DLINKSW-SWITCHPORT-MIB
D-Link Systems, Inc.This MIB module defines objects for per-port configuration which are not covered by standard MIB(s).
snmptranslate -m DLINKSW-SWITCHPORT-MIB -Tpsnmpwalk -v2c -c <community> -m DLINKSW-SWITCHPORT-MIB <host> 1.3.6.1.4.1.171.14.11Imports
| DLINK-ID-REC-MIB | dlinkIndustrialCommon |
|---|---|
| IF-MIB | ifIndex |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | Bits, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso |
| SNMPv2-TC | DisplayString, PhysAddress, TEXTUAL-CONVENTION, TruthValue |
OID tree
| Name | OID | Type | Access | Status |
|---|---|---|---|---|
| IdlinkSwSwitchPortMIB | 1.3.6.1.4.1.171.14.11 | |||
identity This MIB module defines objects for per-port configuration which are not covered by standard MIB(s). | ||||
| NdSwPortNotifications | 1.3.6.1.4.1.171.14.11.0 | |||
| NdSwPortObjects | 1.3.6.1.4.1.171.14.11.1 | |||
| TdSwPortIfTable | 1.3.6.1.4.1.171.14.11.1.1 | NA | ||
table · not-accessible · current A list of physical port interface entries. | ||||
| RdSwPortIfEntry | 1.3.6.1.4.1.171.14.11.1.1.1 | NA | ||
row · not-accessible · current An entry in dSwPortIfTable contains port-specific configuration which cannot be covered by standard MIBs (EtherLike or MAU-MIB).
| ||||
| CdSwPortIfB1000baseTCtrl | 1.3.6.1.4.1.171.14.11.1.1.1.1 | INTEGER | RW | |
column · INTEGER · read-write · current This object can be modified when port speed is configured to 1000BASE-T.
other(1) - the port is not 1000BASE-T or master/slave timing mode
is not specified.
b1000baseTMaster(2) - configure the port operate as master timing.
b1000baseTSlave(3) - configure the port operate as slave timing.
| ||||
| CdSwPortIfB10GbaseTCtrl | 1.3.6.1.4.1.171.14.11.1.1.1.2 | INTEGER | RW | |
column · INTEGER · read-write · current This object can be modified when port speed is configured to 10GBASE-T.
other(1) - the port is not 10GBASE-T or master/slave timing mode
is not specified.
b10GbaseTMaster(2) - configure the port operate as master timing.
b10GbaseTSlave(3) - configure the port operate as slave timing.
| ||||
| CdSwPortIfMdix | 1.3.6.1.4.1.171.14.11.1.1.1.3 | INTEGER | RW | |
column · INTEGER · read-write · current Uses the object to configure the state of Media-Dependent Interface Crossover (MDIX) of the port.
| ||||
| CdSwPortIfJumboFrameSize | 1.3.6.1.4.1.171.14.11.1.1.1.4 | Unsigned32 | RW | |
column · Unsigned32 · read-write · current The size of the largest packet which can be received on the interface, specified in octets. | ||||
| CdSwPortIfSpeedAutoDowngrade | 1.3.6.1.4.1.171.14.11.1.1.1.5 | TruthValue | RW | |
column · TruthValue · read-write · current This object indicates whether automatically downgrade the advertised speed in case a link cannot be established at the available speed. | ||||
| NdSwPortConformance | 1.3.6.1.4.1.171.14.11.2 | |||
| NdSwPortCompliances | 1.3.6.1.4.1.171.14.11.2.1 | |||
| MdSwPortCompliance | 1.3.6.1.4.1.171.14.11.2.1.1 | |||
compliance · current The compliance statement for entities which implement the DLINKSW-SWITCHPORT-MIB.
| ||||
| NdSwPortGroups | 1.3.6.1.4.1.171.14.11.2.2 | |||
| GdSwPortBasicGroup | 1.3.6.1.4.1.171.14.11.2.2.1 | |||
group · current This group contains the collection of fundamental port configuration objects which are not covered by standard MIBs. | ||||