DLINKSW-LBD-MIB
D-Link Systems, Inc.This MIB module defines objects for loopback detection.
snmptranslate -m DLINKSW-LBD-MIB -Tpsnmpwalk -v2c -c <community> -m DLINKSW-LBD-MIB <host> 1.3.6.1.4.1.171.14.46Imports
| DLINK-ID-REC-MIB | dlinkIndustrialCommon |
|---|---|
| DLINKSW-TC-MIB | Dlink2kVlanList |
| IF-MIB | InterfaceIndex |
| Q-BRIDGE-MIB | VlanId |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | Bits, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso |
| SNMPv2-TC | DisplayString, PhysAddress, TEXTUAL-CONVENTION, TruthValue |
OID tree
| Name | OID | Type | Access | Status |
|---|---|---|---|---|
| IdlinkSwLoopbackDetectMIB | 1.3.6.1.4.1.171.14.46 | |||
identity This MIB module defines objects for loopback detection. | ||||
| NdLbdNotifications | 1.3.6.1.4.1.171.14.46.0 | |||
| !dLbdLoopOccurred | 1.3.6.1.4.1.171.14.46.0.1 | |||
| !dLbdLoopRestart | 1.3.6.1.4.1.171.14.46.0.2 | |||
notification · current This trap is sent when an interface loop restarts after the interval time.
| ||||
| !dLbdVlanLoopOccurred | 1.3.6.1.4.1.171.14.46.0.3 | |||
notification · current This trap is sent when an interface with a VID loop occurs. | ||||
| !dLbdVlanLoopRestart | 1.3.6.1.4.1.171.14.46.0.4 | |||
notification · current This trap is sent when an interface loop with a VID restarts after the interval time. | ||||
| NdLbdObjects | 1.3.6.1.4.1.171.14.46.1 | |||
| SdLbdCtrlInterval | 1.3.6.1.4.1.171.14.46.1.1 | INTEGER (1..32767) | RW | |
scalar · INTEGER (1..32767) · read-write · current This object indicates the interval in seconds at which LBD packets are transmitted.
| ||||
| SdLbdCtrlGlobalEnabled | 1.3.6.1.4.1.171.14.46.1.2 | TruthValue | RW | |
scalar · TruthValue · read-write · current This object indicates whether the loopback detection is enabled globally. | ||||
| SdLbdCtrlMode | 1.3.6.1.4.1.171.14.46.1.3 | INTEGER | RW | |
scalar · INTEGER · read-write · current This object indicates the loopback detection mode. portBased(1) - The loopback detection works in port-based mode. vlanBased(2) - The loopback detection works in vlan-based mode.
| ||||
| TdLbdIfCfgTable | 1.3.6.1.4.1.171.14.46.1.4 | NA | ||
table · not-accessible · current A list of loopback detection information entries. | ||||
| RdLbdIfCfgEntry | 1.3.6.1.4.1.171.14.46.1.4.1 | NA | ||
row · not-accessible · current An entry indicates the setting of loopback detection on an interface.
| ||||
| CdLbdIfCfgIndex | 1.3.6.1.4.1.171.14.46.1.4.1.1 | InterfaceIndex | NA | |
column · InterfaceIndex · not-accessible · current This object indicates the ifIndex of the physical port or port channel. | ||||
| CdLbdIfCfgEnabled | 1.3.6.1.4.1.171.14.46.1.4.1.2 | TruthValue | RW | |
column · TruthValue · read-write · current This object indicates whether the loopback detection is enabled on the interface. | ||||
| CdLbdIfLoopStatus | 1.3.6.1.4.1.171.14.46.1.4.1.3 | INTEGER | RO | |
column · INTEGER · read-only · current This object indicates whether the interface loopback status.
| ||||
| CdLbdIfLoopVlans | 1.3.6.1.4.1.171.14.46.1.4.1.4 | DisplayString | RO | |
column · DisplayString · read-only · current This object indicates the VLAN list that has detected a loopback. | ||||
| NdLbdVlanCtrlObjects | 1.3.6.1.4.1.171.14.46.1.5 | |||
node · current This identifier defines a subtree under which a set of objects are defined to enable loopback detection on specific VLANs. That is, LBD Control packet will be sent out for the VLAN that the port has the membership and within the specified VLAN list (the correspondig bit is '1'). When enabled VLAN ID list is empty, that is both dLbdVlanCrlFirst2K and dLbdVlanCrlSecond2K are zero lenth string, LBD Control packet is sent out for all VLANs that the port has the membership. | ||||
| SdLbdVlanCrlFirst2K | 1.3.6.1.4.1.171.14.46.1.5.1 | Dlink2kVlanList | RW | |
scalar · Dlink2kVlanList · read-write · current This object specifies the loopback detection enabled VLAN in a string of octets containing one bit per VLAN for VLANs 1 to 2048. If the bit is set to '1', then the VLAN is enabled for loopback detection. | ||||
| SdLbdVlanCrlSecond2K | 1.3.6.1.4.1.171.14.46.1.5.2 | Dlink2kVlanList | RW | |
scalar · Dlink2kVlanList · read-write · current This object specifies the loopback detection enabled VLAN in a string of octets containing one bit per VLAN for VLANs 2049 to 4095. If the bit is set to '1', then the VLAN is enabled for loopback detection. | ||||
| SdLbdActMode | 1.3.6.1.4.1.171.14.46.1.6 | INTEGER | RW | |
scalar · INTEGER · read-write · current This object indicates the loopback detection action mode. shundown(1) - When loop has been detected, the port will be shut down (disabled) in port-based mode, the traffic will be block on specific VLAN in VLAN-based mode. This is the default value. none(2) - When loop has been detected, the port will NOT be disabled in port-based mode, the traffic will NOT be block on specific VLAN in VLAN-based mode. Just send log and trap.
| ||||
| SdLbdNotifyEnabled | 1.3.6.1.4.1.171.14.46.1.7 | TruthValue | RW | |
scalar · TruthValue · read-write · current Set to 'true' to enable global SNMP notification for loopback detection feature. Setting the object to 'false' will disable SNMP notifications. | ||||
| NdLbdNotifyInfo | 1.3.6.1.4.1.171.14.46.1.8 | |||
node · current This identifier is a group for variable bindings for traps. | ||||
| SdLbdNotifyInfoIfIndex | 1.3.6.1.4.1.171.14.46.1.8.1 | InterfaceIndex | AN | |
scalar · InterfaceIndex · accessible-for-notify · current This object indicates the interface id that has detected a loopback. | ||||
| SdLbdNotifyInfoVlanId | 1.3.6.1.4.1.171.14.46.1.8.2 | VlanId | AN | |
scalar · VlanId · accessible-for-notify · current This object indicates the vlan id that has detected a loopback. | ||||
| SdLbdAddressType | 1.3.6.1.4.1.171.14.46.1.9 | INTEGER | RW | |
scalar · INTEGER · read-write · current This object indicates the CTP packet's DA type. multicast(1) - Only multicast CTP packet will be sent.The CTP packet's DA is CF-00-00-00-00-00. broadcast(2) - Only broadcast CTP packet will be sent.The CTP packet's DA is FF-FF-FF-FF-FF-FF.
| ||||
| NdLbdConformance | 1.3.6.1.4.1.171.14.46.2 | |||
| NdLbdMIBCompliances | 1.3.6.1.4.1.171.14.46.2.1 | |||
| MdLbdMIBCompliance | 1.3.6.1.4.1.171.14.46.2.1.1 | |||
compliance · current The compliance statement for entities which implement the DLINKSW-LBD-MIB. | ||||
| NdLbdMIBGroups | 1.3.6.1.4.1.171.14.46.2.2 | |||
| GdLbdCfgGroup | 1.3.6.1.4.1.171.14.46.2.2.1 | |||
group · current A collection of objects providing management of the loopback detection feature. | ||||
| GdLbdIfCfgGroup | 1.3.6.1.4.1.171.14.46.2.2.2 | |||
group · current A collection of objects providing the per-interface control of loopback detection. | ||||
| GdLbdCtrlModeGroup | 1.3.6.1.4.1.171.14.46.2.2.3 | |||
| GdLbdVlanCtrlGroup | 1.3.6.1.4.1.171.14.46.2.2.4 | |||
group · current A collection of objects providing the VLAN list of loopback detection. | ||||
| GdLbdNotificationGroup | 1.3.6.1.4.1.171.14.46.2.2.5 | |||
group · current A collection of notifications used for monitoring the hosts under the control of loopback detection. | ||||
Traps / Notifications
- dLbdLoopOccurred
1.3.6.1.4.1.171.14.46.0.1 - dLbdLoopRestart
1.3.6.1.4.1.171.14.46.0.2 - dLbdVlanLoopOccurred
1.3.6.1.4.1.171.14.46.0.3 - dLbdVlanLoopRestart
1.3.6.1.4.1.171.14.46.0.4