DRAGONWAVE-HORIZON-IDU-MIB
Standards (IETF)snmptranslate -m DRAGONWAVE-HORIZON-IDU-MIB -Tpsnmpwalk -v2c -c <community> -m DRAGONWAVE-HORIZON-IDU-MIB <host> 1.3.6.1.2.1.11.0.0Imports
| HORIZON-MIB | horizon |
|---|---|
| IF-MIB | OBJECT-TYPE, ifIndex |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
| SNMPv2-MIB | snmp |
| SNMPv2-SMI | Bits, Counter32, Gauge32, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, OBJECT-IDENTITY, OBJECT-TYPE, TRAP-TYPE, TimeTicks, Unsigned32, iso |
| SNMPv2-TC | DisplayString, PhysAddress, TEXTUAL-CONVENTION |
OID tree
| Name | OID | Type | Access | Status | Example | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| !coldStart | 1.3.6.1.2.1.11.0.0 | ||||||||||||||||
notification A coldStart trap signifies that the sending protocol entity is reinitializing itself such that the agent's configuration or the protocol entity implementation may be altered. | |||||||||||||||||
| !linkDown | 1.3.6.1.2.1.11.0.1 | ||||||||||||||||
notification A linkDown trap signifies that the sending protocol entity recognizes a failure in one of the communication links represented in the agent's configuration.
| |||||||||||||||||
| !linkUp | 1.3.6.1.2.1.11.0.2 | ||||||||||||||||
notification A linkUp trap signifies that the sending protocol entity recognizes that one of the communication links represented in the agent's configuration has come up.
| |||||||||||||||||
| NhorizonIdu | 1.3.6.1.4.1.7262.2.3 | ||||||||||||||||
| NhzIduSystem | 1.3.6.1.4.1.7262.2.3.1 | ||||||||||||||||
| NhzIduSysGeneral | 1.3.6.1.4.1.7262.2.3.1.1 | ||||||||||||||||
| ShzIduResetSystem | 1.3.6.1.4.1.7262.2.3.1.1.1 | INTEGER | WO | mandatory | |||||||||||||
scalar · INTEGER · write-only · mandatory Writing '1' to this object resets the NIC, Modem, and radio.
| |||||||||||||||||
| ShzIduSaveMIB | 1.3.6.1.4.1.7262.2.3.1.1.2 | INTEGER | WO | mandatory | |||||||||||||
scalar · INTEGER · write-only · mandatory Writing '1' or 'save' to this object save all MIB values.
| |||||||||||||||||
| ShzIduOperStatus | 1.3.6.1.4.1.7262.2.3.1.1.3 | INTEGER | RO | mandatory | |||||||||||||
scalar · INTEGER · read-only · mandatory The current operational state of the system. Testing indicates that no operational packets can be passed.
| |||||||||||||||||
| ShzIduAirInterfaceEncryption | 1.3.6.1.4.1.7262.2.3.1.1.4 | INTEGER | RO | mandatory | |||||||||||||
scalar · INTEGER · read-only · mandatory OBSOLETE. This enables encryption on the air interface.
| |||||||||||||||||
| ShzIduSystemCapacityOption | 1.3.6.1.4.1.7262.2.3.1.1.5 | INTEGER | RW | mandatory | |||||||||||||
scalar · INTEGER · read-write · mandatory Sets the system capacity options. There are four options: Select 'singleModem-singleRadio' for a 400Mbps system. Select 'multiModem-singleRadio' for 800Mbps when the system is equipped with an internal or external IF Coupler. Select 'multiModem-multiRadio' for 800Mbps when the system is equipped with two radios connected to a Dual Polarization Radio Mount (DPRM). Select 'singleModem-redundancy' to provide a redundant 400Mbps link using a Redundant Dual Radio Mount (RDRM). Notes: Setting the system capacity to 'singleModem-redundancy will fail if the primary path has not been set to either wireless_port1 or wireless_port2. Setting the system capacity to 'multiModem-multiRadio' will set the transmit power of wireless_port2 to the same transmite power as wireless_port1.
| |||||||||||||||||
| NhzIduSysUpgradeSpeed | 1.3.6.1.4.1.7262.2.3.1.2 | ||||||||||||||||
| ShzIduLicensedSpeedUpgradeSpeedAndKey | 1.3.6.1.4.1.7262.2.3.1.2.1 | DisplayString | WO | mandatory | |||||||||||||
scalar · DisplayString · write-only · mandatory Enter your apngFLEX key here along with the maximum speed for that key to upgrade the FLEX system. Format: [speed] [key] Example: 800 abc123 | |||||||||||||||||
| ShzIduLicensedSpeedChanges | 1.3.6.1.4.1.7262.2.3.1.2.2 | INTEGER | RO | mandatory | |||||||||||||
scalar · INTEGER · read-only · mandatory This object indicates the number of times the licensed speed has been changed successfully. It is used when generating new license keys for your system. | |||||||||||||||||
| NhzIduSysDowngradeSpeed | 1.3.6.1.4.1.7262.2.3.1.3 | ||||||||||||||||
| ShzIduLicensedSpeedDowngradeSpeed | 1.3.6.1.4.1.7262.2.3.1.3.1 | INTEGER | WO | mandatory | |||||||||||||
scalar · INTEGER · write-only · mandatory Reduce your licensed speed by entering a speed to this write-only object and take note of the generated key in hzIduDowngradeLicensedSpeedKey. Format: [speed] Example: 200 | |||||||||||||||||
| ShzIduLicensedSpeedCountUsedForKey | 1.3.6.1.4.1.7262.2.3.1.3.2 | INTEGER | RO | mandatory | |||||||||||||
scalar · INTEGER · read-only · mandatory This object indicates the number of times the licensed speed has been changed successfully. It is used when generating new license keys for your system. | |||||||||||||||||
| ShzIduLicensedSpeedDowngradeKey | 1.3.6.1.4.1.7262.2.3.1.3.3 | DisplayString | RO | mandatory | |||||||||||||
scalar · DisplayString · read-only · mandatory This read-only object will show a 'key' after successfully downgrading the license speed. | |||||||||||||||||
| NhzIduSysUpgradeWirelessPorts | 1.3.6.1.4.1.7262.2.3.1.4 | ||||||||||||||||
| ShzIduLicensedWirelessPortsUpgradeKey | 1.3.6.1.4.1.7262.2.3.1.4.1 | DisplayString | WO | mandatory | |||||||||||||
scalar · DisplayString · write-only · mandatory Hardware upgrade license key. Upgrade the number of active wireless ports by setting a valid license key. | |||||||||||||||||
| ShzIduLicensedWirelessPortsChanges | 1.3.6.1.4.1.7262.2.3.1.4.2 | Counter | RO | mandatory | |||||||||||||
scalar · Counter · read-only · mandatory This object indicates the number of times the wireless port count has been changed successfully. It is used when generating new license keys for your system. Currently, there is no SNMP object for downgrading the number of wireless ports. | |||||||||||||||||
| NhzIduSysSpeed | 1.3.6.1.4.1.7262.2.3.1.5 | ||||||||||||||||
| ShzIduSystemCurrentSpeed | 1.3.6.1.4.1.7262.2.3.1.5.1 | INTEGER (0..1000) | RW | mandatory | |||||||||||||
scalar · INTEGER (0..1000) · read-write · mandatory Changes the working speed of the horizon. Writes are only valid if system is a FLEX. Due to backwards compatibility issue, 0 value should be treated as 0 Mbps. | |||||||||||||||||
| ShzIduSystemLicensedSpeed | 1.3.6.1.4.1.7262.2.3.1.5.2 | INTEGER (0..1000) | RO | mandatory | |||||||||||||
scalar · INTEGER (0..1000) · read-only · mandatory Indicates the maximum speed that this system can operate at. Due to backwards compatibility issue, 0 value should be treated as 0 Mbps. | |||||||||||||||||
| ShzIduSystemMode | 1.3.6.1.4.1.7262.2.3.1.5.3 | INTEGER | RW | mandatory | |||||||||||||
scalar · INTEGER · read-write · mandatory Indicates the specific type of system this is.
| |||||||||||||||||
| NhzIduInventory | 1.3.6.1.4.1.7262.2.3.1.6 | ||||||||||||||||
| NhzIduHwInventory | 1.3.6.1.4.1.7262.2.3.1.6.1 | ||||||||||||||||
| ShzIduFrequencyFilePartNumber | 1.3.6.1.4.1.7262.2.3.1.6.1.1 | DisplayString | RO | mandatory | |||||||||||||
scalar · DisplayString · read-only · mandatory A textual string containing Part Number of the Frequency File | |||||||||||||||||
| ShzIduUnitSerialNo | 1.3.6.1.4.1.7262.2.3.1.6.1.2 | DisplayString | RO | mandatory | DW0123456789 | ||||||||||||
scalar · DisplayString · read-only · mandatory A textual string containing Serial Number of the Unit. Example values from LibreNMS test devices
| |||||||||||||||||
| ShzIduUnitAssemblylNo | 1.3.6.1.4.1.7262.2.3.1.6.1.3 | DisplayString | RO | mandatory | 60-000367-02 | ||||||||||||
scalar · DisplayString · read-only · mandatory A textual string containing the Assembly Number of the Unit. Example values from LibreNMS test devices
| |||||||||||||||||
| ShzIduIfSerialNo1 | 1.3.6.1.4.1.7262.2.3.1.6.1.4 | DisplayString | RO | mandatory | |||||||||||||
scalar · DisplayString · read-only · mandatory A textual string containing Serial no of IF 1. | |||||||||||||||||
| ShzIduIfSerialNo2 | 1.3.6.1.4.1.7262.2.3.1.6.1.5 | DisplayString | RO | mandatory | |||||||||||||
scalar · DisplayString · read-only · mandatory A textual string containing Serial no of IF 2. | |||||||||||||||||
| ShzIduIfAssemblylNo1 | 1.3.6.1.4.1.7262.2.3.1.6.1.6 | DisplayString | RO | mandatory | |||||||||||||
scalar · DisplayString · read-only · mandatory A textual string containing assembly no of IF 1. | |||||||||||||||||
| ShzIduIfAssemblylNo2 | 1.3.6.1.4.1.7262.2.3.1.6.1.7 | DisplayString | RO | mandatory | |||||||||||||
scalar · DisplayString · read-only · mandatory A textual string containing assembly no of IF 2. | |||||||||||||||||
| ShzIduNccSerialNo | 1.3.6.1.4.1.7262.2.3.1.6.1.10 | DisplayString | RO | mandatory | |||||||||||||
scalar · DisplayString · read-only · mandatory A textual string containing Serial no of the NCC. | |||||||||||||||||
| ShzIduNccAssemblylNo | 1.3.6.1.4.1.7262.2.3.1.6.1.11 | DisplayString | RO | mandatory | |||||||||||||
scalar · DisplayString · read-only · mandatory A textual string containing assembly no of the NCC. | |||||||||||||||||
| ShzIduRadio1SerialNo | 1.3.6.1.4.1.7262.2.3.1.6.1.12 | DisplayString | RO | mandatory | |||||||||||||
scalar · DisplayString · read-only · mandatory A textual string containing the serial number of radio 1 | |||||||||||||||||
| ShzIduRadio2SerialNo | 1.3.6.1.4.1.7262.2.3.1.6.1.13 | DisplayString | RO | mandatory | |||||||||||||
scalar · DisplayString · read-only · mandatory A textual string containing the serial number of radio 2 if configured | |||||||||||||||||
| ShzIduRadio1HardwareId | 1.3.6.1.4.1.7262.2.3.1.6.1.14 | DisplayString | RO | mandatory | |||||||||||||
scalar · DisplayString · read-only · mandatory A textual string containing the hardware id of radio 1 | |||||||||||||||||
| ShzIduRadio2HardwareId | 1.3.6.1.4.1.7262.2.3.1.6.1.15 | DisplayString | RO | mandatory | |||||||||||||
scalar · DisplayString · read-only · mandatory A textual string containing the hardware id of radio 2 if configured | |||||||||||||||||
| ShzIduInternalIFCouplerPresent | 1.3.6.1.4.1.7262.2.3.1.6.1.16 | INTEGER | RO | mandatory | |||||||||||||
scalar · INTEGER · read-only · mandatory This attribute indicates if there is an internal IF Coupler card present.
| |||||||||||||||||
| ShzIduHwWirelessPortsLicensed | 1.3.6.1.4.1.7262.2.3.1.6.1.17 | INTEGER (1..2) | RO | mandatory | |||||||||||||
scalar · INTEGER (1..2) · read-only · mandatory The number of licensed wireless ports. Upgrade this to 2 ports by setting the hardware upgrade license key. | |||||||||||||||||
| NhzIduSwInventory | 1.3.6.1.4.1.7262.2.3.1.6.2 | ||||||||||||||||
| ShzIduSwInvSystemOmniVersionNo | 1.3.6.1.4.1.7262.2.3.1.6.2.1 | DisplayString | RO | mandatory | 1.02.02 | ||||||||||||
scalar · DisplayString · read-only · mandatory The version number of the Omni. Example values from LibreNMS test devices
| |||||||||||||||||
| ShzIduSwInvModemOmniVersionNo | 1.3.6.1.4.1.7262.2.3.1.6.2.2 | DisplayString | RO | mandatory | |||||||||||||
scalar · DisplayString · read-only · mandatory The version number of the Modem FPGA. | |||||||||||||||||
| ShzIduSwInvFrequencyFileVersionNo | 1.3.6.1.4.1.7262.2.3.1.6.2.3 | DisplayString | RO | mandatory | |||||||||||||
scalar · DisplayString · read-only · mandatory The version number of the FrequencyFile. | |||||||||||||||||
| ShzIduSwInvMibVersionNo | 1.3.6.1.4.1.7262.2.3.1.6.2.4 | DisplayString | RO | mandatory | |||||||||||||
scalar · DisplayString · read-only · mandatory The version number of the MIB. | |||||||||||||||||
| ShzIduSwInvRadio1FirmwareVersionNo | 1.3.6.1.4.1.7262.2.3.1.6.2.5 | DisplayString | RO | mandatory | |||||||||||||
scalar · DisplayString · read-only · mandatory The version of radio 1 firmware. | |||||||||||||||||
| ShzIduSwInvRadio2FirmwareVersionNo | 1.3.6.1.4.1.7262.2.3.1.6.2.6 | DisplayString | RO | mandatory | |||||||||||||
scalar · DisplayString · read-only · mandatory The version of radio 2 firmware. | |||||||||||||||||
| NhzIduAtpc | 1.3.6.1.4.1.7262.2.3.1.7 | ||||||||||||||||
| ShzIduAtpcEnable | 1.3.6.1.4.1.7262.2.3.1.7.1 | INTEGER | RW | mandatory | |||||||||||||
scalar · INTEGER · read-write · mandatory Indicates whether Automatic Transmit Power Control (ATPC) is enabled.
| |||||||||||||||||
| ShzIduAtpcStatus | 1.3.6.1.4.1.7262.2.3.1.7.2 | DisplayString | RO | mandatory | |||||||||||||
scalar · DisplayString · read-only · mandatory Indicates the actual condition of ATPC: Enabled if config is on and no issues Auto-Disabled if ATPC coordinated power condition, AAM triggered, or radio loss of link Disabled-manual if config set to off | |||||||||||||||||
| ShzIduAtpcCoordinatedPower | 1.3.6.1.4.1.7262.2.3.1.7.3 | DisplayString | RW | mandatory | |||||||||||||
scalar · DisplayString · read-write · mandatory The Coordinated Power can be enabled by specifying the coordinated power status and coordinated power offset in a string with the following format (without the single quotes): '<on [offset] | off>' The offset can optionally be specified after the 'on' string and after a single space and can be be between 0.0 and 10.0 inclusive. The 'offset' is represented in dBm and indicates the offset below TxPower. The accuracy is limited to tenths of dBm so an offset of 9.99 is recognized as 9.9 dBm. Examples: 'on 5.5' or 'off' | |||||||||||||||||
| NhzIduAam | 1.3.6.1.4.1.7262.2.3.1.8 | ||||||||||||||||
| ShzIduAamStatus | 1.3.6.1.4.1.7262.2.3.1.8.1 | INTEGER | RW | mandatory | |||||||||||||
scalar · INTEGER · read-write · mandatory Read or set the Automatic Adaptive Modulation (AAM) as 'on' or 'off'.
| |||||||||||||||||
| NhzIduAamDiagnostics | 1.3.6.1.4.1.7262.2.3.1.8.2 | ||||||||||||||||
| ShzIduAamDiagnose | 1.3.6.1.4.1.7262.2.3.1.8.2.1 | INTEGER | WO | mandatory | |||||||||||||
scalar · INTEGER · write-only · mandatory This write-only object accepts either 'up' or 'down' to diagnose whether the modulation speed can be increased or decreased respectively. Poll the hzIduAamDiagnosticResult object to determine the results.
| |||||||||||||||||
| ShzIduAamDiagnosticResult | 1.3.6.1.4.1.7262.2.3.1.8.2.2 | DisplayString | RO | mandatory | |||||||||||||
scalar · DisplayString · read-only · mandatory The result from AAM Diagnostic is read from this object. | |||||||||||||||||
| NhzIduPeerSysInfo | 1.3.6.1.4.1.7262.2.3.1.9 | ||||||||||||||||
| ShzIduPeerMacAddress | 1.3.6.1.4.1.7262.2.3.1.9.1 | DisplayString | RO | mandatory | |||||||||||||
scalar · DisplayString · read-only · mandatory The MAC Address of the peer network interface card. | |||||||||||||||||
| ShzIduPeerIpAddress | 1.3.6.1.4.1.7262.2.3.1.9.2 | IpAddress | RO | mandatory | |||||||||||||
scalar · IpAddress · read-only · mandatory The IP Address of the peer network interface card. | |||||||||||||||||
| ShzIduPeerSubnetMask | 1.3.6.1.4.1.7262.2.3.1.9.3 | IpAddress | RO | mandatory | |||||||||||||
scalar · IpAddress · read-only · mandatory The subnet mask for the peer network interface card. | |||||||||||||||||
| NhzIduAuthentication | 1.3.6.1.4.1.7262.2.3.2 | ||||||||||||||||
| ShzIduUniquePeerAuthenticationKey | 1.3.6.1.4.1.7262.2.3.2.1 | DisplayString (SIZE (0..34)) | RW | mandatory | |||||||||||||
scalar · DisplayString (SIZE (0..34)) · read-write · mandatory The serial number of the peer node that this node will communicate with. This is only used when authentication mode is set to unique. | |||||||||||||||||
| ShzIduPeerDetectedSerialNumber | 1.3.6.1.4.1.7262.2.3.2.2 | DisplayString | RO | mandatory | |||||||||||||
scalar · DisplayString · read-only · mandatory The serial number of the peer node that the system is presently communicating with. This is only used when authentication is set to unique. | |||||||||||||||||
| ShzIduAuthenticationMode | 1.3.6.1.4.1.7262.2.3.2.3 | INTEGER | RW | mandatory | |||||||||||||
scalar · INTEGER · read-write · mandatory This sets the authentication mode for the system.If configured for unique authentication, an horizon node only exchanges user traffic with one other horizon node. The serial number is used in this case. If configured for group authentication, an horizon node exchanges user traffic with another horizon node of the same group and uses the authentication keys.
| |||||||||||||||||
| ShzIduAuthenticationFailureAction | 1.3.6.1.4.1.7262.2.3.2.4 | INTEGER | RW | mandatory | |||||||||||||
scalar · INTEGER · read-write · mandatory This sets the authentication failure action for the system. Block traffic will block all user traffic including remote management access. Pass traffic will allow all user traffic to be sent and recieved
| |||||||||||||||||
| ShzIduPeerAuthenticationStatus | 1.3.6.1.4.1.7262.2.3.2.5 | INTEGER | RO | mandatory | |||||||||||||
scalar · INTEGER · read-only · mandatory Specifies the current authentication status of the system. Authenticated means authentication is on and the system has been authenticated, notAuthenticated means authentication is off or the system has not communicated yet with the other node, explicit authentication failure means authentication is on and authentication has failed
| |||||||||||||||||
| NhzIduNetworkManagement | 1.3.6.1.4.1.7262.2.3.3 | ||||||||||||||||
| ShzIduMacAddress | 1.3.6.1.4.1.7262.2.3.3.1 | DisplayString | RO | mandatory | |||||||||||||
scalar · DisplayString · read-only · mandatory The MAC Address of the network interface card. | |||||||||||||||||
| ShzIduNetworkManagementInterface | 1.3.6.1.4.1.7262.2.3.3.2 | INTEGER | RO | mandatory | |||||||||||||
scalar · INTEGER · read-only · mandatory Describes the network management interface connection options.
| |||||||||||||||||
| ShzIduIpAddress | 1.3.6.1.4.1.7262.2.3.3.3 | IpAddress | RO | mandatory | |||||||||||||
scalar · IpAddress · read-only · mandatory The IP Address of the network interface card. | |||||||||||||||||
| ShzIduSubnetMask | 1.3.6.1.4.1.7262.2.3.3.4 | IpAddress | RO | mandatory | |||||||||||||
scalar · IpAddress · read-only · mandatory The subnet mask for the network interface card. | |||||||||||||||||
| ShzIduDefaultGateway | 1.3.6.1.4.1.7262.2.3.3.5 | IpAddress | RO | mandatory | |||||||||||||
scalar · IpAddress · read-only · mandatory The default gateway for the network interface card | |||||||||||||||||
| ShzIduTelnetAccessMode | 1.3.6.1.4.1.7262.2.3.3.6 | INTEGER | RW | mandatory | |||||||||||||
scalar · INTEGER · read-write · mandatory Indicates whether Telnet access is allowed.
| |||||||||||||||||
| ShzIduSshAccessMode | 1.3.6.1.4.1.7262.2.3.3.7 | INTEGER | RW | mandatory | |||||||||||||
scalar · INTEGER · read-write · mandatory Indicates whether ssh access is allowed.
| |||||||||||||||||
| ShzIduVlanTagEnable | 1.3.6.1.4.1.7262.2.3.3.8 | INTEGER | RW | mandatory | |||||||||||||
scalar · INTEGER · read-write · mandatory Indicates whether VLAN tagging is enabled.
| |||||||||||||||||
| ShzIduVlanTagId | 1.3.6.1.4.1.7262.2.3.3.9 | INTEGER | RW | mandatory | |||||||||||||
| ShzIduVlanTagPriority | 1.3.6.1.4.1.7262.2.3.3.10 | INTEGER | RW | mandatory | |||||||||||||
| NhzIduNetworkInterface | 1.3.6.1.4.1.7262.2.3.4 | ||||||||||||||||
| NhzIduEnetPort1 | 1.3.6.1.4.1.7262.2.3.4.1 | ||||||||||||||||
| ShzIduEnetPort1Description | 1.3.6.1.4.1.7262.2.3.4.1.1 | DisplayString | RO | mandatory | |||||||||||||
scalar · DisplayString · read-only · mandatory Describes the functionality of the port1 | |||||||||||||||||
| NhzIduEnetPort1Config | 1.3.6.1.4.1.7262.2.3.4.1.2 | ||||||||||||||||
| ShzIduEnetPort1AutoNegotiation | 1.3.6.1.4.1.7262.2.3.4.1.2.1 | INTEGER | RW | mandatory | |||||||||||||
scalar · INTEGER · read-write · mandatory Turns auto-negotiation on or off for Ethernet Port1. Turning off results in the interface defaulting to 100BaseT, Full Duplex.
| |||||||||||||||||
| ShzIduEnetPort1Speed | 1.3.6.1.4.1.7262.2.3.4.1.2.2 | INTEGER | RW | mandatory | |||||||||||||
scalar · INTEGER · read-write · mandatory Configure the port1 interface speed .
| |||||||||||||||||
| ShzIduEnetPort1Duplex | 1.3.6.1.4.1.7262.2.3.4.1.2.3 | INTEGER | RO | mandatory | |||||||||||||
scalar · INTEGER · read-only · mandatory Configure the port1 interface duplex.
| |||||||||||||||||
| ShzIduEnetPort1Media | 1.3.6.1.4.1.7262.2.3.4.1.2.4 | INTEGER | RW | mandatory | |||||||||||||
scalar · INTEGER · read-write · mandatory Configure the port1 interface media.
| |||||||||||||||||
| ShzIduEnetPort1AdminState | 1.3.6.1.4.1.7262.2.3.4.1.2.5 | INTEGER | RW | mandatory | |||||||||||||
scalar · INTEGER · read-write · mandatory Configure the port1 interface media.
| |||||||||||||||||
| ShzIduEnetPort1OpticalTransceiverState | 1.3.6.1.4.1.7262.2.3.4.1.2.6 | INTEGER | RW | mandatory | |||||||||||||
scalar · INTEGER · read-write · mandatory When it is on, optical transmitter for port1 is enabled. Otherwise optical transmitter is disabled.
| |||||||||||||||||
| ShzIduEnetPort1PauseFrameEnable | 1.3.6.1.4.1.7262.2.3.4.1.2.7 | INTEGER | RW | mandatory | |||||||||||||
scalar · INTEGER · read-write · mandatory When PAUSE is enabled, port1 pause frames can be generated by the system and the pause frames will flow toward the link partner on the network. When PAUSE is not enabled, no pause frames will be generated by the system.
| |||||||||||||||||
| ShzIduEnetPort1MaxFrameSize | 1.3.6.1.4.1.7262.2.3.4.1.2.8 | INTEGER (1600..9600) | RW | mandatory | |||||||||||||
scalar · INTEGER (1600..9600) · read-write · mandatory For port1 the default maximum frame size is 1600 bytes. The settable maximum frame size must be a multiple of 128. If the chosen maximum frame size is not a multiple of 128, its closest number which is a multiple of 128 is actually used. The settable lowest maximum frame size is 1664, and the settable highest maximum frame size is 9600. If the chosen maximum frame size is out of this range, the default maximum frame size of 1600 is used. | |||||||||||||||||
| ShzIduEnetPort1DroppedEnetFramesThresholdParameters | 1.3.6.1.4.1.7262.2.3.4.1.2.9 | DisplayString (SIZE (0..24)) | RW | mandatory | |||||||||||||
scalar · DisplayString (SIZE (0..24)) · read-write · mandatory A read-write string: The threshold, in percent, and the number of seconds that it must exceed this threshold are programmed by the user. An example of the format of the string is as follows: '70 10'. The first parameter is the percentage of frames that are dropped, the second is the time in seconds that the threshold must be exceeded. The single quote marks i.e. ' ' are not used in the command. | |||||||||||||||||
| ShzIduEnetPort1BandwidthUtilizationThresholdParameters | 1.3.6.1.4.1.7262.2.3.4.1.2.10 | DisplayString (SIZE (0..24)) | RW | mandatory | |||||||||||||
scalar · DisplayString (SIZE (0..24)) · read-write · mandatory A read-write string: The percentage of available bandwidth threshold and the number of seconds that it must exceed this threshold are programmed by the user. An example of the format of the string is as follows: '70 10'. The first parameter is the threshold point in percent, the number of seconds that the threshold must be exceeded. The single quote marks i.e. ' ' are not used in the command. | |||||||||||||||||
| NhzIduEnetPort1Status | 1.3.6.1.4.1.7262.2.3.4.1.3 | ||||||||||||||||
| ShzIduEnetPort1LinkStatus | 1.3.6.1.4.1.7262.2.3.4.1.3.1 | INTEGER | RO | mandatory | |||||||||||||
scalar · INTEGER · read-only · mandatory Indicates the port1 link status.
| |||||||||||||||||
| ShzIduEnetPort1AutoNegotiationStatus | 1.3.6.1.4.1.7262.2.3.4.1.3.2 | INTEGER | RO | mandatory | |||||||||||||
scalar · INTEGER · read-only · mandatory Indicates the port1 AutoNegotiation status.
| |||||||||||||||||
| ShzIduEnetPort1SpeedStatus | 1.3.6.1.4.1.7262.2.3.4.1.3.3 | INTEGER | RO | mandatory | |||||||||||||
scalar · INTEGER · read-only · mandatory Indicates the port1 interface speed status.
| |||||||||||||||||
| ShzIduEnetPort1DuplexStatus | 1.3.6.1.4.1.7262.2.3.4.1.3.4 | INTEGER | RO | mandatory | |||||||||||||
scalar · INTEGER · read-only · mandatory Indicates the port1 interface duplex status.
| |||||||||||||||||
| ShzIduEnetPort1MediaStatus | 1.3.6.1.4.1.7262.2.3.4.1.3.5 | INTEGER | RO | mandatory | |||||||||||||
scalar · INTEGER · read-only · mandatory Indicates the port1 interface media status.
| |||||||||||||||||
| NhzIduEnetPort1Stats | 1.3.6.1.4.1.7262.2.3.4.1.4 | ||||||||||||||||
| ShzIduEnetPort1TxFrames | 1.3.6.1.4.1.7262.2.3.4.1.4.1 | Counter | RO | mandatory | |||||||||||||
scalar · Counter · read-only · mandatory The current count of port1 frames sent. | |||||||||||||||||
| ShzIduEnetPort1TxBytes | 1.3.6.1.4.1.7262.2.3.4.1.4.2 | Counter | RO | mandatory | |||||||||||||
scalar · Counter · read-only · mandatory The current count of port1 bytes sent. | |||||||||||||||||
| ShzIduEnetPort1RxFrames | 1.3.6.1.4.1.7262.2.3.4.1.4.3 | Counter | RO | mandatory | |||||||||||||
scalar · Counter · read-only · mandatory The current count of port1 frames received. | |||||||||||||||||
| ShzIduEnetPort1RxBytes | 1.3.6.1.4.1.7262.2.3.4.1.4.4 | Counter | RO | mandatory | |||||||||||||
scalar · Counter · read-only · mandatory The current count of port1 bytes received. | |||||||||||||||||
| ShzIduEnetPort1RxFramesInErrors | 1.3.6.1.4.1.7262.2.3.4.1.4.5 | Counter | RO | mandatory | 0 | ||||||||||||
scalar · Counter · read-only · mandatory The current count of port1 frames received in error. Example values from LibreNMS test devices
| |||||||||||||||||
| ShzIduEnetPort1RxFramesCRCErrors | 1.3.6.1.4.1.7262.2.3.4.1.4.6 | Counter | RO | mandatory | 0 | ||||||||||||
scalar · Counter · read-only · mandatory The current count of CRC error frames received for port1. Example values from LibreNMS test devices
| |||||||||||||||||
| ShzIduEnetPort1BWUtilization | 1.3.6.1.4.1.7262.2.3.4.1.4.7 | INTEGER | RO | mandatory | |||||||||||||
scalar · INTEGER · read-only · mandatory The carried load over link capacity for port1. | |||||||||||||||||
| ShzIduEnetPort1IngressDataRate | 1.3.6.1.4.1.7262.2.3.4.1.4.8 | INTEGER | RO | mandatory | |||||||||||||
scalar · INTEGER · read-only · mandatory The data rate coming into the ethernet for port1.
The data rate you see is multiplied by 100. e.g. A display
of 1530 is actually 15.30 Mpbs | |||||||||||||||||
| ShzIduEnetPort1EgressDataRate | 1.3.6.1.4.1.7262.2.3.4.1.4.9 | INTEGER | RO | mandatory | |||||||||||||
scalar · INTEGER · read-only · mandatory The data rate going out of the ethernet for port1.
The data rate you see is multiplied by 100. e.g. A display
of 1530 is actually 15.30 Mpbs. | |||||||||||||||||
| ShzIduEnetPort1FramesInQueue1s | 1.3.6.1.4.1.7262.2.3.4.1.4.10 | Counter | RO | mandatory | |||||||||||||
scalar · Counter · read-only · mandatory The current count of port1 frames passed through queue 1. | |||||||||||||||||
| ShzIduEnetPort1FramesInQueue2s | 1.3.6.1.4.1.7262.2.3.4.1.4.11 | Counter | RO | mandatory | |||||||||||||
scalar · Counter · read-only · mandatory The current count of port1 frames passed through queue 2. | |||||||||||||||||
| ShzIduEnetPort1FramesInQueue3s | 1.3.6.1.4.1.7262.2.3.4.1.4.12 | Counter | RO | mandatory | |||||||||||||
scalar · Counter · read-only · mandatory The current count of NIC frames passed through queue 3. | |||||||||||||||||
| ShzIduEnetPort1FramesInQueue4s | 1.3.6.1.4.1.7262.2.3.4.1.4.13 | Counter | RO | mandatory | |||||||||||||
scalar · Counter · read-only · mandatory The current count of NIC frames passed through queue 4. | |||||||||||||||||
| ShzIduEnetPort1FramesInQueue1Discardeds | 1.3.6.1.4.1.7262.2.3.4.1.4.14 | Counter | RO | mandatory | |||||||||||||
scalar · Counter · read-only · mandatory The current count of NIC frames received in queue 2 that were discarded, but due to an error. One possible reason is lack of buffer space. | |||||||||||||||||
| ShzIduEnetPort1FramesInQueue2Discardeds | 1.3.6.1.4.1.7262.2.3.4.1.4.15 | Counter | RO | mandatory | |||||||||||||
scalar · Counter · read-only · mandatory The current count of port1 frames received in queue 2 that were discarded, but due to an error. One possible reason is lack of buffer space. | |||||||||||||||||
| ShzIduEnetPort1FramesInQueue3Discardeds | 1.3.6.1.4.1.7262.2.3.4.1.4.16 | Counter | RO | mandatory | |||||||||||||
scalar · Counter · read-only · mandatory The current count of port1 frames received in queue 3 that were discarded, but due to an error. One possible reason is lack of buffer space. | |||||||||||||||||
| ShzIduEnetPort1FramesInQueue4Discardeds | 1.3.6.1.4.1.7262.2.3.4.1.4.17 | Counter | RO | mandatory | |||||||||||||
scalar · Counter · read-only · mandatory The current count of port1 frames received in queue 4 that were discarded, but due to an error. One possible reason is lack of buffer space. | |||||||||||||||||
| NhzIduEnetPort2 | 1.3.6.1.4.1.7262.2.3.4.2 | ||||||||||||||||
| ShzIduEnetPort2Description | 1.3.6.1.4.1.7262.2.3.4.2.1 | DisplayString | RO | mandatory | |||||||||||||
scalar · DisplayString · read-only · mandatory Describes the functionality of the port2 | |||||||||||||||||
| NhzIduEnetPort2Config | 1.3.6.1.4.1.7262.2.3.4.2.2 | ||||||||||||||||
| ShzIduEnetPort2AutoNegotiation | 1.3.6.1.4.1.7262.2.3.4.2.2.1 | INTEGER | RW | mandatory | |||||||||||||
scalar · INTEGER · read-write · mandatory Turns auto-negotiation on or off for Ethernet Port2. Turning off results in the interface defaulting to 100BaseT, Full Duplex.
| |||||||||||||||||
| ShzIduEnetPort2Speed | 1.3.6.1.4.1.7262.2.3.4.2.2.2 | INTEGER | RW | mandatory | |||||||||||||
scalar · INTEGER · read-write · mandatory Configure the port1 interface speed .
| |||||||||||||||||
| ShzIduEnetPort2Duplex | 1.3.6.1.4.1.7262.2.3.4.2.2.3 | INTEGER | RO | mandatory | |||||||||||||
scalar · INTEGER · read-only · mandatory Configure the port1 interface duplex.
| |||||||||||||||||
| ShzIduEnetPort2AdminState | 1.3.6.1.4.1.7262.2.3.4.2.2.4 | INTEGER | RO | mandatory | |||||||||||||
scalar · INTEGER · read-only · mandatory Configure the port2 shutdown media.
| |||||||||||||||||
| NhzIduEnetPort2Status | 1.3.6.1.4.1.7262.2.3.4.2.3 | ||||||||||||||||
| ShzIduEnetPort2LinkStatus | 1.3.6.1.4.1.7262.2.3.4.2.3.1 | INTEGER | RO | mandatory | |||||||||||||
scalar · INTEGER · read-only · mandatory Indicates the Port2 link status.
| |||||||||||||||||
| ShzIduEnetPort2AutoNegotiationStatus | 1.3.6.1.4.1.7262.2.3.4.2.3.2 | INTEGER | RO | mandatory | |||||||||||||
scalar · INTEGER · read-only · mandatory Indicates the Port2 AutoNegotiation status.
| |||||||||||||||||
| ShzIduEnetPort2SpeedStatus | 1.3.6.1.4.1.7262.2.3.4.2.3.3 | INTEGER | RO | mandatory | |||||||||||||
scalar · INTEGER · read-only · mandatory Indicates the Port2 interface speed status.
| |||||||||||||||||
| ShzIduEnetPort2DuplexStatus | 1.3.6.1.4.1.7262.2.3.4.2.3.4 | INTEGER | RO | mandatory | |||||||||||||
scalar · INTEGER · read-only · mandatory Indicates the Port2 interface duplex status.
| |||||||||||||||||
| NhzIduEnetPort2Stats | 1.3.6.1.4.1.7262.2.3.4.2.4 | ||||||||||||||||
| ShzIduEnetPort2TxFrames | 1.3.6.1.4.1.7262.2.3.4.2.4.1 | Counter | RO | mandatory | |||||||||||||
scalar · Counter · read-only · mandatory The current count of Port2 frames sent. | |||||||||||||||||
| ShzIduEnetPort2TxBytes | 1.3.6.1.4.1.7262.2.3.4.2.4.2 | Counter | RO | mandatory | |||||||||||||
scalar · Counter · read-only · mandatory The current count of Port2 bytes sent. | |||||||||||||||||
| ShzIduEnetPort2RxFrames | 1.3.6.1.4.1.7262.2.3.4.2.4.3 | Counter | RO | mandatory | |||||||||||||
scalar · Counter · read-only · mandatory The current count of Port2 frames received. | |||||||||||||||||
| ShzIduEnetPort2RxBytes | 1.3.6.1.4.1.7262.2.3.4.2.4.4 | Counter | RO | mandatory | |||||||||||||
scalar · Counter · read-only · mandatory The current count of Port2 bytes received. | |||||||||||||||||
| ShzIduEnetPort2RxFramesInErrors | 1.3.6.1.4.1.7262.2.3.4.2.4.5 | Counter | RO | mandatory | 0 | ||||||||||||
scalar · Counter · read-only · mandatory The current count of Port2 frames received in error. Example values from LibreNMS test devices
| |||||||||||||||||
| ShzIduEnetPort2RxFramesCrcErrors | 1.3.6.1.4.1.7262.2.3.4.2.4.6 | Counter | RO | mandatory | 0 | ||||||||||||
scalar · Counter · read-only · mandatory The current count of CRC error frames received for Port2. Example values from LibreNMS test devices
| |||||||||||||||||
| NhzIduWirelessInterface | 1.3.6.1.4.1.7262.2.3.5 | ||||||||||||||||
| NhzIduWirelessInterfaceNames | 1.3.6.1.4.1.7262.2.3.5.1 | ||||||||||||||||
| ThzIduWirelessInterfaceNameTable | 1.3.6.1.4.1.7262.2.3.5.1.1 | NA | mandatory | ||||||||||||||
table · not-accessible · mandatory A table of Wireless Interface Modems | |||||||||||||||||
| RhzIduWirelessInterfaceNameEntry | 1.3.6.1.4.1.7262.2.3.5.1.1.1 | NA | mandatory | ||||||||||||||
| ChzIduWirelessInterfaceNameIndex | 1.3.6.1.4.1.7262.2.3.5.1.1.1.1 | INTEGER | RO | mandatory | |||||||||||||
column · INTEGER · read-only · mandatory A unique value for each interface.
| |||||||||||||||||
| ChzIduWirelessInterfaceName | 1.3.6.1.4.1.7262.2.3.5.1.1.1.2 | DisplayString | RO | mandatory | |||||||||||||
column · DisplayString · read-only · mandatory Describes the functionality of the Wireless Interface | |||||||||||||||||
| NhzIduWirelessInterfaceModems | 1.3.6.1.4.1.7262.2.3.5.2 | ||||||||||||||||
| NhzIduAggregatedWirelessPortStats | 1.3.6.1.4.1.7262.2.3.5.2.1 | ||||||||||||||||
| ShzIduAggregatedWirelessPortTxFrames | 1.3.6.1.4.1.7262.2.3.5.2.1.1 | Counter | RO | mandatory | |||||||||||||
scalar · Counter · read-only · mandatory The current count of Ethernet Combiner frames sent. | |||||||||||||||||
| ShzIduAggregatedWirelessPortRxFramesOKs | 1.3.6.1.4.1.7262.2.3.5.2.1.2 | Counter | RO | mandatory | |||||||||||||
scalar · Counter · read-only · mandatory The current count of good Ethernet Combiner frames received. | |||||||||||||||||
| ShzIduAggregatedWirelessPortRxFrameErrors | 1.3.6.1.4.1.7262.2.3.5.2.1.3 | Counter | RO | mandatory | |||||||||||||
scalar · Counter · read-only · mandatory The current count of Ethernet Combiner frames received in error. | |||||||||||||||||
| ShzIduAggregatedWirelessPortRxFramesQueueDiscards | 1.3.6.1.4.1.7262.2.3.5.2.1.4 | Counter | RO | mandatory | |||||||||||||
scalar · Counter · read-only · mandatory The current count of Ethernet Combiner frames in the queue that were discarded. | |||||||||||||||||
| ThzIduModemTable | 1.3.6.1.4.1.7262.2.3.5.2.2 | NA | mandatory | ||||||||||||||
table · not-accessible · mandatory A table of Wireless Interface Modems | |||||||||||||||||
| RhzIduModemEntry | 1.3.6.1.4.1.7262.2.3.5.2.2.1 | NA | mandatory | ||||||||||||||
| ChzIduModemIndex | 1.3.6.1.4.1.7262.2.3.5.2.2.1.1 | INTEGER | RO | mandatory | |||||||||||||
column · INTEGER · read-only · mandatory A unique value for each interface.
| |||||||||||||||||
| ChzIduModemOperStatus | 1.3.6.1.4.1.7262.2.3.5.2.2.1.2 | INTEGER | RO | mandatory | |||||||||||||
column · INTEGER · read-only · mandatory The current operational state of the interface. Testing indicates that no operational packets can be passed.
| |||||||||||||||||
| ChzIduModemReset | 1.3.6.1.4.1.7262.2.3.5.2.2.1.3 | INTEGER (0..1) | WO | mandatory | |||||||||||||
column · INTEGER (0..1) · write-only · mandatory Writing 1 to this object causes the modem card to be reset. All other values are not recognized. This variable always reads back as 0. mdmOperStatus should be polled by the user after this object is written to, to verify that the modem card has been reset. Not applicable in this release | |||||||||||||||||
| ChzIduModemChannelizedRSL | 1.3.6.1.4.1.7262.2.3.5.2.2.1.4 | INTEGER | RO | mandatory | -416 | ||||||||||||
column · INTEGER · read-only · mandatory An estimate of the modem's channelized RSL. Divide the value by 10 to get the actual RSL value. Once this number is divided by 10 the units are dBm. For example 352 is actually -35.2dBm Example values from LibreNMS test devices
| |||||||||||||||||
| ChzIduModemChannelizedRSLUnsignedInt | 1.3.6.1.4.1.7262.2.3.5.2.2.1.5 | INTEGER | RO | mandatory | |||||||||||||
column · INTEGER · read-only · mandatory The absolute value of the estimate of the modem's channelized RSL. Divide the value by 10 to get the actual RSL value. Once this number is divided by 10 the units are dBm. For example -352 is actually -35.2dBm | |||||||||||||||||
| ChzIduModemModulationType | 1.3.6.1.4.1.7262.2.3.5.2.2.1.6 | INTEGER | RO | mandatory | qam256(7) | ||||||||||||
column · INTEGER · read-only · mandatory The modulation type of the modem, distinguished according to the physical/link protocol.
Example values from LibreNMS test devices
| |||||||||||||||||
| ChzIduModemRxSpeed | 1.3.6.1.4.1.7262.2.3.5.2.2.1.7 | INTEGER | RO | mandatory | |||||||||||||
column · INTEGER · read-only · mandatory An estimate of the modem's current Rx bandwidth in bits per second. Divide the value by 10000 to get the actual data rate in Mbps | |||||||||||||||||
| ChzIduModemTxSpeed | 1.3.6.1.4.1.7262.2.3.5.2.2.1.8 | INTEGER | RO | mandatory | |||||||||||||
column · INTEGER · read-only · mandatory An estimate of the modem's current Tx bandwidth in bits per second. Divide the value by 10000 to get the actual data rate in Mbps | |||||||||||||||||
| ChzIduModemSNR | 1.3.6.1.4.1.7262.2.3.5.2.2.1.9 | INTEGER | RO | mandatory | 341 | ||||||||||||
column · INTEGER · read-only · mandatory SNR value in dB. Divide the value by 10 to get the actual SNR. Example values from LibreNMS test devices
| |||||||||||||||||
| ChzIduModemEbToNoiseRatio | 1.3.6.1.4.1.7262.2.3.5.2.2.1.10 | INTEGER | RO | mandatory | |||||||||||||
column · INTEGER · read-only · mandatory The ratio of the modem Estimated Energy per information bit to Noise power spectral density. Divide the value by 10 to get the actual EbToNoiseRatio | |||||||||||||||||
| ChzIduModemEqualizerStress | 1.3.6.1.4.1.7262.2.3.5.2.2.1.11 | INTEGER | RO | mandatory | |||||||||||||
column · INTEGER · read-only · mandatory Indicates the average magnitude of all the equalizer taps to provide a measure of how hard the equalizer is working. | |||||||||||||||||
| ChzIduModemSNRThresholdParameters | 1.3.6.1.4.1.7262.2.3.5.2.2.1.12 | DisplayString (SIZE (0..24)) | RW | mandatory | |||||||||||||
column · DisplayString (SIZE (0..24)) · read-write · mandatory A read-write string | |||||||||||||||||
| ChzIduModemChannelizedRslBelowThresholdParameters | 1.3.6.1.4.1.7262.2.3.5.2.2.1.13 | DisplayString (SIZE (0..24)) | RW | mandatory | |||||||||||||
column · DisplayString (SIZE (0..24)) · read-write · mandatory A read-write string: The threshold in dBm and the number of seconds threshold are programmed by the user. An example of the format of the string is as follows: '-75 10'. The first parameter power level in dBm, the second is the time in seconds that the threshold must be exceeded. In this example the threshold -75 dBm and the time is set to 10 seconds. The single quote marks i.e. ' ' are not used in the command. | |||||||||||||||||
| ThzIduModemStatsTable | 1.3.6.1.4.1.7262.2.3.5.2.3 | NA | mandatory | ||||||||||||||
table · not-accessible · mandatory A table of Wireless Interface Modem Statistics | |||||||||||||||||
| RhzIduModemStatsEntry | 1.3.6.1.4.1.7262.2.3.5.2.3.1 | NA | mandatory | ||||||||||||||
| ChzIduModemStatsIndex | 1.3.6.1.4.1.7262.2.3.5.2.3.1.1 | INTEGER | RO | mandatory | |||||||||||||
column · INTEGER · read-only · mandatory A unique value for each interface.
| |||||||||||||||||
| ChzIduModemTxBlocks | 1.3.6.1.4.1.7262.2.3.5.2.3.1.2 | Counter | RO | mandatory | |||||||||||||
column · Counter · read-only · mandatory The current count of Modem blocks transmitted. | |||||||||||||||||
| ChzIduModemRxBlocksOKs | 1.3.6.1.4.1.7262.2.3.5.2.3.1.3 | Counter | RO | mandatory | |||||||||||||
column · Counter · read-only · mandatory The current count of Modem blocks received. | |||||||||||||||||
| ChzIduModemRxBlocksErrors | 1.3.6.1.4.1.7262.2.3.5.2.3.1.4 | Counter | RO | mandatory | 19998136 | ||||||||||||
column · Counter · read-only · mandatory The current count of Modem blocks received in error. Example values from LibreNMS test devices
| |||||||||||||||||
| NhzIduWirelessInterfaceIFCards | 1.3.6.1.4.1.7262.2.3.5.3 | ||||||||||||||||
| ThzIduIntermediateFrequencyCardTable | 1.3.6.1.4.1.7262.2.3.5.3.1 | NA | mandatory | ||||||||||||||
table · not-accessible · mandatory A table of Wireless Interface Modems | |||||||||||||||||
| RhzIduIntermediateFrequencyCardEntry | 1.3.6.1.4.1.7262.2.3.5.3.1.1 | NA | mandatory | ||||||||||||||
| ChzIduIFCardIndex | 1.3.6.1.4.1.7262.2.3.5.3.1.1.1 | INTEGER | RO | mandatory | |||||||||||||
column · INTEGER · read-only · mandatory A unique value for each interface.
| |||||||||||||||||
| ChzIduIFCardTxSynthesizerLock | 1.3.6.1.4.1.7262.2.3.5.3.1.1.2 | INTEGER | RO | mandatory | |||||||||||||
column · INTEGER · read-only · mandatory Indicates if the transmit synthesizer is locked.
| |||||||||||||||||
| ChzIduIFCardRxSynthesizerLock | 1.3.6.1.4.1.7262.2.3.5.3.1.1.3 | INTEGER | RO | mandatory | |||||||||||||
column · INTEGER · read-only · mandatory Indicates if the receive synthesizer is locked.
| |||||||||||||||||
| NhzIduWirelessInterfaceRadios | 1.3.6.1.4.1.7262.2.3.5.4 | ||||||||||||||||
| ThzIduRadioTable | 1.3.6.1.4.1.7262.2.3.5.4.1 | NA | mandatory | ||||||||||||||
table · not-accessible · mandatory A table of Wireless Interface Radios | |||||||||||||||||
| RhzIduRadioEntry | 1.3.6.1.4.1.7262.2.3.5.4.1.1 | NA | mandatory | ||||||||||||||
| ChzIduRadioIndex | 1.3.6.1.4.1.7262.2.3.5.4.1.1.1 | INTEGER | RO | mandatory | |||||||||||||
column · INTEGER · read-only · mandatory A unique value for each interface.
| |||||||||||||||||
| ChzIduRadioDescription | 1.3.6.1.4.1.7262.2.3.5.4.1.1.2 | DisplayString | RO | mandatory | |||||||||||||
column · DisplayString · read-only · mandatory A textual string containing information about the radio. Includes the manufacturer, product name, software version, serial number, and hardware version of the radio. | |||||||||||||||||
| ChzIduRadioOperStatus | 1.3.6.1.4.1.7262.2.3.5.4.1.1.3 | INTEGER | RO | mandatory | |||||||||||||
column · INTEGER · read-only · mandatory The current operational state of the interface. Testing indicates that no operational packets can be passed. Testing also indicates that a firmware upgrade may be in progress
| |||||||||||||||||
| ChzIduRadioLastChanged | 1.3.6.1.4.1.7262.2.3.5.4.1.1.4 | TimeTicks | RO | mandatory | |||||||||||||
column · TimeTicks · read-only · mandatory The value of sysUpTime at the time the radio entered its current operational state. If the current state was entered prior to the last re-initialization of the local network management subsystem, then this object contains a zero value. | |||||||||||||||||
| ChzIduRadioReceiveSignalLevel | 1.3.6.1.4.1.7262.2.3.5.4.1.1.5 | INTEGER | RO | mandatory | |||||||||||||
column · INTEGER · read-only · mandatory The Received Signal Level indicates the power of the receive level in dBm. The number is divided by 10 to get the actual dBm. For example, -432 is actually -43.2dBm. | |||||||||||||||||
| ChzIduRadioReceiveSignalLevelUnsigned | 1.3.6.1.4.1.7262.2.3.5.4.1.1.6 | INTEGER | RO | mandatory | |||||||||||||
column · INTEGER · read-only · mandatory The Received Signal Level indicates the power of the receive level in dBm. The number is divided by -10. e.g. 432 is actually -43.2dBm. Object provided to accomodate plotting of negative RSL values which is not supported in some EMS (i.e.: CastleRock). Please use 'hzIduRadioReceiveSignalLevel' object if your EMS supports plotting of negative integers. | |||||||||||||||||
| ChzIduRadioTxGain | 1.3.6.1.4.1.7262.2.3.5.4.1.1.7 | INTEGER | RO | mandatory | |||||||||||||
column · INTEGER · read-only · mandatory The gain of the radio in the transmit chain. Indicates the gain in dB. | |||||||||||||||||
| ChzIduRadioRxGain | 1.3.6.1.4.1.7262.2.3.5.4.1.1.8 | INTEGER | RO | mandatory | |||||||||||||
column · INTEGER · read-only · mandatory The gain of the radio in the receive chain. Indicates the gain in dB. | |||||||||||||||||
| ChzIduRadioReset | 1.3.6.1.4.1.7262.2.3.5.4.1.1.9 | INTEGER | WO | mandatory | |||||||||||||
column · INTEGER · write-only · mandatory Writing 1 to this object causes the radio to be reset. All other values are not recognized. This variable always reads back as 0. radioOperStatus should be polled by the user after this object is written to, to verify that the radio card has been reset. | |||||||||||||||||
| ChzIduRadioTransmitPowerdBm | 1.3.6.1.4.1.7262.2.3.5.4.1.1.10 | INTEGER | RW | mandatory | 155 | ||||||||||||
column · INTEGER · read-write · mandatory This defines the transmit level of the radio. If ATPC or AAM is enabled, you can't change the transmit power. The power you see is divided by 10. e.g. A display of 133 is actually 13.3 dBm. If the radio is operational and not muted, it is the current transmitting power. If the radio is operational and muted, it is the programmed transmitting power, and will transmit at this level when the radio is un-muted. If the radio is not operational it is the programmed transmitting power, and will transmit at this level when the radio is operational and not muted. If the radio does not have transmit calibration tables programmed into its EEPROM, this transmit power level cannot be used as it is not possible to accurately calculate the actual transmit level. In this case this object will return -99. Example values from LibreNMS test devices
| |||||||||||||||||
| ChzIduRadioPowerOption | 1.3.6.1.4.1.7262.2.3.5.4.1.1.11 | INTEGER | RO | mandatory | |||||||||||||
column · INTEGER · read-only · mandatory This indicates the power option of the radio: normal or high power.
| |||||||||||||||||
| ChzIduRadioTxState | 1.3.6.1.4.1.7262.2.3.5.4.1.1.12 | INTEGER | RO | mandatory | |||||||||||||
column · INTEGER · read-only · mandatory This indicates the power option of the radio: normal or high power.
| |||||||||||||||||
| ChzIduRadioTemperature | 1.3.6.1.4.1.7262.2.3.5.4.1.1.13 | INTEGER | RO | mandatory | |||||||||||||
column · INTEGER · read-only · mandatory The Radio temperature in degree Celsius. The actual temperature is determined by dividing the number by 10. e.g. 202 is actually 20.2 degrees Celsius. | |||||||||||||||||
| ChzIduRadioRxCableLoss | 1.3.6.1.4.1.7262.2.3.5.4.1.1.14 | DisplayString | RO | mandatory | |||||||||||||
column · DisplayString · read-only · mandatory The Rx Cable Loss in dB. | |||||||||||||||||
| ChzIduRadioTxCableLoss | 1.3.6.1.4.1.7262.2.3.5.4.1.1.15 | DisplayString | RO | mandatory | |||||||||||||
column · DisplayString · read-only · mandatory The Tx Cable Loss in dB. | |||||||||||||||||
| ChzIduRadioTxCableLossChange | 1.3.6.1.4.1.7262.2.3.5.4.1.1.16 | DisplayString | RO | mandatory | |||||||||||||
column · DisplayString · read-only · mandatory The Tx Cable Loss Change is the difference between the configured TxPower and the measured TxPower measured in dB. | |||||||||||||||||
| NhzIduWirelessInterfaceRadioFrequencies | 1.3.6.1.4.1.7262.2.3.5.5 | ||||||||||||||||
| NhzIduWirelessInterfaceRadio1Frequencies | 1.3.6.1.4.1.7262.2.3.5.5.1 | ||||||||||||||||
| ShzIduRadio1Band | 1.3.6.1.4.1.7262.2.3.5.5.1.1 | INTEGER | RW | mandatory | |||||||||||||
scalar · INTEGER · read-write · mandatory The radio frequency standard used for Radio 1. Frequency bands are divided into sub bands. i.e. FCC 23 Ghz Band is comprised of fcc23a, fcc23b, fcc23c and fcc23d which make up the entire FCC23 band
| |||||||||||||||||
| ShzIduRadio1FreqGroupSelected | 1.3.6.1.4.1.7262.2.3.5.5.1.2 | INTEGER | RW | mandatory | |||||||||||||
scalar · INTEGER · read-write · mandatory The frequency group selected for Radio 1. The frequency subbands are divided into frequency groups txHigh and txLow. An horizon system must have one node configured to txLow and the other node configure to txHigh
| |||||||||||||||||
| ThzIduRadio1TxHighFreqTable | 1.3.6.1.4.1.7262.2.3.5.5.1.3 | NA | mandatory | ||||||||||||||
table · not-accessible · mandatory A table of txHigh frequency settings for Radio 1 | |||||||||||||||||
| RhzIduRadio1TxHighFreqEntry | 1.3.6.1.4.1.7262.2.3.5.5.1.3.1 | NA | mandatory | ||||||||||||||
row · not-accessible · mandatory A txHighFrequency entry containing all the frequency values | |||||||||||||||||
| ChzIduRadio1TxHighFreqIndex | 1.3.6.1.4.1.7262.2.3.5.5.1.3.1.1 | INTEGER | RO | mandatory | |||||||||||||
column · INTEGER · read-only · mandatory A unique value for each frequency channel. | |||||||||||||||||
| ChzIduRadio1TxHighFreqChannelIndex | 1.3.6.1.4.1.7262.2.3.5.5.1.3.1.2 | DisplayString | RO | mandatory | |||||||||||||
column · DisplayString · read-only · mandatory The channel index for the frequency. | |||||||||||||||||
| ChzIduRadio1TxHighFreqTransmitRfFrequency | 1.3.6.1.4.1.7262.2.3.5.5.1.3.1.3 | INTEGER | RO | mandatory | |||||||||||||
column · INTEGER · read-only · mandatory The RF TX frequency in KHz. | |||||||||||||||||
| ChzIduRadio1TxHighFreqReceiveRfFrequency | 1.3.6.1.4.1.7262.2.3.5.5.1.3.1.4 | INTEGER | RO | mandatory | |||||||||||||
column · INTEGER · read-only · mandatory The RF RX frequency in KHz. | |||||||||||||||||
| ChzIduRadio1TxHighFreqProgrammed | 1.3.6.1.4.1.7262.2.3.5.5.1.3.1.5 | INTEGER | RW | mandatory | |||||||||||||
column · INTEGER · read-write · mandatory Specifies the operating frequency channel for the modem. ***Only 1 index may be selected in a 1 modem system.
| |||||||||||||||||
| ThzIduRadio1TxLowFreqTable | 1.3.6.1.4.1.7262.2.3.5.5.1.4 | NA | mandatory | ||||||||||||||
table · not-accessible · mandatory A table of txLow frequency settings for Radio 1 | |||||||||||||||||
| RhzIduRadio1TxLowFreqEntry | 1.3.6.1.4.1.7262.2.3.5.5.1.4.1 | NA | mandatory | ||||||||||||||
row · not-accessible · mandatory A hzIduTxLowFrequeny entry containing the frequency values for a specific index | |||||||||||||||||
| ChzIduRadio1TxLowFreqIndex | 1.3.6.1.4.1.7262.2.3.5.5.1.4.1.1 | INTEGER | RO | mandatory | |||||||||||||
column · INTEGER · read-only · mandatory A unique value for each frequency channel. | |||||||||||||||||
| ChzIduRadio1TxLowFreqChannelIndex | 1.3.6.1.4.1.7262.2.3.5.5.1.4.1.2 | DisplayString | RO | mandatory | |||||||||||||
column · DisplayString · read-only · mandatory The channel index for the frequency. | |||||||||||||||||
| ChzIduRadio1TxLowFreqTransmitRfFrequency | 1.3.6.1.4.1.7262.2.3.5.5.1.4.1.3 | INTEGER | RO | mandatory | |||||||||||||
column · INTEGER · read-only · mandatory The RF TX frequency in KHz. | |||||||||||||||||
| ChzIduRadio1TxLowFreqReceiveRfFrequency | 1.3.6.1.4.1.7262.2.3.5.5.1.4.1.4 | INTEGER | RO | mandatory | |||||||||||||
column · INTEGER · read-only · mandatory The RF RX frequency in KHz. | |||||||||||||||||
| ChzIduRadio1TxLowFreqProgrammed | 1.3.6.1.4.1.7262.2.3.5.5.1.4.1.5 | INTEGER | RW | mandatory | |||||||||||||
column · INTEGER · read-write · mandatory Specifies the operating frequency channel for the modem. ***Only 1 index may be selected in a 1 modem system.
| |||||||||||||||||
| NhzIduRadio1ProgrammedFrequency | 1.3.6.1.4.1.7262.2.3.5.5.1.5 | ||||||||||||||||
| ShzIduRadio1ProgrammedFrequencyChannel | 1.3.6.1.4.1.7262.2.3.5.5.1.5.1 | DisplayString | RO | mandatory | |||||||||||||
scalar · DisplayString · read-only · mandatory The channel that has been programmed for Radio 1. | |||||||||||||||||
| ShzIduRadio1ProgrammedFrequencyTxRf | 1.3.6.1.4.1.7262.2.3.5.5.1.5.2 | INTEGER | RO | mandatory | |||||||||||||
scalar · INTEGER · read-only · mandatory The programmed RF TX frequency in KHz. | |||||||||||||||||
| ShzIduRadio1ProgrammedFrequencyRxRf | 1.3.6.1.4.1.7262.2.3.5.5.1.5.3 | INTEGER | RO | mandatory | |||||||||||||
scalar · INTEGER · read-only · mandatory The RF RX frequency in KHz. | |||||||||||||||||
| NhzIduWirelessInterfaceRadio2Frequencies | 1.3.6.1.4.1.7262.2.3.5.5.2 | ||||||||||||||||
| ShzIduRadio2Band | 1.3.6.1.4.1.7262.2.3.5.5.2.1 | INTEGER | RW | mandatory | |||||||||||||
scalar · INTEGER · read-write · mandatory The radio frequency standard used by Radio 2 (if present). Frequency bands are divided into sub bands. i.e. FCC 23 Ghz Band is comprised of fcc23a, fcc23b, fcc23c and fcc23d which make up the entire FCC23 band
| |||||||||||||||||
| ShzIduRadio2FreqGroupSelected | 1.3.6.1.4.1.7262.2.3.5.5.2.2 | INTEGER | RW | mandatory | |||||||||||||
scalar · INTEGER · read-write · mandatory The frequency group selected for Radio 2. The frequency subbands are divided into frequency groups txHigh and txLow. An horizon system must have one node configured to txLow and the other node configure to txHigh
| |||||||||||||||||
| ThzIduRadio2TxHighFreqTable | 1.3.6.1.4.1.7262.2.3.5.5.2.3 | NA | mandatory | ||||||||||||||
table · not-accessible · mandatory A table of txHigh frequency settings for Radio 2 | |||||||||||||||||
| RhzIduRadio2TxHighFreqEntry | 1.3.6.1.4.1.7262.2.3.5.5.2.3.1 | NA | mandatory | ||||||||||||||
row · not-accessible · mandatory A txHighFrequency entry containing all the frequency values | |||||||||||||||||
| ChzIduRadio2TxHighFreqIndex | 1.3.6.1.4.1.7262.2.3.5.5.2.3.1.1 | INTEGER | RO | mandatory | |||||||||||||
column · INTEGER · read-only · mandatory A unique value for each frequency channel. | |||||||||||||||||
| ChzIduRadio2TxHighFreqChannelIndex | 1.3.6.1.4.1.7262.2.3.5.5.2.3.1.2 | DisplayString | RO | mandatory | |||||||||||||
column · DisplayString · read-only · mandatory The channel index for the frequency. | |||||||||||||||||
| ChzIduRadio2TxHighFreqTransmitRfFrequency | 1.3.6.1.4.1.7262.2.3.5.5.2.3.1.3 | INTEGER | RO | mandatory | |||||||||||||
column · INTEGER · read-only · mandatory The RF TX frequency in KHz. | |||||||||||||||||
| ChzIduRadio2TxHighFreqReceiveRfFrequency | 1.3.6.1.4.1.7262.2.3.5.5.2.3.1.4 | INTEGER | RO | mandatory | |||||||||||||
column · INTEGER · read-only · mandatory The RF RX frequency in KHz. | |||||||||||||||||
| ChzIduRadio2TxHighFreqProgrammed | 1.3.6.1.4.1.7262.2.3.5.5.2.3.1.5 | INTEGER | RW | mandatory | |||||||||||||
column · INTEGER · read-write · mandatory Specifies the operating frequency channel for the modem. ***Only 1 index may be selected in a 1 modem system.
| |||||||||||||||||
| ThzIduRadio2TxLowFreqTable | 1.3.6.1.4.1.7262.2.3.5.5.2.4 | NA | mandatory | ||||||||||||||
table · not-accessible · mandatory A table of txLow frequency settings for Radio 2 | |||||||||||||||||
| RhzIduRadio2TxLowFreqEntry | 1.3.6.1.4.1.7262.2.3.5.5.2.4.1 | NA | mandatory | ||||||||||||||
row · not-accessible · mandatory A hzIduTxLowFrequeny entry containing the frequency values for a specific index | |||||||||||||||||
| ChzIduRadio2TxLowFreqIndex | 1.3.6.1.4.1.7262.2.3.5.5.2.4.1.1 | INTEGER | RO | mandatory | |||||||||||||
column · INTEGER · read-only · mandatory A unique value for each frequency channel. | |||||||||||||||||
| ChzIduRadio2TxLowFreqChannelIndex | 1.3.6.1.4.1.7262.2.3.5.5.2.4.1.2 | DisplayString | RO | mandatory | |||||||||||||
column · DisplayString · read-only · mandatory The channel index for the frequency. | |||||||||||||||||
| ChzIduRadio2TxLowFreqTransmitRfFrequency | 1.3.6.1.4.1.7262.2.3.5.5.2.4.1.3 | INTEGER | RO | mandatory | |||||||||||||
column · INTEGER · read-only · mandatory The RF TX frequency in KHz. | |||||||||||||||||
| ChzIduRadio2TxLowFreqReceiveRfFrequency | 1.3.6.1.4.1.7262.2.3.5.5.2.4.1.4 | INTEGER | RO | mandatory | |||||||||||||
column · INTEGER · read-only · mandatory The RF RX frequency in KHz. | |||||||||||||||||
| ChzIduRadio2TxLowFreqProgrammed | 1.3.6.1.4.1.7262.2.3.5.5.2.4.1.5 | INTEGER | RW | mandatory | |||||||||||||
column · INTEGER · read-write · mandatory Specifies the operating frequency channel for the modem. ***Only 1 index may be selected in a 1 modem system.
| |||||||||||||||||
| NhzIduRadio2ProgrammedFrequency | 1.3.6.1.4.1.7262.2.3.5.5.2.5 | ||||||||||||||||
| ShzIduRadio2ProgrammedFrequencyChannel | 1.3.6.1.4.1.7262.2.3.5.5.2.5.1 | DisplayString | RO | mandatory | |||||||||||||
scalar · DisplayString · read-only · mandatory The channel that has been programmed for Radio 2. | |||||||||||||||||
| ShzIduRadio2ProgrammedFrequencyTxRf | 1.3.6.1.4.1.7262.2.3.5.5.2.5.2 | INTEGER | RO | mandatory | |||||||||||||
scalar · INTEGER · read-only · mandatory The programmed RF TX frequency in KHz. | |||||||||||||||||
| ShzIduRadio2ProgrammedFrequencyRxRf | 1.3.6.1.4.1.7262.2.3.5.5.2.5.3 | INTEGER | RO | mandatory | |||||||||||||
scalar · INTEGER · read-only · mandatory The RF RX frequency in KHz. | |||||||||||||||||
| NhzIduWirelessInterfaceAntenna | 1.3.6.1.4.1.7262.2.3.5.6 | ||||||||||||||||
| ShzIduAntennaDiameter | 1.3.6.1.4.1.7262.2.3.5.6.1 | INTEGER | RO | mandatory | |||||||||||||
scalar · INTEGER · read-only · mandatory This defines the diameter of the antenna represented in inches.
| |||||||||||||||||
| NhzIduWirelessInterfaceRedundancy | 1.3.6.1.4.1.7262.2.3.5.7 | ||||||||||||||||
| ShzIduWirelessInterfaceRedundancyActiveWirelessPort | 1.3.6.1.4.1.7262.2.3.5.7.1 | INTEGER | RO | mandatory | |||||||||||||
scalar · INTEGER · read-only · mandatory This attribute indicates the active wireless port and is only applicable when the system capacity has been configured to singleCarrier-redundancy.
| |||||||||||||||||
| ShzIduWirelessInterfaceRedundancyPrimaryWirelessPort | 1.3.6.1.4.1.7262.2.3.5.7.2 | INTEGER | RW | mandatory | |||||||||||||
scalar · INTEGER · read-write · mandatory This attribute indicates the primary wireless port and is only applicable when the system capacity has been configured to singleCarrier-redundancy. The primary wireless port indicates which wireless port is connected to the 'primary' port on the RDRM coupler.
| |||||||||||||||||
| ShzIduWirelessInterfaceRedundancySwitchingAlgorithm | 1.3.6.1.4.1.7262.2.3.5.7.3 | INTEGER | RW | mandatory | |||||||||||||
scalar · INTEGER · read-write · mandatory This attribute selects the rule that will determine when a redundant path switch will take place. There are two options: manual and algorithm-based. The 'Manual' option turns off the automatic path switching feature. Only an operator can switch the active path.
| |||||||||||||||||
| ShzIduWirelessInterfaceRedundancySwitchCause | 1.3.6.1.4.1.7262.2.3.5.7.4 | DisplayString | RO | mandatory | |||||||||||||
scalar · DisplayString · read-only · mandatory This string indicates the reason that a redundancy switch has occurred. If the active port is the primary port then this string is empty. | |||||||||||||||||
| ShzIduWirelessInterfaceRedundancySwitchRadio | 1.3.6.1.4.1.7262.2.3.5.7.5 | INTEGER | WO | mandatory | |||||||||||||
scalar · INTEGER · write-only · mandatory This object switches the active path when switch (1) is written to this variable.
| |||||||||||||||||
| ShzIduWirelessInterfaceRedundancyRemoveFaultyWirelessPort | 1.3.6.1.4.1.7262.2.3.5.7.6 | INTEGER | WO | mandatory | |||||||||||||
scalar · INTEGER · write-only · mandatory This object removes the specified port from the faulty port list.
| |||||||||||||||||
| NhzIduWirelessInterfaceRedundancyDiagnostics | 1.3.6.1.4.1.7262.2.3.5.7.7 | ||||||||||||||||
| ShzIduWirelessInterfaceRedundancyDiagnose | 1.3.6.1.4.1.7262.2.3.5.7.7.1 | INTEGER | WO | mandatory | |||||||||||||
scalar · INTEGER · write-only · mandatory This write-only object will diagnose problems with switching paths. Write diagnose (1) to this object and check results in hzIduWirelessInterfaceRedundancyDiagnosticResult object
| |||||||||||||||||
| ShzIduWirelessInterfaceRedundancyDiagnosticResult | 1.3.6.1.4.1.7262.2.3.5.7.7.2 | DisplayString | RO | mandatory | |||||||||||||
scalar · DisplayString · read-only · mandatory The result from Redundancy Diagnostic is read from this object. Note that the diagnostic result presented in this object is private to SNMP initiated diagnostics. If a diagnostic is initiated from the CLI or WEB, this result will remain unchanged. | |||||||||||||||||
| NhzIduCalendar | 1.3.6.1.4.1.7262.2.3.6 | ||||||||||||||||
| ShzIduDate | 1.3.6.1.4.1.7262.2.3.6.1 | DisplayString | RO | mandatory | |||||||||||||
scalar · DisplayString · read-only · mandatory A string in the format as follows: XX/YY/ZZ Where XX = day of month (range 01 to 31) YY = month of year(range 01 to 12) ZZ = year (range 01 - 99) | |||||||||||||||||
| ShzIduTime | 1.3.6.1.4.1.7262.2.3.6.2 | DisplayString | RO | mandatory | |||||||||||||
scalar · DisplayString · read-only · mandatory A string in the format as follows:
aa:bb:cc.ddd
Where aa = hour of day ( range 00 to 23 )
bb = minute of hour ( range 00 to 59 )
cc = second of minute( range 00 to 59 )
ddd = thousandths of second (range 000 to 999) | |||||||||||||||||
| NhzIduAlarms | 1.3.6.1.4.1.7262.2.3.7 | ||||||||||||||||
| ShzIduClearAlarmCounters | 1.3.6.1.4.1.7262.2.3.7.1 | INTEGER | WO | mandatory | |||||||||||||
scalar · INTEGER · write-only · mandatory Clears the alarm counters for the specified group
| |||||||||||||||||
| NhzIduSystemAlarms | 1.3.6.1.4.1.7262.2.3.7.2 | ||||||||||||||||
| ShzIduExplicitAuthenticationFailure | 1.3.6.1.4.1.7262.2.3.7.2.1 | INTEGER | RO | mandatory | |||||||||||||
scalar · INTEGER · read-only · mandatory Authentication of the peer horizon node has failed. The severity is critical, the probable cause is an incorrect authentication configuration on horizon faulty cable between the modem and radio, and recommended course of action is to check both ends of the link.
| |||||||||||||||||
| ShzIduExplicitAuthenticationFailureCounts | 1.3.6.1.4.1.7262.2.3.7.2.2 | Counter | RO | mandatory | |||||||||||||
scalar · Counter · read-only · mandatory Indicates the number of times explicit authentication has failed. | |||||||||||||||||
| ShzIduAamConfigMismatch | 1.3.6.1.4.1.7262.2.3.7.2.3 | INTEGER | RO | mandatory | |||||||||||||
scalar · INTEGER · read-only · mandatory In the near end Automatic Adaptive Modulation(AAM) feature set to on and in peer it is set to off
| |||||||||||||||||
| ShzIduAamConfigMismatchCounts | 1.3.6.1.4.1.7262.2.3.7.2.4 | Counter | RO | mandatory | |||||||||||||
scalar · Counter · read-only · mandatory Indicates the approximate number of seconds AAMConfigMismatch alarm has been active. | |||||||||||||||||
| ShzIduAamActive | 1.3.6.1.4.1.7262.2.3.7.2.5 | INTEGER | RO | mandatory | |||||||||||||
scalar · INTEGER · read-only · mandatory Indicates aam is active and system running on lowest modulation
| |||||||||||||||||
| ShzIduAamActiveCounts | 1.3.6.1.4.1.7262.2.3.7.2.6 | Counter | RO | mandatory | |||||||||||||
scalar · Counter · read-only · mandatory Indicates the approximate number of seconds AAMActive alarm has been active. | |||||||||||||||||
| ShzIduSntpServerUnavailableAlarm | 1.3.6.1.4.1.7262.2.3.7.2.7 | INTEGER | RO | mandatory | |||||||||||||
scalar · INTEGER · read-only · mandatory All of the SNTP servers are not available.
| |||||||||||||||||
| ShzIduSntpServerUnavailableAlarmCounts | 1.3.6.1.4.1.7262.2.3.7.2.8 | Counter | RO | mandatory | |||||||||||||
scalar · Counter · read-only · mandatory Indicates how long in seconds all of the SNTP servers are not available. | |||||||||||||||||
| ShzIduFrequencyFileInvalid | 1.3.6.1.4.1.7262.2.3.7.2.9 | INTEGER | RO | mandatory | |||||||||||||
scalar · INTEGER · read-only · mandatory Executing frequency file is invalid.
| |||||||||||||||||
| ShzIduFrequencyFileInvalidCounts | 1.3.6.1.4.1.7262.2.3.7.2.10 | Counter | RO | mandatory | |||||||||||||
scalar · Counter · read-only · mandatory Indicates the time (in secs) since this alarm exist. | |||||||||||||||||
| ShzIduFan1Failure | 1.3.6.1.4.1.7262.2.3.7.2.11 | INTEGER | RO | mandatory | |||||||||||||
scalar · INTEGER · read-only · mandatory Indicates that Fan 1 has failed.
| |||||||||||||||||
| ShzIduFan1FailureCounts | 1.3.6.1.4.1.7262.2.3.7.2.12 | Counter | RO | mandatory | |||||||||||||
scalar · Counter · read-only · mandatory Indicates the number of seconds that the fan has failed for. | |||||||||||||||||
| ShzIduFan2Failure | 1.3.6.1.4.1.7262.2.3.7.2.13 | INTEGER | RO | mandatory | |||||||||||||
scalar · INTEGER · read-only · mandatory Indicates that Fan 2 has failed.
| |||||||||||||||||
| ShzIduFan2FailureCounts | 1.3.6.1.4.1.7262.2.3.7.2.14 | Counter | RO | mandatory | |||||||||||||
scalar · Counter · read-only · mandatory Indicates the number of seconds that the fan has failed for. | |||||||||||||||||
| ShzIduFan3Failure | 1.3.6.1.4.1.7262.2.3.7.2.15 | INTEGER | RO | mandatory | |||||||||||||
scalar · INTEGER · read-only · mandatory Indicates that Fan 3 has failed.
| |||||||||||||||||
| ShzIduFan3FailureCounts | 1.3.6.1.4.1.7262.2.3.7.2.16 | Counter | RO | mandatory | |||||||||||||
scalar · Counter · read-only · mandatory Indicates the number of seconds that the fan has failed for. | |||||||||||||||||
| ShzIduFan4Failure | 1.3.6.1.4.1.7262.2.3.7.2.17 | INTEGER | RO | mandatory | |||||||||||||
scalar · INTEGER · read-only · mandatory Indicates that Fan 4 has failed.
| |||||||||||||||||
| ShzIduFan4FailureCounts | 1.3.6.1.4.1.7262.2.3.7.2.18 | Counter | RO | mandatory | |||||||||||||
scalar · Counter · read-only · mandatory Indicates the number of seconds that the fan has failed for. | |||||||||||||||||
| ShzIduPrimaryPortNotSet | 1.3.6.1.4.1.7262.2.3.7.2.19 | INTEGER | RO | mandatory | |||||||||||||
scalar · INTEGER · read-only · mandatory The primary port used for redundancy has not been set.
| |||||||||||||||||
| ShzIduPrimaryPortNotSetCounts | 1.3.6.1.4.1.7262.2.3.7.2.20 | Counter | RO | mandatory | |||||||||||||
scalar · Counter · read-only · mandatory Indicates the approximate number of seconds that this alarm has been active. | |||||||||||||||||
| ShzIduSecondaryPortActive | 1.3.6.1.4.1.7262.2.3.7.2.21 | INTEGER | RO | mandatory | |||||||||||||
scalar · INTEGER · read-only · mandatory The active wireless port has switched to the secondary wireless port.
| |||||||||||||||||
| ShzIduSecondaryPortActiveCounts | 1.3.6.1.4.1.7262.2.3.7.2.22 | Counter | RO | mandatory | |||||||||||||
scalar · Counter · read-only · mandatory Indicates the approximate number of seconds that this alarm has been active. | |||||||||||||||||
| ShzIduPrimaryPortFaulty | 1.3.6.1.4.1.7262.2.3.7.2.23 | INTEGER | RO | mandatory | |||||||||||||
scalar · INTEGER · read-only · mandatory The primary wireless port is faulty.
| |||||||||||||||||
| ShzIduPrimaryPortFaultyCounts | 1.3.6.1.4.1.7262.2.3.7.2.24 | Counter | RO | mandatory | |||||||||||||
scalar · Counter · read-only · mandatory Indicates the approximate number of seconds that this alarm has been active. | |||||||||||||||||
| ShzIduSecondaryPortFaulty | 1.3.6.1.4.1.7262.2.3.7.2.25 | INTEGER | RO | mandatory | |||||||||||||
scalar · INTEGER · read-only · mandatory The secondary wireless port is faulty.
| |||||||||||||||||
| ShzIduSecondaryPortFaultyCounts | 1.3.6.1.4.1.7262.2.3.7.2.26 | Counter | RO | mandatory | |||||||||||||
scalar · Counter · read-only · mandatory Indicates the approximate number of seconds that this alarm has been active. | |||||||||||||||||
| NhzIduNetworkInterfaceAlarms | 1.3.6.1.4.1.7262.2.3.7.3 | ||||||||||||||||
| NhzIduEnetPort1Alarms | 1.3.6.1.4.1.7262.2.3.7.3.1 | ||||||||||||||||
| ShzIduEnetPort1DroppedEnetFramesThresholdExceeded | 1.3.6.1.4.1.7262.2.3.7.3.1.1 | INTEGER | RO | mandatory | |||||||||||||
scalar · INTEGER · read-only · mandatory The threshold for number of frames dropped has been exceeded. The threshold and the number of seconds that it must exceed this threshold are programmed by the user.
| |||||||||||||||||
| ShzIduEnetPort1DroppedEnetFramesThresholdCounts | 1.3.6.1.4.1.7262.2.3.7.3.1.2 | Counter | RO | mandatory | |||||||||||||
scalar · Counter · read-only · mandatory Indicates the approximate time, in seconds, that this alarm has been in the active state | |||||||||||||||||
| ShzIduEnetPort1BandwidthUtilizationThresholdExceeded | 1.3.6.1.4.1.7262.2.3.7.3.1.3 | INTEGER | RO | mandatory | |||||||||||||
scalar · INTEGER · read-only · mandatory The threshold for the percentage of available bandwidth has been exceeded. The threshold and the number of seconds that it must exceed this threshold are programmed by the user.
| |||||||||||||||||
| ShzIduEnetPort1BandwidthUtilizationThresholdCounts | 1.3.6.1.4.1.7262.2.3.7.3.1.4 | Counter | RO | mandatory | |||||||||||||
scalar · Counter · read-only · mandatory Indicates the approximate time, in seconds, that this alarm has been in the active state | |||||||||||||||||
| ShzIduEnetPort1RlsMismatch | 1.3.6.1.4.1.7262.2.3.7.3.1.5 | INTEGER | RO | mandatory | |||||||||||||
scalar · INTEGER · read-only · mandatory RLS configurations on the pair of systems are mismatched.
| |||||||||||||||||
| ShzIduEnetPort1RlsMismatchCounts | 1.3.6.1.4.1.7262.2.3.7.3.1.6 | Counter | RO | mandatory | |||||||||||||
scalar · Counter · read-only · mandatory Indicates the approximate time, in seconds, that this alarm has been in the active state | |||||||||||||||||
| ShzIduRLSQueueBasedShutdownActivated | 1.3.6.1.4.1.7262.2.3.7.3.1.7 | INTEGER | RO | mandatory | |||||||||||||
scalar · INTEGER · read-only · mandatory RLS Queue-Based shutdown is activated.
| |||||||||||||||||
| ShzIduRLSQueueBasedShutdownActivatedCounts | 1.3.6.1.4.1.7262.2.3.7.3.1.8 | Counter | RO | mandatory | |||||||||||||
scalar · Counter · read-only · mandatory Indicates the approximate time, in seconds, that this alarm has been in the active state | |||||||||||||||||
| ShzIduEnetPort1EthernetLinkDown | 1.3.6.1.4.1.7262.2.3.7.3.1.9 | INTEGER | RO | mandatory | off(1) | ||||||||||||
scalar · INTEGER · read-only · mandatory Indicates whether the Ethernet link is down or not. The severity is major, the probable cause is an incorrect configuration of the switch or router connected to horizon. The recommended course of action is to check the connection.
Example values from LibreNMS test devices
| |||||||||||||||||
| ShzIduEnetPort1EthernetLinkDownActivatedCounts | 1.3.6.1.4.1.7262.2.3.7.3.1.10 | Counter | RO | mandatory | 13 | ||||||||||||
scalar · Counter · read-only · mandatory Indicates the approximate time, in seconds, that this alarm has been in the active state Example values from LibreNMS test devices
| |||||||||||||||||
| NhzIduEnetPort2Alarms | 1.3.6.1.4.1.7262.2.3.7.3.2 | ||||||||||||||||
| ShzIduEnetPort2EthernetLinkDown | 1.3.6.1.4.1.7262.2.3.7.3.2.1 | INTEGER | RO | mandatory | off(1) | ||||||||||||
scalar · INTEGER · read-only · mandatory Indicates whether the Ethernet link is down or not. The severity is major, the probable cause is an incorrect configuration of the switch or router connected to horizon. The recommended course of action is to check the connection.
Example values from LibreNMS test devices
| |||||||||||||||||
| ShzIduEnetPort2EthernetLinkDownActivatedCounts | 1.3.6.1.4.1.7262.2.3.7.3.2.2 | Counter | RO | mandatory | 0 | ||||||||||||
scalar · Counter · read-only · mandatory Indicates the approximate time, in seconds, that this alarm has been in the active state Example values from LibreNMS test devices
| |||||||||||||||||
| NhzIduWirelessInterfaceAlarms | 1.3.6.1.4.1.7262.2.3.7.4 | ||||||||||||||||
| NhzIduModemAlarms | 1.3.6.1.4.1.7262.2.3.7.4.1 | ||||||||||||||||
| ThzIduModemAlarmsTable | 1.3.6.1.4.1.7262.2.3.7.4.1.1 | NA | mandatory | ||||||||||||||
table · not-accessible · mandatory A table of Modem Alarms. | |||||||||||||||||
| RhzIduModemAlarmsEntry | 1.3.6.1.4.1.7262.2.3.7.4.1.1.1 | NA | mandatory | ||||||||||||||
| ChzIduModemAlarmsIndex | 1.3.6.1.4.1.7262.2.3.7.4.1.1.1.1 | INTEGER | RO | mandatory | |||||||||||||
column · INTEGER · read-only · mandatory A unique value for each interface.
| |||||||||||||||||
| ChzIduModemRxLossOfSignal | 1.3.6.1.4.1.7262.2.3.7.4.1.1.1.2 | INTEGER | RO | mandatory | off(1) | ||||||||||||
column · INTEGER · read-only · mandatory Loss of signal lock from the demodulator. The severity is critical, the probable cause is lost synchronization with the far end, and recommended course of action is to check the operational state of both ends of the link.
Example values from LibreNMS test devices
| |||||||||||||||||
| ChzIduModemRxLossOfSignalCounts | 1.3.6.1.4.1.7262.2.3.7.4.1.1.1.3 | Counter | RO | mandatory | 42 | ||||||||||||
column · Counter · read-only · mandatory Indicates the approximate number of seconds that this alarm has been active. Example values from LibreNMS test devices
| |||||||||||||||||
| ChzIduModemTxLossOfSync | 1.3.6.1.4.1.7262.2.3.7.4.1.1.1.4 | INTEGER | RO | mandatory | |||||||||||||
column · INTEGER · read-only · mandatory Loss of sync bytes at the input of the modulator. The severity is critical, the probable cause is physical interference in the air link, and recommended course of action is to check the line of site between the horizon nodes.
| |||||||||||||||||
| ChzIduModemTxLossOfSyncCounts | 1.3.6.1.4.1.7262.2.3.7.4.1.1.1.5 | Counter | RO | mandatory | |||||||||||||
column · Counter · read-only · mandatory Indicates the approximate number of seconds that this alarm has been active. | |||||||||||||||||
| ChzIduModemSnrBelowThreshold | 1.3.6.1.4.1.7262.2.3.7.4.1.1.1.6 | INTEGER | RO | mandatory | |||||||||||||
column · INTEGER · read-only · mandatory The demodulator SNR performance worse than programmed levels. The severity is major, the probable cause is physical interference in the air link path or misalignment of the radios or severe weather conditions, and recommended course of action is to check the line of site between the horizon nodes.
| |||||||||||||||||
| ChzIduModemSnrBelowThresholdCounts | 1.3.6.1.4.1.7262.2.3.7.4.1.1.1.7 | Counter | RO | mandatory | |||||||||||||
column · Counter · read-only · mandatory Indicates the approximate number of seconds that this alarm has been active. | |||||||||||||||||
| ChzIduModemEqualizerStressExceedThreshold | 1.3.6.1.4.1.7262.2.3.7.4.1.1.1.8 | INTEGER | RO | mandatory | |||||||||||||
column · INTEGER · read-only · mandatory Equalizer Stress measured within the demodulator exceeds the threshold value.
| |||||||||||||||||
| ChzIduModemEquilizerStressExceedThresholdCounts | 1.3.6.1.4.1.7262.2.3.7.4.1.1.1.9 | Counter | RO | mandatory | |||||||||||||
column · Counter · read-only · mandatory Indicates the approximate number of seconds that this alarm has been active. | |||||||||||||||||
| ChzIduModemHardwareFault | 1.3.6.1.4.1.7262.2.3.7.4.1.1.1.10 | INTEGER | RO | mandatory | |||||||||||||
column · INTEGER · read-only · mandatory
| |||||||||||||||||
| ChzIduModemHardwareFaultCounts | 1.3.6.1.4.1.7262.2.3.7.4.1.1.1.11 | Counter | RO | mandatory | |||||||||||||
column · Counter · read-only · mandatory Indicates the approximate number of seconds that this alarm has been active. | |||||||||||||||||
| ChzIduModemProgrammingError | 1.3.6.1.4.1.7262.2.3.7.4.1.1.1.12 | INTEGER | RO | mandatory | |||||||||||||
column · INTEGER · read-only · mandatory Encountered some problem while programming the modem.
| |||||||||||||||||
| ChzIduModemProgrammingErrorCounts | 1.3.6.1.4.1.7262.2.3.7.4.1.1.1.13 | Counter | RO | mandatory | |||||||||||||
column · Counter · read-only · mandatory Indicates the approximate number of seconds that this alarm has been active. | |||||||||||||||||
| ChzIduRLSShutdownActivated | 1.3.6.1.4.1.7262.2.3.7.4.1.1.1.14 | INTEGER | RO | mandatory | |||||||||||||
column · INTEGER · read-only · mandatory RLS shutdown is activated.
| |||||||||||||||||
| ChzIduRLSShutdownActivatedCounts | 1.3.6.1.4.1.7262.2.3.7.4.1.1.1.15 | Counter | RO | mandatory | |||||||||||||
column · Counter · read-only · mandatory Indicates the approximate time, in seconds, that this alarm has been in the active state | |||||||||||||||||
| NhzIduRadioAlarms | 1.3.6.1.4.1.7262.2.3.7.4.2 | ||||||||||||||||
| ThzIduRadioAlarmsTable | 1.3.6.1.4.1.7262.2.3.7.4.2.1 | NA | mandatory | ||||||||||||||
table · not-accessible · mandatory A table of Radio Alarms. | |||||||||||||||||
| RhzIduRadioAlarmsEntry | 1.3.6.1.4.1.7262.2.3.7.4.2.1.1 | NA | mandatory | ||||||||||||||
| ChzIduRadioAlarmsIndex | 1.3.6.1.4.1.7262.2.3.7.4.2.1.1.1 | INTEGER | RO | mandatory | |||||||||||||
column · INTEGER · read-only · mandatory A unique value for each radio interface.
| |||||||||||||||||
| ChzIduRadioPLDROLostLock | 1.3.6.1.4.1.7262.2.3.7.4.2.1.1.2 | INTEGER | RO | mandatory | |||||||||||||
column · INTEGER · read-only · mandatory The PLDRO/LO has lost lock on the radio. The severity is critical, the probable cause a faulty radio unit and recommended course of action is to replace the radio unit.
| |||||||||||||||||
| ChzIduRadioPLDROLostLockCounts | 1.3.6.1.4.1.7262.2.3.7.4.2.1.1.3 | Counter | RO | mandatory | |||||||||||||
column · Counter · read-only · mandatory Indicates the approximate number of seconds that this alarm has been active. | |||||||||||||||||
| ChzIduRadioLostCommunication | 1.3.6.1.4.1.7262.2.3.7.4.2.1.1.4 | INTEGER | RO | mandatory | |||||||||||||
column · INTEGER · read-only · mandatory RS232 communication lost between IDU and the radio. The severity is critical, the probable cause is a faulty cable between the modem and radio, and recommended course of action is to check the connection.
| |||||||||||||||||
| ChzIduRadioLostCommunicationCounts | 1.3.6.1.4.1.7262.2.3.7.4.2.1.1.5 | Counter | RO | mandatory | |||||||||||||
column · Counter · read-only · mandatory Indicates the approximate number of seconds that this alarm has been active. | |||||||||||||||||
| ChzIduRadioMismatch | 1.3.6.1.4.1.7262.2.3.7.4.2.1.1.6 | INTEGER | RO | mandatory | |||||||||||||
column · INTEGER · read-only · mandatory The radio connected to the IDU modem does not match the frequency programmed into the modem unit. The severity is major, the probable cause is an incorrectly programmed modem or an incorrect radio type connected to the modem, and recommended course of action is to check the modem frequency settings and radio hardware version number or serial number.
| |||||||||||||||||
| ChzIduRadioMismatchCounts | 1.3.6.1.4.1.7262.2.3.7.4.2.1.1.7 | Counter | RO | mandatory | |||||||||||||
column · Counter · read-only · mandatory Indicates the approximate number of seconds that this alarm has been active. | |||||||||||||||||
| ChzIduRadioPowerAmp | 1.3.6.1.4.1.7262.2.3.7.4.2.1.1.8 | INTEGER | RO | mandatory | |||||||||||||
column · INTEGER · read-only · mandatory The power amplifier on the radio is not operating within normal operating specifications. The severity is critical, the probable cause a faulty radio unit, and recommended course of action is to replace the radio unit.
| |||||||||||||||||
| ChzIduRadioPowerAmpCounts | 1.3.6.1.4.1.7262.2.3.7.4.2.1.1.9 | Counter | RO | mandatory | |||||||||||||
column · Counter · read-only · mandatory Indicates the approximate number of seconds that this alarm has been active. | |||||||||||||||||
| ChzIduRadioExcessiveTxCableLoss | 1.3.6.1.4.1.7262.2.3.7.4.2.1.1.10 | INTEGER | RO | mandatory | |||||||||||||
column · INTEGER · read-only · mandatory
| |||||||||||||||||
| ChzIduRadioExcessiveTxCableLossCounts | 1.3.6.1.4.1.7262.2.3.7.4.2.1.1.11 | Counter | RO | mandatory | |||||||||||||
column · Counter · read-only · mandatory Indicates the approximate number of seconds that this alarm has been active. | |||||||||||||||||
| ChzIduRadioRslBelowThreshold | 1.3.6.1.4.1.7262.2.3.7.4.2.1.1.12 | INTEGER | RO | mandatory | |||||||||||||
column · INTEGER · read-only · mandatory The minimum radio receive signal level threshold has been crossed. The severity is major, the probable cause is physical interference in the air link path or misalignment of the radios or severe weather conditions, and recommended course of action is to check the line of site between the air pair nodes.
| |||||||||||||||||
| ChzIduRadioRslBelowThresholdCounts | 1.3.6.1.4.1.7262.2.3.7.4.2.1.1.13 | Counter | RO | mandatory | |||||||||||||
column · Counter · read-only · mandatory Indicates the approximate number of seconds that this alarm has been active. | |||||||||||||||||
| ChzIduRadioHighPowerOptionM1 | 1.3.6.1.4.1.7262.2.3.7.4.2.1.1.14 | INTEGER | RO | mandatory | |||||||||||||
column · INTEGER · read-only · mandatory This applies to High Power Radios only. Indicates Power Amp Alarm (M1).
| |||||||||||||||||
| ChzIduRadioHighPowerOptionM1Counts | 1.3.6.1.4.1.7262.2.3.7.4.2.1.1.15 | Counter | RO | mandatory | |||||||||||||
column · Counter · read-only · mandatory Indicates the approximate number of seconds that this alarm has been active. | |||||||||||||||||
| ChzIduRadioHighPowerOptionM2 | 1.3.6.1.4.1.7262.2.3.7.4.2.1.1.16 | INTEGER | RO | mandatory | |||||||||||||
column · INTEGER · read-only · mandatory This applies to High Power Radios only. Indicates Power Amp Alarm (M2).
| |||||||||||||||||
| ChzIduRadioHighPowerOptionM2Counts | 1.3.6.1.4.1.7262.2.3.7.4.2.1.1.17 | Counter | RO | mandatory | |||||||||||||
column · Counter · read-only · mandatory Indicates the approximate number of seconds that this alarm has been active. | |||||||||||||||||
| ChzIduRadioHighPowerTxDetector | 1.3.6.1.4.1.7262.2.3.7.4.2.1.1.18 | INTEGER | RO | mandatory | |||||||||||||
column · INTEGER · read-only · mandatory This applies to High Power Radios only. Indicates minimum power threshold has not been surpassed.
| |||||||||||||||||
| ChzIduRadioHighPowerTxDetectorCounts | 1.3.6.1.4.1.7262.2.3.7.4.2.1.1.19 | Counter | RO | mandatory | |||||||||||||
column · Counter · read-only · mandatory Indicates the approximate number of seconds that this alarm has been active. | |||||||||||||||||
| ChzIduRadioAtpcConfigMismatch | 1.3.6.1.4.1.7262.2.3.7.4.2.1.1.20 | INTEGER | RO | mandatory | |||||||||||||
column · INTEGER · read-only · mandatory The pair of the systems don't have same ATPC configurations. On one side ATPC is enabled, but on the other side ATPC is not enabled.
| |||||||||||||||||
| ChzIduRadioAtpcConfigMismatchCounts | 1.3.6.1.4.1.7262.2.3.7.4.2.1.1.21 | Counter | RO | mandatory | |||||||||||||
column · Counter · read-only · mandatory Indicates the approximate number of seconds that this alarm has been active. | |||||||||||||||||
| ChzIduRadioRedundancySerialNumMismatch | 1.3.6.1.4.1.7262.2.3.7.4.2.1.1.22 | INTEGER | RO | mandatory | |||||||||||||
column · INTEGER · read-only · mandatory The radio serial number programmed in flash and radio do not match.
| |||||||||||||||||
| ChzIduRadioRedundancySerialNumMismatchCounts | 1.3.6.1.4.1.7262.2.3.7.4.2.1.1.23 | Counter | RO | mandatory | |||||||||||||
column · Counter · read-only · mandatory Indicates the approximate number of seconds that this alarm has been active. | |||||||||||||||||
| ChzIduRadioExcessiveTxCableLossChange | 1.3.6.1.4.1.7262.2.3.7.4.2.1.1.24 | INTEGER | RO | mandatory | |||||||||||||
column · INTEGER · read-only · mandatory Cable loss change exceeds the threshold.
| |||||||||||||||||
| ChzIduRadioExcessiveTxCableLossChangeCounts | 1.3.6.1.4.1.7262.2.3.7.4.2.1.1.25 | Counter | RO | mandatory | |||||||||||||
column · Counter · read-only · mandatory Indicates the approximate number of seconds that this alarm has been active. | |||||||||||||||||
| ChzIduRadioExcessiveRxCableLoss | 1.3.6.1.4.1.7262.2.3.7.4.2.1.1.26 | INTEGER | RO | mandatory | |||||||||||||
column · INTEGER · read-only · mandatory Rx gain can not be adjusted to desired value.
| |||||||||||||||||
| ChzIduRadioExcessiveRxCableLossCounts | 1.3.6.1.4.1.7262.2.3.7.4.2.1.1.27 | Counter | RO | mandatory | |||||||||||||
column · Counter · read-only · mandatory Indicates the approximate number of seconds that this alarm has been active. | |||||||||||||||||
| ChzIduRadioAtpcTxAtMaxPower | 1.3.6.1.4.1.7262.2.3.7.4.2.1.1.28 | INTEGER | RO | mandatory | |||||||||||||
column · INTEGER · read-only · mandatory ATPC auto-disabled (transmitting at coordinated power).
| |||||||||||||||||
| ChzIduRadioAtpcTxAtMaxPowerCounts | 1.3.6.1.4.1.7262.2.3.7.4.2.1.1.29 | Counter | RO | mandatory | |||||||||||||
column · Counter · read-only · mandatory Indicates the approximate number of seconds that this alarm has been active. | |||||||||||||||||
| NhzIduTrapConfig | 1.3.6.1.4.1.7262.2.3.8 | ||||||||||||||||
| !hzIduExplicitAuthenticationFailureV1Trap | 1.3.6.1.4.1.7262.2.3.8.0.3 | ||||||||||||||||
notification Authentication of the peer horizon node has failed. The severity is critical, the probable cause is an incorrect authentication configuration on horizon faulty cable between the modem and radio, and recommended course of action is to check both ends of the link. | |||||||||||||||||
| !hzIduExplicitAuthenticationFailureClearedV1Trap | 1.3.6.1.4.1.7262.2.3.8.0.4 | ||||||||||||||||
notification The condition has cleared. The peer node is now authenticated. | |||||||||||||||||
| !hzIduAamConfigMisMatchV1Trap | 1.3.6.1.4.1.7262.2.3.8.0.5 | ||||||||||||||||
| !hzIduAamConfigMisMatchClearV1Trap | 1.3.6.1.4.1.7262.2.3.8.0.6 | ||||||||||||||||
| !hzIduAamActiveV1Trap | 1.3.6.1.4.1.7262.2.3.8.0.7 | ||||||||||||||||
notification Adaptive modulation on and system running on lowest modulation | |||||||||||||||||
| !hzIduAamActiveClearedV1Trap | 1.3.6.1.4.1.7262.2.3.8.0.8 | ||||||||||||||||
notification Adaptive modulation on system running on higher modulation | |||||||||||||||||
| !hzIduAtpcConfigMismatchV1Trap | 1.3.6.1.4.1.7262.2.3.8.0.9 | ||||||||||||||||
notification ATPC is set to on at near end however in the far end it is set to off. | |||||||||||||||||
| !hzIduAtpcConfigMismatchClearedV1Trap | 1.3.6.1.4.1.7262.2.3.8.0.10 | ||||||||||||||||
notification ATPC configuration mismatch is cleared | |||||||||||||||||
| !hzIduSntpServersUnreachableV1Trap | 1.3.6.1.4.1.7262.2.3.8.0.11 | ||||||||||||||||
notification Can't reach any of the sntp servers | |||||||||||||||||
| !hzIduSntpServersUnreachableClearedV1Trap | 1.3.6.1.4.1.7262.2.3.8.0.12 | ||||||||||||||||
notification At least one of SNTP servers is reachable | |||||||||||||||||
| !hzIduFrequencyFileInvalidV1Trap | 1.3.6.1.4.1.7262.2.3.8.0.13 | ||||||||||||||||
notification When the executing frequency file is invalid, this trap is generated. | |||||||||||||||||
| !hzIduEnetPort1DroppedFramesThresholdExceededV1Trap | 1.3.6.1.4.1.7262.2.3.8.0.14 | ||||||||||||||||
notification The ethernet dropped frames threshold has been detected above its threshold value. | |||||||||||||||||
| !hzIduEnetPort1DroppedFramesThresholdExceededClearedV1Trap | 1.3.6.1.4.1.7262.2.3.8.0.15 | ||||||||||||||||
notification The condition has cleared.The ethernet dropped frames threshold is now below its threshold value. | |||||||||||||||||
| !hzIduEnetPort1BwUtilizationThresholdExceededV1Trap | 1.3.6.1.4.1.7262.2.3.8.0.16 | ||||||||||||||||
notification The ethernet bandwidth threshold has been detected above its threshold value. | |||||||||||||||||
| !hzIduEnetPort1BwUtilizationThresholdExceededClearedV1Trap | 1.3.6.1.4.1.7262.2.3.8.0.17 | ||||||||||||||||
notification The condition has cleared. The ethernet bandwidth threshold is now below its threshold value. | |||||||||||||||||
| !hzIduEnetPort1RlsMismatchV1Trap | 1.3.6.1.4.1.7262.2.3.8.0.18 | ||||||||||||||||
notification RLS mismatch | |||||||||||||||||
| !hzIduEnetPort1RlsMismatchClearedV1Trap | 1.3.6.1.4.1.7262.2.3.8.0.19 | ||||||||||||||||
notification RLS mismatch cleared | |||||||||||||||||
| !hzIduRlsQueueBasedShutdownActivatedv1Trap | 1.3.6.1.4.1.7262.2.3.8.0.20 | ||||||||||||||||
notification RLS Queue-Based shutdown is activated | |||||||||||||||||
| !hzIduRlsQueueBasedShutdownActivatedClearedV1Trap | 1.3.6.1.4.1.7262.2.3.8.0.21 | ||||||||||||||||
notification RLS Queue-Based shutdown is not activated | |||||||||||||||||
| !hzIduModemRxLossOfSignalLockV1Trap | 1.3.6.1.4.1.7262.2.3.8.0.22 | ||||||||||||||||
notification Loss of signal lock from the demodulator. The severity is critical, the probable cause is lost synchronization with the far end, and recommended course of action is to check the operational state of both ends of the link.
| |||||||||||||||||
| !hzIduModemRxLossOfSignalLockClearedV1Trap | 1.3.6.1.4.1.7262.2.3.8.0.23 | ||||||||||||||||
| !hzIduModemTxLossOfSyncV1Trap | 1.3.6.1.4.1.7262.2.3.8.0.24 | ||||||||||||||||
notification Loss of sync bytes at the input of the modulator. The severity is critical, the probable cause is physical interference in the air link, and recommended course of action is to check the line of site between the horizon nodes.
| |||||||||||||||||
| !hzIduModemTxLossOfSyncClearedV1Trap | 1.3.6.1.4.1.7262.2.3.8.0.25 | ||||||||||||||||
| !hzIduModemSnrBelowThresholdV1Trap | 1.3.6.1.4.1.7262.2.3.8.0.26 | ||||||||||||||||
notification The demodulator SNR performance worse than programmed levels. The severity is major, the probable cause is physical interference in the air link path or misalignment of the radios or severe weather conditions, and recommended course of action is to check the line of site between the horizon nodes.
| |||||||||||||||||
| !hzIduModemSnrBelowThresholdClearedV1Trap | 1.3.6.1.4.1.7262.2.3.8.0.27 | ||||||||||||||||
| !hzIduModemEqualizerStressExceedThresholdV1Trap | 1.3.6.1.4.1.7262.2.3.8.0.28 | ||||||||||||||||
notification Equalizer Stress measured within the demodulator exceeds the threshold value.
| |||||||||||||||||
| !hzIduModemEqualizerStressExceedThresholdClearedV1Trap | 1.3.6.1.4.1.7262.2.3.8.0.29 | ||||||||||||||||
notification Equalizer Stress measured within the demodulator is within the threshold value.
| |||||||||||||||||
| !hzIduEnetPort1ChannelizedRslBelowThresholdV1Trap | 1.3.6.1.4.1.7262.2.3.8.0.30 | ||||||||||||||||
notification The RSL has been detected below its minimum threshold. | |||||||||||||||||
| !hzIduEnetPort1ChannelizedRslBelowThresholdClearedV1Trap | 1.3.6.1.4.1.7262.2.3.8.0.31 | ||||||||||||||||
notification The condition has cleared. RSL is now above its minimum threshold. | |||||||||||||||||
| !hzIduModemHardwareFaultV1Trap | 1.3.6.1.4.1.7262.2.3.8.0.32 | ||||||||||||||||
notification Power supply circuitry failed. Should be sent for diagnosis.
| |||||||||||||||||
| !hzIduModemHardwareFaultClearedV1Trap | 1.3.6.1.4.1.7262.2.3.8.0.33 | ||||||||||||||||
| !hzIduModemProgrammingErrorV1Trap | 1.3.6.1.4.1.7262.2.3.8.0.34 | ||||||||||||||||
| !hzIduModemProgrammingErrorClearedrV1Trap | 1.3.6.1.4.1.7262.2.3.8.0.35 | ||||||||||||||||
| !hzIduTtySessionCommencedV1Trap | 1.3.6.1.4.1.7262.2.3.8.0.36 | ||||||||||||||||
notification A person has successfully gained access to the ascii management port (telnet, local management port, or HTTP). The username is included in the Trap. | |||||||||||||||||
| !hzIduTtySessionTerminatedV1Trap | 1.3.6.1.4.1.7262.2.3.8.0.37 | ||||||||||||||||
notification A person has logged out of an ascii management port (telnet, local management port, or HTTP). The username is included in the Trap. | |||||||||||||||||
| !hzIduAtpcTxAtMaxPwrV1Trap | 1.3.6.1.4.1.7262.2.3.8.0.38 | ||||||||||||||||
| !hzIduAtpcTxAtMaxPwrClearedV1Trap | 1.3.6.1.4.1.7262.2.3.8.0.39 | ||||||||||||||||
| !hzIduRadioPLDROLostLockV1Trap | 1.3.6.1.4.1.7262.2.3.8.0.40 | ||||||||||||||||
notification The PLDRO/LO has lost lock on the radio. The severity is critical, the probable cause a faulty radio unit within AirPair, and recommended course of action is to replace the radio unit
| |||||||||||||||||
| !hzIduRadioPLDROLostLockClearedV1Trap | 1.3.6.1.4.1.7262.2.3.8.0.41 | ||||||||||||||||
| !hzIduRadioLostCommunicationV1Trap | 1.3.6.1.4.1.7262.2.3.8.0.42 | ||||||||||||||||
notification RS232 communication lost between IDU and the radio. The severity is critical, the probable cause is a faulty cable between the modem and radio, and recommended course of action is to check the connection.
| |||||||||||||||||
| !hzIduRadioLostCommunicationClearedV1Trap | 1.3.6.1.4.1.7262.2.3.8.0.43 | ||||||||||||||||
notification RS232 communication has been re-establisted between IDU and the radio.
| |||||||||||||||||
| !hzIduRadioMismatchV1Trap | 1.3.6.1.4.1.7262.2.3.8.0.44 | ||||||||||||||||
notification The radio connected to the IDU modem does not match the frequency programmed into the modem unit. The severity is major, the probable cause is an incorrectly programmed modem or an incorrect radio type connected to the modem, and recommended course of action is to check the modem frequency settings and radio hardware version number or serial number.
| |||||||||||||||||
| !hzIduRadioMismatchClearedV1Trap | 1.3.6.1.4.1.7262.2.3.8.0.45 | ||||||||||||||||
notification The condition has cleared. The radio matches the programmed parameters in the modem.
| |||||||||||||||||
| !hzIduRadioPowerAmpV1Trap | 1.3.6.1.4.1.7262.2.3.8.0.46 | ||||||||||||||||
notification The power amplifier on the radio is not operating within normal operating specifications. The severity is critical, the probable cause a faulty radio unit, and recommended course of action is to replace the radio unit.
| |||||||||||||||||
| !hzIduRadioPowerAmpClearedV1Trap | 1.3.6.1.4.1.7262.2.3.8.0.47 | ||||||||||||||||
notification The power amplifier on the radio is now operating within normal specifications
| |||||||||||||||||
| !hzIduRadioExcessiveTxCableLossV1Trap | 1.3.6.1.4.1.7262.2.3.8.0.48 | ||||||||||||||||
notification The radio cannot compensate for the calculated amount of Tx Cable Loss.
| |||||||||||||||||
| !hzIduRadioExcessiveTxCableLossClearedV1Trap | 1.3.6.1.4.1.7262.2.3.8.0.49 | ||||||||||||||||
| !hzIduHiPowerRadioDrainM1V1Trap | 1.3.6.1.4.1.7262.2.3.8.0.50 | ||||||||||||||||
notification This applies to High Power Radios only. Indicates Power Amp Alarm (M1).
| |||||||||||||||||
| !hzIduHiPowerRadioDrainM1ClearedV1Trap | 1.3.6.1.4.1.7262.2.3.8.0.51 | ||||||||||||||||
notification This applies to High Power Radios only. Indicates Power Amp Alarm (M1) cleared.
| |||||||||||||||||
| !hzIduHiPowerRadioDrainM2V1Trap | 1.3.6.1.4.1.7262.2.3.8.0.52 | ||||||||||||||||
notification This applies to High Power Radios only. Indicates Power Amp Alarm (M2).
| |||||||||||||||||
| !hzIduHiPowerRadioDrainM2ClearedV1Trap | 1.3.6.1.4.1.7262.2.3.8.0.53 | ||||||||||||||||
notification This applies to High Power Radios only. Indicates Power Amp Alarm (M2) cleared.
| |||||||||||||||||
| !hzIduHiPowerRadioTxDetectorV1Trap | 1.3.6.1.4.1.7262.2.3.8.0.54 | ||||||||||||||||
notification This applies to High Power Radios only. Indicates minimum power threshold has not been surpassed.
| |||||||||||||||||
| !hzIduHiPowerRadioTxDetectorClearedV1Trap | 1.3.6.1.4.1.7262.2.3.8.0.55 | ||||||||||||||||
notification This applies to High Power Radios only. Indicates minimum power threshold alarm has cleared.
| |||||||||||||||||
| !hzIduSecondaryRadioIsActiveV1Trap | 1.3.6.1.4.1.7262.2.3.8.0.56 | ||||||||||||||||
| !hzIduSecondaryRadioIsActiveClearedV1Trap | 1.3.6.1.4.1.7262.2.3.8.0.57 | ||||||||||||||||
| !hzIduRedundancySerialNumberMisMatchV1Trap | 1.3.6.1.4.1.7262.2.3.8.0.58 | ||||||||||||||||
notification The radio serial number programmed in flash and radio do not match.
| |||||||||||||||||
| !hzIduRedundancySerialNumberMisMatchClearedV1Trap | 1.3.6.1.4.1.7262.2.3.8.0.59 | ||||||||||||||||
| !hzIduRadioFirmwareMismatchV1Trap | 1.3.6.1.4.1.7262.2.3.8.0.60 | ||||||||||||||||
notification The radio connected to the IDU modem does not match the radio band or frequency bank specified by the user. As a result, the system will not work.
| |||||||||||||||||
| !hzIduRadioFirmwareMismatchClearedV1Trap | 1.3.6.1.4.1.7262.2.3.8.0.61 | ||||||||||||||||
| !hzIduSecondaryRadioNotdetectedV1Trap | 1.3.6.1.4.1.7262.2.3.8.0.62 | ||||||||||||||||
| !hzIduSecondaryRadioNotdetectedClearedV1Trap | 1.3.6.1.4.1.7262.2.3.8.0.63 | ||||||||||||||||
| !hzIduPrimaryRadioNotdetectedV1Trap | 1.3.6.1.4.1.7262.2.3.8.0.64 | ||||||||||||||||
| !hzIduPrimaryRadioNotdetectedClearedV1Trap | 1.3.6.1.4.1.7262.2.3.8.0.65 | ||||||||||||||||
| !hzIduFaultyPrimaryRadioV1Trap | 1.3.6.1.4.1.7262.2.3.8.0.66 | ||||||||||||||||
| !hzIduFaultyPrimaryRadioClearedV1Trap | 1.3.6.1.4.1.7262.2.3.8.0.67 | ||||||||||||||||
| !hzIduRadioExcessiveTxCableLossChangeV1Trap | 1.3.6.1.4.1.7262.2.3.8.0.68 | ||||||||||||||||
| !hzIduRadioExcessiveTxCableLossChangeClearedV1Trap | 1.3.6.1.4.1.7262.2.3.8.0.69 | ||||||||||||||||
| !hzIduExcessiveRxCableLossV1Trap | 1.3.6.1.4.1.7262.2.3.8.0.70 | ||||||||||||||||
| !hzIduExcessiveRxCableLossClearedV1Trap | 1.3.6.1.4.1.7262.2.3.8.0.71 | ||||||||||||||||
| !hzIduRedundancyPrimaryPortNotSetV1Trap | 1.3.6.1.4.1.7262.2.3.8.0.72 | ||||||||||||||||
notification Redundancy: Primary Port not set. | |||||||||||||||||
| !hzIduRedundancyPrimaryPortNotSetClearedV1Trap | 1.3.6.1.4.1.7262.2.3.8.0.73 | ||||||||||||||||
notification Redundancy: Primary Port not set - cleared. | |||||||||||||||||
| !hzIduRedundancySecondaryPortIsActiveV1Trap | 1.3.6.1.4.1.7262.2.3.8.0.74 | ||||||||||||||||
notification Redundancy: Secondary Port is Active. | |||||||||||||||||
| !hzIduRedundancySecondaryPortIsActiveClearedV1Trap | 1.3.6.1.4.1.7262.2.3.8.0.75 | ||||||||||||||||
notification Redundancy: Secondary Port is no longer Active | |||||||||||||||||
| !hzIduRedundancyPrimaryPortFaultyV1Trap | 1.3.6.1.4.1.7262.2.3.8.0.76 | ||||||||||||||||
notification Redundancy: Primary Port is Faulty. | |||||||||||||||||
| !hzIduRedundancyPrimaryPortFaultyClearedV1Trap | 1.3.6.1.4.1.7262.2.3.8.0.77 | ||||||||||||||||
notification Redundancy: Primary Port is no longer Faulty. | |||||||||||||||||
| !hzIduRedundancySecondaryPortFaultyV1Trap | 1.3.6.1.4.1.7262.2.3.8.0.78 | ||||||||||||||||
notification Redundancy: Secondary Port is Faulty. | |||||||||||||||||
| !hzIduRedundancySecondaryPortFaultyClearedV1Trap | 1.3.6.1.4.1.7262.2.3.8.0.79 | ||||||||||||||||
notification Redundancy: secondary Port is no longer Faulty. | |||||||||||||||||
| !hzIduFan1FailedV1Trap | 1.3.6.1.4.1.7262.2.3.8.0.80 | ||||||||||||||||
notification Fan 1 has failed | |||||||||||||||||
| !hzIduFan1FailureClearedV1Trap | 1.3.6.1.4.1.7262.2.3.8.0.81 | ||||||||||||||||
notification The Fan 1 Failure has Cleared | |||||||||||||||||
| !hzIduFan2FailedV1Trap | 1.3.6.1.4.1.7262.2.3.8.0.82 | ||||||||||||||||
notification Fan 2 has failed | |||||||||||||||||
| !hzIduFan2FailureClearedV1Trap | 1.3.6.1.4.1.7262.2.3.8.0.83 | ||||||||||||||||
notification The Fan 2 Failure has Cleared | |||||||||||||||||
| !hzIduFan3FailedV1Trap | 1.3.6.1.4.1.7262.2.3.8.0.84 | ||||||||||||||||
notification Fan 3 has failed | |||||||||||||||||
| !hzIduFan3FailureClearedV1Trap | 1.3.6.1.4.1.7262.2.3.8.0.85 | ||||||||||||||||
notification The Fan 3 Failure has Cleared | |||||||||||||||||
| !hzIduFan4FailedV1Trap | 1.3.6.1.4.1.7262.2.3.8.0.86 | ||||||||||||||||
notification Fan 4 has failed | |||||||||||||||||
| !hzIduFan4FailureClearedV1Trap | 1.3.6.1.4.1.7262.2.3.8.0.87 | ||||||||||||||||
notification The Fan 4 Failure has Cleared | |||||||||||||||||
| !hzIduRlsShutdownActivatedv1Trap | 1.3.6.1.4.1.7262.2.3.8.0.88 | ||||||||||||||||
| !hzIduRlsShutdownActivatedClearedV1Trap | 1.3.6.1.4.1.7262.2.3.8.0.89 | ||||||||||||||||
| ThzIduSnmpTrapHostTable | 1.3.6.1.4.1.7262.2.3.8.1 | NA | mandatory | ||||||||||||||
table · not-accessible · mandatory Table containing SNMP trap host entries. | |||||||||||||||||
| RhzIduSnmpTrapHostEntry | 1.3.6.1.4.1.7262.2.3.8.1.1 | NA | mandatory | ||||||||||||||
row · not-accessible · mandatory The snmp trap host entry containing all the trap host information | |||||||||||||||||
| ChzIduSnmpTrapHostIndex | 1.3.6.1.4.1.7262.2.3.8.1.1.1 | INTEGER | RO | mandatory | |||||||||||||
column · INTEGER · read-only · mandatory A unique value for each trap host. | |||||||||||||||||
| ChzIduSnmpTrapHostMode | 1.3.6.1.4.1.7262.2.3.8.1.1.2 | INTEGER | RO | mandatory | |||||||||||||
column · INTEGER · read-only · mandatory Indicates how the snmp trap host is obtained for the system.
| |||||||||||||||||
| ChzIduSnmpTrapHostIpAddress | 1.3.6.1.4.1.7262.2.3.8.1.1.3 | IpAddress | RO | mandatory | |||||||||||||
column · IpAddress · read-only · mandatory Indicates snmp trap host IP address. | |||||||||||||||||
| ChzIduSnmpTrapHostCommunityName | 1.3.6.1.4.1.7262.2.3.8.1.1.4 | DisplayString (SIZE (0..24)) | RO | mandatory | |||||||||||||
column · DisplayString (SIZE (0..24)) · read-only · mandatory The community string name used in Traps. | |||||||||||||||||
| ChzIduSnmpTrapHostActivated | 1.3.6.1.4.1.7262.2.3.8.1.1.5 | INTEGER | RO | mandatory | |||||||||||||
column · INTEGER · read-only · mandatory Specifies whether traps are to be sent to this specific host or not
| |||||||||||||||||
| ThzIduSnmpV3TrapHostsTable | 1.3.6.1.4.1.7262.2.3.8.2 | NA | mandatory | ||||||||||||||
table · not-accessible · mandatory Table containing snmp V3 trap host entries | |||||||||||||||||
| RhzIduSnmpV3TrapHostsEntry | 1.3.6.1.4.1.7262.2.3.8.2.1 | NA | mandatory | ||||||||||||||
row · not-accessible · mandatory Contains the snmp v3 trap host information | |||||||||||||||||
| ChzIduSnmpV3TrapHostsIndex | 1.3.6.1.4.1.7262.2.3.8.2.1.1 | INTEGER (0..4) | RO | mandatory | |||||||||||||
column · INTEGER (0..4) · read-only · mandatory A unique value for each v3 trap host. | |||||||||||||||||
| CsnmpV3TrapHostIpAddress | 1.3.6.1.4.1.7262.2.3.8.2.1.2 | IpAddress | RO | mandatory | |||||||||||||
column · IpAddress · read-only · mandatory Indicates snmp trap host IP address. | |||||||||||||||||
| CsnmpV3TrapHostUserName | 1.3.6.1.4.1.7262.2.3.8.2.1.3 | DisplayString (SIZE (0..24)) | RO | mandatory | |||||||||||||
column · DisplayString (SIZE (0..24)) · read-only · mandatory The user name of the v3 trap host. | |||||||||||||||||
| CsnmpV3TrapHostAuthProtocol | 1.3.6.1.4.1.7262.2.3.8.2.1.4 | INTEGER | RO | mandatory | |||||||||||||
column · INTEGER · read-only · mandatory The authentication alogorithm used by the v3 trap host.
| |||||||||||||||||
| CsnmpV3TrapHostAuthPassword | 1.3.6.1.4.1.7262.2.3.8.2.1.5 | DisplayString (SIZE (0..24)) | RO | mandatory | |||||||||||||
column · DisplayString (SIZE (0..24)) · read-only · mandatory The authentication password of the v3 trap host. | |||||||||||||||||
| CsnmpV3TrapHostPrivProtocol | 1.3.6.1.4.1.7262.2.3.8.2.1.6 | INTEGER | RO | mandatory | |||||||||||||
column · INTEGER · read-only · mandatory The privacy encryption alogorithm used by the v3 trap host.
| |||||||||||||||||
| CsnmpV3TrapHostPrivPassword | 1.3.6.1.4.1.7262.2.3.8.2.1.7 | DisplayString (SIZE (0..24)) | RO | mandatory | |||||||||||||
column · DisplayString (SIZE (0..24)) · read-only · mandatory The privacy password of the v3 trap host. | |||||||||||||||||
| CsnmpV3TrapHostActivated | 1.3.6.1.4.1.7262.2.3.8.2.1.8 | INTEGER | RO | mandatory | |||||||||||||
column · INTEGER · read-only · mandatory Specifies whether a specific v3 trap host is allowed to access the system
| |||||||||||||||||
| NhzIduTrapEnable | 1.3.6.1.4.1.7262.2.3.8.3 | ||||||||||||||||
| ShzIduColdStartTrap | 1.3.6.1.4.1.7262.2.3.8.3.1 | INTEGER | RW | mandatory | |||||||||||||
scalar · INTEGER · read-write · mandatory Specifies whether this trap is to be sent or not.
| |||||||||||||||||
| ShzIduLinkDownTrap | 1.3.6.1.4.1.7262.2.3.8.3.2 | INTEGER | RW | mandatory | |||||||||||||
scalar · INTEGER · read-write · mandatory Specifies whether this trap is to be sent or not.
| |||||||||||||||||
| ShzIduLinkUpTrap | 1.3.6.1.4.1.7262.2.3.8.3.3 | INTEGER | RW | mandatory | |||||||||||||
scalar · INTEGER · read-write · mandatory Specifies whether this trap is to be sent or not.
| |||||||||||||||||
| ShzIduExplicitAuthenticationFailureTrap | 1.3.6.1.4.1.7262.2.3.8.3.4 | INTEGER | RW | mandatory | |||||||||||||
scalar · INTEGER · read-write · mandatory Specifies whether this trap is to be sent or not.
| |||||||||||||||||
| ShzIduAamConfigMismatchTrap | 1.3.6.1.4.1.7262.2.3.8.3.5 | INTEGER | RW | mandatory | |||||||||||||
scalar · INTEGER · read-write · mandatory Enables or disables the aamConfigMismatch trap.
| |||||||||||||||||
| ShzIduAamActiveTrap | 1.3.6.1.4.1.7262.2.3.8.3.6 | INTEGER | RW | mandatory | |||||||||||||
scalar · INTEGER · read-write · mandatory Enables or disables the aamActive trap.
| |||||||||||||||||
| ShzIduAtpcConfigMismatchTrap | 1.3.6.1.4.1.7262.2.3.8.3.7 | INTEGER | RW | mandatory | |||||||||||||
scalar · INTEGER · read-write · mandatory Enables or disables the trap.
| |||||||||||||||||
| ShzIduSntpServersUnreachableTrap | 1.3.6.1.4.1.7262.2.3.8.3.8 | INTEGER | RW | mandatory | |||||||||||||
scalar · INTEGER · read-write · mandatory Enables or disables the trap.
| |||||||||||||||||
| ShzIduFrequencyFileInvalidTrap | 1.3.6.1.4.1.7262.2.3.8.3.9 | INTEGER | RW | mandatory | |||||||||||||
scalar · INTEGER · read-write · mandatory Enables or disables the trap.
| |||||||||||||||||
| ShzIduEnetPortDroppedFramesThresholdExceedTrap | 1.3.6.1.4.1.7262.2.3.8.3.10 | INTEGER | RW | mandatory | |||||||||||||
scalar · INTEGER · read-write · mandatory Enables or disables the trap.
| |||||||||||||||||
| ShzIduEnetPortBandwidthUtilizationThresholdExceedTrap | 1.3.6.1.4.1.7262.2.3.8.3.11 | INTEGER | RW | mandatory | |||||||||||||
scalar · INTEGER · read-write · mandatory Enables or disables the trap.
| |||||||||||||||||
| ShzIduEnetPortRlsMismatchTrap | 1.3.6.1.4.1.7262.2.3.8.3.12 | INTEGER | RW | mandatory | |||||||||||||
scalar · INTEGER · read-write · mandatory Enables or disables the trap.
| |||||||||||||||||
| ShzIduRLSQueueBasedShutdownActivatedTrap | 1.3.6.1.4.1.7262.2.3.8.3.13 | INTEGER | RW | mandatory | |||||||||||||
scalar · INTEGER · read-write · mandatory Enables or disables the Queue-Based RLS Shutdown trap.
| |||||||||||||||||
| ShzIduModemRxLossOfSignalLockTrap | 1.3.6.1.4.1.7262.2.3.8.3.14 | INTEGER | RW | mandatory | |||||||||||||
scalar · INTEGER · read-write · mandatory Specifies whether this trap is to be sent or not.
| |||||||||||||||||
| ShzIduModemTxLossOfSyncTrap | 1.3.6.1.4.1.7262.2.3.8.3.15 | INTEGER | RW | mandatory | |||||||||||||
scalar · INTEGER · read-write · mandatory Specifies whether this trap is to be sent or not.
| |||||||||||||||||
| ShzIduModemSnrBelowThresholdTrap | 1.3.6.1.4.1.7262.2.3.8.3.16 | INTEGER | RW | mandatory | |||||||||||||
scalar · INTEGER · read-write · mandatory Specifies whether this trap is to be sent or not.
| |||||||||||||||||
| ShzIduModemEqualizerStressExceedThresholdTrap | 1.3.6.1.4.1.7262.2.3.8.3.17 | INTEGER | RW | mandatory | |||||||||||||
scalar · INTEGER · read-write · mandatory Specifies whether this trap is to be sent or not.
| |||||||||||||||||
| ShzIduModemChannelizedRslBelowThresholdTrap | 1.3.6.1.4.1.7262.2.3.8.3.18 | INTEGER | RW | mandatory | |||||||||||||
scalar · INTEGER · read-write · mandatory Enables or disables the trap.
| |||||||||||||||||
| ShzIduModemHardwareFaultTrap | 1.3.6.1.4.1.7262.2.3.8.3.19 | INTEGER | RW | mandatory | |||||||||||||
scalar · INTEGER · read-write · mandatory Specifies whether this trap is to be sent or not.
| |||||||||||||||||
| ShzIduModemProgrammingErrorTrap | 1.3.6.1.4.1.7262.2.3.8.3.20 | INTEGER | RW | mandatory | |||||||||||||
scalar · INTEGER · read-write · mandatory Specifies whether this trap is to be sent or not.
| |||||||||||||||||
| ShzIduTtyManagementSessionCommencedTrap | 1.3.6.1.4.1.7262.2.3.8.3.21 | INTEGER | RW | mandatory | |||||||||||||
scalar · INTEGER · read-write · mandatory Specifies whether this trap is to be sent or not.
| |||||||||||||||||
| ShzIduTtyManagementSessionTerminatedTrap | 1.3.6.1.4.1.7262.2.3.8.3.22 | INTEGER | RW | mandatory | |||||||||||||
scalar · INTEGER · read-write · mandatory Specifies whether this trap is to be sent or not.
| |||||||||||||||||
| ShzIduAtpcTxAtMaxPwrTrap | 1.3.6.1.4.1.7262.2.3.8.3.23 | INTEGER | RW | mandatory | |||||||||||||
scalar · INTEGER · read-write · mandatory Specifies whether this trap is to be sent or not.
| |||||||||||||||||
| ShzIduRadioPLDROLostLockTrap | 1.3.6.1.4.1.7262.2.3.8.3.24 | INTEGER | RW | mandatory | |||||||||||||
scalar · INTEGER · read-write · mandatory Specifies whether this trap is to be sent or not.
| |||||||||||||||||
| ShzIduRadioLostCommunicationTrap | 1.3.6.1.4.1.7262.2.3.8.3.25 | INTEGER | RW | mandatory | |||||||||||||
scalar · INTEGER · read-write · mandatory Specifies whether this trap is to be sent or not.
| |||||||||||||||||
| ShzIduRadioMismatchTrap | 1.3.6.1.4.1.7262.2.3.8.3.26 | INTEGER | RW | mandatory | |||||||||||||
scalar · INTEGER · read-write · mandatory Specifies whether this trap is to be sent or not.
| |||||||||||||||||
| ShzIduRadioPowerAmpTrap | 1.3.6.1.4.1.7262.2.3.8.3.27 | INTEGER | RW | mandatory | |||||||||||||
scalar · INTEGER · read-write · mandatory Specifies whether this trap is to be sent or not.
| |||||||||||||||||
| ShzIduRadioExcessiveTxCableLossTrap | 1.3.6.1.4.1.7262.2.3.8.3.28 | INTEGER | RW | mandatory | |||||||||||||
scalar · INTEGER · read-write · mandatory Specifies whether this trap is to be sent or not.
| |||||||||||||||||
| ShzIduHiPowerRadioDrainM1Trap | 1.3.6.1.4.1.7262.2.3.8.3.29 | INTEGER | RW | mandatory | |||||||||||||
scalar · INTEGER · read-write · mandatory Specifies whether this trap is to be sent or not.
| |||||||||||||||||
| ShzIduHiPowerRadioDrainM2Trap | 1.3.6.1.4.1.7262.2.3.8.3.30 | INTEGER | RW | mandatory | |||||||||||||
scalar · INTEGER · read-write · mandatory Specifies whether this trap is to be sent or not.
| |||||||||||||||||
| ShzIduHiPowerRadioTxDetectorTrap | 1.3.6.1.4.1.7262.2.3.8.3.31 | INTEGER | RW | mandatory | |||||||||||||
scalar · INTEGER · read-write · mandatory Specifies whether this trap is to be sent or not.
| |||||||||||||||||
| ShzIduSecondaryRadioIsActiveTrap | 1.3.6.1.4.1.7262.2.3.8.3.32 | INTEGER | RW | mandatory | |||||||||||||
scalar · INTEGER · read-write · mandatory Specifies whether this trap is to be sent or not.
| |||||||||||||||||
| ShzIduRedundancySerialNumberMisMatchTrap | 1.3.6.1.4.1.7262.2.3.8.3.33 | INTEGER | RW | mandatory | |||||||||||||
scalar · INTEGER · read-write · mandatory Specifies whether this trap is to be sent or not.
| |||||||||||||||||
| ShzIduRadioFirmwareMismatchTrap | 1.3.6.1.4.1.7262.2.3.8.3.34 | INTEGER | RW | mandatory | |||||||||||||
scalar · INTEGER · read-write · mandatory Specifies whether this trap is to be sent or not.
| |||||||||||||||||
| ShzIduSecondaryRadioNotdetectedTrap | 1.3.6.1.4.1.7262.2.3.8.3.35 | INTEGER | RW | mandatory | |||||||||||||
scalar · INTEGER · read-write · mandatory Specifies whether this trap is to be sent or not.
| |||||||||||||||||
| ShzIduPrimaryRadioNotdetectedTrap | 1.3.6.1.4.1.7262.2.3.8.3.36 | INTEGER | RW | mandatory | |||||||||||||
scalar · INTEGER · read-write · mandatory Specifies whether this trap is to be sent or not.
| |||||||||||||||||
| ShzIduFaultyPrimaryRadioTrap | 1.3.6.1.4.1.7262.2.3.8.3.37 | INTEGER | RW | mandatory | |||||||||||||
scalar · INTEGER · read-write · mandatory Specifies whether this trap is to be sent or not.
| |||||||||||||||||
| ShzIduRadioExcessiveTxCableLossChangeTrap | 1.3.6.1.4.1.7262.2.3.8.3.38 | INTEGER | RW | mandatory | |||||||||||||
scalar · INTEGER · read-write · mandatory Specifies whether this trap is to be sent or not.
| |||||||||||||||||
| ShzIduRadioExcessiveRxCableLossTrap | 1.3.6.1.4.1.7262.2.3.8.3.39 | INTEGER | RW | mandatory | |||||||||||||
scalar · INTEGER · read-write · mandatory Specifies whether this trap is to be sent or not.
| |||||||||||||||||
| ShzIduRedundancyPrimaryPortNotSetTrap | 1.3.6.1.4.1.7262.2.3.8.3.40 | INTEGER | RW | mandatory | |||||||||||||
scalar · INTEGER · read-write · mandatory Specifies whether this trap is to be sent or not.
| |||||||||||||||||
| ShzIduRedundancySecondaryPortIsActiveTrap | 1.3.6.1.4.1.7262.2.3.8.3.41 | INTEGER | RW | mandatory | |||||||||||||
scalar · INTEGER · read-write · mandatory Specifies whether this trap is to be sent or not.
| |||||||||||||||||
| ShzIduRedundancyPrimaryPortFaultyTrap | 1.3.6.1.4.1.7262.2.3.8.3.42 | INTEGER | RW | mandatory | |||||||||||||
scalar · INTEGER · read-write · mandatory Specifies whether this trap is to be sent or not.
| |||||||||||||||||
| ShzIduRedundancySecondaryPortFaultyTrap | 1.3.6.1.4.1.7262.2.3.8.3.43 | INTEGER | RW | mandatory | |||||||||||||
scalar · INTEGER · read-write · mandatory Specifies whether this trap is to be sent or not.
| |||||||||||||||||
| ShzIduFan1FailedTrap | 1.3.6.1.4.1.7262.2.3.8.3.44 | INTEGER | RW | mandatory | |||||||||||||
scalar · INTEGER · read-write · mandatory Specifies whether this trap is to be sent or not.
| |||||||||||||||||
| ShzIduFan2FailedTrap | 1.3.6.1.4.1.7262.2.3.8.3.45 | INTEGER | RW | mandatory | |||||||||||||
scalar · INTEGER · read-write · mandatory Specifies whether this trap is to be sent or not.
| |||||||||||||||||
| ShzIduFan3FailedTrap | 1.3.6.1.4.1.7262.2.3.8.3.46 | INTEGER | RW | mandatory | |||||||||||||
scalar · INTEGER · read-write · mandatory Specifies whether this trap is to be sent or not.
| |||||||||||||||||
| ShzIduFan4FailedTrap | 1.3.6.1.4.1.7262.2.3.8.3.47 | INTEGER | RW | mandatory | |||||||||||||
scalar · INTEGER · read-write · mandatory Specifies whether this trap is to be sent or not.
| |||||||||||||||||
| ShzIduPortRLSShutdownActivatedTrap | 1.3.6.1.4.1.7262.2.3.8.3.48 | INTEGER | RW | mandatory | |||||||||||||
scalar · INTEGER · read-write · mandatory Enables or disables the RLS Shutdown trap.
| |||||||||||||||||
| NhzIduSnmp | 1.3.6.1.4.1.7262.2.3.9 | ||||||||||||||||
| ShzIduSnmpUserAccess | 1.3.6.1.4.1.7262.2.3.9.1 | INTEGER | RO | mandatory | |||||||||||||
scalar · INTEGER · read-only · mandatory Specifies the user access to the system. If access is set to 'explicitManagers' then only managers with ip addresses set in snmpManagersTable will be able to gain SNMP access to the system. If access is set to 'any' then any manager will be able to gain SNMP access to the system
| |||||||||||||||||
| ShzIduSnmpManagerAnyCommunityName | 1.3.6.1.4.1.7262.2.3.9.2 | DisplayString (SIZE (0..24)) | RO | mandatory | |||||||||||||
scalar · DisplayString (SIZE (0..24)) · read-only · mandatory The community string name used by the 'any' manager. | |||||||||||||||||
| ShzIduSnmpSetRequests | 1.3.6.1.4.1.7262.2.3.9.3 | INTEGER | RO | mandatory | |||||||||||||
scalar · INTEGER · read-only · mandatory Indicates whether SNMP SET requests are allowed.
| |||||||||||||||||
| ThzIduSnmpManagersTable | 1.3.6.1.4.1.7262.2.3.9.4 | NA | mandatory | ||||||||||||||
table · not-accessible · mandatory Table containing snmp manager entries | |||||||||||||||||
| RhzIduSnmpManagersEntry | 1.3.6.1.4.1.7262.2.3.9.4.1 | NA | mandatory | ||||||||||||||
| ChzIduSnmpManagersIndex | 1.3.6.1.4.1.7262.2.3.9.4.1.1 | INTEGER | RO | mandatory | |||||||||||||
column · INTEGER · read-only · mandatory A unique value for each manager. | |||||||||||||||||
| ChzIduSnmpManagerIpAddress | 1.3.6.1.4.1.7262.2.3.9.4.1.2 | IpAddress | RO | mandatory | |||||||||||||
column · IpAddress · read-only · mandatory The IP address of the Manager. | |||||||||||||||||
| ChzIduSnmpManagerCommunityName | 1.3.6.1.4.1.7262.2.3.9.4.1.3 | DisplayString (SIZE (0..24)) | RO | mandatory | |||||||||||||
column · DisplayString (SIZE (0..24)) · read-only · mandatory The community string name used by the manager. | |||||||||||||||||
| ChzIduSnmpManagerActivated | 1.3.6.1.4.1.7262.2.3.9.4.1.4 | INTEGER | RO | mandatory | |||||||||||||
column · INTEGER · read-only · mandatory Specifies whether a specific manager is allowed to access the system
| |||||||||||||||||
| ThzIduSnmpV3ManagersTable | 1.3.6.1.4.1.7262.2.3.9.5 | NA | mandatory | ||||||||||||||
table · not-accessible · mandatory Table containing snmp V3 manager entries | |||||||||||||||||
| RhzIduSnmpV3ManagersEntry | 1.3.6.1.4.1.7262.2.3.9.5.1 | NA | mandatory | ||||||||||||||
row · not-accessible · mandatory Contains the snmp v3 manager information | |||||||||||||||||
| ChzIduSnmpV3ManagersIndex | 1.3.6.1.4.1.7262.2.3.9.5.1.1 | INTEGER | RO | mandatory | |||||||||||||
column · INTEGER · read-only · mandatory A unique value for each v3 manager. | |||||||||||||||||
| ChzIduSnmpV3ManagerUserName | 1.3.6.1.4.1.7262.2.3.9.5.1.2 | DisplayString (SIZE (0..24)) | RO | mandatory | |||||||||||||
column · DisplayString (SIZE (0..24)) · read-only · mandatory The user name of the v3 Manager. | |||||||||||||||||
| ChzIduSnmpV3ManagerAuthProtocol | 1.3.6.1.4.1.7262.2.3.9.5.1.3 | INTEGER | RO | mandatory | |||||||||||||
column · INTEGER · read-only · mandatory The authentication alogorithm used by the v3 manager.
| |||||||||||||||||
| ChzIduSnmpV3ManagerAuthPassword | 1.3.6.1.4.1.7262.2.3.9.5.1.4 | DisplayString (SIZE (0..24)) | RO | mandatory | |||||||||||||
column · DisplayString (SIZE (0..24)) · read-only · mandatory The authentication password of the v3 Manager. | |||||||||||||||||
| ChzIduSnmpV3ManagerPrivProtocol | 1.3.6.1.4.1.7262.2.3.9.5.1.5 | INTEGER | RO | mandatory | |||||||||||||
column · INTEGER · read-only · mandatory The privacy encryption alogorithm used by the v3 manager.
| |||||||||||||||||
| ChzIduSnmpV3ManagerPrivPassword | 1.3.6.1.4.1.7262.2.3.9.5.1.6 | DisplayString (SIZE (0..24)) | RO | mandatory | |||||||||||||
column · DisplayString (SIZE (0..24)) · read-only · mandatory The privacy password of the v3 Manager. | |||||||||||||||||
| ChzIduSnmpV3ManagerActivated | 1.3.6.1.4.1.7262.2.3.9.5.1.7 | INTEGER | RO | mandatory | |||||||||||||
column · INTEGER · read-only · mandatory Specifies whether a specific v3 manager is allowed to access the system
| |||||||||||||||||
| NhzIduManagementSessions | 1.3.6.1.4.1.7262.2.3.10 | ||||||||||||||||
| ThzIduTtySessionUserTable | 1.3.6.1.4.1.7262.2.3.10.1 | NA | mandatory | ||||||||||||||
table · not-accessible · mandatory A table of Wireless Interface Radios | |||||||||||||||||
| RhzIduTtySessionUserEntry | 1.3.6.1.4.1.7262.2.3.10.1.1 | NA | mandatory | ||||||||||||||
| ChzIduTtySessionUserIndex | 1.3.6.1.4.1.7262.2.3.10.1.1.1 | INTEGER | RO | mandatory | |||||||||||||
column · INTEGER · read-only · mandatory A unique value for each user.
| |||||||||||||||||
| ChzIduTtySessionUserName | 1.3.6.1.4.1.7262.2.3.10.1.1.2 | DisplayString (SIZE (0..32)) | RO | mandatory | |||||||||||||
column · DisplayString (SIZE (0..32)) · read-only · mandatory The username of a management session using Telnet or HTTP. The session state variable must be checked to determine if the management session is currently in progress. | |||||||||||||||||
| ChzIduTtySessionUserConnectionType | 1.3.6.1.4.1.7262.2.3.10.1.1.3 | INTEGER | RO | mandatory | |||||||||||||
column · INTEGER · read-only · mandatory The physical port used to log in to the system. The serial port is always local to the equipment. The 10BaseT connector may be local, or remote, depending on if the configuration of network management port. The inband connection is the port carrying customer traffic.
| |||||||||||||||||
| ChzIduTtySessionUserState | 1.3.6.1.4.1.7262.2.3.10.1.1.4 | INTEGER | RO | mandatory | |||||||||||||
column · INTEGER · read-only · mandatory The state of the session. The session is inProgress if the user is currently logged into the system. The session is terminated if the user has logged out of the system.
| |||||||||||||||||
| NhzIduHttp | 1.3.6.1.4.1.7262.2.3.11 | ||||||||||||||||
| ShzIduHttpEnable | 1.3.6.1.4.1.7262.2.3.11.1 | INTEGER | RW | mandatory | |||||||||||||
scalar · INTEGER · read-write · mandatory Indicates whether HTTP is enabled.
| |||||||||||||||||
| NhzIduHttpSecure | 1.3.6.1.4.1.7262.2.3.11.2 | ||||||||||||||||
| ShzIduHttpSecureCertificateStatus | 1.3.6.1.4.1.7262.2.3.11.2.1 | DisplayString (SIZE (0..100)) | RO | mandatory | |||||||||||||
scalar · DisplayString (SIZE (0..100)) · read-only · mandatory Returns the HTTPS certificate status | |||||||||||||||||
| ShzIduHttpSecureAccessForAdminUsers | 1.3.6.1.4.1.7262.2.3.11.2.2 | INTEGER | RW | mandatory | |||||||||||||
scalar · INTEGER · read-write · mandatory the HTTPS access requirement for Admin user group.
| |||||||||||||||||
| ShzIduHttpSecureAccessForNocUsers | 1.3.6.1.4.1.7262.2.3.11.2.3 | INTEGER | RW | mandatory | |||||||||||||
scalar · INTEGER · read-write · mandatory the HTTPS access requirement for Noc user group.
| |||||||||||||||||
| ShzIduHttpSecureAccessForSuperUsers | 1.3.6.1.4.1.7262.2.3.11.2.4 | INTEGER | RW | mandatory | |||||||||||||
scalar · INTEGER · read-write · mandatory the HTTPS access requirement for Super user group.
| |||||||||||||||||
| NhzIduQos | 1.3.6.1.4.1.7262.2.3.12 | ||||||||||||||||
| ShzIduQosEnable | 1.3.6.1.4.1.7262.2.3.12.1 | INTEGER | RW | mandatory | |||||||||||||
scalar · INTEGER · read-write · mandatory Indicates whether QOS is enabled.
| |||||||||||||||||
| ShzIduCosType | 1.3.6.1.4.1.7262.2.3.12.2 | INTEGER | RW | mandatory | |||||||||||||
scalar · INTEGER · read-write · mandatory Indicates the class of service tag type. Based on the setting Horizon will use the CoS value in the VLAN tag, or Q-in-Q inner VLAN tag, or Q-in-Q outer VLAN tag.
| |||||||||||||||||
| ShzIduCoSQinQiTag | 1.3.6.1.4.1.7262.2.3.12.3 | DisplayString | RW | mandatory | |||||||||||||
scalar · DisplayString · read-write · mandatory Sets the value of the Q-in-Q inner tag. This tag is also used to classify the non-Q-in-Q VLAN. Default value is 0x8100. | |||||||||||||||||
| ShzIduCoSQinQoTag | 1.3.6.1.4.1.7262.2.3.12.4 | DisplayString | RW | mandatory | |||||||||||||
scalar · DisplayString · read-write · mandatory Sets the value of the Q-in-Q outer VLAN tag. Default value is 0x8100. | |||||||||||||||||
| ShzIduCosQueueMapping | 1.3.6.1.4.1.7262.2.3.12.5 | DisplayString (SIZE (15..32)) | RW | mandatory | |||||||||||||
scalar · DisplayString (SIZE (15..32)) · read-write · mandatory User queue assignments for CoS values 0 to 7. There are 4 coS queues. Their corresponding queue numbers are 1,2, 3, where 1 is the lowest priority queue and 4 is the highest priority queue. CoS to queue mapping example: 1 1 2 2 3 3 4 4. | |||||||||||||||||
| ShzIduCosExpediteQueue | 1.3.6.1.4.1.7262.2.3.12.6 | INTEGER | RW | mandatory | |||||||||||||
scalar · INTEGER · read-write · mandatory This sets the user queue operation mode. (a) In expedite mode, any Queue can be assigned 100% of CIR. Queue 4 is serviced first and queue 1 is servcied last.(b) In non expedite mode, the sum of all CIRs must be equal to 100%. In this mode higher priority queues will be serviced first until that queue is emptied or the defined CIR is reached.
| |||||||||||||||||
| ShzIduCosQueueCIR | 1.3.6.1.4.1.7262.2.3.12.7 | DisplayString (SIZE (0..32)) | RW | mandatory | |||||||||||||
scalar · DisplayString (SIZE (0..32)) · read-write · mandatory Committed Information Rate (CIR) assignments for CoS queues 1 to 4. CIR is assigned as the percentage of system current speed. When expedite queue is enabled any queue can be assigned 100% bandwidth. When expedite queue is disabled the sum of CIR of all queues should be 100. | |||||||||||||||||
| ShzIduCosQueueCBS | 1.3.6.1.4.1.7262.2.3.12.8 | DisplayString (SIZE (0..32)) | RW | mandatory | |||||||||||||
scalar · DisplayString (SIZE (0..32)) · read-write · mandatory Comitted Burst Size (CBS) for CoS queues 1 to 4. CBS is the percentage of total packet buffer size. The sum of CBS's of all 4 queues must be equal to 100. Minimum CBS assignable to any queue is 1. | |||||||||||||||||
| ShzIduCosDefaultValue | 1.3.6.1.4.1.7262.2.3.12.9 | INTEGER (0..7) | RW | mandatory | |||||||||||||
scalar · INTEGER (0..7) · read-write · mandatory Default CoS value assigned to the ethernet frames that don't have VLAN or Q-in-Q tag. | |||||||||||||||||
| ShzIduCutThroughProcessing | 1.3.6.1.4.1.7262.2.3.12.10 | INTEGER | RW | mandatory | |||||||||||||
scalar · INTEGER · read-write · mandatory Sets cut through processing on/off.
| |||||||||||||||||
| ShzIduQosPolicy | 1.3.6.1.4.1.7262.2.3.12.11 | INTEGER | RW | mandatory | |||||||||||||
scalar · INTEGER · read-write · mandatory Sets the Qos policy.
| |||||||||||||||||
| ShzIduCosWfqWeight | 1.3.6.1.4.1.7262.2.3.12.12 | DisplayString (SIZE (0..32)) | RW | mandatory | |||||||||||||
scalar · DisplayString (SIZE (0..32)) · read-write · mandatory The weight assigned to each of the 4 cos queue. The wireless bandwidth is distributed amongst the
queues proportional to their weight.
The weights have values from 0-15, where 0 is the lowest weight and
15 is the highest weight.
Setting the Cos weight example: 1 2 3 4. | |||||||||||||||||
| NhzIduRapidLinkShutdown | 1.3.6.1.4.1.7262.2.3.13 | ||||||||||||||||
| ShzIduRlsEnable | 1.3.6.1.4.1.7262.2.3.13.1 | INTEGER | RW | mandatory | |||||||||||||
scalar · INTEGER · read-write · mandatory The Rapid Link Shutdown feature: enabled or disabled. Changing this option requires a system reset.
| |||||||||||||||||
| ShzIduRlsHardFaultMonitor | 1.3.6.1.4.1.7262.2.3.13.2 | INTEGER | RW | mandatory | |||||||||||||
scalar · INTEGER · read-write · mandatory Enable the rlsHardFaultMonitor for rapid detection of severely degrade link. When disabled only the RLS Link Degrade Monitor is used.
| |||||||||||||||||
| ShzIduRlsWirelessPortOption | 1.3.6.1.4.1.7262.2.3.13.3 | INTEGER | RW | mandatory | |||||||||||||
scalar · INTEGER · read-write · mandatory anyport - If the IDU is operating with two wireless ports and any one of the wireless ports goes down disables the ethernet port. bothports - In the above condition, this feature disables the ehternet traffic through the faulty wireless link but continuously send ethernet traffic through the other good wireless port. If the remaining wireless port also exceeds the error thereshold, ethernet port will be disabled
| |||||||||||||||||
| ShzIduRlsAutomaticLinkReestablish | 1.3.6.1.4.1.7262.2.3.13.4 | INTEGER | RW | mandatory | |||||||||||||
scalar · INTEGER · read-write · mandatory If this feature is enabled, the link will be automatically reestablished If this feature is disabled, the user must explicitly use the manualReestablish object to bring the link back up
| |||||||||||||||||
| ShzIduRlsManualLinkReestablish | 1.3.6.1.4.1.7262.2.3.13.5 | INTEGER | RW | mandatory | |||||||||||||
scalar · INTEGER · read-write · mandatory This object is writeable ONLY if automaticLinkReestablish is set to disabled. The user explicitly brings the link back up by setting this object to enabled. The user explicitly brings the link down by setting this object to disabled. to bring the link back up
| |||||||||||||||||
| ShzIduWriteRlsMonitorParametersToSystem | 1.3.6.1.4.1.7262.2.3.13.6 | INTEGER | RW | mandatory | |||||||||||||
scalar · INTEGER · read-write · mandatory This writes RLS soft and hard fault monitor parameters to RAM Reading this object returns '1'.
| |||||||||||||||||
| ShzIduRlsDroppedFramesThresholdOverride | 1.3.6.1.4.1.7262.2.3.13.7 | INTEGER | RW | mandatory | |||||||||||||
scalar · INTEGER · read-write · mandatory If the Ethernet is down due to Queue-Based Rls shutdown, this will bring the ethernet back and obey the queue settings. Reading this object returns '1'.
| |||||||||||||||||
| ThzIduRlsDroppedFramesThresholdTable | 1.3.6.1.4.1.7262.2.3.13.8 | NA | mandatory | ||||||||||||||
table · not-accessible · mandatory A table of RLS Queue Monitor Parameters | |||||||||||||||||
| RhzIduRlsDroppedFramesThresholdEntry | 1.3.6.1.4.1.7262.2.3.13.8.1 | NA | mandatory | ||||||||||||||
| ChzIduRlsDroppedFramesThresholdIndex | 1.3.6.1.4.1.7262.2.3.13.8.1.1 | INTEGER | RO | mandatory | |||||||||||||
column · INTEGER · read-only · mandatory A unique value for each interface.
| |||||||||||||||||
| ChzIduRlsAllowedDroppedFrameRateValue | 1.3.6.1.4.1.7262.2.3.13.8.1.2 | DisplayString | RW | mandatory | |||||||||||||
column · DisplayString · read-write · mandatory Maximum allowed ethernet frame drop rate. If the average drop rate exceeds this threshold in any of the 4 queues, the Ethernet port will be shut down. This feture is availabe only with bothports option | |||||||||||||||||
| ChzIduRlsDroppedFrameMonitorPeriod | 1.3.6.1.4.1.7262.2.3.13.8.1.3 | INTEGER | RW | mandatory | |||||||||||||
column · INTEGER · read-write · mandatory The monitoring period in seconds. | |||||||||||||||||
| ThzIduRlsSoftFaultMonitorTable | 1.3.6.1.4.1.7262.2.3.13.9 | NA | mandatory | ||||||||||||||
table · not-accessible · mandatory A table of RLS Soft Fault Monitor Parameters | |||||||||||||||||
| RhzIduRlsSoftFaultMonitorEntry | 1.3.6.1.4.1.7262.2.3.13.9.1 | NA | mandatory | ||||||||||||||
row · not-accessible · mandatory RLS Parameters for Soft Fault Monitoring | |||||||||||||||||
| ChzIduRlsSoftFaultMonitorIndex | 1.3.6.1.4.1.7262.2.3.13.9.1.1 | INTEGER | RO | mandatory | |||||||||||||
column · INTEGER · read-only · mandatory A unique value for each interface.
| |||||||||||||||||
| ChzIduRlsEstablishErredFrameThreshold | 1.3.6.1.4.1.7262.2.3.13.9.1.2 | INTEGER | RW | mandatory | |||||||||||||
column · INTEGER · read-write · mandatory Maximum erred blocks, per sample, allowed for link establishment. | |||||||||||||||||
| ChzIduRlsShutdownErredFrameThreshold | 1.3.6.1.4.1.7262.2.3.13.9.1.3 | INTEGER | RW | mandatory | |||||||||||||
column · INTEGER · read-write · mandatory Minimum erred blocks, per sample, allowed before link shutdown. | |||||||||||||||||
| ChzIduRlsEstablishNumberOfSamples | 1.3.6.1.4.1.7262.2.3.13.9.1.4 | INTEGER | RW | mandatory | |||||||||||||
column · INTEGER · read-write · mandatory Minimum number of consecutive good samples required before link is established. | |||||||||||||||||
| ChzIduRlsShutdownNumberOfSamples | 1.3.6.1.4.1.7262.2.3.13.9.1.5 | INTEGER | RW | mandatory | |||||||||||||
column · INTEGER · read-write · mandatory Minimum number of consecutive erred samples before link is shutdown. | |||||||||||||||||
| ChzIduRlsEstablishSamplePeriod | 1.3.6.1.4.1.7262.2.3.13.9.1.6 | INTEGER | RW | mandatory | |||||||||||||
column · INTEGER · read-write · mandatory Period of Time, in milliseconds, for monitoring Establish Erred Frame Threshold. | |||||||||||||||||
| ChzIduRlsShutdownSamplePeriod | 1.3.6.1.4.1.7262.2.3.13.9.1.7 | INTEGER | RW | mandatory | |||||||||||||
column · INTEGER · read-write · mandatory Period of Time, in milliseconds, for monitoring Shutdown Erred Frame Threshold. | |||||||||||||||||
| ChzIduRlsQuickShutdownSamplePeriod | 1.3.6.1.4.1.7262.2.3.13.9.1.8 | INTEGER | RW | mandatory | |||||||||||||
column · INTEGER · read-write · mandatory Minimum number of milliseconds required to classify samples as erred. | |||||||||||||||||
| ThzIduHardFaultMonitorTable | 1.3.6.1.4.1.7262.2.3.13.10 | NA | mandatory | ||||||||||||||
table · not-accessible · mandatory A table of RLS Hard Fault Monitor Parameters | |||||||||||||||||
| RhzIduHardFaultMonitorEntry | 1.3.6.1.4.1.7262.2.3.13.10.1 | NA | mandatory | ||||||||||||||
row · not-accessible · mandatory RLS Parameters for Hard Fault Monitoring | |||||||||||||||||
| ChzIduHardFaultMonitorIndex | 1.3.6.1.4.1.7262.2.3.13.10.1.1 | INTEGER | RO | mandatory | |||||||||||||
column · INTEGER · read-only · mandatory A unique value for each interface.
| |||||||||||||||||
| ChzIduRlsHardFaultSamplePeriod | 1.3.6.1.4.1.7262.2.3.13.10.1.2 | INTEGER | RW | mandatory | |||||||||||||
column · INTEGER · read-write · mandatory The period of time, in milliseconds, for which the rlsFaultThreshold is applied. | |||||||||||||||||
| ChzIduRlsHardFaultThreshold | 1.3.6.1.4.1.7262.2.3.13.10.1.3 | INTEGER | RW | mandatory | |||||||||||||
column · INTEGER · read-write · mandatory Acceptalbe errored block rate in percent | |||||||||||||||||
| ThzIduRlsReceiveSignalLevelMonitorTable | 1.3.6.1.4.1.7262.2.3.13.11 | NA | mandatory | ||||||||||||||
table · not-accessible · mandatory A table of RLS RSL Monitor Parameters | |||||||||||||||||
| RhzIduRlsReceiveSignalLevelMonitorEntry | 1.3.6.1.4.1.7262.2.3.13.11.1 | NA | mandatory | ||||||||||||||
row · not-accessible · mandatory RLS RSL Monitor Parameters | |||||||||||||||||
| ChzIduRlsReceiveSignalLevelMonitorIndex | 1.3.6.1.4.1.7262.2.3.13.11.1.1 | INTEGER | RO | mandatory | |||||||||||||
column · INTEGER · read-only · mandatory A unique value for each interface.
| |||||||||||||||||
| ChzIduRlsMakeRslMonitorRslValue | 1.3.6.1.4.1.7262.2.3.13.11.1.2 | DisplayString (SIZE (0..24)) | RW | mandatory | |||||||||||||
column · DisplayString (SIZE (0..24)) · read-write · mandatory The RSL threshold, in dBm. When Link is inactive and if RSL is higher than this threshold for a desired period, the link will become active. | |||||||||||||||||
| ChzIduRlsMakeRslMonitorPeriod | 1.3.6.1.4.1.7262.2.3.13.11.1.3 | INTEGER | RW | mandatory | |||||||||||||
column · INTEGER · read-write · mandatory The desired period, in seconds. When Link is inactive and if RSL is higher than the desired threshold for this period, the link will become active. | |||||||||||||||||
| NhzIduRlsStatus | 1.3.6.1.4.1.7262.2.3.13.12 | ||||||||||||||||
| ThzIduRlsCurrentDroppedFramesTable | 1.3.6.1.4.1.7262.2.3.13.12.1 | NA | mandatory | ||||||||||||||
table · not-accessible · mandatory A table of RLS Currently Observed Queue Monitor Parameters | |||||||||||||||||
| RhzIduRlsCurrentDroppedFramesEntry | 1.3.6.1.4.1.7262.2.3.13.12.1.1 | NA | mandatory | ||||||||||||||
row · not-accessible · mandatory RLS Currently Observed Queue Monitor Parameters | |||||||||||||||||
| ChzIduRlsCurrentDroppedFramesIndex | 1.3.6.1.4.1.7262.2.3.13.12.1.1.1 | INTEGER | RO | mandatory | |||||||||||||
column · INTEGER · read-only · mandatory A unique value for each interface.
| |||||||||||||||||
| ChzIduRlsCurrentDroppedFramesRateValue | 1.3.6.1.4.1.7262.2.3.13.12.1.1.2 | DisplayString | RO | mandatory | |||||||||||||
column · DisplayString · read-only · mandatory RLS Current Ethernet Frame drop rate | |||||||||||||||||
| ChzIduRlsCurrentDroppedFrameMonitorPeriod | 1.3.6.1.4.1.7262.2.3.13.12.1.1.3 | INTEGER | RO | mandatory | |||||||||||||
column · INTEGER · read-only · mandatory Queue Monitoring time | |||||||||||||||||
| ChzIduRlsCurrentQueueStatus | 1.3.6.1.4.1.7262.2.3.13.12.1.1.4 | DisplayString | RO | mandatory | |||||||||||||
column · DisplayString · read-only · mandatory Queue Status - OK: drop rate is within the threshold, Activated: Exceeded the drop threshold | |||||||||||||||||
| ThzIduRlsStatusTable | 1.3.6.1.4.1.7262.2.3.13.12.2 | NA | mandatory | ||||||||||||||
table · not-accessible · mandatory A table of RLS Parameters and states | |||||||||||||||||
| RhzIduRlsStatusEntry | 1.3.6.1.4.1.7262.2.3.13.12.2.1 | NA | mandatory | ||||||||||||||
| ChzIduRlsStatusIndex | 1.3.6.1.4.1.7262.2.3.13.12.2.1.1 | INTEGER | RO | mandatory | |||||||||||||
column · INTEGER · read-only · mandatory A unique value for each interface.
| |||||||||||||||||
| ChzIduRlsOption | 1.3.6.1.4.1.7262.2.3.13.12.2.1.2 | DisplayString | RO | mandatory | |||||||||||||
column · DisplayString · read-only · mandatory RLS Option. On Basic: RLS enabled with base degrade monitoring; On Advanced: RLS enabled with hard fault monitoring; On Anyport: If any one of the wireless links exceeds the threshold Ehternet Port will be shut down On Bothports: Both wireless links should exceed the threshold to bring the Ethernet Port down Off: Entire RLS feature disabled. | |||||||||||||||||
| ChzIduRlsState | 1.3.6.1.4.1.7262.2.3.13.12.2.1.3 | DisplayString | RO | mandatory | |||||||||||||
column · DisplayString · read-only · mandatory Rapid Link Shutdown State. If the state is activated, that means The wireless link is down for Ethernet traffic; If the state is inactivated, that means that wireless link is up for Ethernet traffic. | |||||||||||||||||
| ChzIduRlsMismatchState | 1.3.6.1.4.1.7262.2.3.13.12.2.1.4 | DisplayString | RO | mandatory | |||||||||||||
column · DisplayString · read-only · mandatory RLS Mismatch State. If the state is activated, that means RLS configuration is mismatched with peer. If the state is OK, that means RLS configuration is matched with peer. | |||||||||||||||||
| ChzIduDegradeMonitorState | 1.3.6.1.4.1.7262.2.3.13.12.2.1.5 | DisplayString | RO | mandatory | |||||||||||||
column · DisplayString · read-only · mandatory Degrade Monitor State. If the state is activated, that means the RLS Degrade Monitor is asserting the link down. If the state is OK, that means the RLS Degrade Monitor is asserting the link up. | |||||||||||||||||
| ChzIduHardFaultMonitorState | 1.3.6.1.4.1.7262.2.3.13.12.2.1.6 | DisplayString | RO | mandatory | |||||||||||||
column · DisplayString · read-only · mandatory Hard Fault Monitor State. If the state is activated, that means the Hard Fault Monitor is asserting the link down. If the state is OK, that means the RLS Hard Fault Monitor is asserting the link up. | |||||||||||||||||
| ChzIduMakeRslThresholdState | 1.3.6.1.4.1.7262.2.3.13.12.2.1.7 | DisplayString | RO | mandatory | |||||||||||||
column · DisplayString · read-only · mandatory Make RSL Threshold State. If the state is not met, that means the RLS signal level is below the threshold value. If the state is OK, that means the RLS signal level is above the threshold value. | |||||||||||||||||
| ChzIduPeerRlsState | 1.3.6.1.4.1.7262.2.3.13.12.2.1.8 | DisplayString | RO | mandatory | |||||||||||||
column · DisplayString · read-only · mandatory Peer RLS State. If the state is activated, that means the peer has activated RLS. If the state is OK, that means the Peer hasn't activated RLS. | |||||||||||||||||
| ChzIduRadioInterfaceState | 1.3.6.1.4.1.7262.2.3.13.12.2.1.9 | DisplayString | RO | mandatory | |||||||||||||
column · DisplayString · read-only · mandatory Radio Interface State. If the state is down, that means The radio interface is not operational(muted,disconnected, not configured). If the state is up, that means the radio interface is operational. | |||||||||||||||||
| ChzIduNetworkInterfaceState | 1.3.6.1.4.1.7262.2.3.13.12.2.1.10 | DisplayString | RO | mandatory | |||||||||||||
column · DisplayString · read-only · mandatory Network Interface State. If the state is down, that means the network interface (Ethernet/PHY) is not operational(disconnected, not configured). If the state is up, that means the network interface (Ethernet/PHY) is operational. | |||||||||||||||||
| ChzIduUserConfiguredEstablishFer | 1.3.6.1.4.1.7262.2.3.13.12.2.1.11 | DisplayString | RO | mandatory | |||||||||||||
column · DisplayString · read-only · mandatory User Configured Establish Frame Error Ratio required for the link to be restored to service, set by the user. An example value being '1.0E-7'. | |||||||||||||||||
| ChzIduMinimumAchievableEstablishFer | 1.3.6.1.4.1.7262.2.3.13.12.2.1.12 | DisplayString | RO | mandatory | |||||||||||||
column · DisplayString · read-only · mandatory Minimum achievable Frame Error Ratio required for the link to be restored to service. An example value being '1.0E-7'. | |||||||||||||||||
| ChzIduUserConfiguredShutdownFer | 1.3.6.1.4.1.7262.2.3.13.12.2.1.13 | DisplayString | RO | mandatory | |||||||||||||
column · DisplayString · read-only · mandatory User Configured Shutdown Frame Error Ratio required for the link to remain in-service, set by the user. An example value being '1.0E-7'. | |||||||||||||||||
| ChzIduMinimumAchievableShutdownFer | 1.3.6.1.4.1.7262.2.3.13.12.2.1.14 | DisplayString | RO | mandatory | |||||||||||||
column · DisplayString · read-only · mandatory Minimum achievable Frame Error Ratio required for the link to remain in-service. An example value being '1.0E-7'. | |||||||||||||||||
| ChzIduUserConfiguredEstablishMonitorTime | 1.3.6.1.4.1.7262.2.3.13.12.2.1.15 | INTEGER | RO | mandatory | |||||||||||||
column · INTEGER · read-only · mandatory User Configured Establish Monitor Time, in milliseconds, for which the 'User Configured Establish FER' must be achieved to bring link into service, set by user | |||||||||||||||||
| ChzIduActualEstablishMonitorTime | 1.3.6.1.4.1.7262.2.3.13.12.2.1.16 | INTEGER | RO | mandatory | |||||||||||||
column · INTEGER · read-only · mandatory Actual Establish Monitor Time, in milliseconds, for which the 'User Configured Establish FER' must be achieved to bring link into service, it's a multiple of the establish sample period required to observe the FER | |||||||||||||||||
| ChzIduUserConfiguredShutdownMonitorTime | 1.3.6.1.4.1.7262.2.3.13.12.2.1.17 | INTEGER | RO | mandatory | |||||||||||||
column · INTEGER · read-only · mandatory User Configured Shutdown Monitor Time, in milliseconds, for which the 'User Configured Shutdown FER' must be met for the link to remain in-service, set by user. | |||||||||||||||||
| ChzIduActualShutdownMonitorTime | 1.3.6.1.4.1.7262.2.3.13.12.2.1.18 | INTEGER | RO | mandatory | |||||||||||||
column · INTEGER · read-only · mandatory Actual Shutdown Monitor Time, in milliseconds, for which the 'User Configured Shutdown FER' must be met for the link to remain in-service, it's a multiple of the shutdown sample period required to observe the FER | |||||||||||||||||
| NhzIduSntp | 1.3.6.1.4.1.7262.2.3.14 | ||||||||||||||||
| ShzIduSntpEnable | 1.3.6.1.4.1.7262.2.3.14.1 | INTEGER | RW | mandatory | |||||||||||||
scalar · INTEGER · read-write · mandatory Indicates whether SNTP feature is enabled.
| |||||||||||||||||
| ShzIduSntpOffset | 1.3.6.1.4.1.7262.2.3.14.2 | INTEGER (-140..140) | RW | mandatory | |||||||||||||
scalar · INTEGER (-140..140) · read-write · mandatory System time offset from GMT in tenths of hours. For example, an offset of 10 indicates 10 tenths, or 1 hour. An offset of 5 indicates half an hour. | |||||||||||||||||
| ThzIduSntpServerTable | 1.3.6.1.4.1.7262.2.3.14.3 | NA | mandatory | ||||||||||||||
table · not-accessible · mandatory Table containing sntp server entries | |||||||||||||||||
| RhzIduSntpServerEntry | 1.3.6.1.4.1.7262.2.3.14.3.1 | NA | mandatory | ||||||||||||||
| ChzIduSntpServerIndex | 1.3.6.1.4.1.7262.2.3.14.3.1.1 | INTEGER | RO | mandatory | |||||||||||||
column · INTEGER · read-only · mandatory A unique value for each server. | |||||||||||||||||
| ChzIduSntpServerIpAddress | 1.3.6.1.4.1.7262.2.3.14.3.1.2 | IpAddress | RW | mandatory | |||||||||||||
column · IpAddress · read-write · mandatory The IP address of the server. | |||||||||||||||||
| ChzIduSntpServerStatus | 1.3.6.1.4.1.7262.2.3.14.3.1.3 | INTEGER | RO | mandatory | |||||||||||||
column · INTEGER · read-only · mandatory The status of the sntp server.
| |||||||||||||||||
| ChzIduSntpServerStratum | 1.3.6.1.4.1.7262.2.3.14.3.1.4 | INTEGER | RO | mandatory | |||||||||||||
column · INTEGER · read-only · mandatory Specifies the stratum of a server, 0 for failed server | |||||||||||||||||
| NhzIduLogs | 1.3.6.1.4.1.7262.2.3.15 | ||||||||||||||||
| ShzIduEventLogEnable | 1.3.6.1.4.1.7262.2.3.15.1 | INTEGER | RW | mandatory | |||||||||||||
scalar · INTEGER · read-write · mandatory Indicates whether event log is enabled.
| |||||||||||||||||
| ShzIduPerfmLogEnable | 1.3.6.1.4.1.7262.2.3.15.2 | INTEGER | RW | mandatory | |||||||||||||
scalar · INTEGER · read-write · mandatory Indicates whether performance log is enabled.
| |||||||||||||||||
| ShzIduPerfmLogInterval | 1.3.6.1.4.1.7262.2.3.15.3 | DisplayString (SIZE (0..10)) | RW | mandatory | |||||||||||||
scalar · DisplayString (SIZE (0..10)) · read-write · mandatory Performance statistics are logged periodically by this interval. The interval can be up to 24:00:00 (24 hours) and as short as 00:00:15 (15 seconds). | |||||||||||||||||
| NhzIduRadius | 1.3.6.1.4.1.7262.2.3.16 | ||||||||||||||||
| ShzIduRadiusSuperUserAuthentication | 1.3.6.1.4.1.7262.2.3.16.1 | INTEGER | RW | mandatory | |||||||||||||
scalar · INTEGER · read-write · mandatory The set strict mode on or off
| |||||||||||||||||
| ShzIduRadiusServerTimeOut | 1.3.6.1.4.1.7262.2.3.16.2 | INTEGER | RO | mandatory | |||||||||||||
scalar · INTEGER · read-only · mandatory Timeout period for authentication requests | |||||||||||||||||
| ShzIduRadiusServerDeadTime | 1.3.6.1.4.1.7262.2.3.16.3 | INTEGER | RO | mandatory | |||||||||||||
scalar · INTEGER · read-only · mandatory Time to declare an unresponsive server 'dead' | |||||||||||||||||
| ShzIduRadiusServerReTransmit | 1.3.6.1.4.1.7262.2.3.16.4 | INTEGER | RO | mandatory | |||||||||||||
scalar · INTEGER · read-only · mandatory Maximum number of retransmits to an unresponsive server | |||||||||||||||||
| ThzIduRadiusServerTable | 1.3.6.1.4.1.7262.2.3.16.5 | NA | mandatory | ||||||||||||||
table · not-accessible · mandatory Table containing radius server entries | |||||||||||||||||
| RhzIduRadiusServerEntry | 1.3.6.1.4.1.7262.2.3.16.5.1 | NA | mandatory | ||||||||||||||
| ChzIduRadiusServerIndex | 1.3.6.1.4.1.7262.2.3.16.5.1.1 | INTEGER | RO | mandatory | |||||||||||||
column · INTEGER · read-only · mandatory A unique value for each server. | |||||||||||||||||
| ChzIduRadiusCfgdHostIpAddress | 1.3.6.1.4.1.7262.2.3.16.5.1.2 | IpAddress | RW | mandatory | |||||||||||||
column · IpAddress · read-write · mandatory The IP address of the configured radius server. | |||||||||||||||||
| ChzIduRadiusActiveHostIpAddress | 1.3.6.1.4.1.7262.2.3.16.5.1.3 | IpAddress | RO | mandatory | |||||||||||||
column · IpAddress · read-only · mandatory The IP address of the active radius server. | |||||||||||||||||
Traps / Notifications
- coldStart
1.3.6.1.2.1.11.0.0 - hzIduAamActiveClearedV1Trap
1.3.6.1.4.1.7262.2.3.8.0.8 - hzIduAamActiveV1Trap
1.3.6.1.4.1.7262.2.3.8.0.7 - hzIduAamConfigMisMatchClearV1Trap
1.3.6.1.4.1.7262.2.3.8.0.6 - hzIduAamConfigMisMatchV1Trap
1.3.6.1.4.1.7262.2.3.8.0.5 - hzIduAtpcConfigMismatchClearedV1Trap
1.3.6.1.4.1.7262.2.3.8.0.10 - hzIduAtpcConfigMismatchV1Trap
1.3.6.1.4.1.7262.2.3.8.0.9 - hzIduAtpcTxAtMaxPwrClearedV1Trap
1.3.6.1.4.1.7262.2.3.8.0.39 - hzIduAtpcTxAtMaxPwrV1Trap
1.3.6.1.4.1.7262.2.3.8.0.38 - hzIduEnetPort1BwUtilizationThresholdExceededClearedV1Trap
1.3.6.1.4.1.7262.2.3.8.0.17 - hzIduEnetPort1BwUtilizationThresholdExceededV1Trap
1.3.6.1.4.1.7262.2.3.8.0.16 - hzIduEnetPort1ChannelizedRslBelowThresholdClearedV1Trap
1.3.6.1.4.1.7262.2.3.8.0.31 - hzIduEnetPort1ChannelizedRslBelowThresholdV1Trap
1.3.6.1.4.1.7262.2.3.8.0.30 - hzIduEnetPort1DroppedFramesThresholdExceededClearedV1Trap
1.3.6.1.4.1.7262.2.3.8.0.15 - hzIduEnetPort1DroppedFramesThresholdExceededV1Trap
1.3.6.1.4.1.7262.2.3.8.0.14 - hzIduEnetPort1RlsMismatchClearedV1Trap
1.3.6.1.4.1.7262.2.3.8.0.19 - hzIduEnetPort1RlsMismatchV1Trap
1.3.6.1.4.1.7262.2.3.8.0.18 - hzIduExcessiveRxCableLossClearedV1Trap
1.3.6.1.4.1.7262.2.3.8.0.71 - hzIduExcessiveRxCableLossV1Trap
1.3.6.1.4.1.7262.2.3.8.0.70 - hzIduExplicitAuthenticationFailureClearedV1Trap
1.3.6.1.4.1.7262.2.3.8.0.4 - hzIduExplicitAuthenticationFailureV1Trap
1.3.6.1.4.1.7262.2.3.8.0.3 - hzIduFan1FailedV1Trap
1.3.6.1.4.1.7262.2.3.8.0.80 - hzIduFan1FailureClearedV1Trap
1.3.6.1.4.1.7262.2.3.8.0.81 - hzIduFan2FailedV1Trap
1.3.6.1.4.1.7262.2.3.8.0.82 - hzIduFan2FailureClearedV1Trap
1.3.6.1.4.1.7262.2.3.8.0.83 - hzIduFan3FailedV1Trap
1.3.6.1.4.1.7262.2.3.8.0.84 - hzIduFan3FailureClearedV1Trap
1.3.6.1.4.1.7262.2.3.8.0.85 - hzIduFan4FailedV1Trap
1.3.6.1.4.1.7262.2.3.8.0.86 - hzIduFan4FailureClearedV1Trap
1.3.6.1.4.1.7262.2.3.8.0.87 - hzIduFaultyPrimaryRadioClearedV1Trap
1.3.6.1.4.1.7262.2.3.8.0.67 - hzIduFaultyPrimaryRadioV1Trap
1.3.6.1.4.1.7262.2.3.8.0.66 - hzIduFrequencyFileInvalidV1Trap
1.3.6.1.4.1.7262.2.3.8.0.13 - hzIduHiPowerRadioDrainM1ClearedV1Trap
1.3.6.1.4.1.7262.2.3.8.0.51 - hzIduHiPowerRadioDrainM1V1Trap
1.3.6.1.4.1.7262.2.3.8.0.50 - hzIduHiPowerRadioDrainM2ClearedV1Trap
1.3.6.1.4.1.7262.2.3.8.0.53 - hzIduHiPowerRadioDrainM2V1Trap
1.3.6.1.4.1.7262.2.3.8.0.52 - hzIduHiPowerRadioTxDetectorClearedV1Trap
1.3.6.1.4.1.7262.2.3.8.0.55 - hzIduHiPowerRadioTxDetectorV1Trap
1.3.6.1.4.1.7262.2.3.8.0.54 - hzIduModemEqualizerStressExceedThresholdClearedV1Trap
1.3.6.1.4.1.7262.2.3.8.0.29 - hzIduModemEqualizerStressExceedThresholdV1Trap
1.3.6.1.4.1.7262.2.3.8.0.28 - hzIduModemHardwareFaultClearedV1Trap
1.3.6.1.4.1.7262.2.3.8.0.33 - hzIduModemHardwareFaultV1Trap
1.3.6.1.4.1.7262.2.3.8.0.32 - hzIduModemProgrammingErrorClearedrV1Trap
1.3.6.1.4.1.7262.2.3.8.0.35 - hzIduModemProgrammingErrorV1Trap
1.3.6.1.4.1.7262.2.3.8.0.34 - hzIduModemRxLossOfSignalLockClearedV1Trap
1.3.6.1.4.1.7262.2.3.8.0.23 - hzIduModemRxLossOfSignalLockV1Trap
1.3.6.1.4.1.7262.2.3.8.0.22 - hzIduModemSnrBelowThresholdClearedV1Trap
1.3.6.1.4.1.7262.2.3.8.0.27 - hzIduModemSnrBelowThresholdV1Trap
1.3.6.1.4.1.7262.2.3.8.0.26 - hzIduModemTxLossOfSyncClearedV1Trap
1.3.6.1.4.1.7262.2.3.8.0.25 - hzIduModemTxLossOfSyncV1Trap
1.3.6.1.4.1.7262.2.3.8.0.24 - hzIduPrimaryRadioNotdetectedClearedV1Trap
1.3.6.1.4.1.7262.2.3.8.0.65 - hzIduPrimaryRadioNotdetectedV1Trap
1.3.6.1.4.1.7262.2.3.8.0.64 - hzIduRadioExcessiveTxCableLossChangeClearedV1Trap
1.3.6.1.4.1.7262.2.3.8.0.69 - hzIduRadioExcessiveTxCableLossChangeV1Trap
1.3.6.1.4.1.7262.2.3.8.0.68 - hzIduRadioExcessiveTxCableLossClearedV1Trap
1.3.6.1.4.1.7262.2.3.8.0.49 - hzIduRadioExcessiveTxCableLossV1Trap
1.3.6.1.4.1.7262.2.3.8.0.48 - hzIduRadioFirmwareMismatchClearedV1Trap
1.3.6.1.4.1.7262.2.3.8.0.61 - hzIduRadioFirmwareMismatchV1Trap
1.3.6.1.4.1.7262.2.3.8.0.60 - hzIduRadioLostCommunicationClearedV1Trap
1.3.6.1.4.1.7262.2.3.8.0.43 - hzIduRadioLostCommunicationV1Trap
1.3.6.1.4.1.7262.2.3.8.0.42 - hzIduRadioMismatchClearedV1Trap
1.3.6.1.4.1.7262.2.3.8.0.45 - hzIduRadioMismatchV1Trap
1.3.6.1.4.1.7262.2.3.8.0.44 - hzIduRadioPLDROLostLockClearedV1Trap
1.3.6.1.4.1.7262.2.3.8.0.41 - hzIduRadioPLDROLostLockV1Trap
1.3.6.1.4.1.7262.2.3.8.0.40 - hzIduRadioPowerAmpClearedV1Trap
1.3.6.1.4.1.7262.2.3.8.0.47 - hzIduRadioPowerAmpV1Trap
1.3.6.1.4.1.7262.2.3.8.0.46 - hzIduRedundancyPrimaryPortFaultyClearedV1Trap
1.3.6.1.4.1.7262.2.3.8.0.77 - hzIduRedundancyPrimaryPortFaultyV1Trap
1.3.6.1.4.1.7262.2.3.8.0.76 - hzIduRedundancyPrimaryPortNotSetClearedV1Trap
1.3.6.1.4.1.7262.2.3.8.0.73 - hzIduRedundancyPrimaryPortNotSetV1Trap
1.3.6.1.4.1.7262.2.3.8.0.72 - hzIduRedundancySecondaryPortFaultyClearedV1Trap
1.3.6.1.4.1.7262.2.3.8.0.79 - hzIduRedundancySecondaryPortFaultyV1Trap
1.3.6.1.4.1.7262.2.3.8.0.78 - hzIduRedundancySecondaryPortIsActiveClearedV1Trap
1.3.6.1.4.1.7262.2.3.8.0.75 - hzIduRedundancySecondaryPortIsActiveV1Trap
1.3.6.1.4.1.7262.2.3.8.0.74 - hzIduRedundancySerialNumberMisMatchClearedV1Trap
1.3.6.1.4.1.7262.2.3.8.0.59 - hzIduRedundancySerialNumberMisMatchV1Trap
1.3.6.1.4.1.7262.2.3.8.0.58 - hzIduRlsQueueBasedShutdownActivatedClearedV1Trap
1.3.6.1.4.1.7262.2.3.8.0.21 - hzIduRlsQueueBasedShutdownActivatedv1Trap
1.3.6.1.4.1.7262.2.3.8.0.20 - hzIduRlsShutdownActivatedClearedV1Trap
1.3.6.1.4.1.7262.2.3.8.0.89 - hzIduRlsShutdownActivatedv1Trap
1.3.6.1.4.1.7262.2.3.8.0.88 - hzIduSecondaryRadioIsActiveClearedV1Trap
1.3.6.1.4.1.7262.2.3.8.0.57 - hzIduSecondaryRadioIsActiveV1Trap
1.3.6.1.4.1.7262.2.3.8.0.56 - hzIduSecondaryRadioNotdetectedClearedV1Trap
1.3.6.1.4.1.7262.2.3.8.0.63 - hzIduSecondaryRadioNotdetectedV1Trap
1.3.6.1.4.1.7262.2.3.8.0.62 - hzIduSntpServersUnreachableClearedV1Trap
1.3.6.1.4.1.7262.2.3.8.0.12 - hzIduSntpServersUnreachableV1Trap
1.3.6.1.4.1.7262.2.3.8.0.11 - hzIduTtySessionCommencedV1Trap
1.3.6.1.4.1.7262.2.3.8.0.36 - hzIduTtySessionTerminatedV1Trap
1.3.6.1.4.1.7262.2.3.8.0.37 - linkDown
1.3.6.1.2.1.11.0.1 - linkUp
1.3.6.1.2.1.11.0.2