DLINKSW-STACK-MIB
D-Link Systems, Inc.This MIB module defines objects for stacking feature.
snmptranslate -m DLINKSW-STACK-MIB -Tpsnmpwalk -v2c -c <community> -m DLINKSW-STACK-MIB <host> 1.3.6.1.4.1.171.14.9Imports
| DLINK-ID-REC-MIB | dlinkIndustrialCommon |
|---|---|
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | Bits, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso |
| SNMPv2-TC | DisplayString, MacAddress, PhysAddress, TEXTUAL-CONVENTION, TruthValue |
OID tree
| Name | OID | Type | Access | Status |
|---|---|---|---|---|
| IdlinkSwStackMIB | 1.3.6.1.4.1.171.14.9 | |||
identity This MIB module defines objects for stacking feature. | ||||
| NdStackMIBNotifications | 1.3.6.1.4.1.171.14.9.0 | |||
| !dStackInsertNotification | 1.3.6.1.4.1.171.14.9.0.1 | |||
notification · current Device Hot Insert notification. | ||||
| !dStackRemoveNotification | 1.3.6.1.4.1.171.14.9.0.2 | |||
notification · current Device Hot Remove notification. | ||||
| !dStackFailureNotification | 1.3.6.1.4.1.171.14.9.0.3 | |||
| !dStackTPChangeNotification | 1.3.6.1.4.1.171.14.9.0.4 | |||
notification · current The stacking topology change notification. | ||||
| !dStackRoleChangeNotification | 1.3.6.1.4.1.171.14.9.0.5 | |||
notification · current The stacking device role change notification. | ||||
| NdStackMIBObjects | 1.3.6.1.4.1.171.14.9.1 | |||
| NdStackMgmt | 1.3.6.1.4.1.171.14.9.1.1 | |||
| SdStackTopology | 1.3.6.1.4.1.171.14.9.1.1.1 | INTEGER | RO | |
scalar · INTEGER · read-only · current This object indicates the state of the stacking topology.
| ||||
| SdStackMyBoxId | 1.3.6.1.4.1.171.14.9.1.1.2 | Integer32 (1..255) | RO | |
scalar · Integer32 (1..255) · read-only · current This object indicates the box ID of the device. | ||||
| SdStackNumOfDevices | 1.3.6.1.4.1.171.14.9.1.1.3 | Integer32 (1..255) | RO | |
scalar · Integer32 (1..255) · read-only · current This object indicates the current number of devices in the stacking system. | ||||
| SdStackAdminEnabled | 1.3.6.1.4.1.171.14.9.1.1.4 | TruthValue | RW | |
scalar · TruthValue · read-write · current This object indicates whether the administrative stacking mode has been enabled or not. The new setting will not take effect until the next reboot. | ||||
| SdStackPreempt | 1.3.6.1.4.1.171.14.9.1.1.5 | TruthValue | RW | |
scalar · TruthValue · read-write · current This object indicates whether the preemption is enabled or not. When preemption is enabled, the unit that play master role will change as units with better priority are added to the stack. | ||||
| SdStackTrapStateEnabled | 1.3.6.1.4.1.171.14.9.1.1.6 | TruthValue | RW | |
scalar · TruthValue · read-write · current This object indicates whether the sending of stacking related traps is enabled or not. | ||||
| SdStackBandwidth | 1.3.6.1.4.1.171.14.9.1.1.7 | INTEGER | RW | |
scalar · INTEGER · read-write · current This object indicates the stacking port bandwidth.
twoPorts - two ports are used for stacking, each port works as a
SIO port
fourPorts - four ports are used for stacking, each two ports are
aggregated together and work as a SIO port.
The stacking port bandwidth setting of a switch device must be set
before the switch unit can be chained with other switch devices.
The setting will be saved on local switch unit if the user saves
the configuration.
The change of stacking port bandwidth will not take effect until
the next reboot.
| ||||
| TdStackUnitInfoTable | 1.3.6.1.4.1.171.14.9.1.1.8 | NA | ||
table · not-accessible · current This table displays the information of the devices in the stacking system. When stacking mode is not effectively enabled, there is no entry in this table. | ||||
| RdStackUnitInfoEntry | 1.3.6.1.4.1.171.14.9.1.1.8.1 | NA | ||
| CdStackInfoBoxId | 1.3.6.1.4.1.171.14.9.1.1.8.1.1 | Integer32 (1..255) | NA | |
column · Integer32 (1..255) · not-accessible · current This object indicates box ID of the entry. | ||||
| CdStackInfoExist | 1.3.6.1.4.1.171.14.9.1.1.8.1.2 | TruthValue | RO | |
column · TruthValue · read-only · current The state of existence of the unit. | ||||
| CdStackInfoRole | 1.3.6.1.4.1.171.14.9.1.1.8.1.3 | INTEGER | RO | |
column · INTEGER · read-only · current The stacking role of the unit.
| ||||
| CdStackInfoUserSetBoxId | 1.3.6.1.4.1.171.14.9.1.1.8.1.4 | Integer32 (0..255) | RW | |
column · Integer32 (0..255) · read-write · current The assigned box ID of the stacking unit.
The switch unit cannot be added to a switch stack if its box ID is conflict
with existing switch units in the stack.
When read, the value of 0 indicates the box ID of the device is automatically
assigned.
Note: the newly changed (setting) box ID will take effect after the next boot. | ||||
| CdStackInfoModuleName | 1.3.6.1.4.1.171.14.9.1.1.8.1.5 | DisplayString (SIZE (0..32)) | RO | |
column · DisplayString (SIZE (0..32)) · read-only · current This object indicates the module name of the device. | ||||
| CdStackInfoPriority | 1.3.6.1.4.1.171.14.9.1.1.8.1.6 | Integer32 (0..63) | RW | |
column · Integer32 (0..63) · read-write · current The priority of the stacking device. When read, if preemption is disabled, the master use 0 (the highest priority) to make sure the current master can hold off the challenges from other devices. The special value of 0 is not allowed for 'SET' operation. | ||||
| CdStackInfoMacAddr | 1.3.6.1.4.1.171.14.9.1.1.8.1.7 | MacAddress | RO | |
column · MacAddress · read-only · current The MAC address of the device. | ||||
| CdStackInfoPromVersion | 1.3.6.1.4.1.171.14.9.1.1.8.1.8 | DisplayString (SIZE (0..255)) | RO | |
column · DisplayString (SIZE (0..255)) · read-only · current A textual string containing the PROM version of the stacking device. | ||||
| CdStackInfoFirmwareVer | 1.3.6.1.4.1.171.14.9.1.1.8.1.9 | DisplayString (SIZE (0..255)) | RO | |
column · DisplayString (SIZE (0..255)) · read-only · current A textual string containing the firmware version of the stacking device. | ||||
| CdStackInfoHardwareVer | 1.3.6.1.4.1.171.14.9.1.1.8.1.10 | DisplayString (SIZE (0..255)) | RO | |
column · DisplayString (SIZE (0..255)) · read-only · current A textual string containing the hardware version of the stacking device. | ||||
| CdStackInfoAdminBandwidth | 1.3.6.1.4.1.171.14.9.1.1.8.1.11 | INTEGER | RO | |
column · INTEGER · read-only · current This object indicates the administrative stacking port bandwidth of the device.
| ||||
| CdStackInfoSIO1ActiveBandwidth | 1.3.6.1.4.1.171.14.9.1.1.8.1.12 | INTEGER | RO | |
column · INTEGER · read-only · current Indicates the current link bandwidth in the SIO1. onePort - only one port is linked in the SIO1. twoPorts - two ports are linked in the SIO1. linkDown - SIO1 is link down
| ||||
| CdStackInfoSIO2ActiveBandwidth | 1.3.6.1.4.1.171.14.9.1.1.8.1.13 | INTEGER | RO | |
column · INTEGER · read-only · current Indicates the current link bandwidth in the SIO2. onePort - only one port is linked in the SIO2. twoPorts - two ports are linked in the SIO2. linkDown - SIO2 is link down
| ||||
| CdStackInfoStartPort | 1.3.6.1.4.1.171.14.9.1.1.8.1.14 | Integer32 (1..65535) | RO | |
column · Integer32 (1..65535) · read-only · current This object indicates the starting port of this unit. | ||||
| CdStackInfoPortRange | 1.3.6.1.4.1.171.14.9.1.1.8.1.15 | Integer32 (0..65535) | RO | |
column · Integer32 (0..65535) · read-only · current This object indicates the total ports of this unit. | ||||
| NdStackNotificationInfo | 1.3.6.1.4.1.171.14.9.1.2 | |||
| SdStackNotifyInfoBoxId | 1.3.6.1.4.1.171.14.9.1.2.1 | Integer32 (1..255) | AN | |
scalar · Integer32 (1..255) · accessible-for-notify · current This object indicates box ID of the notification. | ||||
| SdStackNotifyInfoTopologyType | 1.3.6.1.4.1.171.14.9.1.2.2 | INTEGER | AN | |
scalar · INTEGER · accessible-for-notify · current This object indicates the current stacking topology of the notification.
| ||||
| SdStackNotifyInfoRoleChangeType | 1.3.6.1.4.1.171.14.9.1.2.3 | INTEGER | AN | |
scalar · INTEGER · accessible-for-notify · current This object indicates stacking role change of the notification.
| ||||
| NdStackMIBConformance | 1.3.6.1.4.1.171.14.9.2 | |||
| NdStackMIBCompliances | 1.3.6.1.4.1.171.14.9.2.1 | |||
| MdStackCompliance | 1.3.6.1.4.1.171.14.9.2.1.1 | |||
compliance · current The compliance statement for entities which implement the DLINKSW-STACK-MIB. | ||||
| NdStackMIBGroups | 1.3.6.1.4.1.171.14.9.2.2 | |||
| GdStackBasicMgmtGroup | 1.3.6.1.4.1.171.14.9.2.2.1 | |||
group · current A collection of objects provides basic management and information for stacking feature.
| ||||
| GdStackBandwidthMgmtGroup | 1.3.6.1.4.1.171.14.9.2.2.2 | |||
group · current A collection of objects providing management and information for stacking port bandwidth. | ||||
| GdStackNotifGroup | 1.3.6.1.4.1.171.14.9.2.2.3 | |||
group · current A collection of notifications for indicating the status change of stacking. | ||||
Traps / Notifications
- dStackFailureNotification
1.3.6.1.4.1.171.14.9.0.3 - dStackInsertNotification
1.3.6.1.4.1.171.14.9.0.1 - dStackRemoveNotification
1.3.6.1.4.1.171.14.9.0.2 - dStackRoleChangeNotification
1.3.6.1.4.1.171.14.9.0.5 - dStackTPChangeNotification
1.3.6.1.4.1.171.14.9.0.4