PDU-MIB
Eaton CorporationThis mib describes the SNMP functions of the Power Distribution Unit by Eaton Corporation.
snmptranslate -m PDU-MIB -Tpsnmpwalk -v2c -c <community> -m PDU-MIB <host> 1.3.6.1.4.1.534Imports
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
|---|---|
| SNMPv2-SMI | Bits, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, Opaque, TimeTicks, Unsigned32, enterprises, iso |
| SNMPv2-TC | DisplayString, MacAddress, PhysAddress, TEXTUAL-CONVENTION |
OID tree
| Name | OID | Type | Access | Status | Example | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Ieaton | 1.3.6.1.4.1.534 | ||||||||||||||||||||
identity This mib describes the SNMP functions of the Power Distribution Unit by Eaton Corporation. | |||||||||||||||||||||
| Nproduct | 1.3.6.1.4.1.534.6 | ||||||||||||||||||||
| Npduagent | 1.3.6.1.4.1.534.6.6 | ||||||||||||||||||||
| Npdu | 1.3.6.1.4.1.534.6.6.6 | ||||||||||||||||||||
| Ntraps | 1.3.6.1.4.1.534.6.6.6.0 | ||||||||||||||||||||
| !rebootStarted | 1.3.6.1.4.1.534.6.6.6.0.1 | ||||||||||||||||||||
| !rebootCompleted | 1.3.6.1.4.1.534.6.6.6.0.2 | ||||||||||||||||||||
| !userLogin | 1.3.6.1.4.1.534.6.6.6.0.3 | ||||||||||||||||||||
| !userLogout | 1.3.6.1.4.1.534.6.6.6.0.4 | ||||||||||||||||||||
| !userAuthenticationFailure | 1.3.6.1.4.1.534.6.6.6.0.5 | ||||||||||||||||||||
notification · current A user authentication attempt failed
| |||||||||||||||||||||
| !userSessionTimeout | 1.3.6.1.4.1.534.6.6.6.0.8 | ||||||||||||||||||||
notification · current A user timed out from the device
| |||||||||||||||||||||
| !userAdded | 1.3.6.1.4.1.534.6.6.6.0.11 | ||||||||||||||||||||
notification · current A user was added to the system
| |||||||||||||||||||||
| !userModified | 1.3.6.1.4.1.534.6.6.6.0.12 | ||||||||||||||||||||
notification · current A user account was modified
| |||||||||||||||||||||
| !userDeleted | 1.3.6.1.4.1.534.6.6.6.0.13 | ||||||||||||||||||||
notification · current A user was deleted from the system
| |||||||||||||||||||||
| !groupAdded | 1.3.6.1.4.1.534.6.6.6.0.14 | ||||||||||||||||||||
notification · current A group was added to the system
| |||||||||||||||||||||
| !groupModified | 1.3.6.1.4.1.534.6.6.6.0.15 | ||||||||||||||||||||
| !groupDeleted | 1.3.6.1.4.1.534.6.6.6.0.16 | ||||||||||||||||||||
notification · current A group was deleted from the system
| |||||||||||||||||||||
| !deviceUpdateStarted | 1.3.6.1.4.1.534.6.6.6.0.20 | ||||||||||||||||||||
notification · current The device update has started
| |||||||||||||||||||||
| !userBlocked | 1.3.6.1.4.1.534.6.6.6.0.22 | ||||||||||||||||||||
notification · current A blocked user tried to log in
| |||||||||||||||||||||
| !powerControl | 1.3.6.1.4.1.534.6.6.6.0.23 | ||||||||||||||||||||
notification · current An outlet has been switched | |||||||||||||||||||||
| !userPasswordChanged | 1.3.6.1.4.1.534.6.6.6.0.24 | ||||||||||||||||||||
notification · current A user password was changed
| |||||||||||||||||||||
| !passwordSettingsChanged | 1.3.6.1.4.1.534.6.6.6.0.28 | ||||||||||||||||||||
notification · current Strong password settings changed
| |||||||||||||||||||||
| !firmwareFileDiscarded | 1.3.6.1.4.1.534.6.6.6.0.36 | ||||||||||||||||||||
| !firmwareValidationFailed | 1.3.6.1.4.1.534.6.6.6.0.38 | ||||||||||||||||||||
| !securityViolation | 1.3.6.1.4.1.534.6.6.6.0.39 | ||||||||||||||||||||
| !logFileCleared | 1.3.6.1.4.1.534.6.6.6.0.41 | ||||||||||||||||||||
| !thresholdAlarm | 1.3.6.1.4.1.534.6.6.6.0.45 | ||||||||||||||||||||
notification · current Configured sensor theshold event. The 'thresholdType' variable will indicate whether or not the threshold triggered or cleared | |||||||||||||||||||||
| !outletGroupingConnectivityLost | 1.3.6.1.4.1.534.6.6.6.0.50 | ||||||||||||||||||||
notification · current Master PDU lost contact with the slave PDU in an outlet grouping configuration.
| |||||||||||||||||||||
| Nboard | 1.3.6.1.4.1.534.6.6.6.1 | ||||||||||||||||||||
| Ninfo | 1.3.6.1.4.1.534.6.6.6.1.1 | ||||||||||||||||||||
| SfirmwareVersion | 1.3.6.1.4.1.534.6.6.6.1.1.1 | DisplayString | RO | 01.01.01 | |||||||||||||||||
scalar · DisplayString · read-only · current The current firmware version Example values from LibreNMS test devices
| |||||||||||||||||||||
| SserialNumber | 1.3.6.1.4.1.534.6.6.6.1.1.2 | DisplayString | RO | ADO3051266 | |||||||||||||||||
scalar · DisplayString · read-only · current The serial number. Example values from LibreNMS test devices
| |||||||||||||||||||||
| SipAddress | 1.3.6.1.4.1.534.6.6.6.1.1.3 | IpAddress | RO | ||||||||||||||||||
scalar · IpAddress · read-only · current The current IP address. A value of 0.0.0.0 indicates an error or an unset option. | |||||||||||||||||||||
| Snetmask | 1.3.6.1.4.1.534.6.6.6.1.1.4 | IpAddress | RO | ||||||||||||||||||
scalar · IpAddress · read-only · current The current Netmask. A value of 0.0.0.0 indicates an error or an unset option. | |||||||||||||||||||||
| Sgateway | 1.3.6.1.4.1.534.6.6.6.1.1.5 | IpAddress | RO | ||||||||||||||||||
scalar · IpAddress · read-only · current The current Gateway. A value of 0.0.0.0 indicates an error or an unset option. | |||||||||||||||||||||
| Smac | 1.3.6.1.4.1.534.6.6.6.1.1.6 | MacAddress | RO | ||||||||||||||||||
scalar · MacAddress · read-only · current The current MAC address. | |||||||||||||||||||||
| ShardwareRev | 1.3.6.1.4.1.534.6.6.6.1.1.7 | Integer32 (0..255) | RO | ||||||||||||||||||
scalar · Integer32 (0..255) · read-only · current The hardware revision number. | |||||||||||||||||||||
| SuserName | 1.3.6.1.4.1.534.6.6.6.1.1.10 | DisplayString | AN | ||||||||||||||||||
scalar · DisplayString · accessible-for-notify · current The login of a user. | |||||||||||||||||||||
| SobjectName | 1.3.6.1.4.1.534.6.6.6.1.1.12 | DisplayString | AN | DBQ145412 | |||||||||||||||||
scalar · DisplayString · accessible-for-notify · current The model type of the device Example values from LibreNMS test devices
| |||||||||||||||||||||
| SobjectInstance | 1.3.6.1.4.1.534.6.6.6.1.1.13 | DisplayString | AN | ||||||||||||||||||
scalar · DisplayString · accessible-for-notify · current The device name | |||||||||||||||||||||
| StargetUser | 1.3.6.1.4.1.534.6.6.6.1.1.14 | DisplayString | AN | ||||||||||||||||||
scalar · DisplayString · accessible-for-notify · current The user record being operated on | |||||||||||||||||||||
| SgroupName | 1.3.6.1.4.1.534.6.6.6.1.1.15 | DisplayString | AN | ||||||||||||||||||
scalar · DisplayString · accessible-for-notify · current The group record being operated on | |||||||||||||||||||||
| SimageVersion | 1.3.6.1.4.1.534.6.6.6.1.1.18 | DisplayString | AN | ||||||||||||||||||
scalar · DisplayString · accessible-for-notify · current The version of the Upgrade image | |||||||||||||||||||||
| SsensorDescr | 1.3.6.1.4.1.534.6.6.6.1.1.19 | DisplayString | AN | ||||||||||||||||||
scalar · DisplayString · accessible-for-notify · current Sensor description indicating which sensor experienced a threshold exceeded event. When applicable the description will indicate the sensor number. | |||||||||||||||||||||
| SthresholdDescr | 1.3.6.1.4.1.534.6.6.6.1.1.20 | DisplayString | AN | ||||||||||||||||||
scalar · DisplayString · accessible-for-notify · current Threshold description indicating which configured threshold has been triggered (or cleared). | |||||||||||||||||||||
| SthresholdSeverity | 1.3.6.1.4.1.534.6.6.6.1.1.21 | DisplayString | AN | ||||||||||||||||||
scalar · DisplayString · accessible-for-notify · current String (Warning, Critical, etc...) indicating the severity of the threshold which has been triggered (or cleared). | |||||||||||||||||||||
| SthresholdEventType | 1.3.6.1.4.1.534.6.6.6.1.1.22 | DisplayString | AN | ||||||||||||||||||
scalar · DisplayString · accessible-for-notify · current String (triggered, cleared) indicating if the threshold event indicates that a configured threshold has been triggered or cleared. | |||||||||||||||||||||
| Sstatus | 1.3.6.1.4.1.534.6.6.6.1.1.23 | DisplayString | AN | ||||||||||||||||||
scalar · DisplayString · accessible-for-notify · current The success status of an operation | |||||||||||||||||||||
| SslaveIpAddress | 1.3.6.1.4.1.534.6.6.6.1.1.24 | IpAddress | RO | ||||||||||||||||||
scalar · IpAddress · read-only · current In a shepherding configuration, this is the IP address of slave PDU. A value of 0.0.0.0 indicates an error or an unset option. | |||||||||||||||||||||
| Noutlets | 1.3.6.1.4.1.534.6.6.6.1.2 | ||||||||||||||||||||
| SoutletCount | 1.3.6.1.4.1.534.6.6.6.1.2.1 | Integer32 | RO | ||||||||||||||||||
scalar · Integer32 · read-only · current The number of outlets (regardless of their current state) present on this pdu. | |||||||||||||||||||||
| ToutletTable | 1.3.6.1.4.1.534.6.6.6.1.2.2 | NA | |||||||||||||||||||
table · not-accessible · current A list of outlet entries. The number of entries is given by the value of outletCount. | |||||||||||||||||||||
| RoutletEntry | 1.3.6.1.4.1.534.6.6.6.1.2.2.1 | NA | |||||||||||||||||||
row · not-accessible · current An outlet entry containing objects at the for a particular outlet.
| |||||||||||||||||||||
| CoutletIndex | 1.3.6.1.4.1.534.6.6.6.1.2.2.1.1 | Integer32 (0..255) | RO | 0 | |||||||||||||||||
column · Integer32 (0..255) · read-only · current A unique value for each outlet. Its value ranges between 1 and the value of outletCount. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CoutletLabel | 1.3.6.1.4.1.534.6.6.6.1.2.2.1.2 | DisplayString | RW | | |||||||||||||||||
column · DisplayString · read-write · current A textual string containing information about the outlet. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CoutletOperationalState | 1.3.6.1.4.1.534.6.6.6.1.2.2.1.3 | INTEGER | RW | on(1) | |||||||||||||||||
column · INTEGER · read-write · current A value for each outlet which describes the operational state of the outlet. It is also used to set the operational state of the outlet
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CoutletCurrent | 1.3.6.1.4.1.534.6.6.6.1.2.2.1.4 | MilliAmps | RO | 0 | |||||||||||||||||
column · MilliAmps · read-only · current A unique value for the current sensor attached to the outlet. This value is reported in milliamps (1/1000th of an amp) Example values from LibreNMS test devices
| |||||||||||||||||||||
| CoutletMaxCurrent | 1.3.6.1.4.1.534.6.6.6.1.2.2.1.5 | MilliAmps | RO | 747 | |||||||||||||||||
column · MilliAmps · read-only · current A unique value for the max. current sensor attached to the outlet. This value is reported in milliamps (1/1000th of an amp) Example values from LibreNMS test devices
| |||||||||||||||||||||
| CoutletVoltage | 1.3.6.1.4.1.534.6.6.6.1.2.2.1.6 | MilliVolts | RO | 244 | |||||||||||||||||
column · MilliVolts · read-only · current A unique value for the voltage sensor attached to the outlet.This value is reported in millivolts (1/1000th of a volt) Example values from LibreNMS test devices
| |||||||||||||||||||||
| CoutletActivePower | 1.3.6.1.4.1.534.6.6.6.1.2.2.1.7 | Watts | RO | 0 | |||||||||||||||||
column · Watts · read-only · current A unique value for the active power sensor attached to the outlet. This value is reported in Watts. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CoutletApparentPower | 1.3.6.1.4.1.534.6.6.6.1.2.2.1.8 | VoltAmps | RO | 0 | |||||||||||||||||
column · VoltAmps · read-only · current A unique value for the apparent power sensor attached to the outlet. This value is reported in Volt-Amps Example values from LibreNMS test devices
| |||||||||||||||||||||
| CoutletPowerFactor | 1.3.6.1.4.1.534.6.6.6.1.2.2.1.9 | PowerFactorPercentage | RO | 5 | |||||||||||||||||
column · PowerFactorPercentage · read-only · current A unique value for the power factor of the outlet. The reading represents a percentage in the range of 0% to 100%. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CoutletCurrentUpperWarning | 1.3.6.1.4.1.534.6.6.6.1.2.2.1.21 | MilliAmps | RW | 8582 | |||||||||||||||||
column · MilliAmps · read-write · current The value of the upper warning (non-critical) current threshold for the outlet. This value is reported in milliamps (1/1000th of an amp) Example values from LibreNMS test devices
| |||||||||||||||||||||
| CoutletCurrentUpperCritical | 1.3.6.1.4.1.534.6.6.6.1.2.2.1.23 | MilliAmps | RW | 9462 | |||||||||||||||||
column · MilliAmps · read-write · current The value of the upper critical current threshold for the outlet. This value is reported in milliamps (1/1000th of an amp) Example values from LibreNMS test devices
| |||||||||||||||||||||
| Nunit | 1.3.6.1.4.1.534.6.6.6.1.3 | ||||||||||||||||||||
| NunitReadings | 1.3.6.1.4.1.534.6.6.6.1.3.1 | ||||||||||||||||||||
| SunitCurrent | 1.3.6.1.4.1.534.6.6.6.1.3.1.1 | MilliAmps | RO | ||||||||||||||||||
scalar · MilliAmps · read-only · current The value for the unit's current sensor in millamps. | |||||||||||||||||||||
| SunitVoltage | 1.3.6.1.4.1.534.6.6.6.1.3.1.2 | MilliVolts | RO | ||||||||||||||||||
scalar · MilliVolts · read-only · current The value for the unit's voltage sensor in millivolts. | |||||||||||||||||||||
| SunitActivePower | 1.3.6.1.4.1.534.6.6.6.1.3.1.3 | Watts | RO | ||||||||||||||||||
scalar · Watts · read-only · current The value for the unit's voltage sensor in volt-amps. | |||||||||||||||||||||
| SunitApparentPower | 1.3.6.1.4.1.534.6.6.6.1.3.1.4 | Watts | RO | ||||||||||||||||||
scalar · Watts · read-only · current The value for the unit's voltage sensor in volt-amps. | |||||||||||||||||||||
| SunitCpuTemp | 1.3.6.1.4.1.534.6.6.6.1.3.1.5 | DegreesCelsius | RO | ||||||||||||||||||
scalar · DegreesCelsius · read-only · current The value for the unit's CPU temperature sensor in degrees Celsius. | |||||||||||||||||||||
| SunitCircuitBreak0State | 1.3.6.1.4.1.534.6.6.6.1.3.1.20 | INTEGER | RO | ||||||||||||||||||
scalar · INTEGER · read-only · current The value for the unit's circuit breaker state sensor 0.
| |||||||||||||||||||||
| SunitCircuitBreak1State | 1.3.6.1.4.1.534.6.6.6.1.3.1.21 | INTEGER | RO | ||||||||||||||||||
scalar · INTEGER · read-only · current The value for the unit's circuit breaker state sensor 1.
| |||||||||||||||||||||
| SunitCircuitBreak2State | 1.3.6.1.4.1.534.6.6.6.1.3.1.22 | INTEGER | RO | ||||||||||||||||||
scalar · INTEGER · read-only · current The value for the unit's circuit breaker state sensor 2.
| |||||||||||||||||||||
| SunitCircuitBreak0Current | 1.3.6.1.4.1.534.6.6.6.1.3.1.40 | MilliAmps | RO | ||||||||||||||||||
scalar · MilliAmps · read-only · current The value for the unit's circuit breaker current sensor 0. | |||||||||||||||||||||
| SunitCircuitBreak1Current | 1.3.6.1.4.1.534.6.6.6.1.3.1.41 | MilliAmps | RO | ||||||||||||||||||
scalar · MilliAmps · read-only · current The value for the unit's circuit breaker current sensor 1. | |||||||||||||||||||||
| SunitCircuitBreak2Current | 1.3.6.1.4.1.534.6.6.6.1.3.1.42 | MilliAmps | RO | ||||||||||||||||||
scalar · MilliAmps · read-only · current The value for the unit's circuit breaker current sensor 2. | |||||||||||||||||||||
| SunitVoltageLowerWarning | 1.3.6.1.4.1.534.6.6.6.1.3.1.60 | MilliVolts | RW | ||||||||||||||||||
scalar · MilliVolts · read-write · current The value of the lower warning (non-critical) unit level voltage threshold. | |||||||||||||||||||||
| SunitVoltageLowerCritical | 1.3.6.1.4.1.534.6.6.6.1.3.1.61 | MilliVolts | RW | ||||||||||||||||||
scalar · MilliVolts · read-write · current The value of the lower critical unit level voltage threshold. | |||||||||||||||||||||
| SunitVoltageUpperWarning | 1.3.6.1.4.1.534.6.6.6.1.3.1.62 | MilliVolts | RW | ||||||||||||||||||
scalar · MilliVolts · read-write · current The value of the upper warning (non-critical) unit level voltage threshold. | |||||||||||||||||||||
| SunitVoltageUpperCritical | 1.3.6.1.4.1.534.6.6.6.1.3.1.63 | MilliVolts | RW | ||||||||||||||||||
scalar · MilliVolts · read-write · current The value of the upper critical unit level voltage threshold. | |||||||||||||||||||||
| SunitCurrentUpperWarning | 1.3.6.1.4.1.534.6.6.6.1.3.1.70 | MilliAmps | RW | ||||||||||||||||||
scalar · MilliAmps · read-write · current The value of the upper warning (non-critical) unit level current threshold. | |||||||||||||||||||||
| SunitCurrentUpperCritical | 1.3.6.1.4.1.534.6.6.6.1.3.1.71 | MilliAmps | RO | ||||||||||||||||||
scalar · MilliAmps · read-only · current The value of the upper critical unit level current threshold. NOTE: This particular threshold is NOT settable | |||||||||||||||||||||
| SunitTempLowerWarning | 1.3.6.1.4.1.534.6.6.6.1.3.1.80 | DegreesCelsius | RW | ||||||||||||||||||
scalar · DegreesCelsius · read-write · current The value of the lower warning (non-critical) unit level temperature threshold. | |||||||||||||||||||||
| SunitTempLowerCritical | 1.3.6.1.4.1.534.6.6.6.1.3.1.81 | DegreesCelsius | RW | ||||||||||||||||||
scalar · DegreesCelsius · read-write · current The value of the lower critical unit level temperature threshold. | |||||||||||||||||||||
| SunitTempUpperWarning | 1.3.6.1.4.1.534.6.6.6.1.3.1.82 | DegreesCelsius | RW | ||||||||||||||||||
scalar · DegreesCelsius · read-write · current The value of the upper warning (non-critical) unit level temperature threshold. | |||||||||||||||||||||
| SunitTempUpperCritical | 1.3.6.1.4.1.534.6.6.6.1.3.1.83 | DegreesCelsius | RW | ||||||||||||||||||
scalar · DegreesCelsius · read-write · current The value of the upper critical unit level temperature threshold. | |||||||||||||||||||||
| Nenvironmental | 1.3.6.1.4.1.534.6.6.6.2 | ||||||||||||||||||||
| StempSensorCount | 1.3.6.1.4.1.534.6.6.6.2.1 | Integer32 | RO | ||||||||||||||||||
scalar · Integer32 · read-only · current The number of external temperature sensors (regardless of their current state) present on this pdu. | |||||||||||||||||||||
| TtempSensorTable | 1.3.6.1.4.1.534.6.6.6.2.2 | NA | |||||||||||||||||||
table · not-accessible · current A list of temperature sensor entries. The number of entries is given by the value of tempSensorCount. | |||||||||||||||||||||
| RtempSensorEntry | 1.3.6.1.4.1.534.6.6.6.2.2.1 | NA | |||||||||||||||||||
row · not-accessible · current An entry containing sensor reading and threshold settings for a particular temperature sensor.
| |||||||||||||||||||||
| CtempSensorIndex | 1.3.6.1.4.1.534.6.6.6.2.2.1.1 | Integer32 (0..255) | RO | ||||||||||||||||||
column · Integer32 (0..255) · read-only · current A unique value for each temperature sensor. Its value ranges between 1 and tempSensorCount. | |||||||||||||||||||||
| CtempSensorLabel | 1.3.6.1.4.1.534.6.6.6.2.2.1.2 | DisplayString | RW | ||||||||||||||||||
column · DisplayString · read-write · current A settable human-readable label for the external temperature sensor. One possible use for this label is to convey sensor location. | |||||||||||||||||||||
| Ctemperature | 1.3.6.1.4.1.534.6.6.6.2.2.1.3 | DegreesCelsius | RO | ||||||||||||||||||
column · DegreesCelsius · read-only · current The value of the external temperature sensor reported in degrees celsius. | |||||||||||||||||||||
| CtempLowerWarning | 1.3.6.1.4.1.534.6.6.6.2.2.1.4 | DegreesCelsius | RW | ||||||||||||||||||
column · DegreesCelsius · read-write · current The value of the lower warning (non-critical) threshold. | |||||||||||||||||||||
| CtempUpperWarning | 1.3.6.1.4.1.534.6.6.6.2.2.1.5 | DegreesCelsius | RW | ||||||||||||||||||
column · DegreesCelsius · read-write · current The value of the upper warning (non-critical) threshold. | |||||||||||||||||||||
| CtempLowerCritical | 1.3.6.1.4.1.534.6.6.6.2.2.1.6 | DegreesCelsius | RW | ||||||||||||||||||
column · DegreesCelsius · read-write · current The value of the lower critical threshold. | |||||||||||||||||||||
| CtempUpperCritical | 1.3.6.1.4.1.534.6.6.6.2.2.1.7 | DegreesCelsius | RW | ||||||||||||||||||
column · DegreesCelsius · read-write · current The value of the upper critical threshold. | |||||||||||||||||||||
| CtempLowerWarningReset | 1.3.6.1.4.1.534.6.6.6.2.2.1.8 | DegreesCelsius | RW | ||||||||||||||||||
column · DegreesCelsius · read-write · current The value of the lower warning (non-critical) reset/hysteresis value. | |||||||||||||||||||||
| CtempUpperWarningReset | 1.3.6.1.4.1.534.6.6.6.2.2.1.9 | DegreesCelsius | RW | ||||||||||||||||||
column · DegreesCelsius · read-write · current The value of the upper warning (non-critical) reset/hysteresis value. | |||||||||||||||||||||
| CtempLowerCriticalReset | 1.3.6.1.4.1.534.6.6.6.2.2.1.10 | DegreesCelsius | RW | ||||||||||||||||||
column · DegreesCelsius · read-write · current The value of the lower critical reset/hysteresis value. | |||||||||||||||||||||
| CtempUpperCriticalReset | 1.3.6.1.4.1.534.6.6.6.2.2.1.11 | DegreesCelsius | RW | ||||||||||||||||||
column · DegreesCelsius · read-write · current The value of the upper critical reset/hysteresis value. | |||||||||||||||||||||
| ShumiditySensorCount | 1.3.6.1.4.1.534.6.6.6.2.3 | Integer32 | RO | ||||||||||||||||||
scalar · Integer32 · read-only · current The number of external humidity sensors (regardless of their current state) present on this pdu. | |||||||||||||||||||||
| ThumiditySensorTable | 1.3.6.1.4.1.534.6.6.6.2.4 | NA | |||||||||||||||||||
table · not-accessible · current A list of humidity sensor entries. The number of entries is given by the value of humiditySensorCount. | |||||||||||||||||||||
| RhumiditySensorEntry | 1.3.6.1.4.1.534.6.6.6.2.4.1 | NA | |||||||||||||||||||
row · not-accessible · current An entry containing sensor reading and threshold settings for a particular humidity sensor.
| |||||||||||||||||||||
| ChumiditySensorIndex | 1.3.6.1.4.1.534.6.6.6.2.4.1.1 | Integer32 (0..255) | RO | ||||||||||||||||||
column · Integer32 (0..255) · read-only · current A unique value for each humidity sensor. Its value ranges between 1 and humiditySensorCount. | |||||||||||||||||||||
| ChumiditySensorLabel | 1.3.6.1.4.1.534.6.6.6.2.4.1.2 | DisplayString | RW | ||||||||||||||||||
column · DisplayString · read-write · current A settable human-readable label for the external humidity sensor. One possible use for this label is to convey sensor location. | |||||||||||||||||||||
| Chumidity | 1.3.6.1.4.1.534.6.6.6.2.4.1.3 | RelativeHumidity | RO | ||||||||||||||||||
column · RelativeHumidity · read-only · current The value of the external humidity sensor reported as relative humidity (a percentage). | |||||||||||||||||||||
| ChumidityLowerWarning | 1.3.6.1.4.1.534.6.6.6.2.4.1.4 | RelativeHumidity | RW | ||||||||||||||||||
column · RelativeHumidity · read-write · current The value of the lower warning (non-critical) threshold. | |||||||||||||||||||||
| ChumidityUpperWarning | 1.3.6.1.4.1.534.6.6.6.2.4.1.5 | RelativeHumidity | RW | ||||||||||||||||||
column · RelativeHumidity · read-write · current The value of the upper warning (non-critical) threshold. | |||||||||||||||||||||
| ChumidityLowerCritical | 1.3.6.1.4.1.534.6.6.6.2.4.1.6 | RelativeHumidity | RW | ||||||||||||||||||
column · RelativeHumidity · read-write · current The value of the lower critical threshold. | |||||||||||||||||||||
| ChumidityUpperCritical | 1.3.6.1.4.1.534.6.6.6.2.4.1.7 | RelativeHumidity | RW | ||||||||||||||||||
column · RelativeHumidity · read-write · current The value of the upper critical threshold. | |||||||||||||||||||||
| ChumidityLowerWarningReset | 1.3.6.1.4.1.534.6.6.6.2.4.1.8 | RelativeHumidity | RW | ||||||||||||||||||
column · RelativeHumidity · read-write · current The value of the lower warning (non-critical) reset/hysteresis value. | |||||||||||||||||||||
| ChumidityUpperWarningReset | 1.3.6.1.4.1.534.6.6.6.2.4.1.9 | RelativeHumidity | RW | ||||||||||||||||||
column · RelativeHumidity · read-write · current The value of the upper warning (non-critical) reset/hysteresis value. | |||||||||||||||||||||
| ChumidityLowerCriticalReset | 1.3.6.1.4.1.534.6.6.6.2.4.1.10 | RelativeHumidity | RW | ||||||||||||||||||
column · RelativeHumidity · read-write · current The value of the lower critical reset/hysteresis value. | |||||||||||||||||||||
| ChumidityUpperCriticalReset | 1.3.6.1.4.1.534.6.6.6.2.4.1.11 | RelativeHumidity | RW | ||||||||||||||||||
column · RelativeHumidity · read-write · current The value of the upper critical reset/hysteresis value. | |||||||||||||||||||||
| Nconformance | 1.3.6.1.4.1.534.6.6.6.9 | ||||||||||||||||||||
| Ncompliances | 1.3.6.1.4.1.534.6.6.6.9.1 | ||||||||||||||||||||
| Mcompliance | 1.3.6.1.4.1.534.6.6.6.9.1.1 | ||||||||||||||||||||
compliance · current The requirements for conformance to the PDU-MIB. | |||||||||||||||||||||
| Ngroups | 1.3.6.1.4.1.534.6.6.6.9.2 | ||||||||||||||||||||
| GinfoGroup | 1.3.6.1.4.1.534.6.6.6.9.2.1 | ||||||||||||||||||||
group · current A collection of objects providing basic information about the pdu. | |||||||||||||||||||||
| GoutletsGroup | 1.3.6.1.4.1.534.6.6.6.9.2.2 | ||||||||||||||||||||
group · current A collection of objects providing basic information about the outlets, including sensor readings. | |||||||||||||||||||||
| GunitSensorsGroup | 1.3.6.1.4.1.534.6.6.6.9.2.4 | ||||||||||||||||||||
group · current A collection of objects providing unit level sensor readings.
| |||||||||||||||||||||
| GexternalTemperatureGroup | 1.3.6.1.4.1.534.6.6.6.9.2.6 | ||||||||||||||||||||
group · current A collection of objects providing external temperature sensor readings and threshold settings. | |||||||||||||||||||||
| GexternalHumidityGroup | 1.3.6.1.4.1.534.6.6.6.9.2.7 | ||||||||||||||||||||
group · current A collection of objects providing external humidity sensor readings and threshold settings. | |||||||||||||||||||||
| GtrapsGroup | 1.3.6.1.4.1.534.6.6.6.9.2.9 | ||||||||||||||||||||
group · current A collection of traps.
| |||||||||||||||||||||
Textual conventions
DegreesCelsiusUnsigned32Data type for reporting sensor readings and thresholds associated with temperature sensors. If the underlying hardware sensor indicates 1 degree Celsius, then the SNMP agent will report a value of 1 degree Celsius. No scaling is performed for this type.
HertzUnsigned32Data type for reporting sensor readings and thresholds associated with frequency sensors. If the underlying hardware sensor indicates 1 Hertz, then the SNMP agent will report a value of 1 Hertz. No scaling is performed for this type.
MilliAmpsUnsigned32Data type for reporting sensor readings and thresholds associated with current sensors. If the underlying hardware sensor indicates 1 amp, then the SNMP agent will report a value of 1000 milliamps. The value is scaled in this manner as a way to deal with floating point types that SNMP does not currently support.
MilliVoltsUnsigned32Data type for reporting sensor readings and thresholds associated with voltage sensors. If the underlying hardware sensor indicates 1 volts, then the SNMP agent will report a value of 1000 millivolts. The value is scaled in this manner as a way to deal with floating point types that SNMP does not currently support.
PowerFactorPercentageUnsigned32 (0..100)Data type for reporting sensor readings and thresholds associated with power factor sensors. The power factor of an AC power system is defined as the ratio of the real or active power to the apparent power and is a number between 0 and 1. A PowerFactorPercentage value is calculated by taking this ratio and multiplying by 100. The power factor is used to indicate how efficiently a particular load is utilizing energy.
RelativeHumidityUnsigned32 (0..100)Data type for reporting sensor readings and thresholds associated with humidity sensors. Relative humidity is expressed as percentage and is defined as the ratio of the partial pressure of water vapor in a gaseous mixture of air and water vapor to the saturated vapor pressure of water at a given temperature.
SensorStateEnumerationINTEGERaboveUpperCritical(4)aboveUpperWarning(2)belowLowerCritical(3)belowLowerWarning(1)ok(0)unavailable(-1)The states a sensor can be in.
SensorTypeEnumerationINTEGERenvironmentalHumidity1(400)environmentalHumidity2(401)environmentalHumidity3(402)environmentalHumidity4(403)environmentalHumidity5(404)environmentalHumidity6(405)environmentalHumidity7(406)environmentalHumidity8(407)environmentalTemp1(300)environmentalTemp2(301)environmentalTemp3(302)environmentalTemp4(303)environmentalTemp5(304)environmentalTemp6(305)environmentalTemp7(306)environmentalTemp8(307)outletActivePower(3)outletApparentPower(4)outletAverageActivePower(6)outletCurrent(0)outletMaxActivePower(5)outletMaxCurrent(1)outletPowerFactor(7)outletVoltage(2)powerBranchCurrent(203)powerBranchFrequency(201)powerBranchTemperature(202)powerBranchVoltage(200)unitActivePower(504)unitApparentPower(505)unitCircuitBreak0Current(600)unitCircuitBreak0State(550)unitCircuitBreak1Current(601)unitCircuitBreak1State(551)unitCircuitBreak2Current(602)unitCircuitBreak2State(552)unitCpuTemp(503)unitMaxRmsCurrent(501)unitRmsCurrent(500)unitVoltage(502)The types a sensor can be.
VoltAmpsUnsigned32Data type for reporting sensor readings and thresholds associated with apparent power sensors. If the underlying hardware sensor indicates 1 volt-amp, then the SNMP agent will report a value of 1 volt-amp. No scaling is performed for this type.
WattsUnsigned32Data type for reporting sensor readings and thresholds associated with active power sensors. If the underlying hardware sensor indicates 1 watt, then the SNMP agent will report a value of 1 watt. No scaling is performed for this type.
Traps / Notifications
- deviceUpdateStarted
1.3.6.1.4.1.534.6.6.6.0.20 - firmwareFileDiscarded
1.3.6.1.4.1.534.6.6.6.0.36 - firmwareValidationFailed
1.3.6.1.4.1.534.6.6.6.0.38 - groupAdded
1.3.6.1.4.1.534.6.6.6.0.14 - groupDeleted
1.3.6.1.4.1.534.6.6.6.0.16 - groupModified
1.3.6.1.4.1.534.6.6.6.0.15 - logFileCleared
1.3.6.1.4.1.534.6.6.6.0.41 - outletGroupingConnectivityLost
1.3.6.1.4.1.534.6.6.6.0.50 - passwordSettingsChanged
1.3.6.1.4.1.534.6.6.6.0.28 - powerControl
1.3.6.1.4.1.534.6.6.6.0.23 - rebootCompleted
1.3.6.1.4.1.534.6.6.6.0.2 - rebootStarted
1.3.6.1.4.1.534.6.6.6.0.1 - securityViolation
1.3.6.1.4.1.534.6.6.6.0.39 - thresholdAlarm
1.3.6.1.4.1.534.6.6.6.0.45 - userAdded
1.3.6.1.4.1.534.6.6.6.0.11 - userAuthenticationFailure
1.3.6.1.4.1.534.6.6.6.0.5 - userBlocked
1.3.6.1.4.1.534.6.6.6.0.22 - userDeleted
1.3.6.1.4.1.534.6.6.6.0.13 - userLogin
1.3.6.1.4.1.534.6.6.6.0.3 - userLogout
1.3.6.1.4.1.534.6.6.6.0.4 - userModified
1.3.6.1.4.1.534.6.6.6.0.12 - userPasswordChanged
1.3.6.1.4.1.534.6.6.6.0.24 - userSessionTimeout
1.3.6.1.4.1.534.6.6.6.0.8