MG-SNMP-UPS-MIB
Merlin Gerinsnmptranslate -m MG-SNMP-UPS-MIB -Tpsnmpwalk -v2c -c <community> -m MG-SNMP-UPS-MIB <host> 1.3.6.1.4.1.705Imports
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
|---|---|
| SNMPv2-SMI | Bits, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, OBJECT-IDENTITY, OBJECT-TYPE, TRAP-TYPE, TimeTicks, Unsigned32, enterprises, iso |
| SNMPv2-TC | DisplayString, PhysAddress, TEXTUAL-CONVENTION |
OID tree
| Name | OID | Type | Access | Status | Example | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| NmerlinGerin | 1.3.6.1.4.1.705 | ||||||||||||||||||||
| Nupsmg | 1.3.6.1.4.1.705.1 | ||||||||||||||||||||
| NupsmgIdent | 1.3.6.1.4.1.705.1.1 | ||||||||||||||||||||
| SupsmgIdentFamilyName | 1.3.6.1.4.1.705.1.1.1 | DisplayString (SIZE (0..32)) | RW | mandatory | Galaxy 7000 | ||||||||||||||||
scalar · DisplayString (SIZE (0..32)) · read-write · mandatory The UPS family name (e.g. `PULSAR', `COMET', `GALAXY', ...). Example values from LibreNMS test devices
| |||||||||||||||||||||
| SupsmgIdentModelName | 1.3.6.1.4.1.705.1.1.2 | DisplayString (SIZE (0..32)) | RW | mandatory | 250000 | ||||||||||||||||
scalar · DisplayString (SIZE (0..32)) · read-write · mandatory The UPS model name (e.g. `PSX20', `SV9', ... ). Example values from LibreNMS test devices
| |||||||||||||||||||||
| SupsmgIdentRevisionLevel | 1.3.6.1.4.1.705.1.1.3 | DisplayString (SIZE (0..32)) | RW | mandatory | |||||||||||||||||
scalar · DisplayString (SIZE (0..32)) · read-write · mandatory The UPS revision level. | |||||||||||||||||||||
| SupsmgIdentFirmwareVersion | 1.3.6.1.4.1.705.1.1.4 | DisplayString (SIZE (0..32)) | RW | mandatory | GDET: BQ-7-AR / DIGIT: EJ-7-AR | ||||||||||||||||
scalar · DisplayString (SIZE (0..32)) · read-write · mandatory The UPS microprocessor firmware version number. Example values from LibreNMS test devices
| |||||||||||||||||||||
| SupsmgIdentUserID | 1.3.6.1.4.1.705.1.1.5 | DisplayString (SIZE (0..32)) | RW | mandatory | |||||||||||||||||
scalar · DisplayString (SIZE (0..32)) · read-write · mandatory The UPS user identification (set by administrator). | |||||||||||||||||||||
| SupsmgIdentInstallationDate | 1.3.6.1.4.1.705.1.1.6 | DisplayString (SIZE (0..32)) | RW | mandatory | |||||||||||||||||
scalar · DisplayString (SIZE (0..32)) · read-write · mandatory The UPS installation date in dd/mm/yy format. | |||||||||||||||||||||
| SupsmgIdentSerialNumber | 1.3.6.1.4.1.705.1.1.7 | DisplayString (SIZE (0..32)) | RW | mandatory | 2Q1L200001 | ||||||||||||||||
scalar · DisplayString (SIZE (0..32)) · read-write · mandatory The UPS manufacturing serial number. Example values from LibreNMS test devices
| |||||||||||||||||||||
| NupsmgManagement | 1.3.6.1.4.1.705.1.2 | ||||||||||||||||||||
| SupsmgManagersNum | 1.3.6.1.4.1.705.1.2.1 | INTEGER | RO | mandatory | |||||||||||||||||
scalar · INTEGER · read-only · mandatory The number of managers that could manage the UPS. | |||||||||||||||||||||
| TupsmgManagersTable | 1.3.6.1.4.1.705.1.2.2 | NA | mandatory | ||||||||||||||||||
table · not-accessible · mandatory The table of managers. | |||||||||||||||||||||
| RupsmgManagersEntry | 1.3.6.1.4.1.705.1.2.2.1 | NA | mandatory | ||||||||||||||||||
row · not-accessible · mandatory The description of a manager entry in the managers table.
| |||||||||||||||||||||
| CmgmanagerIndex | 1.3.6.1.4.1.705.1.2.2.1.1 | INTEGER (1..50) | RO | mandatory | |||||||||||||||||
column · INTEGER (1..50) · read-only · mandatory A unique value for each manager. Its value ranges between 1 and the value of upsmgManagersNum. | |||||||||||||||||||||
| CmgmanagerDeviceNumber | 1.3.6.1.4.1.705.1.2.2.1.2 | INTEGER | RW | mandatory | |||||||||||||||||
column · INTEGER · read-write · mandatory This object is the number of the manager device in the DevicesTable of the Config group. This means that the manager is powered by the UPS. If not the default value is 0. | |||||||||||||||||||||
| CmgmanagerNMSType | 1.3.6.1.4.1.705.1.2.2.1.3 | INTEGER | RW | mandatory | |||||||||||||||||
column · INTEGER · read-write · mandatory The type of manager according to the NMS platform. We include in the manager class all systems which will be notified by the agent via receiving traps (e.g. basic to complex NMS software).
| |||||||||||||||||||||
| CmgmanagerCommType | 1.3.6.1.4.1.705.1.2.2.1.4 | INTEGER | RW | mandatory | |||||||||||||||||
column · INTEGER · read-write · mandatory The level of communication protocol for that manager. Setting this object to value invalid(2) has the effect of invalidating the corresponding entry in the upsmgManagersTable. It is an implementation-specific matter as to wether the agent removes an invalidated entry from the table. Accordingly, management stations must be prepared to receive tabular information from agents that corresponds to entry not currently in use. Proper interpretation of such entries requires examination of the relevant mgmanagerCommType object.
| |||||||||||||||||||||
| CmgmanagerDescr | 1.3.6.1.4.1.705.1.2.2.1.5 | DisplayString (SIZE (0..32)) | RW | mandatory | |||||||||||||||||
column · DisplayString (SIZE (0..32)) · read-write · mandatory A textual string containing information about the manager. (manufacturer and version description). | |||||||||||||||||||||
| CmgmanagerAddress | 1.3.6.1.4.1.705.1.2.2.1.6 | IpAddress | RW | mandatory | |||||||||||||||||
column · IpAddress · read-write · mandatory The IP address of the manager station receiving traps. The value of this object is meaningful if and only if the value of the relevant mgmanagerCommType object is snmp type. | |||||||||||||||||||||
| CmgmanagerCommunity | 1.3.6.1.4.1.705.1.2.2.1.7 | DisplayString (SIZE (0..32)) | RW | mandatory | |||||||||||||||||
column · DisplayString (SIZE (0..32)) · read-write · mandatory The manager community string. | |||||||||||||||||||||
| CmgmanagerSeverityLevel | 1.3.6.1.4.1.705.1.2.2.1.8 | INTEGER | RW | mandatory | |||||||||||||||||
column · INTEGER · read-write · mandatory The severity level of traps to be received by this manager. | |||||||||||||||||||||
| CmgmanagerTrapAck | 1.3.6.1.4.1.705.1.2.2.1.9 | INTEGER | RW | mandatory | |||||||||||||||||
column · INTEGER · read-write · mandatory The manager Trap Acknowledgement status. Setting this object to mgnoack(2) or stdnomg(3) or cpqnoack(5) disables the trap acknowledgement from the related manager. The MG enterprise specific trap should then be sent only once by the agent to this manager in case of mgnoack(2), and should not be sent by the agent to this manager in case of stdnomg(3) or cpqnoack(5). mgack(1) allows a basic mecanism for acknowledged traps using upsmgAgentTrapAck object set by the manager to the enterprise specific number of the trap. mgacks(5) allows the enhanced mecanism using the upsmgAgentTrapSignature object set by the manager to the signature received within the trap var binding.
| |||||||||||||||||||||
| NupsmgReceptacle | 1.3.6.1.4.1.705.1.3 | ||||||||||||||||||||
| SupsmgReceptaclesNum | 1.3.6.1.4.1.705.1.3.1 | INTEGER | RO | mandatory | |||||||||||||||||
scalar · INTEGER · read-only · mandatory The total number of receptacles controlled by the UPS. | |||||||||||||||||||||
| TupsmgReceptaclesTable | 1.3.6.1.4.1.705.1.3.2 | NA | mandatory | ||||||||||||||||||
table · not-accessible · mandatory The table of receptacles that are controlled by the UPS. | |||||||||||||||||||||
| RupsmgReceptaclesEntry | 1.3.6.1.4.1.705.1.3.2.1 | NA | mandatory | ||||||||||||||||||
| CmgreceptacleIndex | 1.3.6.1.4.1.705.1.3.2.1.1 | INTEGER (1..50) | RO | mandatory | |||||||||||||||||
column · INTEGER (1..50) · read-only · mandatory A unique value for each receptacle. Its value ranges between 1 and the value of upsmgReceptaclesNum. | |||||||||||||||||||||
| CmgreceptacleLevel | 1.3.6.1.4.1.705.1.3.2.1.2 | INTEGER | RW | mandatory | |||||||||||||||||
column · INTEGER · read-write · mandatory The level of receptacle. Setting this object to value invalid(2) has the effect of invalidating the corresponding entry in the upsmgReceptaclesTable. It is an implementation-specific matter as to wether the agent removes an invalidated entry from the table. Accordingly, management stations must be prepared to receive tabular information from agents that corresponds to entry not currently in use. Proper interpretation of such entries requires examination of the relevant receptacleLevel object. Values 1 and 4 are reserved, value 3 is used to identify a simple one-level receptacle, and values greater than 4 represent a group of equivalent receptacles. | |||||||||||||||||||||
| CmgreceptacleType | 1.3.6.1.4.1.705.1.3.2.1.3 | DisplayString (SIZE (0..32)) | RW | mandatory | |||||||||||||||||
column · DisplayString (SIZE (0..32)) · read-write · mandatory A textual string for the receptacle type. | |||||||||||||||||||||
| CmgreceptacleIdent | 1.3.6.1.4.1.705.1.3.2.1.4 | DisplayString (SIZE (0..32)) | RW | mandatory | |||||||||||||||||
column · DisplayString (SIZE (0..32)) · read-write · mandatory A textual string identification for the user. | |||||||||||||||||||||
| CmgreceptacleState | 1.3.6.1.4.1.705.1.3.2.1.5 | INTEGER | RO | mandatory | |||||||||||||||||
column · INTEGER · read-only · mandatory The ON/OFF status of the receptacle.
| |||||||||||||||||||||
| CmgreceptacleReceptacle | 1.3.6.1.4.1.705.1.3.2.1.6 | INTEGER | RW | mandatory | |||||||||||||||||
column · INTEGER · read-write · mandatory The receptacle number of the second level receptacle father. The value of this object is meaningful if and only if the value of the relevant mgreceptacleType object is related to a two-level receptacle class. Otherwise the default value is 0. | |||||||||||||||||||||
| CmgreceptaclePowerCons | 1.3.6.1.4.1.705.1.3.2.1.7 | INTEGER | RW | mandatory | |||||||||||||||||
column · INTEGER · read-write · mandatory The volt-ampere rating of the receptacle. The value of this object is meaningful if and only if the value of the relevant mgreceptacleType object is related to a two-level receptacle class. Otherwise the default value is 0. | |||||||||||||||||||||
| CmgreceptacleOverload | 1.3.6.1.4.1.705.1.3.2.1.8 | INTEGER | RW | mandatory | |||||||||||||||||
column · INTEGER · read-write · mandatory The overload status of the receptacle. The value of this object is meaningful if and only if the value of the relevant mgreceptacleType object is related to a two-level receptacle class. Otherwise the default value is 0. | |||||||||||||||||||||
| CmgreceptacleAutonomy | 1.3.6.1.4.1.705.1.3.2.1.9 | INTEGER | RW | mandatory | |||||||||||||||||
column · INTEGER · read-write · mandatory The receptacle autonomy. The value of this object is meaningful if and only if the value of the relevant mgreceptacleType object is related to a two-level receptacle class. Otherwise the default value is 0. | |||||||||||||||||||||
| NupsmgConfig | 1.3.6.1.4.1.705.1.4 | ||||||||||||||||||||
| SupsmgConfigBatteryInstalled | 1.3.6.1.4.1.705.1.4.1 | INTEGER | RW | mandatory | |||||||||||||||||
scalar · INTEGER · read-write · mandatory The battery installed status.
| |||||||||||||||||||||
| SupsmgConfigNominalBatteryVoltage | 1.3.6.1.4.1.705.1.4.2 | INTEGER | RW | mandatory | |||||||||||||||||
scalar · INTEGER · read-write · mandatory The nominal battery voltage. | |||||||||||||||||||||
| SupsmgConfigNominalBatteryTime | 1.3.6.1.4.1.705.1.4.3 | INTEGER | RW | mandatory | |||||||||||||||||
scalar · INTEGER · read-write · mandatory The full load battery autonomy time. | |||||||||||||||||||||
| SupsmgConfigNominalRechargeTime | 1.3.6.1.4.1.705.1.4.4 | INTEGER | RW | mandatory | |||||||||||||||||
scalar · INTEGER · read-write · mandatory The recharge time to go from low battery cut off to full charge at full load. | |||||||||||||||||||||
| SupsmgConfigMinRechargeLevel | 1.3.6.1.4.1.705.1.4.5 | INTEGER | RW | mandatory | |||||||||||||||||
scalar · INTEGER · read-write · mandatory The minimum battery level required to supply power on the loads after low battery condition turn off and restart on main return. | |||||||||||||||||||||
| SupsmgConfigMaxRechargeTime | 1.3.6.1.4.1.705.1.4.6 | INTEGER | RW | mandatory | |||||||||||||||||
scalar · INTEGER · read-write · mandatory The maximum time delay of battery recharge before supply power to the loads. | |||||||||||||||||||||
| SupsmgConfigLowBatteryTime | 1.3.6.1.4.1.705.1.4.7 | INTEGER | RW | mandatory | 180 | ||||||||||||||||
scalar · INTEGER · read-write · mandatory To set remaining time value for low battery condition. Example values from LibreNMS test devices
| |||||||||||||||||||||
| SupsmgConfigLowBatteryLevel | 1.3.6.1.4.1.705.1.4.8 | INTEGER | RW | mandatory | 20 | ||||||||||||||||
scalar · INTEGER · read-write · mandatory To set battery level value for low battery condition. Example values from LibreNMS test devices
| |||||||||||||||||||||
| SupsmgConfigAutoRestart | 1.3.6.1.4.1.705.1.4.9 | INTEGER | RW | mandatory | always(1) | ||||||||||||||||
scalar · INTEGER · read-write · mandatory The automatic restart enabling status.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| SupsmgConfigShutdownTimer | 1.3.6.1.4.1.705.1.4.10 | INTEGER | RW | mandatory | |||||||||||||||||
scalar · INTEGER · read-write · mandatory To set ups shutdown timer from on battery condition. | |||||||||||||||||||||
| SupsmgConfigSysShutDuration | 1.3.6.1.4.1.705.1.4.11 | INTEGER | RW | mandatory | |||||||||||||||||
scalar · INTEGER · read-write · mandatory To set ups shutdown delay (Sn delay). | |||||||||||||||||||||
| SupsmgConfigVARating | 1.3.6.1.4.1.705.1.4.12 | INTEGER | RW | mandatory | 1000 | ||||||||||||||||
scalar · INTEGER · read-write · mandatory The UPS nominal VA rating. Example values from LibreNMS test devices
| |||||||||||||||||||||
| SupsmgConfigLowTransfer | 1.3.6.1.4.1.705.1.4.13 | INTEGER | RW | mandatory | |||||||||||||||||
scalar · INTEGER · read-write · mandatory The low voltage transfer point. | |||||||||||||||||||||
| SupsmgConfigHighTransfer | 1.3.6.1.4.1.705.1.4.14 | INTEGER | RW | mandatory | |||||||||||||||||
scalar · INTEGER · read-write · mandatory The high voltage transfer point. | |||||||||||||||||||||
| SupsmgConfigOutputNominalVoltage | 1.3.6.1.4.1.705.1.4.15 | INTEGER | RW | mandatory | |||||||||||||||||
scalar · INTEGER · read-write · mandatory The nominal output voltage. | |||||||||||||||||||||
| SupsmgConfigOutputNominalCurrent | 1.3.6.1.4.1.705.1.4.16 | INTEGER | RW | mandatory | |||||||||||||||||
scalar · INTEGER · read-write · mandatory The nominal output current. | |||||||||||||||||||||
| SupsmgConfigOutputNomFrequency | 1.3.6.1.4.1.705.1.4.17 | INTEGER | RW | mandatory | |||||||||||||||||
scalar · INTEGER · read-write · mandatory The nominal output frequency. | |||||||||||||||||||||
| SupsmgConfigByPassType | 1.3.6.1.4.1.705.1.4.18 | INTEGER | RW | mandatory | |||||||||||||||||
scalar · INTEGER · read-write · mandatory The UPS by pass switch type.
| |||||||||||||||||||||
| SupsmgConfigAlarmAudible | 1.3.6.1.4.1.705.1.4.19 | INTEGER | RW | mandatory | |||||||||||||||||
scalar · INTEGER · read-write · mandatory To set audible alarm status.
| |||||||||||||||||||||
| SupsmgConfigAlarmTimeDelay | 1.3.6.1.4.1.705.1.4.20 | INTEGER | RW | mandatory | |||||||||||||||||
scalar · INTEGER · read-write · mandatory To set audible alarm time delay. | |||||||||||||||||||||
| SupsmgConfigDevicesNum | 1.3.6.1.4.1.705.1.4.21 | INTEGER | RW | mandatory | |||||||||||||||||
scalar · INTEGER · read-write · mandatory The number of devices that are powered by the UPS. | |||||||||||||||||||||
| TupsmgConfigDevicesTable | 1.3.6.1.4.1.705.1.4.22 | NA | mandatory | ||||||||||||||||||
table · not-accessible · mandatory The table of devices that are powered by the UPS. | |||||||||||||||||||||
| RupsmgConfigDevicesEntry | 1.3.6.1.4.1.705.1.4.22.1 | NA | mandatory | ||||||||||||||||||
row · not-accessible · mandatory The description of a device entry in the devices table.
| |||||||||||||||||||||
| CmgdeviceIndex | 1.3.6.1.4.1.705.1.4.22.1.1 | INTEGER (1..50) | RO | mandatory | |||||||||||||||||
column · INTEGER (1..50) · read-only · mandatory A unique value for each device. Its value ranges between 1 and the value of upsmgDevicesNum. | |||||||||||||||||||||
| CmgdeviceReceptacleNum | 1.3.6.1.4.1.705.1.4.22.1.2 | INTEGER | RW | mandatory | |||||||||||||||||
column · INTEGER · read-write · mandatory The receptacle number of the device plugged into the UPS. This value gives index entry in the ReceptaclesTable object of the Receptacle group. A value of 0 invalidates the entry in the DevicesTable. | |||||||||||||||||||||
| CmgdeviceIdent | 1.3.6.1.4.1.705.1.4.22.1.3 | DisplayString (SIZE (0..32)) | RW | mandatory | |||||||||||||||||
column · DisplayString (SIZE (0..32)) · read-write · mandatory A textual string for device user identification. | |||||||||||||||||||||
| CmgdeviceVaRating | 1.3.6.1.4.1.705.1.4.22.1.4 | INTEGER | RW | mandatory | |||||||||||||||||
column · INTEGER · read-write · mandatory The volt-ampere rating of the device plugged into the UPS. | |||||||||||||||||||||
| CmgdeviceSequenceOff | 1.3.6.1.4.1.705.1.4.22.1.5 | INTEGER | RW | mandatory | |||||||||||||||||
column · INTEGER · read-write · mandatory To set the device position in the remote shutdown sequence. | |||||||||||||||||||||
| CmgdeviceSequenceOn | 1.3.6.1.4.1.705.1.4.22.1.6 | INTEGER | RW | mandatory | |||||||||||||||||
column · INTEGER · read-write · mandatory To set the device position in the remote reboot sequence. | |||||||||||||||||||||
| CmgdeviceShutdownDuration | 1.3.6.1.4.1.705.1.4.22.1.7 | INTEGER | RW | mandatory | |||||||||||||||||
column · INTEGER · read-write · mandatory To set the duration from start of computer shut-down to complete. | |||||||||||||||||||||
| CmgdeviceBootUpDuration | 1.3.6.1.4.1.705.1.4.22.1.8 | INTEGER | RW | mandatory | |||||||||||||||||
column · INTEGER · read-write · mandatory To set the duration from start of computer boot-up to complete. | |||||||||||||||||||||
| TupsmgConfigReceptaclesTable | 1.3.6.1.4.1.705.1.4.23 | NA | mandatory | ||||||||||||||||||
table · not-accessible · mandatory The table of receptacles. | |||||||||||||||||||||
| RupsmgConfigReceptaclesEntry | 1.3.6.1.4.1.705.1.4.23.1 | NA | mandatory | ||||||||||||||||||
row · not-accessible · mandatory The description of a receptacle entry in the table.
| |||||||||||||||||||||
| CmgreceptacleIndexb | 1.3.6.1.4.1.705.1.4.23.1.1 | INTEGER (1..50) | RO | mandatory | |||||||||||||||||
column · INTEGER (1..50) · read-only · mandatory A unique value for each receptacle. Its value ranges between 1 and the value of upsmgReceptaclesNum. | |||||||||||||||||||||
| CmgreceptacleStateTurnOn | 1.3.6.1.4.1.705.1.4.23.1.2 | INTEGER | RW | mandatory | |||||||||||||||||
column · INTEGER · read-write · mandatory Default return state at turn on.
| |||||||||||||||||||||
| CmgreceptacleStateMainReturn | 1.3.6.1.4.1.705.1.4.23.1.3 | INTEGER | RW | mandatory | |||||||||||||||||
column · INTEGER · read-write · mandatory Default return state on main return.
| |||||||||||||||||||||
| CmgreceptacleStateDischarge | 1.3.6.1.4.1.705.1.4.23.1.4 | INTEGER | RW | mandatory | |||||||||||||||||
column · INTEGER · read-write · mandatory Default return state on main return from battery discharge.
| |||||||||||||||||||||
| CmgreceptacleShutoffLevel | 1.3.6.1.4.1.705.1.4.23.1.5 | INTEGER | RW | mandatory | |||||||||||||||||
column · INTEGER · read-write · mandatory Battery level for starting shutoff sequence. | |||||||||||||||||||||
| CmgreceptacleShutoffTimer | 1.3.6.1.4.1.705.1.4.23.1.6 | INTEGER | RW | mandatory | |||||||||||||||||
column · INTEGER · read-write · mandatory Time delay from on battery for starting shutoff sequence. | |||||||||||||||||||||
| CmgreceptacleRestartLevel | 1.3.6.1.4.1.705.1.4.23.1.7 | INTEGER | RW | mandatory | |||||||||||||||||
column · INTEGER · read-write · mandatory Battery level for starting restart sequence. | |||||||||||||||||||||
| CmgreceptacleRestartDelay | 1.3.6.1.4.1.705.1.4.23.1.8 | INTEGER | RW | mandatory | |||||||||||||||||
column · INTEGER · read-write · mandatory Time delay for starting restart sequence. | |||||||||||||||||||||
| CmgreceptacleShutdownDuration | 1.3.6.1.4.1.705.1.4.23.1.9 | INTEGER | RO | mandatory | |||||||||||||||||
column · INTEGER · read-only · mandatory Maximum Shutdown Duration for systems powered by this plug. | |||||||||||||||||||||
| CmgreceptacleBootUpDuration | 1.3.6.1.4.1.705.1.4.23.1.10 | INTEGER | RO | mandatory | |||||||||||||||||
column · INTEGER · read-only · mandatory Maximum Reboot Duration for systems powered by this plug. | |||||||||||||||||||||
| SupsmgConfigExtAlarmNum | 1.3.6.1.4.1.705.1.4.24 | INTEGER | RO | mandatory | |||||||||||||||||
scalar · INTEGER · read-only · mandatory The number of environ external alarm, value is between 8 and 32.. | |||||||||||||||||||||
| TupsmgConfigExtAlarmTable | 1.3.6.1.4.1.705.1.4.25 | NA | mandatory | ||||||||||||||||||
table · not-accessible · mandatory The table of environmental external alarms. | |||||||||||||||||||||
| RupsmgConfigExtAlarmEntry | 1.3.6.1.4.1.705.1.4.25.1 | NA | mandatory | ||||||||||||||||||
row · not-accessible · mandatory The description of an external alarm in the table.
| |||||||||||||||||||||
| CmgextAlarmIndex | 1.3.6.1.4.1.705.1.4.25.1.1 | INTEGER (1..50) | RO | mandatory | |||||||||||||||||
column · INTEGER (1..50) · read-only · mandatory A unique value for each external alarm. Its value ranges between 1 and the value of upsmgConfigExtAlarmNum. | |||||||||||||||||||||
| CmgextAlarmUID | 1.3.6.1.4.1.705.1.4.25.1.2 | DisplayString (SIZE (0..32)) | RW | mandatory | |||||||||||||||||
column · DisplayString (SIZE (0..32)) · read-write · mandatory A textual string for alarm state user identification. | |||||||||||||||||||||
| SupsmgConfigEmergencyTestFail | 1.3.6.1.4.1.705.1.4.26 | INTEGER | RW | mandatory | |||||||||||||||||
scalar · INTEGER · read-write · mandatory The emergency condition status on Battery test fail.
| |||||||||||||||||||||
| SupsmgConfigEmergencyOnByPass | 1.3.6.1.4.1.705.1.4.27 | INTEGER | RW | mandatory | |||||||||||||||||
scalar · INTEGER · read-write · mandatory The emergency condition status on By Pass.
| |||||||||||||||||||||
| SupsmgConfigEmergencyOverload | 1.3.6.1.4.1.705.1.4.28 | INTEGER | RW | mandatory | |||||||||||||||||
scalar · INTEGER · read-write · mandatory The emergency condition status on overload.
| |||||||||||||||||||||
| TupsmgConfigControlDayTable | 1.3.6.1.4.1.705.1.4.29 | NA | mandatory | ||||||||||||||||||
table · not-accessible · mandatory The table of daily on/off time. | |||||||||||||||||||||
| RupsmgConfigControlDayEntry | 1.3.6.1.4.1.705.1.4.29.1 | NA | mandatory | ||||||||||||||||||
row · not-accessible · mandatory The description of a daily on/off time schedule in the table.
| |||||||||||||||||||||
| CmgcontrolDayIndex | 1.3.6.1.4.1.705.1.4.29.1.1 | INTEGER (1..50) | RO | mandatory | |||||||||||||||||
column · INTEGER (1..50) · read-only · mandatory The day index. It is a number between 1 and 7, 1 for Sunday, 2 for Monday, ... | |||||||||||||||||||||
| CmgcontrolDayOn | 1.3.6.1.4.1.705.1.4.29.1.2 | INTEGER | RW | mandatory | |||||||||||||||||
column · INTEGER · read-write · mandatory To set daily power on time. Any value greater than 86400 is to disable the Day On. | |||||||||||||||||||||
| CmgcontrolDayOff | 1.3.6.1.4.1.705.1.4.29.1.3 | INTEGER | RW | mandatory | |||||||||||||||||
column · INTEGER · read-write · mandatory To set daily power off time. Any value greater than 86400 is to disable the Day Off. | |||||||||||||||||||||
| SupsmgConfigLowBooster | 1.3.6.1.4.1.705.1.4.30 | INTEGER | RW | mandatory | |||||||||||||||||
scalar · INTEGER · read-write · mandatory To set UPS booster low threshold. | |||||||||||||||||||||
| SupsmgConfigHighBooster | 1.3.6.1.4.1.705.1.4.31 | INTEGER | RW | mandatory | |||||||||||||||||
scalar · INTEGER · read-write · mandatory To set UPS booster high threshold. | |||||||||||||||||||||
| SupsmgConfigLowFader | 1.3.6.1.4.1.705.1.4.32 | INTEGER | RW | mandatory | |||||||||||||||||
scalar · INTEGER · read-write · mandatory To set UPS fader low threshold. | |||||||||||||||||||||
| SupsmgConfigHighFader | 1.3.6.1.4.1.705.1.4.33 | INTEGER | RW | mandatory | |||||||||||||||||
scalar · INTEGER · read-write · mandatory To set UPS fader high threshold. | |||||||||||||||||||||
| TupsmgConfigEnvironmentTable | 1.3.6.1.4.1.705.1.4.34 | NA | mandatory | ||||||||||||||||||
table · not-accessible · mandatory The table containing the configuration of the environment sensor. | |||||||||||||||||||||
| RupsmgConfigEnvironmentEntry | 1.3.6.1.4.1.705.1.4.34.1 | NA | mandatory | ||||||||||||||||||
row · not-accessible · mandatory The description of an entry in the table. | |||||||||||||||||||||
| CupsmgConfigSensorIndex | 1.3.6.1.4.1.705.1.4.34.1.1 | INTEGER (0..50) | RO | mandatory | 1 | ||||||||||||||||
column · INTEGER (0..50) · read-only · mandatory The sensor index, ranging from 1 to upsmgEnvironmentNum. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CupsmgConfigSensorName | 1.3.6.1.4.1.705.1.4.34.1.2 | DisplayString (SIZE (0..42)) | RW | mandatory | Environment sensor | ||||||||||||||||
column · DisplayString (SIZE (0..42)) · read-write · mandatory The sensor user-friendly name. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CupsmgConfigTemperatureLow | 1.3.6.1.4.1.705.1.4.34.1.3 | INTEGER | RW | mandatory | 5 | ||||||||||||||||
column · INTEGER · read-write · mandatory The low temperature threshold in unit 0.1 Cel. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CupsmgConfigTemperatureHigh | 1.3.6.1.4.1.705.1.4.34.1.4 | INTEGER | RW | mandatory | 40 | ||||||||||||||||
column · INTEGER · read-write · mandatory The high temperature threshold in unit 0.1 Cel. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CupsmgConfigTemperatureHysteresis | 1.3.6.1.4.1.705.1.4.34.1.5 | INTEGER | RW | mandatory | 2 | ||||||||||||||||
column · INTEGER · read-write · mandatory The temperature hysteresys used for threshold test in unit 0.1 Cel. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CupsmgConfigHumidityLow | 1.3.6.1.4.1.705.1.4.34.1.6 | INTEGER | RW | mandatory | 5 | ||||||||||||||||
column · INTEGER · read-write · mandatory The low humidity threshold in unit 1 %. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CupsmgConfigHumidityHigh | 1.3.6.1.4.1.705.1.4.34.1.7 | INTEGER | RW | mandatory | 90 | ||||||||||||||||
column · INTEGER · read-write · mandatory The high humidity threshold in unit 1 %. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CupsmgConfigHumidityHysteresis | 1.3.6.1.4.1.705.1.4.34.1.8 | INTEGER | RW | mandatory | 5 | ||||||||||||||||
column · INTEGER · read-write · mandatory The humidity hysteresys used for threshold test in unit 1 %. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CupsmgConfigInput1Name | 1.3.6.1.4.1.705.1.4.34.1.9 | DisplayString (SIZE (0..22)) | RW | mandatory | Input #1 | ||||||||||||||||
column · DisplayString (SIZE (0..22)) · read-write · mandatory The Input #1 user-friendly name. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CupsmgConfigInput1ClosedLabel | 1.3.6.1.4.1.705.1.4.34.1.10 | DisplayString (SIZE (0..18)) | RW | mandatory | closed | ||||||||||||||||
column · DisplayString (SIZE (0..18)) · read-write · mandatory The Input #1 label for closed position. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CupsmgConfigInput1OpenLabel | 1.3.6.1.4.1.705.1.4.34.1.11 | DisplayString (SIZE (0..18)) | RW | mandatory | open | ||||||||||||||||
column · DisplayString (SIZE (0..18)) · read-write · mandatory The Input #1 label for open position. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CupsmgConfigInput2Name | 1.3.6.1.4.1.705.1.4.34.1.12 | DisplayString (SIZE (0..22)) | RW | mandatory | Input #2 | ||||||||||||||||
column · DisplayString (SIZE (0..22)) · read-write · mandatory The Input #2 user-friendly name. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CupsmgConfigInput2ClosedLabel | 1.3.6.1.4.1.705.1.4.34.1.13 | DisplayString (SIZE (0..18)) | RW | mandatory | closed | ||||||||||||||||
column · DisplayString (SIZE (0..18)) · read-write · mandatory The Input #2 label for closed position. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CupsmgConfigInput2OpenLabel | 1.3.6.1.4.1.705.1.4.34.1.14 | DisplayString (SIZE (0..18)) | RW | mandatory | open | ||||||||||||||||
column · DisplayString (SIZE (0..18)) · read-write · mandatory The Input #2 label for open position. Example values from LibreNMS test devices
| |||||||||||||||||||||
| NupsmgBattery | 1.3.6.1.4.1.705.1.5 | ||||||||||||||||||||
| SupsmgBatteryRemainingTime | 1.3.6.1.4.1.705.1.5.1 | INTEGER | RO | mandatory | 7260 | ||||||||||||||||
scalar · INTEGER · read-only · mandatory The time remaining actual charge vs actual load (dynamic). Example values from LibreNMS test devices
| |||||||||||||||||||||
| SupsmgBatteryLevel | 1.3.6.1.4.1.705.1.5.2 | INTEGER | RO | mandatory | 100 | ||||||||||||||||
scalar · INTEGER · read-only · mandatory The battery level as a percentage of charge. Example values from LibreNMS test devices
| |||||||||||||||||||||
| SupsmgBatteryRechargeTime | 1.3.6.1.4.1.705.1.5.3 | INTEGER | RO | mandatory | |||||||||||||||||
scalar · INTEGER · read-only · mandatory The actual operational battery recharge time to set point equal to upsmgConfigRechargeLevel. This value is computed from upsmgConfigRechargeLevel (level to reach), upsmgBatteryLevel (the actual reached level) and the UPS charge rate. | |||||||||||||||||||||
| SupsmgBatteryRechargeLevel | 1.3.6.1.4.1.705.1.5.4 | INTEGER | RO | mandatory | |||||||||||||||||
scalar · INTEGER · read-only · mandatory The actual value of the battery recharge level that will be reached during the time delay necessary to restart after power returns. This value is computed from upsmgConfigRechargeTime (the delay), upsmgBatteryLevel (the actual level) and the UPS charge rate. | |||||||||||||||||||||
| SupsmgBatteryVoltage | 1.3.6.1.4.1.705.1.5.5 | INTEGER | RO | mandatory | 5940 | ||||||||||||||||
scalar · INTEGER · read-only · mandatory The actual battery voltage. Example values from LibreNMS test devices
| |||||||||||||||||||||
| SupsmgBatteryCurrent | 1.3.6.1.4.1.705.1.5.6 | INTEGER | RO | mandatory | 0 | ||||||||||||||||
scalar · INTEGER · read-only · mandatory The actual battery current. Example values from LibreNMS test devices
| |||||||||||||||||||||
| SupsmgBatteryTemperature | 1.3.6.1.4.1.705.1.5.7 | INTEGER | RO | mandatory | 23 | ||||||||||||||||
scalar · INTEGER · read-only · mandatory The battery temperature. Example values from LibreNMS test devices
| |||||||||||||||||||||
| SupsmgBatteryFullRechargeTime | 1.3.6.1.4.1.705.1.5.8 | INTEGER | RO | mandatory | |||||||||||||||||
scalar · INTEGER · read-only · mandatory The battery full recharge time (from 0 to 100 percent) at current load. | |||||||||||||||||||||
| SupsmgBatteryFaultBattery | 1.3.6.1.4.1.705.1.5.9 | INTEGER | RO | mandatory | no(2) | ||||||||||||||||
scalar · INTEGER · read-only · mandatory The battery fault status.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| SupsmgBatteryNoBattery | 1.3.6.1.4.1.705.1.5.10 | INTEGER | RO | mandatory | |||||||||||||||||
scalar · INTEGER · read-only · mandatory The UPS has no Battery status.
| |||||||||||||||||||||
| SupsmgBatteryReplacement | 1.3.6.1.4.1.705.1.5.11 | INTEGER | RO | mandatory | no(2) | ||||||||||||||||
scalar · INTEGER · read-only · mandatory The UPS Battery to be replaced status.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| SupsmgBatteryUnavailableBattery | 1.3.6.1.4.1.705.1.5.12 | INTEGER | RO | mandatory | |||||||||||||||||
scalar · INTEGER · read-only · mandatory The UPS Battery is unavailable status.
| |||||||||||||||||||||
| SupsmgBatteryNotHighCharge | 1.3.6.1.4.1.705.1.5.13 | INTEGER | RO | mandatory | |||||||||||||||||
scalar · INTEGER · read-only · mandatory The UPS Battery quit high condition status.
| |||||||||||||||||||||
| SupsmgBatteryLowBattery | 1.3.6.1.4.1.705.1.5.14 | INTEGER | RO | mandatory | no(2) | ||||||||||||||||
scalar · INTEGER · read-only · mandatory The battery low status.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| SupsmgBatteryChargerFault | 1.3.6.1.4.1.705.1.5.15 | INTEGER | RO | mandatory | no(2) | ||||||||||||||||
scalar · INTEGER · read-only · mandatory The UPS Battery is not charging status.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| SupsmgBatteryLowCondition | 1.3.6.1.4.1.705.1.5.16 | INTEGER | RO | mandatory | no(2) | ||||||||||||||||
scalar · INTEGER · read-only · mandatory The UPS is at low condition status.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| SupsmgBatteryLowRecharge | 1.3.6.1.4.1.705.1.5.17 | INTEGER | RO | mandatory | |||||||||||||||||
scalar · INTEGER · read-only · mandatory The UPS Battery is not recharged status.
| |||||||||||||||||||||
| NupsmgInput | 1.3.6.1.4.1.705.1.6 | ||||||||||||||||||||
| SupsmgInputPhaseNum | 1.3.6.1.4.1.705.1.6.1 | INTEGER | RO | mandatory | 1 | ||||||||||||||||
scalar · INTEGER · read-only · mandatory The number of input phases. Example values from LibreNMS test devices
| |||||||||||||||||||||
| TupsmgInputPhaseTable | 1.3.6.1.4.1.705.1.6.2 | NA | mandatory | ||||||||||||||||||
table · not-accessible · mandatory The table of input phases. | |||||||||||||||||||||
| RupsmgInputPhaseEntry | 1.3.6.1.4.1.705.1.6.2.1 | NA | mandatory | ||||||||||||||||||
| CmginputIndex | 1.3.6.1.4.1.705.1.6.2.1.1 | INTEGER (1..50) | RO | mandatory | |||||||||||||||||
column · INTEGER (1..50) · read-only · mandatory The input phase voltage index. It is a number between 1 and upsmgInputPhaseNum. | |||||||||||||||||||||
| CmginputVoltage | 1.3.6.1.4.1.705.1.6.2.1.2 | INTEGER | RO | mandatory | 4090 | ||||||||||||||||
column · INTEGER · read-only · mandatory The input phase voltage. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmginputFrequency | 1.3.6.1.4.1.705.1.6.2.1.3 | INTEGER | RO | mandatory | 500 | ||||||||||||||||
column · INTEGER · read-only · mandatory The input phase frequency. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmginputMinimumVoltage | 1.3.6.1.4.1.705.1.6.2.1.4 | INTEGER | RO | mandatory | 500 | ||||||||||||||||
column · INTEGER · read-only · mandatory The input phase minimum voltage over the last minute. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmginputMaximumVoltage | 1.3.6.1.4.1.705.1.6.2.1.5 | INTEGER | RO | mandatory | 0 | ||||||||||||||||
column · INTEGER · read-only · mandatory The input phase maximum voltage over the last minute. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmginputCurrent | 1.3.6.1.4.1.705.1.6.2.1.6 | INTEGER | RO | mandatory | 370 | ||||||||||||||||
column · INTEGER · read-only · mandatory The input phase current. Example values from LibreNMS test devices
| |||||||||||||||||||||
| SupsmgInputBadStatus | 1.3.6.1.4.1.705.1.6.3 | INTEGER | RO | mandatory | no(2) | ||||||||||||||||
scalar · INTEGER · read-only · mandatory The utility power bad voltage or bad frequency status.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| SupsmgInputLineFailCause | 1.3.6.1.4.1.705.1.6.4 | INTEGER | RO | mandatory | no(1) | ||||||||||||||||
scalar · INTEGER · read-only · mandatory The utility power failure cause: no(1) is for no utility failure, outoftolvolt(2) is for voltage out of tolerance, outoftolfreq(3) is for frequency out of tolerance, utilityoff(4) is for no voltage at all.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| NupsmgOutput | 1.3.6.1.4.1.705.1.7 | ||||||||||||||||||||
| SupsmgOutputPhaseNum | 1.3.6.1.4.1.705.1.7.1 | INTEGER | RO | mandatory | 1 | ||||||||||||||||
scalar · INTEGER · read-only · mandatory The number of output phases. Example values from LibreNMS test devices
| |||||||||||||||||||||
| TupsmgOutputPhaseTable | 1.3.6.1.4.1.705.1.7.2 | NA | mandatory | ||||||||||||||||||
table · not-accessible · mandatory The table of output phases. | |||||||||||||||||||||
| RupsmgOutputPhaseEntry | 1.3.6.1.4.1.705.1.7.2.1 | NA | mandatory | ||||||||||||||||||
| CmgoutputPhaseIndex | 1.3.6.1.4.1.705.1.7.2.1.1 | INTEGER (1..50) | RO | mandatory | 1 | ||||||||||||||||
column · INTEGER (1..50) · read-only · mandatory The output phase voltage index. It is a number between 1 and upsmgOutputPhaseNum. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmgoutputVoltage | 1.3.6.1.4.1.705.1.7.2.1.2 | INTEGER | RO | mandatory | 4000 | ||||||||||||||||
column · INTEGER · read-only · mandatory The output phase voltage. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmgoutputFrequency | 1.3.6.1.4.1.705.1.7.2.1.3 | INTEGER | RO | mandatory | 500 | ||||||||||||||||
column · INTEGER · read-only · mandatory The output phase frequency. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmgoutputLoadPerPhase | 1.3.6.1.4.1.705.1.7.2.1.4 | INTEGER | RO | mandatory | 9 | ||||||||||||||||
column · INTEGER · read-only · mandatory The output load per phase. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CmgoutputCurrent | 1.3.6.1.4.1.705.1.7.2.1.5 | INTEGER | RO | mandatory | 350 | ||||||||||||||||
column · INTEGER · read-only · mandatory The output phase current. Example values from LibreNMS test devices
| |||||||||||||||||||||
| SupsmgOutputOnBattery | 1.3.6.1.4.1.705.1.7.3 | INTEGER | RO | mandatory | no(2) | ||||||||||||||||
scalar · INTEGER · read-only · mandatory The UPS on battery / on main status.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| SupsmgOutputOnByPass | 1.3.6.1.4.1.705.1.7.4 | INTEGER | RO | mandatory | no(2) | ||||||||||||||||
scalar · INTEGER · read-only · mandatory The UPS on bypass status.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| SupsmgOutputUnavailableByPass | 1.3.6.1.4.1.705.1.7.5 | INTEGER | RO | mandatory | |||||||||||||||||
scalar · INTEGER · read-only · mandatory The by pass unavailable status.
| |||||||||||||||||||||
| SupsmgOutputNoByPass | 1.3.6.1.4.1.705.1.7.6 | INTEGER | RO | mandatory | |||||||||||||||||
scalar · INTEGER · read-only · mandatory The UPS bypass installed status.
| |||||||||||||||||||||
| SupsmgOutputUtilityOff | 1.3.6.1.4.1.705.1.7.7 | INTEGER | RO | mandatory | no(2) | ||||||||||||||||
scalar · INTEGER · read-only · mandatory The UPS utility off status.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| SupsmgOutputOnBoost | 1.3.6.1.4.1.705.1.7.8 | INTEGER | RO | mandatory | |||||||||||||||||
scalar · INTEGER · read-only · mandatory The UPS on booster status.
| |||||||||||||||||||||
| SupsmgOutputInverterOff | 1.3.6.1.4.1.705.1.7.9 | INTEGER | RO | mandatory | no(2) | ||||||||||||||||
scalar · INTEGER · read-only · mandatory The UPS Inverter on / off status.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| SupsmgOutputOverLoad | 1.3.6.1.4.1.705.1.7.10 | INTEGER | RO | mandatory | no(2) | ||||||||||||||||
scalar · INTEGER · read-only · mandatory The output over load status.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| SupsmgOutputOverTemp | 1.3.6.1.4.1.705.1.7.11 | INTEGER | RO | mandatory | no(2) | ||||||||||||||||
scalar · INTEGER · read-only · mandatory The ups over temperature status.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| SupsmgOutputOnBuck | 1.3.6.1.4.1.705.1.7.12 | INTEGER | RO | mandatory | |||||||||||||||||
scalar · INTEGER · read-only · mandatory The UPS on fader status. | |||||||||||||||||||||
| NupsmgEnviron | 1.3.6.1.4.1.705.1.8 | ||||||||||||||||||||
| SupsmgEnvironAmbientTemp | 1.3.6.1.4.1.705.1.8.1 | INTEGER | RO | mandatory | 0 | ||||||||||||||||
scalar · INTEGER · read-only · mandatory The ambient temperature. Example values from LibreNMS test devices
| |||||||||||||||||||||
| SupsmgEnvironAmbientHumidity | 1.3.6.1.4.1.705.1.8.2 | INTEGER | RO | mandatory | 0 | ||||||||||||||||
scalar · INTEGER · read-only · mandatory The ambient humidity. Example values from LibreNMS test devices
| |||||||||||||||||||||
| TupsmgEnvironExtAlarmTable | 1.3.6.1.4.1.705.1.8.3 | NA | mandatory | ||||||||||||||||||
table · not-accessible · mandatory The table of external alarms. | |||||||||||||||||||||
| RupsmgEnvironExtAlarmEntry | 1.3.6.1.4.1.705.1.8.3.1 | NA | mandatory | ||||||||||||||||||
| CmgalarmNum | 1.3.6.1.4.1.705.1.8.3.1.1 | INTEGER (1..50) | RO | mandatory | |||||||||||||||||
column · INTEGER (1..50) · read-only · mandatory The external alarm number. A number between 1 and upsmgConfigExtAlarmNum. | |||||||||||||||||||||
| CmgalarmState | 1.3.6.1.4.1.705.1.8.3.1.2 | INTEGER | RO | mandatory | |||||||||||||||||
column · INTEGER · read-only · mandatory The external alarm state (active or inactive).
| |||||||||||||||||||||
| SupsmgEnvironSensorNum | 1.3.6.1.4.1.705.1.8.4 | INTEGER | RO | mandatory | |||||||||||||||||
scalar · INTEGER · read-only · mandatory The sensor unit number (0 to 4). | |||||||||||||||||||||
| TupsmgEnvironSensorTable | 1.3.6.1.4.1.705.1.8.5 | NA | mandatory | ||||||||||||||||||
table · not-accessible · mandatory The table of sensor units. | |||||||||||||||||||||
| RupsmgEnvironSensorEntry | 1.3.6.1.4.1.705.1.8.5.1 | NA | mandatory | ||||||||||||||||||
| CmgsensorNum | 1.3.6.1.4.1.705.1.8.5.1.1 | INTEGER (1..50) | RO | mandatory | |||||||||||||||||
column · INTEGER (1..50) · read-only · mandatory The unit number. A number between 1 and 4. | |||||||||||||||||||||
| CmgsensorTemp | 1.3.6.1.4.1.705.1.8.5.1.2 | INTEGER | RO | mandatory | |||||||||||||||||
column · INTEGER · read-only · mandatory The measured temperature of the unit. | |||||||||||||||||||||
| CmgsensorHumidity | 1.3.6.1.4.1.705.1.8.5.1.3 | INTEGER | RO | mandatory | |||||||||||||||||
column · INTEGER · read-only · mandatory The measured humidity of the unit. | |||||||||||||||||||||
| SupsmgEnvironmentNum | 1.3.6.1.4.1.705.1.8.6 | INTEGER | RO | mandatory | 1 | ||||||||||||||||
scalar · INTEGER · read-only · mandatory Number of Environment sensor connected. Example values from LibreNMS test devices
| |||||||||||||||||||||
| TupsmgEnvironmentSensorTable | 1.3.6.1.4.1.705.1.8.7 | NA | mandatory | ||||||||||||||||||
table · not-accessible · mandatory The table containing the measurements and alarms made by Environment sensor units. | |||||||||||||||||||||
| RupsmgEnvironmentSensorEntry | 1.3.6.1.4.1.705.1.8.7.1 | NA | mandatory | ||||||||||||||||||
row · not-accessible · mandatory The description of an entry in the measurement table. | |||||||||||||||||||||
| CupsmgEnvironmentIndex | 1.3.6.1.4.1.705.1.8.7.1.1 | INTEGER (1..50) | RO | mandatory | 1 | ||||||||||||||||
column · INTEGER (1..50) · read-only · mandatory The sensor index, ranging from 1 to upsmgEnvironmentNum. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CupsmgEnvironmentComFailure | 1.3.6.1.4.1.705.1.8.7.1.2 | INTEGER | RO | mandatory | yes(1) | ||||||||||||||||
column · INTEGER · read-only · mandatory The sensor communication failure : yes(1), no(2).
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CupsmgEnvironmentTemperature | 1.3.6.1.4.1.705.1.8.7.1.3 | INTEGER | RO | mandatory | 0 | ||||||||||||||||
column · INTEGER · read-only · mandatory The temperature measurement in unit 0.1 Cel. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CupsmgEnvironmentTemperatureLow | 1.3.6.1.4.1.705.1.8.7.1.4 | INTEGER | RO | mandatory | no(2) | ||||||||||||||||
column · INTEGER · read-only · mandatory Temperature is below low theshold : yes(1), no(2).
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CupsmgEnvironmentTemperatureHigh | 1.3.6.1.4.1.705.1.8.7.1.5 | INTEGER | RO | mandatory | no(2) | ||||||||||||||||
column · INTEGER · read-only · mandatory Temperature is above high threshold : yes(1), no(2).
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CupsmgEnvironmentHumidity | 1.3.6.1.4.1.705.1.8.7.1.6 | INTEGER | RO | mandatory | 0 | ||||||||||||||||
column · INTEGER · read-only · mandatory The humidity measurement in unit 0.1 %. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CupsmgEnvironmentHumidityLow | 1.3.6.1.4.1.705.1.8.7.1.7 | INTEGER | RO | mandatory | no(2) | ||||||||||||||||
column · INTEGER · read-only · mandatory Humidity is below low threshold : yes(1), no(2).
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CupsmgEnvironmentHumidityHigh | 1.3.6.1.4.1.705.1.8.7.1.8 | INTEGER | RO | mandatory | no(2) | ||||||||||||||||
column · INTEGER · read-only · mandatory Humidity is above high threshold : yes(1), no(2).
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CupsmgEnvironmentInput1State | 1.3.6.1.4.1.705.1.8.7.1.9 | INTEGER | RO | mandatory | open(2) | ||||||||||||||||
column · INTEGER · read-only · mandatory State of Input#1 : closed(1), open(2).
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CupsmgEnvironmentInput2State | 1.3.6.1.4.1.705.1.8.7.1.10 | INTEGER | RO | mandatory | open(2) | ||||||||||||||||
column · INTEGER · read-only · mandatory State of Input#2 : closed(1), open(2).
Example values from LibreNMS test devices
| |||||||||||||||||||||
| NupsmgControl | 1.3.6.1.4.1.705.1.9 | ||||||||||||||||||||
| TupsmgControlReceptaclesTable | 1.3.6.1.4.1.705.1.9.1 | NA | mandatory | ||||||||||||||||||
table · not-accessible · mandatory The table of receptacles. | |||||||||||||||||||||
| RupsmgControlReceptaclesEntry | 1.3.6.1.4.1.705.1.9.1.1 | NA | mandatory | ||||||||||||||||||
row · not-accessible · mandatory The description of a receptacle entry in the table.
| |||||||||||||||||||||
| CmgreceptacleIndexc | 1.3.6.1.4.1.705.1.9.1.1.1 | INTEGER (1..50) | RO | mandatory | |||||||||||||||||
column · INTEGER (1..50) · read-only · mandatory A unique value for each receptacle. Its value ranges between 1 and the value of upsmgReceptaclesNum. | |||||||||||||||||||||
| CmgreceptacleOnDelay | 1.3.6.1.4.1.705.1.9.1.1.2 | INTEGER | RW | mandatory | |||||||||||||||||
column · INTEGER · read-write · mandatory Turn on UPS receptacle w/delay=?. | |||||||||||||||||||||
| CmgreceptacleOnCtrl | 1.3.6.1.4.1.705.1.9.1.1.3 | INTEGER | RW | mandatory | |||||||||||||||||
column · INTEGER · read-write · mandatory The receptacle control on action.
| |||||||||||||||||||||
| CmgreceptacleOnStatus | 1.3.6.1.4.1.705.1.9.1.1.4 | INTEGER | RO | mandatory | |||||||||||||||||
column · INTEGER · read-only · mandatory The receptacle control on status.
| |||||||||||||||||||||
| CmgreceptacleOffDelay | 1.3.6.1.4.1.705.1.9.1.1.5 | INTEGER | RW | mandatory | |||||||||||||||||
column · INTEGER · read-write · mandatory Turn off UPS receptacle w/delay=?. | |||||||||||||||||||||
| CmgreceptacleOffCtrl | 1.3.6.1.4.1.705.1.9.1.1.6 | INTEGER | RW | mandatory | |||||||||||||||||
column · INTEGER · read-write · mandatory The receptacle control off action.
| |||||||||||||||||||||
| CmgreceptacleOffStatus | 1.3.6.1.4.1.705.1.9.1.1.7 | INTEGER | RO | mandatory | |||||||||||||||||
column · INTEGER · read-only · mandatory The receptacle control off status.
| |||||||||||||||||||||
| CmgreceptacleToggleDelay | 1.3.6.1.4.1.705.1.9.1.1.8 | INTEGER | RW | mandatory | |||||||||||||||||
column · INTEGER · read-write · mandatory Turn off then on UPS receptacle w/delay=?. | |||||||||||||||||||||
| CmgreceptacleToggleCtrl | 1.3.6.1.4.1.705.1.9.1.1.9 | INTEGER | RW | mandatory | |||||||||||||||||
column · INTEGER · read-write · mandatory The receptacle control toggle action.
| |||||||||||||||||||||
| CmgreceptacleToggleStatus | 1.3.6.1.4.1.705.1.9.1.1.10 | INTEGER | RO | mandatory | |||||||||||||||||
column · INTEGER · read-only · mandatory The receptacle control toggle status.
| |||||||||||||||||||||
| CmgreceptacleToggleDuration | 1.3.6.1.4.1.705.1.9.1.1.11 | INTEGER | RW | mandatory | |||||||||||||||||
column · INTEGER · read-write · mandatory Turn off then on UPS receptacle w/duration=?. | |||||||||||||||||||||
| SupsmgControlDayOff | 1.3.6.1.4.1.705.1.9.2 | INTEGER | RW | mandatory | |||||||||||||||||
scalar · INTEGER · read-write · mandatory The schedule off control object. Default value is none(8). Value 1 means to start scheduled off on Sunday, value 2 to start scheduled off on Monday, and so on.
| |||||||||||||||||||||
| SupsmgControlDayOn | 1.3.6.1.4.1.705.1.9.3 | INTEGER | RW | mandatory | |||||||||||||||||
scalar · INTEGER · read-write · mandatory The schedule on control object. Default value is none(8). Value 1 means to start scheduled on on Sunday, value 2 to start scheduled on on Monday, and so on. This object is meaningfull only for those agent that do not include internal clock. In such a case the object is set by a manager to start the schedule on sequence.
| |||||||||||||||||||||
| NupsmgTest | 1.3.6.1.4.1.705.1.10 | ||||||||||||||||||||
| SupsmgTestBatterySchedule | 1.3.6.1.4.1.705.1.10.1 | INTEGER | RW | mandatory | |||||||||||||||||
scalar · INTEGER · read-write · mandatory The automatic battery test schedule.
| |||||||||||||||||||||
| SupsmgTestDiagnostics | 1.3.6.1.4.1.705.1.10.2 | INTEGER | RW | mandatory | |||||||||||||||||
scalar · INTEGER · read-write · mandatory To run self test diagnostics.
| |||||||||||||||||||||
| SupsmgTestDiagResult | 1.3.6.1.4.1.705.1.10.3 | INTEGER | RO | mandatory | |||||||||||||||||
scalar · INTEGER · read-only · mandatory The automatic test diagnostic result.
| |||||||||||||||||||||
| SupsmgTestBatteryCalibration | 1.3.6.1.4.1.705.1.10.4 | INTEGER | RW | mandatory | |||||||||||||||||
scalar · INTEGER · read-write · mandatory To run battery test calibration.
| |||||||||||||||||||||
| SupsmgTestLastCalibration | 1.3.6.1.4.1.705.1.10.5 | INTEGER | RO | mandatory | |||||||||||||||||
scalar · INTEGER · read-only · mandatory The last battery calibration test date. | |||||||||||||||||||||
| SupsmgTestIndicators | 1.3.6.1.4.1.705.1.10.6 | INTEGER | RW | mandatory | |||||||||||||||||
scalar · INTEGER · read-write · mandatory To run UPS indicators test. | |||||||||||||||||||||
| SupsmgTestCommandLine | 1.3.6.1.4.1.705.1.10.7 | DisplayString (SIZE (0..32)) | RW | mandatory | |||||||||||||||||
scalar · DisplayString (SIZE (0..32)) · read-write · mandatory To send ASCII command line to UPS. | |||||||||||||||||||||
| SupsmgTestCommandReady | 1.3.6.1.4.1.705.1.10.8 | INTEGER | RW | mandatory | |||||||||||||||||
scalar · INTEGER · read-write · mandatory To advise UPS that command line has been prepared.
| |||||||||||||||||||||
| SupsmgTestResponseLine | 1.3.6.1.4.1.705.1.10.9 | DisplayString (SIZE (0..32)) | RO | mandatory | |||||||||||||||||
scalar · DisplayString (SIZE (0..32)) · read-only · mandatory To get ASCII protocol response from UPS. | |||||||||||||||||||||
| SupsmgTestResponseReady | 1.3.6.1.4.1.705.1.10.10 | INTEGER | RO | mandatory | |||||||||||||||||
scalar · INTEGER · read-only · mandatory To advise agent that response line has been received.
| |||||||||||||||||||||
| SupsmgTestBatteryResult | 1.3.6.1.4.1.705.1.10.11 | INTEGER | RO | mandatory | |||||||||||||||||
scalar · INTEGER · read-only · mandatory The test battery result: msuccess(1) is for manual battery test success, ssuccess(3) is for scheduled battery test success, mfailed(2) is for manual battery test failed, sfailed(4) is for scheduled battery test failed.
| |||||||||||||||||||||
| NupsmgTraps | 1.3.6.1.4.1.705.1.11 | ||||||||||||||||||||
| !upsmgBatteryFault | 1.3.6.1.4.1.705.1.11.0.1 | ||||||||||||||||||||
notification Trap UPS Battery entering Fault status. | |||||||||||||||||||||
| !upsmgBatteryOK | 1.3.6.1.4.1.705.1.11.0.2 | ||||||||||||||||||||
notification Trap UPS Battery returned to OK status. | |||||||||||||||||||||
| !upsmgBatteryReplacementIndicated | 1.3.6.1.4.1.705.1.11.0.3 | ||||||||||||||||||||
notification Trap UPS battery need to be replaced. | |||||||||||||||||||||
| !upsmgBatteryReplaceNotIndicated | 1.3.6.1.4.1.705.1.11.0.4 | ||||||||||||||||||||
notification Trap UPS battery does not need to be replaced. | |||||||||||||||||||||
| !upsmgAtLowBattery | 1.3.6.1.4.1.705.1.11.0.5 | ||||||||||||||||||||
notification Trap UPS battery reached low condition. | |||||||||||||||||||||
| !upsmgFromLowBattery | 1.3.6.1.4.1.705.1.11.0.6 | ||||||||||||||||||||
notification Trap UPS battery returned from low condition. | |||||||||||||||||||||
| !upsmgChargerFault | 1.3.6.1.4.1.705.1.11.0.7 | ||||||||||||||||||||
notification Trap UPS battery charger is not active. | |||||||||||||||||||||
| !upsmgChargerOK | 1.3.6.1.4.1.705.1.11.0.8 | ||||||||||||||||||||
notification Trap UPS battery charger is active. | |||||||||||||||||||||
| !upsmgAtLowCondition | 1.3.6.1.4.1.705.1.11.0.9 | ||||||||||||||||||||
| !upsmgFromLowCondition | 1.3.6.1.4.1.705.1.11.0.10 | ||||||||||||||||||||
| !upsmgOnBattery | 1.3.6.1.4.1.705.1.11.0.11 | ||||||||||||||||||||
| !upsmgReturnFromBattery | 1.3.6.1.4.1.705.1.11.0.12 | ||||||||||||||||||||
| !upsmgOnByPass | 1.3.6.1.4.1.705.1.11.0.13 | ||||||||||||||||||||
notification Trap UPS is on by pass. | |||||||||||||||||||||
| !upsmgReturnFromByPass | 1.3.6.1.4.1.705.1.11.0.14 | ||||||||||||||||||||
notification Trap UPS return from by pass. | |||||||||||||||||||||
| !upsmgByPassUnavailable | 1.3.6.1.4.1.705.1.11.0.15 | ||||||||||||||||||||
notification Trap UPS by pass unavailable. | |||||||||||||||||||||
| !upsmgByPassAvailable | 1.3.6.1.4.1.705.1.11.0.16 | ||||||||||||||||||||
notification Trap UPS by pass available. | |||||||||||||||||||||
| !upsmgUtilityFailure | 1.3.6.1.4.1.705.1.11.0.17 | ||||||||||||||||||||
notification Trap UPS utility power failed. | |||||||||||||||||||||
| !upsmgUtilityRestored | 1.3.6.1.4.1.705.1.11.0.18 | ||||||||||||||||||||
notification Trap UPS utility power restored. | |||||||||||||||||||||
| !upsmgOnBoost | 1.3.6.1.4.1.705.1.11.0.19 | ||||||||||||||||||||
notification Trap UPS is on boost. | |||||||||||||||||||||
| !upsmgReturnFromBoost | 1.3.6.1.4.1.705.1.11.0.20 | ||||||||||||||||||||
notification Trap UPS has returned from boost. | |||||||||||||||||||||
| !upsmgOverLoad | 1.3.6.1.4.1.705.1.11.0.21 | ||||||||||||||||||||
notification Trap UPS has overload condition. | |||||||||||||||||||||
| !upsmgLoadOK | 1.3.6.1.4.1.705.1.11.0.22 | ||||||||||||||||||||
notification Trap UPS quit overload condition. | |||||||||||||||||||||
| !upsmgOverTemperature | 1.3.6.1.4.1.705.1.11.0.23 | ||||||||||||||||||||
notification Trap UPS has overtemperature condition. | |||||||||||||||||||||
| !upsmgTemperatureOK | 1.3.6.1.4.1.705.1.11.0.24 | ||||||||||||||||||||
notification Trap UPS quit overtemperature condition. | |||||||||||||||||||||
| !upsmgOnToStart | 1.3.6.1.4.1.705.1.11.0.25 | ||||||||||||||||||||
notification Trap UPS on sequence started. | |||||||||||||||||||||
| !upsmgOnAbort | 1.3.6.1.4.1.705.1.11.0.26 | ||||||||||||||||||||
| !upsmgOnInProgress | 1.3.6.1.4.1.705.1.11.0.27 | ||||||||||||||||||||
notification Trap UPS on sequence in progress in ups. | |||||||||||||||||||||
| !upsmgOnComplete | 1.3.6.1.4.1.705.1.11.0.28 | ||||||||||||||||||||
| !upsmgOffToStart | 1.3.6.1.4.1.705.1.11.0.29 | ||||||||||||||||||||
notification Trap UPS off sequence started. | |||||||||||||||||||||
| !upsmgOffAbort | 1.3.6.1.4.1.705.1.11.0.30 | ||||||||||||||||||||
| !upsmgOffInProgress | 1.3.6.1.4.1.705.1.11.0.31 | ||||||||||||||||||||
notification Trap UPS off sequence in progress in ups. | |||||||||||||||||||||
| !upsmgOffComplete | 1.3.6.1.4.1.705.1.11.0.32 | ||||||||||||||||||||
| !upsmgToggleToStart | 1.3.6.1.4.1.705.1.11.0.33 | ||||||||||||||||||||
notification Trap UPS toggle (off/on) sequence started. | |||||||||||||||||||||
| !upsmgToggleAbort | 1.3.6.1.4.1.705.1.11.0.34 | ||||||||||||||||||||
notification Trap UPS toggle (off/on) sequence cancelled. | |||||||||||||||||||||
| !upsmgToggleInProgress | 1.3.6.1.4.1.705.1.11.0.35 | ||||||||||||||||||||
notification Trap UPS toggle (off/on) sequence in progress in ups. | |||||||||||||||||||||
| !upsmgToggleComplete | 1.3.6.1.4.1.705.1.11.0.36 | ||||||||||||||||||||
notification Trap UPS toggle (off/on) sequence completed. | |||||||||||||||||||||
| !upsmgCommunicationFailure | 1.3.6.1.4.1.705.1.11.0.37 | ||||||||||||||||||||
notification Trap UPS serial communication failed. | |||||||||||||||||||||
| !upsmgCommunicationRestored | 1.3.6.1.4.1.705.1.11.0.38 | ||||||||||||||||||||
notification Trap UPS serial communication restored. | |||||||||||||||||||||
| !upsmgInputBad | 1.3.6.1.4.1.705.1.11.0.39 | ||||||||||||||||||||
notification Trap UPS input has bad condition. | |||||||||||||||||||||
| !upsmgInputOK | 1.3.6.1.4.1.705.1.11.0.40 | ||||||||||||||||||||
notification Trap UPS input quit bad condition. | |||||||||||||||||||||
| !upsmgBatteryUnavailable | 1.3.6.1.4.1.705.1.11.0.41 | ||||||||||||||||||||
notification Trap UPS battery is unavailable. | |||||||||||||||||||||
| !upsmgBatteryAvailable | 1.3.6.1.4.1.705.1.11.0.42 | ||||||||||||||||||||
notification Trap UPS battery return from unavailable condition. | |||||||||||||||||||||
| !upsmgAtLowRecharge | 1.3.6.1.4.1.705.1.11.0.43 | ||||||||||||||||||||
notification Trap UPS waiting for battery charging condition. | |||||||||||||||||||||
| !upsmgFromLowRecharge | 1.3.6.1.4.1.705.1.11.0.44 | ||||||||||||||||||||
notification Trap UPS reached battery charging condition. | |||||||||||||||||||||
| !upsmgDiagnosticTestFail | 1.3.6.1.4.1.705.1.11.0.45 | ||||||||||||||||||||
notification Trap UPS self test failed. | |||||||||||||||||||||
| !upsmgDiagnosticTestOK | 1.3.6.1.4.1.705.1.11.0.46 | ||||||||||||||||||||
notification Trap UPS self test succeeded. | |||||||||||||||||||||
| !upsmgBatteryTestOK | 1.3.6.1.4.1.705.1.11.0.47 | ||||||||||||||||||||
notification Trap UPS passed battery test. | |||||||||||||||||||||
| !upsmgBatteryTestFail | 1.3.6.1.4.1.705.1.11.0.48 | ||||||||||||||||||||
notification Trap UPS failed battery test. | |||||||||||||||||||||
| !upsmgExternalAlarmActive | 1.3.6.1.4.1.705.1.11.0.49 | ||||||||||||||||||||
| !upsmgExternalAlarmInactive | 1.3.6.1.4.1.705.1.11.0.50 | ||||||||||||||||||||
| !upsmgOnBuck | 1.3.6.1.4.1.705.1.11.0.51 | ||||||||||||||||||||
notification Trap UPS is on buck. | |||||||||||||||||||||
| !upsmgReturnFromBuck | 1.3.6.1.4.1.705.1.11.0.52 | ||||||||||||||||||||
notification Trap UPS has returned from buck. | |||||||||||||||||||||
| !upsmgEnvironComFailure | 1.3.6.1.4.1.705.1.11.0.53 | ||||||||||||||||||||
notification Environment Probe communication failure. | |||||||||||||||||||||
| !upsmgEnvironComOK | 1.3.6.1.4.1.705.1.11.0.54 | ||||||||||||||||||||
notification Environment Probe communication restored. | |||||||||||||||||||||
| !upsmgEnvironTemperatureLow | 1.3.6.1.4.1.705.1.11.0.55 | ||||||||||||||||||||
notification Temperature is below low threshold. | |||||||||||||||||||||
| !upsmgEnvironTemperatureHigh | 1.3.6.1.4.1.705.1.11.0.56 | ||||||||||||||||||||
notification Temperature is above high threshold. | |||||||||||||||||||||
| !upsmgEnvironTemperatureOK | 1.3.6.1.4.1.705.1.11.0.57 | ||||||||||||||||||||
notification Temperature is in normal range. | |||||||||||||||||||||
| !upsmgEnvironHumidityLow | 1.3.6.1.4.1.705.1.11.0.58 | ||||||||||||||||||||
notification Humidity is below low threshold. | |||||||||||||||||||||
| !upsmgEnvironHumidityHigh | 1.3.6.1.4.1.705.1.11.0.59 | ||||||||||||||||||||
notification Humidity is above high threshold. | |||||||||||||||||||||
| !upsmgEnvironHumidityOK | 1.3.6.1.4.1.705.1.11.0.60 | ||||||||||||||||||||
notification Humidity is in normal range. | |||||||||||||||||||||
| !upsmgEnvironInput1Closed | 1.3.6.1.4.1.705.1.11.0.61 | ||||||||||||||||||||
notification Input #1 is Closed. | |||||||||||||||||||||
| !upsmgEnvironInput1Open | 1.3.6.1.4.1.705.1.11.0.62 | ||||||||||||||||||||
notification Input #1 is Open. | |||||||||||||||||||||
| !upsmgEnvironInput2Closed | 1.3.6.1.4.1.705.1.11.0.63 | ||||||||||||||||||||
notification Input #2 is Closed. | |||||||||||||||||||||
| !upsmgEnvironInput2Open | 1.3.6.1.4.1.705.1.11.0.64 | ||||||||||||||||||||
notification Input #2 is Open. | |||||||||||||||||||||
| !upsRedundancyLost | 1.3.6.1.4.1.705.1.11.0.65 | ||||||||||||||||||||
notification Redundancy Lost. | |||||||||||||||||||||
| !upsRedundancyOK | 1.3.6.1.4.1.705.1.11.0.66 | ||||||||||||||||||||
notification Redundancy Recovered. | |||||||||||||||||||||
| !upsProtectionLost | 1.3.6.1.4.1.705.1.11.0.67 | ||||||||||||||||||||
notification Protection Lost. | |||||||||||||||||||||
| !upsProtectionOK | 1.3.6.1.4.1.705.1.11.0.68 | ||||||||||||||||||||
notification Protection Recovered. | |||||||||||||||||||||
| NupsmgAgent | 1.3.6.1.4.1.705.1.12 | ||||||||||||||||||||
| SupsmgAgentIpaddress | 1.3.6.1.4.1.705.1.12.1 | IpAddress | RW | mandatory | 10.240.15.71 | ||||||||||||||||
scalar · IpAddress · read-write · mandatory The ip address that NMS can identify the managed device Example values from LibreNMS test devices
| |||||||||||||||||||||
| SupsmgAgentSubnetMask | 1.3.6.1.4.1.705.1.12.2 | IpAddress | RW | mandatory | 255.255.255.128 | ||||||||||||||||
scalar · IpAddress · read-write · mandatory Internet address subnet mask Example values from LibreNMS test devices
| |||||||||||||||||||||
| SupsmgAgentDefGateway | 1.3.6.1.4.1.705.1.12.3 | IpAddress | RW | mandatory | 10.240.15.1 | ||||||||||||||||
scalar · IpAddress · read-write · mandatory The default gateway that allow device managed through routers Example values from LibreNMS test devices
| |||||||||||||||||||||
| SupsmgAgentBaudRate | 1.3.6.1.4.1.705.1.12.4 | INTEGER | RW | mandatory | |||||||||||||||||
scalar · INTEGER · read-write · mandatory the serial port communication speed. only 2400, 4800, and 9600 allowed | |||||||||||||||||||||
| SupsmgAgentPollRate | 1.3.6.1.4.1.705.1.12.5 | INTEGER | RW | mandatory | |||||||||||||||||
scalar · INTEGER · read-write · mandatory The frequency that proxy agent polls the connected UPS in ASCII protocol. (unit : second) | |||||||||||||||||||||
| SupsmgAgentType | 1.3.6.1.4.1.705.1.12.6 | INTEGER | RW | mandatory | deviceEth(1) | ||||||||||||||||
scalar · INTEGER · read-write · mandatory The type of agent.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| SupsmgAgentTrapAlarmDelay | 1.3.6.1.4.1.705.1.12.7 | INTEGER | RW | mandatory | |||||||||||||||||
scalar · INTEGER · read-write · mandatory The interval for the Trap packet retransmission, while the TRAP Acknowledge is implemented and the ack is received within the interval. | |||||||||||||||||||||
| SupsmgAgentTrapAlarmRetry | 1.3.6.1.4.1.705.1.12.8 | INTEGER | RW | mandatory | |||||||||||||||||
scalar · INTEGER · read-write · mandatory The retry count for retransmitting Trap packet while the TRAP acknowledge is implemented. | |||||||||||||||||||||
| SupsmgAgentReset | 1.3.6.1.4.1.705.1.12.9 | INTEGER | RW | mandatory | |||||||||||||||||
scalar · INTEGER · read-write · mandatory The variable initiates reset operation in agent software, ie. warm start. write reset(1) to any one of UPS MIB array, will result in the same reset operation.
| |||||||||||||||||||||
| SupsmgAgentFactReset | 1.3.6.1.4.1.705.1.12.10 | INTEGER | RW | mandatory | |||||||||||||||||
scalar · INTEGER · read-write · mandatory The variable initiates reset operation in agent software, ie. warm start, and load default data (Factory setting) to EEPROM and to runtime parameters associated with the UPS.
| |||||||||||||||||||||
| SupsmgAgentMibVersion | 1.3.6.1.4.1.705.1.12.11 | INTEGER | RO | mandatory | 170 | ||||||||||||||||
scalar · INTEGER · read-only · mandatory The version of the MIB implemented in agent. Example values from LibreNMS test devices
| |||||||||||||||||||||
| SupsmgAgentFirmwareVersion | 1.3.6.1.4.1.705.1.12.12 | DisplayString (SIZE (0..32)) | RO | mandatory | LE | ||||||||||||||||
scalar · DisplayString (SIZE (0..32)) · read-only · mandatory The agent firmware version. Example values from LibreNMS test devices
| |||||||||||||||||||||
| SupsmgAgentCommUPS | 1.3.6.1.4.1.705.1.12.13 | INTEGER | RO | mandatory | 1 | ||||||||||||||||
scalar · INTEGER · read-only · mandatory The status of communication between agent and ups.
Even value means no communication, and odd value
means a certain level of communication with devices
daisy-chained on the serial port. The value is the
following: 1000*NSE + 100*NSW + 10*UPSW + UPST with
UPST is UPS type: 5 if no UPS;
3 if PI (Protocol Interface)
1 if U-Talk UPS;
UPSW is the number of switchable plugs of the UPS;
NSW is the number of UM-Switch devices;
NSE is the number of UM-Sensor devices.Example values from LibreNMS test devices
| |||||||||||||||||||||
| SupsmgAgentTrapAck | 1.3.6.1.4.1.705.1.12.14 | INTEGER | RW | mandatory | |||||||||||||||||
scalar · INTEGER · read-write · mandatory The last Trap number that has been received by UM-View. | |||||||||||||||||||||
| SupsmgAgentAutoLearning | 1.3.6.1.4.1.705.1.12.15 | INTEGER | RW | mandatory | |||||||||||||||||
scalar · INTEGER · read-write · mandatory The enabled/disabled configuration of the Auto Learning process of the agent, default value is yes(1) e.g. enabled.
| |||||||||||||||||||||
| SupsmgAgentBootP | 1.3.6.1.4.1.705.1.12.16 | INTEGER | RW | mandatory | |||||||||||||||||
scalar · INTEGER · read-write · mandatory The enabled/disabled configuration of the BootP process, default value is yes(1) e.g. enabled.
| |||||||||||||||||||||
| SupsmgAgentTFTP | 1.3.6.1.4.1.705.1.12.17 | INTEGER | RW | mandatory | |||||||||||||||||
scalar · INTEGER · read-write · mandatory The enabled/disabled configuration of the TFTP process, default value is no(2) e.g. disabled.
| |||||||||||||||||||||
| SupsmgAgentTrapSignature | 1.3.6.1.4.1.705.1.12.18 | INTEGER | RO | mandatory | |||||||||||||||||
scalar · INTEGER · read-only · mandatory The signature of the trap acknowledged by a manager. | |||||||||||||||||||||
| NupsmgRemote | 1.3.6.1.4.1.705.1.13 | ||||||||||||||||||||
| SupsmgRemoteOnBattery | 1.3.6.1.4.1.705.1.13.1 | INTEGER | RW | mandatory | |||||||||||||||||
scalar · INTEGER · read-write · mandatory An object to inform an ups-less agent that the remote UPS is on autonomy. This object could be set by a management application. | |||||||||||||||||||||
| SupsmgRemoteIpAddress | 1.3.6.1.4.1.705.1.13.2 | IpAddress | RW | mandatory | |||||||||||||||||
scalar · IpAddress · read-write · mandatory An object to give the IP address of the agent managing the remote UPS. This object could be read by managers to perform management of receptacle dependencies between two different agents. | |||||||||||||||||||||
Traps / Notifications
- upsProtectionLost
1.3.6.1.4.1.705.1.11.0.67 - upsProtectionOK
1.3.6.1.4.1.705.1.11.0.68 - upsRedundancyLost
1.3.6.1.4.1.705.1.11.0.65 - upsRedundancyOK
1.3.6.1.4.1.705.1.11.0.66 - upsmgAtLowBattery
1.3.6.1.4.1.705.1.11.0.5 - upsmgAtLowCondition
1.3.6.1.4.1.705.1.11.0.9 - upsmgAtLowRecharge
1.3.6.1.4.1.705.1.11.0.43 - upsmgBatteryAvailable
1.3.6.1.4.1.705.1.11.0.42 - upsmgBatteryFault
1.3.6.1.4.1.705.1.11.0.1 - upsmgBatteryOK
1.3.6.1.4.1.705.1.11.0.2 - upsmgBatteryReplaceNotIndicated
1.3.6.1.4.1.705.1.11.0.4 - upsmgBatteryReplacementIndicated
1.3.6.1.4.1.705.1.11.0.3 - upsmgBatteryTestFail
1.3.6.1.4.1.705.1.11.0.48 - upsmgBatteryTestOK
1.3.6.1.4.1.705.1.11.0.47 - upsmgBatteryUnavailable
1.3.6.1.4.1.705.1.11.0.41 - upsmgByPassAvailable
1.3.6.1.4.1.705.1.11.0.16 - upsmgByPassUnavailable
1.3.6.1.4.1.705.1.11.0.15 - upsmgChargerFault
1.3.6.1.4.1.705.1.11.0.7 - upsmgChargerOK
1.3.6.1.4.1.705.1.11.0.8 - upsmgCommunicationFailure
1.3.6.1.4.1.705.1.11.0.37 - upsmgCommunicationRestored
1.3.6.1.4.1.705.1.11.0.38 - upsmgDiagnosticTestFail
1.3.6.1.4.1.705.1.11.0.45 - upsmgDiagnosticTestOK
1.3.6.1.4.1.705.1.11.0.46 - upsmgEnvironComFailure
1.3.6.1.4.1.705.1.11.0.53 - upsmgEnvironComOK
1.3.6.1.4.1.705.1.11.0.54 - upsmgEnvironHumidityHigh
1.3.6.1.4.1.705.1.11.0.59 - upsmgEnvironHumidityLow
1.3.6.1.4.1.705.1.11.0.58 - upsmgEnvironHumidityOK
1.3.6.1.4.1.705.1.11.0.60 - upsmgEnvironInput1Closed
1.3.6.1.4.1.705.1.11.0.61 - upsmgEnvironInput1Open
1.3.6.1.4.1.705.1.11.0.62 - upsmgEnvironInput2Closed
1.3.6.1.4.1.705.1.11.0.63 - upsmgEnvironInput2Open
1.3.6.1.4.1.705.1.11.0.64 - upsmgEnvironTemperatureHigh
1.3.6.1.4.1.705.1.11.0.56 - upsmgEnvironTemperatureLow
1.3.6.1.4.1.705.1.11.0.55 - upsmgEnvironTemperatureOK
1.3.6.1.4.1.705.1.11.0.57 - upsmgExternalAlarmActive
1.3.6.1.4.1.705.1.11.0.49 - upsmgExternalAlarmInactive
1.3.6.1.4.1.705.1.11.0.50 - upsmgFromLowBattery
1.3.6.1.4.1.705.1.11.0.6 - upsmgFromLowCondition
1.3.6.1.4.1.705.1.11.0.10 - upsmgFromLowRecharge
1.3.6.1.4.1.705.1.11.0.44 - upsmgInputBad
1.3.6.1.4.1.705.1.11.0.39 - upsmgInputOK
1.3.6.1.4.1.705.1.11.0.40 - upsmgLoadOK
1.3.6.1.4.1.705.1.11.0.22 - upsmgOffAbort
1.3.6.1.4.1.705.1.11.0.30 - upsmgOffComplete
1.3.6.1.4.1.705.1.11.0.32 - upsmgOffInProgress
1.3.6.1.4.1.705.1.11.0.31 - upsmgOffToStart
1.3.6.1.4.1.705.1.11.0.29 - upsmgOnAbort
1.3.6.1.4.1.705.1.11.0.26 - upsmgOnBattery
1.3.6.1.4.1.705.1.11.0.11 - upsmgOnBoost
1.3.6.1.4.1.705.1.11.0.19 - upsmgOnBuck
1.3.6.1.4.1.705.1.11.0.51 - upsmgOnByPass
1.3.6.1.4.1.705.1.11.0.13 - upsmgOnComplete
1.3.6.1.4.1.705.1.11.0.28 - upsmgOnInProgress
1.3.6.1.4.1.705.1.11.0.27 - upsmgOnToStart
1.3.6.1.4.1.705.1.11.0.25 - upsmgOverLoad
1.3.6.1.4.1.705.1.11.0.21 - upsmgOverTemperature
1.3.6.1.4.1.705.1.11.0.23 - upsmgReturnFromBattery
1.3.6.1.4.1.705.1.11.0.12 - upsmgReturnFromBoost
1.3.6.1.4.1.705.1.11.0.20 - upsmgReturnFromBuck
1.3.6.1.4.1.705.1.11.0.52 - upsmgReturnFromByPass
1.3.6.1.4.1.705.1.11.0.14 - upsmgTemperatureOK
1.3.6.1.4.1.705.1.11.0.24 - upsmgToggleAbort
1.3.6.1.4.1.705.1.11.0.34 - upsmgToggleComplete
1.3.6.1.4.1.705.1.11.0.36 - upsmgToggleInProgress
1.3.6.1.4.1.705.1.11.0.35 - upsmgToggleToStart
1.3.6.1.4.1.705.1.11.0.33 - upsmgUtilityFailure
1.3.6.1.4.1.705.1.11.0.17 - upsmgUtilityRestored
1.3.6.1.4.1.705.1.11.0.18