DLINKSW-PORT-SECURITY-MIB
D-Link Systems, Inc.This MIB module defines objects for port security.
snmptranslate -m DLINKSW-PORT-SECURITY-MIB -Tpsnmpwalk -v2c -c <community> -m DLINKSW-PORT-SECURITY-MIB <host> 1.3.6.1.4.1.171.14.8Imports
| DLINK-ID-REC-MIB | dlinkIndustrialCommon |
|---|---|
| IF-MIB | InterfaceIndex, ifIndex |
| Q-BRIDGE-MIB | VlanId, VlanIdOrNone |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | Bits, Counter64, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso |
| SNMPv2-TC | DisplayString, MacAddress, PhysAddress, RowStatus, TEXTUAL-CONVENTION, TruthValue |
OID tree
| Name | OID | Type | Access | Status |
|---|---|---|---|---|
| IdlinkSwPortSecurityMIB | 1.3.6.1.4.1.171.14.8 | |||
identity This MIB module defines objects for port security. | ||||
| NdPortSecNotifications | 1.3.6.1.4.1.171.14.8.0 | |||
| !dPortSecMacAddrViolation | 1.3.6.1.4.1.171.14.8.0.1 | |||
notification · current The address violation notification is generated when port security address violation is detected (dPortSecIfViolationCount increases). | ||||
| NdPortSecObjects | 1.3.6.1.4.1.171.14.8.1 | |||
| SdPortSecGlobalNotifControl | 1.3.6.1.4.1.171.14.8.1.1 | TruthValue | RW | |
scalar · TruthValue · read-write · current Set to 'true' to enable global SNMP Notification for port security feature. Setting the object to 'false' will disable SNMP notifications. | ||||
| SdPortSecGlobalNotifRate | 1.3.6.1.4.1.171.14.8.1.2 | Unsigned32 (0..1000) | RW | |
scalar · Unsigned32 (0..1000) · read-write · current Expressed in the number of notifications can be generated per second. The global control configures the rate-limit of SNMP Notification for port security feature. This object specifies the rate at which SNMP Notification is generated when dPortSecIfViolationCount increases. When the rate is over the configured rate, the SNMP Notification is suppressed but it does not affect dPortSecIfViolationCount. A value of 0 indicates that an SNMP Notification is generated for every security violation.
| ||||
| NdPortSecNotifyInfo | 1.3.6.1.4.1.171.14.8.1.3 | |||
| SdPortSecIfViolationMacAddress | 1.3.6.1.4.1.171.14.8.1.3.1 | MacAddress | AN | |
scalar · MacAddress · accessible-for-notify · current This object is also used as a variable in the dPortSecMacAddrViolation notification to contain the value of the MAC address which caused the violation. | ||||
| SdPortSecGlobalMaximumNum | 1.3.6.1.4.1.171.14.8.1.4 | Integer32 | RW | |
scalar · Integer32 · read-write · current Indicates the system maximum addresses number (users) allowed. A value of -1 means no-limit. The max entry range is (1..N). The value N means the max number and is determined by the project itself. | ||||
| TdPortSecVlanTable | 1.3.6.1.4.1.171.14.8.1.5 | NA | ||
table · not-accessible · current The table is used to configure and display port security settings and status for a particular VLAN. | ||||
| RdPortSecVlanEntry | 1.3.6.1.4.1.171.14.8.1.5.1 | NA | ||
row · not-accessible · current An entry contains port security information for a particular VLAN.
| ||||
| CdPortSecVlanID | 1.3.6.1.4.1.171.14.8.1.5.1.1 | VlanId | NA | |
column · VlanId · not-accessible · current This object specifies the VLAN ID for address learning. | ||||
| CdPortSecVlanMaximumNum | 1.3.6.1.4.1.171.14.8.1.5.1.2 | Integer32 | RW | |
column · Integer32 · read-write · current Indicates the VLAN maximum addresses number (users) allowed. A value of -1 means no-limit. The range is (1..N). The value N means the upper limit and is determined by the project itself. | ||||
| CdPortSecVlanCurrentNum | 1.3.6.1.4.1.171.14.8.1.5.1.3 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current Indicates the current number of secure MAC addresses on this VLAN. | ||||
| TdPortSecIfTable | 1.3.6.1.4.1.171.14.8.1.6 | NA | ||
table · not-accessible · current The table is used to configure and display port security settings and status for a particular interface. | ||||
| RdPortSecIfEntry | 1.3.6.1.4.1.171.14.8.1.6.1 | NA | ||
row · not-accessible · current Entry containing port security information for a particular interface.
| ||||
| CdPortSecIfEnable | 1.3.6.1.4.1.171.14.8.1.6.1.1 | TruthValue | RW | |
column · TruthValue · read-write · current Uses the object to enable or disable port security. | ||||
| CdPortSecIfCurrentStatus | 1.3.6.1.4.1.171.14.8.1.6.1.2 | INTEGER | RO | |
column · INTEGER · read-only · current This object represents the operational status
of the port security feature on an interface.
notEnabled(1) - This indicates port security
is not enabled.
forwarding(2) - This indicates port security is
operational.
errDisabled(3) - This indicates that the port is
shutdown due to port security
violation when the object
dPortSecIfViolationAction is of type
'shutdown'.
| ||||
| CdPortSecIfMaximumNum | 1.3.6.1.4.1.171.14.8.1.6.1.3 | Unsigned32 | RW | |
column · Unsigned32 · read-write · current This object sets the maximum number of secure MAC addresses (users) allowed. | ||||
| CdPortSecIfViolationAction | 1.3.6.1.4.1.171.14.8.1.6.1.4 | INTEGER | RW | |
column · INTEGER · read-write · current This object sets the action to be taken when a security violation is detected.
protect(1) - Drops all the packets from the insecure hosts at the
port-security process level but does not increment
the security-violation count.
restrict(2) - Drops all packets from the insecure hosts at the
port-security process level and increments the
security-violation count.
shutdown(3) - Shuts down the port if there is a security violation.
| ||||
| CdPortSecIfSecureMode | 1.3.6.1.4.1.171.14.8.1.6.1.5 | INTEGER | RW | |
column · INTEGER · read-write · current Use the object to set the port security mode.
permanent(1) - Under this mode all learned MAC addresses won't be
purged unless a user deletes these entries manually.
deleteOnTimeout(2) - Under this mode all learned MAC addresses
will be purged when an entry ages out or a user deletes
these entries manually.
| ||||
| CdPortSecIfAgingTime | 1.3.6.1.4.1.171.14.8.1.6.1.6 | INTEGER (0..1440) | RW | |
column · INTEGER (0..1440) · read-write · current Use the object to set aging time for auto-learned dynamic secured address. When 0 is set on the specified interface, it means the port security aging has been disabled. | ||||
| CdPortSecIfAgingType | 1.3.6.1.4.1.171.14.8.1.6.1.7 | INTEGER | RW | |
column · INTEGER · read-write · current Use the object to set aging type for auto-learned dynamic secured address.
absolute(1) - Under this aging type, all the secured address on this interface will
age out exactly after the time specified.
inactivity(2) - Under this aging type, all learned MAC addresses on this interface
will age out only if there is no data traffic from the secure source
address for the specified time period.
| ||||
| CdPortSecIfClearDynamicAddr | 1.3.6.1.4.1.171.14.8.1.6.1.8 | INTEGER | RW | |
column · INTEGER · read-write · current Setting this object to 'clear' to clear the addresses which will be purged out when an entry is aged out on the corresponding interface. No action is taken if this object is set to 'noOp'. When read, the value 'noOp' is returned.
| ||||
| CdPortSecIfCurrentNum | 1.3.6.1.4.1.171.14.8.1.6.1.9 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current Indicates the current number of secure MAC addresses on this interface. | ||||
| CdPortSecIfViolationCount | 1.3.6.1.4.1.171.14.8.1.6.1.10 | Counter64 | RO | |
column · Counter64 · read-only · current Indicates the number of address violations occurred on a secure interface. The counter will be initialized to zero when the port security feature is enabled on an interface. | ||||
| SdPortSecAddrTableCurrentNum | 1.3.6.1.4.1.171.14.8.1.7 | Unsigned32 | RO | |
scalar · Unsigned32 · read-only · current This object indicates the number of entries present in the dPortSecAddrTable. | ||||
| TdPortSecAddrTable | 1.3.6.1.4.1.171.14.8.1.8 | NA | ||
table · not-accessible · current A list of port security entries containing the secure MAC address information. | ||||
| RdPortSecAddrEntry | 1.3.6.1.4.1.171.14.8.1.8.1 | NA | ||
row · not-accessible · current An entry contains secure MAC address information for a particular interface. A secure MAC address can be added by the user and can be added when the device learns a new secure MAC address. | ||||
| CdPortSecAddrIfIndex | 1.3.6.1.4.1.171.14.8.1.8.1.1 | InterfaceIndex | NA | |
column · InterfaceIndex · not-accessible · current The ifIndex value of the interface. | ||||
| CdPortSecAddrVlanID | 1.3.6.1.4.1.171.14.8.1.8.1.2 | VlanIdOrNone | NA | |
column · VlanIdOrNone · not-accessible · current This object specifies the VLAN ID where the user-defined secure MAC address is located. If this object is set to 0 at row creation time, the PVID (default port VLAN ID) will be used for the MAC address. | ||||
| CdPortSecAddrMacAddress | 1.3.6.1.4.1.171.14.8.1.8.1.3 | MacAddress | NA | |
column · MacAddress · not-accessible · current This object indicates the secure MAC address to gain port access rights. | ||||
| CdPortSecAddrSecureMode | 1.3.6.1.4.1.171.14.8.1.8.1.4 | INTEGER | RO | |
column · INTEGER · read-only · current Specifies the secure mode. For manually configured secure MAC addresses, the dPortSecAddrSecureMode is permanent.
| ||||
| CdPortSecAddrRemainTime | 1.3.6.1.4.1.171.14.8.1.8.1.5 | INTEGER | RO | |
column · INTEGER · read-only · current Specifies the remaining aging time for the auto-learned dynamic secured address. | ||||
| CdPortSecAddrRowStatus | 1.3.6.1.4.1.171.14.8.1.8.1.99 | RowStatus | RC | |
column · RowStatus · read-create · current The status of this conceptual row. This object is used to create and delete instances of this table. In other words, besides 'permanent' secure MAC address, a 'deleteOnTimeout' address can be cleared by this object. | ||||
| NdPortSecConformance | 1.3.6.1.4.1.171.14.8.2 | |||
| NdPortSecMIBCompliances | 1.3.6.1.4.1.171.14.8.2.1 | |||
| MdPortSecMIBCompliance | 1.3.6.1.4.1.171.14.8.2.1.1 | |||
compliance · current The compliance statement for the Port Security MIB. | ||||
| NdPortSecMIBGroups | 1.3.6.1.4.1.171.14.8.2.2 | |||
| GdPortSecIfCfgGroup | 1.3.6.1.4.1.171.14.8.2.2.1 | |||
group · current A collection of objects for configuring port security feature. | ||||
| GdPortSecIfStatusGroup | 1.3.6.1.4.1.171.14.8.2.2.2 | |||
group · current A collection of objects providing the counter information for the port security feature. | ||||
| GdPortSecAddrGroup | 1.3.6.1.4.1.171.14.8.2.2.3 | |||
group · current A collection of objects providing the address information for the port security feature. | ||||
| GdPortSecAddrNumCtrlGroup | 1.3.6.1.4.1.171.14.8.2.2.4 | |||
group · current A collection of objects provides the configuration of the maximum secure MAC address number on system or VLAN specific. | ||||
| GdPortSecNotifEnableGroup | 1.3.6.1.4.1.171.14.8.2.2.5 | |||
group · current A collection of object(s) that provides control over port security related notification(s). | ||||
| GdPortSecNotifGroup | 1.3.6.1.4.1.171.14.8.2.2.6 | |||
group · current A collection of notifications providing information about address violation.
| ||||
Traps / Notifications
- dPortSecMacAddrViolation
1.3.6.1.4.1.171.14.8.0.1