DLINKSW-STORM-CTRL-MIB
D-Link Systems, Inc.This MIB module defines objects for Storm Control
snmptranslate -m DLINKSW-STORM-CTRL-MIB -Tpsnmpwalk -v2c -c <community> -m DLINKSW-STORM-CTRL-MIB <host> 1.3.6.1.4.1.171.14.25Imports
| DLINK-ID-REC-MIB | dlinkIndustrialCommon |
|---|---|
| IF-MIB | InterfaceIndex, ifIndex |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | Bits, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso |
| SNMPv2-TC | DisplayString, PhysAddress, TEXTUAL-CONVENTION |
OID tree
| Name | OID | Type | Access | Status |
|---|---|---|---|---|
| IdlinkSwStormCtrlMIB | 1.3.6.1.4.1.171.14.25 | |||
identity This MIB module defines objects for Storm Control | ||||
| NdStormCtrlMIBNotifications | 1.3.6.1.4.1.171.14.25.0 | |||
| !dStormCtrlOccurred | 1.3.6.1.4.1.171.14.25.0.1 | |||
notification · current This trap is sent when dStormCtrlNotifyEnable is 'stormOccurred' or 'both' and a storm is detected.
| ||||
| !dStormCtrlStormCleared | 1.3.6.1.4.1.171.14.25.0.2 | |||
notification · current This trap is sent when dStormCtrlNotifyEnable is 'stormCleared' or 'both' and a storm is cleared.
| ||||
| NdStormCtrlMIBObjects | 1.3.6.1.4.1.171.14.25.1 | |||
| NdStormCtrlGentrl | 1.3.6.1.4.1.171.14.25.1.1 | |||
| SdStormCtrlNotifyEnable | 1.3.6.1.4.1.171.14.25.1.1.1 | INTEGER | RW | |
scalar · INTEGER · read-write · current This object controls when a storm control notification will be generated.
If the object is set to
none(1): No notifications will be generated.
stormOccurred(2): A notification will be generated when a storm event is
detected.
stormCleared(3): A notification will be generated when a storm event is
cleared.
both (4): A notification will be generated both when a storm event is
detected and cleared.
NOTE:The default value of this object is none(1).
| ||||
| SdStormCtrlPollingInterval | 1.3.6.1.4.1.171.14.25.1.1.2 | Unsigned32 (5..600) | RW | |
scalar · Unsigned32 (5..600) · read-write · current The interval, in seconds, the switch detects the storm. | ||||
| SdStormCtrlPollingRetries | 1.3.6.1.4.1.171.14.25.1.1.3 | Integer32 (-1 | 0 | 1..360) | RW | |
scalar · Integer32 (-1 | 0 | 1..360) · read-write · current Specify the retry count. If the action is configured as 'shutdown' mode and storm keep as long as interval * retries, the port will enters error-disabled state. The effective range is from 1 to 360. 0 means that a 'shutdown' mode port will directly enter error-disabled state when storm is detected. -1 means that a 'shutdown' mode port will never enter error-disabled state even if storm is detected. | ||||
| TdStormCtrlThresholdTable | 1.3.6.1.4.1.171.14.25.1.2 | NA | ||
table · not-accessible · current A table consists of a list of interface-specific threshold configuration for storm control. | ||||
| RdStormCtrlThresholdEntry | 1.3.6.1.4.1.171.14.25.1.2.1 | NA | ||
row · not-accessible · current An entry presents threshold configuration on an interface.
| ||||
| CdStormCtrlTrafficType | 1.3.6.1.4.1.171.14.25.1.2.1.1 | DStormCtlTrafficType | NA | |
column · DStormCtlTrafficType · not-accessible · current This object indicates the traffic type of the entry. | ||||
| CdStormCtrlThresholdType | 1.3.6.1.4.1.171.14.25.1.2.1.2 | DStormCtlThrType | RC | |
column · DStormCtlThrType · read-create · current This object indicates the threshold type of the entry. | ||||
| CdStormCtrlRiseThresholdValue | 1.3.6.1.4.1.171.14.25.1.2.1.3 | DStormCtlThrTypeValue | RC | |
column · DStormCtlThrTypeValue · read-create · current Specifies the rise threshold value of the entry. A special value of -1 indicates the storm control of the corresponding traffic type is not enabled on that interface. | ||||
| CdStormCtrlLowThresholdValue | 1.3.6.1.4.1.171.14.25.1.2.1.4 | DStormCtlThrTypeValue | RC | |
column · DStormCtlThrTypeValue · read-create · current Specifies the low level threshold. A special value of -1 indicates low level is not specified. The default value will be 80% of the value of the corresponding dStormCtrlRiseThresholdValue if applicable. | ||||
| TdStormCtrlIfTable | 1.3.6.1.4.1.171.14.25.1.3 | NA | ||
table · not-accessible · current A table consists of a list of interface-specific configuration for storm control. | ||||
| RdStormCtrlIfEntry | 1.3.6.1.4.1.171.14.25.1.3.1 | NA | ||
row · not-accessible · current An entry presents storm control configuration on an interface.
| ||||
| CdStormCtrlIfActionType | 1.3.6.1.4.1.171.14.25.1.3.1.1 | INTEGER | RW | |
column · INTEGER · read-write · current Specify the action will be taken when storm occurs: none(1) - Not filter the storm packets. shutdown(2) - The storm-control shutdown the port when the rise threshold is reached. drop(3) - The storm-control always discards packets that exceed the rise threshold.
| ||||
| TdStormCtrlTrafficInfoTable | 1.3.6.1.4.1.171.14.25.1.4 | NA | ||
table · not-accessible · current A table consists of a list of status information for traffic types on interfaces. Only the interface/traffic-type on which the storm control is enabled will present on this table. | ||||
| RdStormCtrlTrafficInfoEntry | 1.3.6.1.4.1.171.14.25.1.4.1 | NA | ||
row · not-accessible · current An entry presents the status of a traffic type on an interface.
| ||||
| CdStormCtrlCurTrafficUnitType | 1.3.6.1.4.1.171.14.25.1.4.1.1 | DStormCtlThrType | RO | |
column · DStormCtlThrType · read-only · current This object indicates the current traffic unit of the entry. | ||||
| CdStormCtrlCurTrafficValue | 1.3.6.1.4.1.171.14.25.1.4.1.2 | DStormCtlThrTypeValue | RO | |
column · DStormCtlThrTypeValue · read-only · current Indicating the current traffic value on the interface. | ||||
| CdStormCtrlTrafficInfoStatus | 1.3.6.1.4.1.171.14.25.1.4.1.3 | INTEGER | RO | |
column · INTEGER · read-only · current This object indicates the current status of storm control on a
given interface for a given traffic type.
forwarding(1): no storm event has been detected.
dropped(2): a storm event has occurred and the storm traffic
exceeding the threshold is dropped.
errorDisabled(3): the port is disabled due to a storm.
linkDown(4): the port is physically linked down.
inactive(5): Indicates that storm control is not
enabled for the given traffic type.
| ||||
| NdStormCtrlNotifyInfo | 1.3.6.1.4.1.171.14.25.1.5 | |||
| SdStormCtrlNotifyTrafficType | 1.3.6.1.4.1.171.14.25.1.5.1 | DStormCtlTrafficType | AN | |
scalar · DStormCtlTrafficType · accessible-for-notify · current This object is used by dStormCtrlOccurred and dStormCtrlStormCleared to indicate the traffic type of the occurred storm. | ||||
| NdStormCtrlMIBConformance | 1.3.6.1.4.1.171.14.25.2 | |||
| NdStormCtrlCompliances | 1.3.6.1.4.1.171.14.25.2.1 | |||
| MdStormCtrlCompliance | 1.3.6.1.4.1.171.14.25.2.1.1 | |||
compliance · current The compliance statement for entities which implement the DLINKSW-STORM-CTRL-MIB.
| ||||
| NdStormCtrlGroup | 1.3.6.1.4.1.171.14.25.2.2 | |||
| GdStormCtrlBaiscGroup | 1.3.6.1.4.1.171.14.25.2.2.1 | |||
group · current A collection of objects providing the information for storm control
| ||||
| GdStormCtrlNotifyGroup | 1.3.6.1.4.1.171.14.25.2.2.2 | |||
group · current The collection of notifications used for storm control. | ||||
Textual conventions
DStormCtlThrTypeINTEGERkbps(2)percentage(3)pps(1)The type of storm control threshold is configured on an interface. pps(1) - the threshold is configured as packet count per second. kbps(2) - the threshold is configured as a rate of bits per second. percentage(3) - the threshold is configured as a percentage of total bandwidth per port.DStormCtlThrTypeValueInteger32Denotes a generic threshold value. A DStormCtlThrTypeValue value is always interpreted within the context of a DStormCtlThrType value. Every usage of the DStormCtlThrTypeValue textual convention is required to specify the DStormCtlThrType object that provides the context. The unit and valid range are as follows: Threshold Type Unit Valid Range ============= ===================== ================= pps packet per second 1 ~ 2147483647 kbps bits per second 1 ~ 2147483647 percentage percentage 1 ~ 100 The special value of -1 indicates this object is undefined.
DStormCtlTrafficTypeINTEGERbroadcast(1)multicast(2)unicast(3)The type of storm control traffic type. broadcast(1) - broadcast storm. multicast(2) - including unknown L2 multicast, known L2 multicast, unknown IP multicast and known IP multicast. unicast(3) - when the action is configured as 'shutdown mode', unicast refers to both known and unknown unicast packet; Otherwise, unicast refers to unknown unicast packet.
Traps / Notifications
- dStormCtrlOccurred
1.3.6.1.4.1.171.14.25.0.1 - dStormCtrlStormCleared
1.3.6.1.4.1.171.14.25.0.2