EATON-ATS2-MIB
Eaton CorporationThe MIB module for Eaton ATS (Automatic Transfer Switch).
snmptranslate -m EATON-ATS2-MIB -Tpsnmpwalk -v2c -c <community> -m EATON-ATS2-MIB <host> 1.3.6.1.4.1.534.10.2Imports
| EATON-OIDS | sts |
|---|---|
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
| SNMPv2-SMI | Bits, Counter32, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso |
| SNMPv2-TC | DisplayString, PhysAddress, TEXTUAL-CONVENTION |
OID tree
| Name | OID | Type | Access | Status | Example | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Iats2 | 1.3.6.1.4.1.534.10.2 | ||||||||||||||||
identity The MIB module for Eaton ATS (Automatic Transfer Switch). | |||||||||||||||||
| Nats2Ident | 1.3.6.1.4.1.534.10.2.1 | ||||||||||||||||
| Sats2IdentManufacturer | 1.3.6.1.4.1.534.10.2.1.1 | DisplayString (SIZE (0..16)) | RO | EATON | |||||||||||||
scalar · DisplayString (SIZE (0..16)) · read-only · current The manufacturer name. Example values from LibreNMS test devices
| |||||||||||||||||
| Sats2IdentModel | 1.3.6.1.4.1.534.10.2.1.2 | DisplayString (SIZE (0..32)) | RO | Eaton 9PX 1000i RT 2U | |||||||||||||
scalar · DisplayString (SIZE (0..32)) · read-only · current Device model name. Example values from LibreNMS test devices
| |||||||||||||||||
| Sats2IdentFWVersion | 1.3.6.1.4.1.534.10.2.1.3 | DisplayString (SIZE (0..16)) | RO | 01.20.5072 | |||||||||||||
scalar · DisplayString (SIZE (0..16)) · read-only · current Device F/W version. Example values from LibreNMS test devices
| |||||||||||||||||
| Sats2IdentRelease | 1.3.6.1.4.1.534.10.2.1.4 | DisplayString (SIZE (0..16)) | RO | 10/23/2020 | |||||||||||||
scalar · DisplayString (SIZE (0..16)) · read-only · current The released date. Example values from LibreNMS test devices
| |||||||||||||||||
| Sats2IdentSerialNumber | 1.3.6.1.4.1.534.10.2.1.5 | DisplayString (SIZE (0..20)) | RO | GA10K33096 | |||||||||||||
scalar · DisplayString (SIZE (0..20)) · read-only · current Device serial number Example values from LibreNMS test devices
| |||||||||||||||||
| Sats2IdentPartNumber | 1.3.6.1.4.1.534.10.2.1.6 | DisplayString (SIZE (0..20)) | RO | 9PX1000iRT2U | |||||||||||||
scalar · DisplayString (SIZE (0..20)) · read-only · current Device part number Example values from LibreNMS test devices
| |||||||||||||||||
| Sats2IdentAgentVersion | 1.3.6.1.4.1.534.10.2.1.7 | DisplayString (SIZE (0..20)) | RO | 2.0.5 | |||||||||||||
scalar · DisplayString (SIZE (0..20)) · read-only · current Communication Card F/W version Example values from LibreNMS test devices
| |||||||||||||||||
| Nats2Measure | 1.3.6.1.4.1.534.10.2.2 | ||||||||||||||||
| Nats2Input | 1.3.6.1.4.1.534.10.2.2.1 | ||||||||||||||||
| Sats2InputDephasing | 1.3.6.1.4.1.534.10.2.2.1.1 | INTEGER | RO | ||||||||||||||
scalar · INTEGER · read-only · current The dephasing in between Source 1 and Source 2.
| |||||||||||||||||
| Tats2InputTable | 1.3.6.1.4.1.534.10.2.2.2 | NA | |||||||||||||||
table · not-accessible · current The table of input information. | |||||||||||||||||
| Rats2InputEntry | 1.3.6.1.4.1.534.10.2.2.2.1 | NA | |||||||||||||||
row · not-accessible · current The input information of each source input: <node>.1 source1 <node>.2 source2
| |||||||||||||||||
| Cats2InputIndex | 1.3.6.1.4.1.534.10.2.2.2.1.1 | INTEGER | RO | source1(1) | |||||||||||||
column · INTEGER · read-only · current Index to input.
Example values from LibreNMS test devices
| |||||||||||||||||
| Cats2InputVoltage | 1.3.6.1.4.1.534.10.2.2.2.1.2 | INTEGER | RO | 2379 | |||||||||||||
column · INTEGER · read-only · current The input voltage in front of relay. Units are 0.1 V.
Example values from LibreNMS test devices
| |||||||||||||||||
| Cats2InputFrequency | 1.3.6.1.4.1.534.10.2.2.2.1.3 | INTEGER | RO | 500 | |||||||||||||
column · INTEGER · read-only · current The input frequency. Units are 0.1 Hz.
Example values from LibreNMS test devices
| |||||||||||||||||
| Nats2Output | 1.3.6.1.4.1.534.10.2.2.3 | ||||||||||||||||
| Sats2OutputVoltage | 1.3.6.1.4.1.534.10.2.2.3.1 | INTEGER | RO | 2296 | |||||||||||||
scalar · INTEGER · read-only · current The output voltage. Units are 0.1 V.
Example values from LibreNMS test devices
| |||||||||||||||||
| Sats2OutputCurrent | 1.3.6.1.4.1.534.10.2.2.3.2 | INTEGER | RO | 4 | |||||||||||||
scalar · INTEGER · read-only · current The output current. Units are 0.1 A.
Example values from LibreNMS test devices
| |||||||||||||||||
| Sats2OperationMode | 1.3.6.1.4.1.534.10.2.2.4 | INTEGER | RO | initialization(1) | |||||||||||||
scalar · INTEGER · read-only · current The operation mode.
Example values from LibreNMS test devices
| |||||||||||||||||
| Nats2Status | 1.3.6.1.4.1.534.10.2.3 | ||||||||||||||||
| Nats2InputStatus | 1.3.6.1.4.1.534.10.2.3.1 | ||||||||||||||||
| Sats2InputStatusDephasing | 1.3.6.1.4.1.534.10.2.3.1.1 | INTEGER | RO | ||||||||||||||
scalar · INTEGER · read-only · current The dephasing status in between Source 1 and Source 2.
| |||||||||||||||||
| Tats2InputStatusTable | 1.3.6.1.4.1.534.10.2.3.2 | NA | |||||||||||||||
table · not-accessible · current The table of input status. | |||||||||||||||||
| Rats2InputStatusEntry | 1.3.6.1.4.1.534.10.2.3.2.1 | NA | |||||||||||||||
row · not-accessible · current The input flow status: <node>.1 source1 <node>.2 source2
| |||||||||||||||||
| Cats2InputStatusIndex | 1.3.6.1.4.1.534.10.2.3.2.1.1 | INTEGER | RO | source1(1) | |||||||||||||
column · INTEGER · read-only · current Index of input entry.
Example values from LibreNMS test devices
| |||||||||||||||||
| Cats2InputStatusFrequency | 1.3.6.1.4.1.534.10.2.3.2.1.2 | INTEGER | RO | good(1) | |||||||||||||
column · INTEGER · read-only · current The status of input frequency.
Example values from LibreNMS test devices
| |||||||||||||||||
| Cats2InputStatusGood | 1.3.6.1.4.1.534.10.2.3.2.1.3 | INTEGER | RO | voltageAndFreqNormalRange(2) | |||||||||||||
column · INTEGER · read-only · current The summarized status of input AC flow.
Example values from LibreNMS test devices
| |||||||||||||||||
| Cats2InputStatusInternalFailure | 1.3.6.1.4.1.534.10.2.3.2.1.4 | INTEGER | RO | good(1) | |||||||||||||
column · INTEGER · read-only · current The internal fault status of input.
Example values from LibreNMS test devices
| |||||||||||||||||
| Cats2InputStatusVoltage | 1.3.6.1.4.1.534.10.2.3.2.1.5 | INTEGER | RO | normalRange(1) | |||||||||||||
column · INTEGER · read-only · current The status of input voltage.
Example values from LibreNMS test devices
| |||||||||||||||||
| Cats2InputStatusUsed | 1.3.6.1.4.1.534.10.2.3.2.1.6 | INTEGER | RO | poweringLoad(2) | |||||||||||||
column · INTEGER · read-only · current The status of input relay.
Example values from LibreNMS test devices
| |||||||||||||||||
| Nats2OutputStatus | 1.3.6.1.4.1.534.10.2.3.3 | ||||||||||||||||
| Sats2StatusInternalFailure | 1.3.6.1.4.1.534.10.2.3.3.1 | INTEGER | RO | ||||||||||||||
scalar · INTEGER · read-only · current Output fault.
| |||||||||||||||||
| Sats2StatusOutput | 1.3.6.1.4.1.534.10.2.3.3.2 | INTEGER | RO | outputPowered(2) | |||||||||||||
scalar · INTEGER · read-only · current Output powered status.
Example values from LibreNMS test devices
| |||||||||||||||||
| Sats2StatusOverload | 1.3.6.1.4.1.534.10.2.3.3.3 | INTEGER | RO | noOverload(1) | |||||||||||||
scalar · INTEGER · read-only · current The output overload status.
Example values from LibreNMS test devices
| |||||||||||||||||
| Sats2StatusOverTemperature | 1.3.6.1.4.1.534.10.2.3.3.4 | INTEGER | RO | noOverTemperature(1) | |||||||||||||
scalar · INTEGER · read-only · current The over temperature status.
Example values from LibreNMS test devices
| |||||||||||||||||
| Sats2StatusShortCircuit | 1.3.6.1.4.1.534.10.2.3.3.5 | INTEGER | RO | noShortCircuit(1) | |||||||||||||
scalar · INTEGER · read-only · current Short circuit status.
Example values from LibreNMS test devices
| |||||||||||||||||
| Sats2StatusCommunicationLost | 1.3.6.1.4.1.534.10.2.3.3.6 | INTEGER | RO | good(1) | |||||||||||||
scalar · INTEGER · read-only · current Communication failure status.
Example values from LibreNMS test devices
| |||||||||||||||||
| Sats2StatusConfigurationFailure | 1.3.6.1.4.1.534.10.2.3.3.7 | INTEGER | RO | good(1) | |||||||||||||
scalar · INTEGER · read-only · current Configuration failure status.
Example values from LibreNMS test devices
| |||||||||||||||||
| Nats2Config | 1.3.6.1.4.1.534.10.2.4 | ||||||||||||||||
| Nats2ConfigTime | 1.3.6.1.4.1.534.10.2.4.1 | ||||||||||||||||
| Sats2ConfigTimeRTC | 1.3.6.1.4.1.534.10.2.4.1.1 | UnixTimeStamp | RW | 1625049578 | |||||||||||||
scalar · UnixTimeStamp · read-write · current Clock value. This could be from either a real-time clock (in which case it is likely writeable) or from a time server via NTP (probably read-only). (since 1/1/1970 at 1:00:00). Example values from LibreNMS test devices
| |||||||||||||||||
| Sats2ConfigTimeTextDate | 1.3.6.1.4.1.534.10.2.4.1.2 | DisplayString (SIZE (0..10)) | RO | 06/30/2021 | |||||||||||||
scalar · DisplayString (SIZE (0..10)) · read-only · current The present date in MM/DD/YYYY text format. Example values from LibreNMS test devices
| |||||||||||||||||
| Sats2ConfigTimeTextTime | 1.3.6.1.4.1.534.10.2.4.1.3 | DisplayString (SIZE (0..8)) | RO | 10:39:38 | |||||||||||||
scalar · DisplayString (SIZE (0..8)) · read-only · current The present time in hh:mm:ss text format. Example values from LibreNMS test devices
| |||||||||||||||||
| Sats2ConfigInputVoltageRating | 1.3.6.1.4.1.534.10.2.4.2 | INTEGER | RO | 230 | |||||||||||||
scalar · INTEGER · read-only · current The input voltage rating. Unit is 1 V.
Example values from LibreNMS test devices
| |||||||||||||||||
| Sats2ConfigInputFrequencyRating | 1.3.6.1.4.1.534.10.2.4.3 | INTEGER | RO | 50 | |||||||||||||
scalar · INTEGER · read-only · current The input frequency rating. Unit is 1 Hz.
Example values from LibreNMS test devices
| |||||||||||||||||
| Sats2ConfigOutputVoltage | 1.3.6.1.4.1.534.10.2.4.4 | INTEGER | RW | ||||||||||||||
scalar · INTEGER · read-write · current The output voltage config. Unit is 1 V.
| |||||||||||||||||
| Sats2ConfigPreferred | 1.3.6.1.4.1.534.10.2.4.5 | INTEGER | RW | ||||||||||||||
scalar · INTEGER · read-write · current The preferred source.
| |||||||||||||||||
| Sats2ConfigSensitivity | 1.3.6.1.4.1.534.10.2.4.6 | INTEGER | RW | ||||||||||||||
scalar · INTEGER · read-write · current The AC Blackout Sensitivity.
| |||||||||||||||||
| Sats2ConfigTransferMode | 1.3.6.1.4.1.534.10.2.4.7 | INTEGER | RW | ||||||||||||||
scalar · INTEGER · read-write · current behavior configuration when transfering from one source to other source not synchronized.
| |||||||||||||||||
| Sats2ConfigTransferTest | 1.3.6.1.4.1.534.10.2.4.8 | INTEGER | RO | ||||||||||||||
scalar · INTEGER · read-only · current The status of transfer test.
| |||||||||||||||||
| Sats2ConfigBrownoutLow | 1.3.6.1.4.1.534.10.2.4.9 | INTEGER | RO | 100 | |||||||||||||
scalar · INTEGER · read-only · current Setting of input brownout low voltage. Unit is 1 V.
Example values from LibreNMS test devices
| |||||||||||||||||
| Sats2ConfigBrownoutLowDerated | 1.3.6.1.4.1.534.10.2.4.10 | INTEGER | RO | ||||||||||||||
scalar · INTEGER · read-only · current Setting of input brownout low derated voltage. Unit is 1 V.
| |||||||||||||||||
| Sats2ConfigBrownoutHigh | 1.3.6.1.4.1.534.10.2.4.11 | INTEGER | RO | 276 | |||||||||||||
scalar · INTEGER · read-only · current Setting of input brownout high voltage. Unit is 1 V.
Example values from LibreNMS test devices
| |||||||||||||||||
| Sats2ConfigHysteresisVoltage | 1.3.6.1.4.1.534.10.2.4.12 | INTEGER | RO | 10 | |||||||||||||
scalar · INTEGER · read-only · current Hysteresis between loss point and comeback point. Unit is 1 V.
Example values from LibreNMS test devices
| |||||||||||||||||
| Nats2Environment | 1.3.6.1.4.1.534.10.2.5 | ||||||||||||||||
| Sats2EnvRemoteTemp | 1.3.6.1.4.1.534.10.2.5.1 | INTEGER (-100..200) | RO | 27 | |||||||||||||
scalar · INTEGER (-100..200) · read-only · current The reading of an EMP's temperature sensor.
Example values from LibreNMS test devices
| |||||||||||||||||
| Sats2EnvRemoteHumidity | 1.3.6.1.4.1.534.10.2.5.2 | INTEGER (0..100) | RO | 24 | |||||||||||||
scalar · INTEGER (0..100) · read-only · current The reading of an EMP's humidity sensor.
Example values from LibreNMS test devices
| |||||||||||||||||
| Sats2EnvNumContacts | 1.3.6.1.4.1.534.10.2.5.3 | INTEGER (1..1024) | RO | 2 | |||||||||||||
scalar · INTEGER (1..1024) · read-only · current The number of Contacts in the ats2ContactSenseTable. This object indicates the number of rows in the ats2ContactSenseTable. Example values from LibreNMS test devices
| |||||||||||||||||
| Tats2ContactSenseTable | 1.3.6.1.4.1.534.10.2.5.4 | NA | |||||||||||||||
table · not-accessible · current A list of Contact Sensing table entries. The number of entries is given by the value of ats2EnvNumContacts. | |||||||||||||||||
| Rats2ContactsTableEntry | 1.3.6.1.4.1.534.10.2.5.4.1 | NA | |||||||||||||||
row · not-accessible · current An entry containing information applicable to a particular Contact input.
| |||||||||||||||||
| Cats2ContactIndex | 1.3.6.1.4.1.534.10.2.5.4.1.1 | INTEGER (1..1024) | RO | 1 | |||||||||||||
column · INTEGER (1..1024) · read-only · current The Contact identifier; identical to the Contact Number. This object is not-accessible to MIB browsers, but had to be changed to read-only to satisfy SMIv2 syntax checkers if it is included in traps. Example values from LibreNMS test devices
| |||||||||||||||||
| Cats2ContactType | 1.3.6.1.4.1.534.10.2.5.4.1.2 | INTEGER | RW | notUsed(4) | |||||||||||||
column · INTEGER · read-write · current The normal state for this contact. The 'other' (not 'Normally') state is the Active state for generating the ats2tdContactActiveNotice trap. If anyChange(3) is selected, then this trap is sent any time the contact changes to either Open or Closed. No traps are sent if the Contact is set to notUsed(4). In many cases, the configuration for Contacts may be done by other means, so this object may be read-only.
Example values from LibreNMS test devices
| |||||||||||||||||
| Cats2ContactState | 1.3.6.1.4.1.534.10.2.5.4.1.3 | INTEGER | RO | open(1) | |||||||||||||
column · INTEGER · read-only · current The current state of the Contact input; the value is based on the open/closed input state and the setting for ats2ContactType. When entering the openWithNotice(3) and closedWithNotice(4) states, no entries added to the ats2AlarmTable, but the ats2tdContactActiveNotice trap is sent.
Example values from LibreNMS test devices
| |||||||||||||||||
| Cats2ContactDescr | 1.3.6.1.4.1.534.10.2.5.4.1.4 | DisplayString (SIZE (0..63)) | RW | EMPDT1H1C2 @1-C1 | |||||||||||||
column · DisplayString (SIZE (0..63)) · read-write · current A label identifying the Contact. This object should be set by the administrator. Example values from LibreNMS test devices
| |||||||||||||||||
| Sats2EnvRemoteTempLowerLimit | 1.3.6.1.4.1.534.10.2.5.5 | INTEGER (-100..200) | RW | 0 | |||||||||||||
scalar · INTEGER (-100..200) · read-write · current The Lower Limit of the EMP temperature; if ats2EnvRemoteTemp falls below this value, the ats2RemoteTempBad alarm will occur.
Example values from LibreNMS test devices
| |||||||||||||||||
| Sats2EnvRemoteTempUpperLimit | 1.3.6.1.4.1.534.10.2.5.6 | INTEGER (-100..200) | RW | 80 | |||||||||||||
scalar · INTEGER (-100..200) · read-write · current The Upper Limit of the EMP temperature; if ats2EnvRemoteTemp rises above this value, the ats2RemoteTempBad alarm will occur. This value should be greater than ats2EnvRemoteTempLowerLimit.
Example values from LibreNMS test devices
| |||||||||||||||||
| Sats2EnvRemoteHumidityLowerLimit | 1.3.6.1.4.1.534.10.2.5.7 | INTEGER (0..100) | RW | 10 | |||||||||||||
scalar · INTEGER (0..100) · read-write · current The Lower Limit of the EMP humidity reading; if ats2EnvRemoteHumidity falls below this value, the ats2RemoteHumidityBad alarm will occur.
Example values from LibreNMS test devices
| |||||||||||||||||
| Sats2EnvRemoteHumidityUpperLimit | 1.3.6.1.4.1.534.10.2.5.8 | INTEGER (0..100) | RW | 90 | |||||||||||||
scalar · INTEGER (0..100) · read-write · current The Upper Limit of the EMP humidity reading; if ats2EnvRemoteHumidity rises above this value, the ats2RemoteHumidityBad alarm will occur. This value should be greater than ats2EnvRemoteHumidityLowerLimit.
Example values from LibreNMS test devices
| |||||||||||||||||
| Nats2Traps | 1.3.6.1.4.1.534.10.2.10 | ||||||||||||||||
| !ats2TrapCommunicationLost | 1.3.6.1.4.1.534.10.2.10.1 | ||||||||||||||||
notification · current Communication with the ATS failed. | |||||||||||||||||
| !ats2TrapCommunicationRecovered | 1.3.6.1.4.1.534.10.2.10.2 | ||||||||||||||||
notification · current Communication with the ATS recovered. | |||||||||||||||||
| !ats2TrapOutputPowered | 1.3.6.1.4.1.534.10.2.10.3 | ||||||||||||||||
notification · current The ATS powers the load. | |||||||||||||||||
| !ats2TrapOutputNotPowered | 1.3.6.1.4.1.534.10.2.10.4 | ||||||||||||||||
notification · current The ATS does not powers the load. | |||||||||||||||||
| !ats2TrapOverload | 1.3.6.1.4.1.534.10.2.10.5 | ||||||||||||||||
notification · current The ATS has sensed a critical overload. | |||||||||||||||||
| !ats2TrapNoOverLoad | 1.3.6.1.4.1.534.10.2.10.6 | ||||||||||||||||
notification · current The critical overload disappeared. | |||||||||||||||||
| !ats2TrapInternalFailure | 1.3.6.1.4.1.534.10.2.10.7 | ||||||||||||||||
notification · current The ATS has an internal failure (sum of all HW internal failure). | |||||||||||||||||
| !ats2TrapNoInternalFailure | 1.3.6.1.4.1.534.10.2.10.8 | ||||||||||||||||
notification · current The ATS internal failure disappeared. | |||||||||||||||||
| !ats2TrapSource1Normal | 1.3.6.1.4.1.534.10.2.10.9 | ||||||||||||||||
notification · current Source 1 returns to normal. | |||||||||||||||||
| !ats2TrapSource1OutOfRange | 1.3.6.1.4.1.534.10.2.10.10 | ||||||||||||||||
notification · current Source 1 out of range. | |||||||||||||||||
| !ats2TrapSource2Normal | 1.3.6.1.4.1.534.10.2.10.11 | ||||||||||||||||
notification · current Source 2 returns to normal. | |||||||||||||||||
| !ats2TrapSource2OutOfRange | 1.3.6.1.4.1.534.10.2.10.12 | ||||||||||||||||
notification · current Source 2 out of range. | |||||||||||||||||
| !ats2TrapSourceDesynchronized | 1.3.6.1.4.1.534.10.2.10.13 | ||||||||||||||||
notification · current Source 1 and Source 2 phase are desynchronized. | |||||||||||||||||
| !ats2TrapSourceSynchronized | 1.3.6.1.4.1.534.10.2.10.14 | ||||||||||||||||
notification · current Source 1 and Source 2 phase are synchronized. | |||||||||||||||||
| !ats2TrapOutputPoweredBySource1 | 1.3.6.1.4.1.534.10.2.10.15 | ||||||||||||||||
notification · current Source 1 powers the output. | |||||||||||||||||
| !ats2TrapOutputPoweredBySource2 | 1.3.6.1.4.1.534.10.2.10.16 | ||||||||||||||||
notification · current Source 2 powers the output. | |||||||||||||||||
| !ats2TrapRemoteTempLow | 1.3.6.1.4.1.534.10.2.10.20 | ||||||||||||||||
notification · current The remote temperature, ats2EnvRemoteTemp, has fallen below the set lower limit, ats2EnvRemoteTempLowerLimit. | |||||||||||||||||
| !ats2TrapRemoteTempHigh | 1.3.6.1.4.1.534.10.2.10.21 | ||||||||||||||||
notification · current The remote temperature, ats2EnvRemoteTemp, has risen above the set upper limit, xupsEnvRemoteTempUpperLimit. | |||||||||||||||||
| !ats2TrapRemoteTempNormal | 1.3.6.1.4.1.534.10.2.10.22 | ||||||||||||||||
notification · current The remote temperature, ats2EnvRemoteTemp, is inside the interval defined by the lower limit and the upper limit. | |||||||||||||||||
| !ats2TrapRemoteHumidityLow | 1.3.6.1.4.1.534.10.2.10.23 | ||||||||||||||||
notification · current The remote humidity, ats2EnvRemoteHumidity, has fallen below the set lower limit, ats2EnvRemoteHumidityLowerLimit. | |||||||||||||||||
| !ats2TrapRemoteHumidityHigh | 1.3.6.1.4.1.534.10.2.10.24 | ||||||||||||||||
notification · current The remote humidity, ats2EnvRemoteHumidity, has risen above the set upper limit, ats2EnvRemoteHumidityUpperLimit. | |||||||||||||||||
| !ats2TrapRemoteHumidityNormal | 1.3.6.1.4.1.534.10.2.10.25 | ||||||||||||||||
notification · current The remote humidity, ats2EnvRemoteHumidity, is inside the interval defined by the lower limit and the upper limit. | |||||||||||||||||
| !ats2Contact1ActiveNotice | 1.3.6.1.4.1.534.10.2.10.26 | ||||||||||||||||
notification · current The Contact 1 is in its Active state.
The following are the situations that generate this trap:
For ats2ContactType: and ats2ContactState:
normallyOpen(1) and closedWithNotice(4)
normallyClosed(2) and openWithNotice(3)
anyChange(3) and openWithNotice(3) or closedWithNotice(4) | |||||||||||||||||
| !ats2Contact1InactiveNotice | 1.3.6.1.4.1.534.10.2.10.27 | ||||||||||||||||
notification · current The Contact 1 has changed to its Inactive state. | |||||||||||||||||
| !ats2Contact2ActiveNotice | 1.3.6.1.4.1.534.10.2.10.28 | ||||||||||||||||
notification · current The Contact 2 is in its Active state.
The following are the situations that generate this trap:
For ats2ContactType: and ats2ContactState:
normallyOpen(1) and closedWithNotice(4)
normallyClosed(2) and openWithNotice(3)
anyChange(3) and openWithNotice(3) or closedWithNotice(4) | |||||||||||||||||
| !ats2Contact2InactiveNotice | 1.3.6.1.4.1.534.10.2.10.29 | ||||||||||||||||
notification · current The Contact 2 has changed to its Inactive state. | |||||||||||||||||
| !ats2TestTrap | 1.3.6.1.4.1.534.10.2.10.40 | ||||||||||||||||
notification · current Sent whenever the trap test feature is used by the communication card. | |||||||||||||||||
Textual conventions
UnixTimeStampCounter32Display hint:
ddddddddddUnix time stamp. Measured in seconds since January 1, 1970.
Traps / Notifications
- ats2Contact1ActiveNotice
1.3.6.1.4.1.534.10.2.10.26 - ats2Contact1InactiveNotice
1.3.6.1.4.1.534.10.2.10.27 - ats2Contact2ActiveNotice
1.3.6.1.4.1.534.10.2.10.28 - ats2Contact2InactiveNotice
1.3.6.1.4.1.534.10.2.10.29 - ats2TestTrap
1.3.6.1.4.1.534.10.2.10.40 - ats2TrapCommunicationLost
1.3.6.1.4.1.534.10.2.10.1 - ats2TrapCommunicationRecovered
1.3.6.1.4.1.534.10.2.10.2 - ats2TrapInternalFailure
1.3.6.1.4.1.534.10.2.10.7 - ats2TrapNoInternalFailure
1.3.6.1.4.1.534.10.2.10.8 - ats2TrapNoOverLoad
1.3.6.1.4.1.534.10.2.10.6 - ats2TrapOutputNotPowered
1.3.6.1.4.1.534.10.2.10.4 - ats2TrapOutputPowered
1.3.6.1.4.1.534.10.2.10.3 - ats2TrapOutputPoweredBySource1
1.3.6.1.4.1.534.10.2.10.15 - ats2TrapOutputPoweredBySource2
1.3.6.1.4.1.534.10.2.10.16 - ats2TrapOverload
1.3.6.1.4.1.534.10.2.10.5 - ats2TrapRemoteHumidityHigh
1.3.6.1.4.1.534.10.2.10.24 - ats2TrapRemoteHumidityLow
1.3.6.1.4.1.534.10.2.10.23 - ats2TrapRemoteHumidityNormal
1.3.6.1.4.1.534.10.2.10.25 - ats2TrapRemoteTempHigh
1.3.6.1.4.1.534.10.2.10.21 - ats2TrapRemoteTempLow
1.3.6.1.4.1.534.10.2.10.20 - ats2TrapRemoteTempNormal
1.3.6.1.4.1.534.10.2.10.22 - ats2TrapSource1Normal
1.3.6.1.4.1.534.10.2.10.9 - ats2TrapSource1OutOfRange
1.3.6.1.4.1.534.10.2.10.10 - ats2TrapSource2Normal
1.3.6.1.4.1.534.10.2.10.11 - ats2TrapSource2OutOfRange
1.3.6.1.4.1.534.10.2.10.12 - ats2TrapSourceDesynchronized
1.3.6.1.4.1.534.10.2.10.13 - ats2TrapSourceSynchronized
1.3.6.1.4.1.534.10.2.10.14