F10-IF-EXTENSION-MIB
Force10 Networks, Inc.Dell Networking OS IF Extenstion MIB.
snmptranslate -m F10-IF-EXTENSION-MIB -Tpsnmpwalk -v2c -c <community> -m F10-IF-EXTENSION-MIB <host> 1.3.6.1.4.1.6027.3.11Imports
| FORCE10-SMI | f10Mgmt |
|---|---|
| IF-MIB | ifIndex |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | Bits, Counter64, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso |
| SNMPv2-TC | DisplayString, PhysAddress, TEXTUAL-CONVENTION, TimeStamp, TruthValue |
OID tree
| Name | OID | Type | Access | Status |
|---|---|---|---|---|
| If10IfExtensionMib | 1.3.6.1.4.1.6027.3.11 | |||
identity Dell Networking OS IF Extenstion MIB. | ||||
| Nf10IfExtensionMibObject | 1.3.6.1.4.1.6027.3.11.1 | |||
| Nf10IfExtensionParams | 1.3.6.1.4.1.6027.3.11.1.1 | |||
| Tf10IfTable | 1.3.6.1.4.1.6027.3.11.1.1.1 | NA | ||
table · not-accessible · current Dell Networking OS Extension ifTable contains generic interface parameters. | ||||
| Rf10IfEntry | 1.3.6.1.4.1.6027.3.11.1.1.1.1 | NA | ||
row · not-accessible · current A row defintion of Dell Networking OS Interface Extension parameters.
| ||||
| Cf10IfIpMtu | 1.3.6.1.4.1.6027.3.11.1.1.1.1.1 | Unsigned32 (594..9252) | RW | |
column · Unsigned32 (594..9252) · read-write · current The IP (Internet Protocol), Maximum Transmission Unit value. | ||||
| Cf10IfDuplexMode | 1.3.6.1.4.1.6027.3.11.1.1.1.1.2 | INTEGER | RW | |
column · INTEGER · read-write · current Duplex mode of the interface. This will be read-write only for s60
| ||||
| Cf10IfQueueingStrategy | 1.3.6.1.4.1.6027.3.11.1.1.1.1.3 | DisplayString (SIZE (0..32)) | RO | |
column · DisplayString (SIZE (0..32)) · read-only · current Queueing strategy used for packets. | ||||
| Cf10IfRxFlowCtrl | 1.3.6.1.4.1.6027.3.11.1.1.1.1.4 | TruthValue | RW | |
column · TruthValue · read-write · current Flow control receive. This will be read-write only for s60 | ||||
| Cf10IfTxFlowCtrl | 1.3.6.1.4.1.6027.3.11.1.1.1.1.5 | TruthValue | RW | |
column · TruthValue · read-write · current Flow Control transmit.This will be read-only only for s60 | ||||
| Cf10IfDescr | 1.3.6.1.4.1.6027.3.11.1.1.1.1.6 | OCTET STRING (SIZE (0..241)) | RW | |
column · OCTET STRING (SIZE (0..241)) · read-write · current A textual string containing information about the interface. This will be read-write only for s60 | ||||
| Cf10IfAdminStatus | 1.3.6.1.4.1.6027.3.11.1.1.1.1.7 | INTEGER | RW | |
column · INTEGER · read-write · current A admin status of any interface. This will be read-write only for s60
| ||||
| Cf10IfRateInterval | 1.3.6.1.4.1.6027.3.11.1.1.1.1.8 | Unsigned32 (30..299) | RW | |
column · Unsigned32 (30..299) · read-write · current The rate info interval for the interface. This will be read-write only for s60 | ||||
| Cf10IfSpeed | 1.3.6.1.4.1.6027.3.11.1.1.1.1.9 | INTEGER | RW | |
column · INTEGER · read-write · current The interface's current bandwidth in bits per second. This will be read-write only for s60
| ||||
| Cf10IfPortListBitPos | 1.3.6.1.4.1.6027.3.11.1.1.1.1.10 | Integer32 | RO | |
column · Integer32 · read-only · current This is used for identifying the bit position in PortList Object for a given interface. | ||||
| Nf10IfExtensionStats | 1.3.6.1.4.1.6027.3.11.1.2 | |||
| Tf10IfStaticsTable | 1.3.6.1.4.1.6027.3.11.1.2.1 | NA | ||
table · not-accessible · current The statistcs information of the interfaces for performance monitoring. | ||||
| Rf10IfStaticsEntry | 1.3.6.1.4.1.6027.3.11.1.2.1.1 | NA | ||
row · not-accessible · current A row defintion of Dell Networking OS Extension interface statistics.
| ||||
| Cf10IfInVlanPkts | 1.3.6.1.4.1.6027.3.11.1.2.1.1.1 | Counter64 | RO | |
column · Counter64 · read-only · current The total number of valid VLAN Tagged frames received. | ||||
| Cf10IfIn64BytePkts | 1.3.6.1.4.1.6027.3.11.1.2.1.1.2 | Counter64 | RO | |
column · Counter64 · read-only · current The total number of frames (including bad frames) received that were 64 octets in length (excluding framing bits but in-cluding FCS octets). | ||||
| Cf10ifIn65To127BytePkts | 1.3.6.1.4.1.6027.3.11.1.2.1.1.3 | Counter64 | RO | |
column · Counter64 · read-only · current The total number of frames (including bad frames) received that were between 65 and 127 octets in length inclusive (ex-cluding framing bits but including FCS octets). | ||||
| Cf10IfIn128To255BytePkts | 1.3.6.1.4.1.6027.3.11.1.2.1.1.4 | Counter64 | RO | |
column · Counter64 · read-only · current The total number of frames (including bad frames) received that were between 128 and 255 octets in length inclusive (excluding framing bits but including FCS octets). | ||||
| Cf10IfIn256To511BytePkts | 1.3.6.1.4.1.6027.3.11.1.2.1.1.5 | Counter64 | RO | |
column · Counter64 · read-only · current The total number of frames (including bad frames) received that were between 256 and 511 octets in length inclusive (excluding framing bits but including FCS octets). | ||||
| Cf10IfIn512To1023BytePkts | 1.3.6.1.4.1.6027.3.11.1.2.1.1.6 | Counter64 | RO | |
column · Counter64 · read-only · current The total number of frames (including bad frames) received that were between 512 and 1023 octets in length inclusive (excluding framing bits but including FCS octets). | ||||
| Cf10IfInOver1023BytePkts | 1.3.6.1.4.1.6027.3.11.1.2.1.1.7 | Counter64 | RO | |
column · Counter64 · read-only · current The total number of frames received that were longer than 1023 (1025 Bytes in case of VLAN Tag) octets (excluding framing bits, but including FCS octets) and were otherwise well formed. This counter is not incremented for too long frames. | ||||
| Cf10IfInThrottles | 1.3.6.1.4.1.6027.3.11.1.2.1.1.8 | Counter64 | RO | |
column · Counter64 · read-only · current This counter is incremented when a valid frame with a length or type field value equal to 0x8808 (Control Frame) is re-ceived. | ||||
| Cf10IfInRunts | 1.3.6.1.4.1.6027.3.11.1.2.1.1.9 | Counter64 | RO | |
column · Counter64 · read-only · current The total number of frames received that were less than 64 octets long (excluding framing bits, but including FCS octets) and were otherwise well formed. | ||||
| Cf10IfInGiants | 1.3.6.1.4.1.6027.3.11.1.2.1.1.10 | Counter64 | RO | |
column · Counter64 · read-only · current The total number of frames received that were longer than 1518 (1522 Bytes in case of VLAN Tag) octets (excluding framing bits, but including FCS octets) and were otherwise well formed. This counter is not incremented for too long frames. | ||||
| Cf10IfInCRC | 1.3.6.1.4.1.6027.3.11.1.2.1.1.11 | Counter64 | RO | |
column · Counter64 · read-only · current The total number of frames received that had a length (ex-cluding framing bits, but including FCS octets) of between 64 and 1518 octets, inclusive, but had a bad CRC. | ||||
| Cf10IfInOverruns | 1.3.6.1.4.1.6027.3.11.1.2.1.1.12 | Counter64 | RO | |
column · Counter64 · read-only · current The total number of frames dropped because of buffer issue. | ||||
| Cf10IfOutVlanPkts | 1.3.6.1.4.1.6027.3.11.1.2.1.1.13 | Counter64 | RO | |
column · Counter64 · read-only · current The Number of Good VLAN Tagged Frames sent successfully. | ||||
| Cf10IfOutUnderruns | 1.3.6.1.4.1.6027.3.11.1.2.1.1.14 | Counter64 | RO | |
column · Counter64 · read-only · current The total number of frames dropped because of buffer underrun. | ||||
| Cf10IfOutUnicasts | 1.3.6.1.4.1.6027.3.11.1.2.1.1.15 | Counter64 | RO | |
column · Counter64 · read-only · current The Number of Good Unicast Frames sent successfully. | ||||
| Cf10IfOutCollisions | 1.3.6.1.4.1.6027.3.11.1.2.1.1.16 | Counter64 | RO | |
column · Counter64 · read-only · current A count of the frames that due to excessive or late collisions are not transmitted successfully. | ||||
| Cf10IfOutWredDrops | 1.3.6.1.4.1.6027.3.11.1.2.1.1.17 | Counter64 | RO | |
column · Counter64 · read-only · current A count of the frames that are dropped using WRED policy because of to excessive traffic. | ||||
| Cf10IfOut64BytePkts | 1.3.6.1.4.1.6027.3.11.1.2.1.1.18 | Counter64 | RO | |
column · Counter64 · read-only · current The Number of Good Frames sent successfully whose size was 64 Bytes. | ||||
| Cf10IfOut65To127BytePkts | 1.3.6.1.4.1.6027.3.11.1.2.1.1.19 | Counter64 | RO | |
column · Counter64 · read-only · current The Number of Good Frames sent successfully whose size was in the range of 65 to 127 Bytes. | ||||
| Cf10IfOut128To255BytePkts | 1.3.6.1.4.1.6027.3.11.1.2.1.1.20 | Counter64 | RO | |
column · Counter64 · read-only · current The Number of Good Frames sent successfully whose size was in the range of 128 to 255 Bytes. | ||||
| Cf10IfOut256To511BytePkts | 1.3.6.1.4.1.6027.3.11.1.2.1.1.21 | Counter64 | RO | |
column · Counter64 · read-only · current The Number of Good Frames sent successfully whose size was in the range of 256 to 511 Bytes. | ||||
| Cf10IfOut512To1023BytePkts | 1.3.6.1.4.1.6027.3.11.1.2.1.1.22 | Counter64 | RO | |
column · Counter64 · read-only · current The Number of Good Frames sent successfully whose size was in the range of 512 to 1023 Bytes. | ||||
| Cf10IfOutOver1023BytePkts | 1.3.6.1.4.1.6027.3.11.1.2.1.1.23 | Counter64 | RO | |
column · Counter64 · read-only · current The Number of Good Frames sent successfully whose size was greater than 1023 Bytes. | ||||
| Cf10IfOutThrottles | 1.3.6.1.4.1.6027.3.11.1.2.1.1.24 | Counter64 | RO | |
column · Counter64 · read-only · current This counter is incremented when a valid frame with a length or type field value equal to 0x8808 (Control Frame) is sent. | ||||
| Cf10IfLastDiscontinuityTime | 1.3.6.1.4.1.6027.3.11.1.2.1.1.25 | TimeStamp | RO | |
column · TimeStamp · read-only · current The value of sysUpTime on the most recent occasion at which this interface's counters suffered a discontinuity via a reset. If no such discontinuities have occurred since the last reinitialization of the local management subsystem, then this object contains a zero value. | ||||
| Cf10IfInCentRate | 1.3.6.1.4.1.6027.3.11.1.2.1.1.26 | Integer32 (0..100) | RO | |
column · Integer32 (0..100) · read-only · current This is the ingress rate in percentage. This is an integer value which can go from 0 to 100. | ||||
| Cf10IfOutCentRate | 1.3.6.1.4.1.6027.3.11.1.2.1.1.27 | Integer32 (0..100) | RO | |
column · Integer32 (0..100) · read-only · current This is the egress rate in percentage. This is an integer value which can go from 0 to 100. | ||||
| Nf10IfExtensionMibConformance | 1.3.6.1.4.1.6027.3.11.2 | |||
| Nf10IfExtensionMibCompliances | 1.3.6.1.4.1.6027.3.11.2.1 | |||
| Mf10IfExtensionMibCompliance | 1.3.6.1.4.1.6027.3.11.2.1.1 | |||
compliance · current The compliance statement for Dell Networking OS IF Extension MIB.
| ||||
| Nf10IfExtensionMibGroups | 1.3.6.1.4.1.6027.3.11.2.2 | |||
| Gf10IfParamsGroup | 1.3.6.1.4.1.6027.3.11.2.2.1 | |||
group · current A collection of objects providing the Dell Networking OS IF Extenstion parameters. | ||||
| Gf10IfStatsGroup | 1.3.6.1.4.1.6027.3.11.2.2.2 | |||
group · current A collection of objects providing the interface statistics.
| ||||