DLINKSW-CABLE-DIAG-MIB
D-Link Systems, Inc.The MIB module for determining the status of the cables attached to the device.
snmptranslate -m DLINKSW-CABLE-DIAG-MIB -Tpsnmpwalk -v2c -c <community> -m DLINKSW-CABLE-DIAG-MIB <host> 1.3.6.1.4.1.171.14.58Imports
| DLINK-ID-REC-MIB | dlinkIndustrialCommon |
|---|---|
| IF-MIB | ifIndex |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | Bits, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso |
| SNMPv2-TC | DisplayString, PhysAddress, TEXTUAL-CONVENTION |
OID tree
| Name | OID | Type | Access | Status |
|---|---|---|---|---|
| IdlinkSwCableDiagMIB | 1.3.6.1.4.1.171.14.58 | |||
identity The MIB module for determining the status of the cables attached to the device. | ||||
| NdCableDiagNotifications | 1.3.6.1.4.1.171.14.58.0 | |||
| NdCableDiagObjects | 1.3.6.1.4.1.171.14.58.1 | |||
| TdCableDiagIfTable | 1.3.6.1.4.1.171.14.58.1.1 | NA | ||
table · not-accessible · current A table contains a list of information about test on the device's interfaces. Note that entries will exist in this table when the corresponding interface is capable to run test. | ||||
| RdCableDiagIfEntry | 1.3.6.1.4.1.171.14.58.1.1.1 | NA | ||
row · not-accessible · current An entry in the dCableDiagIfTable, contains the testing controls on an interface.
| ||||
| CdCableDiagIfAction | 1.3.6.1.4.1.171.14.58.1.1.1.1 | INTEGER | RW | |
column · INTEGER · read-write · current This object control the action to be executed on the interface.
noOp(1) - No action is taken if this object is set to 'noOp'.
When read, the value 'noOp' is returned.
test(2) - Start the test on the interface.
clear(3) - Clear all the test results on the interface.
The value of the following objects of the entry will
become 'other'.
-- dCableDiagResultPair1Status
-- dCableDiagResultPair2Status
-- dCableDiagResultPair3Status
-- dCableDiagResultPair4Status
The value of the following objects of the entry will
become -1 (unavailable)
-- dCableDiagResultPair1Length
-- dCableDiagResultPair2Length
-- dCableDiagResultPair3Length
-- dCableDiagResultPair4Length
The value of dCableDiagResultStatus of the entry will
become 'notRun'.
| ||||
| TdCableDiagResultTable | 1.3.6.1.4.1.171.14.58.1.2 | NA | ||
table · not-accessible · current A table contains a list of interface's cable situation. Note that entries will exist in this table when the corresponding interface is a copper Ethernet port. | ||||
| RdCableDiagResultEntry | 1.3.6.1.4.1.171.14.58.1.2.1 | NA | ||
row · not-accessible · current An entry in dCableDiagResultTable contains cable situation of an interface.
| ||||
| CdCableDiagResultPair1Status | 1.3.6.1.4.1.171.14.58.1.2.1.1 | DlinkCableDiagStatus | RO | |
column · DlinkCableDiagStatus · read-only · current This object indicates the status of pair 1 of the cable. | ||||
| CdCableDiagResultPair2Status | 1.3.6.1.4.1.171.14.58.1.2.1.2 | DlinkCableDiagStatus | RO | |
column · DlinkCableDiagStatus · read-only · current This object indicates the status of pair 2 of the cable. | ||||
| CdCableDiagResultPair3Status | 1.3.6.1.4.1.171.14.58.1.2.1.3 | DlinkCableDiagStatus | RO | |
column · DlinkCableDiagStatus · read-only · current This object indicates the status of pair 3 of the cable. | ||||
| CdCableDiagResultPair4Status | 1.3.6.1.4.1.171.14.58.1.2.1.4 | DlinkCableDiagStatus | RO | |
column · DlinkCableDiagStatus · read-only · current This object indicates the status of pair 4 of the cable. | ||||
| CdCableDiagResultPair1Length | 1.3.6.1.4.1.171.14.58.1.2.1.5 | Integer32 | RO | |
column · Integer32 · read-only · current This object indicates the approximate length or length to the failure of pair 1 of the cable. This value is in meter units. The special value of -1 indicates the length is unavailable.
| ||||
| CdCableDiagResultPair2Length | 1.3.6.1.4.1.171.14.58.1.2.1.6 | Integer32 | RO | |
column · Integer32 · read-only · current This object indicates the approximate length or length to the failure of pair 2 of the cable. This value is in meter units. The special value of -1 indicates the length is unavailable.
| ||||
| CdCableDiagResultPair3Length | 1.3.6.1.4.1.171.14.58.1.2.1.7 | Integer32 | RO | |
column · Integer32 · read-only · current This object indicates the approximate length or length to the failure of pair 3 of the cable. This value is in meter units. The special value of -1 indicates the length is unavailable.
| ||||
| CdCableDiagResultPair4Length | 1.3.6.1.4.1.171.14.58.1.2.1.8 | Integer32 | RO | |
column · Integer32 · read-only · current This object indicates the approximate length or length to the failure of pair 4 of the cable. This value is in meter units. The special value of -1 indicates the length is unavailable.
| ||||
| CdCableDiagResultStatus | 1.3.6.1.4.1.171.14.58.1.2.1.9 | INTEGER | RO | |
column · INTEGER · read-only · current Indicates the status of cable diagnostics on the interface.
notRun(0) - the cable diagnostics has never been run for this
interface or the previous result is cleared.
processing(1) - the cable diagnostics is currently running on the
interface.
lastTestOk(2) - the last cable diagnostics was performed successfully
on the interface.
lastTestFailed(3) - the last cable diagnostics failed on the interface.
| ||||
| NdCableDiagConformance | 1.3.6.1.4.1.171.14.58.2 | |||
| NdCableDiagCompliances | 1.3.6.1.4.1.171.14.58.2.1 | |||
| MdCableDiagCompliance | 1.3.6.1.4.1.171.14.58.2.1.1 | |||
compliance · current The compliance statement for entities which implement the DLINKSW-CABLE-DIAG-MIB.
| ||||
| NdCableDiagGroups | 1.3.6.1.4.1.171.14.58.2.1.2 | |||
| GdCableDiagBasicGroup | 1.3.6.1.4.1.171.14.58.2.1.2.1 | |||
group · current This group contains the collection of objects related to configuration and information of fundamental cable diagnostics feature. | ||||
Textual conventions
DlinkCableDiagStatusINTEGERcrosstalk(5)noCable(7)ok(1)open(2)openOrShort(4)other(0)short(3)shutdown(8)unKnown(6)The status of a pair of the cable. other(0) - Other status is not specified here. E.g. the diagnostics has never been performed, or the previous result is cleared. ok(1) - The pair or cable has no error. open(2) - The cable in the error pair does not have a connection at the specified position. short(3) - The cable in the error pair has a short problem at the specified position. openOrShort(4) - The PHY has no capability to distinguish between open and short state. crosstalk(5)- The cable in the error pair has a crosstalk problem at the specified position. unKnown(6) - The diagnostics got an unknown status. noCable(7) - The port does not have any cable connection to the remote partner. shutdown(8)- The remote partner is powered off.