DLINKSW-NETWORK-ACCESS-MIB
D-Link Systems, Inc.This MIB module defines objects for Network Access Authentication in the system. Network Access Authentication provides generic configurations for authentication methods in the system and manages the failover sequence of these methods in a flexible manner.
snmptranslate -m DLINKSW-NETWORK-ACCESS-MIB -Tpsnmpwalk -v2c -c <community> -m DLINKSW-NETWORK-ACCESS-MIB <host> 1.3.6.1.4.1.171.14.151Imports
| DLINK-ID-REC-MIB | dlinkIndustrialCommon |
|---|---|
| DLINKSW-TC-MIB | Dlink2kVlanList |
| IF-MIB | ifIndex |
| INET-ADDRESS-MIB | InetAddress, InetAddressType |
| Q-BRIDGE-MIB | VlanIdOrNone |
| SNMP-FRAMEWORK-MIB | SnmpAdminString |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | Bits, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso |
| SNMPv2-TC | DisplayString, MacAddress, PhysAddress, RowStatus, TEXTUAL-CONVENTION, TruthValue |
OID tree
| Name | OID | Type | Access | Status |
|---|---|---|---|---|
| IdlinkSwNetworkAccessAuthMIB | 1.3.6.1.4.1.171.14.151 | |||
identity This MIB module defines objects for Network Access Authentication in the system. Network Access Authentication provides generic configurations for authentication methods in the system and manages the failover sequence of these methods in a flexible manner. | ||||
| NdNetAccessAuthMIBNotifications | 1.3.6.1.4.1.171.14.151.0 | |||
| NdNetAccessAuthMIBObjects | 1.3.6.1.4.1.171.14.151.1 | |||
| NdNetAuthSystem | 1.3.6.1.4.1.171.14.151.1.1 | |||
| SdnaMacMoveMode | 1.3.6.1.4.1.171.14.151.1.1.1 | INTEGER | RW | |
scalar · INTEGER · read-write · current This object controls whether to allow authenticated hosts to do
roaming across different switch ports.
deny : When a host is authenticated on one port,
that address is not allowed to move on another
authenticated manager-enabled port of the device.
permit: Authenticated hosts are allowed to move from one
port to another on the same device. When a host moves to
a new port, the authenticated session on the original
port is deleted, and the host is re-authenticated on the
new port.
| ||||
| SdnaAuthorizationEnabled | 1.3.6.1.4.1.171.14.151.1.1.2 | TruthValue | RW | |
scalar · TruthValue · read-write · current This object indicates the state of acceptance of the authorized configuration. When authorization is enabled for authentication, the authorized attributes (for example VLAN, 802.1p default priority, bandwidth, and ACL) will be accepted. | ||||
| SdnaMacFormatCase | 1.3.6.1.4.1.171.14.151.1.1.3 | INTEGER | RW | |
scalar · INTEGER · read-write · current This object indicates the format of the authentication MAC address. uppercase: Using uppercase format, the formatted is: AA-BB-CC-DD-EE-FF. lowercase: Using lowercase format, the formatted is: aa-bb-cc-dd-ee-ff.
| ||||
| SdnaMacFormatDelimiter | 1.3.6.1.4.1.171.14.151.1.1.4 | INTEGER | RW | |
scalar · INTEGER · read-write · current This object indicates the delimiter format of authentication MAC address. none: Not using any delimiter, the format is: AABBCCDDEEFF hyphen: Using '-' as delimiter, the format is: AA-BB-CC-DD-EE-FF colon: Using ':' as delimiter, the format is: AA:BB:CC:DD:EE:FF dot: Using '.' as delimiter, the format is: AA.BB.CC.DD.EE.FF
| ||||
| SdnaMacFormatDelimiterNumber | 1.3.6.1.4.1.171.14.151.1.1.5 | Integer32 (1 | 2 | 5) | RW | |
scalar · Integer32 (1 | 2 | 5) · read-write · current This object indicates the delimiter number of authentication MAC address. 1: single delimiter, the format is: AABBCC.DDEEFF 2: double delimiter, the format is: AABB.CCDD.EEFF 5: multiple delimiter, the format is: AA.BB.CC.DD.EE.FF Note: while dnaMacFormatDelimiter is none(1), the delimiter number will not take effect. | ||||
| NdNetAuthAuthenticator | 1.3.6.1.4.1.171.14.151.1.2 | |||
| SdnaMaxAuthedUserLimit | 1.3.6.1.4.1.171.14.151.1.2.1 | Unsigned32 | RW | |
scalar · Unsigned32 · read-write · current This object indicates the maximum authenticated users of the system. | ||||
| TdnaPortConfigTable | 1.3.6.1.4.1.171.14.151.1.2.2 | NA | ||
table · not-accessible · current This table is a list of configurations for ports. An entry will exist for every interface which supports Network Access Authentication feature. | ||||
| RdnaPortConfigEntry | 1.3.6.1.4.1.171.14.151.1.2.2.1 | NA | ||
row · not-accessible · current An entry contains port-specific configuration for Network Access Authentication.
| ||||
| CdnaPortMaxAuthedUserLimit | 1.3.6.1.4.1.171.14.151.1.2.2.1.1 | Unsigned32 | RW | |
column · Unsigned32 · read-write · current This object indicates the maximum authenticated users of this port. | ||||
| CdnaPortAuthHostMode | 1.3.6.1.4.1.171.14.151.1.2.2.1.2 | DlinkAuthHostMode | RW | |
column · DlinkAuthHostMode · read-write · current This object indicates the authentication host mode of the entry. | ||||
| CdnaPortAuthVlansFirst2K | 1.3.6.1.4.1.171.14.151.1.2.2.1.3 | Dlink2kVlanList | RW | |
column · Dlink2kVlanList · read-write · current This object specifies the authentication VLAN(s) in a string of octets containing one bit per VLAN for VLANs 1 to 2048. If the bit is set to '1', then the VLAN needs authentication. | ||||
| CdnaPortAuthVlansSecond2K | 1.3.6.1.4.1.171.14.151.1.2.2.1.4 | Dlink2kVlanList | RW | |
column · Dlink2kVlanList · read-write · current This object specifies the authentication VLAN(s) in a string of octets containing one bit per VLAN for VLANs 2049 to 4094. If the bit is set to '1', then the VLAN needs authentication. | ||||
| CdnaPortReauthEnabled | 1.3.6.1.4.1.171.14.151.1.2.2.1.5 | TruthValue | RW | |
column · TruthValue · read-write · current This object indicates whether the periodic re-authentication is enabled. | ||||
| CdnaPortReauthInterval | 1.3.6.1.4.1.171.14.151.1.2.2.1.6 | Unsigned32 | RW | |
column · Unsigned32 · read-write · current Specifies the re-authentication interval, after which the port will be re-authenticated if value of the corresponding instance of dnaPortReauthEnabled is 'true'. A value of zero indicates that the re-authentication interval is based on AAA server when this port is authenticated. Besides, the action (re-authenticate or initialize) to take after expiration of the timer is also based on server.
| ||||
| CdnaPortRestartInterval | 1.3.6.1.4.1.171.14.151.1.2.2.1.7 | Unsigned32 (1..65535) | RW | |
column · Unsigned32 (1..65535) · read-write · current Specifies the interval after which a further authentication attempt should be made to this port if it is not authorized.
| ||||
| CdnaPortInactivityTimeout | 1.3.6.1.4.1.171.14.151.1.2.2.1.8 | Integer32 (-1 | 0 | 1..65535) | RW | |
column · Integer32 (-1 | 0 | 1..65535) · read-write · current Specifies the period of time that a client associating with this port is allowed to be inactive before being terminated. A value of zero indicates that inactivity timeout is disabled on this port. A value of -1 indicates that inactivity timeout is based on AAA server when this port is authenticated.
| ||||
| CdnaPortGuestVlanid | 1.3.6.1.4.1.171.14.151.1.2.2.1.9 | VlanIdOrNone | RW | |
column · VlanIdOrNone · read-write · current Specifies the VLAN ID of guest VLAN on the interface. The guest VLAN allows the user access within the guest VLAN before it is authenticated. A value of zero for this object indicates guest VLAN is not configured for the interface. | ||||
| TdnaPortMethodTable | 1.3.6.1.4.1.171.14.151.1.2.3 | NA | ||
table · not-accessible · current The table contains a list of authentication methods information on ports. An entry will exist for every port which supports Network Access Authentication feature. | ||||
| RdnaPortMethodEntry | 1.3.6.1.4.1.171.14.151.1.2.3.1 | NA | ||
row · not-accessible · current An entry contains configuration and information of authentication methods for a particular port.
| ||||
| CdnaPortMethodAvailable | 1.3.6.1.4.1.171.14.151.1.2.3.1.1 | DlinkAuthMethodList | RO | |
column · DlinkAuthMethodList · read-only · current This object indicates the currently effective authentication methods on the port. e.g: The dnaPortMethodCompAuthMode of the interface is set to any(1), but only dot1x is running on this interface, macAuth, webAuth and jwac are disabled, only the bit of dot1x is '1'. | ||||
| CdnaPortMethodCompAuthMode | 1.3.6.1.4.1.171.14.151.1.2.3.1.2 | DlinkCompAuthMode | RW | |
column · DlinkCompAuthMode · read-write · current This object indicates the compound authentication mode on the port. | ||||
| NdNetAuthSession | 1.3.6.1.4.1.171.14.151.1.3 | |||
| TdnaSessionTable | 1.3.6.1.4.1.171.14.151.1.3.1 | NA | ||
table · not-accessible · current The table contains a list of authentication sessions. An entry is created when an authentication session has been successfully created within Network Access Authentication. An entry is deleted when an authentication session has been removed. | ||||
| RdnaSessionEntry | 1.3.6.1.4.1.171.14.151.1.3.1.1 | NA | ||
row · not-accessible · current An entry contains management information for a particular authentication session.
| ||||
| CdnaSessionId | 1.3.6.1.4.1.171.14.151.1.3.1.1.1 | Unsigned32 (0..4294967295) | NA | |
column · Unsigned32 (0..4294967295) · not-accessible · current This object indicates a unique identifier of the authentication session. | ||||
| CdnaSessionClientMacAddress | 1.3.6.1.4.1.171.14.151.1.3.1.1.2 | MacAddress | RO | |
column · MacAddress · read-only · current This object indicates the MAC address of the device associates with the authentication session. | ||||
| CdnaSessionClientAddrType | 1.3.6.1.4.1.171.14.151.1.3.1.1.3 | InetAddressType | RO | |
column · InetAddressType · read-only · current This object indicates the type of Internet address of the client associates with the authentication session. This object is meaningful only when the corresponding dnaSessionAuthorizedBy is webAuth or jwac. | ||||
| CdnaSessionClientAddress | 1.3.6.1.4.1.171.14.151.1.3.1.1.4 | InetAddress | RO | |
column · InetAddress · read-only · current This object indicates the Internet address of the client associates with the authentication session. This object is meaningful only when the corresponding dnaSessionAuthorizedBy is webAuth or jwac. | ||||
| CdnaSessionStatus | 1.3.6.1.4.1.171.14.151.1.3.1.1.5 | INTEGER | RO | |
column · INTEGER · read-only · current This object indicates the current status of the authentication session.
idle : the session has been initialized and no
method has run yet.
authenticating : an authentication method is running for
this session.
noMethod : no authentication method has provided a
result for this session.
authenticationSuccess: an authentication method has resulted
in authentication success for this session.
authenticationFailed: an authentication method has resulted
in authentication failed for this session.
| ||||
| CdnaSessionAuthUserName | 1.3.6.1.4.1.171.14.151.1.3.1.1.6 | SnmpAdminString | RO | |
column · SnmpAdminString · read-only · current This object indicates the user name of the authentication session. This object is meaningless when the corresponding dnaSessionAuthorizedBy is macAuth and a zero length string will be returned. | ||||
| CdnaSessionAuthorizedBy | 1.3.6.1.4.1.171.14.151.1.3.1.1.7 | DlinkAuthMethod | RO | |
column · DlinkAuthMethod · read-only · current This object indicates the method which authorizes the authentication session. | ||||
| CdnaSessionAuthVlan | 1.3.6.1.4.1.171.14.151.1.3.1.1.8 | VlanIdOrNone | RO | |
column · VlanIdOrNone · read-only · current This object indicates the authorized VLAN applied to the authentication session. Value zero indicates that no authorized VLAN has been applied, or it is not applicable. | ||||
| CdnaSessionAccountingID | 1.3.6.1.4.1.171.14.151.1.3.1.1.9 | SnmpAdminString | RO | |
column · SnmpAdminString · read-only · current This object indicates the accounting session ID that using to accounting after authenticated. | ||||
| CdnaSessionAssignVid | 1.3.6.1.4.1.171.14.151.1.3.1.1.10 | VlanIdOrNone | RO | |
column · VlanIdOrNone · read-only · current This object indicates the effectively assigned VLAN ID that are authorized after host pass authenticated. A value of zero indicates that no valid VLAN ID is authorized. | ||||
| CdnaSessionAssignPriority | 1.3.6.1.4.1.171.14.151.1.3.1.1.11 | Integer32 | RO | |
column · Integer32 · read-only · current This object indicates the effectively assigned priority that is authorized after host pass authenticated. A value of -1 indicates that no valid priority is authorized. | ||||
| CdnaSessionAssignIngressBandwidth | 1.3.6.1.4.1.171.14.151.1.3.1.1.12 | Integer32 | RO | |
column · Integer32 · read-only · current This object indicates the effectively assigned ingress bandwidth that is authorized after host pass authenticated. A value of -1 indicates that no valid ingress is authorized. | ||||
| CdnaSessionAssignEgressBandwidth | 1.3.6.1.4.1.171.14.151.1.3.1.1.13 | Integer32 | RO | |
column · Integer32 · read-only · current This object indicates the effectively assigned egress bandwidth that is authorized after host pass authenticated. A value of -1 indicates that no valid egress is authorized. | ||||
| CdnaSessionTimeout | 1.3.6.1.4.1.171.14.151.1.3.1.1.14 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current Indicates the session timeout used by Network Access Authentication for the authentication session.
| ||||
| CdnaSessionTimeLeft | 1.3.6.1.4.1.171.14.151.1.3.1.1.15 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current Indicates the leftover time of the authentication session.
| ||||
| CdnaSessionInactivityTimeout | 1.3.6.1.4.1.171.14.151.1.3.1.1.16 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current Indicates the inactivity timeout used by Network Access Authentication for the authentication session.
| ||||
| CdnaSessionInactivityTimeLeft | 1.3.6.1.4.1.171.14.151.1.3.1.1.17 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current Indicates the leftover time of the inactivity timer of the authentication session.
| ||||
| CdnaSessionTerminateSession | 1.3.6.1.4.1.171.14.151.1.3.1.1.99 | INTEGER | RW | |
column · INTEGER · read-write · current This object terminates the authentication session, when set to 'terminate'. Setting this object to 'false' has no effect. No action is taken if this object is set to 'noOp'. When read, the value 'noOp' is returned.
| ||||
| TdnaSessionMethodInfoTable | 1.3.6.1.4.1.171.14.151.1.3.2 | NA | ||
table · not-accessible · current The table contains a list of authenticating state information of methods for every authentication session. An entry exists for every authentication method that can initiate the authentication session within Network Access Authentication. | ||||
| RdnaSessionMethodInfoEntry | 1.3.6.1.4.1.171.14.151.1.3.2.1 | NA | ||
row · not-accessible · current An entry contains information for a particular effective authentication method which is associated with a session on an interface.
| ||||
| CdnaSessionMethod | 1.3.6.1.4.1.171.14.151.1.3.2.1.1 | DlinkAuthMethod | NA | |
column · DlinkAuthMethod · not-accessible · current Indicates the authentication method of the entry. | ||||
| CdnaSessionMethodState | 1.3.6.1.4.1.171.14.151.1.3.2.1.2 | INTEGER | RO | |
column · INTEGER · read-only · current Indicates the state of this authentication method.
notInitiated : The method hasn't initiated the authentication process
yet.
inProgress : The authentication method is in progress.
authcSuccess: The session has been authenticated by the method.
authcFailed : The session has failed to be authenticated by the method.
| ||||
| TdnaSessionTerminateIfTable | 1.3.6.1.4.1.171.14.151.1.3.3 | NA | ||
table · not-accessible · current The table is used to terminate authentication sessions by interface. | ||||
| RdnaSessionTerminateIfEntry | 1.3.6.1.4.1.171.14.151.1.3.3.1 | NA | ||
row · not-accessible · current An entry is used to terminate authentication sessions by specifying authentication methods per Network Access Authentication managed port.
| ||||
| CdnaSessionTerminateIfMethodList | 1.3.6.1.4.1.171.14.151.1.3.3.1.1 | DlinkAuthMethodList | RW | |
column · DlinkAuthMethodList · read-write · current This object is used to terminate authentication sessions by methods on an interface by setting the corresponding bit to '1'. This object always returns '00'H when read. | ||||
| SdnaSessionTerminateMethod | 1.3.6.1.4.1.171.14.151.1.3.4 | DlinkAuthMethod | RW | |
scalar · DlinkAuthMethod · read-write · current This object is used to terminate the authentication sessions by setting this object to valid value. Setting this object to 'other' has no effect. When read, the value 'other' is returned. | ||||
| SdnaSessionTerminateAll | 1.3.6.1.4.1.171.14.151.1.3.5 | INTEGER | RW | |
scalar · INTEGER · read-write · current This object is used to terminate all authentication sessions by setting this object to 'terminateAll'. Setting this object to 'noOp' has no effect. When read, the value 'noOp' is returned.
| ||||
| NdNetAuthUser | 1.3.6.1.4.1.171.14.151.1.4 | |||
| TdnaUserTable | 1.3.6.1.4.1.171.14.151.1.4.1 | NA | ||
table · not-accessible · current A table contains a list of users in the local database for authentication. | ||||
| RdnaUserEntry | 1.3.6.1.4.1.171.14.151.1.4.1.1 | NA | ||
| CdnaUserName | 1.3.6.1.4.1.171.14.151.1.4.1.1.1 | DisplayString (SIZE (1..32)) | NA | |
column · DisplayString (SIZE (1..32)) · not-accessible · current This object indicates the username for this user account. | ||||
| CdnaUserPassword | 1.3.6.1.4.1.171.14.151.1.4.1.1.2 | DisplayString (SIZE (0..32)) | RC | |
column · DisplayString (SIZE (0..32)) · read-create · current This object indicates the password in clear text form for this user account. When read, a zero length string will be returned for security reasons. | ||||
| CdnaUserTargetVlanid | 1.3.6.1.4.1.171.14.151.1.4.1.1.3 | VlanIdOrNone | RC | |
column · VlanIdOrNone · read-create · current This object indicates the VLAN ID to be assigned for this user account. | ||||
| CdnaUserRowStatus | 1.3.6.1.4.1.171.14.151.1.4.1.1.99 | RowStatus | RC | |
column · RowStatus · read-create · current This object manages this user account. | ||||
| NdNetAccessAuthMIBConformance | 1.3.6.1.4.1.171.14.151.2 | |||
| NdnaMIBCompliances | 1.3.6.1.4.1.171.14.151.2.1 | |||
| MdnaCompliance | 1.3.6.1.4.1.171.14.151.2.1.1 | |||
compliance · current The compliance statement for entities which implement DLINKSW-NETWORK-ACCESS-MIB. | ||||
| NdnaMIBGroups | 1.3.6.1.4.1.171.14.151.2.2 | |||
| GdnaAuthPortConfigGroup | 1.3.6.1.4.1.171.14.151.2.2.1 | |||
group · current A collection of objects that provides port-specific configuration of Network Access Authentication. | ||||
| GdnaPortMethodGroup | 1.3.6.1.4.1.171.14.151.2.2.2 | |||
group · current A collection of objects provides authentication methods configuration for Network Access Authentication. | ||||
| GdnaSessionGroup | 1.3.6.1.4.1.171.14.151.2.2.3 | |||
group · current A collection of objects that provides authentication session management information for Network Access Authentication.
| ||||
| GdnaSessionMethodInfoGroup | 1.3.6.1.4.1.171.14.151.2.2.4 | |||
group · current A collection of objects that provides authentication session state information per authentication methods.
| ||||
| GdnaMacMoveConfigGroup | 1.3.6.1.4.1.171.14.151.2.2.5 | |||
group · current A collection of objects providing MAC move configuration for Network Access Authentication on the device.
| ||||
| GdnaAuthzConfigGroup | 1.3.6.1.4.1.171.14.151.2.2.6 | |||
group · current A collection of objects provides authorization configuration for Network Access Authentication on the device.
| ||||
| GdnaMacFormatGroup | 1.3.6.1.4.1.171.14.151.2.2.7 | |||
group · current A collection of objects provides MAC format configuration for Network Access Authentication on the device. | ||||
| GdnaMaxAuthedUserLimitGroup | 1.3.6.1.4.1.171.14.151.2.2.8 | |||
group · current A collection of objects provides configuration of upper limits for authenticated user. | ||||
| GdnaGuestVlanGroup | 1.3.6.1.4.1.171.14.151.2.2.9 | |||
group · current A collection of objects providing guest VLAN configuration for Network Access Authentication on the device.
| ||||
| GdnaAuthenticationVlanGroup | 1.3.6.1.4.1.171.14.151.2.2.10 | |||
group · current A collection of objects provides for the platform which supports the feature of per VLAN authentication. | ||||
| GdnaSessionTerminateGroup | 1.3.6.1.4.1.171.14.151.2.2.11 | |||
group · current A collection of objects providing terminate authentication session information for Network Access Authentication on the device. | ||||
| GdnaAccountUserGroup | 1.3.6.1.4.1.171.14.151.2.2.12 | |||
group · current A collection of objects providing local account information for Network Access Authentication on the device. | ||||
Textual conventions
DlinkAuthHostModeINTEGERmultiAuth(2)multiHost(1)The authentication mode of a controlled port. multiHost : If a port is operated in multi-host mode, once a host is authenticated, all remaining hosts are also authenticated in a single domain. multiAuth : If a port is operated in multi-auth mode, each host is authenticated separately in a single domain.DlinkAuthMethodINTEGERdot1x(2)jwac(5)macAuth(3)other(1)webAuth(4)The authentication methods and protocols supported in Network Access Authentication. other : other methods no defined here. 'other' is a read-only value and cannot be used in set operation. dot1x : 802.1X Protocol. macAuth : MAC-based Access Control. webAuth : Web-based Access Control. jwac : Japanese Web Authentication.DlinkAuthMethodListBitsdot1x(0)jwac(3)macAuth(1)webAuth(2)The authentication methods being used by Network Access Authentication. This object is a bit map, with each bit representing a different authentication type as identified below. A 1-bit indicates the authentication method is used. A 0-bit indicates the authentication method is not used. dot1x : 802.1X Protocol. macAuth : MAC-based Access Control. webAuth : Web-based Access Control. jwac : Japanese Web Authentication.
DlinkCompAuthModeINTEGERany(1)macJwac(2)macWac(3)The compound authentication mode of a controlled port. any : The host needs pass one of the authentication methods (802.1X, MAC-based Access Control, WAC and JWAC). macJwac : MAC-based Access Control will be verified first. If a client passed MAC authentication, JWAC will be verified. The host needs pass both authentication methods. macWac : MAC-based Access Control will be verified first. If a client passed MAC authentication, WAC will be verified. The host needs pass both authentication methods.