EQUIPMENT-MIB
D-Link Systems, Inc.equipments MIB.
snmptranslate -m EQUIPMENT-MIB -Tpsnmpwalk -v2c -c <community> -m EQUIPMENT-MIB <host> 1.3.6.1.4.1.171.12.11Imports
| DLINK-ID-REC-MIB | AgentNotifyLevel, dlink-common-mgmt |
|---|---|
| Q-BRIDGE-MIB | PortList |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
| SNMPv2-SMI | Bits, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso |
| SNMPv2-TC | DateAndTime, DisplayString, PhysAddress, RowStatus, TEXTUAL-CONVENTION, TruthValue |
| TIMERANGE-MIB | swTimeRangeMgmtRangeName |
OID tree
| Name | OID | Type | Access | Status | Example | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| IswEquipmentMIB | 1.3.6.1.4.1.171.12.11 | ||||||||||||||||||||
identity equipments MIB. | |||||||||||||||||||||
| NswEquipment | 1.3.6.1.4.1.171.12.11.1 | ||||||||||||||||||||
| SswEquipmentCapacity | 1.3.6.1.4.1.171.12.11.1.1 | Bits | RO | ||||||||||||||||||
scalar · Bits · read-only · current Indicates the equipment capability supported in the system.
| |||||||||||||||||||||
| SswFanTrapState | 1.3.6.1.4.1.171.12.11.1.4 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current Indicate the fan warning event trap state.
| |||||||||||||||||||||
| SswPowerTrapState | 1.3.6.1.4.1.171.12.11.1.5 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current Indicate the power warning event trap state.
| |||||||||||||||||||||
| TswPowerTable | 1.3.6.1.4.1.171.12.11.1.6 | NA | |||||||||||||||||||
table · not-accessible · current A list of power information values. | |||||||||||||||||||||
| RswPowerEntry | 1.3.6.1.4.1.171.12.11.1.6.1 | NA | |||||||||||||||||||
| CswPowerUnitIndex | 1.3.6.1.4.1.171.12.11.1.6.1.1 | INTEGER (0..65535) | RO | ||||||||||||||||||
column · INTEGER (0..65535) · read-only · current Indicates the unit ID in the System. | |||||||||||||||||||||
| CswPowerID | 1.3.6.1.4.1.171.12.11.1.6.1.2 | INTEGER (0..65535) | RO | ||||||||||||||||||
column · INTEGER (0..65535) · read-only · current Indicates ID of the power 1 : main power 2 : redundant power . | |||||||||||||||||||||
| CswPowerStatus | 1.3.6.1.4.1.171.12.11.1.6.1.3 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Indicates the current power status. lowVoltage : The voltage of the power unit is too low. overCurrent: The current of the power unit is too high. working : The power unit is working normally. fail : The power unit has failed. connect : The power unit is connected but not powered on. disconnect : The power unit is not connected.
| |||||||||||||||||||||
| TswFanTable | 1.3.6.1.4.1.171.12.11.1.7 | NA | |||||||||||||||||||
table · not-accessible · current A list of fan information values. | |||||||||||||||||||||
| RswFanEntry | 1.3.6.1.4.1.171.12.11.1.7.1 | NA | |||||||||||||||||||
| CswFanUnitIndex | 1.3.6.1.4.1.171.12.11.1.7.1.1 | INTEGER (0..65535) | RO | ||||||||||||||||||
column · INTEGER (0..65535) · read-only · current Indicates the unit ID in the System. | |||||||||||||||||||||
| CswFanID | 1.3.6.1.4.1.171.12.11.1.7.1.2 | INTEGER (0..65535) | RO | ||||||||||||||||||
column · INTEGER (0..65535) · read-only · current Indicates the unit ID. | |||||||||||||||||||||
| CswFanStatus | 1.3.6.1.4.1.171.12.11.1.7.1.3 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Indicates the current fan status.
speed-0 : If the fan function is normal and the fan does not spin
due to the temperature not reaching the threshold,
the status of the fan is speed 0.
speed-low : Fan spin using the lowest speed.
speed-middle: Fan spin using the middle speed.
speed-high : Fan spin using the highest speed.
| |||||||||||||||||||||
| CswFanPostion | 1.3.6.1.4.1.171.12.11.1.7.1.4 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Indicates the position of the fan.
| |||||||||||||||||||||
| CswFanNumber | 1.3.6.1.4.1.171.12.11.1.7.1.5 | INTEGER (0..65535) | RO | ||||||||||||||||||
column · INTEGER (0..65535) · read-only · current Indicates the fan number. | |||||||||||||||||||||
| CswFanSpeed | 1.3.6.1.4.1.171.12.11.1.7.1.6 | INTEGER (0..65535) | RO | ||||||||||||||||||
column · INTEGER (0..65535) · read-only · current Indicates the fan work speed(RPM). | |||||||||||||||||||||
| TswTemperatureTable | 1.3.6.1.4.1.171.12.11.1.8 | NA | |||||||||||||||||||
table · not-accessible · current A list of temperature values. | |||||||||||||||||||||
| RswTemperatureEntry | 1.3.6.1.4.1.171.12.11.1.8.1 | NA | |||||||||||||||||||
| CswTemperatureUnitIndex | 1.3.6.1.4.1.171.12.11.1.8.1.1 | INTEGER (0..65535) | RO | 1 | |||||||||||||||||
column · INTEGER (0..65535) · read-only · current Indicates the unit ID in the System. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CswTemperatureCurrent | 1.3.6.1.4.1.171.12.11.1.8.1.2 | INTEGER (-500..500) | RO | 46 | |||||||||||||||||
column · INTEGER (-500..500) · read-only · current The shelf current temperature. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CswTemperatureHighThresh | 1.3.6.1.4.1.171.12.11.1.8.1.3 | INTEGER (-500..500) | RW | 79 | |||||||||||||||||
column · INTEGER (-500..500) · read-write · current The high threshold of shelf temperature. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CswTemperatureLowThresh | 1.3.6.1.4.1.171.12.11.1.8.1.4 | INTEGER (-500..500) | RW | 11 | |||||||||||||||||
column · INTEGER (-500..500) · read-write · current The low threshold of shelf temperature. Example values from LibreNMS test devices
| |||||||||||||||||||||
| NswUnitMgmt | 1.3.6.1.4.1.171.12.11.1.9 | ||||||||||||||||||||
| SswUnitStackingVersion | 1.3.6.1.4.1.171.12.11.1.9.1 | INTEGER (0..65535) | RO | ||||||||||||||||||
scalar · INTEGER (0..65535) · read-only · current This object indicates the version of this stacking system. | |||||||||||||||||||||
| SswUnitMaxSupportedUnits | 1.3.6.1.4.1.171.12.11.1.9.2 | INTEGER (0..65535) | RO | ||||||||||||||||||
scalar · INTEGER (0..65535) · read-only · current The maximum number of units that are supported in the system. | |||||||||||||||||||||
| SswUnitNumOfUnit | 1.3.6.1.4.1.171.12.11.1.9.3 | INTEGER (0..65535) | RO | ||||||||||||||||||
scalar · INTEGER (0..65535) · read-only · current The current number of units. | |||||||||||||||||||||
| TswUnitMgmtTable | 1.3.6.1.4.1.171.12.11.1.9.4 | NA | |||||||||||||||||||
table · not-accessible · current This table contains the unit information. | |||||||||||||||||||||
| RswUnitMgmtEntry | 1.3.6.1.4.1.171.12.11.1.9.4.1 | NA | |||||||||||||||||||
row · not-accessible · current A list of management information for each unit in the system.
| |||||||||||||||||||||
| CswUnitMgmtId | 1.3.6.1.4.1.171.12.11.1.9.4.1.1 | INTEGER (1..13) | RO | ||||||||||||||||||
column · INTEGER (1..13) · read-only · current This object indicates the specific entry in the stacking/chassis table. | |||||||||||||||||||||
| CswUnitMgmtMacAddr | 1.3.6.1.4.1.171.12.11.1.9.4.1.2 | MacAddress | RO | ||||||||||||||||||
column · MacAddress · read-only · current The MAC address of this unit. | |||||||||||||||||||||
| CswUnitMgmtStartPort | 1.3.6.1.4.1.171.12.11.1.9.4.1.3 | INTEGER (1..65535) | RO | ||||||||||||||||||
column · INTEGER (1..65535) · read-only · current This object indicates the starting port of this unit. | |||||||||||||||||||||
| CswUnitMgmtPortRange | 1.3.6.1.4.1.171.12.11.1.9.4.1.4 | INTEGER (0..65535) | RO | ||||||||||||||||||
column · INTEGER (0..65535) · read-only · current This object indicates the total ports of this unit. | |||||||||||||||||||||
| CswUnitMgmtFrontPanelLedStatus | 1.3.6.1.4.1.171.12.11.1.9.4.1.5 | OCTET STRING (SIZE (0..255)) | RO | ||||||||||||||||||
column · OCTET STRING (SIZE (0..255)) · read-only · current This object is a set of system LED indicators. The first four
octets are defined as a system LED. The first LED is a power LED.
The second LED in the stacking module is a master LED but in the chassis is
a status LED. The third LED is a console LED. The fourth LED is
an RPS (Redundancy Power Supply) LED. The other octets are the
logical port LED (following dot1dBasePort ordering). Every two
bytes are presented to a port. The first byte is presented as the
link/activity LED. The second byte is presented as the speed LED.
system LED:
01 = fail/error/non existence.
02 = work normal.
link/activity LED :
The most significant bit is used for blinking/solid:
8 = The LED blinks.
The second most significant bit is used for link status:
1 = link fail.
2 = link pass.
speed LED :
01 = 10Mbps.
02 = 100Mbps.
03 = 1000Mbps.
The four remaining bits are currently unused and must be set to 0.
Note:
For the DGS-3700, the first five octets are defined as the system LED.
The first LED is the power LED. The second LED is the console LED.
The third LED is the RPS (Redundancy Power Supply) LED. The fourth
LED is the management port LED. The fifth LED is the fan LED.
For the DGS-3200-10 and DGS-3200-16, the first three octets are defined
as the system LED. The first LED is the power LED. The second LED is the console LED.
The third LED is the RPS (Redundancy Power Supply) LED.
For the DGS-3200-24, the first three octets are defined as the system LED,
the definition of the first three octets is the same as the DGS-3200-10 and DGS-3200-16,
the fourth LED is the SD card LED. The following description is for the SD card LED:
01 = SD card is not present.
02 = SD card is present.
03 = fails to read/write SD card.
04 = read/write SD card successfully. | |||||||||||||||||||||
| CswUnitMgmtCtrlMode | 1.3.6.1.4.1.171.12.11.1.9.4.1.6 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current This object indicates the stacking mode the user configured for
the unit. This object can only be configured when the device is
in standalone mode.
other (1) - This object indicates the stacking mode that the user
has configured for the unit. This object can only be configured
when the device is in standalone mode.
auto (2) - The system will auto-assign a stacking role to this
unit to be: standalone(3), master(4), or slave(5).
standalone (3) - The unit is forced to be in standalone mode.
master (4) - The unit is forced to be in master mode. If this unit is
selected to be a master, the unit can modify the configuration of the stacking system.
slave (5) - The unit is forced to be in slave mode. If this unit is
selected to be a slave, it can only view the configuration of
the stacking system.
| |||||||||||||||||||||
| CswUnitMgmtCurrentMode | 1.3.6.1.4.1.171.12.11.1.9.4.1.7 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current The current stacking role of this unit.
| |||||||||||||||||||||
| CswUnitMgmtVersion | 1.3.6.1.4.1.171.12.11.1.9.4.1.8 | DisplayString (SIZE (0..32)) | RO | ||||||||||||||||||
column · DisplayString (SIZE (0..32)) · read-only · current This object indicates the version of this stacking unit. | |||||||||||||||||||||
| CswUnitMgmtModuleName | 1.3.6.1.4.1.171.12.11.1.9.4.1.9 | DisplayString (SIZE (0..32)) | RO | ||||||||||||||||||
column · DisplayString (SIZE (0..32)) · read-only · current A textual string containing the stacking unit module name. | |||||||||||||||||||||
| CswUnitMgmtPromVersion | 1.3.6.1.4.1.171.12.11.1.9.4.1.10 | DisplayString (SIZE (0..255)) | RO | ||||||||||||||||||
column · DisplayString (SIZE (0..255)) · read-only · current A textual string containing the PROM version of the stacking unit. | |||||||||||||||||||||
| CswUnitMgmtFirmwareVersion | 1.3.6.1.4.1.171.12.11.1.9.4.1.11 | DisplayString (SIZE (0..255)) | RO | ||||||||||||||||||
column · DisplayString (SIZE (0..255)) · read-only · current A textual string containing the firmware version of the stacking unit. | |||||||||||||||||||||
| CswUnitMgmtHardwareVersion | 1.3.6.1.4.1.171.12.11.1.9.4.1.12 | DisplayString (SIZE (0..255)) | RO | ||||||||||||||||||
column · DisplayString (SIZE (0..255)) · read-only · current A textual string containing the hardware version of the stacking unit. | |||||||||||||||||||||
| CswUnitMgmtPriority | 1.3.6.1.4.1.171.12.11.1.9.4.1.13 | INTEGER (1..63) | RW | ||||||||||||||||||
column · INTEGER (1..63) · read-write · current The Priority of the stacking unit. | |||||||||||||||||||||
| CswUnitMgmtUserSetState | 1.3.6.1.4.1.171.12.11.1.9.4.1.14 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current This object indicates the user set state of this unit.
| |||||||||||||||||||||
| CswUnitMgmtExistState | 1.3.6.1.4.1.171.12.11.1.9.4.1.15 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current The state of existence of this unit.
| |||||||||||||||||||||
| CswUnitMgmtBoxId | 1.3.6.1.4.1.171.12.11.1.9.4.1.16 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current The box ID of the stacking unit. When show, it shows the current box ID of this unit; When set, it sets the new box ID, and the new box ID will take effect after the next boot.
| |||||||||||||||||||||
| CswUnitMgmtSerialNumber | 1.3.6.1.4.1.171.12.11.1.9.4.1.17 | DisplayString | RO | P1UM298000677 | |||||||||||||||||
column · DisplayString · read-only · current A text string containing the serial number of the stacking unit. Example values from LibreNMS test devices
| |||||||||||||||||||||
| SswUnitTopology | 1.3.6.1.4.1.171.12.11.1.9.5 | INTEGER | RO | ||||||||||||||||||
scalar · INTEGER · read-only · current The stacking topology state.
| |||||||||||||||||||||
| SswUnitStackMode | 1.3.6.1.4.1.171.12.11.1.9.6 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current Indicates the stacking mode supported in the system.
| |||||||||||||||||||||
| SswUnitStackForceMasterRole | 1.3.6.1.4.1.171.12.11.1.9.7 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current Indicates the stack force master role mode supported in the system.
| |||||||||||||||||||||
| SswUnitStackTrapState | 1.3.6.1.4.1.171.12.11.1.9.8 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current Indicates the stacking trap state.
| |||||||||||||||||||||
| SswUnitStackLogState | 1.3.6.1.4.1.171.12.11.1.9.9 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current Indicates the stacking log state.
| |||||||||||||||||||||
| TswExternalAlarmTable | 1.3.6.1.4.1.171.12.11.1.10 | NA | |||||||||||||||||||
table · not-accessible · current A list of the status of each of the alarm channels by this agent. | |||||||||||||||||||||
| RswExternalAlarmEntry | 1.3.6.1.4.1.171.12.11.1.10.1 | NA | |||||||||||||||||||
row · not-accessible · current An entry containing objects with the status of each alarm channel. | |||||||||||||||||||||
| CswExternalAlarmChannel | 1.3.6.1.4.1.171.12.11.1.10.1.1 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current The number of the alarm channel. | |||||||||||||||||||||
| CswExternalAlarmMessage | 1.3.6.1.4.1.171.12.11.1.10.1.2 | DisplayString (SIZE (0..128)) | RW | ||||||||||||||||||
column · DisplayString (SIZE (0..128)) · read-write · current Used to configure the alarm message when an alarm occurs on this channel. If no alarm message is configured on this channel, a default alarm message will be generated. | |||||||||||||||||||||
| CswExternalAlarmStatus | 1.3.6.1.4.1.171.12.11.1.10.1.3 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Shows the current status of each alarm channel.
| |||||||||||||||||||||
| NswEquipmentPowerSaving | 1.3.6.1.4.1.171.12.11.1.11 | ||||||||||||||||||||
| SswEquipPowerSavingLinkDetectState | 1.3.6.1.4.1.171.12.11.1.11.1 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current Indicates the equipment reduced power consumption state.
| |||||||||||||||||||||
| SswEquipPowerSavingLenDetect | 1.3.6.1.4.1.171.12.11.1.11.2 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current Indicates the equipment reduced power consumption state with a link partner.
| |||||||||||||||||||||
| SswEquipPowerSavingHiberState | 1.3.6.1.4.1.171.12.11.1.11.3 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current This object indicates the power saving state of system hibernation.
| |||||||||||||||||||||
| SswEquipPowerSavingPortLEDState | 1.3.6.1.4.1.171.12.11.1.11.4 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current This object indicates the power saving state of port LED.
| |||||||||||||||||||||
| SswEquipPowerSavingPortState | 1.3.6.1.4.1.171.12.11.1.11.5 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current This object indicates the power saving state of port.
| |||||||||||||||||||||
| NswEquipPowerSavingScheduleCtrl | 1.3.6.1.4.1.171.12.11.1.11.6 | ||||||||||||||||||||
| TswEquipPowerSavingHibernationTable | 1.3.6.1.4.1.171.12.11.1.11.6.1 | NA | |||||||||||||||||||
table · not-accessible · current A list of the system hibernation configurations of the power saving. | |||||||||||||||||||||
| RswEquipPowerSavingHibernationEntry | 1.3.6.1.4.1.171.12.11.1.11.6.1.1 | NA | |||||||||||||||||||
row · not-accessible · current An entry containing the system hibernation configurations of the power saving. | |||||||||||||||||||||
| CswEquipPowerSavingHiberRowStatus | 1.3.6.1.4.1.171.12.11.1.11.6.1.1.100 | RowStatus | RC | ||||||||||||||||||
column · RowStatus · read-create · current This object indicates the status of this entry. | |||||||||||||||||||||
| TswEquipPowerSavingPortLedTable | 1.3.6.1.4.1.171.12.11.1.11.6.2 | NA | |||||||||||||||||||
table · not-accessible · current A list of the port LED configurations of the power saving. | |||||||||||||||||||||
| RswEquipPowerSavingPortLedEntry | 1.3.6.1.4.1.171.12.11.1.11.6.2.1 | NA | |||||||||||||||||||
row · not-accessible · current An entry containing the port LED configurations of the power saving. | |||||||||||||||||||||
| CswEquipPowerSavingPortLedRowStatus | 1.3.6.1.4.1.171.12.11.1.11.6.2.1.100 | RowStatus | RC | ||||||||||||||||||
column · RowStatus · read-create · current This object indicates the status of this entry. | |||||||||||||||||||||
| TswEquipPowerSavingPortTable | 1.3.6.1.4.1.171.12.11.1.11.6.3 | NA | |||||||||||||||||||
table · not-accessible · current A list of the port configurations of the power saving. | |||||||||||||||||||||
| RswEquipPowerSavingPortEntry | 1.3.6.1.4.1.171.12.11.1.11.6.3.1 | NA | |||||||||||||||||||
row · not-accessible · current An entry containing the port configurations of the power saving. | |||||||||||||||||||||
| CswEquipPowerSavingPortIndex | 1.3.6.1.4.1.171.12.11.1.11.6.3.1.1 | INTEGER | NA | ||||||||||||||||||
column · INTEGER · not-accessible · current Indicates the module's port number.(1..Max port number in the module). | |||||||||||||||||||||
| CswEquipPowerSavingPortRowStatus | 1.3.6.1.4.1.171.12.11.1.11.6.3.1.100 | RowStatus | RC | ||||||||||||||||||
column · RowStatus · read-create · current This object indicates the status of this entry. | |||||||||||||||||||||
| NswEquipEeeMgmt | 1.3.6.1.4.1.171.12.11.1.11.20 | ||||||||||||||||||||
| SswEquipEeeState | 1.3.6.1.4.1.171.12.11.1.11.20.1 | PortList | RW | ||||||||||||||||||
scalar · PortList · read-write · current This object indicates the EEE state of all ports. Note: If the port's bit has a value of '1', specifies the EEE (Energy Efficient Ethernet) state of this port is 'Enabled', otherwise, if the port's bit has a value of '0', specifies the EEE state of this port is 'Disabled'. | |||||||||||||||||||||
| NswEquipmentTemperatureCtrl | 1.3.6.1.4.1.171.12.11.1.12 | ||||||||||||||||||||
| SswTemperatureTrapState | 1.3.6.1.4.1.171.12.11.1.12.1 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current This object can enable or disable the warning temperature trap.
| |||||||||||||||||||||
| SswTemperatureLogState | 1.3.6.1.4.1.171.12.11.1.12.2 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current This object can enable or disable the warning temperature log.
| |||||||||||||||||||||
| NswEquipmentLEDCtrl | 1.3.6.1.4.1.171.12.11.1.13 | ||||||||||||||||||||
| SswEquipmentPortLEDState | 1.3.6.1.4.1.171.12.11.1.13.1 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current This object indicates the LED admin state of all ports.
| |||||||||||||||||||||
| TswExternalAlarmStackingTable | 1.3.6.1.4.1.171.12.11.1.15 | NA | |||||||||||||||||||
table · not-accessible · current A list of the status of each of the alarm channels by this agent. | |||||||||||||||||||||
| RswExternalAlarmStackingEntry | 1.3.6.1.4.1.171.12.11.1.15.1 | NA | |||||||||||||||||||
row · not-accessible · current An entry containing objects with the status of each alarm channel. | |||||||||||||||||||||
| CswExternalAlarmStackingUnitIndex | 1.3.6.1.4.1.171.12.11.1.15.1.1 | INTEGER | NA | ||||||||||||||||||
column · INTEGER · not-accessible · current Indicates the unit ID in the System.. | |||||||||||||||||||||
| CswExternalAlarmStackingChannel | 1.3.6.1.4.1.171.12.11.1.15.1.2 | INTEGER | NA | ||||||||||||||||||
column · INTEGER · not-accessible · current The number of the alarm channel. | |||||||||||||||||||||
| CswExternalAlarmStackingMessage | 1.3.6.1.4.1.171.12.11.1.15.1.3 | DisplayString (SIZE (0..128)) | RW | ||||||||||||||||||
column · DisplayString (SIZE (0..128)) · read-write · current Used to configure the alarm message when an alarm occurs on this channel. If no alarm message is configured on this channel, a default alarm message will be generated. | |||||||||||||||||||||
| CswExternalAlarmStackingStatus | 1.3.6.1.4.1.171.12.11.1.15.1.4 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Shows the current status of each alarm channel.
| |||||||||||||||||||||
| NswEquipmentNotify | 1.3.6.1.4.1.171.12.11.2 | ||||||||||||||||||||
| NswEquipmentNotifyMgmt | 1.3.6.1.4.1.171.12.11.2.1 | ||||||||||||||||||||
| NswEquipUnitNotifyMgmt | 1.3.6.1.4.1.171.12.11.2.1.1 | ||||||||||||||||||||
| SswUnitInsertSeverity | 1.3.6.1.4.1.171.12.11.2.1.1.1 | AgentNotifyLevel | RW | ||||||||||||||||||
scalar · AgentNotifyLevel · read-write · current Indicates the swUnitInsert detection level. | |||||||||||||||||||||
| SswUnitRemoveSeverity | 1.3.6.1.4.1.171.12.11.2.1.1.2 | AgentNotifyLevel | RW | ||||||||||||||||||
scalar · AgentNotifyLevel · read-write · current Indicates the swUnitRemove detection level. | |||||||||||||||||||||
| SswUnitFailureSeverity | 1.3.6.1.4.1.171.12.11.2.1.1.3 | AgentNotifyLevel | RW | ||||||||||||||||||
scalar · AgentNotifyLevel · read-write · current Indicates the swUnitFailure detection level. | |||||||||||||||||||||
| NswEquipPowerNotifyMgmt | 1.3.6.1.4.1.171.12.11.2.1.2 | ||||||||||||||||||||
| SswPowerStatusChgSeverity | 1.3.6.1.4.1.171.12.11.2.1.2.1 | AgentNotifyLevel | RW | ||||||||||||||||||
scalar · AgentNotifyLevel · read-write · current Indicates the swPowerStatusChg detection level. | |||||||||||||||||||||
| SswPowerFailureSeverity | 1.3.6.1.4.1.171.12.11.2.1.2.2 | AgentNotifyLevel | RW | ||||||||||||||||||
scalar · AgentNotifyLevel · read-write · current Indicates the swPowerFailure detection level. | |||||||||||||||||||||
| SswPowerRecoverSeverity | 1.3.6.1.4.1.171.12.11.2.1.2.3 | AgentNotifyLevel | RW | ||||||||||||||||||
scalar · AgentNotifyLevel · read-write · current Indicates the swPowerRecover detection level. | |||||||||||||||||||||
| NswEquipFanNotifyMgmt | 1.3.6.1.4.1.171.12.11.2.1.3 | ||||||||||||||||||||
| SswFanFailureSeverity | 1.3.6.1.4.1.171.12.11.2.1.3.1 | AgentNotifyLevel | RW | ||||||||||||||||||
scalar · AgentNotifyLevel · read-write · current Indicates the swFanFailure detection level. | |||||||||||||||||||||
| SswFanRecoverSeverity | 1.3.6.1.4.1.171.12.11.2.1.3.2 | AgentNotifyLevel | RW | ||||||||||||||||||
scalar · AgentNotifyLevel · read-write · current Indicates the swFanRecover detection level. | |||||||||||||||||||||
| NswEquipTemperatureNotifyMgmt | 1.3.6.1.4.1.171.12.11.2.1.4 | ||||||||||||||||||||
| SswHighTemperatureSeverity | 1.3.6.1.4.1.171.12.11.2.1.4.1 | AgentNotifyLevel | RW | ||||||||||||||||||
scalar · AgentNotifyLevel · read-write · current Indicates the swHighTemperature detection level. | |||||||||||||||||||||
| SswHighTemperatureRecoverSeverity | 1.3.6.1.4.1.171.12.11.2.1.4.2 | AgentNotifyLevel | RW | ||||||||||||||||||
scalar · AgentNotifyLevel · read-write · current Indicates the swHighTemperatureRecover detection level. | |||||||||||||||||||||
| SswLowTemperatureSeverity | 1.3.6.1.4.1.171.12.11.2.1.4.3 | AgentNotifyLevel | RW | ||||||||||||||||||
scalar · AgentNotifyLevel · read-write · current Indicates the swLowTemperature detection level. | |||||||||||||||||||||
| SswLowTemperatureRecoverSeverity | 1.3.6.1.4.1.171.12.11.2.1.4.4 | AgentNotifyLevel | RW | ||||||||||||||||||
scalar · AgentNotifyLevel · read-write · current Indicates the swLowTemperatureRecover detection level. | |||||||||||||||||||||
| NswEquipmentNotification | 1.3.6.1.4.1.171.12.11.2.2 | ||||||||||||||||||||
| NswEquipUnitNotification | 1.3.6.1.4.1.171.12.11.2.2.1 | ||||||||||||||||||||
| NswEquipUnitNotifyPrefix | 1.3.6.1.4.1.171.12.11.2.2.1.0 | ||||||||||||||||||||
| !swUnitInsert | 1.3.6.1.4.1.171.12.11.2.2.1.0.1 | ||||||||||||||||||||
| !swUnitRemove | 1.3.6.1.4.1.171.12.11.2.2.1.0.2 | ||||||||||||||||||||
| !swUnitFailure | 1.3.6.1.4.1.171.12.11.2.2.1.0.3 | ||||||||||||||||||||
| !swUnitTPChange | 1.3.6.1.4.1.171.12.11.2.2.1.0.4 | ||||||||||||||||||||
notification · current The stacking topology change notification. | |||||||||||||||||||||
| !swUnitRoleChange | 1.3.6.1.4.1.171.12.11.2.2.1.0.5 | ||||||||||||||||||||
notification · current The stacking unit role change notification.
| |||||||||||||||||||||
| NswEquipPowerNotification | 1.3.6.1.4.1.171.12.11.2.2.2 | ||||||||||||||||||||
| NswEquipPowerNotifyPerfix | 1.3.6.1.4.1.171.12.11.2.2.2.0 | ||||||||||||||||||||
| !swPowerStatusChg | 1.3.6.1.4.1.171.12.11.2.2.2.0.1 | ||||||||||||||||||||
notification · current Power Status change notification. The notification is issued when the swPowerStatus changes in the following cases: lowVoltage -> overCurrent. lowVoltage -> working. lowVoltage -> disconnect. lowVoltage -> connect. overCurrent -> lowVoltage. overCurrent -> working. overCurrent -> disconnect. overCurrent -> connect. working -> lowVoltage. working -> overCurrent. working -> connect. working -> disconnect. fail -> connect. fail -> disconnect. connect -> lowVoltage. connect -> overCurrent. connect -> working. connect -> disconnect. disconnect -> lowVoltage. disconnect -> overCurrent. disconnect -> working. disconnect -> connect.
| |||||||||||||||||||||
| !swPowerFailure | 1.3.6.1.4.1.171.12.11.2.2.2.0.2 | ||||||||||||||||||||
notification · current Power Failure notification. The notification is issued
when the swPowerStatus changes in the following cases:
lowVoltage -> fail.
overCurrent -> fail.
working -> fail.
connect -> fail.
disconnect -> fail.
| |||||||||||||||||||||
| !swPowerRecover | 1.3.6.1.4.1.171.12.11.2.2.2.0.3 | ||||||||||||||||||||
notification · current Power Recover notification. The notification is issued when the swPowerStatus changes in the following cases: fail -> lowVoltage. fail -> overCurrent. fail -> working.
| |||||||||||||||||||||
| NswEquipFanNotification | 1.3.6.1.4.1.171.12.11.2.2.3 | ||||||||||||||||||||
| NswEquipFanNotifyPrefix | 1.3.6.1.4.1.171.12.11.2.2.3.0 | ||||||||||||||||||||
| !swFanFailure | 1.3.6.1.4.1.171.12.11.2.2.3.0.1 | ||||||||||||||||||||
| !swFanRecover | 1.3.6.1.4.1.171.12.11.2.2.3.0.2 | ||||||||||||||||||||
| NswEquipTemperatureNotification | 1.3.6.1.4.1.171.12.11.2.2.4 | ||||||||||||||||||||
| NswEquipTemperatureNotifyPrefix | 1.3.6.1.4.1.171.12.11.2.2.4.0 | ||||||||||||||||||||
| !swHighTemperature | 1.3.6.1.4.1.171.12.11.2.2.4.0.1 | ||||||||||||||||||||
notification · current High Temperature notification. | |||||||||||||||||||||
| !swHighTemperatureRecover | 1.3.6.1.4.1.171.12.11.2.2.4.0.2 | ||||||||||||||||||||
notification · current High Temperature notification. | |||||||||||||||||||||
| !swLowTemperature | 1.3.6.1.4.1.171.12.11.2.2.4.0.3 | ||||||||||||||||||||
notification · current Low Temperature notification. | |||||||||||||||||||||
| !swLowTemperatureRecover | 1.3.6.1.4.1.171.12.11.2.2.4.0.4 | ||||||||||||||||||||
notification · current Low Temperature notification. | |||||||||||||||||||||
| NswEquipExternalAlarmNotification | 1.3.6.1.4.1.171.12.11.2.2.5 | ||||||||||||||||||||
| NswEquipExternalAlarmNotifyPrefix | 1.3.6.1.4.1.171.12.11.2.2.5.0 | ||||||||||||||||||||
| !swExternalAlarm | 1.3.6.1.4.1.171.12.11.2.2.5.0.1 | ||||||||||||||||||||
notification · current The notice of an Alarm in the specified channel. | |||||||||||||||||||||
| !swExternalAlarmStacking | 1.3.6.1.4.1.171.12.11.2.2.5.0.2 | ||||||||||||||||||||
notification · current The notice of an Alarm in the specified channel. | |||||||||||||||||||||
| NswNotificationBindings | 1.3.6.1.4.1.171.12.11.2.3 | ||||||||||||||||||||
| NswEquipTemperNotifyBindings | 1.3.6.1.4.1.171.12.11.2.3.1 | ||||||||||||||||||||
| SswTemperSensorID | 1.3.6.1.4.1.171.12.11.2.3.1.1 | INTEGER | AN | ||||||||||||||||||
scalar · INTEGER · accessible-for-notify · current This object indicates the ID of the temperature sensor in the unit. | |||||||||||||||||||||
| NswEquipUnitNotifyBindings | 1.3.6.1.4.1.171.12.11.2.3.2 | ||||||||||||||||||||
| SswStackTopologyType | 1.3.6.1.4.1.171.12.11.2.3.2.1 | INTEGER | AN | ||||||||||||||||||
scalar · INTEGER · accessible-for-notify · current This object indicates the MAC address of the switch.
| |||||||||||||||||||||
| SswStackRoleChangeType | 1.3.6.1.4.1.171.12.11.2.3.2.2 | INTEGER | AN | ||||||||||||||||||
scalar · INTEGER · accessible-for-notify · current This object indicates the role information of the switch.
| |||||||||||||||||||||
Traps / Notifications
- swExternalAlarm
1.3.6.1.4.1.171.12.11.2.2.5.0.1 - swExternalAlarmStacking
1.3.6.1.4.1.171.12.11.2.2.5.0.2 - swFanFailure
1.3.6.1.4.1.171.12.11.2.2.3.0.1 - swFanRecover
1.3.6.1.4.1.171.12.11.2.2.3.0.2 - swHighTemperature
1.3.6.1.4.1.171.12.11.2.2.4.0.1 - swHighTemperatureRecover
1.3.6.1.4.1.171.12.11.2.2.4.0.2 - swLowTemperature
1.3.6.1.4.1.171.12.11.2.2.4.0.3 - swLowTemperatureRecover
1.3.6.1.4.1.171.12.11.2.2.4.0.4 - swPowerFailure
1.3.6.1.4.1.171.12.11.2.2.2.0.2 - swPowerRecover
1.3.6.1.4.1.171.12.11.2.2.2.0.3 - swPowerStatusChg
1.3.6.1.4.1.171.12.11.2.2.2.0.1 - swUnitFailure
1.3.6.1.4.1.171.12.11.2.2.1.0.3 - swUnitInsert
1.3.6.1.4.1.171.12.11.2.2.1.0.1 - swUnitRemove
1.3.6.1.4.1.171.12.11.2.2.1.0.2 - swUnitRoleChange
1.3.6.1.4.1.171.12.11.2.2.1.0.5 - swUnitTPChange
1.3.6.1.4.1.171.12.11.2.2.1.0.4