MWR-ETHERNET-MIB
DragonWaveThis specifies the contact information and the revision tracking information for the MIB module version.
snmptranslate -m MWR-ETHERNET-MIB -Tpsnmpwalk -v2c -c <community> -m MWR-ETHERNET-MIB <host> 1.3.6.1.4.1.7262.4.5.1000Imports
| DWI-HARMONY-PRIVATE-MIB | mwr |
|---|---|
| EQUIPMENT-COMMON-MIB | EnableType, equipmentAlarmActiveConditionId, equipmentOutTrapsCounter, equipmentTrapInfo |
| INET-ADDRESS-MIB | InetAddress, InetAddressType |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
| SNMPv2-SMI | Bits, Counter32, Counter64, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso |
| SNMPv2-TC | DateAndTime, DisplayString, PhysAddress, RowStatus, TEXTUAL-CONVENTION, TruthValue |
OID tree
| Name | OID | Type | Access | Status | Example | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| NmwrPlatformObjId | 1.3.6.1.4.1.7262.4.5.1 | ||||||||||||
| NmwrEbandObjId | 1.3.6.1.4.1.7262.4.5.1.1 | ||||||||||||
| NmwrEnhancedObjId | 1.3.6.1.4.1.7262.4.5.1.2 | ||||||||||||
| NmwrSystem | 1.3.6.1.4.1.7262.4.5.2 | ||||||||||||
| NmwrSystemConfigurations | 1.3.6.1.4.1.7262.4.5.2.1 | ||||||||||||
| SmwrSystemType | 1.3.6.1.4.1.7262.4.5.2.1.1 | INTEGER | RW | 4 | |||||||||
scalar · INTEGER · read-write · current Available system types for single carrier and multi carriers systems are: onePlusZero1cr - 1+0 single carrier onePlusZero2cr - 1+0 dual carriers onePlusZero2crXpic - 1+0 dual carriers XPIC
Example values from LibreNMS test devices
| |||||||||||||
| SmwrPacketSwitchMode | 1.3.6.1.4.1.7262.4.5.2.1.2 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current In bridge mode the system is always inband managed on any of the user ports. However in port-isolation mode, the system can be managed outOfBand or inband on a specific port.
| |||||||||||||
| NmwrSysSpeed | 1.3.6.1.4.1.7262.4.5.2.1.3 | ||||||||||||
| SmwrSystemCurrentSpeed | 1.3.6.1.4.1.7262.4.5.2.1.3.1 | Integer32 (0..1000) | RW | ||||||||||
scalar · Integer32 (0..1000) · read-write · current Changes the working speed of the system. | |||||||||||||
| NmwrSystemStatus | 1.3.6.1.4.1.7262.4.5.2.2 | ||||||||||||
| SmwrSystemOperStatus | 1.3.6.1.4.1.7262.4.5.2.2.1 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current The current operational state of the system.
| |||||||||||||
| SmwrSystemFaultSeverity | 1.3.6.1.4.1.7262.4.5.2.2.2 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current The current state of the most serious system alarm severity. If system is running diagnostics, the status will be test.
| |||||||||||||
| SmwrSystemTemperature | 1.3.6.1.4.1.7262.4.5.2.2.3 | Integer32 | RO | 30 | |||||||||
scalar · Integer32 · read-only · current The current system temperature. Example values from LibreNMS test devices
| |||||||||||||
| SmwrPlatformType | 1.3.6.1.4.1.7262.4.5.2.2.4 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Identifies the system platform type. The possible system types are: - eband - enhanced - enhanced-mc
| |||||||||||||
| SmwrPacketSwitchModeStatus | 1.3.6.1.4.1.7262.4.5.2.2.5 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current This object indicates the running configuration for the packet switch mode.
| |||||||||||||
| SmwrSystemTypeStatus | 1.3.6.1.4.1.7262.4.5.2.2.6 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current This object indicates the running configuration for the system type status.
| |||||||||||||
| NmwrSystemCommands | 1.3.6.1.4.1.7262.4.5.2.3 | ||||||||||||
| SmwrResetSystem | 1.3.6.1.4.1.7262.4.5.2.3.1 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Writing '1' to this object resets the system.
| |||||||||||||
| SmwrSaveConfig | 1.3.6.1.4.1.7262.4.5.2.3.2 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Writing '1' or 'save' to this object saves running configuration of the system.
| |||||||||||||
| SmwrDeleteConfig | 1.3.6.1.4.1.7262.4.5.2.3.3 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Using this object, either the startup config or the switch config can be deleted. Deleting startup config removes all system configuration for next system restart. Deleting switch config only clears the switch configuration.
| |||||||||||||
| NmwrSystemInventory | 1.3.6.1.4.1.7262.4.5.2.4 | ||||||||||||
| NmwrHwInventory | 1.3.6.1.4.1.7262.4.5.2.4.1 | ||||||||||||
| SmwrMacAddress | 1.3.6.1.4.1.7262.4.5.2.4.1.1 | DisplayString | RO | ||||||||||
scalar · DisplayString · read-only · current The MAC Address of the system. | |||||||||||||
| SmwrTargetCfgFilePartNumber | 1.3.6.1.4.1.7262.4.5.2.4.1.2 | DisplayString | RO | ||||||||||
scalar · DisplayString · read-only · current A textual string containing part number of the target configuration file. | |||||||||||||
| SmwrUnitSerialNo | 1.3.6.1.4.1.7262.4.5.2.4.1.3 | DisplayString | RO | <private> | |||||||||
scalar · DisplayString · read-only · current A textual string containing Serial Number of the Unit. Example values from LibreNMS test devices
| |||||||||||||
| SmwrUnitAssemblyNo | 1.3.6.1.4.1.7262.4.5.2.4.1.4 | DisplayString | RO | ||||||||||
scalar · DisplayString · read-only · current A textual string containing the Assembly Number of the Unit. | |||||||||||||
| SmwrBasebandSerialNo | 1.3.6.1.4.1.7262.4.5.2.4.1.5 | DisplayString | RO | ||||||||||
scalar · DisplayString · read-only · current A textual string containing Serial no of the baseband. | |||||||||||||
| SmwrBasebandAssemblyNo | 1.3.6.1.4.1.7262.4.5.2.4.1.6 | DisplayString | RO | ||||||||||
scalar · DisplayString · read-only · current A textual string containing assembly no of the baseband. | |||||||||||||
| SmwrPsuSerialNo | 1.3.6.1.4.1.7262.4.5.2.4.1.7 | DisplayString | RO | ||||||||||
scalar · DisplayString · read-only · current A textual string containing Serial no of the PSU. | |||||||||||||
| SmwrPsuAssemblyNo | 1.3.6.1.4.1.7262.4.5.2.4.1.8 | DisplayString | RO | ||||||||||
scalar · DisplayString · read-only · current A textual string containing assembly no of the PSU. | |||||||||||||
| SmwrRfSerialNo | 1.3.6.1.4.1.7262.4.5.2.4.1.9 | DisplayString | RO | ||||||||||
scalar · DisplayString · read-only · current A textual string containing Serial no of the RF. | |||||||||||||
| SmwrRfAssemblyNo | 1.3.6.1.4.1.7262.4.5.2.4.1.10 | DisplayString | RO | ||||||||||
scalar · DisplayString · read-only · current A textual string containing assembly no of the RF. | |||||||||||||
| SmwrRfRevisionNo | 1.3.6.1.4.1.7262.4.5.2.4.1.11 | DisplayString | RO | ||||||||||
scalar · DisplayString · read-only · current A textual string containing revision no of the RF. | |||||||||||||
| SmwrDiplexerSerialNo | 1.3.6.1.4.1.7262.4.5.2.4.1.12 | DisplayString | RO | ||||||||||
scalar · DisplayString · read-only · current A textual string containing Serial no of the Diplexer. | |||||||||||||
| SmwrDiplexerAssemblyNo | 1.3.6.1.4.1.7262.4.5.2.4.1.13 | DisplayString | RO | ||||||||||
scalar · DisplayString · read-only · current A textual string containing assembly no of the Diplexer. | |||||||||||||
| SmwrSystemCleiNo | 1.3.6.1.4.1.7262.4.5.2.4.1.14 | DisplayString | RO | ||||||||||
scalar · DisplayString · read-only · current A textual string containing system CLEI code. | |||||||||||||
| NmwrSwInventory | 1.3.6.1.4.1.7262.4.5.2.4.2 | ||||||||||||
| TmwrSwInventoryTable | 1.3.6.1.4.1.7262.4.5.2.4.2.1 | NA | |||||||||||
table · not-accessible · current Table containing the software inventory. | |||||||||||||
| RmwrSwInventoryEntry | 1.3.6.1.4.1.7262.4.5.2.4.2.1.1 | NA | |||||||||||
| CmwrSwInvBank | 1.3.6.1.4.1.7262.4.5.2.4.2.1.1.1 | INTEGER | NA | ||||||||||
column · INTEGER · not-accessible · current Software bank in the flash.
| |||||||||||||
| CmwrSwInvStatus | 1.3.6.1.4.1.7262.4.5.2.4.2.1.1.2 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current Software bank status.
| |||||||||||||
| CmwrSwInvOmniRelease | 1.3.6.1.4.1.7262.4.5.2.4.2.1.1.3 | DisplayString | RO | 1.0.4 | |||||||||
column · DisplayString · read-only · current The version number of the Omni. Example values from LibreNMS test devices
| |||||||||||||
| CmwrSwInvTargetConfFileVersion | 1.3.6.1.4.1.7262.4.5.2.4.2.1.1.4 | DisplayString | RO | ||||||||||
column · DisplayString · read-only · current The version number of the target configuration file. | |||||||||||||
| CmwrSwInvMibVersion | 1.3.6.1.4.1.7262.4.5.2.4.2.1.1.5 | DisplayString | RO | ||||||||||
column · DisplayString · read-only · current The version number of the system MIB. | |||||||||||||
| CmwrSwInvSecurityVersion | 1.3.6.1.4.1.7262.4.5.2.4.2.1.1.6 | DisplayString | RO | ||||||||||
column · DisplayString · read-only · current The version number of the security package. | |||||||||||||
| NmwrSystemNotifications | 1.3.6.1.4.1.7262.4.5.2.5 | ||||||||||||
| !mwrSysTcfInvalid | 1.3.6.1.4.1.7262.4.5.2.5.1 | ||||||||||||
notification · current This notification is raised when The HW specific factory defined information (TCF) in the system is not valid. | |||||||||||||
| !mwrSysTempOutOfLimit | 1.3.6.1.4.1.7262.4.5.2.5.2 | ||||||||||||
notification · current This notification is raised when the system temperature is out of limits. | |||||||||||||
| NmwrSoftware | 1.3.6.1.4.1.7262.4.5.3 | ||||||||||||
| NmwrSoftwareConfigurations | 1.3.6.1.4.1.7262.4.5.3.1 | ||||||||||||
| NmwrSoftwareStatus | 1.3.6.1.4.1.7262.4.5.3.2 | ||||||||||||
| SmwrSwBackupBankStatus | 1.3.6.1.4.1.7262.4.5.3.2.1 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current This object represents the status of the backup bank.
| |||||||||||||
| NmwrSoftwareCommands | 1.3.6.1.4.1.7262.4.5.3.3 | ||||||||||||
| SmwrSwCommit | 1.3.6.1.4.1.7262.4.5.3.3.1 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Writing '1' to this object commits all the active bank settings to the backup bank.
| |||||||||||||
| SmwrSwSwitchBanks | 1.3.6.1.4.1.7262.4.5.3.3.2 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current This objects switches bank to the specified bank. Next time the system resets, it loads up from that bank.
| |||||||||||||
| NmwrSoftwareNotifications | 1.3.6.1.4.1.7262.4.5.3.4 | ||||||||||||
| NmwrLicensing | 1.3.6.1.4.1.7262.4.5.4 | ||||||||||||
| NmwrLicensingConfigurations | 1.3.6.1.4.1.7262.4.5.4.1 | ||||||||||||
| SmwrLicenseUpgradeKey | 1.3.6.1.4.1.7262.4.5.4.1.1 | OCTET STRING (SIZE (33)) | RW | ||||||||||
scalar · OCTET STRING (SIZE (33)) · read-write · current The 33 Bytes licensing key used for upgrading features/capacity. Reading this object always returns an empty string. | |||||||||||||
| NmwrLicensingStatus | 1.3.6.1.4.1.7262.4.5.4.2 | ||||||||||||
| SmwrLicenseCount | 1.3.6.1.4.1.7262.4.5.4.2.1 | Integer32 | RO | ||||||||||
scalar · Integer32 · read-only · current This object indicates the number of times the system has been upgraded/downgraded with features/capacity. | |||||||||||||
| SmwrLicensedSpeed | 1.3.6.1.4.1.7262.4.5.4.2.2 | Integer32 | RO | ||||||||||
scalar · Integer32 · read-only · current This object indicates the system licensed speed. | |||||||||||||
| TmwrLicenseFeaturesTable | 1.3.6.1.4.1.7262.4.5.4.2.3 | NA | |||||||||||
table · not-accessible · current A table containing supported system licensed features. | |||||||||||||
| RmwrLicenseFeaturesEntry | 1.3.6.1.4.1.7262.4.5.4.2.3.1 | NA | |||||||||||
row · not-accessible · current A table entry containing supported system licensed features. | |||||||||||||
| CmwrLicenseFeatureIndex | 1.3.6.1.4.1.7262.4.5.4.2.3.1.1 | Integer32 | NA | ||||||||||
column · Integer32 · not-accessible · current This object indicates the list of system features. | |||||||||||||
| CmwrLicenseFeatureId | 1.3.6.1.4.1.7262.4.5.4.2.3.1.2 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current 2 ACM (includes WMA where applicable) (LF2) 3 Ethernet UNI (ELINE/ELAN MEF service) (LF3) 4 Packet Fragmentation (LF4) 5 Secured Access (LF5) 6 Ethernet OAM (802.1ag, 802.3ah, Y.1731) (LF6) 7 Advanced Performance Monitoring (LF7) 11 Bandwidth Accelerator (LF11) 13 Header Compression (LF13) | |||||||||||||
| CmwrLicenseFeature | 1.3.6.1.4.1.7262.4.5.4.2.3.1.3 | DisplayString | RO | ||||||||||
column · DisplayString · read-only · current The name of the feature. | |||||||||||||
| CmwrLicenseFeatureStatus | 1.3.6.1.4.1.7262.4.5.4.2.3.1.4 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current Specifies whether the feature is unlicensed or licensed.
| |||||||||||||
| NmwrSyncE | 1.3.6.1.4.1.7262.4.5.5 | ||||||||||||
| NmwrSyncEConfigurations | 1.3.6.1.4.1.7262.4.5.5.1 | ||||||||||||
| SmwrSyncEState | 1.3.6.1.4.1.7262.4.5.5.1.1 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current In manual mode, SyncE source will use primary clock source and when the primary source has loss of lock, the SyncE goes into holdover. The primary source will be used again after the system regains the lock on primary source. In auto mode, if the current clock source goes out of lock, the recovered clock from the other source will be used.
| |||||||||||||
| SmwrSyncEPrimarySource | 1.3.6.1.4.1.7262.4.5.5.1.2 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Selects which port to be used as SyncE master clock source.
| |||||||||||||
| SmwrSyncESecondarySource | 1.3.6.1.4.1.7262.4.5.5.1.3 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Selects which port to be used as SyncE clock source when the master SyncE clock source is not available.
| |||||||||||||
| SmwrSyncEMemberPorts | 1.3.6.1.4.1.7262.4.5.5.1.4 | DisplayString | RW | ||||||||||
scalar · DisplayString · read-write · current Enter a string indicating all SyncE member ports. Example: gi01 gi04 Port options: gi01 gi02 gi03 gi04 radio | |||||||||||||
| SmwrSyncEForcedHoldover | 1.3.6.1.4.1.7262.4.5.5.1.5 | DisplayString | RW | ||||||||||
scalar · DisplayString · read-write · current This forces SyncE into holdover mode. After the configurable timeout value, the forced holdover will be taken out. The forced timeout can be 0 to 300sec, where 0 means infinite and default is 30sec. An example of the format of the string is as follows: 'on 20' or 'off'. The second parameter indicates the holdover time in sec. The single quote marks i.e. ' ' are not used in the command. | |||||||||||||
| SmwrSyncERevertive | 1.3.6.1.4.1.7262.4.5.5.1.6 | DisplayString | RW | ||||||||||
scalar · DisplayString · read-write · current In revertive mode, if the current source is secondary and the primary is Ok for configured amount of time, the primary will be used. The default revertive time is 10sec. An example of the format of the string is as follows: 'on 20' or 'off'. The second parameter when revertive is turned on is the time in sec. The single quote marks i.e. ' ' are not used in the command. | |||||||||||||
| SmwrSyncEWanderFilter | 1.3.6.1.4.1.7262.4.5.5.1.7 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current ITU G.8262 specifies different wander filter requirements for networks based on the 2.048 kbit/s hierarchy , option1, vs those based on the 1.544kbit/s hierarchy, option2. Option 2 specifies a low pass filter bandwidth of 0.1Hz, while option1 specifies a bandwidth between 1 and 10 Hz.
| |||||||||||||
| NmwrSyncEStatus | 1.3.6.1.4.1.7262.4.5.5.2 | ||||||||||||
| SmwrSyncEClockSource | 1.3.6.1.4.1.7262.4.5.5.2.1 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Retrieves SyncE clock source currently in use.
| |||||||||||||
| SmwrSyncEAcquisitionStatus | 1.3.6.1.4.1.7262.4.5.5.2.2 | DisplayString | RO | ||||||||||
scalar · DisplayString · read-only · current Retrieves SyncE acquisition status. | |||||||||||||
| NmwrSyncENotifications | 1.3.6.1.4.1.7262.4.5.5.3 | ||||||||||||
| !mwrSynceLostLock | 1.3.6.1.4.1.7262.4.5.5.3.1 | ||||||||||||
notification · current This notification is raised when system has lost synchronization to syncE clock source. | |||||||||||||
| !mwrSynceSecondarySourceInUse | 1.3.6.1.4.1.7262.4.5.5.3.2 | ||||||||||||
notification · current This notification is raised whens ystem has lost synchronization to primary syncE clock source, and now synchronized to secondary source. | |||||||||||||
| !mwrSynceConfigMismatch | 1.3.6.1.4.1.7262.4.5.5.3.3 | ||||||||||||
notification · current This notification is raised when the configuration of syncE between the peers in the radio link is mismatched. | |||||||||||||
| NmwrTiming | 1.3.6.1.4.1.7262.4.5.6 | ||||||||||||
| NmwrTimingConfigurations | 1.3.6.1.4.1.7262.4.5.6.1 | ||||||||||||
| SmwrDateTime | 1.3.6.1.4.1.7262.4.5.6.1.1 | DateAndTime | RW | ||||||||||
scalar · DateAndTime · read-write · current The system date and time. | |||||||||||||
| SmwrSntpEnable | 1.3.6.1.4.1.7262.4.5.6.1.2 | EnableType | RW | ||||||||||
scalar · EnableType · read-write · current Indicates whether SNTP feature is enabled. | |||||||||||||
| SmwrSntpOffset | 1.3.6.1.4.1.7262.4.5.6.1.3 | Integer32 (-140..140) | RW | ||||||||||
scalar · Integer32 (-140..140) · read-write · current System time offset from GMT in tenths of hours. For example, an offset of 10 indicates 10 tenths, or 1 hour. An offset of 5 indicates half an hour. | |||||||||||||
| TmwrSntpServerTable | 1.3.6.1.4.1.7262.4.5.6.1.4 | NA | |||||||||||
table · not-accessible · current Table containing SNTP server entries | |||||||||||||
| RmwrSntpServerEntry | 1.3.6.1.4.1.7262.4.5.6.1.4.1 | NA | |||||||||||
| CmwrSntpServerIndex | 1.3.6.1.4.1.7262.4.5.6.1.4.1.1 | Integer32 (1..5) | NA | ||||||||||
column · Integer32 (1..5) · not-accessible · current A unique value for each server. | |||||||||||||
| CmwrSntpServerDomain | 1.3.6.1.4.1.7262.4.5.6.1.4.1.2 | InetAddressType | RW | ||||||||||
column · InetAddressType · read-write · current Indicates SNTP server inet address type. Valid types are ipv4 or ipv6. | |||||||||||||
| CmwrSntpServerAddress | 1.3.6.1.4.1.7262.4.5.6.1.4.1.3 | InetAddress | RW | ||||||||||
column · InetAddress · read-write · current Indicates SNTP server inet address octet string. | |||||||||||||
| CmwrSntpServerStatus | 1.3.6.1.4.1.7262.4.5.6.1.4.1.4 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current The status of the SNTP server.
| |||||||||||||
| CmwrSntpServerStratum | 1.3.6.1.4.1.7262.4.5.6.1.4.1.5 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current Specifies the stratum of a server, 0 for failed server | |||||||||||||
| NmwrTimingStatus | 1.3.6.1.4.1.7262.4.5.6.2 | ||||||||||||
| SmwrTimingLastDateTimeChanged | 1.3.6.1.4.1.7262.4.5.6.2.1 | DateAndTime | RO | ||||||||||
scalar · DateAndTime · read-only · current Date and Time for the last system time adjustment. | |||||||||||||
| SmwrTimingLastTimeAdjustment | 1.3.6.1.4.1.7262.4.5.6.2.2 | Integer32 | RO | ||||||||||
scalar · Integer32 · read-only · current Last system time adjustment in hundredths of seconds. | |||||||||||||
| SmwrTimingCummulativeTimeChange | 1.3.6.1.4.1.7262.4.5.6.2.3 | Integer32 | RO | ||||||||||
scalar · Integer32 · read-only · current Cumulative system time adjustment in hundredths of seconds. | |||||||||||||
| NmwrTimingCommands | 1.3.6.1.4.1.7262.4.5.6.3 | ||||||||||||
| SmwrSntpRestoreDefault | 1.3.6.1.4.1.7262.4.5.6.3.1 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Restores SNTP servers to default Addresses.
| |||||||||||||
| NmwrTimingNotifications | 1.3.6.1.4.1.7262.4.5.6.4 | ||||||||||||
| !mwrSntpServerUnreachable | 1.3.6.1.4.1.7262.4.5.6.4.1 | ||||||||||||
notification · current This notification is raised when one or more of the configured SNTP server is not reachable by the system. | |||||||||||||
| !mwrSystemTimeCorrected | 1.3.6.1.4.1.7262.4.5.6.4.2 | ||||||||||||
notification · current This notification is raised change in system time is detected, and system time is adjusted | |||||||||||||
| NmwrAAA | 1.3.6.1.4.1.7262.4.5.7 | ||||||||||||
| NmwrAAAConfigurations | 1.3.6.1.4.1.7262.4.5.7.1 | ||||||||||||
| SmwrAAAUserAuthentication | 1.3.6.1.4.1.7262.4.5.7.1.1 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current This object configures the user authentication method.
| |||||||||||||
| NmwrRadiusConfigurations | 1.3.6.1.4.1.7262.4.5.7.1.2 | ||||||||||||
| SmwrRadiusAdminUserStrict | 1.3.6.1.4.1.7262.4.5.7.1.2.1 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current If strict mode is off, the admin user can login when radius is turned off or unreachable. When strict mode is on, admin user will only be authenticated against the radius server.
| |||||||||||||
| SmwrRadiusServerTimeOut | 1.3.6.1.4.1.7262.4.5.7.1.2.2 | Integer32 | RW | ||||||||||
scalar · Integer32 · read-write · current Timeout period for authentication requests | |||||||||||||
| SmwrRadiusServerDeadTime | 1.3.6.1.4.1.7262.4.5.7.1.2.3 | Integer32 | RW | ||||||||||
scalar · Integer32 · read-write · current Time to declare an unresponsive server 'dead' | |||||||||||||
| SmwrRadiusServerReTransmit | 1.3.6.1.4.1.7262.4.5.7.1.2.4 | Integer32 | RW | ||||||||||
scalar · Integer32 · read-write · current Maximum number of retransmits to an unresponsive server | |||||||||||||
| TmwrRadiusServerTable | 1.3.6.1.4.1.7262.4.5.7.1.2.5 | NA | |||||||||||
table · not-accessible · current Table containing radius server entries | |||||||||||||
| RmwrRadiusServerEntry | 1.3.6.1.4.1.7262.4.5.7.1.2.5.1 | NA | |||||||||||
| CmwrRadiusServerIndex | 1.3.6.1.4.1.7262.4.5.7.1.2.5.1.1 | Integer32 (1..5) | NA | ||||||||||
column · Integer32 (1..5) · not-accessible · current A unique value for each radius server. | |||||||||||||
| CmwrRadiusCfgdHostDomain | 1.3.6.1.4.1.7262.4.5.7.1.2.5.1.2 | InetAddressType | RW | ||||||||||
column · InetAddressType · read-write · current Indicates configured radius inet address type. Valid types are ipv4 or ipv6. | |||||||||||||
| CmwrRadiusCfgdHostAddress | 1.3.6.1.4.1.7262.4.5.7.1.2.5.1.3 | InetAddress | RW | ||||||||||
column · InetAddress · read-write · current Indicates configured radius server inet address octet string. | |||||||||||||
| CmwrRadiusCfgdHostKey | 1.3.6.1.4.1.7262.4.5.7.1.2.5.1.4 | DisplayString (SIZE (0..32)) | RW | ||||||||||
column · DisplayString (SIZE (0..32)) · read-write · current The key of the configured radius server. | |||||||||||||
| NmwrNetworking | 1.3.6.1.4.1.7262.4.5.8 | ||||||||||||
| NmwrNetworkingConfigurations | 1.3.6.1.4.1.7262.4.5.8.1 | ||||||||||||
| NmwrNetMgmtPriority | 1.3.6.1.4.1.7262.4.5.8.1.1 | ||||||||||||
| SmwrNetMgmtVlanPriority | 1.3.6.1.4.1.7262.4.5.8.1.1.1 | Integer32 (0..7) | RW | ||||||||||
scalar · Integer32 (0..7) · read-write · current The object configures the VLAN priority(0...7) | |||||||||||||
| SmwrNetMgmtDscp | 1.3.6.1.4.1.7262.4.5.8.1.1.2 | Integer32 | RW | ||||||||||
scalar · Integer32 · read-write · current The Differentiated Services Code Point (DSCP) of IP traffic generated by the system (0...63) | |||||||||||||
| NmwrNetMgmtIpv4 | 1.3.6.1.4.1.7262.4.5.8.1.2 | ||||||||||||
| TmwrIpv4Table | 1.3.6.1.4.1.7262.4.5.8.1.2.1 | NA | |||||||||||
table · not-accessible · current A table containing the IPv4 information. | |||||||||||||
| RmwrIpv4Entry | 1.3.6.1.4.1.7262.4.5.8.1.2.1.1 | NA | |||||||||||
| CmwrIpv4Index | 1.3.6.1.4.1.7262.4.5.8.1.2.1.1.1 | Integer32 (1) | NA | ||||||||||
column · Integer32 (1) · not-accessible · current The IPv4 table index. There is only one entry in this table and can not be deleted. | |||||||||||||
| CmwrIpv4Address | 1.3.6.1.4.1.7262.4.5.8.1.2.1.1.2 | IpAddress | RW | ||||||||||
column · IpAddress · read-write · current The IPv4 address of the system. | |||||||||||||
| CmwrIpv4SubnetMask | 1.3.6.1.4.1.7262.4.5.8.1.2.1.1.3 | IpAddress | RW | ||||||||||
column · IpAddress · read-write · current The IPv4 subnet mask of the system. | |||||||||||||
| CmwrIpv4DefaultGateway | 1.3.6.1.4.1.7262.4.5.8.1.2.1.1.4 | IpAddress | RW | ||||||||||
column · IpAddress · read-write · current The IPv4 default gateway of the system. | |||||||||||||
| CmwrIpv4RowStatus | 1.3.6.1.4.1.7262.4.5.8.1.2.1.1.5 | RowStatus | RW | ||||||||||
column · RowStatus · read-write · current This object is used for applying ipv4 configuration attributes simultaneously. | |||||||||||||
| SmwrSecondaryGateway | 1.3.6.1.4.1.7262.4.5.8.1.2.2 | IpAddress | RW | ||||||||||
scalar · IpAddress · read-write · current The IPv4 secondary gateway of the system. | |||||||||||||
| NmwrNetMgmttIpv6 | 1.3.6.1.4.1.7262.4.5.8.1.3 | ||||||||||||
| TmwrIpv6Table | 1.3.6.1.4.1.7262.4.5.8.1.3.1 | NA | |||||||||||
table · not-accessible · current A table containing the IPv6 information. | |||||||||||||
| RmwrIpv6Entry | 1.3.6.1.4.1.7262.4.5.8.1.3.1.1 | NA | |||||||||||
| CmwrIpv6Index | 1.3.6.1.4.1.7262.4.5.8.1.3.1.1.1 | Integer32 (1) | NA | ||||||||||
column · Integer32 (1) · not-accessible · current The IPv6 table index. There is only one entry in this table and can not be deleted. | |||||||||||||
| CmwrIpv6Domain | 1.3.6.1.4.1.7262.4.5.8.1.3.1.1.2 | InetAddressType | RO | ||||||||||
column · InetAddressType · read-only · current Indicates ipv6 inet address type. | |||||||||||||
| CmwrIpv6Address | 1.3.6.1.4.1.7262.4.5.8.1.3.1.1.3 | InetAddress | RW | ||||||||||
column · InetAddress · read-write · current Indicates IPv6 inet address octet string. | |||||||||||||
| CmwrIpv6Prefix | 1.3.6.1.4.1.7262.4.5.8.1.3.1.1.4 | Integer32 | RW | ||||||||||
column · Integer32 · read-write · current Indicates ipv6 prefix. | |||||||||||||
| CmwrIpv6GatewayDomain | 1.3.6.1.4.1.7262.4.5.8.1.3.1.1.5 | InetAddressType | RO | ||||||||||
column · InetAddressType · read-only · current Indicates IPv6 gateway inet address type. This will always return IPv6 inet address type. | |||||||||||||
| CmwrIpv6GatewayAddress | 1.3.6.1.4.1.7262.4.5.8.1.3.1.1.6 | InetAddress | RW | ||||||||||
column · InetAddress · read-write · current Indicates IPv6 gateway inet address octet string. | |||||||||||||
| CmwrIpv6RowStatus | 1.3.6.1.4.1.7262.4.5.8.1.3.1.1.7 | RowStatus | RW | ||||||||||
column · RowStatus · read-write · current This object is used for applying IPv6 configuration attributes simultaneously. | |||||||||||||
| SmwrSecondaryIpv6GatewayDomain | 1.3.6.1.4.1.7262.4.5.8.1.3.2 | InetAddressType | RO | ||||||||||
scalar · InetAddressType · read-only · current This object will return the secondary IPv6 gateway inet address type. | |||||||||||||
| SmwrSecondaryIpv6GatewayAddress | 1.3.6.1.4.1.7262.4.5.8.1.3.3 | InetAddress | RW | ||||||||||
scalar · InetAddress · read-write · current This object will return the secondary IPv6 gateway inet address. | |||||||||||||
| NmwrUserInterfaceMgmt | 1.3.6.1.4.1.7262.4.5.8.1.4 | ||||||||||||
| SmwrTelnetEnable | 1.3.6.1.4.1.7262.4.5.8.1.4.1 | EnableType | RW | ||||||||||
scalar · EnableType · read-write · current Indicates whether telnet access is allowed. | |||||||||||||
| SmwrSshEnable | 1.3.6.1.4.1.7262.4.5.8.1.4.2 | EnableType | RW | ||||||||||
scalar · EnableType · read-write · current Indicates whether ssh access is allowed. This configuration only applies to security mode. | |||||||||||||
| SmwrHttpEnable | 1.3.6.1.4.1.7262.4.5.8.1.4.3 | EnableType | RW | ||||||||||
scalar · EnableType · read-write · current Indicates whether http is enabled. | |||||||||||||
| SmwrHttpsEnable | 1.3.6.1.4.1.7262.4.5.8.1.4.4 | EnableType | RW | ||||||||||
scalar · EnableType · read-write · current Indicates whether secured http access is allowed. This configuration only applies to security mode. | |||||||||||||
| SmwrSnmpv1v2cEnable | 1.3.6.1.4.1.7262.4.5.8.1.4.5 | EnableType | RW | ||||||||||
scalar · EnableType · read-write · current Indicates whether SNMP v1/v2c is allowed in security mode. This configuration only applies to security mode. | |||||||||||||
| SmwrFtpEnable | 1.3.6.1.4.1.7262.4.5.8.1.4.6 | EnableType | RW | ||||||||||
scalar · EnableType · read-write · current This object allows enabling or disabling ftp when in secure mode. By default ftp is enabled. | |||||||||||||
| NmwrFileTransfer | 1.3.6.1.4.1.7262.4.5.8.1.5 | ||||||||||||
| SmwrFileXfrDirection | 1.3.6.1.4.1.7262.4.5.8.1.5.1 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current The behavior of the FTP/SFTP machine: 1 - ServerMode 2 - ClientMode 3 - both Server and Client available Mwr 1.0 just supports Client Mode.
| |||||||||||||
| TmwrFileXfrTable | 1.3.6.1.4.1.7262.4.5.8.1.5.2 | NA | |||||||||||
table · not-accessible · current Table containing the FTP client parameters. | |||||||||||||
| RmwrFileXfrEntry | 1.3.6.1.4.1.7262.4.5.8.1.5.2.1 | NA | |||||||||||
| CmwrFileXfrSeqID | 1.3.6.1.4.1.7262.4.5.8.1.5.2.1.1 | Integer32 (1..20) | NA | ||||||||||
column · Integer32 (1..20) · not-accessible · current For the same manager, the possibility to define different FTP/SFTP transfer actions. | |||||||||||||
| CmwrFileXfrIdentifier | 1.3.6.1.4.1.7262.4.5.8.1.5.2.1.2 | INTEGER | RC | ||||||||||
column · INTEGER · read-create · current The identifier of the type of file to be imported/exported.
| |||||||||||||
| CmwrFileXfrName | 1.3.6.1.4.1.7262.4.5.8.1.5.2.1.3 | DisplayString (SIZE (1..32)) | RC | ||||||||||
column · DisplayString (SIZE (1..32)) · read-create · current The Name of the file to be imported/exported. | |||||||||||||
| CmwrFileXfrMode | 1.3.6.1.4.1.7262.4.5.8.1.5.2.1.4 | INTEGER | RC | ||||||||||
column · INTEGER · read-create · current The file transfer mode specifying either a ftp or sftp request. The sftp mode is only supported when security is licensed/installed.
| |||||||||||||
| CmwrFileXfrServerDomain | 1.3.6.1.4.1.7262.4.5.8.1.5.2.1.5 | InetAddressType | RC | ||||||||||
column · InetAddressType · read-create · current The server domain such as IPv4 or IPv6 type. | |||||||||||||
| CmwrFileXfrServerAddress | 1.3.6.1.4.1.7262.4.5.8.1.5.2.1.6 | InetAddress | RC | ||||||||||
column · InetAddress · read-create · current The server IP address in InetAddress format which could be an IPv4 or IPv6 address. | |||||||||||||
| CmwrFileXfrClientDirection | 1.3.6.1.4.1.7262.4.5.8.1.5.2.1.7 | INTEGER | RC | ||||||||||
column · INTEGER · read-create · current The behavior of the FTP or SFTP Client: 1 - import, i.e. download data file 2 - export, i.e. upload data file. The only supported option for omni and tcf is import since these files are used only in upgrade case. Also the supported option for pm, eventlog and perfLog is export option. The rest can be imported or exported.
| |||||||||||||
| CmwrFileXfrUserName | 1.3.6.1.4.1.7262.4.5.8.1.5.2.1.8 | DisplayString (SIZE (1..32)) | RC | ||||||||||
column · DisplayString (SIZE (1..32)) · read-create · current FTP or SFTP User Name when Client Mode is selected. | |||||||||||||
| CmwrFileXfrPassword | 1.3.6.1.4.1.7262.4.5.8.1.5.2.1.9 | DisplayString (SIZE (1..32)) | RC | ||||||||||
column · DisplayString (SIZE (1..32)) · read-create · current FTP or SFTP password when Client Mode is selected. For get operation - the returned value will be zero length string. | |||||||||||||
| CmwrFileXfrNumEntries | 1.3.6.1.4.1.7262.4.5.8.1.5.2.1.10 | Integer32 | RC | ||||||||||
column · Integer32 · read-create · current This object is used to indicate the number of entries for the performance log to be transferred. If it's set to zero, it will transfer the entire file. | |||||||||||||
| CmwrFileXfrStatus | 1.3.6.1.4.1.7262.4.5.8.1.5.2.1.11 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current This object contains the current status of the last requested import/export of the corresponding row component.
| |||||||||||||
| CmwrFileXfrRowStatus | 1.3.6.1.4.1.7262.4.5.8.1.5.2.1.12 | RowStatus | RC | ||||||||||
column · RowStatus · read-create · current The row status variable, used according to: - Manager can create a row using the createAndWait. - Once created, the row is put into notInService by Agent. - On Manager request, row status can be set to active one at a time. This means that the Client has to start the file transfer. - Row data, such as the FileServerAddress, User Name or Password can be changed once the row has been created, but only if this field is set to notInService. All other fields can not be set once the row is created, but the row must be removed and created again. - Manager can use destroy to remove the row. | |||||||||||||
| TmwrNetMgmtInterfaceTable | 1.3.6.1.4.1.7262.4.5.8.1.6 | NA | |||||||||||
table · not-accessible · current Table containing the network management interface configurations. | |||||||||||||
| RmwrNetMgmtInterfaceEntry | 1.3.6.1.4.1.7262.4.5.8.1.6.1 | NA | |||||||||||
row · not-accessible · current Entry for the network management interface table. | |||||||||||||
| CmwrNetMgmtInterfaceIndex | 1.3.6.1.4.1.7262.4.5.8.1.6.1.1 | Integer32 | NA | ||||||||||
column · Integer32 · not-accessible · current This object is an index to network management interface table. There will always be one entry in this table. | |||||||||||||
| CmwrNetMgmtVlanId | 1.3.6.1.4.1.7262.4.5.8.1.6.1.2 | Integer32 (1..4090) | RW | ||||||||||
column · Integer32 (1..4090) · read-write · current Indicates the VLAN Id (1...4090) | |||||||||||||
| CmwrNetMgmtInterface1 | 1.3.6.1.4.1.7262.4.5.8.1.6.1.3 | EnableType | RW | ||||||||||
column · EnableType · read-write · current When this object is enabled the gi0/1 port will be configured as a management port. Also the corresponding mode (inband/outOfBand) should be set as well. | |||||||||||||
| CmwrNetMgmtInterface1Mode | 1.3.6.1.4.1.7262.4.5.8.1.6.1.4 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current This object indicates whether the gi0/1 management interface is inband or outOfBand. This applies only when the packet switch mode is configured in port isolation mode. In Bridge mode setup, this will always be inband.
| |||||||||||||
| CmwrNetMgmtInterface1Tagged | 1.3.6.1.4.1.7262.4.5.8.1.6.1.5 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current This object indicates whether the system will be managed with vlan tagged management traffic or not.
| |||||||||||||
| CmwrNetMgmtInterface2 | 1.3.6.1.4.1.7262.4.5.8.1.6.1.6 | EnableType | RW | ||||||||||
column · EnableType · read-write · current When this object is enabled the gi0/2 port will be configured as a management port. Also the corresponding mode (inband/outOfBand) should be set as well. | |||||||||||||
| CmwrNetMgmtInterface2Mode | 1.3.6.1.4.1.7262.4.5.8.1.6.1.7 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current This object indicates whether the gi0/2 management interface is inband or outOfBand. This applies only when the packet switch mode is configured in port isolation mode. In Bridge mode setup, this will always be inband.
| |||||||||||||
| CmwrNetMgmtInterface2Tagged | 1.3.6.1.4.1.7262.4.5.8.1.6.1.8 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current This object indicates whether the system will be managed with vlan tagged management traffic or not.
| |||||||||||||
| CmwrNetMgmtInterface3 | 1.3.6.1.4.1.7262.4.5.8.1.6.1.9 | EnableType | RW | ||||||||||
column · EnableType · read-write · current When this object is enabled the gi0/3 port will be configured as a management port. Also the corresponding mode (inband/outOfBand) should be set as well. | |||||||||||||
| CmwrNetMgmtInterface3Mode | 1.3.6.1.4.1.7262.4.5.8.1.6.1.10 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current This object indicates whether the gi0/3 management interface is inband or outOfBand. This applies only when the packet switch mode is configured in port isolation mode. In Bridge mode setup, this will always be inband.
| |||||||||||||
| CmwrNetMgmtInterface3Tagged | 1.3.6.1.4.1.7262.4.5.8.1.6.1.11 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current This object indicates whether the system will be managed with vlan tagged management traffic or not.
| |||||||||||||
| CmwrNetMgmtInterface4 | 1.3.6.1.4.1.7262.4.5.8.1.6.1.12 | EnableType | RW | ||||||||||
column · EnableType · read-write · current When this object is enabled the gi0/4 port will be configured as a management port. Also the corresponding mode (inband/outOfBand) should be set as well. | |||||||||||||
| CmwrNetMgmtInterface4Mode | 1.3.6.1.4.1.7262.4.5.8.1.6.1.13 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current This object indicates whether the gi0/4 management interface is inband or outOfBand. This applies only when the packet switch mode is configured in port isolation mode. In Bridge mode setup, this will always be inband.
| |||||||||||||
| CmwrNetMgmtInterface4Tagged | 1.3.6.1.4.1.7262.4.5.8.1.6.1.14 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current This object indicates whether the system will be managed with vlan tagged management traffic or not.
| |||||||||||||
| CmwrNetMgmtInterfaceRowStatus | 1.3.6.1.4.1.7262.4.5.8.1.6.1.15 | RowStatus | RW | ||||||||||
column · RowStatus · read-write · current This object is used for applying all management interface configuration in an atomic operation. | |||||||||||||
| NmwrNetworkingStatus | 1.3.6.1.4.1.7262.4.5.8.2 | ||||||||||||
| NmwrMaintenanceIpv4 | 1.3.6.1.4.1.7262.4.5.8.2.1 | ||||||||||||
| SmwrMaintenanceIpv4Address | 1.3.6.1.4.1.7262.4.5.8.2.1.1 | IpAddress | RO | ||||||||||
scalar · IpAddress · read-only · current This object indicates the maintenance IPv4 address. | |||||||||||||
| SmwrMaintenanceSubnetMask | 1.3.6.1.4.1.7262.4.5.8.2.1.2 | IpAddress | RO | ||||||||||
scalar · IpAddress · read-only · current This object indicates the maintenance IPv4 subnet mask. | |||||||||||||
| SmwrActiveIpv4Gateway | 1.3.6.1.4.1.7262.4.5.8.2.1.3 | IpAddress | RO | ||||||||||
scalar · IpAddress · read-only · current This object indicates the active IPv4 gateway. | |||||||||||||
| NmwrMaintenanceIpv6 | 1.3.6.1.4.1.7262.4.5.8.2.2 | ||||||||||||
| SmwrIpv6LinkLocalIPrefix | 1.3.6.1.4.1.7262.4.5.8.2.2.1 | Integer32 | RO | ||||||||||
scalar · Integer32 · read-only · current This object indicates the IPv6 link local prefix. | |||||||||||||
| SmwrIpv6LinkLocalAddress | 1.3.6.1.4.1.7262.4.5.8.2.2.2 | InetAddress | RO | ||||||||||
scalar · InetAddress · read-only · current Indicates ipv6 link local inet address octet string. | |||||||||||||
| SmwrActiveIpv6Gateway | 1.3.6.1.4.1.7262.4.5.8.2.2.3 | InetAddress | RO | ||||||||||
scalar · InetAddress · read-only · current This object indicates the active IPv6 gateway. | |||||||||||||
| NmwrPeerNetworkingStatus | 1.3.6.1.4.1.7262.4.5.8.3 | ||||||||||||
| SmwrPeerMacAddress | 1.3.6.1.4.1.7262.4.5.8.3.1 | DisplayString | RO | ||||||||||
scalar · DisplayString · read-only · current The MAC Address of the peer. | |||||||||||||
| SmwrPeerIpv4Address | 1.3.6.1.4.1.7262.4.5.8.3.2 | IpAddress | RO | ||||||||||
scalar · IpAddress · read-only · current The peer IPv4 Address. | |||||||||||||
| SmwrPeerIpv4SubnetMask | 1.3.6.1.4.1.7262.4.5.8.3.3 | IpAddress | RO | ||||||||||
scalar · IpAddress · read-only · current The peer IPv4 subnet mask. | |||||||||||||
| SmwrPeerIpv4DefaultGateway | 1.3.6.1.4.1.7262.4.5.8.3.4 | IpAddress | RO | ||||||||||
scalar · IpAddress · read-only · current The peer IPv4 default gateway. | |||||||||||||
| SmwrPeerIpv6Prefix | 1.3.6.1.4.1.7262.4.5.8.3.5 | Integer32 | RO | ||||||||||
scalar · Integer32 · read-only · current The peer IPv6 prefix. | |||||||||||||
| SmwrPeerIpv6Domain | 1.3.6.1.4.1.7262.4.5.8.3.6 | InetAddressType | RO | ||||||||||
scalar · InetAddressType · read-only · current The peer IPv6 domain. | |||||||||||||
| SmwrPeerIpv6Address | 1.3.6.1.4.1.7262.4.5.8.3.7 | InetAddress | RO | ||||||||||
scalar · InetAddress · read-only · current The peer IPv6 address. | |||||||||||||
| SmwrPeerIpv6GatewayDomain | 1.3.6.1.4.1.7262.4.5.8.3.8 | InetAddressType | RO | ||||||||||
scalar · InetAddressType · read-only · current The peer IPv6 gateway domain | |||||||||||||
| SmwrPeerIpv6GatewayAddress | 1.3.6.1.4.1.7262.4.5.8.3.9 | InetAddress | RO | ||||||||||
scalar · InetAddress · read-only · current The peer IPv6 gateway address. | |||||||||||||
| SmwrPeerVlanId | 1.3.6.1.4.1.7262.4.5.8.3.10 | Integer32 | RO | ||||||||||
scalar · Integer32 · read-only · current The peer vlan Id. | |||||||||||||
| SmwrPeerVlanPriority | 1.3.6.1.4.1.7262.4.5.8.3.11 | Integer32 | RO | ||||||||||
scalar · Integer32 · read-only · current The peer vlan priority. | |||||||||||||
| SmwrPeerDscp | 1.3.6.1.4.1.7262.4.5.8.3.12 | Integer32 | RO | ||||||||||
scalar · Integer32 · read-only · current The peer management dscp. | |||||||||||||
| NmwrNetworkingNotifications | 1.3.6.1.4.1.7262.4.5.8.4 | ||||||||||||
| NmwrEthernet | 1.3.6.1.4.1.7262.4.5.9 | ||||||||||||
| NmwrEthernetConfigurations | 1.3.6.1.4.1.7262.4.5.9.1 | ||||||||||||
| NmwrQos | 1.3.6.1.4.1.7262.4.5.9.1.1 | ||||||||||||
| SmwrQosState | 1.3.6.1.4.1.7262.4.5.9.1.1.1 | EnableType | RW | ||||||||||
scalar · EnableType · read-write · current Indicates whether QOS is enabled. | |||||||||||||
| SmwrCosSource | 1.3.6.1.4.1.7262.4.5.9.1.1.2 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Indicates the class of service tag type. Based on the setting system will use the CoS value in the outer VLAN tag, inner VLAN tag, DSCP or MPLS exp.
| |||||||||||||
| SmwrOuterTpid | 1.3.6.1.4.1.7262.4.5.9.1.1.3 | DisplayString | RW | ||||||||||
scalar · DisplayString · read-write · current Sets the value of the Q-in-Q outer tag. This tag is also used to classify the single tagged traffic. Default value is 0x8100. | |||||||||||||
| SmwrInnerTpid | 1.3.6.1.4.1.7262.4.5.9.1.1.4 | DisplayString | RW | ||||||||||
scalar · DisplayString · read-write · current Sets the value of the Q-in-Q inner VLAN tag. Default value is 0x8100. | |||||||||||||
| TmwrCosTable | 1.3.6.1.4.1.7262.4.5.9.1.1.5 | NA | |||||||||||
table · not-accessible · current A table of Qos Settings per port, the configuration corresponds to the egress QoS of radio port. | |||||||||||||
| RmwrCosEntry | 1.3.6.1.4.1.7262.4.5.9.1.1.5.1 | NA | |||||||||||
| CmwrCosIndex | 1.3.6.1.4.1.7262.4.5.9.1.1.5.1.1 | INTEGER | NA | ||||||||||
column · INTEGER · not-accessible · current A unique name identifying each enet port in port isolation mode or the bridgeMode index when system is configured in bridge mode.
| |||||||||||||
| CmwrCos0 | 1.3.6.1.4.1.7262.4.5.9.1.1.5.1.2 | QueueType | RW | ||||||||||
column · QueueType · read-write · current User queue assignments for CoS0. There are 8 CoS queues. Their corresponding queue numbers are 1 to 8 where 1 is the lowest priority queue and 8 is the highest priority queue. | |||||||||||||
| CmwrCos1 | 1.3.6.1.4.1.7262.4.5.9.1.1.5.1.3 | QueueType | RW | ||||||||||
column · QueueType · read-write · current User queue assignments for CoS1. There are 8 CoS queues. Their corresponding queue numbers are 1 to 8 where 1 is the lowest priority queue and 8 is the highest priority queue. | |||||||||||||
| CmwrCos2 | 1.3.6.1.4.1.7262.4.5.9.1.1.5.1.4 | QueueType | RW | ||||||||||
column · QueueType · read-write · current User queue assignments for CoS2. There are 8 CoS queues. Their corresponding queue numbers are 1 to 8 where 1 is the lowest priority queue and 8 is the highest priority queue. | |||||||||||||
| CmwrCos3 | 1.3.6.1.4.1.7262.4.5.9.1.1.5.1.5 | QueueType | RW | ||||||||||
column · QueueType · read-write · current User queue assignments for CoS3. There are 8 CoS queues. Their corresponding queue numbers are 1 to 8 where 1 is the lowest priority queue and 8 is the highest priority queue. | |||||||||||||
| CmwrCos4 | 1.3.6.1.4.1.7262.4.5.9.1.1.5.1.6 | QueueType | RW | ||||||||||
column · QueueType · read-write · current User queue assignments for CoS4. There are 8 CoS queues. Their corresponding queue numbers are 1 to 8 where 1 is the lowest priority queue and 8 is the highest priority queue. | |||||||||||||
| CmwrCos5 | 1.3.6.1.4.1.7262.4.5.9.1.1.5.1.7 | QueueType | RW | ||||||||||
column · QueueType · read-write · current User queue assignments for CoS5. There are 8 CoS queues. Their corresponding queue numbers are 1 to 8 where 1 is the lowest priority queue and 8 is the highest priority queue. | |||||||||||||
| CmwrCos6 | 1.3.6.1.4.1.7262.4.5.9.1.1.5.1.8 | QueueType | RW | ||||||||||
column · QueueType · read-write · current User queue assignments for CoS6. There are 8 CoS queues. Their corresponding queue numbers are 1 to 8 where 1 is the lowest priority queue and 8 is the highest priority queue. | |||||||||||||
| CmwrCos7 | 1.3.6.1.4.1.7262.4.5.9.1.1.5.1.9 | QueueType | RW | ||||||||||
column · QueueType · read-write · current User queue assignments for CoS7. There are 8 CoS queues. Their corresponding queue numbers are 1 to 8 where 1 is the lowest priority queue and 8 is the highest priority queue. | |||||||||||||
| CmwrCosRowStatus | 1.3.6.1.4.1.7262.4.5.9.1.1.5.1.10 | RowStatus | RW | ||||||||||
column · RowStatus · read-write · current Row status for CoS queue mapping. This object is used to apply all CoS settings simultaneously. | |||||||||||||
| TmwrCosDefValueTable | 1.3.6.1.4.1.7262.4.5.9.1.1.6 | NA | |||||||||||
table · not-accessible · current A table containing the CoS default value, the configuration corresponds to the egress QoS of radio port. | |||||||||||||
| RmwrCosDefValueEntry | 1.3.6.1.4.1.7262.4.5.9.1.1.6.1 | NA | |||||||||||
row · not-accessible · current A table entry containing the CoS default value.
| |||||||||||||
| CmwrCosDefValueIndex | 1.3.6.1.4.1.7262.4.5.9.1.1.6.1.1 | INTEGER | NA | ||||||||||
column · INTEGER · not-accessible · current Specifies CoS default value for each port in port isolation or in bridge mode.
| |||||||||||||
| CmwrCosDefValue | 1.3.6.1.4.1.7262.4.5.9.1.1.6.1.2 | Integer32 | RW | ||||||||||
column · Integer32 · read-write · current Specifies CoS default value for each port in port isolation or in bridge mode. | |||||||||||||
| TmwrCirQTable | 1.3.6.1.4.1.7262.4.5.9.1.1.7 | NA | |||||||||||
table · not-accessible · current A table containing the CIR value for each queue, the configuration corresponds to the egress QoS of radio port. | |||||||||||||
| RmwrCirQEntry | 1.3.6.1.4.1.7262.4.5.9.1.1.7.1 | NA | |||||||||||
row · not-accessible · current A table entry containing the CIR value for each radio queue.
| |||||||||||||
| CmwrCirQIndex | 1.3.6.1.4.1.7262.4.5.9.1.1.7.1.1 | QueueType | NA | ||||||||||
column · QueueType · not-accessible · current Specifies CIR queue index for each radio queue. | |||||||||||||
| CmwrCirQ1 | 1.3.6.1.4.1.7262.4.5.9.1.1.7.1.2 | Integer32 | RW | ||||||||||
column · Integer32 · read-write · current User CIR setting for queue 1. | |||||||||||||
| CmwrCirQ2 | 1.3.6.1.4.1.7262.4.5.9.1.1.7.1.3 | Integer32 | RW | ||||||||||
column · Integer32 · read-write · current User CIR setting for queue 2. | |||||||||||||
| CmwrCirQ3 | 1.3.6.1.4.1.7262.4.5.9.1.1.7.1.4 | Integer32 | RW | ||||||||||
column · Integer32 · read-write · current User CIR setting for queue 3. | |||||||||||||
| CmwrCirQ4 | 1.3.6.1.4.1.7262.4.5.9.1.1.7.1.5 | Integer32 | RW | ||||||||||
column · Integer32 · read-write · current User CIR setting for queue 4. | |||||||||||||
| CmwrCirQ5 | 1.3.6.1.4.1.7262.4.5.9.1.1.7.1.6 | Integer32 | RW | ||||||||||
column · Integer32 · read-write · current User CIR setting for queue 5. | |||||||||||||
| CmwrCirQ6 | 1.3.6.1.4.1.7262.4.5.9.1.1.7.1.7 | Integer32 | RW | ||||||||||
column · Integer32 · read-write · current User CIR setting for queue 6. | |||||||||||||
| CmwrCirQ7 | 1.3.6.1.4.1.7262.4.5.9.1.1.7.1.8 | Integer32 | RW | ||||||||||
column · Integer32 · read-write · current User CIR setting for queue 7. | |||||||||||||
| CmwrCirQ8 | 1.3.6.1.4.1.7262.4.5.9.1.1.7.1.9 | Integer32 | RW | ||||||||||
column · Integer32 · read-write · current User CIR setting for queue 8. | |||||||||||||
| CmwrCirQRowStatus | 1.3.6.1.4.1.7262.4.5.9.1.1.7.1.10 | RowStatus | RW | ||||||||||
column · RowStatus · read-write · current The CIR table Row status. This object is used to apply all queue CIR settings simultaneously. | |||||||||||||
| TmwrCbsQTable | 1.3.6.1.4.1.7262.4.5.9.1.1.8 | NA | |||||||||||
table · not-accessible · current A table containing CBS settings for each queue, the configuration corresponds to the egress QoS of radio port. | |||||||||||||
| RmwrCbsQEntry | 1.3.6.1.4.1.7262.4.5.9.1.1.8.1 | NA | |||||||||||
row · not-accessible · current A table entry containing CBS settings for each queue.
| |||||||||||||
| CmwrCbsQIndex | 1.3.6.1.4.1.7262.4.5.9.1.1.8.1.1 | QueueType | NA | ||||||||||
column · QueueType · not-accessible · current Specifies CBS queue index for each radio queue. | |||||||||||||
| CmwrCbsQ1 | 1.3.6.1.4.1.7262.4.5.9.1.1.8.1.2 | Integer32 | RW | ||||||||||
column · Integer32 · read-write · current User CBS setting for queue 1. | |||||||||||||
| CmwrCbsQ2 | 1.3.6.1.4.1.7262.4.5.9.1.1.8.1.3 | Integer32 | RW | ||||||||||
column · Integer32 · read-write · current User CBS setting for queue 2. | |||||||||||||
| CmwrCbsQ3 | 1.3.6.1.4.1.7262.4.5.9.1.1.8.1.4 | Integer32 | RW | ||||||||||
column · Integer32 · read-write · current User CBS setting for queue 3. | |||||||||||||
| CmwrCbsQ4 | 1.3.6.1.4.1.7262.4.5.9.1.1.8.1.5 | Integer32 | RW | ||||||||||
column · Integer32 · read-write · current User CBS setting for queue 4. | |||||||||||||
| CmwrCbsQ5 | 1.3.6.1.4.1.7262.4.5.9.1.1.8.1.6 | Integer32 | RW | ||||||||||
column · Integer32 · read-write · current User CBS setting for queue 5. | |||||||||||||
| CmwrCbsQ6 | 1.3.6.1.4.1.7262.4.5.9.1.1.8.1.7 | Integer32 | RW | ||||||||||
column · Integer32 · read-write · current User CBS setting for queue 6. | |||||||||||||
| CmwrCbsQ7 | 1.3.6.1.4.1.7262.4.5.9.1.1.8.1.8 | Integer32 | RW | ||||||||||
column · Integer32 · read-write · current User CBS setting for queue 7. | |||||||||||||
| CmwrCbsQ8 | 1.3.6.1.4.1.7262.4.5.9.1.1.8.1.9 | Integer32 | RW | ||||||||||
column · Integer32 · read-write · current User CBS setting for queue 8. | |||||||||||||
| CmwrCbsQRowStatus | 1.3.6.1.4.1.7262.4.5.9.1.1.8.1.10 | RowStatus | RW | ||||||||||
column · RowStatus · read-write · current The CBS table Row status. This object is used to apply all queue CBS settings simultaneously. | |||||||||||||
| TmwrWeightQTable | 1.3.6.1.4.1.7262.4.5.9.1.1.9 | NA | |||||||||||
table · not-accessible · current A table containing queue weight setting for each queue, the configuration corresponds to the egress QoS of radio port. | |||||||||||||
| RmwrWeightQEntry | 1.3.6.1.4.1.7262.4.5.9.1.1.9.1 | NA | |||||||||||
row · not-accessible · current A table entry containing queue weight setting for each queue.
| |||||||||||||
| CmwrWeightQIndex | 1.3.6.1.4.1.7262.4.5.9.1.1.9.1.1 | QueueType | NA | ||||||||||
column · QueueType · not-accessible · current Specifies queue weight index for each radio queue. | |||||||||||||
| CmwrWeightQ1 | 1.3.6.1.4.1.7262.4.5.9.1.1.9.1.2 | Integer32 | RW | ||||||||||
column · Integer32 · read-write · current Specifies queue weight value for queue 1. | |||||||||||||
| CmwrWeightQ2 | 1.3.6.1.4.1.7262.4.5.9.1.1.9.1.3 | Integer32 | RW | ||||||||||
column · Integer32 · read-write · current Specifies queue weight value for queue 2. | |||||||||||||
| CmwrWeightQ3 | 1.3.6.1.4.1.7262.4.5.9.1.1.9.1.4 | Integer32 | RW | ||||||||||
column · Integer32 · read-write · current Specifies queue weight value for queue 3. | |||||||||||||
| CmwrWeightQ4 | 1.3.6.1.4.1.7262.4.5.9.1.1.9.1.5 | Integer32 | RW | ||||||||||
column · Integer32 · read-write · current Specifies queue weight value for queue 4. | |||||||||||||
| CmwrWeightQ5 | 1.3.6.1.4.1.7262.4.5.9.1.1.9.1.6 | Integer32 | RW | ||||||||||
column · Integer32 · read-write · current Specifies queue weight value for queue 5. | |||||||||||||
| CmwrWeightQ6 | 1.3.6.1.4.1.7262.4.5.9.1.1.9.1.7 | Integer32 | RW | ||||||||||
column · Integer32 · read-write · current Specifies queue weight value for queue 6. | |||||||||||||
| CmwrWeightQ7 | 1.3.6.1.4.1.7262.4.5.9.1.1.9.1.8 | Integer32 | RW | ||||||||||
column · Integer32 · read-write · current Specifies queue weight value for queue 7. | |||||||||||||
| CmwrWeightQ8 | 1.3.6.1.4.1.7262.4.5.9.1.1.9.1.9 | Integer32 | RW | ||||||||||
column · Integer32 · read-write · current Specifies queue weight value for queue 8. | |||||||||||||
| CmwrWeightQRowStatus | 1.3.6.1.4.1.7262.4.5.9.1.1.9.1.10 | RowStatus | RW | ||||||||||
column · RowStatus · read-write · current The queue weight table Row status. This object is used to apply all queue weight settings simultaneously. | |||||||||||||
| TmwrQbsQTable | 1.3.6.1.4.1.7262.4.5.9.1.1.10 | NA | |||||||||||
table · not-accessible · current A table containing queue buffer size, the configuration corresponds to the egress QoS of radio port. | |||||||||||||
| RmwrQbsQEntry | 1.3.6.1.4.1.7262.4.5.9.1.1.10.1 | NA | |||||||||||
| CmwrQbsQIndex | 1.3.6.1.4.1.7262.4.5.9.1.1.10.1.1 | QueueType | NA | ||||||||||
column · QueueType · not-accessible · current Specifies QBS queue index for each radio queue. | |||||||||||||
| CmwrQbsQ1 | 1.3.6.1.4.1.7262.4.5.9.1.1.10.1.2 | Integer32 | RW | ||||||||||
column · Integer32 · read-write · current Specifies queue buffer size (QBS) for queue 1. | |||||||||||||
| CmwrQbsQ2 | 1.3.6.1.4.1.7262.4.5.9.1.1.10.1.3 | Integer32 | RW | ||||||||||
column · Integer32 · read-write · current Specifies queue buffer size (QBS) for queue 2. | |||||||||||||
| CmwrQbsQ3 | 1.3.6.1.4.1.7262.4.5.9.1.1.10.1.4 | Integer32 | RW | ||||||||||
column · Integer32 · read-write · current Specifies queue buffer size (QBS) for queue 3. | |||||||||||||
| CmwrQbsQ4 | 1.3.6.1.4.1.7262.4.5.9.1.1.10.1.5 | Integer32 | RW | ||||||||||
column · Integer32 · read-write · current Specifies queue buffer size (QBS) for queue 4. | |||||||||||||
| CmwrQbsQ5 | 1.3.6.1.4.1.7262.4.5.9.1.1.10.1.6 | Integer32 | RW | ||||||||||
column · Integer32 · read-write · current Specifies queue buffer size (QBS) for queue 5. | |||||||||||||
| CmwrQbsQ6 | 1.3.6.1.4.1.7262.4.5.9.1.1.10.1.7 | Integer32 | RW | ||||||||||
column · Integer32 · read-write · current Specifies queue buffer size (QBS) for queue 6. | |||||||||||||
| CmwrQbsQ7 | 1.3.6.1.4.1.7262.4.5.9.1.1.10.1.8 | Integer32 | RW | ||||||||||
column · Integer32 · read-write · current Specifies queue buffer size (QBS) for queue 7. | |||||||||||||
| CmwrQbsQ8 | 1.3.6.1.4.1.7262.4.5.9.1.1.10.1.9 | Integer32 | RW | ||||||||||
column · Integer32 · read-write · current Specifies queue buffer size (QBS) for queue 8. | |||||||||||||
| CmwrQbsQRowStatus | 1.3.6.1.4.1.7262.4.5.9.1.1.10.1.10 | RowStatus | RW | ||||||||||
column · RowStatus · read-write · current The queue buffer size (QBS) table Row status. This object is used to apply all queue QBS settings simultaneously. | |||||||||||||
| TmwrPolicyQTable | 1.3.6.1.4.1.7262.4.5.9.1.1.11 | NA | |||||||||||
table · not-accessible · current A table containing queue policy for each queue, the configuration corresponds to the egress QoS of radio port. | |||||||||||||
| RmwrPolicyQEntry | 1.3.6.1.4.1.7262.4.5.9.1.1.11.1 | NA | |||||||||||
row · not-accessible · current A table entry containing queue policy for each queue.
| |||||||||||||
| CmwrPolicyQIndex | 1.3.6.1.4.1.7262.4.5.9.1.1.11.1.1 | QueueType | NA | ||||||||||
column · QueueType · not-accessible · current Specifies queue policy index for each radio queue. | |||||||||||||
| CmwrPolicyQ1 | 1.3.6.1.4.1.7262.4.5.9.1.1.11.1.2 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current User queue policy value for queue 1.
| |||||||||||||
| CmwrPolicyQ2 | 1.3.6.1.4.1.7262.4.5.9.1.1.11.1.3 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current User queue policy value for queue 2.
| |||||||||||||
| CmwrPolicyQ3 | 1.3.6.1.4.1.7262.4.5.9.1.1.11.1.4 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current User queue policy value for queue 3.
| |||||||||||||
| CmwrPolicyQ4 | 1.3.6.1.4.1.7262.4.5.9.1.1.11.1.5 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current User queue policy value for queue 4.
| |||||||||||||
| CmwrPolicyQ5 | 1.3.6.1.4.1.7262.4.5.9.1.1.11.1.6 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current User queue policy value for queue 5.
| |||||||||||||
| CmwrPolicyQ6 | 1.3.6.1.4.1.7262.4.5.9.1.1.11.1.7 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current User queue policy value for queue 6.
| |||||||||||||
| CmwrPolicyQ7 | 1.3.6.1.4.1.7262.4.5.9.1.1.11.1.8 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current User queue policy value for queue 7.
| |||||||||||||
| CmwrPolicyQ8 | 1.3.6.1.4.1.7262.4.5.9.1.1.11.1.9 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current User queue policy value for queue 8.
| |||||||||||||
| CmwrPolicyQRowStatus | 1.3.6.1.4.1.7262.4.5.9.1.1.11.1.10 | RowStatus | RW | ||||||||||
column · RowStatus · read-write · current The queue policy table Row status. This object is used to apply all queue policy settings simultaneously. | |||||||||||||
| TmwrUserClassTable | 1.3.6.1.4.1.7262.4.5.9.1.1.12 | NA | |||||||||||
table · not-accessible · current A table containing QOS user class settings, the configuration corresponds to the egress QoS of radio port. | |||||||||||||
| RmwrUserClassEntry | 1.3.6.1.4.1.7262.4.5.9.1.1.12.1 | NA | |||||||||||
row · not-accessible · current A table entry containing QOS user class settings.
| |||||||||||||
| CmwrUserClassIndex | 1.3.6.1.4.1.7262.4.5.9.1.1.12.1.1 | ClassType | NA | ||||||||||
column · ClassType · not-accessible · current Specifies user class queue index for each radio queue. | |||||||||||||
| CmwrUserClassOffset | 1.3.6.1.4.1.7262.4.5.9.1.1.12.1.2 | Integer32 | RW | ||||||||||
column · Integer32 · read-write · current Specifies user class offset value. | |||||||||||||
| CmwrUserClassValue | 1.3.6.1.4.1.7262.4.5.9.1.1.12.1.3 | DisplayString | RW | ||||||||||
column · DisplayString · read-write · current Specifies user class value. | |||||||||||||
| CmwrUserClassMask | 1.3.6.1.4.1.7262.4.5.9.1.1.12.1.4 | DisplayString | RW | ||||||||||
column · DisplayString · read-write · current Specifies user class mask. | |||||||||||||
| TmwrUserFlowTable | 1.3.6.1.4.1.7262.4.5.9.1.1.13 | NA | |||||||||||
table · not-accessible · current A table containing QOS user flow settings, the configuration corresponds to the egress QoS of radio port. | |||||||||||||
| RmwrUserFlowEntry | 1.3.6.1.4.1.7262.4.5.9.1.1.13.1 | NA | |||||||||||
| CmwrUserFlowIndex | 1.3.6.1.4.1.7262.4.5.9.1.1.13.1.1 | FlowType | NA | ||||||||||
column · FlowType · not-accessible · current Specifies user flow filter queue index for each queue. | |||||||||||||
| CmwrUserFlowFilter | 1.3.6.1.4.1.7262.4.5.9.1.1.13.1.2 | DisplayString | RW | ||||||||||
column · DisplayString · read-write · current Specifies user flow filter value for each queue. | |||||||||||||
| TmwrUserFlowMappingTable | 1.3.6.1.4.1.7262.4.5.9.1.1.14 | NA | |||||||||||
table · not-accessible · current A table containing QOS user flow mapping settings in port isolation mode. | |||||||||||||
| RmwrUserFlowMappingEntry | 1.3.6.1.4.1.7262.4.5.9.1.1.14.1 | NA | |||||||||||
row · not-accessible · current A table entry containing QOS user flow mapping settings in port isolation mode. | |||||||||||||
| CmwrUserFlowMappingIndex | 1.3.6.1.4.1.7262.4.5.9.1.1.14.1.1 | FlowType | NA | ||||||||||
column · FlowType · not-accessible · current Specifies user flow mapping index for each flow in port isolation mode. | |||||||||||||
| CmwrUserFlowMappingState | 1.3.6.1.4.1.7262.4.5.9.1.1.14.1.2 | EnableType | RW | ||||||||||
column · EnableType · read-write · current Enables or disabled user flow mapping for a specific flow in port isolation mode. | |||||||||||||
| CmwrUserFlowMapping1Q | 1.3.6.1.4.1.7262.4.5.9.1.1.14.1.3 | QueueType | RW | ||||||||||
column · QueueType · read-write · current Specifies the selected queue for gi01 in port isolation mode. | |||||||||||||
| CmwrUserFlowMapping2Q | 1.3.6.1.4.1.7262.4.5.9.1.1.14.1.4 | QueueType | RW | ||||||||||
column · QueueType · read-write · current Specifies the selected queue for gi02 in port isolation mode. | |||||||||||||
| CmwrUserFlowMapping3Q | 1.3.6.1.4.1.7262.4.5.9.1.1.14.1.5 | QueueType | RW | ||||||||||
column · QueueType · read-write · current Specifies the selected queue for gi03 in port isolation mode. | |||||||||||||
| CmwrUserFlowMapping4Q | 1.3.6.1.4.1.7262.4.5.9.1.1.14.1.6 | QueueType | RW | ||||||||||
column · QueueType · read-write · current Specifies the selected queue for gi04 in port isolation mode. | |||||||||||||
| CmwrUserFlowMappingRowStatus | 1.3.6.1.4.1.7262.4.5.9.1.1.14.1.7 | RowStatus | RW | ||||||||||
column · RowStatus · read-write · current Row status for user flow mapping in port isolation mode. | |||||||||||||
| TmwrUserFlowMappingBridgeModeTable | 1.3.6.1.4.1.7262.4.5.9.1.1.15 | NA | |||||||||||
table · not-accessible · current A table containing QOS user flow mapping settings in bridge mode, the configuration corresponds to the egress QoS of radio port. | |||||||||||||
| RmwrUserFlowMappingBridgeModeEntry | 1.3.6.1.4.1.7262.4.5.9.1.1.15.1 | NA | |||||||||||
row · not-accessible · current A table entry containing QOS user flow mapping settings in bridge mode. | |||||||||||||
| CmwrUserFlowMappingBridgeModeIndex | 1.3.6.1.4.1.7262.4.5.9.1.1.15.1.1 | FlowType | NA | ||||||||||
column · FlowType · not-accessible · current Specifies user flow mapping index for each flow in bridge mode. | |||||||||||||
| CmwrUserFlowMappingBridgeModeState | 1.3.6.1.4.1.7262.4.5.9.1.1.15.1.2 | EnableType | RW | ||||||||||
column · EnableType · read-write · current Enables or disabled user flow mapping for a specific flow in bridge mode. | |||||||||||||
| CmwrUserFlowMappingBridgeModeQ | 1.3.6.1.4.1.7262.4.5.9.1.1.15.1.3 | QueueType | RW | ||||||||||
column · QueueType · read-write · current Specifies the selected user flow mapping queue in bridge mode. | |||||||||||||
| CmwrUserFlowMappingBridgeModeRowStatus | 1.3.6.1.4.1.7262.4.5.9.1.1.15.1.4 | RowStatus | RW | ||||||||||
column · RowStatus · read-write · current Row status for user flow mapping in bridge mode. | |||||||||||||
| NmwrEthThresholdAlarm | 1.3.6.1.4.1.7262.4.5.9.1.2 | ||||||||||||
| TmwrPortThresholdAlarmTable | 1.3.6.1.4.1.7262.4.5.9.1.2.1 | NA | |||||||||||
table · not-accessible · current A table containing threshold alarms parameters. | |||||||||||||
| RmwrPortThresholdAlarmEntry | 1.3.6.1.4.1.7262.4.5.9.1.2.1.1 | NA | |||||||||||
row · not-accessible · current A table entry containing threshold alarms parameters. | |||||||||||||
| CmwrPortThresholdAlarmIndex | 1.3.6.1.4.1.7262.4.5.9.1.2.1.1.1 | Integer32 | NA | ||||||||||
column · Integer32 · not-accessible · current Index to Threshold alarm table. Instance 1 indicates Radio port. | |||||||||||||
| CmwrDroppedPktsThresholdParams | 1.3.6.1.4.1.7262.4.5.9.1.2.1.1.2 | DisplayString (SIZE (0..24)) | RW | ||||||||||
column · DisplayString (SIZE (0..24)) · read-write · current This object configures the dropped packets threshold settings. The threshold, in percent and the number of seconds that it must exceed this threshold. An example of the format of the string is as follows: '70 10'. The first parameter is the percentage of packets that are dropped, the second is the time in seconds that the threshold must be exceeded. The single quote marks i.e. ' ' are not used in the command. | |||||||||||||
| CmwrOutBWUtilizationThresholdParams | 1.3.6.1.4.1.7262.4.5.9.1.2.1.1.3 | DisplayString | RW | ||||||||||
column · DisplayString · read-write · current This object configures the BW utilization threshold settings. The threshold, in percent and the number of seconds that it must exceed this threshold. An example of the format of the string is as follows: '70 10'. The first parameter is the percentage of BW threshold, the second is the time in seconds that the threshold must be exceeded. The single quote marks i.e. ' ' are not used in the command | |||||||||||||
| CmwrThroughputThresholdParams | 1.3.6.1.4.1.7262.4.5.9.1.2.1.1.4 | DisplayString | RW | ||||||||||
column · DisplayString · read-write · current This object configures the radio throughput threshold settings. The threshold, in percent and the number of seconds that it must exceed this threshold. An example of the format of the string is as follows: '70 10'. The first parameter is the percentage of the throughput, the second is the time in seconds that the threshold must be exceeded. The single quote marks i.e. ' ' are not used in the command | |||||||||||||
| TmwrRadioQThresholdAlarmTable | 1.3.6.1.4.1.7262.4.5.9.1.2.2 | NA | |||||||||||
table · not-accessible · current A table of radio port queue based Threshold Alarm settings, the configuration corresponds to the egress QoS of radio port. | |||||||||||||
| RmwrRadioQThresholdAlarmEntry | 1.3.6.1.4.1.7262.4.5.9.1.2.2.1 | NA | |||||||||||
row · not-accessible · current A table entry of queue based Threshold Alarm settings. | |||||||||||||
| CmwrRadioQThresholdAlarmIndex | 1.3.6.1.4.1.7262.4.5.9.1.2.2.1.1 | QueueType | RO | ||||||||||
column · QueueType · read-only · current A unique identifier for one of the 8 queues | |||||||||||||
| CmwrRadioQDepthThresholdParams | 1.3.6.1.4.1.7262.4.5.9.1.2.2.1.2 | DisplayString | RW | ||||||||||
column · DisplayString · read-write · current The threshold, in percent, and the number of seconds that it must exceed this threshold are programmed by the user. An example of the format of the string is as follows: '70 10'. The first parameter is the percentage of queue depth, the second is the time in seconds that the threshold must be exceeded. | |||||||||||||
| CmwrRadioQDroppedPktsThresholdParams | 1.3.6.1.4.1.7262.4.5.9.1.2.2.1.3 | DisplayString | RW | ||||||||||
column · DisplayString · read-write · current The threshold, in packets, and the number of seconds that it must exceed this threshold are programmed by the user. An example of the format of the string is as follows: '70 10'. The first parameter is the number of packets that are dropped, the second is the time in seconds that the threshold must be exceeded. | |||||||||||||
| NmwrEthernetStatus | 1.3.6.1.4.1.7262.4.5.9.2 | ||||||||||||
| NmwrEthernetPerformance | 1.3.6.1.4.1.7262.4.5.9.3 | ||||||||||||
| TmwrEnetPerfPortStatsTable | 1.3.6.1.4.1.7262.4.5.9.3.1 | NA | |||||||||||
table · not-accessible · current A table containing Ethernet port statistics. | |||||||||||||
| RmwrEnetPerfPortStatsEntry | 1.3.6.1.4.1.7262.4.5.9.3.1.1 | NA | |||||||||||
row · not-accessible · current A table entry containing Ethernet port statistics. | |||||||||||||
| CmwrEnetPortStatsIndex | 1.3.6.1.4.1.7262.4.5.9.3.1.1.1 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current A table index to Ethernet ports.
| |||||||||||||
| CmwrPortStatsInOctet | 1.3.6.1.4.1.7262.4.5.9.3.1.1.2 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current A 64-bit counter representing the incoming octets. | |||||||||||||
| CmwrPortStatsInGoodPkts | 1.3.6.1.4.1.7262.4.5.9.3.1.1.3 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current A 64-bit counter representing the incoming good packets. | |||||||||||||
| CmwrPortStatsInErrPkts | 1.3.6.1.4.1.7262.4.5.9.3.1.1.4 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current A 64-bit counter representing the incoming error packets. | |||||||||||||
| CmwrPortStatsInDiscardPkts | 1.3.6.1.4.1.7262.4.5.9.3.1.1.5 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current A 64-bit counter representing the incoming discarded packets. | |||||||||||||
| CmwrPortStatsOutOctets | 1.3.6.1.4.1.7262.4.5.9.3.1.1.6 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current A 64-bit counter representing the outgoing octets. | |||||||||||||
| CmwrPortStatsOutGoodPkts | 1.3.6.1.4.1.7262.4.5.9.3.1.1.7 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current A 64-bit counter representing the outgoing good packets. | |||||||||||||
| CmwrPortStatsOutErrPkts | 1.3.6.1.4.1.7262.4.5.9.3.1.1.8 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current A 64-bit counter representing the outgoing error packets. | |||||||||||||
| CmwrPortStatsOutDiscardPkts | 1.3.6.1.4.1.7262.4.5.9.3.1.1.9 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current A 64-bit counter representing the outgoing discarded packets. | |||||||||||||
| CmwrPortStatsOutBwUtilization | 1.3.6.1.4.1.7262.4.5.9.3.1.1.10 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current This object represents the ratio of egress data rate and the egress link capacity of the port. The value is represented in %.
| |||||||||||||
| CmwrPortStatsInBwUtilization | 1.3.6.1.4.1.7262.4.5.9.3.1.1.11 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current This object represents the ratio of ingress data rate and the ingress link capacity of the port. The value is represented in %.
| |||||||||||||
| CmwrPortStatsInDataRate | 1.3.6.1.4.1.7262.4.5.9.3.1.1.12 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current The Ethernet data rate coming into the port. The data rate is multiplied by 100. e.g. A display of 1530 is actually 15.30 Mpbs
| |||||||||||||
| CmwrPortStatsThroughput | 1.3.6.1.4.1.7262.4.5.9.3.1.1.13 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current The Ethernet data rate going out of the port. The data rate is multiplied by 100. e.g. A display of 1530 is actually 15.30 Mpbs.
| |||||||||||||
| TmwrEnetPerfPortStats32BitTable | 1.3.6.1.4.1.7262.4.5.9.3.2 | NA | |||||||||||
table · not-accessible · current A table containing 32-bit Ethernet statistics. This table is provided to satisfy snmp v1 users where they can't access 64-bit counters. | |||||||||||||
| RmwrEnetPerfPortStats32BitEntry | 1.3.6.1.4.1.7262.4.5.9.3.2.1 | NA | |||||||||||
row · not-accessible · current A table entry containing 32-bit Ethernet statistics. This table is provided to satisfy snmp v1 users where they can't access 64-bit counters. | |||||||||||||
| CmwrPortStats32BitIndex | 1.3.6.1.4.1.7262.4.5.9.3.2.1.1 | INTEGER | NA | ||||||||||
column · INTEGER · not-accessible · current A table index to ports carrying Ethernet packets.
| |||||||||||||
| CmwrPortStatsInOctet32Bit | 1.3.6.1.4.1.7262.4.5.9.3.2.1.2 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current A 32-bit counter representing the incoming octets. | |||||||||||||
| CmwrPortStatsInGoodPkts32Bit | 1.3.6.1.4.1.7262.4.5.9.3.2.1.3 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current A 32-bit counter representing the incoming good packets. | |||||||||||||
| CmwrPortStatsInErrPkts32Bit | 1.3.6.1.4.1.7262.4.5.9.3.2.1.4 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current A 32-bit counter representing the incoming error packets. | |||||||||||||
| CmwrPortStatsInDiscardPkts32Bit | 1.3.6.1.4.1.7262.4.5.9.3.2.1.5 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current A 32-bit counter representing the incoming discarded packets. | |||||||||||||
| CmwrPortStatsOutOctets32Bit | 1.3.6.1.4.1.7262.4.5.9.3.2.1.6 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current A 32-bit counter representing the outgoing octets. | |||||||||||||
| CmwrPortStatsOutGoodPkts32Bit | 1.3.6.1.4.1.7262.4.5.9.3.2.1.7 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current A 32-bit counter representing the outgoing good packets. | |||||||||||||
| CmwrPortStatsOutErrPkts32Bit | 1.3.6.1.4.1.7262.4.5.9.3.2.1.8 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current A 32-bit counter representing the outgoing error packets. | |||||||||||||
| CmwrPortStatsOutDiscardPkts32Bit | 1.3.6.1.4.1.7262.4.5.9.3.2.1.9 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current A 32-bit counter representing the outgoing discarded packets. | |||||||||||||
| TmwrEnetPerfRadioQStatsTable | 1.3.6.1.4.1.7262.4.5.9.3.3 | NA | |||||||||||
table · not-accessible · current A table containing radio queue statistics. | |||||||||||||
| RmwrEnetPerfRadioQStatsEntry | 1.3.6.1.4.1.7262.4.5.9.3.3.1 | NA | |||||||||||
row · not-accessible · current A table entry containing radio queue statistics.
| |||||||||||||
| CmwrRadioQStatsIndex | 1.3.6.1.4.1.7262.4.5.9.3.3.1.1 | QueueType | NA | ||||||||||
column · QueueType · not-accessible · current A unique value for each of the 8 queues. | |||||||||||||
| CmwrRadioQStatsInGoodPkts | 1.3.6.1.4.1.7262.4.5.9.3.3.1.2 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current The current count of packets in queues. | |||||||||||||
| CmwrRadioQStatsInDiscardPkts | 1.3.6.1.4.1.7262.4.5.9.3.3.1.3 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current The current count of packets received in queues that were discarded due to queue overflow. | |||||||||||||
| CmwrRadioQStatsOutBwUtilization | 1.3.6.1.4.1.7262.4.5.9.3.3.1.4 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current The ratio of egress data rate and user configured radio queue CIR.
| |||||||||||||
| CmwrRadioQStatsInDataRate | 1.3.6.1.4.1.7262.4.5.9.3.3.1.5 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current The ingress data rate of the radio queue.
| |||||||||||||
| CmwrRadioQStatsThroughput | 1.3.6.1.4.1.7262.4.5.9.3.3.1.6 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current The throughput of the radio queue.
| |||||||||||||
| TmwrEnetPerfRadioQStats32BitTable | 1.3.6.1.4.1.7262.4.5.9.3.4 | NA | |||||||||||
table · not-accessible · current A table containing 32-bit counters for radio queue statistics. | |||||||||||||
| RmwrEnetPerfRadioQStats32BitEntry | 1.3.6.1.4.1.7262.4.5.9.3.4.1 | NA | |||||||||||
row · not-accessible · current A table entry containing 32-bit counters for radio queue statistics. | |||||||||||||
| CmwrRadioQStats32BitIndex | 1.3.6.1.4.1.7262.4.5.9.3.4.1.1 | QueueType | NA | ||||||||||
column · QueueType · not-accessible · current A unique value for each of the 8 queues. | |||||||||||||
| CmwrRadioQStatsInGoodPkts32Bit | 1.3.6.1.4.1.7262.4.5.9.3.4.1.2 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current A 32-bit counter representing the current count of packets in queues. | |||||||||||||
| CmwrRadioQStatsDiscardPkts32Bit | 1.3.6.1.4.1.7262.4.5.9.3.4.1.3 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current A 32-bit counter representing the current count of packets received in queues that were discarded due to queue overflow . | |||||||||||||
| NmwrEthernetNotifications | 1.3.6.1.4.1.7262.4.5.9.4 | ||||||||||||
| !mwrDroppedPktsThreshold | 1.3.6.1.4.1.7262.4.5.9.4.1 | ||||||||||||
notification · current This notification is raised when the ethernet packet drops in an interface has exceeded user set limit. | |||||||||||||
| !mwrRadioQDroppedPktsThreshold | 1.3.6.1.4.1.7262.4.5.9.4.2 | ||||||||||||
notification · current This notification is raised when Ethernet packet drops over radio traffic queue has exceeded the user configured limit. The mwrRadioQThresholdAlarmIndex varbind indicates specific queue number. | |||||||||||||
| !mwrRadioQDepthThreshold | 1.3.6.1.4.1.7262.4.5.9.4.3 | ||||||||||||
notification · current This notification is raised when the data buffered in the specific radio traffic queue has exceeded the user set limit. The mwrRadioQThresholdAlarmIndex varbind indicates specific queue number. | |||||||||||||
| !mwrOutBWUtilizationThreshold | 1.3.6.1.4.1.7262.4.5.9.4.4 | ||||||||||||
notification · current This notification is raised when the out bandwidth utilization of an interface has exceeded the user configured limit. | |||||||||||||
| !mwrThroughputThreshold | 1.3.6.1.4.1.7262.4.5.9.4.5 | ||||||||||||
notification · current This notification is raised when the throughput of an interface has exceeded the user configured limit. | |||||||||||||
| NmwrAcm | 1.3.6.1.4.1.7262.4.5.10 | ||||||||||||
| NmwrAcmConfigurations | 1.3.6.1.4.1.7262.4.5.10.1 | ||||||||||||
| SmwrAcmManualMode | 1.3.6.1.4.1.7262.4.5.10.1.1 | EnableType | RW | ||||||||||
scalar · EnableType · read-write · current Enables or disables the Adaptive Coding Modulation (ACM) Manual Mode. | |||||||||||||
| SmwrAcmState | 1.3.6.1.4.1.7262.4.5.10.1.2 | EnableType | RW | ||||||||||
scalar · EnableType · read-write · current Enables or disables the Adaptive Code Modulation (ACM). | |||||||||||||
| SmwrAcmWaitToRestore | 1.3.6.1.4.1.7262.4.5.10.1.3 | Integer32 | RW | ||||||||||
scalar · Integer32 · read-write · current This object configures the ACM wait to restore duration time in seconds. | |||||||||||||
| TmwrAcmModeTable | 1.3.6.1.4.1.7262.4.5.10.1.4 | NA | |||||||||||
table · not-accessible · current A table containing available Adaptive Code Modulation (ACM) tx profiles. | |||||||||||||
| RmwrAcmModeEntry | 1.3.6.1.4.1.7262.4.5.10.1.4.1 | NA | |||||||||||
row · not-accessible · current A table entry containing available Adaptive Code Modulation (ACM) tx profiles.
| |||||||||||||
| CmwrAcmModeIndex | 1.3.6.1.4.1.7262.4.5.10.1.4.1.1 | Integer32 | NA | ||||||||||
column · Integer32 · not-accessible · current A unique value for each Adaptive Code Modulation (ACM) tx profile. | |||||||||||||
| CmwrAcmTxProfileName | 1.3.6.1.4.1.7262.4.5.10.1.4.1.2 | DisplayString | RO | ||||||||||
column · DisplayString · read-only · current The Adaptive Code Modulation (ACM) tx profile name. | |||||||||||||
| CmwrAcmTxProfileRange | 1.3.6.1.4.1.7262.4.5.10.1.4.1.3 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Specifies the range for the Adaptive Code Modulation (ACM) TX Profile.
| |||||||||||||
| NmwrAcmStatus | 1.3.6.1.4.1.7262.4.5.10.2 | ||||||||||||
| TmwrAcmStatusTable | 1.3.6.1.4.1.7262.4.5.10.2.1 | NA | |||||||||||
table · not-accessible · current A table containing Adaptive Code Modulation (ACM) status. | |||||||||||||
| RmwrAcmStatusEntry | 1.3.6.1.4.1.7262.4.5.10.2.1.1 | NA | |||||||||||
row · not-accessible · current A table entry containing Adaptive Code Modulation (ACM) status.
| |||||||||||||
| CmwrAcmStatusIndex | 1.3.6.1.4.1.7262.4.5.10.2.1.1.1 | RadioInstanceType | NA | ||||||||||
column · RadioInstanceType · not-accessible · current A unique value for each interface. | |||||||||||||
| CmwrAcmActualTxProfile | 1.3.6.1.4.1.7262.4.5.10.2.1.1.2 | DisplayString (SIZE (0..24)) | RO | ||||||||||
column · DisplayString (SIZE (0..24)) · read-only · current A read-only string specifying the currently running ACM TX profile. | |||||||||||||
| NmwrAcmDiagnostics | 1.3.6.1.4.1.7262.4.5.10.3 | ||||||||||||
| TmwrAcmDiagTable | 1.3.6.1.4.1.7262.4.5.10.3.1 | NA | |||||||||||
table · not-accessible · current A table containing ACM diagnostic settings. | |||||||||||||
| RmwrAcmDiagEntry | 1.3.6.1.4.1.7262.4.5.10.3.1.1 | NA | |||||||||||
| CmwrAcmDiagIndex | 1.3.6.1.4.1.7262.4.5.10.3.1.1.1 | RadioInstanceType | NA | ||||||||||
column · RadioInstanceType · not-accessible · current A unique value for each radio channel if applicable. | |||||||||||||
| CmwrAcmDiagnose | 1.3.6.1.4.1.7262.4.5.10.3.1.1.2 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current This service effecting object accepts either 'up' or 'down' to diagnose whether the modulation speed can be increased or decreased. Poll the mwrAcmDiagnosticResult object to determine the results.
| |||||||||||||
| CmwrAcmDiagnosticResult | 1.3.6.1.4.1.7262.4.5.10.3.1.1.3 | DisplayString | RO | ||||||||||
column · DisplayString · read-only · current The result from ACM Diagnostic is read from this object. | |||||||||||||
| NmwrAcmNotifications | 1.3.6.1.4.1.7262.4.5.10.4 | ||||||||||||
| !mwrAcmConfigMismatch | 1.3.6.1.4.1.7262.4.5.10.4.1 | ||||||||||||
notification · current This notification is raised when ACM configuration mismatch between the link partners. | |||||||||||||
| !mwrAcmProfileLowered | 1.3.6.1.4.1.7262.4.5.10.4.2 | ||||||||||||
notification · current This notification is raised when system is executing ACM and working at a lower radio profile than the configured nominal radio profile. | |||||||||||||
| !mwrAcmProfileChanged | 1.3.6.1.4.1.7262.4.5.10.4.3 | ||||||||||||
notification · current This notification is raised when system is executing in ACM and has changed the radio profile. | |||||||||||||
| NmwrAtpc | 1.3.6.1.4.1.7262.4.5.11 | ||||||||||||
| NmwrAtpcConfigurations | 1.3.6.1.4.1.7262.4.5.11.1 | ||||||||||||
| TmwrAtpcConfigurationsTable | 1.3.6.1.4.1.7262.4.5.11.1.1 | NA | |||||||||||
table · not-accessible · current Table containing ATPC configurations. | |||||||||||||
| RmwrAtpcConfigurationsEntry | 1.3.6.1.4.1.7262.4.5.11.1.1.1 | NA | |||||||||||
| CmwrAtpcConfigIndex | 1.3.6.1.4.1.7262.4.5.11.1.1.1.1 | RadioInstanceType | NA | ||||||||||
column · RadioInstanceType · not-accessible · current A unique value for each of the radio channel instance. | |||||||||||||
| CmwrAtpcState | 1.3.6.1.4.1.7262.4.5.11.1.1.1.2 | EnableType | RW | ||||||||||
column · EnableType · read-write · current Indicates whether the Adaptive Transmit Power Control (ATPC) feature is enabled. | |||||||||||||
| CmwrAtpcCoordinatedPower | 1.3.6.1.4.1.7262.4.5.11.1.1.1.3 | Integer32 | RW | ||||||||||
column · Integer32 · read-write · current This object is the value at which the system will transmit if the ATPC and the coordinated power are enabled. This is only if the system is transmitting the maximum power for 5 minutes. The value is multiplied by 10. e.g. A display of 133 is actually 13.3 dB.
| |||||||||||||
| CmwrAtpcCoordinatedPowerEnable | 1.3.6.1.4.1.7262.4.5.11.1.1.1.4 | EnableType | RW | ||||||||||
column · EnableType · read-write · current Indicates whether Adaptive Transmit Power Control (ATPC) coordinated power option is enabled. | |||||||||||||
| CmwrAtpcMinTxPower | 1.3.6.1.4.1.7262.4.5.11.1.1.1.5 | Integer32 | RW | ||||||||||
column · Integer32 · read-write · current Sets the minimum ATPC transmit power in dB x 10.
| |||||||||||||
| CmwrAtpcMaxTxPower | 1.3.6.1.4.1.7262.4.5.11.1.1.1.6 | Integer32 | RW | ||||||||||
column · Integer32 · read-write · current Sets the maximum ATPC transmit power in dB x 10. When ATPC is enabled, transmit power range will be between ATPC min. and ATPC max. power.
| |||||||||||||
| CmwrAtpcRslTarget | 1.3.6.1.4.1.7262.4.5.11.1.1.1.7 | Integer32 | RW | ||||||||||
column · Integer32 · read-write · current This object configures Received Signal Level that should be maintained by the link by adjusting the transmit power when ATPC is enabled. | |||||||||||||
| CmwrAtpcRslTargetUseDefault | 1.3.6.1.4.1.7262.4.5.11.1.1.1.8 | EnableType | RW | ||||||||||
column · EnableType · read-write · current When this object is enabled the default RSL target will be used instead of the configured mwrAtpcRslTarget. The mwrAtpcDefaultRslTarget displays the default value. | |||||||||||||
| NmwrAtpcStatus | 1.3.6.1.4.1.7262.4.5.11.2 | ||||||||||||
| TmwrAtpcStatusTable | 1.3.6.1.4.1.7262.4.5.11.2.1 | NA | |||||||||||
table · not-accessible · current A table containing ATPC status. | |||||||||||||
| RmwrAtpcStatusEntry | 1.3.6.1.4.1.7262.4.5.11.2.1.1 | NA | |||||||||||
| CmwrAtpcStatusIndex | 1.3.6.1.4.1.7262.4.5.11.2.1.1.1 | RadioInstanceType | NA | ||||||||||
column · RadioInstanceType · not-accessible · current A unique value for each of the radio instance. | |||||||||||||
| CmwrAtpcRunningStatus | 1.3.6.1.4.1.7262.4.5.11.2.1.1.2 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current Indicates the actual condition of ATPC: - disabled: Configuration is set to off. - disabledAuto: Feature was automatically disabled and is transmitting at coordinated power. - running: Feature is running normally. - runningToggling: Feature is toggling between maximum and minimum power to recover from a loss of mod sync. - suspended: Feature was suspended. - suspendedLostComm: Feature is suspended because communication is lost with peer ATPC. - suspendedRadioDown: Feature is suspended because the radio is down. - suspendedRadioMuted: Feature is suspended because the radio is muted. - suspendedRadioLoopback: Feature is suspended because the radio is in loopback mode.
| |||||||||||||
| CmwrAtpcDefaultRslTarget | 1.3.6.1.4.1.7262.4.5.11.2.1.1.3 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current This object is the default value of the Received Signal Level target when ATPC is enabled. | |||||||||||||
| CmwrAtpcActualMinTxPower | 1.3.6.1.4.1.7262.4.5.11.2.1.1.4 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current This object indicates the running configuration for ATPC min tx power. | |||||||||||||
| CmwrAtpcActualMaxTxPower | 1.3.6.1.4.1.7262.4.5.11.2.1.1.5 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current This object indicates the running configuration for ATPC max tx power. | |||||||||||||
| CmwrAtpcActualCoordinatedPower | 1.3.6.1.4.1.7262.4.5.11.2.1.1.6 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current This value is the running configuration of the coordinated power. The value is multiplied by 10. e.g. A display of 133 is actually 13.3 dB. | |||||||||||||
| CmwrAtpcPeerRslTarget | 1.3.6.1.4.1.7262.4.5.11.2.1.1.7 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current This object is the peer Received Signal Level target when ATPC is enabled. | |||||||||||||
| CmwrAtpcMinRslTarget | 1.3.6.1.4.1.7262.4.5.11.2.1.1.8 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current Represents the minimum RSL target value. | |||||||||||||
| CmwrAtpcMaxRslTarget | 1.3.6.1.4.1.7262.4.5.11.2.1.1.9 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current Represents the maximum RSL target value. | |||||||||||||
| CmwrAtpcPeerRsl | 1.3.6.1.4.1.7262.4.5.11.2.1.1.10 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current This object represents the peer actual RSL value. Divide the value by 10 to get the actual RSL value. Once this number is divided by 10 the units are dB. For example -352 is actually -35.2dB | |||||||||||||
| NmwrAtpcNotifications | 1.3.6.1.4.1.7262.4.5.11.3 | ||||||||||||
| !mwrAtpcConfigMismatch | 1.3.6.1.4.1.7262.4.5.11.3.1 | ||||||||||||
notification · current This notification is raised when ATPC configuration mismatch has occurred between link partners. | |||||||||||||
| !mwrAtpcAutoDisabled | 1.3.6.1.4.1.7262.4.5.11.3.2 | ||||||||||||
notification · current This notification is raised when ATPC is automatically disabled due to coordinated power condition. When this notification is raised the radio will be transmitting at coordinated power. The mwrAtpcStatusIndex varbind indicates the radio instance. | |||||||||||||
| NmwrRadio | 1.3.6.1.4.1.7262.4.5.12 | ||||||||||||
| NmwrCompression | 1.3.6.1.4.1.7262.4.5.13 | ||||||||||||
| NmwrCompressionConfigurations | 1.3.6.1.4.1.7262.4.5.13.1 | ||||||||||||
| SmwrBacRecordAvgPeriod | 1.3.6.1.4.1.7262.4.5.13.1.1 | Integer32 | RW | ||||||||||
scalar · Integer32 · read-write · current Configures the average period used for computing the running average BAC gain and uncompressed ratio. Default average period is set to 10 seconds. | |||||||||||||
| TmwrBacTable | 1.3.6.1.4.1.7262.4.5.13.1.2 | NA | |||||||||||
table · not-accessible · current Table containing Bandwidth Acceleration entries. | |||||||||||||
| RmwrBacEntry | 1.3.6.1.4.1.7262.4.5.13.1.2.1 | NA | |||||||||||
| CmwrBacQIndex | 1.3.6.1.4.1.7262.4.5.13.1.2.1.1 | QueueType | NA | ||||||||||
column · QueueType · not-accessible · current A unique value for each of the 8 radio egress Queues. | |||||||||||||
| CmwrBacQEnable | 1.3.6.1.4.1.7262.4.5.13.1.2.1.2 | EnableType | RW | ||||||||||
column · EnableType · read-write · current Configure queue compression state to disable/enable. | |||||||||||||
| CmwrBacQBlockSize | 1.3.6.1.4.1.7262.4.5.13.1.2.1.3 | Integer32 | RW | ||||||||||
column · Integer32 · read-write · current Configure queue compression block size (256...8000). Block size has to be in increments of 64 bytes. Otherwise it will be rounded off to nearest 64 bytes. Valid block sizes are <256 512 1024 4032 8000> | |||||||||||||
| CmwrBacRecordLogging | 1.3.6.1.4.1.7262.4.5.13.1.2.1.4 | EnableType | RW | ||||||||||
column · EnableType · read-write · current Enables/disables logging of BAC related statistics like Maximum BAC gain and Maximum uncompressed ratio on a per queue basis to syslog and flashlog. | |||||||||||||
| TmwrHcQTable | 1.3.6.1.4.1.7262.4.5.13.1.3 | NA | |||||||||||
table · not-accessible · current A table containing Header Compression settings for each queue, the configuration corresponds to the egress QoS of radio port. | |||||||||||||
| RmwrHcQEntry | 1.3.6.1.4.1.7262.4.5.13.1.3.1 | NA | |||||||||||
row · not-accessible · current A table entry containing Header Compression settings for each queue.
| |||||||||||||
| CmwrHcQIndex | 1.3.6.1.4.1.7262.4.5.13.1.3.1.1 | QueueType | NA | ||||||||||
column · QueueType · not-accessible · current Specifies Header Compression queue index for each radio queue. | |||||||||||||
| CmwrHcQ1 | 1.3.6.1.4.1.7262.4.5.13.1.3.1.2 | EnableType | RW | ||||||||||
column · EnableType · read-write · current Enables or disables the Header Compression on queue 1. | |||||||||||||
| CmwrHcQ2 | 1.3.6.1.4.1.7262.4.5.13.1.3.1.3 | EnableType | RW | ||||||||||
column · EnableType · read-write · current Enables or disables the Header Compression on queue 2. | |||||||||||||
| CmwrHcQ3 | 1.3.6.1.4.1.7262.4.5.13.1.3.1.4 | EnableType | RW | ||||||||||
column · EnableType · read-write · current Enables or disables the Header Compression on queue 3. | |||||||||||||
| CmwrHcQ4 | 1.3.6.1.4.1.7262.4.5.13.1.3.1.5 | EnableType | RW | ||||||||||
column · EnableType · read-write · current Enables or disables the Header Compression on queue 4. | |||||||||||||
| CmwrHcQ5 | 1.3.6.1.4.1.7262.4.5.13.1.3.1.6 | EnableType | RW | ||||||||||
column · EnableType · read-write · current Enables or disables the Header Compression on queue 5. | |||||||||||||
| CmwrHcQ6 | 1.3.6.1.4.1.7262.4.5.13.1.3.1.7 | EnableType | RW | ||||||||||
column · EnableType · read-write · current Enables or disables the Header Compression on queue 6. | |||||||||||||
| CmwrHcQ7 | 1.3.6.1.4.1.7262.4.5.13.1.3.1.8 | EnableType | RW | ||||||||||
column · EnableType · read-write · current Enables or disables the Header Compression on queue 7. | |||||||||||||
| CmwrHcQ8 | 1.3.6.1.4.1.7262.4.5.13.1.3.1.9 | EnableType | RW | ||||||||||
column · EnableType · read-write · current Enables or disables the Header Compression on queue 8. | |||||||||||||
| CmwrHcQRowStatus | 1.3.6.1.4.1.7262.4.5.13.1.3.1.10 | RowStatus | RW | ||||||||||
column · RowStatus · read-write · current The Header Compression table Row Status. This object is used to apply Header Compression settings for all queues simultaneously. | |||||||||||||
| NmwrCompressionStatus | 1.3.6.1.4.1.7262.4.5.13.2 | ||||||||||||
| TmwrBacStatusTable | 1.3.6.1.4.1.7262.4.5.13.2.1 | NA | |||||||||||
table · not-accessible · current Table containing Bandwidth Acceleration status entries. | |||||||||||||
| RmwrBacStatusEntry | 1.3.6.1.4.1.7262.4.5.13.2.1.1 | NA | |||||||||||
row · not-accessible · current Contains Bandwidth Acceleration status entries.
| |||||||||||||
| CmwrBacStatusQIndex | 1.3.6.1.4.1.7262.4.5.13.2.1.1.1 | QueueType | NA | ||||||||||
column · QueueType · not-accessible · current A unique value for each of the 8 Queues. | |||||||||||||
| CmwrBacUncompressedRatio | 1.3.6.1.4.1.7262.4.5.13.2.1.1.2 | DisplayString | RO | ||||||||||
column · DisplayString · read-only · current Running average Uncompressed ratio is calculated by collecting n samples of bytes uncompressed and bytes in to queue over specified average period in percentage. | |||||||||||||
| CmwrBacGain | 1.3.6.1.4.1.7262.4.5.13.2.1.1.3 | DisplayString | RO | ||||||||||
column · DisplayString · read-only · current The Running Average BAC gain is the sum of all bytes getting into the compressor divided by the sum of all compressed and uncompressed bytes calculated over an average period. | |||||||||||||
| NmwrCompressionNotifications | 1.3.6.1.4.1.7262.4.5.13.3 | ||||||||||||
| NmwrEvents | 1.3.6.1.4.1.7262.4.5.14 | ||||||||||||
| NmwrEventsConfigurations | 1.3.6.1.4.1.7262.4.5.14.1 | ||||||||||||
| TmwrEventConfigTable | 1.3.6.1.4.1.7262.4.5.14.1.1 | NA | |||||||||||
table · not-accessible · current A table of alarm configuration | |||||||||||||
| RmwrEventConfigEntry | 1.3.6.1.4.1.7262.4.5.14.1.1.1 | NA | |||||||||||
row · not-accessible · current An entry of alarm configuration | |||||||||||||
| CmwrEventConfigIndex | 1.3.6.1.4.1.7262.4.5.14.1.1.1.1 | Unsigned32 | NA | ||||||||||
column · Unsigned32 · not-accessible · current A unique value for each alarm. | |||||||||||||
| CmwrEventInstanceIndex | 1.3.6.1.4.1.7262.4.5.14.1.1.1.2 | Unsigned32 | RO | ||||||||||
column · Unsigned32 · read-only · current A unique value for each instance of an alarm. | |||||||||||||
| CmwrEventConfigSeverity | 1.3.6.1.4.1.7262.4.5.14.1.1.1.3 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current The severity of the alarm as minor, major or critical.
| |||||||||||||
| CmwrEventName | 1.3.6.1.4.1.7262.4.5.14.1.1.1.4 | DisplayString | RO | ||||||||||
column · DisplayString · read-only · current Represents the event name. | |||||||||||||
| CmwrAlarmConfigState | 1.3.6.1.4.1.7262.4.5.14.1.1.1.5 | EnableType | RW | ||||||||||
column · EnableType · read-write · current The state of the alarm which can be either enabled or disabled. | |||||||||||||
| CmwrTrapConfigState | 1.3.6.1.4.1.7262.4.5.14.1.1.1.6 | EnableType | RW | ||||||||||
column · EnableType · read-write · current The state of the trap which can be either enabled or disabled. | |||||||||||||
| CmwrLogEventState | 1.3.6.1.4.1.7262.4.5.14.1.1.1.7 | EnableType | RW | ||||||||||
column · EnableType · read-write · current This object is used to enable or disable logging the events. | |||||||||||||
| NmwrLogs | 1.3.6.1.4.1.7262.4.5.15 | ||||||||||||
| NmwrLogsConfigurations | 1.3.6.1.4.1.7262.4.5.15.1 | ||||||||||||
| SmwrEventLogEnable | 1.3.6.1.4.1.7262.4.5.15.1.1 | EnableType | RW | ||||||||||
scalar · EnableType · read-write · current Indicates whether event log is enabled. | |||||||||||||
| SmwrPerfmLogEnable | 1.3.6.1.4.1.7262.4.5.15.1.2 | EnableType | RW | ||||||||||
scalar · EnableType · read-write · current Indicates whether performance log is enabled. | |||||||||||||
| SmwrPerfmLogInterval | 1.3.6.1.4.1.7262.4.5.15.1.3 | DisplayString (SIZE (0..10)) | RW | ||||||||||
scalar · DisplayString (SIZE (0..10)) · read-write · current Performance statistics are logged periodically by this interval. The interval can be up to 00:15:00 (15 minutes) and as short as 00:00:1 (1 seconds). | |||||||||||||
| TmwrSysLogServerTable | 1.3.6.1.4.1.7262.4.5.15.1.4 | NA | |||||||||||
table · not-accessible · current The syslog server table. | |||||||||||||
| RmwrSysLogServerEntry | 1.3.6.1.4.1.7262.4.5.15.1.4.1 | NA | |||||||||||
| CmwrSysLogServerIndex | 1.3.6.1.4.1.7262.4.5.15.1.4.1.1 | Integer32 (1..5) | NA | ||||||||||
column · Integer32 (1..5) · not-accessible · current The syslog server table index. | |||||||||||||
| CmwrSysLogEnable | 1.3.6.1.4.1.7262.4.5.15.1.4.1.2 | EnableType | RW | ||||||||||
column · EnableType · read-write · current Indicates whether sys log is enabled. | |||||||||||||
| CmwrSysLogHostDomain | 1.3.6.1.4.1.7262.4.5.15.1.4.1.3 | InetAddressType | RW | ||||||||||
column · InetAddressType · read-write · current Indicates sys log host inet address type. Valid types are ipv4 or ipv6. | |||||||||||||
| CmwrSysLogHostAddress | 1.3.6.1.4.1.7262.4.5.15.1.4.1.4 | InetAddress | RW | ||||||||||
column · InetAddress · read-write · current Indicates sys log host inet address octet string. | |||||||||||||
| NmwrPM | 1.3.6.1.4.1.7262.4.5.16 | ||||||||||||
| NmwrPMConfigurations | 1.3.6.1.4.1.7262.4.5.16.1 | ||||||||||||
| TmwrPmRspiThresholdTable | 1.3.6.1.4.1.7262.4.5.16.1.1 | NA | |||||||||||
table · not-accessible · current Performance Monitoring table for Radio Synchronous Physical Interface thresholds. | |||||||||||||
| RmwrPmRspiThresholdEntry | 1.3.6.1.4.1.7262.4.5.16.1.1.1 | NA | |||||||||||
row · not-accessible · current Contains entries for Radio Synchronous Physical Interface thresholds.
| |||||||||||||
| CmwrPmRspiThrIndex | 1.3.6.1.4.1.7262.4.5.16.1.1.1.1 | RadioInstanceType | NA | ||||||||||
column · RadioInstanceType · not-accessible · current Index to PM RSPI Threshold table. | |||||||||||||
| CmwrPmRLT1 | 1.3.6.1.4.1.7262.4.5.16.1.1.1.2 | Integer32 | RW | ||||||||||
column · Integer32 · read-write · current Receive Level Threshold 1, represents the value of the first received power level threshold. | |||||||||||||
| CmwrPmRLT2 | 1.3.6.1.4.1.7262.4.5.16.1.1.1.3 | Integer32 | RW | ||||||||||
column · Integer32 · read-write · current Receive Level Threshold 2, represents the value of the second received power level threshold. | |||||||||||||
| CmwrPmRLT3 | 1.3.6.1.4.1.7262.4.5.16.1.1.1.4 | Integer32 | RW | ||||||||||
column · Integer32 · read-write · current Receive Level Threshold 3, represents the value of the third received power level threshold. | |||||||||||||
| CmwrPmRLT4 | 1.3.6.1.4.1.7262.4.5.16.1.1.1.5 | Integer32 | RW | ||||||||||
column · Integer32 · read-write · current Receive Level Threshold 4, represents the value of the fourth received power level threshold. | |||||||||||||
| CmwrPmTLT1 | 1.3.6.1.4.1.7262.4.5.16.1.1.1.6 | Integer32 | RW | ||||||||||
column · Integer32 · read-write · current Transmit Level Threshold 1, represents the value of the first transmitted power level threshold. | |||||||||||||
| CmwrPmTLT2 | 1.3.6.1.4.1.7262.4.5.16.1.1.1.7 | Integer32 | RW | ||||||||||
column · Integer32 · read-write · current Transmit Level Threshold 2, represents the value of the second transmitted power level threshold. | |||||||||||||
| CmwrPmRspiThrRowStatus | 1.3.6.1.4.1.7262.4.5.16.1.1.1.8 | RowStatus | RW | ||||||||||
column · RowStatus · read-write · current This object is used for applying all RSPI thresholds simultaneously. Set RowStatus to NotInService, make changes to all or some threshold values and then change RowStatus back to Active. | |||||||||||||
| TmwrPmBwThresholdTable | 1.3.6.1.4.1.7262.4.5.16.1.2 | NA | |||||||||||
table · not-accessible · current Performance monitoring out bandwidth utilization thresholds table. | |||||||||||||
| RmwrPmBwThresholdEntry | 1.3.6.1.4.1.7262.4.5.16.1.2.1 | NA | |||||||||||
row · not-accessible · current Contains entries for performance monitoring out bandwidth utilization thresholds.
| |||||||||||||
| CmwrPmBWThrIndex | 1.3.6.1.4.1.7262.4.5.16.1.2.1.1 | Integer32 | NA | ||||||||||
column · Integer32 · not-accessible · current Index to PM out BW Threshold table. Index 1 represents the radio port. | |||||||||||||
| CmwrPmBWT1 | 1.3.6.1.4.1.7262.4.5.16.1.2.1.2 | Integer32 | RW | ||||||||||
column · Integer32 · read-write · current The performance monitoring out BW utilization threshold 1. | |||||||||||||
| CmwrPmBWT2 | 1.3.6.1.4.1.7262.4.5.16.1.2.1.3 | Integer32 | RW | ||||||||||
column · Integer32 · read-write · current The performance monitoring out BW utilization threshold 2. | |||||||||||||
| CmwrPmBWT3 | 1.3.6.1.4.1.7262.4.5.16.1.2.1.4 | Integer32 | RW | ||||||||||
column · Integer32 · read-write · current The performance monitoring out BW utilization threshold 3. | |||||||||||||
| CmwrPmBWT4 | 1.3.6.1.4.1.7262.4.5.16.1.2.1.5 | Integer32 | RW | ||||||||||
column · Integer32 · read-write · current The performance monitoring out BW utilization threshold 4. | |||||||||||||
| CmwrPmBWT5 | 1.3.6.1.4.1.7262.4.5.16.1.2.1.6 | Integer32 | RW | ||||||||||
column · Integer32 · read-write · current The performance monitoring out BW utilization threshold 5. | |||||||||||||
| CmwrPmBWT6 | 1.3.6.1.4.1.7262.4.5.16.1.2.1.7 | Integer32 | RW | ||||||||||
column · Integer32 · read-write · current The performance monitoring out BW utilization threshold 6. | |||||||||||||
| CmwrPmBWT7 | 1.3.6.1.4.1.7262.4.5.16.1.2.1.8 | Integer32 | RW | ||||||||||
column · Integer32 · read-write · current The performance monitoring out BW utilization threshold 7. | |||||||||||||
| CmwrPmBWT8 | 1.3.6.1.4.1.7262.4.5.16.1.2.1.9 | Integer32 | RW | ||||||||||
column · Integer32 · read-write · current The performance monitoring out BW utilization threshold 8. | |||||||||||||
| CmwrPmBWT9 | 1.3.6.1.4.1.7262.4.5.16.1.2.1.10 | Integer32 | RW | ||||||||||
column · Integer32 · read-write · current The performance monitoring out BW utilization threshold 9. | |||||||||||||
| CmwrPmBWT10 | 1.3.6.1.4.1.7262.4.5.16.1.2.1.11 | Integer32 | RW | ||||||||||
column · Integer32 · read-write · current The performance monitoring out BW utilization threshold 10. | |||||||||||||
| CmwrPmBWTRowStatus | 1.3.6.1.4.1.7262.4.5.16.1.2.1.12 | RowStatus | RW | ||||||||||
column · RowStatus · read-write · current This object is used for applying all PM bandwidth threshold settings simultaneously. Set RowStatus to NotInService, make changes to all or some threshold values and then change RowStatus back to Active. | |||||||||||||
| TmwrPmTpThresholdTable | 1.3.6.1.4.1.7262.4.5.16.1.3 | NA | |||||||||||
table · not-accessible · current Performance monitoring throughput thresholds table. | |||||||||||||
| RmwrPmTpThresholdEntry | 1.3.6.1.4.1.7262.4.5.16.1.3.1 | NA | |||||||||||
row · not-accessible · current Contains entries for performance monitoring throughput thresholds.
| |||||||||||||
| CmwrPmTPThrIndex | 1.3.6.1.4.1.7262.4.5.16.1.3.1.1 | Integer32 | NA | ||||||||||
column · Integer32 · not-accessible · current Index to PM throughput Threshold table. Index 1 represents the radio port. | |||||||||||||
| CmwrPmTPT1 | 1.3.6.1.4.1.7262.4.5.16.1.3.1.2 | Integer32 | RW | ||||||||||
column · Integer32 · read-write · current The performance monitoring throughput threshold 1. | |||||||||||||
| CmwrPmTPT2 | 1.3.6.1.4.1.7262.4.5.16.1.3.1.3 | Integer32 | RW | ||||||||||
column · Integer32 · read-write · current The performance monitoring throughput threshold 2. | |||||||||||||
| CmwrPmTPT3 | 1.3.6.1.4.1.7262.4.5.16.1.3.1.4 | Integer32 | RW | ||||||||||
column · Integer32 · read-write · current The performance monitoring throughput threshold 3. | |||||||||||||
| CmwrPmTPT4 | 1.3.6.1.4.1.7262.4.5.16.1.3.1.5 | Integer32 | RW | ||||||||||
column · Integer32 · read-write · current The performance monitoring throughput threshold 4. | |||||||||||||
| CmwrPmTPT5 | 1.3.6.1.4.1.7262.4.5.16.1.3.1.6 | Integer32 | RW | ||||||||||
column · Integer32 · read-write · current The performance monitoring throughput threshold 5. | |||||||||||||
| CmwrPmTPT6 | 1.3.6.1.4.1.7262.4.5.16.1.3.1.7 | Integer32 | RW | ||||||||||
column · Integer32 · read-write · current The performance monitoring throughput threshold 6. | |||||||||||||
| CmwrPmTPT7 | 1.3.6.1.4.1.7262.4.5.16.1.3.1.8 | Integer32 | RW | ||||||||||
column · Integer32 · read-write · current The performance monitoring throughput threshold 7. | |||||||||||||
| CmwrPmTPT8 | 1.3.6.1.4.1.7262.4.5.16.1.3.1.9 | Integer32 | RW | ||||||||||
column · Integer32 · read-write · current The performance monitoring throughput threshold 8. | |||||||||||||
| CmwrPmTPT9 | 1.3.6.1.4.1.7262.4.5.16.1.3.1.10 | Integer32 | RW | ||||||||||
column · Integer32 · read-write · current The performance monitoring throughput threshold 9. | |||||||||||||
| CmwrPmTPT10 | 1.3.6.1.4.1.7262.4.5.16.1.3.1.11 | Integer32 | RW | ||||||||||
column · Integer32 · read-write · current The performance monitoring throughput threshold 10. | |||||||||||||
| CmwrPmTPTRowStatus | 1.3.6.1.4.1.7262.4.5.16.1.3.1.12 | RowStatus | RW | ||||||||||
column · RowStatus · read-write · current This object is used for applying all PM throughput threshold settings simultaneously. Set RowStatus to NotInService, make changes to all or some threshold values and then change RowStatus back to Active. | |||||||||||||
| TmwrPmAdvThresholdTable | 1.3.6.1.4.1.7262.4.5.16.1.4 | NA | |||||||||||
table · not-accessible · current The advanced performance monitoring thresholds table. | |||||||||||||
| RmwrPmAdvThresholdEntry | 1.3.6.1.4.1.7262.4.5.16.1.4.1 | NA | |||||||||||
row · not-accessible · current The advanced performance monitoring thresholds entries.
| |||||||||||||
| CmwrPmAdvThrIndex | 1.3.6.1.4.1.7262.4.5.16.1.4.1.1 | Integer32 | NA | ||||||||||
column · Integer32 · not-accessible · current The advanced performance monitoring thresholds table index. Index 1 represents the radio port. | |||||||||||||
| CmwrPmAdvTxHitsT1 | 1.3.6.1.4.1.7262.4.5.16.1.4.1.2 | Integer32 | RW | ||||||||||
column · Integer32 · read-write · current The advanced performance monitoring Tx hits threshold 1. | |||||||||||||
| CmwrPmAdvRxHitsT1 | 1.3.6.1.4.1.7262.4.5.16.1.4.1.3 | Integer32 | RW | ||||||||||
column · Integer32 · read-write · current The advanced performance monitoring Rx hits threshold 1. | |||||||||||||
| CmwrPmAdvRowStatus | 1.3.6.1.4.1.7262.4.5.16.1.4.1.4 | RowStatus | RW | ||||||||||
column · RowStatus · read-write · current This object is used for applying all PM advanced threshold settings simultaneously. Set RowStatus to NotInService, make changes to all threshold values and then change back RowStatus to Active. | |||||||||||||
| NmwrPMStatus | 1.3.6.1.4.1.7262.4.5.16.2 | ||||||||||||
| TmwrPmRspiTable | 1.3.6.1.4.1.7262.4.5.16.2.1 | NA | |||||||||||
table · not-accessible · current Performance Monitoring table for Radio Synchronous Physical Interface. | |||||||||||||
| RmwrPmRspiEntry | 1.3.6.1.4.1.7262.4.5.16.2.1.1 | NA | |||||||||||
row · not-accessible · current Contains information for Radio Synchronous Physical Interface. The table is indexed by the granularity period and by the interval number. 22 rows are always presents, 20 are the historical measurements for 16 intervals in the quarter granularity and 4 intervals in the 24 hours granularity period. 2 rows represent the current measures. | |||||||||||||
| CmwrPmRspiStatusIndex | 1.3.6.1.4.1.7262.4.5.16.2.1.1.1 | RadioInstanceType | NA | ||||||||||
column · RadioInstanceType · not-accessible · current A unique value for each of the radio instance. | |||||||||||||
| CmwrPmRspiInterval | 1.3.6.1.4.1.7262.4.5.16.2.1.1.2 | PMIntervalType | NA | ||||||||||
column · PMIntervalType · not-accessible · current The interval period of the row. Quarter means the 15 minutes interval and day means the 24 hours interval. | |||||||||||||
| CmwrPmRspiIntervalID | 1.3.6.1.4.1.7262.4.5.16.2.1.1.3 | Integer32 (0..16) | NA | ||||||||||
column · Integer32 (0..16) · not-accessible · current The interval identifier of the row, from 1 (last quarter) to 16 (oldest quarter) for the 15-minute and from 1 (yesterday) to 4 (4 days ago) for the 24-hour. Value 0 can be used to retrieve current measurements, according to the requested granularity. | |||||||||||||
| CmwrPmRspiMeasSuspect | 1.3.6.1.4.1.7262.4.5.16.2.1.1.4 | TruthValue | RO | ||||||||||
column · TruthValue · read-only · current Any problem that invalidates the measurement. | |||||||||||||
| CmwrPmRspiMeasIntervalStatus | 1.3.6.1.4.1.7262.4.5.16.2.1.1.5 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current An indication if the interval is a valid measurement. When the system comes up, all the previous intervals are invalid.
| |||||||||||||
| CmwrPmRspiMeasTimeLength | 1.3.6.1.4.1.7262.4.5.16.2.1.1.6 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current The interval duration in seconds.
| |||||||||||||
| CmwrPmRspiMeasTLTMMin | 1.3.6.1.4.1.7262.4.5.16.2.1.1.7 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current The transmitted power level tide mark low value. | |||||||||||||
| CmwrPmRspiMeasTLTMMax | 1.3.6.1.4.1.7262.4.5.16.2.1.1.8 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current The transmitted power level tide mark high value. | |||||||||||||
| CmwrPmRspiMeasTLTS1 | 1.3.6.1.4.1.7262.4.5.16.2.1.1.9 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current The number of seconds above the first transmitted power level threshold.
| |||||||||||||
| CmwrPmRspiMeasTLTS2 | 1.3.6.1.4.1.7262.4.5.16.2.1.1.10 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current The number of seconds above the second transmitted power level threshold.
| |||||||||||||
| CmwrPmRspiMeasRLTMMin | 1.3.6.1.4.1.7262.4.5.16.2.1.1.11 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current The received power level tide mark low value. | |||||||||||||
| CmwrPmRspiMeasRLTMMax | 1.3.6.1.4.1.7262.4.5.16.2.1.1.12 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current The received power level tide mark high value. | |||||||||||||
| CmwrPmRspiMeasRLTS1 | 1.3.6.1.4.1.7262.4.5.16.2.1.1.13 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current The number of seconds below the first received power level threshold.
| |||||||||||||
| CmwrPmRspiMeasRLTS2 | 1.3.6.1.4.1.7262.4.5.16.2.1.1.14 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current The number of seconds below the second received power level threshold.
| |||||||||||||
| CmwrPmRspiMeasRLTS3 | 1.3.6.1.4.1.7262.4.5.16.2.1.1.15 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current The number of seconds below the third received power level threshold.
| |||||||||||||
| CmwrPmRspiMeasRLTS4 | 1.3.6.1.4.1.7262.4.5.16.2.1.1.16 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current The number of seconds below the fourth received power level threshold.
| |||||||||||||
| TmwrPmBWTable | 1.3.6.1.4.1.7262.4.5.16.2.2 | NA | |||||||||||
table · not-accessible · current Table containing performance monitoring measurements in 15 min and 24 hrs intervals for out BW utilization. | |||||||||||||
| RmwrPmBWEntry | 1.3.6.1.4.1.7262.4.5.16.2.2.1 | NA | |||||||||||
row · not-accessible · current Table entries containing performance monitoring measurements in 15 min and 24 hrs intervals for out BW utilization. | |||||||||||||
| CmwrPmBWStatusIndex | 1.3.6.1.4.1.7262.4.5.16.2.2.1.1 | Integer32 | NA | ||||||||||
column · Integer32 · not-accessible · current The performance monitoring out BW utilization measurements table index. Index 1 represents the radio port. | |||||||||||||
| CmwrPmBWInterval | 1.3.6.1.4.1.7262.4.5.16.2.2.1.2 | PMIntervalType | NA | ||||||||||
column · PMIntervalType · not-accessible · current The interval period of the row. Quarter means the 15 minutes interval and day means the 24 hours interval. | |||||||||||||
| CmwrPmBWIntervalID | 1.3.6.1.4.1.7262.4.5.16.2.2.1.3 | Integer32 (0..16) | NA | ||||||||||
column · Integer32 (0..16) · not-accessible · current The interval identifier of the row, from 1 (last quarter) to 16 (oldest quarter) for the 15-minute and from 1 (yesterday) to 4 (4 days ago) for the 24-hour. Value 0 can be used to retrieve current measurements, according to the requested granularity. | |||||||||||||
| CmwrPmBWMeasSuspect | 1.3.6.1.4.1.7262.4.5.16.2.2.1.4 | TruthValue | RO | ||||||||||
column · TruthValue · read-only · current Any problem that invalidates the measurement. | |||||||||||||
| CmwrPmBWMeasIntervalStatus | 1.3.6.1.4.1.7262.4.5.16.2.2.1.5 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current An indication if the interval is a valid measurement. When the system comes up, all the previous intervals are invalid.
| |||||||||||||
| CmwrPmBWMeasTimeLength | 1.3.6.1.4.1.7262.4.5.16.2.2.1.6 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current The interval duration in seconds. | |||||||||||||
| CmwrPmMeasBWTS1 | 1.3.6.1.4.1.7262.4.5.16.2.2.1.7 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current The number of seconds above the first BW utilization threshold. | |||||||||||||
| CmwrPmMeasBWTS2 | 1.3.6.1.4.1.7262.4.5.16.2.2.1.8 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current The number of seconds above the second BW utilization threshold. | |||||||||||||
| CmwrPmMeasBWTS3 | 1.3.6.1.4.1.7262.4.5.16.2.2.1.9 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current The number of seconds above the third BW utilization threshold. | |||||||||||||
| CmwrPmMeasBWTS4 | 1.3.6.1.4.1.7262.4.5.16.2.2.1.10 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current The number of seconds above the fourth BW utilization threshold. | |||||||||||||
| CmwrPmMeasBWTS5 | 1.3.6.1.4.1.7262.4.5.16.2.2.1.11 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current The number of seconds above the fifth BW utilization threshold. | |||||||||||||
| CmwrPmMeasBWTS6 | 1.3.6.1.4.1.7262.4.5.16.2.2.1.12 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current The number of seconds above the sixth BW utilization threshold. | |||||||||||||
| CmwrPmMeasBWTS7 | 1.3.6.1.4.1.7262.4.5.16.2.2.1.13 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current The number of seconds above the seventh BW utilization threshold. | |||||||||||||
| CmwrPmMeasBWTS8 | 1.3.6.1.4.1.7262.4.5.16.2.2.1.14 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current The number of seconds above the eighth BW utilization threshold. | |||||||||||||
| CmwrPmMeasBWTS9 | 1.3.6.1.4.1.7262.4.5.16.2.2.1.15 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current The number of seconds above the ninth BW utilization threshold. | |||||||||||||
| CmwrPmMeasBWTS10 | 1.3.6.1.4.1.7262.4.5.16.2.2.1.16 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current The number of seconds above the tenth BW utilization threshold. | |||||||||||||
| TmwrPmTPTable | 1.3.6.1.4.1.7262.4.5.16.2.3 | NA | |||||||||||
table · not-accessible · current Table containing performance monitoring measurements in 15 min and 24 hrs intervals for throughput. | |||||||||||||
| RmwrPmTPEntry | 1.3.6.1.4.1.7262.4.5.16.2.3.1 | NA | |||||||||||
row · not-accessible · current Table entry containing performance monitoring throughput measurements in 15 min and 24 hrs intervals. | |||||||||||||
| CmwrPmTPStatusIndex | 1.3.6.1.4.1.7262.4.5.16.2.3.1.1 | Integer32 | NA | ||||||||||
column · Integer32 · not-accessible · current The performance monitoring throughput measurements table index. Index 1 represents the radio port. | |||||||||||||
| CmwrPmTPInterval | 1.3.6.1.4.1.7262.4.5.16.2.3.1.2 | PMIntervalType | NA | ||||||||||
column · PMIntervalType · not-accessible · current The interval period of the row. Quarter means the 15 minutes interval and day means the 24 hours interval. | |||||||||||||
| CmwrPmTPIntervalID | 1.3.6.1.4.1.7262.4.5.16.2.3.1.3 | Integer32 (0..16) | NA | ||||||||||
column · Integer32 (0..16) · not-accessible · current The interval identifier of the row, from 1 (last quarter) to 16 (oldest quarter) for the 15-minute and from 1 (yesterday) to 4 (4 days ago) for the 24-hour. Value 0 can be used to retrieve current measurements, according to the requested granularity. | |||||||||||||
| CmwrPmTPMeasSuspect | 1.3.6.1.4.1.7262.4.5.16.2.3.1.4 | TruthValue | RO | ||||||||||
column · TruthValue · read-only · current Any problem that invalidates the measurement. | |||||||||||||
| CmwrPmTPMeasIntervalStatus | 1.3.6.1.4.1.7262.4.5.16.2.3.1.5 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current An indication if the interval is a valid measurement. When the system comes up, all the previous intervals are invalid.
| |||||||||||||
| CmwrPmTPMeasTimeLength | 1.3.6.1.4.1.7262.4.5.16.2.3.1.6 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current The interval duration in seconds. | |||||||||||||
| CmwrPmMeasTPTS1 | 1.3.6.1.4.1.7262.4.5.16.2.3.1.7 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current The number of seconds above the first throughput threshold. | |||||||||||||
| CmwrPmMeasTPTS2 | 1.3.6.1.4.1.7262.4.5.16.2.3.1.8 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current The number of seconds above the second throughput threshold. | |||||||||||||
| CmwrPmMeasTPTS3 | 1.3.6.1.4.1.7262.4.5.16.2.3.1.9 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current The number of seconds above the third throughput threshold. | |||||||||||||
| CmwrPmMeasTPTS4 | 1.3.6.1.4.1.7262.4.5.16.2.3.1.10 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current The number of seconds above the fourth throughput threshold. | |||||||||||||
| CmwrPmMeasTPTS5 | 1.3.6.1.4.1.7262.4.5.16.2.3.1.11 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current The number of seconds above the fifth throughput threshold. | |||||||||||||
| CmwrPmMeasTPTS6 | 1.3.6.1.4.1.7262.4.5.16.2.3.1.12 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current The number of seconds above the sixth throughput threshold. | |||||||||||||
| CmwrPmMeasTPTS7 | 1.3.6.1.4.1.7262.4.5.16.2.3.1.13 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current The number of seconds above the seventh throughput threshold. | |||||||||||||
| CmwrPmMeasTPTS8 | 1.3.6.1.4.1.7262.4.5.16.2.3.1.14 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current The number of seconds above the eighth throughput threshold. | |||||||||||||
| CmwrPmMeasTPTS9 | 1.3.6.1.4.1.7262.4.5.16.2.3.1.15 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current The number of seconds above the ninth throughput threshold. | |||||||||||||
| CmwrPmMeasTPTS10 | 1.3.6.1.4.1.7262.4.5.16.2.3.1.16 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current The number of seconds above the tenth throughput threshold. | |||||||||||||
| TmwrPmAdvTable | 1.3.6.1.4.1.7262.4.5.16.2.4 | NA | |||||||||||
table · not-accessible · current The advanced performance monitoring measurements table. | |||||||||||||
| RmwrPmAdvEntry | 1.3.6.1.4.1.7262.4.5.16.2.4.1 | NA | |||||||||||
row · not-accessible · current The advanced performance monitoring measurements table entries. | |||||||||||||
| CmwrPmAdvStatusIndex | 1.3.6.1.4.1.7262.4.5.16.2.4.1.1 | Integer32 | NA | ||||||||||
column · Integer32 · not-accessible · current The advanced performance monitoring measurements table index. Index 1 represents the radio port. | |||||||||||||
| CmwrPmAdvInterval | 1.3.6.1.4.1.7262.4.5.16.2.4.1.2 | PMIntervalType | NA | ||||||||||
column · PMIntervalType · not-accessible · current The interval period of the row. Quarter means the 15 minutes interval and day means the 24 hours interval. | |||||||||||||
| CmwrPmAdvIntervalID | 1.3.6.1.4.1.7262.4.5.16.2.4.1.3 | Integer32 (0..16) | NA | ||||||||||
column · Integer32 (0..16) · not-accessible · current The interval identifier of the row, from 1 (last quarter) to 16 (oldest quarter) for the 15-minute and from 1 (yesterday) to 4 (4 days ago) for the 24-hour. Value 0 can be used to retrieve current measurements, according to the requested granularity. | |||||||||||||
| CmwrPmAdvMeasSuspect | 1.3.6.1.4.1.7262.4.5.16.2.4.1.4 | TruthValue | RO | ||||||||||
column · TruthValue · read-only · current Any problem that invalidates the measurement. | |||||||||||||
| CmwrPmAdvMeasIntervalStatus | 1.3.6.1.4.1.7262.4.5.16.2.4.1.5 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current An indication if the interval is a valid measurement. When the system comes up, all the previous intervals are invalid.
| |||||||||||||
| CmwrPmAdvMeasTimeLength | 1.3.6.1.4.1.7262.4.5.16.2.4.1.6 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current The interval duration in seconds. | |||||||||||||
| CmwrPmAdvTxCapPeak | 1.3.6.1.4.1.7262.4.5.16.2.4.1.7 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current The number of bits per second peak transmitted capacity during the time interval. | |||||||||||||
| CmwrPmAdvTxCapRatio | 1.3.6.1.4.1.7262.4.5.16.2.4.1.8 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current The percentage of peak transmitted capacity referred to the total allowed capacity during the time interval. | |||||||||||||
| CmwrPmAdvTxCapAvg | 1.3.6.1.4.1.7262.4.5.16.2.4.1.9 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current The number of bits per second average transmitted capacity during the time interval. | |||||||||||||
| CmwrPmAdvTxCapAvgRatio | 1.3.6.1.4.1.7262.4.5.16.2.4.1.10 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current The percentage of average transmitted capacity during the time interval. | |||||||||||||
| CmwrPmAdvTxCapHits | 1.3.6.1.4.1.7262.4.5.16.2.4.1.11 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current The number of seconds where the transmitted capacity has overcome a configurable threshold during the time interval. | |||||||||||||
| CmwrPmAdvRxCapPeak | 1.3.6.1.4.1.7262.4.5.16.2.4.1.12 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current The number of bits per second peak received capacity during the time interval. | |||||||||||||
| CmwrPmAdvRxCapRatio | 1.3.6.1.4.1.7262.4.5.16.2.4.1.13 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current The percentage of peak received capacity referred to the total allowed capacity during the time interval. | |||||||||||||
| CmwrPmAdvRxCapAvg | 1.3.6.1.4.1.7262.4.5.16.2.4.1.14 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current The number of bits per second average received capacity during the time interval. | |||||||||||||
| CmwrPmAdvRxCapHits | 1.3.6.1.4.1.7262.4.5.16.2.4.1.15 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current The number of seconds where the received capacity has overcome a configurable threshold during the time interval. | |||||||||||||
| NmwrPMNotifications | 1.3.6.1.4.1.7262.4.5.16.3 | ||||||||||||
| NmwrUserMgmt | 1.3.6.1.4.1.7262.4.5.17 | ||||||||||||
| NmwrUserConfiguration | 1.3.6.1.4.1.7262.4.5.17.1 | ||||||||||||
| NmwrUserStatus | 1.3.6.1.4.1.7262.4.5.17.2 | ||||||||||||
| TmwrUserSessionTable | 1.3.6.1.4.1.7262.4.5.17.2.1 | NA | |||||||||||
table · not-accessible · current A table of user sessions | |||||||||||||
| RmwrUserSessionEntry | 1.3.6.1.4.1.7262.4.5.17.2.1.1 | NA | |||||||||||
| CmwrUserIndex | 1.3.6.1.4.1.7262.4.5.17.2.1.1.1 | INTEGER | NA | ||||||||||
column · INTEGER · not-accessible · current A unique value for each user.
| |||||||||||||
| CmwrUserName | 1.3.6.1.4.1.7262.4.5.17.2.1.1.2 | DisplayString (SIZE (0..32)) | RO | ||||||||||
column · DisplayString (SIZE (0..32)) · read-only · current The username of a management session using Telnet or HTTP. The session state variable must be checked to determine if the management session is currently in progress. | |||||||||||||
| CmwrUserConnectionType | 1.3.6.1.4.1.7262.4.5.17.2.1.1.3 | DisplayString | RO | ||||||||||
column · DisplayString · read-only · current Either telnet, ssh, http or https. Ethernet connection may be through any physical port(s) dedicated to management of the equipment. | |||||||||||||
| CmwrUserConnectionState | 1.3.6.1.4.1.7262.4.5.17.2.1.1.4 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current The state of the session. The session is inProgress if the user is currently logged into the system. The session is terminated if the user has logged out of the system.
| |||||||||||||
| NmwrUserNotifications | 1.3.6.1.4.1.7262.4.5.17.3 | ||||||||||||
| !mwrUserSession | 1.3.6.1.4.1.7262.4.5.17.3.1 | ||||||||||||
notification · current This notification is raised when a change in the state of user access is recognized, a new user has logged in or an existing user has logged out. | |||||||||||||
| !mwrUserLoginFailed | 1.3.6.1.4.1.7262.4.5.17.3.2 | ||||||||||||
notification · current This notification is raised when a user has failed to login. | |||||||||||||
| !mwrUserAccountChanged | 1.3.6.1.4.1.7262.4.5.17.3.3 | ||||||||||||
notification · current This notification is raised when a change in user account information in the system is detected. | |||||||||||||
| !mwrUserPasswordChanged | 1.3.6.1.4.1.7262.4.5.17.3.4 | ||||||||||||
notification · current This notification is raised when a user password has changed. | |||||||||||||
| ImwrModIdentity | 1.3.6.1.4.1.7262.4.5.1000 | ||||||||||||
identity This specifies the contact information and the revision tracking information for the MIB module version. | |||||||||||||
Textual conventions
ClassTypeINTEGERc1(1)c10(10)c11(11)c12(12)c13(13)c2(2)c3(3)c4(4)c5(5)c6(6)c7(7)c8(8)c9(9)The Qos class numbers from 1 to 13.
FlowTypeINTEGERflow1(1)flow10(10)flow11(11)flow12(12)flow13(13)flow2(2)flow3(3)flow4(4)flow5(5)flow6(6)flow7(7)flow8(8)flow9(9)The Qos flow numbers from 1 to 13.
PMIntervalTypeINTEGERday(2)quarter(1)The available interval period for statistical counters.
PortTypeINTEGERgi01(1)gi02(2)gi03(3)gi04(4)The list of system Ethernet ports
QueueTypeINTEGERq1(1)q2(2)q3(3)q4(4)q5(5)q6(6)q7(7)q8(8)The queue numbers from 1 to 8 where 1 is the lowest priority queue and 8 is the highest priority queue.
RadioInstanceTypeINTEGERradio1(1)The radio instance type.
Traps / Notifications
- mwrAcmConfigMismatch
1.3.6.1.4.1.7262.4.5.10.4.1 - mwrAcmProfileChanged
1.3.6.1.4.1.7262.4.5.10.4.3 - mwrAcmProfileLowered
1.3.6.1.4.1.7262.4.5.10.4.2 - mwrAtpcAutoDisabled
1.3.6.1.4.1.7262.4.5.11.3.2 - mwrAtpcConfigMismatch
1.3.6.1.4.1.7262.4.5.11.3.1 - mwrDroppedPktsThreshold
1.3.6.1.4.1.7262.4.5.9.4.1 - mwrOutBWUtilizationThreshold
1.3.6.1.4.1.7262.4.5.9.4.4 - mwrRadioQDepthThreshold
1.3.6.1.4.1.7262.4.5.9.4.3 - mwrRadioQDroppedPktsThreshold
1.3.6.1.4.1.7262.4.5.9.4.2 - mwrSntpServerUnreachable
1.3.6.1.4.1.7262.4.5.6.4.1 - mwrSynceConfigMismatch
1.3.6.1.4.1.7262.4.5.5.3.3 - mwrSynceLostLock
1.3.6.1.4.1.7262.4.5.5.3.1 - mwrSynceSecondarySourceInUse
1.3.6.1.4.1.7262.4.5.5.3.2 - mwrSysTcfInvalid
1.3.6.1.4.1.7262.4.5.2.5.1 - mwrSysTempOutOfLimit
1.3.6.1.4.1.7262.4.5.2.5.2 - mwrSystemTimeCorrected
1.3.6.1.4.1.7262.4.5.6.4.2 - mwrThroughputThreshold
1.3.6.1.4.1.7262.4.5.9.4.5 - mwrUserAccountChanged
1.3.6.1.4.1.7262.4.5.17.3.3 - mwrUserLoginFailed
1.3.6.1.4.1.7262.4.5.17.3.2 - mwrUserPasswordChanged
1.3.6.1.4.1.7262.4.5.17.3.4 - mwrUserSession
1.3.6.1.4.1.7262.4.5.17.3.1