Lambdatrail2s-MIB
Deltanet AGThe MIB module for managing Deltanet Lambdatrail2-S device. Needs firmware 1.1.0 or higher.
snmptranslate -m Lambdatrail2s-MIB -Tpsnmpwalk -v2c -c <community> -m Lambdatrail2s-MIB <host> 1.3.6.1.4.1.35616.5Imports
| Deltanet-MIB | deltanet |
|---|---|
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | Bits, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso |
| SNMPv2-TC | DisplayString, PhysAddress, TEXTUAL-CONVENTION |
OID tree
| Name | OID | Type | Access | Status | Example | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Ilambdatrail2s | 1.3.6.1.4.1.35616.5 | ||||||||||||||||
identity The MIB module for managing Deltanet Lambdatrail2-S device. Needs firmware 1.1.0 or higher. | |||||||||||||||||
| Nlt2sNotifications | 1.3.6.1.4.1.35616.5.0 | ||||||||||||||||
| !lt2sMgmtStartup | 1.3.6.1.4.1.35616.5.0.1 | ||||||||||||||||
| !lt2sMgmtAuthenticationFailure | 1.3.6.1.4.1.35616.5.0.2 | ||||||||||||||||
| !lt2sTemperatureHigh | 1.3.6.1.4.1.35616.5.0.3 | ||||||||||||||||
| !lt2sTemperatureNormal | 1.3.6.1.4.1.35616.5.0.4 | ||||||||||||||||
notification · current Device temperature is back to normal. Lower than 40 degrees celsius.
| |||||||||||||||||
| !lt2sPowerSupplyPluggedIn | 1.3.6.1.4.1.35616.5.0.5 | ||||||||||||||||
| !lt2sPowerSupplyPluggedOut | 1.3.6.1.4.1.35616.5.0.6 | ||||||||||||||||
| !lt2sPowerNormal | 1.3.6.1.4.1.35616.5.0.7 | ||||||||||||||||
| !lt2sPowerFailure | 1.3.6.1.4.1.35616.5.0.8 | ||||||||||||||||
| !lt2sFanOn | 1.3.6.1.4.1.35616.5.0.9 | ||||||||||||||||
| !lt2sFanOff | 1.3.6.1.4.1.35616.5.0.10 | ||||||||||||||||
| !lt2sFanFailure | 1.3.6.1.4.1.35616.5.0.11 | ||||||||||||||||
| !lt2sMgmtSfpPluggedIn | 1.3.6.1.4.1.35616.5.0.12 | ||||||||||||||||
notification · current SFP transceiver is plugged in on management port. | |||||||||||||||||
| !lt2sMgmtSfpPluggedOut | 1.3.6.1.4.1.35616.5.0.13 | ||||||||||||||||
notification · current SFP transceiver is plugged out on management port. | |||||||||||||||||
| !lt2sMgmtLinkUp | 1.3.6.1.4.1.35616.5.0.14 | ||||||||||||||||
notification · current A link goes up in one of the management ports. | |||||||||||||||||
| !lt2sMgmtLinkDown | 1.3.6.1.4.1.35616.5.0.15 | ||||||||||||||||
notification · current A link goes down in one of the management ports. | |||||||||||||||||
| !lt2sMgmtTxLow | 1.3.6.1.4.1.35616.5.0.16 | ||||||||||||||||
notification · current Transceiver TX power is low in the management port. | |||||||||||||||||
| !lt2sMgmtTxHigh | 1.3.6.1.4.1.35616.5.0.17 | ||||||||||||||||
notification · current Transceiver TX power is high in the management port. | |||||||||||||||||
| !lt2sMgmtTxNormal | 1.3.6.1.4.1.35616.5.0.18 | ||||||||||||||||
notification · current Transceiver TX power is normal in the management port. | |||||||||||||||||
| !lt2sMgmtRxLow | 1.3.6.1.4.1.35616.5.0.19 | ||||||||||||||||
notification · current Transceiver RX power is low in the management port. | |||||||||||||||||
| !lt2sMgmtRxHigh | 1.3.6.1.4.1.35616.5.0.20 | ||||||||||||||||
notification · current Transceiver RX power is high in the management port. | |||||||||||||||||
| !lt2sMgmtRxNormal | 1.3.6.1.4.1.35616.5.0.21 | ||||||||||||||||
notification · current Transceiver RX power is normal in the management port. | |||||||||||||||||
| !lt2sPortEnabled | 1.3.6.1.4.1.35616.5.0.22 | ||||||||||||||||
notification · current Port is administrative enabled.
| |||||||||||||||||
| !lt2sPortDisabled | 1.3.6.1.4.1.35616.5.0.23 | ||||||||||||||||
notification · current Port is administrative disabled.
| |||||||||||||||||
| !lt2sPortReseted | 1.3.6.1.4.1.35616.5.0.24 | ||||||||||||||||
| !lt2sPortThermalShutdown | 1.3.6.1.4.1.35616.5.0.25 | ||||||||||||||||
notification · current A thermal shut down in one of the ports.
| |||||||||||||||||
| !lt2sPortThermalWakeup | 1.3.6.1.4.1.35616.5.0.26 | ||||||||||||||||
notification · current A thermal wakeup in one of the ports.
| |||||||||||||||||
| !lt2sLinePluggedIn | 1.3.6.1.4.1.35616.5.0.27 | ||||||||||||||||
notification · current A SFP transceiver is plugged in, on one of the ports.
| |||||||||||||||||
| !lt2sClientPluggedIn | 1.3.6.1.4.1.35616.5.0.28 | ||||||||||||||||
notification · current A SFP transceiver is plugged in, on one of the ports.
| |||||||||||||||||
| !lt2sLinePluggedOut | 1.3.6.1.4.1.35616.5.0.29 | ||||||||||||||||
notification · current A SFP transceiver is plugged out, on one of the ports.
| |||||||||||||||||
| !lt2sClientPluggedOut | 1.3.6.1.4.1.35616.5.0.30 | ||||||||||||||||
notification · current A SFP transceiver is plugged out, on one of the ports.
| |||||||||||||||||
| !lt2sLineLinkUp | 1.3.6.1.4.1.35616.5.0.31 | ||||||||||||||||
notification · current A SFP transceiver's link goes up in one of the ports.
| |||||||||||||||||
| !lt2sClientLinkUp | 1.3.6.1.4.1.35616.5.0.32 | ||||||||||||||||
notification · current A SFP transceiver's link goes up in one of the ports.
| |||||||||||||||||
| !lt2sLineLinkDown | 1.3.6.1.4.1.35616.5.0.33 | ||||||||||||||||
notification · current A SFP transceiver's link goes down in one of the ports.
| |||||||||||||||||
| !lt2sClientLinkDown | 1.3.6.1.4.1.35616.5.0.34 | ||||||||||||||||
notification · current A SFP transceiver's link goes down in one of the ports.
| |||||||||||||||||
| !lt2sLineLoopOn | 1.3.6.1.4.1.35616.5.0.35 | ||||||||||||||||
notification · current A Line loop is activated in one of the ports.
| |||||||||||||||||
| !lt2sLineLoopOff | 1.3.6.1.4.1.35616.5.0.36 | ||||||||||||||||
notification · current A Line loop is turned off in one of the ports.
| |||||||||||||||||
| !lt2sClientLoopOn | 1.3.6.1.4.1.35616.5.0.37 | ||||||||||||||||
notification · current A Client loop is activated in one of the ports.
| |||||||||||||||||
| !lt2sClientLoopOff | 1.3.6.1.4.1.35616.5.0.38 | ||||||||||||||||
notification · current A Client loop is turned off in one of the ports.
| |||||||||||||||||
| !lt2sPortTxLow | 1.3.6.1.4.1.35616.5.0.39 | ||||||||||||||||
notification · current A SFP transceiver TX power is low in one of the ports.
| |||||||||||||||||
| !lt2sPortTxHigh | 1.3.6.1.4.1.35616.5.0.40 | ||||||||||||||||
notification · current A SFP transceiver TX power is high in one of the ports.
| |||||||||||||||||
| !lt2sPortTxNormal | 1.3.6.1.4.1.35616.5.0.41 | ||||||||||||||||
notification · current A SFP transceiver TX power is normal in one of the ports.
| |||||||||||||||||
| !lt2sPortRxLow | 1.3.6.1.4.1.35616.5.0.42 | ||||||||||||||||
notification · current A SFP transceiver RX power is low in one of the ports.
| |||||||||||||||||
| !lt2sPortRxHigh | 1.3.6.1.4.1.35616.5.0.43 | ||||||||||||||||
notification · current A SFP transceiver RX power is high in one of the ports.
| |||||||||||||||||
| !lt2sPortRxNormal | 1.3.6.1.4.1.35616.5.0.44 | ||||||||||||||||
notification · current A SFP transceiver RX power is normal in one of the ports.
| |||||||||||||||||
| Nlt2sAgent | 1.3.6.1.4.1.35616.5.1 | ||||||||||||||||
| Slt2sDescription | 1.3.6.1.4.1.35616.5.1.1 | DisplayString (SIZE (1..63)) | RO | ||||||||||||||
scalar · DisplayString (SIZE (1..63)) · read-only · current Shows the System Description. | |||||||||||||||||
| Slt2sDeviceType | 1.3.6.1.4.1.35616.5.1.2 | DisplayString (SIZE (1..16)) | RO | LT2-S | |||||||||||||
scalar · DisplayString (SIZE (1..16)) · read-only · current Shows the Device Type. Example values from LibreNMS test devices
| |||||||||||||||||
| Slt2sHwRevision | 1.3.6.1.4.1.35616.5.1.3 | DisplayString (SIZE (1..16)) | RO | ||||||||||||||
scalar · DisplayString (SIZE (1..16)) · read-only · current Shows the Device Type. | |||||||||||||||||
| Slt2sManufacturingDate | 1.3.6.1.4.1.35616.5.1.4 | DisplayString (SIZE (1..16)) | RO | ||||||||||||||
scalar · DisplayString (SIZE (1..16)) · read-only · current Shows the Device Type. | |||||||||||||||||
| Slt2sSerialNumber | 1.3.6.1.4.1.35616.5.1.5 | DisplayString (SIZE (1..16)) | RO | 12000039 | |||||||||||||
scalar · DisplayString (SIZE (1..16)) · read-only · current Shows the serial number of the device. Example values from LibreNMS test devices
| |||||||||||||||||
| Slt2sSystemName | 1.3.6.1.4.1.35616.5.1.6 | DisplayString (SIZE (0..63)) | RW | ||||||||||||||
scalar · DisplayString (SIZE (0..63)) · read-write · current The assigned system name. | |||||||||||||||||
| Slt2sSystemLocation | 1.3.6.1.4.1.35616.5.1.7 | DisplayString (SIZE (0..63)) | RW | ||||||||||||||
scalar · DisplayString (SIZE (0..63)) · read-write · current System location. | |||||||||||||||||
| Slt2sSystemContact | 1.3.6.1.4.1.35616.5.1.8 | DisplayString (SIZE (0..63)) | RW | ||||||||||||||
scalar · DisplayString (SIZE (0..63)) · read-write · current The responsible person. | |||||||||||||||||
| Slt2sSystemUptime | 1.3.6.1.4.1.35616.5.1.9 | DisplayString (SIZE (1..31)) | RO | ||||||||||||||
scalar · DisplayString (SIZE (1..31)) · read-only · current Shows the time since the last restart of the management agent. | |||||||||||||||||
| Slt2sFirmwareVersion | 1.3.6.1.4.1.35616.5.1.10 | DisplayString (SIZE (1..63)) | RO | 1.0.7, Mon, 04 Dec 2017 10:31:09 | |||||||||||||
scalar · DisplayString (SIZE (1..63)) · read-only · current Shows the software version of the agent running image. Example values from LibreNMS test devices
| |||||||||||||||||
| Slt2suCVersion | 1.3.6.1.4.1.35616.5.1.11 | DisplayString (SIZE (1..63)) | RO | ||||||||||||||
scalar · DisplayString (SIZE (1..63)) · read-only · current Shows the firmware version of the micro controller. | |||||||||||||||||
| Slt2sSaveRunningCfg | 1.3.6.1.4.1.35616.5.1.12 | INTEGER | RW | ||||||||||||||
scalar · INTEGER · read-write · current Set this variable will save current configuration. The value is set back to 1 after succeed.
| |||||||||||||||||
| Slt2sResetAgent | 1.3.6.1.4.1.35616.5.1.13 | INTEGER | RW | ||||||||||||||
scalar · INTEGER · read-write · current Set this variable will reset the agent. The value is set back to 1 after reset.
| |||||||||||||||||
| Slt2sSnmpGetCommunity | 1.3.6.1.4.1.35616.5.1.14 | DisplayString (SIZE (0..63)) | RW | ||||||||||||||
scalar · DisplayString (SIZE (0..63)) · read-write · current The get community, read only. | |||||||||||||||||
| Slt2sSnmpSetCommunity | 1.3.6.1.4.1.35616.5.1.15 | DisplayString (SIZE (0..63)) | RW | ||||||||||||||
scalar · DisplayString (SIZE (0..63)) · read-write · current The set community, read/write. | |||||||||||||||||
| Slt2sIp4DHCP | 1.3.6.1.4.1.35616.5.1.16 | INTEGER | RW | ||||||||||||||
scalar · INTEGER · read-write · current DHCP enable or disable. Default is off
| |||||||||||||||||
| Slt2sIp4Address | 1.3.6.1.4.1.35616.5.1.17 | IpAddress | RW | ||||||||||||||
scalar · IpAddress · read-write · current The agent's administrative IP address. The current operational IP address can be obtained from the ipAdEntAddr in the ipAddrTable. This parameter will take effect only after a agent restart or agent reset. This parameter will always be updated in the EEPROM. | |||||||||||||||||
| Slt2sIp4Mask | 1.3.6.1.4.1.35616.5.1.18 | IpAddress | RW | ||||||||||||||
scalar · IpAddress · read-write · current The agent's administrative IP subnet mask. The current operational IP subnet mask can be obtained from the ipAdEntMask in the ipAddrTable. This parameter will take effect only after a agent restart or agent reset. This parameter will always be updated in the EEPROM. | |||||||||||||||||
| Slt2sIp4Gateway | 1.3.6.1.4.1.35616.5.1.19 | IpAddress | RW | ||||||||||||||
scalar · IpAddress · read-write · current The agent's administrative default gateway IP address. The current operational IP default gateway IP address can be obtained from the ipRouteDest in the ipRouteTable. This parameter will take effect only after a agent restart or agent reset. This parameter will always be updated in the EEPROM. | |||||||||||||||||
| Slt2sIp4PrimaryDns | 1.3.6.1.4.1.35616.5.1.20 | IpAddress | RW | ||||||||||||||
scalar · IpAddress · read-write · current First DNS server address. | |||||||||||||||||
| Slt2sIp4SecondaryDns | 1.3.6.1.4.1.35616.5.1.21 | IpAddress | RW | ||||||||||||||
scalar · IpAddress · read-write · current Second DNS server address. | |||||||||||||||||
| Slt2sSnmpServer | 1.3.6.1.4.1.35616.5.1.22 | INTEGER | RW | ||||||||||||||
scalar · INTEGER · read-write · current
| |||||||||||||||||
| Slt2sHttpServer | 1.3.6.1.4.1.35616.5.1.23 | INTEGER | RW | ||||||||||||||
scalar · INTEGER · read-write · current
| |||||||||||||||||
| Slt2sTelnetServer | 1.3.6.1.4.1.35616.5.1.24 | INTEGER | RW | ||||||||||||||
scalar · INTEGER · read-write · current
| |||||||||||||||||
| Slt2sFtpServer | 1.3.6.1.4.1.35616.5.1.25 | INTEGER | RW | ||||||||||||||
scalar · INTEGER · read-write · current
| |||||||||||||||||
| Tlt2sMgmtPortTable | 1.3.6.1.4.1.35616.5.1.26 | NA | |||||||||||||||
table · not-accessible · current A list of management port entries. | |||||||||||||||||
| Rlt2sMgmtPortEntry | 1.3.6.1.4.1.35616.5.1.26.1 | NA | |||||||||||||||
row · not-accessible · current An entry containing information applicable to the management ports.
| |||||||||||||||||
| Clt2sMgmtPortId | 1.3.6.1.4.1.35616.5.1.26.1.1 | Integer32 (1..3) | RO | 1 | |||||||||||||
column · Integer32 (1..3) · read-only · current The management port identification. 1 Inband SFP, 2 LAN1, 3 LAN2. Example values from LibreNMS test devices
| |||||||||||||||||
| Clt2sMgmtPortName | 1.3.6.1.4.1.35616.5.1.26.1.2 | DisplayString | RO | Inband | |||||||||||||
column · DisplayString · read-only · current The name of the management port Example values from LibreNMS test devices
| |||||||||||||||||
| Clt2sMgmtPortEnable | 1.3.6.1.4.1.35616.5.1.26.1.3 | INTEGER | RW | enabled(2) | |||||||||||||
column · INTEGER · read-write · current The enabled state of the port.
Example values from LibreNMS test devices
| |||||||||||||||||
| Clt2sMgmtPortLink | 1.3.6.1.4.1.35616.5.1.26.1.4 | INTEGER | RO | up(2) | |||||||||||||
column · INTEGER · read-only · current The link state of the management port.
Example values from LibreNMS test devices
| |||||||||||||||||
| Clt2sMgmtPortSpeed | 1.3.6.1.4.1.35616.5.1.26.1.5 | INTEGER | RO | full1000(1) | |||||||||||||
column · INTEGER · read-only · current The speed mode of the port.
Example values from LibreNMS test devices
| |||||||||||||||||
| Clt2sMgmtPortTxBytes | 1.3.6.1.4.1.35616.5.1.26.1.6 | Integer32 (0..2147483647) | RO | 785214199 | |||||||||||||
column · Integer32 (0..2147483647) · read-only · current The total amount of sent bytes.
Example values from LibreNMS test devices
| |||||||||||||||||
| Clt2sMgmtPortRxBytes | 1.3.6.1.4.1.35616.5.1.26.1.7 | Integer32 (0..2147483647) | RO | 136131590 | |||||||||||||
column · Integer32 (0..2147483647) · read-only · current The total amount of received bytes.
Example values from LibreNMS test devices
| |||||||||||||||||
| Clt2sMgmtSfpPlugged | 1.3.6.1.4.1.35616.5.1.26.1.8 | INTEGER | RO | inserted(2) | |||||||||||||
column · INTEGER · read-only · current The line SFP plugged state of the port.
Example values from LibreNMS test devices
| |||||||||||||||||
| Clt2sMgmtSfpVendor | 1.3.6.1.4.1.35616.5.1.26.1.9 | DisplayString (SIZE (0..16)) | RO | FLEXOPTIX | |||||||||||||
column · DisplayString (SIZE (0..16)) · read-only · current The vendor name of the SFP. Example values from LibreNMS test devices
| |||||||||||||||||
| Clt2sMgmtSfpType | 1.3.6.1.4.1.35616.5.1.26.1.10 | DisplayString (SIZE (0..16)) | RO | S.B1612.40.LODL | |||||||||||||
column · DisplayString (SIZE (0..16)) · read-only · current The vendor part name of the SFP. Example values from LibreNMS test devices
| |||||||||||||||||
| Clt2sMgmtSfpSerial | 1.3.6.1.4.1.35616.5.1.26.1.11 | DisplayString (SIZE (0..16)) | RO | F78UZXW | |||||||||||||
column · DisplayString (SIZE (0..16)) · read-only · current The serial number of the SFP. Example values from LibreNMS test devices
| |||||||||||||||||
| Clt2sMgmtSfpWavelength | 1.3.6.1.4.1.35616.5.1.26.1.12 | DisplayString (SIZE (0..31)) | RO | CWDM 1490 | |||||||||||||
column · DisplayString (SIZE (0..31)) · read-only · current The SFP wavelength of the port. If the SFP is removed the object contains 'NA'. Example values from LibreNMS test devices
| |||||||||||||||||
| Clt2sMgmtSfpTxPower | 1.3.6.1.4.1.35616.5.1.26.1.13 | Integer32 (-1 | 0..2147483647) | RO | -2523 | |||||||||||||
column · Integer32 (-1 | 0..2147483647) · read-only · current The SFP transmit power of the port. If the SFP is removed, the value is -1.
Example values from LibreNMS test devices
| |||||||||||||||||
| Clt2sMgmtSfpRxPower | 1.3.6.1.4.1.35616.5.1.26.1.14 | Integer32 (-1 | 0..2147483647) | RO | -9926 | |||||||||||||
column · Integer32 (-1 | 0..2147483647) · read-only · current The SFP receive power of the port. If the SFP is removed, the value is -1.
Example values from LibreNMS test devices
| |||||||||||||||||
| Clt2sMgmtSfpLaserTemp | 1.3.6.1.4.1.35616.5.1.26.1.15 | Integer32 (-1 | 0..2147483647) | RO | 31 | |||||||||||||
column · Integer32 (-1 | 0..2147483647) · read-only · current The internal temperature of the SFP. If the SFP is removed, the value is -1.
Example values from LibreNMS test devices
| |||||||||||||||||
| Clt2sMgmtSfpLaserBias | 1.3.6.1.4.1.35616.5.1.26.1.16 | Integer32 (-1 | 0..2147483647) | RO | 14 | |||||||||||||
column · Integer32 (-1 | 0..2147483647) · read-only · current The SFP laser bias in milli ampere. If the SFP is removed, the value is -1.
Example values from LibreNMS test devices
| |||||||||||||||||
| Clt2sMgmtSfpTxLow | 1.3.6.1.4.1.35616.5.1.26.1.17 | Integer32 (-10..2) | RW | -6 | |||||||||||||
column · Integer32 (-10..2) · read-write · current The SFP laser TX low threshold in dBm.
Example values from LibreNMS test devices
| |||||||||||||||||
| Clt2sMgmtSfpTxHigh | 1.3.6.1.4.1.35616.5.1.26.1.18 | Integer32 (-4..8) | RW | 6 | |||||||||||||
column · Integer32 (-4..8) · read-write · current The SFP laser TX high threshold in dBm.
Example values from LibreNMS test devices
| |||||||||||||||||
| Clt2sMgmtSfpRxLow | 1.3.6.1.4.1.35616.5.1.26.1.19 | Integer32 (-30..0) | RW | -20 | |||||||||||||
column · Integer32 (-30..0) · read-write · current The SFP laser RX low threshold in dBm.
Example values from LibreNMS test devices
| |||||||||||||||||
| Clt2sMgmtSfpRxHigh | 1.3.6.1.4.1.35616.5.1.26.1.20 | Integer32 (-12..6) | RW | 3 | |||||||||||||
column · Integer32 (-12..6) · read-write · current The SFP laser RX high threshold in dBm.
Example values from LibreNMS test devices
| |||||||||||||||||
| Nlt2sSystem | 1.3.6.1.4.1.35616.5.2 | ||||||||||||||||
| Slt2sTemperature | 1.3.6.1.4.1.35616.5.2.1 | Integer32 (0..80) | RO | 31 | |||||||||||||
scalar · Integer32 (0..80) · read-only · current Shows the ambient temperature. Example values from LibreNMS test devices
| |||||||||||||||||
| Slt2sPowerType | 1.3.6.1.4.1.35616.5.2.2 | INTEGER | RO | ||||||||||||||
scalar · INTEGER · read-only · current The device's power supply 1 type.
| |||||||||||||||||
| Slt2sPowerStatus | 1.3.6.1.4.1.35616.5.2.3 | INTEGER | RO | ||||||||||||||
scalar · INTEGER · read-only · current The device's power supply 1 status.
| |||||||||||||||||
| Slt2sPowerFanStatus | 1.3.6.1.4.1.35616.5.2.4 | INTEGER | RO | on(2) | |||||||||||||
scalar · INTEGER · read-only · current The device's power supply 1's fan status.
Example values from LibreNMS test devices
| |||||||||||||||||
| Slt2sPowerFanRPM | 1.3.6.1.4.1.35616.5.2.5 | Integer32 (0..20000) | RO | 12060 | |||||||||||||
scalar · Integer32 (0..20000) · read-only · current The device's power supply 1's fan rounds per minute.
Example values from LibreNMS test devices
| |||||||||||||||||
| Slt2sPowerFanMode | 1.3.6.1.4.1.35616.5.2.6 | INTEGER | RW | alwaysOn(2) | |||||||||||||
scalar · INTEGER · read-write · current The device's power supply 1's fan mode.
Example values from LibreNMS test devices
| |||||||||||||||||
| Slt2sPowerFanOnTemp | 1.3.6.1.4.1.35616.5.2.7 | Integer32 (10..60) | RW | ||||||||||||||
scalar · Integer32 (10..60) · read-write · current The device's power supply 1's fan on temperature.
| |||||||||||||||||
| Slt2sPowerFanOffTemp | 1.3.6.1.4.1.35616.5.2.8 | Integer32 (10..60) | RW | ||||||||||||||
scalar · Integer32 (10..60) · read-write · current The device's power supply 1's fan off temperature.
| |||||||||||||||||
| Nlt2sPorts | 1.3.6.1.4.1.35616.5.3 | ||||||||||||||||
| Tlt2sPortTable | 1.3.6.1.4.1.35616.5.3.1 | NA | |||||||||||||||
table · not-accessible · current A list of port table entries. | |||||||||||||||||
| Rlt2sPortEntry | 1.3.6.1.4.1.35616.5.3.1.1 | NA | |||||||||||||||
row · not-accessible · current An entry containing information applicable to a particular port.
| |||||||||||||||||
| Clt2sPortId | 1.3.6.1.4.1.35616.5.3.1.1.1 | Integer32 (1) | RO | 1 | |||||||||||||
column · Integer32 (1) · read-only · current A unique value for each port. Example values from LibreNMS test devices
| |||||||||||||||||
| Clt2sPortEnable | 1.3.6.1.4.1.35616.5.3.1.1.2 | INTEGER | RW | enable(2) | |||||||||||||
column · INTEGER · read-write · current The status of the port.
Example values from LibreNMS test devices
| |||||||||||||||||
| Clt2sPortApsd | 1.3.6.1.4.1.35616.5.3.1.1.3 | INTEGER | RW | enabled(2) | |||||||||||||
column · INTEGER · read-write · current The automatic power shut down configuration of the port.
Example values from LibreNMS test devices
| |||||||||||||||||
| Clt2sPortSpeed | 1.3.6.1.4.1.35616.5.3.1.1.4 | INTEGER | RW | speed10g(2) | |||||||||||||
column · INTEGER · read-write · current The speed mode of the port.
Example values from LibreNMS test devices
| |||||||||||||||||
| Clt2sPortReset | 1.3.6.1.4.1.35616.5.3.1.1.5 | INTEGER | RW | no(1) | |||||||||||||
column · INTEGER · read-write · current Reset the port.
Example values from LibreNMS test devices
| |||||||||||||||||
| Clt2sPortLoop | 1.3.6.1.4.1.35616.5.3.1.1.6 | INTEGER | RW | off(1) | |||||||||||||
column · INTEGER · read-write · current Set Loop on chosen port.
Example values from LibreNMS test devices
| |||||||||||||||||
| Clt2sPortName | 1.3.6.1.4.1.35616.5.3.1.1.7 | DisplayString (SIZE (0..31)) | RW | Port 1 | |||||||||||||
column · DisplayString (SIZE (0..31)) · read-write · current The name of the port. Example values from LibreNMS test devices
| |||||||||||||||||
| Clt2sLinePlugged | 1.3.6.1.4.1.35616.5.3.1.1.8 | INTEGER | RO | plugged(2) | |||||||||||||
column · INTEGER · read-only · current The line SFP plugged state of the port.
Example values from LibreNMS test devices
| |||||||||||||||||
| Clt2sLineLink | 1.3.6.1.4.1.35616.5.3.1.1.9 | INTEGER | RO | up(2) | |||||||||||||
column · INTEGER · read-only · current The line SFP link state of the port.
Example values from LibreNMS test devices
| |||||||||||||||||
| Clt2sLineApsd | 1.3.6.1.4.1.35616.5.3.1.1.10 | INTEGER | RO | no(1) | |||||||||||||
column · INTEGER · read-only · current The automatic power shut down state of the line port.
Example values from LibreNMS test devices
| |||||||||||||||||
| Clt2sLineType | 1.3.6.1.4.1.35616.5.3.1.1.11 | DisplayString (SIZE (0..31)) | RO | P.B1696.20.AD | |||||||||||||
column · DisplayString (SIZE (0..31)) · read-only · current The line SFP type of the port. Example values from LibreNMS test devices
| |||||||||||||||||
| Clt2sLineWavelength | 1.3.6.1.4.1.35616.5.3.1.1.12 | DisplayString (SIZE (0..31)) | RO | CWDM 1270 | |||||||||||||
column · DisplayString (SIZE (0..31)) · read-only · current The line SFP wavelength of the port. If the line SFP is not plugged in, the object should contain the value of 'NA'. Example values from LibreNMS test devices
| |||||||||||||||||
| Clt2sLineTxPower | 1.3.6.1.4.1.35616.5.3.1.1.13 | Integer32 (-1 | 0..2147483647) | RO | 964 | |||||||||||||
column · Integer32 (-1 | 0..2147483647) · read-only · current The line SFP transmit power of the port. If the line SFP is not plugged in, the object should contain the value of -1.
Example values from LibreNMS test devices
| |||||||||||||||||
| Clt2sLineRxPower | 1.3.6.1.4.1.35616.5.3.1.1.14 | Integer32 (-1 | 0..2147483647) | RO | -6821 | |||||||||||||
column · Integer32 (-1 | 0..2147483647) · read-only · current The line SFP receive power of the port. If the line SFP is not plugged in, the object should contain the value of -1.
Example values from LibreNMS test devices
| |||||||||||||||||
| Clt2sLineLaserTemp | 1.3.6.1.4.1.35616.5.3.1.1.15 | Integer32 (-1 | 0..2147483647) | RO | 28 | |||||||||||||
column · Integer32 (-1 | 0..2147483647) · read-only · current The line SFP laser temperature of the port. If the line SFP is not plugged in, the object should contain the value of -1.
Example values from LibreNMS test devices
| |||||||||||||||||
| Clt2sLineLaserBias | 1.3.6.1.4.1.35616.5.3.1.1.16 | Integer32 (-1 | 0..2147483647) | RO | 25 | |||||||||||||
column · Integer32 (-1 | 0..2147483647) · read-only · current The line SFP laser bias of the port. If the line SFP is not plugged in, the object should contain the value of -1.
Example values from LibreNMS test devices
| |||||||||||||||||
| Clt2sLineTxLow | 1.3.6.1.4.1.35616.5.3.1.1.17 | Integer32 (-10..2) | RW | -6 | |||||||||||||
column · Integer32 (-10..2) · read-write · current The line SFP laser TX low threshold of the port.
Example values from LibreNMS test devices
| |||||||||||||||||
| Clt2sLineTxHigh | 1.3.6.1.4.1.35616.5.3.1.1.18 | Integer32 (-4..8) | RW | 6 | |||||||||||||
column · Integer32 (-4..8) · read-write · current The line SFP laser TX high threshold of the port.
Example values from LibreNMS test devices
| |||||||||||||||||
| Clt2sLineRxLow | 1.3.6.1.4.1.35616.5.3.1.1.19 | Integer32 (-30..0) | RW | -20 | |||||||||||||
column · Integer32 (-30..0) · read-write · current The line SFP laser RX low threshold of the port.
Example values from LibreNMS test devices
| |||||||||||||||||
| Clt2sLineRxHigh | 1.3.6.1.4.1.35616.5.3.1.1.20 | Integer32 (-12..6) | RW | 3 | |||||||||||||
column · Integer32 (-12..6) · read-write · current The line SFP laser RX high threshold of the port.
Example values from LibreNMS test devices
| |||||||||||||||||
| Clt2sClientPlugged | 1.3.6.1.4.1.35616.5.3.1.1.21 | INTEGER | RO | plugged(2) | |||||||||||||
column · INTEGER · read-only · current The client SFP plugged state of the port.
Example values from LibreNMS test devices
| |||||||||||||||||
| Clt2sClientLink | 1.3.6.1.4.1.35616.5.3.1.1.22 | INTEGER | RO | up(2) | |||||||||||||
column · INTEGER · read-only · current The client SFP link state of the port.
Example values from LibreNMS test devices
| |||||||||||||||||
| Clt2sClientApsd | 1.3.6.1.4.1.35616.5.3.1.1.23 | INTEGER | RO | no(1) | |||||||||||||
column · INTEGER · read-only · current The automatic power shut down state of the client port.
Example values from LibreNMS test devices
| |||||||||||||||||
| Clt2sClientType | 1.3.6.1.4.1.35616.5.3.1.1.24 | DisplayString (SIZE (0..31)) | RO | P.8596.02 | |||||||||||||
column · DisplayString (SIZE (0..31)) · read-only · current The client SFP type of the port. Example values from LibreNMS test devices
| |||||||||||||||||
| Clt2sClientWavelength | 1.3.6.1.4.1.35616.5.3.1.1.25 | DisplayString (SIZE (0..31)) | RO | 850 Multi Mode | |||||||||||||
column · DisplayString (SIZE (0..31)) · read-only · current The client SFP wavelength of the port. If the client SFP is not plugged in, the object should contain the value of 'NA'. Example values from LibreNMS test devices
| |||||||||||||||||
| Clt2sClientTxPower | 1.3.6.1.4.1.35616.5.3.1.1.26 | Integer32 (-1 | 0..2147483647) | RO | -3018 | |||||||||||||
column · Integer32 (-1 | 0..2147483647) · read-only · current The client SFP transmit power of the port. If the client SFP is not plugged in, the object should contain the value of -1.
Example values from LibreNMS test devices
| |||||||||||||||||
| Clt2sClientRxPower | 1.3.6.1.4.1.35616.5.3.1.1.27 | Integer32 (-1 | 0..2147483647) | RO | -4326 | |||||||||||||
column · Integer32 (-1 | 0..2147483647) · read-only · current The client SFP receive power of the port. If the client SFP is not plugged in, the object should contain the value of -1.
Example values from LibreNMS test devices
| |||||||||||||||||
| Clt2sClientLaserTemp | 1.3.6.1.4.1.35616.5.3.1.1.28 | Integer32 (-1 | 0..2147483647) | RO | 30 | |||||||||||||
column · Integer32 (-1 | 0..2147483647) · read-only · current The client SFP laser temperature of the port. If the client SFP is not plugged in, the object should contain the value of -1.
Example values from LibreNMS test devices
| |||||||||||||||||
| Clt2sClientLaserBias | 1.3.6.1.4.1.35616.5.3.1.1.29 | Integer32 (-1 | 0..2147483647) | RO | 6 | |||||||||||||
column · Integer32 (-1 | 0..2147483647) · read-only · current The client SFP laser bias of the port. If the client SFP is not plugged in, the object should contain the value of -1.
Example values from LibreNMS test devices
| |||||||||||||||||
| Clt2sClientTxLow | 1.3.6.1.4.1.35616.5.3.1.1.30 | Integer32 (-10..2) | RW | -6 | |||||||||||||
column · Integer32 (-10..2) · read-write · current The client SFP laser TX low threshold of the port.
Example values from LibreNMS test devices
| |||||||||||||||||
| Clt2sClientTxHigh | 1.3.6.1.4.1.35616.5.3.1.1.31 | Integer32 (-4..8) | RW | 6 | |||||||||||||
column · Integer32 (-4..8) · read-write · current The client SFP laser TX high threshold of the port.
Example values from LibreNMS test devices
| |||||||||||||||||
| Clt2sClientRxLow | 1.3.6.1.4.1.35616.5.3.1.1.32 | Integer32 (-30..0) | RW | -20 | |||||||||||||
column · Integer32 (-30..0) · read-write · current The client SFP laser RX low threshold of the port.
Example values from LibreNMS test devices
| |||||||||||||||||
| Clt2sClientRxHigh | 1.3.6.1.4.1.35616.5.3.1.1.33 | Integer32 (-12..6) | RW | 3 | |||||||||||||
column · Integer32 (-12..6) · read-write · current The client SFP laser RX high threshold of the port.
Example values from LibreNMS test devices
| |||||||||||||||||
| Nlt2sInfo | 1.3.6.1.4.1.35616.5.4 | ||||||||||||||||
| Slt2sTrapDetails | 1.3.6.1.4.1.35616.5.4.1 | DisplayString | RO | ||||||||||||||
scalar · DisplayString · read-only · current The trap description. | |||||||||||||||||
| Nlt2sCompliances | 1.3.6.1.4.1.35616.5.8 | ||||||||||||||||
| Mlt2sCompliance | 1.3.6.1.4.1.35616.5.8.1 | ||||||||||||||||
compliance · current Describes the requirements for conformance to the Lambdatrail2 MIB part. | |||||||||||||||||
| Nlt2sGroups | 1.3.6.1.4.1.35616.5.9 | ||||||||||||||||
| Glt2sAgentGroup | 1.3.6.1.4.1.35616.5.9.1 | ||||||||||||||||
group · current Grouping all LT2-S Agent parameters.
| |||||||||||||||||
| Glt2sSystemGroup | 1.3.6.1.4.1.35616.5.9.2 | ||||||||||||||||
group · current Grouping all LT2-S system parameters. | |||||||||||||||||
| Glt2sPortsGroup | 1.3.6.1.4.1.35616.5.9.3 | ||||||||||||||||
group · current Grouping all LT2-S port parameters.
| |||||||||||||||||
| Glt2sInfoGroup | 1.3.6.1.4.1.35616.5.9.4 | ||||||||||||||||
| Glt2sNotificationGroup | 1.3.6.1.4.1.35616.5.9.5 | ||||||||||||||||
group · current All the Traps the Lambdatrail2-S supports.
| |||||||||||||||||
Traps / Notifications
- lt2sClientLinkDown
1.3.6.1.4.1.35616.5.0.34 - lt2sClientLinkUp
1.3.6.1.4.1.35616.5.0.32 - lt2sClientLoopOff
1.3.6.1.4.1.35616.5.0.38 - lt2sClientLoopOn
1.3.6.1.4.1.35616.5.0.37 - lt2sClientPluggedIn
1.3.6.1.4.1.35616.5.0.28 - lt2sClientPluggedOut
1.3.6.1.4.1.35616.5.0.30 - lt2sFanFailure
1.3.6.1.4.1.35616.5.0.11 - lt2sFanOff
1.3.6.1.4.1.35616.5.0.10 - lt2sFanOn
1.3.6.1.4.1.35616.5.0.9 - lt2sLineLinkDown
1.3.6.1.4.1.35616.5.0.33 - lt2sLineLinkUp
1.3.6.1.4.1.35616.5.0.31 - lt2sLineLoopOff
1.3.6.1.4.1.35616.5.0.36 - lt2sLineLoopOn
1.3.6.1.4.1.35616.5.0.35 - lt2sLinePluggedIn
1.3.6.1.4.1.35616.5.0.27 - lt2sLinePluggedOut
1.3.6.1.4.1.35616.5.0.29 - lt2sMgmtAuthenticationFailure
1.3.6.1.4.1.35616.5.0.2 - lt2sMgmtLinkDown
1.3.6.1.4.1.35616.5.0.15 - lt2sMgmtLinkUp
1.3.6.1.4.1.35616.5.0.14 - lt2sMgmtRxHigh
1.3.6.1.4.1.35616.5.0.20 - lt2sMgmtRxLow
1.3.6.1.4.1.35616.5.0.19 - lt2sMgmtRxNormal
1.3.6.1.4.1.35616.5.0.21 - lt2sMgmtSfpPluggedIn
1.3.6.1.4.1.35616.5.0.12 - lt2sMgmtSfpPluggedOut
1.3.6.1.4.1.35616.5.0.13 - lt2sMgmtStartup
1.3.6.1.4.1.35616.5.0.1 - lt2sMgmtTxHigh
1.3.6.1.4.1.35616.5.0.17 - lt2sMgmtTxLow
1.3.6.1.4.1.35616.5.0.16 - lt2sMgmtTxNormal
1.3.6.1.4.1.35616.5.0.18 - lt2sPortDisabled
1.3.6.1.4.1.35616.5.0.23 - lt2sPortEnabled
1.3.6.1.4.1.35616.5.0.22 - lt2sPortReseted
1.3.6.1.4.1.35616.5.0.24 - lt2sPortRxHigh
1.3.6.1.4.1.35616.5.0.43 - lt2sPortRxLow
1.3.6.1.4.1.35616.5.0.42 - lt2sPortRxNormal
1.3.6.1.4.1.35616.5.0.44 - lt2sPortThermalShutdown
1.3.6.1.4.1.35616.5.0.25 - lt2sPortThermalWakeup
1.3.6.1.4.1.35616.5.0.26 - lt2sPortTxHigh
1.3.6.1.4.1.35616.5.0.40 - lt2sPortTxLow
1.3.6.1.4.1.35616.5.0.39 - lt2sPortTxNormal
1.3.6.1.4.1.35616.5.0.41 - lt2sPowerFailure
1.3.6.1.4.1.35616.5.0.8 - lt2sPowerNormal
1.3.6.1.4.1.35616.5.0.7 - lt2sPowerSupplyPluggedIn
1.3.6.1.4.1.35616.5.0.5 - lt2sPowerSupplyPluggedOut
1.3.6.1.4.1.35616.5.0.6 - lt2sTemperatureHigh
1.3.6.1.4.1.35616.5.0.3 - lt2sTemperatureNormal
1.3.6.1.4.1.35616.5.0.4