snmptranslate -m NSCRTV-ROOT -Tpsnmpwalk -v2c -c <community> -m NSCRTV-ROOT <host> 1.3.6.1.4.1.17409Imports
| RFC1155-SMI | Counter32 |
|---|---|
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
| SNMPv2-SMI | Bits, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, enterprises, iso |
| SNMPv2-TC | DisplayString, NetworkAddress, PhysAddress, TEXTUAL-CONVENTION |
OID tree
| Name | OID | Type | Access | Status | Example | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| NnscrtvRoot | 1.3.6.1.4.1.17409 | ||||||||||||
| NnscrtvHFCemsTree | 1.3.6.1.4.1.17409.1 | ||||||||||||
| !hfcColdStart | 1.3.6.1.4.1.17409.1.0.0 | ||||||||||||
notification HfcColdStart traps that are sent to re-initialization protocol entities, and entities agent configuration or agreement may have changed. This trap only after the success of transponder sent registration.
| |||||||||||||
| !hfcAlarmEvent | 1.3.6.1.4.1.17409.1.0.1 | ||||||||||||
notification When detected in the event of alarm information sent this trap, whether bundled alarmText variable parameter under warning object to determine. Some of the parameters only need to bind the alarm first three variables. | |||||||||||||
| !hfcWarmStart | 1.3.6.1.4.1.17409.1.0.2 | ||||||||||||
notification HfcWarmStart traps that are sent to re-initialization protocol entities, and entities agent configuration or agreement has not changed. This trap only after the completion of transponder sent registration.
| |||||||||||||
| NpropertyIdent | 1.3.6.1.4.1.17409.1.1 | ||||||||||||
| TanalogPropertyTable | 1.3.6.1.4.1.17409.1.1.1 | NA | mandatory | ||||||||||
table · not-accessible · mandatory Attribute Table simulation parameters | |||||||||||||
| RanalogPropertyEntry | 1.3.6.1.4.1.17409.1.1.1.1 | NA | mandatory | ||||||||||
row · not-accessible · mandatory Attribute Table simulation parameters head. OID purpose as a table index,Its coding method is'length��OID'��OID former two members'1.3'According to '1'and'3'respectively coding,Instead of ordinary OID encoding (0x2B).
| |||||||||||||
| CanalogParameterOID | 1.3.6.1.4.1.17409.1.1.1.1.1 | OBJECT IDENTIFIER | RO | mandatory | |||||||||
column · OBJECT IDENTIFIER · read-only · mandatory index | |||||||||||||
| CalarmEnable | 1.3.6.1.4.1.17409.1.1.1.1.2 | OCTET STRING (SIZE (1)) | RW | mandatory | |||||||||
column · OCTET STRING (SIZE (1)) · read-write · mandatory Alarm enable control byte, the corresponding position for the'1 'that allow alarm,'0' a ban warning
Bit 0: Alarm enable low
Bit 1: Alarm enable low
Bit 2: Alarm enable high
Bit 3: Alarm enable high
Bit 4 ~ 7 reservations should be 0
This object should be stored in nonvolatile memory. | |||||||||||||
| CanalogAlarmState | 1.3.6.1.4.1.17409.1.1.1.1.3 | INTEGER | RO | mandatory | |||||||||
column · INTEGER · read-only · mandatory The parameters of the current state of alarm.
| |||||||||||||
| CanalogAlarmHIHI | 1.3.6.1.4.1.17409.1.1.1.1.4 | INTEGER | RW | mandatory | 270 | ||||||||
column · INTEGER · read-write · mandatory Alarm HIHI high threshold value. This object should be stored in non-volatile memory. | |||||||||||||
| CanalogAlarmHI | 1.3.6.1.4.1.17409.1.1.1.1.5 | INTEGER | RW | mandatory | 260 | ||||||||
column · INTEGER · read-write · mandatory HI high alarm threshold value. This object should be stored in non-volatile memory. | |||||||||||||
| CanalogAlarmLO | 1.3.6.1.4.1.17409.1.1.1.1.6 | INTEGER | RW | mandatory | 110 | ||||||||
column · INTEGER · read-write · mandatory LO low alarm threshold value. This object should be stored in non-volatile memory. | |||||||||||||
| CanalogAlarmLOLO | 1.3.6.1.4.1.17409.1.1.1.1.7 | INTEGER | RW | mandatory | 100 | ||||||||
column · INTEGER · read-write · mandatory Alarm LOLO very low threshold value. This object should be stored in non-volatile memory. | |||||||||||||
| CanalogAlarmDeadband | 1.3.6.1.4.1.17409.1.1.1.1.8 | INTEGER | RW | mandatory | |||||||||
column · INTEGER · read-write · mandatory Dead-alarm threshold value. After the warning, parameter values should be restored to the alarm threshold and alarm threshold and the difference between the absolute value greater than the value of dead zone, the alarm can be removed. This object should be stored in nonvolatile memory. | |||||||||||||
| TdiscretePropertyTable | 1.3.6.1.4.1.17409.1.1.2 | NA | mandatory | ||||||||||
table · not-accessible · mandatory Discrete Attribute Table. | |||||||||||||
| RdiscretePropertyEntry | 1.3.6.1.4.1.17409.1.1.2.1 | NA | mandatory | ||||||||||
row · not-accessible · mandatory Attribute Table discrete head. OID coding methods with simulation attribute table | |||||||||||||
| CdiscreteParameterOID | 1.3.6.1.4.1.17409.1.1.2.1.1 | OBJECT IDENTIFIER | RO | mandatory | |||||||||
column · OBJECT IDENTIFIER · read-only · mandatory Attribute Table discrete index 1: Parameters OID. | |||||||||||||
| CdiscreteAlarmValue | 1.3.6.1.4.1.17409.1.1.2.1.2 | INTEGER | RO | mandatory | |||||||||
column · INTEGER · read-only · mandatory Attribute Table discrete index 2: parameter values. When the equipment value of this parameter values, and so will be dealt with a warning. | |||||||||||||
| CdiscreteAlarmEnable | 1.3.6.1.4.1.17409.1.1.2.1.3 | INTEGER | RW | mandatory | |||||||||
column · INTEGER · read-write · mandatory When the alarm so that it can open the (2 or 3), this parameter allows for alarm processing. If the alarm so that it can shut down (1), alarm processing will be carried out. This object default values for the disable (1). This object should be stored in non-volatile memory.
| |||||||||||||
| CdiscreteAlarmState | 1.3.6.1.4.1.17409.1.1.2.1.4 | INTEGER | RO | mandatory | dasNominal(1) | ||||||||
column · INTEGER · read-only · mandatory The parameters of the current state of alarm.
Example values from LibreNMS test devices
| |||||||||||||
| TcurrentAlarmTable | 1.3.6.1.4.1.17409.1.1.3 | NA | mandatory | ||||||||||
table · not-accessible · mandatory The current warning Table. | |||||||||||||
| RcurrentAlarmEntry | 1.3.6.1.4.1.17409.1.1.3.1 | NA | mandatory | ||||||||||
row · not-accessible · mandatory The current warning Table Head. OID coding methods with simulation attribute table.
| |||||||||||||
| CcurrentAlarmOID | 1.3.6.1.4.1.17409.1.1.3.1.1 | OBJECT IDENTIFIER | RO | mandatory | |||||||||
column · OBJECT IDENTIFIER · read-only · mandatory NE, currently in a state of alarm parameters OID Index, and attribute the alarm in the table corresponding parameters OID. | |||||||||||||
| CcurrentAlarmState | 1.3.6.1.4.1.17409.1.1.3.1.2 | INTEGER | RO | mandatory | |||||||||
column · INTEGER · read-only · mandatory Warning parameters of the current state of alarm.
| |||||||||||||
| CcurrentAlarmValue | 1.3.6.1.4.1.17409.1.1.3.1.3 | INTEGER | RO | mandatory | |||||||||
column · INTEGER · read-only · mandatory Alarm parameter's value. | |||||||||||||
| NalarmsIdent | 1.3.6.1.4.1.17409.1.2 | ||||||||||||
| SalarmLogNumberOfEntries | 1.3.6.1.4.1.17409.1.2.1 | INTEGER | RO | mandatory | |||||||||
scalar · INTEGER · read-only · mandatory Alarm record number of records in the table. | |||||||||||||
| SalarmLogLastIndex | 1.3.6.1.4.1.17409.1.2.2 | INTEGER | RO | mandatory | |||||||||
scalar · INTEGER · read-only · mandatory Recently a warning the index of the records. | |||||||||||||
| TalarmLogTable | 1.3.6.1.4.1.17409.1.2.3 | NA | mandatory | ||||||||||
table · not-accessible · mandatory Alarm record form, at least support 16 record. Each table in the registration of a new record, the management agent (transponder) managers should send traps news. | |||||||||||||
| RalarmLogEntry | 1.3.6.1.4.1.17409.1.2.3.1 | NA | mandatory | ||||||||||
| CalarmLogIndex | 1.3.6.1.4.1.17409.1.2.3.1.1 | INTEGER (1..32767) | RO | mandatory | |||||||||
column · INTEGER (1..32767) · read-only · mandatory The only logo Alarm Index recorded a record in the table, the index value increased from 1 start of each new record, plus 1 until 32,767, a record index of the re-starts at 1. Acting under the management of storage capacity can be the first choice to delete those records, the specific details in this not to achieve provisions. | |||||||||||||
| CalarmLogInformation | 1.3.6.1.4.1.17409.1.2.3.1.2 | OCTET STRING (SIZE (17..255)) | RO | mandatory | |||||||||
column · OCTET STRING (SIZE (17..255)) · read-only · mandatory Alarm record information, multi-byte strings, defined as follows: Byte 1 ~ 4: Alarm in time (POSIX format, the previous maximum byte) Byte 5: Alarm types (enumeration, definitions see behind) Byte 6: Alarm value after commonNeStatus Byte 7 ~ m: Alarm parameters object identifier (Basic Encoding Rules (ASN.1)) Byte n ~ z: Alarm parameter values (Basic Encoding Rules (ASN.1)) Alarm enumerated types: 1 NOMINAL 2 HIHI 3 HI 4 LO 5 LOLO 6 Discrete Major 7 Discrete Minor | |||||||||||||
| SalarmText | 1.3.6.1.4.1.17409.1.2.4 | DisplayString | NA | optional | |||||||||
scalar · DisplayString · not-accessible · optional This trap targets for the needs of information contained in a text field transponder information is achievable. The field contains the text of the object depends on the definition of alarm parameters, it is uncertain, This object can not access provisions. | |||||||||||||
| NcommonIdent | 1.3.6.1.4.1.17409.1.3 | ||||||||||||
| NcommonAdminGroup | 1.3.6.1.4.1.17409.1.3.1 | ||||||||||||
| ScommonNELogicalID | 1.3.6.1.4.1.17409.1.3.1.1 | OCTET STRING (SIZE (0..40)) | RW | mandatory | |||||||||
scalar · OCTET STRING (SIZE (0..40)) · read-write · mandatory The logic of the designated NE identifier (LogicID), the values and attributes of other unrelated NE. This target value should be stored in non-volatile memory. | |||||||||||||
| ScommonNEVendor | 1.3.6.1.4.1.17409.1.3.1.2 | DisplayString (SIZE (0..255)) | RO | mandatory | |||||||||
scalar · DisplayString (SIZE (0..255)) · read-only · mandatory NE equipment manufacturers. | |||||||||||||
| ScommonNEModelNumber | 1.3.6.1.4.1.17409.1.3.1.3 | DisplayString (SIZE (0..255)) | RO | mandatory | |||||||||
scalar · DisplayString (SIZE (0..255)) · read-only · mandatory NE equipment models. | |||||||||||||
| ScommonNESerialNumber | 1.3.6.1.4.1.17409.1.3.1.4 | DisplayString (SIZE (0..255)) | RO | mandatory | |||||||||
scalar · DisplayString (SIZE (0..255)) · read-only · mandatory NE equipment serial numbers. | |||||||||||||
| ScommonNEVendorInfo | 1.3.6.1.4.1.17409.1.3.1.5 | DisplayString (SIZE (0..255)) | RO | optional | |||||||||
scalar · DisplayString (SIZE (0..255)) · read-only · optional NE equipment suppliers other special designated information. | |||||||||||||
| ScommonNEStatus | 1.3.6.1.4.1.17409.1.3.1.6 | OCTET STRING (SIZE (1)) | RO | mandatory | |||||||||
scalar · OCTET STRING (SIZE (1)) · read-only · mandatory With 7.5.4 STATRESP PDU parameters in the corresponding Status
Bit 0: CHNLRQST
Bit 1: CNTNRM
Bit 2: CNTCUR
Bit 3: MAJOR ALARMS
Bit 4: MINOR ALARMS
Bit 5: RSVD1
Bit 6: RSVD2
Bit 7: RSVD3 | |||||||||||||
| ScommonReset | 1.3.6.1.4.1.17409.1.3.1.7 | INTEGER | RW | mandatory | |||||||||
scalar · INTEGER · read-write · mandatory Write'1 'will be reset NE equipment, the value will be included in other non-functional. Reading this object return value'1 ', had no effect on equipment.
| |||||||||||||
| ScommonAlarmDetectionControl | 1.3.6.1.4.1.17409.1.3.1.8 | INTEGER | RW | mandatory | |||||||||
scalar · INTEGER · read-write · mandatory This object used to control the Alarm Detection NE.
| |||||||||||||
| ScommonNetworkAddress | 1.3.6.1.4.1.17409.1.3.1.9 | IpAddress | RO | mandatory | |||||||||
scalar · IpAddress · read-only · mandatory NE network IP address, NE produce Trap should include this address. This value should be stored in nonvolatile memory. This value can be registered through the MAC order or through local vendors to set up Interface. | |||||||||||||
| ScommonCheckCode | 1.3.6.1.4.1.17409.1.3.1.10 | INTEGER | RW | mandatory | |||||||||
scalar · INTEGER · read-write · mandatory This target for the detection transponder code configuration of the report. The calculation includes detection code transponder (including management equipment) and the physical configuration parameters stored in non-volatile memory of all the parameters. The detection algorithm calculated by the vendor code provisions. The object should be kept in the value of non-volatile memory, the response thinks highly activated, will be recalculated and re-testing code and the value prior to the commencement of comparison to determine whether or should haveһ��hfcColdStart hfcWarmStart traps. When write this object (SetRequest), the detection code will be recalculated and fill the SetRequest in response to the GetResponse. At this time, will not produce or hfcWarmStart traps hfcColdStart. | |||||||||||||
| ScommonTrapCommunityString | 1.3.6.1.4.1.17409.1.3.1.11 | OCTET STRING (SIZE (0..64)) | RW | mandatory | |||||||||
scalar · OCTET STRING (SIZE (0..64)) · read-write · mandatory Definition of Community Trap string. The default value is' public '. The value of this object should be stored in non-volatile memory. | |||||||||||||
| ScommonTamperStatus | 1.3.6.1.4.1.17409.1.3.1.12 | INTEGER | RO | optional | |||||||||
scalar · INTEGER · read-only · optional The safety report NE switching equipment (such as whether to open up the lid) state that this object is called discrete attributes of a corresponding entry in the table. Intact that normal, expressed alarm compromised.
| |||||||||||||
| ScommonInternalTemperature | 1.3.6.1.4.1.17409.1.3.1.13 | INTEGER (-128..127) | RO | optional | |||||||||
scalar · INTEGER (-128..127) · read-only · optional NE equipment Room (machine) temperature, units degrees Celsius. This request object attribute in a corresponding entry in the table. | |||||||||||||
| ScommonTime | 1.3.6.1.4.1.17409.1.3.1.14 | INTEGER | RW | optional | |||||||||
scalar · INTEGER · read-write · optional NE of the POSIX said that the current time (since at 0:00 on January 1, 1970 since the seconds). | |||||||||||||
| ScommonVarBindings | 1.3.6.1.4.1.17409.1.3.1.15 | INTEGER | RO | mandatory | |||||||||
scalar · INTEGER · read-only · mandatory This object can be said to receive SNMP information NE variables bundled the largest number of tables. Value: 0 indicated no restrictions on the maximum number bundled. | |||||||||||||
| ScommonResetCause | 1.3.6.1.4.1.17409.1.3.1.16 | INTEGER | RO | mandatory | |||||||||
scalar · INTEGER · read-only · mandatory NE said the reasons for the recent reduction.
| |||||||||||||
| ScommonCraftStatus | 1.3.6.1.4.1.17409.1.3.1.17 | INTEGER | RO | mandatory | |||||||||
scalar · INTEGER · read-only · mandatory NE local object that this interface (such as RS232 or RS485 interface) state. NE does not necessarily have to support the local interface. NE local interface without affecting the state of its MAC interface functions; If we do not support the local interface, and its value is disconnected.
| |||||||||||||
| ScommonDeviceOID | 1.3.6.1.4.1.17409.1.3.1.18 | OBJECT IDENTIFIER | RO | optional | |||||||||
scalar · OBJECT IDENTIFIER · read-only · optional This OID object as a pointer, the equipment was used at MIB (such as Node, two-way amplifier, etc). | |||||||||||||
| ScommonDeviceId | 1.3.6.1.4.1.17409.1.3.1.19 | OCTET STRING (SIZE (32)) | RO | optional | |||||||||
scalar · OCTET STRING (SIZE (32)) · read-only · optional The contents of this object by the designated by the equipment vendors, manufacturers and products it contains special ASCII text messages. | |||||||||||||
| Scommondownload | 1.3.6.1.4.1.17409.1.3.1.20 | INTEGER | RW | mandatory | |||||||||
scalar · INTEGER · read-write · mandatory
| |||||||||||||
| NcommonAdminUseRf | 1.3.6.1.4.1.17409.1.3.2 | ||||||||||||
| NcommonMACGroup | 1.3.6.1.4.1.17409.1.3.2.1 | ||||||||||||
| NcommonMacAddress | 1.3.6.1.4.1.17409.1.3.2.1.1 | ||||||||||||
| ScommonPhysAddress | 1.3.6.1.4.1.17409.1.3.2.1.1.1 | OCTET STRING | RO | mandatory | |||||||||
scalar · OCTET STRING · read-only · mandatory NE MAC (physical) address. | |||||||||||||
| ScommonMaxMulticastAddresses | 1.3.6.1.4.1.17409.1.3.2.1.1.2 | INTEGER (4..255) | RO | mandatory | |||||||||
scalar · INTEGER (4..255) · read-only · mandatory NE equipment to support the greatest number of multicast addresses. | |||||||||||||
| TcommonMulticastAddressTable | 1.3.6.1.4.1.17409.1.3.2.1.1.3 | NA | mandatory | ||||||||||
table · not-accessible · mandatory Multicast addresses Table, the value of this object should be stored in nonvolatile memory. | |||||||||||||
| RcommonMulticastAddressEntry | 1.3.6.1.4.1.17409.1.3.2.1.1.3.1 | NA | mandatory | ||||||||||
| CcommonMulticastAddressIndex | 1.3.6.1.4.1.17409.1.3.2.1.1.3.1.1 | INTEGER (1..255) | RO | mandatory | |||||||||
column · INTEGER (1..255) · read-only · mandatory Multicast addresses Index. | |||||||||||||
| CcommonMulticastAddressNumber | 1.3.6.1.4.1.17409.1.3.2.1.1.3.1.2 | OCTET STRING (SIZE (6)) | RW | mandatory | |||||||||
column · OCTET STRING (SIZE (6)) · read-write · mandatory Multicast addresses,I/Gbit | |||||||||||||
| NcommonBackoffParams | 1.3.6.1.4.1.17409.1.3.2.1.2 | ||||||||||||
| ScommonBackoffPeriod | 1.3.6.1.4.1.17409.1.3.2.1.2.1 | INTEGER (0..16383) | RW | mandatory | |||||||||
scalar · INTEGER (0..16383) · read-write · mandatory Backoff algorithm benchmark time (ms), initialize the default value of 6 ms. The value of this object should be stored in non-volatile memory. | |||||||||||||
| ScommonACKTimeoutWindow | 1.3.6.1.4.1.17409.1.3.2.1.2.2 | INTEGER (0..255) | RW | mandatory | |||||||||
scalar · INTEGER (0..255) · read-write · mandatory NE awaiting HE overtime to send ACK response time (ms), initialize the default value is 19 ms. The value of this object should be stored in non-volatile memory. | |||||||||||||
| ScommonMaximumMACLayerRetries | 1.3.6.1.4.1.17409.1.3.2.1.2.3 | INTEGER (0..255) | RW | mandatory | |||||||||
scalar · INTEGER (0..255) · read-write · mandatory NE data packets sent the greatest number of re-examination. Initialize the default value is 16. The value of this object should be stored in non-volatile memory. | |||||||||||||
| ScommonMaxPayloadSize | 1.3.6.1.4.1.17409.1.3.2.1.2.4 | INTEGER | RO | mandatory | |||||||||
scalar · INTEGER · read-only · mandatory From top to bottom line channel packet supported by the largest payload (payload) the length of. | |||||||||||||
| ScommonBackoffMinimumExponent | 1.3.6.1.4.1.17409.1.3.2.1.2.5 | INTEGER (0..15) | RW | mandatory | |||||||||
scalar · INTEGER (0..15) · read-write · mandatory The standards body of the MAC layer specification definition of the smallest backoff algorithm index value, default values for 6. This value may not exceed commonBackoffMaximumValue value. The value of this object should be stored in non-volatile memory. | |||||||||||||
| ScommonBackoffMaximumExponent | 1.3.6.1.4.1.17409.1.3.2.1.2.6 | INTEGER (0..15) | RW | mandatory | |||||||||
scalar · INTEGER (0..15) · read-write · mandatory The body of the MAC layer standard definition of backoff algorithm for standardizing the largest index value, the default value is 15. This value shall be not less than commonBackoffMinimum value. The value of this object should be stored in non-volatile memory. | |||||||||||||
| NcommonMacStats | 1.3.6.1.4.1.17409.1.3.2.1.3 | ||||||||||||
| ScommonForwardPathLOSEvents | 1.3.6.1.4.1.17409.1.3.2.1.3.1 | Counter32 | RW | optional | |||||||||
scalar · Counter32 · read-write · optional LOS downlink channel in the number of reset to 0. | |||||||||||||
| ScommonForwardPathFramingErrors | 1.3.6.1.4.1.17409.1.3.2.1.3.2 | Counter32 | RW | optional | |||||||||
scalar · Counter32 · read-write · optional Downlink Channel frames wrong number reset to 0. | |||||||||||||
| ScommonForwardPathCRCErrors | 1.3.6.1.4.1.17409.1.3.2.1.3.3 | Counter32 | RW | optional | |||||||||
scalar · Counter32 · read-write · optional CRC errors down the number of reset to 0. | |||||||||||||
| ScommonInvalidMacCmds | 1.3.6.1.4.1.17409.1.3.2.1.3.4 | Counter32 | RW | optional | |||||||||
scalar · Counter32 · read-write · optional Invalid MAC layer order wrong number reset to 0. | |||||||||||||
| ScommonBackwardPathCollisionTimes | 1.3.6.1.4.1.17409.1.3.2.1.3.5 | Counter32 | RW | optional | |||||||||
scalar · Counter32 · read-write · optional Uplink Packet collision frequency, reset to 0. | |||||||||||||
| NcommonRfGroup | 1.3.6.1.4.1.17409.1.3.2.2 | ||||||||||||
| ScommonReturnPathFrequency | 1.3.6.1.4.1.17409.1.3.2.2.1 | INTEGER (0..1000000000) | RO | mandatory | |||||||||
scalar · INTEGER (0..1000000000) · read-only · mandatory Channel uplink frequency units Hz. The value of this object should be stored in non-volatile memory. | |||||||||||||
| ScommonForwardPathFrequency | 1.3.6.1.4.1.17409.1.3.2.2.2 | INTEGER (0..1000000000) | RO | mandatory | |||||||||
scalar · INTEGER (0..1000000000) · read-only · mandatory Downlink frequency channel, flat Hz. The value of this object should be stored in non-volatile memory. | |||||||||||||
| ScommonProvisionedReturnPowerLevel | 1.3.6.1.4.1.17409.1.3.2.2.3 | INTEGER (0..127) | RW | mandatory | |||||||||
scalar · INTEGER (0..127) · read-write · mandatory Upstream channel power levels and units for dBuV. When the internal use of this value will be rounded to the nearest support value. Reading return to this subject when the actual value rather than rounding value. The value of this object should be stored in non-volatile memory. | |||||||||||||
| ScommonForwardPathReceiveLevel | 1.3.6.1.4.1.17409.1.3.2.2.4 | INTEGER (0..127) | RO | optional | |||||||||
scalar · INTEGER (0..127) · read-only · optional Downlink Channel receive power levels, units dBuV. | |||||||||||||
| ScommonMaxReturnPower | 1.3.6.1.4.1.17409.1.3.2.2.5 | INTEGER (0..127) | RW | mandatory | |||||||||
scalar · INTEGER (0..127) · read-write · mandatory The largest upstream channel power levels and units for dBuV. The value of this object should be stored in non-volatile memory. | |||||||||||||
| NcommonAdminUseEthernet | 1.3.6.1.4.1.17409.1.3.3 | ||||||||||||
| NcommonAgentGroup | 1.3.6.1.4.1.17409.1.3.3.1 | ||||||||||||
| ScommonAgentBootWay | 1.3.6.1.4.1.17409.1.3.3.1.1 | INTEGER | RW | mandatory | |||||||||
scalar · INTEGER · read-write · mandatory Starting Method Acting
| |||||||||||||
| ScommonAgentReset | 1.3.6.1.4.1.17409.1.3.3.1.2 | INTEGER | RW | mandatory | |||||||||
scalar · INTEGER · read-write · mandatory Acting Restart, write'1 'will enable agents to restart, the value will be included in other non-functional. Reading this object return value'1 ', the agent had no effect on.
| |||||||||||||
| ScommonAgentMaxTraps | 1.3.6.1.4.1.17409.1.3.3.1.3 | INTEGER | RW | mandatory | |||||||||
scalar · INTEGER · read-write · mandatory Acting detected alarm when sent to the management of the largest number of TRAP, 0 that manufacturers use the default default values. | |||||||||||||
| ScommonAgentTrapMinInterval | 1.3.6.1.4.1.17409.1.3.3.1.4 | INTEGER | RW | mandatory | |||||||||
scalar · INTEGER · read-write · mandatory Acting TRAP send the minimum spacing units for s. | |||||||||||||
| ScommonAgentTrapMaxInterval | 1.3.6.1.4.1.17409.1.3.3.1.5 | INTEGER | RW | mandatory | |||||||||
scalar · INTEGER · read-write · mandatory Acting TRAP send the largest spacing units for s. | |||||||||||||
| ScommonTrapAck | 1.3.6.1.4.1.17409.1.3.3.1.6 | OCTET STRING (SIZE (17..255)) | RW | optional | |||||||||
scalar · OCTET STRING (SIZE (17..255)) · read-write · optional The variables used to notify Snmp agents, it issued the warning Trap has received information management console, do not have to re-hair. The content of the variables in alarmLogInformation MIB and the same warning. Agents received after the adoption of alarmLogInformation management can clearly know the host response is a warning which Trap information, thereby stop the alarm information re the Trap. | |||||||||||||
| TcommonAgentTrapTable | 1.3.6.1.4.1.17409.1.3.3.1.7 | NA | mandatory | ||||||||||
table · not-accessible · mandatory Acting Information Table TRAP. | |||||||||||||
| RcommonAgentTrapEntry | 1.3.6.1.4.1.17409.1.3.3.1.7.1 | NA | mandatory | ||||||||||
| CcommonAgentTrapIndex | 1.3.6.1.4.1.17409.1.3.3.1.7.1.1 | INTEGER | RO | mandatory | |||||||||
column · INTEGER · read-only · mandatory TRAP Table Index. | |||||||||||||
| CcommonAgentTrapIP | 1.3.6.1.4.1.17409.1.3.3.1.7.1.2 | IpAddress | RW | mandatory | |||||||||
column · IpAddress · read-write · mandatory When the purpose of the TRAP host's IP address. | |||||||||||||
| CcommonAgentTrapCommunity | 1.3.6.1.4.1.17409.1.3.3.1.7.1.3 | DisplayString (SIZE (0..64)) | RW | mandatory | |||||||||
column · DisplayString (SIZE (0..64)) · read-write · mandatory Send the Community string TRAP. | |||||||||||||
| CcommonAgentTrapStatus | 1.3.6.1.4.1.17409.1.3.3.1.7.1.4 | INTEGER | RW | mandatory | |||||||||
column · INTEGER · read-write · mandatory It said the opening of the TRAP.
| |||||||||||||
| NcommonDeviceGroup | 1.3.6.1.4.1.17409.1.3.3.2 | ||||||||||||
| ScommonDeviceNum | 1.3.6.1.4.1.17409.1.3.3.2.1 | INTEGER | RW | mandatory | |||||||||
scalar · INTEGER · read-write · mandatory The agent said that the current management is the number of devices. | |||||||||||||
| TcommonDeviceInfoTable | 1.3.6.1.4.1.17409.1.3.3.2.2 | NA | mandatory | ||||||||||
table · not-accessible · mandatory Acting is currently public information management equipment List. | |||||||||||||
| RcommonDeviceInfoEntry | 1.3.6.1.4.1.17409.1.3.3.2.2.1 | NA | mandatory | ||||||||||
row · not-accessible · mandatory Acting is currently public information management equipment list Table Head.
| |||||||||||||
| CcommonDeviceSlot | 1.3.6.1.4.1.17409.1.3.3.2.2.1.1 | INTEGER | RO | mandatory | 1 | ||||||||
column · INTEGER · read-only · mandatory Acting is currently under the management of the equipment list of public information table Index. Example values from LibreNMS test devices
| |||||||||||||
| CcommonDevicesID | 1.3.6.1.4.1.17409.1.3.3.2.2.1.2 | OCTET STRING (SIZE (0..40)) | RO | mandatory | EDFA | ||||||||
column · OCTET STRING (SIZE (0..40)) · read-only · mandatory Designated equipment manufacturers logo. Example values from LibreNMS test devices
| |||||||||||||
| CcommonDeviceVendor | 1.3.6.1.4.1.17409.1.3.3.2.2.1.3 | DisplayString (SIZE (0..255)) | RO | mandatory | | ||||||||
column · DisplayString (SIZE (0..255)) · read-only · mandatory Equipment manufacturers. Example values from LibreNMS test devices
| |||||||||||||
| CcommonDeviceModelNumber | 1.3.6.1.4.1.17409.1.3.3.2.2.1.4 | DisplayString (SIZE (0..255)) | RO | mandatory | HA5837A-1x016 | ||||||||
| CcommonDeviceSerialNumber | 1.3.6.1.4.1.17409.1.3.3.2.2.1.5 | DisplayString (SIZE (0..255)) | RO | mandatory | S26-PYA346 | ||||||||
| CcommonDeviceVendorInfo | 1.3.6.1.4.1.17409.1.3.3.2.2.1.6 | DisplayString (SIZE (0..255)) | RO | optional | | ||||||||
| CcommonDeviceStatus | 1.3.6.1.4.1.17409.1.3.3.2.2.1.7 | OCTET STRING (SIZE (1)) | RO | mandatory | 10 | ||||||||
column · OCTET STRING (SIZE (1)) · read-only · mandatory The state equipment
Bit 0: RSVD0
Bit 1: RSVD1
Bit 2: RSVD2
Bit 3: MAJOR ALARMS
Bit 4: MINOR ALARMS
Bit 5: RSVD5
Bit 6: RSVD6
Bit 7: RSVD7Example values from LibreNMS test devices
| |||||||||||||
| CcommonDeviceReset | 1.3.6.1.4.1.17409.1.3.3.2.2.1.8 | INTEGER | RW | mandatory | 0 | ||||||||
column · INTEGER · read-write · mandatory Write'1 'will be reset equipment, other values will be written into the non-functional. Reading this object return value'1 ', had no effect on equipment.
Example values from LibreNMS test devices
| |||||||||||||
| CcommonDeviceAlarmDetectionControl | 1.3.6.1.4.1.17409.1.3.3.2.2.1.9 | INTEGER | RW | mandatory | detectionEnabled(2) | ||||||||
column · INTEGER · read-write · mandatory This object used to control equipment Alarm Detection.
Example values from LibreNMS test devices
| |||||||||||||
| CcommonDeviceMACAddress | 1.3.6.1.4.1.17409.1.3.3.2.2.1.10 | IpAddress | RO | mandatory | 00:20:18:07:13:01 | ||||||||
column · IpAddress · read-only · mandatory Equipment MAC address. Example values from LibreNMS test devices
| |||||||||||||
| CcommonDeviceTamperStatus | 1.3.6.1.4.1.17409.1.3.3.2.2.1.11 | INTEGER | RO | optional | intact(1) | ||||||||
column · INTEGER · read-only · optional Report of the safety switch equipment (such as whether to open up the lid) state that this object is called discrete attributes of a corresponding entry in the table. Intact that normal, expressed alarm compromised.
Example values from LibreNMS test devices
| |||||||||||||
| CcommonDeviceInternalTemperature | 1.3.6.1.4.1.17409.1.3.3.2.2.1.12 | INTEGER (-128..127) | RO | optional | 22 | ||||||||
| CcommonDeviceResetCause | 1.3.6.1.4.1.17409.1.3.3.2.2.1.13 | INTEGER | RO | mandatory | watchdog(4) | ||||||||
column · INTEGER · read-only · mandatory Equipment that the reasons for the recent reduction.
Example values from LibreNMS test devices
| |||||||||||||
| CcommonDeviceCraftStatus | 1.3.6.1.4.1.17409.1.3.3.2.2.1.14 | INTEGER | RO | mandatory | connected(2) | ||||||||
column · INTEGER · read-only · mandatory This object interface that local equipment (such as RS232 or RS485 interface) state.
Example values from LibreNMS test devices
| |||||||||||||
| CcommonDevicesOID | 1.3.6.1.4.1.17409.1.3.3.2.2.1.15 | OBJECT IDENTIFIER | RO | mandatory | 1.3.6.1.4.1.17409.1.11 | ||||||||
column · OBJECT IDENTIFIER · read-only · mandatory Goals identifier string, point to a concrete realization of the equipment. Example values from LibreNMS test devices
| |||||||||||||
| CcommonDeviceAcct | 1.3.6.1.4.1.17409.1.3.3.2.2.1.16 | Counter32 | RO | optional | 0 | ||||||||
column · Counter32 · read-only · optional Equipment that the accumulated work time, units of s. Example values from LibreNMS test devices
| |||||||||||||
| CcommonDeviceName | 1.3.6.1.4.1.17409.1.3.3.2.2.1.17 | DisplayString (SIZE (0..255)) | RO | mandatory | EDFA | ||||||||
column · DisplayString (SIZE (0..255)) · read-only · mandatory Equipment Name. Example values from LibreNMS test devices
| |||||||||||||
| CcommonDeviceMFD | 1.3.6.1.4.1.17409.1.3.3.2.2.1.18 | DisplayString (SIZE (10)) | RO | mandatory | 2018-7-13 | ||||||||
column · DisplayString (SIZE (10)) · read-only · mandatory Date of production equipment. Example values from LibreNMS test devices
| |||||||||||||
| CcommonDeviceFW | 1.3.6.1.4.1.17409.1.3.3.2.2.1.19 | DisplayString (SIZE (0..255)) | RO | mandatory | EDFA | ||||||||
column · DisplayString (SIZE (0..255)) · read-only · mandatory Firmware information equipment. Example values from LibreNMS test devices
| |||||||||||||
| NoaIdent | 1.3.6.1.4.1.17409.1.11 | ||||||||||||
| SoaVendorOID | 1.3.6.1.4.1.17409.1.11.1 | OBJECT IDENTIFIER | RO | optional | |||||||||
scalar · OBJECT IDENTIFIER · read-only · optional This object provides manufacturers of optical amplifier MIB expansion. Without the expansion, this should be targeting at the optical amplifier nodes oaIdent. | |||||||||||||
| SoaOutputOpticalPower | 1.3.6.1.4.1.17409.1.11.2 | INTEGER (0..65535) | RO | mandatory | -355 | ||||||||
| SoaInputOpticalPower | 1.3.6.1.4.1.17409.1.11.3 | INTEGER (-128..127) | RO | mandatory | -10 | ||||||||
| ToaPumpTable | 1.3.6.1.4.1.17409.1.11.4 | NA | mandatory | ||||||||||
table · not-accessible · mandatory EDFA laser pump Information Table. | |||||||||||||
| RoaPumpEntry | 1.3.6.1.4.1.17409.1.11.4.1 | NA | mandatory | ||||||||||
row · not-accessible · mandatory Each laser-pumped optical amplifier Information Table Head.
| |||||||||||||
| CoaPumpIndex | 1.3.6.1.4.1.17409.1.11.4.1.1 | INTEGER | RO | mandatory | 1 | ||||||||
| CoaPumpBIAS | 1.3.6.1.4.1.17409.1.11.4.1.2 | INTEGER (0..65535) | RO | mandatory | 0 | ||||||||
| CoaPumpTEC | 1.3.6.1.4.1.17409.1.11.4.1.3 | INTEGER (-32768..32767) | RO | optional | 2 | ||||||||
| CoaPumpTemp | 1.3.6.1.4.1.17409.1.11.4.1.4 | INTEGER (0..32768) | RO | mandatory | 249 | ||||||||
| SoaNumberDCPowerSupply | 1.3.6.1.4.1.17409.1.11.5 | INTEGER (0..16) | RO | mandatory | |||||||||
scalar · INTEGER (0..16) · read-only · mandatory The number of internal DC power supply, 0 expressed transponder does not support this function. | |||||||||||||
| SoaDCPowerSupplyMode | 1.3.6.1.4.1.17409.1.11.6 | INTEGER | RO | optional | switchedRedundant(2) | ||||||||
scalar · INTEGER · read-only · optional Power supply mode: load sharing, standby switching or an independent power supply.
Example values from LibreNMS test devices
| |||||||||||||
| ToaDCPowerTable | 1.3.6.1.4.1.17409.1.11.7 | NA | mandatory | ||||||||||
table · not-accessible · mandatory DC Power Information Table. | |||||||||||||
| RoaDCPowerEntry | 1.3.6.1.4.1.17409.1.11.7.1 | NA | mandatory | ||||||||||
| CoaDCPowerIndex | 1.3.6.1.4.1.17409.1.11.7.1.1 | INTEGER | RO | mandatory | 1 | ||||||||
| CoaDCPowerVoltage | 1.3.6.1.4.1.17409.1.11.7.1.2 | INTEGER (-32768..32767) | RO | mandatory | 50 | ||||||||
| CoaDCPowerCurrent | 1.3.6.1.4.1.17409.1.11.7.1.3 | INTEGER (0..65535) | RO | mandatory | 0 | ||||||||
| CoaDCPowerName | 1.3.6.1.4.1.17409.1.11.7.1.4 | DisplayString | RO | mandatory | DC1[5VDC1] | ||||||||
column · DisplayString · read-only · mandatory Indicate the name of the power supply, for example: 24 V DC power supply. This field value by the user, should at least be marked with a number of power supply voltage and distinguish between each other. When the object of this table have a warning, that this object should be put into the name of alarmText hfcAlarmEvent traps in the target. | |||||||||||||
| SoaOutputOpticalPowerSet | 1.3.6.1.4.1.17409.1.11.11 | INTEGER (0..65535) | RW | mandatory | |||||||||
scalar · INTEGER (0..65535) · read-write · mandatory The output optical power control ,units to 0.1 dBm | |||||||||||||
| SoaGainSet | 1.3.6.1.4.1.17409.1.11.12 | INTEGER (0..65535) | RW | mandatory | |||||||||
scalar · INTEGER (0..65535) · read-write · mandatory units to 0.1 dB | |||||||||||||
| SpowerSupplyStatusA | 1.3.6.1.4.1.17409.1.11.32 | INTEGER | RO | nominal(1) | |||||||||
scalar · INTEGER · read-only · current Returns the operating status of power supply A.
Example values from LibreNMS test devices
| |||||||||||||
| SpowerSupplyStatusB | 1.3.6.1.4.1.17409.1.11.33 | INTEGER | RO | nominal(1) | |||||||||
scalar · INTEGER · read-only · current Returns the operating status of power supply B.
Example values from LibreNMS test devices
| |||||||||||||
Traps / Notifications
- hfcAlarmEvent
1.3.6.1.4.1.17409.1.0.1 - hfcColdStart
1.3.6.1.4.1.17409.1.0.0 - hfcWarmStart
1.3.6.1.4.1.17409.1.0.2