||||||||||||
| SpingPacketSize | 1.3.6.1.4.1.259.10.1.5.1.10.15.2 | Integer32 (32..512) | RW | ||||||||||
scalar · Integer32 (32..512) · read-write · current Specifies the size of each data potion of ping packets in bytes. | |||||||||||||
| SpingCompleted | 1.3.6.1.4.1.259.10.1.5.1.10.15.4 | TruthValue | RO | ||||||||||
scalar · TruthValue · read-only · current A value of true(1) will be read when this ping operation has been either responded to or changed to the time-out status. A value of false(2) will be read when there is a ping operation running and all associated objects in the pingMgt operation cannot be modified during this period. | |||||||||||||
| SpingAction | 1.3.6.1.4.1.259.10.1.5.1.10.15.5 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current The action of the pingMgt operation. Sets these objects to pingStart(2) to begin the ping operation. Once the action is set to pingStart(2), the associated pingMgt objects cannot be modified until this ping operation is completed (pingCompleted is true). When the ping has ended or there is no ping operation performing, this object will get a value of noAction(1).
| |||||||||||||
| SpingProbeCount | 1.3.6.1.4.1.259.10.1.5.1.10.15.6 | Integer32 (1..16) | RW | ||||||||||
scalar · Integer32 (1..16) · read-write · current Specifies the number of times to perform a ping operation at a remote host. | |||||||||||||
| SpingSentPackets | 1.3.6.1.4.1.259.10.1.5.1.10.15.7 | Integer32 | RO | ||||||||||
scalar · Integer32 · read-only · current The value of this object reflects the number of probes sent. The value of this object must be reported as 0 when no probes have been sent. | |||||||||||||
| SpingReceivedPackets | 1.3.6.1.4.1.259.10.1.5.1.10.15.8 | Integer32 | RO | ||||||||||
scalar · Integer32 · read-only · current Number of responses received. The value of this object must be reported as 0 when no probe responses have been received. | |||||||||||||
| SpingPacketLossRate | 1.3.6.1.4.1.259.10.1.5.1.10.15.9 | Integer32 (0..100) | RO | ||||||||||
scalar · Integer32 (0..100) · read-only · current Packet loss rate of this ping operation. This variable is calculated by pingReceivedPackets and pingSentPackets. The rate is expressed as a percentage. | |||||||||||||
| TpingHistoryTable | 1.3.6.1.4.1.259.10.1.5.1.10.15.10 | NA | |||||||||||
table · not-accessible · current Contains the executive result information for the ping operation. | |||||||||||||
| RpingHistoryEntry | 1.3.6.1.4.1.259.10.1.5.1.10.15.10.1 | NA | |||||||||||
| CpingHistoryIndex | 1.3.6.1.4.1.259.10.1.5.1.10.15.10.1.1 | Integer32 | NA | ||||||||||
column · Integer32 · not-accessible · current A new entry in this table is created when the result of a ping probe is determined. The old entries will be cleared when a new ping action is started. | |||||||||||||
| CpingHistoryResponse | 1.3.6.1.4.1.259.10.1.5.1.10.15.10.1.2 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current This variable represents the round trip time and is measured in milliseconds. The variable is the difference between received time and sent time for a ping probe. If the difference value is more than the time-out value or no response is received, then the variable will be 5000 milliseconds.
| |||||||||||||
| TiPAddrTable | 1.3.6.1.4.1.259.10.1.5.1.10.16 | NA | |||||||||||
table · not-accessible · current A table of iPAddrEntry. | |||||||||||||
| RiPAddrEntry | 1.3.6.1.4.1.259.10.1.5.1.10.16.1 | NA | |||||||||||
row · not-accessible · current A set of configuration parameters for a particular network interface on this device. If the device has no network interface, this table is empty. The index is composed of the ifIndex assigned to the corresponding interface. | |||||||||||||
| CiPAddrIfIndex | 1.3.6.1.4.1.259.10.1.5.1.10.16.1.1 | Integer32 | NA | ||||||||||
column · Integer32 · not-accessible · current The VLAN interface being used by this table entry. Only the VLAN interfaces which have an IP configured will appear in the table. | |||||||||||||
| CiPAddrIPAddress | 1.3.6.1.4.1.259.10.1.5.1.10.16.1.2 | IpAddress | NA | ||||||||||
column · IpAddress · not-accessible · current The IP address of this Net interface. The default value for this object is 0.0.0.0. If either the IPAddrIPAddress or IPAddrSubnetMask is 0.0.0.0, then when the device boots, it may use BOOTP to try to figure out what these values should be. If BOOTP fails, before the device can talk on the network, this value must be configured (e.g., through a terminal attached to the device). | |||||||||||||
| CiPAddrSubnetMask | 1.3.6.1.4.1.259.10.1.5.1.10.16.1.3 | IpAddress | NA | ||||||||||
column · IpAddress · not-accessible · current The subnet mask of this Net interface. The default value for this object is 0.0.0.0. If either the IPAddrIPAddress or IPAddrSubnetMask are 0.0.0.0, then when the device boots, it may use BOOTP to try to figure out what these values should be. If BOOTP fails, before the device can talk on the network, this value must be configured (e.g., through a terminal attached to the device). | |||||||||||||
| CiPAddrPrimaryInterface | 1.3.6.1.4.1.259.10.1.5.1.10.16.1.4 | INTEGER | RC | ||||||||||
column · INTEGER · read-create · current Whether this is a primary interface.
| |||||||||||||
| CiPAddrUnnumbered | 1.3.6.1.4.1.259.10.1.5.1.10.16.1.5 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current Whether this is an unnumbered interface.
| |||||||||||||
| CiPAddrStatus | 1.3.6.1.4.1.259.10.1.5.1.10.16.1.6 | RowStatus | RC | ||||||||||
column · RowStatus · read-create · current The status of this conceptual row entry. This object isused to manage the
creation and deletion of conceptual rows.
The status column has six defined values:
- 'active', which indicates that the conceptual row is
available for use by the managed device;
- 'notInService', which indicates that the conceptual
row exists in the agent, but is unavailable for use by
the managed device (see NOTE below);
- 'notReady', which indicates that the conceptual row
exists in the agent, but is missing information
necessary in order to be available for use by the
managed device;
- 'createAndGo', which is supplied by a management
station wishing to create a new instance of a
conceptual row and to have its status automatically set
to active, making it available for use by the managed
device;
- 'createAndWait', which is supplied by a management
station wishing to create a new instance of a
conceptual row (but not make it available for use by
the managed device); and,
- 'destroy', which is supplied by a management station
wishing to delete all of the instances associated with
an existing conceptual row.
Whereas five of the six values (all except 'notReady') may
be specified in a management protocol set operation, only
three values will be returned in response to a management
protocol retrieval operation: 'notReady', 'notInService' or
'active'. That is, when queried, an existing conceptual row
has only three states: it is either available for use by
the managed device (the status column has value 'active');
it is not available for use by the managed device, though
the agent has sufficient information to make it so (the
status column has value 'notInService'); or, it is not
available for use by the managed device, and an attempt to
make it so would fail because the agent has insufficient
information (the state column has value 'notReady').
For a detailed description of this object, please refer to
SNMPv2-TC MIB. | |||||||||||||
| NvlanMgt | 1.3.6.1.4.1.259.10.1.5.1.12 | ||||||||||||
| TvlanTable | 1.3.6.1.4.1.259.10.1.5.1.12.1 | NA | |||||||||||
table · not-accessible · current Table for VLAN configuration. | |||||||||||||
| RvlanEntry | 1.3.6.1.4.1.259.10.1.5.1.12.1.1 | NA | |||||||||||
| CvlanIndex | 1.3.6.1.4.1.259.10.1.5.1.12.1.1.1 | Unsigned32 | NA | ||||||||||
column · Unsigned32 · not-accessible · current Based on dot1qVlanIndex in the Q-BRIDGE-MIB. This table has only one entry - the entry for the VLAN of the management interface. | |||||||||||||
| CvlanAddressMethod | 1.3.6.1.4.1.259.10.1.5.1.12.1.1.2 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Method to get the IP address.
| |||||||||||||
| TvlanPortTable | 1.3.6.1.4.1.259.10.1.5.1.12.2 | NA | |||||||||||
table · not-accessible · current Table for port configuration in VLAN. | |||||||||||||
| RvlanPortEntry | 1.3.6.1.4.1.259.10.1.5.1.12.2.1 | NA | |||||||||||
| CvlanPortIndex | 1.3.6.1.4.1.259.10.1.5.1.12.2.1.1 | Integer32 | NA | ||||||||||
column · Integer32 · not-accessible · current The port and the trunk (excluding trunk members) interface of the portTable. The interface identified by a particular value of this index is the same interface as identified by the same value of dot1qPvid in the Q-BRIDGE-MIB. | |||||||||||||
| CvlanPortMode | 1.3.6.1.4.1.259.10.1.5.1.12.2.1.2 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current This variable sets the 802.1Q VLAN mode. Setting it to hybrid(1) sets a hybrid link. Setting it to dot1qTrunk(2) sets a trunk link. Setting it to access(3) sets an access link.
| |||||||||||||
| CvlanPortPrivateVlanType | 1.3.6.1.4.1.259.10.1.5.1.12.2.1.3 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current The port type defined for private VLAN.
| |||||||||||||
| NvoiceVlanMgt | 1.3.6.1.4.1.259.10.1.5.1.12.6 | ||||||||||||
| TvoiceVlanOuiTable | 1.3.6.1.4.1.259.10.1.5.1.12.6.1 | NA | |||||||||||
table · not-accessible · current A table containing the mac address which can be identified by voice vlan. | |||||||||||||
| RvoiceVlanOuiEntry | 1.3.6.1.4.1.259.10.1.5.1.12.6.1.1 | NA | |||||||||||
row · not-accessible · current A table containing the mac address which can be identified by voice vlan.
| |||||||||||||
| CvoiceVlanOuiAddress | 1.3.6.1.4.1.259.10.1.5.1.12.6.1.1.1 | MacAddress | RO | ||||||||||
column · MacAddress · read-only · current MAC address can be identified by voice vlan. | |||||||||||||
| CvoiceVlanOuiMask | 1.3.6.1.4.1.259.10.1.5.1.12.6.1.1.2 | MacAddress | RW | ||||||||||
column · MacAddress · read-write · current The mask of MAC address. | |||||||||||||
| CvoiceVlanOuiDescription | 1.3.6.1.4.1.259.10.1.5.1.12.6.1.1.3 | DisplayString (SIZE (0..30)) | RW | ||||||||||
column · DisplayString (SIZE (0..30)) · read-write · current The description of oui. | |||||||||||||
| CvoiceVlanOuiStatus | 1.3.6.1.4.1.259.10.1.5.1.12.6.1.1.4 | ValidStatus | RC | ||||||||||
column · ValidStatus · read-create · current Current operation status of the row. | |||||||||||||
| SvoiceVlanEnabledId | 1.3.6.1.4.1.259.10.1.5.1.12.6.2 | Integer32 | RW | ||||||||||
scalar · Integer32 · read-write · current Voice vlan enable status: enabled (2..4094), disabled (-1). | |||||||||||||
| SvoiceVlanAgingTime | 1.3.6.1.4.1.259.10.1.5.1.12.6.3 | Integer32 (5..43200) | RW | ||||||||||
scalar · Integer32 (5..43200) · read-write · current Voice vlan aging time, the unit of which is minute. | |||||||||||||
| TvoiceVlanPortTable | 1.3.6.1.4.1.259.10.1.5.1.12.6.7 | NA | |||||||||||
table · not-accessible · current A list of voice vlan mode entries. | |||||||||||||
| RvoiceVlanPortEntry | 1.3.6.1.4.1.259.10.1.5.1.12.6.7.1 | NA | |||||||||||
row · not-accessible · current An entry containing voice vlan mode information, which is applicable to a voice vlan enabled interface.
| |||||||||||||
| CvoiceVlanPortIfIndex | 1.3.6.1.4.1.259.10.1.5.1.12.6.7.1.1 | Integer32 (1..2147483647) | NA | ||||||||||
column · Integer32 (1..2147483647) · not-accessible · current The index of interface on which voice vlan function is enabled. | |||||||||||||
| CvoiceVlanPortMode | 1.3.6.1.4.1.259.10.1.5.1.12.6.7.1.2 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Voice vlan configuration mode status.
| |||||||||||||
| CvoiceVlanPortSecurity | 1.3.6.1.4.1.259.10.1.5.1.12.6.7.1.3 | EnabledStatus | RW | ||||||||||
column · EnabledStatus · read-write · current If the security is enabled, the port is only allow voice traffuc for the voice vlan. | |||||||||||||
| CvoiceVlanPortPriority | 1.3.6.1.4.1.259.10.1.5.1.12.6.7.1.4 | Integer32 (0..6) | RW | ||||||||||
column · Integer32 (0..6) · read-write · current The priority of the voice vlan traffic in the port. | |||||||||||||
| CvoiceVlanPortRuleOui | 1.3.6.1.4.1.259.10.1.5.1.12.6.7.1.5 | EnabledStatus | RW | ||||||||||
column · EnabledStatus · read-write · current The address of voice device is learned from Oui table. | |||||||||||||
| CvoiceVlanPortRuleLldp | 1.3.6.1.4.1.259.10.1.5.1.12.6.7.1.6 | EnabledStatus | RW | ||||||||||
column · EnabledStatus · read-write · current The address of voice device is learned from LLDP discovery. | |||||||||||||
| NvlanDot1qTunnelGlobalConfig | 1.3.6.1.4.1.259.10.1.5.1.12.8 | ||||||||||||
| SvlanDot1qTunnelStatus | 1.3.6.1.4.1.259.10.1.5.1.12.8.1 | EnabledStatus | RW | ||||||||||
scalar · EnabledStatus · read-write · current This parameter is used to globally enable/disable 802.1Q Tunneling on the device. | |||||||||||||
| TvlanDot1qTunnelPortTable | 1.3.6.1.4.1.259.10.1.5.1.12.9 | NA | |||||||||||
table · not-accessible · current Table for port configuration in 802.1Q Tunneling. | |||||||||||||
| RvlanDot1qTunnelPortEntry | 1.3.6.1.4.1.259.10.1.5.1.12.9.1 | NA | |||||||||||
row · not-accessible · current Entry for port configuration in 802.1Q Tunneling. | |||||||||||||
| CvlanDot1qTunnelPortIndex | 1.3.6.1.4.1.259.10.1.5.1.12.9.1.1 | Integer32 | NA | ||||||||||
column · Integer32 · not-accessible · current The port and the trunk (excluding trunk members) interface of the portTable. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex in the IF-MIB. | |||||||||||||
| CvlanDot1qTunnelPortMode | 1.3.6.1.4.1.259.10.1.5.1.12.9.1.2 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current This variable sets the 802.1Q Tunneling mode. Setting it to none(1) indicates no mode in this port. Setting it to access(2) sets as dot1q-tunnel mode port which link to customer. Setting it to uplink(3) sets as dot1q-tunnel mode port which link to service-provider. If vlanDot1qTunnelStatus is disabled, it means vlanDot1qTunnelPortMode is inactive.
| |||||||||||||
| CvlanDot1qTunnelPortEtherType | 1.3.6.1.4.1.259.10.1.5.1.12.9.1.3 | Unsigned32 (2048..65535) | RW | ||||||||||
column · Unsigned32 (2048..65535) · read-write · current TPID for 802.1Q encapsulation. It's used to select a nonstandard (nondefault) 2-byte ethertype to identify 802.1Q tagged frames. | |||||||||||||
| TmacVlanTable | 1.3.6.1.4.1.259.10.1.5.1.12.11 | NA | |||||||||||
table · not-accessible · current A table that contains the settings for MAC-based VLAN. | |||||||||||||
| RmacVlanEntry | 1.3.6.1.4.1.259.10.1.5.1.12.11.1 | NA | |||||||||||
| CmacVlanMacAddress | 1.3.6.1.4.1.259.10.1.5.1.12.11.1.1 | MacAddress | NA | ||||||||||
column · MacAddress · not-accessible · current The MAC address that may specify an entry in the table which contains MAC-based VLAN information. | |||||||||||||
| CmacVlanId | 1.3.6.1.4.1.259.10.1.5.1.12.11.1.2 | Integer32 (1..4092) | RC | ||||||||||
column · Integer32 (1..4092) · read-create · current Specifies the VLAN ID which the MAC address associates with. | |||||||||||||
| CmacVlanPriority | 1.3.6.1.4.1.259.10.1.5.1.12.11.1.3 | Integer32 (0..7) | RC | ||||||||||
column · Integer32 (0..7) · read-create · current Specifies the priority whcich the MAC address associates with. | |||||||||||||
| CmacVlanStatus | 1.3.6.1.4.1.259.10.1.5.1.12.11.1.4 | ValidStatus | RC | ||||||||||
column · ValidStatus · read-create · current Set this to valid(1) to create an entry. Set this to invalid(2) to destroy an entry. | |||||||||||||
| SmacVlanClearAction | 1.3.6.1.4.1.259.10.1.5.1.12.12 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Action for clearing macVlanTable. When this object is set to clear(2), all entries in macVlanTable will be cleared. When this object is read, the value of this object is always noClear(1).
| |||||||||||||
| TsubnetVlanTable | 1.3.6.1.4.1.259.10.1.5.1.12.13 | NA | |||||||||||
table · not-accessible · current A table that contains the settings for IP subnet-based VLAN. | |||||||||||||
| RsubnetVlanEntry | 1.3.6.1.4.1.259.10.1.5.1.12.13.1 | NA | |||||||||||
row · not-accessible · current A conceptual row in the subnetVlanTable. | |||||||||||||
| CsubnetVlanIpAddress | 1.3.6.1.4.1.259.10.1.5.1.12.13.1.1 | IpAddress | NA | ||||||||||
column · IpAddress · not-accessible · current The IPv4 address of a subnet. Any assignment (implicit or otherwise) of an instance of this object to a value x must be rejected if the bitwise logical-AND of x with the value of the corresponding instance of the subnetVlanMask object is not equal to x. | |||||||||||||
| CsubnetVlanMask | 1.3.6.1.4.1.259.10.1.5.1.12.13.1.2 | IpAddress | NA | ||||||||||
column · IpAddress · not-accessible · current The netmask of a subnet. Any assignment (implicit or otherwise) of an instance of this object to a value x must be rejected if the bitwise logical-AND of x with the value of the corresponding instance of the subnetVlanIpAddress object is not equal to subnetVlanIpAddress. | |||||||||||||
| CsubnetVlanId | 1.3.6.1.4.1.259.10.1.5.1.12.13.1.3 | Integer32 (1..4094) | RC | ||||||||||
column · Integer32 (1..4094) · read-create · current Specifies the VLAN ID which the subnet associates with. | |||||||||||||
| CsubnetVlanPriority | 1.3.6.1.4.1.259.10.1.5.1.12.13.1.4 | Integer32 (0..7) | RC | ||||||||||
column · Integer32 (0..7) · read-create · current Specifies the priority whcich the subnet associates with. | |||||||||||||
| CsubnetVlanStatus | 1.3.6.1.4.1.259.10.1.5.1.12.13.1.5 | ValidStatus | RC | ||||||||||
column · ValidStatus · read-create · current Set this to valid(1) to create an entry. Set this to invalid(2) to destroy an entry. | |||||||||||||
| SsubnetVlanClearAction | 1.3.6.1.4.1.259.10.1.5.1.12.14 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Action for clearing subnetVlanTable. When this object is set to clear(2), all entries in subnetVlanTable will be cleared. When this object is read, the value of this object is always noClear(1).
| |||||||||||||
| TvlanStaticTable | 1.3.6.1.4.1.259.10.1.5.1.12.17 | NA | |||||||||||
table · not-accessible · current Table for static VLAN configuration including VLAN aggregation support. | |||||||||||||
| RvlanStaticEntry | 1.3.6.1.4.1.259.10.1.5.1.12.17.1 | NA | |||||||||||
row · not-accessible · current Static information for a VLAN configured on the device by (local or network) management.
| |||||||||||||
| CvlanStaticIndex | 1.3.6.1.4.1.259.10.1.5.1.12.17.1.1 | VlanIndex | NA | ||||||||||
column · VlanIndex · not-accessible · current The VLAN ID of the VLAN. | |||||||||||||
| CvlanStaticInterfaceType | 1.3.6.1.4.1.259.10.1.5.1.12.17.1.2 | INTEGER | RC | ||||||||||
column · INTEGER · read-create · current The interface type of the VLAN (there is a subtype of IANAifType). l2vlan(135) refers to L2 interface and can't accept any L3 related configuration. l3ipvlan(136) refers to L3 interface and can accept L3 related configuration.
| |||||||||||||
| TvlanDot1qTunnelSrvCvidPortTable | 1.3.6.1.4.1.259.10.1.5.1.12.18 | NA | |||||||||||
table · not-accessible · current Table for port configuration to specify how to insert outer tag by matching customer VLAN ID. | |||||||||||||
| RvlanDot1qTunnelSrvCvidPortEntry | 1.3.6.1.4.1.259.10.1.5.1.12.18.1 | NA | |||||||||||
row · not-accessible · current Entry for port configuration to specify how to insert outer tag by matching customer VLAN ID. | |||||||||||||
| CvlanDot1qTunnelSrvCvidPortIndex | 1.3.6.1.4.1.259.10.1.5.1.12.18.1.1 | InterfaceIndex | NA | ||||||||||
column · InterfaceIndex · not-accessible · current The port interface of the vlanDot1qTunnelSrvCvidPortTable. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex in the IF-MIB. | |||||||||||||
| CvlanDot1qTunnelSrvCvidPortCvid | 1.3.6.1.4.1.259.10.1.5.1.12.18.1.2 | VlanIndex | NA | ||||||||||
column · VlanIndex · not-accessible · current Specifies customer VLAN ID. | |||||||||||||
| CvlanDot1qTunnelSrvCvidPortSvid | 1.3.6.1.4.1.259.10.1.5.1.12.18.1.3 | VlanId | RC | ||||||||||
column · VlanId · read-create · current Specifies service VLAN ID. | |||||||||||||
| CvlanDot1qTunnelSrvCvidPortStatus | 1.3.6.1.4.1.259.10.1.5.1.12.18.1.5 | ValidStatus | RC | ||||||||||
column · ValidStatus · read-create · current Sets to valid(1) to create an entry. Sets to invalid(2) to destroy an entry. | |||||||||||||
| CvlanDot1qTunnelSrvCvidPortAction | 1.3.6.1.4.1.259.10.1.5.1.12.18.1.6 | Bits | RC | ||||||||||
column · Bits · read-create · current Sets to assignSvid(2) to assign service VLAN ID. Sets to removeCtag(4) to remove customer VLAN tag.
| |||||||||||||
| NpriorityMgt | 1.3.6.1.4.1.259.10.1.5.1.13 | ||||||||||||
| TprioWrrPortTable | 1.3.6.1.4.1.259.10.1.5.1.13.12 | NA | |||||||||||
table · not-accessible · current Table for per port weighted round robin (WRR). | |||||||||||||
| RprioWrrPortEntry | 1.3.6.1.4.1.259.10.1.5.1.13.12.1 | NA | |||||||||||
row · not-accessible · current Entry for per port weighted round robin (WRR). | |||||||||||||
| CprioWrrPortIfIndex | 1.3.6.1.4.1.259.10.1.5.1.13.12.1.1 | Integer32 | NA | ||||||||||
column · Integer32 · not-accessible · current The port interface of the prioWrrPortEntry. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex in the IF-MIB. | |||||||||||||
| CprioWrrPortTrafficClass | 1.3.6.1.4.1.259.10.1.5.1.13.12.1.2 | Integer32 (0..7) | NA | ||||||||||
column · Integer32 (0..7) · not-accessible · current Traffic class for this entry, as defined in dot1dTrafficClass in the P-BRIDGE-MIB. The actual maximum depends on the hardware, and is equal to dot1dPortNumTrafficClasses-1. | |||||||||||||
| CprioWrrPortWeight | 1.3.6.1.4.1.259.10.1.5.1.13.12.1.3 | Integer32 (1..15) | RW | ||||||||||
column · Integer32 (1..15) · read-write · current Weight for this entry. | |||||||||||||
| TprioSchedModePortTable | 1.3.6.1.4.1.259.10.1.5.1.13.15 | NA | |||||||||||
table · not-accessible · current Table for per port scheduling mode. | |||||||||||||
| RprioSchedModePortEntry | 1.3.6.1.4.1.259.10.1.5.1.13.15.1 | NA | |||||||||||
| CprioSchedModePortIndex | 1.3.6.1.4.1.259.10.1.5.1.13.15.1.1 | Integer32 | NA | ||||||||||
column · Integer32 · not-accessible · current The port interface of the prioSchedModePortEntry. | |||||||||||||
| CprioSchedModePort | 1.3.6.1.4.1.259.10.1.5.1.13.15.1.2 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current The scheduling mode status of ethernet port. wrr(1), strict(2), strict-wrr(4)
| |||||||||||||
| NtrapDestMgt | 1.3.6.1.4.1.259.10.1.5.1.14 | ||||||||||||
| TtrapDestTable | 1.3.6.1.4.1.259.10.1.5.1.14.1 | NA | |||||||||||
table · not-accessible · current A list of trap destination entries. | |||||||||||||
| RtrapDestEntry | 1.3.6.1.4.1.259.10.1.5.1.14.1.1 | NA | |||||||||||
row · not-accessible · current A destination entry describes the destination IP address, the community string, and SNMP version to use when sending a trap.
| |||||||||||||
| CtrapDestAddress | 1.3.6.1.4.1.259.10.1.5.1.14.1.1.1 | IpAddress | NA | ||||||||||
column · IpAddress · not-accessible · current The address to send traps. | |||||||||||||
| CtrapDestCommunity | 1.3.6.1.4.1.259.10.1.5.1.14.1.1.2 | OCTET STRING (SIZE (0..127)) | RC | ||||||||||
column · OCTET STRING (SIZE (0..127)) · read-create · current A community to which this destination address belongs. | |||||||||||||
| CtrapDestStatus | 1.3.6.1.4.1.259.10.1.5.1.14.1.1.3 | ValidStatus | RC | ||||||||||
column · ValidStatus · read-create · current Setting this to valid(1) creates an entry. Setting this to invalid(2) destroys an entry. | |||||||||||||
| CtrapDestVersion | 1.3.6.1.4.1.259.10.1.5.1.14.1.1.4 | INTEGER | RC | ||||||||||
column · INTEGER · read-create · current Determines the version of the trap that is to be sent to the trap receiver. If the value is 1, then an SNMP version 1 trap is sent and if the value is 2, an SNMP version 2 trap is sent.
| |||||||||||||
| CtrapDestUdpPort | 1.3.6.1.4.1.259.10.1.5.1.14.1.1.5 | Integer32 (1..65535) | RC | ||||||||||
column · Integer32 (1..65535) · read-create · current Determines the UDP port number that the trap will be sent to. | |||||||||||||
| NtrapVar | 1.3.6.1.4.1.259.10.1.5.1.14.2 | ||||||||||||
| StrapIpFilterRejectMode | 1.3.6.1.4.1.259.10.1.5.1.14.2.6 | INTEGER | AN | ||||||||||
scalar · INTEGER · accessible-for-notify · current This variable is for trap var binding, indicated the ipfilter reject mode. web(1), snmp(2), telnet(3).
| |||||||||||||
| StrapIpFilterRejectIp | 1.3.6.1.4.1.259.10.1.5.1.14.2.7 | IpAddress | AN | ||||||||||
scalar · IpAddress · accessible-for-notify · current This variable is for trap var binding, indicating the IP address that rejected by the ipfilter. | |||||||||||||
| StrapLoginMode | 1.3.6.1.4.1.259.10.1.5.1.14.2.19 | INTEGER | AN | ||||||||||
scalar · INTEGER · accessible-for-notify · current This variable is for trap var binding, indicated the login mode. console(1), telnet(2), web(3).
| |||||||||||||
| StrapLoginUsername | 1.3.6.1.4.1.259.10.1.5.1.14.2.20 | DisplayString | AN | ||||||||||
scalar · DisplayString · accessible-for-notify · current This variable is for trap var binding, indicating the login username. | |||||||||||||
| StrapLoginIp | 1.3.6.1.4.1.259.10.1.5.1.14.2.21 | Integer32 | AN | ||||||||||
scalar · Integer32 · accessible-for-notify · current This variable is for trap var binding, indicating the login IP address. | |||||||||||||
| NqosMgt | 1.3.6.1.4.1.259.10.1.5.1.16 | ||||||||||||
| NrateLimitMgt | 1.3.6.1.4.1.259.10.1.5.1.16.1 | ||||||||||||
| TrateLimitPortTable | 1.3.6.1.4.1.259.10.1.5.1.16.1.2 | NA | |||||||||||
table · not-accessible · current Table for rate limit of each port. | |||||||||||||
| RrateLimitPortEntry | 1.3.6.1.4.1.259.10.1.5.1.16.1.2.1 | NA | |||||||||||
| CrlPortIndex | 1.3.6.1.4.1.259.10.1.5.1.16.1.2.1.1 | Integer32 | NA | ||||||||||
column · Integer32 · not-accessible · current The port and the trunk (including trunk member) interface of the portTable. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex in the IF-MIB. | |||||||||||||
| CrlPortInputLimit | 1.3.6.1.4.1.259.10.1.5.1.16.1.2.1.2 | Integer32 | RW | ||||||||||
column · Integer32 · read-write · current Value of the input rate limit. Its unit is megabits per second. For a 100 Mbps port, the range is 1 to 100. For a 1000 Mbps port, the range is 1 to 1000. For a 10 Gbps port, the range is 1 to 10000. | |||||||||||||
| CrlPortOutputLimit | 1.3.6.1.4.1.259.10.1.5.1.16.1.2.1.3 | Integer32 | RW | ||||||||||
column · Integer32 · read-write · current Value of the output rate limit. Its unit is megabits per second. For a 100 Mbps port, the range is 1 to 100. For a 1000 Mbps port, the range is 1 to 1000. For a 10 Gbps port, the range is 1 to 10000. | |||||||||||||
| CrlPortInputStatus | 1.3.6.1.4.1.259.10.1.5.1.16.1.2.1.6 | EnabledStatus | RW | ||||||||||
column · EnabledStatus · read-write · current Whether input rate limit is enabled for this port. | |||||||||||||
| CrlPortOutputStatus | 1.3.6.1.4.1.259.10.1.5.1.16.1.2.1.7 | EnabledStatus | RW | ||||||||||
column · EnabledStatus · read-write · current Whether output rate limit is enabled for this port. | |||||||||||||
| NcosMgt | 1.3.6.1.4.1.259.10.1.5.1.16.3 | ||||||||||||
| TprioAclToCosMappingTable | 1.3.6.1.4.1.259.10.1.5.1.16.3.1 | NA | |||||||||||
table · not-accessible · current Table for ACL to CoS Mapping. | |||||||||||||
| RprioAclToCosMappingEntry | 1.3.6.1.4.1.259.10.1.5.1.16.3.1.1 | NA | |||||||||||
row · not-accessible · current Entry for ACL to CoS Mapping. | |||||||||||||
| CprioAclToCosMappingIfIndex | 1.3.6.1.4.1.259.10.1.5.1.16.3.1.1.1 | Integer32 | NA | ||||||||||
column · Integer32 · not-accessible · current The port interface of the prioAclToCosMappingEntry. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex in the IF-MIB. | |||||||||||||
| CprioAclToCosMappingAclName | 1.3.6.1.4.1.259.10.1.5.1.16.3.1.1.2 | DisplayString (SIZE (1..16)) | NA | ||||||||||
column · DisplayString (SIZE (1..16)) · not-accessible · current The name of an IP ACL. Within a feature a unique name is used to identify the list to which the entry belongs in the device. | |||||||||||||
| CprioAclToCosMappingCosValue | 1.3.6.1.4.1.259.10.1.5.1.16.3.1.1.3 | Integer32 (0..7) | RC | ||||||||||
column · Integer32 (0..7) · read-create · current CoS value of the prioAclToCosMappingTable. | |||||||||||||
| CprioAclToCosMappingStatus | 1.3.6.1.4.1.259.10.1.5.1.16.3.1.1.4 | RowStatus | RC | ||||||||||
column · RowStatus · read-create · current The status of this conceptual row entry. This object isused to manage the
creation and deletion of conceptual rows.
The status column has six defined values:
- 'active', which indicates that the conceptual row is
available for use by the managed device;
- 'notInService', which indicates that the conceptual
row exists in the agent, but is unavailable for use by
the managed device (see NOTE below);
- 'notReady', which indicates that the conceptual row
exists in the agent, but is missing information
necessary in order to be available for use by the
managed device;
- 'createAndGo', which is supplied by a management
station wishing to create a new instance of a
conceptual row and to have its status automatically set
to active, making it available for use by the managed
device;
- 'createAndWait', which is supplied by a management
station wishing to create a new instance of a
conceptual row (but not make it available for use by
the managed device); and,
- 'destroy', which is supplied by a management station
wishing to delete all of the instances associated with
an existing conceptual row.
Whereas five of the six values (all except 'notReady') may
be specified in a management protocol set operation, only
three values will be returned in response to a management
protocol retrieval operation: 'notReady', 'notInService' or
'active'. That is, when queried, an existing conceptual row
has only three states: it is either available for use by
the managed device (the status column has value 'active');
it is not available for use by the managed device, though
the agent has sufficient information to make it so (the
status column has value 'notInService'); or, it is not
available for use by the managed device, and an attempt to
make it so would fail because the agent has insufficient
information (the state column has value 'notReady').
For a detailed description of this object, please refer to
SNMPv2-TC MIB. | |||||||||||||
| TprioIfClassificationModeTable | 1.3.6.1.4.1.259.10.1.5.1.16.3.2 | NA | |||||||||||
table · not-accessible · current Table for setting the interface Qos mapping classification mode. | |||||||||||||
| RprioIfClassificationModeEntry | 1.3.6.1.4.1.259.10.1.5.1.16.3.2.1 | NA | |||||||||||
row · not-accessible · current Entry for setting the interface Qos mapping classification mode. | |||||||||||||
| CprioIfClassificationModeIf | 1.3.6.1.4.1.259.10.1.5.1.16.3.2.1.1 | Integer32 | NA | ||||||||||
column · Integer32 · not-accessible · current The port or trunk interface of the device. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex in the IF-MIB. | |||||||||||||
| CprioIfClassificationModeStatus | 1.3.6.1.4.1.259.10.1.5.1.16.3.2.1.2 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current The Qos mapping classification mode of the interface. cos mode means that the internal priority is mapped from priority field of packet's VLAN tag if a VLAN tag exists; IP precedence mode means that the internal priority is mapped from the IP precedence value of IP packets; DSCP mode means the internal priority is mapped from the dscp value of IP packets.
| |||||||||||||
| TprioCosToDscpTable | 1.3.6.1.4.1.259.10.1.5.1.16.3.3 | NA | |||||||||||
table · not-accessible · current Table for CoS/CFI to internal QoS label mapping. | |||||||||||||
| RprioCosToDscpEntry | 1.3.6.1.4.1.259.10.1.5.1.16.3.3.1 | NA | |||||||||||
row · not-accessible · current Entry for CoS/CFI to internal QoS label mapping. | |||||||||||||
| CprioCosToDscpIfValue | 1.3.6.1.4.1.259.10.1.5.1.16.3.3.1.1 | Integer32 | NA | ||||||||||
column · Integer32 · not-accessible · current The port or the trunk interface of the device. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex in the IF-MIB. | |||||||||||||
| CprioCosToDscpCosValue | 1.3.6.1.4.1.259.10.1.5.1.16.3.3.1.2 | Integer32 (0..7) | NA | ||||||||||
column · Integer32 (0..7) · not-accessible · current The CoS value (0~7) mapped to an internal QoS label value which is composed of PHB(3 bits) and drop precedence(2 bits). | |||||||||||||
| CprioCosToDscpCFIValue | 1.3.6.1.4.1.259.10.1.5.1.16.3.3.1.3 | Integer32 (0..1) | NA | ||||||||||
column · Integer32 (0..1) · not-accessible · current The CFI value (0 or 1) mapped to an internal QoS label value which is composed of PHB(3 bits) and drop precedence(2 bits). | |||||||||||||
| CprioCosToDscpDscpValue | 1.3.6.1.4.1.259.10.1.5.1.16.3.3.1.4 | Integer32 (0..63) | RW | ||||||||||
column · Integer32 (0..63) · read-write · current The DSCP value used to represent the internal QoS label (3 bits PHB+2 bits Drop precedence). The MSB 4 bits of DSCP is used to represent PHB value of QoS label; The LSB 2 bits of DSCP are used to represent the drop precedence value of QoS label. Green(0), Yellow(3), Red(1). In a word, PHB=(DSCP>>2), Drop precedence=(DSCP & 0x3). Note: The setting range of PHB value must be 0~7 and the setting drop precedence value must be one of the values (0,1,3). | |||||||||||||
| TprioPrecToDscpTable | 1.3.6.1.4.1.259.10.1.5.1.16.3.4 | NA | |||||||||||
table · not-accessible · current Table for IP precedence to internal QoS label mapping. This table setting will take effect only when the interface QoS mapping classification mode is set to IP precedence mode. | |||||||||||||
| RprioPrecToDscpEntry | 1.3.6.1.4.1.259.10.1.5.1.16.3.4.1 | NA | |||||||||||
row · not-accessible · current Entry for IP precedence to internal QoS label mapping. | |||||||||||||
| CprioPrecToDscpIfValue | 1.3.6.1.4.1.259.10.1.5.1.16.3.4.1.1 | Integer32 | NA | ||||||||||
column · Integer32 · not-accessible · current The port or trunk interface of the device. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex in the IF-MIB. | |||||||||||||
| CprioPrecToDscpPrecValue | 1.3.6.1.4.1.259.10.1.5.1.16.3.4.1.2 | Integer32 (0..7) | NA | ||||||||||
column · Integer32 (0..7) · not-accessible · current The IP precedence value mapped to internal QoS label value which is composed of PHB (3 bits) and drop precedence (2 bits). | |||||||||||||
| CprioPrecToDscpDscpValue | 1.3.6.1.4.1.259.10.1.5.1.16.3.4.1.3 | Integer32 (0..63) | RW | ||||||||||
column · Integer32 (0..63) · read-write · current The DSCP value used to represent internal QoS label (3 bits PHB + 2 bits Drop precedence). The MSB 4 bits of DSCP are used to represent PHB value of QoS label; The LSB 2 bits of DSCP are used to represent the drop precedence value of QoS label. Green(0),Yellow(3), Red(1). In a word, PHB=(DSCP>>2), Drop precedence=(DSCP & 0x3). Note: The setting range of PHB value must be 0~7 and the setting drop precedence value must be one of values(0,1,3). | |||||||||||||
| TprioDscpToDscpTable | 1.3.6.1.4.1.259.10.1.5.1.16.3.5 | NA | |||||||||||
table · not-accessible · current Table for DSCP to internal QoS label mapping. This table setting will take effect only when the interface Qos mapping classification mode is set to DSCP mode. | |||||||||||||
| RprioDscpToDscpEntry | 1.3.6.1.4.1.259.10.1.5.1.16.3.5.1 | NA | |||||||||||
row · not-accessible · current Entry for ingress DSCP to internal QoS label mapping. | |||||||||||||
| CprioDscpToDscpIfValue | 1.3.6.1.4.1.259.10.1.5.1.16.3.5.1.1 | Integer32 | NA | ||||||||||
column · Integer32 · not-accessible · current The port or trunk interface of the device. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex in the IF-MIB. | |||||||||||||
| CprioDscpToDscpIngressDscpValue | 1.3.6.1.4.1.259.10.1.5.1.16.3.5.1.2 | Integer32 (0..63) | NA | ||||||||||
column · Integer32 (0..63) · not-accessible · current The ingress DSCP value which will be mapped to internal QoS label value. | |||||||||||||
| CprioDscpToDscpDscpValue | 1.3.6.1.4.1.259.10.1.5.1.16.3.5.1.3 | Integer32 (0..63) | RW | ||||||||||
column · Integer32 (0..63) · read-write · current The DSCP value used to represent internal QoS label (3 bits PHB + 2 bits Drop precedence). The MSB 4 bits of DSCP are used to represent PHB value of Qos label. The LSB 2 bits of DSCP are used to represent the drop precedence value of QoS label. Green(0),Yellow(3), Red(1). In a word, PHB=(DSCP>>2), Drop precedence=(DSCP & 0x3). Note: The setting range of PHB value must be 0~7 and the setting drop precedence value must be one of values (0,1,3). | |||||||||||||
| TprioDstPortToDscpTable | 1.3.6.1.4.1.259.10.1.5.1.16.3.6 | NA | |||||||||||
table · not-accessible · current Table for TCP/UDP destination port number to internal Qos label mapping. This table setting will always take effect for TCP/UDP packets no matter of what interface QoS mapping classification mode is set. | |||||||||||||
| RprioDstPortToDscpEntry | 1.3.6.1.4.1.259.10.1.5.1.16.3.6.1 | NA | |||||||||||
row · not-accessible · current Entry for TCP/UDP destination port to internal QoS label mapping. | |||||||||||||
| CprioDstPortToDscpIfValue | 1.3.6.1.4.1.259.10.1.5.1.16.3.6.1.1 | Integer32 | NA | ||||||||||
column · Integer32 · not-accessible · current The port or the trunk interface of the device. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex in the IF-MIB. | |||||||||||||
| CprioDstPortToDscpProtocolValue | 1.3.6.1.4.1.259.10.1.5.1.16.3.6.1.2 | INTEGER | NA | ||||||||||
column · INTEGER · not-accessible · current The protocol value (TCP:6, UDP:17) which will be mapped to internal QoS label value.
| |||||||||||||
| CprioDstPortToDscpDstPortValue | 1.3.6.1.4.1.259.10.1.5.1.16.3.6.1.3 | Integer32 | NA | ||||||||||
column · Integer32 · not-accessible · current The destination port number value which will be mapped to internal QoS label value. | |||||||||||||
| CprioDstPortToDscpDscpValue | 1.3.6.1.4.1.259.10.1.5.1.16.3.6.1.4 | Integer32 (0..63) | RW | ||||||||||
column · Integer32 (0..63) · read-write · current The DSCP value used to represent internal QoS label (3 bits PHB + 2 bits Drop precedence). The MSB 4 bits of DSCP is used to represent PHB value of QoS label. The LSB 2 bits of DSCP is used to represent the drop precedence value of Qos label. Green(0),Yellow(3), Red(1). In a word, PHB=(DSCP>>2), Drop precedence=(DSCP & 0x3). Note: The setting range of PHB value must be 0~7 and the setting drop precedence value must be one of values (0,1,3). | |||||||||||||
| TprioDscpToCosTable | 1.3.6.1.4.1.259.10.1.5.1.16.3.7 | NA | |||||||||||
table · not-accessible · current Table for internal QoS label to CoS and CFI mapping. | |||||||||||||
| RprioDscpToCosEntry | 1.3.6.1.4.1.259.10.1.5.1.16.3.7.1 | NA | |||||||||||
row · not-accessible · current Entry for internal QoS label to CoS and CFI mapping. | |||||||||||||
| CprioDscpToCosIfValue | 1.3.6.1.4.1.259.10.1.5.1.16.3.7.1.1 | Integer32 | NA | ||||||||||
column · Integer32 · not-accessible · current The port or trunk interface of the device. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex in the IF-MIB. | |||||||||||||
| CprioDscpToCosPHBValue | 1.3.6.1.4.1.259.10.1.5.1.16.3.7.1.2 | Integer32 (0..7) | NA | ||||||||||
column · Integer32 (0..7) · not-accessible · current The PHB value of internal QoS label. | |||||||||||||
| CprioDscpToCosDropPrecedenceValue | 1.3.6.1.4.1.259.10.1.5.1.16.3.7.1.3 | INTEGER | NA | ||||||||||
column · INTEGER · not-accessible · current The drop precedence value of internal QoS label. Green(0), Yellow(3), Red(1).
| |||||||||||||
| CprioDscpToCosCFICosValue | 1.3.6.1.4.1.259.10.1.5.1.16.3.7.1.4 | Integer32 (0..16) | RW | ||||||||||
column · Integer32 (0..16) · read-write · current The remarked CFI and CoS value mapped from the internal Qos label value when the packet leaves the device. The egress remarked CFI value equals to (prioDscpToCosCFICosValue >>3) and the egress remarked CoS value equals to (prioDscpToCosCFICosValue & 0x7). | |||||||||||||
| TprioPrioToDropPrecTable | 1.3.6.1.4.1.259.10.1.5.1.16.3.8 | NA | |||||||||||
table · not-accessible · current Table for packet priority to drop precedence mapping. | |||||||||||||
| RprioPrioToDropPrecEntry | 1.3.6.1.4.1.259.10.1.5.1.16.3.8.1 | NA | |||||||||||
row · not-accessible · current Entry for packet priority to drop precedence mapping. | |||||||||||||
| CprioPrioToDropPrecIfValue | 1.3.6.1.4.1.259.10.1.5.1.16.3.8.1.1 | Integer32 | NA | ||||||||||
column · Integer32 · not-accessible · current The port or the trunk interface of the device. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex in the IF-MIB. | |||||||||||||
| CprioPrioToDropPrecPriorityValue | 1.3.6.1.4.1.259.10.1.5.1.16.3.8.1.2 | Integer32 (0..7) | NA | ||||||||||
column · Integer32 (0..7) · not-accessible · current The value of packet default priority. | |||||||||||||
| CprioPrioToDropPrecPrecValue | 1.3.6.1.4.1.259.10.1.5.1.16.3.8.1.3 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current The drop precedence value of internal QoS label. Green(0),Yellow(3), Red(1).
| |||||||||||||
| TprioDscpToQueueTable | 1.3.6.1.4.1.259.10.1.5.1.16.3.9 | NA | |||||||||||
table · not-accessible · current Table for PHB to queue mapping. | |||||||||||||
| RprioDscpToQueueEntry | 1.3.6.1.4.1.259.10.1.5.1.16.3.9.1 | NA | |||||||||||
row · not-accessible · current Entry for PHB to queue mapping. | |||||||||||||
| CprioDscpToQueueIfValue | 1.3.6.1.4.1.259.10.1.5.1.16.3.9.1.1 | Integer32 | NA | ||||||||||
column · Integer32 · not-accessible · current The port or trunk interface of the device. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex in the IF-MIB. | |||||||||||||
| CprioDscpToQueuePHBValue | 1.3.6.1.4.1.259.10.1.5.1.16.3.9.1.2 | Integer32 (0..7) | NA | ||||||||||
column · Integer32 (0..7) · not-accessible · current The PHB value of internal QoS label. | |||||||||||||
| CprioDscpToQueueQueueValue | 1.3.6.1.4.1.259.10.1.5.1.16.3.9.1.3 | Integer32 (0..7) | RW | ||||||||||
column · Integer32 (0..7) · read-write · current The queue value which is mapped from the PHB value of QoS label. | |||||||||||||
| NdiffServMgt | 1.3.6.1.4.1.259.10.1.5.1.16.4 | ||||||||||||
| TdiffServPortTable | 1.3.6.1.4.1.259.10.1.5.1.16.4.9 | NA | |||||||||||
table · not-accessible · current Table for differentiated services on each port. | |||||||||||||
| RdiffServPortEntry | 1.3.6.1.4.1.259.10.1.5.1.16.4.9.1 | NA | |||||||||||
row · not-accessible · current Entry for differentiated services on each port.
| |||||||||||||
| CdiffServPortIfIndex | 1.3.6.1.4.1.259.10.1.5.1.16.4.9.1.1 | Integer32 | NA | ||||||||||
column · Integer32 · not-accessible · current This object is the interface index of diffServPortEntry. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex in the IF-MIB. | |||||||||||||
| CdiffServPortPolicyMapIndex | 1.3.6.1.4.1.259.10.1.5.1.16.4.9.1.2 | Integer32 | RW | ||||||||||
column · Integer32 · read-write · current Specifies the policy map binding to the interface. The policy map identified by a particular value of this index is associated with the same DiffServPolicyMapEntry as identified by the same value of diffServPolicyMapIndex. | |||||||||||||
| TdiffServPolicyMapTable | 1.3.6.1.4.1.259.10.1.5.1.16.4.10 | NA | |||||||||||
table · not-accessible · current Table for policy map. | |||||||||||||
| RdiffServPolicyMapEntry | 1.3.6.1.4.1.259.10.1.5.1.16.4.10.1 | NA | |||||||||||
| CdiffServPolicyMapIndex | 1.3.6.1.4.1.259.10.1.5.1.16.4.10.1.1 | Integer32 | NA | ||||||||||
column · Integer32 · not-accessible · current An index that uniquely identifies an entry in this table. | |||||||||||||
| CdiffServPolicyMapName | 1.3.6.1.4.1.259.10.1.5.1.16.4.10.1.2 | DisplayString (SIZE (1..16)) | RC | ||||||||||
column · DisplayString (SIZE (1..16)) · read-create · current The name of this entry. | |||||||||||||
| CdiffServPolicyMapDescription | 1.3.6.1.4.1.259.10.1.5.1.16.4.10.1.3 | DisplayString (SIZE (0..64)) | RC | ||||||||||
column · DisplayString (SIZE (0..64)) · read-create · current The description of this entry. | |||||||||||||
| CdiffServPolicyMapElementIndexList | 1.3.6.1.4.1.259.10.1.5.1.16.4.10.1.4 | OCTET STRING (SIZE (0..32)) | RO | ||||||||||
column · OCTET STRING (SIZE (0..32)) · read-only · current The octet string containes the diffServPolicyMapElementEntry indexes. Two octets express one index and it is represented in network order. This index list indicates the diffServPolicyMapEntrys which belong to this entry. | |||||||||||||
| CdiffServPolicyMapStatus | 1.3.6.1.4.1.259.10.1.5.1.16.4.10.1.5 | RowStatus | RC | ||||||||||
column · RowStatus · read-create · current This object is used to create a new row, or modify or delete
an existing row, in this table. The status column has six
defined values:
The status column has six defined values:
- 'active', which indicates that the conceptual row is
available for use by the managed device;
- 'notInService', which indicates that the conceptual
row exists in the agent, but is unavailable for use by
the managed device (see NOTE below);
- 'notReady', which indicates that the conceptual row
exists in the agent, but is missing information
necessary in order to be available for use by the
managed device;
- 'createAndGo', which is supplied by a management
station wishing to create a new instance of a
conceptual row and to have its status automatically set
to active, making it available for use by the managed
device;
- 'createAndWait', which is supplied by a management
station wishing to create a new instance of a
conceptual row (but not make it available for use by
the managed device); and,
- 'destroy', which is supplied by a management station
wishing to delete all of the instances associated with
an existing conceptual row.
Whereas five of the six values (all except 'notReady') may
be specified in a management protocol set operation, only
three values will be returned in response to a management
protocol retrieval operation: 'notReady', 'notInService' or
'active'. That is, when queried, an existing conceptual row
has only three states: it is either available for use by
the managed device (the status column has the value
'active');it is not available for use by the managed device,
though the agent has sufficient information to make it so
(the status column has the value 'notInService'); or, it is
not available for use by the managed device, and an attempt
to make it so would fail because the agent has insufficient
information (the state column has the value 'notReady').
For a detailed description of this object, please refer to
SNMPv2-TC MIB. | |||||||||||||
| NdiffServPolicyMapAttachCtl | 1.3.6.1.4.1.259.10.1.5.1.16.4.11 | ||||||||||||
| SdiffServPolicyMapAttachCtlIndex | 1.3.6.1.4.1.259.10.1.5.1.16.4.11.1 | Integer32 | RW | ||||||||||
scalar · Integer32 · read-write · current Index for attachment control. Specifies the policy map as the target to relate with the policy map element. The policy map identified by a particular value of this index is associated with the same diffServPolicyMapEntry as identified by the same value of diffServPolicyMapIndex. | |||||||||||||
| SdiffServPolicyMapAttachCtlElementIndex | 1.3.6.1.4.1.259.10.1.5.1.16.4.11.2 | Integer32 | RW | ||||||||||
scalar · Integer32 · read-write · current Element Index for attachment control.Specifies the policy map element to relate with the policy map. The policy map element identified by a particular value of this index is associated with the same diffServPolicyMapElementEntry as identified by the same value of diffServPolicyMapElementIndex. | |||||||||||||
| SdiffServPolicyMapAttachCtlAction | 1.3.6.1.4.1.259.10.1.5.1.16.4.11.3 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Action for attachment control. When setting this object to attach(2) to begin the attaching operation, a particular policy map element is attached to a particular policy map. When setting this object to detach(3) to begin the not attached operation, a particular policy map element is not attached to a particular policy map. When the action is finshed or no action is taken, the value of this object is noAction(1). A particular policy map is specified in the diffServPolicyMapAttachCtlIndex. A particularpolicy map element is specified in the diffServPolicyMapAttachCtlElementIndex.
| |||||||||||||
| TdiffServPolicyMapElementTable | 1.3.6.1.4.1.259.10.1.5.1.16.4.12 | NA | |||||||||||
table · not-accessible · current Table for policy map element. | |||||||||||||
| RdiffServPolicyMapElementEntry | 1.3.6.1.4.1.259.10.1.5.1.16.4.12.1 | NA | |||||||||||
| CdiffServPolicyMapElementIndex | 1.3.6.1.4.1.259.10.1.5.1.16.4.12.1.1 | Integer32 | NA | ||||||||||
column · Integer32 · not-accessible · current An index that uniquely identifies an entry in this table. | |||||||||||||
| CdiffServPolicyMapElementClassMapIndex | 1.3.6.1.4.1.259.10.1.5.1.16.4.12.1.2 | Integer32 | RC | ||||||||||
column · Integer32 · read-create · current Specifies the class map binding to this entry. The class map identified by a particular value of this index is associated with the same diffServClassMapEntry as identified by the same value of diffServClassMapIndex. | |||||||||||||
| CdiffServPolicyMapElementMeterIndex | 1.3.6.1.4.1.259.10.1.5.1.16.4.12.1.3 | Integer32 | RC | ||||||||||
column · Integer32 · read-create · current Specifies the meter binding to this entry. The meter identified by a particular value of this index is associated with the same diffServMeterEntry as identified by the same value of diffServMeterIndex. If this value is zero, no associated meter will be associated, as zero is not a valid meter index. | |||||||||||||
| CdiffServPolicyMapElementActionIndex | 1.3.6.1.4.1.259.10.1.5.1.16.4.12.1.4 | Integer32 | RC | ||||||||||
column · Integer32 · read-create · current Specifies the action binding to this entry. The action identified by a particular value of this index is associated with the same diffServActionEntry as identified by the same value of diffServActionIndex. | |||||||||||||
| CdiffServPolicyMapElementStatus | 1.3.6.1.4.1.259.10.1.5.1.16.4.12.1.5 | RowStatus | RC | ||||||||||
column · RowStatus · read-create · current This object is used to create a new row, or modify or delete
an existing row, in this table. The status column has six
defined values:
The status column has six defined values:
- 'active', which indicates that the conceptual row is
available for use by the managed device;
- 'notInService', which indicates that the conceptual
row exists in the agent, but is unavailable for use by
the managed device (see NOTE below);
- 'notReady', which indicates that the conceptual row
exists in the agent, but is missing information
necessary in order to be available for use by the
managed device;
- 'createAndGo', which is supplied by a management
station wishing to create a new instance of a
conceptual row and to have its status automatically set
to active, making it available for use by the managed
device;
- 'createAndWait', which is supplied by a management
station wishing to create a new instance of a
conceptual row (but not make it available for use by
the managed device); and,
- 'destroy', which is supplied by a management station
wishing to delete all of the instances associated with
an existing conceptual row.
Whereas five of the six values (all except 'notReady') may
be specified in a management protocol set operation, only
three values will be returned in response to a management
protocol retrieval operation: 'notReady', 'notInService' or
'active'. That is, when queried, an existing conceptual row
has only three states: it is either available for use by
the managed device (the status column has the value
'active'); it is not available for use by the managed device,
though the agent has sufficient information to make it so
(the status column has the value 'notInService'); or, it is
not available for use by the managed device, and an attempt
to make it so would fail because the agent has insufficient
information (the state column has the value 'notReady').
For a detailed description of this object, please refer to
SNMPv2-TC MIB. | |||||||||||||
| TdiffServClassMapTable | 1.3.6.1.4.1.259.10.1.5.1.16.4.13 | NA | |||||||||||
table · not-accessible · current Table for class map. | |||||||||||||
| RdiffServClassMapEntry | 1.3.6.1.4.1.259.10.1.5.1.16.4.13.1 | NA | |||||||||||
| CdiffServClassMapIndex | 1.3.6.1.4.1.259.10.1.5.1.16.4.13.1.1 | Integer32 | NA | ||||||||||
column · Integer32 · not-accessible · current An index that uniquely identifies an entry in this table. | |||||||||||||
| CdiffServClassMapName | 1.3.6.1.4.1.259.10.1.5.1.16.4.13.1.2 | DisplayString (SIZE (1..16)) | RC | ||||||||||
column · DisplayString (SIZE (1..16)) · read-create · current The name of this entry. | |||||||||||||
| CdiffServClassMapDescription | 1.3.6.1.4.1.259.10.1.5.1.16.4.13.1.3 | DisplayString (SIZE (0..64)) | RC | ||||||||||
column · DisplayString (SIZE (0..64)) · read-create · current The description of this entry. | |||||||||||||
| CdiffServClassMapMatchType | 1.3.6.1.4.1.259.10.1.5.1.16.4.13.1.4 | INTEGER | RC | ||||||||||
column · INTEGER · read-create · current The map match type of this entry.
| |||||||||||||
| CdiffServClassMapElementIndexTypeList | 1.3.6.1.4.1.259.10.1.5.1.16.4.13.1.5 | OCTET STRING (SIZE (0..255)) | RO | ||||||||||
column · OCTET STRING (SIZE (0..255)) · read-only · current The octet string containes the type of class map element indexes. Two octets which are represented in network order express one type of the class map element index in network order and it maps the index of differServClasssMapElementIndexList in order. When the type is macAce(1), the maping index of differServClasssMapElementIndexList is the diffServMacAceEntry. When the type is ipAce(2), the maping index of differServClasssMapElementIndexList is the diffServIpAceEntry. When the type is acl(3), the maping index of differServClasssMapElementIndexList is the diffServAclEntry. | |||||||||||||
| CdiffServClassMapElementIndexList | 1.3.6.1.4.1.259.10.1.5.1.16.4.13.1.6 | OCTET STRING (SIZE (0..255)) | RO | ||||||||||
column · OCTET STRING (SIZE (0..255)) · read-only · current The octet string containes the class map element indexes. Two octets express one index and it is represented in network order. This index list indicates the particular class map elements which belong to this table. The class map element uses type to indicate diffServAclEntry, the diffServIpAceEntry or diffServMacAceEntry. The type is two octet specified in differServClasssMapElementIndexTypeList in order. When the type is macAce(1), the maping index of differServClasssMapElementIndexList is the diffServMacAceEntry. When the type is ipAce(2), the maping index of differServClasssMapElementIndexList is the diffServIpAceEntry. When the type is acl(3), the maping index of differServClasssMapElementIndexList is the diffServAclEntry. | |||||||||||||
| CdiffServClassMapStatus | 1.3.6.1.4.1.259.10.1.5.1.16.4.13.1.7 | RowStatus | RC | ||||||||||
column · RowStatus · read-create · current This object is used to create a new row or modify or delete
an existing row in this table.The status column has six
defined values:
The status column has six defined values:
- 'active', which indicates that the conceptual row is
available for use by the managed device;
- 'notInService', which indicates that the conceptual
row exists in the agent, but is unavailable for use by
the managed device (see NOTE below);
- 'notReady', which indicates that the conceptual row
exists in the agent, but is missing information
necessary in order to be available for use by the
managed device;
- 'createAndGo', which is supplied by a management
station wishing to create a new instance of a
conceptual row and to have its status automatically set
to active, making it available for use by the managed
device;
- 'createAndWait', which is supplied by a management
station wishing to create a new instance of a
conceptual row (but not make it available for use by
the managed device); and,
- 'destroy', which is supplied by a management station
wishing to delete all of the instances associated with
an existing conceptual row.
Whereas five of the six values (all except 'notReady') may
be specified in a management protocol set operation, only
three values will be returned in response to a management
protocol retrieval operation: 'notReady', 'notInService' or
'active'. That is, when queried, an existing conceptual row
has only three states: it is either available for use by
the managed device (the status column has the value
'active'); it is not available for use by the managed device,
though the agent has sufficient information to make it so
(the status column has the value 'notInService'); or, it is
not available for use by the managed device, and an attempt
to make it so would fail because the agent has insufficient
information (the state column has the value 'notReady').
For a detailed description of this object, please refer to
SNMPv2-TC MIB. | |||||||||||||
| NdiffServClassMapAttachCtl | 1.3.6.1.4.1.259.10.1.5.1.16.4.14 | ||||||||||||
| SdiffServClassMapAttachCtlIndex | 1.3.6.1.4.1.259.10.1.5.1.16.4.14.1 | Integer32 | RW | ||||||||||
scalar · Integer32 · read-write · current Index for attachment control. Specifies the class map as the target to relate with class map elements. The class map identified by a particular value of this index is associated with the same diffServClassMapEntry as identified by the same value of diffServClassMapIndex. | |||||||||||||
| SdiffServClassMapAttachCtlElementIndexType | 1.3.6.1.4.1.259.10.1.5.1.16.4.14.2 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Element Index for attachment control. Specifies the type of class map element to relate with the class map. When type is macAce(1), the index of diffServClassMapAttachCtlElementIndex is the index of diffServMacAceEntry. When the type is ipAce(2), the index of diffServClassMapAttachCtlElementIndex is the index of diffServIpAceEntry. When the type is acl(3), the index of diffServClassMapAttachCtlElementIndex is the index of diffServAclEntry.
| |||||||||||||
| SdiffServClassMapAttachCtlElementIndex | 1.3.6.1.4.1.259.10.1.5.1.16.4.14.3 | Integer32 | RW | ||||||||||
scalar · Integer32 · read-write · current Element Index for attachment control. Specifies the class map element related with the class map. The class map element uses type to indicate diffServAclEntry, the diffServIpAceEntry or diffServMacAceEntry. The type is specified in diffServClassMapAttachCtlElementIndexType. When the type is macAce(1), the maping index of differServClasssMapElementIndexList is the diffServMacAceEntry. When the type is ipAce(2), the maping index of differServClasssMapElementIndexList is the diffServIpAceEntry. When the type is acl(3), the maping index of differServClasssMapElementIndexList is the diffServAclEntry. | |||||||||||||
| SdiffServClassMapAttachCtlAction | 1.3.6.1.4.1.259.10.1.5.1.16.4.14.4 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Action for attachment control. When setting this object to attach(2) to begin the attaching operation, a particular class map element is attached to a particular class map. When setting this object to detach(3) to begin the not attached operation, then a particular class map element is not attached to a particular class map. When the action is finshed whether successfully or not, or no action is taken, the value of this object always is noAction(1). The value of a particular class map is specified in the AclAttachCtlTargetIndex. The class map element is specified by diffServClassMapAttachCtlElementIndexType and diffServClassMapAttachCtlElementIndex.
| |||||||||||||
| TdiffServActionTable | 1.3.6.1.4.1.259.10.1.5.1.16.4.19 | NA | |||||||||||
table · not-accessible · current Table for action. | |||||||||||||
| RdiffServActionEntry | 1.3.6.1.4.1.259.10.1.5.1.16.4.19.1 | NA | |||||||||||
| CdiffServActionIndex | 1.3.6.1.4.1.259.10.1.5.1.16.4.19.1.1 | Integer32 | NA | ||||||||||
column · Integer32 · not-accessible · current An index that uniquely identifies an entry in the action table. | |||||||||||||
| CdiffServActionList | 1.3.6.1.4.1.259.10.1.5.1.16.4.19.1.2 | Bits | RC | ||||||||||
column · Bits · read-create · current The bitmap value used to identify which action capabilities are enabled on the entry. The actionPktNewPri and actionPktNewDscp can not be enabled at the same time on the entry. The actionRedPktNewDscp and actionRedDrop can not be enabled at the same time on the entry.
| |||||||||||||
| CdiffServActionPktNewPri | 1.3.6.1.4.1.259.10.1.5.1.16.4.19.1.3 | Integer32 (0..8) | RC | ||||||||||
column · Integer32 (0..8) · read-create · current Specifies the new priority value for the packet when the action is satisfied. If the actionPktNewPri bit of the diffServActionList is not enabled, this object can not be set. | |||||||||||||
| CdiffServActionPktNewPhb | 1.3.6.1.4.1.259.10.1.5.1.16.4.19.1.4 | Integer32 (0..8) | RC | ||||||||||
column · Integer32 (0..8) · read-create · current Specifies the inner priority value for the packet when the action is satisfied. If the actionPktNewPhb bit of the diffServActionList is not enabled, this object can not be set. | |||||||||||||
| CdiffServActionGreenPktTransmit | 1.3.6.1.4.1.259.10.1.5.1.16.4.19.1.5 | EnabledStatus | RC | ||||||||||
column · EnabledStatus · read-create · current The actionGreenPktTransmit bit of the diffServActionList is for configuring this object. If the value of this object is enabled, the green marking packet will be Transmitted. | |||||||||||||
| CdiffServActionGreenPktNewDscp | 1.3.6.1.4.1.259.10.1.5.1.16.4.19.1.6 | Integer32 (0..64) | RC | ||||||||||
column · Integer32 (0..64) · read-create · current Specifies the new DSCP value for the packet when the action is satisfied. The value of this object is ignored whenever the value of diffServActionGreenPktNewDscp object is 64. If the actionGreenPktNewDscp bit of the diffServActionList is not enabled, this object can not be set. | |||||||||||||
| CdiffServActionYellowPktNewDscp | 1.3.6.1.4.1.259.10.1.5.1.16.4.19.1.7 | Integer32 (0..64) | RC | ||||||||||
column · Integer32 (0..64) · read-create · current Specifies the new DSCP value for the packet when the action is satisfied. The value of this object is ignored whenever the value of diffServActionYellowPktNewDscp object is 64. If the actionYellowPktNewDscp bit of the diffServActionList is not enabled, this object can not be set. | |||||||||||||
| CdiffServActionYellowPktDrop | 1.3.6.1.4.1.259.10.1.5.1.16.4.19.1.8 | EnabledStatus | RC | ||||||||||
column · EnabledStatus · read-create · current The actionYellowPktDrop bit of the diffServActionList is for configuring this object. If the value of this object is enabled, the red marking packet will be dropped. | |||||||||||||
| CdiffServActionRedPktNewDscp | 1.3.6.1.4.1.259.10.1.5.1.16.4.19.1.9 | Integer32 (0..64) | RC | ||||||||||
column · Integer32 (0..64) · read-create · current Specifies the new DSCP value for the red marking packet when the action is satisfied. The value of this object is ignored whenever the value of diffServActionRedPktNewDscp object is 64. If the actionRedPktNewDscp bit of the diffServActionList is not enabled, this object can not be set. | |||||||||||||
| CdiffServActionRedPktDrop | 1.3.6.1.4.1.259.10.1.5.1.16.4.19.1.10 | EnabledStatus | RC | ||||||||||
column · EnabledStatus · read-create · current The actionRedPktDrop bit of the diffServActionList is for configuring this object. If the value of this object is enabled, the red marking packet will be dropped. | |||||||||||||
| CdiffServActionStatus | 1.3.6.1.4.1.259.10.1.5.1.16.4.19.1.11 | RowStatus | RC | ||||||||||
column · RowStatus · read-create · current This object is used to create a new row, modify or
delete an existing row in this table.
The status column has six defined values:
The status column has six defined values:
- 'active', which indicates that the conceptual row
is available for use by the managed device;
- 'notInService', which indicates that the conceptual
row exists in the agent, but is unavailable for use
by the managed device (see NOTE below);
- 'notReady', which indicates that the conceptual row
exists in the agent, but is missing information
necessary in order to be available for use by the
managed device;
- 'createAndGo', which is supplied by a management
station wishing to create a new instance of a
conceptual row and to have its status automatically
set to active, making it available for use by the
managed device;
- 'createAndWait', which is supplied by a management
station wishing to create a new instance of a
conceptual row (but not make it available for use by
the managed device); and,
- 'destroy', which is supplied by a management
station wishing to delete all of the instances
associated with an existing conceptual row.
Whereas five of the six values (all except 'notReady') may
be specified in a management protocol set operation, only
three values will be returned in response to a management
protocol retrieval operation: 'notReady', 'notInService'
or 'active'. That is, when queried, an existing
conceptual row has only three states: it is either
available for use by the managed device (the status column
has the value 'active'); it is not available for use by
the managed device, though the agent has sufficient
information to make it so (the status column has the value
'notInService'); or, it is not available for use by the
managed device, and an attempt to make it so would fail
because the agent has insufficient information (the state
column has the value 'notReady').
For a detailed description of this object, please refer to
SNMPv2-TC MIB. | |||||||||||||
| CdiffServActionPktNewIpPrec | 1.3.6.1.4.1.259.10.1.5.1.16.4.19.1.12 | Integer32 (0..8) | RC | ||||||||||
column · Integer32 (0..8) · read-create · current Specifies the new precedence value for the packet when the action is satisfied. If the actionPktNewIpPrec bit of the diffServActionList is not enabled, this object can not be set. | |||||||||||||
| CdiffServActionPktNewDscp | 1.3.6.1.4.1.259.10.1.5.1.16.4.19.1.13 | Integer32 (0..63) | RC | ||||||||||
column · Integer32 (0..63) · read-create · current Specifies the new DSCP value for the packet when the action is satisfied. If the actionPktNewDscp bit of the diffServActionList is not enabled, this object can not be set. | |||||||||||||
| TdiffServMeterTable | 1.3.6.1.4.1.259.10.1.5.1.16.4.20 | NA | |||||||||||
table · not-accessible · current Table for meter. | |||||||||||||
| RdiffServMeterEntry | 1.3.6.1.4.1.259.10.1.5.1.16.4.20.1 | NA | |||||||||||
| CdiffServMeterIndex | 1.3.6.1.4.1.259.10.1.5.1.16.4.20.1.1 | Integer32 | NA | ||||||||||
column · Integer32 · not-accessible · current An entry that describes a single set of token bucket parameters. | |||||||||||||
| CdiffServMeterModel | 1.3.6.1.4.1.259.10.1.5.1.16.4.20.1.2 | INTEGER | RC | ||||||||||
column · INTEGER · read-create · current The Metering algorithm associated with the Token Bucket parameters. The zeroDotZero indicates this is unknown.
| |||||||||||||
| CdiffServMeterRate | 1.3.6.1.4.1.259.10.1.5.1.16.4.20.1.3 | Integer32 (0 | 64..1000000) | RC | ||||||||||
column · Integer32 (0 | 64..1000000) · read-create · current The token-bucket rate, in kilobits per second (kbps). | |||||||||||||
| CdiffServMeterBurstSize | 1.3.6.1.4.1.259.10.1.5.1.16.4.20.1.4 | Integer32 (0 | 4000..16000000) | RC | ||||||||||
column · Integer32 (0 | 4000..16000000) · read-create · current The maximum number of bytes in a single transmission burst. | |||||||||||||
| CdiffServMeterStatus | 1.3.6.1.4.1.259.10.1.5.1.16.4.20.1.6 | RowStatus | RC | ||||||||||
column · RowStatus · read-create · current This object is used to create a new row or modify or delete
an existing row in this table. The status column has six
defined values:
The status column has six defined values:
- 'active', which indicates that the conceptual row is
available for use by the managed device;
- 'notInService', which indicates that the conceptual
row exists in the agent, but is unavailable for use by
the managed device (see NOTE below);
- 'notReady', which indicates that the conceptual row
exists in the agent, but is missing information
necessary in order to be available for use by the
managed device;
- 'createAndGo', which is supplied by a management
station wishing to create a new instance of a
conceptual row and to have its status automatically set
to active, making it available for use by the managed
device;
- 'createAndWait', which is supplied by a management
station wishing to create a new instance of a
conceptual row (but not make it available for use by
the managed device); and,
- 'destroy', which is supplied by a management station
wishing to delete all of the instances associated with
an existing conceptual row.
Whereas five of the six values (all except 'notReady') may
be specified in a management protocol set operation, only
three values will be returned in response to a management
protocol retrieval operation: 'notReady', 'notInService' or
'active'. That is, when queried, an existing conceptual row
has only three states: it is either available for use by
the managed device (the status column has the value
'active'); it is not available for use by the managed device,
though the agent has sufficient information to make it so
(the status column has the value 'notInService'); or, it is
not available for use by the managed device, and an attempt
to make it so would fail because the agent has insufficient
information (the state column has the value 'notReady').
For a detailed description of this object, please refer to
SNMPv2-TC MIB. | |||||||||||||
| CdiffServMeterPeakRate | 1.3.6.1.4.1.259.10.1.5.1.16.4.20.1.7 | Integer32 (0 | 64..1000000) | RC | ||||||||||
column · Integer32 (0 | 64..1000000) · read-create · current The token-bucket rate, in kilobits per second (kbps). | |||||||||||||
| CdiffServMeterPeakBurstSize | 1.3.6.1.4.1.259.10.1.5.1.16.4.20.1.8 | Integer32 (0 | 4000..16000000) | RC | ||||||||||
column · Integer32 (0 | 4000..16000000) · read-create · current The maximum number of bytes in a double transmission burst. | |||||||||||||
| NsecurityMgt | 1.3.6.1.4.1.259.10.1.5.1.17 | ||||||||||||
| NprivateVlanMgt | 1.3.6.1.4.1.259.10.1.5.1.17.1 | ||||||||||||
| SprivateVlanStatus | 1.3.6.1.4.1.259.10.1.5.1.17.1.1 | EnabledStatus | RW | ||||||||||
scalar · EnabledStatus · read-write · current This controls whether private VLAN is enabled. | |||||||||||||
| SprivateVlanUplinkPorts | 1.3.6.1.4.1.259.10.1.5.1.17.1.2 | PortList | RW | ||||||||||
scalar · PortList · read-write · current This is the list of uplink ports for private VLAN. They should not overlap with privateVlanDownlinkPorts. Only one port can be set, no multiple ports. 0 will be displayed if the privateVlanStatus is disabled. You must enable the privateVlanStatus before setting this variable. | |||||||||||||
| SprivateVlanDownlinkPorts | 1.3.6.1.4.1.259.10.1.5.1.17.1.3 | PortList | RW | ||||||||||
scalar · PortList · read-write · current This is the list of downlink ports for private VLAN. They should not overlap with privateVlanUplinkPorts. Multiple port setting is permitted. 0 will be displayed if the privateVlanStatus is disabled. You must enable the privateVlanStatus before setting this variable. | |||||||||||||
| TprivateVlanVlanTable | 1.3.6.1.4.1.259.10.1.5.1.17.1.4 | NA | |||||||||||
table · not-accessible · current A table containing private VLAN information on the VLANs which currently exist. | |||||||||||||
| RprivateVlanVlanEntry | 1.3.6.1.4.1.259.10.1.5.1.17.1.4.1 | NA | |||||||||||
row · not-accessible · current A conceptual row containing the private VLAN information on the VLANs for a particular management domain.
| |||||||||||||
| CprivateVlanVlanIndex | 1.3.6.1.4.1.259.10.1.5.1.17.1.4.1.1 | Integer32 (1..4094) | NA | ||||||||||
column · Integer32 (1..4094) · not-accessible · current The VLAN ID of this private VLAN. | |||||||||||||
| CprivateVlanVlanType | 1.3.6.1.4.1.259.10.1.5.1.17.1.4.1.2 | INTEGER | RC | ||||||||||
column · INTEGER · read-create · current The VLAN type as defined for Private VLAN feature. Set the value to invalid(1) to destroy an entry. Set other values to create an entry. If an index already exists, set others to modifiy it. Note that a VLAN's private VLAN type cannot be changed once it has any port members.
| |||||||||||||
| CprivateVlanAssoicatedPrimaryVlan | 1.3.6.1.4.1.259.10.1.5.1.17.1.4.1.3 | Integer32 (0..4094) | RC | ||||||||||
column · Integer32 (0..4094) · read-create · current The VLAN ID of the associated primary VLAN used for the private VLAN feature if privateVlanVlanType has the value of isolated(3), community(4). If privateVlanVlanType has the value of primary(2), then this object has the value of 0. Note that one isolated VLAN can only be associated with one unique primary VLAN. One primary VLAN can only be associated with one isolated VLAN. One primary VLAN can be associated with multiple community VLANs; one community VLAN can only be associated with one unique primary VLAN. | |||||||||||||
| TprivateVlanPrivatePortTable | 1.3.6.1.4.1.259.10.1.5.1.17.1.5 | NA | |||||||||||
table · not-accessible · current A table containing information on the configuration of secondary VLANs on the device ports. | |||||||||||||
| RprivateVlanPrivatePortEntry | 1.3.6.1.4.1.259.10.1.5.1.17.1.5.1 | NA | |||||||||||
row · not-accessible · current A conceptual row containing information of the configuration of secondary VLANs for each port. An entry is created by the managed system for each interface which can be configured as a private port for Private VLAN feature. | |||||||||||||
| CprivateVlanPrivatePortIfIndex | 1.3.6.1.4.1.259.10.1.5.1.17.1.5.1.1 | Integer32 | NA | ||||||||||
column · Integer32 · not-accessible · current This is defined as the ifIndex. | |||||||||||||
| CprivateVlanPrivatePortSecondaryVlan | 1.3.6.1.4.1.259.10.1.5.1.17.1.5.1.2 | Integer32 (0..4094) | RW | ||||||||||
column · Integer32 (0..4094) · read-write · current The VLAN ID of the secondary VLAN configured on this private port. A private port is a port that allows ingress traffic of the secondary VLAN as well as egress traffic of its associated primary VLAN, but blocks the egress traffic of the isolated VLAN while allowing the egress traffic of the community or twoWayCommunity VLAN depending on the type of the secondary VLAN. Note that a port can join a secondary VLAN only after this secondary VLAN has been associated with a primary VLAN, i.e., the cpvlanVlanAssociatedPrimaryVlan has a non-zero value. The default value of 0 for this object means this port has not yet joined a secondary VLAN. | |||||||||||||
| TprivateVlanPromPortTable | 1.3.6.1.4.1.259.10.1.5.1.17.1.6 | NA | |||||||||||
table · not-accessible · current A table containing secondary VLAN to primary VLAN remapping information on ports of the device. | |||||||||||||
| RprivateVlanPromPortEntry | 1.3.6.1.4.1.259.10.1.5.1.17.1.6.1 | NA | |||||||||||
row · not-accessible · current A conceptual row containing secondary VLAN to primary VLAN remapping information for each port. An entry is created by the managed system for each interface which can be configured as a promiscuous port for the private VLAN feature. | |||||||||||||
| CprivateVlanPromPortIfIndex | 1.3.6.1.4.1.259.10.1.5.1.17.1.6.1.1 | Integer32 | NA | ||||||||||
column · Integer32 · not-accessible · current This is defined as ifIndex. | |||||||||||||
| CprivateVlanPromPortPrimaryVlanId | 1.3.6.1.4.1.259.10.1.5.1.17.1.6.1.2 | Integer32 (0..4094) | RW | ||||||||||
column · Integer32 (0..4094) · read-write · current The primary VLAN ID of the promiscous port. | |||||||||||||
| CprivateVlanPromPortSecondaryRemap | 1.3.6.1.4.1.259.10.1.5.1.17.1.6.1.3 | OCTET STRING (SIZE (0..128)) | RO | ||||||||||
column · OCTET STRING (SIZE (0..128)) · read-only · current A string of octets containing one bit per VLAN in the management domain on this port. The first octet corresponds to VLANs with VlanIndexOrZero values of 0 through 7; the second octet to VLANs 8 through 15; etc. The most significant bit of each octet corresponds to the lowest value VlanIndexOrZero in that octet. Note that if the length of this string is less than 128 octets, any 'missing' octets are assumed to contain the value zero. An NMS may omit any zero-valued octets from the end of this string in order to reduce SetPDU size, and the agent may also omit zero-valued trailing octets, to reduce the size of GetResponse PDUs. | |||||||||||||
| CprivateVlanPromPortSecondaryRemap2k | 1.3.6.1.4.1.259.10.1.5.1.17.1.6.1.4 | OCTET STRING (SIZE (0..128)) | RO | ||||||||||
column · OCTET STRING (SIZE (0..128)) · read-only · current A string of octets containing one bit per VLAN for VLANs with VlanIndexOrZero values of 1024 through 2047 in the management domain on this port. The first octet corresponds to VLANs with VlanIndexOrZero values of 1024 through 1031; the second octet to VLANs 1032 through 1039; etc. The most significant bit of each octet corresponds to the lowest value VlanIndexOrZero in that octet. Note that if the length of this string is less than 128 octets, any 'missing' octets are assumed to contain the value zero. An NMS may omit any zero-valued octets from the end of this string in order to reduce SetPDU size, and the agent may also omit zero-valued trailing octets, to reduce the size of GetResponse PDUs. This object is only instantiated on devices which support the range of VlanIndexOrZero up to 4095. | |||||||||||||
| CprivateVlanPromPortSecondaryRemap3k | 1.3.6.1.4.1.259.10.1.5.1.17.1.6.1.5 | OCTET STRING (SIZE (0..128)) | RO | ||||||||||
column · OCTET STRING (SIZE (0..128)) · read-only · current A string of octets containing one bit per VLAN for VLANs with VlanIndexOrZero values of 2048 through 3071 in the management domain on this port. The first octet corresponds to VLANs with VlanIndexOrZero values of 2048 through 2055; the second octet to VLANs 2056 through 2063; etc. The most significant bit of each octet corresponds to the lowest value VlanIndexOrZero in that octet. Note that if the length of this string is less than 128 octets, any 'missing' octets are assumed to contain the value zero. An NMS may omit any zero-valued octets from the end of this string in order to reduce SetPDU size, and the agent may also omit zero-valued trailing octets, to reduce the size of GetResponse PDUs. This object is only instantiated on devices which support the range of VlanIndexOrZero up to 4095. | |||||||||||||
| CprivateVlanPromPortSecondaryRemap4k | 1.3.6.1.4.1.259.10.1.5.1.17.1.6.1.6 | OCTET STRING (SIZE (0..128)) | RO | ||||||||||
column · OCTET STRING (SIZE (0..128)) · read-only · current A string of octets containing one bit per VLAN for VLANs with VlanIndexOrZero values of 3072 through 4095 in the management domain on this port. The first octet corresponds to VLANs with VlanIndexOrZero values of 3072 through 3079; the second octet to VLANs 3080 through 3087; etc. The most significant bit of each octet corresponds to the lowest value VlanIndexOrZero in that octet. Note that if the length of this string is less than 128 octets, any 'missing' octets are assumed to contain the value zero. An NMS may omit any zero-valued octets from the end of this string in order to reduce SetPDU size, and the agent may also omit zero-valued trailing octets, to reduce the size of GetResponse PDUs. This object is only instantiated on devices which support the range of VlanIndexOrZero up to 4095. | |||||||||||||
| TprivateVlanEdgePortTable | 1.3.6.1.4.1.259.10.1.5.1.17.1.10 | NA | |||||||||||
table · not-accessible · current Contains the settings for Private VLAN Edge. | |||||||||||||
| RprivateVlanEdgePortEntry | 1.3.6.1.4.1.259.10.1.5.1.17.1.10.1 | NA | |||||||||||
| CpvePortIfIndex | 1.3.6.1.4.1.259.10.1.5.1.17.1.10.1.1 | Integer32 | NA | ||||||||||
column · Integer32 · not-accessible · current The port interface of the portTable. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex in the IF-MIB. | |||||||||||||
| CpvePortStatus | 1.3.6.1.4.1.259.10.1.5.1.17.1.10.1.2 | EnabledStatus | RW | ||||||||||
column · EnabledStatus · read-write · current This controls whether Private VLAN Edge is enabled. | |||||||||||||
| NportSecurityMgt | 1.3.6.1.4.1.259.10.1.5.1.17.2 | ||||||||||||
| TportSecPortTable | 1.3.6.1.4.1.259.10.1.5.1.17.2.1 | NA | |||||||||||
table · not-accessible · current The port security(MAC binding) Table. | |||||||||||||
| RportSecPortEntry | 1.3.6.1.4.1.259.10.1.5.1.17.2.1.1 | NA | |||||||||||
| CportSecPortIndex | 1.3.6.1.4.1.259.10.1.5.1.17.2.1.1.1 | Integer32 | NA | ||||||||||
column · Integer32 · not-accessible · current The port and the trunk (excluding trunk members) interface of the portTable. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex in the IF-MIB. | |||||||||||||
| CportSecPortStatus | 1.3.6.1.4.1.259.10.1.5.1.17.2.1.1.2 | EnabledStatus | RW | ||||||||||
column · EnabledStatus · read-write · current Set enabled(1) to enable port security and set disabled(2) to disable port security. | |||||||||||||
| CportSecAction | 1.3.6.1.4.1.259.10.1.5.1.17.2.1.1.3 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current The corresponding actions that will take place when a port is under intrusion, when this variable is set to none(1), no action will be performed, when this variable is set to trap(2), a swPortSecurityTrap trap will be sent, when this variable is set to shutdown(3), the port will shutdown, when this variable is set to trapAndShutdown(4), a swPortSecurityTrap will be sent and the port will shutdown.
| |||||||||||||
| CportSecMaxMacCount | 1.3.6.1.4.1.259.10.1.5.1.17.2.1.1.4 | Integer32 (0..1024) | RW | ||||||||||
column · Integer32 (0..1024) · read-write · current The maximun number of MAC addresses that will be learned and locked. When we change the value of this variable, if the portSecPortStatus is enabled, we will discard all secure MAC and begin to learn again, until the number of MAC has reached this value, and only the secure MAC addresses can enter this port. If the portSecPortStatus is disabled, we will begin to learn the MAC, and auto enabled the portSecPortStatus when the MAC has reached this value. | |||||||||||||
| NradiusMgt | 1.3.6.1.4.1.259.10.1.5.1.17.4 | ||||||||||||
| SradiusServerGlobalAuthPort | 1.3.6.1.4.1.259.10.1.5.1.17.4.1 | Integer32 (1..65535) | RW | ||||||||||
scalar · Integer32 (1..65535) · read-write · current Aauthentication port number for RADIUS server. When specified radius server do not set aauthentication port number, this value is used. | |||||||||||||
| SradiusServerGlobalAcctPort | 1.3.6.1.4.1.259.10.1.5.1.17.4.2 | Integer32 (1..65535) | RW | ||||||||||
scalar · Integer32 (1..65535) · read-write · current Accounting port number of RADIUS server. When specified radius server do not set accounting port number, this value is used. | |||||||||||||
| SradiusServerGlobalKey | 1.3.6.1.4.1.259.10.1.5.1.17.4.3 | DisplayString (SIZE (0..48)) | RW | ||||||||||
scalar · DisplayString (SIZE (0..48)) · read-write · current Key for RADIUS. This variable can only be written. When this variable is read, it always returns a zero-length string. When specified radius server do not set key, this this value is used. | |||||||||||||
| SradiusServerGlobalRetransmit | 1.3.6.1.4.1.259.10.1.5.1.17.4.4 | INTEGER (1..30) | RW | ||||||||||
scalar · INTEGER (1..30) · read-write · current Maximum number of retransmissions for RADIUS. When specified radius server do not set maximum number of retransmissions, this value is used. | |||||||||||||
| SradiusServerGlobalTimeout | 1.3.6.1.4.1.259.10.1.5.1.17.4.5 | INTEGER (1..65535) | RW | ||||||||||
scalar · INTEGER (1..65535) · read-write · current Timeout for RADIUS. When specified radius server do not set timeout, this value is used. | |||||||||||||
| TradiusServerTable | 1.3.6.1.4.1.259.10.1.5.1.17.4.7 | NA | |||||||||||
table · not-accessible · current The table for RADIUS server. | |||||||||||||
| RradiusServerEntry | 1.3.6.1.4.1.259.10.1.5.1.17.4.7.1 | NA | |||||||||||
| CradiusServerIndex | 1.3.6.1.4.1.259.10.1.5.1.17.4.7.1.1 | Integer32 | NA | ||||||||||
column · Integer32 · not-accessible · current The RADIUS server index in the table. | |||||||||||||
| CradiusServerAddress | 1.3.6.1.4.1.259.10.1.5.1.17.4.7.1.2 | IpAddress | RC | ||||||||||
column · IpAddress · read-create · current IP address of a RADIUS server. | |||||||||||||
| CradiusServerAuthPortNumber | 1.3.6.1.4.1.259.10.1.5.1.17.4.7.1.3 | Integer32 (1..65535) | RC | ||||||||||
column · Integer32 (1..65535) · read-create · current Authentication port number of RADIUS server. | |||||||||||||
| CradiusServerAcctPortNumber | 1.3.6.1.4.1.259.10.1.5.1.17.4.7.1.4 | Integer32 (1..65535) | RC | ||||||||||
column · Integer32 (1..65535) · read-create · current Accounting port number of RADIUS server. | |||||||||||||
| CradiusServerKey | 1.3.6.1.4.1.259.10.1.5.1.17.4.7.1.5 | DisplayString (SIZE (0..48)) | RW | ||||||||||
column · DisplayString (SIZE (0..48)) · read-write · current Key for RADIUS. This variable can only be written. When this variable is read, it always returns a zero-length string. | |||||||||||||
| CradiusServerRetransmit | 1.3.6.1.4.1.259.10.1.5.1.17.4.7.1.6 | Integer32 (1..30) | RW | ||||||||||
column · Integer32 (1..30) · read-write · current Timeout for RADIUS. | |||||||||||||
| CradiusServerTimeout | 1.3.6.1.4.1.259.10.1.5.1.17.4.7.1.7 | Integer32 (1..65535) | RW | ||||||||||
column · Integer32 (1..65535) · read-write · current Timeout for RADIUS. | |||||||||||||
| CradiusServerStatus | 1.3.6.1.4.1.259.10.1.5.1.17.4.7.1.8 | ValidStatus | RC | ||||||||||
column · ValidStatus · read-create · current Setting this to valid(1) creates an entry. Setting this to invalid(2) destroys an entry. | |||||||||||||
| NtacacsMgt | 1.3.6.1.4.1.259.10.1.5.1.17.5 | ||||||||||||
| StacacsPlusServerGlobalPortNumber | 1.3.6.1.4.1.259.10.1.5.1.17.5.2 | Integer32 (1..65535) | RW | ||||||||||
scalar · Integer32 (1..65535) · read-write · current TCP port number of TACACS+ server. When specified TACACS+ server do not set TCP port number, this this value is used. | |||||||||||||
| StacacsPlusServerGlobalKey | 1.3.6.1.4.1.259.10.1.5.1.17.5.3 | DisplayString (SIZE (0..48)) | RW | ||||||||||
scalar · DisplayString (SIZE (0..48)) · read-write · current The encryption key used to encrpt the traffic between client and TACACS+ server. Do not use blank spaces in the string. This variable can only be set. When this variable is read, it always returns a zero-length string.When specified TACACS+ server do not set the encryption key , this this value is used. | |||||||||||||
| TtacacsPlusServerTable | 1.3.6.1.4.1.259.10.1.5.1.17.5.4 | NA | |||||||||||
table · not-accessible · current The table for TACACS+ server. | |||||||||||||
| RtacacsPlusServerEntry | 1.3.6.1.4.1.259.10.1.5.1.17.5.4.1 | NA | |||||||||||
row · not-accessible · current The conceptual row for tacacsPlusServerTable. | |||||||||||||
| CtacacsPlusServerIndex | 1.3.6.1.4.1.259.10.1.5.1.17.5.4.1.1 | Integer32 | NA | ||||||||||
column · Integer32 · not-accessible · current TACACS+ server index. | |||||||||||||
| CtacacsPlusServerAddress | 1.3.6.1.4.1.259.10.1.5.1.17.5.4.1.2 | IpAddress | RC | ||||||||||
column · IpAddress · read-create · current IP address of a TACACS+ server. | |||||||||||||
| CtacacsPlusServerPortNumber | 1.3.6.1.4.1.259.10.1.5.1.17.5.4.1.3 | Integer32 (1..65535) | RC | ||||||||||
column · Integer32 (1..65535) · read-create · current TCP port number of a TACACS+ server. | |||||||||||||
| CtacacsPlusServerKey | 1.3.6.1.4.1.259.10.1.5.1.17.5.4.1.4 | DisplayString (SIZE (0..48)) | RC | ||||||||||
column · DisplayString (SIZE (0..48)) · read-create · current The encryption key used to encrpt the traffic between client and TACACS+ server. Do not use blank spaces in the string. This variable can only be set. When this variable is read, it always returns a zero-length string. | |||||||||||||
| CtacacsPlusServerStatus | 1.3.6.1.4.1.259.10.1.5.1.17.5.4.1.8 | ValidStatus | RC | ||||||||||
column · ValidStatus · read-create · current Setting this to valid(1) creates an entry. Setting this to invalid(2) destroys an entry. | |||||||||||||
| NsshMgt | 1.3.6.1.4.1.259.10.1.5.1.17.6 | ||||||||||||
| SsshServerStatus | 1.3.6.1.4.1.259.10.1.5.1.17.6.1 | EnabledStatus | RW | ||||||||||
scalar · EnabledStatus · read-write · current The status of Secure Shell Server. Set this value to enabled(1) to enable SSH server, set this value to disabled(2) to disable the SSH server. | |||||||||||||
| SsshServerMajorVersion | 1.3.6.1.4.1.259.10.1.5.1.17.6.2 | Integer32 | RO | ||||||||||
scalar · Integer32 · read-only · current The major version of the SSH Server. | |||||||||||||
| SsshServerMinorVersion | 1.3.6.1.4.1.259.10.1.5.1.17.6.3 | Integer32 | RO | ||||||||||
scalar · Integer32 · read-only · current The minor version of the SSH Server. | |||||||||||||
| SsshTimeout | 1.3.6.1.4.1.259.10.1.5.1.17.6.4 | Integer32 (1..120) | RW | ||||||||||
scalar · Integer32 (1..120) · read-write · current The time interval that the router waits for the SSH client to respond. The range is 1-120.
| |||||||||||||
| SsshAuthRetries | 1.3.6.1.4.1.259.10.1.5.1.17.6.5 | Integer32 (1..5) | RW | ||||||||||
scalar · Integer32 (1..5) · read-write · current The number of attempts after which the interface is reset. The range is 1-5. | |||||||||||||
| TsshConnInfoTable | 1.3.6.1.4.1.259.10.1.5.1.17.6.6 | NA | |||||||||||
table · not-accessible · current The table for Secure Shell Connection. | |||||||||||||
| RsshConnInfoEntry | 1.3.6.1.4.1.259.10.1.5.1.17.6.6.1 | NA | |||||||||||
| CsshConnID | 1.3.6.1.4.1.259.10.1.5.1.17.6.6.1.1 | Integer32 | NA | ||||||||||
column · Integer32 · not-accessible · current The connection ID of the Secure Shell Connection. | |||||||||||||
| CsshConnMajorVersion | 1.3.6.1.4.1.259.10.1.5.1.17.6.6.1.2 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current The SSH major version. | |||||||||||||
| CsshConnMinorVersion | 1.3.6.1.4.1.259.10.1.5.1.17.6.6.1.3 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current The SSH minor version. | |||||||||||||
| CsshConnStatus | 1.3.6.1.4.1.259.10.1.5.1.17.6.6.1.5 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current The SSH connection State. negotiationStart(1) means the SSH is in its negotiation start state, authenticationStart(2) means the SSH is in authentication start state, sessionStart(3) means the SSH is in session start State.
| |||||||||||||
| CsshConnUserName | 1.3.6.1.4.1.259.10.1.5.1.17.6.6.1.6 | DisplayString (SIZE (1..8)) | RO | ||||||||||
column · DisplayString (SIZE (1..8)) · read-only · current The user name of the connection. | |||||||||||||
| CsshDisconnect | 1.3.6.1.4.1.259.10.1.5.1.17.6.6.1.7 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Set the variable to disconnect the connection, noDisconnect(1) will always be obtained when reading this variable.
| |||||||||||||
| CsshConnEncryptionTypeStr | 1.3.6.1.4.1.259.10.1.5.1.17.6.6.1.8 | DisplayString (SIZE (0..64)) | RO | ||||||||||
column · DisplayString (SIZE (0..64)) · read-only · current The encryption type of the SSH. | |||||||||||||
| SsshKeySize | 1.3.6.1.4.1.259.10.1.5.1.17.6.7 | Integer32 (512..896) | RW | ||||||||||
scalar · Integer32 (512..896) · read-write · current The SSH server key size. | |||||||||||||
| SsshRsaHostKey1 | 1.3.6.1.4.1.259.10.1.5.1.17.6.8 | KeySegment | RO | ||||||||||
scalar · KeySegment · read-only · current The RSA host key segment 1. | |||||||||||||
| SsshRsaHostKey2 | 1.3.6.1.4.1.259.10.1.5.1.17.6.9 | KeySegment | RO | ||||||||||
scalar · KeySegment · read-only · current The RSA host key segment 2. | |||||||||||||
| SsshRsaHostKey3 | 1.3.6.1.4.1.259.10.1.5.1.17.6.10 | KeySegment | RO | ||||||||||
scalar · KeySegment · read-only · current The RSA host key segment 3. | |||||||||||||
| SsshRsaHostKey4 | 1.3.6.1.4.1.259.10.1.5.1.17.6.11 | KeySegment | RO | ||||||||||
scalar · KeySegment · read-only · current The RSA host key segment 4. | |||||||||||||
| SsshRsaHostKey5 | 1.3.6.1.4.1.259.10.1.5.1.17.6.12 | KeySegment | RO | ||||||||||
scalar · KeySegment · read-only · current The RSA host key segment 5. | |||||||||||||
| SsshRsaHostKey6 | 1.3.6.1.4.1.259.10.1.5.1.17.6.13 | KeySegment | RO | ||||||||||
scalar · KeySegment · read-only · current The RSA host key segment 6. | |||||||||||||
| SsshRsaHostKey7 | 1.3.6.1.4.1.259.10.1.5.1.17.6.14 | KeySegment | RO | ||||||||||
scalar · KeySegment · read-only · current The RSA host key segment 7. | |||||||||||||
| SsshRsaHostKey8 | 1.3.6.1.4.1.259.10.1.5.1.17.6.15 | KeySegment | RO | ||||||||||
scalar · KeySegment · read-only · current The RSA host key segment 8. | |||||||||||||
| SsshDsaHostKey1 | 1.3.6.1.4.1.259.10.1.5.1.17.6.16 | KeySegment | RO | ||||||||||
scalar · KeySegment · read-only · current The DSA host key segment 1. | |||||||||||||
| SsshDsaHostKey2 | 1.3.6.1.4.1.259.10.1.5.1.17.6.17 | KeySegment | RO | ||||||||||
scalar · KeySegment · read-only · current The DSA host key segment 2. | |||||||||||||
| SsshDsaHostKey3 | 1.3.6.1.4.1.259.10.1.5.1.17.6.18 | KeySegment | RO | ||||||||||
scalar · KeySegment · read-only · current The DSA host key segment 3. | |||||||||||||
| SsshDsaHostKey4 | 1.3.6.1.4.1.259.10.1.5.1.17.6.19 | KeySegment | RO | ||||||||||
scalar · KeySegment · read-only · current The DSA host key segment 4. | |||||||||||||
| SsshDsaHostKey5 | 1.3.6.1.4.1.259.10.1.5.1.17.6.20 | KeySegment | RO | ||||||||||
scalar · KeySegment · read-only · current The DSA host key segment 5. | |||||||||||||
| SsshDsaHostKey6 | 1.3.6.1.4.1.259.10.1.5.1.17.6.21 | KeySegment | RO | ||||||||||
scalar · KeySegment · read-only · current The DSA host key segment 6. | |||||||||||||
| SsshDsaHostKey7 | 1.3.6.1.4.1.259.10.1.5.1.17.6.22 | KeySegment | RO | ||||||||||
scalar · KeySegment · read-only · current The DSA host key segment 7. | |||||||||||||
| SsshDsaHostKey8 | 1.3.6.1.4.1.259.10.1.5.1.17.6.23 | KeySegment | RO | ||||||||||
scalar · KeySegment · read-only · current The DSA host key segment 8. | |||||||||||||
| SsshHostKeyGenAction | 1.3.6.1.4.1.259.10.1.5.1.17.6.24 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current This variable is for host key generating. For the set behavior: Set it to genRsaKey(2) to generate the RSA host key, and to genDsaKey(3) to generate the DSA host key, if genBothKeys(4) is set, both RSA and DSA host key are generated. For the get behavior: You will get genRsaKey(2), genDsaKey(3) or genBothKeys(4) when the key gen action is in progress. otherwise, you will get noGen(1).
| |||||||||||||
| SsshHostKeyGenStatus | 1.3.6.1.4.1.259.10.1.5.1.17.6.25 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current The result of the last KeyGen status. if no key gen action has been performed. you will get unknown(1) status.
| |||||||||||||
| SsshHostKeySaveAction | 1.3.6.1.4.1.259.10.1.5.1.17.6.26 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current To save host key from memory to flash. For the set behavior: Set it to save(2) to perform the save operation. For the get behavior: You will get save(1) when the save action is in progress. Otherwise, you will get noSave(1).
| |||||||||||||
| SsshHostKeySaveStatus | 1.3.6.1.4.1.259.10.1.5.1.17.6.27 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current The result of the last savekey status. If no save action has been performed, you will get unknown(1) status.
| |||||||||||||
| SsshHostKeyDelAction | 1.3.6.1.4.1.259.10.1.5.1.17.6.28 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current To delete the host key. For the set behavior: Set it to delRsaKey(2) to delete the RSA host key, to delDsaKey(3) to delete the DSA host key, or to delBothKeys(4) to delete both RSA and DSA host key. For the get behavior: You will get delRsaKey(2), delDsaKey(3) or delBothKeys(4) when the delete operation is in progress. Otherwise, you will get noDel(1).
| |||||||||||||
| TsshUserTable | 1.3.6.1.4.1.259.10.1.5.1.17.6.29 | NA | |||||||||||
table · not-accessible · current The conceptual table of all of sshUserEntry. | |||||||||||||
| RsshUserEntry | 1.3.6.1.4.1.259.10.1.5.1.17.6.29.1 | NA | |||||||||||
| CsshUserName | 1.3.6.1.4.1.259.10.1.5.1.17.6.29.1.1 | DisplayString (SIZE (1..8)) | NA | ||||||||||
column · DisplayString (SIZE (1..8)) · not-accessible · current User Name. | |||||||||||||
| CsshUserRsaKey1 | 1.3.6.1.4.1.259.10.1.5.1.17.6.29.1.2 | KeySegment | RO | ||||||||||
column · KeySegment · read-only · current The RSA user key segment 1. | |||||||||||||
| CsshUserRsaKey2 | 1.3.6.1.4.1.259.10.1.5.1.17.6.29.1.3 | KeySegment | RO | ||||||||||
column · KeySegment · read-only · current The RSA user key segment 2. | |||||||||||||
| CsshUserRsaKey3 | 1.3.6.1.4.1.259.10.1.5.1.17.6.29.1.4 | KeySegment | RO | ||||||||||
column · KeySegment · read-only · current The RSA user key segment 3. | |||||||||||||
| CsshUserRsaKey4 | 1.3.6.1.4.1.259.10.1.5.1.17.6.29.1.5 | KeySegment | RO | ||||||||||
column · KeySegment · read-only · current The RSA user key segment 4. | |||||||||||||
| CsshUserRsaKey5 | 1.3.6.1.4.1.259.10.1.5.1.17.6.29.1.6 | KeySegment | RO | ||||||||||
column · KeySegment · read-only · current The RSA user key segment 5. | |||||||||||||
| CsshUserRsaKey6 | 1.3.6.1.4.1.259.10.1.5.1.17.6.29.1.7 | KeySegment | RO | ||||||||||
column · KeySegment · read-only · current The RSA user key segment 6. | |||||||||||||
| CsshUserRsaKey7 | 1.3.6.1.4.1.259.10.1.5.1.17.6.29.1.8 | KeySegment | RO | ||||||||||
column · KeySegment · read-only · current The RSA user key segment 7. | |||||||||||||
| CsshUserRsaKey8 | 1.3.6.1.4.1.259.10.1.5.1.17.6.29.1.9 | KeySegment | RO | ||||||||||
column · KeySegment · read-only · current The RSA user key segment 8. | |||||||||||||
| CsshUserDsaKey1 | 1.3.6.1.4.1.259.10.1.5.1.17.6.29.1.10 | KeySegment | RO | ||||||||||
column · KeySegment · read-only · current The DSA user key segment 1. | |||||||||||||
| CsshUserDsaKey2 | 1.3.6.1.4.1.259.10.1.5.1.17.6.29.1.11 | KeySegment | RO | ||||||||||
column · KeySegment · read-only · current The DSA user key segment 2. | |||||||||||||
| CsshUserDsaKey3 | 1.3.6.1.4.1.259.10.1.5.1.17.6.29.1.12 | KeySegment | RO | ||||||||||
column · KeySegment · read-only · current The DSA user key segment 3. | |||||||||||||
| CsshUserDsaKey4 | 1.3.6.1.4.1.259.10.1.5.1.17.6.29.1.13 | KeySegment | RO | ||||||||||
column · KeySegment · read-only · current The DSA user key segment 4. | |||||||||||||
| CsshUserDsaKey5 | 1.3.6.1.4.1.259.10.1.5.1.17.6.29.1.14 | KeySegment | RO | ||||||||||
column · KeySegment · read-only · current The DSA user key segment 5. | |||||||||||||
| CsshUserDsaKey6 | 1.3.6.1.4.1.259.10.1.5.1.17.6.29.1.15 | KeySegment | RO | ||||||||||
column · KeySegment · read-only · current The DSA user key segment 6. | |||||||||||||
| CsshUserDsaKey7 | 1.3.6.1.4.1.259.10.1.5.1.17.6.29.1.16 | KeySegment | RO | ||||||||||
column · KeySegment · read-only · current The DSA user key segment 7. | |||||||||||||
| CsshUserDsaKey8 | 1.3.6.1.4.1.259.10.1.5.1.17.6.29.1.17 | KeySegment | RO | ||||||||||
column · KeySegment · read-only · current The DSA user key segment 8. | |||||||||||||
| CsshUserKeyDelAction | 1.3.6.1.4.1.259.10.1.5.1.17.6.29.1.18 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current To delete the user key. For the set behavior: Set it to delRsaKey(2) to delete the RSA user key, to delDsaKey(3) to delete the DSA user key, or to delBothKeys(4) to delete both RSA and DSA user key. For the get behavior: You will get delRsaKey(2), delDsaKey(3) or delBothKeys(4) when the delete operation is in progress. Otherwise, you will get noDel(1).
| |||||||||||||
| NaclMgt | 1.3.6.1.4.1.259.10.1.5.1.17.7 | ||||||||||||
| TaclIpAceTable | 1.3.6.1.4.1.259.10.1.5.1.17.7.1 | NA | |||||||||||
table · not-accessible · current The conceptual table of all of aclIpAceEntry. | |||||||||||||
| RaclIpAceEntry | 1.3.6.1.4.1.259.10.1.5.1.17.7.1.1 | NA | |||||||||||
| CaclIpAceIndex | 1.3.6.1.4.1.259.10.1.5.1.17.7.1.1.1 | Integer32 | NA | ||||||||||
column · Integer32 · not-accessible · current An index that uniquely identifies an entry in the IP ACE table. | |||||||||||||
| CaclIpAceType | 1.3.6.1.4.1.259.10.1.5.1.17.7.1.1.2 | INTEGER | RC | ||||||||||
column · INTEGER · read-create · current The specified IP ACE type. When the type of this entry is modified, then this entry will be auto-unbound from the aclEntry and the not supporting field of this entry will be set 0.
| |||||||||||||
| CaclIpAceAccess | 1.3.6.1.4.1.259.10.1.5.1.17.7.1.1.3 | INTEGER | RC | ||||||||||
column · INTEGER · read-create · current Indicates the action to be taken if a packet matches this ACE. This object cannot not be configured when the status of the entry, aclIpAceStatus, is active(1).
| |||||||||||||
| CaclIpAceSourceIpAddr | 1.3.6.1.4.1.259.10.1.5.1.17.7.1.1.4 | IpAddress | RC | ||||||||||
column · IpAddress · read-create · current The specified source IP address. The packet's source address is AND-ed with the value of aclIpAceSourceIpAddrBitmask and then compared against the value of this object. This object cannot be configured when the status of the entry, aclIpAceStatus, is active(1). | |||||||||||||
| CaclIpAceSourceIpAddrBitmask | 1.3.6.1.4.1.259.10.1.5.1.17.7.1.1.5 | IpAddress | RC | ||||||||||
column · IpAddress · read-create · current The specified source IP address mask. The packet's source address is AND-ed with the value of IpAceSourceIpAddr and then compared against the value of this object. | |||||||||||||
| CaclIpAceDestIpAddr | 1.3.6.1.4.1.259.10.1.5.1.17.7.1.1.6 | IpAddress | RC | ||||||||||
column · IpAddress · read-create · current The specified destination IP address. The packet's destination address is AND-ed with the value of aclIpAceDestIpAddrBitmask and then compared against the value of this object. This object may not be modified if the associated aclIpAceType object is equal to standard(1). | |||||||||||||
| CaclIpAceDestIpAddrBitmask | 1.3.6.1.4.1.259.10.1.5.1.17.7.1.1.7 | IpAddress | RC | ||||||||||
column · IpAddress · read-create · current The specified destination IP address mask. This object may not be modified if the associated aclIpAceType object is equal to standard(1). | |||||||||||||
| CaclIpAceProtocol | 1.3.6.1.4.1.259.10.1.5.1.17.7.1.1.8 | Integer32 (0..256) | RC | ||||||||||
column · Integer32 (0..256) · read-create · current The protocol number field in the IP header used to indicate the higher layer protocol as specified in RFC 1700. A value of 0 matches every IP packet. The object=256 means 'any'. For example: 0 is IP, 1 is ICMP, 2 is IGMP, 4 is IP in IP encapsulation, 6 is TCP, 9 is IGRP, 17 is UDP, 47 is GRE, 50 is ESP, 51 is AH, 88 is IGRP, 89 is OSPF, 94 is KA9Q/NOS compatible IP over IP, 103 is PIMv2, 108 is PCP. This object may not be modified if the associated daclIpAceType object is equal to standard(1). | |||||||||||||
| CaclIpAcePrec | 1.3.6.1.4.1.259.10.1.5.1.17.7.1.1.9 | Integer32 (0..8) | RC | ||||||||||
column · Integer32 (0..8) · read-create · current Specifies the IP precedence value to match against. The value of this object is ignored whenever the value of aclIpAcePrec object is 8. This object may not be modified if the associated aclIpAceType object is equal to standard(1). | |||||||||||||
| CaclIpAceTos | 1.3.6.1.4.1.259.10.1.5.1.17.7.1.1.10 | Integer32 (0..16) | RC | ||||||||||
column · Integer32 (0..16) · read-create · current Specifies the IP ToS facility value to match against. The value of this object is ignored whenever the value of aclIpAcePrec object is 9. This object may not be modified if the associated aclIpAceType object is equal to standard(1). | |||||||||||||
| CaclIpAceDscp | 1.3.6.1.4.1.259.10.1.5.1.17.7.1.1.11 | Integer32 (0..64) | RC | ||||||||||
column · Integer32 (0..64) · read-create · current Specifies the DSCP value to match against. The value of this object is ignored whenever the value of aclIpAcePrec object is 64. This object may not be modified if the associated aclIpAceType object is equal to standard(1). | |||||||||||||
| CaclIpAceSourcePortOp | 1.3.6.1.4.1.259.10.1.5.1.17.7.1.1.12 | INTEGER | RC | ||||||||||
column · INTEGER · read-create · current Indicates how a packet's source TCP/UDP port number is to be compared. noOperator(1), which is the default value, means no comparison is to be made with the source TCP/UDP port number. equal(2), which is used the aclIpAceSourcePortBitmask and the aclIpAceMinSourcePort to match against. range(3),which is used the aclIpAceMinSourcePort and the aclIpAceMaxSourcePort to match against. This object may not be modified if the associated aclIpAceType object is equal to standard(1).
| |||||||||||||
| CaclIpAceMinSourcePort | 1.3.6.1.4.1.259.10.1.5.1.17.7.1.1.13 | Integer32 (0..65535) | RC | ||||||||||
column · Integer32 (0..65535) · read-create · current If the aclIpAceSourcePortOp is range(3), this indicates the lower bound of the TCP/UDP port number value range. This object may not be modified if the associated aclIpAceType object is equal to standard(1). | |||||||||||||
| CaclIpAceMaxSourcePort | 1.3.6.1.4.1.259.10.1.5.1.17.7.1.1.14 | Integer32 (0..65535) | RC | ||||||||||
column · Integer32 (0..65535) · read-create · current If the aclIpAceSourcePortOp is range(3), this indicates the upper bound of the TCP/UDP port number value range. | |||||||||||||
| CaclIpAceSourcePortBitmask | 1.3.6.1.4.1.259.10.1.5.1.17.7.1.1.15 | Integer32 (0..65535) | RC | ||||||||||
column · Integer32 (0..65535) · read-create · current If the aclIpAceSourcePortOp is equal(2), this indicates the bitmask of the aclIpAceMinSourcePort. This object may not be modified if the associated aclIpAceType object is equal to standard(1). | |||||||||||||
| CaclIpAceDestPortOp | 1.3.6.1.4.1.259.10.1.5.1.17.7.1.1.16 | INTEGER | RC | ||||||||||
column · INTEGER · read-create · current Indicates how a packet's destination TCP/UDP port number is to be compared. noOperator(1), which is the default value, means that no comparison is to be made with the destination TCP/UDP port number. equal(2), which is used the aclIpAceSourcePortBitmask and the aclIpAceMinDestPort to match against. range(3),which is used the aclIpAceMinDestPort and the aclIpAceMaxDestPort to match against. This object may not be modified if the associated aclIpAceType object is equal to standard(1).
| |||||||||||||
| CaclIpAceMinDestPort | 1.3.6.1.4.1.259.10.1.5.1.17.7.1.1.17 | Integer32 (0..65535) | RC | ||||||||||
column · Integer32 (0..65535) · read-create · current If the aclIpAceDestPortOp is range(3), this indicates the lower bound of the TCP/UDP port number value range. This object may not be modified if the associated aclIpAceType object is equal to standard(1). | |||||||||||||
| CaclIpAceMaxDestPort | 1.3.6.1.4.1.259.10.1.5.1.17.7.1.1.18 | Integer32 (0..65535) | RC | ||||||||||
column · Integer32 (0..65535) · read-create · current If the aclIpAceDestPortOp is range(3), this indicates the upper bound of the TCP/UDP port number value range. | |||||||||||||
| CaclIpAceDestPortBitmask | 1.3.6.1.4.1.259.10.1.5.1.17.7.1.1.19 | Integer32 (0..65535) | RC | ||||||||||
column · Integer32 (0..65535) · read-create · current If the aclIpAceDestPortOp is equal(2), this indicates the bitmask of the aclIpAceMinDestPort. This object may not be modified if the associated aclIpAceType object is equal to standard(1). | |||||||||||||
| CaclIpAceControlCode | 1.3.6.1.4.1.259.10.1.5.1.17.7.1.1.20 | Integer32 (0..63) | RC | ||||||||||
column · Integer32 (0..63) · read-create · current Indicates how the control flags of TCP packets are to be compared. aclIpAceControlCode is AND-ed with aclIpAceControlCodeBitmask. This object may not be modified if the associated aclIpAceType object is equal to standard(1). | |||||||||||||
| CaclIpAceControlCodeBitmask | 1.3.6.1.4.1.259.10.1.5.1.17.7.1.1.21 | Integer32 (0..63) | RC | ||||||||||
column · Integer32 (0..63) · read-create · current Indicates how the control flags of TCP packets are to be compared. It can be used to check multiple flags of the FIN, SYN, RST, PSH, ACK, URG by the sum of FIN=1, SYN=2, RST=4, PSH=8, ACK=16, URG=32. This object may not be modified if the associated aclIpAceType object is equal to standard(1). | |||||||||||||
| CaclIpAceStatus | 1.3.6.1.4.1.259.10.1.5.1.17.7.1.1.22 | RowStatus | RC | ||||||||||
column · RowStatus · read-create · current The status of this conceptual row entry. This object isused to manage the
creation and deletion of conceptual rows.
The status column has six defined values:
- 'active', which indicates that the conceptual row is
available for use by the managed device;
- 'notInService', which indicates that the conceptual
row exists in the agent, but is unavailable for use by
the managed device (see NOTE below);
- 'notReady', which indicates that the conceptual row
exists in the agent, but is missing information
necessary in order to be available for use by the
managed device;
- 'createAndGo', which is supplied by a management
station wishing to create a new instance of a
conceptual row and to have its status automatically set
to active, making it available for use by the managed
device;
- 'createAndWait', which is supplied by a management
station wishing to create a new instance of a
conceptual row (but not make it available for use by
the managed device); and,
- 'destroy', which is supplied by a management station
wishing to delete all of the instances associated with
an existing conceptual row.
Whereas five of the six values (all except 'notReady') may
be specified in a management protocol set operation, only
three values will be returned in response to a management
protocol retrieval operation: 'notReady', 'notInService' or
'active'. That is, when queried, an existing conceptual row
has only three states: it is either available for use by
the managed device (the status column has value 'active');
it is not available for use by the managed device, though
the agent has sufficient information to make it so (the
status column has value 'notInService'); or, it is not
available for use by the managed device, and an attempt to
make it so would fail because the agent has insufficient
information (the state column has value 'notReady').
For a detailed description of this object, please refer to
SNMPv2-TC MIB. | |||||||||||||
| TaclMacAceTable | 1.3.6.1.4.1.259.10.1.5.1.17.7.2 | NA | |||||||||||
table · not-accessible · current The conceptual table of all of aclMacAceEntry. | |||||||||||||
| RaclMacAceEntry | 1.3.6.1.4.1.259.10.1.5.1.17.7.2.1 | NA | |||||||||||
| CaclMacAceIndex | 1.3.6.1.4.1.259.10.1.5.1.17.7.2.1.1 | Integer32 | NA | ||||||||||
column · Integer32 · not-accessible · current An index that uniquely identifies an entry in the MAC ACE table. | |||||||||||||
| CaclMacAceAccess | 1.3.6.1.4.1.259.10.1.5.1.17.7.2.1.2 | INTEGER | RC | ||||||||||
column · INTEGER · read-create · current Indicates the action to be taken if a packet matches this ACE. This object cannot be configured when the status of the entry, aclMacAceStatus, is active(1).
| |||||||||||||
| CaclMacAcePktformat | 1.3.6.1.4.1.259.10.1.5.1.17.7.2.1.3 | INTEGER | RC | ||||||||||
column · INTEGER · read-create · current Used to check the packet format of the packets. This object cannot be configured when the status of the entry, aclMacAceStatus, is active(1).
| |||||||||||||
| CaclMacAceSourceMacAddr | 1.3.6.1.4.1.259.10.1.5.1.17.7.2.1.4 | MacAddress | RC | ||||||||||
column · MacAddress · read-create · current Indicates the 48-bit destination MAC address. The specified source MAC of the packet The packet's source MAC address is AND-ed with the value of aceMacSourceMacAddrBitmask and then compared against the value of this object. This object cannot be configured when the status of the entry, aclMacAceStatus, is active(1). | |||||||||||||
| CaclMacAceSourceMacAddrBitmask | 1.3.6.1.4.1.259.10.1.5.1.17.7.2.1.5 | MacAddress | RC | ||||||||||
column · MacAddress · read-create · current The specified source MAC address mask. This object cannot be configured when the status of the entry, aclMacAceStatus, is active(1). | |||||||||||||
| CaclMacAceDestMacAddr | 1.3.6.1.4.1.259.10.1.5.1.17.7.2.1.6 | MacAddress | RC | ||||||||||
column · MacAddress · read-create · current Indicates the 48-bit destination MAC address. The specified destination MAC of the packet. The packet's destination MAC address is AND-ed with the value of aceMacDestMacAddrBitmask and then compared against the value of this object. This object cannot be configured when the status of the entry, aclMacAceStatus, is active(1). | |||||||||||||
| CaclMacAceDestMacAddrBitmask | 1.3.6.1.4.1.259.10.1.5.1.17.7.2.1.7 | MacAddress | RC | ||||||||||
column · MacAddress · read-create · current The specified destination MAC address mask. This object cannot be configured when the status of the entry, aclMacAceStatus, is active(1). | |||||||||||||
| CaclMacAceVidOp | 1.3.6.1.4.1.259.10.1.5.1.17.7.2.1.8 | INTEGER | RC | ||||||||||
column · INTEGER · read-create · current Indicates how a packet's vid is to be compared. This object cannot be configured when the status of the entry, aclMacAceStatus, is active(1).
| |||||||||||||
| CaclMacAceMinVid | 1.3.6.1.4.1.259.10.1.5.1.17.7.2.1.9 | Integer32 (1..4094) | RC | ||||||||||
column · Integer32 (1..4094) · read-create · current Indicates the lower bound of the vid value range if the aclMacAceVidOp is range(3). This object cannot be configured when the status of the entry, aclMacAceStatus, is active(1). | |||||||||||||
| CaclMacAceVidBitmask | 1.3.6.1.4.1.259.10.1.5.1.17.7.2.1.10 | Integer32 (0..4095) | RC | ||||||||||
column · Integer32 (0..4095) · read-create · current The bitmask of vid if the aclMacAceVidOp is equal, default value is 0xfff. | |||||||||||||
| CaclMacAceMaxVid | 1.3.6.1.4.1.259.10.1.5.1.17.7.2.1.11 | Integer32 (1..4094) | RC | ||||||||||
column · Integer32 (1..4094) · read-create · current Indicates the upper bound of the vid value range if the aclMacAceVidOp is range(3). This object cannot be configured when the status of the entry, aclMacAceStatus, is active(1). | |||||||||||||
| CaclMacAceEtherTypeOp | 1.3.6.1.4.1.259.10.1.5.1.17.7.2.1.12 | INTEGER | RC | ||||||||||
column · INTEGER · read-create · current Indicates how a packet's ethertype is to be compared. This object cannot be configured when the status of the entry, aclMacAceStatus, is active(1).
| |||||||||||||
| CaclMacAceEtherTypeBitmask | 1.3.6.1.4.1.259.10.1.5.1.17.7.2.1.13 | Integer32 (0..65535) | RC | ||||||||||
column · Integer32 (0..65535) · read-create · current The bitmask of ether type if the aclMacAceVidOp is equal(2), default value is 0xFFFF. | |||||||||||||
| CaclMacAceMinEtherType | 1.3.6.1.4.1.259.10.1.5.1.17.7.2.1.14 | Integer32 (1536..65535) | RC | ||||||||||
column · Integer32 (1536..65535) · read-create · current Indicates the lower bound of the ether type value range if the aclMacAceEtherTypeOp is range(3). This object cannot be configured when the status of the entry, aclMacAceStatus, is active(1). | |||||||||||||
| CaclMacAceMaxEtherType | 1.3.6.1.4.1.259.10.1.5.1.17.7.2.1.15 | Integer32 (1536..65535) | RC | ||||||||||
column · Integer32 (1536..65535) · read-create · current Indicates the upper bound of the ether type value range if the aclMacAceEtherTypeOp is range(3). This object cannot be configured when the status of the entry, aclMacAceStatus, is active(1). | |||||||||||||
| CaclMacAceStatus | 1.3.6.1.4.1.259.10.1.5.1.17.7.2.1.16 | RowStatus | RC | ||||||||||
column · RowStatus · read-create · current The status of this conceptual row entry. This object isused to manage the
creation and deletion of conceptual rows.
The status column has six defined values:
- 'active', which indicates that the conceptual row is
available for use by the managed device;
- 'notInService', which indicates that the conceptual
row exists in the agent, but is unavailable for use by
the managed device (see NOTE below);
- 'notReady', which indicates that the conceptual row
exists in the agent, but is missing information
necessary in order to be available for use by the
managed device;
- 'createAndGo', which is supplied by a management
station wishing to create a new instance of a
conceptual row and to have its status automatically set
to active, making it available for use by the managed
device;
- 'createAndWait', which is supplied by a management
station wishing to create a new instance of a
conceptual row (but not make it available for use by
the managed device); and,
- 'destroy', which is supplied by a management station
wishing to delete all of the instances associated with
an existing conceptual row.
Whereas five of the six values (all except 'notReady') may
be specified in a management protocol set operation, only
three values will be returned in response to a management
protocol retrieval operation: 'notReady', 'notInService' or
'active'. That is, when queried, an existing conceptual row
has only three states: it is either available for use by
the managed device (the status column has value 'active');
it is not available for use by the managed device, though
the agent has sufficient information to make it so (the
status column has value 'notInService'); or, it is not
available for use by the managed device, and an attempt to
make it so would fail because the agent has insufficient
information (the state column has value 'notReady').
For a detailed description of this object, please refer to
SNMPv2-TC MIB. | |||||||||||||
| TaclAclGroupTable | 1.3.6.1.4.1.259.10.1.5.1.17.7.3 | NA | |||||||||||
table · not-accessible · current The conceptual table of aclAclGroupEntry. | |||||||||||||
| RaclAclGroupEntry | 1.3.6.1.4.1.259.10.1.5.1.17.7.3.1 | NA | |||||||||||
| CaclAclGroupIfIndex | 1.3.6.1.4.1.259.10.1.5.1.17.7.3.1.1 | Integer32 | NA | ||||||||||
column · Integer32 · not-accessible · current The interface number specifying the ACL binding to. | |||||||||||||
| CaclAclGroupIngressIpAcl | 1.3.6.1.4.1.259.10.1.5.1.17.7.3.1.2 | DisplayString (SIZE (0..16)) | RW | ||||||||||
column · DisplayString (SIZE (0..16)) · read-write · current Specifies the ingress IP ACL(standard or extended) binding to the interface. | |||||||||||||
| CaclAclGroupEgressIpAcl | 1.3.6.1.4.1.259.10.1.5.1.17.7.3.1.3 | DisplayString (SIZE (0..16)) | RW | ||||||||||
column · DisplayString (SIZE (0..16)) · read-write · current Specifies the egress IP ACL(standard or extended) binding to the interface. | |||||||||||||
| CaclAclGroupIngressMacAcl | 1.3.6.1.4.1.259.10.1.5.1.17.7.3.1.4 | DisplayString (SIZE (0..16)) | RW | ||||||||||
column · DisplayString (SIZE (0..16)) · read-write · current Specifies the ingress MAC ACL binding to the interface. | |||||||||||||
| CaclAclGroupEgressMacAcl | 1.3.6.1.4.1.259.10.1.5.1.17.7.3.1.5 | DisplayString (SIZE (0..16)) | RW | ||||||||||
column · DisplayString (SIZE (0..16)) · read-write · current Specifies the egress MAC ACL binding to the interface. | |||||||||||||
| TaclIpv6AceTable | 1.3.6.1.4.1.259.10.1.5.1.17.7.12 | NA | |||||||||||
table · not-accessible · current Table for IPv6 ACE. | |||||||||||||
| RaclIpv6AceEntry | 1.3.6.1.4.1.259.10.1.5.1.17.7.12.1 | NA | |||||||||||
| CaclIpv6AceIndex | 1.3.6.1.4.1.259.10.1.5.1.17.7.12.1.1 | Integer32 | NA | ||||||||||
column · Integer32 · not-accessible · current An index that uniquely identifies an entry in the IPv6 table. | |||||||||||||
| CaclIpv6AceType | 1.3.6.1.4.1.259.10.1.5.1.17.7.12.1.2 | INTEGER | RC | ||||||||||
column · INTEGER · read-create · current The specified IP v6 ACE type. When the type of this entry is modified, then this entry will be auto-unbound from the aclEntry and the not supporting field of this entry will be set 0.
| |||||||||||||
| CaclIpv6AceAccess | 1.3.6.1.4.1.259.10.1.5.1.17.7.12.1.3 | INTEGER | RC | ||||||||||
column · INTEGER · read-create · current Indicates the action to be taken if a packet matches this ACE.
| |||||||||||||
| CaclIpv6AceSourceIpAddr | 1.3.6.1.4.1.259.10.1.5.1.17.7.12.1.4 | OCTET STRING (SIZE (0..16)) | RC | ||||||||||
column · OCTET STRING (SIZE (0..16)) · read-create · current Specifies the source IPv6 address. | |||||||||||||
| CaclIpv6AceSourceIpAddrPrefixLen | 1.3.6.1.4.1.259.10.1.5.1.17.7.12.1.5 | Integer32 (0..128) | RC | ||||||||||
column · Integer32 (0..128) · read-create · current The length (in bits) associated with the source IPv6 address prefix of this entry. | |||||||||||||
| CaclIpv6AceDestIpAddr | 1.3.6.1.4.1.259.10.1.5.1.17.7.12.1.6 | OCTET STRING (SIZE (0..16)) | RC | ||||||||||
column · OCTET STRING (SIZE (0..16)) · read-create · current Specifies the destination IPv6 address. This object may not be modified if the associated aclIpv6AceType object is equal to standard(1). | |||||||||||||
| CaclIpv6AceDestIpAddrPrefixLen | 1.3.6.1.4.1.259.10.1.5.1.17.7.12.1.7 | Integer32 (0..8) | RC | ||||||||||
column · Integer32 (0..8) · read-create · current The length (in bits) associated with the destination IPv6 address prefix of this entry. This object may not be modified if the associated aclIpv6AceType object is equal to standard(1). | |||||||||||||
| CaclIpv6AceDscp | 1.3.6.1.4.1.259.10.1.5.1.17.7.12.1.9 | Integer32 (0..64) | RC | ||||||||||
column · Integer32 (0..64) · read-create · current Specifies the DSCP value to match against. This object may not be modified if the associated aclIpv6AceType object is equal to standard(1). | |||||||||||||
| CaclIpv6AceStatus | 1.3.6.1.4.1.259.10.1.5.1.17.7.12.1.11 | RowStatus | RC | ||||||||||
column · RowStatus · read-create · current This object is used to create a new row or modify or delete
an existing row in this table. The status column has six
defined values:
The status column has six defined values:
- 'active', which indicates that the conceptual row is
available for use by the managed device;
- 'notInService', which indicates that the conceptual
row exists in the agent, but is unavailable for use by
the managed device (see NOTE below);
- 'notReady', which indicates that the conceptual row
exists in the agent, but is missing information
necessary in order to be available for use by the
managed device;
- 'createAndGo', which is supplied by a management
station wishing to create a new instance of a
conceptual row and to have its status automatically set
to active, making it available for use by the managed
device;
- 'createAndWait', which is supplied by a management
station wishing to create a new instance of a
conceptual row (but not make it available for use by
the managed device); and,
- 'destroy', which is supplied by a management station
wishing to delete all of the instances associated with
an existing conceptual row.
Whereas five of the six values (all except 'notReady') may
be specified in a management protocol set operation, only
three values will be returned in response to a management
protocol retrieval operation: 'notReady', 'notInService' or
'active'. That is, when queried, an existing conceptual row
has only three states: it is either available for use by
the managed device (the status column has the value
'active'); it is not available for use by the managed device,
though the agent has sufficient information to make it so
(the status column has the value 'notInService'); or, it is
not available for use by the managed device, and an attempt
to make it so would fail because the agent has insufficient
information (the state column has the value 'notReady').
For a detailed description of this object, please refer to
SNMPv2-TC MIB. | |||||||||||||
| NaclAttachCtlMgt | 1.3.6.1.4.1.259.10.1.5.1.17.7.13 | ||||||||||||
| SaclAttachCtlIndex | 1.3.6.1.4.1.259.10.1.5.1.17.7.13.1 | Integer32 | RW | ||||||||||
scalar · Integer32 · read-write · current Index for attachment control. Specifies the ACL as the target to relate with the IP ACE, the MAC ACE or IPv6 ACE. The ACL identified by a particular value of this index is associated with the same aclEntry as identified by the same value of aclIndex. | |||||||||||||
| SaclAttachCtlAceType | 1.3.6.1.4.1.259.10.1.5.1.17.7.13.2 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Type for attachment control. Specifies the type of aclAttachCtlAceIndex to relate with the aclAttachCtlIndex. When the type is macAce(1), the index of aclAceIndexList is the aclMacAceEntry. When the type is ipAce(2), the index of aclAceIndexList is the aclIpAceEntry. When the type is ipv6Ace(3), the index of aclAceIndexList is the aclIpv6AceEntry.
| |||||||||||||
| SaclAttachCtlAceIndex | 1.3.6.1.4.1.259.10.1.5.1.17.7.13.3 | Integer32 | RW | ||||||||||
scalar · Integer32 · read-write · current Index for attachment control. Specifies the ACE to relate with the aclAttachCtlIndex. When aclAttachCtlAceType is macAce(1), the value of aclAttachCtlIndex is the diffServMacAceEntry. When aclAttachCtlAceType is ipAce(2), the value of aclAttachCtlIndex is the diffServIpAceEntry. When aclAttachCtlAceType is ipv6Ace(3), the value of aclAttachCtlIndex is the diffServIpv6AceEntry. | |||||||||||||
| SaclAttachCtlAction | 1.3.6.1.4.1.259.10.1.5.1.17.7.13.4 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Action for attachment control. When setting this object to attach(2) to begin the attaching operation, a particular ACE is attached to a particular ACL. When setting this object to detach(3) to begin the not attached operation, then a particular ACE is not attached to a particular ACL. When the action is finshed whether successfully or not, or no action is taken, the value of this object always is noAction(1), The value of a particular ACL is specified in the aclAttachCtlAceType and aclAttachCtlAceIndex.
| |||||||||||||
| TaclTable | 1.3.6.1.4.1.259.10.1.5.1.17.7.14 | NA | |||||||||||
table · not-accessible · current Table for ACL. | |||||||||||||
| RaclEntry | 1.3.6.1.4.1.259.10.1.5.1.17.7.14.1 | NA | |||||||||||
| CaclIndex | 1.3.6.1.4.1.259.10.1.5.1.17.7.14.1.1 | Integer32 | NA | ||||||||||
column · Integer32 · not-accessible · current An index that uniquely identifies an entry in the ACL table. | |||||||||||||
| CaclName | 1.3.6.1.4.1.259.10.1.5.1.17.7.14.1.2 | DisplayString (SIZE (1..16)) | RC | ||||||||||
column · DisplayString (SIZE (1..16)) · read-create · current The name of this entry. | |||||||||||||
| CaclType | 1.3.6.1.4.1.259.10.1.5.1.17.7.14.1.3 | INTEGER | RC | ||||||||||
column · INTEGER · read-create · current The type of this entry. When the value of ACL type is modified, then the ACEs in the aclAceIndexList of this entry will be auto-removed, and this entry will be aoto- unbound from the PortTable and the diffServClassMapTable.
| |||||||||||||
| CaclAceIndexList | 1.3.6.1.4.1.259.10.1.5.1.17.7.14.1.4 | OCTET STRING (SIZE (0..255)) | RO | ||||||||||
column · OCTET STRING (SIZE (0..255)) · read-only · current The octet string containes the ACE indexes. Two octets express one index and it is represented in network order. This index list indicates the particular ACEs which belong to this table. The ACE uses type to indicate the aclIpAceEntry, the aclMacAceEntry or the aclIpv6AceEntry. The type is specified in aclType. When the type is macAce(1), the index of aclAceIndexList is the aclMacAceEntry. When the type is ipAce(2), the index of aclAceIndexList is the aclIpAceEntry. When the type is ipv6Ace(3), the index of aclAceIndexListis the aclIpv6AceEntry. | |||||||||||||
| CaclStatus | 1.3.6.1.4.1.259.10.1.5.1.17.7.14.1.5 | RowStatus | RC | ||||||||||
column · RowStatus · read-create · current This object is used to create a new row or modify or delete
an existing row in this table. The status column has six
defined values:
- 'active', which indicates that the conceptual row is
available for use by the managed device;
- 'notInService', which indicates that the conceptual
row exists in the agent, but is unavailable for use by
the managed device (see NOTE below);
- 'notReady', which indicates that the conceptual row
exists in the agent, but is missing information
necessary in order to be available for use by the
managed device;
- 'createAndGo', which is supplied by a management
station wishing to create a new instance of a
conceptual row and to have its status automatically set
to active, making it available for use by the managed
device;
- 'createAndWait', which is supplied by a management
station wishing to create a new instance of a
conceptual row (but not make it available for use by
the managed device); and,
- 'destroy', which is supplied by a management station
wishing to delete all of the instances associated with
an existing conceptual row.
Whereas five of the six values (all except 'notReady') may
be specified in a management protocol set operation, only
three values will be returned in response to a management
protocol retrieval operation: 'notReady', 'notInService' or
'active'. That is, when queried, an existing conceptual row
has only three states: it is either available for use by
the managed device (the status column has the value
'active'); it is not available for use by the managed device,
though the agent has sufficient information to make it so
(the status column has the value 'notInService'); or, it is
not available for use by the managed device, and an attempt
to make it so would fail because the agent has insufficient
information (the state column has the value 'notReady').
For a detailed description of this object, please refer to
SNMPv2-TC MIB. | |||||||||||||
| NipFilterMgt | 1.3.6.1.4.1.259.10.1.5.1.17.9 | ||||||||||||
| TipFilterSnmpInetTable | 1.3.6.1.4.1.259.10.1.5.1.17.9.12 | NA | |||||||||||
table · not-accessible · current A list of IP address entries. | |||||||||||||
| RipFilterSnmpInetEntry | 1.3.6.1.4.1.259.10.1.5.1.17.9.12.1 | NA | |||||||||||
row · not-accessible · current This entry includes an IP address range which the system will allow to connect to this device through SNMP. | |||||||||||||
| CipFilterSnmpInetAddressType | 1.3.6.1.4.1.259.10.1.5.1.17.9.12.1.1 | InetAddressType | NA | ||||||||||
column · InetAddressType · not-accessible · current The type of IP address filter. Only supports IPv4 and IPv6 address types. | |||||||||||||
| CipFilterSnmpInetAddressStart | 1.3.6.1.4.1.259.10.1.5.1.17.9.12.1.2 | InetAddress | NA | ||||||||||
column · InetAddress · not-accessible · current The start IP address. | |||||||||||||
| CipFilterSnmpInetAddressEnd | 1.3.6.1.4.1.259.10.1.5.1.17.9.12.1.3 | InetAddress | RC | ||||||||||
column · InetAddress · read-create · current The end IP address. | |||||||||||||
| CipFilterSnmpInetStatus | 1.3.6.1.4.1.259.10.1.5.1.17.9.12.1.4 | ValidStatus | RC | ||||||||||
column · ValidStatus · read-create · current Setting this to valid(1) creates an entry. Setting this to invalid(2) destroys an entry. | |||||||||||||
| TipFilterHttpInetTable | 1.3.6.1.4.1.259.10.1.5.1.17.9.13 | NA | |||||||||||
table · not-accessible · current A list of IP address entries. | |||||||||||||
| RipFilterHttpInetEntry | 1.3.6.1.4.1.259.10.1.5.1.17.9.13.1 | NA | |||||||||||
row · not-accessible · current This entry includes an IP address range which the system will allow to connect to this device through SNMP. | |||||||||||||
| CipFilterHttpInetAddressType | 1.3.6.1.4.1.259.10.1.5.1.17.9.13.1.1 | InetAddressType | NA | ||||||||||
column · InetAddressType · not-accessible · current The type of IP address filter . Only supports IPv4 and IPv6 address types. | |||||||||||||
| CipFilterHttpInetAddressStart | 1.3.6.1.4.1.259.10.1.5.1.17.9.13.1.2 | InetAddress | NA | ||||||||||
column · InetAddress · not-accessible · current The start IP address. | |||||||||||||
| CipFilterHttpInetAddressEnd | 1.3.6.1.4.1.259.10.1.5.1.17.9.13.1.3 | InetAddress | RC | ||||||||||
column · InetAddress · read-create · current The end IP address. | |||||||||||||
| CipFilterHttpInetStatus | 1.3.6.1.4.1.259.10.1.5.1.17.9.13.1.4 | ValidStatus | RC | ||||||||||
column · ValidStatus · read-create · current Setting this to valid(1) creates an entry. Setting this to invalid(2) destroys an entry. | |||||||||||||
| TipFilterTelnetInetTable | 1.3.6.1.4.1.259.10.1.5.1.17.9.14 | NA | |||||||||||
table · not-accessible · current A list of IP address entries. | |||||||||||||
| RipFilterTelnetInetEntry | 1.3.6.1.4.1.259.10.1.5.1.17.9.14.1 | NA | |||||||||||
row · not-accessible · current This entry includes an IP address range which the system will allow them to connect to this device through SNMP. | |||||||||||||
| CipFilterTelnetInetAddressType | 1.3.6.1.4.1.259.10.1.5.1.17.9.14.1.1 | InetAddressType | NA | ||||||||||
column · InetAddressType · not-accessible · current The type of IP address filter . Only supports IPv4 and IPv6 address types. | |||||||||||||
| CipFilterTelnetInetAddressStart | 1.3.6.1.4.1.259.10.1.5.1.17.9.14.1.2 | InetAddress | NA | ||||||||||
column · InetAddress · not-accessible · current The start IP address. | |||||||||||||
| CipFilterTelnetInetAddressEnd | 1.3.6.1.4.1.259.10.1.5.1.17.9.14.1.3 | InetAddress | RC | ||||||||||
column · InetAddress · read-create · current The end IP address. | |||||||||||||
| CipFilterTelnetInetStatus | 1.3.6.1.4.1.259.10.1.5.1.17.9.14.1.4 | ValidStatus | RC | ||||||||||
column · ValidStatus · read-create · current Setting this to valid(1) creates an entry. Setting this to invalid(2) destroys an entry. | |||||||||||||
| NipFilterAllClientCtl | 1.3.6.1.4.1.259.10.1.5.1.17.9.15 | ||||||||||||
| SipFilterAllClientCtlInetAddressType | 1.3.6.1.4.1.259.10.1.5.1.17.9.15.1 | InetAddressType | RW | ||||||||||
scalar · InetAddressType · read-write · current The type of IP address filter. Only supports IPv4 and IPv6 address types. | |||||||||||||
| SipFilterAllClientCtlInetAddressStart | 1.3.6.1.4.1.259.10.1.5.1.17.9.15.2 | InetAddress | RW | ||||||||||
scalar · InetAddress · read-write · current The start IP address. | |||||||||||||
| SipFilterAllClientCtlInetAddressEnd | 1.3.6.1.4.1.259.10.1.5.1.17.9.15.3 | InetAddress | RW | ||||||||||
scalar · InetAddress · read-write · current The end IP address. | |||||||||||||
| SipFilterAllClientCtlAction | 1.3.6.1.4.1.259.10.1.5.1.17.9.15.4 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Action for IP filter control. Set this object to create(2) to create entries in the ipFilterSnmpInetTable, ipFilterHttpInetTable and ipFilterTelnetInetTable. Set this object to destroy(3) to destroy specified entries in the ipFilterSnmpInetTable, ipFilterHttpInetTable and ipFilterTelnetInetTable. When the action is finshed, whether successfully or not, or no action is taken, the value of this object is always noAction(1).
| |||||||||||||
| NuserAuthMgt | 1.3.6.1.4.1.259.10.1.5.1.17.10 | ||||||||||||
| SuserAuthEnablePassword | 1.3.6.1.4.1.259.10.1.5.1.17.10.3 | DisplayString (SIZE (0..32)) | RW | ||||||||||
scalar · DisplayString (SIZE (0..32)) · read-write · current Set enable password or delete enable password. NULL is used to delete the enable password. The password is starting with alphanumeric. | |||||||||||||
| SuserAuthMethod | 1.3.6.1.4.1.259.10.1.5.1.17.10.4 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Set user authencation method for system.
| |||||||||||||
| TuserAuthTable | 1.3.6.1.4.1.259.10.1.5.1.17.10.5 | NA | |||||||||||
table · not-accessible · current This table is for creating the new user. | |||||||||||||
| RuserAuthEntry | 1.3.6.1.4.1.259.10.1.5.1.17.10.5.1 | NA | |||||||||||
row · not-accessible · current Entries in this table correspond to the users entries in system.
| |||||||||||||
| CuserAuthUserName | 1.3.6.1.4.1.259.10.1.5.1.17.10.5.1.1 | DisplayString (SIZE (1..8)) | NA | ||||||||||
column · DisplayString (SIZE (1..8)) · not-accessible · current The name of the user. The user name is starting with alphanumeric. | |||||||||||||
| CuserAuthPassword | 1.3.6.1.4.1.259.10.1.5.1.17.10.5.1.2 | DisplayString (SIZE (0..32)) | RC | ||||||||||
column · DisplayString (SIZE (0..32)) · read-create · current Specifies the user password. zero length input will set the user enrty without password. If the user is not exist, it will create the user with the giving password and privilege 0. The password is starting with alphanumeric. | |||||||||||||
| CuserAuthPrivilege | 1.3.6.1.4.1.259.10.1.5.1.17.10.5.1.3 | Integer32 (0..15) | RC | ||||||||||
column · Integer32 (0..15) · read-create · current Specifies the user level. If the user is not exist, it will create the user with the giving privilege with none password. Privilege 15 is maximum privilege that only can be applied to system administrator. | |||||||||||||
| CuserAuthPublicKey | 1.3.6.1.4.1.259.10.1.5.1.17.10.5.1.4 | DisplayString | RO | ||||||||||
column · DisplayString · read-only · current User public key, the value can be 'RSA' or 'DSA' or 'Both' or 'None'. | |||||||||||||
| CuserAuthStatus | 1.3.6.1.4.1.259.10.1.5.1.17.10.5.1.5 | Integer32 (0..1) | RC | ||||||||||
column · Integer32 (0..1) · read-create · current This node is used to create the user entry by '1' and to delete one user entry by '0'. | |||||||||||||
| Ndot1xMgt | 1.3.6.1.4.1.259.10.1.5.1.17.11 | ||||||||||||
| Tdot1xAuthConfigExtTable | 1.3.6.1.4.1.259.10.1.5.1.17.11.1 | NA | |||||||||||
table · not-accessible · current The extension table of dot1xAuthConfigTable. | |||||||||||||
| Rdot1xAuthConfigExtEntry | 1.3.6.1.4.1.259.10.1.5.1.17.11.1.1 | NA | |||||||||||
| Cdot1xAuthConfigExtOperMode | 1.3.6.1.4.1.259.10.1.5.1.17.11.1.1.1 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current The operation mode of dot1x port which allows host connection to 802.1x-authorized ports.
| |||||||||||||
| Cdot1xAuthConfigExtMultiHostMaxCnt | 1.3.6.1.4.1.259.10.1.5.1.17.11.1.1.2 | Integer32 (1..1024) | RW | ||||||||||
column · Integer32 (1..1024) · read-write · current The maximum number of hosts when the dot1xAuthConfigExtOperMode is multiHost(2). When the operation Mode is singleHost(1), we can ignore this variables. | |||||||||||||
| Cdot1xAuthConfigExtPortIntrusionAction | 1.3.6.1.4.1.259.10.1.5.1.17.11.1.1.3 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Responses to intrusion when the authentication is failed; block-traffic(1) means that to block traffic when the authentication is failed and guest-vlan(2) means that to join to a guest VLAN when the authentication is failed.
| |||||||||||||
| Sdot1xEapolPassThrough | 1.3.6.1.4.1.259.10.1.5.1.17.11.3 | EnabledStatus | RW | ||||||||||
scalar · EnabledStatus · read-write · current When this variable is enabled(1), EAPOL frames will be forwarded to all ports where the Spanning Tree status is forwarding. When this variable is disabled(2), EAPOL frames will be discarded. EAPOL Pass-Through operates when the global status of 802.1X is disabled. | |||||||||||||
| NaaaMgt | 1.3.6.1.4.1.259.10.1.5.1.17.12 | ||||||||||||
| TaaaMethodTable | 1.3.6.1.4.1.259.10.1.5.1.17.12.1 | NA | |||||||||||
table · not-accessible · current Contains the settings needed for accounting. | |||||||||||||
| RaaaMethodEntry | 1.3.6.1.4.1.259.10.1.5.1.17.12.1.1 | NA | |||||||||||
| CaaaMethodIndex | 1.3.6.1.4.1.259.10.1.5.1.17.12.1.1.1 | Integer32 | NA | ||||||||||
column · Integer32 · not-accessible · current Specifies the index for the entry. | |||||||||||||
| CaaaMethodName | 1.3.6.1.4.1.259.10.1.5.1.17.12.1.1.2 | DisplayString (SIZE (1..255)) | RC | ||||||||||
column · DisplayString (SIZE (1..255)) · read-create · current Name for the method. | |||||||||||||
| CaaaMethodGroupName | 1.3.6.1.4.1.259.10.1.5.1.17.12.1.1.3 | DisplayString (SIZE (1..255)) | RC | ||||||||||
column · DisplayString (SIZE (1..255)) · read-create · current Name for the server to use, pointing to aaaRadiusGroupName or aaaTacacsPlusGroupName. | |||||||||||||
| CaaaMethodMode | 1.3.6.1.4.1.259.10.1.5.1.17.12.1.1.4 | INTEGER | RC | ||||||||||
column · INTEGER · read-create · current start-stop(1),sends a 'start' accounting notice at the beginning of a process and a 'stop' accounting notice at the end of a process. The 'start' accounting record is sent in the background. The requested user process begins regardless of whether or not the 'start' accounting notice was received by the accounting server.
| |||||||||||||
| CaaaMethodStatus | 1.3.6.1.4.1.259.10.1.5.1.17.12.1.1.5 | ValidStatus | RC | ||||||||||
column · ValidStatus · read-create · current Set to 1 to initiate the aaaMethodTable, 2 to destroy the table. | |||||||||||||
| CaaaMethodClientType | 1.3.6.1.4.1.259.10.1.5.1.17.12.1.1.6 | INTEGER | RC | ||||||||||
column · INTEGER · read-create · current dot1x(1): Provides accounting service for 802.1x activity; exec(2): Provides accounting service for EXEC connection such as Telnet, SSH or console.
| |||||||||||||
| TaaaRadiusGroupTable | 1.3.6.1.4.1.259.10.1.5.1.17.12.2 | NA | |||||||||||
table · not-accessible · current Uses a subset of RADIUS servers for accounting as defined by the server group | |||||||||||||
| RaaaRadiusGroupEntry | 1.3.6.1.4.1.259.10.1.5.1.17.12.2.1 | NA | |||||||||||
| CaaaRadiusGroupIndex | 1.3.6.1.4.1.259.10.1.5.1.17.12.2.1.1 | Integer32 | NA | ||||||||||
column · Integer32 · not-accessible · current Specifies the index for the entry. | |||||||||||||
| CaaaRadiusGroupServerBitMap | 1.3.6.1.4.1.259.10.1.5.1.17.12.2.1.2 | OCTET STRING (SIZE (1)) | RC | ||||||||||
column · OCTET STRING (SIZE (1)) · read-create · current Identifies which RADIUS sever to use, each bit points to each radius server. 80 (1000 0000) point to radius server 1, C0 (11000000) points to radius 1 and radius 2. | |||||||||||||
| CaaaRadiusGroupName | 1.3.6.1.4.1.259.10.1.5.1.17.12.2.1.3 | DisplayString | RC | ||||||||||
column · DisplayString · read-create · current Uses a subset of servers for accounting as defined by the server group. The same name as aaaTacasPlusGroupName is not allowed. | |||||||||||||
| CaaaRadiusGroupStatus | 1.3.6.1.4.1.259.10.1.5.1.17.12.2.1.4 | ValidStatus | RC | ||||||||||
column · ValidStatus · read-create · current Set to 1 to initiate the aaaRadiusGroupTable, 2 to destroy the table. | |||||||||||||
| TaaaTacacsPlusGroupTable | 1.3.6.1.4.1.259.10.1.5.1.17.12.3 | NA | |||||||||||
table · not-accessible · current Uses a subset of TACACS+ servers for accounting as defined by the server group | |||||||||||||
| RaaaTacacsPlusGroupEntry | 1.3.6.1.4.1.259.10.1.5.1.17.12.3.1 | NA | |||||||||||
row · not-accessible · current A conceptual row of aaaTacacsPlusGroupEntry. | |||||||||||||
| CaaaTacacsPlusGroupIndex | 1.3.6.1.4.1.259.10.1.5.1.17.12.3.1.1 | Integer32 | NA | ||||||||||
column · Integer32 · not-accessible · current Specifies the index for the entry. | |||||||||||||
| CaaaTacacsPlusGroupServerBitMap | 1.3.6.1.4.1.259.10.1.5.1.17.12.3.1.2 | OCTET STRING (SIZE (1)) | RC | ||||||||||
column · OCTET STRING (SIZE (1)) · read-create · current Identifies which TACACS+ sever to use. | |||||||||||||
| CaaaTacacsPlusGroupName | 1.3.6.1.4.1.259.10.1.5.1.17.12.3.1.3 | DisplayString | RC | ||||||||||
column · DisplayString · read-create · current Uses a subset of servers for accounting as defined by the server group. We can't have the same name as aaaRadiusGroupName | |||||||||||||
| CaaaTacacsPlusGroupStatus | 1.3.6.1.4.1.259.10.1.5.1.17.12.3.1.4 | ValidStatus | RC | ||||||||||
column · ValidStatus · read-create · current Set to 1 to initiate the aaaRadiusGroupTable, 2 to destroy the table. | |||||||||||||
| SaaaUpdate | 1.3.6.1.4.1.259.10.1.5.1.17.12.4 | Integer32 (1..2147483647) | RW | ||||||||||
scalar · Integer32 (1..2147483647) · read-write · current Specifies the periodic interim accounting records to be sent to the accounting server and periodic intervals to send accounting update records(in minutes). | |||||||||||||
| TaaaAccountTable | 1.3.6.1.4.1.259.10.1.5.1.17.12.5 | NA | |||||||||||
table · not-accessible · current Specifies an interface or a set of interfaces that the accounting method list will be applied to. | |||||||||||||
| RaaaAccountEntry | 1.3.6.1.4.1.259.10.1.5.1.17.12.5.1 | NA | |||||||||||
| CaaaAccountIfIndex | 1.3.6.1.4.1.259.10.1.5.1.17.12.5.1.1 | Integer32 | NA | ||||||||||
column · Integer32 · not-accessible · current Defined as the ifIndex | |||||||||||||
| CaaaAccountMethodName | 1.3.6.1.4.1.259.10.1.5.1.17.12.5.1.2 | DisplayString | RC | ||||||||||
column · DisplayString · read-create · current Specifies the name of the list of accounting methods to use. If no method name is specified, the system uses the default. | |||||||||||||
| CaaaAccountProtocol | 1.3.6.1.4.1.259.10.1.5.1.17.12.5.1.3 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current Get the protocol type of a list method to know which server (RADIUS or TACACS+) is in use. | |||||||||||||
| CaaaAccountStatus | 1.3.6.1.4.1.259.10.1.5.1.17.12.5.1.4 | ValidStatus | RC | ||||||||||
column · ValidStatus · read-create · current Set to 1 to initiate the aaaRadiusGroupTable, 2 to destroy the table. | |||||||||||||
| TaaaAccExecTable | 1.3.6.1.4.1.259.10.1.5.1.17.12.9 | NA | |||||||||||
table · not-accessible · current Specifies an interface or a set of interfaces that the accounting method list will be applied to. | |||||||||||||
| RaaaAccExecEntry | 1.3.6.1.4.1.259.10.1.5.1.17.12.9.1 | NA | |||||||||||
| CaaaAccExecIndex | 1.3.6.1.4.1.259.10.1.5.1.17.12.9.1.1 | INTEGER | NA | ||||||||||
column · INTEGER · not-accessible · current The method of accessing CLI management.
| |||||||||||||
| CaaaAccExecMethodName | 1.3.6.1.4.1.259.10.1.5.1.17.12.9.1.2 | DisplayString | RC | ||||||||||
column · DisplayString · read-create · current Specifies the name of the list of accounting methods to use. If no method name is specified, the system uses the default. | |||||||||||||
| NnetworkAccessMgt | 1.3.6.1.4.1.259.10.1.5.1.17.13 | ||||||||||||
| TnetworkAccessPortTable | 1.3.6.1.4.1.259.10.1.5.1.17.13.2 | NA | |||||||||||
table · not-accessible · current A table contains the information of network access about every port. | |||||||||||||
| RnetworkAccessPortEntry | 1.3.6.1.4.1.259.10.1.5.1.17.13.2.1 | NA | |||||||||||
row · not-accessible · current A conceptual row in the networkAccessPort table. | |||||||||||||
| CnetworkAccessPortPortIndex | 1.3.6.1.4.1.259.10.1.5.1.17.13.2.1.1 | Integer32 | NA | ||||||||||
column · Integer32 · not-accessible · current The port and the trunk (excluding trunk members) interface of the portTable. The interface identified by a particular value of this port index is the same interface identified by the same value of ifIndex in the IF-MIB. | |||||||||||||
| CnetworkAccessPortDynamicVlan | 1.3.6.1.4.1.259.10.1.5.1.17.13.2.1.2 | EnabledStatus | RW | ||||||||||
column · EnabledStatus · read-write · current Sets enabled(1) to enable dynamic VLAN assigment and sets disabled(2) to disable dynamic VLAN assigment. | |||||||||||||
| CnetworkAccessPortMaxMacCount | 1.3.6.1.4.1.259.10.1.5.1.17.13.2.1.3 | Integer32 (0..1024) | RW | ||||||||||
column · Integer32 (0..1024) · read-write · current Specifies the maximum number of authenticated MAC address. | |||||||||||||
| CnetworkAccessPortMode | 1.3.6.1.4.1.259.10.1.5.1.17.13.2.1.4 | EnabledStatus | RW | ||||||||||
column · EnabledStatus · read-write · current Specifies the secure port mode. enabled(1) means that Mac address authentication is used and disabled(2) means that the authentication is disabled. | |||||||||||||
| CnetworkAccessPortMacFilter | 1.3.6.1.4.1.259.10.1.5.1.17.13.2.1.5 | Integer32 (0..64) | RW | ||||||||||
column · Integer32 (0..64) · read-write · current Specifies the MAC filter ID, Set this variable to zero to disable MAC filter. | |||||||||||||
| CnetworkAccessPortGuestVlan | 1.3.6.1.4.1.259.10.1.5.1.17.13.2.1.6 | Integer32 (0..4094) | RW | ||||||||||
column · Integer32 (0..4094) · read-write · current Specifies the guest VLAN ID. To disable the VLAN, set the value to 0. | |||||||||||||
| CnetworkAccessPortLinkDetectionStatus | 1.3.6.1.4.1.259.10.1.5.1.17.13.2.1.7 | EnabledStatus | RW | ||||||||||
column · EnabledStatus · read-write · current Set this object to enabled(1) to enable link detection. Set this object to disabled(2) to disable link detection. | |||||||||||||
| CnetworkAccessPortLinkDetectionMode | 1.3.6.1.4.1.259.10.1.5.1.17.13.2.1.8 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Specifies the detection event for a port. Set this object to linkUp(1) to detect a link-up event. Set this object to linkDown(2) to detect a link-down event. Set this object to linkUpDown(3) to detect both link up and link down events.
| |||||||||||||
| CnetworkAccessPortLinkDetectionAciton | 1.3.6.1.4.1.259.10.1.5.1.17.13.2.1.9 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Specifies the action to take when a networkAccessPortLinkDetection event is triggered. Set this object to trap(1) to send a trap when a networkAccessPortLinkDetection event is triggered. Set this object to shutDown(2) to shut down the port when a networkAccessPortLinkDetection event is triggered. Set this object to trapAndShutDown(3) to send a trap and shut down the port when a networkAccessPortLinkDetection event is triggered.
| |||||||||||||
| CnetworkAccessPortDynamicQos | 1.3.6.1.4.1.259.10.1.5.1.17.13.2.1.10 | EnabledStatus | RW | ||||||||||
column · EnabledStatus · read-write · current Set this object to enabled(1) to enable Dynamic QoS. Set this object to disabled(2) to disable Dynamic QoS. | |||||||||||||
| NnetworkAccessClearMacAddressMgt | 1.3.6.1.4.1.259.10.1.5.1.17.13.3 | ||||||||||||
| SnetworkAccessClearMacAddressAttribute | 1.3.6.1.4.1.259.10.1.5.1.17.13.3.1 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Attribute for clearing Mac address. Specifies the certain attribute in Mac address table. all(1) indicates both reauthorized and learnt secure MAC address; static(2) indicates reauthorized MAC address; dynamic(3) indicates learnt secure MAC address.
| |||||||||||||
| SnetworkAccessClearMacAddressMacAddress | 1.3.6.1.4.1.259.10.1.5.1.17.13.3.2 | MacAddress | RW | ||||||||||
scalar · MacAddress · read-write · current Specifies MAC address in the MAC address table for clearing MAC address. '000000' represents that no MAC address is specified. | |||||||||||||
| SnetworkAccessClearMacAddressPort | 1.3.6.1.4.1.259.10.1.5.1.17.13.3.3 | Integer32 | RW | ||||||||||
scalar · Integer32 · read-write · current The specifies port in the MAC address table for clearing MAC address. '0' represents that no port is specified. | |||||||||||||
| SnetworkAccessClearMacAddressAction | 1.3.6.1.4.1.259.10.1.5.1.17.13.3.4 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Action for clearing MAC address . When setting this object to clear(2) to begin the clearing MAC address operation, a particular MAC address is cleared from the MAC address table. When the action is finshed whether or not it is successful or no action is taken, the value of this object is always noclear(1).
| |||||||||||||
| TnetworkAccessMacAddressTable | 1.3.6.1.4.1.259.10.1.5.1.17.13.4 | NA | |||||||||||
table · not-accessible · current Contains the information of network access MAC addresses. | |||||||||||||
| RnetworkAccessMacAddressEntry | 1.3.6.1.4.1.259.10.1.5.1.17.13.4.1 | NA | |||||||||||
row · not-accessible · current A conceptual row in the networkAccessMacAddress table. | |||||||||||||
| CnetworkAccessMacAddressAddress | 1.3.6.1.4.1.259.10.1.5.1.17.13.4.1.1 | MacAddress | NA | ||||||||||
column · MacAddress · not-accessible · current Specifies the authenticated MAC address. | |||||||||||||
| CnetworkAccessMacAddressPort | 1.3.6.1.4.1.259.10.1.5.1.17.13.4.1.2 | Integer32 | NA | ||||||||||
column · Integer32 · not-accessible · current Specifies the port of authenticated MAC address. | |||||||||||||
| CnetworkAccessMacAddressInetAddressType | 1.3.6.1.4.1.259.10.1.5.1.17.13.4.1.3 | InetAddressType | RO | ||||||||||
column · InetAddressType · read-only · current This object indicates the type of IP address denoted in networkAccessMacAddressRadiusServerInetAddress type. | |||||||||||||
| CnetworkAccessMacAddressRadiusServerInetAddress | 1.3.6.1.4.1.259.10.1.5.1.17.13.4.1.4 | InetAddress | RO | ||||||||||
column · InetAddress · read-only · current Displays the IP address of radius server that authenticates the specified Mac address. | |||||||||||||
| CnetworkAccessMacAddressTime | 1.3.6.1.4.1.259.10.1.5.1.17.13.4.1.5 | DisplayString (SIZE (12)) | RO | ||||||||||
column · DisplayString (SIZE (12)) · read-only · current Displays the authentication time of the authenticated MAC address. The following form is a text string; 'yyyy MMm DDd HHh MMm SSs'. 'yyyy' is a four-digit year. 'MM' is a month. A single-digit month is preceded by a zero. 'DD' is the day of a month. A single-digit day is preceded by the value zero. 'HH', 'MM' and 'SS' are hour, minute, and second respectively. A single-digit hour, minute, and second are preceded by a zero value. An example is: '2001y 01m 01d 00h 04m 43s'. | |||||||||||||
| CnetworkAccessMacAddressAttribute | 1.3.6.1.4.1.259.10.1.5.1.17.13.4.1.6 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current Displays the attribute of an authenticated MAC address. static(1) indicates resauthorized secure MAC address. dynamic(2) indicates learnt secure MAC address.
| |||||||||||||
| SnetworkAccessAging | 1.3.6.1.4.1.259.10.1.5.1.17.13.5 | EnabledStatus | RW | ||||||||||
scalar · EnabledStatus · read-write · current Set this object to enabled(1) to enable MAC address aging feature. Set this object to disabled(2) to disable MAC address aging feature. | |||||||||||||
| TnetworkAccessMacFilterWithMaskTable | 1.3.6.1.4.1.259.10.1.5.1.17.13.6 | NA | |||||||||||
table · not-accessible · current Contains the settings for MAC filter. | |||||||||||||
| RnetworkAccessMacFilterWithMaskEntry | 1.3.6.1.4.1.259.10.1.5.1.17.13.6.1 | NA | |||||||||||
row · not-accessible · current A conceptual row in the networkAccessMacFilterWithMaskTable. | |||||||||||||
| CnetworkAccessMacFilterWithMaskID | 1.3.6.1.4.1.259.10.1.5.1.17.13.6.1.1 | Integer32 | NA | ||||||||||
column · Integer32 · not-accessible · current Specifies the MAC filter ID. | |||||||||||||
| CnetworkAccessMacFilterWithMaskMacAddress | 1.3.6.1.4.1.259.10.1.5.1.17.13.6.1.2 | MacAddress | NA | ||||||||||
column · MacAddress · not-accessible · current Specifies the MAC address to be filtered. | |||||||||||||
| CnetworkAccessMacFilterWithMaskMacAddressMask | 1.3.6.1.4.1.259.10.1.5.1.17.13.6.1.3 | MacAddress | NA | ||||||||||
column · MacAddress · not-accessible · current Specifies the MAC mask to be filtered. | |||||||||||||
| CnetworkAccessMacFilterWithMaskStatus | 1.3.6.1.4.1.259.10.1.5.1.17.13.6.1.4 | ValidStatus | RC | ||||||||||
column · ValidStatus · read-create · current Set this object to valid(1) to create an entry. Set this object to invalid(2) to destroy an entry. | |||||||||||||
| NmacAuthMgt | 1.3.6.1.4.1.259.10.1.5.1.17.14 | ||||||||||||
| SmacAuthReauthTime | 1.3.6.1.4.1.259.10.1.5.1.17.14.1 | Integer32 (120..1000000) | RW | ||||||||||
scalar · Integer32 (120..1000000) · read-write · current Specifies the reauthentication time period. | |||||||||||||
| TmacAuthPortTable | 1.3.6.1.4.1.259.10.1.5.1.17.14.2 | NA | |||||||||||
table · not-accessible · current Contains the settings for mac authentication of each port. | |||||||||||||
| RmacAuthPortEntry | 1.3.6.1.4.1.259.10.1.5.1.17.14.2.1 | NA | |||||||||||
| CmacAuthPortIndex | 1.3.6.1.4.1.259.10.1.5.1.17.14.2.1.1 | Integer32 | NA | ||||||||||
column · Integer32 · not-accessible · current The port and the trunk (including trunk members) interface of the port table. The interface identified by a particular value of this index is the same interface identified by the same value of ifIndex in the IF-MIB. | |||||||||||||
| CmacAuthPortMaxMacCount | 1.3.6.1.4.1.259.10.1.5.1.17.14.2.1.2 | Integer32 (0..1024) | RW | ||||||||||
column · Integer32 (0..1024) · read-write · current Specifies the maximum number of authenticated MAC addresses for MAC authentication. | |||||||||||||
| CmacAuthPortIntrusionAction | 1.3.6.1.4.1.259.10.1.5.1.17.14.2.1.3 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Responses to intrusion when the authentication is failed. block-traffic(1) : denies network access to an unauthorized client; pass-traffic(2) : allows unauthorized clients to the access network.
| |||||||||||||
| NwebAuthMgt | 1.3.6.1.4.1.259.10.1.5.1.17.15 | ||||||||||||
| SwebAuthSystemAuthControl | 1.3.6.1.4.1.259.10.1.5.1.17.15.1 | EnabledStatus | RW | ||||||||||
scalar · EnabledStatus · read-write · current Sets enabled(1) to enable WebAuth feature and sets disabled(2) to disable WebAuth feature. | |||||||||||||
| SwebAuthSessionTimeout | 1.3.6.1.4.1.259.10.1.5.1.17.15.5 | INTEGER (300..3600) | RW | ||||||||||
scalar · INTEGER (300..3600) · read-write · current For authenticated success users, they can use internet service during a certain period. Whenever this period expires, users need to be re-authenticated again. This period is called session time. | |||||||||||||
| SwebAuthQuietPeriod | 1.3.6.1.4.1.259.10.1.5.1.17.15.6 | INTEGER (1..180) | RW | ||||||||||
scalar · INTEGER (1..180) · read-write · current Specifies the re-authentication interval when the authentication fail attempts reach the webAuthLoginAttempts value. Unauthenticated user won't be authenticated during this period. | |||||||||||||
| SwebAuthLoginAttempts | 1.3.6.1.4.1.259.10.1.5.1.17.15.7 | INTEGER (1..3) | RW | ||||||||||
scalar · INTEGER (1..3) · read-write · current Specifies the counter that configures the authentication fail times for a client. If authentication fail times reaches the specified value, the client are not allowed to login for some period. | |||||||||||||
| NwebAuthReauthenticateMgt | 1.3.6.1.4.1.259.10.1.5.1.17.15.8 | ||||||||||||
| SwebAuthReauthenticatePort | 1.3.6.1.4.1.259.10.1.5.1.17.15.8.1 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Specifies the port to re-authenticate for all of its authenticated hosts. | |||||||||||||
| SwebAuthReauthenticateInetAddressType | 1.3.6.1.4.1.259.10.1.5.1.17.15.8.2 | InetAddressType | RW | ||||||||||
scalar · InetAddressType · read-write · current Specifies host type to re-authenticate. | |||||||||||||
| SwebAuthReauthenticateInetAddress | 1.3.6.1.4.1.259.10.1.5.1.17.15.8.3 | InetAddress | RW | ||||||||||
scalar · InetAddress · read-write · current Specificies host to re-authenticate. | |||||||||||||
| SwebAuthReauthenticateAction | 1.3.6.1.4.1.259.10.1.5.1.17.15.8.4 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Action for WebAuth re-authenication. When setting this object to reauth(2) to begin the re-authenticated operation, a particular user is re-authenticated. When the action is finshed whether it is successfully, or no action is taken, the value of this object is always noReauth(1).
| |||||||||||||
| TwebAuthPortConfigTable | 1.3.6.1.4.1.259.10.1.5.1.17.15.9 | NA | |||||||||||
table · not-accessible · current Contains the settings for web authentication of each port. | |||||||||||||
| RwebAuthPortConfigEntry | 1.3.6.1.4.1.259.10.1.5.1.17.15.9.1 | NA | |||||||||||
row · not-accessible · current A conceptual row in the webAuthPortConfigTable. | |||||||||||||
| CwebAuthPortConfigPortIndex | 1.3.6.1.4.1.259.10.1.5.1.17.15.9.1.1 | INTEGER | NA | ||||||||||
column · INTEGER · not-accessible · current The port number of the port that may specify certain entry in the table which contains web authentication information. | |||||||||||||
| CwebAuthPortConfigStatus | 1.3.6.1.4.1.259.10.1.5.1.17.15.9.1.2 | EnabledStatus | RW | ||||||||||
column · EnabledStatus · read-write · current Sets enabled(1) to enable web authentication feature for each port and sets disabled(2) to disable web authentication for each port. | |||||||||||||
| CwebAuthPortConfigAuthenticatedHostCount | 1.3.6.1.4.1.259.10.1.5.1.17.15.9.1.3 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current Displays the authenticated host counts for each port | |||||||||||||
| TwebAuthPortInfoTable | 1.3.6.1.4.1.259.10.1.5.1.17.15.10 | NA | |||||||||||
table · not-accessible · current Contains the information for web authentication of each port. | |||||||||||||
| RwebAuthPortInfoEntry | 1.3.6.1.4.1.259.10.1.5.1.17.15.10.1 | NA | |||||||||||
row · not-accessible · current A conceptual row in the webAuthPortTable. | |||||||||||||
| CwebAuthPortInfoPortIndex | 1.3.6.1.4.1.259.10.1.5.1.17.15.10.1.1 | INTEGER | NA | ||||||||||
column · INTEGER · not-accessible · current The port number for which this entry contains web authentication information. | |||||||||||||
| CwebAuthPortInfoPortAuthSuccessIndex | 1.3.6.1.4.1.259.10.1.5.1.17.15.10.1.2 | INTEGER | NA | ||||||||||
column · INTEGER · not-accessible · current The authentication success number of port for which this entry contains web authentication information. | |||||||||||||
| CwebAuthPortInfoInetAddressType | 1.3.6.1.4.1.259.10.1.5.1.17.15.10.1.3 | InetAddressType | RO | ||||||||||
column · InetAddressType · read-only · current This object indicates the type of IP address denoted in webAuthPortInfoIpAddress type. | |||||||||||||
| CwebAuthPortInfoInetAddress | 1.3.6.1.4.1.259.10.1.5.1.17.15.10.1.4 | InetAddress | RO | ||||||||||
column · InetAddress · read-only · current The IP address which may specify the entry containing web authentication information. | |||||||||||||
| CwebAuthPortInfoRemainingSessiontime | 1.3.6.1.4.1.259.10.1.5.1.17.15.10.1.5 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current The remaining session time for authenticated hosts. During this period, they may use internet resource. When the session time expires, they will need to re-authenticate again. | |||||||||||||
| CwebAuthPortInfoStatus | 1.3.6.1.4.1.259.10.1.5.1.17.15.10.1.6 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current Displays the web authentication status for each port. authenticated (1) means the user is authenticated.
| |||||||||||||
| Nlayer3Mgt | 1.3.6.1.4.1.259.10.1.5.1.18 | ||||||||||||
| NarpMgt | 1.3.6.1.4.1.259.10.1.5.1.18.1 | ||||||||||||
| SarpCacheDeleteAll | 1.3.6.1.4.1.259.10.1.5.1.18.1.1 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current To delete all dynamic entries in the ARP cache, write this variable to delete(1). Writing this variable to noDelete(2) has no effect on the device. When read, this variable always returns noDelete(2).
| |||||||||||||
| SarpCacheTimeout | 1.3.6.1.4.1.259.10.1.5.1.18.1.2 | Integer32 (300..86400) | RW | ||||||||||
scalar · Integer32 (300..86400) · read-write · current Timeout is provided for entries in the ARP Cache. It is for dynamic mapping only. Static mapping by creating an entry that associates a logical address with a physical address is never aged out. | |||||||||||||
| NarpTrafficStatistics | 1.3.6.1.4.1.259.10.1.5.1.18.1.3 | ||||||||||||
| SarpStatSendRequestPackets | 1.3.6.1.4.1.259.10.1.5.1.18.1.3.1 | Counter32 | RO | ||||||||||
scalar · Counter32 · read-only · current The number of ARP Request packets sent by the ARP process. | |||||||||||||
| SarpStatRcvRequestPackets | 1.3.6.1.4.1.259.10.1.5.1.18.1.3.2 | Counter32 | RO | ||||||||||
scalar · Counter32 · read-only · current The number of ARP Request packets received by the ARP process. | |||||||||||||
| SarpStatSendReplyPackets | 1.3.6.1.4.1.259.10.1.5.1.18.1.3.3 | Counter32 | RO | ||||||||||
scalar · Counter32 · read-only · current The number of ARP Reply packets sent by the ARP process. | |||||||||||||
| SarpStatRcvReplyPackets | 1.3.6.1.4.1.259.10.1.5.1.18.1.3.4 | Counter32 | RO | ||||||||||
scalar · Counter32 · read-only · current The number of ARP Reply packets received by the ARP process. | |||||||||||||
| TarpProxyArpTable | 1.3.6.1.4.1.259.10.1.5.1.18.1.4 | NA | |||||||||||
table · not-accessible · current A list of Proxy ARP status. This table has entries for all static VLANs. | |||||||||||||
| RarpProxyArpEntry | 1.3.6.1.4.1.259.10.1.5.1.18.1.4.1 | NA | |||||||||||
row · not-accessible · current An entry in the table, containing information about Proxy ARP configuration.
| |||||||||||||
| CarpProxyArpIfIndex | 1.3.6.1.4.1.259.10.1.5.1.18.1.4.1.1 | InterfaceIndex | NA | ||||||||||
column · InterfaceIndex · not-accessible · current This is defined as a VLAN interface. A routing interface is a VLAN that binds an IP subnet. | |||||||||||||
| CarpProxyArpStatus | 1.3.6.1.4.1.259.10.1.5.1.18.1.4.1.2 | EnabledStatus | RW | ||||||||||
column · EnabledStatus · read-write · current Enable or disable proxy ARP process on an interface. | |||||||||||||
| NripMgt | 1.3.6.1.4.1.259.10.1.5.1.18.2 | ||||||||||||
| NripBasicTimers | 1.3.6.1.4.1.259.10.1.5.1.18.2.1 | ||||||||||||
| SripUpdateBasicTimer | 1.3.6.1.4.1.259.10.1.5.1.18.2.1.1 | Integer32 (5..2147483647) | RW | ||||||||||
scalar · Integer32 (5..2147483647) · read-write · current The update time in seconds controls the advertising of regular update messages. In the real implementation, the actual timer is this value offset by a random time (+/-50%) each time it is set. | |||||||||||||
| SripTimeoutBasicTimer | 1.3.6.1.4.1.259.10.1.5.1.18.2.1.2 | Integer32 (5..2147483647) | RW | ||||||||||
scalar · Integer32 (5..2147483647) · read-write · current The timeout timer in seconds governs the validity of a route. It is initialized when a route is established, and any time an update message is received for the route. If the setting time elapses from the last time the timeout was initialized, the route is considered to have expired, and the hop count of the route is set to infinite. It should be at least three times the value of the update timer. | |||||||||||||
| SripGarbageCollectionBasicTimer | 1.3.6.1.4.1.259.10.1.5.1.18.2.1.3 | Integer32 (5..2147483647) | RW | ||||||||||
scalar · Integer32 (5..2147483647) · read-write · current When the information about a route becomes invalid, the system does not immediately purge that route from its table. Instead, it continues to advertise the route with an infinite metric. At the same time, the garbage-collection timer is set for that route. When the count reaches zero, the route is purged from the table. This timer allows neighbors to become aware of the invalidity of a route prior to purging. | |||||||||||||
| SripRoutingProcessStatus | 1.3.6.1.4.1.259.10.1.5.1.18.2.2 | EnabledStatus | RW | ||||||||||
scalar · EnabledStatus · read-write · current Enable or disable RIP routing process on a system. | |||||||||||||
| SripGlobalRouterVersion | 1.3.6.1.4.1.259.10.1.5.1.18.2.3 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current To specify a RIP version used globally by the router. If interface version is configurated, router will use the interface configuration; and if version is not configurated on interface, router will use this global version; and if both interface and global are not configurated, router will use interface's default configuration.
| |||||||||||||
| TripInstabilityPreventingTable | 1.3.6.1.4.1.259.10.1.5.1.18.2.4 | NA | |||||||||||
table · not-accessible · current A list of RIP instability preventing status. | |||||||||||||
| RripInstabilityPreventingEntry | 1.3.6.1.4.1.259.10.1.5.1.18.2.4.1 | NA | |||||||||||
row · not-accessible · current An entry in the table, containing information about RIP instability preventing configuration. The ifIndex index is a VLAN's ifIndex.
| |||||||||||||
| CripIfindex | 1.3.6.1.4.1.259.10.1.5.1.18.2.4.1.1 | InterfaceIndex | NA | ||||||||||
column · InterfaceIndex · not-accessible · current This is defined as a VLAN interface. A routing interface is a VLAN and an IP subnet bound to it. | |||||||||||||
| CripSplitHorizonStatus | 1.3.6.1.4.1.259.10.1.5.1.18.2.4.1.2 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Enable or disable RIP poison reverse on an interface.
| |||||||||||||
| SripStatisticsReset | 1.3.6.1.4.1.259.10.1.5.1.18.2.5 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Write it to reset(1), the following objects in RFC 1724 should be reset: 1. Global Counters: 'rip2GlobalRouteChanges', 'rip2GlobalQueries'. 2. Interface Status Table, for each 'rip2IfStatAddress': 'rip2IfStatRcvBadPackets', 'rip2IfStatRcvBadRoutes', 'rip2IfStatSendUpdates' 3. Peer Table, for each 'rip2PeerAddress' and 'rip2PeerDomain', 'rip2PeerRcvBadPackets', 'rip2PeerRcvBadRoutes' When read this value always is noReset(2).
| |||||||||||||
| NripNetwork | 1.3.6.1.4.1.259.10.1.5.1.18.2.6 | ||||||||||||
| TripNetworkByInetAddrTable | 1.3.6.1.4.1.259.10.1.5.1.18.2.6.1 | NA | |||||||||||
table · not-accessible · current The RIP network address table. | |||||||||||||
| RripNetworkByInetAddrEntry | 1.3.6.1.4.1.259.10.1.5.1.18.2.6.1.1 | NA | |||||||||||
row · not-accessible · current A conceptual row of the ripNetworkByInetAddrTable. | |||||||||||||
| CripNetworkByInetAddrAddressType | 1.3.6.1.4.1.259.10.1.5.1.18.2.6.1.1.1 | InetAddressType | NA | ||||||||||
column · InetAddressType · not-accessible · current The RIP Network address type. | |||||||||||||
| CripNetworkByInetAddrAddress | 1.3.6.1.4.1.259.10.1.5.1.18.2.6.1.1.2 | InetAddress | NA | ||||||||||
column · InetAddress · not-accessible · current The RIP Network address. | |||||||||||||
| CripNetworkByInetAddrPfxLen | 1.3.6.1.4.1.259.10.1.5.1.18.2.6.1.1.3 | InetAddressPrefixLength | NA | ||||||||||
column · InetAddressPrefixLength · not-accessible · current Network prefix length. | |||||||||||||
| CripNetworkByInetAddrStatus | 1.3.6.1.4.1.259.10.1.5.1.18.2.6.1.1.4 | ValidStatus | RC | ||||||||||
column · ValidStatus · read-create · current Set this variable to create or destroy a RIP network address. | |||||||||||||
| TripNetworkByIfindexTable | 1.3.6.1.4.1.259.10.1.5.1.18.2.6.2 | NA | |||||||||||
table · not-accessible · current The RIp network ifindex table. | |||||||||||||
| RripNetworkByIfindexEntry | 1.3.6.1.4.1.259.10.1.5.1.18.2.6.2.1 | NA | |||||||||||
row · not-accessible · current A conceptual row of the ripNetworkByIfindexTable.
| |||||||||||||
| CripNetworkIfindex | 1.3.6.1.4.1.259.10.1.5.1.18.2.6.2.1.1 | InterfaceIndex | NA | ||||||||||
column · InterfaceIndex · not-accessible · current This is defined as a layer3 interface. | |||||||||||||
| CripNetworkByIfindexStatus | 1.3.6.1.4.1.259.10.1.5.1.18.2.6.2.1.2 | ValidStatus | RC | ||||||||||
column · ValidStatus · read-create · current Set this variable to create or destroy a RIP network ifindex table. | |||||||||||||
| TripDistributeListTable | 1.3.6.1.4.1.259.10.1.5.1.18.2.7 | NA | |||||||||||
table · not-accessible · current The RIP distribute list table. It's used to filter incoming or outgoing route updates using the access-list or prefix-list. | |||||||||||||
| RripDistributeListEntry | 1.3.6.1.4.1.259.10.1.5.1.18.2.7.1 | NA | |||||||||||
row · not-accessible · current A conceptual row of the ripDistributelistTable. | |||||||||||||
| CripDistributeListInterfaceIndex | 1.3.6.1.4.1.259.10.1.5.1.18.2.7.1.1 | InterfaceIndex | NA | ||||||||||
column · InterfaceIndex · not-accessible · current The index of the interface on which distribute-list is applied, If index is 0, the filter will be applied to all the interfaces. | |||||||||||||
| CripDistributeListType | 1.3.6.1.4.1.259.10.1.5.1.18.2.7.1.2 | INTEGER | NA | ||||||||||
column · INTEGER · not-accessible · current Type of distribute-list applied: access-list or prefix-list.
| |||||||||||||
| CripDistributeListIncomingRouteFilterName | 1.3.6.1.4.1.259.10.1.5.1.18.2.7.1.3 | DisplayString (SIZE (1..15)) | RC | ||||||||||
column · DisplayString (SIZE (1..15)) · read-create · current Specifies access-list or prefix-list name to filter incoming routing updates. | |||||||||||||
| CripDistributeListOutgoingRouteFilterName | 1.3.6.1.4.1.259.10.1.5.1.18.2.7.1.4 | DisplayString (SIZE (1..15)) | RC | ||||||||||
column · DisplayString (SIZE (1..15)) · read-create · current Specifies access-list or prefix-list name to filter outgoing routing updates. | |||||||||||||
| CripDistributeListStatus | 1.3.6.1.4.1.259.10.1.5.1.18.2.7.1.5 | ValidStatus | RC | ||||||||||
column · ValidStatus · read-create · current Set this variable to create or destroy a distribute list. | |||||||||||||
| TripRedistributeTable | 1.3.6.1.4.1.259.10.1.5.1.18.2.8 | NA | |||||||||||
table · not-accessible · current The RIP Redistribute table. Config rip redistribute type, metric. | |||||||||||||
| RripRedistributeEntry | 1.3.6.1.4.1.259.10.1.5.1.18.2.8.1 | NA | |||||||||||
row · not-accessible · current A conceptual row of the ripRedistributeTable. | |||||||||||||
| CripRedistributeProtocol | 1.3.6.1.4.1.259.10.1.5.1.18.2.8.1.1 | INTEGER | NA | ||||||||||
column · INTEGER · not-accessible · current Protocol redistributed to Intermediate System: connected -- redistribute from connected routes; static -- redistribute from static routes; ospf -- redistribute from Open Shortest Path First (OSPF).
| |||||||||||||
| CripRedistributeMetric | 1.3.6.1.4.1.259.10.1.5.1.18.2.8.1.2 | Integer32 (0..16) | RC | ||||||||||
column · Integer32 (0..16) · read-create · current Metric value to be used in redistributing. | |||||||||||||
| CripRedistributeStatus | 1.3.6.1.4.1.259.10.1.5.1.18.2.8.1.3 | ValidStatus | RC | ||||||||||
column · ValidStatus · read-create · current Set this variable to create or destroy redistribute information. | |||||||||||||
| SripDefaultMetric | 1.3.6.1.4.1.259.10.1.5.1.18.2.9 | Integer32 (1..16) | RW | ||||||||||
scalar · Integer32 (1..16) · read-write · current A metric for redistribute routes. | |||||||||||||
| TripNeighborTable | 1.3.6.1.4.1.259.10.1.5.1.18.2.10 | NA | |||||||||||
table · not-accessible · current The RIP neighbor table. | |||||||||||||
| RripNeighborEntry | 1.3.6.1.4.1.259.10.1.5.1.18.2.10.1 | NA | |||||||||||
row · not-accessible · current A conceptual row of the ripNeighborTable. | |||||||||||||
| CripNeighborAddressType | 1.3.6.1.4.1.259.10.1.5.1.18.2.10.1.1 | InetAddressType | NA | ||||||||||
column · InetAddressType · not-accessible · current The RIP Neighbor address type. | |||||||||||||
| CripNeighborAddress | 1.3.6.1.4.1.259.10.1.5.1.18.2.10.1.2 | InetAddress | NA | ||||||||||
column · InetAddress · not-accessible · current The RIP Neighbor address. | |||||||||||||
| CripNeighborAddressStatus | 1.3.6.1.4.1.259.10.1.5.1.18.2.10.1.3 | ValidStatus | RC | ||||||||||
column · ValidStatus · read-create · current Set this variable to create or destroy a RIP neighbor address. | |||||||||||||
| TripPassiveInterfaceTable | 1.3.6.1.4.1.259.10.1.5.1.18.2.11 | NA | |||||||||||
table · not-accessible · current A list of RIP passive interface status. | |||||||||||||
| RripPassiveInterfaceEntry | 1.3.6.1.4.1.259.10.1.5.1.18.2.11.1 | NA | |||||||||||
row · not-accessible · current An entry in the table, containing information about RIP passive interface(s) configuration. The index is a VLAN's ifIndex.
| |||||||||||||
| CripInterfaceIndex | 1.3.6.1.4.1.259.10.1.5.1.18.2.11.1.1 | InterfaceIndex | NA | ||||||||||
column · InterfaceIndex · not-accessible · current This is defined as a VLAN interface. A passive VLAN interface will suppress route updates on it. | |||||||||||||
| CripPassiveInterfaceStatus | 1.3.6.1.4.1.259.10.1.5.1.18.2.11.1.2 | ValidStatus | RC | ||||||||||
column · ValidStatus · read-create · current Set this variable to create or destroy a RIP passive interface. | |||||||||||||
| SripMaxPrefix | 1.3.6.1.4.1.259.10.1.5.1.18.2.12 | Integer32 (1..10240) | RW | ||||||||||
scalar · Integer32 (1..10240) · read-write · current Max number of RIP dynamic routes. | |||||||||||||
| NripRouteClear | 1.3.6.1.4.1.259.10.1.5.1.18.2.13 | ||||||||||||
| SripRouteClearByType | 1.3.6.1.4.1.259.10.1.5.1.18.2.13.1 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Write this object value 2-6 to clear rip route by type, when read, this always return noClear(1).
| |||||||||||||
| TripRouteClearByNetworkTable | 1.3.6.1.4.1.259.10.1.5.1.18.2.13.2 | NA | |||||||||||
table · not-accessible · current Clear rip route by network address. | |||||||||||||
| RripRouteClearByNetworkEntry | 1.3.6.1.4.1.259.10.1.5.1.18.2.13.2.1 | NA | |||||||||||
row · not-accessible · current Clear rip route by network address. | |||||||||||||
| CripRouteClearByNetworkInetAddrType | 1.3.6.1.4.1.259.10.1.5.1.18.2.13.2.1.1 | InetAddressType | NA | ||||||||||
column · InetAddressType · not-accessible · current The RIP route network address type. | |||||||||||||
| CripRouteClearByNetworkInetAddr | 1.3.6.1.4.1.259.10.1.5.1.18.2.13.2.1.2 | InetAddress | NA | ||||||||||
column · InetAddress · not-accessible · current The RIP route network address.Write this object to clear rip route by network address. | |||||||||||||
| CripRouteClearByNetworkPfxLen | 1.3.6.1.4.1.259.10.1.5.1.18.2.13.2.1.3 | InetAddressPrefixLength | NA | ||||||||||
column · InetAddressPrefixLength · not-accessible · current The RIP route network prefix length. | |||||||||||||
| CripRouteClearByNetworkClearAction | 1.3.6.1.4.1.259.10.1.5.1.18.2.13.2.1.4 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Write this object value 2(clear) to clear rip route by spicify network address, when read, this always return noClear(1).
| |||||||||||||
| SripDefaultInformationOriginate | 1.3.6.1.4.1.259.10.1.5.1.18.2.14 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Write this object value 2(originate) to originate default information, write this object value 1(noOriginate) to not originate default information.
| |||||||||||||
| NripDistance | 1.3.6.1.4.1.259.10.1.5.1.18.2.15 | ||||||||||||
| SripDefaultDistance | 1.3.6.1.4.1.259.10.1.5.1.18.2.15.1 | Integer32 (1..255) | RW | ||||||||||
scalar · Integer32 (1..255) · read-write · current Default distance value. | |||||||||||||
| TripDistanceTable | 1.3.6.1.4.1.259.10.1.5.1.18.2.15.2 | NA | |||||||||||
table · not-accessible · current Rip distance table | |||||||||||||
| RripDistanceEntry | 1.3.6.1.4.1.259.10.1.5.1.18.2.15.2.1 | NA | |||||||||||
row · not-accessible · current Rip distance entry | |||||||||||||
| CripDistanceInetAddrType | 1.3.6.1.4.1.259.10.1.5.1.18.2.15.2.1.1 | InetAddressType | NA | ||||||||||
column · InetAddressType · not-accessible · current The RIP distace table network address type. | |||||||||||||
| CripDistanceInetAddr | 1.3.6.1.4.1.259.10.1.5.1.18.2.15.2.1.2 | InetAddress | NA | ||||||||||
column · InetAddress · not-accessible · current The RIP distance table network address. | |||||||||||||
| CripDistancePfxLen | 1.3.6.1.4.1.259.10.1.5.1.18.2.15.2.1.3 | InetAddressPrefixLength | NA | ||||||||||
column · InetAddressPrefixLength · not-accessible · current The RIP distance table network prefix length. | |||||||||||||
| CripDistanceValue | 1.3.6.1.4.1.259.10.1.5.1.18.2.15.2.1.4 | Integer32 (1..255) | RW | ||||||||||
column · Integer32 (1..255) · read-write · current The RIP distance table distance value. | |||||||||||||
| CripDistanceAlistName | 1.3.6.1.4.1.259.10.1.5.1.18.2.15.2.1.5 | DisplayString (SIZE (0..15)) | RC | ||||||||||
column · DisplayString (SIZE (0..15)) · read-create · current The RIP distance table access list name. If delete the access list name ,set null string | |||||||||||||
| CripDistanceRowStatus | 1.3.6.1.4.1.259.10.1.5.1.18.2.15.2.1.6 | RowStatus | RC | ||||||||||
column · RowStatus · read-create · current This object indicates the status of this entry. | |||||||||||||
| NospfMgt | 1.3.6.1.4.1.259.10.1.5.1.18.3 | ||||||||||||
| TospfMultiProcessSystemTable | 1.3.6.1.4.1.259.10.1.5.1.18.3.8 | NA | |||||||||||
table · not-accessible · current A conceptually table for ospfMultiProcessSystemEntry. | |||||||||||||
| RospfMultiProcessSystemEntry | 1.3.6.1.4.1.259.10.1.5.1.18.3.8.1 | NA | |||||||||||
row · not-accessible · current A conceptually row for ospfMultiProcessSystemTable. | |||||||||||||
| CospfMultiProcessProcessId | 1.3.6.1.4.1.259.10.1.5.1.18.3.8.1.1 | Integer32 (0..65535) | NA | ||||||||||
column · Integer32 (0..65535) · not-accessible · current Process ID of an OSPF instance. You can create an OSPF instance from 0 to 65535 with its id. 0 is reserved for default process. | |||||||||||||
| CospfMultiProcessRouterIdType | 1.3.6.1.4.1.259.10.1.5.1.18.3.8.1.2 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current Set router ID automatically or manually.
| |||||||||||||
| CospfMultiProcessRfc1583CompatibleState | 1.3.6.1.4.1.259.10.1.5.1.18.3.8.1.3 | EnabledStatus | RW | ||||||||||
column · EnabledStatus · read-write · current Enable or disable rfc1583 compatibility. | |||||||||||||
| CospfMultiProcessAutoCost | 1.3.6.1.4.1.259.10.1.5.1.18.3.8.1.4 | Integer32 | RW | ||||||||||
column · Integer32 · read-write · current Set the reference bandwidth of auto cost, the unit is Mbps. | |||||||||||||
| CospfMultiProcessOriginateDefaultRoute | 1.3.6.1.4.1.259.10.1.5.1.18.3.8.1.5 | EnabledStatus | RW | ||||||||||
column · EnabledStatus · read-write · current Enable or disable ASBR to generate a default external route into an OSPF domain if the default route already exists. | |||||||||||||
| CospfMultiProcessAdvertiseDefaultRoute | 1.3.6.1.4.1.259.10.1.5.1.18.3.8.1.6 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current If 'always', always advertises default route regardless of whether the default route exists. Note that any operation on it will not take effect unless ospfMultiProcessOriginateDefaultRoute has firstly been enabled.
| |||||||||||||
| CospfMultiProcessExternalMetricType | 1.3.6.1.4.1.259.10.1.5.1.18.3.8.1.7 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current External link type associated with the default route advertised into the OSPF routing domain. Note that any operation on it will not take effect unless ospfMultiProcessOriginateDefaultRoute has firstly been enabled.
| |||||||||||||
| CospfMultiProcessDefaultExternalMetric | 1.3.6.1.4.1.259.10.1.5.1.18.3.8.1.8 | Integer32 (-1..16777214) | RW | ||||||||||
column · Integer32 (-1..16777214) · read-write · current Metric used for generating the default route. Note that any operation on it will not take effect unless ospfMultiProcessOriginateDefaultRoute has firstly been enabled; '-1' is only for 'unset', that will destroy this metric value. | |||||||||||||
| CospfMultiProcessSpfHoldTime | 1.3.6.1.4.1.259.10.1.5.1.18.3.8.1.9 | Integer32 (0..2147483647) | RW | ||||||||||
column · Integer32 (0..2147483647) · read-write · current Sets the hold time between two consecutive SPF calculations. | |||||||||||||
| CospfMultiProcessAreaNumber | 1.3.6.1.4.1.259.10.1.5.1.18.3.8.1.10 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current Records the OSPF area numbers. | |||||||||||||
| CospfMultiProcessAreaLimit | 1.3.6.1.4.1.259.10.1.5.1.18.3.8.1.11 | Gauge32 (1..4294967294) | RW | ||||||||||
column · Gauge32 (1..4294967294) · read-write · current Max number of ospf area. | |||||||||||||
| CospfMultiProcessSystemStatus | 1.3.6.1.4.1.259.10.1.5.1.18.3.8.1.17 | RowStatus | RC | ||||||||||
column · RowStatus · read-create · current The status of this conceptual row entry. This object is used to manage
the creation and deletion of conceptual rows.
Currently only support 4 status:
1. active 2. notInService 4. createAndGo 6. destroy
('active' and 'notInservice' status are used for getting action,
'createAndGo' and 'destroy' status are used for setting action.)
- 'active', which indicates that the current OSPF instance exists in
- the system.
- 'notInService', if not exist in the system.
- 'createAndGo', set this status to create an OSPF instance.
- 'destroy', to delete an OSPF instance. | |||||||||||||
| CospfMultiProcessRouterId | 1.3.6.1.4.1.259.10.1.5.1.18.3.8.1.18 | RouterID | RW | ||||||||||
column · RouterID · read-write · current A 32-bit integer uniquely identifying the router in the Autonomous System. By convention, to ensure uniqueness, this should default to the value of one of the router's IP interface addresses. This object is persistent and when written the entity SHOULD save the change to non-volatile storage. This is a private substitution for ospfRouterId of RFC1253. | |||||||||||||
| CospfMultiProcessAdminStat | 1.3.6.1.4.1.259.10.1.5.1.18.3.8.1.19 | Status | RO | ||||||||||
column · Status · read-only · current The administrative status of OSPF in the router. The value 'enabled' denotes that the OSPF Process is active on at least one interface; 'disabled' disables it on all interfaces. This is a private substitution for ospfAdminStat of RFC1253. | |||||||||||||
| CospfMultiProcessVersionNumber | 1.3.6.1.4.1.259.10.1.5.1.18.3.8.1.20 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current The current version number of the OSPF protocol is 2. This is a private substitution for ospfVersionNumber of RFC1253.
| |||||||||||||
| CospfMultiProcessAreaBdrRtrStatus | 1.3.6.1.4.1.259.10.1.5.1.18.3.8.1.21 | TruthValue | RO | ||||||||||
column · TruthValue · read-only · current A flag to note whether this router is an Area Border Router. This is a private substitution for ospfAreaBdrRtrStatus of RFC1253. | |||||||||||||
| CospfMultiProcessASBdrRtrStatus | 1.3.6.1.4.1.259.10.1.5.1.18.3.8.1.22 | TruthValue | RO | ||||||||||
column · TruthValue · read-only · current A flag to note whether this router is configured as an Autonomous System Border Router. This is a private substitution for ospfAreaBdrRtrStatus of RFC1253. | |||||||||||||
| CospfMultiProcessExternLsaCount | 1.3.6.1.4.1.259.10.1.5.1.18.3.8.1.23 | Gauge32 | RO | ||||||||||
column · Gauge32 · read-only · current The number of external (LS type-5) link state advertisements in the link state database. This is a private substitution for ospfExternLsaCount of RFC1253. | |||||||||||||
| CospfMultiProcessExternLsaCksumSum | 1.3.6.1.4.1.259.10.1.5.1.18.3.8.1.24 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current The 32-bit sum of the LS checksums of the external link state advertisements contained in the link state database. This sum can be used to determine if there has been a change in a router's link state database and to compare the link state database of two routers. The value should be treated as unsigned when comparing two sums of checksums. This is a private substitution for ospfExternLsaCksumSum of RFC1253. | |||||||||||||
| CospfMultiProcessOriginateNewLsas | 1.3.6.1.4.1.259.10.1.5.1.18.3.8.1.25 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current The number of new link state advertisements that have been originated. This number is incremented each time the router originates a new LSA. Discontinuities in the value of this counter can occur at re-initialization of the management system. This is a private substitution for ospfOriginateNewLsas of RFC1253. | |||||||||||||
| CospfMultiProcessRxNewLsas | 1.3.6.1.4.1.259.10.1.5.1.18.3.8.1.26 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current The number of link state advertisements received that are determined to be new instantiations. This number does not include newer instantiations of self-originated link state advertisements. Discontinuities in the value of this counter can occur at re-initialization of the management system. This is a private substitution for ospfRxNewLsas of RFC1253. | |||||||||||||
| CospfMultiProcessAsLsaCount | 1.3.6.1.4.1.259.10.1.5.1.18.3.8.1.30 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current The number of AS-scope link state advertisements in the AS-scope link state database. This is a private substitution for ospfAsLsaCount of RFC4750. | |||||||||||||
| CospfMultiProcessSpfDelayTime | 1.3.6.1.4.1.259.10.1.5.1.18.3.8.1.31 | Integer32 (0..2147483647) | RW | ||||||||||
column · Integer32 (0..2147483647) · read-write · current Sets the delay between receiving a change to SPF calculation. | |||||||||||||
| CospfMultiProcessDefaultMetric | 1.3.6.1.4.1.259.10.1.5.1.18.3.8.1.33 | Integer32 (-1..16777214) | RW | ||||||||||
column · Integer32 (-1..16777214) · read-write · current The default metric for all redistributed routes. If the value is -1, then there is no default metric. | |||||||||||||
| TospfMultiProcessNssaTable | 1.3.6.1.4.1.259.10.1.5.1.18.3.9 | NA | |||||||||||
table · not-accessible · current A conceptually table for ospfNssaEntry. | |||||||||||||
| RospfMultiProcessNssaEntry | 1.3.6.1.4.1.259.10.1.5.1.18.3.9.1 | NA | |||||||||||
row · not-accessible · current A conceptually row for ospfNssaTable. | |||||||||||||
| CospfMultiProcessNssaAreaId | 1.3.6.1.4.1.259.10.1.5.1.18.3.9.1.1 | Unsigned32 | NA | ||||||||||
column · Unsigned32 · not-accessible · current The 32-bit identifier for the NSSA. On creation, this can be derived from the instance. | |||||||||||||
| CospfMultiProcessNssaTranslatorRole | 1.3.6.1.4.1.259.10.1.5.1.18.3.9.1.2 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Specify NSSA-ABR translator-role. Candidate: Router may translate NSSA-LSA to Type-5 LSA if it is elected. Never: Router never translate NSSA-LSA. Always: Router always translate NSSA-LSA to Type-5 LSA.
| |||||||||||||
| CospfMultiProcessNssaRedistributeStatus | 1.3.6.1.4.1.259.10.1.5.1.18.3.9.1.3 | EnabledStatus | RC | ||||||||||
column · EnabledStatus · read-create · current Enabled or disabled to import routes only into the normal areas, but not into the NSSA area. | |||||||||||||
| CospfMultiProcessNssaOriginateDefaultInfoStatus | 1.3.6.1.4.1.259.10.1.5.1.18.3.9.1.4 | EnabledStatus | RC | ||||||||||
column · EnabledStatus · read-create · current Enable or disable to generate a Type 7 default into the NSSA area. | |||||||||||||
| CospfMultiProcessNssaMetricType | 1.3.6.1.4.1.259.10.1.5.1.18.3.9.1.5 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Specify NSSA external metric type.
| |||||||||||||
| CospfMultiProcessNssaMetric | 1.3.6.1.4.1.259.10.1.5.1.18.3.9.1.6 | Integer32 (0..16777214) | RW | ||||||||||
column · Integer32 (0..16777214) · read-write · current Specify NSSA external metric value. | |||||||||||||
| CospfMultiProcessNssaStatus | 1.3.6.1.4.1.259.10.1.5.1.18.3.9.1.7 | RowStatus | RC | ||||||||||
column · RowStatus · read-create · current The status of this conceptual row entry. This object is used to manage
the creation and deletion of conceptual rows.
Currently only support 4 status:
1. active 2. notInService 4. createAndGo 6. destroy
('active' and 'notInservice' status are used for getting action,
'createAndGo' and 'destroy' status are used for setting action.)
- 'active',which indicates that the current NSSA exists in the system.
- 'notInService', if not exist in the system.
- 'createAndGo', set this status to create a NSSA instance.
- 'destroy', to delete a NSSA instance. | |||||||||||||
| CospfMultiProcessNssaTranslatorState | 1.3.6.1.4.1.259.10.1.5.1.18.3.9.1.8 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current Indicates if and how an NSSA border router is performing NSSA translation of type-7 LSAs into type-5 LSAs. When this object is set to enabled, the NSSA Border router's OspfAreaNssaExtTranslatorRole has been set to always. When this object is set to elected, a candidate NSSA Border router is Translating type-7 LSAs into type-5.When this object is set to disabled, a candidate NSSA border router is NOT translating type-7 LSAs into type-5.
| |||||||||||||
| TospfMultiProcessRedistributeTable | 1.3.6.1.4.1.259.10.1.5.1.18.3.10 | NA | |||||||||||
table · not-accessible · current The conceptual table of all of ospfRedistributeEntry. | |||||||||||||
| RospfMultiProcessRedistributeEntry | 1.3.6.1.4.1.259.10.1.5.1.18.3.10.1 | NA | |||||||||||
row · not-accessible · current The conceptual row for ospfRedistributeTable. | |||||||||||||
| CospfMultiProcessRedistributeProtocol | 1.3.6.1.4.1.259.10.1.5.1.18.3.10.1.1 | INTEGER | NA | ||||||||||
column · INTEGER · not-accessible · current Protocol ID, type of the redistribute.
| |||||||||||||
| CospfMultiProcessRedistributeMetricType | 1.3.6.1.4.1.259.10.1.5.1.18.3.10.1.2 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Metric type.
| |||||||||||||
| CospfMultiProcessRedistributeMetric | 1.3.6.1.4.1.259.10.1.5.1.18.3.10.1.3 | BigMetric | RW | ||||||||||
column · BigMetric · read-write · current Metric value. | |||||||||||||
| CospfMultiProcessRedistributeTag | 1.3.6.1.4.1.259.10.1.5.1.18.3.10.1.4 | Gauge32 (0..4294967295) | RW | ||||||||||
column · Gauge32 (0..4294967295) · read-write · current The external route tag. | |||||||||||||
| CospfMultiProcessRedistributeFilterListName | 1.3.6.1.4.1.259.10.1.5.1.18.3.10.1.5 | DisplayString | RW | ||||||||||
column · DisplayString · read-write · current List name of access filter which use in other routing protocols. | |||||||||||||
| CospfMultiProcessRedistributeStatus | 1.3.6.1.4.1.259.10.1.5.1.18.3.10.1.6 | RowStatus | RC | ||||||||||
column · RowStatus · read-create · current The status of this conceptual row entry. This object is used to manage
the creation and deletion of conceptual rows.
Currently only support 4 status:
1. active 2. notInService 4. createAndGo 6. destroy
('active' and 'notInservice' status are used for getting action,
'createAndGo' and 'destroy' status are used for setting action.)
- 'active', which indicates that the current type of redistribute
- exists in the system.
- 'notInService', if not exist in the system.
- 'createAndGo', set this status to create a type of redistribute
- instance.
- 'destroy', to delete a type of redistribute instance. | |||||||||||||
| CospfMultiProcessRedistributeRoutemapName | 1.3.6.1.4.1.259.10.1.5.1.18.3.10.1.7 | DisplayString (SIZE (1..15)) | RW | ||||||||||
column · DisplayString (SIZE (1..15)) · read-write · current Name of the route map. | |||||||||||||
| TospfMultiProcessSummaryAddressTable | 1.3.6.1.4.1.259.10.1.5.1.18.3.11 | NA | |||||||||||
table · not-accessible · current The conceptual table of all of ospfSummaryAddressEntry. | |||||||||||||
| RospfMultiProcessSummaryAddressEntry | 1.3.6.1.4.1.259.10.1.5.1.18.3.11.1 | NA | |||||||||||
row · not-accessible · current The conceptual row for ospfSummaryAddressTable. | |||||||||||||
| CospfMultiProcessSummaryAddressType | 1.3.6.1.4.1.259.10.1.5.1.18.3.11.1.1 | InetAddressType | NA | ||||||||||
column · InetAddressType · not-accessible · current Summary address type. | |||||||||||||
| CospfMultiProcessSummaryAddress | 1.3.6.1.4.1.259.10.1.5.1.18.3.11.1.2 | InetAddress | NA | ||||||||||
column · InetAddress · not-accessible · current Summary address. | |||||||||||||
| CospfMultiProcessSummaryPfxLen | 1.3.6.1.4.1.259.10.1.5.1.18.3.11.1.3 | InetAddressPrefixLength | NA | ||||||||||
column · InetAddressPrefixLength · not-accessible · current Summary address prefix length. | |||||||||||||
| CospfMultiProcessSummaryStatus | 1.3.6.1.4.1.259.10.1.5.1.18.3.11.1.4 | RowStatus | RC | ||||||||||
column · RowStatus · read-create · current The status of this conceptual row entry. This object is used to manage
the creation and deletion of conceptual rows.
Currently only support 4 status:
1. active 2. notInService 4. createAndGo 6. destroy
('active' and 'notInservice' status are used for getting action,
'createAndGo' and 'destroy' status are used for setting action.)
- 'active', which indicates that the current summary address exists in
- the system.
- 'notInService', if not exist in the system.
- 'createAndGo', set this status to create a summary address.
- 'destroy', to delete a summary address. | |||||||||||||
| TospfMultiProcessNetworkAreaAddressTable | 1.3.6.1.4.1.259.10.1.5.1.18.3.12 | NA | |||||||||||
table · not-accessible · current The conceptual table of all of ospfNetworkAreaAddressEntry. | |||||||||||||
| RospfMultiProcessNetworkAreaAddressEntry | 1.3.6.1.4.1.259.10.1.5.1.18.3.12.1 | NA | |||||||||||
row · not-accessible · current The conceptual row for ospfNetworkAreaAddressTable. | |||||||||||||
| CospfMultiProcessNetworkAreaAddressType | 1.3.6.1.4.1.259.10.1.5.1.18.3.12.1.1 | InetAddressType | NA | ||||||||||
column · InetAddressType · not-accessible · current NetworkArea address type. | |||||||||||||
| CospfMultiProcessNetworkAreaAddress | 1.3.6.1.4.1.259.10.1.5.1.18.3.12.1.2 | InetAddress | NA | ||||||||||
column · InetAddress · not-accessible · current NetworkArea address. | |||||||||||||
| CospfMultiProcessNetworkAreaPfxLen | 1.3.6.1.4.1.259.10.1.5.1.18.3.12.1.3 | InetAddressPrefixLength | NA | ||||||||||
column · InetAddressPrefixLength · not-accessible · current NetworkArea prefix length. | |||||||||||||
| CospfMultiProcessNetworkAreaAreaId | 1.3.6.1.4.1.259.10.1.5.1.18.3.12.1.4 | Unsigned32 | RW | ||||||||||
column · Unsigned32 · read-write · current NetworkArea area ID. | |||||||||||||
| CospfMultiProcessNetworkAreaStatus | 1.3.6.1.4.1.259.10.1.5.1.18.3.12.1.5 | RowStatus | RC | ||||||||||
column · RowStatus · read-create · current The status of this conceptual row entry. This object is used to manage
the creation and deletion of conceptual rows.
Currently only support 4 status:
1. active 2. notInService 4. createAndGo 6. destroy
('active' and 'notInservice' status are used for getting action,
'createAndGo' and 'destroy' status are used for setting action.)
- 'active', which indicates that the current network exists in the
- system.
- 'notInService', if not exist in the system.
- 'createAndGo', set this status to create a network.
- 'destroy', to delete a network. | |||||||||||||
| CospfMultiProcessNetworkAreaAreaId2 | 1.3.6.1.4.1.259.10.1.5.1.18.3.12.1.6 | AreaID | RW | ||||||||||
column · AreaID · read-write · current NetworkArea area ID as IP address format. | |||||||||||||
| TospfMultiProcessIfTable | 1.3.6.1.4.1.259.10.1.5.1.18.3.14 | NA | |||||||||||
table · not-accessible · current The OSPF Interface Table describes the interfaces from the viewpoint of OSPF. | |||||||||||||
| RospfMultiProcessIfEntry | 1.3.6.1.4.1.259.10.1.5.1.18.3.14.1 | NA | |||||||||||
row · not-accessible · current The OSPF Interface Entry describes one interface from the viewpoint of OSPF. | |||||||||||||
| CospfMultiProcessIfIpAddressType | 1.3.6.1.4.1.259.10.1.5.1.18.3.14.1.1 | InetAddressType | NA | ||||||||||
column · InetAddressType · not-accessible · current The IP address type of this OSPF interface. | |||||||||||||
| CospfMultiProcessIfIpAddress | 1.3.6.1.4.1.259.10.1.5.1.18.3.14.1.2 | InetAddress | NA | ||||||||||
column · InetAddress · not-accessible · current The IP address of this OSPF interface. | |||||||||||||
| CospfMultiProcessIfCost | 1.3.6.1.4.1.259.10.1.5.1.18.3.14.1.3 | Integer32 (0..65535) | RW | ||||||||||
column · Integer32 (0..65535) · read-write · current The output cost of this OSPF interface.
Set 0 means unset the cost, thus the cost is dependent on
ospfMultiProcessAutoCost. | |||||||||||||
| CospfMultiProcessIfMtu | 1.3.6.1.4.1.259.10.1.5.1.18.3.14.1.4 | Integer32 (576..65535) | RW | ||||||||||
column · Integer32 (576..65535) · read-write · current The mtu of this OSPF interface. Set 0 to unset the mtu. | |||||||||||||
| CospfMultiProcessIfMtuIgnore | 1.3.6.1.4.1.259.10.1.5.1.18.3.14.1.5 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current If check(0), OSPF will check the MTU size during DD (Database Description) exchange. If ignore(1), OSPF will not check the MTU size during DD exchange.
| |||||||||||||
| CospfMultiProcessIfAreaId | 1.3.6.1.4.1.259.10.1.5.1.18.3.14.1.6 | AreaID | RO | ||||||||||
column · AreaID · read-only · current A 32-bit integer uniquely identifying the area to which the interface connects. Area ID 0.0.0.0 is used for the OSPF backbone. This is a private substitution for ospfIfAreaId of RFC1253. | |||||||||||||
| CospfMultiProcessIfRtrPriority | 1.3.6.1.4.1.259.10.1.5.1.18.3.14.1.7 | DesignatedRouterPriority (0..255) | RW | ||||||||||
column · DesignatedRouterPriority (0..255) · read-write · current The priority of this interface. Used in multi-access networks, this field is used in the designated router election algorithm. The value 0 signifies that the router is not eligible to become the designated router on this particular network. In the event of a tie in this value, routers will use their Router ID as a tie breaker. This is a private substitution for ospfIfRtrPriority of RFC1253. | |||||||||||||
| CospfMultiProcessIfTransitDelay | 1.3.6.1.4.1.259.10.1.5.1.18.3.14.1.8 | UpToMaxAge (1..65535) | RW | ||||||||||
column · UpToMaxAge (1..65535) · read-write · current The estimated number of seconds it takes to transmit a link state update packet over this interface. Note that the minimal value SHOULD be 1 second. This is a private substitution for ospfIfTransitDelay of RFC1253.
| |||||||||||||
| CospfMultiProcessIfRetransInterval | 1.3.6.1.4.1.259.10.1.5.1.18.3.14.1.9 | UpToMaxAge (1..65535) | RW | ||||||||||
column · UpToMaxAge (1..65535) · read-write · current The number of seconds between link state advertisement retransmissions, for adjacencies belonging to this interface. This value is also used when retransmitting database description and Link State request packets. Note that minimal value SHOULD be 1 second. This is a private substitution for ospfIfRetransInterval of RFC1253.
| |||||||||||||
| CospfMultiProcessIfHelloInterval | 1.3.6.1.4.1.259.10.1.5.1.18.3.14.1.10 | HelloRange (1..65535) | RW | ||||||||||
column · HelloRange (1..65535) · read-write · current The length of time, in seconds, between the Hello packets that the router sends on the interface. This value must be the same for all routers attached to a common network. This is a private substitution for ospfIfHelloInterval of RFC1253.
| |||||||||||||
| CospfMultiProcessIfRtrDeadInterval | 1.3.6.1.4.1.259.10.1.5.1.18.3.14.1.11 | PositiveInteger (1..65535) | RW | ||||||||||
column · PositiveInteger (1..65535) · read-write · current The number of seconds that a router's Hello packets have not been seen before its neighbors declare the router down. This should be some multiple of the Hello interval. This value must be the same for all routers attached to a common network. Note that 1..65535 is for 'set' range ; The read value may be (1...65535)*4 by default according to the Hello interval if this dead interval have not been set. This is a private substitution for ospfIfRtrDeadInterval of RFC1253.
| |||||||||||||
| CospfMultiProcessIfState | 1.3.6.1.4.1.259.10.1.5.1.18.3.14.1.12 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current The OSPF Interface State. This is a private substitution for ospfIfState of RFC1253.
| |||||||||||||
| CospfMultiProcessIfDesignatedRouter | 1.3.6.1.4.1.259.10.1.5.1.18.3.14.1.13 | IpAddress | RO | ||||||||||
column · IpAddress · read-only · current The IP address of the designated router. This is a private substitution for ospfIfDesignatedRouter of RFC1253. | |||||||||||||
| CospfMultiProcessIfBackupDesignatedRouter | 1.3.6.1.4.1.259.10.1.5.1.18.3.14.1.14 | IpAddress | RO | ||||||||||
column · IpAddress · read-only · current The IP address of the backup designated router. This is a private substitution for ospfIfBackupDesignatedRouter of RFC1253. | |||||||||||||
| CospfMultiProcessIfEvents | 1.3.6.1.4.1.259.10.1.5.1.18.3.14.1.15 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current The number of times this OSPF interface has changed its state or an error has occurred. Discontinuities in the value of this counter can occur at re-initialization of the management system. This is a private substitution for ospfIfEvents of RFC1253. | |||||||||||||
| CospfMultiProcessIfAuthKey | 1.3.6.1.4.1.259.10.1.5.1.18.3.14.1.16 | OCTET STRING (SIZE (0..8)) | RW | ||||||||||
column · OCTET STRING (SIZE (0..8)) · read-write · current The cleartext password used as an OSPF authentication key when simplePassword security is enabled. This object does not access any OSPF cryptogaphic (e.g., MD5) authentication key under any circumstance. If the key length is shorter than 8 octets, th agent will left adjust and zero fill to 8 octets. Unauthenticated interfaces need no authentication key, and simple password authentication cannot us a key of more than 8 octets. Note that the use of simplePassword authentication is NOT recommended when there is concern regarding attack upon the OSPF system. SimplePassword authentication is only sufficient to protect against accidental misconfigurations because it re-uses cleartext passwords [RFC1704]. When read, ospfIfAuthKey always returns an octet string of length zero. This is a private substitution for ospfIfAuthKey of RFC1253. | |||||||||||||
| CospfMultiProcessIfStatus | 1.3.6.1.4.1.259.10.1.5.1.18.3.14.1.17 | RowStatus | RO | ||||||||||
column · RowStatus · read-only · current This variable display the status of the ospf interface. Currently only active and notInService statues are supported. The value of this object has no effect on whether other objects in this conceptual row can be modified. This is a private substitution for ospfIfStatus of RFC1253. | |||||||||||||
| CospfMultiProcessIfAuthType | 1.3.6.1.4.1.259.10.1.5.1.18.3.14.1.18 | OspfAuthenticationType | RW | ||||||||||
column · OspfAuthenticationType · read-write · current The authentication type specified for an interface. Note that this object can be used to engage in significant attacks against an OSPF router. This is a private substitution for ospfIfAuthType of RFC1253. | |||||||||||||
| CospfMultiProcessIfDesignatedRouterId | 1.3.6.1.4.1.259.10.1.5.1.18.3.14.1.19 | RouterID | RO | ||||||||||
column · RouterID · read-only · current The Router ID of the designated router. This is a private substitution for ospfIfDesignatedRouterId of RFC4750. | |||||||||||||
| CospfMultiProcessIfBackupDesignatedRouterId | 1.3.6.1.4.1.259.10.1.5.1.18.3.14.1.20 | RouterID | RO | ||||||||||
column · RouterID · read-only · current The Router ID of the backup designated router. This is a private substitution for ospfIfBackupDesignatedRouterId of RFC4750. | |||||||||||||
| TospfMultiProcessAreaTable | 1.3.6.1.4.1.259.10.1.5.1.18.3.15 | NA | |||||||||||
table · not-accessible · current Information describing the configured parameters and cumulative statistics of the router's attached areas. The interfaces and virtual links are configured as part of these areas. Area 0.0.0.0, by definition, is the backbone area. This is a private substitution for ospfAreaTable of RFC1253. | |||||||||||||
| RospfMultiProcessAreaEntry | 1.3.6.1.4.1.259.10.1.5.1.18.3.15.1 | NA | |||||||||||
row · not-accessible · current Information describing the configured parameters and cumulative
statistics of one of the router's attached areas.
The interfaces and virtual links are configured as part of these
areas. Area 0.0.0.0, by definition, is the backbone area.
Information in this table is persistent and when this object is
written the entity SHOULD save the change to non-volatile storage. | |||||||||||||
| CospfMultiProcessAreaId | 1.3.6.1.4.1.259.10.1.5.1.18.3.15.1.1 | AreaID | NA | ||||||||||
column · AreaID · not-accessible · current A 32-bit integer uniquely identifying an area. | |||||||||||||
| CospfMultiProcessAuthType | 1.3.6.1.4.1.259.10.1.5.1.18.3.15.1.2 | OspfAuthenticationType | RC | obsolete | |||||||||
column · OspfAuthenticationType · read-create · obsolete The authentication type specified for an area. | |||||||||||||
| CospfMultiProcessImportAsExtern | 1.3.6.1.4.1.259.10.1.5.1.18.3.15.1.3 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current Indicates if an area is a stub area, NSSA, or standard area. Type-5 AS-external LSAs and type-11 Opaque LSAs are not imported into stub areas or NSSAs. NSSAs import AS-external data as type-7 LSAs.
| |||||||||||||
| CospfMultiProcessSpfRuns | 1.3.6.1.4.1.259.10.1.5.1.18.3.15.1.4 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current The number of times that the intra-area route table has been calculated using this area's link state database. This is typically done using Dijkstra's algorithm. Discontinuities in the value of this counter can occur at re-initialization of the management system. | |||||||||||||
| CospfMultiProcessAreaBdrRtrCount | 1.3.6.1.4.1.259.10.1.5.1.18.3.15.1.5 | Gauge32 | RO | ||||||||||
column · Gauge32 · read-only · current The total number of Area Border Routers reachable within this area. This is initially zero and is calculated in each Shortest Path First (SPF) pass. | |||||||||||||
| CospfMultiProcessAsBdrRtrCount | 1.3.6.1.4.1.259.10.1.5.1.18.3.15.1.6 | Gauge32 | RO | ||||||||||
column · Gauge32 · read-only · current The total number of Autonomous System Border Routers reachable within this area. This is initially zero and is calculated in each SPF pass. | |||||||||||||
| CospfMultiProcessAreaLsaCount | 1.3.6.1.4.1.259.10.1.5.1.18.3.15.1.7 | Gauge32 | RO | ||||||||||
column · Gauge32 · read-only · current The total number of link state advertisements in this area's link state database, excluding AS-external LSAs. | |||||||||||||
| CospfMultiProcessAreaLsaCksumSum | 1.3.6.1.4.1.259.10.1.5.1.18.3.15.1.8 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current The 32-bit sum of the link state advertisements' LS checksums contained in this area's link state database. This sum excludes external (LS type-5) link state advertisements. The sum can be used to determine if there has been a change in a router's link state database, and to compare the link state database of two routers. The value should be treated as unsigned when comparing two sums of checksums. | |||||||||||||
| CospfMultiProcessAreaSummary | 1.3.6.1.4.1.259.10.1.5.1.18.3.15.1.9 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current This variable controls the import of summary LSAs into stub and NSSA areas. It has no effect on other areas. If it is noAreaSummary, the router will not originate summary LSAs into the stub or NSSA area. It will rely entirely on its default route. If it is sendAreaSummary, the router will both summarize and propagate summary LSAs.
| |||||||||||||
| CospfMultiProcessAreaStatus | 1.3.6.1.4.1.259.10.1.5.1.18.3.15.1.10 | RowStatus | RO | ||||||||||
column · RowStatus · read-only · current Row status of area. Note ospf area can't be created or destroyed solely in this table. Only read is permitted. The value of this object has no effect on whether other objects in this conceptual row can be modified. | |||||||||||||
| TospfMultiProcessStubAreaTable | 1.3.6.1.4.1.259.10.1.5.1.18.3.16 | NA | |||||||||||
table · not-accessible · current The set of metrics that will be advertised by a default Area Border Router into a stub area. This is a private substitution for ospfStubAreaTable of RFC1253. | |||||||||||||
| RospfMultiProcessStubAreaEntry | 1.3.6.1.4.1.259.10.1.5.1.18.3.16.1 | NA | |||||||||||
row · not-accessible · current The metric for a given Type of Service that will be advertised by a default Area Border Router into a stub area. Information in this table is persistent and when this object is written the entity SHOULD save the change to non-volatile storage. | |||||||||||||
| CospfMultiProcessStubAreaId | 1.3.6.1.4.1.259.10.1.5.1.18.3.16.1.1 | AreaID | NA | ||||||||||
column · AreaID · not-accessible · current The 32-bit identifier for the stub area. On creation, this can be derived from the instance. | |||||||||||||
| CospfMultiProcessStubTOS | 1.3.6.1.4.1.259.10.1.5.1.18.3.16.1.2 | TOSType | NA | ||||||||||
column · TOSType · not-accessible · current The Type of Service associated with the metric. On creation, this can be derived from the instance. Currently only support TOS=0. | |||||||||||||
| CospfMultiProcessStubMetric | 1.3.6.1.4.1.259.10.1.5.1.18.3.16.1.3 | BigMetric (0..16777215) | RW | ||||||||||
column · BigMetric (0..16777215) · read-write · current The metric value applied at the indicated Type of Service. By default, this equals the least metric at the Type of Service among the interfaces to other areas. | |||||||||||||
| CospfMultiProcessStubStatus | 1.3.6.1.4.1.259.10.1.5.1.18.3.16.1.4 | RowStatus | RC | ||||||||||
column · RowStatus · read-create · current This object permits management of the table by facilitating actions such as row creation, construction, and destruction. Currently set only support 'createAndGo' and 'destroy'. The value of this object has no effect on whether other objects in this conceptual row can be modified. | |||||||||||||
| TospfMultiProcessLsdbTable | 1.3.6.1.4.1.259.10.1.5.1.18.3.17 | NA | |||||||||||
table · not-accessible · current The OSPF Process's link state database (LSDB). The LSDB contains the link state advertisements from throughout the areas that the device is attached to. This is a private substitution for ospfLsdbTable of RFC1253. | |||||||||||||
| RospfMultiProcessLsdbEntry | 1.3.6.1.4.1.259.10.1.5.1.18.3.17.1 | NA | |||||||||||
row · not-accessible · current A single link state advertisement. | |||||||||||||
| CospfMultiProcessLsdbAreaId | 1.3.6.1.4.1.259.10.1.5.1.18.3.17.1.1 | AreaID | NA | ||||||||||
column · AreaID · not-accessible · current The 32-bit identifier of the area from which the LSA was received. | |||||||||||||
| CospfMultiProcessLsdbType | 1.3.6.1.4.1.259.10.1.5.1.18.3.17.1.2 | INTEGER | NA | ||||||||||
column · INTEGER · not-accessible · current The type of the link state advertisement. Each link state type has a separate advertisement format. Note: External link state advertisements are permitted for backward compatibility, but should be displayed in the ospfMultiProcessExtLsdbTable rather than here.
| |||||||||||||
| CospfMultiProcessLsdbLsid | 1.3.6.1.4.1.259.10.1.5.1.18.3.17.1.3 | IpAddress | NA | ||||||||||
column · IpAddress · not-accessible · current The Link State ID is an LS Type Specific field containing either a Router ID or an IP address; It identifies the piece of the routing domain that is being described by the advertisement. | |||||||||||||
| CospfMultiProcessLsdbRouterId | 1.3.6.1.4.1.259.10.1.5.1.18.3.17.1.4 | RouterID | NA | ||||||||||
column · RouterID · not-accessible · current The 32-bit number that uniquely identifies the originating router in the Autonomous System. | |||||||||||||
| CospfMultiProcessLsdbSequence | 1.3.6.1.4.1.259.10.1.5.1.18.3.17.1.5 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current The sequence number field is a signed 32-bit integer. It starts with the value '80000001'h, or -'7FFFFFFF'h, and increments until '7FFFFFFF'h. Thus, a typical sequence number will be very negative. It is used to detect old and duplicate Link State Advertisements. The space of sequence numbers is linearly ordered. The larger the sequence number, the more recent the advertisement. | |||||||||||||
| CospfMultiProcessLsdbAge | 1.3.6.1.4.1.259.10.1.5.1.18.3.17.1.6 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current This field is the age of the link state advertisement in seconds.
| |||||||||||||
| CospfMultiProcessLsdbChecksum | 1.3.6.1.4.1.259.10.1.5.1.18.3.17.1.7 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current This field is the checksum of the complete contents of the advertisement, excepting the age field. The age field is excepted so that an advertisement's age can be incremented without updating the checksum. The checksum used is the same that is used for ISO connectionless datagrams; it is commonly referred to as the Fletcher checksum. | |||||||||||||
| CospfMultiProcessLsdbAdvertisement | 1.3.6.1.4.1.259.10.1.5.1.18.3.17.1.8 | OCTET STRING (SIZE (1..65535)) | RO | ||||||||||
column · OCTET STRING (SIZE (1..65535)) · read-only · current The entire link state advertisement, including its header. Note that for variable length LSAs, SNMP agents may not be able to return the largest string size. | |||||||||||||
| TospfMultiProcessVirtIfTable | 1.3.6.1.4.1.259.10.1.5.1.18.3.20 | NA | |||||||||||
table · not-accessible · current Information about this router's virtual interfaces that the OSPF Process is configured to carry on. This is a private substitution for ospfVirtIfTable of RFC1253. | |||||||||||||
| RospfMultiProcessVirtIfEntry | 1.3.6.1.4.1.259.10.1.5.1.18.3.20.1 | NA | |||||||||||
row · not-accessible · current Information about a single virtual interface. Information in this table is persistent and when this object is written the entity SHOULD save the change to non-volatile storage. | |||||||||||||
| CospfMultiProcessVirtIfAreaId | 1.3.6.1.4.1.259.10.1.5.1.18.3.20.1.1 | AreaID | NA | ||||||||||
column · AreaID · not-accessible · current The transit area that the virtual link traverses. By definition, this is not 0.0.0.0. | |||||||||||||
| CospfMultiProcessVirtIfNeighbor | 1.3.6.1.4.1.259.10.1.5.1.18.3.20.1.2 | RouterID | NA | ||||||||||
column · RouterID · not-accessible · current The Router ID of the virtual neighbor. | |||||||||||||
| CospfMultiProcessVirtIfTransitDelay | 1.3.6.1.4.1.259.10.1.5.1.18.3.20.1.3 | UpToMaxAge (1..65535) | RW | ||||||||||
column · UpToMaxAge (1..65535) · read-write · current The estimated number of seconds it takes to transmit a Link State update packet over this interface. Note that the minimal value SHOULD be 1 second.
| |||||||||||||
| CospfMultiProcessVirtIfRetransInterval | 1.3.6.1.4.1.259.10.1.5.1.18.3.20.1.4 | UpToMaxAge (1..65535) | RW | ||||||||||
column · UpToMaxAge (1..65535) · read-write · current The number of seconds between link state avertisement retransmissions, for adjacencies belonging to this interface. This value is also used when retransmitting database description and Link State request packets. This value should be well over the expected round-trip time. Note that the minimal value SHOULD be 1 second.
| |||||||||||||
| CospfMultiProcessVirtIfHelloInterval | 1.3.6.1.4.1.259.10.1.5.1.18.3.20.1.5 | HelloRange (1..65535) | RW | ||||||||||
column · HelloRange (1..65535) · read-write · current The length of time, in seconds, between the Hello packets that the router sends on the interface. This value must be the same for the virtual neighbor.
| |||||||||||||
| CospfMultiProcessVirtIfRtrDeadInterval | 1.3.6.1.4.1.259.10.1.5.1.18.3.20.1.6 | PositiveInteger (1..65535) | RW | ||||||||||
column · PositiveInteger (1..65535) · read-write · current The number of seconds that a router's Hello packets have not been seen before its neighbors declare the router down. This should be 4 multiple of the Hello interval. This value must be the same for the virtual neighbor. Note that 1..65535 is for 'set' range ; The read value may be (1...65535)*4 by default according to the Hello interval if this dead interval haven't been set.
| |||||||||||||
| CospfMultiProcessVirtIfState | 1.3.6.1.4.1.259.10.1.5.1.18.3.20.1.7 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current OSPF virtual interface states.
| |||||||||||||
| CospfMultiProcessVirtIfEvents | 1.3.6.1.4.1.259.10.1.5.1.18.3.20.1.8 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current The number of state changes or error events on this virtual link. Discontinuities in the value of this counter can occur at re-initialization of the management system. | |||||||||||||
| CospfMultiProcessVirtIfAuthKey | 1.3.6.1.4.1.259.10.1.5.1.18.3.20.1.9 | OCTET STRING (SIZE (0..8)) | RW | ||||||||||
column · OCTET STRING (SIZE (0..8)) · read-write · current The cleartext password used as an OSPF authentication key when simplePassword security is enabled. This object does not access any OSPF cryptogaphic (e.g., MD5) authentication key under any circumstance. If the key length is shorter than 8 octets, the agent will left adjust and zero fill to 8 octets. Unauthenticated interfaces need no authentication key, and simple password authentication cannot use a key of more than 8 octets. Note that the use of simplePassword authentication is NOT recommended when there is concern regarding attack upon the OSPF system. SimplePassword authentication is only sufficient to protect against accidental misconfigurations because it re-uses cleartext passwords. [RFC1704] When read, ospfVirtIfAuthKey always returns an octet string of length zero. | |||||||||||||
| CospfMultiProcessVirtIfStatus | 1.3.6.1.4.1.259.10.1.5.1.18.3.20.1.10 | RowStatus | RC | ||||||||||
column · RowStatus · read-create · current This object permits management of the table by facilitating actions such as row creation, construction, and destruction. The value of this object has no effect on whether other objects in this conceptual row can be modified. | |||||||||||||
| CospfMultiProcessVirtIfAuthType | 1.3.6.1.4.1.259.10.1.5.1.18.3.20.1.11 | OspfAuthenticationType | RW | ||||||||||
column · OspfAuthenticationType · read-write · current The authentication type specified for a virtual interface. Note that this object can be used to engage in significant attacks against an OSPF router. | |||||||||||||
| TospfMultiProcessNbrTable | 1.3.6.1.4.1.259.10.1.5.1.18.3.21 | NA | |||||||||||
table · not-accessible · current A table describing all non-virtual neighbors in the locality of the OSPF router. This is a private substitution for ospfNbrTable of RFC1253. | |||||||||||||
| RospfMultiProcessNbrEntry | 1.3.6.1.4.1.259.10.1.5.1.18.3.21.1 | NA | |||||||||||
row · not-accessible · current The information regarding a single neighbor. | |||||||||||||
| CospfMultiProcessNbrIpAddr | 1.3.6.1.4.1.259.10.1.5.1.18.3.21.1.1 | IpAddress | NA | ||||||||||
column · IpAddress · not-accessible · current The IP address this neighbor is using in its IP source address. | |||||||||||||
| CospfMultiProcessNbrRtrId | 1.3.6.1.4.1.259.10.1.5.1.18.3.21.1.2 | RouterID | NA | ||||||||||
column · RouterID · not-accessible · current A 32-bit integer (represented as a type IpAddress) uniquely identifying the neighboring router in the Autonomous System. | |||||||||||||
| CospfMultiProcessNbrOptions | 1.3.6.1.4.1.259.10.1.5.1.18.3.21.1.3 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current A bit mask corresponding to the neighbor's options field.
Bit 0, if set, indicates that the system will operate on Type of
Service metrics other than TOS 0. If zero, the neighbor will ignore
all metrics except the TOS 0 metric.
Bit 1, if set, indicates that the associated area accepts and operates
on external information; if zero, it is a stub area.
Bit 2, if set, indicates that the system is capable of routing IP
multicast datagrams, that is that it implements the multicast
extensions to OSPF.
Bit 3, if set, indicates that the associated area is an NSSA. These
areas are capable of carrying type-7 external advertisements, which
are translated into type-5 external advertisements at NSSA borders. | |||||||||||||
| CospfMultiProcessNbrPriority | 1.3.6.1.4.1.259.10.1.5.1.18.3.21.1.4 | DesignatedRouterPriority | RO | ||||||||||
column · DesignatedRouterPriority · read-only · current The priority of this neighbor in the designated router election algorithm. The value 0 signifies that the neighbor is not eligible to become the designated router on this particular network. | |||||||||||||
| CospfMultiProcessNbrState | 1.3.6.1.4.1.259.10.1.5.1.18.3.21.1.5 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current The state of the relationship with this neighbor.
| |||||||||||||
| CospfMultiProcessNbrEvents | 1.3.6.1.4.1.259.10.1.5.1.18.3.21.1.6 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current The number of times this neighbor relationship has changed state or an error has occurred. Discontinuities in the value of this counter can occur at re-initialization of the management system. | |||||||||||||
| CospfMultiProcessNbrLsRetransQLen | 1.3.6.1.4.1.259.10.1.5.1.18.3.21.1.7 | Gauge32 | RO | ||||||||||
column · Gauge32 · read-only · current The current length of the retransmission queue. | |||||||||||||
| TospfMultiProcessVirtNbrTable | 1.3.6.1.4.1.259.10.1.5.1.18.3.22 | NA | |||||||||||
table · not-accessible · current This table describes all virtual neighbors. Since virtual links are configured in the Virtual Interface Table, this table is read-only. This is a private substitution for ospfVirtNbrTable of RFC1253. | |||||||||||||
| RospfMultiProcessVirtNbrEntry | 1.3.6.1.4.1.259.10.1.5.1.18.3.22.1 | NA | |||||||||||
row · not-accessible · current Virtual neighbor information. | |||||||||||||
| CospfMultiProcessVirtNbrArea | 1.3.6.1.4.1.259.10.1.5.1.18.3.22.1.1 | AreaID | NA | ||||||||||
column · AreaID · not-accessible · current The Transit Area Identifier. | |||||||||||||
| CospfMultiProcessVirtNbrRtrId | 1.3.6.1.4.1.259.10.1.5.1.18.3.22.1.2 | RouterID | NA | ||||||||||
column · RouterID · not-accessible · current A 32-bit integer uniquely identifying the neighboring router in the Autonomous System. | |||||||||||||
| CospfMultiProcessVirtNbrIpAddr | 1.3.6.1.4.1.259.10.1.5.1.18.3.22.1.3 | IpAddress | RO | ||||||||||
column · IpAddress · read-only · current The IP address this virtual neighbor is using. | |||||||||||||
| CospfMultiProcessVirtNbrOptions | 1.3.6.1.4.1.259.10.1.5.1.18.3.22.1.4 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current A bit mask corresponding to the neighbor's options field. Bit 1, if set, indicates that the system will operate on Type of Service metrics other than TOS 0. If zero, the neighbor will ignore all metrics except the TOS 0 metric. Bit 2, if set, indicates that the system is network multicast capable, i.e., that it implements OSPF multicast routing. | |||||||||||||
| CospfMultiProcessVirtNbrState | 1.3.6.1.4.1.259.10.1.5.1.18.3.22.1.5 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current The state of the virtual neighbor relationship.
| |||||||||||||
| CospfMultiProcessVirtNbrEvents | 1.3.6.1.4.1.259.10.1.5.1.18.3.22.1.6 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current The number of times this virtual link has changed its state or an error has occurred. Discontinuities in the value of this counter can occur at re-initialization of the management system. | |||||||||||||
| CospfMultiProcessVirtNbrLsRetransQLen | 1.3.6.1.4.1.259.10.1.5.1.18.3.22.1.7 | Gauge32 | RO | ||||||||||
column · Gauge32 · read-only · current The current length of the retransmission queue. | |||||||||||||
| TospfMultiProcessExtLsdbTable | 1.3.6.1.4.1.259.10.1.5.1.18.3.23 | NA | |||||||||||
table · not-accessible · current The OSPF Process's external LSA link state database. This table is identical to the OSPF LSDB Table in format, but contains only external link state advertisements. The purpose is to allow external LSAs to be displayed once for the router rather than once in each non-stub area. Note that external LSAs are also in the AS-scope link state database. This is a private substitution for ospfExtLsdbTable of RFC1253. | |||||||||||||
| RospfMultiProcessExtLsdbEntry | 1.3.6.1.4.1.259.10.1.5.1.18.3.23.1 | NA | |||||||||||
row · not-accessible · current A single link state advertisement. | |||||||||||||
| CospfMultiProcessExtLsdbType | 1.3.6.1.4.1.259.10.1.5.1.18.3.23.1.1 | INTEGER | NA | ||||||||||
column · INTEGER · not-accessible · current The type of the link state advertisement. Each link state type has a separate advertisement format.
| |||||||||||||
| CospfMultiProcessExtLsdbLsid | 1.3.6.1.4.1.259.10.1.5.1.18.3.23.1.2 | IpAddress | NA | ||||||||||
column · IpAddress · not-accessible · current The Link State ID is an LS Type Specific field containing either a Router ID or an IP address; it identifies the piece of the routing domain that is being described by the advertisement. | |||||||||||||
| CospfMultiProcessExtLsdbRouterId | 1.3.6.1.4.1.259.10.1.5.1.18.3.23.1.3 | RouterID | NA | ||||||||||
column · RouterID · not-accessible · current The 32-bit number that uniquely identifies the originating router in the Autonomous System. | |||||||||||||
| CospfMultiProcessExtLsdbSequence | 1.3.6.1.4.1.259.10.1.5.1.18.3.23.1.4 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current The sequence number field is a signed 32-bit integer. It starts with the value '80000001'h, or -'7FFFFFFF'h, and increments until '7FFFFFFF'h. Thus, a typical sequence number will be very negative. It is used to detect old and duplicate link state advertisements. The space of sequence numbers is linearly ordered. The larger the sequence number, the more recent the advertisement. | |||||||||||||
| CospfMultiProcessExtLsdbAge | 1.3.6.1.4.1.259.10.1.5.1.18.3.23.1.5 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current This field is the age of the link state advertisement in seconds.
| |||||||||||||
| CospfMultiProcessExtLsdbChecksum | 1.3.6.1.4.1.259.10.1.5.1.18.3.23.1.6 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current This field is the checksum of the complete contents of the advertisement, excepting the age field. The age field is excepted so that an advertisement's age can be incremented without updating the checksum. The checksum used is the same that is used for ISO connectionless datagrams; it is commonly referred to as the Fletcher checksum. | |||||||||||||
| CospfMultiProcessExtLsdbAdvertisement | 1.3.6.1.4.1.259.10.1.5.1.18.3.23.1.7 | OCTET STRING (SIZE (36)) | RO | ||||||||||
column · OCTET STRING (SIZE (36)) · read-only · current The entire link state advertisement, including its header. | |||||||||||||
| TospfMultiProcessAreaAggregateTable | 1.3.6.1.4.1.259.10.1.5.1.18.3.24 | NA | |||||||||||
table · not-accessible · current The Area Aggregate Table acts as an adjunct to the Area Table. It describes those address aggregates that are configured to be propagated from an area. Its purpose is to reduce the amount of information that is known beyond an Area's borders. It contains a set of IP address ranges specified by an IP address/IP network mask pair. For example, a class B address range of X.X.X.X with a network mask of 255.255.0.0 includes all IP addresses from X.X.0.0 to X.X.255.255. Note that if ranges are configured such that one range subsumes another range (e.g., 10.0.0.0 mask 255.0.0.0 and 10.1.0.0 mask 255.255.0.0), the most specific match is the preferred one. This is a private substitution for ospfAreaAggregateTable of RFC1253. | |||||||||||||
| RospfMultiProcessAreaAggregateEntry | 1.3.6.1.4.1.259.10.1.5.1.18.3.24.1 | NA | |||||||||||
row · not-accessible · current A single area aggregate entry. Information in this table is persistent and when this object is written the entity SHOULD save the change to non-volatile storage. | |||||||||||||
| CospfMultiProcessAreaAggregateAreaID | 1.3.6.1.4.1.259.10.1.5.1.18.3.24.1.1 | AreaID | NA | ||||||||||
column · AreaID · not-accessible · current The area within which the address aggregate is to be found. | |||||||||||||
| CospfMultiProcessAreaAggregateLsdbType | 1.3.6.1.4.1.259.10.1.5.1.18.3.24.1.2 | INTEGER | NA | ||||||||||
column · INTEGER · not-accessible · current The type of the address aggregate. This field specifies the Lsdb type that this address aggregate applies to.
| |||||||||||||
| CospfMultiProcessAreaAggregateNet | 1.3.6.1.4.1.259.10.1.5.1.18.3.24.1.3 | IpAddress | NA | ||||||||||
column · IpAddress · not-accessible · current The IP address of the net or subnet indicated by the range. | |||||||||||||
| CospfMultiProcessAreaAggregateMask | 1.3.6.1.4.1.259.10.1.5.1.18.3.24.1.4 | IpAddress | NA | ||||||||||
column · IpAddress · not-accessible · current The subnet mask that pertains to the net or subnet. | |||||||||||||
| CospfMultiProcessAreaAggregateStatus | 1.3.6.1.4.1.259.10.1.5.1.18.3.24.1.5 | RowStatus | RC | ||||||||||
column · RowStatus · read-create · current This object permits management of the table by facilitating actions such as row creation, construction, and destruction. The value of this object has no effect on whether other objects in this conceptual row can be modified. | |||||||||||||
| CospfMultiProcessAreaAggregateEffect | 1.3.6.1.4.1.259.10.1.5.1.18.3.24.1.6 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Subnets subsumed by ranges either trigger the advertisement of the indicated aggregate (advertiseMatching) or result in the subnet's not being advertised at all outside the area.
| |||||||||||||
| TospfMultiProcessIfAuthMd5Table | 1.3.6.1.4.1.259.10.1.5.1.18.3.27 | NA | |||||||||||
table · not-accessible · current The OSPF Interface Message Digest Authentication Table describes the interfaces from the viewpoint of OSPF. | |||||||||||||
| RospfMultiProcessIfAuthMd5Entry | 1.3.6.1.4.1.259.10.1.5.1.18.3.27.1 | NA | |||||||||||
row · not-accessible · current The OSPF Interface Message Digest Authentication Entry describes one interface from the viewpoint of OSPF. | |||||||||||||
| CospfMultiProcessIfAuthMd5IpAddressType | 1.3.6.1.4.1.259.10.1.5.1.18.3.27.1.1 | InetAddressType | NA | ||||||||||
column · InetAddressType · not-accessible · current The IP address type of this OSPF interface. | |||||||||||||
| CospfMultiProcessIfAuthMd5IpAddress | 1.3.6.1.4.1.259.10.1.5.1.18.3.27.1.2 | InetAddress | NA | ||||||||||
column · InetAddress · not-accessible · current The IP address of this OSPF interface. | |||||||||||||
| CospfMultiProcessIfAuthMd5KeyId | 1.3.6.1.4.1.259.10.1.5.1.18.3.27.1.3 | Integer32 (1..255) | NA | ||||||||||
column · Integer32 (1..255) · not-accessible · current The Message Digest Authentication key ID of this OSPF interface. | |||||||||||||
| CospfMultiProcessIfAuthMd5Key | 1.3.6.1.4.1.259.10.1.5.1.18.3.27.1.4 | OCTET STRING (SIZE (0..16)) | RW | ||||||||||
column · OCTET STRING (SIZE (0..16)) · read-write · current The Message Digest Authentication key of this OSPF interface. When read, ospfIfAuthMd5Key always returns an octet string of length zero. Set zero-length string to unset the md5 key. | |||||||||||||
| TospfMultiProcessVirtIfAuthMd5Table | 1.3.6.1.4.1.259.10.1.5.1.18.3.28 | NA | |||||||||||
table · not-accessible · current The OSPF Virtual Interface Message Digest Authentication Table describes the interfaces from the viewpoint of OSPF. | |||||||||||||
| RospfMultiProcessVirtIfAuthMd5Entry | 1.3.6.1.4.1.259.10.1.5.1.18.3.28.1 | NA | |||||||||||
row · not-accessible · current The OSPF Virtual Interface Message Digest Authentication Entry describes one interface from the viewpoint of OSPF. | |||||||||||||
| CospfMultiProcessVirtIfAuthMd5AreaId | 1.3.6.1.4.1.259.10.1.5.1.18.3.28.1.1 | AreaID | NA | ||||||||||
column · AreaID · not-accessible · current The transit area that the virtual link traverses. By definition, this is not 0.0.0.0. | |||||||||||||
| CospfMultiProcessVirtIfAuthMd5Neighbor | 1.3.6.1.4.1.259.10.1.5.1.18.3.28.1.2 | RouterID | NA | ||||||||||
column · RouterID · not-accessible · current The Router ID of the virtual neighbor. | |||||||||||||
| CospfMultiProcessVirtIfAuthMd5KeyId | 1.3.6.1.4.1.259.10.1.5.1.18.3.28.1.3 | Integer32 (1..255) | NA | ||||||||||
column · Integer32 (1..255) · not-accessible · current The Message Digest Authentication key ID of this OSPF virtual interface. | |||||||||||||
| CospfMultiProcessVirtIfAuthMd5Key | 1.3.6.1.4.1.259.10.1.5.1.18.3.28.1.4 | OCTET STRING (SIZE (0..16)) | RW | ||||||||||
column · OCTET STRING (SIZE (0..16)) · read-write · current The Message Digest Authentication key of this OSPF virtual interface. When read, ospfVirtIfAuthMd5Key always returns an octet string of length zero. Set zero-length string to unset the md5 key. | |||||||||||||
| TospfMultiProcessRouteTable | 1.3.6.1.4.1.259.10.1.5.1.18.3.31 | NA | |||||||||||
table · not-accessible · current A conceptual table for ospfRouteEntry. | |||||||||||||
| RospfMultiProcessRouteEntry | 1.3.6.1.4.1.259.10.1.5.1.18.3.31.1 | NA | |||||||||||
row · not-accessible · current A conceptually row for ospfRouteTable. | |||||||||||||
| CospfMultiProcessRouteDest | 1.3.6.1.4.1.259.10.1.5.1.18.3.31.1.1 | IpAddress | NA | ||||||||||
column · IpAddress · not-accessible · current The destination IP address of this route. | |||||||||||||
| CospfMultiProcessRoutePfxLen | 1.3.6.1.4.1.259.10.1.5.1.18.3.31.1.2 | Integer32 | NA | ||||||||||
column · Integer32 · not-accessible · current The prefix length of this route. | |||||||||||||
| CospfMultiProcessRouteNexthop | 1.3.6.1.4.1.259.10.1.5.1.18.3.31.1.3 | IpAddress | NA | ||||||||||
column · IpAddress · not-accessible · current The nexthop IP address of this route. Note that, discard and directly connected routes have no nexthops. They are displayed as 0.0.0.0. | |||||||||||||
| CospfMultiProcessRouteInterface | 1.3.6.1.4.1.259.10.1.5.1.18.3.31.1.4 | DisplayString | RO | ||||||||||
column · DisplayString · read-only · current The name of outgoing interface which links to nexthop. Return an octet string of length zero when it is discard route. | |||||||||||||
| CospfMultiProcessRouteCost | 1.3.6.1.4.1.259.10.1.5.1.18.3.31.1.5 | Unsigned32 | RO | ||||||||||
column · Unsigned32 · read-only · current The cost of this route. Always return 4294967295 if it is a discard route. | |||||||||||||
| CospfMultiProcessRoutePathType | 1.3.6.1.4.1.259.10.1.5.1.18.3.31.1.6 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current The path type of this route. unknown, unknown path type. connected, directly connected. discard, discard route. intra, intra-area route. inter, inter-area route. type1, external type 1 route. type2, external type 2 route. nssa1, nssa external type 1 route. nssa2, nssa external type 2 route.
| |||||||||||||
| CospfMultiProcessRouteAreaId | 1.3.6.1.4.1.259.10.1.5.1.18.3.31.1.7 | IpAddress | RO | ||||||||||
column · IpAddress · read-only · current Area ID of the path which links to nexthop. Note that, discard and external routes have no area option for the path. Always return 0.0.0.0. | |||||||||||||
| CospfMultiProcessRouteTransitArea | 1.3.6.1.4.1.259.10.1.5.1.18.3.31.1.8 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current To display if the area is a transit area or not for the path. Note that, discard and external routes have no area option for the path. Always return normalArea(2).
| |||||||||||||
| TospfIfParamTable | 1.3.6.1.4.1.259.10.1.5.1.18.3.37 | NA | |||||||||||
table · not-accessible · current The TOS metrics for a non-virtual interface identified by the interface index. | |||||||||||||
| RospfIfParamEntry | 1.3.6.1.4.1.259.10.1.5.1.18.3.37.1 | NA | |||||||||||
row · not-accessible · current A particular TOS metric for a non-virtual in- terface identified by the interface index. | |||||||||||||
| CospfIfParamIfindex | 1.3.6.1.4.1.259.10.1.5.1.18.3.37.1.1 | Integer32 | NA | ||||||||||
column · Integer32 · not-accessible · current The Ifindex of this OSPF interface. On row creation, this can be derived from the instance. | |||||||||||||
| CospfIfParamIpAddress | 1.3.6.1.4.1.259.10.1.5.1.18.3.37.1.2 | IpAddress | NA | ||||||||||
column · IpAddress · not-accessible · current The IP address of this OSPF interface. On row creation, this can be derived from the in- stance. | |||||||||||||
| CospfIfParamTOS | 1.3.6.1.4.1.259.10.1.5.1.18.3.37.1.3 | TOSType | NA | ||||||||||
column · TOSType · not-accessible · current The type of service metric being referenced. On row creation, this can be derived from the instance. | |||||||||||||
| CospfIfParamCost | 1.3.6.1.4.1.259.10.1.5.1.18.3.37.1.4 | Metric | RW | ||||||||||
column · Metric · read-write · current The metric of using this type of service on this interface. The default value of the TOS 0 Metric is 10^8 / ifSpeed. | |||||||||||||
| CospfIfParamStatus | 1.3.6.1.4.1.259.10.1.5.1.18.3.37.1.5 | ValidStatus | RC | ||||||||||
column · ValidStatus · read-create · current Writing this to valid(1) creates an entry. Writing this to invalid(2) destroys an entry. | |||||||||||||
| NrouteMgt | 1.3.6.1.4.1.259.10.1.5.1.18.5 | ||||||||||||
| SrouteMultipath | 1.3.6.1.4.1.259.10.1.5.1.18.5.3 | Integer32 (1..8) | RW | ||||||||||
scalar · Integer32 (1..8) · read-write · current This object is the multipath numbers installed to FIB. The default value is 4. | |||||||||||||
| NsysLogMgt | 1.3.6.1.4.1.259.10.1.5.1.19 | ||||||||||||
| SsysLogStatus | 1.3.6.1.4.1.259.10.1.5.1.19.1 | EnabledStatus | RW | ||||||||||
scalar · EnabledStatus · read-write · current Whether the system log is enabled. | |||||||||||||
| SsysLogHistoryFlashLevel | 1.3.6.1.4.1.259.10.1.5.1.19.2 | Integer32 (0..7) | RW | ||||||||||
scalar · Integer32 (0..7) · read-write · current Severity level for logging to flash. | |||||||||||||
| SsysLogHistoryRamLevel | 1.3.6.1.4.1.259.10.1.5.1.19.3 | Integer32 (0..7) | RW | ||||||||||
scalar · Integer32 (0..7) · read-write · current Severity level for logging to RAM. | |||||||||||||
| NremoteLogMgt | 1.3.6.1.4.1.259.10.1.5.1.19.6 | ||||||||||||
| SremoteLogStatus | 1.3.6.1.4.1.259.10.1.5.1.19.6.1 | EnabledStatus | RW | ||||||||||
scalar · EnabledStatus · read-write · current Whether the remote log system is enabled. | |||||||||||||
| SremoteLogLevel | 1.3.6.1.4.1.259.10.1.5.1.19.6.2 | Integer32 (0..7) | RW | ||||||||||
scalar · Integer32 (0..7) · read-write · current Severity level for remote log. | |||||||||||||
| SremoteLogFacilityType | 1.3.6.1.4.1.259.10.1.5.1.19.6.3 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current The facility type for remote log.
| |||||||||||||
| TremoteLogServerInetTable | 1.3.6.1.4.1.259.10.1.5.1.19.6.7 | NA | |||||||||||
table · not-accessible · current A table for storing the remote log server list. | |||||||||||||
| RremoteLogServerInetEntry | 1.3.6.1.4.1.259.10.1.5.1.19.6.7.1 | NA | |||||||||||
row · not-accessible · current A conceptual row for remoteLogServerInetTable. | |||||||||||||
| CremoteLogServerInetAddressType | 1.3.6.1.4.1.259.10.1.5.1.19.6.7.1.1 | InetAddressType | NA | ||||||||||
column · InetAddressType · not-accessible · current Indicates the type of address denoted in remoteLogServerInetAddress type. Only ipv4(1), ipv6(2) and ipv6z(4) types are supported. | |||||||||||||
| CremoteLogServerInetAddress | 1.3.6.1.4.1.259.10.1.5.1.19.6.7.1.2 | InetAddress | NA | ||||||||||
column · InetAddress · not-accessible · current The IP address of the remote log Server. | |||||||||||||
| CremoteLogServerStatus | 1.3.6.1.4.1.259.10.1.5.1.19.6.7.1.3 | ValidStatus | RC | ||||||||||
column · ValidStatus · read-create · current Setting this to valid(1) creates an entry. Setting this to invalid(2) destroys an entry. | |||||||||||||
| NsmtpMgt | 1.3.6.1.4.1.259.10.1.5.1.19.7 | ||||||||||||
| SsmtpStatus | 1.3.6.1.4.1.259.10.1.5.1.19.7.1 | EnabledStatus | RW | ||||||||||
scalar · EnabledStatus · read-write · current Set enabled(1) to enable the SMTP, set disabled(2) to disable the SMTP. | |||||||||||||
| SsmtpSeverityLevel | 1.3.6.1.4.1.259.10.1.5.1.19.7.2 | Integer32 (0..7) | RW | ||||||||||
scalar · Integer32 (0..7) · read-write · current Specify the SMTP minimum severity level to send the event message. | |||||||||||||
| SsmtpSourceEMail | 1.3.6.1.4.1.259.10.1.5.1.19.7.3 | DisplayString (SIZE (0..41)) | RW | ||||||||||
scalar · DisplayString (SIZE (0..41)) · read-write · current SMTP source email address, the sender's mail address that appears in the 'From' field of the mail. | |||||||||||||
| TsmtpServerIpTable | 1.3.6.1.4.1.259.10.1.5.1.19.7.4 | NA | |||||||||||
table · not-accessible · current The SMTP server IP table. The maximum servers to be added is 3. | |||||||||||||
| RsmtpServerIpEntry | 1.3.6.1.4.1.259.10.1.5.1.19.7.4.1 | NA | |||||||||||
| CsmtpServerIp | 1.3.6.1.4.1.259.10.1.5.1.19.7.4.1.1 | IpAddress | AN | ||||||||||
column · IpAddress · accessible-for-notify · current SMTP mail server's IP address. | |||||||||||||
| CsmtpServerIpStatus | 1.3.6.1.4.1.259.10.1.5.1.19.7.4.1.2 | ValidStatus | RC | ||||||||||
column · ValidStatus · read-create · current Setting this to valid(1) creates an entry. Setting this to invalid(2) destroys an entry. | |||||||||||||
| TsmtpDestEMailTable | 1.3.6.1.4.1.259.10.1.5.1.19.7.5 | NA | |||||||||||
table · not-accessible · current The table of the destination e-mail address. The maximum numbers of destination email address to be added is 5. | |||||||||||||
| RsmtpDestEMailEntry | 1.3.6.1.4.1.259.10.1.5.1.19.7.5.1 | NA | |||||||||||
| CsmtpDestEMail | 1.3.6.1.4.1.259.10.1.5.1.19.7.5.1.1 | DisplayString (SIZE (0..41)) | NA | ||||||||||
column · DisplayString (SIZE (0..41)) · not-accessible · current SMTP destination e-mail address. | |||||||||||||
| CsmtpDestEMailStatus | 1.3.6.1.4.1.259.10.1.5.1.19.7.5.1.2 | ValidStatus | RC | ||||||||||
column · ValidStatus · read-create · current Setting this to valid(1) creates an entry. Setting this to invalid(2) destroys an entry. | |||||||||||||
| NlineMgt | 1.3.6.1.4.1.259.10.1.5.1.20 | ||||||||||||
| NconsoleMgt | 1.3.6.1.4.1.259.10.1.5.1.20.1 | ||||||||||||
| SconsoleDataBits | 1.3.6.1.4.1.259.10.1.5.1.20.1.1 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Number of data bits.
| |||||||||||||
| SconsoleParity | 1.3.6.1.4.1.259.10.1.5.1.20.1.2 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Defines the generation of a parity bit.
| |||||||||||||
| SconsoleBaudRate | 1.3.6.1.4.1.259.10.1.5.1.20.1.3 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Baud rate: Valid values are 115200, 57600, 38400, 19200, and 9600.
| |||||||||||||
| SconsoleStopBits | 1.3.6.1.4.1.259.10.1.5.1.20.1.4 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current The console stop bits, valid values are stopbits1(1) or stopbits2(2)
| |||||||||||||
| SconsoleExecTimeout | 1.3.6.1.4.1.259.10.1.5.1.20.1.5 | Integer32 (0..65535) | RW | ||||||||||
scalar · Integer32 (0..65535) · read-write · current In a serial console, use the consoleExecTimeout variable to set the interval that the EXEC command interpreter waits until user input is detected; set the value to 0 to disable it. | |||||||||||||
| SconsolePasswordThreshold | 1.3.6.1.4.1.259.10.1.5.1.20.1.6 | Integer32 (0..120) | RW | ||||||||||
scalar · Integer32 (0..120) · read-write · current The number of failed console logon attempts that may be made before the system will not accept a further attempt in the time specified by consoleSilentTime. A value of 0 disables the functionality. | |||||||||||||
| SconsoleSilentTime | 1.3.6.1.4.1.259.10.1.5.1.20.1.7 | Integer32 (0..65535) | RW | ||||||||||
scalar · Integer32 (0..65535) · read-write · current The length of time that the management console is inaccessible after the number of failed logon attempts has reached consolePasswordThreshold. A value of 0 disables the functionality. | |||||||||||||
| SconsoleLoginResponseTimeout | 1.3.6.1.4.1.259.10.1.5.1.20.1.10 | Integer32 (0..300) | RW | ||||||||||
scalar · Integer32 (0..300) · read-write · current Console login response timeout setting. Valid range is 0 to 300. Setting to 0 means disabled. | |||||||||||||
| NtelnetMgt | 1.3.6.1.4.1.259.10.1.5.1.20.2 | ||||||||||||
| StelnetStatus | 1.3.6.1.4.1.259.10.1.5.1.20.2.4 | EnabledStatus | RW | ||||||||||
scalar · EnabledStatus · read-write · current To enable or disable the telnet function. Any new telnet request will be rejected and all current telnet sessions will be terminated if this status is set to disabled(2). | |||||||||||||
| StelnetPortNumber | 1.3.6.1.4.1.259.10.1.5.1.20.2.5 | Integer32 (1..65535) | RW | ||||||||||
scalar · Integer32 (1..65535) · read-write · current The telnet session port number. | |||||||||||||
| NvtyMgt | 1.3.6.1.4.1.259.10.1.5.1.20.3 | ||||||||||||
| SvtyExecTimeout | 1.3.6.1.4.1.259.10.1.5.1.20.3.1 | Integer32 (1..65535) | RW | ||||||||||
scalar · Integer32 (1..65535) · read-write · current Specifies the interval that the system waits for user input before terminating the current session. | |||||||||||||
| SvtyPasswordThreshold | 1.3.6.1.4.1.259.10.1.5.1.20.3.2 | Integer32 (0..120) | RW | ||||||||||
scalar · Integer32 (0..120) · read-write · current The number of failed logon attempts that may be made before the system will not accept a further attempt to log on. | |||||||||||||
| SvtyLoginResponseTimeout | 1.3.6.1.4.1.259.10.1.5.1.20.3.3 | Integer32 (0..300) | RW | ||||||||||
scalar · Integer32 (0..300) · read-write · current Login response timeout setting. Setting to 0 means disabled. | |||||||||||||
| SvtyMaxSession | 1.3.6.1.4.1.259.10.1.5.1.20.3.4 | Integer32 (0..8) | RW | ||||||||||
scalar · Integer32 (0..8) · read-write · current The maximum number of allowed sessions. | |||||||||||||
| SvtySilentTime | 1.3.6.1.4.1.259.10.1.5.1.20.3.5 | Integer32 (0..65535) | RW | ||||||||||
scalar · Integer32 (0..65535) · read-write · current The time the system waits before etablishing a new session after the number of failed logins reaches the specified limit.
| |||||||||||||
| NsysTimeMgt | 1.3.6.1.4.1.259.10.1.5.1.23 | ||||||||||||
| NsntpMgt | 1.3.6.1.4.1.259.10.1.5.1.23.1 | ||||||||||||
| SsntpStatus | 1.3.6.1.4.1.259.10.1.5.1.23.1.1 | EnabledStatus | RW | ||||||||||
scalar · EnabledStatus · read-write · current Set enabled(1) to enable the SNTP, set disabled(2) to disable the SNTP. | |||||||||||||
| SsntpServiceMode | 1.3.6.1.4.1.259.10.1.5.1.23.1.2 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Service mode.
| |||||||||||||
| SsntpPollInterval | 1.3.6.1.4.1.259.10.1.5.1.23.1.3 | Integer32 (16..16384) | RW | ||||||||||
scalar · Integer32 (16..16384) · read-write · current Polling interval. | |||||||||||||
| TsntpServerTable | 1.3.6.1.4.1.259.10.1.5.1.23.1.4 | NA | |||||||||||
table · not-accessible · current Table for SNTP servers. IP addresses must occupy contiguous indexes, starting from 1. If a removed entry is not the last entry, the table will be shifted to contiguous indexes automatically. | |||||||||||||
| RsntpServerEntry | 1.3.6.1.4.1.259.10.1.5.1.23.1.4.1 | NA | |||||||||||
| CsntpServerIndex | 1.3.6.1.4.1.259.10.1.5.1.23.1.4.1.1 | Integer32 (1..3) | NA | ||||||||||
column · Integer32 (1..3) · not-accessible · current The index of a server. | |||||||||||||
| CsntpServerInetAddressType | 1.3.6.1.4.1.259.10.1.5.1.23.1.4.1.4 | InetAddressType | RW | ||||||||||
column · InetAddressType · read-write · current Indicates the type of address denoted in sntpServerInetAddress type. Only ipv4(1), ipv6(2) and ipv6z(4) types are supported. | |||||||||||||
| CsntpServerInetAddress | 1.3.6.1.4.1.259.10.1.5.1.23.1.4.1.5 | InetAddress | RW | ||||||||||
column · InetAddress · read-write · current The IP address of a time server. | |||||||||||||
| CsntpServerStatus | 1.3.6.1.4.1.259.10.1.5.1.23.1.4.1.6 | ValidStatus | RC | ||||||||||
column · ValidStatus · read-create · current Setting this to valid(1) creates an entry. Setting this to invalid(2) destroys an entry. | |||||||||||||
| SsysCurrentTime | 1.3.6.1.4.1.259.10.1.5.1.23.2 | DisplayString (SIZE (20)) | RW | ||||||||||
scalar · DisplayString (SIZE (20)) · read-write · current This is a text string in the following form, based on Unix: 'Mmm _d hh:mm:ss yyyy'. 'Mmm' are the first three letters of the English name of the month. '_d' is the day of month. A single-digit day is preceded by a space. 'hh:mm:ss' is a 24-hour representations of hours, minutes, and seconds. A single-digit hour is preceded by a zero. 'yyyy' is a four-digit year. An example is: 'Jan 1 02:03:04 2002'. | |||||||||||||
| SsysTimeZone | 1.3.6.1.4.1.259.10.1.5.1.23.3 | DisplayString (SIZE (5..6)) | RW | ||||||||||
scalar · DisplayString (SIZE (5..6)) · read-write · current This is a text string in the following form: '[s]hh:mm'. '[s]' is a plus-or-minus sign. For UTC, this is omitted. For a positive offset, this is '+'. For a negative offset, this is '-'. 'hh:mm' in the hour and minute offset from UTC. A single-digit hour is preceded by a zero. | |||||||||||||
| SsysTimeZoneName | 1.3.6.1.4.1.259.10.1.5.1.23.4 | DisplayString (SIZE (1..30)) | RW | ||||||||||
scalar · DisplayString (SIZE (1..30)) · read-write · current The name of the time zone. | |||||||||||||
| NfileMgt | 1.3.6.1.4.1.259.10.1.5.1.24 | ||||||||||||
| NfileCopyMgt | 1.3.6.1.4.1.259.10.1.5.1.24.1 | ||||||||||||
| SfileCopySrcOperType | 1.3.6.1.4.1.259.10.1.5.1.24.1.1 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current fileCopySrcOperType specifies where to copy from,
and fileCopyDestOperType specifies where to copy to.
Possible combinations of 'fileCopySrcOperType to
fileCopyDestOperType' and required parameters are listed in
the following table.
--------------+------------------+---------------------------------
Source | Destination | Required parameters
--------------+------------------+---------------------------------
file(1) | file(1) | fileCopySrcFileName
| | fileCopyDestFileName
+------------------+---------------------------------
| runningCfg(2) | fileCopySrcFileName
+------------------+---------------------------------
| startUpCfg(3) | fileCopySrcFileName
| | fileCopyDestFileName
+------------------+---------------------------------
| tftp(4) | fileCopySrcFileName
| | fileCopyDestFileName
| | fileCopyFileType
| | fileCopyServerInetAddressType
| | fileCopyServerInetAddress
+------------------+---------------------------------
| unit(5) | fileCopySrcFileName
| | fileCopyDestFileName
| | fileCopyFileType
| | fileCopyUnitId
+------------------+---------------------------------
| ftp(7) | fileCopySrcFileName
| | fileCopyDestFileName
| | fileCopyFileType
| | fileCopyServerInetAddressType
| | fileCopyServerInetAddress
| | fileCopyServerUserName
| | fileCopyServerPassword
--------------+------------------+---------------------------------
runningCfg(2) | file(1) | fileCopyDestFileName
+------------------+---------------------------------
| startUpCfg(3) | fileCopyDestFileName
+------------------+---------------------------------
| tftp(4) | fileCopyDestFileName
| | fileCopyServerInetAddressType
| | fileCopyServerInetAddress
+------------------+---------------------------------
| ftp(7) | fileCopyDestFileName
| | fileCopyServerInetAddressType
| | fileCopyServerInetAddress
| | fileCopyServerUserName
| | fileCopyServerPassword
--------------+------------------+---------------------------------
startUpCfg(3) | file(1) | fileCopyDestFileName
+------------------+---------------------------------
| runningCfg(2) | None.
+------------------+---------------------------------
| tftp(4) | fileCopyDestFileName
| | fileCopyServerInetAddressType
| | fileCopyServerInetAddress
+------------------+---------------------------------
| ftp(7) | fileCopyDestFileName
| | fileCopyServerInetAddressType
| | fileCopyServerInetAddress
| | fileCopyServerUserName
| | fileCopyServerPassword
--------------+------------------+---------------------------------
tftp(4) | file(1) | fileCopySrcFileName
| | fileCopyDestFileName
| | fileCopyFileType
| | fileCopyServerInetAddressType
| | fileCopyServerInetAddress
+------------------+---------------------------------
| runningCfg(2) | fileCopySrcFileName
| | fileCopyServerInetAddressType
| | fileCopyServerInetAddress
+------------------+---------------------------------
| startUpCfg(3) | fileCopySrcFileName
| | fileCopyDestFileName
| | fileCopyServerInetAddressType
| | fileCopyServerInetAddress
--------------+------------------+---------------------------------
unit(5) | file(1) | fileCopySrcFileName
| | fileCopyDestFileName
| | fileCopyFileType
| | fileCopyUnitId
--------------+------------------+---------------------------------
ftp(7) | file(1) | fileCopySrcFileName
| | fileCopyDestFileName
| | fileCopyFileType
| | fileCopyServerInetAddressType
| | fileCopyServerInetAddress
| | fileCopyServerUserName
| | fileCopyServerPassword
+------------------+---------------------------------
| runningCfg(2) | fileCopySrcFileName
| | fileCopyServerInetAddressType
| | fileCopyServerInetAddress
| | fileCopyServerUserName
| | fileCopyServerPassword
+------------------+---------------------------------
| startUpCfg(3) | fileCopySrcFileName
| | fileCopyDestFileName
| | fileCopyServerInetAddressType
| | fileCopyServerInetAddress
| | fileCopyServerUserName
| | fileCopyServerPassword
--------------+------------------+---------------------------------
| |||||||||||||
| SfileCopySrcFileName | 1.3.6.1.4.1.259.10.1.5.1.24.1.2 | DisplayString (SIZE (0..127)) | RW | ||||||||||
scalar · DisplayString (SIZE (0..127)) · read-write · current The source file name for fileCopyMgt when a copy operation is next requested via this MIB. This value is set to a zero length string when no file name has been specified. | |||||||||||||
| SfileCopyDestOperType | 1.3.6.1.4.1.259.10.1.5.1.24.1.3 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current See the description for fileCopySrcOperType.
| |||||||||||||
| SfileCopyDestFileName | 1.3.6.1.4.1.259.10.1.5.1.24.1.4 | DisplayString (SIZE (0..127)) | RW | ||||||||||
scalar · DisplayString (SIZE (0..127)) · read-write · current The destination file name for fileCopyMgt when a copy operation is next requested via this MIB. This value is set to a zero length string when no file name has been specified. | |||||||||||||
| SfileCopyFileType | 1.3.6.1.4.1.259.10.1.5.1.24.1.5 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Type of file to copy in fileCopyMgt. opcode(1) indicates operation code, config(2) indicates configuration file.
| |||||||||||||
| SfileCopyUnitId | 1.3.6.1.4.1.259.10.1.5.1.24.1.7 | Integer32 | RW | ||||||||||
scalar · Integer32 · read-write · current Specifies the switch unit for stackable devices. | |||||||||||||
| SfileCopyAction | 1.3.6.1.4.1.259.10.1.5.1.24.1.8 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Set this object to copy(2) to begin the copy operation. When the device is not copying, this object will have a value of notCopying(1). Setting this object to abortTftp(3) to abort a TFTP transfer.
| |||||||||||||
| SfileCopyStatus | 1.3.6.1.4.1.259.10.1.5.1.24.1.9 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current The status of the last copy procedure, if any. This object will have a value of fileCopyUnknown(18) if no copy operation has been performed.
| |||||||||||||
| SfileCopyServerInetAddressType | 1.3.6.1.4.1.259.10.1.5.1.24.1.20 | InetAddressType | RW | ||||||||||
scalar · InetAddressType · read-write · current Internet address type of the remote server. Only ipv4(1) type is supported. | |||||||||||||
| SfileCopyServerInetAddress | 1.3.6.1.4.1.259.10.1.5.1.24.1.21 | InetAddress | RW | ||||||||||
scalar · InetAddress · read-write · current Internet address of the remote server. | |||||||||||||
| SfileCopyServerUserName | 1.3.6.1.4.1.259.10.1.5.1.24.1.22 | DisplayString (SIZE (0..127)) | RW | ||||||||||
scalar · DisplayString (SIZE (0..127)) · read-write · current Login user name for the remote server. When this variable is empty, the system will use 'anonymous' as user name to log in to the remote server. | |||||||||||||
| SfileCopyServerPassword | 1.3.6.1.4.1.259.10.1.5.1.24.1.23 | DisplayString (SIZE (0..127)) | RW | ||||||||||
scalar · DisplayString (SIZE (0..127)) · read-write · current Login password for the remote server. This variable can only be written. When this variable is read, it always returns a zero-length string. | |||||||||||||
| NfileInfoMgt | 1.3.6.1.4.1.259.10.1.5.1.24.2 | ||||||||||||
| TfileInfoTable | 1.3.6.1.4.1.259.10.1.5.1.24.2.1 | NA | |||||||||||
table · not-accessible · current This table contain the information of the file system; we can also perform the delete, set startup file operation. | |||||||||||||
| RfileInfoEntry | 1.3.6.1.4.1.259.10.1.5.1.24.2.1.1 | NA | |||||||||||
row · not-accessible · current A conceptually row for fileInfoTable. | |||||||||||||
| CfileInfoUnitID | 1.3.6.1.4.1.259.10.1.5.1.24.2.1.1.1 | Integer32 | NA | ||||||||||
column · Integer32 · not-accessible · current The switch unit in a stacking system, in a non-stacking system, this value is always 1. | |||||||||||||
| CfileInfoFileName | 1.3.6.1.4.1.259.10.1.5.1.24.2.1.1.2 | DisplayString (SIZE (1..32)) | NA | ||||||||||
column · DisplayString (SIZE (1..32)) · not-accessible · current The file Name of the file System in the device. | |||||||||||||
| CfileInfoFileType | 1.3.6.1.4.1.259.10.1.5.1.24.2.1.1.3 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current The file type of the file System in the device.
| |||||||||||||
| CfileInfoIsStartUp | 1.3.6.1.4.1.259.10.1.5.1.24.2.1.1.4 | TruthValue | RW | ||||||||||
column · TruthValue · read-write · current This flag indicate whether this file is a startup file. Set this object to true(1) to indicate that this is a startup file. Setting this object to false(2) is a invalid operation. | |||||||||||||
| CfileInfoFileSize | 1.3.6.1.4.1.259.10.1.5.1.24.2.1.1.5 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current The sizes( in bytes) of the file.
| |||||||||||||
| CfileInfoCreationTime | 1.3.6.1.4.1.259.10.1.5.1.24.2.1.1.6 | DisplayString (SIZE (20)) | RO | ||||||||||
column · DisplayString (SIZE (20)) · read-only · current The creation time of the file, This is a text string in the following form, based on Unix: 'Mmm _d hh:mm:ss yyyy'. 'Mmm' are the first three letters of the English name of the month. '_d' is the day of month. A single-digit day is preceded by a space. 'hh:mm:ss' is a 24-hour representations of hours, minutes, and seconds. A single-digit hour is preceded by a zero. 'yyyy' is the four-digit year. An example is: 'Jan 1 02:03:04 2002'. | |||||||||||||
| CfileInfoDelete | 1.3.6.1.4.1.259.10.1.5.1.24.2.1.1.7 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Write this object to delete(2) to delete a file, when read, this always return noDelete(1).
| |||||||||||||
| TfileAutoDownloadResultTable | 1.3.6.1.4.1.259.10.1.5.1.24.3 | NA | |||||||||||
table · not-accessible · current This table contains file auto download result information. | |||||||||||||
| RfileAutoDownloadResultEntry | 1.3.6.1.4.1.259.10.1.5.1.24.3.1 | NA | |||||||||||
row · not-accessible · current A conceptual row for fileAutoDownloadResultTable. | |||||||||||||
| CfileAutoDownloadResultUnitID | 1.3.6.1.4.1.259.10.1.5.1.24.3.1.1 | Integer32 | NA | ||||||||||
column · Integer32 · not-accessible · current The switch unit in a stacking system, in a non-stacking system, this value is always 1. | |||||||||||||
| CfileAutoDownloadResultAction | 1.3.6.1.4.1.259.10.1.5.1.24.3.1.2 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current The status of the auto download action. value copying(2) will be obtained if the auto download action is currently processing, or value notCopying(1) will be obtained if no auto download action is currently processing. You can check the download result through the fileAutoDownloadResultStatus object after the download action has finished. Please note that this object is read-only, since the auto download action is triggered automatically by the system when an image file or a config file is set as startup setting through the fileInfoIsStartUp, restartOpCodeFile or restartConfigFile objects, but not set by the user manually through this fileAutoDownloadResultAction object.
| |||||||||||||
| CfileAutoDownloadResultStatus | 1.3.6.1.4.1.259.10.1.5.1.24.3.1.3 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current The last auto download result status. value fileCopyUnknown(18) will be obtained if no download action has been performed before.
| |||||||||||||
| NdnsMgt | 1.3.6.1.4.1.259.10.1.5.1.26 | ||||||||||||
| SdnsDomainLookup | 1.3.6.1.4.1.259.10.1.5.1.26.1 | EnabledStatus | RW | ||||||||||
scalar · EnabledStatus · read-write · current To enable the IP Domain Naming System (DNS)-based host name-to-address translation. | |||||||||||||
| SdnsDomainName | 1.3.6.1.4.1.259.10.1.5.1.26.2 | DisplayString (SIZE (0..255)) | RW | ||||||||||
scalar · DisplayString (SIZE (0..255)) · read-write · current To define a default domain name to complete unqualified host names (names without a dotted-decimal domain name). | |||||||||||||
| TdnsCacheTable | 1.3.6.1.4.1.259.10.1.5.1.26.7 | NA | |||||||||||
table · not-accessible · current To display the RRs in DNS cache. | |||||||||||||
| RdnsCacheEntry | 1.3.6.1.4.1.259.10.1.5.1.26.7.1 | NA | |||||||||||
| CdnsCacheIndex | 1.3.6.1.4.1.259.10.1.5.1.26.7.1.1 | Integer32 | NA | ||||||||||
column · Integer32 · not-accessible · current The entry sequence number. | |||||||||||||
| CdnsCacheFlag | 1.3.6.1.4.1.259.10.1.5.1.26.7.1.2 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current Always get 4, means this record is unreliable. | |||||||||||||
| CdnsCacheType | 1.3.6.1.4.1.259.10.1.5.1.26.7.1.3 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current Cache Type: address(1); cname(2).
| |||||||||||||
| CdnsCacheTtl | 1.3.6.1.4.1.259.10.1.5.1.26.7.1.5 | Integer32 (0..876000) | RO | ||||||||||
column · Integer32 (0..876000) · read-only · current The DNS cache TTL. | |||||||||||||
| CdnsCacheDomain | 1.3.6.1.4.1.259.10.1.5.1.26.7.1.6 | DisplayString (SIZE (1..255)) | RO | ||||||||||
column · DisplayString (SIZE (1..255)) · read-only · current The DNS cache domain. | |||||||||||||
| CdnsCacheInetAddressType | 1.3.6.1.4.1.259.10.1.5.1.26.7.1.7 | InetAddressType | RO | ||||||||||
column · InetAddressType · read-only · current Indicates the type of address denoted in dnsHostAddrInetAddress type. Only ipv4(1) and ipv6(2) types are supported. | |||||||||||||
| CdnsCacheInetAddress | 1.3.6.1.4.1.259.10.1.5.1.26.7.1.8 | InetAddress | RO | ||||||||||
column · InetAddress · read-only · current IP address of DNS cache item. | |||||||||||||
| TdnsHostTable | 1.3.6.1.4.1.259.10.1.5.1.26.8 | NA | |||||||||||
table · not-accessible · current The conceptual table of dnsHostEntry. The dnsHostTable and dnsHostAddrTable are used to define static host name-to-address mapping. | |||||||||||||
| RdnsHostEntry | 1.3.6.1.4.1.259.10.1.5.1.26.8.1 | NA | |||||||||||
| CdnsHostIndex | 1.3.6.1.4.1.259.10.1.5.1.26.8.1.1 | Integer32 | NA | ||||||||||
column · Integer32 · not-accessible · current The entry sequence number. | |||||||||||||
| CdnsHostName | 1.3.6.1.4.1.259.10.1.5.1.26.8.1.2 | DisplayString (SIZE (1..255)) | RC | ||||||||||
column · DisplayString (SIZE (1..255)) · read-create · current Host name. | |||||||||||||
| CdnsHostStatus | 1.3.6.1.4.1.259.10.1.5.1.26.8.1.3 | ValidStatus | RC | ||||||||||
column · ValidStatus · read-create · current Setting this to valid(1) creates an entry. Setting this to invalid(2) destroys an entry. | |||||||||||||
| TdnsHostAddrTable | 1.3.6.1.4.1.259.10.1.5.1.26.9 | NA | |||||||||||
table · not-accessible · current The conceptual table of dnsHostAddrEntry. The dnsHostTable and dnsHostAddrTable are used to define static host name-to-address mapping. | |||||||||||||
| RdnsHostAddrEntry | 1.3.6.1.4.1.259.10.1.5.1.26.9.1 | NA | |||||||||||
row · not-accessible · current A conceptual row for the dnsHostAddrTable. | |||||||||||||
| CdnsHostAddrInetAddressType | 1.3.6.1.4.1.259.10.1.5.1.26.9.1.1 | InetAddressType | NA | ||||||||||
column · InetAddressType · not-accessible · current Indicates the type of address denoted in dnsHostAddrInetAddress type. Only ipv4(1), ipv6(2) and ipv6z(4) type are supported. | |||||||||||||
| CdnsHostAddrInetAddress | 1.3.6.1.4.1.259.10.1.5.1.26.9.1.2 | InetAddress | NA | ||||||||||
column · InetAddress · not-accessible · current Specifies the address of the host. Adding one address to two different hosts is not allowed. | |||||||||||||
| CdnsHostAddrStatus | 1.3.6.1.4.1.259.10.1.5.1.26.9.1.3 | ValidStatus | RC | ||||||||||
column · ValidStatus · read-create · current Setting this to valid(1) creates an entry. Setting this to invalid(2) destroys an entry. | |||||||||||||
| TdnsDomainListTable | 1.3.6.1.4.1.259.10.1.5.1.26.10 | NA | |||||||||||
table · not-accessible · current This table defines a list of default domain names to complete unqualified host names. | |||||||||||||
| RdnsDomainListEntry | 1.3.6.1.4.1.259.10.1.5.1.26.10.1 | NA | |||||||||||
| CdnsDomainListIndex | 1.3.6.1.4.1.259.10.1.5.1.26.10.1.1 | Integer32 | NA | ||||||||||
column · Integer32 · not-accessible · current The entry sequence number. | |||||||||||||
| CdnsDomainListName | 1.3.6.1.4.1.259.10.1.5.1.26.10.1.2 | DisplayString (SIZE (1..255)) | RC | ||||||||||
column · DisplayString (SIZE (1..255)) · read-create · current Domain name. | |||||||||||||
| CdnsDomainListStatus | 1.3.6.1.4.1.259.10.1.5.1.26.10.1.3 | ValidStatus | RC | ||||||||||
column · ValidStatus · read-create · current Setting this to valid(1) creates an entry. Setting this to invalid(2) destroys an entry. | |||||||||||||
| TdnsNameServerInetTable | 1.3.6.1.4.1.259.10.1.5.1.26.11 | NA | |||||||||||
table · not-accessible · current Specifies the address of one or more name servers to use for name and address resolution. | |||||||||||||
| RdnsNameServerInetEntry | 1.3.6.1.4.1.259.10.1.5.1.26.11.1 | NA | |||||||||||
row · not-accessible · current A conceptual row for dnsNameServerInetTable. | |||||||||||||
| CdnsNameServerInetAddressType | 1.3.6.1.4.1.259.10.1.5.1.26.11.1.1 | InetAddressType | NA | ||||||||||
column · InetAddressType · not-accessible · current Type of address. Only ipv4(1), ipv6(2) and ipv6z(4) types are supported. | |||||||||||||
| CdnsNameServerInetAddress | 1.3.6.1.4.1.259.10.1.5.1.26.11.1.2 | InetAddress | NA | ||||||||||
column · InetAddress · not-accessible · current IP address of name server. | |||||||||||||
| CdnsNameServerInetStatus | 1.3.6.1.4.1.259.10.1.5.1.26.11.1.3 | ValidStatus | RC | ||||||||||
column · ValidStatus · read-create · current Setting this to valid(1) creates an entry. Setting this to invalid(2) destroys an entry. | |||||||||||||
| NstormMgt | 1.3.6.1.4.1.259.10.1.5.1.33 | ||||||||||||
| NmcastStormMgt | 1.3.6.1.4.1.259.10.1.5.1.33.1 | ||||||||||||
| TmcastStormTable | 1.3.6.1.4.1.259.10.1.5.1.33.1.1 | NA | |||||||||||
table · not-accessible · current Table to manage the control of multicast storms for ports. | |||||||||||||
| RmcastStormEntry | 1.3.6.1.4.1.259.10.1.5.1.33.1.1.1 | NA | |||||||||||
| CmcastStormIfIndex | 1.3.6.1.4.1.259.10.1.5.1.33.1.1.1.1 | Integer32 | NA | ||||||||||
column · Integer32 · not-accessible · current The port and the trunk (including trunk members) interface of the portTable. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex in the IF-MIB. | |||||||||||||
| CmcastStormStatus | 1.3.6.1.4.1.259.10.1.5.1.33.1.1.1.2 | EnabledStatus | RW | ||||||||||
column · EnabledStatus · read-write · current Whether multicast storm protection is enabled. | |||||||||||||
| CmcastStormPktRate | 1.3.6.1.4.1.259.10.1.5.1.33.1.1.1.4 | Integer32 | RW | ||||||||||
column · Integer32 · read-write · current Multicast storm threshold as packets per second. If this entry is for a trunk, this is the value for each member port. The range is 500 to 262143. | |||||||||||||
| NbcastStormMgt | 1.3.6.1.4.1.259.10.1.5.1.33.3 | ||||||||||||
| TbcastStormTable | 1.3.6.1.4.1.259.10.1.5.1.33.3.1 | NA | |||||||||||
table · not-accessible · current Table to manage the control of broadcast storms for ports. | |||||||||||||
| RbcastStormEntry | 1.3.6.1.4.1.259.10.1.5.1.33.3.1.1 | NA | |||||||||||
| CbcastStormIfIndex | 1.3.6.1.4.1.259.10.1.5.1.33.3.1.1.1 | Integer32 | NA | ||||||||||
column · Integer32 · not-accessible · current The port and the trunk (including trunk members) interface of the portTable. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex in the IF-MIB. | |||||||||||||
| CbcastStormStatus | 1.3.6.1.4.1.259.10.1.5.1.33.3.1.1.2 | EnabledStatus | RW | ||||||||||
column · EnabledStatus · read-write · current Whether broadcast storm protection is enabled. | |||||||||||||
| CbcastStormPktRate | 1.3.6.1.4.1.259.10.1.5.1.33.3.1.1.4 | Integer32 | RW | ||||||||||
column · Integer32 · read-write · current Broadcast storm threshold as packets per second. If this entry is for a trunk, this is the value for each member port. The range is 500 to 262143. | |||||||||||||
| NunknownUcastStormMgt | 1.3.6.1.4.1.259.10.1.5.1.33.4 | ||||||||||||
| TunknownUcastStormTable | 1.3.6.1.4.1.259.10.1.5.1.33.4.1 | NA | |||||||||||
table · not-accessible · current Table to manage the unknown unicast storm control. | |||||||||||||
| RunknownUcastStormEntry | 1.3.6.1.4.1.259.10.1.5.1.33.4.1.1 | NA | |||||||||||
row · not-accessible · current The conceptual row of unknownUcastStormTable. | |||||||||||||
| CunknownUcastStormIfIndex | 1.3.6.1.4.1.259.10.1.5.1.33.4.1.1.1 | Integer32 | NA | ||||||||||
column · Integer32 · not-accessible · current The port or trunk interface of the portTable. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex in the IF-MIB. | |||||||||||||
| CunknownUcastStormStatus | 1.3.6.1.4.1.259.10.1.5.1.33.4.1.1.2 | EnabledStatus | RW | ||||||||||
column · EnabledStatus · read-write · current The parameter indicates that the unknown unicast storm protection is enabled/disabled. | |||||||||||||
| CunknownUcastStormPktRate | 1.3.6.1.4.1.259.10.1.5.1.33.4.1.1.4 | Integer32 | RW | ||||||||||
column · Integer32 · read-write · current The parameter indicates the packet rate(packet per second) of the storm protection. The range is 500 to 262143. | |||||||||||||
| NatcMgt | 1.3.6.1.4.1.259.10.1.5.1.33.5 | ||||||||||||
| SatcBcastStormTcApplyTime | 1.3.6.1.4.1.259.10.1.5.1.33.5.1 | Integer32 | RW | ||||||||||
scalar · Integer32 · read-write · current The parameter indicates the timing when the ATC (Auto Traffic Control) is activated after the broadcast traffic being detected as the storm. | |||||||||||||
| SatcBcastStormTcReleaseTime | 1.3.6.1.4.1.259.10.1.5.1.33.5.2 | Integer32 | RW | ||||||||||
scalar · Integer32 · read-write · current The parameter indicates the timing when the ATC is released after the broadcast traffic being detected as no storm. | |||||||||||||
| TatcBcastStormTable | 1.3.6.1.4.1.259.10.1.5.1.33.5.3 | NA | |||||||||||
table · not-accessible · current The table contains the Auto Traffic Control configuration and the status for broadcast traffic. | |||||||||||||
| RatcBcastStormEntry | 1.3.6.1.4.1.259.10.1.5.1.33.5.3.1 | NA | |||||||||||
| CatcBcastStormIfIndex | 1.3.6.1.4.1.259.10.1.5.1.33.5.3.1.1 | Integer32 | AN | ||||||||||
column · Integer32 · accessible-for-notify · current The specified port on which the ATC is applied. | |||||||||||||
| CatcBcastStormEnable | 1.3.6.1.4.1.259.10.1.5.1.33.5.3.1.2 | EnabledStatus | RW | ||||||||||
column · EnabledStatus · read-write · current The parameter indicates whether the ATC of the broadcast traffic is applied. | |||||||||||||
| CatcBcastStormAutoRelease | 1.3.6.1.4.1.259.10.1.5.1.33.5.3.1.3 | EnabledStatus | RW | ||||||||||
column · EnabledStatus · read-write · current The parameter indicates whether the Auto-Release feature of ATC is applied. | |||||||||||||
| CatcBcastStormSampleType | 1.3.6.1.4.1.259.10.1.5.1.33.5.3.1.4 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current The parameter indicates the unit of traffic rate and threshold.
| |||||||||||||
| CatcBcastStormCurrentTrafficRate | 1.3.6.1.4.1.259.10.1.5.1.33.5.3.1.5 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current The parameter indicates the current broadcast traffic rate. | |||||||||||||
| CatcBcastStormAlarmFireThreshold | 1.3.6.1.4.1.259.10.1.5.1.33.5.3.1.6 | Integer32 | RW | ||||||||||
column · Integer32 · read-write · current The parameter indicates that if the current broadcast traffic rate exceeds the specified threshold, it will be treated as the storm. | |||||||||||||
| CatcBcastStormAlarmClearThreshold | 1.3.6.1.4.1.259.10.1.5.1.33.5.3.1.7 | Integer32 | RW | ||||||||||
column · Integer32 · read-write · current The parameter indicates that if the current broadcast traffic falls below the specified threshold it will be treated as the normal traffic. | |||||||||||||
| CatcBcastStormTcAction | 1.3.6.1.4.1.259.10.1.5.1.33.5.3.1.8 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current The parameter indicates the protecting action which ATC will applied to the specified port.
| |||||||||||||
| CatcBcastStormAlarmFireTrapStatus | 1.3.6.1.4.1.259.10.1.5.1.33.5.3.1.9 | EnabledStatus | RW | ||||||||||
column · EnabledStatus · read-write · current The parameter indicates whether the trap has to be sent when the broadcast storm has been detected. | |||||||||||||
| CatcBcastStormAlarmClearTrapStatus | 1.3.6.1.4.1.259.10.1.5.1.33.5.3.1.10 | EnabledStatus | RW | ||||||||||
column · EnabledStatus · read-write · current The parameter indicates whether the trap has to be sent when the broadcast storm has been detected as the normal traffic. | |||||||||||||
| CatcBcastStormTcApplyTrapStatus | 1.3.6.1.4.1.259.10.1.5.1.33.5.3.1.11 | EnabledStatus | RW | ||||||||||
column · EnabledStatus · read-write · current The parameter indicates whether the trap has to be sent when the ATC is activated. | |||||||||||||
| CatcBcastStormTcReleaseTrapStatus | 1.3.6.1.4.1.259.10.1.5.1.33.5.3.1.12 | EnabledStatus | RW | ||||||||||
column · EnabledStatus · read-write · current The parameter indicates whether the trap has to be sent when the ATC is released. | |||||||||||||
| SatcMcastStormTcApplyTime | 1.3.6.1.4.1.259.10.1.5.1.33.5.4 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current The parameter indicates the timing when the ATC (Auto Traffic Control) is activated after the broadcast traffic being detected as the storm. | |||||||||||||
| SatcMcastStormTcReleaseTime | 1.3.6.1.4.1.259.10.1.5.1.33.5.5 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current The parameter indicates the timing when the ATC is released after the broadcast traffic being detected as no storm. | |||||||||||||
| TatcMcastStormTable | 1.3.6.1.4.1.259.10.1.5.1.33.5.6 | NA | |||||||||||
table · not-accessible · current The table contains the Auto Traffic Control configuration and the status for mulicast traffic. | |||||||||||||
| RatcMcastStormEntry | 1.3.6.1.4.1.259.10.1.5.1.33.5.6.1 | NA | |||||||||||
| CatcMcastStormIfIndex | 1.3.6.1.4.1.259.10.1.5.1.33.5.6.1.1 | Integer32 | AN | ||||||||||
column · Integer32 · accessible-for-notify · current The specified port on which the ATC is applied. | |||||||||||||
| CatcMcastStormEnable | 1.3.6.1.4.1.259.10.1.5.1.33.5.6.1.2 | EnabledStatus | RW | ||||||||||
column · EnabledStatus · read-write · current The parameter indicates whether the ATC of the mulicast traffic is applied. | |||||||||||||
| CatcMcastStormAutoRelease | 1.3.6.1.4.1.259.10.1.5.1.33.5.6.1.3 | EnabledStatus | RW | ||||||||||
column · EnabledStatus · read-write · current The parameter indicates whether the Auto-Release feature of ATC is applied. | |||||||||||||
| CatcMcastStormSampleType | 1.3.6.1.4.1.259.10.1.5.1.33.5.6.1.4 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current The parameter indicates the unit of traffic rate and threshold.
| |||||||||||||
| CatcMcastStormCurrentTrafficRate | 1.3.6.1.4.1.259.10.1.5.1.33.5.6.1.5 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current The parameter indicates the current mulicast traffic rate. | |||||||||||||
| CatcMcastStormAlarmFireThreshold | 1.3.6.1.4.1.259.10.1.5.1.33.5.6.1.6 | Integer32 | RW | ||||||||||
column · Integer32 · read-write · current The parameter indicates that if the current mulicast traffic rate exceeds the specified threshold, it will be treated as the storm. | |||||||||||||
| CatcMcastStormAlarmClearThreshold | 1.3.6.1.4.1.259.10.1.5.1.33.5.6.1.7 | Integer32 | RW | ||||||||||
column · Integer32 · read-write · current The parameter indicates that if the current mulicast traffic falls below the specified threshold it will be treated as the normal traffic. | |||||||||||||
| CatcMcastStormTcAction | 1.3.6.1.4.1.259.10.1.5.1.33.5.6.1.8 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current The parameter indicates the protecting action which ATC will applied to the specified port.
| |||||||||||||
| CatcMcastStormAlarmFireTrapStatus | 1.3.6.1.4.1.259.10.1.5.1.33.5.6.1.9 | EnabledStatus | RW | ||||||||||
column · EnabledStatus · read-write · current The parameter indicates whether the trap has to be sent when the mulicast storm has been detected. | |||||||||||||
| CatcMcastStormAlarmClearTrapStatus | 1.3.6.1.4.1.259.10.1.5.1.33.5.6.1.10 | EnabledStatus | RW | ||||||||||
column · EnabledStatus · read-write · current The parameter indicates whether the trap has to be sent when the mulicast storm has been detected as the normal traffic. | |||||||||||||
| CatcMcastStormTcApplyTrapStatus | 1.3.6.1.4.1.259.10.1.5.1.33.5.6.1.11 | EnabledStatus | RW | ||||||||||
column · EnabledStatus · read-write · current The parameter indicates whether the trap has to be sent when the ATC is activated. | |||||||||||||
| CatcMcastStormTcReleaseTrapStatus | 1.3.6.1.4.1.259.10.1.5.1.33.5.6.1.12 | EnabledStatus | RW | ||||||||||
column · EnabledStatus · read-write · current The parameter indicates whether the trap has to be sent when the ATC is released. | |||||||||||||
| NsysResourceMgt | 1.3.6.1.4.1.259.10.1.5.1.39 | ||||||||||||
| NcpuStatus | 1.3.6.1.4.1.259.10.1.5.1.39.2 | ||||||||||||
| ScpuCurrentUti | 1.3.6.1.4.1.259.10.1.5.1.39.2.1 | Integer32 (1..100) | RO | 66 | |||||||||
scalar · Integer32 (1..100) · read-only · current The current CPU utilization in percent in the past 5 seconds.
Example values from LibreNMS test devices
| |||||||||||||
| ScpuStatMaxUti | 1.3.6.1.4.1.259.10.1.5.1.39.2.2 | Integer32 (1..100) | RO | ||||||||||
scalar · Integer32 (1..100) · read-only · current The maximum CPU utilization in percent in the past 60 seconds.
| |||||||||||||
| ScpuStatAvgUti | 1.3.6.1.4.1.259.10.1.5.1.39.2.3 | Integer32 (1..100) | RO | ||||||||||
scalar · Integer32 (1..100) · read-only · current The average CPU utilization in percent in the past 60 seconds.
| |||||||||||||
| ScpuPeakTime | 1.3.6.1.4.1.259.10.1.5.1.39.2.4 | DisplayString | RO | ||||||||||
scalar · DisplayString · read-only · current The time when the CPU utilization reaches cpuUtiRisingThreshold in the format of 'Mmm _d hh:mm:ss yyyy' as defined in sysCurrentTime of this MIB. | |||||||||||||
| ScpuPeakDuration | 1.3.6.1.4.1.259.10.1.5.1.39.2.5 | Integer32 | RO | ||||||||||
scalar · Integer32 · read-only · current The duration from the CPU utilization reaches cpuUtiRisingThreshold to reaches cpuUtiFallingThreshold, in seconds.
| |||||||||||||
| ScpuUtiRisingThreshold | 1.3.6.1.4.1.259.10.1.5.1.39.2.6 | Integer32 (1..100) | RW | ||||||||||
scalar · Integer32 (1..100) · read-write · current The rising threshold of the cpu utilization.
| |||||||||||||
| ScpuUtiFallingThreshold | 1.3.6.1.4.1.259.10.1.5.1.39.2.7 | Integer32 (1..100) | RW | ||||||||||
scalar · Integer32 (1..100) · read-write · current The falling threshold of the cpu utilization.
| |||||||||||||
| NmemoryStatus | 1.3.6.1.4.1.259.10.1.5.1.39.3 | ||||||||||||
| SmemoryTotal | 1.3.6.1.4.1.259.10.1.5.1.39.3.1 | Integer32 | RO | 268435456 | |||||||||
scalar · Integer32 · read-only · current The total amount of the memory in kilobytes. Example values from LibreNMS test devices
| |||||||||||||
| SmemoryAllocated | 1.3.6.1.4.1.259.10.1.5.1.39.3.2 | Integer32 | RO | 113373184 | |||||||||
scalar · Integer32 · read-only · current The amount of the memory allocated in kilobytes. Example values from LibreNMS test devices
| |||||||||||||
| SmemoryFreed | 1.3.6.1.4.1.259.10.1.5.1.39.3.3 | Integer32 | RO | 155062272 | |||||||||
scalar · Integer32 · read-only · current The amount of the free memory in kilobytes. Example values from LibreNMS test devices
| |||||||||||||
| SmemoryFreedInPercent | 1.3.6.1.4.1.259.10.1.5.1.39.3.4 | Integer32 (1..100) | RO | ||||||||||
scalar · Integer32 (1..100) · read-only · current the memory freed in proportion to the total memory. | |||||||||||||
| SmemoryUtiRisingThreshold | 1.3.6.1.4.1.259.10.1.5.1.39.3.5 | Integer32 (1..100) | RW | ||||||||||
scalar · Integer32 (1..100) · read-write · current The rising threshold of the memory utilization.
| |||||||||||||
| SmemoryUtiFallingThreshold | 1.3.6.1.4.1.259.10.1.5.1.39.3.6 | Integer32 (1..100) | RW | ||||||||||
scalar · Integer32 (1..100) · read-write · current The falling threshold of the memory utilization.
| |||||||||||||
| NmvrMgt | 1.3.6.1.4.1.259.10.1.5.1.44 | ||||||||||||
| TmvrDomainTable | 1.3.6.1.4.1.259.10.1.5.1.44.20 | NA | |||||||||||
table · not-accessible · current The table for configuring the MVR port. | |||||||||||||
| RmvrDomainEntry | 1.3.6.1.4.1.259.10.1.5.1.44.20.1 | NA | |||||||||||
| CmvrDomainId | 1.3.6.1.4.1.259.10.1.5.1.44.20.1.1 | Integer32 | NA | ||||||||||
column · Integer32 · not-accessible · current Speicfies which MVR domain to configure. | |||||||||||||
| CmvrDomainStatus | 1.3.6.1.4.1.259.10.1.5.1.44.20.1.2 | EnabledStatus | RW | ||||||||||
column · EnabledStatus · read-write · current Parameter to enable or disable MVR(Multicast VLAN Registration) on the device. | |||||||||||||
| CmvrDomainRunningStatus | 1.3.6.1.4.1.259.10.1.5.1.44.20.1.3 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current Describes the running status of MVR (Multicast VLAN Registration) to the switch. A value of active(1) indicates that all necessary conditions in the MVR environment are satisfied. A value of inactive(2) indicates that some necessary conditions in the MVR environment are not satisfied.
| |||||||||||||
| CmvrDomainVlanId | 1.3.6.1.4.1.259.10.1.5.1.44.20.1.4 | Integer32 (1..4093) | RW | ||||||||||
column · Integer32 (1..4093) · read-write · current To set VLAN for MVR.The VLAN identified by a particular value of this index is the same VLAN as identified by the same value of dot1qVlanIndex in the Q-BRIDGE-MIB. | |||||||||||||
| CmvrDomainUpstreamSourceIp | 1.3.6.1.4.1.259.10.1.5.1.44.20.1.5 | IpAddress | RW | ||||||||||
column · IpAddress · read-write · current Set the source IP address which MVR will carry in IP header when send IGMP packet to upstream router through MVR source port. | |||||||||||||
| TmvrDomainPortTable | 1.3.6.1.4.1.259.10.1.5.1.44.21 | NA | |||||||||||
table · not-accessible · current The table for configuring the MVR port. | |||||||||||||
| RmvrDomainPortEntry | 1.3.6.1.4.1.259.10.1.5.1.44.21.1 | NA | |||||||||||
row · not-accessible · current The entry for configuring the MVR port. | |||||||||||||
| CmvrPortDomainId | 1.3.6.1.4.1.259.10.1.5.1.44.21.1.1 | Integer32 (1..5) | NA | ||||||||||
column · Integer32 (1..5) · not-accessible · current Speicfies which MVR domain to configure. | |||||||||||||
| CmvrDomainIfIndex | 1.3.6.1.4.1.259.10.1.5.1.44.21.1.2 | InterfaceIndex | NA | ||||||||||
column · InterfaceIndex · not-accessible · current The port interface of the portTable. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex in the IF-MIB. | |||||||||||||
| CmvrDomainPortType | 1.3.6.1.4.1.259.10.1.5.1.44.21.1.3 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current For configuring the MVR port type. To disable the MVR port type, use the none(0).
| |||||||||||||
| CmvrDomainPortImmediateLeave | 1.3.6.1.4.1.259.10.1.5.1.44.21.1.4 | EnabledStatus | RW | ||||||||||
column · EnabledStatus · read-write · current To enable immediate leave on MVR port. | |||||||||||||
| CmvrDomainPortActive | 1.3.6.1.4.1.259.10.1.5.1.44.21.1.5 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current To indicate if the port is associated with the MVR group. If the port is the MVR receiver port or the MVR source port in MVR vlan, the status is active(1); otherwise the status is inactive(2).
| |||||||||||||
| NmvrProfileTable | 1.3.6.1.4.1.259.10.1.5.1.44.22 | ||||||||||||
| TmvrProfileCtlTable | 1.3.6.1.4.1.259.10.1.5.1.44.22.1 | NA | |||||||||||
table · not-accessible · current The entry for configuring the MVR profile. | |||||||||||||
| RmvrProfileCtlEntry | 1.3.6.1.4.1.259.10.1.5.1.44.22.1.1 | NA | |||||||||||
| CmvrProfileCtlId | 1.3.6.1.4.1.259.10.1.5.1.44.22.1.1.1 | Integer32 | NA | ||||||||||
column · Integer32 · not-accessible · current Profile ID to index which MVR profile | |||||||||||||
| CmvrProfileName | 1.3.6.1.4.1.259.10.1.5.1.44.22.1.1.2 | OCTET STRING | RW | ||||||||||
column · OCTET STRING · read-write · current MVR Profile name which identify a group range. NOTE: All mvrProfileCtlEntry use the same buffer to temply store the mvrProfileName before mvrProfileCtlAction really creat the profile. | |||||||||||||
| CmvrProfileCtlAction | 1.3.6.1.4.1.259.10.1.5.1.44.22.1.1.5 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Set this object to create(2) to create profile. Set this object to destory(3) to delete profile. When the action is complete, this object becomes noAction(1).
| |||||||||||||
| TmvrProfileGroupCtlTable | 1.3.6.1.4.1.259.10.1.5.1.44.22.2 | NA | |||||||||||
table · not-accessible · current The entry for configuring the MVR group ranges for MVR profile. | |||||||||||||
| RmvrProfileGroupCtlEntry | 1.3.6.1.4.1.259.10.1.5.1.44.22.2.1 | NA | |||||||||||
row · not-accessible · current The entry for configuring the group ranges on MVR profile. | |||||||||||||
| CmvrProfileGropuCtlProfileId | 1.3.6.1.4.1.259.10.1.5.1.44.22.2.1.1 | Integer32 | NA | ||||||||||
column · Integer32 · not-accessible · current Profile ID to index which MVR profile | |||||||||||||
| CmvrProfileGroupCtlId | 1.3.6.1.4.1.259.10.1.5.1.44.22.2.1.2 | Integer32 | NA | ||||||||||
column · Integer32 · not-accessible · current Profile ID to index which group range in MVR profile | |||||||||||||
| CmvrProfileGroupStartIPAddress | 1.3.6.1.4.1.259.10.1.5.1.44.22.2.1.3 | IpAddress | RW | ||||||||||
column · IpAddress · read-write · current MVR Profile range start IP address. NOTE: All mvrProfileGroupCtlEntry use the same buffer to temply store the mvrProfileStartIPAddress before mvrProfileGroupCtlAction really creat the group rang on profile. | |||||||||||||
| CmvrProfileGroupEndIPAddress | 1.3.6.1.4.1.259.10.1.5.1.44.22.2.1.4 | IpAddress | RW | ||||||||||
column · IpAddress · read-write · current MVR Profile range end IP address. NOTE: All mvrProfileGroupCtlEntry use the same buffer to temply store the mvrProfileEndIPAddress before mvrProfileGroupCtlAction really creat the group rang on profile. | |||||||||||||
| CmvrProfileGroupCtlAction | 1.3.6.1.4.1.259.10.1.5.1.44.22.2.1.5 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Set this object to create(2) to create group range. Set this object to destory(3) to delete group range. When the action is complete, this object becomes noAction(1).
| |||||||||||||
| TmvrDomainAssociatedProfileTable | 1.3.6.1.4.1.259.10.1.5.1.44.23 | NA | |||||||||||
table · not-accessible · current Configure MVR domain associate which MVR profile | |||||||||||||
| RmvrDomainAssociatedProfileEntry | 1.3.6.1.4.1.259.10.1.5.1.44.23.1 | NA | |||||||||||
row · not-accessible · current The entry for configuring MVR domain associate MVR profile.
| |||||||||||||
| CmvrProfileDomainId | 1.3.6.1.4.1.259.10.1.5.1.44.23.1.1 | Integer32 (1..5) | NA | ||||||||||
column · Integer32 (1..5) · not-accessible · current Profile ID to index which MVR profile | |||||||||||||
| CmvrProfileId | 1.3.6.1.4.1.259.10.1.5.1.44.23.1.2 | Integer32 | NA | ||||||||||
column · Integer32 · not-accessible · current Profile ID to index which MVR profile | |||||||||||||
| CmvrProfileAction | 1.3.6.1.4.1.259.10.1.5.1.44.23.1.3 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Set this object to create(2) to associate profile. Set this object to destory(3) to deassociate profile. When the action is complete, this object becomes noAction(1).
| |||||||||||||
| TmvrDomainGroupStaticTable | 1.3.6.1.4.1.259.10.1.5.1.44.24 | NA | |||||||||||
table · not-accessible · current The table for configuring the static members of the MVR group. | |||||||||||||
| RmvrDomainGroupStaticEntry | 1.3.6.1.4.1.259.10.1.5.1.44.24.1 | NA | |||||||||||
row · not-accessible · current The entry for configuring the static members of the MVR group. | |||||||||||||
| CmvrGroupStaticDomainId | 1.3.6.1.4.1.259.10.1.5.1.44.24.1.1 | Integer32 (1..5) | NA | ||||||||||
column · Integer32 (1..5) · not-accessible · current Profile ID to index which MVR profile | |||||||||||||
| CmvrDomainGroupStaticAddress | 1.3.6.1.4.1.259.10.1.5.1.44.24.1.2 | IpAddress | NA | ||||||||||
column · IpAddress · not-accessible · current The multicast address of the MVR group. | |||||||||||||
| CmvrDomainGroupStaticReceiverVlan | 1.3.6.1.4.1.259.10.1.5.1.44.24.1.3 | Integer32 (1..4093) | NA | ||||||||||
column · Integer32 (1..4093) · not-accessible · current The receiver vlan of this MVR group | |||||||||||||
| CmvrDomainGroupStaticPorts | 1.3.6.1.4.1.259.10.1.5.1.44.24.1.4 | PortList | RW | ||||||||||
column · PortList · read-write · current The set of ports configured by management in this entry. Ports entered in this list will be the static members of this MVR group. | |||||||||||||
| TmvrDomainGroupCurrentTable | 1.3.6.1.4.1.259.10.1.5.1.44.25 | NA | |||||||||||
table · not-accessible · current The table for the current members of the MVR group. | |||||||||||||
| RmvrDomainGroupCurrentEntry | 1.3.6.1.4.1.259.10.1.5.1.44.25.1 | NA | |||||||||||
row · not-accessible · current The entry for the current members of the MVR group. | |||||||||||||
| CmvrGroupCurrenDomainId | 1.3.6.1.4.1.259.10.1.5.1.44.25.1.1 | Integer32 (1..5) | NA | ||||||||||
column · Integer32 (1..5) · not-accessible · current Profile ID to index which MVR profile | |||||||||||||
| CmvrDomainGroupCurrentAddress | 1.3.6.1.4.1.259.10.1.5.1.44.25.1.2 | IpAddress | NA | ||||||||||
column · IpAddress · not-accessible · current The multicast address of the MVR group. | |||||||||||||
| CmvrDomainGroupCurrentReceiverVlan | 1.3.6.1.4.1.259.10.1.5.1.44.25.1.3 | Integer32 (1..4093) | NA | ||||||||||
column · Integer32 (1..4093) · not-accessible · current This object indicates the receiver VLAN of the MVR group. | |||||||||||||
| CmvrDomainGroupCurrentPorts | 1.3.6.1.4.1.259.10.1.5.1.44.25.1.4 | PortList | RO | ||||||||||
column · PortList · read-only · current The complete set of ports currently associated with this MVR group. | |||||||||||||
| NdhcpSnoopMgt | 1.3.6.1.4.1.259.10.1.5.1.46 | ||||||||||||
| NdhcpSnoopGlobal | 1.3.6.1.4.1.259.10.1.5.1.46.1 | ||||||||||||
| SdhcpSnoopEnable | 1.3.6.1.4.1.259.10.1.5.1.46.1.1 | EnabledStatus | RW | ||||||||||
scalar · EnabledStatus · read-write · current This object indicates whether the DHCP Snooping feature is enabled. | |||||||||||||
| SdhcpSnoopVerifyMacAddressEnable | 1.3.6.1.4.1.259.10.1.5.1.46.1.2 | EnabledStatus | RW | ||||||||||
scalar · EnabledStatus · read-write · current This object indicates whether DHCP Snooping Mac address verification is enabled. | |||||||||||||
| SdhcpSnoopInformationOptionEnable | 1.3.6.1.4.1.259.10.1.5.1.46.1.3 | EnabledStatus | RW | ||||||||||
scalar · EnabledStatus · read-write · current This object indicates whether the DHCP snooping information option(option 82) feature is enabled. | |||||||||||||
| SdhcpSnoopInformationOptionPolicy | 1.3.6.1.4.1.259.10.1.5.1.46.1.4 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current This object indicates which reforwarding policy shall be used for DHCP snooping information option(option 82). A value of drop(1) means to drop the DHCP request packet which has the information option(option 82). A value of keep(2) means to keep the existing information option(option 82) of the DHCP request packet. A value of replace(3), which is the default value, means to replace the existing information option(option 82) of the DHCP request packet.
| |||||||||||||
| SdhcpSnoopBindingsTableCtlAction | 1.3.6.1.4.1.259.10.1.5.1.46.1.5 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Set this to store(2) to store DHCP snooping binding entries to flash. Set this to clear(3) to clear DHCP snooping binding entries from flash. noAction(1) will always be obtained when reading this variable.
| |||||||||||||
| NdhcpSnoopVlan | 1.3.6.1.4.1.259.10.1.5.1.46.2 | ||||||||||||
| TdhcpSnoopVlanConfigTable | 1.3.6.1.4.1.259.10.1.5.1.46.2.1 | NA | |||||||||||
table · not-accessible · current A table contains DHCP Snooping configurations of existing VLANs. | |||||||||||||
| RdhcpSnoopVlanConfigEntry | 1.3.6.1.4.1.259.10.1.5.1.46.2.1.1 | NA | |||||||||||
row · not-accessible · current An instance contains the configuration to enable or disable DHCP Snooping at each existing VLAN.
| |||||||||||||
| CdhcpSnoopVlanIndex | 1.3.6.1.4.1.259.10.1.5.1.46.2.1.1.1 | VlanIndex | NA | ||||||||||
column · VlanIndex · not-accessible · current This object indicates the VLAN ID on which DHCP Snooping feature is configured. | |||||||||||||
| CdhcpSnoopVlanEnable | 1.3.6.1.4.1.259.10.1.5.1.46.2.1.1.2 | EnabledStatus | RW | ||||||||||
column · EnabledStatus · read-write · current This object indicates whether DHCP Snooping is enabled in this VLAN. | |||||||||||||
| NdhcpSnoopInterface | 1.3.6.1.4.1.259.10.1.5.1.46.3 | ||||||||||||
| TdhcpSnoopPortConfigTable | 1.3.6.1.4.1.259.10.1.5.1.46.3.1 | NA | |||||||||||
table · not-accessible · current A table provides the mechanism to configure the trust state of each port or trunk for DHCP Snooping purpose. | |||||||||||||
| RdhcpSnoopPortConfigEntry | 1.3.6.1.4.1.259.10.1.5.1.46.3.1.1 | NA | |||||||||||
row · not-accessible · current An instance contains the configuration to enable or disable trust state of each port or trunk for DHCP Snooping purpose.
| |||||||||||||
| CdhcpSnoopPortIfIndex | 1.3.6.1.4.1.259.10.1.5.1.46.3.1.1.1 | InterfaceIndex | NA | ||||||||||
column · InterfaceIndex · not-accessible · current The ifIndex value of the port or trunk. | |||||||||||||
| CdhcpSnoopPortTrustEnable | 1.3.6.1.4.1.259.10.1.5.1.46.3.1.1.2 | EnabledStatus | RW | ||||||||||
column · EnabledStatus · read-write · current This object indicates whether the port or trunk is trusted for DHCP Snooping purpose. | |||||||||||||
| NdhcpSnoopBindings | 1.3.6.1.4.1.259.10.1.5.1.46.4 | ||||||||||||
| TdhcpSnoopBindingsTable | 1.3.6.1.4.1.259.10.1.5.1.46.4.1 | NA | |||||||||||
table · not-accessible · current A table contains the DHCP bindings information learnt by the device. | |||||||||||||
| RdhcpSnoopBindingsEntry | 1.3.6.1.4.1.259.10.1.5.1.46.4.1.1 | NA | |||||||||||
row · not-accessible · current An instance contains the Mac address, IP address type, IP address, VLAN number, interface number, leased time and status. | |||||||||||||
| CdhcpSnoopBindingsVlanIndex | 1.3.6.1.4.1.259.10.1.5.1.46.4.1.1.1 | VlanIndex | NA | ||||||||||
column · VlanIndex · not-accessible · current This object indicates the VLAN which a DHCP client host belongs to. | |||||||||||||
| CdhcpSnoopBindingsMacAddress | 1.3.6.1.4.1.259.10.1.5.1.46.4.1.1.2 | MacAddress | NA | ||||||||||
column · MacAddress · not-accessible · current This object indicates the MAC address of a DHCP client host. | |||||||||||||
| CdhcpSnoopBindingsAddrType | 1.3.6.1.4.1.259.10.1.5.1.46.4.1.1.3 | InetAddressType | RO | ||||||||||
column · InetAddressType · read-only · current This object indicates the type of IP address denoted in dhcpSnoopBindingsIpAddress type. | |||||||||||||
| CdhcpSnoopBindingsEntryType | 1.3.6.1.4.1.259.10.1.5.1.46.4.1.1.4 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current This object indicates that this binding is obtained from dynamically learning or is a static configuraion.
| |||||||||||||
| CdhcpSnoopBindingsIpAddress | 1.3.6.1.4.1.259.10.1.5.1.46.4.1.1.5 | IpAddress | RO | ||||||||||
column · IpAddress · read-only · current This object indicates the allocated IP address of a DHCP client host. | |||||||||||||
| CdhcpSnoopBindingsPortIfIndex | 1.3.6.1.4.1.259.10.1.5.1.46.4.1.1.6 | InterfaceIndex | RO | ||||||||||
column · InterfaceIndex · read-only · current This object indicates the port or trunk where a DHCP client host connects to. | |||||||||||||
| CdhcpSnoopBindingsLeaseTime | 1.3.6.1.4.1.259.10.1.5.1.46.4.1.1.7 | Unsigned32 | RO | ||||||||||
column · Unsigned32 · read-only · current This object indicates the leased time of this DHCP bindings. | |||||||||||||
| NdhcpSnoopStatistics | 1.3.6.1.4.1.259.10.1.5.1.46.5 | ||||||||||||
| SdhcpSnoopTotalForwardedPkts | 1.3.6.1.4.1.259.10.1.5.1.46.5.1 | Counter32 | RO | ||||||||||
scalar · Counter32 · read-only · current Indicates the total number of packets subjected to DHCP Snooping is forwarded. | |||||||||||||
| SdhcpSnoopUntrustedPortDroppedPkts | 1.3.6.1.4.1.259.10.1.5.1.46.5.3 | Counter32 | RO | ||||||||||
scalar · Counter32 · read-only · current Indicates the number of packets subjected to DHCP Snooping is dropped because they come from untrusted interface. | |||||||||||||
| NclusterMgt | 1.3.6.1.4.1.259.10.1.5.1.47 | ||||||||||||
| SclusterEnable | 1.3.6.1.4.1.259.10.1.5.1.47.1 | EnabledStatus | RW | ||||||||||
scalar · EnabledStatus · read-write · current Enables or disables clustering on the device. | |||||||||||||
| SclusterCommanderEnable | 1.3.6.1.4.1.259.10.1.5.1.47.2 | EnabledStatus | RW | ||||||||||
scalar · EnabledStatus · read-write · current Enables or disables the device as commander in a cluster. | |||||||||||||
| SclusterIpPool | 1.3.6.1.4.1.259.10.1.5.1.47.4 | IpAddress | RW | ||||||||||
scalar · IpAddress · read-write · current The start internal IP address of a cluster pool. | |||||||||||||
| SclusterClearCandidateTable | 1.3.6.1.4.1.259.10.1.5.1.47.5 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Setting this object to clear(2) starts to clear the candidate table.
| |||||||||||||
| SclusterRole | 1.3.6.1.4.1.259.10.1.5.1.47.6 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current The current role of the device in a cluster.
commander(1) : The switch is the controlling device in a
cluster.
candidate(2) : The switch has been discovered by the commander,
but it has not been manually configured
for access from the commander.
activeMember(3): The switch has been manually configured for access
from the commander and it is active
in the cluster.
disabled(5) : The switch has clustering disabled.
| |||||||||||||
| SclusterMemberCount | 1.3.6.1.4.1.259.10.1.5.1.47.7 | Counter32 | RO | ||||||||||
scalar · Counter32 · read-only · current The total number of members in a cluster. | |||||||||||||
| SclusterCandidateCount | 1.3.6.1.4.1.259.10.1.5.1.47.8 | Counter32 | RO | ||||||||||
scalar · Counter32 · read-only · current The total number of candidates in a cluster. | |||||||||||||
| TclusterCandidateTable | 1.3.6.1.4.1.259.10.1.5.1.47.9 | NA | |||||||||||
table · not-accessible · current A table listing cluster candidates. | |||||||||||||
| RclusterCandidateEntry | 1.3.6.1.4.1.259.10.1.5.1.47.9.1 | NA | |||||||||||
row · not-accessible · current A conceptual row containing the information of the candidate. | |||||||||||||
| CclusterCandidateMacAddr | 1.3.6.1.4.1.259.10.1.5.1.47.9.1.1 | MacAddress | NA | ||||||||||
column · MacAddress · not-accessible · current The MAC address of the candidate. | |||||||||||||
| CclusterCandidateDesc | 1.3.6.1.4.1.259.10.1.5.1.47.9.1.3 | DisplayString (SIZE (0..42)) | RO | ||||||||||
column · DisplayString (SIZE (0..42)) · read-only · current The description of the candidate. | |||||||||||||
| CclusterCandidateRole | 1.3.6.1.4.1.259.10.1.5.1.47.9.1.4 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current The role of the candidate.
candidate(2) : The switch is discovered by the commander,
but it has not been manually configured for
access from the commander.
activeMember(3) : The switch is manually configured for access
from the commander and it is active in the
cluster.
inactiveMember(4): The switch is manually configured for access
from the commander, but it is inactive in
the cluster.
| |||||||||||||
| TclusterMemberTable | 1.3.6.1.4.1.259.10.1.5.1.47.10 | NA | |||||||||||
table · not-accessible · current A table listing clustering members. | |||||||||||||
| RclusterMemberEntry | 1.3.6.1.4.1.259.10.1.5.1.47.10.1 | NA | |||||||||||
row · not-accessible · current A conceptual row containing the information of the member.
| |||||||||||||
| CclusterMemberId | 1.3.6.1.4.1.259.10.1.5.1.47.10.1.1 | Unsigned32 | NA | ||||||||||
column · Unsigned32 · not-accessible · current The ID of the member. | |||||||||||||
| CclusterMemberMacAddr | 1.3.6.1.4.1.259.10.1.5.1.47.10.1.2 | MacAddress | RO | ||||||||||
column · MacAddress · read-only · current The MAC address of the member. | |||||||||||||
| CclusterMemberDesc | 1.3.6.1.4.1.259.10.1.5.1.47.10.1.3 | DisplayString (SIZE (0..42)) | RO | ||||||||||
column · DisplayString (SIZE (0..42)) · read-only · current The description of the member. | |||||||||||||
| CclusterMemberActive | 1.3.6.1.4.1.259.10.1.5.1.47.10.1.4 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current The active status of the member.
activeMember(3) : The switch is manually configured for access
from the commander and it is active in the
cluster.
inactiveMember(4): The switch is manually configured for access
from the commander, but it is inactive in
the cluster.
| |||||||||||||
| NclusterMemberAddCtl | 1.3.6.1.4.1.259.10.1.5.1.47.11 | ||||||||||||
| SclusterMemberAddCtlMacAddr | 1.3.6.1.4.1.259.10.1.5.1.47.11.1 | MacAddress | RW | ||||||||||
scalar · MacAddress · read-write · current The MAC address of the device associated with clusterMemberAddCtlAction. | |||||||||||||
| SclusterMemberAddCtlId | 1.3.6.1.4.1.259.10.1.5.1.47.11.2 | Unsigned32 | RW | ||||||||||
scalar · Unsigned32 · read-write · current The member id associated with clusterMemberAddCtlAction. | |||||||||||||
| SclusterMemberAddCtlAction | 1.3.6.1.4.1.259.10.1.5.1.47.11.5 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Adds the device to members that can be accessed from the commander. The MAC of the device is the current value of clusterMemberAddCtlMacAddr and the assigned member ID is the current value of clusterMemberAddCtlId. Set this object to add(2) to begin adding the member.
| |||||||||||||
| NclusterMemberRemoveCtl | 1.3.6.1.4.1.259.10.1.5.1.47.12 | ||||||||||||
| SclusterMemberRemoveCtlId | 1.3.6.1.4.1.259.10.1.5.1.47.12.1 | Unsigned32 | RW | ||||||||||
scalar · Unsigned32 · read-write · current The member ID associated with clusterMemberRemoveCtlAction. | |||||||||||||
| SclusterMemberRemoveCtlAction | 1.3.6.1.4.1.259.10.1.5.1.47.12.2 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Removes the device from members that can be accessed from the commander. The member ID is the current value of clusterMemberRemoveCtlId. Set this object to remove(2) to begin removing the member.
| |||||||||||||
| NipSrcGuardMgt | 1.3.6.1.4.1.259.10.1.5.1.48 | ||||||||||||
| TipSrcGuardConfigTable | 1.3.6.1.4.1.259.10.1.5.1.48.1 | NA | |||||||||||
table · not-accessible · current A table contains the configurations to enable or disable IP Source Guard at each port or trunk. | |||||||||||||
| RipSrcGuardConfigEntry | 1.3.6.1.4.1.259.10.1.5.1.48.1.1 | NA | |||||||||||
row · not-accessible · current An instance contains the configuration to enable or disable IP Source Guard at each port or trunk. | |||||||||||||
| CipSrcGuardPortIfIndex | 1.3.6.1.4.1.259.10.1.5.1.48.1.1.1 | InterfaceIndex | NA | ||||||||||
column · InterfaceIndex · not-accessible · current This object idents the port or trunk which is capable of IP Source Guard feature. | |||||||||||||
| CipSrcGuardMode | 1.3.6.1.4.1.259.10.1.5.1.48.1.1.2 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current This object indicates whether Ip Source Guard is enabled at this interface. If the value equals 0, it means Ip Source Guard is disabled. If the value equals 1, it means Ip Source Guard is enabled, and packets are filtered by checking source ip. If the value equals 2, it means Ip Source Guard is enabled and packets are filtered by checking source ip and source mac.
| |||||||||||||
| TipSrcGuardAddrTable | 1.3.6.1.4.1.259.10.1.5.1.48.2 | NA | |||||||||||
table · not-accessible · current A table contains the IP Source Guard bindings information learnt by the device. | |||||||||||||
| RipSrcGuardAddrEntry | 1.3.6.1.4.1.259.10.1.5.1.48.2.1 | NA | |||||||||||
row · not-accessible · current An instance contains the Mac address, IP address type, IP address, VLAN number, interface number, leased time and status. | |||||||||||||
| CipSrcGuardBindingsVlanIndex | 1.3.6.1.4.1.259.10.1.5.1.48.2.1.1 | VlanIndex | NA | ||||||||||
column · VlanIndex · not-accessible · current This object indicates the VLAN which a DHCP client host belongs to. | |||||||||||||
| CipSrcGuardBindingsMacAddress | 1.3.6.1.4.1.259.10.1.5.1.48.2.1.2 | MacAddress | NA | ||||||||||
column · MacAddress · not-accessible · current This object indicates the MAC address of a DHCP client host. | |||||||||||||
| CipSrcGuardBindingsAddrType | 1.3.6.1.4.1.259.10.1.5.1.48.2.1.3 | InetAddressType | RC | ||||||||||
column · InetAddressType · read-create · current This object indicates the type of IP address denoted in ipSrcGuardBindingsIpAddress type. | |||||||||||||
| CipSrcGuardBindingsEntryType | 1.3.6.1.4.1.259.10.1.5.1.48.2.1.4 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current This object indicates that this binding is obtained from dynamically learning or is a static configuraion.
| |||||||||||||
| CipSrcGuardBindingsIpAddress | 1.3.6.1.4.1.259.10.1.5.1.48.2.1.5 | IpAddress | RC | ||||||||||
column · IpAddress · read-create · current This object indicates the allocated IP address of a DHCP client host. | |||||||||||||
| CipSrcGuardBindingsPortIfIndex | 1.3.6.1.4.1.259.10.1.5.1.48.2.1.6 | InterfaceIndex | RC | ||||||||||
column · InterfaceIndex · read-create · current This object indicates the port or trunk where a DHCP client host connects to. | |||||||||||||
| CipSrcGuardBindingsLeaseTime | 1.3.6.1.4.1.259.10.1.5.1.48.2.1.7 | Unsigned32 | RO | ||||||||||
column · Unsigned32 · read-only · current This object indicates the leased time of this DHCP bindings. | |||||||||||||
| CipSrcGuardBindingsStatus | 1.3.6.1.4.1.259.10.1.5.1.48.2.1.8 | RowStatus | RC | ||||||||||
column · RowStatus · read-create · current The status of this conceptual row entry. This object issued to manage the creation and deletion of conceptual rows. The status column has six defined values: - 'active', which indicates that the conceptual row is available for use by the managed device; - 'notInService', which indicates that the conceptual row exists in the agent, but is unavailable for use by the managed device. | |||||||||||||
| NoamMgt | 1.3.6.1.4.1.259.10.1.5.1.52 | ||||||||||||
| ToamPortClearStatTable | 1.3.6.1.4.1.259.10.1.5.1.52.3 | NA | |||||||||||
table · not-accessible · current A table contains the information of clear OAM statistics at each port. | |||||||||||||
| RoamPortClearStatEntry | 1.3.6.1.4.1.259.10.1.5.1.52.3.1 | NA | |||||||||||
row · not-accessible · current An entry contains the information of clear OAM statistics at each port. | |||||||||||||
| CoamPortClearStatIndex | 1.3.6.1.4.1.259.10.1.5.1.52.3.1.1 | InterfaceIndex | NA | ||||||||||
column · InterfaceIndex · not-accessible · current This object shows the ifIndex value of the port excluding trunk. | |||||||||||||
| CoamClearStatistics | 1.3.6.1.4.1.259.10.1.5.1.52.3.1.2 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current This variable is used to clear the counters for OAM. Set this variable to clear(2) to perform the clear operation, noClear(1) will always be displayed when reading this variable.
| |||||||||||||
| NmldSnoopMgt | 1.3.6.1.4.1.259.10.1.5.1.54 | ||||||||||||
| SmldSnoopStatus | 1.3.6.1.4.1.259.10.1.5.1.54.1 | EnabledStatus | RW | ||||||||||
scalar · EnabledStatus · read-write · current Parameter to enable or disable MLD snooping on the device. When enabled, the device will examine MLD packets and set up filters for MLD ports. | |||||||||||||
| SmldSnoopQuerier | 1.3.6.1.4.1.259.10.1.5.1.54.2 | EnabledStatus | RW | ||||||||||
scalar · EnabledStatus · read-write · current Enables (disables) whether the switch acts as an MLD querier. | |||||||||||||
| SmldSnoopRobustness | 1.3.6.1.4.1.259.10.1.5.1.54.3 | Integer32 (2..10) | RW | ||||||||||
scalar · Integer32 (2..10) · read-write · current The Robustness Variable allows tuning for the expected packet loss on a subnet. If a subnet is expected to be lossy, the Robustness Variable may be increased. MLD is robust to (Robustness Variable-1) packet losses. The discussion of the Robustness Variable is in Section 7.1 of RFC 2710. | |||||||||||||
| SmldSnoopQueryInterval | 1.3.6.1.4.1.259.10.1.5.1.54.4 | Integer32 (60..125) | RW | ||||||||||
scalar · Integer32 (60..125) · read-write · current The interval (in seconds) between MLD host-query messages sent by the switch. | |||||||||||||
| SmldSnoopQueryMaxResponseTime | 1.3.6.1.4.1.259.10.1.5.1.54.5 | Integer32 (5..25) | RW | ||||||||||
scalar · Integer32 (5..25) · read-write · current The time after a query, during which a response is expected from an endstation. If a querier has sent a number of queries defined by mldSnoopRobustness, but an endstation has not responded, a countdown timer is started using an initial value set by mldSnoopQueryMaxResponseTime. If the countdown finishes, and the endstation still has not responded, then that the endstation is deemed to have left the multicast group. | |||||||||||||
| SmldSnoopRouterPortExpireTime | 1.3.6.1.4.1.259.10.1.5.1.54.6 | Integer32 (300..500) | RW | ||||||||||
scalar · Integer32 (300..500) · read-write · current Sets the time (in seconds) the switch waits after the previous querier has stopped querying before the router port (which received query packets from previous querier) expires. | |||||||||||||
| SmldSnoopVersion | 1.3.6.1.4.1.259.10.1.5.1.54.7 | Integer32 (1..2) | RW | ||||||||||
scalar · Integer32 (1..2) · read-write · current MLD version snooped | |||||||||||||
| SmldSnoopUnknownMcastMode | 1.3.6.1.4.1.259.10.1.5.1.54.8 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Sets the mldSnoopUnknownMcastMode to define the flooding behavior when receive the unknown multicast traffic.
| |||||||||||||
| TmldSnoopRouterCurrentTable | 1.3.6.1.4.1.259.10.1.5.1.54.9 | NA | |||||||||||
table · not-accessible · current Table for current router ports. | |||||||||||||
| RmldSnoopRouterCurrentEntry | 1.3.6.1.4.1.259.10.1.5.1.54.9.1 | NA | |||||||||||
| CmldSnoopRouterCurrentVlanIndex | 1.3.6.1.4.1.259.10.1.5.1.54.9.1.1 | Unsigned32 | NA | ||||||||||
column · Unsigned32 · not-accessible · current The interface identified by a particular value of this index is the same interface as identified by the same value of dot1qVlanIndex in the Q-BRIDGE-MIB. The entry will only appear here after a configure to mldSnoopRouterStaticTable. | |||||||||||||
| CmldSnoopRouterCurrentPorts | 1.3.6.1.4.1.259.10.1.5.1.54.9.1.2 | PortList | RO | ||||||||||
column · PortList · read-only · current The set of ports which are current router ports, including static router ports. Please refer to mldSnoopRouterStaticTable. | |||||||||||||
| TmldSnoopRouterStaticTable | 1.3.6.1.4.1.259.10.1.5.1.54.10 | NA | |||||||||||
table · not-accessible · current Table for static router ports. | |||||||||||||
| RmldSnoopRouterStaticEntry | 1.3.6.1.4.1.259.10.1.5.1.54.10.1 | NA | |||||||||||
| CmldSnoopRouterStaticVlanIndex | 1.3.6.1.4.1.259.10.1.5.1.54.10.1.1 | Unsigned32 | NA | ||||||||||
column · Unsigned32 · not-accessible · current The interface identified by a particular value of this index is the same interface as identified by the same value of dot1qVlanIndex in the Q-BRIDGE-MIB. The entry will only appear here after a configure to mldSnoopRouterStaticTable. | |||||||||||||
| CmldSnoopRouterStaticPorts | 1.3.6.1.4.1.259.10.1.5.1.54.10.1.2 | PortList | RC | ||||||||||
column · PortList · read-create · current The set of ports which are static router ports. | |||||||||||||
| TmldSnoopMulticastCurrentTable | 1.3.6.1.4.1.259.10.1.5.1.54.11 | NA | |||||||||||
table · not-accessible · current Table for current multicast addresses. | |||||||||||||
| RmldSnoopMulticastCurrentEntry | 1.3.6.1.4.1.259.10.1.5.1.54.11.1 | NA | |||||||||||
row · not-accessible · current Entry for current multicast addresses. | |||||||||||||
| CmldSnoopMulticastCurrentVlanIndex | 1.3.6.1.4.1.259.10.1.5.1.54.11.1.1 | Unsigned32 | NA | ||||||||||
column · Unsigned32 · not-accessible · current The interface identified by a particular value of this index is the same interface as identified by the same value of dot1qVlanIndex in the Q-BRIDGE-MIB. The entry will only appear here after a configure to mldSnoopMulticastStaticTable. | |||||||||||||
| CmldSnoopMulticastCurrentIpAddress | 1.3.6.1.4.1.259.10.1.5.1.54.11.1.2 | InetAddressIPv6 | NA | ||||||||||
column · InetAddressIPv6 · not-accessible · current IPv6 address of multicast group. | |||||||||||||
| CmldSnoopMulticastCurrentPorts | 1.3.6.1.4.1.259.10.1.5.1.54.11.1.3 | PortList | RO | ||||||||||
column · PortList · read-only · current The set of ports which are members of a multicast group, including static members. Please refer to mldSnoopMulticastStaticTable. | |||||||||||||
| TmldSnoopMulticastStaticTable | 1.3.6.1.4.1.259.10.1.5.1.54.12 | NA | |||||||||||
table · not-accessible · current Table for static multicast addresses. | |||||||||||||
| RmldSnoopMulticastStaticEntry | 1.3.6.1.4.1.259.10.1.5.1.54.12.1 | NA | |||||||||||
row · not-accessible · current Entry for static multicast addresses. | |||||||||||||
| CmldSnoopMulticastStaticVlanIndex | 1.3.6.1.4.1.259.10.1.5.1.54.12.1.1 | Unsigned32 | NA | ||||||||||
column · Unsigned32 · not-accessible · current The interface identified by a particular value of this index is the same interface as identified by the same value of dot1qVlanIndex in the Q-BRIDGE-MIB. The entry will only appear here after a configure to mldSnoopMulticastStaticTable. | |||||||||||||
| CmldSnoopMulticastStaticIpAddress | 1.3.6.1.4.1.259.10.1.5.1.54.12.1.2 | InetAddressIPv6 | NA | ||||||||||
column · InetAddressIPv6 · not-accessible · current IPv6 address of multicast group. | |||||||||||||
| CmldSnoopMulticastStaticPorts | 1.3.6.1.4.1.259.10.1.5.1.54.12.1.3 | PortList | RC | ||||||||||
column · PortList · read-create · current The set of ports which are members. | |||||||||||||
| TmldSnoopCurrentVlanTable | 1.3.6.1.4.1.259.10.1.5.1.54.13 | NA | |||||||||||
table · not-accessible · current Table for configuring MLD snooping for each VLAN which exists in the device by (local or network) management, or dynamically created as a result of GVRP requests received. | |||||||||||||
| RmldSnoopCurrentVlanEntry | 1.3.6.1.4.1.259.10.1.5.1.54.13.1 | NA | |||||||||||
| CmldSnoopCurrentVlanIndex | 1.3.6.1.4.1.259.10.1.5.1.54.13.1.1 | Unsigned32 | NA | ||||||||||
column · Unsigned32 · not-accessible · current Same is dot1qVlanIndex in the Q-BRIDGE-MIB. This table has only one entry - the entry for the VLAN of the management interface. | |||||||||||||
| CmldSnoopCurrentVlanImmediateLeave | 1.3.6.1.4.1.259.10.1.5.1.54.13.1.2 | EnabledStatus | RW | ||||||||||
column · EnabledStatus · read-write · current The parameter to enable or disable the Immediate-Leave feature on this VLAN. | |||||||||||||
| NsFlowMgt | 1.3.6.1.4.1.259.10.1.5.1.55 | ||||||||||||
| TsFlowPortTable | 1.3.6.1.4.1.259.10.1.5.1.55.2 | NA | |||||||||||
table · not-accessible · current A table that contains the settings of sFlow. | |||||||||||||
| RsFlowPortEntry | 1.3.6.1.4.1.259.10.1.5.1.55.2.1 | NA | |||||||||||
| CsFlowPortIndex | 1.3.6.1.4.1.259.10.1.5.1.55.2.1.1 | Integer32 | NA | ||||||||||
column · Integer32 · not-accessible · current The port number of a port. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex in the IF-MIB. | |||||||||||||
| CsFlowPortStatus | 1.3.6.1.4.1.259.10.1.5.1.55.2.1.2 | EnabledStatus | RC | ||||||||||
column · EnabledStatus · read-create · current Set this to enabled(1) to enable sFlow on this port, and set this to disabled(2) to disable sFlow on this port. | |||||||||||||
| NdynamicArpInspectionMgt | 1.3.6.1.4.1.259.10.1.5.1.56 | ||||||||||||
| NdaiGlobal | 1.3.6.1.4.1.259.10.1.5.1.56.1 | ||||||||||||
| SdaiGlobalStatus | 1.3.6.1.4.1.259.10.1.5.1.56.1.1 | EnabledStatus | RW | ||||||||||
scalar · EnabledStatus · read-write · current Set enabled(1) to enable dynamic ARP inspection. Set disabled(2) to disable dynamic ARP inspection. | |||||||||||||
| SdaiGlobalSrcMacValidation | 1.3.6.1.4.1.259.10.1.5.1.56.1.2 | EnabledStatus | RW | ||||||||||
scalar · EnabledStatus · read-write · current Set enabled(1) to enable validation of source MAC address. Set disabled(2) to disable validation of source MAC address. | |||||||||||||
| SdaiGlobalDestMacValidation | 1.3.6.1.4.1.259.10.1.5.1.56.1.3 | EnabledStatus | RW | ||||||||||
scalar · EnabledStatus · read-write · current Set enabled(1) to enable validation of destination MAC address. Set disabled(2) to disable validation of destination MAC address. | |||||||||||||
| SdaiGlobalIpAddrValidation | 1.3.6.1.4.1.259.10.1.5.1.56.1.4 | EnabledStatus | RW | ||||||||||
scalar · EnabledStatus · read-write · current Set enabled(1) to enable validation of IP address. Set disabled(2) to disable validation of IP address. | |||||||||||||
| SdaiGlobalLogNumber | 1.3.6.1.4.1.259.10.1.5.1.56.1.5 | Integer32 (0..256) | RW | ||||||||||
scalar · Integer32 (0..256) · read-write · current The number of log buffers for saving log message. The value 0 means not generating system messages. | |||||||||||||
| SdaiGlobalLogInterval | 1.3.6.1.4.1.259.10.1.5.1.56.1.6 | Integer32 (0..86400) | RW | ||||||||||
scalar · Integer32 (0..86400) · read-write · current The value of the time interval for saving log messages. | |||||||||||||
| SdaiGlobalAdditionalValidStatus | 1.3.6.1.4.1.259.10.1.5.1.56.1.7 | EnabledStatus | RO | ||||||||||
scalar · EnabledStatus · read-only · current The vaule of this object is disabled(2) when the status of daiGlobalSrcMacValidation, daiGlobalDestMacValidation, and daiGlobalIpAddrValidation are disabled; enabled(1) when one or more of these variables are enabled. | |||||||||||||
| NdaiVlan | 1.3.6.1.4.1.259.10.1.5.1.56.2 | ||||||||||||
| TdaiVlanTable | 1.3.6.1.4.1.259.10.1.5.1.56.2.1 | NA | |||||||||||
table · not-accessible · current A table contains dynamic ARP inspection configurations for existing VLANs. | |||||||||||||
| RdaiVlanEntry | 1.3.6.1.4.1.259.10.1.5.1.56.2.1.1 | NA | |||||||||||
row · not-accessible · current An instance containing the configuration of dynamic ARP inspection for each existing VLAN.
| |||||||||||||
| CdaiVlanIndex | 1.3.6.1.4.1.259.10.1.5.1.56.2.1.1.1 | VlanIndex | NA | ||||||||||
column · VlanIndex · not-accessible · current This object indicates the VLAN ID on which dynamic ARP inspection is configured. | |||||||||||||
| CdaiVlanStatus | 1.3.6.1.4.1.259.10.1.5.1.56.2.1.1.2 | EnabledStatus | RW | ||||||||||
column · EnabledStatus · read-write · current This object indicates whether dynamic ARP inspection is enabled in this VLAN. | |||||||||||||
| CdaiVlanArpAclName | 1.3.6.1.4.1.259.10.1.5.1.56.2.1.1.3 | DisplayString (SIZE (0..15)) | RW | ||||||||||
column · DisplayString (SIZE (0..15)) · read-write · current Specifies the ARP ACL name bound to the interface. The default value of daiVlanArpAclStatus is dynamic(2). | |||||||||||||
| CdaiVlanArpAclStatus | 1.3.6.1.4.1.259.10.1.5.1.56.2.1.1.4 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Set to static(1) means packets not matching the ACL are dropped. Set to dynamic(2) means packets not matching the ACL are validated by the DHCP snooping binding table. When daiVlanArpAclName is configured, the default value of daiVlanArpAclStatus is dynamic(2).
| |||||||||||||
| NdaiInterface | 1.3.6.1.4.1.259.10.1.5.1.56.3 | ||||||||||||
| TdaiPortTable | 1.3.6.1.4.1.259.10.1.5.1.56.3.1 | NA | |||||||||||
table · not-accessible · current A table containing dynamic ARP inspection configurations for port interfaces. | |||||||||||||
| RdaiPortEntry | 1.3.6.1.4.1.259.10.1.5.1.56.3.1.1 | NA | |||||||||||
row · not-accessible · current An instance containing the configuration of dynamic ARP inspection at each port interface.
| |||||||||||||
| CdaiPortIfIndex | 1.3.6.1.4.1.259.10.1.5.1.56.3.1.1.1 | InterfaceIndex | NA | ||||||||||
column · InterfaceIndex · not-accessible · current The ifIndex value of the port. | |||||||||||||
| CdaiPortTrustStatus | 1.3.6.1.4.1.259.10.1.5.1.56.3.1.1.2 | EnabledStatus | RW | ||||||||||
column · EnabledStatus · read-write · current This object indicates whether the port is trusted for dynamic ARP inspection. | |||||||||||||
| CdaiPortRateLimit | 1.3.6.1.4.1.259.10.1.5.1.56.3.1.1.3 | Unsigned32 (0..2048 | 4294967295) | RW | ||||||||||
column · Unsigned32 (0..2048 | 4294967295) · read-write · current The value of rate limit threshold per second of disposing ARP messages. Set the value 0xFFFFFFFF as no rate limit. | |||||||||||||
| NdaiLog | 1.3.6.1.4.1.259.10.1.5.1.56.4 | ||||||||||||
| TdaiLogTable | 1.3.6.1.4.1.259.10.1.5.1.56.4.1 | NA | |||||||||||
table · not-accessible · current A table containing dynamic ARP inspection log information. | |||||||||||||
| RdaiLogEntry | 1.3.6.1.4.1.259.10.1.5.1.56.4.1.1 | NA | |||||||||||
row · not-accessible · current An instance containing log information of dynamic ARP inspection at each VLAN interface.
| |||||||||||||
| CdaiLogIndex | 1.3.6.1.4.1.259.10.1.5.1.56.4.1.1.1 | Integer32 | NA | ||||||||||
column · Integer32 · not-accessible · current This object indicates the index of dynamic ARP inspection log information. | |||||||||||||
| CdaiLogVlan | 1.3.6.1.4.1.259.10.1.5.1.56.4.1.1.2 | VlanIndex | RO | ||||||||||
column · VlanIndex · read-only · current This object indicates the VLAN ID of dynamic ARP inspection log information. | |||||||||||||
| CdaiLogPort | 1.3.6.1.4.1.259.10.1.5.1.56.4.1.1.3 | InterfaceIndex | RO | ||||||||||
column · InterfaceIndex · read-only · current This object indicates the ifIndex of dynamic ARP inspection log information. | |||||||||||||
| CdaiLogSrcIpAddress | 1.3.6.1.4.1.259.10.1.5.1.56.4.1.1.4 | IpAddress | RO | ||||||||||
column · IpAddress · read-only · current The source IP address of dynamic ARP inspection log information. | |||||||||||||
| CdaiLogDestIpAddress | 1.3.6.1.4.1.259.10.1.5.1.56.4.1.1.5 | IpAddress | RO | ||||||||||
column · IpAddress · read-only · current The destination IP address of dynamic ARP inspection log information. | |||||||||||||
| CdaiLogSrcMacAddress | 1.3.6.1.4.1.259.10.1.5.1.56.4.1.1.6 | MacAddress | RO | ||||||||||
column · MacAddress · read-only · current The source MAC address of dynamic ARP inspection log information. | |||||||||||||
| CdaiLogDestMacAddress | 1.3.6.1.4.1.259.10.1.5.1.56.4.1.1.7 | MacAddress | RO | ||||||||||
column · MacAddress · read-only · current The destination MAC address of dynamic ARP inspection log information. | |||||||||||||
| NdaiStatistics | 1.3.6.1.4.1.259.10.1.5.1.56.5 | ||||||||||||
| SdaiTotalReceivedPkts | 1.3.6.1.4.1.259.10.1.5.1.56.5.1 | Counter32 | RO | ||||||||||
scalar · Counter32 · read-only · current Indicates the total number of ARP packets received before rate limiting. | |||||||||||||
| SdaiTotalDroppedPkts | 1.3.6.1.4.1.259.10.1.5.1.56.5.2 | Counter32 | RO | ||||||||||
scalar · Counter32 · read-only · current Indicates the total number of ARP packets dropped due to rate limt. | |||||||||||||
| SdaiTotalProcessedPkts | 1.3.6.1.4.1.259.10.1.5.1.56.5.3 | Counter32 | RO | ||||||||||
scalar · Counter32 · read-only · current Indicates the total number of ARP packets processed by ARP inspection. | |||||||||||||
| SdaiTotalSrcMacDroppedPkts | 1.3.6.1.4.1.259.10.1.5.1.56.5.4 | Counter32 | RO | ||||||||||
scalar · Counter32 · read-only · current Indicates the total number of ARP packets dropped by source MAC address validation. | |||||||||||||
| SdaiTotalDestMacDroppedPkts | 1.3.6.1.4.1.259.10.1.5.1.56.5.5 | Counter32 | RO | ||||||||||
scalar · Counter32 · read-only · current Indicates the total number of ARP packets dropped by destination MAC address validation. | |||||||||||||
| SdaiTotalIpAddrDroppedPkts | 1.3.6.1.4.1.259.10.1.5.1.56.5.6 | Counter32 | RO | ||||||||||
scalar · Counter32 · read-only · current Indicates the total number of ARP packets dropped by IP address validation. | |||||||||||||
| SdaiTotalArpAclDroppedPkts | 1.3.6.1.4.1.259.10.1.5.1.56.5.7 | Counter32 | RO | ||||||||||
scalar · Counter32 · read-only · current Indicates the total number of ARP packets dropped by ARP ACL. | |||||||||||||
| SdaiTotalDhcpSnoopingDroppedPkts | 1.3.6.1.4.1.259.10.1.5.1.56.5.8 | Counter32 | RO | ||||||||||
scalar · Counter32 · read-only · current Indicates the total number of ARP packets dropped by DHCP snooping. | |||||||||||||
| NudpHelperMgt | 1.3.6.1.4.1.259.10.1.5.1.58 | ||||||||||||
| SudpHelperStatus | 1.3.6.1.4.1.259.10.1.5.1.58.1 | EnabledStatus | RW | ||||||||||
scalar · EnabledStatus · read-write · current Set this variable to enabled(1) to enable UDP helper. Set this variable to disabled(2) to disable UDP helper. | |||||||||||||
| TudpHelperForwardProtocolTable | 1.3.6.1.4.1.259.10.1.5.1.58.2 | NA | |||||||||||
table · not-accessible · current To specify which UDP ports the switch forwards when forwarding UDP broadcast packets. | |||||||||||||
| RudpHelperForwardProtocolEntry | 1.3.6.1.4.1.259.10.1.5.1.58.2.1 | NA | |||||||||||
row · not-accessible · current A conceptual row of udpHelperForwardProtocolTable. | |||||||||||||
| CudpHelperForwardProtocolPort | 1.3.6.1.4.1.259.10.1.5.1.58.2.1.1 | Integer32 (1..65535) | NA | ||||||||||
column · Integer32 (1..65535) · not-accessible · current The port number of the UDP protocol. Adding a helper address by udpHelperInetAddrTable causes the software to forward UDP broadcast packets. By this table, you can specify exactly which types of UDP broadcast packets you would like to have forwarded. | |||||||||||||
| CudpHelperForwardProtocolStatus | 1.3.6.1.4.1.259.10.1.5.1.58.2.1.2 | ValidStatus | RC | ||||||||||
column · ValidStatus · read-create · current Set this variable to valid(1) to enable forwarding of packets. Set this variable to invalid(2) to disable forwarding of packets. | |||||||||||||
| TudpHelperInetAddrTable | 1.3.6.1.4.1.259.10.1.5.1.58.3 | NA | |||||||||||
table · not-accessible · current To forward UDP broadcasts, including BOOTP, received on an interface. After configuring an UDP helper address on an interface, the UDP broadcast packets on this network to which this interface is attached will be sent to the helper. Combined with the configuration of udpHelperForwardProtocolTable, it allows you to control which kind of broadcast packets can be forwarded. One common application that requires helper addresses is Dynamic Host Configuration Protocol (DHCP), which is defined in RFC 1531. To enable BOOTP or DHCP broadcast forwarding for a set of clients, configure a helper address on the router interface connected to the client. The helper address should specify the address of the BOOTP or DHCP server. If you have multiple servers, you can configure one helper address for each server. | |||||||||||||
| RudpHelperInetAddrEntry | 1.3.6.1.4.1.259.10.1.5.1.58.3.1 | NA | |||||||||||
row · not-accessible · current A conceptual row of udpHelperInetAddrTable. | |||||||||||||
| CudpHelperInetAddrVlanIndex | 1.3.6.1.4.1.259.10.1.5.1.58.3.1.1 | VlanIndex | NA | ||||||||||
column · VlanIndex · not-accessible · current The VLAN-ID or other identifier refering to this VLAN. Based on dot1qVlanIndex in the Q-BRIDGE-MIB. | |||||||||||||
| CudpHelperInetAddrType | 1.3.6.1.4.1.259.10.1.5.1.58.3.1.2 | InetAddressType | NA | ||||||||||
column · InetAddressType · not-accessible · current The address type of the helper address. | |||||||||||||
| CudpHelperInetAddr | 1.3.6.1.4.1.259.10.1.5.1.58.3.1.3 | InetAddress | NA | ||||||||||
column · InetAddress · not-accessible · current The Internet address of the helper address. | |||||||||||||
| CudpHelperInetAddrStatus | 1.3.6.1.4.1.259.10.1.5.1.58.3.1.4 | ValidStatus | RC | ||||||||||
column · ValidStatus · read-create · current To forward UDP broadcasts, including BOOTP, received from the specified interface, to the specified address. Set this variable to valid(1) to enable forwarding of packets. Set this variable to invalid(2) to disable forwarding of packets. All of the following conditions must be met in order for a User Datagram Protocol (UDP) or IP packet to be helped: 1. The MAC address of the received frame must be all-ones broadcast address (FF-FF-FF-FF-FF-FF). 2. The IP destination address must be one of the following: 1) all-ones broadcast (255.255.255.255) 2) subnet broadcast for the receiving interface 3. The IP protocol must be UDP (17). 4. The UDP destination port must be TFTP, Domain Name System (DNS), Time, NetBIOS, BOOTP or DHCP packet, or a UDP port specified by the udpHelperForwardTable. | |||||||||||||
| NerpsMgt | 1.3.6.1.4.1.259.10.1.5.1.62 | ||||||||||||
| SerpsGlobalStatus | 1.3.6.1.4.1.259.10.1.5.1.62.1 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Configures the ERPS function for an entire switch. Note that the ERPS domain will not take effect unless it becomes active and the global status is enabled.
| |||||||||||||
| TerpsDomainTable | 1.3.6.1.4.1.259.10.1.5.1.62.2 | NA | |||||||||||
table · not-accessible · current Table for ERPS domain configuration. | |||||||||||||
| RerpsDomainEntry | 1.3.6.1.4.1.259.10.1.5.1.62.2.1 | NA | |||||||||||
| CerpsDomainIndex | 1.3.6.1.4.1.259.10.1.5.1.62.2.1.1 | Integer32 (1..12) | NA | ||||||||||
column · Integer32 (1..12) · not-accessible · current An index that uniquely identifies an entry in the erpsDomainTable. | |||||||||||||
| CerpsDomainName | 1.3.6.1.4.1.259.10.1.5.1.62.2.1.2 | DisplayString (SIZE (1..12)) | RC | ||||||||||
column · DisplayString (SIZE (1..12)) · read-create · current The domain name that uniquely identifies an entry in the erpsDomainTable. | |||||||||||||
| CerpsDomainMegLevel | 1.3.6.1.4.1.259.10.1.5.1.62.2.1.3 | INTEGER (0..7) | RC | ||||||||||
column · INTEGER (0..7) · read-create · current Configures the maintenance entity group (MEG) level which is used to provide a communication channel for ring automatic protection switching (R-APS) information. | |||||||||||||
| CerpsDomainNodeId | 1.3.6.1.4.1.259.10.1.5.1.62.2.1.4 | MacAddress | RC | ||||||||||
column · MacAddress · read-create · current Configures the node id whcih is a MAC address unique to the ring node. | |||||||||||||
| CerpsDomainWestRingPort | 1.3.6.1.4.1.259.10.1.5.1.62.2.1.5 | Integer32 | RC | ||||||||||
column · Integer32 · read-create · current Each node on the ring connects to the ring through two ports. As part of the protection switching scheme, one port can be configured as the west port for the specified domain. The east port and west port can not be configured as the same port. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex in the IF-MIB. | |||||||||||||
| CerpsDomainEastRingPort | 1.3.6.1.4.1.259.10.1.5.1.62.2.1.6 | Integer32 | RC | ||||||||||
column · Integer32 · read-create · current Each node on the ring connects to the ring through two ports. As part of the protection switching scheme, one port can be configured as the east port for the specified domain. The east port and west port can not be configured as the same port. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex in the IF-MIB. | |||||||||||||
| CerpsDomainRplOwner | 1.3.6.1.4.1.259.10.1.5.1.62.2.1.7 | INTEGER | RC | ||||||||||
column · INTEGER · read-create · current Set to enabled(1) to make this node act as a RPL owner.
| |||||||||||||
| CerpsDomainRplPort | 1.3.6.1.4.1.259.10.1.5.1.62.2.1.8 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current This value displays the port for ring protection link which under normal conditions, i.e., without any failure or request, is blocked for traffic channel, to prevent the formation of loops.
| |||||||||||||
| CerpsDomainGuardTimer | 1.3.6.1.4.1.259.10.1.5.1.62.2.1.9 | Integer32 (10..2000) | RC | ||||||||||
column · Integer32 (10..2000) · read-create · current Configures the value of the guard timer which is used to prevent ring nodes from receiving outdated R-APS messages. The range is in 10 ms steps between 10 ms and 2 seconds, with a default value of 500 ms. | |||||||||||||
| CerpsDomainHoldoffTimer | 1.3.6.1.4.1.259.10.1.5.1.62.2.1.10 | Integer32 (0..10000) | RC | ||||||||||
column · Integer32 (0..10000) · read-create · current Configures the value of the holdoff timer which is used to prevent reporting error event immediately to protection switching if the provisioned holdoff timer value is non-zero. The range is in 100 ms steps between 0 and 10 seconds, with a default value of 0 ms. | |||||||||||||
| CerpsDomainWtrTimer | 1.3.6.1.4.1.259.10.1.5.1.62.2.1.11 | Integer32 (5..12) | RC | ||||||||||
column · Integer32 (5..12) · read-create · current Configures the value of the wait-to-restore timer which is used by the RPL owner node to prevent frequent switching operations that may be caused by intermittent failures. The range is in 1 minute steps between 5 and 12 minutes with a default value of 5 minutes. This object will not take effect for the non RPL owner node. | |||||||||||||
| CerpsDomainControlVlanID | 1.3.6.1.4.1.259.10.1.5.1.62.2.1.12 | Integer32 | RC | ||||||||||
column · Integer32 · read-create · current This is defined as dot1qVlanIndex in the Q-BRIDGE-MIB. Configures one control VLAN for each ERPS domain. The control VLAN is used only to send and receive ERPS message. A control VLAN can not belong to more than on ERPS domain. | |||||||||||||
| CerpsDomainNodeState | 1.3.6.1.4.1.259.10.1.5.1.62.2.1.13 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current This value displays the node's current state.
It displays one of the following states
(1). init -- The node is in the init state.
(The node state will stay in init state, if global status
or domain status is not enabled.)
(2). idle -- The node is in idle state (i.e., no detected
failures, and receiving only 'NR, RB' R-APS frames).
(3). protection -- The node is in protection state.
| |||||||||||||
| CerpsDomainWestRingPortState | 1.3.6.1.4.1.259.10.1.5.1.62.2.1.14 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current This value displays the west ring port's current state.
It displays one of the following states
(1). unknown -- The port's current state is unknown.
(The port's current state will stay in unknown state
if the node's current state is in init state.)
(2). blocking -- The transmission and reception of traffic
are blocked.
(3). forwarding -- The traffic can be transmitted and received
normally.
| |||||||||||||
| CerpsDomainEastRingPortState | 1.3.6.1.4.1.259.10.1.5.1.62.2.1.15 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current This value displays the east ring port's current state.
It displays one of the following states
(1). unknown -- The port's current state is unknown.
(The port's current state will stay in unknown state
if the node's current state is in init state.)
(2). blocking -- The transmission and reception of traffic
are blocked.
(3). forwarding -- The traffic can be transmitted and received
normally.
| |||||||||||||
| CerpsDomainRowStatus | 1.3.6.1.4.1.259.10.1.5.1.62.2.1.16 | RowStatus | RC | ||||||||||
column · RowStatus · read-create · current The status of this conceptual row entry. This object is used to manage the creation and deletion of conceptual rows. The status column has six defined values: - 'active', which indicates that the conceptual row is available for use by the managed device; - 'notInService', which indicates that the conceptual row exists in the agent, but is unavailable for use by the managed device (see NOTE below); - 'notReady', which indicates that the conceptual row exists in the agent, but is missing information necessary in order to be available for use by the managed device; - 'createAndGo', which is supplied by a management station wishing to create a new instance of a conceptual row and to have its status automatically set to active, making it available for use by the managed device; - 'createAndWait', which is supplied by a management station wishing to create a new instance of a conceptual row (but not make it available for use by the managed device); and, - 'destroy', which is supplied by a management station wishing to delete all of the instances associated with an existing conceptual row. Whereas five of the six values (all except 'notReady') may be specified in a management protocol set operation, only three values will be returned in response to a management protocol retrieval operation: 'notReady', 'notInService' or 'active'. That is, when queried, an existing conceptual row has only three states: it is either available for use by the managed device (the status column has value 'active'); it is not available for use by the managed device, though the agent has sufficient information to make it so (the status column has value 'notInService'); or, it is not available for use by the managed device, and an attempt to make it so would fail because the agent has insufficient information (the state column has value 'notReady'). For a detailed description of this object, please refer to SNMPv2-TC MIB. Note that other objects can not be modified when the status is active. | |||||||||||||
| CerpsDomainMajorDomainIndex | 1.3.6.1.4.1.259.10.1.5.1.62.2.1.17 | Integer32 | RC | ||||||||||
column · Integer32 · read-create · current An index that uniquely identifies an entry in the
erpsDomainTable. A value of 0 means this domain has no major
domain.
Notes: This objest can not be configured if
erpsDomainRingPortEast has a vaule other than 0. | |||||||||||||
| CerpsDomainPropagateTC | 1.3.6.1.4.1.259.10.1.5.1.62.2.1.18 | INTEGER | RC | ||||||||||
column · INTEGER · read-create · current Set to enabled(1) to transmit topology change signal to the major domain. It will not take effect, if erpsDomainMajorDomainIndex has a value of 0.
| |||||||||||||
| CerpsDomainWestMepId | 1.3.6.1.4.1.259.10.1.5.1.62.2.1.20 | Integer32 (0..8191) | RC | ||||||||||
column · Integer32 (0..8191) · read-create · current Configures a CFM Down MEP on west ring port. A down MEP can be uniquely select by given a MEPID, domain's MEG level, and domain's control VLAN ID. A value of 0 means no west MEP is not configured for this domain. | |||||||||||||
| CerpsDomainEastMepId | 1.3.6.1.4.1.259.10.1.5.1.62.2.1.21 | Integer32 (0..8191) | RC | ||||||||||
column · Integer32 (0..8191) · read-create · current Configures a CFM Down MEP on east ring port. A down MEP can be uniquely select by given a MEPID, domain's MEG level, and domain's control VLAN ID. A value of 0 means no east MEP is not configured for this domain. | |||||||||||||
| CerpsDomainNonErpsDevProtect | 1.3.6.1.4.1.259.10.1.5.1.62.2.1.22 | INTEGER | RC | ||||||||||
column · INTEGER · read-create · current Set to enabled(1) to use non-standard protection mechanism for network containing non-ERPS devices.
| |||||||||||||
| Nipv6TunnelMgt | 1.3.6.1.4.1.259.10.1.5.1.65 | ||||||||||||
| Tipv6TunnelTable | 1.3.6.1.4.1.259.10.1.5.1.65.1 | NA | |||||||||||
table · not-accessible · current Table for configuration in IPv6 Tunnel management. | |||||||||||||
| Ripv6TunnelEntry | 1.3.6.1.4.1.259.10.1.5.1.65.1.1 | NA | |||||||||||
row · not-accessible · current Entry for configuration in IPv6 Tunnel management.
| |||||||||||||
| Cipv6TunnelIndex | 1.3.6.1.4.1.259.10.1.5.1.65.1.1.1 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current The tunnel interface index. | |||||||||||||
| Cipv6TunnelNdRaSuppress | 1.3.6.1.4.1.259.10.1.5.1.65.1.1.2 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current To set router advertisement transmission.
| |||||||||||||
| Cipv6TunnelMode | 1.3.6.1.4.1.259.10.1.5.1.65.1.1.3 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current To set ipv6 tunnel mode.configured(1) is for static tunnel, sixtofour(2) and isatap(3) are for dynamic tunnels
| |||||||||||||
| Cipv6TunnelTtl | 1.3.6.1.4.1.259.10.1.5.1.65.1.1.4 | Integer32 (1..255) | RW | ||||||||||
column · Integer32 (1..255) · read-write · current To set ttl value of ipv4 header of ipv6 encapsulation for tunneling. | |||||||||||||
| Cipv6TunnelDestination | 1.3.6.1.4.1.259.10.1.5.1.65.1.1.5 | InetAddress | RW | ||||||||||
column · InetAddress · read-write · current To set tunnel destination/remote endpoint on the tunnel interface. | |||||||||||||
| Cipv6TunnelSourceVlanIfindex | 1.3.6.1.4.1.259.10.1.5.1.65.1.1.6 | Integer32 | RW | ||||||||||
column · Integer32 · read-write · current To set tunnel source/local endpoint interface on the tunnel interface. | |||||||||||||
| Cipv6TunnelRowStatus | 1.3.6.1.4.1.259.10.1.5.1.65.1.1.7 | RowStatus | RW | ||||||||||
column · RowStatus · read-write · current Row status of the tunnel interface. | |||||||||||||
| Necs4610-24fNotifications | 1.3.6.1.4.1.259.10.1.5.2 | ||||||||||||
| Necs4610-24fTraps | 1.3.6.1.4.1.259.10.1.5.2.1 | ||||||||||||
| Necs4610-24fTrapsPrefix | 1.3.6.1.4.1.259.10.1.5.2.1.0 | ||||||||||||
| !swPowerStatusChangeTrap | 1.3.6.1.4.1.259.10.1.5.2.1.0.1 | ||||||||||||
notification · current This trap is sent when the power state changes. | |||||||||||||
| !swPortSecurityTrap | 1.3.6.1.4.1.259.10.1.5.2.1.0.36 | ||||||||||||
notification · current This trap is sent when the port is being intruded. This trap will only be sent when the portSecAction is set to trap(2) or trapAndShutdown(4).
| |||||||||||||
| !swIpFilterRejectTrap | 1.3.6.1.4.1.259.10.1.5.2.1.0.40 | ||||||||||||
notification · current This trap is sent when an incorrect IP address is rejected by the ipfilter. | |||||||||||||
| !swSmtpConnFailureTrap | 1.3.6.1.4.1.259.10.1.5.2.1.0.41 | ||||||||||||
notification · current This trap is triggered if the SMTP system cannot open a connection to the mail server successfully.
| |||||||||||||
| !swMainBoardVerMismatchNotificaiton | 1.3.6.1.4.1.259.10.1.5.2.1.0.56 | ||||||||||||
notification · current This trap is sent when the slave version is mismatch with the master version. This trap will binds two object, the first object indicate the master version, whereas the second represent the slave version.
| |||||||||||||
| !swAtcBcastStormAlarmFireTrap | 1.3.6.1.4.1.259.10.1.5.2.1.0.70 | ||||||||||||
notification · current When the broadcast traffic is detected as the storm, this trap will be fired. | |||||||||||||
| !swAtcBcastStormAlarmClearTrap | 1.3.6.1.4.1.259.10.1.5.2.1.0.71 | ||||||||||||
notification · current When the broadcast storm is detected as the normal traffic, this trap will be fired. | |||||||||||||
| !swAtcBcastStormTcApplyTrap | 1.3.6.1.4.1.259.10.1.5.2.1.0.72 | ||||||||||||
notification · current When the ATC is activated, this trap will be fired. | |||||||||||||
| !swAtcBcastStormTcReleaseTrap | 1.3.6.1.4.1.259.10.1.5.2.1.0.73 | ||||||||||||
notification · current When the ATC is released, this trap will be fired. | |||||||||||||
| !swAtcMcastStormAlarmFireTrap | 1.3.6.1.4.1.259.10.1.5.2.1.0.74 | ||||||||||||
notification · current When the multicast traffic is detected as the storm, this trap will be fired. | |||||||||||||
| !swAtcMcastStormAlarmClearTrap | 1.3.6.1.4.1.259.10.1.5.2.1.0.75 | ||||||||||||
notification · current When the multicast storm is detected as the normal traffic, this trap will be fired. | |||||||||||||
| !swAtcMcastStormTcApplyTrap | 1.3.6.1.4.1.259.10.1.5.2.1.0.76 | ||||||||||||
notification · current When the ATC is activated, this trap will be fired. | |||||||||||||
| !swAtcMcastStormTcReleaseTrap | 1.3.6.1.4.1.259.10.1.5.2.1.0.77 | ||||||||||||
notification · current When the ATC is released, this trap will be fired. | |||||||||||||
| !swLoopbackDetectionTrap | 1.3.6.1.4.1.259.10.1.5.2.1.0.95 | ||||||||||||
notification · current This trap will be sent when loopback BPDUs have been detected. | |||||||||||||
| !networkAccessPortLinkDetectionTrap | 1.3.6.1.4.1.259.10.1.5.2.1.0.96 | ||||||||||||
notification · current This trap is sent when a networkAccessPortLinkDetection event is triggered. | |||||||||||||
| !swCpuUtiRisingNotification | 1.3.6.1.4.1.259.10.1.5.2.1.0.107 | ||||||||||||
notification · current This notification indicates that the CPU utilization crossed cpuUtiRisingThreshold. | |||||||||||||
| !swCpuUtiFallingNotification | 1.3.6.1.4.1.259.10.1.5.2.1.0.108 | ||||||||||||
notification · current This notification indicates that the CPU utilization crossed cpuUtiFallingThreshold. | |||||||||||||
| !swMemoryUtiRisingThresholdNotification | 1.3.6.1.4.1.259.10.1.5.2.1.0.109 | ||||||||||||
notification · current This notification indicates that the memory utilization crossed memoryUtiRisingThreshold. | |||||||||||||
| !swMemoryUtiFallingThresholdNotification | 1.3.6.1.4.1.259.10.1.5.2.1.0.110 | ||||||||||||
notification · current This notification indicates that the memory utilization crossed memoryUtiFallingThreshold. | |||||||||||||
| !swLoginFailureTrap | 1.3.6.1.4.1.259.10.1.5.2.1.0.139 | ||||||||||||
notification · current This trap is sent when login fail via console,telnet, or web.
| |||||||||||||
| !swLoginSucceedTrap | 1.3.6.1.4.1.259.10.1.5.2.1.0.140 | ||||||||||||
notification · current This trap is sent when login succeed via console,telnet, or web.
| |||||||||||||
| Necs4610-24fConformance | 1.3.6.1.4.1.259.10.1.5.3 | ||||||||||||
Textual conventions
AreaIDIpAddressAn OSPF Area Identifier.
BigMetricInteger32 (0..16777215)The OSPF External Metric.
DesignatedRouterPriorityInteger32 (0..255)The values defined for the priority of a system for becoming the designated router.
HelloRangeInteger32 (1..65535)The range of intervals on which hello messages are exchanged.
KeySegmentDisplayString (SIZE (0..128))The total length of the key is 1024 characters, it is divided into 8 parts and stored in 8 separated mib variables as below: Key1: part 1 of the key (1-128) Key2: part 2 of the key (129-256) Key3: part 3 of the key (257-384) Key4: part 4 of the key (385-512) Key5: part 5 of the key (513-640) Key6: part 6 of the key (641-768) Key7: part 7 of the key (769-896) Key8: part 8 of the key (897-1024) Please note that if the key string is less then 1024 characters, the remaining part of the string will be filled by a zero-length string. For example, if the length of the key is 129, we will get a string of length 128 in Key1, and a string of length 1 in Key2, moreover, Key3 to Key8 will all be zero-length strings.OspfAuthenticationTypeINTEGERmd5(2)none(0)simplePassword(1)The authentication type.
PositiveIntegerInteger32 (0..2147483647)A positive integer. Values in excess are precluded as unnecessary and prone to interoperability issues.
RouterIDIpAddressA OSPF Router Identifier.
StaPathCostModeINTEGERlong(2)short(1)The path cost mode of a spanning tree algorithm, short(1) indicates that we retrieve/configure the spanning tree path cost as a 16 bit value and long(2) indicates that we retrieve/configure the spanning tree path cost as a 32 bit value.
StatusINTEGERdisabled(2)enabled(1)The status of an interface: 'enabled' indicates that it is willing to communicate with other OSPF Routers, while 'disabled' indicates that it is not.
UpToMaxAgeInteger32 (0..3600)The values that one might find or configure for variables bounded by the maximum age of an LSA.
ValidStatusINTEGERinvalid(2)valid(1)A simple status value for the object to create and destroy a table entry. This is a simplified variant of RowStatus as it supports only two values. Setting it to valid(1) creates an entry. Setting it to invalid(2) destroys an entry.
Traps / Notifications
- networkAccessPortLinkDetectionTrap
1.3.6.1.4.1.259.10.1.5.2.1.0.96 - swAtcBcastStormAlarmClearTrap
1.3.6.1.4.1.259.10.1.5.2.1.0.71 - swAtcBcastStormAlarmFireTrap
1.3.6.1.4.1.259.10.1.5.2.1.0.70 - swAtcBcastStormTcApplyTrap
1.3.6.1.4.1.259.10.1.5.2.1.0.72 - swAtcBcastStormTcReleaseTrap
1.3.6.1.4.1.259.10.1.5.2.1.0.73 - swAtcMcastStormAlarmClearTrap
1.3.6.1.4.1.259.10.1.5.2.1.0.75 - swAtcMcastStormAlarmFireTrap
1.3.6.1.4.1.259.10.1.5.2.1.0.74 - swAtcMcastStormTcApplyTrap
1.3.6.1.4.1.259.10.1.5.2.1.0.76 - swAtcMcastStormTcReleaseTrap
1.3.6.1.4.1.259.10.1.5.2.1.0.77 - swCpuUtiFallingNotification
1.3.6.1.4.1.259.10.1.5.2.1.0.108 - swCpuUtiRisingNotification
1.3.6.1.4.1.259.10.1.5.2.1.0.107 - swIpFilterRejectTrap
1.3.6.1.4.1.259.10.1.5.2.1.0.40 - swLoginFailureTrap
1.3.6.1.4.1.259.10.1.5.2.1.0.139 - swLoginSucceedTrap
1.3.6.1.4.1.259.10.1.5.2.1.0.140 - swLoopbackDetectionTrap
1.3.6.1.4.1.259.10.1.5.2.1.0.95 - swMainBoardVerMismatchNotificaiton
1.3.6.1.4.1.259.10.1.5.2.1.0.56 - swMemoryUtiFallingThresholdNotification
1.3.6.1.4.1.259.10.1.5.2.1.0.110 - swMemoryUtiRisingThresholdNotification
1.3.6.1.4.1.259.10.1.5.2.1.0.109 - swPortSecurityTrap
1.3.6.1.4.1.259.10.1.5.2.1.0.36 - swPowerStatusChangeTrap
1.3.6.1.4.1.259.10.1.5.2.1.0.1 - swSmtpConnFailureTrap
1.3.6.1.4.1.259.10.1.5.2.1.0.41