DLINKSW-SSH-MIB
D-Link Systems, Inc.This MIB module defines objects for Secure Shell (SSH).
snmptranslate -m DLINKSW-SSH-MIB -Tpsnmpwalk -v2c -c <community> -m DLINKSW-SSH-MIB <host> 1.3.6.1.4.1.171.14.17Imports
| DLINK-ID-REC-MIB | dlinkIndustrialCommon |
|---|---|
| IF-MIB | InterfaceIndexOrZero |
| INET-ADDRESS-MIB | InetAddress, InetAddressType |
| SNMP-FRAMEWORK-MIB | SnmpAdminString |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | Bits, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso |
| SNMPv2-TC | DisplayString, PhysAddress, RowStatus, TEXTUAL-CONVENTION, TimeStamp, TruthValue |
OID tree
| Name | OID | Type | Access | Status |
|---|---|---|---|---|
| IdlinkSwSshMIB | 1.3.6.1.4.1.171.14.17 | |||
identity This MIB module defines objects for Secure Shell (SSH). | ||||
| NdSshNotifications | 1.3.6.1.4.1.171.14.17.0 | |||
| NdSshObjects | 1.3.6.1.4.1.171.14.17.1 | |||
| NdSshGeneral | 1.3.6.1.4.1.171.14.17.1.1 | |||
| SdSshEnabled | 1.3.6.1.4.1.171.14.17.1.1.1 | TruthValue | RW | |
scalar · TruthValue · read-write · current This object enables or disables Secure Shell (SSH) service. | ||||
| SdSshVersion | 1.3.6.1.4.1.171.14.17.1.1.2 | INTEGER | RO | |
scalar · INTEGER · read-only · current The version of SSH is running on the switch. The version that is currently supported is v2.
| ||||
| SdSshTimeout | 1.3.6.1.4.1.171.14.17.1.1.3 | Integer32 (30..600) | RW | |
scalar · Integer32 (30..600) · read-write · current The time interval that the switch waits for the SSH client to respond during the SSH negotiation phase.
| ||||
| SdSshAuthenticationRetries | 1.3.6.1.4.1.171.14.17.1.1.4 | Integer32 (1..32) | RW | |
scalar · Integer32 (1..32) · read-write · current The number of authentication attempts after the session has reset or authentication failed. | ||||
| SdSshServicePort | 1.3.6.1.4.1.171.14.17.1.1.5 | Unsigned32 | RW | |
scalar · Unsigned32 · read-write · current Specifies the service port, such as 22, which Secure Shell (SSH) needs to connect to. | ||||
| SdSshSrcIfIndex | 1.3.6.1.4.1.171.14.17.1.1.6 | InterfaceIndexOrZero | RW | |
scalar · InterfaceIndexOrZero · read-write · current This object specifies the ifIdex value of the source source address of SSH packets that initiates a SSH connection. The value of this object should be a valid 'ifIndex' value. The value of this object being 'zero' implies that the IP address of the closest interface will be used. | ||||
| NdSshKeyConfiguration | 1.3.6.1.4.1.171.14.17.1.2 | |||
| TdSshCryptoKeyPairTable | 1.3.6.1.4.1.171.14.17.1.2.1 | NA | ||
table · not-accessible · current dSshCryptokeyTable is a table that lets the user configure the SSH keys | ||||
| RdSshCryptoKeyPairEntry | 1.3.6.1.4.1.171.14.17.1.2.1.1 | NA | ||
row · not-accessible · current A SSH key table entry. The index specifies which protocol the user wants to generate the key for. An entry is created/removed when a key pair for a specific protocol is generated or deleted via CLI or by issuing appropriate sets to this table using snmp. To replace the existing key for a protocol 1. Specify the Protocol: dSshCryptoKeyPairIndex 2. Specify the modulus size of the key pair(s): dSshCryptoKeyPairNBits 3. Set dSshCryptoKeyPairReplace as true(1). | ||||
| CdSshCryptoKeyPairIndex | 1.3.6.1.4.1.171.14.17.1.2.1.1.1 | INTEGER | NA | |
column · INTEGER · not-accessible · current The SSH Protocol Identifier for which this entry
pertains to.
rsa - A public-key cryptosystem defined by Rivest,
Shamir and Adleman.
dsa - Digital Signature Algorithm, a public key
cipher used to generate digital signatures.
| ||||
| CdSshCryptoKeyPairNBits | 1.3.6.1.4.1.171.14.17.1.2.1.1.2 | Integer32 (360 | 512 | 768 | 1024 | 2048) | RC | |
column · Integer32 (360 | 512 | 768 | 1024 | 2048) · read-create · current Specifies the modulus size of the key pair(s): For RSA, the valid values are 360, 512, 768, 1024, and 2048. For DSA, the valid value is fixed as 1024. For SSH version 2, the minimum recommended key size is 768 bits. A key size with a larger number provides higher security but takes longer to generate. This object cannot be modified while this row is active, unless the associated dSshCryptoKeyPairReplace object is set to True in the same Set PDU. | ||||
| CdSshCryptoKeyPairReplace | 1.3.6.1.4.1.171.14.17.1.2.1.1.3 | TruthValue | RC | |
column · TruthValue · read-create · current This object specifies whether a new key should replace an existing key for the protocol. No action is taken if this object is set to 'false'. The value of this object when read is always 'false'. | ||||
| CdSshCryptoKeyPairLastCreateTime | 1.3.6.1.4.1.171.14.17.1.2.1.1.4 | TimeStamp | RO | |
column · TimeStamp · read-only · current The time of the last creation of the key. | ||||
| CdSshCryptoKeyPairString | 1.3.6.1.4.1.171.14.17.1.2.1.1.6 | DisplayString (SIZE (0..255)) | RO | |
column · DisplayString (SIZE (0..255)) · read-only · current The generated SSH public key string. | ||||
| CdSshCryptoKeyPairRowStatus | 1.3.6.1.4.1.171.14.17.1.2.1.1.99 | RowStatus | RC | |
column · RowStatus · read-create · current Status of this SSH key pair. | ||||
| SdSshCryptoKeyGenerationStatus | 1.3.6.1.4.1.171.14.17.1.2.2 | INTEGER | RO | |
scalar · INTEGER · read-only · current This object indicates the status of the last key generation request.
| ||||
| TdSshConnectionTable | 1.3.6.1.4.1.171.14.17.1.3 | NA | ||
table · not-accessible · current A table to display the status of Secure Shell (SSH) server connections. | ||||
| RdSshConnectionEntry | 1.3.6.1.4.1.171.14.17.1.3.1 | NA | ||
row · not-accessible · current An entry (conceptual row) in the dSshConnectionTable object.
| ||||
| CdSshConnectionSID | 1.3.6.1.4.1.171.14.17.1.3.1.1 | Integer32 (0..65535) | NA | |
column · Integer32 (0..65535) · not-accessible · current A unique number that identifies the SSH session. | ||||
| CdSshConnectionVersion | 1.3.6.1.4.1.171.14.17.1.3.1.2 | INTEGER | RO | |
column · INTEGER · read-only · current The protocol version number that the SSH client supports.
| ||||
| CdSshConnectionCipher | 1.3.6.1.4.1.171.14.17.1.3.1.3 | DisplayString | RO | |
column · DisplayString · read-only · current The crypto/Hashed Message Authentication Code (HMAC) algorithm that the SSH client is using. | ||||
| CdSshConnectionUserID | 1.3.6.1.4.1.171.14.17.1.3.1.4 | DisplayString | RO | |
column · DisplayString · read-only · current The login username that has been authenticated for the session. | ||||
| CdSshConnectionHostAddrType | 1.3.6.1.4.1.171.14.17.1.3.1.5 | InetAddressType | RO | |
column · InetAddressType · read-only · current The type of Internet address for client establised this session. | ||||
| CdSshConnectionHostAddr | 1.3.6.1.4.1.171.14.17.1.3.1.6 | InetAddress | RO | |
column · InetAddress · read-only · current The Internet address assigned for client establised this session. | ||||
| TdSshUserTable | 1.3.6.1.4.1.171.14.17.1.4 | NA | ||
table · not-accessible · current This table lists all users and their corresponding authentication methods through which SSH client can login. | ||||
| RdSshUserEntry | 1.3.6.1.4.1.171.14.17.1.4.1 | NA | ||
| CdSshUserName | 1.3.6.1.4.1.171.14.17.1.4.1.1 | SnmpAdminString (SIZE (1..32)) | NA | |
column · SnmpAdminString (SIZE (1..32)) · not-accessible · current This object indicates the name of SSH user. | ||||
| CdSshUserAuthMethod | 1.3.6.1.4.1.171.14.17.1.4.1.2 | INTEGER | RW | |
column · INTEGER · read-write · current This object indicates the authentication method for this user account. 'password' - use password authentication method for this user account. 'publickey' - use public key authentication method for this user account. 'hostbased' - use host-based authentication method for this user account.
| ||||
| CdSshUserKeyFilename | 1.3.6.1.4.1.171.14.17.1.4.1.3 | SnmpAdminString (SIZE (0..255)) | RW | |
column · SnmpAdminString (SIZE (0..255)) · read-write · current This object indicates the name of the file storing the SSH public key. The SSH public key is used to authenticate the SSH session for this user. If dSshUserAuthMethod is 'publickey', this object refers to user's public key. If dSshUserAuthMethod is 'hostbased', this object refers to client's host key. If dSshUserAuthMethod is 'password', the value of this object will be ignored and a zero-length string is always returned when read. | ||||
| CdSshUserHostName | 1.3.6.1.4.1.171.14.17.1.4.1.4 | DisplayString (SIZE (0..255)) | RW | |
column · DisplayString (SIZE (0..255)) · read-write · current The host name of the SSH client. This object is only valid for host-based authentication method. For password and public key authentication method, a zero-length string is always returned when read. | ||||
| CdSshUserHostAddrType | 1.3.6.1.4.1.171.14.17.1.4.1.5 | InetAddressType | RW | |
column · InetAddressType · read-write · current The host address type of the SSH client. This object is only valid for host-based authentication method. For password and publickey authentication method, unknown(0) is always returned when read. | ||||
| CdSshUserHostAddr | 1.3.6.1.4.1.171.14.17.1.4.1.6 | InetAddress | RW | |
column · InetAddress · read-write · current The host address of the SSH client. This object is only valid for host-based authentication method. For password and public key authentication method, a zero-length string is always returned when read. | ||||
| CdSshUserRowStatus | 1.3.6.1.4.1.171.14.17.1.4.1.99 | RowStatus | RC | |
column · RowStatus · read-create · current Status of this SSH user entry. When read, active(1) is always returned. If administrator wants to modify the authentication method for a specific user account, setting createAndGo(4) for this node after corresponding parameters are configured: For password, there is no need to specify more parameters. For publickey, dSshUserKeyFilename must be specified. For hostbased, dSshUserKeyFilename and dSshUserHostName must be specified, but parameters dSshUserHostAddrType and dSshUserHostAddr are optional. Other value of this node is not supported. | ||||
| NdSshConformance | 1.3.6.1.4.1.171.14.17.2 | |||
| NdSshCompliances | 1.3.6.1.4.1.171.14.17.2.1 | |||
| MdSshCompliance | 1.3.6.1.4.1.171.14.17.2.1.1 | deprecated | ||
compliance · deprecated The compliance statement for entities which implement the DLINKSW-SSH-MIB.
| ||||
| NdSshGroups | 1.3.6.1.4.1.171.14.17.2.2 | |||
| GdSshConfigGroup | 1.3.6.1.4.1.171.14.17.2.2.1 | |||
group · current A collection of objects for SSH configuration. | ||||
| GdSshConnectionGroup | 1.3.6.1.4.1.171.14.17.2.2.2 | |||
group · current A collection of objects to display SSH connection related information. | ||||
| GdSshUserGroup | 1.3.6.1.4.1.171.14.17.2.2.3 | |||
group · current A collection of objects related to SSH users. | ||||