DLINKSW-TC-MIB
D-Link Systems, Inc.The module defines textual conventions used for all proprietary MIBs.
snmptranslate -m DLINKSW-TC-MIB -Tpsnmpwalk -v2c -c <community> -m DLINKSW-TC-MIB <host> 1.3.6.1.4.1.171.14.1Imports
| DLINK-ID-REC-MIB | dlinkIndustrialCommon |
|---|---|
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
| SNMPv2-SMI | Bits, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso |
| SNMPv2-TC | DisplayString, PhysAddress, TEXTUAL-CONVENTION |
OID tree
| Name | OID | Type | Access | Status |
|---|---|---|---|---|
| IdlinkSwTextualConvention | 1.3.6.1.4.1.171.14.1 | |||
identity The module defines textual conventions used for all proprietary MIBs. | ||||
Textual conventions
Dlink2kVlanListOCTET STRING (SIZE (0..256))This textual convention can specify a VLAN range of 2k VLANs, for example, 1 - 2048, 2049 - 4095, etc. Each octet within this value specifies a set of eight VLANs. The first octet specifies first 8 VLANs of the range specified in the description, the second octet specifies the next 8 VLANs, etc. Within each octet, the most significant bit represents the lowest numbered VLAN, and the least significant bit represents the highest numbered VLAN. Thus, each VLAN of the device is represented by a single bit within the value of this object. If the corresponding bit is '1' indicates that VLAN is included in the set of VLANs; '0' means the VLAN is not included. Note that if the length of this object is less than 256 octets, any 'missing' octets are assumed to contain the value zero.
DlinkTriggerINTEGERaction(2)none(1)The object defined by this textual convention can trigger an event. It always returns 'none(1)' when read the object.