DLINKSW-TIME-MIB
D-Link Systems, Inc.This MIB module defines objects for Time and Simple Network Time Protocol (SNTP).
snmptranslate -m DLINKSW-TIME-MIB -Tpsnmpwalk -v2c -c <community> -m DLINKSW-TIME-MIB <host> 1.3.6.1.4.1.171.14.10Imports
| DLINK-ID-REC-MIB | dlinkIndustrialCommon |
|---|---|
| IF-MIB | InterfaceIndexOrZero |
| INET-ADDRESS-MIB | InetAddress, InetAddressType |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | Bits, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso |
| SNMPv2-TC | DateAndTime, DisplayString, PhysAddress, RowStatus, TEXTUAL-CONVENTION, TruthValue |
OID tree
| Name | OID | Type | Access | Status |
|---|---|---|---|---|
| IdlinkSwTimeMIB | 1.3.6.1.4.1.171.14.10 | |||
identity This MIB module defines objects for Time and Simple Network Time Protocol (SNTP). | ||||
| NdTimeMIBNotifications | 1.3.6.1.4.1.171.14.10.0 | |||
| NdTimeMIBObjects | 1.3.6.1.4.1.171.14.10.1 | |||
| NdTimeGeneral | 1.3.6.1.4.1.171.14.10.1.1 | |||
| SdTimeSntpEnabled | 1.3.6.1.4.1.171.14.10.1.1.1 | TruthValue | RW | |
scalar · TruthValue · read-write · current This object indicates the state of SNTP function. Setting this object to 'true' will enable SNTP function. | ||||
| SdTimeSntpBcastClientEnabled | 1.3.6.1.4.1.171.14.10.1.1.2 | TruthValue | RW | |
scalar · TruthValue · read-write · current This object is used to enable/disable the broadcast client mode. Setting this object to 'true' indicates that the agent accepts broadcast SNTP traffic from servers. | ||||
| SdTimeSntpPollInterval | 1.3.6.1.4.1.171.14.10.1.1.3 | Unsigned32 (30..99999) | RW | |
scalar · Unsigned32 (30..99999) · read-write · current This object indicates the interval for the SNTP client to synchronize its clock with server. | ||||
| SdTimeSntpSourceIfIndex | 1.3.6.1.4.1.171.14.10.1.1.4 | InterfaceIndexOrZero | RW | |
scalar · InterfaceIndexOrZero · read-write · current This object indicates the ifIndex of the interface whose IP address will be used as the source address for sending the SNTP packet. A special value of 0 indicates the source interface is not specified and the IP address of the closest interface will be used. | ||||
| NdTimeClock | 1.3.6.1.4.1.171.14.10.1.2 | |||
| SdTimeManagedClock | 1.3.6.1.4.1.171.14.10.1.2.1 | DateAndTime | RW | |
scalar · DateAndTime · read-write · current Use the object to manually set the system clock. | ||||
| SdTimeCurrentTimeSource | 1.3.6.1.4.1.171.14.10.1.2.2 | INTEGER | RO | |
scalar · INTEGER · read-only · current The object indicates the clock source.
| ||||
| SdTimeCurrentTime | 1.3.6.1.4.1.171.14.10.1.2.3 | DateAndTime | RO | |
scalar · DateAndTime · read-only · current This object indicates the current system time. System time can be disciplined or adjusted by RTC, SNTP, or configured by user. | ||||
| NdTimeSummerTime | 1.3.6.1.4.1.171.14.10.1.2.5 | |||
| SdTimeSummerTimeAutoSwitchMode | 1.3.6.1.4.1.171.14.10.1.2.5.1 | INTEGER | RW | |
scalar · INTEGER · read-write · current This object indicates the mode of the system to automatically
switch to Summer Time (Daylight Saving Time).
disable(1) - The Daylight Saving Time feature is disabled.
recurring(2) - The Daylight Saving Time feature is enabled.
The Summer Time should start and end on the specified
week day of the specified month.
date(3) - The Daylight Saving Time feature is enabled.
The Summer Time should start and end on the specified date
of the specified month.
| ||||
| SdTimeSummerTimeStart | 1.3.6.1.4.1.171.14.10.1.2.5.2 | DlinkTimeSummerTimeValue | RW | |
scalar · DlinkTimeSummerTimeValue · read-write · current This object indicates when the Summer Time starts. This value is always interpreted within the context of a dTimeSummerTimeAutoSwitchMode value. | ||||
| SdTimeSummerTimeEnd | 1.3.6.1.4.1.171.14.10.1.2.5.3 | DlinkTimeSummerTimeValue | RW | |
scalar · DlinkTimeSummerTimeValue · read-write · current This object indicates when the Summer Time ends. This value is always interpreted within the context of a dTimeSummerTimeAutoSwitchMode value. | ||||
| SdTimeSummerTimeOffset | 1.3.6.1.4.1.171.14.10.1.2.5.4 | INTEGER (30 | 60 | 90 | 120) | RW | |
scalar · INTEGER (30 | 60 | 90 | 120) · read-write · current The value of this object indicates number of minutes to add or to subtract during Summer Time. This object is not meaningful when dTimeSummerTimeAutoSwitchMode object is 'disable'.
| ||||
| NdTimeServer | 1.3.6.1.4.1.171.14.10.1.3 | |||
| SdTimeSntpServerTableNum | 1.3.6.1.4.1.171.14.10.1.3.1 | Unsigned32 | RO | |
scalar · Unsigned32 · read-only · current This object indicates the number of entries present in the dTimeSntpServerTable. | ||||
| TdTimeSntpServerTable | 1.3.6.1.4.1.171.14.10.1.3.2 | NA | ||
table · not-accessible · current This table consists of a list of information for SNTP Time servers, which allow the software clock to be synchronized. | ||||
| RdTimeSntpServerEntry | 1.3.6.1.4.1.171.14.10.1.3.2.1 | NA | ||
row · not-accessible · current An entry contains information about an SNTP Time server. | ||||
| CdTimeSntpServerAddrType | 1.3.6.1.4.1.171.14.10.1.3.2.1.1 | InetAddressType | NA | |
column · InetAddressType · not-accessible · current This object indicates the address type of the SNTP server. | ||||
| CdTimeSntpServerAddr | 1.3.6.1.4.1.171.14.10.1.3.2.1.2 | InetAddress | NA | |
column · InetAddress · not-accessible · current IP or IPv6 address of the time server which provides the clock synchronization. | ||||
| CdTimeSntpServerVrfName | 1.3.6.1.4.1.171.14.10.1.3.2.1.3 | DisplayString | NA | |
column · DisplayString · not-accessible · current This object indicates the name of the routing forwarding instance.
A zero length string indicates the VRF name is not specified.
For the platform that doesn't support VRF, only a zero length string
is allowed for this object. | ||||
| CdTimeSntpServerRowStatus | 1.3.6.1.4.1.171.14.10.1.3.2.1.4 | RowStatus | RC | |
column · RowStatus · read-create · current The status of this entry. | ||||
| CdTimeSntpServerVersion | 1.3.6.1.4.1.171.14.10.1.3.2.1.5 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current This object indicates the SNTP server version. When the value of dTimeSntpServerRowStatus at the same row is notInService(2), this object is 0. | ||||
| CdTimeSntpServerLastReceive | 1.3.6.1.4.1.171.14.10.1.3.2.1.6 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current This object indicates the elapsed time that the SNTP time has been synchronized.
| ||||
| CdTimeSntpServerSynced | 1.3.6.1.4.1.171.14.10.1.3.2.1.7 | TruthValue | RO | |
column · TruthValue · read-only · current This object indicates whether the corresponding server is the current synced server. | ||||
| CdTimeSntpServerBcast | 1.3.6.1.4.1.171.14.10.1.3.2.1.8 | TruthValue | RO | |
column · TruthValue · read-only · current This object indicates whether the server is a broadcast SNTP server. | ||||
| NdTimeMIBConformance | 1.3.6.1.4.1.171.14.10.2 | |||
| NdTimeCompliances | 1.3.6.1.4.1.171.14.10.2.1 | |||
| MdTimeCompliance | 1.3.6.1.4.1.171.14.10.2.1.1 | |||
compliance · current The compliance statement for entities which implement the DLINKSW-TIME-MIB. | ||||
| NdTimeGroups | 1.3.6.1.4.1.171.14.10.2.2 | |||
| GdTimeSysInfoGroup | 1.3.6.1.4.1.171.14.10.2.2.1 | |||
group · current A collection of objects provides the information for system time. | ||||
| GdTimeClockGroup | 1.3.6.1.4.1.171.14.10.2.2.2 | |||
group · current A collection of objects provides configuration for system time.
| ||||
| GdTimeSntpGroup | 1.3.6.1.4.1.171.14.10.2.2.3 | |||
group · current A collection of objects provides configuration for SNTP. | ||||
| GdTimeSummerTimeCfgGroup | 1.3.6.1.4.1.171.14.10.2.2.4 | |||
group · current A collection of objects provides configuration for Daylight Saving Time feature. | ||||
Textual conventions
DlinkTimeSummerTimeValueOCTET STRING (SIZE (0 | 5 | 6))Denotes Summer Time starts or ends time. This value is always interpreted within the context of a dTimeSummerTimeAutoSwitchMode value. When dTimeSummerTimeAutoSwitchMode is disable(1), this value is not meaningful. When dTimeSummerTimeAutoSwitchMode is recurring(2), the format is defined as follows: octets contents range ------ -------- ------- 1 week 1..4, ff last = ff 2 day 1..7 where Sunday = 1 Saturday = 7 3 month 1..12 where January = 1 December = 12 4 hour 0..23 5 minute 0..59 For example, the first Feb at 13:30pm should be given as 01 02 0d 1e For the last Tuesday in December at 1:20am should be given as ff 03 0c 01 14 When dTimeSummerTimeAutoSwitchMode is date(3), the format is defined as follows: octets contents range ------ -------- ------- 1-2 year 0..65536 in network-byte order 3 month 1..12 where January = 1 December = 12 4 date 1..31, 5 hour 0..23 6 minute 0..59 For example, the 2013-4-2 03:00 should be given as 07 dd 04 02 03 00 For the 2013-10-31 00:30 should be given as 07 dd 0a 1f 00 1e