EATON-EMP-MIB
Eaton CorporationThe MIB module for Eaton Environment Monitoring Probes (EMP). The elements of this MIB have been extracted from the Eaton PowerMIB and placed in this separate MIB file for convenience. Copyright (C) Eaton Corporation (2007).
snmptranslate -m EATON-EMP-MIB -Tpsnmpwalk -v2c -c <community> -m EATON-EMP-MIB <host> 1.3.6.1.4.1.534.1.6.0Imports
| EATON-OIDS | xupsEnvironment |
|---|---|
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | Bits, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso |
| SNMPv2-TC | DisplayString, PhysAddress, TEXTUAL-CONVENTION |
OID tree
| Name | OID | Type | Access | Status | Example | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| IeatonEMPMIB | 1.3.6.1.4.1.534.1.6.0 | ||||||||||||||||||||
identity The MIB module for Eaton Environment Monitoring Probes (EMP). The elements of this MIB have been extracted from the Eaton PowerMIB and placed in this separate MIB file for convenience. Copyright (C) Eaton Corporation (2007). | |||||||||||||||||||||
| NeatonEMPConformance | 1.3.6.1.4.1.534.1.6.0.2 | ||||||||||||||||||||
| GeatonEMPGroup | 1.3.6.1.4.1.534.1.6.0.2.1 | ||||||||||||||||||||
group · current The EMP scalar objects. | |||||||||||||||||||||
| GeatonEMPTableGroup | 1.3.6.1.4.1.534.1.6.0.2.2 | ||||||||||||||||||||
group · current The EMP Contacts Table objects. | |||||||||||||||||||||
| MeatonEMPSimpleCompliance | 1.3.6.1.4.1.534.1.6.0.2.4 | ||||||||||||||||||||
compliance · current The compliance statement for a normal EMP.
| |||||||||||||||||||||
| SxupsEnvRemoteTemp | 1.3.6.1.4.1.534.1.6.5 | Integer32 (-100..200) | RO | 33 | |||||||||||||||||
scalar · Integer32 (-100..200) · read-only · current The reading of an EMP's temperature sensor.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| SxupsEnvRemoteHumidity | 1.3.6.1.4.1.534.1.6.6 | Integer32 (0..100) | RO | 15 | |||||||||||||||||
scalar · Integer32 (0..100) · read-only · current The reading of an EMP's humidity sensor.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| SxupsEnvNumContacts | 1.3.6.1.4.1.534.1.6.7 | Integer32 (1..1024) | RO | 2 | |||||||||||||||||
scalar · Integer32 (1..1024) · read-only · current The number of Contacts in the xupsContactSenseTable. This object indicates the number of rows in the xupsContactSenseTable. Example values from LibreNMS test devices
| |||||||||||||||||||||
| TxupsContactSenseTable | 1.3.6.1.4.1.534.1.6.8 | NA | |||||||||||||||||||
table · not-accessible · current A list of Contact Sensing table entries. The number of entries is given by the value of xupsEnvNumContacts. | |||||||||||||||||||||
| RxupsContactsTableEntry | 1.3.6.1.4.1.534.1.6.8.1 | NA | |||||||||||||||||||
row · not-accessible · current An entry containing information applicable to a particular Contact input.
| |||||||||||||||||||||
| CxupsContactIndex | 1.3.6.1.4.1.534.1.6.8.1.1 | Integer32 (1..1024) | RO | 1 | |||||||||||||||||
column · Integer32 (1..1024) · read-only · current The Contact identifier; identical to the Contact Number. This object is not-accessible to MIB browsers, but had to be changed to read-only to satisfy SMIv2 syntax checkers if it is included in traps. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CxupsContactType | 1.3.6.1.4.1.534.1.6.8.1.2 | INTEGER | RW | notUsed(4) | |||||||||||||||||
column · INTEGER · read-write · current The normal state for this contact. The 'other' (not 'Normally') state is the Active state for generating the xupstdContactActiveNotice trap. If anyChange(3) is selected, then this trap is sent any time the contact changes to either Open or Closed. No traps are sent if the Contact is set to notUsed(4). In many cases, the configuration for Contacts may be done by other means, so this object may be read-only.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CxupsContactState | 1.3.6.1.4.1.534.1.6.8.1.3 | INTEGER | RO | open(1) | |||||||||||||||||
column · INTEGER · read-only · current The current state of the Contact input; the value is based on the open/closed input state and the setting for xupsContactType. When entering the openWithNotice(3) and closedWithNotice(4) states, no entries added to the xupsAlarmTable, but the xupstdContactActiveNotice trap is sent.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CxupsContactDescr | 1.3.6.1.4.1.534.1.6.8.1.4 | DisplayString (SIZE (0..63)) | RW | Input #1 | |||||||||||||||||
column · DisplayString (SIZE (0..63)) · read-write · current A label identifying the Contact. This object should be set by the administrator. Example values from LibreNMS test devices
| |||||||||||||||||||||
| SxupsEnvRemoteTempLowerLimit | 1.3.6.1.4.1.534.1.6.9 | Integer32 (-100..200) | RW | 5 | |||||||||||||||||
scalar · Integer32 (-100..200) · read-write · current The Lower Limit of the EMP temperature; if xupsEnvRemoteTemp falls below this value, the xupsRemoteTempBad alarm will occur.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| SxupsEnvRemoteTempUpperLimit | 1.3.6.1.4.1.534.1.6.10 | Integer32 (-100..200) | RW | 33 | |||||||||||||||||
scalar · Integer32 (-100..200) · read-write · current The Upper Limit of the EMP temperature; if xupsEnvRemoteTemp rises above this value, the xupsRemoteTempBad alarm will occur. This value should be greater than xupsEnvRemoteTempLowerLimit.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| SxupsEnvRemoteHumidityLowerLimit | 1.3.6.1.4.1.534.1.6.11 | Integer32 (0..100) | RW | 5 | |||||||||||||||||
scalar · Integer32 (0..100) · read-write · current The Lower Limit of the EMP humidity reading; if xupsEnvRemoteHumidity falls below this value, the xupsRemoteHumidityBad alarm will occur.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| SxupsEnvRemoteHumidityUpperLimit | 1.3.6.1.4.1.534.1.6.12 | Integer32 (0..100) | RW | 90 | |||||||||||||||||
scalar · Integer32 (0..100) · read-write · current The Upper Limit of the EMP humidity reading; if xupsEnvRemoteHumidity rises above this value, the xupsRemoteHumidityBad alarm will occur. This value should be greater than xupsEnvRemoteHumidityLowerLimit.
Example values from LibreNMS test devices
| |||||||||||||||||||||