DKT-FE-MIB
DKT A/SDKT Fast Ethernet MIB.
snmptranslate -m DKT-FE-MIB -Tpsnmpwalk -v2c -c <community> -m DKT-FE-MIB <host> 1.3.6.1.4.1.27304.12Imports
| DKT-MIB | dkt |
|---|---|
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | Bits, Counter32, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso |
| SNMPv2-TC | DisplayString, PhysAddress, TEXTUAL-CONVENTION |
OID tree
| Name | OID | Type | Access | Status |
|---|---|---|---|---|
| IfeMIB | 1.3.6.1.4.1.27304.12 | |||
identity DKT Fast Ethernet MIB. | ||||
| NfeSwitchEngine | 1.3.6.1.4.1.27304.12.1 | |||
| SfeATU | 1.3.6.1.4.1.27304.12.1.1 | OCTET STRING (SIZE (0..20480)) | RO | |
scalar · OCTET STRING (SIZE (0..20480)) · read-only · current Dumps the Address Translation Unit (ATU) Switch table in semi colon format | ||||
| SfeUnicastDelete | 1.3.6.1.4.1.27304.12.1.2 | OCTET STRING (SIZE (0..100)) | WO | |
scalar · OCTET STRING (SIZE (0..100)) · write-only · current Removes a unicast MAC address from the Address Translation Unit (ATU) Switch table. | ||||
| SfeMulticastDelete | 1.3.6.1.4.1.27304.12.1.3 | IpAddress | WO | |
scalar · IpAddress · write-only · current Removes a multicast IP address from the Address Translation Unit (ATU) Switch table. | ||||
| SfeIGMPSnooping | 1.3.6.1.4.1.27304.12.1.4 | INTEGER (0..1) | RW | |
scalar · INTEGER (0..1) · read-write · current Starts/stops IGMP snooping, input parameter 0 = stops IGMP snooping, 1 = starts IGMP snooping. Per Default IGMP snooping is enabled, but has to be configured per port | ||||
| SfeVTU | 1.3.6.1.4.1.27304.12.1.5 | OCTET STRING (SIZE (0..9600)) | RO | |
scalar · OCTET STRING (SIZE (0..9600)) · read-only · current Dumps the VLAN Table Unit (VTU) Switch table in semi colon format | ||||
| SfeVLANCreate | 1.3.6.1.4.1.27304.12.1.6 | OCTET STRING (SIZE (0..100)) | WO | |
scalar · OCTET STRING (SIZE (0..100)) · write-only · current Creates a VLAN, input parameters are: VID:WAN:LAN1:LAN2:LAN3:LAN4:CPU:NRL-ENABLE | ||||
| SfeVLANDelete | 1.3.6.1.4.1.27304.12.1.7 | INTEGER (0..4095) | WO | |
scalar · INTEGER (0..4095) · write-only · current Deletes a VLAN, input parameter is VLAN VID: 0 - 4095 | ||||
| SfeClearVTU | 1.3.6.1.4.1.27304.12.1.8 | INTEGER (1) | WO | |
scalar · INTEGER (1) · write-only · current Clears the VLAN Table Unit (VTU) Switch table, input parameter 1 = clear VTU table | ||||
| SfeDumpPIRLBuckets | 1.3.6.1.4.1.27304.12.1.9 | OCTET STRING (SIZE (0..10)) | RO | |
scalar · OCTET STRING (SIZE (0..10)) · read-only · current Dumps a list of the active buckets. | ||||
| SfeDisablePIRLBucket | 1.3.6.1.4.1.27304.12.1.10 | INTEGER (0..11) | WO | |
scalar · INTEGER (0..11) · write-only · current Disables an already defined Port Ingress Rate Limitation (PIRL) bucket, input parameter bucket 0 - 11. | ||||
| SfeVLANProviderMode | 1.3.6.1.4.1.27304.12.1.11 | INTEGER (0..1) | RW | |
scalar · INTEGER (0..1) · read-write · current Enable/disable VLAN provider mode, input parameter 0 = disable VLAN provider mode, 1 = enable VLAN provider mode. Per Default VLAN provider mode is disabled. NOTE: Provider VLAN ID should be setup in port default VID for the originating port. | ||||
| NfePorts | 1.3.6.1.4.1.27304.12.2 | |||
| NfeCPUPort | 1.3.6.1.4.1.27304.12.2.1 | |||
| SfeCPUPortAutoNegotiation | 1.3.6.1.4.1.27304.12.2.1.1 | INTEGER (0..10) | RW | |
scalar · INTEGER (0..10) · read-write · current Enables/disables auto negotiation on the port. Set to 1 for enable and 0 for disable. | ||||
| SfeCPUPortSpeedMode | 1.3.6.1.4.1.27304.12.2.1.2 | OCTET STRING (SIZE (0..10)) | RW | |
scalar · OCTET STRING (SIZE (0..10)) · read-write · current Sets/gets the speed and duplex mode on the port. Input parameters are: 100FD|100HD|10FD|10HD|AUTO|FD|HD | ||||
| SfeCPUPortLinkStatus | 1.3.6.1.4.1.27304.12.2.1.3 | INTEGER (0..1) | RO | |
scalar · INTEGER (0..1) · read-only · current Gets the Link status for the port | ||||
| SfeCPUPortFlowControl | 1.3.6.1.4.1.27304.12.2.1.4 | INTEGER (0..1) | RW | |
scalar · INTEGER (0..1) · read-write · current Enables/disables flow control on the port. Set to 1 for enable and 0 for disable. | ||||
| SfeCPUPortIEEEQoSPriority | 1.3.6.1.4.1.27304.12.2.1.5 | INTEGER (0..1) | RW | |
scalar · INTEGER (0..1) · read-write · current Enables prioritized frames based on there IEEE priority tags. Set to 1 for enable and 0 for disable. | ||||
| SfeCPUPortIPQoSPriority | 1.3.6.1.4.1.27304.12.2.1.6 | INTEGER (0..1) | RW | |
scalar · INTEGER (0..1) · read-write · current Enables prioritized frames based on their IP4/IP6 priority fields. Set to 1 for enable and 0 for disable. | ||||
| SfeCPUPortFramePriorityOverwrite | 1.3.6.1.4.1.27304.12.2.1.7 | OCTET STRING (SIZE (0..100)) | RW | |
scalar · OCTET STRING (SIZE (0..100)) · read-write · current Source Address(SA) or Destination Address(DA) Frame Priority Override on an ATU match. XX_FRAME_PRIO_OVERRIDE=0..1. | ||||
| SfeCPUPortQueuePriorityOverwrite | 1.3.6.1.4.1.27304.12.2.1.8 | OCTET STRING (SIZE (0..100)) | RW | |
scalar · OCTET STRING (SIZE (0..100)) · read-write · current Source Address(SA) or Destination Address(SA) Queue Priority Override on an ATU match. XX_QUEUE_PRIO_OVERRIDE=0..1. | ||||
| SfeCPUPortQueuePriority | 1.3.6.1.4.1.27304.12.2.1.9 | OCTET STRING (SIZE (0..100)) | RW | |
scalar · OCTET STRING (SIZE (0..100)) · read-write · current Queue priority, input parameters: PRIO:ENABLE PRIO: 0 - 7 ENABLE: 0 - 1 | ||||
| SfeCPUPortQoSPortMapRule | 1.3.6.1.4.1.27304.12.2.1.10 | INTEGER (0..1) | RW | |
scalar · INTEGER (0..1) · read-write · current Forces queue priority for a port. Set to 1 for enable and 0 for disable. | ||||
| SfeCPUPortVIDNRLEnable | 1.3.6.1.4.1.27304.12.2.1.11 | INTEGER (0..1) | RW | |
scalar · INTEGER (0..1) · read-write · current Enables/disables per port the Non rate limit for VLANs with the NRL bit enabled. Set to 1 for enable and 0 for disable. | ||||
| SfeCPUPortMap2PIRL | 1.3.6.1.4.1.27304.12.2.1.12 | INTEGER (0..11) | WO | |
scalar · INTEGER (0..11) · write-only · current Adds/maps the port to a Port Ingress Rate Limitation (PIRL) bucket. Input parameter is PIRL bucket no 0 - 11. | ||||
| SfeCPUPortDeletePortMap2PIRL | 1.3.6.1.4.1.27304.12.2.1.13 | INTEGER (0..11) | WO | |
scalar · INTEGER (0..11) · write-only · current Deletes the port from a Port Ingress Rate Limitation (PIRL) bucket. Input parameter is PIRL bucket no 0 - 11. | ||||
| SfeCPUPortEgressRateLimitation | 1.3.6.1.4.1.27304.12.2.1.14 | Integer32 | RW | |
scalar · Integer32 · read-write · current Sets the egress limitation rate for the port. Input parameter is value in kbps | ||||
| SfeCPUPortIngressRateLimitation | 1.3.6.1.4.1.27304.12.2.1.15 | OCTET STRING (SIZE (0..100)) | RW | |
scalar · OCTET STRING (SIZE (0..100)) · read-write · current Sets a Port Input Rate Limit(PIRL) bucket. Input parameters are: bucket:rate:layer:(DROP|FC) | ||||
| SfeCPUPortDefaultVLAN | 1.3.6.1.4.1.27304.12.2.1.16 | INTEGER | RW | |
scalar · INTEGER · read-write · current Sets the default VLAN ID(VID) for the port. Input parameter is 0 - 4095 | ||||
| SfeCPUPortForceDefaultVID | 1.3.6.1.4.1.27304.12.2.1.17 | INTEGER (0..1) | RW | |
scalar · INTEGER (0..1) · read-write · current Forces the tagging of VID on all frames on the port. Set to 1 for enable and 0 for disable. | ||||
| SfeCPUPortVLANPortMode | 1.3.6.1.4.1.27304.12.2.1.18 | INTEGER (0..3) | RW | |
scalar · INTEGER (0..3) · read-write · current Sets the 802.1Q mode for the ingress port.
Mode either 0=disable,
1=fallback,
2=check,
3=secure | ||||
| SfeCPUPortBlockAllUnknown | 1.3.6.1.4.1.27304.12.2.1.19 | INTEGER (0..1) | RW | |
scalar · INTEGER (0..1) · read-write · current This will make sure that all frames received on the port are blocked, unless they are tagged with the correct VID. | ||||
| SfeCPUPortIGMPSnooping | 1.3.6.1.4.1.27304.12.2.1.20 | INTEGER (0..1) | RW | |
scalar · INTEGER (0..1) · read-write · current Enables/disables IGMP snooping. Set to 1 for enable and 0 for disable. | ||||
| SfeCPUPortAddUnicast | 1.3.6.1.4.1.27304.12.2.1.21 | OCTET STRING (SIZE (0..100)) | WO | |
scalar · OCTET STRING (SIZE (0..100)) · write-only · current Adds the unicast mac address statically to the Address Translation Unit (ATU) Switch table. Input parameter is: aa:bb:cc:dd:ee:ff | ||||
| SfeCPUPortAddMulticast | 1.3.6.1.4.1.27304.12.2.1.22 | IpAddress | WO | |
scalar · IpAddress · write-only · current Adds the IP multicast address statically to the Address Translation Unit (ATU) Switch table. Input parameter is: aaa.bbb.ccc.ddd | ||||
| NfeWANPort | 1.3.6.1.4.1.27304.12.2.2 | |||
| SfeWANPortAutoNegotiation | 1.3.6.1.4.1.27304.12.2.2.1 | INTEGER (0..10) | RW | |
scalar · INTEGER (0..10) · read-write · current Enables/disables auto negotiation on the port. Set to 1 for enable and 0 for disable. | ||||
| SfeWANPortSpeedMode | 1.3.6.1.4.1.27304.12.2.2.2 | OCTET STRING (SIZE (0..10)) | RW | |
scalar · OCTET STRING (SIZE (0..10)) · read-write · current Sets/gets the speed and duplex mode on the port. Valid values are (100FD|100HD|10FD|10HD|AUTO|FD|HD) | ||||
| SfeWANPortLinkStatus | 1.3.6.1.4.1.27304.12.2.2.3 | INTEGER (0..1) | RO | |
scalar · INTEGER (0..1) · read-only · current Gets the Link status for the port | ||||
| SfeWANPortFlowControl | 1.3.6.1.4.1.27304.12.2.2.4 | INTEGER (0..1) | RW | |
scalar · INTEGER (0..1) · read-write · current Enables/disables flow control on the port. Set to 1 for enable and 0 for disable. | ||||
| SfeWANPortIEEEQoSPriority | 1.3.6.1.4.1.27304.12.2.2.5 | INTEGER (0..1) | RW | |
scalar · INTEGER (0..1) · read-write · current Enables prioritized frames based on there IEEE priority tags. Set to 1 for enable and 0 for disable. | ||||
| SfeWANPortIPQoSPriority | 1.3.6.1.4.1.27304.12.2.2.6 | INTEGER (0..1) | RW | |
scalar · INTEGER (0..1) · read-write · current Enables prioritized frames based on their IP4/IP6 priority fields. Set to 1 for enable and 0 for disable. | ||||
| SfeWANPortFramePriorityOverwrite | 1.3.6.1.4.1.27304.12.2.2.7 | OCTET STRING (SIZE (0..100)) | RW | |
scalar · OCTET STRING (SIZE (0..100)) · read-write · current Source Address(SA) or Destination Address(DA) Frame Priority Override on an ATU match. XX_FRAME_PRIO_OVERRIDE=0..1. | ||||
| SfeWANPortQueuePriorityOverwrite | 1.3.6.1.4.1.27304.12.2.2.8 | OCTET STRING (SIZE (0..100)) | RW | |
scalar · OCTET STRING (SIZE (0..100)) · read-write · current Source Address(SA) or Destination Address(SA) Queue Priority Override on an ATU match. XX_QUEUE_PRIO_OVERRIDE=0..1. | ||||
| SfeWANPortQueuePriority | 1.3.6.1.4.1.27304.12.2.2.9 | OCTET STRING (SIZE (0..100)) | RW | |
scalar · OCTET STRING (SIZE (0..100)) · read-write · current Queue priority, input parameters: PRIO:ENABLE PRIO: 0 - 7 ENABLE: 0 - 1 | ||||
| SfeWANPortQoSPortMapRule | 1.3.6.1.4.1.27304.12.2.2.10 | INTEGER (0..1) | RW | |
scalar · INTEGER (0..1) · read-write · current Forces queue priority for a port. Set to 1 for enable and 0 for disable. | ||||
| SfeWANPortVIDNRLEnable | 1.3.6.1.4.1.27304.12.2.2.11 | INTEGER (0..1) | RW | |
scalar · INTEGER (0..1) · read-write · current Enables/disables per port the Non rate limit for VLANs with the NRL bit enabled. Set to 1 for enable and 0 for disable. | ||||
| SfeWANPortMap2PIRL | 1.3.6.1.4.1.27304.12.2.2.12 | INTEGER (0..11) | WO | |
scalar · INTEGER (0..11) · write-only · current Adds/maps the port to a Port Ingress Rate Limitation (PIRL) bucket. Input parameter is PIRL bucket no 0 - 11. | ||||
| SfeWANPortDeletePortMap2PIRL | 1.3.6.1.4.1.27304.12.2.2.13 | INTEGER (0..11) | WO | |
scalar · INTEGER (0..11) · write-only · current Deletes the port from a Port Ingress Rate Limitation (PIRL) bucket. Input parameter is PIRL bucket no 0 - 11. | ||||
| SfeWANPortEgressRateLimitation | 1.3.6.1.4.1.27304.12.2.2.14 | Integer32 | RW | |
scalar · Integer32 · read-write · current Sets the egress limitation rate for the port. Input parameter is value in kbps | ||||
| SfeWANPortIngressRateLimitation | 1.3.6.1.4.1.27304.12.2.2.15 | OCTET STRING (SIZE (0..100)) | WO | |
scalar · OCTET STRING (SIZE (0..100)) · write-only · current Sets a Port Input Rate Limit(PIRL) bucket. Input parameters are: bucket:rate:layer:(DROP|FC) | ||||
| SfeWANPortDefaultVLAN | 1.3.6.1.4.1.27304.12.2.2.16 | INTEGER | RW | |
scalar · INTEGER · read-write · current Sets the default VLAN ID(VID) for the port. Input parameter is 0 - 4095 | ||||
| SfeWANPortForceDefaultVID | 1.3.6.1.4.1.27304.12.2.2.17 | INTEGER (0..1) | RW | |
scalar · INTEGER (0..1) · read-write · current Forces the tagging of VID on all frames on the port. Set to 1 for enable and 0 for disable. | ||||
| SfeWANPortVLANPortMode | 1.3.6.1.4.1.27304.12.2.2.18 | INTEGER (0..3) | RW | |
scalar · INTEGER (0..3) · read-write · current Sets the 802.1Q mode for the ingress port.
Mode either 0=disable,
1=fallback,
2=check,
3=secure | ||||
| SfeWANPortBlockAllUnknown | 1.3.6.1.4.1.27304.12.2.2.19 | INTEGER (0..1) | RW | |
scalar · INTEGER (0..1) · read-write · current This will make sure that all frames received on the port are blocked, unless they are tagged with the correct VID. | ||||
| SfeWANPortIGMPSnooping | 1.3.6.1.4.1.27304.12.2.2.20 | INTEGER (0..1) | RW | |
scalar · INTEGER (0..1) · read-write · current Enables/disables IGMP snooping. Set to 1 for enable and 0 for disable. | ||||
| SfeWANPortAddUnicast | 1.3.6.1.4.1.27304.12.2.2.21 | OCTET STRING (SIZE (0..100)) | WO | |
scalar · OCTET STRING (SIZE (0..100)) · write-only · current Adds the unicast mac address statically to the Address Translation Unit (ATU) Switch table. Input parameter is: aa:bb:cc:dd:ee:ff | ||||
| SfeWANPortAddMulticast | 1.3.6.1.4.1.27304.12.2.2.22 | IpAddress | WO | |
scalar · IpAddress · write-only · current Adds the IP multicast address statically to the Address Translation Unit (ATU) Switch table. Input parameter is: aaa.bbb.ccc.ddd | ||||
| SfeWANPortArpMirroring | 1.3.6.1.4.1.27304.12.2.2.23 | INTEGER (0..1) | RW | |
scalar · INTEGER (0..1) · read-write · current Mirror ARP packets seen on the port to the CPU port. | ||||
| NfeLAN1Port | 1.3.6.1.4.1.27304.12.2.3 | |||
| SfeLAN1PortAutoNegotiation | 1.3.6.1.4.1.27304.12.2.3.1 | INTEGER (0..10) | RW | |
scalar · INTEGER (0..10) · read-write · current Enables/disables auto negotiation on the port. Set to 1 for enable and 0 for disable. | ||||
| SfeLAN1PortSpeedMode | 1.3.6.1.4.1.27304.12.2.3.2 | OCTET STRING (SIZE (0..10)) | RW | |
scalar · OCTET STRING (SIZE (0..10)) · read-write · current Sets/gets the speed and duplex mode on the port. Valid values are (100FD|100HD|10FD|10HD|AUTO|FD|HD) | ||||
| SfeLAN1PortLinkStatus | 1.3.6.1.4.1.27304.12.2.3.3 | INTEGER (0..1) | RO | |
scalar · INTEGER (0..1) · read-only · current Gets the Link status for the port | ||||
| SfeLAN1PortFlowControl | 1.3.6.1.4.1.27304.12.2.3.4 | INTEGER (0..1) | RW | |
scalar · INTEGER (0..1) · read-write · current Enables/disables flow control on the port. Set to 1 for enable and 0 for disable. | ||||
| SfeLAN1PortIEEEQoSPriority | 1.3.6.1.4.1.27304.12.2.3.5 | INTEGER (0..1) | RW | |
scalar · INTEGER (0..1) · read-write · current Enables prioritized frames based on there IEEE priority tags. Set to 1 for enable and 0 for disable. | ||||
| SfeLAN1PortIPQoSPriority | 1.3.6.1.4.1.27304.12.2.3.6 | INTEGER (0..1) | RW | |
scalar · INTEGER (0..1) · read-write · current Enables prioritized frames based on their IP4/IP6 priority fields. Set to 1 for enable and 0 for disable. | ||||
| SfeLAN1PortFramePriorityOverwrite | 1.3.6.1.4.1.27304.12.2.3.7 | OCTET STRING (SIZE (0..100)) | RW | |
scalar · OCTET STRING (SIZE (0..100)) · read-write · current Source Address(SA) or Destination Address(DA) Frame Priority Override on an ATU match. XX_FRAME_PRIO_OVERRIDE=0..1. | ||||
| SfeLAN1PortQueuePriorityOverwrite | 1.3.6.1.4.1.27304.12.2.3.8 | OCTET STRING (SIZE (0..100)) | RW | |
scalar · OCTET STRING (SIZE (0..100)) · read-write · current Source Address(SA) or Destination Address(SA) Queue Priority Override on an ATU match. XX_QUEUE_PRIO_OVERRIDE=0..1. | ||||
| SfeLAN1PortQueuePriority | 1.3.6.1.4.1.27304.12.2.3.9 | OCTET STRING (SIZE (0..100)) | RW | |
scalar · OCTET STRING (SIZE (0..100)) · read-write · current Queue priority, input parameters: PRIO:ENABLE PRIO: 0 - 7 ENABLE: 0 - 1 | ||||
| SfeLAN1PortQoSPortMapRule | 1.3.6.1.4.1.27304.12.2.3.10 | INTEGER (0..1) | RW | |
scalar · INTEGER (0..1) · read-write · current Forces queue priority for a port. Set to 1 for enable and 0 for disable. | ||||
| SfeLAN1PortVIDNRLEnable | 1.3.6.1.4.1.27304.12.2.3.11 | INTEGER (0..1) | RW | |
scalar · INTEGER (0..1) · read-write · current Enables/disables per port the Non rate limit for VLANs with the NRL bit enabled. Set to 1 for enable and 0 for disable. | ||||
| SfeLAN1PortMap2PIRL | 1.3.6.1.4.1.27304.12.2.3.12 | INTEGER (0..11) | WO | |
scalar · INTEGER (0..11) · write-only · current Adds/maps the port to a Port Ingress Rate Limitation (PIRL) bucket. Input parameter is PIRL bucket no 0 - 11. | ||||
| SfeLAN1PortDeletePortMap2PIRL | 1.3.6.1.4.1.27304.12.2.3.13 | INTEGER (0..11) | WO | |
scalar · INTEGER (0..11) · write-only · current Deletes the port from a Port Ingress Rate Limitation (PIRL) bucket. Input parameter is PIRL bucket no 0 - 11. | ||||
| SfeLAN1PortEgressRateLimitation | 1.3.6.1.4.1.27304.12.2.3.14 | Integer32 | RW | |
scalar · Integer32 · read-write · current Sets the egress limitation rate for the port. Input parameter is value in kbps | ||||
| SfeLAN1PortIngressRateLimitation | 1.3.6.1.4.1.27304.12.2.3.15 | OCTET STRING (SIZE (0..100)) | WO | |
scalar · OCTET STRING (SIZE (0..100)) · write-only · current Sets a Port Input Rate Limit(PIRL) bucket. Input parameters are: bucket:rate:layer:(DROP|FC) | ||||
| SfeLAN1PortDefaultVLAN | 1.3.6.1.4.1.27304.12.2.3.16 | INTEGER | RW | |
scalar · INTEGER · read-write · current Sets the default VLAN ID(VID) for the port. Input parameter is 0 - 4095 | ||||
| SfeLAN1PortForceDefaultVID | 1.3.6.1.4.1.27304.12.2.3.17 | INTEGER (0..1) | RW | |
scalar · INTEGER (0..1) · read-write · current Forces the tagging of VID on all frames on the port. Set to 1 for enable and 0 for disable. | ||||
| SfeLAN1PortVLANPortMode | 1.3.6.1.4.1.27304.12.2.3.18 | INTEGER (0..3) | RW | |
scalar · INTEGER (0..3) · read-write · current Sets the 802.1Q mode for the ingress port.
Mode either 0=disable,
1=fallback,
2=check,
3=secure | ||||
| SfeLAN1PortBlockAllUnknown | 1.3.6.1.4.1.27304.12.2.3.19 | INTEGER (0..1) | RW | |
scalar · INTEGER (0..1) · read-write · current This will make sure that all frames received on the port are blocked, unless they are tagged with the correct VID. | ||||
| SfeLAN1PortIGMPSnooping | 1.3.6.1.4.1.27304.12.2.3.20 | INTEGER (0..1) | RW | |
scalar · INTEGER (0..1) · read-write · current Enables/disables IGMP snooping. Set to 1 for enable and 0 for disable. | ||||
| SfeLAN1PortAddUnicast | 1.3.6.1.4.1.27304.12.2.3.21 | OCTET STRING (SIZE (0..100)) | WO | |
scalar · OCTET STRING (SIZE (0..100)) · write-only · current Adds the unicast mac address statically to the Address Translation Unit (ATU) Switch table. Input parameter is: aa:bb:cc:dd:ee:ff | ||||
| SfeLAN1PortAddMulticast | 1.3.6.1.4.1.27304.12.2.3.22 | IpAddress | WO | |
scalar · IpAddress · write-only · current Adds the IP multicast address statically to the Address Translation Unit (ATU) Switch table. Input parameter is: aaa.bbb.ccc.ddd | ||||
| SfeLAN1PortArpMirroring | 1.3.6.1.4.1.27304.12.2.3.23 | INTEGER (0..1) | RW | |
scalar · INTEGER (0..1) · read-write · current Mirror ARP packets seen on the port to the CPU port. | ||||
| NfeLAN2Port | 1.3.6.1.4.1.27304.12.2.4 | |||
| SfeLAN2PortAutoNegotiation | 1.3.6.1.4.1.27304.12.2.4.1 | INTEGER (0..10) | RW | |
scalar · INTEGER (0..10) · read-write · current Enables/disables auto negotiation on the port. Set to 1 for enable and 0 for disable. | ||||
| SfeLAN2PortSpeedMode | 1.3.6.1.4.1.27304.12.2.4.2 | OCTET STRING (SIZE (0..10)) | RW | |
scalar · OCTET STRING (SIZE (0..10)) · read-write · current Sets/gets the speed and duplex mode on the port. Valid values are (100FD|100HD|10FD|10HD|AUTO|FD|HD) | ||||
| SfeLAN2PortLinkStatus | 1.3.6.1.4.1.27304.12.2.4.3 | INTEGER (0..1) | RO | |
scalar · INTEGER (0..1) · read-only · current Gets the Link status for the port | ||||
| SfeLAN2PortFlowControl | 1.3.6.1.4.1.27304.12.2.4.4 | INTEGER (0..1) | RW | |
scalar · INTEGER (0..1) · read-write · current Enables/disables flow control on the port. Set to 1 for enable and 0 for disable. | ||||
| SfeLAN2PortIEEEQoSPriority | 1.3.6.1.4.1.27304.12.2.4.5 | INTEGER (0..1) | RW | |
scalar · INTEGER (0..1) · read-write · current Enables prioritized frames based on there IEEE priority tags. Set to 1 for enable and 0 for disable. | ||||
| SfeLAN2PortIPQoSPriority | 1.3.6.1.4.1.27304.12.2.4.6 | INTEGER (0..1) | RW | |
scalar · INTEGER (0..1) · read-write · current Enables prioritized frames based on their IP4/IP6 priority fields. Set to 1 for enable and 0 for disable. | ||||
| SfeLAN2PortFramePriorityOverwrite | 1.3.6.1.4.1.27304.12.2.4.7 | OCTET STRING (SIZE (0..100)) | RW | |
scalar · OCTET STRING (SIZE (0..100)) · read-write · current Source Address(SA) or Destination Address(DA) Frame Priority Override on an ATU match. XX_FRAME_PRIO_OVERRIDE=0..1. | ||||
| SfeLAN2PortQueuePriorityOverwrite | 1.3.6.1.4.1.27304.12.2.4.8 | OCTET STRING (SIZE (0..100)) | RW | |
scalar · OCTET STRING (SIZE (0..100)) · read-write · current Source Address(SA) or Destination Address(SA) Queue Priority Override on an ATU match. XX_QUEUE_PRIO_OVERRIDE=0..1. | ||||
| SfeLAN2PortQueuePriority | 1.3.6.1.4.1.27304.12.2.4.9 | OCTET STRING (SIZE (0..100)) | RW | |
scalar · OCTET STRING (SIZE (0..100)) · read-write · current Queue priority, input parameters: PRIO:ENABLE PRIO: 0 - 7 ENABLE: 0 - 1 | ||||
| SfeLAN2PortQoSPortMapRule | 1.3.6.1.4.1.27304.12.2.4.10 | INTEGER (0..1) | RW | |
scalar · INTEGER (0..1) · read-write · current Forces queue priority for a port. Set to 1 for enable and 0 for disable. | ||||
| SfeLAN2PortVIDNRLEnable | 1.3.6.1.4.1.27304.12.2.4.11 | INTEGER (0..1) | RW | |
scalar · INTEGER (0..1) · read-write · current Enables/disables per port the Non rate limit for VLANs with the NRL bit enabled. Set to 1 for enable and 0 for disable. | ||||
| SfeLAN2PortMap2PIRL | 1.3.6.1.4.1.27304.12.2.4.12 | INTEGER (0..11) | WO | |
scalar · INTEGER (0..11) · write-only · current Adds/maps the port to a Port Ingress Rate Limitation (PIRL) bucket. Input parameter is PIRL bucket no 0 - 11. | ||||
| SfeLAN2PortDeletePortMap2PIRL | 1.3.6.1.4.1.27304.12.2.4.13 | INTEGER (0..11) | WO | |
scalar · INTEGER (0..11) · write-only · current Deletes the port from a Port Ingress Rate Limitation (PIRL) bucket. Input parameter is PIRL bucket no 0 - 11. | ||||
| SfeLAN2PortEgressRateLimitation | 1.3.6.1.4.1.27304.12.2.4.14 | Integer32 | RW | |
scalar · Integer32 · read-write · current Sets the egress limitation rate for the port. Input parameter is value in kbps | ||||
| SfeLAN2PortIngressRateLimitation | 1.3.6.1.4.1.27304.12.2.4.15 | OCTET STRING (SIZE (0..100)) | WO | |
scalar · OCTET STRING (SIZE (0..100)) · write-only · current Sets a Port Input Rate Limit(PIRL) bucket. Input parameters are: bucket:rate:layer:(DROP|FC) | ||||
| SfeLAN2PortDefaultVLAN | 1.3.6.1.4.1.27304.12.2.4.16 | INTEGER | RW | |
scalar · INTEGER · read-write · current Sets the default VLAN ID(VID) for the port. Input parameter is 0 - 4095 | ||||
| SfeLAN2PortForceDefaultVID | 1.3.6.1.4.1.27304.12.2.4.17 | INTEGER (0..1) | RW | |
scalar · INTEGER (0..1) · read-write · current Forces the tagging of VID on all frames on the port. Set to 1 for enable and 0 for disable. | ||||
| SfeLAN2PortVLANPortMode | 1.3.6.1.4.1.27304.12.2.4.18 | INTEGER (0..3) | RW | |
scalar · INTEGER (0..3) · read-write · current Sets the 802.1Q mode for the ingress port.
Mode either 0=disable,
1=fallback,
2=check,
3=secure | ||||
| SfeLAN2PortBlockAllUnknown | 1.3.6.1.4.1.27304.12.2.4.19 | INTEGER (0..1) | RW | |
scalar · INTEGER (0..1) · read-write · current This will make sure that all frames received on the port are blocked, unless they are tagged with the correct VID. | ||||
| SfeLAN2PortIGMPSnooping | 1.3.6.1.4.1.27304.12.2.4.20 | INTEGER (0..1) | RW | |
scalar · INTEGER (0..1) · read-write · current Enables/disables IGMP snooping. Set to 1 for enable and 0 for disable. | ||||
| SfeLAN2PortAddUnicast | 1.3.6.1.4.1.27304.12.2.4.21 | OCTET STRING (SIZE (0..100)) | WO | |
scalar · OCTET STRING (SIZE (0..100)) · write-only · current Adds the unicast mac address statically to the Address Translation Unit (ATU) Switch table. Input parameter is: aa:bb:cc:dd:ee:ff | ||||
| SfeLAN2PortAddMulticast | 1.3.6.1.4.1.27304.12.2.4.22 | IpAddress | WO | |
scalar · IpAddress · write-only · current Adds the IP multicast address statically to the Address Translation Unit (ATU) Switch table. Input parameter is: aaa.bbb.ccc.ddd | ||||
| SfeLAN2PortArpMirroring | 1.3.6.1.4.1.27304.12.2.4.23 | INTEGER (0..1) | RW | |
scalar · INTEGER (0..1) · read-write · current Mirror ARP packets seen on the port to the CPU port. | ||||
| NfeLAN3Port | 1.3.6.1.4.1.27304.12.2.5 | |||
| SfeLAN3PortAutoNegotiation | 1.3.6.1.4.1.27304.12.2.5.1 | INTEGER (0..10) | RW | |
scalar · INTEGER (0..10) · read-write · current Enables/disables auto negotiation on the port. Set to 1 for enable and 0 for disable. | ||||
| SfeLAN3PortSpeedMode | 1.3.6.1.4.1.27304.12.2.5.2 | OCTET STRING (SIZE (0..10)) | RW | |
scalar · OCTET STRING (SIZE (0..10)) · read-write · current Sets/gets the speed and duplex mode on the port. Valid values are (100FD|100HD|10FD|10HD|AUTO|FD|HD) | ||||
| SfeLAN3PortLinkStatus | 1.3.6.1.4.1.27304.12.2.5.3 | INTEGER (0..1) | RO | |
scalar · INTEGER (0..1) · read-only · current Gets the Link status for the port | ||||
| SfeLAN3PortFlowControl | 1.3.6.1.4.1.27304.12.2.5.4 | INTEGER (0..1) | RW | |
scalar · INTEGER (0..1) · read-write · current Enables/disables flow control on the port. Set to 1 for enable and 0 for disable. | ||||
| SfeLAN3PortIEEEQoSPriority | 1.3.6.1.4.1.27304.12.2.5.5 | INTEGER (0..1) | RW | |
scalar · INTEGER (0..1) · read-write · current Enables prioritized frames based on there IEEE priority tags. Set to 1 for enable and 0 for disable. | ||||
| SfeLAN3PortIPQoSPriority | 1.3.6.1.4.1.27304.12.2.5.6 | INTEGER (0..1) | RW | |
scalar · INTEGER (0..1) · read-write · current Enables prioritized frames based on their IP4/IP6 priority fields. Set to 1 for enable and 0 for disable. | ||||
| SfeLAN3PortFramePriorityOverwrite | 1.3.6.1.4.1.27304.12.2.5.7 | OCTET STRING (SIZE (0..100)) | RW | |
scalar · OCTET STRING (SIZE (0..100)) · read-write · current Source Address(SA) or Destination Address(DA) Frame Priority Override on an ATU match. XX_FRAME_PRIO_OVERRIDE=0..1. | ||||
| SfeLAN3PortQueuePriorityOverwrite | 1.3.6.1.4.1.27304.12.2.5.8 | OCTET STRING (SIZE (0..100)) | RW | |
scalar · OCTET STRING (SIZE (0..100)) · read-write · current Source Address(SA) or Destination Address(SA) Queue Priority Override on an ATU match. XX_QUEUE_PRIO_OVERRIDE=0..1. | ||||
| SfeLAN3PortQueuePriority | 1.3.6.1.4.1.27304.12.2.5.9 | OCTET STRING (SIZE (0..100)) | RW | |
scalar · OCTET STRING (SIZE (0..100)) · read-write · current Queue priority, input parameters: PRIO:ENABLE PRIO: 0 - 7 ENABLE: 0 - 1 | ||||
| SfeLAN3PortQoSPortMapRule | 1.3.6.1.4.1.27304.12.2.5.10 | INTEGER (0..1) | RW | |
scalar · INTEGER (0..1) · read-write · current Forces queue priority for a port. Set to 1 for enable and 0 for disable. | ||||
| SfeLAN3PortVIDNRLEnable | 1.3.6.1.4.1.27304.12.2.5.11 | INTEGER (0..1) | RW | |
scalar · INTEGER (0..1) · read-write · current Enables/disables per port the Non rate limit for VLANs with the NRL bit enabled. Set to 1 for enable and 0 for disable. | ||||
| SfeLAN3PortMap2PIRL | 1.3.6.1.4.1.27304.12.2.5.12 | INTEGER (0..11) | WO | |
scalar · INTEGER (0..11) · write-only · current Adds/maps the port to a Port Ingress Rate Limitation (PIRL) bucket. Input parameter is PIRL bucket no 0 - 11. | ||||
| SfeLAN3PortDeletePortMap2PIRL | 1.3.6.1.4.1.27304.12.2.5.13 | INTEGER (0..11) | WO | |
scalar · INTEGER (0..11) · write-only · current Deletes the port from a Port Ingress Rate Limitation (PIRL) bucket. Input parameter is PIRL bucket no 0 - 11. | ||||
| SfeLAN3PortEgressRateLimitation | 1.3.6.1.4.1.27304.12.2.5.14 | Integer32 | RW | |
scalar · Integer32 · read-write · current Sets the egress limitation rate for the port. Input parameter is value in kbps | ||||
| SfeLAN3PortIngressRateLimitation | 1.3.6.1.4.1.27304.12.2.5.15 | OCTET STRING (SIZE (0..100)) | WO | |
scalar · OCTET STRING (SIZE (0..100)) · write-only · current Sets a Port Input Rate Limit(PIRL) bucket. Input parameters are: bucket:rate:layer:(DROP|FC) | ||||
| SfeLAN3PortDefaultVLAN | 1.3.6.1.4.1.27304.12.2.5.16 | INTEGER | RW | |
scalar · INTEGER · read-write · current Sets the default VLAN ID(VID) for the port. Input parameter is 0 - 4095 | ||||
| SfeLAN3PortForceDefaultVID | 1.3.6.1.4.1.27304.12.2.5.17 | INTEGER (0..1) | RW | |
scalar · INTEGER (0..1) · read-write · current Forces the tagging of VID on all frames on the port. Set to 1 for enable and 0 for disable. | ||||
| SfeLAN3PortVLANPortMode | 1.3.6.1.4.1.27304.12.2.5.18 | INTEGER (0..3) | RW | |
scalar · INTEGER (0..3) · read-write · current Sets the 802.1Q mode for the ingress port.
Mode either 0=disable,
1=fallback,
2=check,
3=secure | ||||
| SfeLAN3PortBlockAllUnknown | 1.3.6.1.4.1.27304.12.2.5.19 | INTEGER (0..1) | RW | |
scalar · INTEGER (0..1) · read-write · current This will make sure that all frames received on the port are blocked, unless they are tagged with the correct VID. | ||||
| SfeLAN3PortIGMPSnooping | 1.3.6.1.4.1.27304.12.2.5.20 | INTEGER (0..1) | RW | |
scalar · INTEGER (0..1) · read-write · current Enables/disables IGMP snooping. Set to 1 for enable and 0 for disable. | ||||
| SfeLAN3PortAddUnicast | 1.3.6.1.4.1.27304.12.2.5.21 | OCTET STRING (SIZE (0..100)) | WO | |
scalar · OCTET STRING (SIZE (0..100)) · write-only · current Adds the unicast mac address statically to the Address Translation Unit (ATU) Switch table. Input parameter is: aa:bb:cc:dd:ee:ff | ||||
| SfeLAN3PortAddMulticast | 1.3.6.1.4.1.27304.12.2.5.22 | IpAddress | WO | |
scalar · IpAddress · write-only · current Adds the IP multicast address statically to the Address Translation Unit (ATU) Switch table. Input parameter is: aaa.bbb.ccc.ddd | ||||
| SfeLAN3PortArpMirroring | 1.3.6.1.4.1.27304.12.2.5.23 | INTEGER (0..1) | RW | |
scalar · INTEGER (0..1) · read-write · current Mirror ARP packets seen on the port to the CPU port. | ||||
| NfeLAN4Port | 1.3.6.1.4.1.27304.12.2.6 | |||
| SfeLAN4PortAutoNegotiation | 1.3.6.1.4.1.27304.12.2.6.1 | INTEGER (0..10) | RW | |
scalar · INTEGER (0..10) · read-write · current Enables/disables auto negotiation on the port. Set to 1 for enable and 0 for disable. | ||||
| SfeLAN4PortSpeedMode | 1.3.6.1.4.1.27304.12.2.6.2 | OCTET STRING (SIZE (0..10)) | RW | |
scalar · OCTET STRING (SIZE (0..10)) · read-write · current Sets/gets the speed and duplex mode on the port. Valid values are (100FD|100HD|10FD|10HD|AUTO|FD|HD) | ||||
| SfeLAN4PortLinkStatus | 1.3.6.1.4.1.27304.12.2.6.3 | INTEGER (0..1) | RO | |
scalar · INTEGER (0..1) · read-only · current Gets the Link status for the port | ||||
| SfeLAN4PortFlowControl | 1.3.6.1.4.1.27304.12.2.6.4 | INTEGER (0..1) | RW | |
scalar · INTEGER (0..1) · read-write · current Enables/disables flow control on the port. Set to 1 for enable and 0 for disable. | ||||
| SfeLAN4PortIEEEQoSPriority | 1.3.6.1.4.1.27304.12.2.6.5 | INTEGER (0..1) | RW | |
scalar · INTEGER (0..1) · read-write · current Enables prioritized frames based on there IEEE priority tags. Set to 1 for enable and 0 for disable. | ||||
| SfeLAN4PortIPQoSPriority | 1.3.6.1.4.1.27304.12.2.6.6 | INTEGER (0..1) | RW | |
scalar · INTEGER (0..1) · read-write · current Enables prioritized frames based on their IP4/IP6 priority fields. Set to 1 for enable and 0 for disable. | ||||
| SfeLAN4PortFramePriorityOverwrite | 1.3.6.1.4.1.27304.12.2.6.7 | OCTET STRING (SIZE (0..100)) | RW | |
scalar · OCTET STRING (SIZE (0..100)) · read-write · current Source Address(SA) or Destination Address(DA) Frame Priority Override on an ATU match. XX_FRAME_PRIO_OVERRIDE=0..1. | ||||
| SfeLAN4PortQueuePriorityOverwrite | 1.3.6.1.4.1.27304.12.2.6.8 | OCTET STRING (SIZE (0..100)) | RW | |
scalar · OCTET STRING (SIZE (0..100)) · read-write · current Source Address(SA) or Destination Address(SA) Queue Priority Override on an ATU match. XX_QUEUE_PRIO_OVERRIDE=0..1. | ||||
| SfeLAN4PortQueuePriority | 1.3.6.1.4.1.27304.12.2.6.9 | OCTET STRING (SIZE (0..100)) | RW | |
scalar · OCTET STRING (SIZE (0..100)) · read-write · current Queue priority, input parameters: PRIO:ENABLE PRIO: 0 - 7 ENABLE: 0 - 1 | ||||
| SfeLAN4PortQoSPortMapRule | 1.3.6.1.4.1.27304.12.2.6.10 | INTEGER (0..1) | RW | |
scalar · INTEGER (0..1) · read-write · current Forces queue priority for a port. Set to 1 for enable and 0 for disable. | ||||
| SfeLAN4PortVIDNRLEnable | 1.3.6.1.4.1.27304.12.2.6.11 | INTEGER (0..1) | RW | |
scalar · INTEGER (0..1) · read-write · current Enables/disables per port the Non rate limit for VLANs with the NRL bit enabled. Set to 1 for enable and 0 for disable. | ||||
| SfeLAN4PortMap2PIRL | 1.3.6.1.4.1.27304.12.2.6.12 | INTEGER (0..11) | WO | |
scalar · INTEGER (0..11) · write-only · current Adds/maps the port to a Port Ingress Rate Limitation (PIRL) bucket. Input parameter is PIRL bucket no 0 - 11. | ||||
| SfeLAN4PortDeletePortMap2PIRL | 1.3.6.1.4.1.27304.12.2.6.13 | INTEGER (0..11) | WO | |
scalar · INTEGER (0..11) · write-only · current Deletes the port from a Port Ingress Rate Limitation (PIRL) bucket. Input parameter is PIRL bucket no 0 - 11. | ||||
| SfeLAN4PortEgressRateLimitation | 1.3.6.1.4.1.27304.12.2.6.14 | Integer32 | RW | |
scalar · Integer32 · read-write · current Sets the egress limitation rate for the port. Input parameter is value in kbps | ||||
| SfeLAN4PortIngressRateLimitation | 1.3.6.1.4.1.27304.12.2.6.15 | OCTET STRING (SIZE (0..100)) | WO | |
scalar · OCTET STRING (SIZE (0..100)) · write-only · current Sets a Port Input Rate Limit(PIRL) bucket. Input parameters are: bucket:rate:layer:(DROP|FC) | ||||
| SfeLAN4PortDefaultVLAN | 1.3.6.1.4.1.27304.12.2.6.16 | INTEGER | RW | |
scalar · INTEGER · read-write · current Sets the default VLAN ID(VID) for the port. Input parameter is 0 - 4095 | ||||
| SfeLAN4PortForceDefaultVID | 1.3.6.1.4.1.27304.12.2.6.17 | INTEGER (0..1) | RW | |
scalar · INTEGER (0..1) · read-write · current Forces the tagging of VID on all frames on the port. Set to 1 for enable and 0 for disable. | ||||
| SfeLAN4PortVLANPortMode | 1.3.6.1.4.1.27304.12.2.6.18 | INTEGER (0..3) | RW | |
scalar · INTEGER (0..3) · read-write · current Sets the 802.1Q mode for the ingress port.
Mode either 0=disable,
1=fallback,
2=check,
3=secure | ||||
| SfeLAN4PortBlockAllUnknown | 1.3.6.1.4.1.27304.12.2.6.19 | INTEGER (0..1) | RW | |
scalar · INTEGER (0..1) · read-write · current This will make sure that all frames received on the port are blocked, unless they are tagged with the correct VID. | ||||
| SfeLAN4PortIGMPSnooping | 1.3.6.1.4.1.27304.12.2.6.20 | INTEGER (0..1) | RW | |
scalar · INTEGER (0..1) · read-write · current Enables/disables IGMP snooping. Set to 1 for enable and 0 for disable. | ||||
| SfeLAN4PortAddUnicast | 1.3.6.1.4.1.27304.12.2.6.21 | OCTET STRING (SIZE (0..100)) | WO | |
scalar · OCTET STRING (SIZE (0..100)) · write-only · current Adds the unicast mac address statically to the Address Translation Unit (ATU) Switch table. Input parameter is: aa:bb:cc:dd:ee:ff | ||||
| SfeLAN4PortAddMulticast | 1.3.6.1.4.1.27304.12.2.6.22 | IpAddress | WO | |
scalar · IpAddress · write-only · current Adds the IP multicast address statically to the Address Translation Unit (ATU) Switch table. Input parameter is: aaa.bbb.ccc.ddd | ||||
| SfeLAN4PortArpMirroring | 1.3.6.1.4.1.27304.12.2.6.23 | INTEGER (0..1) | RW | |
scalar · INTEGER (0..1) · read-write · current Mirror ARP packets seen on the port to the CPU port. | ||||
| GfeModuleGroup | 1.3.6.1.4.1.27304.12.4 | |||
group · current The objects are related to the DKTCOMEGA Fast Ethernet module, MIB rev 02_00.
| ||||