DKT-GE-MIB
DKT A/SDKT Gigabit MIB.
snmptranslate -m DKT-GE-MIB -Tpsnmpwalk -v2c -c <community> -m DKT-GE-MIB <host> 1.3.6.1.4.1.27304.14Imports
| DKT-MIB | dkt |
|---|---|
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | Bits, Counter32, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso |
| SNMPv2-TC | DisplayString, PhysAddress, TEXTUAL-CONVENTION |
OID tree
| Name | OID | Type | Access | Status |
|---|---|---|---|---|
| IgeMIB | 1.3.6.1.4.1.27304.14 | |||
identity DKT Gigabit MIB. | ||||
| NgeSwitchEngine | 1.3.6.1.4.1.27304.14.1 | |||
| SgeATU | 1.3.6.1.4.1.27304.14.1.1 | OCTET STRING (SIZE (0..20480)) | RO | |
scalar · OCTET STRING (SIZE (0..20480)) · read-only · current Dumps the Address Translation Unit (ATU) Switch table in semi colon format | ||||
| SgeUnicastDelete | 1.3.6.1.4.1.27304.14.1.2 | OCTET STRING (SIZE (0..100)) | WO | |
scalar · OCTET STRING (SIZE (0..100)) · write-only · current Removes a unicast MAC address from the Address Translation Unit (ATU) Switch table. | ||||
| SgeMulticastDelete | 1.3.6.1.4.1.27304.14.1.3 | IpAddress | WO | |
scalar · IpAddress · write-only · current Removes a multicast IP address from the Address Translation Unit (ATU) Switch table. | ||||
| SgeIGMPSnooping | 1.3.6.1.4.1.27304.14.1.4 | INTEGER (0..1) | RW | |
scalar · INTEGER (0..1) · read-write · current Starts/stops IGMP snooping, input parameter 0 = stops IGMP snooping, 1 = starts IGMP snooping. Per Default IGMP snooping is enabled, but has to be configured per port | ||||
| SgeVTU | 1.3.6.1.4.1.27304.14.1.5 | OCTET STRING (SIZE (0..9600)) | RO | |
scalar · OCTET STRING (SIZE (0..9600)) · read-only · current Dumps the VLAN Table Unit (VTU) Switch table in semi colon format | ||||
| SgeVLANCreate | 1.3.6.1.4.1.27304.14.1.6 | OCTET STRING (SIZE (0..100)) | WO | |
scalar · OCTET STRING (SIZE (0..100)) · write-only · current Creates a VLAN, input parameters are: VID:WAN:LAN1:LAN2:LAN3:LAN4:CPU:NRL-ENABLE | ||||
| SgeVLANDelete | 1.3.6.1.4.1.27304.14.1.7 | INTEGER (0..4095) | WO | |
scalar · INTEGER (0..4095) · write-only · current Deletes a VLAN, input parameter is VLAN VID: 0 - 4095 | ||||
| SgeClearVTU | 1.3.6.1.4.1.27304.14.1.8 | INTEGER (1) | WO | |
scalar · INTEGER (1) · write-only · current Clears the VLAN Table Unit (VTU) Switch table, input parameter 1 = clear VTU table | ||||
| SgeDumpPIRLBuckets | 1.3.6.1.4.1.27304.14.1.9 | OCTET STRING (SIZE (0..10)) | RO | |
scalar · OCTET STRING (SIZE (0..10)) · read-only · current Dumps a list of the active buckets. | ||||
| SgeVLANProviderMode | 1.3.6.1.4.1.27304.14.1.10 | INTEGER (0..1) | RW | |
scalar · INTEGER (0..1) · read-write · current Enable/disable VLAN provider mode, input parameter 0 = disable VLAN provider mode, 1 = enable VLAN provider mode. Per Default VLAN provider mode is disabled. NOTE: Provider VLAN ID should be setup in port default VID for the originating port. | ||||
| NgePorts | 1.3.6.1.4.1.27304.14.2 | |||
| NgeCPUPort | 1.3.6.1.4.1.27304.14.2.1 | |||
| SgeCPUPortAutoNegotiation | 1.3.6.1.4.1.27304.14.2.1.1 | INTEGER (0..10) | RW | |
scalar · INTEGER (0..10) · read-write · current Enables/disables auto negotiation on the port. Set to 1 for enable and 0 for disable. | ||||
| SgeCPUPortSpeedMode | 1.3.6.1.4.1.27304.14.2.1.2 | OCTET STRING (SIZE (0..10)) | RW | |
scalar · OCTET STRING (SIZE (0..10)) · read-write · current Sets/gets the speed and duplex mode on the port. Input parameters are: AUTO | ||||
| SgeCPUPortLinkStatus | 1.3.6.1.4.1.27304.14.2.1.3 | INTEGER (0..1) | RO | |
scalar · INTEGER (0..1) · read-only · current Gets the Link status for the port | ||||
| SgeCPUPortFlowControl | 1.3.6.1.4.1.27304.14.2.1.4 | INTEGER (0..1) | RW | |
scalar · INTEGER (0..1) · read-write · current Enables/disables flow control on the port. Set to 1 for enable and 0 for disable. | ||||
| SgeCPUPortIEEEQoSPriority | 1.3.6.1.4.1.27304.14.2.1.5 | INTEGER (0..1) | RW | |
scalar · INTEGER (0..1) · read-write · current Enables prioritized frames based on there IEEE priority tags. Set to 1 for enable and 0 for disable. | ||||
| SgeCPUPortIPQoSPriority | 1.3.6.1.4.1.27304.14.2.1.6 | INTEGER (0..1) | RW | |
scalar · INTEGER (0..1) · read-write · current Enables prioritized frames based on their IP4/IP6 priority fields. Set to 1 for enable and 0 for disable. | ||||
| SgeCPUPortQoSPortMapRule | 1.3.6.1.4.1.27304.14.2.1.7 | INTEGER (0..1) | RW | |
scalar · INTEGER (0..1) · read-write · current Forces queue priority for a port. Set to 1 for enable and 0 for disable. | ||||
| SgeCPUPortVIDNRLEnable | 1.3.6.1.4.1.27304.14.2.1.8 | INTEGER (0..1) | RW | |
scalar · INTEGER (0..1) · read-write · current Enables/disables per port the Non rate limit for VLANs with the NRL bit enabled. Set to 1 for enable and 0 for disable. | ||||
| SgeCPUPortDisablePIRL2Bucket | 1.3.6.1.4.1.27304.14.2.1.9 | INTEGER (0..4) | WO | |
scalar · INTEGER (0..4) · write-only · current Disables per port an already defined Port Ingress Rate Limitation (PIRL) bucket, input parameter bucket 0 - 4. | ||||
| SgeCPUPortEgressRateLimitation | 1.3.6.1.4.1.27304.14.2.1.10 | Integer32 | RW | |
scalar · Integer32 · read-write · current Sets the egress limitation rate for the port. Input parameter is value in kbps | ||||
| SgeCPUPortIngressRateLimitation | 1.3.6.1.4.1.27304.14.2.1.11 | OCTET STRING (SIZE (0..100)) | RW | |
scalar · OCTET STRING (SIZE (0..100)) · read-write · current Sets a Port Input Rate Limit(PIRL) bucket. Input parameters are: bucket:rate:layer:(DROP|FC) | ||||
| SgeCPUPortDefaultVLAN | 1.3.6.1.4.1.27304.14.2.1.12 | INTEGER | RW | |
scalar · INTEGER · read-write · current Sets the default VLAN ID(VID) for the port. Input parameter is 0 - 4095 | ||||
| SgeCPUPortForceDefaultVID | 1.3.6.1.4.1.27304.14.2.1.13 | INTEGER (0..1) | RW | |
scalar · INTEGER (0..1) · read-write · current Forces the tagging of VID on all frames on the port. Set to 1 for enable and 0 for disable. | ||||
| SgeCPUPortVLANPortMode | 1.3.6.1.4.1.27304.14.2.1.14 | INTEGER (0..3) | RW | |
scalar · INTEGER (0..3) · read-write · current Sets the 802.1Q mode for the ingress port.
Mode either 0=disable,
1=fallback,
2=check,
3=secure | ||||
| SgeCPUPortBlockAllUnknown | 1.3.6.1.4.1.27304.14.2.1.15 | INTEGER (0..1) | RW | |
scalar · INTEGER (0..1) · read-write · current This will make sure that all frames received on the port are blocked, unless they are tagged with the correct VID. | ||||
| SgeCPUPortIGMPSnooping | 1.3.6.1.4.1.27304.14.2.1.16 | INTEGER (0..1) | RW | |
scalar · INTEGER (0..1) · read-write · current Enables/disables IGMP snooping. Set to 1 for enable and 0 for disable. | ||||
| SgeCPUPortAddUnicast | 1.3.6.1.4.1.27304.14.2.1.17 | OCTET STRING (SIZE (0..100)) | WO | |
scalar · OCTET STRING (SIZE (0..100)) · write-only · current Adds the unicast mac address statically to the Address Translation Unit (ATU) Switch table. Input parameter is: aa:bb:cc:dd:ee:ff | ||||
| SgeCPUPortAddMulticast | 1.3.6.1.4.1.27304.14.2.1.18 | IpAddress | WO | |
scalar · IpAddress · write-only · current Adds the IP multicast address statically to the Address Translation Unit (ATU) Switch table. Input parameter is: aaa.bbb.ccc.ddd | ||||
| SgeCPUPortMtu | 1.3.6.1.4.1.27304.14.2.1.19 | INTEGER (0..2) | RW | |
scalar · INTEGER (0..2) · read-write · current The MTU size of the port. | ||||
| NgeWANPort | 1.3.6.1.4.1.27304.14.2.2 | |||
| SgeWANPortAutoNegotiation | 1.3.6.1.4.1.27304.14.2.2.1 | INTEGER (0..10) | RW | |
scalar · INTEGER (0..10) · read-write · current Enables/disables auto negotiation on the port. Set to 1 for enable and 0 for disable. | ||||
| SgeWANPortSpeedMode | 1.3.6.1.4.1.27304.14.2.2.2 | OCTET STRING (SIZE (0..10)) | RW | |
scalar · OCTET STRING (SIZE (0..10)) · read-write · current Sets/gets the speed and duplex mode on the port. Valid values are (1000FD|1000HD|100FD|100HD|10FD|10HD|AUTO|FD|HD) | ||||
| SgeWANPortLinkStatus | 1.3.6.1.4.1.27304.14.2.2.3 | INTEGER (0..1) | RO | |
scalar · INTEGER (0..1) · read-only · current Gets the Link status for the port | ||||
| SgeWANPortFlowControl | 1.3.6.1.4.1.27304.14.2.2.4 | INTEGER (0..1) | RW | |
scalar · INTEGER (0..1) · read-write · current Enables/disables flow control on the port. Set to 1 for enable and 0 for disable. | ||||
| SgeWANPortIEEEQoSPriority | 1.3.6.1.4.1.27304.14.2.2.5 | INTEGER (0..1) | RW | |
scalar · INTEGER (0..1) · read-write · current Enables prioritized frames based on there IEEE priority tags. Set to 1 for enable and 0 for disable. | ||||
| SgeWANPortIPQoSPriority | 1.3.6.1.4.1.27304.14.2.2.6 | INTEGER (0..1) | RW | |
scalar · INTEGER (0..1) · read-write · current Enables prioritized frames based on their IP4/IP6 priority fields. Set to 1 for enable and 0 for disable. | ||||
| SgeWANPortQoSPortMapRule | 1.3.6.1.4.1.27304.14.2.2.7 | INTEGER (0..1) | RW | |
scalar · INTEGER (0..1) · read-write · current Forces queue priority for a port. Set to 1 for enable and 0 for disable. | ||||
| SgeWANPortVIDNRLEnable | 1.3.6.1.4.1.27304.14.2.2.8 | INTEGER (0..1) | RW | |
scalar · INTEGER (0..1) · read-write · current Enables/disables per port the Non rate limit for VLANs with the NRL bit enabled. Set to 1 for enable and 0 for disable. | ||||
| SgeWANPortDisablePIRL2Bucket | 1.3.6.1.4.1.27304.14.2.2.9 | INTEGER (0..4) | WO | |
scalar · INTEGER (0..4) · write-only · current Disables per port an already defined Port Ingress Rate Limitation (PIRL) bucket, input parameter bucket 0 - 4. | ||||
| SgeWANPortEgressRateLimitation | 1.3.6.1.4.1.27304.14.2.2.10 | Integer32 | RW | |
scalar · Integer32 · read-write · current Sets the egress limitation rate for the port. Input parameter is value in kbps | ||||
| SgeWANPortIngressRateLimitation | 1.3.6.1.4.1.27304.14.2.2.11 | OCTET STRING (SIZE (0..100)) | WO | |
scalar · OCTET STRING (SIZE (0..100)) · write-only · current Sets a Port Input Rate Limit(PIRL) bucket. Input parameters are: bucket:rate:layer:(DROP|FC) | ||||
| SgeWANPortDefaultVLAN | 1.3.6.1.4.1.27304.14.2.2.12 | INTEGER | RW | |
scalar · INTEGER · read-write · current Sets the default VLAN ID(VID) for the port. Input parameter is 0 - 4095 | ||||
| SgeWANPortForceDefaultVID | 1.3.6.1.4.1.27304.14.2.2.13 | INTEGER (0..1) | RW | |
scalar · INTEGER (0..1) · read-write · current Forces the tagging of VID on all frames on the port. Set to 1 for enable and 0 for disable. | ||||
| SgeWANPortVLANPortMode | 1.3.6.1.4.1.27304.14.2.2.14 | INTEGER (0..3) | RW | |
scalar · INTEGER (0..3) · read-write · current Sets the 802.1Q mode for the ingress port.
Mode either 0=disable,
1=fallback,
2=check,
3=secure | ||||
| SgeWANPortBlockAllUnknown | 1.3.6.1.4.1.27304.14.2.2.15 | INTEGER (0..1) | RW | |
scalar · INTEGER (0..1) · read-write · current This will make sure that all frames received on the port are blocked, unless they are tagged with the correct VID. | ||||
| SgeWANPortIGMPSnooping | 1.3.6.1.4.1.27304.14.2.2.16 | INTEGER (0..1) | RW | |
scalar · INTEGER (0..1) · read-write · current Enables/disables IGMP snooping. Set to 1 for enable and 0 for disable. | ||||
| SgeWANPortAddUnicast | 1.3.6.1.4.1.27304.14.2.2.17 | OCTET STRING (SIZE (0..100)) | WO | |
scalar · OCTET STRING (SIZE (0..100)) · write-only · current Adds the unicast mac address statically to the Address Translation Unit (ATU) Switch table. Input parameter is: aa:bb:cc:dd:ee:ff | ||||
| SgeWANPortAddMulticast | 1.3.6.1.4.1.27304.14.2.2.18 | IpAddress | WO | |
scalar · IpAddress · write-only · current Adds the IP multicast address statically to the Address Translation Unit (ATU) Switch table. Input parameter is: aaa.bbb.ccc.ddd | ||||
| SgeWANPortMtu | 1.3.6.1.4.1.27304.14.2.2.19 | INTEGER (0..2) | RW | |
scalar · INTEGER (0..2) · read-write · current The MTU size of the port. | ||||
| SgeWANPortArpMirroring | 1.3.6.1.4.1.27304.14.2.2.20 | INTEGER (0..1) | RW | |
scalar · INTEGER (0..1) · read-write · current Mirror ARP packets seen on the port to the CPU port. | ||||
| NgeLAN1Port | 1.3.6.1.4.1.27304.14.2.3 | |||
| SgeLAN1PortAutoNegotiation | 1.3.6.1.4.1.27304.14.2.3.1 | INTEGER (0..10) | RW | |
scalar · INTEGER (0..10) · read-write · current Enables/disables auto negotiation on the port. Set to 1 for enable and 0 for disable. | ||||
| SgeLAN1PortSpeedMode | 1.3.6.1.4.1.27304.14.2.3.2 | OCTET STRING (SIZE (0..10)) | RW | |
scalar · OCTET STRING (SIZE (0..10)) · read-write · current Sets/gets the speed and duplex mode on the port. Valid values are (1000FD|1000HD|100FD|100HD|10FD|10HD|AUTO|FD|HD) | ||||
| SgeLAN1PortLinkStatus | 1.3.6.1.4.1.27304.14.2.3.3 | INTEGER (0..1) | RO | |
scalar · INTEGER (0..1) · read-only · current Gets the Link status for the port | ||||
| SgeLAN1PortFlowControl | 1.3.6.1.4.1.27304.14.2.3.4 | INTEGER (0..1) | RW | |
scalar · INTEGER (0..1) · read-write · current Enables/disables flow control on the port. Set to 1 for enable and 0 for disable. | ||||
| SgeLAN1PortIEEEQoSPriority | 1.3.6.1.4.1.27304.14.2.3.5 | INTEGER (0..1) | RW | |
scalar · INTEGER (0..1) · read-write · current Enables prioritized frames based on there IEEE priority tags. Set to 1 for enable and 0 for disable. | ||||
| SgeLAN1PortIPQoSPriority | 1.3.6.1.4.1.27304.14.2.3.6 | INTEGER (0..1) | RW | |
scalar · INTEGER (0..1) · read-write · current Enables prioritized frames based on their IP4/IP6 priority fields. Set to 1 for enable and 0 for disable. | ||||
| SgeLAN1PortQoSPortMapRule | 1.3.6.1.4.1.27304.14.2.3.7 | INTEGER (0..1) | RW | |
scalar · INTEGER (0..1) · read-write · current Forces queue priority for a port. Set to 1 for enable and 0 for disable. | ||||
| SgeLAN1PortVIDNRLEnable | 1.3.6.1.4.1.27304.14.2.3.8 | INTEGER (0..1) | RW | |
scalar · INTEGER (0..1) · read-write · current Enables/disables per port the Non rate limit for VLANs with the NRL bit enabled. Set to 1 for enable and 0 for disable. | ||||
| SgeLAN1PortDisablePIRL2Bucket | 1.3.6.1.4.1.27304.14.2.3.9 | INTEGER (0..4) | WO | |
scalar · INTEGER (0..4) · write-only · current Disables per port an already defined Port Ingress Rate Limitation (PIRL) bucket, input parameter bucket 0 - 4. | ||||
| SgeLAN1PortEgressRateLimitation | 1.3.6.1.4.1.27304.14.2.3.10 | Integer32 | RW | |
scalar · Integer32 · read-write · current Sets the egress limitation rate for the port. Input parameter is value in kbps | ||||
| SgeLAN1PortIngressRateLimitation | 1.3.6.1.4.1.27304.14.2.3.11 | OCTET STRING (SIZE (0..100)) | WO | |
scalar · OCTET STRING (SIZE (0..100)) · write-only · current Sets a Port Input Rate Limit(PIRL) bucket. Input parameters are: bucket:rate:layer:(DROP|FC) | ||||
| SgeLAN1PortDefaultVLAN | 1.3.6.1.4.1.27304.14.2.3.12 | INTEGER | RW | |
scalar · INTEGER · read-write · current Sets the default VLAN ID(VID) for the port. Input parameter is 0 - 4095 | ||||
| SgeLAN1PortForceDefaultVID | 1.3.6.1.4.1.27304.14.2.3.13 | INTEGER (0..1) | RW | |
scalar · INTEGER (0..1) · read-write · current Forces the tagging of VID on all frames on the port. Set to 1 for enable and 0 for disable. | ||||
| SgeLAN1PortVLANPortMode | 1.3.6.1.4.1.27304.14.2.3.14 | INTEGER (0..3) | RW | |
scalar · INTEGER (0..3) · read-write · current Sets the 802.1Q mode for the ingress port.
Mode either 0=disable,
1=fallback,
2=check,
3=secure | ||||
| SgeLAN1PortBlockAllUnknown | 1.3.6.1.4.1.27304.14.2.3.15 | INTEGER (0..1) | RW | |
scalar · INTEGER (0..1) · read-write · current This will make sure that all frames received on the port are blocked, unless they are tagged with the correct VID. | ||||
| SgeLAN1PortIGMPSnooping | 1.3.6.1.4.1.27304.14.2.3.16 | INTEGER (0..1) | RW | |
scalar · INTEGER (0..1) · read-write · current Enables/disables IGMP snooping. Set to 1 for enable and 0 for disable. | ||||
| SgeLAN1PortAddUnicast | 1.3.6.1.4.1.27304.14.2.3.17 | OCTET STRING (SIZE (0..100)) | WO | |
scalar · OCTET STRING (SIZE (0..100)) · write-only · current Adds the unicast mac address statically to the Address Translation Unit (ATU) Switch table. Input parameter is: aa:bb:cc:dd:ee:ff | ||||
| SgeLAN1PortAddMulticast | 1.3.6.1.4.1.27304.14.2.3.18 | IpAddress | WO | |
scalar · IpAddress · write-only · current Adds the IP multicast address statically to the Address Translation Unit (ATU) Switch table. Input parameter is: aaa.bbb.ccc.ddd | ||||
| SgeLAN1PortMtu | 1.3.6.1.4.1.27304.14.2.3.19 | INTEGER (0..2) | RW | |
scalar · INTEGER (0..2) · read-write · current The MTU size of the port. | ||||
| SgeLAN1PortArpMirroring | 1.3.6.1.4.1.27304.14.2.3.20 | INTEGER (0..1) | RW | |
scalar · INTEGER (0..1) · read-write · current Mirror ARP packets seen on the port to the CPU port. | ||||
| NgeLAN2Port | 1.3.6.1.4.1.27304.14.2.4 | |||
| SgeLAN2PortAutoNegotiation | 1.3.6.1.4.1.27304.14.2.4.1 | INTEGER (0..10) | RW | |
scalar · INTEGER (0..10) · read-write · current Enables/disables auto negotiation on the port. Set to 1 for enable and 0 for disable. | ||||
| SgeLAN2PortSpeedMode | 1.3.6.1.4.1.27304.14.2.4.2 | OCTET STRING (SIZE (0..10)) | RW | |
scalar · OCTET STRING (SIZE (0..10)) · read-write · current Sets/gets the speed and duplex mode on the port. Valid values are (1000FD|1000HD|100FD|100HD|10FD|10HD|AUTO|FD|HD) | ||||
| SgeLAN2PortLinkStatus | 1.3.6.1.4.1.27304.14.2.4.3 | INTEGER (0..1) | RO | |
scalar · INTEGER (0..1) · read-only · current Gets the Link status for the port | ||||
| SgeLAN2PortFlowControl | 1.3.6.1.4.1.27304.14.2.4.4 | INTEGER (0..1) | RW | |
scalar · INTEGER (0..1) · read-write · current Enables/disables flow control on the port. Set to 1 for enable and 0 for disable. | ||||
| SgeLAN2PortIEEEQoSPriority | 1.3.6.1.4.1.27304.14.2.4.5 | INTEGER (0..1) | RW | |
scalar · INTEGER (0..1) · read-write · current Enables prioritized frames based on there IEEE priority tags. Set to 1 for enable and 0 for disable. | ||||
| SgeLAN2PortIPQoSPriority | 1.3.6.1.4.1.27304.14.2.4.6 | INTEGER (0..1) | RW | |
scalar · INTEGER (0..1) · read-write · current Enables prioritized frames based on their IP4/IP6 priority fields. Set to 1 for enable and 0 for disable. | ||||
| SgeLAN2PortQoSPortMapRule | 1.3.6.1.4.1.27304.14.2.4.7 | INTEGER (0..1) | RW | |
scalar · INTEGER (0..1) · read-write · current Forces queue priority for a port. Set to 1 for enable and 0 for disable. | ||||
| SgeLAN2PortVIDNRLEnable | 1.3.6.1.4.1.27304.14.2.4.8 | INTEGER (0..1) | RW | |
scalar · INTEGER (0..1) · read-write · current Enables/disables per port the Non rate limit for VLANs with the NRL bit enabled. Set to 1 for enable and 0 for disable. | ||||
| SgeLAN2PortDisablePIRL2Bucket | 1.3.6.1.4.1.27304.14.2.4.9 | INTEGER (0..4) | WO | |
scalar · INTEGER (0..4) · write-only · current Disables per port an already defined Port Ingress Rate Limitation (PIRL) bucket, input parameter bucket 0 - 4. | ||||
| SgeLAN2PortEgressRateLimitation | 1.3.6.1.4.1.27304.14.2.4.10 | Integer32 | RW | |
scalar · Integer32 · read-write · current Sets the egress limitation rate for the port. Input parameter is value in kbps | ||||
| SgeLAN2PortIngressRateLimitation | 1.3.6.1.4.1.27304.14.2.4.11 | OCTET STRING (SIZE (0..100)) | WO | |
scalar · OCTET STRING (SIZE (0..100)) · write-only · current Sets a Port Input Rate Limit(PIRL) bucket. Input parameters are: bucket:rate:layer:(DROP|FC) | ||||
| SgeLAN2PortDefaultVLAN | 1.3.6.1.4.1.27304.14.2.4.12 | INTEGER | RW | |
scalar · INTEGER · read-write · current Sets the default VLAN ID(VID) for the port. Input parameter is 0 - 4095 | ||||
| SgeLAN2PortForceDefaultVID | 1.3.6.1.4.1.27304.14.2.4.13 | INTEGER (0..1) | RW | |
scalar · INTEGER (0..1) · read-write · current Forces the tagging of VID on all frames on the port. Set to 1 for enable and 0 for disable. | ||||
| SgeLAN2PortVLANPortMode | 1.3.6.1.4.1.27304.14.2.4.14 | INTEGER (0..3) | RW | |
scalar · INTEGER (0..3) · read-write · current Sets the 802.1Q mode for the ingress port.
Mode either 0=disable,
1=fallback,
2=check,
3=secure | ||||
| SgeLAN2PortBlockAllUnknown | 1.3.6.1.4.1.27304.14.2.4.15 | INTEGER (0..1) | RW | |
scalar · INTEGER (0..1) · read-write · current This will make sure that all frames received on the port are blocked, unless they are tagged with the correct VID. | ||||
| SgeLAN2PortIGMPSnooping | 1.3.6.1.4.1.27304.14.2.4.16 | INTEGER (0..1) | RW | |
scalar · INTEGER (0..1) · read-write · current Enables/disables IGMP snooping. Set to 1 for enable and 0 for disable. | ||||
| SgeLAN2PortAddUnicast | 1.3.6.1.4.1.27304.14.2.4.17 | OCTET STRING (SIZE (0..100)) | WO | |
scalar · OCTET STRING (SIZE (0..100)) · write-only · current Adds the unicast mac address statically to the Address Translation Unit (ATU) Switch table. Input parameter is: aa:bb:cc:dd:ee:ff | ||||
| SgeLAN2PortAddMulticast | 1.3.6.1.4.1.27304.14.2.4.18 | IpAddress | WO | |
scalar · IpAddress · write-only · current Adds the IP multicast address statically to the Address Translation Unit (ATU) Switch table. Input parameter is: aaa.bbb.ccc.ddd | ||||
| SgeLAN2PortMtu | 1.3.6.1.4.1.27304.14.2.4.19 | INTEGER (0..2) | RW | |
scalar · INTEGER (0..2) · read-write · current The MTU size of the port. | ||||
| SgeLAN2PortArpMirroring | 1.3.6.1.4.1.27304.14.2.4.20 | INTEGER (0..1) | RW | |
scalar · INTEGER (0..1) · read-write · current Mirror ARP packets seen on the port to the CPU port. | ||||
| NgeLAN3Port | 1.3.6.1.4.1.27304.14.2.5 | |||
| SgeLAN3PortAutoNegotiation | 1.3.6.1.4.1.27304.14.2.5.1 | INTEGER (0..10) | RW | |
scalar · INTEGER (0..10) · read-write · current Enables/disables auto negotiation on the port. Set to 1 for enable and 0 for disable. | ||||
| SgeLAN3PortSpeedMode | 1.3.6.1.4.1.27304.14.2.5.2 | OCTET STRING (SIZE (0..10)) | RW | |
scalar · OCTET STRING (SIZE (0..10)) · read-write · current Sets/gets the speed and duplex mode on the port. Valid values are (1000FD|1000HD|100FD|100HD|10FD|10HD|AUTO|FD|HD) | ||||
| SgeLAN3PortLinkStatus | 1.3.6.1.4.1.27304.14.2.5.3 | INTEGER (0..1) | RO | |
scalar · INTEGER (0..1) · read-only · current Gets the Link status for the port | ||||
| SgeLAN3PortFlowControl | 1.3.6.1.4.1.27304.14.2.5.4 | INTEGER (0..1) | RW | |
scalar · INTEGER (0..1) · read-write · current Enables/disables flow control on the port. Set to 1 for enable and 0 for disable. | ||||
| SgeLAN3PortIEEEQoSPriority | 1.3.6.1.4.1.27304.14.2.5.5 | INTEGER (0..1) | RW | |
scalar · INTEGER (0..1) · read-write · current Enables prioritized frames based on there IEEE priority tags. Set to 1 for enable and 0 for disable. | ||||
| SgeLAN3PortIPQoSPriority | 1.3.6.1.4.1.27304.14.2.5.6 | INTEGER (0..1) | RW | |
scalar · INTEGER (0..1) · read-write · current Enables prioritized frames based on their IP4/IP6 priority fields. Set to 1 for enable and 0 for disable. | ||||
| SgeLAN3PortQoSPortMapRule | 1.3.6.1.4.1.27304.14.2.5.7 | INTEGER (0..1) | RW | |
scalar · INTEGER (0..1) · read-write · current Forces queue priority for a port. Set to 1 for enable and 0 for disable. | ||||
| SgeLAN3PortVIDNRLEnable | 1.3.6.1.4.1.27304.14.2.5.8 | INTEGER (0..1) | RW | |
scalar · INTEGER (0..1) · read-write · current Enables/disables per port the Non rate limit for VLANs with the NRL bit enabled. Set to 1 for enable and 0 for disable. | ||||
| SgeLAN3PortDisablePIRL2Bucket | 1.3.6.1.4.1.27304.14.2.5.9 | INTEGER (0..4) | WO | |
scalar · INTEGER (0..4) · write-only · current Disables per port an already defined Port Ingress Rate Limitation (PIRL) bucket, input parameter bucket 0 - 4. | ||||
| SgeLAN3PortEgressRateLimitation | 1.3.6.1.4.1.27304.14.2.5.10 | Integer32 | RW | |
scalar · Integer32 · read-write · current Sets the egress limitation rate for the port. Input parameter is value in kbps | ||||
| SgeLAN3PortIngressRateLimitation | 1.3.6.1.4.1.27304.14.2.5.11 | OCTET STRING (SIZE (0..100)) | WO | |
scalar · OCTET STRING (SIZE (0..100)) · write-only · current Sets a Port Input Rate Limit(PIRL) bucket. Input parameters are: bucket:rate:layer:(DROP|FC) | ||||
| SgeLAN3PortDefaultVLAN | 1.3.6.1.4.1.27304.14.2.5.12 | INTEGER | RW | |
scalar · INTEGER · read-write · current Sets the default VLAN ID(VID) for the port. Input parameter is 0 - 4095 | ||||
| SgeLAN3PortForceDefaultVID | 1.3.6.1.4.1.27304.14.2.5.13 | INTEGER (0..1) | RW | |
scalar · INTEGER (0..1) · read-write · current Forces the tagging of VID on all frames on the port. Set to 1 for enable and 0 for disable. | ||||
| SgeLAN3PortVLANPortMode | 1.3.6.1.4.1.27304.14.2.5.14 | INTEGER (0..3) | RW | |
scalar · INTEGER (0..3) · read-write · current Sets the 802.1Q mode for the ingress port.
Mode either 0=disable,
1=fallback,
2=check,
3=secure | ||||
| SgeLAN3PortBlockAllUnknown | 1.3.6.1.4.1.27304.14.2.5.15 | INTEGER (0..1) | RW | |
scalar · INTEGER (0..1) · read-write · current This will make sure that all frames received on the port are blocked, unless they are tagged with the correct VID. | ||||
| SgeLAN3PortIGMPSnooping | 1.3.6.1.4.1.27304.14.2.5.16 | INTEGER (0..1) | RW | |
scalar · INTEGER (0..1) · read-write · current Enables/disables IGMP snooping. Set to 1 for enable and 0 for disable. | ||||
| SgeLAN3PortAddUnicast | 1.3.6.1.4.1.27304.14.2.5.17 | OCTET STRING (SIZE (0..100)) | WO | |
scalar · OCTET STRING (SIZE (0..100)) · write-only · current Adds the unicast mac address statically to the Address Translation Unit (ATU) Switch table. Input parameter is: aa:bb:cc:dd:ee:ff | ||||
| SgeLAN3PortAddMulticast | 1.3.6.1.4.1.27304.14.2.5.18 | IpAddress | WO | |
scalar · IpAddress · write-only · current Adds the IP multicast address statically to the Address Translation Unit (ATU) Switch table. Input parameter is: aaa.bbb.ccc.ddd | ||||
| SgeLAN3PortMtu | 1.3.6.1.4.1.27304.14.2.5.19 | INTEGER (0..2) | RW | |
scalar · INTEGER (0..2) · read-write · current The MTU size of the port. | ||||
| SgeLAN3PortArpMirroring | 1.3.6.1.4.1.27304.14.2.5.20 | INTEGER (0..1) | RW | |
scalar · INTEGER (0..1) · read-write · current Mirror ARP packets seen on the port to the CPU port. | ||||
| NgeLAN4Port | 1.3.6.1.4.1.27304.14.2.6 | |||
| SgeLAN4PortAutoNegotiation | 1.3.6.1.4.1.27304.14.2.6.1 | INTEGER (0..10) | RW | |
scalar · INTEGER (0..10) · read-write · current Enables/disables auto negotiation on the port. Set to 1 for enable and 0 for disable. | ||||
| SgeLAN4PortSpeedMode | 1.3.6.1.4.1.27304.14.2.6.2 | OCTET STRING (SIZE (0..10)) | RW | |
scalar · OCTET STRING (SIZE (0..10)) · read-write · current Sets/gets the speed and duplex mode on the port. Valid values are (1000FD|1000HD|100FD|100HD|10FD|10HD|AUTO|FD|HD) | ||||
| SgeLAN4PortLinkStatus | 1.3.6.1.4.1.27304.14.2.6.3 | INTEGER (0..1) | RO | |
scalar · INTEGER (0..1) · read-only · current Gets the Link status for the port | ||||
| SgeLAN4PortFlowControl | 1.3.6.1.4.1.27304.14.2.6.4 | INTEGER (0..1) | RW | |
scalar · INTEGER (0..1) · read-write · current Enables/disables flow control on the port. Set to 1 for enable and 0 for disable. | ||||
| SgeLAN4PortIEEEQoSPriority | 1.3.6.1.4.1.27304.14.2.6.5 | INTEGER (0..1) | RW | |
scalar · INTEGER (0..1) · read-write · current Enables prioritized frames based on there IEEE priority tags. Set to 1 for enable and 0 for disable. | ||||
| SgeLAN4PortIPQoSPriority | 1.3.6.1.4.1.27304.14.2.6.6 | INTEGER (0..1) | RW | |
scalar · INTEGER (0..1) · read-write · current Enables prioritized frames based on their IP4/IP6 priority fields. Set to 1 for enable and 0 for disable. | ||||
| SgeLAN4PortQoSPortMapRule | 1.3.6.1.4.1.27304.14.2.6.7 | INTEGER (0..1) | RW | |
scalar · INTEGER (0..1) · read-write · current Forces queue priority for a port. Set to 1 for enable and 0 for disable. | ||||
| SgeLAN4PortVIDNRLEnable | 1.3.6.1.4.1.27304.14.2.6.8 | INTEGER (0..1) | RW | |
scalar · INTEGER (0..1) · read-write · current Enables/disables per port the Non rate limit for VLANs with the NRL bit enabled. Set to 1 for enable and 0 for disable. | ||||
| SgeLAN4PortDisablePIRL2Bucket | 1.3.6.1.4.1.27304.14.2.6.9 | INTEGER (0..4) | WO | |
scalar · INTEGER (0..4) · write-only · current Disables per port an already defined Port Ingress Rate Limitation (PIRL) bucket, input parameter bucket 0 - 4. | ||||
| SgeLAN4PortEgressRateLimitation | 1.3.6.1.4.1.27304.14.2.6.10 | Integer32 | RW | |
scalar · Integer32 · read-write · current Sets the egress limitation rate for the port. Input parameter is value in kbps | ||||
| SgeLAN4PortIngressRateLimitation | 1.3.6.1.4.1.27304.14.2.6.11 | OCTET STRING (SIZE (0..100)) | WO | |
scalar · OCTET STRING (SIZE (0..100)) · write-only · current Sets a Port Input Rate Limit(PIRL) bucket. Input parameters are: bucket:rate:layer:(DROP|FC) | ||||
| SgeLAN4PortDefaultVLAN | 1.3.6.1.4.1.27304.14.2.6.12 | INTEGER | RW | |
scalar · INTEGER · read-write · current Sets the default VLAN ID(VID) for the port. Input parameter is 0 - 4095 | ||||
| SgeLAN4PortForceDefaultVID | 1.3.6.1.4.1.27304.14.2.6.13 | INTEGER (0..1) | RW | |
scalar · INTEGER (0..1) · read-write · current Forces the tagging of VID on all frames on the port. Set to 1 for enable and 0 for disable. | ||||
| SgeLAN4PortVLANPortMode | 1.3.6.1.4.1.27304.14.2.6.14 | INTEGER (0..3) | RW | |
scalar · INTEGER (0..3) · read-write · current Sets the 802.1Q mode for the ingress port.
Mode either 0=disable,
1=fallback,
2=check,
3=secure | ||||
| SgeLAN4PortBlockAllUnknown | 1.3.6.1.4.1.27304.14.2.6.15 | INTEGER (0..1) | RW | |
scalar · INTEGER (0..1) · read-write · current This will make sure that all frames received on the port are blocked, unless they are tagged with the correct VID. | ||||
| SgeLAN4PortIGMPSnooping | 1.3.6.1.4.1.27304.14.2.6.16 | INTEGER (0..1) | RW | |
scalar · INTEGER (0..1) · read-write · current Enables/disables IGMP snooping. Set to 1 for enable and 0 for disable. | ||||
| SgeLAN4PortAddUnicast | 1.3.6.1.4.1.27304.14.2.6.17 | OCTET STRING (SIZE (0..100)) | WO | |
scalar · OCTET STRING (SIZE (0..100)) · write-only · current Adds the unicast mac address statically to the Address Translation Unit (ATU) Switch table. Input parameter is: aa:bb:cc:dd:ee:ff | ||||
| SgeLAN4PortAddMulticast | 1.3.6.1.4.1.27304.14.2.6.18 | IpAddress | WO | |
scalar · IpAddress · write-only · current Adds the IP multicast address statically to the Address Translation Unit (ATU) Switch table. Input parameter is: aaa.bbb.ccc.ddd | ||||
| SgeLAN4PortMtu | 1.3.6.1.4.1.27304.14.2.6.19 | INTEGER (0..2) | RW | |
scalar · INTEGER (0..2) · read-write · current The MTU size of the port. | ||||
| SgeLAN4PortArpMirroring | 1.3.6.1.4.1.27304.14.2.6.20 | INTEGER (0..1) | RW | |
scalar · INTEGER (0..1) · read-write · current Mirror ARP packets seen on the port to the CPU port. | ||||
| GgeModuleGroup | 1.3.6.1.4.1.27304.14.4 | |||
group · current The objects are related to the DKTCOMEGA Gigabit module, MIB rev 02_00.
| ||||