EATON-SENSOR-MIB
Eaton CorporationThe MIB module for Eaton Sensors.
snmptranslate -m EATON-SENSOR-MIB -Tpsnmpwalk -v2c -c <community> -m EATON-SENSOR-MIB <host> 1.3.6.1.4.1.534.6.8.1Imports
| EATON-OIDS | sensorAgent |
|---|---|
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | Bits, Counter32, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso |
| SNMPv2-TC | DisplayString, PhysAddress, TEXTUAL-CONVENTION |
OID tree
| Name | OID | Type | Access | Status | Example | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| IeatonSensor | 1.3.6.1.4.1.534.6.8.1 | ||||||||||||||||
identity The MIB module for Eaton Sensors. | |||||||||||||||||
| Nsensor | 1.3.6.1.4.1.534.6.8.1.1 | ||||||||||||||||
| NsensorNotification | 1.3.6.1.4.1.534.6.8.1.1.0 | ||||||||||||||||
| !notifySensorCount | 1.3.6.1.4.1.534.6.8.1.1.0.1 | ||||||||||||||||
notification · current Sent whenever the sensor count changes after a discovery or removing from the UI.
| |||||||||||||||||
| !notifySensorStatus | 1.3.6.1.4.1.534.6.8.1.1.0.2 | ||||||||||||||||
notification · current Sent whenever the sensor status changes.
| |||||||||||||||||
| SsensorCount | 1.3.6.1.4.1.534.6.8.1.1.1 | Integer32 | RO | 1 | |||||||||||||
scalar · Integer32 · read-only · current Number of sensor managed on this device. Example values from LibreNMS test devices
| |||||||||||||||||
| TsensorIdentificationTable | 1.3.6.1.4.1.534.6.8.1.1.2 | NA | |||||||||||||||
table · not-accessible · current A list of sensor devices identification data. The number of entries is given by sensorCount. | |||||||||||||||||
| RsensorIdentificationEntry | 1.3.6.1.4.1.534.6.8.1.1.2.1 | NA | |||||||||||||||
| CsensorIndex | 1.3.6.1.4.1.534.6.8.1.1.2.1.1 | Integer32 (1..3) | AN | 1 | |||||||||||||
column · Integer32 (1..3) · accessible-for-notify · current A unique value for each sensor device. Its value ranges from 1 to sensorCount. Example values from LibreNMS test devices
| |||||||||||||||||
| CsensorUuid | 1.3.6.1.4.1.534.6.8.1.1.2.1.2 | OCTET STRING | RO | 5ab7027b-7342-5f91-a274-067bd1eefa48 | |||||||||||||
column · OCTET STRING · read-only · current A unique uuid value for each sensor device. Example values from LibreNMS test devices
| |||||||||||||||||
| CsensorConnectionType | 1.3.6.1.4.1.534.6.8.1.1.2.1.3 | ProbeConnectionType | RO | 2 | |||||||||||||
column · ProbeConnectionType · read-only · current Sensor connection type with the device that monitors it. Example values from LibreNMS test devices
| |||||||||||||||||
| CsensorAddress | 1.3.6.1.4.1.534.6.8.1.1.2.1.4 | OCTET STRING | RO | 1 | |||||||||||||
column · OCTET STRING · read-only · current Depending of the connection implementation : Modbus Slave Id, BT Mac address, ... Example values from LibreNMS test devices
| |||||||||||||||||
| CsensorMonitoredBy | 1.3.6.1.4.1.534.6.8.1.1.2.1.5 | OBJECT IDENTIFIER | RO | 1.3.6.1.2.1.1.2 | |||||||||||||
column · OBJECT IDENTIFIER · read-only · current Parent oid device where the sensor is connected to and monitored by. Example values from LibreNMS test devices
| |||||||||||||||||
| CsensorManufacturer | 1.3.6.1.4.1.534.6.8.1.1.2.1.6 | OCTET STRING (SIZE (1..31)) | RO | Eaton | |||||||||||||
column · OCTET STRING (SIZE (1..31)) · read-only · current The vendor name of the sensor device. Example values from LibreNMS test devices
| |||||||||||||||||
| CsensorModel | 1.3.6.1.4.1.534.6.8.1.1.2.1.7 | OCTET STRING (SIZE (1..31)) | RO | Eaton EMPDT1H1C2 | |||||||||||||
column · OCTET STRING (SIZE (1..31)) · read-only · current The model name of the sensor device. Example values from LibreNMS test devices
| |||||||||||||||||
| CsensorPartNumber | 1.3.6.1.4.1.534.6.8.1.1.2.1.8 | OCTET STRING (SIZE (1..31)) | RO | EMPDT1H1C2 | |||||||||||||
column · OCTET STRING (SIZE (1..31)) · read-only · current The catalog part number of the sensor device. Example values from LibreNMS test devices
| |||||||||||||||||
| CsensorSerialNumber | 1.3.6.1.4.1.534.6.8.1.1.2.1.9 | OCTET STRING (SIZE (1..31)) | RO | GB13L50200 | |||||||||||||
column · OCTET STRING (SIZE (1..31)) · read-only · current The serial number of the sensor device. Example values from LibreNMS test devices
| |||||||||||||||||
| CsensorFirmwareVersion | 1.3.6.1.4.1.534.6.8.1.1.2.1.10 | OCTET STRING (SIZE (1..31)) | RO | 01.04.0011 | |||||||||||||
column · OCTET STRING (SIZE (1..31)) · read-only · current The firmware version of the sensor device. Example values from LibreNMS test devices
| |||||||||||||||||
| TsensorConfigurationTable | 1.3.6.1.4.1.534.6.8.1.1.3 | NA | |||||||||||||||
table · not-accessible · current A list of sensor devices configuration data. The number of entries is given by sensorCount. | |||||||||||||||||
| RsensorConfigurationEntry | 1.3.6.1.4.1.534.6.8.1.1.3.1 | NA | |||||||||||||||
| CsensorName | 1.3.6.1.4.1.534.6.8.1.1.3.1.1 | OCTET STRING (SIZE (1..31)) | RW | EMPDT1H1C2 @1 | |||||||||||||
column · OCTET STRING (SIZE (1..31)) · read-write · current The friendly name of the sensor device. Example values from LibreNMS test devices
| |||||||||||||||||
| CsensorLocation | 1.3.6.1.4.1.534.6.8.1.1.3.1.2 | OCTET STRING (SIZE (1..31)) | RW | | |||||||||||||
column · OCTET STRING (SIZE (1..31)) · read-write · current The location of the sensor device. Example values from LibreNMS test devices
| |||||||||||||||||
| CsensorPosition | 1.3.6.1.4.1.534.6.8.1.1.3.1.3 | PositionType | RW | ||||||||||||||
column · PositionType · read-write · current The Position by reference to the data center aisle. | |||||||||||||||||
| CsensorElevation | 1.3.6.1.4.1.534.6.8.1.1.3.1.4 | ElevationType | RW | ||||||||||||||
column · ElevationType · read-write · current The Elevation in the rack. | |||||||||||||||||
| CsensorUElevation | 1.3.6.1.4.1.534.6.8.1.1.3.1.5 | Integer32 | RW | ||||||||||||||
column · Integer32 · read-write · current The elevation in the rack in count of U position from the bottom. | |||||||||||||||||
| TsensorMonitoringTable | 1.3.6.1.4.1.534.6.8.1.1.4 | NA | |||||||||||||||
table · not-accessible · current A list of sensor devices monitoring data. The number of entries is given by sensorCount. | |||||||||||||||||
| RsensorMonitoringEntry | 1.3.6.1.4.1.534.6.8.1.1.4.1 | NA | |||||||||||||||
| CsensorStatus | 1.3.6.1.4.1.534.6.8.1.1.4.1.1 | CommunicationStatus | RO | 2 | |||||||||||||
column · CommunicationStatus · read-only · current Indicates how the sensor is communicating or not. Example values from LibreNMS test devices
| |||||||||||||||||
| CsensorStatusSince | 1.3.6.1.4.1.534.6.8.1.1.4.1.2 | UnixTimeStamp | RO | 1625045673 | |||||||||||||
column · UnixTimeStamp · read-only · current UTC time in seconds since 1970/01/01 dating the sensor status last change. Example values from LibreNMS test devices
| |||||||||||||||||
| CsensorTemperatureCount | 1.3.6.1.4.1.534.6.8.1.1.4.1.3 | Integer32 | RO | 1 | |||||||||||||
column · Integer32 · read-only · current Number of temperature probes managed by the sensor device. Example values from LibreNMS test devices
| |||||||||||||||||
| CsensorHumidityCount | 1.3.6.1.4.1.534.6.8.1.1.4.1.4 | Integer32 | RO | 1 | |||||||||||||
column · Integer32 · read-only · current Number of humidity probes managed by the sensor device. Example values from LibreNMS test devices
| |||||||||||||||||
| CsensorDigitalInputCount | 1.3.6.1.4.1.534.6.8.1.1.4.1.5 | Integer32 | RO | 2 | |||||||||||||
column · Integer32 · read-only · current Number of digital input probes managed by the sensor device. Example values from LibreNMS test devices
| |||||||||||||||||
| CsensorAnalogInputCount | 1.3.6.1.4.1.534.6.8.1.1.4.1.6 | Integer32 | RO | ||||||||||||||
column · Integer32 · read-only · current Number of analog input probes managed by the sensor device. | |||||||||||||||||
| Ntemperature | 1.3.6.1.4.1.534.6.8.1.2 | ||||||||||||||||
| NtemperatureNotification | 1.3.6.1.4.1.534.6.8.1.2.0 | ||||||||||||||||
| !notifyTemperatureAlarm | 1.3.6.1.4.1.534.6.8.1.2.0.1 | ||||||||||||||||
notification · current Sent whenever the temperature alarm changes. | |||||||||||||||||
| !notifyTemperatureCommunicationStatus | 1.3.6.1.4.1.534.6.8.1.2.0.2 | ||||||||||||||||
notification · current Sent whenever the temperature communication status changes. Is not implemented when the probe is internal (see temperatureConnectionType). | |||||||||||||||||
| TtemperatureIdentificationTable | 1.3.6.1.4.1.534.6.8.1.2.1 | NA | |||||||||||||||
table · not-accessible · current A list of temperature probe measurements. the number of entries is given by the temperature count. | |||||||||||||||||
| RtemperatureIdentificationEntry | 1.3.6.1.4.1.534.6.8.1.2.1.1 | NA | |||||||||||||||
row · not-accessible · current An entry for a temperature probe identification.
| |||||||||||||||||
| CtemperatureIndex | 1.3.6.1.4.1.534.6.8.1.2.1.1.1 | Integer32 (1..2) | AN | 1 | |||||||||||||
column · Integer32 (1..2) · accessible-for-notify · current A unique value for each temperature probe measurement. Its value ranges from 1 to sensorTemperatureCount. Example values from LibreNMS test devices
| |||||||||||||||||
| CtemperatureUuid | 1.3.6.1.4.1.534.6.8.1.2.1.1.2 | OCTET STRING | RO | f5aa1801-20cc-5824-a427-30da8bd10d08 | |||||||||||||
column · OCTET STRING · read-only · current A unique uuid value for each temperature. Example values from LibreNMS test devices
| |||||||||||||||||
| CtemperatureConnectionType | 1.3.6.1.4.1.534.6.8.1.2.1.1.3 | ProbeConnectionType | RO | 1 | |||||||||||||
column · ProbeConnectionType · read-only · current Probe connection type with the sensor that monitors it. Example values from LibreNMS test devices
| |||||||||||||||||
| TtemperatureConfigurationTable | 1.3.6.1.4.1.534.6.8.1.2.2 | NA | |||||||||||||||
table · not-accessible · current A list of temperature probe configuration. The number of entries is given by sensorTemperatureCount. | |||||||||||||||||
| RtemperatureConfigurationEntry | 1.3.6.1.4.1.534.6.8.1.2.2.1 | NA | |||||||||||||||
row · not-accessible · current An entry for a temperature probe configuration.
| |||||||||||||||||
| CtemperatureName | 1.3.6.1.4.1.534.6.8.1.2.2.1.1 | OCTET STRING (SIZE (1..31)) | RW | EMPDT1H1C2 @1-T1 | |||||||||||||
column · OCTET STRING (SIZE (1..31)) · read-write · current The friendly name of the sensor temperature probe. Example values from LibreNMS test devices
| |||||||||||||||||
| CtemperatureEnable | 1.3.6.1.4.1.534.6.8.1.2.2.1.2 | EnableType | RW | 1 | |||||||||||||
column · EnableType · read-write · current Configure the temperature acquired or not. 0:disabled, 1:enabled Example values from LibreNMS test devices
| |||||||||||||||||
| CtemperatureOffset | 1.3.6.1.4.1.534.6.8.1.2.2.1.3 | Integer32 | RW | 0 | |||||||||||||
column · Integer32 · read-write · current Configure the offset (Minus or Plus) to be added to the acquired value in order to correct the probe measurement error. See temperatureUnit data for the units. Example values from LibreNMS test devices
| |||||||||||||||||
| CtemperatureAlarmEnable | 1.3.6.1.4.1.534.6.8.1.2.2.1.4 | EnableType | RW | 0 | |||||||||||||
column · EnableType · read-write · current Configure the temperature alarm depending on the thresholds evaluated or not. 0:disabled, 1:enabled Example values from LibreNMS test devices
| |||||||||||||||||
| CtemperatureThresholdLowWarning | 1.3.6.1.4.1.534.6.8.1.2.2.1.5 | Integer32 | RW | 100 | |||||||||||||
column · Integer32 · read-write · current Low warning temperature threshold. See temperatureUnit data for the units. Example values from LibreNMS test devices
| |||||||||||||||||
| CtemperatureThresholdLowCritical | 1.3.6.1.4.1.534.6.8.1.2.2.1.6 | Integer32 | RW | 0 | |||||||||||||
column · Integer32 · read-write · current Low critical temperature threshold. See temperatureUnit data for the units. Example values from LibreNMS test devices
| |||||||||||||||||
| CtemperatureThresholdHighWarning | 1.3.6.1.4.1.534.6.8.1.2.2.1.7 | Integer32 | RW | 700 | |||||||||||||
column · Integer32 · read-write · current High warning temperature threshold. See temperatureUnit data for the units. Example values from LibreNMS test devices
| |||||||||||||||||
| CtemperatureThresholdHighCritical | 1.3.6.1.4.1.534.6.8.1.2.2.1.8 | Integer32 | RW | 800 | |||||||||||||
column · Integer32 · read-write · current High critical temperature threshold. See temperatureUnit data for the units. Example values from LibreNMS test devices
| |||||||||||||||||
| CtemperatureThresholdHysteresis | 1.3.6.1.4.1.534.6.8.1.2.2.1.9 | Integer32 | RW | 10 | |||||||||||||
column · Integer32 · read-write · current Temperature threshold hysteresis. See temperatureUnit data for the units. Example values from LibreNMS test devices
| |||||||||||||||||
| CtemperatureAlarmGracePeriod | 1.3.6.1.4.1.534.6.8.1.2.2.1.10 | Integer32 (1..60) | RW | ||||||||||||||
column · Integer32 (1..60) · read-write · current The grace period the alarm triggers after the acquired value crosses a trigger value (in seconds). | |||||||||||||||||
| TtemperatureMonitoringTable | 1.3.6.1.4.1.534.6.8.1.2.3 | NA | |||||||||||||||
table · not-accessible · current A list of temperature probe monitoring. The number of entries is given by sensorTemperatureCount. | |||||||||||||||||
| RtemperatureMonitoringEntry | 1.3.6.1.4.1.534.6.8.1.2.3.1 | NA | |||||||||||||||
row · not-accessible · current An entry for a temperature probe monitoring.
| |||||||||||||||||
| CtemperatureAlarm | 1.3.6.1.4.1.534.6.8.1.2.3.1.1 | AlarmType | RO | 0 | |||||||||||||
column · AlarmType · read-only · current Alarm set according to the realtime measure compared to the thresholds. Example values from LibreNMS test devices
| |||||||||||||||||
| CtemperatureAlarmChangeSince | 1.3.6.1.4.1.534.6.8.1.2.3.1.2 | UnixTimeStamp | RO | 0 | |||||||||||||
column · UnixTimeStamp · read-only · current UTC time in seconds since 1970/01/01 dating the temperature alarm last change. Example values from LibreNMS test devices
| |||||||||||||||||
| CtemperatureValue | 1.3.6.1.4.1.534.6.8.1.2.3.1.3 | Integer32 | RO | 267 | |||||||||||||
column · Integer32 · read-only · current Realtime measured value after correction with the offset. See temperatureUnit data for the units. Example values from LibreNMS test devices
| |||||||||||||||||
| CtemperatureCommunicationStatus | 1.3.6.1.4.1.534.6.8.1.2.3.1.4 | CommunicationStatus | RO | ||||||||||||||
column · CommunicationStatus · read-only · current Indicates how the temperature probe is communicating or not. | |||||||||||||||||
| CtemperatureCommunicationStatusSince | 1.3.6.1.4.1.534.6.8.1.2.3.1.5 | UnixTimeStamp | RO | ||||||||||||||
column · UnixTimeStamp · read-only · current UTC time in seconds since 1970/01/01 dating the temperature communication status last change. | |||||||||||||||||
| TtemperatureMonitoringMinMaxTable | 1.3.6.1.4.1.534.6.8.1.2.4 | NA | |||||||||||||||
table · not-accessible · current A list of temperature probe monitoring Min and Max. The number of entries is given by sensorTemperatureCount. | |||||||||||||||||
| RtemperatureMonitoringMinMaxEntry | 1.3.6.1.4.1.534.6.8.1.2.4.1 | NA | |||||||||||||||
row · not-accessible · current An entry for a temperature probe monitoring Min and Max.
| |||||||||||||||||
| CtemperatureMinValue | 1.3.6.1.4.1.534.6.8.1.2.4.1.1 | Integer32 | RO | 266 | |||||||||||||
column · Integer32 · read-only · current Minimum value registered since the 1st connection of the sensor or the last reset. See temperatureUnit data for the units. Example values from LibreNMS test devices
| |||||||||||||||||
| CtemperatureMinValueSince | 1.3.6.1.4.1.534.6.8.1.2.4.1.2 | UnixTimeStamp | RO | 1625045675 | |||||||||||||
column · UnixTimeStamp · read-only · current UTC time in seconds since 1970/01/01 dating the temperature min value last change. Example values from LibreNMS test devices
| |||||||||||||||||
| CtemperatureMaxValue | 1.3.6.1.4.1.534.6.8.1.2.4.1.3 | Integer32 | RO | 267 | |||||||||||||
column · Integer32 · read-only · current Maximum value registered since the 1st connection of the sensor or the last reset. See temperatureUnit data for the units. Example values from LibreNMS test devices
| |||||||||||||||||
| CtemperatureMaxValueSince | 1.3.6.1.4.1.534.6.8.1.2.4.1.4 | UnixTimeStamp | RO | 1625045738 | |||||||||||||
column · UnixTimeStamp · read-only · current UTC time in seconds since 1970/01/01 dating the temperature max value last change. Example values from LibreNMS test devices
| |||||||||||||||||
| CtemperatureResetMinMax | 1.3.6.1.4.1.534.6.8.1.2.4.1.5 | ResetCommandType | RW | 0 | |||||||||||||
column · ResetCommandType · read-write · current Command that resets the min and max data with the current measure. 0:None, 1:Reset Example values from LibreNMS test devices
| |||||||||||||||||
| StemperatureUnit | 1.3.6.1.4.1.534.6.8.1.2.5 | TemperatureUnitType | RW | 1 | |||||||||||||
scalar · TemperatureUnitType · read-write · current Temperature unit configuration. It is a global setting for all the v1 and v3 SNMP client. It does not involve the temperature unit of data stored and managed in the card. But it does configure the unit the temperatures data are red and written in this Mib. The possible values are tenthOfDegCelsius(0), tenthOfDegFarhenheit(1), tenthOfDegKelvin(2). Example values from LibreNMS test devices
| |||||||||||||||||
| Nhumidity | 1.3.6.1.4.1.534.6.8.1.3 | ||||||||||||||||
| NhumidityNotification | 1.3.6.1.4.1.534.6.8.1.3.0 | ||||||||||||||||
| !notifyHumidityAlarm | 1.3.6.1.4.1.534.6.8.1.3.0.1 | ||||||||||||||||
notification · current Sent whenever the humidity alarm changes. | |||||||||||||||||
| !notifyHumidityCommunicationStatus | 1.3.6.1.4.1.534.6.8.1.3.0.2 | ||||||||||||||||
notification · current Sent whenever the humidity communication status changes. Is not implemented when the probe is internal (see humidityConnectionType). | |||||||||||||||||
| ThumidityIdentificationTable | 1.3.6.1.4.1.534.6.8.1.3.1 | NA | |||||||||||||||
table · not-accessible · current A list of humidity probe measurements. the number of entries is given by the humidity count. | |||||||||||||||||
| RhumidityIdentificationEntry | 1.3.6.1.4.1.534.6.8.1.3.1.1 | NA | |||||||||||||||
row · not-accessible · current An entry for a humidity probe identification.
| |||||||||||||||||
| ChumidityIndex | 1.3.6.1.4.1.534.6.8.1.3.1.1.1 | Integer32 (1..2) | AN | 1 | |||||||||||||
column · Integer32 (1..2) · accessible-for-notify · current A unique value for each humidity probe measurement. Its value ranges from 1 to sensorhumidityCount. Example values from LibreNMS test devices
| |||||||||||||||||
| ChumidityUuid | 1.3.6.1.4.1.534.6.8.1.3.1.1.2 | OCTET STRING | RO | 10f15768-8ab8-5f0e-af5a-504ac025800e | |||||||||||||
column · OCTET STRING · read-only · current A unique uuid value for each humidity. Example values from LibreNMS test devices
| |||||||||||||||||
| ChumidityConnectionType | 1.3.6.1.4.1.534.6.8.1.3.1.1.3 | ProbeConnectionType | RO | 1 | |||||||||||||
column · ProbeConnectionType · read-only · current Probe connection type with the sensor that monitors it. Example values from LibreNMS test devices
| |||||||||||||||||
| ThumidityConfigurationTable | 1.3.6.1.4.1.534.6.8.1.3.2 | NA | |||||||||||||||
table · not-accessible · current A list of humidity probe configuration. The number of entries is given by sensorhumidityCount. | |||||||||||||||||
| RhumidityConfigurationEntry | 1.3.6.1.4.1.534.6.8.1.3.2.1 | NA | |||||||||||||||
row · not-accessible · current An entry for a humidity probe configuration.
| |||||||||||||||||
| ChumidityName | 1.3.6.1.4.1.534.6.8.1.3.2.1.1 | OCTET STRING (SIZE (1..31)) | RW | EMPDT1H1C2 @1-H1 | |||||||||||||
column · OCTET STRING (SIZE (1..31)) · read-write · current The friendly name of the sensor humidity probe. Example values from LibreNMS test devices
| |||||||||||||||||
| ChumidityEnable | 1.3.6.1.4.1.534.6.8.1.3.2.1.2 | EnableType | RW | 1 | |||||||||||||
column · EnableType · read-write · current Configure the humidity acquired or not. 0:disabled, 1:enabled Example values from LibreNMS test devices
| |||||||||||||||||
| ChumidityOffset | 1.3.6.1.4.1.534.6.8.1.3.2.1.3 | Integer32 | RW | 0 | |||||||||||||
column · Integer32 · read-write · current Configure the offset (Minus or Plus) to be added to the acquired value in order to correct the probe measurement error. in tenth of % units. Example values from LibreNMS test devices
| |||||||||||||||||
| ChumidityAlarmEnable | 1.3.6.1.4.1.534.6.8.1.3.2.1.4 | EnableType | RW | 0 | |||||||||||||
column · EnableType · read-write · current Configure the humidity alarm depending on the thresholds evaluated or not. 0:disabled, 1:enabled Example values from LibreNMS test devices
| |||||||||||||||||
| ChumidityThresholdLowWarning | 1.3.6.1.4.1.534.6.8.1.3.2.1.5 | Integer32 | RW | 200 | |||||||||||||
column · Integer32 · read-write · current Low warning humidity threshold in tenth of % units. Example values from LibreNMS test devices
| |||||||||||||||||
| ChumidityThresholdLowCritical | 1.3.6.1.4.1.534.6.8.1.3.2.1.6 | Integer32 | RW | 100 | |||||||||||||
column · Integer32 · read-write · current Low critical humidity threshold in tenth of % units. Example values from LibreNMS test devices
| |||||||||||||||||
| ChumidityThresholdHighWarning | 1.3.6.1.4.1.534.6.8.1.3.2.1.7 | Integer32 | RW | 800 | |||||||||||||
column · Integer32 · read-write · current High warning humidity threshold in tenth of % units. Example values from LibreNMS test devices
| |||||||||||||||||
| ChumidityThresholdHighCritical | 1.3.6.1.4.1.534.6.8.1.3.2.1.8 | Integer32 | RW | 900 | |||||||||||||
column · Integer32 · read-write · current High critical humidity threshold in tenth of % units. Example values from LibreNMS test devices
| |||||||||||||||||
| ChumidityThresholdHysteresis | 1.3.6.1.4.1.534.6.8.1.3.2.1.9 | Integer32 | RW | 10 | |||||||||||||
column · Integer32 · read-write · current humidity threshold hysteresis in tenth of % units. Example values from LibreNMS test devices
| |||||||||||||||||
| ChumidityAlarmGracePeriod | 1.3.6.1.4.1.534.6.8.1.3.2.1.10 | Integer32 (1..60) | RW | ||||||||||||||
column · Integer32 (1..60) · read-write · current The grace period the alarm triggers after the acquired value crosses a trigger value (in seconds). | |||||||||||||||||
| ThumidityMonitoringTable | 1.3.6.1.4.1.534.6.8.1.3.3 | NA | |||||||||||||||
table · not-accessible · current A list of humidity probe monitoring. The number of entries is given by sensorhumidityCount. | |||||||||||||||||
| RhumidityMonitoringEntry | 1.3.6.1.4.1.534.6.8.1.3.3.1 | NA | |||||||||||||||
row · not-accessible · current An entry for a humidity probe monitoring.
| |||||||||||||||||
| ChumidityAlarm | 1.3.6.1.4.1.534.6.8.1.3.3.1.1 | AlarmType | RO | 0 | |||||||||||||
column · AlarmType · read-only · current Alarm set according to the realtime measure compared to the thresholds. Example values from LibreNMS test devices
| |||||||||||||||||
| ChumidityAlarmChangeSince | 1.3.6.1.4.1.534.6.8.1.3.3.1.2 | UnixTimeStamp | RO | 0 | |||||||||||||
column · UnixTimeStamp · read-only · current UTC time in seconds since 1970/01/01 dating the humidity alarm last change. Example values from LibreNMS test devices
| |||||||||||||||||
| ChumidityValue | 1.3.6.1.4.1.534.6.8.1.3.3.1.3 | Integer32 | RO | 240 | |||||||||||||
column · Integer32 · read-only · current Realtime measured value after correction with the offset. in tenth of % units. Example values from LibreNMS test devices
| |||||||||||||||||
| ChumidityCommunicationStatus | 1.3.6.1.4.1.534.6.8.1.3.3.1.4 | CommunicationStatus | RO | ||||||||||||||
column · CommunicationStatus · read-only · current Indicates how the humidity probe is communicating or not. | |||||||||||||||||
| ChumidityCommunicationStatusSince | 1.3.6.1.4.1.534.6.8.1.3.3.1.5 | UnixTimeStamp | RO | ||||||||||||||
column · UnixTimeStamp · read-only · current UTC time in seconds since 1970/01/01 dating the humidity communication status last change. | |||||||||||||||||
| ThumidityMonitoringMinMaxTable | 1.3.6.1.4.1.534.6.8.1.3.4 | NA | |||||||||||||||
table · not-accessible · current A list of humidity probe monitoring Min and Max. The number of entries is given by sensorhumidityCount. | |||||||||||||||||
| RhumidityMonitoringMinMaxEntry | 1.3.6.1.4.1.534.6.8.1.3.4.1 | NA | |||||||||||||||
row · not-accessible · current An entry for a humidity probe monitoring Min and Max.
| |||||||||||||||||
| ChumidityMinValue | 1.3.6.1.4.1.534.6.8.1.3.4.1.1 | Integer32 | RO | 224 | |||||||||||||
column · Integer32 · read-only · current Minimum value registered since the 1st connection of the sensor or the last reset. in tenth of % units. Example values from LibreNMS test devices
| |||||||||||||||||
| ChumidityMinValueSince | 1.3.6.1.4.1.534.6.8.1.3.4.1.2 | UnixTimeStamp | RO | 1625046221 | |||||||||||||
column · UnixTimeStamp · read-only · current UTC time in seconds since 1970/01/01 dating the humidity min value last change. Example values from LibreNMS test devices
| |||||||||||||||||
| ChumidityMaxValue | 1.3.6.1.4.1.534.6.8.1.3.4.1.3 | Integer32 | RO | 241 | |||||||||||||
column · Integer32 · read-only · current Maximum value registered since the 1st connection of the sensor or the last reset. in tenth of % units. Example values from LibreNMS test devices
| |||||||||||||||||
| ChumidityMaxValueSince | 1.3.6.1.4.1.534.6.8.1.3.4.1.4 | UnixTimeStamp | RO | 1625049197 | |||||||||||||
column · UnixTimeStamp · read-only · current UTC time in seconds since 1970/01/01 dating the humidity max value last change. Example values from LibreNMS test devices
| |||||||||||||||||
| ChumidityResetMinMax | 1.3.6.1.4.1.534.6.8.1.3.4.1.5 | ResetCommandType | RW | 0 | |||||||||||||
column · ResetCommandType · read-write · current Command that resets the min and max data with the current measure. 0:None, 1:Reset Example values from LibreNMS test devices
| |||||||||||||||||
| NdigitalInput | 1.3.6.1.4.1.534.6.8.1.4 | ||||||||||||||||
| NdigitalInputNotification | 1.3.6.1.4.1.534.6.8.1.4.0 | ||||||||||||||||
| !notifyDigitalInputAlarm | 1.3.6.1.4.1.534.6.8.1.4.0.1 | ||||||||||||||||
notification · current Sent whenever the digital input alarm changes. | |||||||||||||||||
| !notifydigitalInputCommunicationStatus | 1.3.6.1.4.1.534.6.8.1.4.0.2 | ||||||||||||||||
notification · current Sent whenever the digital input communication status changes. Is not implemented when the probe is internal (see digitalInputConnectionType). | |||||||||||||||||
| TdigitalInputIdentificationTable | 1.3.6.1.4.1.534.6.8.1.4.1 | NA | |||||||||||||||
table · not-accessible · current A list of digital input probe measurements. The number of entries is given by sensorDigitalInputCount. | |||||||||||||||||
| RdigitalInputIdentificationEntry | 1.3.6.1.4.1.534.6.8.1.4.1.1 | NA | |||||||||||||||
row · not-accessible · current An entry for a digital input identification.
| |||||||||||||||||
| CdigitalInputIndex | 1.3.6.1.4.1.534.6.8.1.4.1.1.1 | Integer32 (1..2) | AN | 1 | |||||||||||||
column · Integer32 (1..2) · accessible-for-notify · current A unique value for each digital input probe measurement. Its value ranges from 1 to sensorDigitalInputCount. Example values from LibreNMS test devices
| |||||||||||||||||
| CdigitalInputUuid | 1.3.6.1.4.1.534.6.8.1.4.1.1.2 | OCTET STRING | RO | 902984c7-83bd-5dfe-b437-a0fbcf385464 | |||||||||||||
column · OCTET STRING · read-only · current A unique uuid value for each digital Input. Example values from LibreNMS test devices
| |||||||||||||||||
| CdigitalInputConnectionType | 1.3.6.1.4.1.534.6.8.1.4.1.1.3 | ProbeConnectionType | RO | 1 | |||||||||||||
column · ProbeConnectionType · read-only · current Probe connection type with the sensor that monitors it. Example values from LibreNMS test devices
| |||||||||||||||||
| TdigitalInputConfigurationTable | 1.3.6.1.4.1.534.6.8.1.4.2 | NA | |||||||||||||||
table · not-accessible · current A list of digital input probe configuration. The number of entries is given by sensorDigitalInputCount. | |||||||||||||||||
| RdigitalInputConfigurationEntry | 1.3.6.1.4.1.534.6.8.1.4.2.1 | NA | |||||||||||||||
row · not-accessible · current An entry for a digital input probe configuration.
| |||||||||||||||||
| CdigitalInputName | 1.3.6.1.4.1.534.6.8.1.4.2.1.1 | OCTET STRING (SIZE (1..31)) | RW | EMPDT1H1C2 @1-C1 | |||||||||||||
column · OCTET STRING (SIZE (1..31)) · read-write · current The friendly name of the digital input probe. Example values from LibreNMS test devices
| |||||||||||||||||
| CdigitalInputEnable | 1.3.6.1.4.1.534.6.8.1.4.2.1.2 | EnableType | RW | 1 | |||||||||||||
column · EnableType · read-write · current Configure the digital input acquired or not. 0:disabled, 1:enabled Example values from LibreNMS test devices
| |||||||||||||||||
| CdigitalInputPolarity | 1.3.6.1.4.1.534.6.8.1.4.2.1.3 | PolarityType | RW | 0 | |||||||||||||
column · PolarityType · read-write · current Configure the digitalInput polarity. 0 : Normally opened, 1 : Normally closed Example values from LibreNMS test devices
| |||||||||||||||||
| CdigitalInputAlarmEnable | 1.3.6.1.4.1.534.6.8.1.4.2.1.4 | EnableType | RW | 0 | |||||||||||||
column · EnableType · read-write · current Configure the digitalInput alarm depending on the polarity evaluated or not. 0:disabled, 1:enabled Example values from LibreNMS test devices
| |||||||||||||||||
| CdigitalInputAlarmSeverity | 1.3.6.1.4.1.534.6.8.1.4.2.1.5 | AlarmSeverityType | RW | 2 | |||||||||||||
column · AlarmSeverityType · read-write · current Configure the alarm severity. Example values from LibreNMS test devices
| |||||||||||||||||
| CdigitalInputAlarmGracePeriod | 1.3.6.1.4.1.534.6.8.1.4.2.1.6 | Integer32 (1..60) | RW | ||||||||||||||
column · Integer32 (1..60) · read-write · current The delay the alarm triggers when the state change event occurs (in seconds). | |||||||||||||||||
| TdigitalInputMonitoringTable | 1.3.6.1.4.1.534.6.8.1.4.3 | NA | |||||||||||||||
table · not-accessible · current A list of digital input probee monitoring. The number of entries is given by sensorDigitalInputCount. | |||||||||||||||||
| RdigitalInputMonitoringEntry | 1.3.6.1.4.1.534.6.8.1.4.3.1 | NA | |||||||||||||||
row · not-accessible · current An entry for a digital Input probe.
| |||||||||||||||||
| CdigitalInputAlarm | 1.3.6.1.4.1.534.6.8.1.4.3.1.1 | AlarmLevelType | RO | 0 | |||||||||||||
column · AlarmLevelType · read-only · current Alarm set according to the polarity and alarm severity configuration. Example values from LibreNMS test devices
| |||||||||||||||||
| CdigitalInputAlarmChangeSince | 1.3.6.1.4.1.534.6.8.1.4.3.1.2 | UnixTimeStamp | RO | 0 | |||||||||||||
column · UnixTimeStamp · read-only · current UTC time in seconds since 1970/01/01 dating the digital input alarm last change. Example values from LibreNMS test devices
| |||||||||||||||||
| CdigitalInputState | 1.3.6.1.4.1.534.6.8.1.4.3.1.3 | StateType | RO | 0 | |||||||||||||
column · StateType · read-only · current Measure of the digital input after applying the polarity configured. 0 : Inactive, 1 : Active Example values from LibreNMS test devices
| |||||||||||||||||
| CdigitalInputStateSince | 1.3.6.1.4.1.534.6.8.1.4.3.1.4 | UnixTimeStamp | RO | 1625045674 | |||||||||||||
column · UnixTimeStamp · read-only · current UTC time in seconds since 1970/01/01 dating the digital input state last change. Example values from LibreNMS test devices
| |||||||||||||||||
| CdigitalInputCommunicationStatus | 1.3.6.1.4.1.534.6.8.1.4.3.1.5 | CommunicationStatus | RO | ||||||||||||||
column · CommunicationStatus · read-only · current Indicates how the digital input is communicating or not. | |||||||||||||||||
| CdigitalInputCommunicationStatusSince | 1.3.6.1.4.1.534.6.8.1.4.3.1.6 | UnixTimeStamp | RO | ||||||||||||||
column · UnixTimeStamp · read-only · current UTC time in seconds since 1970/01/01 dating the digital input communication status last change. | |||||||||||||||||
| Nconformance | 1.3.6.1.4.1.534.6.8.1.10 | ||||||||||||||||
| MeatonSensorCompliances | 1.3.6.1.4.1.534.6.8.1.10.1 | ||||||||||||||||
compliance · current The requirements for conforming to the Sensor MIB. | |||||||||||||||||
| NobjectGroups | 1.3.6.1.4.1.534.6.8.1.10.2 | ||||||||||||||||
| GsensorRequiredGroup | 1.3.6.1.4.1.534.6.8.1.10.2.1 | ||||||||||||||||
group · current These objects are required to conform to this MIB.
| |||||||||||||||||
| GsensorOptionalGroup | 1.3.6.1.4.1.534.6.8.1.10.2.2 | ||||||||||||||||
group · current These objects in this MIB are optional.
| |||||||||||||||||
| GsensorNotifyGroup | 1.3.6.1.4.1.534.6.8.1.10.2.3 | ||||||||||||||||
group · current These notifications will be supported depending on the features of the sensor. | |||||||||||||||||
Textual conventions
AlarmLevelTypeINTEGERcritical(3)good(0)informational(1)warning(2)Describes the alarm level.
AlarmSeverityTypeINTEGERcritical(3)informational(1)warning(2)Describes the alarm severity.
AlarmTypeINTEGERgood(0)highCritical(4)highWarning(3)lowCritical(2)lowWarning(1)Describes the alarm according to a measured value by reference to the triggers.
CommunicationStatusINTEGERcommunicationLost(3)communicationOK(2)unknown(0)Describes the communication sensor status or probe status.
ElevationTypeINTEGERbottom(2)middle(3)other(1)top(4)undefined(0)Describes the elevation in the rack.
EnableTypeINTEGERdisabled(0)enabled(1)Describes enable/disable.
PolarityTypeINTEGERnormallyClosed(1)normallyOpened(0)Describes the polarity configuration.
PositionTypeINTEGERbatteryRoom(4)other(1)rackFront(3)rackRear(2)undefined(0)Describes the position by reference to the data center aisle.
ProbeConnectionTypeINTEGERinternal(1)undefined(0)wired(2)wireless(3)Describes the probe connection to the sensor or probe.
ResetCommandTypeINTEGERnone(0)reset(1)Commands a reset.
StateTypeINTEGERactive(1)inactive(0)Describes the state of a digital input that depends on its measure and the polrity configuration.
TemperatureUnitTypeINTEGERtenthOfDegCelsius(1)tenthOfDegFarhenheit(2)tenthOfDegKelvin(0)Describes the temperature unit used to read/write the temperature data.
UnixTimeStampCounter32Display hint:
ddddddddddUnix time stamp. Measured in seconds since January 1, 1970.
Traps / Notifications
- notifyDigitalInputAlarm
1.3.6.1.4.1.534.6.8.1.4.0.1 - notifyHumidityAlarm
1.3.6.1.4.1.534.6.8.1.3.0.1 - notifyHumidityCommunicationStatus
1.3.6.1.4.1.534.6.8.1.3.0.2 - notifySensorCount
1.3.6.1.4.1.534.6.8.1.1.0.1 - notifySensorStatus
1.3.6.1.4.1.534.6.8.1.1.0.2 - notifyTemperatureAlarm
1.3.6.1.4.1.534.6.8.1.2.0.1 - notifyTemperatureCommunicationStatus
1.3.6.1.4.1.534.6.8.1.2.0.2 - notifydigitalInputCommunicationStatus
1.3.6.1.4.1.534.6.8.1.4.0.2