FORCE10-COPY-CONFIG-MIB
Force10 Networks, Inc.Force10 Copy Config MIB provides copying of running-config to to startup-config and vice-versa, and FTOS files to local disk or other system via ftp or tftp.
snmptranslate -m FORCE10-COPY-CONFIG-MIB -Tpsnmpwalk -v2c -c <community> -m FORCE10-COPY-CONFIG-MIB <host> 1.3.6.1.4.1.6027.3.5Imports
| FORCE10-SMI | f10Mgmt |
|---|---|
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | Bits, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso |
| SNMPv2-TC | DisplayString, PhysAddress, RowStatus, TEXTUAL-CONVENTION |
OID tree
| Name | OID | Type | Access | Status |
|---|---|---|---|---|
| If10CopyConfigMib | 1.3.6.1.4.1.6027.3.5 | |||
identity Force10 Copy Config MIB provides copying of running-config to to startup-config and vice-versa, and FTOS files to local disk or other system via ftp or tftp. | ||||
| Nf10CopyConfigObjects | 1.3.6.1.4.1.6027.3.5.1 | |||
| Nf10CopyConfig | 1.3.6.1.4.1.6027.3.5.1.1 | |||
| Tf10CopyTable | 1.3.6.1.4.1.6027.3.5.1.1.1 | NA | ||
table · not-accessible · current A table of config-copy requests. | ||||
| Rf10CopyEntry | 1.3.6.1.4.1.6027.3.5.1.1.1.1 | NA | ||
row · not-accessible · current A config-copy request.
To use this copy on NMS, user must first query the MIB.
if the query returns the result of the previous copied and
there is no pending copy operation, user can submit a SNMP
SET with a random number as index with the appropraite
information as specified by this MIB and the row status as
CreateAndGo.
The system will only keep the last 5 copy requests as the history.
If there are ten entries in the copy request table, the subsequent
copy request will replace the existing one in the copy table.
1) To copy running-config from local directory to startup-config. Set the following
mib objects in the copy table
copySrcFileType : runningConfig (2)
copyDestFileType : startupConfig (3)
2) To copy startup-config from local directory to a remote site. Set the following
mib objects in the copy table
copySrcFileType : startupConfig (3)
copyDestFileType : ftosFile (1)
copyDestFileLocation : ftp (4)
copyDestFileName : /user/tester1/ftp/
copyServerAddress : 172.20.10.123
copyUserName : tester1
copyUserPassword : mypasswd
3) To copy a file from local directory to a remote site. Set the following
mib objects in the copy table
copySrcFileType : ftosFile (1)
copySrcFileLocation : slot0 (2)
copySrcFileName : NVTRACE_LOG_DIR/LP4-nvtrace-0
copyDestFileType : ftosFile (1)
copyDestFileLocation : ftp (4)
copyDestFileName : /usr/tester1/trace/backup/LP4-nvtrace-0
copyServerAddress : 172.20.10.123
copyUserName : tester1
copyUserPassword : mypasswd
| ||||
| CcopyConfigIndex | 1.3.6.1.4.1.6027.3.5.1.1.1.1.1 | INTEGER | NA | |
column · INTEGER · not-accessible · current To initiate a config copy request, user should assign a positive random value as an index. | ||||
| CcopySrcFileType | 1.3.6.1.4.1.6027.3.5.1.1.1.1.2 | F10ConfigFileType | RW | |
column · F10ConfigFileType · read-write · current Specifies the type of file to copy from. if the copySrcFileType is runningConfig(2) or startupConfig(3), the default F10ConfigFileLocation is flash(1). If the copySrcFileType has the value of ftosFile(1), it is expected that the copySrcFileLocation and copySrcFileName must also be spcified. The three objects together will uniquely identify the source file. | ||||
| CcopySrcFileLocation | 1.3.6.1.4.1.6027.3.5.1.1.1.1.3 | F10ConfigFileLocation | RW | |
column · F10ConfigFileLocation · read-write · current Specifies the location of source file. If the copySrcFileType has the value of ftosFile(1), it is expected that the copySrcFileType and copySrcFileName must also be spcified. The three objects together will uniquely identify the source file. If the copySrcFileLocation has the value of ftp(4) or scp(5), it is expected the login information liked copyServerAddress, copyUserName, and copyUserPassword also be spcified. | ||||
| CcopySrcFileName | 1.3.6.1.4.1.6027.3.5.1.1.1.1.4 | DisplayString | RW | |
column · DisplayString · read-write · current The file name (including the path, if applicable) of the file. If copySourceFileType is set to runningConfig or startupConfig, copySrcFileName is not needed. | ||||
| CcopyDestFileType | 1.3.6.1.4.1.6027.3.5.1.1.1.1.5 | F10ConfigFileType | RW | |
column · F10ConfigFileType · read-write · current Specifies the type of file to copy to. if the copyDestFileType is runningConfig(2) or startupConfig(3), the default f10DestFileLocation is flash(1). If the copyDestFileType has the value of ftosFile(1), it is expected that the copyDestFileLocation and copyDestFileName must also be spcified. The three objects together will uniquely identify the destination file. | ||||
| CcopyDestFileLocation | 1.3.6.1.4.1.6027.3.5.1.1.1.1.6 | F10ConfigFileLocation | RW | |
column · F10ConfigFileLocation · read-write · current Specifies the location of destination file. If the copyDestFileType has the value of ftosFile(1), it is expected that the copyDestFileType and copyDestFileName must also be spcified. The three objects together will uniquely identify the destination file. If the copyDestFileLocation has the value of ftp(4) or scp(5), it is expected the login information liked copyServerAddress, copyUserName, and copyUserPassword also be spcified. | ||||
| CcopyDestFileName | 1.3.6.1.4.1.6027.3.5.1.1.1.1.7 | DisplayString | RW | |
column · DisplayString · read-write · current Specifies the location of destination file. If the copyDestFileType has the value of ftosFile(1), it is expected that the f10CopyDestFileTyp and copyDestFileLocation must also be spcified. The three objects together will uniquely identify the source file. If the copyDestFileLocation has the value of ftp(4) or scp(5), it is expected the login information liked copyServerAddress, copyUserName, and copyUserPassword also be spcified. | ||||
| CcopyServerAddress | 1.3.6.1.4.1.6027.3.5.1.1.1.1.8 | IpAddress | RW | |
column · IpAddress · read-write · current The ip address of the tftp server from (or to) which to copy the configuration file. Values of 0.0.0.0 or FF.FF.FF.FF for copyServerAddress are not allowed. If the copyDestFileLocation has the value of ftp(4) or scp(5), it is expected the login information liked copyServerAddress, copyUserName, and copyUserPassword also be spcified. | ||||
| CcopyUserName | 1.3.6.1.4.1.6027.3.5.1.1.1.1.9 | DisplayString (SIZE (1..15)) | RW | |
column · DisplayString (SIZE (1..15)) · read-write · current Remote user name for copy via ftp, or scp. If the copyDestFileLocation has the value of ftp(4) or scp(5), it is expected the login information liked copyServerAddress, copyUserName, and copyUserPassword also be spcified. | ||||
| CcopyUserPassword | 1.3.6.1.4.1.6027.3.5.1.1.1.1.10 | DisplayString (SIZE (1..15)) | RW | |
column · DisplayString (SIZE (1..15)) · read-write · current Password used by ftp, scp for copying a file to an ftp/scp server. If the copyDestFileLocation has the value of ftp(4) or scp(5), it is expected the login information liked copyServerAddress, copyUserName, and copyUserPassword also be spcified. | ||||
| CcopyState | 1.3.6.1.4.1.6027.3.5.1.1.1.1.11 | F10ConfigCopyState | RO | |
column · F10ConfigCopyState · read-only · current The state of config-copy operation. | ||||
| CcopyTimeStarted | 1.3.6.1.4.1.6027.3.5.1.1.1.1.12 | TimeTicks | RO | |
column · TimeTicks · read-only · current The timetick when the copy started. | ||||
| CcopyTimeCompleted | 1.3.6.1.4.1.6027.3.5.1.1.1.1.13 | TimeTicks | RO | |
column · TimeTicks · read-only · current The timetick when the copy completed. | ||||
| CcopyFailCause | 1.3.6.1.4.1.6027.3.5.1.1.1.1.14 | F10ConfigCopyFailCause | RO | |
column · F10ConfigCopyFailCause · read-only · current The reason a config-copy request failed. | ||||
| CcopyEntryRowStatus | 1.3.6.1.4.1.6027.3.5.1.1.1.1.15 | RowStatus | RW | |
column · RowStatus · read-write · current The state of the copy operation. Uses CreateAndGo when you are performing the copy. The state is set to active when the copy is completed. | ||||
| Nf10CopyConfigTraps | 1.3.6.1.4.1.6027.3.5.1.2 | |||
| NcopyAlarmMibNotifications | 1.3.6.1.4.1.6027.3.5.1.2.0 | |||
| !copyConfigCompleted | 1.3.6.1.4.1.6027.3.5.1.2.0.1 | |||
notification · current The agent generate this trap when a copy operational is completed.
| ||||
| NcopyAlarmVariable | 1.3.6.1.4.1.6027.3.5.1.2.1 | |||
| ScopyAlarmLevel | 1.3.6.1.4.1.6027.3.5.1.2.1.1 | INTEGER | AN | |
scalar · INTEGER · accessible-for-notify · current the message warning level | ||||
| ScopyAlarmString | 1.3.6.1.4.1.6027.3.5.1.2.1.2 | OCTET STRING | AN | |
scalar · OCTET STRING · accessible-for-notify · current An generic string value in the TRAP object | ||||
| ScopyAlarmIndex | 1.3.6.1.4.1.6027.3.5.1.2.1.3 | INTEGER | AN | |
scalar · INTEGER · accessible-for-notify · current the index of the current copy, copyAlarmIndex | ||||
Traps / Notifications
- copyConfigCompleted
1.3.6.1.4.1.6027.3.5.1.2.0.1