DRAGONWAVE-HORIZON-QUANTUM-MIB
DragonWavesnmptranslate -m DRAGONWAVE-HORIZON-QUANTUM-MIB -Tpsnmpwalk -v2c -c <community> -m DRAGONWAVE-HORIZON-QUANTUM-MIB <host> 1.3.6.1.4.1.7262.2.4.1000Imports
| HORIZON-MIB | horizon |
|---|---|
| IF-MIB | ifIndex |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
| SNMPv2-SMI | Bits, Counter32, Counter64, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso |
| SNMPv2-TC | DisplayString, PhysAddress, TEXTUAL-CONVENTION |
OID tree
| Name | OID | Type | Access | Status | Example | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| NhorizonQuantum | 1.3.6.1.4.1.7262.2.4 | ||||||||||||||||||||
| NhzQtmSystem | 1.3.6.1.4.1.7262.2.4.1 | ||||||||||||||||||||
| NhzQtmSysGeneral | 1.3.6.1.4.1.7262.2.4.1.1 | ||||||||||||||||||||
| ShzQtmResetSystem | 1.3.6.1.4.1.7262.2.4.1.1.1 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current Writing '1' to this object resets the NIC, Modem, and radio.
| |||||||||||||||||||||
| ShzQtmSaveMIB | 1.3.6.1.4.1.7262.2.4.1.1.2 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current Writing '1' or 'save' to this object save all MIB values.
| |||||||||||||||||||||
| ShzQtmOperStatus | 1.3.6.1.4.1.7262.2.4.1.1.3 | INTEGER | RO | ||||||||||||||||||
scalar · INTEGER · read-only · current The current operational state of the system. Testing indicates that no operational packets can be passed.
| |||||||||||||||||||||
| ShzQtmAirInterfaceEncryption | 1.3.6.1.4.1.7262.2.4.1.1.4 | INTEGER | RO | ||||||||||||||||||
scalar · INTEGER · read-only · current OBSOLETE. This enables encryption on the air interface.
| |||||||||||||||||||||
| ShzQtmSystemCapacityOption | 1.3.6.1.4.1.7262.2.4.1.1.5 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current Sets the system capacity options. There are four options: Select 'singleModem-singleRadio' for a 400Mbps system. Select 'multiModem-singleRadio' for 800Mbps when the system is equipped with an internal or external IF Coupler. Select 'multiModem-multiRadio' for 800Mbps when the system is equipped with two radios connected to a Dual Polarization Radio Mount (DPRM). Select 'singleModem-redundancy' to provide a redundant 400Mbps link using a Redundant Dual Radio Mount (RDRM). Select 'multiCarrierXpic' when two systems are connected together to provide a four channels XPIC link. Notes: Setting the system capacity to 'singleModem-redundancy will fail if the primary path has not been set to either wireless_port1 or wireless_port2. Setting the system capacity to 'multiModem-multiRadio' will set the transmit power of wireless_port2 to the same transmite power as wireless_port1. Changing system capacity requires a reset in order to be activated.
| |||||||||||||||||||||
| ShzQtmSystemLedStatus | 1.3.6.1.4.1.7262.2.4.1.1.6 | DisplayString | RO | ||||||||||||||||||
scalar · DisplayString · read-only · current Indicates the current LED status and colour. | |||||||||||||||||||||
| ShzQtmSaveL2SwConfig | 1.3.6.1.4.1.7262.2.4.1.1.7 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current Writing '1' or 'save' to this object will save all L2 Switch config values.
| |||||||||||||||||||||
| ShzQtmIduTemperature | 1.3.6.1.4.1.7262.2.4.1.1.8 | Integer32 | RO | 3325 | |||||||||||||||||
scalar · Integer32 · read-only · current The IDU temperature in degree Celsius. The actual temperature is determined by dividing the number by 100. e.g. 2825 is actually 28.25 degrees Celsius. Example values from LibreNMS test devices
| |||||||||||||||||||||
| NhzQtmSysUpgradeSpeed | 1.3.6.1.4.1.7262.2.4.1.2 | ||||||||||||||||||||
| ShzQtmLicensedSpeedUpgradeSpeedAndKey | 1.3.6.1.4.1.7262.2.4.1.2.1 | DisplayString | RW | ||||||||||||||||||
scalar · DisplayString · read-write · current Enter your key here along with the maximum speed for that key to upgrade the system. Format: [speed] [key] Example: 800 abc123 | |||||||||||||||||||||
| ShzQtmLicensedSpeedCount | 1.3.6.1.4.1.7262.2.4.1.2.2 | Integer32 | RO | ||||||||||||||||||
scalar · Integer32 · read-only · current This object indicates the number of times the licensed speed has been changed successfully. It is used when generating new license keys for your system. | |||||||||||||||||||||
| NhzQtmSysDowngradeSpeed | 1.3.6.1.4.1.7262.2.4.1.3 | ||||||||||||||||||||
| ShzQtmLicensedSpeedDowngradeSpeed | 1.3.6.1.4.1.7262.2.4.1.3.1 | Integer32 | RW | ||||||||||||||||||
scalar · Integer32 · read-write · current Reduce your licensed speed by entering a speed to this write-only object and take note of the generated key in hzQtmDowngradeLicensedSpeedKey. Format: [speed] Example: 200 | |||||||||||||||||||||
| ShzQtmLicensedSpeedCountUsedForKey | 1.3.6.1.4.1.7262.2.4.1.3.2 | Integer32 | RO | ||||||||||||||||||
scalar · Integer32 · read-only · current This object indicates the number of times the licensed speed has been changed successfully. It is used when generating new license keys for your system. | |||||||||||||||||||||
| ShzQtmLicensedSpeedConfirmationKey | 1.3.6.1.4.1.7262.2.4.1.3.3 | DisplayString | RO | ||||||||||||||||||
scalar · DisplayString · read-only · current This read-only object will show a 'key' after successfully downgrading the license speed. | |||||||||||||||||||||
| ShzQtmSysDowngradeSpeedDecrement | 1.3.6.1.4.1.7262.2.4.1.3.4 | Integer32 | RO | ||||||||||||||||||
| NhzQtmSysSpeed | 1.3.6.1.4.1.7262.2.4.1.4 | ||||||||||||||||||||
| ShzQtmSystemCurrentSpeed | 1.3.6.1.4.1.7262.2.4.1.4.1 | Integer32 (0..2000) | RW | ||||||||||||||||||
scalar · Integer32 (0..2000) · read-write · current Changes the working speed of the horizon. Writes are only valid if system is a FLEX. Due to backwards compatibility issue, 0 value should be treated as 0 Mbps. | |||||||||||||||||||||
| ShzQtmSystemLicensedSpeed | 1.3.6.1.4.1.7262.2.4.1.4.2 | Integer32 (0..2000) | RO | ||||||||||||||||||
scalar · Integer32 (0..2000) · read-only · current Indicates the maximum speed that this system can operate at. Due to backwards compatibility issue, 0 value should be treated as 0 Mbps. | |||||||||||||||||||||
| ThzQtmSystemModeTable | 1.3.6.1.4.1.7262.2.4.1.4.3 | NA | |||||||||||||||||||
table · not-accessible · current A table of system mode settings | |||||||||||||||||||||
| RhzQtmSystemModeEntry | 1.3.6.1.4.1.7262.2.4.1.4.3.1 | NA | |||||||||||||||||||
row · not-accessible · current A system mode entry containing all the system mode values
| |||||||||||||||||||||
| ChzQtmSystemModeIndex | 1.3.6.1.4.1.7262.2.4.1.4.3.1.1 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current A unique value for each system mode. | |||||||||||||||||||||
| ChzQtmSystemModeId | 1.3.6.1.4.1.7262.2.4.1.4.3.1.2 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current System mode Id. | |||||||||||||||||||||
| ChzQtmSystemModeName | 1.3.6.1.4.1.7262.2.4.1.4.3.1.3 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current The system mode name. | |||||||||||||||||||||
| ChzQtmSystemModeProgrammed | 1.3.6.1.4.1.7262.2.4.1.4.3.1.4 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current Specifies the operating system mode for the modem. Notes: Only 1 index may be selected. Changing this option requires a system reset.
| |||||||||||||||||||||
| NhzQtmInventory | 1.3.6.1.4.1.7262.2.4.1.5 | ||||||||||||||||||||
| NhzQtmHwInventory | 1.3.6.1.4.1.7262.2.4.1.5.1 | ||||||||||||||||||||
| ShzQtmFrequencyFilePartNumber | 1.3.6.1.4.1.7262.2.4.1.5.1.1 | DisplayString | RO | ||||||||||||||||||
scalar · DisplayString · read-only · current A textual string containing Part Number of the Frequency File | |||||||||||||||||||||
| ShzQtmUnitSerialNo | 1.3.6.1.4.1.7262.2.4.1.5.1.2 | DisplayString | RO | A2002DED0259 | |||||||||||||||||
scalar · DisplayString · read-only · current A textual string containing Serial Number of the Unit. Example values from LibreNMS test devices
| |||||||||||||||||||||
| ShzQtmUnitAssemblylNo | 1.3.6.1.4.1.7262.2.4.1.5.1.3 | DisplayString | RO | 60-000471-02 | |||||||||||||||||
scalar · DisplayString · read-only · current A textual string containing the Assembly Number of the Unit. Example values from LibreNMS test devices
| |||||||||||||||||||||
| ShzQtmCcaSerialNo | 1.3.6.1.4.1.7262.2.4.1.5.1.4 | DisplayString | RO | ||||||||||||||||||
scalar · DisplayString · read-only · current A textual string containing Serial no of the NCC. | |||||||||||||||||||||
| ShzQtmCcaPartNo | 1.3.6.1.4.1.7262.2.4.1.5.1.5 | DisplayString | RO | ||||||||||||||||||
scalar · DisplayString · read-only · current A textual string containing assembly no of the NCC. | |||||||||||||||||||||
| ShzQtmRadio1SerialNo | 1.3.6.1.4.1.7262.2.4.1.5.1.6 | DisplayString | RO | ||||||||||||||||||
scalar · DisplayString · read-only · current A textual string containing the serial number of radio 1 | |||||||||||||||||||||
| ShzQtmRadio2SerialNo | 1.3.6.1.4.1.7262.2.4.1.5.1.7 | DisplayString | RO | ||||||||||||||||||
scalar · DisplayString · read-only · current A textual string containing the serial number of radio 2 if configured | |||||||||||||||||||||
| ShzQtmRadio1HardwareId | 1.3.6.1.4.1.7262.2.4.1.5.1.8 | DisplayString | RO | ||||||||||||||||||
scalar · DisplayString · read-only · current A textual string containing the hardware id of radio 1 | |||||||||||||||||||||
| ShzQtmRadio2HardwareId | 1.3.6.1.4.1.7262.2.4.1.5.1.9 | DisplayString | RO | ||||||||||||||||||
scalar · DisplayString · read-only · current A textual string containing the hardware id of radio 2 if configured | |||||||||||||||||||||
| ShzQtmRadio1HardwareType | 1.3.6.1.4.1.7262.2.4.1.5.1.10 | DisplayString | RO | ||||||||||||||||||
scalar · DisplayString · read-only · current A textual string containing the hardware type for radio 1 | |||||||||||||||||||||
| ShzQtmRadio2HardwareType | 1.3.6.1.4.1.7262.2.4.1.5.1.11 | DisplayString | RO | ||||||||||||||||||
scalar · DisplayString · read-only · current A textual string containing the hardware type for radio 2 | |||||||||||||||||||||
| NhzQtmSwInventory | 1.3.6.1.4.1.7262.2.4.1.5.2 | ||||||||||||||||||||
| ShzQtmSwInvAppOmniVersionNo | 1.3.6.1.4.1.7262.2.4.1.5.2.1 | DisplayString | RO | 1.3.8 | |||||||||||||||||
scalar · DisplayString · read-only · current The version number of the Omni. Example values from LibreNMS test devices
| |||||||||||||||||||||
| ShzQtmSwInvAppFirmwareVersionNo | 1.3.6.1.4.1.7262.2.4.1.5.2.2 | DisplayString | RO | ||||||||||||||||||
scalar · DisplayString · read-only · current The version number of the FPGA. | |||||||||||||||||||||
| ShzQtmSwInvFrequencyFileVersionNo | 1.3.6.1.4.1.7262.2.4.1.5.2.3 | DisplayString | RO | ||||||||||||||||||
scalar · DisplayString · read-only · current The version number of the FrequencyFile. | |||||||||||||||||||||
| ShzQtmSwInvMibVersionNo | 1.3.6.1.4.1.7262.2.4.1.5.2.4 | DisplayString | RO | ||||||||||||||||||
scalar · DisplayString · read-only · current The version number of the MIB. | |||||||||||||||||||||
| ShzQtmSwInvRadioFirmware1VersionNo | 1.3.6.1.4.1.7262.2.4.1.5.2.5 | DisplayString | RO | ||||||||||||||||||
scalar · DisplayString · read-only · current The radio firmware1 version. | |||||||||||||||||||||
| ShzQtmSwInvRadioFirmware2VersionNo | 1.3.6.1.4.1.7262.2.4.1.5.2.6 | DisplayString | RO | ||||||||||||||||||
scalar · DisplayString · read-only · current The radio firmware2 version. | |||||||||||||||||||||
| ShzQtmSwInvAppSoftwareVersionNo | 1.3.6.1.4.1.7262.2.4.1.5.2.7 | DisplayString | RO | ||||||||||||||||||
scalar · DisplayString · read-only · current The version number of the application software. | |||||||||||||||||||||
| ShzQtmSwInvBootloaderVersionNo | 1.3.6.1.4.1.7262.2.4.1.5.2.8 | DisplayString | RO | ||||||||||||||||||
scalar · DisplayString · read-only · current The bootloader version number. | |||||||||||||||||||||
| ShzQtmSwInvSupportingAppVersionNo | 1.3.6.1.4.1.7262.2.4.1.5.2.9 | DisplayString | RO | ||||||||||||||||||
scalar · DisplayString · read-only · current The version number for the third party applications such as ECFM etc... | |||||||||||||||||||||
| ShzQtmSwInvOperatingSystemVersionNo | 1.3.6.1.4.1.7262.2.4.1.5.2.10 | DisplayString | RO | ||||||||||||||||||
scalar · DisplayString · read-only · current The version number of the running operating system. | |||||||||||||||||||||
| ShzQtmSwInvRadio1CurrentFirmwareVersionNo | 1.3.6.1.4.1.7262.2.4.1.5.2.11 | DisplayString | RO | ||||||||||||||||||
scalar · DisplayString · read-only · current The current running firmware version for Radio1. | |||||||||||||||||||||
| ShzQtmSwInvRadio2CurrentFirmwareVersionNo | 1.3.6.1.4.1.7262.2.4.1.5.2.12 | DisplayString | RO | ||||||||||||||||||
scalar · DisplayString · read-only · current The current running firmware version for Radio2. | |||||||||||||||||||||
| NhzQtmAtpc | 1.3.6.1.4.1.7262.2.4.1.6 | ||||||||||||||||||||
| ShzQtmAtpcEnable | 1.3.6.1.4.1.7262.2.4.1.6.1 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current Indicates whether Automatic Transmit Power Control (ATPC) is enabled.
| |||||||||||||||||||||
| ShzQtmAtpcStatus | 1.3.6.1.4.1.7262.2.4.1.6.2 | DisplayString | RO | ||||||||||||||||||
scalar · DisplayString · read-only · current Indicates the actual condition of ATPC: Enabled if config is on and no issues Auto-Disabled when ATPC coordinated power alarm present Disabled-manual if config set to off | |||||||||||||||||||||
| ShzQtmAtpcCoordinatedPower | 1.3.6.1.4.1.7262.2.4.1.6.3 | DisplayString | RW | ||||||||||||||||||
scalar · DisplayString · read-write · current The Coordinated Power can be enabled by specifying the coordinated power status and coordinated power offset in a string with the following format (without the single quotes): '<on [offset] | off>' The offset can optionally be specified after the 'on' string and after a single space and can be be between 0.0 and 10.0 inclusive. The 'offset' is represented in dBm and indicates the offset below TxPower. The accuracy is limited to tenths of dBm so an offset of 9.99 is recognized as 9.9 dBm. Examples: 'on 5.5' or 'off' | |||||||||||||||||||||
| NhzQtmHitlessAam | 1.3.6.1.4.1.7262.2.4.1.7 | ||||||||||||||||||||
| ShzQtmHitlessAamStatus | 1.3.6.1.4.1.7262.2.4.1.7.1 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current Read or set the Hitless Automatic Adaptive Modulation (HAAM) as 'on' or 'off'. HAAM feature is only available when system peer link compatibility mode is Quantum.
| |||||||||||||||||||||
| ShzQtmHitlessAamManualMode | 1.3.6.1.4.1.7262.2.4.1.7.2 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current Read or set the Hitless Automatic Adaptive Modulation (HAAM) Manual Mode as 'on' or 'off'.
| |||||||||||||||||||||
| ThzQtmHitlessAamTable | 1.3.6.1.4.1.7262.2.4.1.7.3 | NA | |||||||||||||||||||
table · not-accessible · current A table of Hitless Aam. | |||||||||||||||||||||
| RhzQtmHitlessAamEntry | 1.3.6.1.4.1.7262.2.4.1.7.3.1 | NA | |||||||||||||||||||
| ChzQtmHitlessAamIndex | 1.3.6.1.4.1.7262.2.4.1.7.3.1.1 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current A unique value for each interface.
| |||||||||||||||||||||
| ChzQtmHitlessAamCurrentMode | 1.3.6.1.4.1.7262.2.4.1.7.3.1.2 | DisplayString (SIZE (0..24)) | RO | ||||||||||||||||||
column · DisplayString (SIZE (0..24)) · read-only · current A read-only string specifing the currently running Hitless AAM Mode. | |||||||||||||||||||||
| NhzQtmHitlessAamDiagnostics | 1.3.6.1.4.1.7262.2.4.1.7.4 | ||||||||||||||||||||
| ShzQtmHitlessAamModem1Diagnose | 1.3.6.1.4.1.7262.2.4.1.7.4.1 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current This service effecting write-only object accepts either 'up' or 'down' to diagnose whether the modulation speed can be increased or decreased respectively for modem1. Poll the hzQtmAamModem1DiagnosticResult object to determine the results.
| |||||||||||||||||||||
| ShzQtmHitlessAamModem1DiagnosticResult | 1.3.6.1.4.1.7262.2.4.1.7.4.2 | DisplayString | RO | ||||||||||||||||||
scalar · DisplayString · read-only · current The result from Hitless AAM Diagnostic for modem1 is read from this object. | |||||||||||||||||||||
| ShzQtmHitlessAamModem2Diagnose | 1.3.6.1.4.1.7262.2.4.1.7.4.3 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current This service effecting write-only object accepts either 'up' or 'down' to diagnose whether the modulation speed can be increased or decreased respectively for modem2. Poll the hzQtmAamModem2DiagnosticResult object to determine the results.
| |||||||||||||||||||||
| ShzQtmHitlessAamModem2DiagnosticResult | 1.3.6.1.4.1.7262.2.4.1.7.4.4 | DisplayString | RO | ||||||||||||||||||
scalar · DisplayString · read-only · current The result from Hitless AAM Diagnostic for modem2 is read from this object. | |||||||||||||||||||||
| ShzQtmHitlessAamMaxMode | 1.3.6.1.4.1.7262.2.4.1.7.5 | DisplayString | RW | ||||||||||||||||||
scalar · DisplayString · read-write · current Enter a string indicating the highest allowed system mode to be used for Hitless AAM. Example: hz50_364_256qam | |||||||||||||||||||||
| ShzQtmHitlessAamMinMode | 1.3.6.1.4.1.7262.2.4.1.7.6 | DisplayString | RW | ||||||||||||||||||
scalar · DisplayString · read-write · current Enter a string indicating the lowest allowed system mode to be used for Hitless AAM. Example: hz50_67_qpsk | |||||||||||||||||||||
| NhzQtmPeerSysInfo | 1.3.6.1.4.1.7262.2.4.1.8 | ||||||||||||||||||||
| ShzQtmPeerMacAddress | 1.3.6.1.4.1.7262.2.4.1.8.1 | DisplayString | RO | ||||||||||||||||||
scalar · DisplayString · read-only · current The MAC Address of the peer network interface card. | |||||||||||||||||||||
| ShzQtmPeerIpAddress | 1.3.6.1.4.1.7262.2.4.1.8.2 | IpAddress | RO | ||||||||||||||||||
scalar · IpAddress · read-only · current The IP Address of the peer network interface card. | |||||||||||||||||||||
| ShzQtmPeerSubnetMask | 1.3.6.1.4.1.7262.2.4.1.8.3 | IpAddress | RO | ||||||||||||||||||
scalar · IpAddress · read-only · current The subnet mask for the peer network interface card. | |||||||||||||||||||||
| NhzQtmBac | 1.3.6.1.4.1.7262.2.4.1.9 | ||||||||||||||||||||
| ThzQtmBacTable | 1.3.6.1.4.1.7262.2.4.1.9.1 | NA | |||||||||||||||||||
| RhzQtmBacEntry | 1.3.6.1.4.1.7262.2.4.1.9.1.1 | NA | |||||||||||||||||||
row · not-accessible · current
| |||||||||||||||||||||
| ChzQtmBacQIndex | 1.3.6.1.4.1.7262.2.4.1.9.1.1.1 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current A unique value for each of the 4 Queues.
| |||||||||||||||||||||
| ChzQtmBacQEnable | 1.3.6.1.4.1.7262.2.4.1.9.1.1.2 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current Configure Queue Compression state to disable/enable. BAC feature is only available when system peer link compatibility mode is Quantum.
| |||||||||||||||||||||
| ChzQtmBacQBlockSize | 1.3.6.1.4.1.7262.2.4.1.9.1.1.3 | Integer32 (128..8000) | RW | ||||||||||||||||||
column · Integer32 (128..8000) · read-write · current Configure Queue Compression block size (128...8000). Block size has to be in increments of 64 bytes. Otherwise it will be rounded off to nearest 64 bytes. Valid block sizes are <256 512 1024 4032 8000> | |||||||||||||||||||||
| NhzQtmSysDiagnostics | 1.3.6.1.4.1.7262.2.4.1.10 | ||||||||||||||||||||
| ShzQtmIFPath1LoopbackAndTimeout | 1.3.6.1.4.1.7262.2.4.1.10.1 | DisplayString | RW | ||||||||||||||||||
scalar · DisplayString · read-write · current To enable or disable IF path1 loopback. If timeout is not specified it's defaulted to 30 sec and if it's set to 0, infinite loopback is intended. Enter loopback on | off along with the timeout value. Format: [on | off] [timeout in sec] Example: on 40 Enabling loopback is service disruptive. | |||||||||||||||||||||
| ShzQtmIFPath2LoopbackAndTimeout | 1.3.6.1.4.1.7262.2.4.1.10.2 | DisplayString | RW | ||||||||||||||||||
scalar · DisplayString · read-write · current To enable or disable IF path2 loopback. If timeout is not specified it's defaulted to 30 sec and if it's set to 0, infinite loopback is intended. Enter loopback on | off along with the timeout value. Format: [on | off] [timeout in sec] Example: on 40 Enabling loopback is service disruptive. | |||||||||||||||||||||
| ShzQtmRadio1LoopbackAndTimeout | 1.3.6.1.4.1.7262.2.4.1.10.3 | DisplayString | RW | ||||||||||||||||||
scalar · DisplayString · read-write · current To enable or disable radio1 loopback. This feature is only supported when 1002+ radio is connected. If timeout is not specified it's defaulted to 30 sec and if it's set to 0, infinite loopback is intended. Enter loopback on | off along with the timeout value. Format: [on | off] [timeout in sec] Example: on 40 Enabling loopback is service disruptive. | |||||||||||||||||||||
| ShzQtmRadio2LoopbackAndTimeout | 1.3.6.1.4.1.7262.2.4.1.10.4 | DisplayString | RW | ||||||||||||||||||
scalar · DisplayString · read-write · current To enable or disable radio2 loopback. This feature is only supported when 1002+ radio is connected. If timeout is not specified it's defaulted to 30 sec and if it's set to 0, infinite loopback is intended. Enter loopback on | off along with the timeout value. Format: [on | off] [timeout in sec] Example: on 40 Enabling loopback is service disruptive. | |||||||||||||||||||||
| NhzQtmSysLicensedFeatureGroups | 1.3.6.1.4.1.7262.2.4.1.11 | ||||||||||||||||||||
| ThzQtmSysUpgradeFeatureGroupsTable | 1.3.6.1.4.1.7262.2.4.1.11.1 | NA | |||||||||||||||||||
table · not-accessible · current A table of system upgrade feature groups. | |||||||||||||||||||||
| RhzQtmSysUpgradeFeatureGroupsEntry | 1.3.6.1.4.1.7262.2.4.1.11.1.1 | NA | |||||||||||||||||||
row · not-accessible · current A system upgrade feature group entry containing all licensed feature groups. | |||||||||||||||||||||
| ChzQtmUpgradeLicensedFeatureIndex | 1.3.6.1.4.1.7262.2.4.1.11.1.1.1 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current A unique value for each licensed group. Please note XPIC, HAAM and BAC feature is only available when system peer link compatibility mode is Quantum.
| |||||||||||||||||||||
| ChzQtmUpgradeLicensedFeatureKey | 1.3.6.1.4.1.7262.2.4.1.11.1.1.2 | DisplayString | RW | ||||||||||||||||||
column · DisplayString · read-write · current The key required for upgrading a feature. | |||||||||||||||||||||
| ChzQtmUpgradeLicensedFeatureCount | 1.3.6.1.4.1.7262.2.4.1.11.1.1.3 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current This object indicates the number of times the licensed feature has been changed successfully. | |||||||||||||||||||||
| ThzQtmSysDowngradeFeatureGroupsTable | 1.3.6.1.4.1.7262.2.4.1.11.2 | NA | |||||||||||||||||||
table · not-accessible · current A table of system downgrade system groups. | |||||||||||||||||||||
| RhzQtmSysDowngradeFeatureGroupsEntry | 1.3.6.1.4.1.7262.2.4.1.11.2.1 | NA | |||||||||||||||||||
row · not-accessible · current A system downgrade feature group entry containing all licensed feature groups. | |||||||||||||||||||||
| ChzQtmDowngradeLicensedFeatureIndex | 1.3.6.1.4.1.7262.2.4.1.11.2.1.1 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current A unique value for each licensed group.
| |||||||||||||||||||||
| ChzQtmDowngradeLicensedFeature | 1.3.6.1.4.1.7262.2.4.1.11.2.1.2 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current Downgrading a licensed feature.
| |||||||||||||||||||||
| ChzQtmDowngradeLicensedFeatureCount | 1.3.6.1.4.1.7262.2.4.1.11.2.1.3 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current This object indicates the number of times the licensed feature has been downgraded. | |||||||||||||||||||||
| ChzQtmDowngradeLicensedFeatureKey | 1.3.6.1.4.1.7262.2.4.1.11.2.1.4 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current The key generated after downgrading a licensed feature. | |||||||||||||||||||||
| ThzQtmSysLicensedFeatureGroupsTable | 1.3.6.1.4.1.7262.2.4.1.11.3 | NA | |||||||||||||||||||
| RhzQtmSysLicensedFeatureGroupsEntry | 1.3.6.1.4.1.7262.2.4.1.11.3.1 | NA | |||||||||||||||||||
row · not-accessible · current | |||||||||||||||||||||
| ChzQtmSysLicensedFeatureGroupIndex | 1.3.6.1.4.1.7262.2.4.1.11.3.1.1 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current A unique value for each licensed group.
| |||||||||||||||||||||
| ChzQtmSysLicensedFeatureGroup | 1.3.6.1.4.1.7262.2.4.1.11.3.1.2 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current The name of the licensed feature group. | |||||||||||||||||||||
| ChzQtmSysLicensedFeatureGroupStatus | 1.3.6.1.4.1.7262.2.4.1.11.3.1.3 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Specifies whether the feature group is unlicensed or licensed.
| |||||||||||||||||||||
| NhzQtmXpic | 1.3.6.1.4.1.7262.2.4.1.12 | ||||||||||||||||||||
| ShzQtmXpicStatus | 1.3.6.1.4.1.7262.2.4.1.12.1 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current Read or set the XPIC as 'on' or 'off'. XPIC feature is only available when system peer link compatibility mode is Quantum.
| |||||||||||||||||||||
| ShzQtmXpicActualStatus | 1.3.6.1.4.1.7262.2.4.1.12.2 | INTEGER | RO | ||||||||||||||||||
scalar · INTEGER · read-only · current Read the actual XPIC status as 'on' or 'off'. XPIC feature is only available when system peer link compatibility mode is Quantum.
| |||||||||||||||||||||
| ShzQtmXpicMode | 1.3.6.1.4.1.7262.2.4.1.12.3 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current Read or set the XPIC mode. The XPIC mode defines which system is controlling the radio (master) in a Multi Carrier XPIC configuration.
| |||||||||||||||||||||
| NhzQtmPlcm | 1.3.6.1.4.1.7262.2.4.1.13 | ||||||||||||||||||||
| ShzQtmPlcmMode | 1.3.6.1.4.1.7262.2.4.1.13.1 | INTEGER | RO | ||||||||||||||||||
scalar · INTEGER · read-only · current Decides if the peer in the link is a Quantum or a Duo.
| |||||||||||||||||||||
| ShzQtmPlcmConfigQtmAsDuo | 1.3.6.1.4.1.7262.2.4.1.13.2 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current When enabled, a DUO compatible configuration is used when PLCM is configured as QTM.
| |||||||||||||||||||||
| ThzQtmPlcmPeerOmniVersionTable | 1.3.6.1.4.1.7262.2.4.1.13.3 | NA | |||||||||||||||||||
table · not-accessible · current A table of omni version of the peer when PLCM mode is configured as Duo | |||||||||||||||||||||
| RhzQtmPlcmPeerOmniVersionEntry | 1.3.6.1.4.1.7262.2.4.1.13.3.1 | NA | |||||||||||||||||||
row · not-accessible · current A omni version of the peer when PLCM mode is configured as Duo entry containing all the omni version | |||||||||||||||||||||
| ChzQtmPlcmPeerOmniVersionIndex | 1.3.6.1.4.1.7262.2.4.1.13.3.1.1 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current A unique value for each peer omni name. | |||||||||||||||||||||
| ChzQtmPlcmPeerOmniVersionName | 1.3.6.1.4.1.7262.2.4.1.13.3.1.2 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current The peer omni name. | |||||||||||||||||||||
| ChzQtmPlcmPeerOmniVersionProgrammed | 1.3.6.1.4.1.7262.2.4.1.13.3.1.3 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current omni version of the peer when PLCM mode is configured as Duo. Notes: Only 1 index may be selected.
| |||||||||||||||||||||
| ShzQtmPlcmMgtInterface | 1.3.6.1.4.1.7262.2.4.1.13.4 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current Decide the peer link management interface when PLCM mode is configured as a Duo.
| |||||||||||||||||||||
| ShzQtmPlcmDataPort | 1.3.6.1.4.1.7262.2.4.1.13.5 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current Describes the Ethernet traffic Port when PLCM mode is configured as a Duo. Data port and management port have to be same when configured as 'inband' management and data port and management port cannot be same for 'outOfBand' and 'port2 extended' configuration.
| |||||||||||||||||||||
| ShzQtmPlcmDataVlanTag | 1.3.6.1.4.1.7262.2.4.1.13.6 | Integer32 (1..4095) | RW | ||||||||||||||||||
scalar · Integer32 (1..4095) · read-write · current Indicates the Vlan Tag Id (1...4095)for Ethernet data when PLCM mode is configured as a Duo. | |||||||||||||||||||||
| ShzQtmPlcmMgmtPort | 1.3.6.1.4.1.7262.2.4.1.13.7 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current Describes the network management traffic port when PLCM mode is configured as a Duo. Data port and management port have to be same when configured as 'inband' management and data port and management port cannot be same for 'outOfBand' and 'port2 extended' configuration.
| |||||||||||||||||||||
| ShzQtmPlcmMgmtVlanTagging | 1.3.6.1.4.1.7262.2.4.1.13.8 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current Describes the network management traffic on has VLAN tagging on or not when PLCM mode is configured as a Duo.
| |||||||||||||||||||||
| ShzQtmPlcmMgmtVlanTag | 1.3.6.1.4.1.7262.2.4.1.13.9 | Integer32 (1..4095) | RW | ||||||||||||||||||
scalar · Integer32 (1..4095) · read-write · current Indicates the Vlan Tag Id (1...4095)for management data when PLCM mode is configured as a Duo. | |||||||||||||||||||||
| ShzQtmPlcmMgmtTagPriority | 1.3.6.1.4.1.7262.2.4.1.13.10 | Integer32 (0..7) | RW | ||||||||||||||||||
scalar · Integer32 (0..7) · read-write · current The priority for vlan tagging (0...7)for management data when PLCM mode is configured as a Duo. | |||||||||||||||||||||
| ShzQtmPlcmApplySaveResetSystem | 1.3.6.1.4.1.7262.2.4.1.13.20 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current Writing '1' to this object apply peer link compatibility mib changes, save the mib and resets the NIC, Modem, and radio.
| |||||||||||||||||||||
| NhzQtmBandwidthDoubling | 1.3.6.1.4.1.7262.2.4.1.14 | ||||||||||||||||||||
| ShzQtmBandwidthDoublingMode | 1.3.6.1.4.1.7262.2.4.1.14.1 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current Read or set bandwidth doubling mode.
| |||||||||||||||||||||
| ShzQtmBandwidthDoublingActualMode | 1.3.6.1.4.1.7262.2.4.1.14.2 | INTEGER | RO | ||||||||||||||||||
scalar · INTEGER · read-only · current Read the actual bandwidth doubling mode.
| |||||||||||||||||||||
| ShzQtmBandwidthDoublingPort | 1.3.6.1.4.1.7262.2.4.1.14.3 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current Read or set the bandwidth doubling data port interconnected between two systems.
| |||||||||||||||||||||
| ShzQtmBandwidthDoublingActualPort | 1.3.6.1.4.1.7262.2.4.1.14.4 | INTEGER | RO | ||||||||||||||||||
scalar · INTEGER · read-only · current Read the actual bandwidth doubling data port interconnected between two systems.
| |||||||||||||||||||||
| NhzQtmSyncE | 1.3.6.1.4.1.7262.2.4.1.15 | ||||||||||||||||||||
| ShzQtmSyncEMode | 1.3.6.1.4.1.7262.2.4.1.15.1 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current Synchronous Ethernet support. When synchE is enabled, it can take clock from the following sources: free-run, Ethernet port3 to port8, wireless port1 or wireless port2. off: disables synchE support. manual: user specifies which port's incoming clock is to be used as clock source. If the specified port has no incoming clock, free-run will be used. auto: using user configured clock source prority, Quantum selects the best available clock as source. esmc: Quantum works in Ethernet Synchronization Messaging Channel mode. It supports Synchronous Status Message.
| |||||||||||||||||||||
| ShzQtmSyncEPrimarySource | 1.3.6.1.4.1.7262.2.4.1.15.2 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current Selects which port to be used as syncE primary clock source.
| |||||||||||||||||||||
| ShzQtmSyncESecondarySource | 1.3.6.1.4.1.7262.2.4.1.15.3 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current Selects which port to be used as syncE secondary when the master syncE is not available.
| |||||||||||||||||||||
| ShzQtmSyncEMemberPorts | 1.3.6.1.4.1.7262.2.4.1.15.4 | DisplayString | RW | ||||||||||||||||||
scalar · DisplayString · read-write · current Enter a string indicating all SyncE member ports. Example: p3 wp1 Port options: p3 p4 p5 p6 p7 p8 wp1 wp2 | |||||||||||||||||||||
| ShzQtmSyncEForcedHoldover | 1.3.6.1.4.1.7262.2.4.1.15.5 | DisplayString | RW | ||||||||||||||||||
scalar · DisplayString · read-write · current This forces SyncE into holdover mode. After the configurable timeout value, the forced holdover will be over. The forced timeout can be 0 to 300sec, 0 means infinite and default is 30sec. | |||||||||||||||||||||
| ShzQtmSyncERevertive | 1.3.6.1.4.1.7262.2.4.1.15.6 | DisplayString | RW | ||||||||||||||||||
scalar · DisplayString · read-write · current In revertive mode, if the current source is secondary and the primary is Ok for configured amount of time, the primary will be used. The default revertive time is 10sec. | |||||||||||||||||||||
| ShzQtmSyncEClockSource | 1.3.6.1.4.1.7262.2.4.1.15.7 | INTEGER | RO | ||||||||||||||||||
scalar · INTEGER · read-only · current Retrieves Synce clock source.
| |||||||||||||||||||||
| ShzQtmSyncEAcquisitionStatus | 1.3.6.1.4.1.7262.2.4.1.15.8 | DisplayString | RO | ||||||||||||||||||
scalar · DisplayString · read-only · current Retrieves Synce acquisition status. | |||||||||||||||||||||
| ShzQtmSyncEWanderFilter | 1.3.6.1.4.1.7262.2.4.1.15.9 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current ITU G.8262 specifies different wander filter requirements for networks based on the 2.048 kbit/s hiearchy , option1, vs those based on the 1.544kbit/s hiearchy, option2. Option 2 specifies a low pass filter bandwidth of 0.1Hz, while option1 specifies a badwidth between 1 and10 Hz.
| |||||||||||||||||||||
| NhzQtmAuthentication | 1.3.6.1.4.1.7262.2.4.2 | ||||||||||||||||||||
| ShzQtmUniquePeerAuthenticationKey | 1.3.6.1.4.1.7262.2.4.2.1 | DisplayString (SIZE (0..34)) | RW | ||||||||||||||||||
scalar · DisplayString (SIZE (0..34)) · read-write · current The serial number of the peer node that this node will communicate with. This is only used when authentication mode is set to unique. | |||||||||||||||||||||
| ShzQtmPeerDetectedSerialNumber | 1.3.6.1.4.1.7262.2.4.2.2 | DisplayString | RO | ||||||||||||||||||
scalar · DisplayString · read-only · current The serial number of the peer node that the system is presently communicating with. This is only used when authentication is set to unique. | |||||||||||||||||||||
| ShzQtmAuthenticationMode | 1.3.6.1.4.1.7262.2.4.2.3 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current This sets the authentication mode for the system.If configured for unique authentication, an horizon node only exchanges user traffic with one other horizon node. The serial number is used in this case. If configured for group authentication, an horizon node exchanges user traffic with another horizon node of the same group and uses the authentication keys. Note: Changing this option requires a system reset.
| |||||||||||||||||||||
| ShzQtmAuthenticationFailureAction | 1.3.6.1.4.1.7262.2.4.2.4 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current This sets the authentication failure action for the system. Block traffic will block all user traffic including remote management access. Pass traffic will allow all user traffic to be sent and recieved Note: Changing this option requires a system reset.
| |||||||||||||||||||||
| ShzQtmPeerAuthenticationStatus | 1.3.6.1.4.1.7262.2.4.2.5 | INTEGER | RO | ||||||||||||||||||
scalar · INTEGER · read-only · current Specifies the current authentication status of the system. Authenticated means authentication is on and the system has been authenticated, notAuthenticated means authentication is off or the system has not communicated yet with the other node, explicit authentication failure means authentication is on and authentication has failed
| |||||||||||||||||||||
| ShzQtmGroupAuthenticationKey | 1.3.6.1.4.1.7262.2.4.2.6 | DisplayString (SIZE (0..34)) | RW | ||||||||||||||||||
scalar · DisplayString (SIZE (0..34)) · read-write · current The serial number of the group that this node will communicate within. This is only used when authentication mode is set to group. | |||||||||||||||||||||
| NhzQtmNetworkManagement | 1.3.6.1.4.1.7262.2.4.3 | ||||||||||||||||||||
| ShzQtmMacAddress | 1.3.6.1.4.1.7262.2.4.3.1 | DisplayString | RO | ||||||||||||||||||
scalar · DisplayString · read-only · current The MAC Address of the network interface card. | |||||||||||||||||||||
| ShzQtmIpAddress | 1.3.6.1.4.1.7262.2.4.3.2 | IpAddress | RO | ||||||||||||||||||
scalar · IpAddress · read-only · current The IP Address of the network interface card. Note: Changing IP Address requires a system reset. | |||||||||||||||||||||
| ShzQtmSubnetMask | 1.3.6.1.4.1.7262.2.4.3.3 | IpAddress | RO | ||||||||||||||||||
scalar · IpAddress · read-only · current The subnet mask for the network interface card. Note: Changing Subnet Mask requires a system reset. | |||||||||||||||||||||
| ShzQtmDefaultGateway | 1.3.6.1.4.1.7262.2.4.3.4 | IpAddress | RO | ||||||||||||||||||
scalar · IpAddress · read-only · current The default gateway for the network interface card. Note: Changing Default Gateway requires a system reset. | |||||||||||||||||||||
| ShzQtmTelnetAccessMode | 1.3.6.1.4.1.7262.2.4.3.5 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current Indicates whether Telnet access is allowed.
| |||||||||||||||||||||
| ShzQtmSshAccessMode | 1.3.6.1.4.1.7262.2.4.3.6 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current Indicates whether ssh access is allowed.
| |||||||||||||||||||||
| NhzQtmNetworkManagementInterface | 1.3.6.1.4.1.7262.2.4.3.8 | ||||||||||||||||||||
| ShzQtmNetMgmtPortList | 1.3.6.1.4.1.7262.2.4.3.8.1 | DisplayString | RW | ||||||||||||||||||
scalar · DisplayString · read-write · current Describes the network management interface connection options. Enter a string indicating all management ports. Example: p1 p4 p6 dp3 Switch Port options: p1 p2 p3 p4 p5 p6 p7 p8 dp1 dp2 dp3 dp4 Note: Changing this option requires a system reset. | |||||||||||||||||||||
| ShzQtmNetMgmtVlanTagId | 1.3.6.1.4.1.7262.2.4.3.8.2 | Integer32 (1..4095) | RW | ||||||||||||||||||
scalar · Integer32 (1..4095) · read-write · current Indicates the Vlan Tag Id (1...4095). Note: Changing this option requires a system reset. | |||||||||||||||||||||
| ShzQtmNetMgmtVlanTagPriority | 1.3.6.1.4.1.7262.2.4.3.8.3 | Integer32 (0..7) | RW | ||||||||||||||||||
scalar · Integer32 (0..7) · read-write · current The priority for vlan tagging (0...7) Note: Changing this option requires a system reset. | |||||||||||||||||||||
| NhzQtmNetworkInterface | 1.3.6.1.4.1.7262.2.4.4 | ||||||||||||||||||||
| NhzQtmEnetPort | 1.3.6.1.4.1.7262.2.4.4.1 | ||||||||||||||||||||
| ThzQtmEnetPortConfigTable | 1.3.6.1.4.1.7262.2.4.4.1.1 | NA | |||||||||||||||||||
| RhzQtmEnetPortConfigEntry | 1.3.6.1.4.1.7262.2.4.4.1.1.1 | NA | |||||||||||||||||||
row · not-accessible · current
| |||||||||||||||||||||
| ChzQtmEnetPortIndex | 1.3.6.1.4.1.7262.2.4.4.1.1.1.1 | INTEGER | RO | enet-port-1(1) | |||||||||||||||||
column · INTEGER · read-only · current
Example values from LibreNMS test devices
| |||||||||||||||||||||
| ChzQtmEnetPortName | 1.3.6.1.4.1.7262.2.4.4.1.1.1.2 | DisplayString | RO | p1 | |||||||||||||||||
column · DisplayString · read-only · current Describes the port interface name Example values from LibreNMS test devices
| |||||||||||||||||||||
| ChzQtmEnetPortAutoNegotiation | 1.3.6.1.4.1.7262.2.4.4.1.1.1.3 | INTEGER | RW | on(1) | |||||||||||||||||
column · INTEGER · read-write · current Turns auto-negotiation on or off for Ethernet Port. Turning off results in the interface defaulting to 100BaseT, Full Duplex.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| ChzQtmEnetPortSpeed | 1.3.6.1.4.1.7262.2.4.4.1.1.1.4 | INTEGER | RW | x1000M(3) | |||||||||||||||||
column · INTEGER · read-write · current Configure the port interface speed .
Example values from LibreNMS test devices
| |||||||||||||||||||||
| ChzQtmEnetPortDuplex | 1.3.6.1.4.1.7262.2.4.4.1.1.1.5 | INTEGER | RW | full(1) | |||||||||||||||||
column · INTEGER · read-write · current Configure the port interface duplex.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| ChzQtmEnetPortMedia | 1.3.6.1.4.1.7262.2.4.4.1.1.1.6 | INTEGER | RO | sfp(2) | |||||||||||||||||
column · INTEGER · read-only · current Configure the port interface media.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| ChzQtmEnetPortAdminState | 1.3.6.1.4.1.7262.2.4.4.1.1.1.7 | INTEGER | RW | off(2) | |||||||||||||||||
column · INTEGER · read-write · current Enable or disable the admin status of the port.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| ChzQtmEnetPortPauseFrame | 1.3.6.1.4.1.7262.2.4.4.1.1.1.8 | INTEGER | RW | disabled(1) | |||||||||||||||||
column · INTEGER · read-write · current When PAUSE is enabled, port pause frames can be generated by the system and the pause frames will flow toward the link partner on the network. Pause frams can be enabled for Rx, Tx or both. When PAUSE is not enabled, no pause frames will be generated by the system.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| ChzQtmEnetPortMaxFrameSize | 1.3.6.1.4.1.7262.2.4.4.1.1.1.9 | Integer32 (1600..9600) | RW | 1600 | |||||||||||||||||
column · Integer32 (1600..9600) · read-write · current The default maximum frame size is 1600 bytes.
The settable lowest maximum frame size is 1600, and the settable
highest maximum frame size is 9600. If the chosen maximum
frame size is out of this range, the default maximum frame
size of 1600 is used.Example values from LibreNMS test devices
| |||||||||||||||||||||
| ThzQtmEnetPortStatusTable | 1.3.6.1.4.1.7262.2.4.4.1.2 | NA | |||||||||||||||||||
| RhzQtmEnetPortStatusEntry | 1.3.6.1.4.1.7262.2.4.4.1.2.1 | NA | |||||||||||||||||||
row · not-accessible · current | |||||||||||||||||||||
| ChzQtmEnetPortStatusIndex | 1.3.6.1.4.1.7262.2.4.4.1.2.1.1 | INTEGER | RO | enet-port-1(1) | |||||||||||||||||
column · INTEGER · read-only · current
Example values from LibreNMS test devices
| |||||||||||||||||||||
| ChzQtmEnetPortLinkStatus | 1.3.6.1.4.1.7262.2.4.4.1.2.1.2 | INTEGER | RO | down(1) | |||||||||||||||||
column · INTEGER · read-only · current Indicates the port link status.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| ChzQtmEnetPortAutoNegotiationStatus | 1.3.6.1.4.1.7262.2.4.4.1.2.1.3 | INTEGER | RO | on(1) | |||||||||||||||||
column · INTEGER · read-only · current Indicates the port AutoNegotiation status.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| ChzQtmEnetPortSpeedStatus | 1.3.6.1.4.1.7262.2.4.4.1.2.1.4 | INTEGER | RO | invalid(5) | |||||||||||||||||
column · INTEGER · read-only · current Indicates the port interface speed status.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| ChzQtmEnetPortDuplexStatus | 1.3.6.1.4.1.7262.2.4.4.1.2.1.5 | INTEGER | RO | full(1) | |||||||||||||||||
column · INTEGER · read-only · current Indicates the port interface duplex status.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| ChzQtmEnetPortMediaStatus | 1.3.6.1.4.1.7262.2.4.4.1.2.1.6 | INTEGER | RO | invalid(4) | |||||||||||||||||
column · INTEGER · read-only · current Indicates the port interface media status.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| ThzQtmEnetPortStatsTable | 1.3.6.1.4.1.7262.2.4.4.1.3 | NA | |||||||||||||||||||
| RhzQtmEnetPortStatsEntry | 1.3.6.1.4.1.7262.2.4.4.1.3.1 | NA | |||||||||||||||||||
row · not-accessible · current | |||||||||||||||||||||
| ChzQtmEnetPortStatsIndex | 1.3.6.1.4.1.7262.2.4.4.1.3.1.1 | INTEGER | RO | enet-port-1(1) | |||||||||||||||||
column · INTEGER · read-only · current
Example values from LibreNMS test devices
| |||||||||||||||||||||
| ChzQtmEnetPortRxBytes | 1.3.6.1.4.1.7262.2.4.4.1.3.1.2 | Counter64 | RO | 0 | |||||||||||||||||
column · Counter64 · read-only · current The total number of bytes received on the interface, including framing characters. Example values from LibreNMS test devices
| |||||||||||||||||||||
| ChzQtmEnetPortRxUcastPkts | 1.3.6.1.4.1.7262.2.4.4.1.3.1.3 | Counter64 | RO | 0 | |||||||||||||||||
column · Counter64 · read-only · current The number of subnetwork-unicast packets delivered to a higher-layer protocol. Example values from LibreNMS test devices
| |||||||||||||||||||||
| ChzQtmEnetPortRxNUcastPkts | 1.3.6.1.4.1.7262.2.4.4.1.3.1.4 | Counter64 | RO | 0 | |||||||||||||||||
column · Counter64 · read-only · current The number of non-unicast (i.e., subnetwork-broadcast or subnetwork-multicast) packets delivered to a higher-layer protocol. Example values from LibreNMS test devices
| |||||||||||||||||||||
| ChzQtmEnetPortRxDiscards | 1.3.6.1.4.1.7262.2.4.4.1.3.1.5 | Counter64 | RO | 0 | |||||||||||||||||
column · Counter64 · read-only · current The number of inbound packets which were chosen to be discarded even though no errors had been detected to prevent their being deliverable to a higher-layer protocol. One possible reason for discarding such a packet could be to free up buffer space. Example values from LibreNMS test devices
| |||||||||||||||||||||
| ChzQtmEnetPortRxErrors | 1.3.6.1.4.1.7262.2.4.4.1.3.1.6 | Counter64 | RO | 0 | |||||||||||||||||
column · Counter64 · read-only · current The number of inbound packets that contained errors preventing them from being deliverable to a higher-layer protocol. Example values from LibreNMS test devices
| |||||||||||||||||||||
| ChzQtmEnetPortRxUnknownProtos | 1.3.6.1.4.1.7262.2.4.4.1.3.1.7 | Counter64 | RO | 0 | |||||||||||||||||
column · Counter64 · read-only · current The number of packets received via the interface which were discarded because of an unknown or unsupported protocol. Example values from LibreNMS test devices
| |||||||||||||||||||||
| ChzQtmEnetPortTxBytes | 1.3.6.1.4.1.7262.2.4.4.1.3.1.8 | Counter64 | RO | 0 | |||||||||||||||||
column · Counter64 · read-only · current The total number of bytes transmitted out of the interface, including framing characters. Example values from LibreNMS test devices
| |||||||||||||||||||||
| ChzQtmEnetPortTxUcastPkts | 1.3.6.1.4.1.7262.2.4.4.1.3.1.9 | Counter64 | RO | 0 | |||||||||||||||||
column · Counter64 · read-only · current The total number of packets that higher-level protocols requested be transmitted to a subnetwork-unicast address, including those that were discarded or not sent. Example values from LibreNMS test devices
| |||||||||||||||||||||
| ChzQtmEnetPortTxNUcastPkts | 1.3.6.1.4.1.7262.2.4.4.1.3.1.10 | Counter64 | RO | 0 | |||||||||||||||||
column · Counter64 · read-only · current The total number of packets that higher-level protocols requested be transmitted to a non- unicast (i.e., a subnetwork-broadcast or subnetwork-multicast) address, including those that were discarded or not sent. Example values from LibreNMS test devices
| |||||||||||||||||||||
| ChzQtmEnetPortTxDiscards | 1.3.6.1.4.1.7262.2.4.4.1.3.1.11 | Counter64 | RO | 0 | |||||||||||||||||
column · Counter64 · read-only · current The number of outbound packets which were chosen to be discarded even though no errors had been detected to prevent their being transmitted. One possible reason for discarding such a packet could be to free up buffer space. Example values from LibreNMS test devices
| |||||||||||||||||||||
| ChzQtmEnetPortTxErrors | 1.3.6.1.4.1.7262.2.4.4.1.3.1.12 | Counter64 | RO | 0 | |||||||||||||||||
column · Counter64 · read-only · current The number of outbound packets that could not be transmitted because of errors. Example values from LibreNMS test devices
| |||||||||||||||||||||
| NhzQtmAggregatedEnetPort | 1.3.6.1.4.1.7262.2.4.4.2 | ||||||||||||||||||||
| NhzQtmAggregatedEnetPortConfig | 1.3.6.1.4.1.7262.2.4.4.2.1 | ||||||||||||||||||||
| ShzQtmEnetPortDroppedEnetFramesThresholdParameters | 1.3.6.1.4.1.7262.2.4.4.2.1.1 | DisplayString (SIZE (0..24)) | RW | ||||||||||||||||||
scalar · DisplayString (SIZE (0..24)) · read-write · current A read-write string: The threshold, in percent, and the number of seconds that it must exceed this threshold are programmed by the user. An example of the format of the string is as follows: '70 10'. The first parameter is the percentage of frames that are dropped, the second is the time in seconds that the threshold must be exceeded. The single quote marks i.e. ' ' are not used in the command. | |||||||||||||||||||||
| ShzQtmEnetPortBWUtilizationThresholdParameters | 1.3.6.1.4.1.7262.2.4.4.2.1.2 | DisplayString (SIZE (0..24)) | RW | ||||||||||||||||||
scalar · DisplayString (SIZE (0..24)) · read-write · current A read-write string: The percentage of available bandwidth threshold and the number of seconds that it must exceed this threshold are programmed by the user. An example of the format of the string is as follows: '70 10'. The first parameter is the threshold point in percent, the number of seconds that the threshold must be exceeded. The single quote marks i.e. ' ' are not used in the command. | |||||||||||||||||||||
| NhzQtmAggregatedEnetPortStats | 1.3.6.1.4.1.7262.2.4.4.2.2 | ||||||||||||||||||||
| ShzQtmAggPortTxFrames | 1.3.6.1.4.1.7262.2.4.4.2.2.1 | Counter64 | RO | ||||||||||||||||||
scalar · Counter64 · read-only · current The current count of aggregated port egress frames. | |||||||||||||||||||||
| ShzQtmAggPortTxBytes | 1.3.6.1.4.1.7262.2.4.4.2.2.2 | Counter64 | RO | ||||||||||||||||||
scalar · Counter64 · read-only · current The current count of aggregated port egress bytes. | |||||||||||||||||||||
| ShzQtmAggPortRxFramesOK | 1.3.6.1.4.1.7262.2.4.4.2.2.3 | Counter64 | RO | ||||||||||||||||||
scalar · Counter64 · read-only · current The current count of aggregated port ingress frames. | |||||||||||||||||||||
| ShzQtmAggPortRxBytesOK | 1.3.6.1.4.1.7262.2.4.4.2.2.4 | Counter64 | RO | ||||||||||||||||||
scalar · Counter64 · read-only · current The current count of aggregated port ingress bytes. | |||||||||||||||||||||
| ShzQtmAggPortRxFramesError | 1.3.6.1.4.1.7262.2.4.4.2.2.5 | Counter64 | RO | ||||||||||||||||||
scalar · Counter64 · read-only · current The current count of aggregated port ingress errors. | |||||||||||||||||||||
| ShzQtmAggPortBWUtilization | 1.3.6.1.4.1.7262.2.4.4.2.2.6 | Integer32 | RO | ||||||||||||||||||
scalar · Integer32 · read-only · current The carried load over link capacity for port. | |||||||||||||||||||||
| ShzQtmAggPortIngressDataRate | 1.3.6.1.4.1.7262.2.4.4.2.2.7 | Integer32 | RO | ||||||||||||||||||
scalar · Integer32 · read-only · current The data rate coming into the ethernet for port. The data rate you see is multiplied by 100. e.g. A display of 1530 is actually 15.30 Mpbs | |||||||||||||||||||||
| ShzQtmAggPortEgressDataRate | 1.3.6.1.4.1.7262.2.4.4.2.2.8 | Integer32 | RO | ||||||||||||||||||
scalar · Integer32 · read-only · current The data rate going out of the ethernet for port. The data rate you see is multiplied by 100. e.g. A display of 1530 is actually 15.30 Mpbs. | |||||||||||||||||||||
| ShzQtmAggPortFramesInQueue1 | 1.3.6.1.4.1.7262.2.4.4.2.2.9 | Counter64 | RO | ||||||||||||||||||
scalar · Counter64 · read-only · current The current count of frames passed through queue 1. | |||||||||||||||||||||
| ShzQtmAggPortFramesInQueue2 | 1.3.6.1.4.1.7262.2.4.4.2.2.10 | Counter64 | RO | ||||||||||||||||||
scalar · Counter64 · read-only · current The current count of frames passed through queue 2. | |||||||||||||||||||||
| ShzQtmAggPortFramesInQueue3 | 1.3.6.1.4.1.7262.2.4.4.2.2.11 | Counter64 | RO | ||||||||||||||||||
scalar · Counter64 · read-only · current The current count of frames passed through queue 3. | |||||||||||||||||||||
| ShzQtmAggPortFramesInQueue4 | 1.3.6.1.4.1.7262.2.4.4.2.2.12 | Counter64 | RO | ||||||||||||||||||
scalar · Counter64 · read-only · current The current count of frames passed through queue 4. | |||||||||||||||||||||
| ShzQtmAggPortFramesInQueue1Discarded | 1.3.6.1.4.1.7262.2.4.4.2.2.13 | Counter64 | RO | ||||||||||||||||||
scalar · Counter64 · read-only · current The current count of frames received in queue 1 that were discarded due to an error. One possible reason is lack of buffer space. | |||||||||||||||||||||
| ShzQtmAggPortFramesInQueue2Discarded | 1.3.6.1.4.1.7262.2.4.4.2.2.14 | Counter64 | RO | ||||||||||||||||||
scalar · Counter64 · read-only · current The current count of frames received in queue 2 that were discarded due to an error. One possible reason is lack of buffer space. | |||||||||||||||||||||
| ShzQtmAggPortFramesInQueue3Discarded | 1.3.6.1.4.1.7262.2.4.4.2.2.15 | Counter64 | RO | ||||||||||||||||||
scalar · Counter64 · read-only · current The current count of frames received in queue 3 that were discarded due to an error. One possible reason is lack of buffer space. | |||||||||||||||||||||
| ShzQtmAggPortFramesInQueue4Discarded | 1.3.6.1.4.1.7262.2.4.4.2.2.16 | Counter64 | RO | ||||||||||||||||||
scalar · Counter64 · read-only · current The current count of frames received in queue 4 that were discarded due to an error. One possible reason is lack of buffer space. | |||||||||||||||||||||
| ShzQtmAggPortFramesInQueueC | 1.3.6.1.4.1.7262.2.4.4.2.2.17 | Counter64 | RO | ||||||||||||||||||
scalar · Counter64 · read-only · current The current count of frames passed through queue C. | |||||||||||||||||||||
| ShzQtmAggPortFramesInQueueCDiscarded | 1.3.6.1.4.1.7262.2.4.4.2.2.18 | Counter64 | RO | ||||||||||||||||||
scalar · Counter64 · read-only · current The current count of frames received in queue C that were discarded due to an error. One possible reason is lack of buffer space. | |||||||||||||||||||||
| NhzQtmWirelessInterface | 1.3.6.1.4.1.7262.2.4.5 | ||||||||||||||||||||
| NhzQtmWirelessInterfaceNames | 1.3.6.1.4.1.7262.2.4.5.1 | ||||||||||||||||||||
| ThzQtmWirelessInterfaceNameTable | 1.3.6.1.4.1.7262.2.4.5.1.1 | NA | |||||||||||||||||||
table · not-accessible · current A table of Wireless Interface Modems | |||||||||||||||||||||
| RhzQtmWirelessInterfaceNameEntry | 1.3.6.1.4.1.7262.2.4.5.1.1.1 | NA | |||||||||||||||||||
| ChzQtmWirelessInterfaceNameIndex | 1.3.6.1.4.1.7262.2.4.5.1.1.1.1 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current A unique value for each interface.
| |||||||||||||||||||||
| ChzQtmWirelessInterfaceName | 1.3.6.1.4.1.7262.2.4.5.1.1.1.2 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current Describes the functionality of the Wireless Interface | |||||||||||||||||||||
| NhzQtmWirelessInterfaceModems | 1.3.6.1.4.1.7262.2.4.5.2 | ||||||||||||||||||||
| ThzQtmModemTable | 1.3.6.1.4.1.7262.2.4.5.2.1 | NA | |||||||||||||||||||
table · not-accessible · current A table of Wireless Interface Modems | |||||||||||||||||||||
| RhzQtmModemEntry | 1.3.6.1.4.1.7262.2.4.5.2.1.1 | NA | |||||||||||||||||||
| ChzQtmModemIndex | 1.3.6.1.4.1.7262.2.4.5.2.1.1.1 | INTEGER | RO | wireless-port-1(1) | |||||||||||||||||
column · INTEGER · read-only · current A unique value for each interface.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| ChzQtmModemOperStatus | 1.3.6.1.4.1.7262.2.4.5.2.1.1.2 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current The current operational state of the interface. Testing indicates that no operational packets can be passed.
| |||||||||||||||||||||
| ChzQtmModemChannelizedRSL | 1.3.6.1.4.1.7262.2.4.5.2.1.1.3 | Integer32 | RO | -370 | |||||||||||||||||
column · Integer32 · read-only · current An estimate of the modem's channelized RSL. Divide the value by 10 to get the actual RSL value. Once this number is divided by 10 the units are dBm. For example -352 is actually -35.2dBm Example values from LibreNMS test devices
| |||||||||||||||||||||
| ChzQtmModemChannelizedRSLUnsignedInt | 1.3.6.1.4.1.7262.2.4.5.2.1.1.4 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current The absolute value of the estimate of the modem's channelized RSL. Divide the value by 10 to get the actual RSL value. Once this number is divided by 10 the units are dBm. For example -352 is actually 35.2dBm | |||||||||||||||||||||
| ChzQtmModemModulationType | 1.3.6.1.4.1.7262.2.4.5.2.1.1.5 | INTEGER | RO | qpsk(1) | |||||||||||||||||
column · INTEGER · read-only · current The modulation type of the modem, distinguished according to the physical/link protocol.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| ChzQtmModemRxSpeed | 1.3.6.1.4.1.7262.2.4.5.2.1.1.6 | Integer32 | RO | 457500 | |||||||||||||||||
column · Integer32 · read-only · current An estimate of the modem's current Rx bandwidth in bits per second. Divide the value by 10000 to get the actual data rate in Mbps Example values from LibreNMS test devices
| |||||||||||||||||||||
| ChzQtmModemTxSpeed | 1.3.6.1.4.1.7262.2.4.5.2.1.1.7 | Integer32 | RO | 457500 | |||||||||||||||||
column · Integer32 · read-only · current An estimate of the modem's current Tx bandwidth in bits per second. Divide the value by 10000 to get the actual data rate in Mbps Example values from LibreNMS test devices
| |||||||||||||||||||||
| ChzQtmModemSNR | 1.3.6.1.4.1.7262.2.4.5.2.1.1.8 | Integer32 | RO | 389 | |||||||||||||||||
column · Integer32 · read-only · current SNR value in dB. Divide the value by 10 to get the actual SNR. Example values from LibreNMS test devices
| |||||||||||||||||||||
| ChzQtmModemEbToNoiseRatio | 1.3.6.1.4.1.7262.2.4.5.2.1.1.9 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current The ratio of the modem Estimated Energy per information bit to Noise power spectral density. Divide the value by 10 to get the actual EbToNoiseRatio | |||||||||||||||||||||
| ChzQtmModemEqualizerStress | 1.3.6.1.4.1.7262.2.4.5.2.1.1.10 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current Indicates the average magnitude of all the equalizer taps to provide a measure of how hard the equalizer is working. | |||||||||||||||||||||
| ChzQtmModemSNRThresholdParameters | 1.3.6.1.4.1.7262.2.4.5.2.1.1.11 | DisplayString (SIZE (0..24)) | RW | ||||||||||||||||||
column · DisplayString (SIZE (0..24)) · read-write · current A read-write string specifing the modem SNR threshold. | |||||||||||||||||||||
| ChzQtmModemChannelizedRslBelowThresholdParameters | 1.3.6.1.4.1.7262.2.4.5.2.1.1.12 | DisplayString (SIZE (0..24)) | RW | ||||||||||||||||||
column · DisplayString (SIZE (0..24)) · read-write · current A read-write string: The threshold in dBm and the number of seconds threshold are programmed by the user. An example of the format of the string is as follows: '-75 10'. The first parameter power level in dBm, the second is the time in seconds that the threshold must be exceeded. In this example the threshold -75 dBm and the time is set to 10 seconds. The single quote marks i.e. ' ' are not used in the command. | |||||||||||||||||||||
| ChzQtmModemXpicEqualizerStress | 1.3.6.1.4.1.7262.2.4.5.2.1.1.13 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current Indicates the average magnitude of all the XPIC equalizer taps to provide a measure of how hard the XPIC equalizer is working. | |||||||||||||||||||||
| ChzQtmModemXPI | 1.3.6.1.4.1.7262.2.4.5.2.1.1.14 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current The XPI is a measure of the cross-polarization distortion (interference) (named XPD or XPI) with reference to the main received signal level. XPI is calculated as a ratio of XPIC_equalizer_stress to (Main_equalizer_stress + 512). This value is converted to dB by using the formula 20*log( XPIC_equalizer_stress / (Main_equalizer_stress + 512)) . Divide the value by 100 to get the actual RSL value. | |||||||||||||||||||||
| ThzQtmModemStatsTable | 1.3.6.1.4.1.7262.2.4.5.2.2 | NA | |||||||||||||||||||
table · not-accessible · current A table of Wireless Interface Modem Statistics | |||||||||||||||||||||
| RhzQtmModemStatsEntry | 1.3.6.1.4.1.7262.2.4.5.2.2.1 | NA | |||||||||||||||||||
| ChzQtmModemStatsIndex | 1.3.6.1.4.1.7262.2.4.5.2.2.1.1 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current A unique value for each interface.
| |||||||||||||||||||||
| ChzQtmModemTxBlocks | 1.3.6.1.4.1.7262.2.4.5.2.2.1.2 | Counter64 | RO | ||||||||||||||||||
column · Counter64 · read-only · current The current count of Modem blocks transmitted. | |||||||||||||||||||||
| ChzQtmModemRxBlocksOKs | 1.3.6.1.4.1.7262.2.4.5.2.2.1.3 | Counter64 | RO | ||||||||||||||||||
column · Counter64 · read-only · current The current count of Modem blocks received. | |||||||||||||||||||||
| ChzQtmModemRxBlocksErrors | 1.3.6.1.4.1.7262.2.4.5.2.2.1.4 | Counter64 | RO | ||||||||||||||||||
column · Counter64 · read-only · current The current count of Modem blocks received in error. | |||||||||||||||||||||
| ThzQtmWirelessEnetPortStatsTable | 1.3.6.1.4.1.7262.2.4.5.2.3 | NA | |||||||||||||||||||
| RhzQtmWirelessEnetPortStatsEntry | 1.3.6.1.4.1.7262.2.4.5.2.3.1 | NA | |||||||||||||||||||
row · not-accessible · current | |||||||||||||||||||||
| ChzQtmWirelessEnetPortIndex | 1.3.6.1.4.1.7262.2.4.5.2.3.1.1 | INTEGER | RO | wireless-enetport-1(1) | |||||||||||||||||
column · INTEGER · read-only · current A unique value for each interface.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| ChzQtmWirelessEnetPortTxFrames | 1.3.6.1.4.1.7262.2.4.5.2.3.1.2 | Counter64 | RO | ||||||||||||||||||
column · Counter64 · read-only · current The current count of Ethernet Combiner frames sent. | |||||||||||||||||||||
| ChzQtmWirelessEnetPortRxFramesOK | 1.3.6.1.4.1.7262.2.4.5.2.3.1.3 | Counter64 | RO | ||||||||||||||||||
column · Counter64 · read-only · current The current count of good Ethernet Combiner frames received. | |||||||||||||||||||||
| ChzQtmWirelessEnetPortRxFramesErrors | 1.3.6.1.4.1.7262.2.4.5.2.3.1.4 | Counter64 | RO | 161695 | |||||||||||||||||
column · Counter64 · read-only · current The current count of Ethernet Combiner frames received in error. Example values from LibreNMS test devices
| |||||||||||||||||||||
| ChzQtmWirelessEnetPortRxFramesQueueDiscards | 1.3.6.1.4.1.7262.2.4.5.2.3.1.5 | Counter64 | RO | ||||||||||||||||||
column · Counter64 · read-only · current The current count of Ethernet Combiner frames in the queue that were discarded. | |||||||||||||||||||||
| NhzQtmWirelessInterfaceIF | 1.3.6.1.4.1.7262.2.4.5.3 | ||||||||||||||||||||
| ThzQtmIntermediateFrequencyTable | 1.3.6.1.4.1.7262.2.4.5.3.1 | NA | |||||||||||||||||||
table · not-accessible · current A table of Intermediate Frequency pat(pliu) | |||||||||||||||||||||
| RhzQtmIntermediateFrequencyEntry | 1.3.6.1.4.1.7262.2.4.5.3.1.1 | NA | |||||||||||||||||||
| ChzQtmIFPathIndex | 1.3.6.1.4.1.7262.2.4.5.3.1.1.1 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current A unique value for each path.
| |||||||||||||||||||||
| ChzQtmIFPathTxLockStatus | 1.3.6.1.4.1.7262.2.4.5.3.1.1.2 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Indicates if the IF transmit synthesizer is locked.
| |||||||||||||||||||||
| ChzQtmIFPathRxLockStatus | 1.3.6.1.4.1.7262.2.4.5.3.1.1.3 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Indicates if the IF receive synthesizer is locked.
| |||||||||||||||||||||
| ChzQtmIFPathLoopbackLockStatus | 1.3.6.1.4.1.7262.2.4.5.3.1.1.4 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Indicates if the IF loopback synthesizer is locked. The loopback synthesize is used only when the IF loopback is enabled.
| |||||||||||||||||||||
| NhzQtmWirelessInterfaceRadios | 1.3.6.1.4.1.7262.2.4.5.4 | ||||||||||||||||||||
| ThzQtmRadioTable | 1.3.6.1.4.1.7262.2.4.5.4.1 | NA | |||||||||||||||||||
table · not-accessible · current A table of Wireless Interface Radios | |||||||||||||||||||||
| RhzQtmRadioEntry | 1.3.6.1.4.1.7262.2.4.5.4.1.1 | NA | |||||||||||||||||||
| ChzQtmRadioIndex | 1.3.6.1.4.1.7262.2.4.5.4.1.1.1 | INTEGER | RO | wireless-port-1(1) | |||||||||||||||||
column · INTEGER · read-only · current A unique value for each interface.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| ChzQtmRadioDescription | 1.3.6.1.4.1.7262.2.4.5.4.1.1.2 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current A textual string containing information about the radio. Includes the manufacturer, product name, software version, serial number, and hardware version of the radio. | |||||||||||||||||||||
| ChzQtmRadioOperStatus | 1.3.6.1.4.1.7262.2.4.5.4.1.1.3 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current The current operational state of the interface. Testing indicates that no operational packets can be passed. Testing also indicates that a firmware upgrade may be in progress
| |||||||||||||||||||||
| ChzQtmRadioLastChanged | 1.3.6.1.4.1.7262.2.4.5.4.1.1.4 | TimeTicks | RO | ||||||||||||||||||
column · TimeTicks · read-only · current The value of sysUpTime at the time the radio entered its current operational state. If the current state was entered prior to the last re-initialization of the local network management subsystem, then this object contains a zero value. | |||||||||||||||||||||
| ChzQtmRadioReceiveSignalLevel | 1.3.6.1.4.1.7262.2.4.5.4.1.1.5 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current The Received Signal Level indicates the power of the receive level in dBm. The number is divided by 10 to get the actual dBm. For example, -432 is actually -43.2dBm. | |||||||||||||||||||||
| ChzQtmRadioReceiveSignalLevelUnsigned | 1.3.6.1.4.1.7262.2.4.5.4.1.1.6 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current The Received Signal Level indicates the power of the receive level in dBm. The number is divided by -10. e.g. 432 is actually -43.2dBm. Object provided to accomodate plotting of negative RSL values which is not supported in some EMS (i.e.: CastleRock). Please use 'hzQtmRadioReceiveSignalLevel' object if your EMS supports plotting of negative integers. | |||||||||||||||||||||
| ChzQtmRadioTxGain | 1.3.6.1.4.1.7262.2.4.5.4.1.1.7 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current The gain of the radio in the transmit chain. Indicates the gain in dB. | |||||||||||||||||||||
| ChzQtmRadioRxGain | 1.3.6.1.4.1.7262.2.4.5.4.1.1.8 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current The gain of the radio in the receive chain. Indicates the gain in dB. | |||||||||||||||||||||
| ChzQtmRadioReset | 1.3.6.1.4.1.7262.2.4.5.4.1.1.9 | Integer32 | RW | ||||||||||||||||||
column · Integer32 · read-write · current Writing 1 to this object causes the radio to be reset. All other values are not recognized. This variable always reads back as 0. radioOperStatus should be polled by the user after this object is written to, to verify that the radio card has been reset. | |||||||||||||||||||||
| ChzQtmRadioTransmitPowerdBm | 1.3.6.1.4.1.7262.2.4.5.4.1.1.10 | Integer32 | RW | ||||||||||||||||||
column · Integer32 · read-write · current This defines the programmed transmit level of the radio. The power you see is divided by 10. e.g. A display of 133 is actually 13.3 dBm. Notes: - Programmed and Actual transmit power may differ - see hzQtmRadioActualTransmitPower. | |||||||||||||||||||||
| ChzQtmRadioPowerOption | 1.3.6.1.4.1.7262.2.4.5.4.1.1.11 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current This indicates the power option of the radio: normal or high power.
| |||||||||||||||||||||
| ChzQtmRadioTxState | 1.3.6.1.4.1.7262.2.4.5.4.1.1.12 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current This indicates the power option of the radio: normal or high power.
| |||||||||||||||||||||
| ChzQtmRadioActualTxState | 1.3.6.1.4.1.7262.2.4.5.4.1.1.13 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current This defines the actual transmit state of the radio.
| |||||||||||||||||||||
| ChzQtmRadioTemperature | 1.3.6.1.4.1.7262.2.4.5.4.1.1.14 | Integer32 | RO | 125 | |||||||||||||||||
column · Integer32 · read-only · current The Radio temperature in degree Celsius. The actual temperature is determined by dividing the number by 10. e.g. 202 is actually 20.2 degrees Celsius. Example values from LibreNMS test devices
| |||||||||||||||||||||
| ChzQtmRadioRxCableLoss | 1.3.6.1.4.1.7262.2.4.5.4.1.1.15 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current The Rx Cable Loss in dB. | |||||||||||||||||||||
| ChzQtmRadioTxCableLoss | 1.3.6.1.4.1.7262.2.4.5.4.1.1.16 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current The Tx Cable Loss in dB. | |||||||||||||||||||||
| ChzQtmRadioTxCableLossChange | 1.3.6.1.4.1.7262.2.4.5.4.1.1.17 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current The Tx Cable Loss Change is the difference between the configured TxPower and the measured TxPower measured in dB. | |||||||||||||||||||||
| ChzQtmRadioMaxTransmitPowerdBm | 1.3.6.1.4.1.7262.2.4.5.4.1.1.18 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current The maximum Transmit Power allowed. | |||||||||||||||||||||
| ChzQtmRadioActualTransmitPowerdBm | 1.3.6.1.4.1.7262.2.4.5.4.1.1.19 | Integer32 | RO | 230 | |||||||||||||||||
column · Integer32 · read-only · current This defines the actual transmit level of the radio. The power you see is divided by 10. e.g. A display of 133 is actually 13.3 dBm. This value will be undefined: - If the radio is operational and muted. - If the radio is not operational. - If the radio does not have transmit calibration tables programmed into its EEPROM, this transmit power level cannot be used as it is not possible to accurately calculate the actual transmit level. In this case this object will return -99. Example values from LibreNMS test devices
| |||||||||||||||||||||
| NhzQtmWirelessInterfaceRadioFrequencies | 1.3.6.1.4.1.7262.2.4.5.5 | ||||||||||||||||||||
| NhzQtmWirelessInterfaceRadio1Frequencies | 1.3.6.1.4.1.7262.2.4.5.5.1 | ||||||||||||||||||||
| ShzQtmRadio1FreqGroupSelected | 1.3.6.1.4.1.7262.2.4.5.5.1.1 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current The frequency group selected for Radio 1. The frequency subbands are divided into frequency groups txHigh and txLow. An horizon system must have one node configured to txLow and the other node configure to txHigh
| |||||||||||||||||||||
| ThzQtmRadio1BandTable | 1.3.6.1.4.1.7262.2.4.5.5.1.2 | NA | |||||||||||||||||||
table · not-accessible · current A table of radio bands for Radio 1. Frequency bands are divided into sub bands. i.e. FCC 23 Ghz Band is comprised of fcc23a, fcc23b, fcc23c and fcc23d which make up the entire FCC23 band | |||||||||||||||||||||
| RhzQtmRadio1BandEntry | 1.3.6.1.4.1.7262.2.4.5.5.1.2.1 | NA | |||||||||||||||||||
row · not-accessible · current A radio band entry containing all the radio band values
| |||||||||||||||||||||
| ChzQtmRadio1BandIndex | 1.3.6.1.4.1.7262.2.4.5.5.1.2.1.1 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current A unique value for each radio band. | |||||||||||||||||||||
| ChzQtmRadio1BandId | 1.3.6.1.4.1.7262.2.4.5.5.1.2.1.2 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current radio band ID. Note: Changing radio band ID requires a system reset. | |||||||||||||||||||||
| ChzQtmRadio1BandName | 1.3.6.1.4.1.7262.2.4.5.5.1.2.1.3 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current The radio band name. | |||||||||||||||||||||
| ChzQtmRadio1BandProgrammed | 1.3.6.1.4.1.7262.2.4.5.5.1.2.1.4 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current Specifies the operating radio band for the modem. ***Only 1 index may be selected in a 1 modem system.
| |||||||||||||||||||||
| ThzQtmRadio1TxHighFreqTable | 1.3.6.1.4.1.7262.2.4.5.5.1.3 | NA | |||||||||||||||||||
table · not-accessible · current A table of txHigh frequency settings for Radio 1 | |||||||||||||||||||||
| RhzQtmRadio1TxHighFreqEntry | 1.3.6.1.4.1.7262.2.4.5.5.1.3.1 | NA | |||||||||||||||||||
row · not-accessible · current A txHighFrequency entry containing all the frequency values | |||||||||||||||||||||
| ChzQtmRadio1TxHighFreqIndex | 1.3.6.1.4.1.7262.2.4.5.5.1.3.1.1 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current A unique value for each frequency channel. | |||||||||||||||||||||
| ChzQtmRadio1TxHighFreqChannelIndex | 1.3.6.1.4.1.7262.2.4.5.5.1.3.1.2 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current The channel index for the frequency. | |||||||||||||||||||||
| ChzQtmRadio1TxHighFreqTransmitRfFrequency | 1.3.6.1.4.1.7262.2.4.5.5.1.3.1.3 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current The RF TX frequency in KHz. | |||||||||||||||||||||
| ChzQtmRadio1TxHighFreqReceiveRfFrequency | 1.3.6.1.4.1.7262.2.4.5.5.1.3.1.4 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current The RF RX frequency in KHz. | |||||||||||||||||||||
| ChzQtmRadio1TxHighFreqProgrammed | 1.3.6.1.4.1.7262.2.4.5.5.1.3.1.5 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current Specifies the operating frequency channel for the modem.
Note : For Multi Carrier XPIC configuration it specifies the frequency channel of the Master unit.
***Only 1 index may be selected in a 1 modem system.
| |||||||||||||||||||||
| ThzQtmRadio1TxLowFreqTable | 1.3.6.1.4.1.7262.2.4.5.5.1.4 | NA | |||||||||||||||||||
table · not-accessible · current A table of txLow frequency settings for Radio 1 | |||||||||||||||||||||
| RhzQtmRadio1TxLowFreqEntry | 1.3.6.1.4.1.7262.2.4.5.5.1.4.1 | NA | |||||||||||||||||||
row · not-accessible · current A hzQtmTxLowFrequeny entry containing the frequency values for a specific index | |||||||||||||||||||||
| ChzQtmRadio1TxLowFreqIndex | 1.3.6.1.4.1.7262.2.4.5.5.1.4.1.1 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current A unique value for each frequency channel. | |||||||||||||||||||||
| ChzQtmRadio1TxLowFreqChannelIndex | 1.3.6.1.4.1.7262.2.4.5.5.1.4.1.2 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current The channel index for the frequency. | |||||||||||||||||||||
| ChzQtmRadio1TxLowFreqTransmitRfFrequency | 1.3.6.1.4.1.7262.2.4.5.5.1.4.1.3 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current The RF TX frequency in KHz. | |||||||||||||||||||||
| ChzQtmRadio1TxLowFreqReceiveRfFrequency | 1.3.6.1.4.1.7262.2.4.5.5.1.4.1.4 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current The RF RX frequency in KHz. | |||||||||||||||||||||
| ChzQtmRadio1TxLowFreqProgrammed | 1.3.6.1.4.1.7262.2.4.5.5.1.4.1.5 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current Specifies the operating frequency channel for the modem.
Note : For Multi Carrier XPIC configuration it specifies the frequency channel of the Master unit.
Notes:
Only 1 index may be selected in a 1 modem system.
Changing Programmed Frequency requires a system reset.
| |||||||||||||||||||||
| NhzQtmRadio1ProgrammedFrequency | 1.3.6.1.4.1.7262.2.4.5.5.1.5 | ||||||||||||||||||||
| ShzQtmRadio1ProgrammedFrequencyChannel | 1.3.6.1.4.1.7262.2.4.5.5.1.5.1 | DisplayString | RO | ||||||||||||||||||
scalar · DisplayString · read-only · current The channel that has been programmed for Radio 1. | |||||||||||||||||||||
| ShzQtmRadio1ProgrammedFrequencyTxRf | 1.3.6.1.4.1.7262.2.4.5.5.1.5.2 | Integer32 | RO | ||||||||||||||||||
scalar · Integer32 · read-only · current The programmed RF TX frequency in KHz. | |||||||||||||||||||||
| ShzQtmRadio1ProgrammedFrequencyRxRf | 1.3.6.1.4.1.7262.2.4.5.5.1.5.3 | Integer32 | RO | ||||||||||||||||||
scalar · Integer32 · read-only · current The RF RX frequency in KHz. | |||||||||||||||||||||
| NhzQtmWirelessInterfaceRadio2Frequencies | 1.3.6.1.4.1.7262.2.4.5.5.2 | ||||||||||||||||||||
| ShzQtmRadio2FreqGroupSelected | 1.3.6.1.4.1.7262.2.4.5.5.2.1 | INTEGER | RO | ||||||||||||||||||
scalar · INTEGER · read-only · current The frequency group selected for Radio 2. The frequency subbands are divided into frequency groups txHigh and txLow. An horizon system must have one node configured to txLow and the other node configure to txHigh
| |||||||||||||||||||||
| ThzQtmRadio2BandTable | 1.3.6.1.4.1.7262.2.4.5.5.2.2 | NA | |||||||||||||||||||
table · not-accessible · current A table of Radio Bands for Radio 2 | |||||||||||||||||||||
| RhzQtmRadio2BandEntry | 1.3.6.1.4.1.7262.2.4.5.5.2.2.1 | NA | |||||||||||||||||||
row · not-accessible · current A table of radio bands for Radio 2. Frequency bands are divided into sub bands. i.e. FCC 23 Ghz Band is comprised of fcc23a, fcc23b, fcc23c and fcc23d which make up the entire FCC23 band
| |||||||||||||||||||||
| ChzQtmRadio2BandIndex | 1.3.6.1.4.1.7262.2.4.5.5.2.2.1.1 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current A unique value for each radio band. | |||||||||||||||||||||
| ChzQtmRadio2BandId | 1.3.6.1.4.1.7262.2.4.5.5.2.2.1.2 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current Radio band ID. Note: Changing radio band ID requires a system reset. | |||||||||||||||||||||
| ChzQtmRadio2BandName | 1.3.6.1.4.1.7262.2.4.5.5.2.2.1.3 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current The radio band name. | |||||||||||||||||||||
| ChzQtmRadio2BandProgrammed | 1.3.6.1.4.1.7262.2.4.5.5.2.2.1.4 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Specifies the operating radio band for the modem. ***Only 1 index may be selected in a 1 modem system.
| |||||||||||||||||||||
| ThzQtmRadio2TxHighFreqTable | 1.3.6.1.4.1.7262.2.4.5.5.2.3 | NA | |||||||||||||||||||
table · not-accessible · current A table of txHigh frequency settings for Radio 2 | |||||||||||||||||||||
| RhzQtmRadio2TxHighFreqEntry | 1.3.6.1.4.1.7262.2.4.5.5.2.3.1 | NA | |||||||||||||||||||
row · not-accessible · current A txHighFrequency entry containing all the frequency values | |||||||||||||||||||||
| ChzQtmRadio2TxHighFreqIndex | 1.3.6.1.4.1.7262.2.4.5.5.2.3.1.1 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current A unique value for each frequency channel. | |||||||||||||||||||||
| ChzQtmRadio2TxHighFreqChannelIndex | 1.3.6.1.4.1.7262.2.4.5.5.2.3.1.2 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current The channel index for the frequency. | |||||||||||||||||||||
| ChzQtmRadio2TxHighFreqTransmitRfFrequency | 1.3.6.1.4.1.7262.2.4.5.5.2.3.1.3 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current The RF TX frequency in KHz. | |||||||||||||||||||||
| ChzQtmRadio2TxHighFreqReceiveRfFrequency | 1.3.6.1.4.1.7262.2.4.5.5.2.3.1.4 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current The RF RX frequency in KHz. | |||||||||||||||||||||
| ChzQtmRadio2TxHighFreqProgrammed | 1.3.6.1.4.1.7262.2.4.5.5.2.3.1.5 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current Specifies the operating frequency channel for the modem.
Note : For Multi Carrier XPIC configuration it specifies the frequency channel of the Slave unit.
Notes:
Only 1 index may be selected in a 1 modem system.
Changing Programmed Frequency requires a system reset.
| |||||||||||||||||||||
| ThzQtmRadio2TxLowFreqTable | 1.3.6.1.4.1.7262.2.4.5.5.2.4 | NA | |||||||||||||||||||
table · not-accessible · current A table of txLow frequency settings for Radio 2 | |||||||||||||||||||||
| RhzQtmRadio2TxLowFreqEntry | 1.3.6.1.4.1.7262.2.4.5.5.2.4.1 | NA | |||||||||||||||||||
row · not-accessible · current A hzQtmTxLowFrequeny entry containing the frequency values for a specific index | |||||||||||||||||||||
| ChzQtmRadio2TxLowFreqIndex | 1.3.6.1.4.1.7262.2.4.5.5.2.4.1.1 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current A unique value for each frequency channel. | |||||||||||||||||||||
| ChzQtmRadio2TxLowFreqChannelIndex | 1.3.6.1.4.1.7262.2.4.5.5.2.4.1.2 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current The channel index for the frequency. | |||||||||||||||||||||
| ChzQtmRadio2TxLowFreqTransmitRfFrequency | 1.3.6.1.4.1.7262.2.4.5.5.2.4.1.3 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current The RF TX frequency in KHz. | |||||||||||||||||||||
| ChzQtmRadio2TxLowFreqReceiveRfFrequency | 1.3.6.1.4.1.7262.2.4.5.5.2.4.1.4 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current The RF RX frequency in KHz. | |||||||||||||||||||||
| ChzQtmRadio2TxLowFreqProgrammed | 1.3.6.1.4.1.7262.2.4.5.5.2.4.1.5 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current Specifies the operating frequency channel for the modem.
Note : For Multi Carrier XPIC configuration it specifies the frequency channel of the Slave unit.
Notes:
Only 1 index may be selected in a 1 modem system.
Changing Programmed Frequency requires a system reset.
| |||||||||||||||||||||
| NhzQtmRadio2ProgrammedFrequency | 1.3.6.1.4.1.7262.2.4.5.5.2.5 | ||||||||||||||||||||
| ShzQtmRadio2ProgrammedFrequencyChannel | 1.3.6.1.4.1.7262.2.4.5.5.2.5.1 | DisplayString | RO | ||||||||||||||||||
scalar · DisplayString · read-only · current The channel that has been programmed for Radio 2. | |||||||||||||||||||||
| ShzQtmRadio2ProgrammedFrequencyTxRf | 1.3.6.1.4.1.7262.2.4.5.5.2.5.2 | Integer32 | RO | ||||||||||||||||||
scalar · Integer32 · read-only · current The programmed RF TX frequency in KHz. | |||||||||||||||||||||
| ShzQtmRadio2ProgrammedFrequencyRxRf | 1.3.6.1.4.1.7262.2.4.5.5.2.5.3 | Integer32 | RO | ||||||||||||||||||
scalar · Integer32 · read-only · current The RF RX frequency in KHz. | |||||||||||||||||||||
| NhzQtmWirelessInterfaceAntenna | 1.3.6.1.4.1.7262.2.4.5.6 | ||||||||||||||||||||
| ShzQtmAntennaDiameter | 1.3.6.1.4.1.7262.2.4.5.6.1 | INTEGER | RO | ||||||||||||||||||
scalar · INTEGER · read-only · current This defines the diameter of the antenna represented in inches.
| |||||||||||||||||||||
| ShzQtmAntenna1Tilt | 1.3.6.1.4.1.7262.2.4.5.6.2 | INTEGER | RO | ||||||||||||||||||
scalar · INTEGER · read-only · current This defines the position of the antenna for radio 1.
| |||||||||||||||||||||
| ShzQtmAntenna2Tilt | 1.3.6.1.4.1.7262.2.4.5.6.3 | INTEGER | RO | ||||||||||||||||||
scalar · INTEGER · read-only · current This defines the position of the antenna for radio 2.
| |||||||||||||||||||||
| NhzQtmWirelessInterfaceRedundancy | 1.3.6.1.4.1.7262.2.4.5.7 | ||||||||||||||||||||
| ShzQtmWirelessInterfaceRedundancyActiveWirelessPort | 1.3.6.1.4.1.7262.2.4.5.7.1 | INTEGER | RO | ||||||||||||||||||
scalar · INTEGER · read-only · current This attribute indicates the active wireless port and is only applicable when the system capacity has been configured to singleCarrier-redundancy.
| |||||||||||||||||||||
| ShzQtmWirelessInterfaceRedundancyPrimaryWirelessPort | 1.3.6.1.4.1.7262.2.4.5.7.2 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current This attribute indicates the primary wireless port and is only applicable when the system capacity has been configured to singleCarrier-redundancy. The primary wireless port indicates which wireless port is connected to the 'primary' port on the RDRM coupler.
| |||||||||||||||||||||
| ShzQtmWirelessInterfaceRedundancySwitchingAlgorithm | 1.3.6.1.4.1.7262.2.4.5.7.3 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current This attribute selects the rule that will determine when a redundant path switch will take place. There are two options: manual and algorithm-based. The 'Manual' option turns off the automatic path switching feature. Only an operator can switch the active path.
| |||||||||||||||||||||
| ShzQtmWirelessInterfaceRedundancySwitchCause | 1.3.6.1.4.1.7262.2.4.5.7.4 | DisplayString | RO | ||||||||||||||||||
scalar · DisplayString · read-only · current This string indicates the reason that a redundancy switch has occurred. If the active port is the primary port then this string is empty. | |||||||||||||||||||||
| ShzQtmWirelessInterfaceRedundancyRemoveFaulty | 1.3.6.1.4.1.7262.2.4.5.7.5 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current This object removes the specified port from the faulty port list.
| |||||||||||||||||||||
| NhzQtmWirelessInterfaceRedundancyDiagnostics | 1.3.6.1.4.1.7262.2.4.5.7.6 | ||||||||||||||||||||
| ShzQtmWirelessInterfaceRedundancyDiagnose | 1.3.6.1.4.1.7262.2.4.5.7.6.1 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current This write-only object will diagnose problems with switching paths. Write diagnose (1) to this object and check results in hzQtmWirelessInterfaceRedundancyDiagnosticResult object
| |||||||||||||||||||||
| ShzQtmWirelessInterfaceRedundancyDiagnosticResult | 1.3.6.1.4.1.7262.2.4.5.7.6.2 | DisplayString | RO | ||||||||||||||||||
scalar · DisplayString · read-only · current The result from Redundancy Diagnostic is read from this object. Note that the diagnostic result presented in this object is private to SNMP initiated diagnostics. If a diagnostic is initiated from the CLI or WEB, this result will remain unchanged. | |||||||||||||||||||||
| NhzQtmWirelessInterfaceRedundancyRadioSwitch | 1.3.6.1.4.1.7262.2.4.5.7.7 | ||||||||||||||||||||
| ShzQtmWirelessInterfaceRedundancySwitchRadio | 1.3.6.1.4.1.7262.2.4.5.7.7.1 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current This write-only object will switch radio redunancy. Write switch (1) to this object and check results in hzQtmWirelessInterfaceRedundancySwitchRadioResult object.
| |||||||||||||||||||||
| ShzQtmWirelessInterfaceRedundancySwitchRadioResult | 1.3.6.1.4.1.7262.2.4.5.7.7.2 | DisplayString | RO | ||||||||||||||||||
scalar · DisplayString · read-only · current The Switch Radio result is presented in this object. | |||||||||||||||||||||
| NhzQtmCalendar | 1.3.6.1.4.1.7262.2.4.6 | ||||||||||||||||||||
| ShzQtmDate | 1.3.6.1.4.1.7262.2.4.6.1 | DisplayString | RW | ||||||||||||||||||
scalar · DisplayString · read-write · current A string in the format as follows: XX/YY/ZZ Where XX = day of month (range 01 to 31) YY = month of year(range 01 to 12) ZZ = year (range 01 - 99) | |||||||||||||||||||||
| ShzQtmTime | 1.3.6.1.4.1.7262.2.4.6.2 | DisplayString | RW | ||||||||||||||||||
scalar · DisplayString · read-write · current A string in the format as follows:
aa:bb:cc.ddd
Where aa = hour of day ( range 00 to 23 )
bb = minute of hour ( range 00 to 59 )
cc = second of minute( range 00 to 59 )
ddd = thousandths of second (range 000 to 999) | |||||||||||||||||||||
| NhzQtmAlarms | 1.3.6.1.4.1.7262.2.4.7 | ||||||||||||||||||||
| ShzQtmClearAlarmCounters | 1.3.6.1.4.1.7262.2.4.7.1 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current Clears the alarm counters for the specified group
| |||||||||||||||||||||
| NhzQtmSystemAlarms | 1.3.6.1.4.1.7262.2.4.7.2 | ||||||||||||||||||||
| ShzQtmExplicitAuthenticationFailureAlarm | 1.3.6.1.4.1.7262.2.4.7.2.1 | INTEGER | RO | ||||||||||||||||||
scalar · INTEGER · read-only · current Authentication of the peer horizon node has failed. The severity is critical, the probable cause is an incorrect authentication configuration on horizon faulty cable between the modem and radio, and recommended course of action is to check both ends of the link.
| |||||||||||||||||||||
| ShzQtmExplicitAuthenticationFailureCounts | 1.3.6.1.4.1.7262.2.4.7.2.2 | Counter32 | RO | ||||||||||||||||||
scalar · Counter32 · read-only · current Indicates the number of times explicit authentication has failed. | |||||||||||||||||||||
| ShzQtmHitlessAamConfigMismatchAlarm | 1.3.6.1.4.1.7262.2.4.7.2.3 | INTEGER | RO | ||||||||||||||||||
scalar · INTEGER · read-only · current In the near end Hitless Automatic Adaptive Modulation (HAAM) feature set to on and in peer it is set to off
| |||||||||||||||||||||
| ShzQtmHitlessAamConfigMismatchCounts | 1.3.6.1.4.1.7262.2.4.7.2.4 | Counter32 | RO | ||||||||||||||||||
scalar · Counter32 · read-only · current Indicates the approximate number of seconds Hitless AAM Configuration Mismatch alarm has been active. | |||||||||||||||||||||
| ShzQtmHitlessAamActiveAlarm | 1.3.6.1.4.1.7262.2.4.7.2.5 | INTEGER | RO | ||||||||||||||||||
scalar · INTEGER · read-only · current Indicates Hitless AAM is active and system running on lower modulation
| |||||||||||||||||||||
| ShzQtmHitlessAamActiveCounts | 1.3.6.1.4.1.7262.2.4.7.2.6 | Counter32 | RO | ||||||||||||||||||
scalar · Counter32 · read-only · current Indicates the approximate number of seconds Hitless AAM Active alarm has been active. | |||||||||||||||||||||
| ShzQtmSntpServerUnreachableAlarm | 1.3.6.1.4.1.7262.2.4.7.2.7 | INTEGER | RO | ||||||||||||||||||
scalar · INTEGER · read-only · current All of the SNTP servers are not available.
| |||||||||||||||||||||
| ShzQtmSntpServerUnreachableCounts | 1.3.6.1.4.1.7262.2.4.7.2.8 | Counter32 | RO | ||||||||||||||||||
scalar · Counter32 · read-only · current Indicates how long in seconds all of the SNTP servers are not available. | |||||||||||||||||||||
| ShzQtmFrequencyFileInvalidAlarm | 1.3.6.1.4.1.7262.2.4.7.2.9 | INTEGER | RO | ||||||||||||||||||
scalar · INTEGER · read-only · current Executing frequency file is invalid.
| |||||||||||||||||||||
| ShzQtmFrequencyFileInvalidCounts | 1.3.6.1.4.1.7262.2.4.7.2.10 | Counter32 | RO | ||||||||||||||||||
scalar · Counter32 · read-only · current Indicates the time (in secs) since this alarm exist. | |||||||||||||||||||||
| ShzQtmFanFailureAlarm | 1.3.6.1.4.1.7262.2.4.7.2.11 | INTEGER | RO | ||||||||||||||||||
scalar · INTEGER · read-only · current Indicates whether any of the two Fans have failed.
| |||||||||||||||||||||
| ShzQtmFanFailureCounts | 1.3.6.1.4.1.7262.2.4.7.2.12 | Counter32 | RO | ||||||||||||||||||
scalar · Counter32 · read-only · current Indicates the number of seconds that the fan has failed for. | |||||||||||||||||||||
| ShzQtmRedundancyPrimaryPortNotSetAlarm | 1.3.6.1.4.1.7262.2.4.7.2.13 | INTEGER | RO | ||||||||||||||||||
scalar · INTEGER · read-only · current The redundancy primary port used for redundancy has not been set.
| |||||||||||||||||||||
| ShzQtmRedundancyPrimaryPortNotSetCounts | 1.3.6.1.4.1.7262.2.4.7.2.14 | Counter32 | RO | ||||||||||||||||||
scalar · Counter32 · read-only · current Indicates the approximate number of seconds that this alarm has been active. | |||||||||||||||||||||
| ShzQtmRedundancySecondaryPortActiveAlarm | 1.3.6.1.4.1.7262.2.4.7.2.15 | INTEGER | RO | ||||||||||||||||||
scalar · INTEGER · read-only · current The active wireless port has switched to the secondary wireless port.
| |||||||||||||||||||||
| ShzQtmRedundancySecondaryPortActiveCounts | 1.3.6.1.4.1.7262.2.4.7.2.16 | Counter32 | RO | ||||||||||||||||||
scalar · Counter32 · read-only · current Indicates the approximate number of seconds that this alarm has been active. | |||||||||||||||||||||
| ShzQtmRedundancyPrimaryPortFaultyAlarm | 1.3.6.1.4.1.7262.2.4.7.2.17 | INTEGER | RO | ||||||||||||||||||
scalar · INTEGER · read-only · current The redundancy primary wireless port is faulty.
| |||||||||||||||||||||
| ShzQtmRedundancyPrimaryPortFaultyCounts | 1.3.6.1.4.1.7262.2.4.7.2.18 | Counter32 | RO | ||||||||||||||||||
scalar · Counter32 · read-only · current Indicates the approximate number of seconds that this alarm has been active. | |||||||||||||||||||||
| ShzQtmRedundancySecondaryPortFaultyAlarm | 1.3.6.1.4.1.7262.2.4.7.2.19 | INTEGER | RO | ||||||||||||||||||
scalar · INTEGER · read-only · current The redundancy secondary wireless port is faulty.
| |||||||||||||||||||||
| ShzQtmRedundancySecondaryPortFaultyCounts | 1.3.6.1.4.1.7262.2.4.7.2.20 | Counter32 | RO | ||||||||||||||||||
scalar · Counter32 · read-only · current Indicates the approximate number of seconds that this alarm has been active. | |||||||||||||||||||||
| ShzQtmAtpcConfigMismatchAlarm | 1.3.6.1.4.1.7262.2.4.7.2.21 | INTEGER | RO | ||||||||||||||||||
scalar · INTEGER · read-only · current In the near end ATPC feature is set to on and in peer it is set to off.
| |||||||||||||||||||||
| ShzQtmAtpcConfigMismatchCounts | 1.3.6.1.4.1.7262.2.4.7.2.22 | Counter32 | RO | ||||||||||||||||||
scalar · Counter32 · read-only · current Indicates the approximate number of seconds AtpcConfigMismatch alarm has been active. | |||||||||||||||||||||
| ShzQtmDroppedEnetFramesThresholdAlarm | 1.3.6.1.4.1.7262.2.4.7.2.23 | INTEGER | RO | ||||||||||||||||||
scalar · INTEGER · read-only · current The threshold for number of frames dropped has been exceeded. The threshold and the number of seconds that it must exceed this threshold are programmed by the user.
| |||||||||||||||||||||
| ShzQtmDroppedEnetFramesThresholdCounts | 1.3.6.1.4.1.7262.2.4.7.2.24 | Counter32 | RO | ||||||||||||||||||
scalar · Counter32 · read-only · current Indicates the approximate time, in seconds, that this alarm has been in the active state | |||||||||||||||||||||
| ShzQtmBandwidthUtilizationThresholdAlarm | 1.3.6.1.4.1.7262.2.4.7.2.25 | INTEGER | RO | ||||||||||||||||||
scalar · INTEGER · read-only · current The threshold for the percentage of available bandwidth has been exceeded. The threshold and the number of seconds that it must exceed this threshold are programmed by the user.
| |||||||||||||||||||||
| ShzQtmBandwidthUtilizationThresholdCounts | 1.3.6.1.4.1.7262.2.4.7.2.26 | Counter32 | RO | ||||||||||||||||||
scalar · Counter32 · read-only · current Indicates the approximate time, in seconds, that this alarm has been in the active state | |||||||||||||||||||||
| ShzQtmRlsMismatchAlarm | 1.3.6.1.4.1.7262.2.4.7.2.27 | INTEGER | RO | ||||||||||||||||||
scalar · INTEGER · read-only · current RLS configurations on the pair of systems are mismatched.
| |||||||||||||||||||||
| ShzQtmRlsMismatchCounts | 1.3.6.1.4.1.7262.2.4.7.2.28 | Counter32 | RO | ||||||||||||||||||
scalar · Counter32 · read-only · current Indicates the approximate time, in seconds, that this alarm has been in the active state | |||||||||||||||||||||
| ShzQtmRLSQueueBasedShutdownActivatedAlarm | 1.3.6.1.4.1.7262.2.4.7.2.29 | INTEGER | RO | ||||||||||||||||||
scalar · INTEGER · read-only · current RLS Queue-Based shutdown is activated.
| |||||||||||||||||||||
| ShzQtmRLSQueueBasedShutdownActivatedCounts | 1.3.6.1.4.1.7262.2.4.7.2.30 | Counter32 | RO | ||||||||||||||||||
scalar · Counter32 · read-only · current Indicates the approximate time, in seconds, that this alarm has been in the active state | |||||||||||||||||||||
| ShzQtmFpgaProgrammingErrorAlarm | 1.3.6.1.4.1.7262.2.4.7.2.31 | INTEGER | RO | ||||||||||||||||||
scalar · INTEGER · read-only · current Encountered some problem while programming the modem.
| |||||||||||||||||||||
| ShzQtmFpgaProgrammingErrorCounts | 1.3.6.1.4.1.7262.2.4.7.2.32 | Counter32 | RO | ||||||||||||||||||
scalar · Counter32 · read-only · current Indicates the approximate number of seconds that this alarm has been active. | |||||||||||||||||||||
| ShzQtmMibChangeNotSavedAlarm | 1.3.6.1.4.1.7262.2.4.7.2.33 | INTEGER | RO | ||||||||||||||||||
scalar · INTEGER · read-only · current The system has automatically re-programmed the mib. It requires a save mib action to save the changes to flash, otherwise the changes will be lost on reset. View the logs to see what was modified in the mib.
| |||||||||||||||||||||
| ShzQtmMibChangeNotSavedCounts | 1.3.6.1.4.1.7262.2.4.7.2.34 | Counter32 | RO | ||||||||||||||||||
scalar · Counter32 · read-only · current Indicates the approximate number of seconds that this alarm has been active. | |||||||||||||||||||||
| ShzQtmBadSystemConfigurationAlarm | 1.3.6.1.4.1.7262.2.4.7.2.35 | INTEGER | RO | ||||||||||||||||||
scalar · INTEGER · read-only · current The system has been configured incorrectly. Check the logs or use the CLI get alarms to isolate the cause.
| |||||||||||||||||||||
| ShzQtmBadSystemConfigurationCounts | 1.3.6.1.4.1.7262.2.4.7.2.36 | Counter32 | RO | ||||||||||||||||||
scalar · Counter32 · read-only · current Indicates the approximate number of seconds that this alarm has been active. | |||||||||||||||||||||
| ShzQtmPartnerNodeAlarm | 1.3.6.1.4.1.7262.2.4.7.2.37 | INTEGER | RO | ||||||||||||||||||
scalar · INTEGER · read-only · current Failed to establish communication or configuration mismatch with the partner node. Check the logs or use the CLI get alarms to isolate the cause.s
| |||||||||||||||||||||
| ShzQtmPartnerNodeAlarmCounts | 1.3.6.1.4.1.7262.2.4.7.2.38 | Counter32 | RO | ||||||||||||||||||
scalar · Counter32 · read-only · current Indicates the approximate number of seconds that this alarm has been active. | |||||||||||||||||||||
| ShzQtmBandwidthDoublingInvalidLinkConfigAlarm | 1.3.6.1.4.1.7262.2.4.7.2.39 | INTEGER | RO | ||||||||||||||||||
scalar · INTEGER · read-only · current Bandwidth doubling link is configured wong. i.e., Primary is synchronized with remote primary, and secondary is sychronized with remote secondary.
| |||||||||||||||||||||
| ShzQtmBandwidthDoublingInvalidLinkConfigCounts | 1.3.6.1.4.1.7262.2.4.7.2.40 | Counter32 | RO | ||||||||||||||||||
scalar · Counter32 · read-only · current Indicates the approximate number of seconds that this alarm has been active. | |||||||||||||||||||||
| ShzQtmBandwidthDoublingWrongPortConnectedAlarm | 1.3.6.1.4.1.7262.2.4.7.2.41 | INTEGER | RO | ||||||||||||||||||
scalar · INTEGER · read-only · current Bandwidth doubling wrong port is connected to local partner.
| |||||||||||||||||||||
| ShzQtmBandwidthDoublingWrongPortConnectedCount | 1.3.6.1.4.1.7262.2.4.7.2.42 | Counter32 | RO | ||||||||||||||||||
scalar · Counter32 · read-only · current Indicates the approximate number of seconds that this alarm has been active. | |||||||||||||||||||||
| ShzQtmSynceLostLockAlarm | 1.3.6.1.4.1.7262.2.4.7.2.43 | INTEGER | RO | ||||||||||||||||||
scalar · INTEGER · read-only · current SyncE feature is currently out of lock.
| |||||||||||||||||||||
| ShzQtmSynceLostLockCount | 1.3.6.1.4.1.7262.2.4.7.2.44 | Counter32 | RO | ||||||||||||||||||
scalar · Counter32 · read-only · current Indicates the approximate number of seconds that this alarm has been active. | |||||||||||||||||||||
| ShzQtmSynceSecondarySourceInUseAlarm | 1.3.6.1.4.1.7262.2.4.7.2.45 | INTEGER | RO | ||||||||||||||||||
scalar · INTEGER · read-only · current SyncE feature is synchronized to secondary clock source.
| |||||||||||||||||||||
| ShzQtmSynceSecondarySourceInUseCount | 1.3.6.1.4.1.7262.2.4.7.2.46 | Counter32 | RO | ||||||||||||||||||
scalar · Counter32 · read-only · current Indicates the approximate number of seconds that this alarm has been active. | |||||||||||||||||||||
| NhzQtmNetworkInterfaceAlarms | 1.3.6.1.4.1.7262.2.4.7.3 | ||||||||||||||||||||
| ThzQtmEnetPortAlarmsTable | 1.3.6.1.4.1.7262.2.4.7.3.1 | NA | |||||||||||||||||||
| RhzQtmEnetPortAlarmsEntry | 1.3.6.1.4.1.7262.2.4.7.3.1.1 | NA | |||||||||||||||||||
row · not-accessible · current | |||||||||||||||||||||
| ChzQtmEnetPortAlarmsIndex | 1.3.6.1.4.1.7262.2.4.7.3.1.1.1 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current
| |||||||||||||||||||||
| ChzQtmEnetPortEthernetLinkDownAlarm | 1.3.6.1.4.1.7262.2.4.7.3.1.1.2 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Indicates whether the Ethernet link is down or not. The severity is major, the probable cause is an incorrect configuration of the switch or router connected to horizon. The recommended course of action is to check the connection.
| |||||||||||||||||||||
| ChzQtmEnetPortEthernetLinkDownCounts | 1.3.6.1.4.1.7262.2.4.7.3.1.1.3 | Counter32 | RO | ||||||||||||||||||
column · Counter32 · read-only · current Indicates the approximate time, in seconds, that this alarm has been in the active state | |||||||||||||||||||||
| NhzQtmWirelessInterfaceAlarms | 1.3.6.1.4.1.7262.2.4.7.4 | ||||||||||||||||||||
| NhzQtmModemAlarms | 1.3.6.1.4.1.7262.2.4.7.4.1 | ||||||||||||||||||||
| ThzQtmModemAlarmsTable | 1.3.6.1.4.1.7262.2.4.7.4.1.1 | NA | |||||||||||||||||||
table · not-accessible · current A table of Modem Alarms. | |||||||||||||||||||||
| RhzQtmModemAlarmsEntry | 1.3.6.1.4.1.7262.2.4.7.4.1.1.1 | NA | |||||||||||||||||||
| ChzQtmModemAlarmsIndex | 1.3.6.1.4.1.7262.2.4.7.4.1.1.1.1 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current A unique value for each interface.
| |||||||||||||||||||||
| ChzQtmModemRxLossOfSignalAlarm | 1.3.6.1.4.1.7262.2.4.7.4.1.1.1.2 | INTEGER | RO | off(1) | |||||||||||||||||
column · INTEGER · read-only · current Loss of signal lock from the demodulator. The severity is critical, the probable cause is lost synchronization with the far end, and recommended course of action is to check the operational state of both ends of the link.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| ChzQtmModemRxLossOfSignalCounts | 1.3.6.1.4.1.7262.2.4.7.4.1.1.1.3 | Counter32 | RO | 0 | |||||||||||||||||
column · Counter32 · read-only · current Indicates the approximate number of seconds that this alarm has been active. Example values from LibreNMS test devices
| |||||||||||||||||||||
| ChzQtmModemTxLossOfSyncAlarm | 1.3.6.1.4.1.7262.2.4.7.4.1.1.1.4 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Loss of sync bytes at the input of the modulator. The severity is critical, the probable cause is physical interference in the air link, and recommended course of action is to check the line of site between the horizon nodes.
| |||||||||||||||||||||
| ChzQtmModemTxLossOfSyncCounts | 1.3.6.1.4.1.7262.2.4.7.4.1.1.1.5 | Counter32 | RO | ||||||||||||||||||
column · Counter32 · read-only · current Indicates the approximate number of seconds that this alarm has been active. | |||||||||||||||||||||
| ChzQtmModemSnrBelowThresholdAlarm | 1.3.6.1.4.1.7262.2.4.7.4.1.1.1.6 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current The demodulator SNR performance worse than programmed levels. The severity is major, the probable cause is physical interference in the air link path or misalignment of the radios or severe weather conditions, and recommended course of action is to check the line of site between the horizon nodes.
| |||||||||||||||||||||
| ChzQtmModemSnrBelowThresholdCounts | 1.3.6.1.4.1.7262.2.4.7.4.1.1.1.7 | Counter32 | RO | ||||||||||||||||||
column · Counter32 · read-only · current Indicates the approximate number of seconds that this alarm has been active. | |||||||||||||||||||||
| ChzQtmModemEqualizerStressExceedThresholdAlarm | 1.3.6.1.4.1.7262.2.4.7.4.1.1.1.8 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Equalizer Stress measured within the demodulator exceeds the threshold value.
| |||||||||||||||||||||
| ChzQtmModemEquilizerStressExceedThresholdCounts | 1.3.6.1.4.1.7262.2.4.7.4.1.1.1.9 | Counter32 | RO | ||||||||||||||||||
column · Counter32 · read-only · current Indicates the approximate number of seconds that this alarm has been active. | |||||||||||||||||||||
| ChzQtmModemRLSShutdownActivatedAlarm | 1.3.6.1.4.1.7262.2.4.7.4.1.1.1.10 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current RLS shutdown is activated.
| |||||||||||||||||||||
| ChzQtmModemRLSShutdownActivatedCounts | 1.3.6.1.4.1.7262.2.4.7.4.1.1.1.11 | Counter32 | RO | ||||||||||||||||||
column · Counter32 · read-only · current Indicates the approximate time, in seconds, that this alarm has been in the active state | |||||||||||||||||||||
| ChzQtmModemXPICEquStressExceedThresholdAlarm | 1.3.6.1.4.1.7262.2.4.7.4.1.1.1.12 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current XPIC Equalizer Stress measured within the demodulator exceeds the threshold value.
| |||||||||||||||||||||
| ChzQtmModemXPICEquStressExceedThresholdCounts | 1.3.6.1.4.1.7262.2.4.7.4.1.1.1.13 | Counter32 | RO | ||||||||||||||||||
column · Counter32 · read-only · current Indicates the approximate number of seconds that this alarm has been active. | |||||||||||||||||||||
| NhzQtmRadioAlarms | 1.3.6.1.4.1.7262.2.4.7.4.2 | ||||||||||||||||||||
| ThzQtmRadioAlarmsTable | 1.3.6.1.4.1.7262.2.4.7.4.2.1 | NA | |||||||||||||||||||
table · not-accessible · current A table of Radio Alarms. | |||||||||||||||||||||
| RhzQtmRadioAlarmsEntry | 1.3.6.1.4.1.7262.2.4.7.4.2.1.1 | NA | |||||||||||||||||||
| ChzQtmRadioAlarmsIndex | 1.3.6.1.4.1.7262.2.4.7.4.2.1.1.1 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current A unique value for each radio interface.
| |||||||||||||||||||||
| ChzQtmRadioSynthLostLockAlarm | 1.3.6.1.4.1.7262.2.4.7.4.2.1.1.2 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current The radio synthesizer has lost lock. The severity is critical, the probable cause is a faulty radio and recommended course of action is to replace the radio unit.
| |||||||||||||||||||||
| ChzQtmRadioSynthLostLockCounts | 1.3.6.1.4.1.7262.2.4.7.4.2.1.1.3 | Counter32 | RO | ||||||||||||||||||
column · Counter32 · read-only · current Indicates the approximate number of seconds that this alarm has been active. | |||||||||||||||||||||
| ChzQtmRadioLostCommunicationAlarm | 1.3.6.1.4.1.7262.2.4.7.4.2.1.1.4 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current RS232 communication lost between IDU and the radio. The severity is critical, the probable cause is a faulty cable between the modem and radio, and recommended course of action is to check the connection.
| |||||||||||||||||||||
| ChzQtmRadioLostCommunicationCounts | 1.3.6.1.4.1.7262.2.4.7.4.2.1.1.5 | Counter32 | RO | ||||||||||||||||||
column · Counter32 · read-only · current Indicates the approximate number of seconds that this alarm has been active. | |||||||||||||||||||||
| ChzQtmRadioMismatchAlarm | 1.3.6.1.4.1.7262.2.4.7.4.2.1.1.6 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current The radio connected to the IDU modem does not match the frequency programmed into the modem unit. The severity is major, the probable cause is an incorrectly programmed modem or an incorrect radio type connected to the modem, and recommended course of action is to check the modem frequency settings and radio hardware version number or serial number.
| |||||||||||||||||||||
| ChzQtmRadioMismatchCounts | 1.3.6.1.4.1.7262.2.4.7.4.2.1.1.7 | Counter32 | RO | ||||||||||||||||||
column · Counter32 · read-only · current Indicates the approximate number of seconds that this alarm has been active. | |||||||||||||||||||||
| ChzQtmRadioPowerAmpAlarm | 1.3.6.1.4.1.7262.2.4.7.4.2.1.1.8 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current The power amplifier on the radio is not operating within normal operating specifications. The severity is critical, the probable cause a faulty radio unit, and recommended course of action is to replace the radio unit.
| |||||||||||||||||||||
| ChzQtmRadioPowerAmpCounts | 1.3.6.1.4.1.7262.2.4.7.4.2.1.1.9 | Counter32 | RO | ||||||||||||||||||
column · Counter32 · read-only · current Indicates the approximate number of seconds that this alarm has been active. | |||||||||||||||||||||
| ChzQtmRadioExcessiveTxCableLossAlarm | 1.3.6.1.4.1.7262.2.4.7.4.2.1.1.10 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current
| |||||||||||||||||||||
| ChzQtmRadioExcessiveTxCableLossCounts | 1.3.6.1.4.1.7262.2.4.7.4.2.1.1.11 | Counter32 | RO | ||||||||||||||||||
column · Counter32 · read-only · current Indicates the approximate number of seconds that this alarm has been active. | |||||||||||||||||||||
| ChzQtmRadioRslBelowThresholdAlarm | 1.3.6.1.4.1.7262.2.4.7.4.2.1.1.12 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current The minimum radio receive signal level threshold has been crossed. The severity is major, the probable cause is physical interference in the air link path or misalignment of the radios or severe weather conditions, and recommended course of action is to check the line of site between the air pair nodes.
| |||||||||||||||||||||
| ChzQtmRadioRslBelowThresholdCounts | 1.3.6.1.4.1.7262.2.4.7.4.2.1.1.13 | Counter32 | RO | ||||||||||||||||||
column · Counter32 · read-only · current Indicates the approximate number of seconds that this alarm has been active. | |||||||||||||||||||||
| ChzQtmRadioHighPowerTxDetectorAlarm | 1.3.6.1.4.1.7262.2.4.7.4.2.1.1.14 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current This applies to High Power Radios only. Indicates minimum power threshold has not been surpassed.
| |||||||||||||||||||||
| ChzQtmRadioHighPowerTxDetectorCounts | 1.3.6.1.4.1.7262.2.4.7.4.2.1.1.15 | Counter32 | RO | ||||||||||||||||||
column · Counter32 · read-only · current Indicates the approximate number of seconds that this alarm has been active. | |||||||||||||||||||||
| ChzQtmRadioRedundancySerialNumMismatchAlarm | 1.3.6.1.4.1.7262.2.4.7.4.2.1.1.16 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current The radio serial number programmed in flash and radio do not match.
| |||||||||||||||||||||
| ChzQtmRadioRedundancySerialNumMismatchCounts | 1.3.6.1.4.1.7262.2.4.7.4.2.1.1.17 | Counter32 | RO | ||||||||||||||||||
column · Counter32 · read-only · current Indicates the approximate number of seconds that this alarm has been active. | |||||||||||||||||||||
| ChzQtmRadioExcessiveTxCableLossChangeAlarm | 1.3.6.1.4.1.7262.2.4.7.4.2.1.1.18 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Cable loss change exceeds the threshold.
| |||||||||||||||||||||
| ChzQtmRadioExcessiveTxCableLossChangeCounts | 1.3.6.1.4.1.7262.2.4.7.4.2.1.1.19 | Counter32 | RO | ||||||||||||||||||
column · Counter32 · read-only · current Indicates the approximate number of seconds that this alarm has been active. | |||||||||||||||||||||
| ChzQtmRadioExcessiveRxCableLossAlarm | 1.3.6.1.4.1.7262.2.4.7.4.2.1.1.20 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Rx gain can not be adjusted to desired value.
| |||||||||||||||||||||
| ChzQtmRadioExcessiveRxCableLossCounts | 1.3.6.1.4.1.7262.2.4.7.4.2.1.1.21 | Counter32 | RO | ||||||||||||||||||
column · Counter32 · read-only · current Indicates the approximate number of seconds that this alarm has been active. | |||||||||||||||||||||
| ChzQtmRadioAtpcTxAtMaxPowerAlarm | 1.3.6.1.4.1.7262.2.4.7.4.2.1.1.22 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current ATPC auto-disabled (transmitting at coordinated power).
| |||||||||||||||||||||
| ChzQtmRadioAtpcTxAtMaxPowerCounts | 1.3.6.1.4.1.7262.2.4.7.4.2.1.1.23 | Counter32 | RO | ||||||||||||||||||
column · Counter32 · read-only · current Indicates the approximate number of seconds that this alarm has been active. | |||||||||||||||||||||
| ChzQtmRadioSwDownloadFailedAlarm | 1.3.6.1.4.1.7262.2.4.7.4.2.1.1.24 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Radio is failing to download the software on startup.
| |||||||||||||||||||||
| ChzQtmRadioSwDownloadFailedCounts | 1.3.6.1.4.1.7262.2.4.7.4.2.1.1.25 | Counter32 | RO | ||||||||||||||||||
column · Counter32 · read-only · current Indicates the approximate number of seconds that this alarm has been active. | |||||||||||||||||||||
| ChzQtmRadioDrainCurrentAlarm | 1.3.6.1.4.1.7262.2.4.7.4.2.1.1.26 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current The drain current on the radio is not operating within normal operating specifications. The severity is critical, the probable cause a faulty radio unit, and recommended course of action is to replace the radio unit.
| |||||||||||||||||||||
| ChzQtmRadioDrainCurrentCounts | 1.3.6.1.4.1.7262.2.4.7.4.2.1.1.27 | Counter32 | RO | ||||||||||||||||||
| ChzQtmRadioPowerOffAlarm | 1.3.6.1.4.1.7262.2.4.7.4.2.1.1.28 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Radio power is off (potential IF cable short detection).
| |||||||||||||||||||||
| ChzQtmRadioPowerOffCounts | 1.3.6.1.4.1.7262.2.4.7.4.2.1.1.29 | Counter32 | RO | ||||||||||||||||||
column · Counter32 · read-only · current Indicates the approximate number of seconds that this alarm has been active. | |||||||||||||||||||||
| NhzQtmIFAlarms | 1.3.6.1.4.1.7262.2.4.7.4.3 | ||||||||||||||||||||
| ThzQtmIFAlarmsTable | 1.3.6.1.4.1.7262.2.4.7.4.3.1 | NA | |||||||||||||||||||
table · not-accessible · current A table of IF Alarms. | |||||||||||||||||||||
| RhzQtmIFAlarmsEntry | 1.3.6.1.4.1.7262.2.4.7.4.3.1.1 | NA | |||||||||||||||||||
| ChzQtmIFAlarmsIndex | 1.3.6.1.4.1.7262.2.4.7.4.3.1.1.1 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current A unique value for each IF path.
| |||||||||||||||||||||
| ChzQtmIFLostLockAlarm | 1.3.6.1.4.1.7262.2.4.7.4.3.1.1.2 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current The IF synthesizer has lost lock.
| |||||||||||||||||||||
| ChzQtmIFLostLockCounts | 1.3.6.1.4.1.7262.2.4.7.4.3.1.1.3 | Counter32 | RO | ||||||||||||||||||
column · Counter32 · read-only · current Indicates the approximate number of seconds that this alarm has been active. | |||||||||||||||||||||
| NhzQtmTrapConfig | 1.3.6.1.4.1.7262.2.4.8 | ||||||||||||||||||||
| ThzQtmSnmpTrapHostTable | 1.3.6.1.4.1.7262.2.4.8.1 | NA | |||||||||||||||||||
table · not-accessible · current Table containing SNMP trap host entries. | |||||||||||||||||||||
| RhzQtmSnmpTrapHostEntry | 1.3.6.1.4.1.7262.2.4.8.1.1 | NA | |||||||||||||||||||
row · not-accessible · current The snmp trap host entry containing all the trap host information | |||||||||||||||||||||
| ChzQtmSnmpTrapHostIndex | 1.3.6.1.4.1.7262.2.4.8.1.1.1 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current A unique value for each trap host. | |||||||||||||||||||||
| ChzQtmSnmpTrapHostMode | 1.3.6.1.4.1.7262.2.4.8.1.1.2 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Indicates how the snmp trap host is obtained for the system.
| |||||||||||||||||||||
| ChzQtmSnmpTrapHostIpAddress | 1.3.6.1.4.1.7262.2.4.8.1.1.3 | IpAddress | RO | ||||||||||||||||||
column · IpAddress · read-only · current Indicates snmp trap host IP address. | |||||||||||||||||||||
| ChzQtmSnmpTrapHostCommunityName | 1.3.6.1.4.1.7262.2.4.8.1.1.4 | DisplayString (SIZE (0..24)) | RO | ||||||||||||||||||
column · DisplayString (SIZE (0..24)) · read-only · current The community string name used in Traps. | |||||||||||||||||||||
| ChzQtmSnmpTrapHostActivated | 1.3.6.1.4.1.7262.2.4.8.1.1.5 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Specifies whether traps are to be sent to this specific host or not
| |||||||||||||||||||||
| ThzQtmSnmpV3TrapHostsTable | 1.3.6.1.4.1.7262.2.4.8.2 | NA | |||||||||||||||||||
table · not-accessible · current Table containing snmp V3 trap host entries | |||||||||||||||||||||
| RhzQtmSnmpV3TrapHostsEntry | 1.3.6.1.4.1.7262.2.4.8.2.1 | NA | |||||||||||||||||||
row · not-accessible · current Contains the snmp v3 trap host information | |||||||||||||||||||||
| ChzQtmSnmpV3TrapHostsIndex | 1.3.6.1.4.1.7262.2.4.8.2.1.1 | Integer32 (0..4) | RO | ||||||||||||||||||
column · Integer32 (0..4) · read-only · current A unique value for each v3 trap host. | |||||||||||||||||||||
| CsnmpV3TrapHostIpAddress | 1.3.6.1.4.1.7262.2.4.8.2.1.2 | IpAddress | RO | ||||||||||||||||||
column · IpAddress · read-only · current Indicates snmp trap host IP address. | |||||||||||||||||||||
| CsnmpV3TrapHostUserName | 1.3.6.1.4.1.7262.2.4.8.2.1.3 | DisplayString (SIZE (0..24)) | RO | ||||||||||||||||||
column · DisplayString (SIZE (0..24)) · read-only · current The user name of the v3 trap host. | |||||||||||||||||||||
| CsnmpV3TrapHostAuthProtocol | 1.3.6.1.4.1.7262.2.4.8.2.1.4 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current The authentication alogorithm used by the v3 trap host.
| |||||||||||||||||||||
| CsnmpV3TrapHostAuthPassword | 1.3.6.1.4.1.7262.2.4.8.2.1.5 | DisplayString (SIZE (0..24)) | RO | ||||||||||||||||||
column · DisplayString (SIZE (0..24)) · read-only · current The authentication password of the v3 trap host. | |||||||||||||||||||||
| CsnmpV3TrapHostPrivProtocol | 1.3.6.1.4.1.7262.2.4.8.2.1.6 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current The privacy encryption alogorithm used by the v3 trap host.
| |||||||||||||||||||||
| CsnmpV3TrapHostPrivPassword | 1.3.6.1.4.1.7262.2.4.8.2.1.7 | DisplayString (SIZE (0..24)) | RO | ||||||||||||||||||
column · DisplayString (SIZE (0..24)) · read-only · current The privacy password of the v3 trap host. | |||||||||||||||||||||
| CsnmpV3TrapHostActivated | 1.3.6.1.4.1.7262.2.4.8.2.1.8 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Specifies whether a specific v3 trap host is allowed to access the system
| |||||||||||||||||||||
| NhzQtmTrapEnable | 1.3.6.1.4.1.7262.2.4.8.3 | ||||||||||||||||||||
| ShzQtmColdStartTrap | 1.3.6.1.4.1.7262.2.4.8.3.1 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current Specifies whether this trap is to be sent or not.
| |||||||||||||||||||||
| ShzQtmLinkDownTrap | 1.3.6.1.4.1.7262.2.4.8.3.2 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current Specifies whether this trap is to be sent or not.
| |||||||||||||||||||||
| ShzQtmLinkUpTrap | 1.3.6.1.4.1.7262.2.4.8.3.3 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current Specifies whether this trap is to be sent or not.
| |||||||||||||||||||||
| ShzQtmExplicitAuthenticationFailureTrap | 1.3.6.1.4.1.7262.2.4.8.3.4 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current Specifies whether this trap is to be sent or not.
| |||||||||||||||||||||
| ShzQtmHitlessAamConfigMismatchTrap | 1.3.6.1.4.1.7262.2.4.8.3.5 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current Enables or disables the Hitless Aam ConfigMismatch trap.
| |||||||||||||||||||||
| ShzQtmHitlessAamActiveTrap | 1.3.6.1.4.1.7262.2.4.8.3.6 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current Enables or disables the Hitless AAM Active trap.
| |||||||||||||||||||||
| ShzQtmAtpcConfigMismatchTrap | 1.3.6.1.4.1.7262.2.4.8.3.7 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current Enables or disables the trap.
| |||||||||||||||||||||
| ShzQtmSntpServersUnreachableTrap | 1.3.6.1.4.1.7262.2.4.8.3.8 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current Enables or disables the trap.
| |||||||||||||||||||||
| ShzQtmFrequencyFileInvalidTrap | 1.3.6.1.4.1.7262.2.4.8.3.9 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current Enables or disables the trap.
| |||||||||||||||||||||
| ShzQtmEnetPortDroppedFramesThresholdExceedTrap | 1.3.6.1.4.1.7262.2.4.8.3.10 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current Enables or disables the trap.
| |||||||||||||||||||||
| ShzQtmEnetPortBandwidthUtilizationThresholdExceedTrap | 1.3.6.1.4.1.7262.2.4.8.3.11 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current Enables or disables the trap.
| |||||||||||||||||||||
| ShzQtmEnetPortRlsMismatchTrap | 1.3.6.1.4.1.7262.2.4.8.3.12 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current Enables or disables the trap.
| |||||||||||||||||||||
| ShzQtmRLSQueueBasedShutdownActivatedTrap | 1.3.6.1.4.1.7262.2.4.8.3.13 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current Enables or disables the Queue-Based RLS Shutdown trap.
| |||||||||||||||||||||
| ShzQtmModemRxLossOfSignalLockTrap | 1.3.6.1.4.1.7262.2.4.8.3.14 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current Specifies whether this trap is to be sent or not.
| |||||||||||||||||||||
| ShzQtmModemTxLossOfSyncTrap | 1.3.6.1.4.1.7262.2.4.8.3.15 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current Specifies whether this trap is to be sent or not.
| |||||||||||||||||||||
| ShzQtmModemSnrBelowThresholdTrap | 1.3.6.1.4.1.7262.2.4.8.3.16 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current Specifies whether this trap is to be sent or not.
| |||||||||||||||||||||
| ShzQtmModemEqualizerStressExceedThresholdTrap | 1.3.6.1.4.1.7262.2.4.8.3.17 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current Specifies whether this trap is to be sent or not.
| |||||||||||||||||||||
| ShzQtmModemChannelizedRslBelowThresholdTrap | 1.3.6.1.4.1.7262.2.4.8.3.18 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current Enables or disables the trap.
| |||||||||||||||||||||
| ShzQtmFpgaProgrammingErrorTrap | 1.3.6.1.4.1.7262.2.4.8.3.19 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current Specifies whether this trap is to be sent or not.
| |||||||||||||||||||||
| ShzQtmUserManagementSessionCommencedTrap | 1.3.6.1.4.1.7262.2.4.8.3.20 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current Specifies whether this trap is to be sent or not.
| |||||||||||||||||||||
| ShzQtmUserManagementSessionTerminatedTrap | 1.3.6.1.4.1.7262.2.4.8.3.21 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current Specifies whether this trap is to be sent or not.
| |||||||||||||||||||||
| ShzQtmAtpcTxAtMaxPwrTrap | 1.3.6.1.4.1.7262.2.4.8.3.22 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current Specifies whether this trap is to be sent or not.
| |||||||||||||||||||||
| ShzQtmRadioSynthLostLockTrap | 1.3.6.1.4.1.7262.2.4.8.3.23 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current Specifies whether this trap is to be sent or not.
| |||||||||||||||||||||
| ShzQtmRadioLostCommunicationTrap | 1.3.6.1.4.1.7262.2.4.8.3.24 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current Specifies whether this trap is to be sent or not.
| |||||||||||||||||||||
| ShzQtmRadioMismatchTrap | 1.3.6.1.4.1.7262.2.4.8.3.25 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current Specifies whether this trap is to be sent or not.
| |||||||||||||||||||||
| ShzQtmRadioPowerAmpTrap | 1.3.6.1.4.1.7262.2.4.8.3.26 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current Specifies whether this trap is to be sent or not.
| |||||||||||||||||||||
| ShzQtmRadioExcessiveTxCableLossTrap | 1.3.6.1.4.1.7262.2.4.8.3.27 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current Specifies whether this trap is to be sent or not.
| |||||||||||||||||||||
| ShzQtmHiPowerRadioTxDetectorTrap | 1.3.6.1.4.1.7262.2.4.8.3.28 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current Specifies whether this trap is to be sent or not.
| |||||||||||||||||||||
| ShzQtmSecondaryRadioIsActiveTrap | 1.3.6.1.4.1.7262.2.4.8.3.29 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current Specifies whether this trap is to be sent or not.
| |||||||||||||||||||||
| ShzQtmRedundancySerialNumberMisMatchTrap | 1.3.6.1.4.1.7262.2.4.8.3.30 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current Specifies whether this trap is to be sent or not.
| |||||||||||||||||||||
| ShzQtmRadioFirmwareMismatchTrap | 1.3.6.1.4.1.7262.2.4.8.3.31 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current Specifies whether this trap is to be sent or not.
| |||||||||||||||||||||
| ShzQtmSecondaryRadioNotdetectedTrap | 1.3.6.1.4.1.7262.2.4.8.3.32 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current Specifies whether this trap is to be sent or not.
| |||||||||||||||||||||
| ShzQtmPrimaryRadioNotdetectedTrap | 1.3.6.1.4.1.7262.2.4.8.3.33 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current Specifies whether this trap is to be sent or not.
| |||||||||||||||||||||
| ShzQtmFaultyPrimaryRadioTrap | 1.3.6.1.4.1.7262.2.4.8.3.34 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current Specifies whether this trap is to be sent or not.
| |||||||||||||||||||||
| ShzQtmRadioExcessiveTxCableLossChangeTrap | 1.3.6.1.4.1.7262.2.4.8.3.35 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current Specifies whether this trap is to be sent or not.
| |||||||||||||||||||||
| ShzQtmRadioExcessiveRxCableLossTrap | 1.3.6.1.4.1.7262.2.4.8.3.36 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current Specifies whether this trap is to be sent or not.
| |||||||||||||||||||||
| ShzQtmRedundancyPrimaryPortNotSetTrap | 1.3.6.1.4.1.7262.2.4.8.3.37 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current Specifies whether this trap is to be sent or not.
| |||||||||||||||||||||
| ShzQtmRedundancySecondaryPortIsActiveTrap | 1.3.6.1.4.1.7262.2.4.8.3.38 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current Specifies whether this trap is to be sent or not.
| |||||||||||||||||||||
| ShzQtmRedundancyPrimaryPortFaultyTrap | 1.3.6.1.4.1.7262.2.4.8.3.39 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current Specifies whether this trap is to be sent or not.
| |||||||||||||||||||||
| ShzQtmRedundancySecondaryPortFaultyTrap | 1.3.6.1.4.1.7262.2.4.8.3.40 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current Specifies whether this trap is to be sent or not.
| |||||||||||||||||||||
| ShzQtmFanFailedTrap | 1.3.6.1.4.1.7262.2.4.8.3.41 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current Specifies whether this trap is to be sent or not.
| |||||||||||||||||||||
| ShzQtmModemRlsShutdownActivatedTrap | 1.3.6.1.4.1.7262.2.4.8.3.42 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current Enables or disables the RLS Shutdown trap.
| |||||||||||||||||||||
| ShzQtmRadioUnitHwChangedTrap | 1.3.6.1.4.1.7262.2.4.8.3.43 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current Enables or disables the Radio Unit Hardware changed trap.
| |||||||||||||||||||||
| ShzQtmRadioSwDownloadFailedTrap | 1.3.6.1.4.1.7262.2.4.8.3.44 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current Enables or disables the Radio software download failure trap.
| |||||||||||||||||||||
| ShzQtmRadioRestartedOKTrap | 1.3.6.1.4.1.7262.2.4.8.3.45 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current Enables or disables the Radio restarted OK trap.
| |||||||||||||||||||||
| ShzQtmMibChangeNotSavedTrap | 1.3.6.1.4.1.7262.2.4.8.3.46 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current Enables or disables the 'Mib changed not saved' trap.
| |||||||||||||||||||||
| ShzQtmRadioDrainCurrentTrap | 1.3.6.1.4.1.7262.2.4.8.3.47 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current Enables or disables the Radio Drain Current trap.
| |||||||||||||||||||||
| ShzQtmIFLostLockTrap | 1.3.6.1.4.1.7262.2.4.8.3.48 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current Enables or disables the 'IF Synthesizer Lost Lock' trap.
| |||||||||||||||||||||
| ShzQtmInvalidSystemConfigurationTrap | 1.3.6.1.4.1.7262.2.4.8.3.49 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current Enables or disables the Invalid System Configuration trap.
| |||||||||||||||||||||
| ShzQtmHitlessAamEventTrap | 1.3.6.1.4.1.7262.2.4.8.3.50 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current Enables or disables the Hitless AAM Event trap.
| |||||||||||||||||||||
| ShzQtmModemXPICEqualizerStressExceedThresholdTrap | 1.3.6.1.4.1.7262.2.4.8.3.51 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current Specifies whether this trap is to be sent or not.
| |||||||||||||||||||||
| ShzQtmPartnerNodeAlarmTrap | 1.3.6.1.4.1.7262.2.4.8.3.52 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current Enables or disables the Partner node trap.
| |||||||||||||||||||||
| ShzQtmBandwidthDoublingInvalidLinkConfigTrap | 1.3.6.1.4.1.7262.2.4.8.3.53 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current Enables or disables the bandwidth doubling invalid link configuration trap
| |||||||||||||||||||||
| ShzQtmBandwidthDoublingWrongPortConnectedTrap | 1.3.6.1.4.1.7262.2.4.8.3.54 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current Enables or disables the bandwidth doubling wrong link connected trap
| |||||||||||||||||||||
| ShzQtmRadioPowerOffTrap | 1.3.6.1.4.1.7262.2.4.8.3.55 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current Specifies whether this trap is to be sent or not.
| |||||||||||||||||||||
| ShzQtmSynceLostLockTrap | 1.3.6.1.4.1.7262.2.4.8.3.56 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current Enables or disables this trap.
| |||||||||||||||||||||
| ShzQtmSynceSecondarySourceInUseTrap | 1.3.6.1.4.1.7262.2.4.8.3.57 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current Enables or disables this trap.
| |||||||||||||||||||||
| NhzQtmSnmp | 1.3.6.1.4.1.7262.2.4.9 | ||||||||||||||||||||
| ShzQtmSnmpUserAccess | 1.3.6.1.4.1.7262.2.4.9.1 | INTEGER | RO | ||||||||||||||||||
scalar · INTEGER · read-only · current Specifies the user access to the system. If access is set to 'explicitManagers' then only managers with ip addresses set in snmpManagersTable will be able to gain SNMP access to the system. If access is set to 'any' then any manager will be able to gain SNMP access to the system
| |||||||||||||||||||||
| ShzQtmSnmpManagerAnyCommunityName | 1.3.6.1.4.1.7262.2.4.9.2 | DisplayString (SIZE (0..24)) | RO | ||||||||||||||||||
scalar · DisplayString (SIZE (0..24)) · read-only · current The community string name used by the 'any' manager. | |||||||||||||||||||||
| ShzQtmSnmpSetRequests | 1.3.6.1.4.1.7262.2.4.9.3 | INTEGER | RO | ||||||||||||||||||
scalar · INTEGER · read-only · current Indicates whether SNMP SET requests are allowed.
| |||||||||||||||||||||
| ThzQtmSnmpManagersTable | 1.3.6.1.4.1.7262.2.4.9.4 | NA | |||||||||||||||||||
table · not-accessible · current Table containing snmp manager entries | |||||||||||||||||||||
| RhzQtmSnmpManagersEntry | 1.3.6.1.4.1.7262.2.4.9.4.1 | NA | |||||||||||||||||||
| ChzQtmSnmpManagersIndex | 1.3.6.1.4.1.7262.2.4.9.4.1.1 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current A unique value for each manager. | |||||||||||||||||||||
| ChzQtmSnmpManagerIpAddress | 1.3.6.1.4.1.7262.2.4.9.4.1.2 | IpAddress | RO | ||||||||||||||||||
column · IpAddress · read-only · current The IP address of the Manager. | |||||||||||||||||||||
| ChzQtmSnmpManagerCommunityName | 1.3.6.1.4.1.7262.2.4.9.4.1.3 | DisplayString (SIZE (0..24)) | RO | ||||||||||||||||||
column · DisplayString (SIZE (0..24)) · read-only · current The community string name used by the manager. | |||||||||||||||||||||
| ChzQtmSnmpManagerActivated | 1.3.6.1.4.1.7262.2.4.9.4.1.4 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Specifies whether a specific manager is allowed to access the system
| |||||||||||||||||||||
| ThzQtmSnmpV3ManagersTable | 1.3.6.1.4.1.7262.2.4.9.5 | NA | |||||||||||||||||||
table · not-accessible · current Table containing snmp V3 manager entries | |||||||||||||||||||||
| RhzQtmSnmpV3ManagersEntry | 1.3.6.1.4.1.7262.2.4.9.5.1 | NA | |||||||||||||||||||
| ChzQtmSnmpV3ManagersIndex | 1.3.6.1.4.1.7262.2.4.9.5.1.1 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current A unique value for each v3 manager. | |||||||||||||||||||||
| ChzQtmSnmpV3ManagerUserName | 1.3.6.1.4.1.7262.2.4.9.5.1.2 | DisplayString (SIZE (0..24)) | RO | ||||||||||||||||||
column · DisplayString (SIZE (0..24)) · read-only · current The user name of the v3 Manager. | |||||||||||||||||||||
| ChzQtmSnmpV3ManagerAuthProtocol | 1.3.6.1.4.1.7262.2.4.9.5.1.3 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current The authentication alogorithm used by the v3 manager.
| |||||||||||||||||||||
| ChzQtmSnmpV3ManagerAuthPassword | 1.3.6.1.4.1.7262.2.4.9.5.1.4 | DisplayString (SIZE (0..24)) | RO | ||||||||||||||||||
column · DisplayString (SIZE (0..24)) · read-only · current The authentication password of the v3 Manager. | |||||||||||||||||||||
| ChzQtmSnmpV3ManagerPrivProtocol | 1.3.6.1.4.1.7262.2.4.9.5.1.5 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current The privacy encryption alogorithm used by the v3 manager.
| |||||||||||||||||||||
| ChzQtmSnmpV3ManagerPrivPassword | 1.3.6.1.4.1.7262.2.4.9.5.1.6 | DisplayString (SIZE (0..24)) | RO | ||||||||||||||||||
column · DisplayString (SIZE (0..24)) · read-only · current The privacy password of the v3 Manager. | |||||||||||||||||||||
| ChzQtmSnmpV3ManagerActivated | 1.3.6.1.4.1.7262.2.4.9.5.1.7 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Specifies whether a specific v3 manager is allowed to access the system
| |||||||||||||||||||||
| NhzQtmManagementSessions | 1.3.6.1.4.1.7262.2.4.10 | ||||||||||||||||||||
| ThzQtmUserSessionUserTable | 1.3.6.1.4.1.7262.2.4.10.1 | NA | |||||||||||||||||||
table · not-accessible · current A table of Wireless Interface Radios | |||||||||||||||||||||
| RhzQtmUserSessionUserEntry | 1.3.6.1.4.1.7262.2.4.10.1.1 | NA | |||||||||||||||||||
| ChzQtmUserSessionUserIndex | 1.3.6.1.4.1.7262.2.4.10.1.1.1 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current A unique value for each user.
| |||||||||||||||||||||
| ChzQtmUserSessionUserName | 1.3.6.1.4.1.7262.2.4.10.1.1.2 | DisplayString (SIZE (0..32)) | RO | ||||||||||||||||||
column · DisplayString (SIZE (0..32)) · read-only · current The username of a management session using Telnet or HTTP. The session state variable must be checked to determine if the management session is currently in progress. | |||||||||||||||||||||
| ChzQtmUserSessionUserConnectionType | 1.3.6.1.4.1.7262.2.4.10.1.1.3 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current Either serial port connection or ethernet connection. Ethernet connection may be through any physical port(s) dedicated to management of the equipment. | |||||||||||||||||||||
| ChzQtmUserSessionUserState | 1.3.6.1.4.1.7262.2.4.10.1.1.4 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current The state of the session. The session is inProgress if the user is currently logged into the system. The session is terminated if the user has logged out of the system.
| |||||||||||||||||||||
| NhzQtmHttp | 1.3.6.1.4.1.7262.2.4.11 | ||||||||||||||||||||
| ShzQtmHttpEnable | 1.3.6.1.4.1.7262.2.4.11.1 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current Indicates whether HTTP is enabled.
| |||||||||||||||||||||
| NhzQtmHttpSecure | 1.3.6.1.4.1.7262.2.4.11.2 | ||||||||||||||||||||
| ShzQtmHttpSecureCertificateStatus | 1.3.6.1.4.1.7262.2.4.11.2.1 | DisplayString (SIZE (0..100)) | RO | ||||||||||||||||||
scalar · DisplayString (SIZE (0..100)) · read-only · current Returns the HTTPS certificate status | |||||||||||||||||||||
| ShzQtmHttpSecureAccessForAdminUsers | 1.3.6.1.4.1.7262.2.4.11.2.2 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current the HTTPS access requirement for Admin user group.
| |||||||||||||||||||||
| ShzQtmHttpSecureAccessForNocUsers | 1.3.6.1.4.1.7262.2.4.11.2.3 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current the HTTPS access requirement for Noc user group.
| |||||||||||||||||||||
| ShzQtmHttpSecureAccessForSuperUsers | 1.3.6.1.4.1.7262.2.4.11.2.4 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current the HTTPS access requirement for Super user group.
| |||||||||||||||||||||
| NhzQtmQos | 1.3.6.1.4.1.7262.2.4.12 | ||||||||||||||||||||
| ShzQtmQosEnable | 1.3.6.1.4.1.7262.2.4.12.1 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current Indicates whether QOS is enabled. If disabled is selected and cos flow mapping is active on Q1, Q2 or Q3, then cos flow mapping will be disabled.
| |||||||||||||||||||||
| ShzQtmCosType | 1.3.6.1.4.1.7262.2.4.12.2 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current Indicates the class of service tag type. Based on the setting Horizon will use the CoS value in the VLAN tag, or Q-in-Q inner VLAN tag, or Q-in-Q outer VLAN tag.
| |||||||||||||||||||||
| ShzQtmCosQinQiTag | 1.3.6.1.4.1.7262.2.4.12.3 | DisplayString | RW | ||||||||||||||||||
scalar · DisplayString · read-write · current Sets the value of the Q-in-Q inner tag. This tag is also used to classify the non-Q-in-Q VLAN. Default value is 0x8100. | |||||||||||||||||||||
| ShzQtmCosQinQoTag | 1.3.6.1.4.1.7262.2.4.12.4 | DisplayString | RW | ||||||||||||||||||
scalar · DisplayString · read-write · current Sets the value of the Q-in-Q outer VLAN tag. Default value is 0x8100. | |||||||||||||||||||||
| ShzQtmCosQueueMapping | 1.3.6.1.4.1.7262.2.4.12.5 | DisplayString (SIZE (15..32)) | RW | ||||||||||||||||||
scalar · DisplayString (SIZE (15..32)) · read-write · current User queue assignments for CoS values 0 to 7. There are 4 coS queues. Their corresponding queue numbers are 1,2, 3, where 1 is the lowest priority queue and 4 is the highest priority queue. CoS to queue mapping example: 1 1 2 2 3 3 4 4. | |||||||||||||||||||||
| ShzQtmCosExpediteQueue | 1.3.6.1.4.1.7262.2.4.12.6 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current This sets the user queue operation mode. (a) In expedite mode, any Queue can be assigned 100% of CIR. Queue 4 is serviced first and queue 1 is servcied last.(b) In non expedite mode, the sum of all CIRs must be equal to 100%. In this mode higher priority queues will be serviced first until that queue is emptied or the defined CIR is reached.
| |||||||||||||||||||||
| ShzQtmCosQueueCIR | 1.3.6.1.4.1.7262.2.4.12.7 | DisplayString (SIZE (0..32)) | RW | ||||||||||||||||||
scalar · DisplayString (SIZE (0..32)) · read-write · current Committed Information Rate (CIR) assignments for CoS queues 1 to 4. CIR is assigned as the percentage of system current speed. When expedite queue is enabled any queue can be assigned 100% bandwidth. When expedite queue is disabled the sum of CIR of all queues should be 100. | |||||||||||||||||||||
| ShzQtmCosQueueCBS | 1.3.6.1.4.1.7262.2.4.12.8 | DisplayString (SIZE (0..32)) | RW | ||||||||||||||||||
scalar · DisplayString (SIZE (0..32)) · read-write · current Comitted Burst Size (CBS) for CoS queues 1 to 4 and queue C. CBS is the percentage of total packet buffer size. The sum of CBS's of all 5 queues must be equal to 100. Minimum CBS assignable to any queue is 1. | |||||||||||||||||||||
| ShzQtmCosDefaultValue | 1.3.6.1.4.1.7262.2.4.12.9 | Integer32 (0..7) | RW | ||||||||||||||||||
scalar · Integer32 (0..7) · read-write · current Default CoS value assigned to the ethernet frames that don't have VLAN or Q-in-Q tag. | |||||||||||||||||||||
| ShzQtmQosPolicy | 1.3.6.1.4.1.7262.2.4.12.10 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current Sets the Qos policy.
| |||||||||||||||||||||
| ShzQtmCosWfqWeight | 1.3.6.1.4.1.7262.2.4.12.11 | DisplayString (SIZE (0..32)) | RW | ||||||||||||||||||
scalar · DisplayString (SIZE (0..32)) · read-write · current The weight assigned to each of the 4 cos queue. The wireless bandwidth is distributed amongst the
queues proportional to their weight.
The weights have values from 0-15, where 0 is the lowest weight and
15 is the highest weight.
Setting the Cos weight example: 1 2 3 4. | |||||||||||||||||||||
| ShzQtmCutThroughProcessing | 1.3.6.1.4.1.7262.2.4.12.12 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current This value enables or disables the cut through feature in Quantum hardware.
| |||||||||||||||||||||
| ShzQtmCosEcfmFlowMapping | 1.3.6.1.4.1.7262.2.4.12.13 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current Select a queue to route ECFM frames. The mapping is only active when ECFM is disabled. If QoS is disabled then Q1, Q2 and Q3 cannot be selected.
| |||||||||||||||||||||
| ShzQtmCosControlFlowMapping | 1.3.6.1.4.1.7262.2.4.12.14 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current Select a queue to route slow protocol frames (with destination mac address 0x180C200xxxx). If QoS is disabled then Q1, Q2 and Q3 cannot be selected.
| |||||||||||||||||||||
| NhzQtmRapidLinkShutdown | 1.3.6.1.4.1.7262.2.4.13 | ||||||||||||||||||||
| ShzQtmRlsEnable | 1.3.6.1.4.1.7262.2.4.13.1 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current The Rapid Link Shutdown feature: enabled or disabled. Note: Changing this option requires a system reset.
| |||||||||||||||||||||
| ShzQtmRlsHardFaultMonitor | 1.3.6.1.4.1.7262.2.4.13.2 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current Enable the rlsHardFaultMonitor for rapid detection of severely degrade link. When disabled
only the RLS Link Degrade Monitor is used.
Note: Changing this option requires a system reset.
| |||||||||||||||||||||
| ShzQtmRlsWirelessPortOption | 1.3.6.1.4.1.7262.2.4.13.3 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current anyport - If the IDU is operating with two wireless ports and any one of the wireless ports goes down disables the ethernet port.
bothports - In the above condition, this feature disables the ehternet traffic through the faulty wireless link but continuously send
ethernet traffic through the other good wireless port. If the remaining wireless port also exceeds the error thereshold, ethernet port
will be disabled
Note: Changing this option requires a system reset.
| |||||||||||||||||||||
| ShzQtmRlsAutomaticLinkReestablish | 1.3.6.1.4.1.7262.2.4.13.4 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current If this feature is enabled, the link will be automatically reestablished If this feature is disabled, the user must explicitly use the manualReestablish object to bring the link back up
| |||||||||||||||||||||
| ShzQtmRlsManualLinkReestablish | 1.3.6.1.4.1.7262.2.4.13.5 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current This object is writeable ONLY if automaticLinkReestablish is set to disabled. The user explicitly brings the link back up by setting this object to enabled. The user explicitly brings the link down by setting this object to disabled. to bring the link back up
| |||||||||||||||||||||
| ShzQtmWriteRlsMonitorParametersToSystem | 1.3.6.1.4.1.7262.2.4.13.6 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current This writes RLS soft and hard fault monitor parameters to RAM Reading this object returns '1'.
| |||||||||||||||||||||
| ShzQtmRlsDroppedFramesThresholdOverride | 1.3.6.1.4.1.7262.2.4.13.7 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current If the Ethernet is down due to Queue-Based Rls shutdown, this will bring the ethernet back and obey the queue settings. Reading this object returns '1'.
| |||||||||||||||||||||
| ThzQtmRlsDroppedFramesThresholdTable | 1.3.6.1.4.1.7262.2.4.13.8 | NA | |||||||||||||||||||
table · not-accessible · current A table of RLS Queue Monitor Parameters | |||||||||||||||||||||
| RhzQtmRlsDroppedFramesThresholdEntry | 1.3.6.1.4.1.7262.2.4.13.8.1 | NA | |||||||||||||||||||
| ChzQtmRlsDroppedFramesThresholdIndex | 1.3.6.1.4.1.7262.2.4.13.8.1.1 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current A unique value for each interface.
| |||||||||||||||||||||
| ChzQtmRlsAllowedDroppedFrameRateValue | 1.3.6.1.4.1.7262.2.4.13.8.1.2 | DisplayString | RW | ||||||||||||||||||
column · DisplayString · read-write · current Maximum allowed ethernet frame drop rate. If the average drop rate exceeds this threshold in any of the 4 queues, the Ethernet port will be shut down. This feture is availabe only with bothports option | |||||||||||||||||||||
| ChzQtmRlsDroppedFrameMonitorPeriod | 1.3.6.1.4.1.7262.2.4.13.8.1.3 | Integer32 | RW | ||||||||||||||||||
column · Integer32 · read-write · current The monitoring period in seconds. | |||||||||||||||||||||
| ThzQtmRlsSoftFaultMonitorTable | 1.3.6.1.4.1.7262.2.4.13.9 | NA | |||||||||||||||||||
table · not-accessible · current A table of RLS Soft Fault Monitor Parameters | |||||||||||||||||||||
| RhzQtmRlsSoftFaultMonitorEntry | 1.3.6.1.4.1.7262.2.4.13.9.1 | NA | |||||||||||||||||||
row · not-accessible · current RLS Parameters for Soft Fault Monitoring | |||||||||||||||||||||
| ChzQtmRlsSoftFaultMonitorIndex | 1.3.6.1.4.1.7262.2.4.13.9.1.1 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current A unique value for each interface.
| |||||||||||||||||||||
| ChzQtmRlsEstablishErredFrameThreshold | 1.3.6.1.4.1.7262.2.4.13.9.1.2 | Integer32 | RW | ||||||||||||||||||
column · Integer32 · read-write · current Maximum erred blocks, per sample, allowed for link establishment. | |||||||||||||||||||||
| ChzQtmRlsShutdownErredFrameThreshold | 1.3.6.1.4.1.7262.2.4.13.9.1.3 | Integer32 | RW | ||||||||||||||||||
column · Integer32 · read-write · current Minimum erred blocks, per sample, allowed before link shutdown. | |||||||||||||||||||||
| ChzQtmRlsEstablishNumberOfSamples | 1.3.6.1.4.1.7262.2.4.13.9.1.4 | Integer32 | RW | ||||||||||||||||||
column · Integer32 · read-write · current Minimum number of consecutive good samples required before link is established. | |||||||||||||||||||||
| ChzQtmRlsShutdownNumberOfSamples | 1.3.6.1.4.1.7262.2.4.13.9.1.5 | Integer32 | RW | ||||||||||||||||||
column · Integer32 · read-write · current Minimum number of consecutive erred samples before link is shutdown. | |||||||||||||||||||||
| ChzQtmRlsEstablishSamplePeriod | 1.3.6.1.4.1.7262.2.4.13.9.1.6 | Integer32 | RW | ||||||||||||||||||
column · Integer32 · read-write · current Period of Time, in milliseconds, for monitoring Establish Erred Frame Threshold. | |||||||||||||||||||||
| ChzQtmRlsShutdownSamplePeriod | 1.3.6.1.4.1.7262.2.4.13.9.1.7 | Integer32 | RW | ||||||||||||||||||
column · Integer32 · read-write · current Period of Time, in milliseconds, for monitoring Shutdown Erred Frame Threshold. | |||||||||||||||||||||
| ChzQtmRlsQuickShutdownSamplePeriod | 1.3.6.1.4.1.7262.2.4.13.9.1.8 | Integer32 | RW | ||||||||||||||||||
column · Integer32 · read-write · current Minimum number of milliseconds required to classify samples as erred. | |||||||||||||||||||||
| ThzQtmHardFaultMonitorTable | 1.3.6.1.4.1.7262.2.4.13.10 | NA | |||||||||||||||||||
table · not-accessible · current A table of RLS Hard Fault Monitor Parameters | |||||||||||||||||||||
| RhzQtmHardFaultMonitorEntry | 1.3.6.1.4.1.7262.2.4.13.10.1 | NA | |||||||||||||||||||
row · not-accessible · current RLS Parameters for Hard Fault Monitoring | |||||||||||||||||||||
| ChzQtmHardFaultMonitorIndex | 1.3.6.1.4.1.7262.2.4.13.10.1.1 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current A unique value for each interface.
| |||||||||||||||||||||
| ChzQtmRlsHardFaultSamplePeriod | 1.3.6.1.4.1.7262.2.4.13.10.1.2 | Integer32 | RW | ||||||||||||||||||
column · Integer32 · read-write · current The period of time, in milliseconds, for which the rlsFaultThreshold is applied. | |||||||||||||||||||||
| ChzQtmRlsHardFaultThreshold | 1.3.6.1.4.1.7262.2.4.13.10.1.3 | Integer32 | RW | ||||||||||||||||||
column · Integer32 · read-write · current Acceptalbe errored block rate in percent | |||||||||||||||||||||
| ThzQtmRlsReceiveSignalLevelMonitorTable | 1.3.6.1.4.1.7262.2.4.13.11 | NA | |||||||||||||||||||
table · not-accessible · current A table of RLS RSL Monitor Parameters | |||||||||||||||||||||
| RhzQtmRlsReceiveSignalLevelMonitorEntry | 1.3.6.1.4.1.7262.2.4.13.11.1 | NA | |||||||||||||||||||
| ChzQtmRlsReceiveSignalLevelMonitorIndex | 1.3.6.1.4.1.7262.2.4.13.11.1.1 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current A unique value for each interface.
| |||||||||||||||||||||
| ChzQtmRlsMakeRslMonitorRslValue | 1.3.6.1.4.1.7262.2.4.13.11.1.2 | DisplayString (SIZE (0..24)) | RW | ||||||||||||||||||
column · DisplayString (SIZE (0..24)) · read-write · current The RSL threshold, in dBm. When Link is inactive and if RSL is higher than this threshold for a desired period, the link will become active. | |||||||||||||||||||||
| ChzQtmRlsMakeRslMonitorPeriod | 1.3.6.1.4.1.7262.2.4.13.11.1.3 | Integer32 | RW | ||||||||||||||||||
column · Integer32 · read-write · current The desired period, in seconds. When Link is inactive and if RSL is higher than the desiredthreshold for this period, the link will become active. | |||||||||||||||||||||
| NhzQtmRlsStatus | 1.3.6.1.4.1.7262.2.4.13.12 | ||||||||||||||||||||
| ThzQtmRlsCurrentDroppedFramesTable | 1.3.6.1.4.1.7262.2.4.13.12.1 | NA | |||||||||||||||||||
table · not-accessible · current A table of RLS Currently Observed Queue Monitor Parameters | |||||||||||||||||||||
| RhzQtmRlsCurrentDroppedFramesEntry | 1.3.6.1.4.1.7262.2.4.13.12.1.1 | NA | |||||||||||||||||||
row · not-accessible · current RLS Currently Observed Queue Monitor Parameters | |||||||||||||||||||||
| ChzQtmRlsCurrentDroppedFramesIndex | 1.3.6.1.4.1.7262.2.4.13.12.1.1.1 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current A unique value for each interface.
| |||||||||||||||||||||
| ChzQtmRlsCurrentDroppedFramesRateValue | 1.3.6.1.4.1.7262.2.4.13.12.1.1.2 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current RLS Current Ethernet Frame drop rate | |||||||||||||||||||||
| ChzQtmRlsCurrentDroppedFrameMonitorPeriod | 1.3.6.1.4.1.7262.2.4.13.12.1.1.3 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current Queue Monitoring time | |||||||||||||||||||||
| ChzQtmRlsCurrentQueueStatus | 1.3.6.1.4.1.7262.2.4.13.12.1.1.4 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current Queue Status - OK: drop rate is within the threshold, Activated: Exceeded the drop threshold | |||||||||||||||||||||
| ThzQtmRlsStatusTable | 1.3.6.1.4.1.7262.2.4.13.12.2 | NA | |||||||||||||||||||
table · not-accessible · current A table of RLS Parameters and states | |||||||||||||||||||||
| RhzQtmRlsStatusEntry | 1.3.6.1.4.1.7262.2.4.13.12.2.1 | NA | |||||||||||||||||||
| ChzQtmRlsStatusIndex | 1.3.6.1.4.1.7262.2.4.13.12.2.1.1 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current A unique value for each interface.
| |||||||||||||||||||||
| ChzQtmRlsOption | 1.3.6.1.4.1.7262.2.4.13.12.2.1.2 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current RLS Option. On Basic: RLS enabled with base degrade monitoring; On Advanced: RLS enabled with hard fault monitoring; On Anyport: If any one of the wireless links exceeds the threshold Ehternet Port will be shut down On Bothports: Both wireless links should exceed the threshold to bring the Ethernet Port down Off: Entire RLS feature disabled. | |||||||||||||||||||||
| ChzQtmRlsState | 1.3.6.1.4.1.7262.2.4.13.12.2.1.3 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current Rapid Link Shutdown State. If the state is activated, that means The wireless link is down for Ethernet traffic; If the state is inactivated, that means that wireless link is up for Ethernet traffic. | |||||||||||||||||||||
| ChzQtmRlsMismatchState | 1.3.6.1.4.1.7262.2.4.13.12.2.1.4 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current RLS Mismatch State. If the state is activated, that means RLS configuration is mismatched with peer. If the state is OK, that means RLS configuration is matched with peer. | |||||||||||||||||||||
| ChzQtmDegradeMonitorState | 1.3.6.1.4.1.7262.2.4.13.12.2.1.5 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current Degrade Monitor State. If the state is activated, that means the RLS Degrade Monitor is asserting the link down. If the state is OK, that means the RLS Degrade Monitor is asserting the link up. | |||||||||||||||||||||
| ChzQtmHardFaultMonitorState | 1.3.6.1.4.1.7262.2.4.13.12.2.1.6 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current Hard Fault Monitor State. If the state is activated, that means the Hard Fault Monitor is asserting the link down. If the state is OK, that means the RLS Hard Fault Monitor is asserting the link up. | |||||||||||||||||||||
| ChzQtmMakeRslThresholdState | 1.3.6.1.4.1.7262.2.4.13.12.2.1.7 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current Make RSL Threshold State. If the state is not met, that means the RLS signal level is below the threshold value. If the state is OK, that means the RLS signal level is above the threshold value. | |||||||||||||||||||||
| ChzQtmPeerRlsState | 1.3.6.1.4.1.7262.2.4.13.12.2.1.8 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current Peer RLS State. If the state is activated, that means the peer has activated RLS. If the state is OK, that means the Peer hasn't activated RLS. | |||||||||||||||||||||
| ChzQtmRadioInterfaceState | 1.3.6.1.4.1.7262.2.4.13.12.2.1.9 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current Radio Interface State. If the state is down, that means The radio interface is not operational(muted,disconnected, not configured). If the state is up, that means the radio interface is operational. | |||||||||||||||||||||
| ChzQtmNetworkInterfaceState | 1.3.6.1.4.1.7262.2.4.13.12.2.1.10 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current Network Interface State. If the state is down, that means the network interface (Ethernet/PHY) is not operational(disconnected, not configured). If the state is up, that means the network interface (Ethernet/PHY) is operational. | |||||||||||||||||||||
| ChzQtmUserConfiguredEstablishFer | 1.3.6.1.4.1.7262.2.4.13.12.2.1.11 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current User Configured Establish Frame Error Ratio required for the link to be restored to service, set by the user. An example value being '1.0E-7'. | |||||||||||||||||||||
| ChzQtmMinimumAchievableEstablishFer | 1.3.6.1.4.1.7262.2.4.13.12.2.1.12 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current Minimum achievable Frame Error Ratio required for the link to be restored to service. An example value being '1.0E-7'. | |||||||||||||||||||||
| ChzQtmUserConfiguredShutdownFer | 1.3.6.1.4.1.7262.2.4.13.12.2.1.13 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current User Configured Shutdown Frame Error Ratio required for the link to remain in-service, set by the user. An example value being '1.0E-7'. | |||||||||||||||||||||
| ChzQtmMinimumAchievableShutdownFer | 1.3.6.1.4.1.7262.2.4.13.12.2.1.14 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current Minimum achievable Frame Error Ratio required for the link to remain in-service. An example value being '1.0E-7'. | |||||||||||||||||||||
| ChzQtmUserConfiguredEstablishMonitorTime | 1.3.6.1.4.1.7262.2.4.13.12.2.1.15 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current User Configured Establish Monitor Time, in milliseconds, for which the 'User Configured Establish FER' must be achieved to bring link into service, set by user | |||||||||||||||||||||
| ChzQtmActualEstablishMonitorTime | 1.3.6.1.4.1.7262.2.4.13.12.2.1.16 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current Actual Establish Monitor Time, in milliseconds, for which the 'User Configured Establish FER'must be achieved to bring link into service, it's a multiple of the establish sample period required to observe the FER | |||||||||||||||||||||
| ChzQtmUserConfiguredShutdownMonitorTime | 1.3.6.1.4.1.7262.2.4.13.12.2.1.17 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current User Configured Shutdown Monitor Time, in milliseconds, for which the 'User Configured Shutdown FER' must be met for the link to remain in-service, set by user. | |||||||||||||||||||||
| ChzQtmActualShutdownMonitorTime | 1.3.6.1.4.1.7262.2.4.13.12.2.1.18 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current Actual Shutdown Monitor Time, in milliseconds, for which the 'User Configured Shutdown FER' must be met for the link to remain in-service, it's a multiple of the shutdown sample period required to observe the FER | |||||||||||||||||||||
| NhzQtmRlsPortGroup | 1.3.6.1.4.1.7262.2.4.13.13 | ||||||||||||||||||||
| ShzQtmRlsPort1 | 1.3.6.1.4.1.7262.2.4.13.13.1 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current This is an important configuration!!!!
There are three groups GR-A (OR-A), GR-B (OR-B) and GR-C (AND). Any Ethernet port can belong to any one of these three groups.These port groups are mutually exclusive. That means, one port cannot belongs to two or more groups
Example:
OR-A = {Port1, Port2}, OR-B = {Port3,Port5} and AND = {Port4}
RLS will not trigger due to local Ethernet port state if
1. Either Port1 or Port2 is up AND
2. Either Port2 or Port5 is up AND
3. Port4 is up
For any reason if RLS triggers, Port1, Port2, Port3, Port4 and Port5 all be shutdown.
| |||||||||||||||||||||
| ShzQtmRlsPort2 | 1.3.6.1.4.1.7262.2.4.13.13.2 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current This is an important configuration!!!!
There are three groups GR-A (OR-A), GR-B (OR-B) and GR-C (AND). Any Ethernet port can belong to any one of these three groups.These port groups are mutually exclusive. That means, one port cannot belongs to two or more groups
Example:
OR-A = {Port1, Port2}, OR-B = {Port3,Port5} and AND = {Port4}
RLS will not trigger due to local Ethernet port state if
1. Either Port1 or Port2 is up AND
2. Either Port2 or Port5 is up AND
3. Port4 is up
For any reason if RLS triggers, Port1, Port2, Port3, Port4 and Port5 all be shutdown.
| |||||||||||||||||||||
| ShzQtmRlsPort3 | 1.3.6.1.4.1.7262.2.4.13.13.3 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current This is an important configuration!!!!
There are three groups GR-A (OR-A), GR-B (OR-B) and GR-C (AND). Any Ethernet port can belong to any one of these three groups.These port groups are mutually exclusive. That means, one port cannot belongs to two or more groups
Example:
OR-A = {Port1, Port2}, OR-B = {Port3,Port5} and AND = {Port4}
RLS will not trigger due to local Ethernet port state if
1. Either Port1 or Port2 is up AND
2. Either Port2 or Port5 is up AND
3. Port4 is up
For any reason if RLS triggers, Port1, Port2, Port3, Port4 and Port5 all be shutdown.
| |||||||||||||||||||||
| ShzQtmRlsPort4 | 1.3.6.1.4.1.7262.2.4.13.13.4 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current This is an important configuration!!!!
There are three groups GR-A (OR-A), GR-B (OR-B) and GR-C (AND). Any Ethernet port can belong to any one of these three groups.These port groups are mutually exclusive. That means, one port cannot belongs to two or more groups
Example:
OR-A = {Port1, Port2}, OR-B = {Port3,Port5} and AND = {Port4}
RLS will not trigger due to local Ethernet port state if
1. Either Port1 or Port2 is up AND
2. Either Port2 or Port5 is up AND
3. Port4 is up
For any reason if RLS triggers, Port1, Port2, Port3, Port4 and Port5 all be shutdown.
| |||||||||||||||||||||
| ShzQtmRlsPort5 | 1.3.6.1.4.1.7262.2.4.13.13.5 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current This is an important configuration!!!!
There are three groups GR-A (OR-A), GR-B (OR-B) and GR-C (AND). Any Ethernet port can belong to any one of these three groups.These port groups are mutually exclusive. That means, one port cannot belongs to two or more groups
Example:
OR-A = {Port1, Port2}, OR-B = {Port3,Port5} and AND = {Port4}
RLS will not trigger due to local Ethernet port state if
1. Either Port1 or Port2 is up AND
2. Either Port2 or Port5 is up AND
3. Port4 is up
For any reason if RLS triggers, Port1, Port2, Port3, Port4 and Port5 all be shutdown.
| |||||||||||||||||||||
| ShzQtmRlsPort6 | 1.3.6.1.4.1.7262.2.4.13.13.6 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current This is an important configuration!!!!
There are three groups GR-A (OR-A), GR-B (OR-B) and GR-C (AND). Any Ethernet port can belong to any one of these three groups.These port groups are mutually exclusive. That means, one port cannot belongs to two or more groups
Example:
OR-A = {Port1, Port2}, OR-B = {Port3,Port5} and AND = {Port4}
RLS will not trigger due to local Ethernet port state if
1. Either Port1 or Port2 is up AND
2. Either Port2 or Port5 is up AND
3. Port4 is up
For any reason if RLS triggers, Port1, Port2, Port3, Port4 and Port5 all be shutdown.
| |||||||||||||||||||||
| ShzQtmRlsPort7 | 1.3.6.1.4.1.7262.2.4.13.13.7 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current This is an important configuration!!!!
There are three groups GR-A (OR-A), GR-B (OR-B) and GR-C (AND). Any Ethernet port can belong to any one of these three groups.These port groups are mutually exclusive. That means, one port cannot belongs to two or more groups
Example:
OR-A = {Port1, Port2}, OR-B = {Port3,Port5} and AND = {Port4}
RLS will not trigger due to local Ethernet port state if
1. Either Port1 or Port2 is up AND
2. Either Port2 or Port5 is up AND
3. Port4 is up
For any reason if RLS triggers, Port1, Port2, Port3, Port4 and Port5 all be shutdown.
| |||||||||||||||||||||
| ShzQtmRlsPort8 | 1.3.6.1.4.1.7262.2.4.13.13.8 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current This is an important configuration!!!!
There are three groups GR-A (OR-A), GR-B (OR-B) and GR-C (AND). Any Ethernet port can belong to any one of these three groups.These port groups are mutually exclusive. That means, one port cannot belongs to two or more groups
Example:
OR-A = {Port1, Port2}, OR-B = {Port3,Port5} and AND = {Port4}
RLS will not trigger due to local Ethernet port state if
1. Either Port1 or Port2 is up AND
2. Either Port2 or Port5 is up AND
3. Port4 is up
For any reason if RLS triggers, Port1, Port2, Port3, Port4 and Port5 all be shutdown.
| |||||||||||||||||||||
| ShzQtmRlsPauseEnable | 1.3.6.1.4.1.7262.2.4.13.14 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current
| |||||||||||||||||||||
| NhzQtmSntp | 1.3.6.1.4.1.7262.2.4.14 | ||||||||||||||||||||
| ShzQtmSntpEnable | 1.3.6.1.4.1.7262.2.4.14.1 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current Indicates whether SNTP feature is enabled.
| |||||||||||||||||||||
| ShzQtmSntpOffset | 1.3.6.1.4.1.7262.2.4.14.2 | Integer32 (-140..140) | RW | ||||||||||||||||||
scalar · Integer32 (-140..140) · read-write · current System time offset from GMT in tenths of hours. For example, an offset of 10 indicates 10 tenths, or 1 hour. An offset of 5 indicates half an hour. | |||||||||||||||||||||
| ThzQtmSntpServerTable | 1.3.6.1.4.1.7262.2.4.14.3 | NA | |||||||||||||||||||
table · not-accessible · current Table containing sntp server entries | |||||||||||||||||||||
| RhzQtmSntpServerEntry | 1.3.6.1.4.1.7262.2.4.14.3.1 | NA | |||||||||||||||||||
| ChzQtmSntpServerIndex | 1.3.6.1.4.1.7262.2.4.14.3.1.1 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current A unique value for each server. | |||||||||||||||||||||
| ChzQtmSntpServerIpAddress | 1.3.6.1.4.1.7262.2.4.14.3.1.2 | IpAddress | RW | ||||||||||||||||||
column · IpAddress · read-write · current The IP address of the server. | |||||||||||||||||||||
| ChzQtmSntpServerStatus | 1.3.6.1.4.1.7262.2.4.14.3.1.3 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current The status of the sntp server.
| |||||||||||||||||||||
| ChzQtmSntpServerStratum | 1.3.6.1.4.1.7262.2.4.14.3.1.4 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current Specifies the stratum of a server, 0 for failed server | |||||||||||||||||||||
| ShzQtmSntpRestoreDefault | 1.3.6.1.4.1.7262.2.4.14.4 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current Restores SNTP servers to default Addresses.
| |||||||||||||||||||||
| NhzQtmLogs | 1.3.6.1.4.1.7262.2.4.15 | ||||||||||||||||||||
| ShzQtmEventLogEnable | 1.3.6.1.4.1.7262.2.4.15.1 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current Indicates whether event log is enabled.
| |||||||||||||||||||||
| ShzQtmPerfmLogEnable | 1.3.6.1.4.1.7262.2.4.15.2 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current Indicates whether performance log is enabled.
| |||||||||||||||||||||
| ShzQtmPerfmLogInterval | 1.3.6.1.4.1.7262.2.4.15.3 | DisplayString (SIZE (0..10)) | RW | ||||||||||||||||||
scalar · DisplayString (SIZE (0..10)) · read-write · current Performance statistics are logged periodically by this interval. The interval can be up to 24:00:00 (24 hours) and as short as 00:00:1 (1 seconds). | |||||||||||||||||||||
| NhzQtmSysLog | 1.3.6.1.4.1.7262.2.4.15.4 | ||||||||||||||||||||
| ShzQtmSysLogEnable | 1.3.6.1.4.1.7262.2.4.15.4.1 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current
| |||||||||||||||||||||
| ShzQtmSysLogIpAddress | 1.3.6.1.4.1.7262.2.4.15.4.2 | IpAddress | RW | ||||||||||||||||||
| NhzQtmRadius | 1.3.6.1.4.1.7262.2.4.16 | ||||||||||||||||||||
| ShzQtmRadiusSuperUserAuthentication | 1.3.6.1.4.1.7262.2.4.16.1 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current The set strict mode on or off
| |||||||||||||||||||||
| ShzQtmRadiusServerTimeOut | 1.3.6.1.4.1.7262.2.4.16.2 | Integer32 | RO | ||||||||||||||||||
scalar · Integer32 · read-only · current Timeout period for authentication requests | |||||||||||||||||||||
| ShzQtmRadiusServerDeadTime | 1.3.6.1.4.1.7262.2.4.16.3 | Integer32 | RO | ||||||||||||||||||
scalar · Integer32 · read-only · current Time to declare an unresponsive server 'dead' | |||||||||||||||||||||
| ShzQtmRadiusServerReTransmit | 1.3.6.1.4.1.7262.2.4.16.4 | Integer32 | RO | ||||||||||||||||||
scalar · Integer32 · read-only · current Maximum number of retransmits to an unresponsive server | |||||||||||||||||||||
| ThzQtmRadiusServerTable | 1.3.6.1.4.1.7262.2.4.16.5 | NA | |||||||||||||||||||
table · not-accessible · current Table containing radius server entries | |||||||||||||||||||||
| RhzQtmRadiusServerEntry | 1.3.6.1.4.1.7262.2.4.16.5.1 | NA | |||||||||||||||||||
| ChzQtmRadiusServerIndex | 1.3.6.1.4.1.7262.2.4.16.5.1.1 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current A unique value for each server. | |||||||||||||||||||||
| ChzQtmRadiusCfgdHostIpAddress | 1.3.6.1.4.1.7262.2.4.16.5.1.2 | IpAddress | RW | ||||||||||||||||||
column · IpAddress · read-write · current The IP address of the configured radius server. Note: Changing this option requires a system reset. | |||||||||||||||||||||
| ChzQtmRadiusActiveHostIpAddress | 1.3.6.1.4.1.7262.2.4.16.5.1.3 | IpAddress | RO | ||||||||||||||||||
column · IpAddress · read-only · current The IP address of the active radius server. | |||||||||||||||||||||
| NhzQtmSnmpNotifications | 1.3.6.1.4.1.7262.2.4.21 | ||||||||||||||||||||
| !hzQtmLinkDown | 1.3.6.1.4.1.7262.2.4.21.1 | ||||||||||||||||||||
notification · current A linkDown trap signifies that the sending protocol entity recognizes a failure in one of the communication links represented in the agent's configuration.
| |||||||||||||||||||||
| !hzQtmLinkUp | 1.3.6.1.4.1.7262.2.4.21.2 | ||||||||||||||||||||
notification · current A linkUp trap signifies that the sending protocol entity recognizes that one of the communication links represented in the agent's configuration has come up.
| |||||||||||||||||||||
| !hzQtmExplicitAuthenticationFailure | 1.3.6.1.4.1.7262.2.4.21.3 | ||||||||||||||||||||
notification · current Authentication of the peer horizon node has failed. The severity is critical, the probable cause is an incorrect authentication configuration on horizon faulty cable between the modem and radio, and recommended course of action is to check both ends of the link. | |||||||||||||||||||||
| !hzQtmExplicitAuthenticationFailureCleared | 1.3.6.1.4.1.7262.2.4.21.4 | ||||||||||||||||||||
notification · current The condition has cleared. The peer node is now authenticated. | |||||||||||||||||||||
| !hzQtmHitlessAamConfigMisMatch | 1.3.6.1.4.1.7262.2.4.21.5 | ||||||||||||||||||||
notification · current Hitless Automatic Adaptive modulation configuration mismatch
| |||||||||||||||||||||
| !hzQtmHitlessAamConfigMisMatchCleared | 1.3.6.1.4.1.7262.2.4.21.6 | ||||||||||||||||||||
notification · current Hitless Automatic Adaptive modulation configuration mismatch cleared
| |||||||||||||||||||||
| !hzQtmHitlessAamActive | 1.3.6.1.4.1.7262.2.4.21.7 | ||||||||||||||||||||
notification · current Hitless Automatic Adaptive modulation on and system running on lower modulation
| |||||||||||||||||||||
| !hzQtmHitlessAamActiveCleared | 1.3.6.1.4.1.7262.2.4.21.8 | ||||||||||||||||||||
notification · current Hitless Automatic Adaptive modulation on system running on higher modulation
| |||||||||||||||||||||
| !hzQtmAtpcConfigMismatch | 1.3.6.1.4.1.7262.2.4.21.9 | ||||||||||||||||||||
notification · current ATPC configuration mismatch in the Horizon systems. ATPC is enabled at one system, but ATPC is not enabled at the other system. | |||||||||||||||||||||
| !hzQtmAtpcConfigMismatchCleared | 1.3.6.1.4.1.7262.2.4.21.10 | ||||||||||||||||||||
notification · current ATPC configuration mismatch in the Horizon systems is cleared. Both systems enabled ATPC. | |||||||||||||||||||||
| !hzQtmSntpServersUnreachable | 1.3.6.1.4.1.7262.2.4.21.11 | ||||||||||||||||||||
notification · current Can't reach any of the sntp servers | |||||||||||||||||||||
| !hzQtmSntpServersUnreachableCleared | 1.3.6.1.4.1.7262.2.4.21.12 | ||||||||||||||||||||
notification · current At least one of SNTP servers is reachable | |||||||||||||||||||||
| !hzQtmFrequencyFileInvalid | 1.3.6.1.4.1.7262.2.4.21.13 | ||||||||||||||||||||
notification · current When the executing frequency file is invalid, this trap is generated. | |||||||||||||||||||||
| !hzQtmDroppedFramesThresholdExceeded | 1.3.6.1.4.1.7262.2.4.21.14 | ||||||||||||||||||||
notification · current The ethernet dropped frames threshold has been detected above its threshold value. | |||||||||||||||||||||
| !hzQtmDroppedFramesThresholdExceededCleared | 1.3.6.1.4.1.7262.2.4.21.15 | ||||||||||||||||||||
notification · current The condition has cleared.The ethernet dropped frames threshold is now below its threshold value. | |||||||||||||||||||||
| !hzQtmBwUtilizationThresholdExceeded | 1.3.6.1.4.1.7262.2.4.21.16 | ||||||||||||||||||||
notification · current The ethernet bandwidth threshold has been detected above its threshold value. | |||||||||||||||||||||
| !hzQtmBwUtilizationThresholdExceededCleared | 1.3.6.1.4.1.7262.2.4.21.17 | ||||||||||||||||||||
notification · current The condition has cleared. The ethernet bandwidth threshold is now below its threshold value. | |||||||||||||||||||||
| !hzQtmRlsMismatch | 1.3.6.1.4.1.7262.2.4.21.18 | ||||||||||||||||||||
notification · current RLS mismatch | |||||||||||||||||||||
| !hzQtmRlsMismatchCleared | 1.3.6.1.4.1.7262.2.4.21.19 | ||||||||||||||||||||
notification · current RLS mismatch cleared | |||||||||||||||||||||
| !hzQtmRlsQueueBasedShutdownActivated | 1.3.6.1.4.1.7262.2.4.21.20 | ||||||||||||||||||||
notification · current RLS Queue-Based shutdown is activated | |||||||||||||||||||||
| !hzQtmRlsQueueBasedShutdownActivatedCleared | 1.3.6.1.4.1.7262.2.4.21.21 | ||||||||||||||||||||
notification · current RLS Queue-Based shutdown is not activated | |||||||||||||||||||||
| !hzQtmModemRxLossOfSignalLock | 1.3.6.1.4.1.7262.2.4.21.22 | ||||||||||||||||||||
notification · current Loss of signal lock from the demodulator. The severity is critical, the probable cause is lost synchronization with the far end, and recommended course of action is to check the operational state of both ends of the link.
| |||||||||||||||||||||
| !hzQtmModemRxLossOfSignalLockCleared | 1.3.6.1.4.1.7262.2.4.21.23 | ||||||||||||||||||||
| !hzQtmModemTxLossOfSync | 1.3.6.1.4.1.7262.2.4.21.24 | ||||||||||||||||||||
notification · current Loss of sync bytes at the input of the modulator. The severity is critical, the probable cause is physical interference in the air link, and recommended course of action is to check the line of site between the horizon nodes.
| |||||||||||||||||||||
| !hzQtmModemTxLossOfSyncCleared | 1.3.6.1.4.1.7262.2.4.21.25 | ||||||||||||||||||||
| !hzQtmModemSnrBelowThreshold | 1.3.6.1.4.1.7262.2.4.21.26 | ||||||||||||||||||||
notification · current The demodulator SNR performance worse than programmed levels. The severity is major, the probable cause is physical interference in the air link path or misalignment of the radios or severe weather conditions, and recommended course of action is to check the line of site between the horizon nodes.
| |||||||||||||||||||||
| !hzQtmModemSnrBelowThresholdCleared | 1.3.6.1.4.1.7262.2.4.21.27 | ||||||||||||||||||||
| !hzQtmModemEqualizerStressExceedThreshold | 1.3.6.1.4.1.7262.2.4.21.28 | ||||||||||||||||||||
notification · current Equalizer Stress measured within the demodulator exceeds the threshold value.
| |||||||||||||||||||||
| !hzQtmModemEqualizerStressExceedThresholdCleared | 1.3.6.1.4.1.7262.2.4.21.29 | ||||||||||||||||||||
notification · current Equalizer Stress measured within the demodulator is within the threshold value.
| |||||||||||||||||||||
| !hzQtmModemChannelizedRslBelowThreshold | 1.3.6.1.4.1.7262.2.4.21.30 | ||||||||||||||||||||
notification · current The RSL has been detected below its minimum threshold.
| |||||||||||||||||||||
| !hzQtmModemChannelizedRslBelowThresholdCleared | 1.3.6.1.4.1.7262.2.4.21.31 | ||||||||||||||||||||
notification · current The condition has cleared. RSL is now above its minimum threshold.
| |||||||||||||||||||||
| !hzQtmFpgaProgrammingError | 1.3.6.1.4.1.7262.2.4.21.32 | ||||||||||||||||||||
notification · current Encountered problem while programming modem. | |||||||||||||||||||||
| !hzQtmFpgaProgrammingErrorCleared | 1.3.6.1.4.1.7262.2.4.21.33 | ||||||||||||||||||||
notification · current Problem encountered while programming modem is gone. | |||||||||||||||||||||
| !hzQtmUserSessionCommenced | 1.3.6.1.4.1.7262.2.4.21.34 | ||||||||||||||||||||
notification · current A person has successfully gained access to the ascii management port (telnet, local management port, or HTTP). The username is included in the Trap. | |||||||||||||||||||||
| !hzQtmUserSessionTerminated | 1.3.6.1.4.1.7262.2.4.21.35 | ||||||||||||||||||||
notification · current A person has logged out of an ascii management port (telnet, local management port, or HTTP). The username is included in the Trap. | |||||||||||||||||||||
| !hzQtmAtpcTxAtMaxPwr | 1.3.6.1.4.1.7262.2.4.21.36 | ||||||||||||||||||||
notification · current ATPC auto-disabled (transmitting at coordinated power).
| |||||||||||||||||||||
| !hzQtmAtpcTxAtMaxPwrCleared | 1.3.6.1.4.1.7262.2.4.21.37 | ||||||||||||||||||||
| !hzQtmRadioSynthLostLock | 1.3.6.1.4.1.7262.2.4.21.38 | ||||||||||||||||||||
notification · current The radio synthesizer has lost lock. The severity is critical, the probable cause is a faulty radio, and recommended course of action is to replace the radio unit
| |||||||||||||||||||||
| !hzQtmRadioSynthLostLockCleared | 1.3.6.1.4.1.7262.2.4.21.39 | ||||||||||||||||||||
notification · current The radio synthesizer lost lock condition has cleared.
| |||||||||||||||||||||
| !hzQtmRadioLostCommunication | 1.3.6.1.4.1.7262.2.4.21.40 | ||||||||||||||||||||
notification · current RS232 communication lost between IDU and the radio. The severity is critical, the probable cause is a faulty cable between the modem and radio, and recommended course of action is to check the connection.
| |||||||||||||||||||||
| !hzQtmRadioLostCommunicationCleared | 1.3.6.1.4.1.7262.2.4.21.41 | ||||||||||||||||||||
notification · current RS232 communication has been re-establisted between IDU and the radio.
| |||||||||||||||||||||
| !hzQtmRadioMismatch | 1.3.6.1.4.1.7262.2.4.21.42 | ||||||||||||||||||||
notification · current The radio connected to the IDU modem does not match the frequency programmed into the modem unit. The severity is major, the probable cause is an incorrectly programmed modem or an incorrect radio type connected to the modem, and recommended course of action is to check the modem frequency settings and radio hardware version number or serial number.
| |||||||||||||||||||||
| !hzQtmRadioMismatchCleared | 1.3.6.1.4.1.7262.2.4.21.43 | ||||||||||||||||||||
notification · current The condition has cleared. The radio matches the programmed parameters in the modem.
| |||||||||||||||||||||
| !hzQtmRadioPowerAmp | 1.3.6.1.4.1.7262.2.4.21.44 | ||||||||||||||||||||
notification · current The power amplifier on the radio is not operating within normal operating specifications. The severity is critical, the probable cause a faulty radio unit, and recommended course of action is to replace the radio unit.
| |||||||||||||||||||||
| !hzQtmRadioPowerAmpCleared | 1.3.6.1.4.1.7262.2.4.21.45 | ||||||||||||||||||||
notification · current The power amplifier on the radio is now operating within normal specifications
| |||||||||||||||||||||
| !hzQtmRadioExcessiveTxCableLoss | 1.3.6.1.4.1.7262.2.4.21.46 | ||||||||||||||||||||
notification · current The radio cannot compensate for the calculated amount of Tx Cable Loss.
| |||||||||||||||||||||
| !hzQtmRadioExcessiveTxCableLossCleared | 1.3.6.1.4.1.7262.2.4.21.47 | ||||||||||||||||||||
| !hzQtmHiPowerRadioTxDetector | 1.3.6.1.4.1.7262.2.4.21.48 | ||||||||||||||||||||
notification · current This applies to High Power Radios only. Indicates minimum power threshold has not been surpassed.
| |||||||||||||||||||||
| !hzQtmHiPowerRadioTxDetectorCleared | 1.3.6.1.4.1.7262.2.4.21.49 | ||||||||||||||||||||
notification · current This applies to High Power Radios only. Indicates minimum power threshold alarm has cleared.
| |||||||||||||||||||||
| !hzQtmSecondaryRadioIsActive | 1.3.6.1.4.1.7262.2.4.21.50 | ||||||||||||||||||||
| !hzQtmSecondaryRadioIsActiveCleared | 1.3.6.1.4.1.7262.2.4.21.51 | ||||||||||||||||||||
notification · current Radio redundancy, secondary radio is no longer active.
| |||||||||||||||||||||
| !hzQtmRedundancySerialNumberMisMatch | 1.3.6.1.4.1.7262.2.4.21.52 | ||||||||||||||||||||
notification · current The radio serial number programmed in flash and radio do not match.
| |||||||||||||||||||||
| !hzQtmRedundancySerialNumberMisMatchCleared | 1.3.6.1.4.1.7262.2.4.21.53 | ||||||||||||||||||||
| !hzQtmRadioFirmwareMismatch | 1.3.6.1.4.1.7262.2.4.21.54 | ||||||||||||||||||||
notification · current The radio connected to the IDU modem does not match the radio band or frequency bank specified by the user. As a result, the system will not work.
| |||||||||||||||||||||
| !hzQtmRadioFirmwareMismatchCleared | 1.3.6.1.4.1.7262.2.4.21.55 | ||||||||||||||||||||
| !hzQtmSecondaryRadioNotdetected | 1.3.6.1.4.1.7262.2.4.21.56 | ||||||||||||||||||||
| !hzQtmSecondaryRadioNotdetectedCleared | 1.3.6.1.4.1.7262.2.4.21.57 | ||||||||||||||||||||
| !hzQtmPrimaryRadioNotdetected | 1.3.6.1.4.1.7262.2.4.21.58 | ||||||||||||||||||||
| !hzQtmPrimaryRadioNotdetectedCleared | 1.3.6.1.4.1.7262.2.4.21.59 | ||||||||||||||||||||
| !hzQtmFaultyPrimaryRadio | 1.3.6.1.4.1.7262.2.4.21.60 | ||||||||||||||||||||
| !hzQtmFaultyPrimaryRadioCleared | 1.3.6.1.4.1.7262.2.4.21.61 | ||||||||||||||||||||
| !hzQtmRadioExcessiveTxCableLossChange | 1.3.6.1.4.1.7262.2.4.21.62 | ||||||||||||||||||||
| !hzQtmRadioExcessiveTxCableLossChangeCleared | 1.3.6.1.4.1.7262.2.4.21.63 | ||||||||||||||||||||
| !hzQtmExcessiveRxCableLoss | 1.3.6.1.4.1.7262.2.4.21.64 | ||||||||||||||||||||
| !hzQtmExcessiveRxCableLossCleared | 1.3.6.1.4.1.7262.2.4.21.65 | ||||||||||||||||||||
| !hzQtmRedundancyPrimaryPortNotSet | 1.3.6.1.4.1.7262.2.4.21.66 | ||||||||||||||||||||
notification · current Radio Redundancy: Primary Port not set. | |||||||||||||||||||||
| !hzQtmRedundancyPrimaryPortNotSetCleared | 1.3.6.1.4.1.7262.2.4.21.67 | ||||||||||||||||||||
notification · current Radio Redundancy: Primary Port not set - cleared. | |||||||||||||||||||||
| !hzQtmRedundancySecondaryPortIsActive | 1.3.6.1.4.1.7262.2.4.21.68 | ||||||||||||||||||||
notification · current Radio Redundancy: Secondary Port is Active. | |||||||||||||||||||||
| !hzQtmRedundancySecondaryPortIsActiveCleared | 1.3.6.1.4.1.7262.2.4.21.69 | ||||||||||||||||||||
notification · current Radio Redundancy: Secondary Port is no longer Active | |||||||||||||||||||||
| !hzQtmRedundancyPrimaryPortFaulty | 1.3.6.1.4.1.7262.2.4.21.70 | ||||||||||||||||||||
notification · current Radio Redundancy: Primary Port is Faulty. | |||||||||||||||||||||
| !hzQtmRedundancyPrimaryPortFaultyCleared | 1.3.6.1.4.1.7262.2.4.21.71 | ||||||||||||||||||||
notification · current Radio Redundancy: Primary Port is no longer Faulty. | |||||||||||||||||||||
| !hzQtmRedundancySecondaryPortFaulty | 1.3.6.1.4.1.7262.2.4.21.72 | ||||||||||||||||||||
notification · current Radio Redundancy: Secondary Port is Faulty. | |||||||||||||||||||||
| !hzQtmRedundancySecondaryPortFaultyCleared | 1.3.6.1.4.1.7262.2.4.21.73 | ||||||||||||||||||||
notification · current Radio Redundancy: secondary Port is no longer Faulty. | |||||||||||||||||||||
| !hzQtmFanFailed | 1.3.6.1.4.1.7262.2.4.21.74 | ||||||||||||||||||||
notification · current Fan 1 has failed | |||||||||||||||||||||
| !hzQtmFanFailureCleared | 1.3.6.1.4.1.7262.2.4.21.75 | ||||||||||||||||||||
notification · current The Fan 1 Failure has Cleared | |||||||||||||||||||||
| !hzQtmModemRlsShutdownActivated | 1.3.6.1.4.1.7262.2.4.21.76 | ||||||||||||||||||||
| !hzQtmModemRlsShutdownActivatedCleared | 1.3.6.1.4.1.7262.2.4.21.77 | ||||||||||||||||||||
| !hzQtmRadioUnitHwChanged | 1.3.6.1.4.1.7262.2.4.21.78 | ||||||||||||||||||||
notification · current Indication that the Radio Unit hardware has changed.
| |||||||||||||||||||||
| !hzQtmRadioSwDownloadFailed | 1.3.6.1.4.1.7262.2.4.21.79 | ||||||||||||||||||||
notification · current The IDU failed to upload the radio firmware during the radio boot cycle.
| |||||||||||||||||||||
| !hzQtmRadioSwDownloadFailedCleared | 1.3.6.1.4.1.7262.2.4.21.80 | ||||||||||||||||||||
notification · current The IDU successfully uploaded the radio firmware after an initial upload failure.
| |||||||||||||||||||||
| !hzQtmRadioRestartedOK | 1.3.6.1.4.1.7262.2.4.21.81 | ||||||||||||||||||||
notification · current Radio unit has successfully restarted after a failure was found during a previous boot cycle.
| |||||||||||||||||||||
| !hzQtmMibChangeNotSaved | 1.3.6.1.4.1.7262.2.4.21.82 | ||||||||||||||||||||
notification · current The system has automatically re-programmed the mib but it has not been saved to flash. The system event logs will indicate what has changed in the mib. The user must invoke the 'save mib' command to save the mib to flash. | |||||||||||||||||||||
| !hzQtmMibChangeNotSavedCleared | 1.3.6.1.4.1.7262.2.4.21.83 | ||||||||||||||||||||
notification · current The mib has been saved to flash since the system has automatically re-programmed the mib | |||||||||||||||||||||
| !hzQtmRadioDrainCurrent | 1.3.6.1.4.1.7262.2.4.21.84 | ||||||||||||||||||||
notification · current The radio has a drain current alarm. View the system logs for more information.
| |||||||||||||||||||||
| !hzQtmRadioDrainCurrentCleared | 1.3.6.1.4.1.7262.2.4.21.85 | ||||||||||||||||||||
| !hzQtmIFSynthLostLock | 1.3.6.1.4.1.7262.2.4.21.86 | ||||||||||||||||||||
notification · current The Synthesizer has Lost Lock on the IF Path. View the system logs for more information.
| |||||||||||||||||||||
| !hzQtmIFSynthLostLockCleared | 1.3.6.1.4.1.7262.2.4.21.87 | ||||||||||||||||||||
| !hzQtmInvalidSystemConfig | 1.3.6.1.4.1.7262.2.4.21.88 | ||||||||||||||||||||
notification · current The system has been configured incorrectly. Check the logs or use the CLI get alarms to isolate the cause. | |||||||||||||||||||||
| !hzQtmInvalidSystemConfigCleared | 1.3.6.1.4.1.7262.2.4.21.89 | ||||||||||||||||||||
notification · current The invalid system configuration alarm has been cleared. | |||||||||||||||||||||
| !hzQtmHitlessAamEvent | 1.3.6.1.4.1.7262.2.4.21.90 | ||||||||||||||||||||
notification · current Hitless Automatic Adaptive modulation switch triggered.
| |||||||||||||||||||||
| !hzQtmModemXPICEquStressExceedThreshold | 1.3.6.1.4.1.7262.2.4.21.91 | ||||||||||||||||||||
notification · current XPIC Equalizer Stress measured within the demodulator exceeds the threshold value.
| |||||||||||||||||||||
| !hzQtmModemXPICEquStressExceedThresholdCleared | 1.3.6.1.4.1.7262.2.4.21.92 | ||||||||||||||||||||
notification · current XPIC Equalizer Stress measured within the demodulator is within the threshold value.
| |||||||||||||||||||||
| !hzQtmPartnerNodeAlarmIndication | 1.3.6.1.4.1.7262.2.4.21.93 | ||||||||||||||||||||
notification · current The configuration in the partner node does not match this system. | |||||||||||||||||||||
| !hzQtmPartnerNodeAlarmIndicationCleared | 1.3.6.1.4.1.7262.2.4.21.94 | ||||||||||||||||||||
notification · current Partner node alarm is cleared. | |||||||||||||||||||||
| !hzQtmBandwidthDoublingInvalidLinkConfig | 1.3.6.1.4.1.7262.2.4.21.95 | ||||||||||||||||||||
notification · current The bandwidth doubling has invalid link configuration. i.e., Primary is synchronized with remote primary, and secondary is synchronized with remote secondary | |||||||||||||||||||||
| !hzQtmBandwidthDoublingInvalidLinkConfigCleared | 1.3.6.1.4.1.7262.2.4.21.96 | ||||||||||||||||||||
notification · current Bandwidth doubling invalid link configuration alarm is cleared. | |||||||||||||||||||||
| !hzQtmBandwidthDoublingWrongPortConnected | 1.3.6.1.4.1.7262.2.4.21.97 | ||||||||||||||||||||
notification · current Wrong port is connected to the loacal partner. | |||||||||||||||||||||
| !hzQtmBandwidthDoublingWrongPortConnectedCleared | 1.3.6.1.4.1.7262.2.4.21.98 | ||||||||||||||||||||
notification · current Bandwidth doubling wrong port connected alarm is cleared. | |||||||||||||||||||||
| !hzQtmRadioPowerOff | 1.3.6.1.4.1.7262.2.4.21.99 | ||||||||||||||||||||
notification · current Radio power is off (potential IF cable short detection). | |||||||||||||||||||||
| !hzQtmRadioPowerOffCleared | 1.3.6.1.4.1.7262.2.4.21.100 | ||||||||||||||||||||
| !hzQtmSynceLostLock | 1.3.6.1.4.1.7262.2.4.21.101 | ||||||||||||||||||||
notification · current SyncE Lost Lock alarm. | |||||||||||||||||||||
| !hzQtmSynceLostLockCleared | 1.3.6.1.4.1.7262.2.4.21.102 | ||||||||||||||||||||
notification · current SyncE Lost Lock alarm cleared. | |||||||||||||||||||||
| !hzQtmSynceSecondarySourceInUse | 1.3.6.1.4.1.7262.2.4.21.103 | ||||||||||||||||||||
notification · current SyncE Secondary Source in use alarm. | |||||||||||||||||||||
| !hzQtmSynceSecondarySourceInUseCleared | 1.3.6.1.4.1.7262.2.4.21.104 | ||||||||||||||||||||
notification · current SyncE Secondary Source in use alarm cleared. | |||||||||||||||||||||
| NhzQtmReserved | 1.3.6.1.4.1.7262.2.4.999 | ||||||||||||||||||||
| IhzQtmModIdentity | 1.3.6.1.4.1.7262.2.4.1000 | ||||||||||||||||||||
Traps / Notifications
- hzQtmAtpcConfigMismatch
1.3.6.1.4.1.7262.2.4.21.9 - hzQtmAtpcConfigMismatchCleared
1.3.6.1.4.1.7262.2.4.21.10 - hzQtmAtpcTxAtMaxPwr
1.3.6.1.4.1.7262.2.4.21.36 - hzQtmAtpcTxAtMaxPwrCleared
1.3.6.1.4.1.7262.2.4.21.37 - hzQtmBandwidthDoublingInvalidLinkConfig
1.3.6.1.4.1.7262.2.4.21.95 - hzQtmBandwidthDoublingInvalidLinkConfigCleared
1.3.6.1.4.1.7262.2.4.21.96 - hzQtmBandwidthDoublingWrongPortConnected
1.3.6.1.4.1.7262.2.4.21.97 - hzQtmBandwidthDoublingWrongPortConnectedCleared
1.3.6.1.4.1.7262.2.4.21.98 - hzQtmBwUtilizationThresholdExceeded
1.3.6.1.4.1.7262.2.4.21.16 - hzQtmBwUtilizationThresholdExceededCleared
1.3.6.1.4.1.7262.2.4.21.17 - hzQtmDroppedFramesThresholdExceeded
1.3.6.1.4.1.7262.2.4.21.14 - hzQtmDroppedFramesThresholdExceededCleared
1.3.6.1.4.1.7262.2.4.21.15 - hzQtmExcessiveRxCableLoss
1.3.6.1.4.1.7262.2.4.21.64 - hzQtmExcessiveRxCableLossCleared
1.3.6.1.4.1.7262.2.4.21.65 - hzQtmExplicitAuthenticationFailure
1.3.6.1.4.1.7262.2.4.21.3 - hzQtmExplicitAuthenticationFailureCleared
1.3.6.1.4.1.7262.2.4.21.4 - hzQtmFanFailed
1.3.6.1.4.1.7262.2.4.21.74 - hzQtmFanFailureCleared
1.3.6.1.4.1.7262.2.4.21.75 - hzQtmFaultyPrimaryRadio
1.3.6.1.4.1.7262.2.4.21.60 - hzQtmFaultyPrimaryRadioCleared
1.3.6.1.4.1.7262.2.4.21.61 - hzQtmFpgaProgrammingError
1.3.6.1.4.1.7262.2.4.21.32 - hzQtmFpgaProgrammingErrorCleared
1.3.6.1.4.1.7262.2.4.21.33 - hzQtmFrequencyFileInvalid
1.3.6.1.4.1.7262.2.4.21.13 - hzQtmHiPowerRadioTxDetector
1.3.6.1.4.1.7262.2.4.21.48 - hzQtmHiPowerRadioTxDetectorCleared
1.3.6.1.4.1.7262.2.4.21.49 - hzQtmHitlessAamActive
1.3.6.1.4.1.7262.2.4.21.7 - hzQtmHitlessAamActiveCleared
1.3.6.1.4.1.7262.2.4.21.8 - hzQtmHitlessAamConfigMisMatch
1.3.6.1.4.1.7262.2.4.21.5 - hzQtmHitlessAamConfigMisMatchCleared
1.3.6.1.4.1.7262.2.4.21.6 - hzQtmHitlessAamEvent
1.3.6.1.4.1.7262.2.4.21.90 - hzQtmIFSynthLostLock
1.3.6.1.4.1.7262.2.4.21.86 - hzQtmIFSynthLostLockCleared
1.3.6.1.4.1.7262.2.4.21.87 - hzQtmInvalidSystemConfig
1.3.6.1.4.1.7262.2.4.21.88 - hzQtmInvalidSystemConfigCleared
1.3.6.1.4.1.7262.2.4.21.89 - hzQtmLinkDown
1.3.6.1.4.1.7262.2.4.21.1 - hzQtmLinkUp
1.3.6.1.4.1.7262.2.4.21.2 - hzQtmMibChangeNotSaved
1.3.6.1.4.1.7262.2.4.21.82 - hzQtmMibChangeNotSavedCleared
1.3.6.1.4.1.7262.2.4.21.83 - hzQtmModemChannelizedRslBelowThreshold
1.3.6.1.4.1.7262.2.4.21.30 - hzQtmModemChannelizedRslBelowThresholdCleared
1.3.6.1.4.1.7262.2.4.21.31 - hzQtmModemEqualizerStressExceedThreshold
1.3.6.1.4.1.7262.2.4.21.28 - hzQtmModemEqualizerStressExceedThresholdCleared
1.3.6.1.4.1.7262.2.4.21.29 - hzQtmModemRlsShutdownActivated
1.3.6.1.4.1.7262.2.4.21.76 - hzQtmModemRlsShutdownActivatedCleared
1.3.6.1.4.1.7262.2.4.21.77 - hzQtmModemRxLossOfSignalLock
1.3.6.1.4.1.7262.2.4.21.22 - hzQtmModemRxLossOfSignalLockCleared
1.3.6.1.4.1.7262.2.4.21.23 - hzQtmModemSnrBelowThreshold
1.3.6.1.4.1.7262.2.4.21.26 - hzQtmModemSnrBelowThresholdCleared
1.3.6.1.4.1.7262.2.4.21.27 - hzQtmModemTxLossOfSync
1.3.6.1.4.1.7262.2.4.21.24 - hzQtmModemTxLossOfSyncCleared
1.3.6.1.4.1.7262.2.4.21.25 - hzQtmModemXPICEquStressExceedThreshold
1.3.6.1.4.1.7262.2.4.21.91 - hzQtmModemXPICEquStressExceedThresholdCleared
1.3.6.1.4.1.7262.2.4.21.92 - hzQtmPartnerNodeAlarmIndication
1.3.6.1.4.1.7262.2.4.21.93 - hzQtmPartnerNodeAlarmIndicationCleared
1.3.6.1.4.1.7262.2.4.21.94 - hzQtmPrimaryRadioNotdetected
1.3.6.1.4.1.7262.2.4.21.58 - hzQtmPrimaryRadioNotdetectedCleared
1.3.6.1.4.1.7262.2.4.21.59 - hzQtmRadioDrainCurrent
1.3.6.1.4.1.7262.2.4.21.84 - hzQtmRadioDrainCurrentCleared
1.3.6.1.4.1.7262.2.4.21.85 - hzQtmRadioExcessiveTxCableLoss
1.3.6.1.4.1.7262.2.4.21.46 - hzQtmRadioExcessiveTxCableLossChange
1.3.6.1.4.1.7262.2.4.21.62 - hzQtmRadioExcessiveTxCableLossChangeCleared
1.3.6.1.4.1.7262.2.4.21.63 - hzQtmRadioExcessiveTxCableLossCleared
1.3.6.1.4.1.7262.2.4.21.47 - hzQtmRadioFirmwareMismatch
1.3.6.1.4.1.7262.2.4.21.54 - hzQtmRadioFirmwareMismatchCleared
1.3.6.1.4.1.7262.2.4.21.55 - hzQtmRadioLostCommunication
1.3.6.1.4.1.7262.2.4.21.40 - hzQtmRadioLostCommunicationCleared
1.3.6.1.4.1.7262.2.4.21.41 - hzQtmRadioMismatch
1.3.6.1.4.1.7262.2.4.21.42 - hzQtmRadioMismatchCleared
1.3.6.1.4.1.7262.2.4.21.43 - hzQtmRadioPowerAmp
1.3.6.1.4.1.7262.2.4.21.44 - hzQtmRadioPowerAmpCleared
1.3.6.1.4.1.7262.2.4.21.45 - hzQtmRadioPowerOff
1.3.6.1.4.1.7262.2.4.21.99 - hzQtmRadioPowerOffCleared
1.3.6.1.4.1.7262.2.4.21.100 - hzQtmRadioRestartedOK
1.3.6.1.4.1.7262.2.4.21.81 - hzQtmRadioSwDownloadFailed
1.3.6.1.4.1.7262.2.4.21.79 - hzQtmRadioSwDownloadFailedCleared
1.3.6.1.4.1.7262.2.4.21.80 - hzQtmRadioSynthLostLock
1.3.6.1.4.1.7262.2.4.21.38 - hzQtmRadioSynthLostLockCleared
1.3.6.1.4.1.7262.2.4.21.39 - hzQtmRadioUnitHwChanged
1.3.6.1.4.1.7262.2.4.21.78 - hzQtmRedundancyPrimaryPortFaulty
1.3.6.1.4.1.7262.2.4.21.70 - hzQtmRedundancyPrimaryPortFaultyCleared
1.3.6.1.4.1.7262.2.4.21.71 - hzQtmRedundancyPrimaryPortNotSet
1.3.6.1.4.1.7262.2.4.21.66 - hzQtmRedundancyPrimaryPortNotSetCleared
1.3.6.1.4.1.7262.2.4.21.67 - hzQtmRedundancySecondaryPortFaulty
1.3.6.1.4.1.7262.2.4.21.72 - hzQtmRedundancySecondaryPortFaultyCleared
1.3.6.1.4.1.7262.2.4.21.73 - hzQtmRedundancySecondaryPortIsActive
1.3.6.1.4.1.7262.2.4.21.68 - hzQtmRedundancySecondaryPortIsActiveCleared
1.3.6.1.4.1.7262.2.4.21.69 - hzQtmRedundancySerialNumberMisMatch
1.3.6.1.4.1.7262.2.4.21.52 - hzQtmRedundancySerialNumberMisMatchCleared
1.3.6.1.4.1.7262.2.4.21.53 - hzQtmRlsMismatch
1.3.6.1.4.1.7262.2.4.21.18 - hzQtmRlsMismatchCleared
1.3.6.1.4.1.7262.2.4.21.19 - hzQtmRlsQueueBasedShutdownActivated
1.3.6.1.4.1.7262.2.4.21.20 - hzQtmRlsQueueBasedShutdownActivatedCleared
1.3.6.1.4.1.7262.2.4.21.21 - hzQtmSecondaryRadioIsActive
1.3.6.1.4.1.7262.2.4.21.50 - hzQtmSecondaryRadioIsActiveCleared
1.3.6.1.4.1.7262.2.4.21.51 - hzQtmSecondaryRadioNotdetected
1.3.6.1.4.1.7262.2.4.21.56 - hzQtmSecondaryRadioNotdetectedCleared
1.3.6.1.4.1.7262.2.4.21.57 - hzQtmSntpServersUnreachable
1.3.6.1.4.1.7262.2.4.21.11 - hzQtmSntpServersUnreachableCleared
1.3.6.1.4.1.7262.2.4.21.12 - hzQtmSynceLostLock
1.3.6.1.4.1.7262.2.4.21.101 - hzQtmSynceLostLockCleared
1.3.6.1.4.1.7262.2.4.21.102 - hzQtmSynceSecondarySourceInUse
1.3.6.1.4.1.7262.2.4.21.103 - hzQtmSynceSecondarySourceInUseCleared
1.3.6.1.4.1.7262.2.4.21.104 - hzQtmUserSessionCommenced
1.3.6.1.4.1.7262.2.4.21.34 - hzQtmUserSessionTerminated
1.3.6.1.4.1.7262.2.4.21.35