IDKT-F2-MIB
DKT A/SDKT 797xx series MIB.
snmptranslate -m IDKT-F2-MIB -Tpsnmpwalk -v2c -c <community> -m IDKT-F2-MIB <host> 1.3.6.1.4.1.27304.15Imports
| DKT-MIB | dkt |
|---|---|
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | Bits, Counter32, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso |
| SNMPv2-TC | DisplayString, MacAddress, PhysAddress, TEXTUAL-CONVENTION |
OID tree
| Name | OID | Type | Access | Status |
|---|---|---|---|---|
| If2MIB | 1.3.6.1.4.1.27304.15 | |||
identity DKT 797xx series MIB. | ||||
| Nf2SwitchEngine | 1.3.6.1.4.1.27304.15.1 | |||
| Sf2IGMPSnooping | 1.3.6.1.4.1.27304.15.1.1 | INTEGER (0..1) | RW | |
scalar · INTEGER (0..1) · read-write · current Starts/stops IGMP snooping, input parameter 0 = stops IGMP snooping, 1 = starts IGMP snooping. Per Default IGMP snooping is disabled. | ||||
| Sf2MTU | 1.3.6.1.4.1.27304.15.1.2 | INTEGER (0..8960) | RW | |
scalar · INTEGER (0..8960) · read-write · current Set and get MTU. The following values are valid: 3072, 4096, 6144, 8960 (3k, 4k, 6k and 8960 bytes) | ||||
| Tf2FWDTable | 1.3.6.1.4.1.27304.15.1.3 | NA | ||
table · not-accessible · current Get learned MAC addresses from LAN side of switch engine | ||||
| Rf2FWDMacAddressEntry | 1.3.6.1.4.1.27304.15.1.3.1 | NA | ||
row · not-accessible · current Learned MAC address from LAN side of switch engine | ||||
| CF2FWDMacAddress | 1.3.6.1.4.1.27304.15.1.3.1.1 | MacAddress | RO | |
column · MacAddress · read-only · current MAC address from LAN | ||||
| Nf2Ports | 1.3.6.1.4.1.27304.15.2 | |||
| Nf2CPUPort | 1.3.6.1.4.1.27304.15.2.1 | |||
| Sf2CPUPortAutoNegotiation | 1.3.6.1.4.1.27304.15.2.1.1 | INTEGER (0..10) | RO | |
scalar · INTEGER (0..10) · read-only · current Displays auto negotiation state for the port. | ||||
| Sf2CPUPortSpeedMode | 1.3.6.1.4.1.27304.15.2.1.2 | OCTET STRING (SIZE (0..10)) | RO | |
scalar · OCTET STRING (SIZE (0..10)) · read-only · current Displays the speed and duplex mode on the port. | ||||
| Sf2CPUPortLinkStatus | 1.3.6.1.4.1.27304.15.2.1.3 | INTEGER (0..1) | RO | |
scalar · INTEGER (0..1) · read-only · current Displays the Link status for the port | ||||
| Sf2CPUPortFlowControl | 1.3.6.1.4.1.27304.15.2.1.4 | INTEGER (0..1) | RO | |
scalar · INTEGER (0..1) · read-only · current Displays flow control status for the port. Values: 0: No flow control, 1: Rx flow control, 2: Tx flow control, 3: Rx and Tx flow control | ||||
| Sf2CPUPortEnable | 1.3.6.1.4.1.27304.15.2.1.5 | INTEGER (0..1) | RO | |
scalar · INTEGER (0..1) · read-only · current Status for CPU port. Always 1 for enabled. | ||||
| Nf2WANPort | 1.3.6.1.4.1.27304.15.2.2 | |||
| Sf2WANPortAutoNegotiation | 1.3.6.1.4.1.27304.15.2.2.1 | INTEGER (0..10) | RO | |
scalar · INTEGER (0..10) · read-only · current Displays auto negotiation state for the port. | ||||
| Sf2WANPortSpeedMode | 1.3.6.1.4.1.27304.15.2.2.2 | OCTET STRING (SIZE (0..10)) | RO | |
scalar · OCTET STRING (SIZE (0..10)) · read-only · current Displays the speed and duplex mode on the port. Valid values are (1000FD|1000HD|100FD|100HD) | ||||
| Sf2WANPortLinkStatus | 1.3.6.1.4.1.27304.15.2.2.3 | INTEGER (0..1) | RO | |
scalar · INTEGER (0..1) · read-only · current Displays the Link status for the port | ||||
| Sf2WANPortFlowControl | 1.3.6.1.4.1.27304.15.2.2.4 | INTEGER (0..1) | RO | |
scalar · INTEGER (0..1) · read-only · current Displays flow control status for the port. Values: 0: No flow control, 1: Rx flow control, 2: Tx flow control, 3: Rx and Tx flow control | ||||
| Sf2WANPortEnable | 1.3.6.1.4.1.27304.15.2.2.5 | INTEGER (0..1) | RO | |
scalar · INTEGER (0..1) · read-only · current Status for WAN port. Always 1 for enabled. | ||||
| Nf2LAN1Port | 1.3.6.1.4.1.27304.15.2.3 | |||
| Sf2LAN1PortAutoNegotiation | 1.3.6.1.4.1.27304.15.2.3.1 | INTEGER (0..1) | RO | |
scalar · INTEGER (0..1) · read-only · current Displays auto negotiation state for the port. | ||||
| Sf2LAN1PortSpeedMode | 1.3.6.1.4.1.27304.15.2.3.2 | OCTET STRING (SIZE (0..10)) | RO | |
scalar · OCTET STRING (SIZE (0..10)) · read-only · current Displays the speed and duplex mode on the port. Valid values are (1000FD|1000HD|100FD|100HD) | ||||
| Sf2LAN1PortLinkStatus | 1.3.6.1.4.1.27304.15.2.3.3 | INTEGER (0..1) | RO | |
scalar · INTEGER (0..1) · read-only · current Displays the Link status for the port | ||||
| Sf2LAN1PortFlowControl | 1.3.6.1.4.1.27304.15.2.3.4 | INTEGER (0..1) | RO | |
scalar · INTEGER (0..1) · read-only · current Displays flow control status for the port. Values: 0: No flow control, 1: Rx flow control, 2: Tx flow control, 3: Rx and Tx flow control | ||||
| Sf2LAN1PortEnable | 1.3.6.1.4.1.27304.15.2.3.5 | INTEGER (0..1) | RW | |
scalar · INTEGER (0..1) · read-write · current Enables/Disables LAN1 port. Set to 1 for Enabled set to 0 for Disabled. | ||||
| Nf2LAN2Port | 1.3.6.1.4.1.27304.15.2.4 | |||
| Sf2LAN2PortAutoNegotiation | 1.3.6.1.4.1.27304.15.2.4.1 | INTEGER (0..1) | RO | |
scalar · INTEGER (0..1) · read-only · current Displays auto negotiation state for the port. | ||||
| Sf2LAN2PortSpeedMode | 1.3.6.1.4.1.27304.15.2.4.2 | OCTET STRING (SIZE (0..10)) | RO | |
scalar · OCTET STRING (SIZE (0..10)) · read-only · current Displays the speed and duplex mode on the port. Valid values are (1000FD|1000HD|100FD|100HD) | ||||
| Sf2LAN2PortLinkStatus | 1.3.6.1.4.1.27304.15.2.4.3 | INTEGER (0..1) | RO | |
scalar · INTEGER (0..1) · read-only · current Displays the Link status for the port | ||||
| Sf2LAN2PortFlowControl | 1.3.6.1.4.1.27304.15.2.4.4 | INTEGER (0..1) | RO | |
scalar · INTEGER (0..1) · read-only · current Displays flow control status for the port. Values: 0: No flow control, 1: Rx flow control, 2: Tx flow control, 3: Rx and Tx flow control | ||||
| Sf2LAN2PortEnable | 1.3.6.1.4.1.27304.15.2.4.5 | INTEGER (0..1) | RW | |
scalar · INTEGER (0..1) · read-write · current Enables/Disables LAN2 port. Set to 1 for Enabled set to 0 for Disabled. | ||||
| Nf2LAN3Port | 1.3.6.1.4.1.27304.15.2.5 | |||
| Sf2LAN3PortAutoNegotiation | 1.3.6.1.4.1.27304.15.2.5.1 | INTEGER (0..1) | RO | |
scalar · INTEGER (0..1) · read-only · current Displays auto negotiation state for the port. | ||||
| Sf2LAN3PortSpeedMode | 1.3.6.1.4.1.27304.15.2.5.2 | OCTET STRING (SIZE (0..10)) | RO | |
scalar · OCTET STRING (SIZE (0..10)) · read-only · current Displays the speed and duplex mode on the port. Valid values are (1000FD|1000HD|100FD|100HD) | ||||
| Sf2LAN3PortLinkStatus | 1.3.6.1.4.1.27304.15.2.5.3 | INTEGER (0..1) | RO | |
scalar · INTEGER (0..1) · read-only · current Displays the Link status for the port | ||||
| Sf2LAN3PortFlowControl | 1.3.6.1.4.1.27304.15.2.5.4 | INTEGER (0..1) | RO | |
scalar · INTEGER (0..1) · read-only · current Displays flow control status for the port. Values: 0: No flow control, 1: Rx flow control, 2: Tx flow control, 3: Rx and Tx flow control | ||||
| Sf2LAN3PortEnable | 1.3.6.1.4.1.27304.15.2.5.5 | INTEGER (0..1) | RW | |
scalar · INTEGER (0..1) · read-write · current Enables/Disables LAN3 port. Set to 1 for Enabled set to 0 for Disabled. | ||||
| Nf2LAN4Port | 1.3.6.1.4.1.27304.15.2.6 | |||
| Sf2LAN4PortAutoNegotiation | 1.3.6.1.4.1.27304.15.2.6.1 | INTEGER (0..1) | RO | |
scalar · INTEGER (0..1) · read-only · current Displays auto negotiation state for the port. | ||||
| Sf2LAN4PortSpeedMode | 1.3.6.1.4.1.27304.15.2.6.2 | OCTET STRING (SIZE (0..10)) | RO | |
scalar · OCTET STRING (SIZE (0..10)) · read-only · current Displays the speed and duplex mode on the port. Valid values are (1000FD|1000HD|100FD|100HD) | ||||
| Sf2LAN4PortLinkStatus | 1.3.6.1.4.1.27304.15.2.6.3 | INTEGER (0..1) | RO | |
scalar · INTEGER (0..1) · read-only · current Displays the Link status for the port | ||||
| Sf2LAN4PortFlowControl | 1.3.6.1.4.1.27304.15.2.6.4 | INTEGER (0..1) | RO | |
scalar · INTEGER (0..1) · read-only · current Displays flow control status for the port. Values: 0: No flow control, 1: Rx flow control, 2: Tx flow control, 3: Rx and Tx flow control | ||||
| Sf2LAN4PortEnable | 1.3.6.1.4.1.27304.15.2.6.5 | INTEGER (0..1) | RW | |
scalar · INTEGER (0..1) · read-write · current Enables/Disables LAN4 port. Set to 1 for Enabled set to 0 for Disabled. | ||||
| Gf2ModuleGroup | 1.3.6.1.4.1.27304.15.3 | |||
group · current The objects are related to the DKT 797xx series module, MIB rev 09.
| ||||